Rosemount DP Level Transmitters and 1199 Remote Seals

Rosemount DP Level Transmitters and 1199 Remote Seals
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Rosemount DP Level Transmitters and
1199 Remote Seals
FOR ROSEMOUNT 3051S, 3051, AND 2051
TRANSMITTERS
APPLICATIONS
• Level, Flow, Pressure, Interface, Density
• Extreme hot and cold temperatures
• Corrosive, clogging, or viscous processes
• Hygienic requirements
• Special process connections
Contents
Proven, Reliable, and Innovative DP Level Technologies . . . . . . . . . . . . . . . . . . . . . page 2
Ordering Information
Rosemount 3051S Electronic Remote Sensors . . . . . . . . . . . . . . . . . . . . . . . page 4
Rosemount 3051S Liquid Level Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . page 13
Rosemount 3051L Liquid Level Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . page 31
Rosemount 2051L Liquid Level Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . page 36
Rosemount 1199 Direct Mount Seal Systems. . . . . . . . . . . . . . . . . . . . . . . . page 36
Rosemount 1199 Remote Mount Seal Systems . . . . . . . . . . . . . . . . . . . . . . page 41
Flanged Seal Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 47
Threaded Seal Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 62
Hygienic Seal Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 66
Specialty Seal Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 74
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 79
Product Certifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 91
Dimensional Drawings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 104
www.rosemount.com
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Proven, Reliable, and Innovative DP Level Technologies
To meet your application requirements, Rosemount DP level technologies deliver an unsurpassed product offering
that is easy to specify, order, and install. The offering includes a wide variety of process connections, direct mount
or capillary connections, and materials of construction to address almost any application. If you don’t see what you
need listed here, ask us. We can create a custom engineered solution to meet your needs.
Rosemount Level Transmitters
Level transmitters combine world-class Rosemount pressure instrumentation with direct-mount seals, all in a single
integrated model number.
Rosemount 3051SAL, 3051L, and 2051L Liquid Level
Transmitters
• Achieve best-in-class system reliability with All-Welded systems
• Wireless configurations provide new data access
• Connect to virtually any process with a comprehensive offering of
process connections, fill fluids, direct mount or capillary
connections, and materials
• Quantify and optimize total system performance with QZ option
Balanced System
Tuned-System Assembly
Tuned-System™ Assemblies Optimize Results
• Reduce installed costs by 20% by eliminating excess capillary and
transmitter mounting hardware
• Improve performance by up to 30%
• Increase response time by up to 80%
• Reduce risk with up-front quantified performance reports
System with 2 equal
lengths of capillary
System with direct
mount plus capillary
Rosemount Electronic Remote Sensors
The Rosemount 3051S ERS System is a new digital DP Level architecture that links two 3051S pressure sensors
together electronically. Differential pressure, level, and volume is calculated and transmitted using a standard
two-wire 4-20 mA HART signal.
A Digital Upgrade to a Proven Technology
• 90% improvement in time response
• Elimination of temperature effects and measurement drift
• MultiVariable capabilities including DP, PLO, PHI, Volume, and Level
• Proven 3051S sensor technology
Simplified Installations and Maintenance Routines
• Elimination of wet legs or dry legs
• Easy installations without need for heat tracing and insulation
• Proactive maintenance and troubleshooting with sensor alerts and diagnostics
• Simplified inventories with sensors and standard cable
2
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Rosemount 1199 Seal Systems
A seal system consists of a pressure transmitter, one or two seals, a fill fluid, and either a direct mount or capillary
style connection. Seal systems provide a reliable process pressure measurement and prevent the process medium
from contacting the transmitter diaphragm. Transmitter/diaphragm seal systems should be considered when:
•
The process temperature is outside of the operating ranges of the transmitter.
•
The process is corrosive and/ or requires specific exotic materials of construction.
•
The process contains suspended solids or is viscous and is prone to plugging of connections.
•
The application requires the use of flush-mount Hygienic connections that facilitates CIP/SIP service.
•
There is a requirement for easier cleaning of the process from the connections to avoid contamination
between batches.
Application Flexibility
•
Flanged, threaded, and hygienic process connections
•
Meets industry standards such as EN 1092-1, ANSI/ASME
B16.5, JIS B2238, ANSI/ASME B1.20.1, EN 10226-1, and
3-A Standard 74-03
•
Variety of fill fluids including cold temperature
(-102 °F / -75 °C), hot temperature (599 °F / 315 °C), and
hygienic & food grade
•
Three different capillary diameters allow for optimization of
accuracy and time response
Reliable System Construction
•
Welded design with no threaded connections
•
100% Helium leak tested
•
Advanced manufacturing techniques ensure air-free,
leak-tight system that is stable over time
•
Reliable operation in full vacuum applications
Robust Seal Design
•
Backup convolutions on the diaphragm protect
seal integrity
•
Recessed diaphragms reduce potential for
handling damage
•
Advanced welding techniques improve reliability
SST Armored, PVC Coated,
Support Tube with Closed End
(Ordering Codes M, N, and P)
SST Armored, Support Tube
(Ordering Codes H, J, and K)
SST Armored, PVC Coated
(Ordering Codes E, F, and G)
SST Armored
(Ordering Codes B, C, and D)
3
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Rosemount 3051S Electronic Remote Sensors
The 3051S ERS™ System is a flexible, 2-wire 4-20 mA HART
architecture that calculates differential pressure (DP) electronically
using two pressure sensors that are linked together with a
non-proprietary electrical wire.
Ideal applications for the 3051S ERS System include tall vessels and
distillation columns that have traditionally required long lengths of
capillary or impulse piping. When used in these types of applications,
the 3051S ERS System can deliver:
1
Secondary
3051SAM
•
More accurate and repeatable DP measurements
•
Faster time response
•
Simplified installations
•
Reduced maintenance
How to Order
Coplanar
In-Line
1. Choose two ERS transmitter models. These may be any
combination of 3051SAM and 3051SAL models.
2
3051SAL
Primary
Coplanar
3
In-Line
3051SAL1PG4AA1A1020DFF71DA00M5
3051SAM1ST2A2E11A2A
2. Decide which model will be the ERS Primary (4-20 mA loop
termination and optional LCD) and which will be the ERS
Secondary. This will be specified by the “Configuration Type”
code in each model number.
3. Specify two full model numbers per the desired configuration.
Additional Information
Specifications: page 79
Certifications: page 95
Dimensional Drawings: page 104
Rosemount 3051SAM Transmitter for ERS Applications
• Coplanar and In-Line sensor module platforms
• Variety of process connections including threaded NPT, flanges, manifolds, and 1199 remote
seals
• Available with 10-year stability and limited 12-year warranty
Table 1. 3051SAM Scalable Advanced Measurement Transmitter for ERS Applications Ordering Information
★ The Standard offering represents the most common models and options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Model
Transmitter Type
3051SAM Scalable Advanced Measurement Transmitter
Performance Class
Standard
1
Ultra: 0.025% span accuracy, 200:1 rangedown, 10-year stability, 12-year limited warranty
2
Classic: 0.055% span accuracy, 100:1 rangedown, 5-year stability
Configuration Type
Standard
P
Electronic Remote Sensor - Primary
S
Electronic Remote Sensor - Secondary
4
Standard
★
★
Standard
★
★
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Table 1. 3051SAM Scalable Advanced Measurement Transmitter for ERS Applications Ordering Information
★ The Standard offering represents the most common models and options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Pressure Module Type
Standard
G
Coplanar
T
In-Line
E
In-Line
Expanded
A
Coplanar
Pressure Range(1)
Coplanar Gage
Standard
1A
N/A
2A
3A
4A
5A
-250 to 250 inH2O
(-623 to 623 mbar)
-393 to 1000 inH2O
(-0,98 to 2,49 bar)
-14.2 to 300 psig
(-0,98 to 20,7 bar)
-14.2 to 2000 psig
(-0,98 to 137,9 bar)
Pressure Sensor Type
Standard
★
★
★
Gage
Gage
Absolute
Absolute
In-Line Gage
In-Line Absolute
Coplanar Absolute
-14.7 to 30 psig
(-1,0 to 2,06 bar)
-14.7 to 150 psig
(-1,0 to 10,34 bar)
-14.7 to 800 psig
(-1,0 to 55,2 bar)
-14.7 to 4000 psig
(-1,0 to 275,8 bar)
-14.7 to 10000 psig
(-1,0 to 689,5 bar)
0 to 30 psia
(0 to 2,06 bar)
0 to 150 psia
(0 to 10,34 bar)
0 to 800 psia
(0 to 55,2 bar)
0 to 4000 psia
(0 to 275,8 bar)
0 to 10000 psia
(0 to 689,5 bar)
0 to 30 psia
(0 to 2,06 bar)
0 to 150 psia
(0 to 10,34 bar)
0 to 800 psia
(0 to 55,2 bar)
0 to 4000 psia
(0 to 275,8 bar)
N/A
Isolating Diaphragm
Standard
2(2)
316L SST
3(2)
Alloy C-276
Expanded
4(3)
Alloy 400
5(3)(4)
Tantalum
6(3)
Gold-plated Alloy 400 (includes Graphite-Filled PTFE O-Ring)
7(3)
Gold-plated 316L SST
Process Connection
Coplanar Module Type
In-Line Module Type
Standard
000
None
N/A
A11(5)
Assemble to Rosemount 305 Manifold
Assemble to Rosemount 306 Manifold
A12(5)
Assemble to Rosemount 304 or AMF Manifold with SST N/A
Traditional Flange
B11(5)(6)
Assemble to One Rosemount 1199 Remote Diaphragm
Assemble to One Rosemount 1199 Remote Diaphragm
Seal with SST transmitter flange
E11
Coplanar Flange (CS), ¼-18 NPT, 316 SST Drain Vents
