New features of this electric vehicle alarm:

New features of this electric vehicle alarm:
SOS-COM1 Manual
Real Time tracker & alarm
Important, please attention:
This real time tracker & alarm was designed for home
and asset location and communication, our company
assumes no liability or responsibility for any behaviors
violate other individual’s privacy.
 Due to external factors all GSM devices have position
error, so the position provide by this device just for
reference only.
 There may be delays caused by telecom operators at
certain circumstance. Our company doesn’t assume
liability for users’ personal and property safety
Accessories
1* Main Host
1*USB cable 1* Sling
Indicator light show:
1* Watch strap
1* User manual
Product View:
Blue
Yellow

Main Features:











GSM quad band network, GPS location
Website/IOS APP/Android APP/SMS ;multiple set and
tracking
Push button SOS alarm
Click to call
SOS alarm
Ring tone+ Vibrate remind
Two way Hi-Fi audio communication
Hand-free talk
Activity monitor
Low battery alarm
SIM changing alarm
Product specification:
GSM network: 850/900/1800/1900MHz
GPRS standard: Class 12, TCP/IP
 GPS locating time:
a) 30sec with cold boot(under the open sky)
b) 29sec with warm boot(under the open sky)
c) 5sec with hot boot (under the open sky)
 GPS Positioning accuracy: 10-15m(open sky)
 Working temperature: -20℃ ~ +70℃
 Working humidity: 5% ~ 95% RH
 Host size: 40x34 x14mm
 Host weight: 27g


Color
Function
Fast Flash
GPS
Indicator
GSM
Indicator
GPS
Searching
GSM
Searching
GPS
Success
GSM
Success
Close
GPS
Sleeping
GSM
Sleeping
Answer incoming call:
Item
Function
Item
Function
1
Reboot hole
2
Power on/off
Press key 1,2 and S will answer the incoming call, press
power key will refuse the incoming call.
Make a call out:
Press key 1, it will make a call to SOS1 number.
Press key 2, it will make a call to SOS2 number.
Press key S for 5seconds, then SOS1 and SOS2 will
get a SOS SMS alarm, and the device also call all presetting number 2 times in turn.
3
USB charger hole
4
Button 1
Step3: APP binding and function setting:
5
GSM indicator light
6
SOS button
7
GPS indicator light
8
Button 2
9
SIM card slot
10
Microphone
11
Loudspeaker
12
Hang rope hole
1. Scan the User manual cover QR code or search the
anytracking in App store & Google play store to install
the App.
2. Enter the ID number and password to login, the
default password is 123456.
3. Confirm the device online, the corresponding
instruction set can be achieved.
4. APP function introduction
Step 1: Prepare for work:
Please choose GSM network-based Micro-SIM card
(same as Iphone4) for the product. And please note:
 Please be sure the tracker is turn off before insert or
take out the Micro-SIM.
 Please be sure the GPRS and Caller ID has been
activated
Step 2: Power on/off
Press power button 3 second, when indicator flash it
means power on, when indicator light flash fast, it
show the tracker search network successfully .
Real-time tracking: show the last position and
trace.
 Historical route: display the historical.
 Geo-fence: set and display Geo-fence area, when
the device get into or get out the Geo-fence then it will
send an alert SMS.
 Command setting
 Device info: check and mark the device information.
 Change password: change the App and web login
password.
 SOS1 phone number: button S phone number, also
the master phone number, used to send command and
receive alarm.
 White list number: the other SOS number, also allow
to remote listening.

Slow
Flash

Alarm mode:
a) Silent monitoring
mode:
All have set 5 phone
numbers dialing the device;
you can remote listen to the
voices around the device at
the condition of no bell ring,
but can’t speak to the
device the user.
b) Auto answer mode:
All have set 5 phone
numbers dialing the device,
after a bell ring, you can
remote listen to the voice
around the device and speak to the user
c) Push to talk mode:
Any number dialing the device number, only after the
user press the button, you can speak to the device user
 Language of SMS:
Choose SMS language, the device provide three
languages: Chinese, English and French
 Time zones:
This is for App time, the factory default is UTC+08:00;
users can set it according to local time zone.
 Device message: display the alert list.
 Alarm setting: get the remind via APP when alarm
 Logout: logout the APP, and never get the alarm
remind via APP
All functions also can set by SMS command
All command use in lowercase letters, without any blank
space and ending by #.
Command for setting master number:
password,sos1,phone number#
For example:123456,sos1,180********#
The tracker will reply: 180******** has been set for the
master number successfully.
Note: All SMS setting must send via SOS1
number.
Remark:
1. The tracker will boot automatically when it was
charging. Please put the tracker in network signal better
position when use.
2. The new machines need to be recharged for 2-3
hours before use in order to achieve the best results.
3. Standby time:
1) Upload location data every 10 minutes, the standby
time is about 72 hours, talking time is 5-8 hours (Actual
test)
2) Close the real time tracking function, it can be
standby 280hours (about 12days)
Note: Above test data is under the status of strong GSM
network
4. Please charging and boot with SIM card, the device
will automatically reboot when it can’t search GSM
network.
5. This product is not waterproof, please pay attention
when using.
FAQs
Q: After inserting a SIM card, it can make a call,
but it display not enable on the platform and
APP?
A: Please check that SIM Card has activated GPRS data
plan.
Q: When I make call to the device from white list
number, why it is not auto-answer my call?
A: Please check that SIM Card has activated caller ID.
Q: Device show online, but it shows “wait for the
device responses” when you set instruction with
APP.
A: a. Device signal is not good, so not smooth result of
GPRS
b. Device is busy.
Q: The SIM card has activated GPRS data plan,
but the device still not online.
The tracker have pre-program all most APN, maybe the
APN of the SIM card you use don’t preset in the tracker,
please find the apndata from the SIM card
company ,then send command to add the apn data into
the tracker.
The command is: apn,apndata#
Q: Why is the RF - V16 radiation would be so low?
A: For the children's health, V16 reduced the GSM
antenna power; power is proportional to the radiation,
the greater power the higher radiation. General phone
power is 33 db, is the biggest power of V16 is 27 db,
radiation double every 2 db , so when the mobile phone
have a cell signal V16 might not have signal.
Q: I sent dw# command to V16, the device send
me tracking after 1-2 minutes, why so slowly?
A: because the V16 is GPS device, it’s only to start the
GPS after receiving the order, so it need a little long
time.
Command for SMS setting
Command
Function
password,t,
password
password,so
s1,
number#
sos2(3,4,5),
number#
Change the password, factory default is
123456.
callvib,1#
Turn on vibrate alert (factory default)
callvib,0#
Turn off vibrate alert
aj#
Set push to answer incoming call (factory
default)
mt#
Auto-answer and hand free incoming call
jy#
Silence monitoring
dw#
Check the position
dsp#
Check the device work situation
lag,1#
Change the language to Chinese(factory
default)
lag,2#
Change the language to English
lag,3#
Change the language to French.
tim,digital#
Setting interval of the position data upload
the unit is minutes
gon#
Turn on the tracking function(factory default)
goff#
Turn off the tracking function
lon#
Turn on the Indicator light (factory default)
loff#
Turn off the indicator light
dndoff#
dndon#
Set master number
Set sos2 number
Turn off DO NOT DISTURB in push-to-talk
mode (factory default)
Turn on DO NOT DISTURB in push-to-talk
mode
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement