advertisement
• Heavy duty 15” cast aluminium frame with extra wide flange for increased rigidity
• Woofer
• Field replaceable magnet for touring applications
• 500W RMS
• 4” copper voice coil assembly
• 125 oz. ceramic magnet
• A B/L in excess of 29 T/m for fast accurate lows
PD.154
Designed as an extremely powerful low frequency transducer for bass and compact bass applications.
Equally at home in drum fill and stage monitor wedges where exceptional low frequency performance makes the PD.154 an ideal choice. Also suitable for bass guitar applications.
Ideal for three-way direct radiating systems in which the powerful bass response comes into its own.
Response & Impedance Detail
Specifications
Nominal Diameter
Power rating 1
Frequency range
Nominal Impedance
38cm (15”)
500 Watts
40Hz - 2 kHz
4, 8 or 16 Ohms
Sensitivity
Resonance
2 (1 W 1 M)
Enc. Vol. Recommended
Displacement limit (peak-peak)
Voice coil diameter
Voice coil
Voice coil winding depth
Magnet gap depth
Magnet material/mass
Flux Density
Suspension (Spider)
99 dB
40 Hz
80 to 200 Litres
22 mm (0.88”)
101 mm (4.04”)
Copper
22 mm (0.88”)
11 mm (0.44”)
Ceramic/3.5 Kg (125 oz.)
1.1 T
Fabric
Cone/Surround Paper/Fabric
Dust dome Paper
Notes
1. AES Standard (40 to 400 Hz) Program 1000 Watts
2. AES Recommended Practice.
Thiele - Small Parameters
Fs
Revc
Qts
Qms
Vas
Qes
Mms
Sd
Cms
BL
Xmax
Vd
No
Pmx
Notes
3. Thiele - Small Parameters follow a 500 Watt preconditioning period.
39 Hz
6.2 Ohms
0.205
4.32
149 Litres
0.216
125 grams
890 sq cm
133 µM/N
29.65 T/m
7.7 mm
5.78 x10 -4 m 3
3.94%
500 Watts
Mechanical Data
Dimensions in mm
394
11
Nett Weight
13.0 Kg
(28.73 Lbs.)
352
Response measured in a half space environment using a vented enclosure of 107 litres.
Sovereign House Gilcar Way Wakefield Europort Castleford WF10 5QS England Tel +44 (0)1924 224610 Fax +44 (0)1924 899166 Email [email protected] www.precision-devices.com
PD.154
6 Fixing holes M6
8 Concealed M6
407 161
Shipping weight
14.0 Kg (30.94 Lbs.)
Precision Devices operate a policy of continuous research and development. The implementation of new materials or production methods will always equal or exceed the published specifications, which may change without notice. Details shown on this sheet are correct at time of printing. March 2008
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project