½ -14 NPT Female
E12
Coplanar Flange (SST), ¼-18 NPT, 316 SST Drain Vents N/A
E13(2)
Coplanar Flange (Cast C-276), ¼-18 NPT, Alloy C-276
N/A
Drain Vents
E14
Coplanar Flange (Cast Alloy 400), ¼-18 NPT, Alloy
N/A
400/K-500 Drain Vents
E15(2)
Coplanar Flange (SST), ¼-18 NPT, Alloy C-276 Drain
N/A
Vents
E16(2)
Coplanar Flange (CS), ¼-18 NPT, Alloy C-276 Drain
N/A
Vents
E21
Coplanar Flange (CS), RC ¼, 316 SST Drain Vents
N/A
E22
Coplanar Flange (SST), RC ¼, 316 SST Drain Vents
N/A
E23(2)
Coplanar Flange (Cast C-276), RC ¼, Alloy C-276 Drain N/A
Vents
E24
Coplanar Flange (Cast Alloy 400), RC ¼, alloy 400/K-500 N/A
Drain Vents
E25(2)
Coplanar Flange (SST), RC ¼, Alloy C-276 Drain Vents
N/A
E26(2)
Coplanar Flange (CS), RC ¼, Alloy C-276 Drain Vents
N/A
F12
Traditional Flange (SST), 1/4-18 NPT, 316 SST Drain
N/A
Vents
Standard
★
★
★
★
★
Standard
★
★
Standard
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
5
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Table 1. 3051SAM Scalable Advanced Measurement Transmitter for ERS Applications Ordering Information
★ The Standard offering represents the most common models and options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
F13(2)
F14
F15(2)
F22
F23(2)
F24
F25(2)
F52
G11
G12
G21
G22
G31
G41
Traditional Flange (Cast C-276), 1/4-18 NPT, Alloy C-276
Drain Vents
Traditional Flange (Cast Alloy 400), 1/4-18 NPT, Alloy
400/K-500 Drain Vents
Traditional Flange (SST), 1/4-18 NPT, Alloy C-276 Drain
Vents
Traditional Flange (SST), RC ¼, 316 SST Drain Vents
Traditional Flange (Cast C-276), RC ¼, Alloy C-276 Drain
Vents
Traditional Flange (Cast Alloy 400), RC ¼, Alloy
400/K500 Drain Vents
Traditional Flange (SST), RC ¼, Alloy C-276 Drain Vents
DIN-Compliant Traditional Flange (SST), ¼-18 NPT, 316
Drain Vents, 7-16-in. Bolting
Vertical Mount Level Flange (SST), 2-in ANSI Class 150,
316 SST Drain Vents
Vertical Mount Level Flange (SST), 2-in ANSI Class 300,
316 SST Drain Vents
Vertical Mount Level Flange (SST), 3-in ANSI Class 150,
316 SST Drain Vents
Vertical Mount Level Flange (SST), 3-in ANSI Class 300,
316 SST Drain Vents
Vertical Mount Level Flange (SST), DIN-DN 50 PN 40,
316 SST Drain Vents
Vertical Mount Level Flange (SST), DIN-DN 80 PN 40,
316 SST Drain Vents
Expanded
F11
Traditional Flange (CS), ¼-18 NPT, 316 SST Drain /
Vents
F32
Bottom Vent Traditional Flange (SST), ¼-18 NPT, 316
SST Drain Vents
F42
Bottom Vent Traditional Flange (SST), RC ¼, 316 SST
Drain Vents
F62
DIN-Compliant Traditional Flange (316 SST), ¼-18 NPT,
316 Drain Vents, M10 Bolting
F72
DIN-Compliant Traditional Flange (316 SST), ¼-18 NPT,
316 Drain Vents, M12 Bolting
Transmitter Output
Standard
A
4–20 mA with digital signal based on HART protocol
Housing Style
Material
Standard
Housings for ERS Primary - Configuration Type code P
1A
PlantWeb Housing
Aluminum
1B
PlantWeb Housing
Aluminum
1J
PlantWeb Housing
SST
1K
PlantWeb Housing
SST
2E
Junction Box with Remote Display Output Aluminum
2F
Junction Box with Remote Display Output Aluminum
2M
Junction Box with Remote Display Output SST
Housings for ERS Secondary - Configuration Type code S
2A
Junction Box
Aluminum
2B
Junction Box
Aluminum
2J
Junction Box
SST
Expanded
Housings for ERS Primary - Configuration Type code P
1C
PlantWeb Housing
Aluminum
1L
PlantWeb Housing
SST
2G
Junction Box with Remote Display Output Aluminum
6
N/A
★
N/A
★
N/A
★
N/A
N/A
★
★
N/A
★
N/A
N/A
★
★
G ½ A DIN 16288 Male (Range 1-4 Only)
★
N/A
★
N/A
★
N/A
★
N/A
★
N/A
★
Non-Threaded Instrument Flange (I-Flange)
N/A
N/A
N/A
N/A
Standard
★
Conduit Entry Size
Standard
1
/2–14 NPT
M20 x 1.5 (CM 20)
1/2–14 NPT
M20 x 1.5 (CM 20)
1
/2–14 NPT
M20 x 1.5 (CM 20)
1
/2–14 NPT
★
★
★
★
★
★
★
1
★
★
★
/2–14 NPT
M20 x 1.5 (CM 20)
1/2–14 NPT
G1/2
G1/2
G1/2
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Table 1. 3051SAM Scalable Advanced Measurement Transmitter for ERS Applications Ordering Information
★ The Standard offering represents the most common models and options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Housings for ERS Secondary - Configuration Type code S
2C
Junction Box
Aluminum
G1/2
Options (Include with selected model number)
Electronic Remote Sensor Connection Cable
Standard
R05
50 ft. (15.2 m) Spool of Electronic Remote Sensor Cable
R10
100 ft. (30.5 m) Spool of Electronic Remote Sensor Cable
Mounting Bracket
Standard
B1(3)
Traditional flange bracket, CS, 2-in. pipe
B2(3)
Traditional flange bracket, CS, panel
B3(3)
Traditional flange flat bracket, CS, 2-in. pipe
B4
Bracket, all SST, 2-in. Pipe and Panel
B7(3)
Traditional flange bracket, B1 with SST bolts
B8(3)
Traditional flange bracket, B2 with SST bolts
B9(3)
Traditional flange bracket, B3 with SST bolts
BA(3)
Traditional flange bracket, B1, all SST
BC(3)
Traditional flange bracket, B3, all SST
Special Configuration (Software)
Standard
C1(7)
Customer Software Configuration (“Configuration Data Sheet” Must Be Completed)
C3
Gage Pressure Calibration on Rosemount 3051SAM_ _A4 only
C4(7)
NAMUR Alarm and Saturation Levels, High Alarm
C5(7)
NAMUR Alarm and Saturation Levels, Low Alarm
C6(7)
Custom Alarm and Saturation Levels, High Alarm (Requires C1 and Configuration Data Sheet)
C7(7)
Custom Alarm and Saturation Levels, Low Alarm (Requires C1 and Configuration Data Sheet)
C8(7)
Low alarm (standard Rosemount alarm and saturation levels)
Special Configuration (Hardware)
Standard
1/2-14 NPT Flange Adapters
D2(8)
D4
External ground screw assembly
D5(8)
Delete transmitter drain/vent valves (install plugs)
Expanded
D7(8)
Coplanar flange without drain/vent ports
D9(8)
RC 1/2 Flange Adapters
Product Certifications
Standard
E1
ATEX Flameproof
I1
ATEX Intrinsic Safety
N1
ATEX Type n
K1
ATEX Flameproof and Intrinsically Safe, Type n, Dust
ND
ATEX Dust
E4
TIIS Flameproof
E5
FM Explosion-proof, Dust Ignition-proof
I5
FM Intrinsically Safe, Division 2
K5
FM Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2
E6(9)
CSA Explosion-proof, Dust Ignition-proof, Division 2
I6
CSA Intrinsically Safe
K6(9)
CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2
E7
IECEx Flameproof
I7
IECEx Intrinsic Safety
N7
IECEx Type n
K7
IECEx Flameproof, Intrinsic Safety, Type n
E2
INMETRO Flameproof
I2
INMETRO Intrinsically Safe
K2
INMETRO Flameproof, Intrinsic Safety, Type n
E3
China Flameproof
Standard
★
★
Standard
★
★
★
★
★
★
★
★
★
Standard
★
★
★
★
★
★
★
Standard
★
★
★
Standard
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
7
Product Data Sheet
Rosemount DP Level
00813-0100-4016, Rev LA
January 2011
Table 1. 3051SAM Scalable Advanced Measurement Transmitter for ERS Applications Ordering Information
★ The Standard offering represents the most common models and options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
I3
China Intrinsic Safety
KA(9)
ATEX and CSA Flameproof, Intrinsically Safe, Division 2
KB(9)
FM and CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2
KC
FM and ATEX Explosion-proof, Intrinsically Safe, Division 2
KD(9)
FM, CSA, and ATEX Explosion-proof, Intrinsically Safe
Special Certifications
Standard
Q4
Calibration certificate
QP
Calibration Certificate and Tamper Evident Seal
Q8
Material Traceability Certification per EN 10204 3.1B
Q16
Surface Finish Certification for Hygienic Remote Seals
QZ(10)
Remote Seal System Performance Calculation Report
Terminal Blocks
Standard
T1(7)
Transient Terminal Block
Alternate Materials of Construction
Standard
L1(11)
Inert Sensor Fill Fluid
L2
Graphite-Filled PTFE O-Ring
L4(8)
Austenitic 316 SST Bolts
L5(2)(8)
ASTM A 193, Grade B7M Bolts
L6(8)
Alloy K-500 Bolts
L7(2)(8)
ASTM A 453, Class D, Grade 660 Bolts
L8(8)
ASTM A 193, Class 2, Grade B8M Bolts
Display Type (ERS Primary Only)
Standard
M5(7)
PlantWeb LCD Display
M7(7)
Remote Mount LCD Display and Interface, PlantWeb Housing, No Cable, SST Bracket
M8(7)
Remote Mount LCD Display and Interface, PlantWeb Housing, 50 ft. (15.2 m) Cable, SST Bracket
M9(7)
Remote Mount LCD Display and Interface, PlantWeb Housing, 100 ft. (30.5 m) Cable, SST Bracket
Special Procedures
Expanded
P1
Hydrostatic Testing with Certificate
P2(8)
Cleaning for Special Services
P3(8)
Cleaning for Less than 1 PPM Chlorine/Fluorine
Typical Model Number: 3051SAM 1 S T 2A 2 E11 A 2A
★
★
★
★
★
Standard
★
★
★
★
★
Standard
★
Standard
★
★
★
★
★
★
★
Standard
★
★
★
★
(1) The pressure range should be specified based on the maximum static pressure, not differential pressure.
(2) Materials of Construction comply with metallurgical requirements highlighted within NACE MR0175/ISO 15156 for sour oil field production environments.
Environmental limits apply to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR0103 for sour refining
environments.
(3) Not available with Pressure Sensor / Module codes T or E.
(4) Tantalum diaphragm material is only available with Pressure Sensor / Module code G.
(5) “Assemble to” items are specified separately and require a completed model number.
(6) Consult an Emerson Process Management representative for performance specifications.
(7) Not available with Configuration Type code S.
(8) Not available with Process Connection code A11.
(9) Not available with M20 or G ½ conduit entry size.
(10) The QZ report quantifies the performance of the entire ERS system. One report is provided per ERS system. The QZ option is specified on the Primary
Transmitter (Configuration Type code P).
(11) Silicone fill fluid is standard.
8
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Rosemount 3051SAL Level Transmitter for ERS Applications
•
Integrated transmitter and remote seal in a single model number
•
Variety of process connections including flanged, threaded, and hygienic remote seals
•
Available with 10-year stability and limited 12-year warranty
A 3051SAL Transmitter consists of 3 parts. First, specify the transmitter model codes found on page 9. Then,
specify a remote seal found on page 18. Finish the model number by specifying all desired options on page 11.
ERS Transmitter Model Codes___page 9
Remote Seal Model Codes_______page 18
ERS Options______page 11
Table 2. 3051SAL Scalable Advanced Level Transmitter for ERS Applications Ordering Information
★ The Standard offering represents the most common models and options. These options should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Model
Transmitter Type
3051SAL
Scalable Advanced Level Transmitter
Performance Class
Standard
1
Ultra: 0.025% span accuracy, 200:1 rangedown, 10-year stability, 12-year limited warranty
2
Classic: 0.055% span accuracy, 100:1 rangedown, 5-year stability
Configuration Type
Standard
P
Electronic Remote Sensor - Primary
S
Electronic Remote Sensor - Secondary
Pressure Module Type
Pressure Sensor Type
Standard
G
Coplanar
Gage
T
In-Line
Gage
E
In-Line
Absolute
Expanded
A
Coplanar
Absolute
Pressure Range(5)
Coplanar Gage
In-Line Gage
In-Line Absolute
Coplanar
Absolute
Standard
1A
N/A
-14.7 to 30 psig
0 to 30 psia
0 to 30 psia
(-1,0 to 2,06 bar)
(0 to 2,06 bar)
(0 to 2,06 bar)
2A
-250 to 250 inH2O
-14.7 to 150 psig
0 to 150 psia
0 to 150 psia
(-623 to 623 mbar)
(-1,0 to 10,34 bar)
(0 to 10,34 bar)
(0 to 10,34 bar)
3A
-393 to 1000 inH2O
-14.7 to 800 psig
0 to 800 psia
0 to 800 psia
(-0,98 to 2,49 bar)
(-1,0 to 55,2 bar)
(0 to 55,2 bar)
(0 to 55,2 bar)
4A
-14.2 to 300 psig
-14.7 to 4000 psig
0 to 4000 psia
0 to 4000 psia
(-0,98 to 20,7 bar)
(-1,0 to 275,8 bar)
(0 to 275,8 bar)
(0 to 275,8 bar)
5A
-14.2 to 2000 psig
-14.7 to 10000 psig
0 to 10000 psia
N/A
(-0,98 to 137,9 bar)
(-1,0 to 689,5 bar)
(0 to 689 bar)
Transmitter Output
Standard
A
4-20 mA with Digital Signal Based on HART Protocol
Housing Style
Material
Standard
Housings for ERS Primary - Configuration Type code P
1A
PlantWeb Housing
Aluminum
1B
PlantWeb Housing
Aluminum
1J
PlantWeb Housing
SST
Standard
★
★
Standard
★
★
Standard
★
★
★
Standard
★
★
★
★
★
Standard
★
Conduit Entry
Size
Standard
1
/2–14 NPT
M20 x 1.5 (CM 20)
1/2–14 NPT
★
★
★
9
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Table 2. 3051SAL Scalable Advanced Level Transmitter for ERS Applications Ordering Information
★ The Standard offering represents the most common models and options. These options should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
1K
2E
PlantWeb Housing
SST
Junction Box with Remote Display
Aluminum
Output
2F
Junction Box with Remote Display
Aluminum
Output
2M
Junction Box with Remote Display
SST
Output
Housings for ERS Secondary - Configuration Type code S
2A
Junction Box
Aluminum
2B
Junction Box
Aluminum
2J
Junction Box
SST
Expanded
Housings for ERS Primary - Configuration Type code P
1C
PlantWeb Housing
Aluminum
1L
PlantWeb Housing
SST
2G
Junction Box with Remote Display
Aluminum
Output
Housings for ERS Secondary - Configuration Type code S
2C
Junction Box
Aluminum
Seal System Type
Standard
1
Direct-Mount Seal System
Direct-Mount Extension (Between Transmitter Flange and Seal)
Standard
0
No Extension
2
2-in. (50 mm) Extension
4
4-in. (100 mm) Extension
5
4-in. (100 mm) Thermal Optimizer Extension
Transmitter Reference Pressure Connection
Standard
00
None (In-Line Style Sensor)
20
316L SST Isolator / SST Transmitter Flange
30
Alloy C-276 Isolator / SST Transmitter Flange
Seal Fill Fluid
Specific
Gravity
No Extension
at 77 °F
(25 °C)
Standard
A
Syltherm XLT
0.85
-102 to 293 °F
(-75 to 145 °C)
C
Silicone 704
1.07
32 to 401 °F(2)
(0 to 205 °C)
D
Silicone 200
0.93
-49 to 401 °F
(-45 to 205 °C)
H
Inert (Halocarbon)
1.85
-49 to 320 °F
(-45 to 160 °C)
G(3)(4)
Glycerin and Water
1.13
5 to 203 °F
(-15 to 95 °C)
N(3)
Neobee M-20
0.92
5 to 401 °F(2)
(-15 to 205 °C)
P(3)(4)
Propylene Glycol and Water 1.02
5 to 203 °F
(-15 to 95 °C)
10
M20 x 1.5 (CM 20)
1
/2–14 NPT
★
★
M20 x 1.5 (CM 20)
★
1
★
1/2–14
★
★
★
/2–14 NPT
NPT
M20 x 1.5 (CM 20)
1
/2–14 NPT
G1/2
G1/2
G1/2
G1/2
Standard
★
Standard
★
★
★
★
Standard
★
★
★
Temperature Limits(1)
2-in. (50 mm)
4-in. (100 mm)
Extension
Extension
Thermal
Optimizer
-102 to 293 °F
(-75 to 145 °C)
32 to 464 °F(2)
(0 to 240 °C)
-49 to 401 °F
(-45 to 205 °C)
-49 to 320 °F
(-45 to 160 °C)
5 to 203 °F
(-15 to 95 °C)
5 to 437 °F
(-15 to 225 °C)
5 to 203 °F
(-15 to 95 °C)
-102 to 293 °F
(-75 to 145 °C)
32 to 599 °F
(0 to 315 °C)
-49 to 401 °F
(-45 to 205 °C)
-49 to 320 °F
(-45 to 160 °C)
5 to 203 °F
(-15 to 95 °C)
5 to 437 °F
(-15 to 225 °C)
5 to 203 °F
(-15 to 95 °C)
-102 to 293 °F
(-75 to 145 °C)
32 to 500 °F(2)
(0 to 260 °C)
-49 to 401 °F
(-45 to 205 °C)
-49 to 320 °F
(-45 to 160 °C)
5 to 203 °F
(-15 to 95 °C)
5 to 437 °F
(-15 to 225 °C)
5 to 203 °F
(-15 to 95 °C)
Standard
★
★
★
★
★
★
★
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Continue specifying a completed model number by choosing a remote seal type below:
page 18
FF Flush Flanged Seal
Process Connections:
2 in. / DN 50 / 50A
3 in. / DN 80 / 80A
4 in. / DN 100 / 100A
page 20
EF Extended Flanged Seal
Process Connections:
3 in. / DN 80 / 80A
4 in. / DN 100 / 100A
page 21
RF Remote Flanged Seal
Process Connections:
1 in. / DN 25 / 25A
1.5 in. / DN 40 / 40A
page 22
RT Remote Threaded Seal
page 24
SC Hygienic Tri-Clamp Seal
Process Connections:
¼ - 18 NPT
½ - 14 NPT
¾ - 14 NPT
1 – 11.5 NPT
Process Connections:
1.5 in.
2 in.
3 in.
page 25
SS Hygienic Tank Spud Seal
Process Connections:
4 in.
Options (Include with selected model number)(1)(2) (3) (4)
Electronic Remote Sensor Connection Cable
Standard(5)
R05
50 ft. (15.2 m) Spool of Electronic Remote Sensor Cable
R10
100 ft. (30.5 m) Spool of Electronic Remote Sensor Cable
Special Configuration (Software)
Standard
C1(6)
Customer Software Configuration (“Configuration Data Sheet” Must Be Completed)
C3
Gage Pressure Calibration on Rosemount 3051SAL_ _A4 only
C4(6)
NAMUR Alarm and Saturation Levels, High Alarm
C5(6)
NAMUR Alarm and Saturation Levels, Low Alarm
C6(6)
Custom Alarm and Saturation Levels, High Alarm (Requires C1 and Configuration Data Sheet)
C7(6)
Custom Alarm and Saturation Levels, Low Alarm (Requires C1 and Configuration Data Sheet)
C8(6)
Low Alarm (Standard Rosemount Alarm and Saturation Levels)
Special Configuration (Hardware)
Standard
D4
External Ground Screw Assembly
Product Certifications
Standard
E1
ATEX Flameproof
I1
ATEX Intrinsic Safety
N1
ATEX Type n
K1
ATEX Flameproof and Intrinsically Safe, Type n, Dust
ND
ATEX Dust
E4
TIIS Flameproof
E5
FM Explosion-proof, Dust Ignition-proof
I5
FM Intrinsically Safe, Division 2
K5
FM Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2
E6(7)
CSA Explosion-proof, Dust Ignition-proof, Division 2
I6
CSA Intrinsically Safe
K6(7)
CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2
Standard
★
★
Standard
★
★
★
★
★
★
★
Standard
★
Standard
★
★
★
★
★
★
★
★
★
★
★
★
11
Product Data Sheet
Rosemount DP Level
00813-0100-4016, Rev LA
January 2011
E7
IECEx Flameproof
I7
IECEx Intrinsic Safety
N7
IECEx Type n
K7
IECEx Flameproof, Intrinsic Safety, Type n
E2
INMETRO Flameproof
I2
INMETRO Intrinsically Safe
K2
INMETRO Flameproof, Intrinsic Safety, Type n
KA(7)
ATEX and CSA Flameproof, Intrinsically Safe, Division 2
KB(7)
FM and CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2
KC
FM and ATEX Explosion-proof, Intrinsically Safe, Division 2
KD(7)
FM, CSA, and ATEX Explosion-proof, Intrinsically Safe
Alternate Materials of Construction
Standard
L1(8)
Inert Sensor Fill Fluid
L2
Graphite-Filled PTFE O-Ring
L4
Austenitic 316 SST Bolts
L5(9)
ASTM A 193, Grade B7M Bolts
L6
Alloy K-500 Bolts
L7(9)
ASTM A 453, Class D, Grade 660 Bolts
L8
ASTM A 193, Class 2, Grade B8M Bolts
Display Type (ERS Primary Only)
Standard
M5(6)
PlantWeb LCD Display
M7(6)
Remote Mount LCD Display and Interface, PlantWeb Housing, No Cable, SST Bracket
M8(6)
Remote Mount LCD Display and Interface, PlantWeb Housing, 50 ft. (15.2 m) Cable, SST Bracket
M9(6)
Remote Mount LCD Display and Interface, PlantWeb Housing, 100 ft. (30.5 m) Cable, SST Bracket
Special Procedures
Expanded
P1
Hydrostatic Testing with Certificate
P2
Cleaning for Special Services
P3
Cleaning for Less than 1 PPM Chlorine/Fluorine
Special Certifications
Standard
Q4
Calibration Certificate
QP
Calibration certificate with tamper evident seal
Q8
Material traceability certification per EN 10204 3.1
QZ(10)
Remote Seal System Performance Calculation Report
Transient Protection
Standard
T1(6)
Transient Terminal Block
Typical Model Number: 3051SAL 1 P G 4A A 1A 1 0 20 D FF 7 1 DA 0 0 M5
★
★
★
★
★
★
★
★
★
★
★
Standard
★
★
★
★
★
★
★
Standard
★
★
★
★
Standard
★
★
★
★
Standard
★
(1) Temperature limits are reduced in vacuum service and may be limited by seal selection.
(2) Maximum process temperature is limited by heat transfer to the transmitter electronics and must be further derated if ambient, temperature exceeds 70 °F
(21 °C).
(3) This is a food grade fill fluid.
(4) Not suitable for vacuum applications.
(5) The pressure range should be specified based on the maximum static pressure, not differential pressure.
(6) Not available with Configuration Type code S.
(7) Not available with M20 or G ½ conduit entry size.
(8) Silicone fill fluid is standard.
(9) Materials of construction comply with metallurgical requirements highlighted within NACE MR0175 / ISO 15156 for sour oil field production environments.
Environmental limits apply to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR0103 for sour refining
environments.
(10) The QZ report quantifies the performance of the entire ERS system. One report is provided per ERS system. The QZ option is specified on the Primary
Transmitter (Configuration Type code P).
12
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Rosemount 3051S Liquid Level Transmitter
3051SAL In-Line with
“FF” Flanged Seal
Rosemount 3051S liquid level transmitters combine the scalable features
and benefits of a high-performance 3051S transmitter with the durability and
reliability of a remote diaphragm seal all in a single model number.
Level transmitters can also be ordered with an additional 1199 remote seal
to form a Tuned-System Assembly that offers improved performance and
reduced costs compared to traditional symmetrical (balanced) assemblies.
3051SAL Coplanar
with “SS” Hygienic
Tank Spud Seal
Product features and capabilities include:
• Variety of process connections including flanged, threaded, and hygienic
seals
• Quantified performance for the entire transmitter / seal assembly (QZ
option)
Tuned-System
Assembly Comprised
of 3051SAL with
1199 Flanged Seal
• HART, FOUNDATION fieldbus, and Wireless protocols
Additional Information
Specifications: page 91
Dimensional Drawings: page 104
Rosemount 3051SAL Liquid Level Transmitter
A 3051SAL Transmitter consists of 3 parts. First, specify the transmitter model codes found on page 13. Then,
specify a remote seal found on page 18. Finish the model number by specifying all desired options on page 15.
Transmitter Model Codes_........._ page 13
Remote Seal Model Codes_........._page 18
Transmitter Options page 15
Table 3. Rosemount 3051S Liquid Level Ordering Information
★ The Standard offering represents the most common models and options. These options should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Model
Transmitter Type
3051SAL
Scalable Advanced Level Transmitter for Liquid Level Applications
Performance Class
Standard
1
2
Ultra: 0.025% Span Accuracy, 200:1 Rangedown, 10-Year Stability, Limited 12-Year Warranty
Classic: 0.055% Span Accuracy, 100:1 Rangedown, 5-Year Stability
Standard
★
★
Configuration Type
Standard
C
Pressure Module Type
Standard
D
G
T
E
Expanded
A
Standard
★
Liquid Level Transmitter
Pressure Sensor Type
Coplanar
Coplanar
In-Line
In-Line
Differential
Gage
Gage
Absolute
Coplanar
Absolute
Standard
★
★
★
★
Pressure Range
13
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Table 3. Rosemount 3051S Liquid Level Ordering Information
★ The Standard offering represents the most common models and options. These options should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Standard
1A
2A
3A
4A
5A
Coplanar DP
Coplanar Gage
In-Line Gage
In-Line
Absolute
Coplanar Absolute
N/A
N/A
-250 to 250 inH2O
(-623 to 623 mbar)
-1000 to 1000 inH2O
(-2,5 to 2,5 bar)
-300 to 300 psi
(-20,7 to 20,7 bar)
-2000 to 2000 psi
(-137,9 to 137,9 bar)
-250 to 250 inH2O
(-623 to 623 mbar)
-393 to 1000 inH2O
(-0,98 to 2,5 bar)
-14.2 to 300 psig
(-0,98 to 20,7 bar)
-14.2 to 2000 psig
(-0,98 to 137,9 bar)
-14.7 to 30 psig
(-1,0 to 2,06 bar)
-14.7 to 150 psig
(-1,0 to 10,3 bar)
-14.7 to 800 psig
(-1,0 to 55,2 bar)
-14.7 to 4000 psig
(-1,0 to 275,8 bar)
-14.7 to 10000 psig
(-1,0 to 689 bar)
0 to 30 psia
(0 to 2,06 bar)
0 to 150 psia
(0 to 10,34 bar)
0 to 800 psia
(0 to 55,2 bar)
0 to 4000 psia
(0 to 275,8 bar)
0 to 10000 psia
(0 to 689 bar)
0 to 30 psia
(0 to 2,06 bar)
0 to 150 psia
(0 to 10,34 bar)
0 to 800 psia
(0 to 55,2 bar)
0 to 4000 psia
(0 to 275,8 bar)
N/A
Standard
★
★
★
★
★
Transmitter Output(2)
Standard
A
F(10)
X(11)
Standard
★
★
★
4-20 mA with digital signal based on HART protocol
FOUNDATION fieldbus protocol
Wireless (Requires wireless options and wireless PlantWeb housing)
Housing Style
Material(17)
Standard
1A
1B
1J
1K
2A
2B
2E
2F
2J
5A(5)
5J(5)
7J(12)
PlantWeb housing
PlantWeb housing
PlantWeb housing
PlantWeb housing
Junction Box housing
Junction Box housing
Junction Box with output for remote interface
Junction Box with output for remote interface
Junction Box housing
Wireless PlantWeb housing
Wireless PlantWeb housing
Quick Connect (A size Mini, 4-pin male
termination)
Aluminum
Aluminum
SST
SST
Aluminum
Aluminum
Aluminum
Aluminum
SST
Aluminum
SST
SST
1/2–14
PlantWeb housing
PlantWeb housing
Junction Box housing
Junction Box with output for remote interface
Aluminum
316L SST
Aluminum
Aluminum
G1/2
G1/2
G1/2
G1/2
Expanded
1C
1L
2C
2G
Conduit Entry
Standard
★
★
★
★
★
★
★
★
★
★
★
★
NPT
M20 x 1.5
1/2–14 NPT
M20 x 1.5
1
/2–14 NPT
M20 x 1.5
1/2–14 NPT
M20 x 1.5
1/2–14 NPT
1/2–14 NPT
1
/2–14 NPT
Direct-Mount Extension (Between Transmitter Flange and Seal)
Standard
10
12
14
15
Standard
★
★
★
★
No Extension
2-in. (50 mm) Extension
4-in. (100 mm) Extension
4-in. (100 mm) Thermal Optimizer Extension
Transmitter Reference Pressure Connection
Standard
00
None (Inline Module Type Only)
10(13)
Tuned-System Assembly, One Capillary Remote Seal (Requires separate 1199 model number)
20
316 L SST Isolator with SST Transmitter Flange
30
Alloy C-276 Isolator with SST Transmitter Flange
(1)
Seal Fill Fluid
Specific Gravity at Temperature Limits
77 °F (25 °C)
No Extension
2-in. (50 mm)
4-in. (100 mm)
Extension
Extension
Standard
14
Standard
★
★
★
★
Thermal
Optimizer
Standard
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Table 3. Rosemount 3051S Liquid Level Ordering Information
★ The Standard offering represents the most common models and options. These options should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
A
Syltherm XLT
0.85
C
Silicone 704
1.07
D
Silicone 200
0.93
H
Inert (Halocarbon)
1.85
G(3)(4)
Glycerine and Water
1.13
N(3)
Neobee M-20
0.92
P(3)(4)
Propylene Glycol
and Water
1.02
-102 to 293 °F
(-75 to 145 °C)
32 to 401 °F
(0 to 205 °C)(2)
-49 to 401 °F
(-45 to 205 °C)
-49 to 320 °F
(-45 to 160 °C)
5 to 203 °F
(-15 to 95 °C)
5 to 401 °F
(-15 to 205 °C)(2)
5 to 203 °F
(-15 to 95 °C)
-102 to 293 °F
32 to 464 °F
(0 to 240 °C)(2)
-49 to 401 °F
(-45 to 205 °C)
-49 to 320 °F
(-45 to 160 °C)
5 to 203 °F
(-15 to 95 °C)
5 to 437 °F
(-15 to 225 °C)
5 to 203 °F
(-15 to 95 °C)
102 to 293 °F
(-75 to 145 °C)
32 to 500 °F
(0 to 260 °C)(2)
-49 to 401 °F
(-45 to 205 °C)
-49 to 320 °F
(-45 to 160 °C)
5 to 203 °F
(-15 to 95 °C)
5 to 437 °F
(-15 to 225 °C)
5 to 203 °F
(-15 to 95 °C)
102 to 293 °F
(-75 to 145 °C)
32 to 599 °F
(0 to 315 °C)
-49 to 401 °F
(-45 to 205 °C)
-49 to 320 °F
(-45 to 160 °C)
5 to 203 °F
(-15 to 95 °C)
5 to 437 °F
(-15 to 225 °C)
5 to 203 °F
(-15 to 95 °C)
★
★
★
★
★
★
★
Continue specifying a completed model number by choosing a remote seal type below:
page 18
FF Flush Flanged Seal
Process Connections:
2 in. / DN 50 / 50A
3 in. / DN 80 / 80A
4 in. / DN 100 / 100A
Process Connections:
3 in. / DN 80 / 80A
4 in. / DN 100 / 100A
page 20
EF Extended Flanged Seal
page 21
RF Remote Flanged Seal
Process Connections:
1 in. / DN 25 / 25A
1.5 in. / DN 40 / 40A
page 22
RT Remote Threaded Seal
Process Connections:
¼ - 18 NPT
½ - 14 NPT
¾ - 14 NPT
1 – 11.5 NPT
page 24
SC Hygienic Tri-Clamp Seal
Process Connections:
1.5 in.
2 in.
3 in.
page 25
SS Hygienic Tank Spud Seal
Process Connections:
4 in.
Wireless Options (Requires option code X and wireless PlantWeb housing)(1)(2) (3) (4)
Update Rate
Standard(5)
WA
User Configurable Update Rate
Operating Frequency and Protocol
Standard
3
2.4 GHz DSSS, IEC 62591 (WirelessHART)
Omnidirectional Wireless Antenna
Standard
WK
External Antenna
Standard
★
★
★
15
Product Data Sheet
Rosemount DP Level
00813-0100-4016, Rev LA
January 2011
WM
Extended Range, External Antenna
Expanded
WN
High-Gain, Remote Antenna
SmartPower™
Standard
1(6)
Adapter for Black Power Module (I.S. Power Module Sold Separately)
★
★
Other Options (Include with selected model number)
PlantWeb Control Functionality
Standard
A01(7)(8)
FOUNDATION fieldbus Advanced Control Function Block Suite
PlantWeb Diagnostic Functionality
Standard
D01(7)(8)
FOUNDATION fieldbus Diagnostics Suite
DA2(9)
Advanced HART Diagnostics Suite
Special Configuration (Software)
Standard(10)(11)(12)(13)
C1(14)
Custom software configuration (Requires Configuration Data Sheet)
C3
Gage pressure calibration on Rosemount 3051SAL_ _A4 only
C4(7)(14)
NAMUR alarm and saturation levels, high alarm
C5(7)(14)
NAMUR alarm and saturation levels, low alarm
C6(7)(14)
Custom alarm and saturation signal levels, high alarm (Requires C1 and Configuration Data Sheet)
C7(7)(14)
Custom alarm and saturation signal levels, low alarm (Requires C1 and Configuration Data Sheet)
C8(7)(14)
Low alarm (standard Rosemount alarm and saturation levels)
Special Configuration (Hardware)
Standard
DO(15)
316 SST Conduit Plug
D1(7)(14)(16)
Hardware adjustments (zero, span, alarm, security)
1/2-14 NPT flange adapter
D2
D4
External ground screw assembly
D5
Delete transmitter drain/vent valves (install plugs)
D9
RC 1/2 SST flange adapter
Product Certifications(17)
Standard
E1
ATEX Flameproof
I1
ATEX Intrinsic Safety
IA
ATEX FISCO Intrinsic Safety (FOUNDATION fieldbus protocol only)
N1
ATEX Type n
K1
ATEX Flameproof, Intrinsic Safety, Type n, Dust
ND
ATEX Dust
E4
TIIS Flameproof
E5
FM Explosion-proof, Dust Ignition-proof
I5
FM Intrinsically Safe, Division 2
IE
FM FISCO Intrinsically Safe (FOUNDATION fieldbus protocol only)
K5
FM Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2
E6(18)
CSA Explosion-proof, Dust Ignition-proof, Division 2
I6
CSA Intrinsically Safe
IF
CSA FISCO Intrinsically Safe (FOUNDATION fieldbus protocol only)
K6(18)
CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2
D3(19)
Measurement Canada Accuracy Approval
E7
IECEx Flameproof, Dust Ignition-proof
I7
IECEx Intrinsic Safety
IG
IECEx FISCO Intrinsic Safety (FOUNDATION fieldbus protocol only)
N7
IECEx Type n
K7
IECEx Flameproof, Dust Ignition-proof, Intrinsic Safety, Type n
E2
INMETRO Flameproof
I2
INMETRO Intrinsic Safety
K2
INMETRO Flameproof, Intrinsic Safety
16
Standard
★
Standard
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
E3
China Flameproof
I3
China Intrinsic Safety
KA(18)
ATEX and CSA Flameproof, Intrinsically Safe, Division 2
KB(18)
FM and CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2
KC
FM and ATEX Explosion-proof, Intrinsically Safe, Division 2
KD(18)
FM, CSA, and ATEX Explosion-proof, Intrinsically Safe
Alternate Materials of Construction
Standard
L1(20)
Inert sensor fill fluid
L2
Graphite-filled PTFE o-ring
L4
Austenitic 316 SST bolts
L5(21)
ASTM A193, Grade B7M bolts
L6
Alloy K-500 bolts
L7(21)
ASTM A453, Class D, Grade 660 bolts
L8
ASTM A193, Class 2, Grade B8M bolts
Display Type(22)
Standard
M5
PlantWeb LCD Display
M7(7)
Remote mount LCD display and interface, PlantWeb housing, no cable, SST bracket
M8(7)
Remote mount LCD display and interface, PlantWeb housing, 50 ft. (15 m) cable, SST bracket
M9(7)
Remote mount LCD display and interface, PlantWeb housing, 100 ft. (31 m) cable, SST bracket
Special Procedures
Expanded
P1
Hydrostatic testing with certificate
P2
Cleaning for special services
P3
Cleaning for less than 1PPM chlorine/fluorine
Special Certification
Standard
Q4
Calibration certificate
QP
Calibration certificate and tamper evident seal
Q8
Material traceability certification per EN 10204 3.1.B
QS(7)(14)
Prior-use certificate of FMEDA Data
QT(23)
Safety-certified to IEC 61508 with certificate of FMEDA data
QZ
Remote Seal System Performance Calculation Report
Transient Protection
Standard
T1(24)(25)
Transient terminal block
Conduit Electrical Connector
Standard
GE(26)
M12, 4-pin, Male Connector (eurofast®)
GM(26)
A size Mini, 4-pin, Male Connector (minifast®)
Typical Model Number: 3051SAL 1 C G 2A A 1A 10 20 D FF G 1 DA 0 0
★
★
★
★
★
★
Standard
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
(1) At ambient pressure of 14.7 psia (1 bar-a) and ambient temperature of 70°F (21°C).
(2) Maximum process temperature is limited by heat transfer to the transmitter and must be further derated if ambient, temperature exceeds 70 °F (21 °C).
(3) This is a food grade fill fluid.
(4) Not suitable for vacuum applications.
(5) Only available with output code X.
(6) Long-Life Power Module must be shipped separately, order Part #00753-9220-0001.
(7) Not available with output code X.
(8) Not available with output code A.
(9) Requires PlantWeb housing and Output code A. Includes Hardware Adjustments as standard.
(10) Requires PlantWeb housing.
(11) Available approvals are FM Intrinsically Safe, Division 2 (option code I5), CSA Intrinsically Safe (option code I6), ATEX Intrinsic Safety (option code I1),
and IECEx Intrinsic Safety (option code I7).
17
Product Data Sheet
Rosemount DP Level
00813-0100-4016, Rev LA
January 2011
(12) Available with output code A only. Available approvals are FM Intrinsically Safe, Division 2 (option code I5), ATEX Intrinsic Safety (option code I1), or IECEx
Intrinsic Safety (option code I7). Contact an Emerson Process Management representative for additional information.
(13) With option code 10, user must select Seal Location option code M in Table 7 of Rosemount DP Level PDS.
(14) Not available with output code F.
(15) Transmitter is shipped with 316 SST conduit plug (uninstalled) in place of carbon steel conduit plug.
(16) Not available with housing style codes 2E, 2F, 2G, 2M, 5A, 5J, or 7J.
(17) Valid when SuperModule Platform and housing have equivalent approvals.
(18) Not available with M20 or G ½ conduit entry size.
(19) Requires PlantWeb housing and Hardware Adjustments option code D1. Limited availability depending on transmitter type and range. Contact an Emerson
Process Management representative for additional information.
(20) Silicone fill fluid is standard.
(21) Materials of construction comply with metallurgical requirements highlighted within NACE MR0175 / ISO 15156 for sour oil field production environments.
Environmental limits apply to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR0103 for sour refining
environments.
(22) Not available with Housing code 01 or 7J.
(23) Not available with output code F or X. Not available with housing code 01 or 7J.
(24) Not available with Housing code 00, 01, 5A, or 7J.
(25) The T1 option is not needed with FISCO Product Certifications; transient protection is included in the FISCO product certification codes IA, IE, IF, and IG.
(26) Not available with Housing code 00, 01, 5A, or 7J. Available with Intrinsically Safe approvals only. For FM Intrinsically Safe, Division 2 (option code I5) or
FM FISCO Intrinsically Safe (option code IE), install in accordance with Rosemount drawing 03151-1009 to maintain outdoor rating (NEMA 4X and IP66).
Direct Mount Seals for 3051SAL
Flush Flanged (FF) Seal
•
Most common seal
•
Good for use in general applications
•
Easy installation on flanged connections ranging from 2-in. (DN 50) to 4-in. (DN 100)
Table 4. Flush Flanged (FF) Seal Ordering Information
★ The Standard offering represents the most common models and options. These options should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Model
Process Connection
FF
Flush Flanged Seal
Process Connection Size
Standard
G
2-in. / DN 50 / 50A
7
3-in. / 80A
J
DN 80
9
4-in. / DN 100 / 100A
Flange / Pressure Rating
Standard
1
Class 150 per ANSI/ASME B16.5
2
Class 300 per ANSI/ASME B16.5
4
Class 600 per ANSI/ASME B16.5
G
PN 40 per EN 1092-1
Expanded
A
10K per JIS B2238
B
20K per JIS B2238
D
40K per JIS B2238
18
Standard
★
★
★
★
Standard
★
★
★
★
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Table 4. Flush Flanged (FF) Seal Ordering Information
★ The Standard offering represents the most common models and options. These options should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
E
PN 10/16 per EN 1092-1 (DN 100 only)
Materials of Construction
Isolating Diaphragm
Upper Housing
Standard
CA
316L SST
316L SST
DA
316L SST
316L SST
CB(1)
Alloy C-276
316L SST
DB(1)
Alloy C-276
316L SST
CC
Tantalum
316L SST
DC
Tantalum
316L SST
Flushing Connection Ring (Lower Housing)(2)
Standard
0
None
A
316 SST
B
Alloy C-276
Flushing Connection Quantity & Size
Standard
0
None
1
One 1/4-18 NPT Flushing Connection
3
Two 1/4-18 NPT Flushing Connections
7
One 1/2-14 NPT Flushing Connection
9
Two 1/2-14 NPT Flushing Connections
Flange
CS
316 SST
CS
316 SST
CS
316 SST
Standard
★
★
★
★
★
★
Standard
★
★
★
Standard
★
★
★
★
★
Options (Include with selected model number)
Flushing Connection Ring Plugs
Standard
SD
Alloy C-276 Plug(s) for Flushing Connection(s)
SG
SST Plug(s) for Flushing Connection(s)
SH
SST Drain / Vent(s) for Flushing Connection(s)
Flushing Connection Ring Gaskets
Expanded
SK
Barium Sulfate-Filled PTFE Gasket
SN
Grafoil Gasket
Additional Options
Expanded
SB
Extra Fill Fluid for Cold Temperature Applications
SJ
PTFE Gasket
SC(3)
0.006-in. (150 μm) Diaphragm Thickness
ST(4)
Wetted Materials Compliance to NACE MR 0175 / ISO 1516, MR 0103
SU(3)
0.001-in. (25 μm) Gold Plated Diaphragm
SV(5)
PTFE Coated Diaphragm for Non-Stick Purposes
Standard
★
★
★
Complete the 3051SAL model number by specifying options as needed:
page 11
page 15
ERS Transmitter Options
Liquid Level Transmitter Options
(1) Not available with option code SC.
(2) Supplied with Thermo Tork TN9000 gasket.
(3) Not available with Tantalum diaphragms (Material of Construction codes CC and DC).
(4) Materials of construction comply with metallurgical requirements highlighted within NACE MR0175 / ISO 15156 for sour oil field production environments.
Environmental limits apply to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR0103 for sour refining
environments.
(5) Not available with transmitter option code Q8 (Material Traceability per EN 10204 3.1)
19
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Extended Flanged (EF) Seal
•
Good for use in viscous applications with plugging issues
•
Seal diaphragm installed flush with inner tank wall to prevent process plugging
•
Easy installation on 3-in. (DN 80) and 4-in. (DN 100) flanged connections
Table 5. Extended Flanged (EF) Seal Ordering Information
★ The Standard offering represents the most common models and options. These options should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Model
Process Connection
EF
Extended Flanged Seal
Process Connection Size
Standard
7
3-in. / DN 80 / 80A
9
4-in. / DN 100 / 100A
Flange / Pressure Rating
Standard
1
Class 150 per ANSI/ASME B16.5
2
Class 300 per ANSI/ASME B16.5
4
Class 600 per ANSI/ASME B16.5
G
PN 40 per EN 1092-1
Expanded
A
10K per JIS B2238
B
20K per JIS B2238
D
40K per JIS B2238
E
PN 10/16 per EN 1092-1 (DN 100 only)
Materials of Construction
Isolating Diaphragm
Extension / Gasket Surface
Standard
CA
316L SST
316L SST
DA
316L SST
316L SST
CB
Alloy C-276
Alloy C-276
DB
Alloy C-276
Alloy C-276
Seal Extension Length
Standard
20
2-in. (50 mm)
40
4-in. (100 mm)
60
6-in. (150 mm)
Standard
★
★
Standard
★
★
★
★
Mounting Flange
CS
316 SST
CS
316 SST
Standard
★
★
★
★
Standard
★
★
★
Options (Include with selected model number)
Standard
ST(1)
SB
Expanded
SC
SU
SV(2)
Wetted Materials Compliance per NACE MR 0175 / ISO 1516, MR 0103
Extra Fill Fluid for Cold Temperature Applications
Standard
★
★
0.0016-in. (150 μm) Diaphragm Thickness
0.001-in. (25 μm) Gold Plated Diaphragm
PTFE Coated Diaphragm for Non-Stick Purposes
Complete the 3051SAL model number by specifying options as needed:
page 11
page 15
ERS Transmitter Options
Liquid Level Transmitter Options
(1) Materials of construction comply with metallurgical requirements highlighted within NACE MR0175 / ISO 15156 for sour oil field production environments.
Environmental limits apply to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR0103 for sour refining
environments.
(2) Not available with transmitter option code Q8 (Material Traceability per EN 10204 3.1)
20
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Remote Flanged (RF) Seal
•
Designed to improve performance on smaller process connections
•
Easy installation on flanged connections ranging from 1-in. to 1.5-in. (DN 50 – DN 40)
•
Lower housing / flushing ring required
Table 6. Remote Flanged (RF) Seal Ordering Information
★ The Standard offering represents the most common models and options. These options should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Model
Process Connection
RF
Remote Flanged Seal
Process Connection Size
Standard
2
1-in. / 25A
4
1.5-in. / 40A
D
DN 25
F
DN 40
Flange / Pressure Rating
Standard
1
Class 150 per ANSI/ASME B16.5
2
Class 300 per ANSI/ASME B16.5
4
Class 600 per ANSI/ASME B16.5
G
PN 40 per EN 1092-1
Expanded
A
10K per JIS B2238
B
20K per JIS B2238
D
40K per JIS B2238
Materials of Construction
Isolating Diaphragm
Upper Housing
Standard
CA
316L SST
316L SST
DA
316L SST
316L SST
CB
Alloy C-276
316L SST
DB
Alloy C-276
316L SST
CC
Tantalum
316L SST
DC
Tantalum
316L SST
Flushing Connection Ring Material (Lower Housing)(1)
Standard
A
316L SST
B
Alloy C-276
D
Plated CS
Number of Flushing Connections
Standard
1
One ¼-18 NPT Flushing Connection
3
Two ¼-18 NPT Flushing Connections
5
None
Standard
★
★
★
★
Standard
★
★
★
★
Flange
CS
316 SST
CS
316 SST
CS
316 SST
Standard
★
★
★
★
★
★
Standard
★
★
★
Standard
★
★
★
Options (Include with selected model number)
Flushing Connection Ring Plugs
Standard
SD
Alloy C-276 Plugs
SG
316 SST Plugs
SH
316 SST Drain / Vents
Flushing Connection Ring Gaskets
Standard
SJ
PTFE Gasket
Expanded
SK
Barium Sulfate-Filled PTFE Gasket
SN
Grafoil Gasket
SR
Ethylene Propylene Gasket
Standard
★
★
★
Standard
★
21
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Table 6. Remote Flanged (RF) Seal Ordering Information
★ The Standard offering represents the most common models and options. These options should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Additional Options
Standard
ST(2)
Wetted Materials Compliance per NACE MR 0175 / ISO 1516, MR 0103
SB
Extra Fill Fluid for Cold Temperature Applications
Expanded
SC(3)
0.006-in. (150 μm) Diaphragm Thickness
SU(3)
0.001-in. (25 μm) Gold Plated Diaphragm
SV(4)
PTFE Coated Diaphragm for Non-Stick Purposes
Standard
★
★
Complete the 3051SAL model number by specifying options as needed:
page 11
page 15
ERS Transmitter Options
Liquid Level Transmitter Options
(1) Supplied with C4401 Aramid fiber gasket.
(2) Materials of construction comply with metallurgical requirements highlighted within NACE MR0175 / ISO 15156 for sour oil field production environments.
Environmental limits apply to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR0103 for sour refining
environments.
(3) Not available with Tantalum diaphragms (Material of Construction codes CC and DC).
(4) Not available with transmitter option code Q8 (Material Traceability per EN 10204 3.1)
Remote Threaded (RT) Seal
•
For use with threaded process connections (1/4-18 to 1-11.5 NPT)
•
Rated for use in high-pressure applications (up to 2500 PSI)
•
Optional flushing connections available
Table 7. RT Threaded Seal Ordering Information
★ The Standard offering represents the most common models and options. These options should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Process Connection Style
Standard
RT
Standard
★
Remote Threaded Seal
Process Connection Size
Standard
3
4
5
Expanded
1
Standard
★
★
★
1
/2-14 NPT
3/4-14 NPT
1-11.5 NPT
1/4-18
NPT
Pressure Rating
Standard
0
Standard
★
2500 psi
Isolating Diaphragm Material
Upper Housing Material
Flange
Standard
CA
DA
CB
DB
CC
DC
316L SST
316L SST
316L SST
316L SST
316L SST
316L SST
CS
316 SST
CS
316 SST
CS
316 SST
316L SST
316L SST
Alloy C-276
Alloy C-276
Tantalum
Tantalum
Standard
★
★
★
★
★
★
Flushing Connection Ring Material (Lower Housing)(1) (2)
Standard
22
Standard
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Table 7. RT Threaded Seal Ordering Information
★ The Standard offering represents the most common models and options. These options should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
A
B
Expanded
D
316L SST
Alloy C-276
★
★
Plated CS
Number of Flushing Connections
Standard
1
3
5
One 1/4-in. Flushing Connection
Two 1/4-in. Flushing Connections
No Flushing Connection
Standard
★
★
★
Options (Include with selected model number)
Flushing Connection Ring Plugs
Standard
SD
Alloy C-276 Plugs
SG
316 SST Plugs
SH
316 SST Drain / Vents
Flushing Connection Ring Gaskets
Standard
SJ
PTFE Gasket
SN
Grafoil Gasket
SR
Ethylene Propylene Gasket
Expanded
SK
Barium Sulfate-Filled PTFE Gasket
Bolting
Standard
S3
304 SST Bolts
Expanded
S4
S16 SST Bolts
Additional Options
Standard
ST(3)
Wetted Materials Compliance per NACE MR 0175 / ISO 1516, MR 0103
SB
Extra Fill Fluid for Cold Temperature Applications
Expanded
SC(4)
0.006-in. (150 μm) Diaphragm Thickness
SU(4)
0.001-in. (25 μm) Gold Plated Diaphragm
SV(5)
PTFE Coated Diaphragm for Non-Stick Purposes
Standard
★
★
★
Standard
★
★
★
Standard
★
Standard
★
★
Complete the 3051SAL model number by specifying options as needed:
page 11
page 15
ERS Transmitter Options
Liquid Level Transmitter Options
(1) Supplied with C4401 aramid fiber gasket.
(2) Flushing Connection Ring/ Lower Housing assembly bolts provided as standard are carbon steel.
(3) Materials of construction comply with metallurgical requirements highlighted within NACE MR0175 / ISO 15156 for sour oil field production environments.
Environmental limits apply to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR0103 for sour refining
environments.
(4) Not available with Tantalum diaphragms (Material of Construction codes CC and DC).
(5) Not available with transmitter option code Q8 (Material Traceability per EN 10204 3.1)
23
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Hygienic Tri-Clamp (SC) Seal
•
Good for use in hygienic applications
•
Easy installation on Tri-Clover style Tri-Clamp connections (1.5-in. to 3-in.)
•
Conforms to 3-A standard 74-03
Table 8. SC Hygienic Tri-Clover Style Tri-Clamp Seal Ordering Information
★ The Standard offering represents the most common models and options. These options should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Process Connection
Standard
SC(1)
Standard
★
Tri-Clover Style Tri-Clamp Seal
Process Connection Size
Standard
3(2)
5(2)
7
Standard
★
★
★
1½ in.
2 in.
3 in.
Maximum Working Pressure
Standard
0
Isolating Diaphragm Material
Standard
LA00
Expanded
LB00
Standard
★
1000 PSI
Upper Housing Material
316L SST
316L SST
Alloy C-276
316L SST
Standard
★
Options (Include with selected model number)
Diaphragm Surface Finish and Polishing
Expanded
R6
RD
RG
RH
Electropolishing
10 in. (0.25 m) Ra Diaphragm Surface Finish
15 in. (0.375 m) Ra Diaphragm Surface Finish
20 in. (0.5 m) Ra Diaphragm Surface Finish
Certifications
Standard
Q16
Surface Finish Certification
Complete the 3051SAL model number by specifying options as needed:
page 11
page 15
ERS Transmitter Options
Liquid Level Transmitter Options
(1) Clamp and gasket furnished by user. The maximum working pressure is dependent upon the clamp pressure rating.
(2) Consult factory for calibrated spans lower than 5 psi (345 mbar).
24
Standard
★
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Hygienic Tank Spud (SS) Seal
•
Commonly used in hygienic level applications
•
Seal diaphragm installed flush with inner tank wall
•
Conforms to 3-A standard 74-03
Table 9. SS Hygienic Tank Spud Seal Ordering Information
★ The Standard offering represents the most common models and options. These options should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Process Connection
Standard
SS(1)
Hygienic Tank Spud Seal
Process Connection Size
Standard
★
Standard
A
4-in. Sch. 5 Tri-Clamp
Maximum Working Pressure (Clamp Rating)
Standard
★
Standard
0
600 PSI (41 bar)
Upper Housing
Standard
★
Standard
A
316L SST
Diaphragm and Wetted, Extension Material
Standard
★
Diaphragm and Wetted
Standard
AL
316L SST(2)
Expanded
BB
Alloy C-276
Extension Length
Standard
2
6
Extension
316L SST(2)
Standard
★
316L SST
2 in. (50 mm) Extension
6 in. (150 mm) Extension
Standard
★
★
Options (Include with selected model number)
Diaphragm Surface Finish and Polishing
Expanded
R6
Electropolishing
RH
20 in. (0.5 m) Ra Diaphragm Surface Finish
RG(3)
15 in. (0.375 m) Ra Diaphragm Surface Finish
Additional Options
Standard
Q16
S1
Expanded
SC
Surface Finishing Certification
Tank Spud Included with Shipment
Standard
★
★
0.006-in. (150 m) Diaphragm Thickness
Complete the 3051SAL model number by specifying options as needed:
page 11
page 15
ERS Transmitter Options
Liquid Level Transmitter Options
(1) Clamp and Ethylene Propylene o-ring (conforms to 3-A standard 74 and USP class VI) supplied.
(2) Diaphragm brazed and TIG-welded to extension.
(3) Require Option code R6 (Electropolishing).
25
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Rosemount 3051L Liquid Level Transmitter
Rosemount 3051 liquid level transmitters combine the features and benefits
of a 3051 transmitter with the durability and reliability of a direct mount seal
all in a single model number.
Level transmitters can also be ordered with an additional 1199 remote seal
to form a Tuned-System Assembly that offers improved performance and
reduced costs compared to traditional symmetrical (balanced) assemblies.
Product features and capabilities include:
• Variety of process connections
• Quantified performance for the entire transmitter / seal assembly (QZ
option)
3051L Flange-Mounted
Liquid Level Transmitter
• 4-20 mA HART, FOUNDATION fieldbus, Profibus-PA, and 1-5 Vdc HART
low power protocols
Additional Information
Specifications: page 79
Certifications: page 97
Dimensional Drawings: page 104
Table 10. Rosemount 3051L Liquid Level Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Model
Transmitter Type
3051L
Liquid Level Transmitter
Pressure Range
Standard
2
3
4
Standard
★
★
★
–250 to 250 inH2O (–0,6 to 0,6 bar)
–1000 to 1000 inH2O (–2,5 to 2,5 bar)
–300 to 300 psi (–20,7 to 20,7 bar)
Transmitter Output
Standard
Standard
★
★
★
A
F
W(1)
Expanded
4–20 mA with Digital Signal Based on HART Protocol
FOUNDATION fieldbus Protocol
Profibus – PA Protocol
M(2)
Low-Power 1–5 Vdc with Digital Signal Based on HART Protocol (See Option Code C2 for 0.8–3.2 Vdc Output)
Process Connection Size, Material, Extension Length (High Side)
Standard
Code
(3)
G0
H0(3)
J0
A0(3)
A2(3)
A4(3)
A6(3)
B0(3)
B2(3)
B4(3)
B6(3)
26
Standard
Process Connection Size
Material
Extension Length
★
2-in./DN 50 / 50A
2-in./DN 50 / 50A
2-in./DN 50 / 50A
3-in./DN 80 / 80A
3-in./DN 80 / 80A
3-in./DN 80 / 80A
3-in./DN 80 / 80A
4-in./DN 100 / 100A
4-in./DN 100 / 100A
4-in./DN 100 / 100A
4-in./DN 100 / 100A
316L SST
Alloy C-276
Tantalum
316L SST
316L SST
316L SST
316L SST
316L SST
316L SST
316L SST
316L SST
Flush Mount Only
Flush Mount Only
Flush Mount Only
Flush Mount
2-in./50 mm
4-in./100 mm
6-in./150 mm
Flush Mount
2-in./50 mm
4-in./100 mm
6-in./150 mm
★
★
★
★
★
★
★
★
★
★
★
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Table 10. Rosemount 3051L Liquid Level Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
C0(3)
C2(3)
C4(3)
C6(3)
D0(3)
D2(3)
D4(3)
D6(3)
E0
F0
3-in./DN 80 / 80A
3-in./DN 80 / 80A
3-in./DN 80 / 80A
3-in./DN 80 / 80A
4-in./DN 100 / 100A
4-in./DN 100 / 100A
4-in./DN 100 / 100A
4-in./DN 100 / 100A
3-in./DN 80 / 80A
4-in./DN 100 / 100A
Alloy C-276
Alloy C-276
Alloy C-276
Alloy C-276
Alloy C-276
Alloy C-276
Alloy C-276
Alloy C-276
Tantalum
Tantalum
Flush Mount
2-in./50 mm
4-in./100 mm
6-in./150 mm
Flush Mount
2-in./50 mm
4-in./100 mm
6-in./150 mm
Flush Mount Only
Flush Mount Only
★
★
★
★
★
★
★
★
★
★
Mounting Flange Size, Rating, Material (High Side)
Size
Rating
Material
Standard
Standard
M
A
B
N
C
D
P
E
X(3)
F(3)
G(3)
Y(3)
H(3)
J(3)
Z(3)
L(3)
Q
R
S
V
K(3)
T(3)
U(3)
W(3)
7(3)
Expanded
2-in.
3-in.
4-in.
2-in.
3-in.
4-in.
2-in.
3-in.
2-in.
3-in.
4-in.
2-in.
3-in.
4-in.
2-in.
3-in.
DN 50
DN 80
DN 100
DN 100
DN 50
DN 80
DN 100
DN 100
4 in.
ANSI/ASME B16.5 Class 150
ANSI/ASME B16.5 Class 150
ANSI/ASME B16.5 Class 150
ANSI/ASME B16.5 Class 300
ANSI/ASME B16.5 Class 300
ANSI/ASME B16.5 Class 300
ANSI/ASME B16.5 Class 600
ANSI/ASME B16.5 Class 600
ANSI/ASME B16.5 Class 150
ANSI/ASME B16.5 Class 150
ANSI/ASME B16.5 Class 150
ANSI/ASME B16.5 Class 300
ANSI/ASME B16.5 Class 300
ANSI/ASME B16.5 Class 300
ANSI/ASME B16.5 Class 600
ANSI/ASME B16.5 Class 600
PN 40 per EN 1092-1
PN 40 per EN 1092-1
PN 40 per EN 1092-1
PN 10 / 16 per EN 1092-1
PN 40 per EN 1092-1
PN 40 per EN 1092-1
PN 40 per EN 1092-1
PN 10 / 16 per EN 1092-1
ANSI/ASME B16.5 Class 600
CS
CS
CS
CS
CS
CS
CS
CS
SST
SST
SST
SST
SST
SST
SST
SST
CS
CS
CS
CS
SST
SST
SST
SST
SST
1
2
3
4(3)
5(3)
6(3)
—
—
—
—
—
—
10K per JIS B2238
20K per JIS B2238
40K per JIS B2238
10K per JIS B2238
20K per JIS B2238
40K per JIS B2238
CS
CS
CS
316 SST
316 SST
316 SST
Seal Fill Fluid
Specific Gravity at 77 °F
(25 °C)
Temperature Limits(4)
0.85
1.07
0.93
1.85
1.13
-102 to 293 °F (-75 to 145 °C)
32 to 401 °F (0 to 205 °C)
-49 to 401 °F (-45 to 205 °C)
-49 to 320 °F (-45 to 160 °C)
5 to 203 °F (-15 to 95 °C)
Standard
A
C(5)
D
H
G(6)(7)
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
Standard
Syltherm XLT
Silicone 704
Silicone 200
Inert (Halocarbon)
Glycerine and Water
★
★
★
★
★
27
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Table 10. Rosemount 3051L Liquid Level Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
N(5)(6)
P(6)(7)
Neobee M-20
Propylene Glycol
and Water
0.92
1.02
★
★
5 to 401 °F (-15 to 205 °C)
5 to 203 °F (-15 to 95 °C)
Low Pressure Side
Configuration
Transmitter Flange Diaphragm Material
Sensor Fill Fluid
Gage
Differential
Differential
Differential
Differential
Tuned-System
Assembly with
Remote Seal
SST
SST
SST
SST
SST
SST
Silicone
Silicone
Silicone
Inert (Halocarbon)
Inert (Halocarbon)
Silicone (Requires Option Code
S1)
Standard
11(3)
21
22
2A
2B
31(3)
Standard
316L SST
316L SST
Alloy C-276
316L SST
Alloy C-276
316L SST
★
★
★
★
★
★
O-ring
Standard
Standard
A
Glass-filled PTFE
Housing Material
Standard
★
Conduit Entry Size
Standard
A
B
J
K
Expanded
Aluminum
Aluminum
SST
SST
½–14 NPT
M20 × 1.5
½–14 NPT
M20 × 1.5
D
M
Aluminum
SST
G½
G½
★
★
★
★
Options (Include with selected model number)
PlantWeb Control Functionality
Standard
A01
Standard
FOUNDATION fieldbus Advanced Control Function Block Suite
★
PlantWeb Diagnostic Functionality
Standard
D01
Standard
FOUNDATION fieldbus Diagnostics Suite
★
Seal Assemblies
Standard
S1(8)
Standard
Assembled to One Rosemount 1199 Seal (Requires 1199M)
★
Product Certifications
Standard
E5
I5
K5
I1(9)
N1(9)
E8
E4(9)
E3
I3
C6
K6(9)
KB
28
Standard
FM Explosion-proof, Dust Ignition-proof
FM Intrinsically Safe, Division 2
FM Explosion-proof, Dust Ignition-proof, Intrinsically Safe, and Division 2
ATEX Intrinsic Safety and Dust
ATEX Type n Certification and Dust
ATEX Flameproof and Dust Certification
TIIS Flameproof
China Flameproof
China Intrinsic Safety
CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, and Division 2
CSA and ATEX Explosion-proof, Intrinsically Safe, and Division 2 (combination of C6 and K8)
FM and CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, and Division 2 (combination of K5 and C6)
★
★
★
★
★
★
★
★
★
★
★
★
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Table 10. Rosemount 3051L Liquid Level Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
K7
K8(9)
KD(9)
I7
E7
N7
IA
IE
E2
I2
K2
IECEx Flameproof, Dust Ignition-proof, Intrinsic Safety, and Type n (combination of I7, N7, and E7)
ATEX Flame-proof and Intrinsic Safety Approvals (combination of I1 and E8)
FM, CSA, and ATEX Explosion-proof, Intrinsically Safe (combination of K5, C6, I1, and E8)
IECEx Intrinsic Safety
IECEx Flameproof, Dust Ignition-proof
IECEx Type n Certification
ATEX FISCO Intrinsic Safety
FM FISCO Intrinsically Safe
INMETRO Flameproof
INMETRO Intrinsic Safety
INMETRO Flameproof, Intrinsic Safety
★
★
★
★
★
★
★
★
★
★
★
Bolting Material
Standard
L4
L5
L6
L8
Standard
Austenitic 316 SST Bolts
ASTM A 193, Grade B7M bolts
Alloy K-500 Bolts
ASTM A 193 Class 2, Grade B8M Bolts
★
★
★
★
Display Type
Standard
M4(10)
M5
M6
Standard
LCD Display with Local Operator Interface
LCD Display for Aluminum Housing (Housing Codes A, B, C, and D only)
LCD Display for SST Housing (Housing Codes J, K, L, and M only)
★
★
★
Calibration Certification
Standard
Q4
QP
QG
Standard
Calibration Certificate
Calibration Certificate and tamper evident seal
Calibration Certificate and GOST Verification Certificate
★
★
★
Material Traceability Certification
Standard
Standard
Material Traceability Certification per EN 10204 3.1
Q8
★
Quality Certification for Safety
Standard
QS(11)
Standard
Prior-use certificate of FMEDA data
★
Toolkit Total System Performance Reports
Standard
QZ
Standard
Remote Seal System Performance Calculation Report
★
Conduit Electrical Connector
Standard
GE
GM
Standard
M12, 4-pin, Male Connector (eurofast®)
A size Mini, 4-pin, Male Connector (minifast®)
★
★
Hardware Adjustments
Standard
J1(12)(13)
J3(12)(13)
Standard
Local Zero Adjustment Only
No Local Zero or Span Adjustment
★
★
Transient Protection
Standard
T1(14)
Standard
Transient Protection Terminal Block
★
Software Configuration
Standard
C1
(12)
Standard
Custom Software Configuration (Completed CDS 00806-0100-4001 required with order)
★
29
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Table 10. Rosemount 3051L Liquid Level Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Low Power Output
Standard
C2(12)
Standard
0.8–3.2 Vdc Output with Digital Signal Based on HART Protocol (Available with Output code M only)
★
Alarm Limit
Standard
C4(12)(15)
CN(12)(15)
CR
CS
CT
Standard
★
★
★
★
★
NAMUR alarm and saturation levels, high alarm
NAMUR alarm and saturation levels, low alarm
Custom alarm and saturation signal levels, high alarm
Custom alarm and saturation signal levels, low alarm
Low alarm (standard Rosemount alarm and saturation levels)
Conduit Plug
Standard
D0
Standard
★
316 SST Conduit Plug
Ground Screw
Standard
V5(16)
Standard
★
External Ground Screw Assembly
Lower Housing Flushing Connection Options
Ring Material
Number
Size (NPT)
316 SST
316 SST
Alloy C-276
Alloy C-276
316 SST
316 SST
Alloy C-276
Alloy C-276
1
2
1
2
1
2
1
2
1
Standard
F1
F2
F3
F4
F7
F8
F9
F0
Standard
/4-18 NPT
1/4-18 NPT
1/4-18 NPT
1
/4-18 NPT
1/2-14 NPT
1/2-14 NPT
1
/2-14 NPT
1/2-14 NPT
★
★
★
★
★
★
★
★
Typical Model Number: 3051L 2 A A0 A D 21 A A F1
(1) Option Code M4 - LCD Display with Local Operator Interface required for local addressing and configuration.
(2) Not available with hazardous certification Option Codes I1, N1, E4, K6, and K8.
(3) Materials of Construction comply with metallurgical requirements highlighted within NACE MR0175/ISO 15156 for sour oil field production environments.
Environmental limits apply to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR0103 for sour refining
environments.
(4) Temperature limits are reduced in vacuum service and may be limited by seal selection.
(5) Maximum process temperature is limited by heat transfer to the transmitter and must be further derated if ambient, temperature exceeds 70 °F (21 °C).
(6) This is a food grade fill fluid.
(7) Not suitable for vacuum applications.
(8) “Assemble-to” items are specified separately and require a completed model number.
(9) Not available with low-power Option Code M
(10) Available only with output code W - Profibus PA
(11) Only available with HART 4-20 mA output (output code A).
(12) Not available with fieldbus (output code F) or profibus protocols (output code W).
(13) Local zero and span adjustments are standard unless Option Code J1 or J3 is specified.
(14) The T1 option is not needed with FISCO Product Certifications; transient protection is included in the FISCO product certification codes IA, IE, IF, and IG.
(15) NAMUR-Compliant operation is pre-set at the factory and cannot be changed to standard operation in the field.
(16) The V5 option is not needed with the T1 option; external ground screw assembly is included with the T1 option.
30
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Rosemount 2051L Liquid Level Transmitter
Rosemount 2051 liquid level transmitters combine the features and benefits
of a 2051 transmitter with the durability and reliability of a direct mount seal
all in a single model number.
Level transmitters can also be ordered with an additional 1199 remote seal
to form a Tuned-System Assembly that offers improved performance and
reduced costs compared to traditional symmetrical (balanced) assemblies.
Product features and capabilities include:
Tuned-System Assembly Comprised of
2051L with 1199 Flanged Seal
• Variety of process connections
• Quantified performance for the entire transmitter / seal assembly (QZ
option)
• 4-20 mA HART, FOUNDATION fieldbus, and 1-5 Vdc HART Low-Power
outputs
Additional Information
Specifications: page 79
Certifications: page 101
Dimensional Drawings: page 104
Table 11. Rosemount 2051L Liquid Level Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Model
2051L
Transmitter Type
Liquid Level Transmitter
Pressure Range
Standard
2
3
4
Standard
★
★
★
–250 to 250 inH2O (–0,6 to 0,6 bar)
–1000 to 1000 inH2O (–2,5 to 2,5 bar)
–300 to 300 psi (–20,7 to 20,7 bar)
Transmitter Output
Standard
A
4–20 mA with Digital Signal Based on HART Protocol
F
FOUNDATION fieldbus Protocol
Expanded
M
Low-Power, 1–5 Vdc with Digital Signal Based on HART Protocol
Standard
★
★
Process Connection Size, Diaphragm Material (High Side)
Standard
G(1)
H(1)
J
A(1)
B(1)
C(1)
D(1)
E
F
Process Connection Size
Diaphragm
2 in./DN 50
2 in./DN 50
2 in./DN 50
3 in./DN 80
4 in./DN 100
3 in./DN 80
4 in./DN 100
3 in./DN 80
4 in./DN 100
316L SST
Alloy C-276
Tantalum
316L SST
316L SST
Alloy C-276
Alloy C-276
Tantalum
Tantalum
Standard
★
★
★
★
★
★
★
★
★
Extension Length (High Side)
Standard
0
2
4
6
None, Flush Mount
2 in./50 mm
4 in./100 mm
6 in./150 mm
Standard
★
★
★
★
31
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Table 11. Rosemount 2051L Liquid Level Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Mounting Flange Size, Rating, Material (High Side)
Standard
M
A
B
N
C
D
X(1)
F(1)
G(1)
Y(1)
H(1)
J(1)
Q
R
K(1)
T(1)
Size
Rating
Material
2-in.
3-in.
4-in.
2-in.
3-in.
4-in.
2-in.
3-in.
4-in.
2-in.
3-in.
4-in.
DN50
DN80
DN50
DN80
ANSI/ASME B16.5 Class 150
ANSI/ASME B16.5 Class 150
ANSI/ASME B16.5 Class 150
ANSI/ASME B16.5 Class 300
ANSI/ASME B16.5 Class 300
ANSI/ASME B16.5 Class 300
ANSI/ASME B16.5 Class 150
ANSI/ASME B16.5 Class 150
ANSI/ASME B16.5 Class 150
ANSI/ASME B16.5 Class 300
ANSI/ASME B16.5 Class 300
ANSI/ASME B16.5 Class 300
PN 40 per EN 1092-1
PN 40 per EN 1092-1
PN 40 per EN 1092-1
PN 40 per EN 1092-1
CS
CS
CS
CS
CS
CS
SST
SST
SST
SST
SST
SST
CS
CS
SST
SST
Standard
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
Seal Fill Fluid
Specific Gravity at 77 °F
(25 °C)
Temperature Limits(2)
Standard
A
C(3)
D
H
G(4)(5)
N(3)
P(4)(5)
0.85
1.07
0.93
1.85
1.13
0.92
1.02
-102 to 293 °F (-75 to 145 °C)
32 to 401 °F (0 to 205 °C)
-49 to 401 °F (-45 to 205 °C)
-49 to 320 °F (-45 to 160 °C)
5 to 203 °F (-15 to 95 °C)
5 to 401 °F (-15 to 205 °C)
5 to 203 °F (-15 to 95 °C)
Syltherm XLT
Silicone 704
Silicone 200
Inert (Halocarbon)
Glycerin and Water
Neobee M-20
Propylene Glycol and Water
Standard
★
★
★
★
★
★
★
Sensor Module Configuration, Flange Adapter (Low Side)
Standard
1(1)
2
3(1)
Configuration
Transmitter Flange
Gage
Differential
Tuned-System Assembly with
Remote Seal
SST
SST
SST
Standard
★
★
★
Sensor Module Diaphragm Material, Sensor Fill Fluid (Low Side)
Standard
1(1)
2(1)
7(1)
A(1)
B(1)
G(1)
Diaphragm Material
Sensor Fill Fluid
316L SST
Alloy C-276 (SST Valve Seat)
Alloy C-276 (SST Valve Seat)
316L SST
Alloy C-276 (SST Valve Seat)
Alloy C-276 (SST Valve Seat)
Silicone
Silicone
Silicone
Inert (Halocarbon)
Inert (Halocarbon)
Inert (Halocarbon)
Standard
★
★
★
★
★
★
O-ring
Standard
A
Standard
★
Glass-filled PTFE
Housing Material, Conduit Entry Size
Standard
A
32
Housing Material
Conduit Entry Size
Aluminum
½–14 NPT
Standard
★
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Table 11. Rosemount 2051L Liquid Level Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
B
J
K
Expanded
D
M
Aluminum
SST
SST
M20 × 1.5
½–14 NPT
M20 × 1.5
Aluminum
SST
G½
G½
★
★
★
Options (Include with selected model number)
PlantWeb Control Functionality
Standard
A01
FOUNDATION fieldbus Advanced Control Function Block Suite
Seal Assemblies
Standard
S1(6)
Assemble to One Rosemount 1199 Seal (Requires 1199M)
Product Certifications
Standard
E1(7)
ATEX Flameproof
E2(7)
INMETRO Flameproof
E3(7)
China Flameproof
E5
FM Explosion-proof, Dust Ignition-proof
E6
CSA Explosion-proof, Dust Ignition-proof, Division 2
E7(7)
IECEx Flameproof
I1(7)
ATEX Intrinsic Safety
I2(7)
INMETRO Intrinsically Safe
I3(7)
China Intrinsic Safety
I5
FM Intrinsically Safe, Division 2
I6
CSA Intrinsically Safe
I7(7)
IECEx Intrinsic Safety
IA(8)
ATEX FISCO Intrinsic Safety
IE(8)
FM FISCO Intrinsically Safe
IF(8)
CSA FISCO Intrinsically Safe
IG(8)
IECEx FISCO Intrinsically Safe
K1(7)
ATEX Flameproof, Intrinsic Safety, Type n, Dust
K5
FM Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2
K6
CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2
K7(7)
IECEx Flameproof, Intrinsic Safety, Type n
KA(7)
ATEX and CSA Flameproof, Intrinsically Safe, Division 2
KB
FM and CSA Explosion-proof, Dust Ignition-proof, Intrinsically Safe, Division 2
KC(7)
FM and ATEX Explosion-proof, Intrinsically Safe, Division 2
KD(7)
FM, CSA, and ATEX Explosion-proof, Intrinsically Safe
N1(7)
ATEX Type n
N7(7)
IECEx Type n
ND(7)
ATEX Dust
Digital Display
Standard
M5
LCD display
Hardware Adjustments
Standard
D4(9)
Zero and Span Hardware Adjustments
Flange Adapters
Standard
1
DF(10)
/2-14 NPT Flange Adapters
Standard
★
Standard
★
Standard
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
★
Standard
★
Standard
★
Standard
★
33
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Table 11. Rosemount 2051L Liquid Level Transmitter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Conduit Plug
Standard
DO(11)
316 SST Conduit Plug
Ground Screw
Standard
V5(12)
External Ground Screw Assembly
Transient Protection
Standard
T1(13)
Transient Terminal Block
Software Configuration
Standard
C1(14)
Custom Software Configuration (Requires completed Configuration Data Sheet)
Alarm Limit
Standard
C4(14)(15) NAMUR alarm and saturation levels, high alarm
CN(14)(16) NAMUR alarm and saturation levels, low alarm
Calibration Certification
Standard
Q4
Calibration Certificate
Material Traceability Certification
Standard
Q8
Material Traceability Certification per EN 10204 3.1
Quality Certification for Safety
Standard
QS(14)
Prior-use certificate of FMEDA data
Toolkit Total System Performance Reports
Standard
QZ
Remote Seal System Performance Calculation Report
Standard
★
Standard
★
Standard
★
Standard
★
Standard
★
★
Standard
★
Standard
★
Standard
★
Standard
★
Lower Housing Flushing Connection Ring Material
Number
Size (NPT)
Standard
F1
F2
F3(16)
F4(16)
F7
F8
F9
F0
1
2
1
2
1
2
1
2
1/4-18
316 SST
316 SST
Alloy C-276
Alloy C-276
316 SST
316 SST
Alloy C-276
Alloy C-276
Typical Model Number:
2051L
2
A
A0 X D 21 A
A
B4
NPT
1
/4-18 NPT
1/4-18 NPT
1
/4-18 NPT
1
/2-14 NPT
1/2-14 NPT
1
/2-14 NPT
1
/2-14 NPT
M5
Standard
★
★
★
★
★
★
★
★
F1
(1) Materials of Construction comply with metallurgical requirements highlighted within NACE MR0175/ISO 15156 for sour oil field production environments.
Environmental limits apply to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR0103 for sour refining
environments.
(2) Temperature limits are reduced in vacuum service and may be limited by seal selection.
(3) Maximum process temperature is limited by heat transfer to the transmitter electronics and must be further derated if ambient temperatures exceed 70°F
(21°C).
(4) This is a food grade fill fluid.
(5) Not suitable for vacuum applications.
(6) “Assemble-to” items are specified separately and require a completed model number.
(7) Not available with Low Power output code M.
34
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
(8) Only valid with FOUNDATION fieldbus output code F.
(9) Not valid with FOUNDATION fieldbus output code F.
(10) Not available with Remote Mount Seal Assembly option S1.
(11) Transmitter is shipped with 316 SST conduit plug (uninstalled) in place of standard carbon steel conduit plug,
(12) The V5 option is not needed with the T1 option; external ground screw assembly is included with the T1 option.
(13) The T1 option is not needed with FISCO Product Certifications; transient protection is included in the FISCO product certification codes IA, IE, IF, and IG.
(14) Only available with HART 4-20 mA output (output code A).
(15) NAMUR-Compliant operation is pre-set at the factory and cannot be changed to standard operation in the field.
(16) Not available with Option Codes A0, B0, and G0.
35
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Rosemount 1199 Direct Mount Seal Systems
Rosemount 1199 Direct Mount Seals are used commonly at the bottom of
the vessel. Their advanced design minimizes oil volume improving
performance and eliminates the need for mounting hardware.
Product features and capabilities include:
• Direct Mount gage or absolute seal system can be used for open or
vented to atmosphere tank applications
• Tuned-System Assemblies can be used for DP measurements in closed
or pressurized tank applications
• Variety of process connections
• Quantified performance for the entire transmitter / seal assembly
(QZ option)
Tuned-System Assembly Comprised of
3051_L with 1199 Flanged Seal
Additional Information
Specifications: page 89
Dimensional Drawings: page 104
Rosemount 1199 Direct Mount Seal
The 1199 Direct Mount Seal also requires specification of a Rosemount pressure transmitter. See the appropriate
Product Data Sheet for the desired transmitter and include the option indicated in the table below for the
configuration desired.
Table 12. When ordering Rosemount 1199 Direct and Remote Mount Seals, please make sure to add the correct seal system
ordering code to the transmitter model
Transmitter Model
2 Seals
1 Seal
3051S_C
3051C - Welded-Repairable
3051C - All Welded
2051C
3051T, 2051T, 2088
B12
S2
S8 or S9
S2
—
B11
S1
S7 or S0
S1
S1
A 1199 Direct Mount Seal consists of 2 parts. First, specify the direct mount connection model codes found on page
36. Then, specify a remote seal found on page 38.
Ordering Codes
1199 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Direct Mount Connection page 36
Seal Connection page 38
Table 13. Rosemount 1199 Direct Mount Seal Systems Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Model
Product Description
1199
Seal Systems
Connection Type
Seal System
Standard
3051S and 2051C Coplanar Transmitters (3051S_C and 2051C)
W
Welded-Repairable
One or Two Seal System
R(1)
All Welded
One Seal System
T(1)
All Welded
Two Seal System
36
Seal Location
Standard
High Side of Transmitter
High Side of Transmitter
High Side of Transmitter
★
★
★
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Table 13. Rosemount 1199 Direct Mount Seal Systems Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
All In-Line Transmitters (3051S_T, 3051T, 2051T, 2088)
W
All Welded
One or Two Seal System
High Side of Transmitter
3051C Coplanar Transmitters (3051C)
W
Determined by
One or Two Seal System
High Side of Transmitter
Transmitter Code
Seal Fill Fluid
Specific
Temperature Limits(2)
Gravity
No Extension 2-in. (50 mm)
4-in. (100 mm)
Thermal Optimizer
at 77 °F
Extension
Extension
(25 °C)
Standard
A
Syltherm XLT 0.85
-102 to 293 °F -102 to 293 °F
102 to 293 °F
102 to 293 °F
(-75 to 145 °C)
(-75 to 145 °C)
(-75 to 145 °C)
C
Silicone 704
1.07
32 to 401 °F
32 to 464 °F
32 to 500 °F
32 to 599 °F
(0 to 205 °C)(3) (0 to 240 °C)(3)
(0 to 260 °C)(3)
(0 to 315 °C)
D
Silicone 200
0.93
-49 to 401 °F
-49 to 401 °F
-49 to 401 °F
-49 to 401 °F
(-45 to 205 °C) (-45 to 205 °C)
(-45 to 205 °C)
(-45 to 205 °C)
H
Inert
1.85
-49 to 320 °F
-49 to 320 °F
-49 to 320 °F
-49 to 320 °F
(Halocarbon)
(-45 to 160 °C) (-45 to 160 °C)
(-45 to 160 °C)
(-45 to 160 °C)
G(4)(5)
Glycerine
1.13
5 to 203 °F
5 to 203 °F
5 to 203 °F
5 to 203 °F
and Water
(-15 to 95 °C)
(-15 to 95 °C)
(-15 to 95 °C)
(-15 to 95 °C)
N(4)
Neobee M-20 0.92
5 to 401 °F(3)
5 to 437 °F
5 to 437 °F
5 to 437 °F
(-15 to 225 °C)
(-15 to 225 °C)
(-15 to 205 °C) (-15 to 225 °C)
P(4)(5)
Propylene
1.02
5 to 203 °F
5 to 203 °F
5 to 203 °F
5 to 203 °F
Glycol and
(-15 to 95 °C)
(-15 to 95 °C)
(-15 to 95 °C)
(-15 to 95 °C)
Water
★
★
Standard
★
★
★
★
★
★
★
★
Seal Connection Type
Standard
A
Standard
★
Direct Mount
Direct Mount Connection Type
Extension Length
Seal System
Connection Type
Standard
Standard
All Coplanar Transmitters (3051S_C, 3051C and 2051C)
94
Direct Mount, No Extension
93
Direct Mount, No Extension
96
Direct Mount, No Extension
97
Direct Mount, No Extension
B4
Direct Mount, 2 in. (50 mm) Extension
B3
Direct Mount, 2 in. (50 mm) Extension
B6
Direct Mount, 2 in. (50 mm) Extension
B7
Direct Mount, 2 in. (50 mm) Extension
D4
Direct Mount, 4 in. (100 mm) Extension
D3
Direct Mount, 4 in. (100 mm) Extension
D6
Direct Mount, 4 in. (100 mm) Extension
D7
Direct Mount, 4 in. (100 mm) Extension
All In-Line Transmitters (3051S_T, 3051T, 2051T, 2088)
95
Direct Mount, No Extension
D5
Thermal Optimizer
Tuned-System Assembly, two seals
One Seal System
Tuned-System Assembly, two seals
One Seal System
Tuned-System Assembly, two seals
One Seal System
Tuned-System Assembly, two seals
One Seal System
Tuned-System Assembly, two seals
One Seal System
Tuned-System Assembly, two seals
One Seal System
Welded-Repairable
Welded-Repairable
All Welded
All Welded
Welded-Repairable
Welded-Repairable
All Welded
All Welded
Welded-Repairable
Welded-Repairable
All Welded
All Welded
★
★
★
★
★
★
★
★
★
★
★
★
One Seal System
One Seal System
All Welded
All Welded
★
★
(1) All welded system connection types require either a 316L SST or Alloy C-276 isolating diaphragm in the pressure transmitter model codes.
(2) At ambient pressure of 14.7 psia (1 bar-a) and ambient temperature of 70°F and must be further derated if ambient, temperature exceeds 70 °F (21 °C).
(3) Maximum process temperature is limited by heat transfer to the transmitter.
(4) This is a food grade fill fluid.
(5) Not suitable for vacuum applications.
37
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Continue specifying a completed model number by choosing a remote seal type below:
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
● = Transmitter Availability
— = Unavailable
Coplanar
Extensions
Flanged Seal Assemblies
Inline 0 in. 2-in.
4-in.
Process Connections
Standard
Standard
★
page 47
FFW Flush Flanged Seal
●
(1)
●
●
2-in. / DN 50 / 50A
3-in. / DN 80 / 80A
4-in. / DN 100 / 100A
page 50
RFW Flanged Seal
●
—
●
●
1/2-in.
/ DN 15
/4-in.
1-in. / DN 25 / 25A
11/2-in. / DN 40 / 40A
★
page 53
EFW Extended Flanged Seal
●
(1)
●
●
1 1/2-in. / DN 40 / 40A
2-in. / DN 50 / 50A
3-in. / Headbox
/ DN 80 / 80A
4-in. / Headbox
/ DN 100 / 100A
★
page 57
FCW Flush Flanged Seal – Ring Type Joint
(RTJ) Gasket Surface
●
(1)
●
●
2-in.
3-in.
page 59
RCW Ring Type Joint (RTJ) Flanged Seal
●
—
●
●
½-in.
¾-in.
1-in.
1 ½-in.
page 61
FUW and FVW Flush Flanged Type Seals
●
●
●
●
DN 50
DN 80
3
Expanded
Coplanar
Extensions
Threaded Seal Assemblies
Inline 0 in. 2-in.
4-in.
Process Connections
Standard
page 62
RTW Threaded Seal
●
—
●
●
¼ –18 NPT
3/8 –18 NPT
½ –14 NPT
¾ –14 NPT
1 – 11.5 NPT
1 ¼ –11.5 NPT
1 ½ –11.5 NPT
G1/2 A DIN 16288
R1/2 per ISO 7/1
page 65
HTS Male Threaded Seal
●
●
●
●
G1
G1 ½
G2
1-11.5 NPT
1 ½ -11.5 NPT
2-11.5 NPT
Expanded
38
Standard
★
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Coplanar
Extensions
Hygienic Seal Assemblies
Inline 0 in. 2-in.
4-in.
Process Connections
Standard
page 66
SCW Hygienic Tri-Clover Style Tri-Clamp
Seal
●
●
●
●
1 ½-in.
2-in.
2 ½-in.
3-in.
4-in.
page 67
SSW Hygienic Tank Spud Seal
●
●
●
●
2-in. Extension
6-in. Extension
page 68
STW Hygienic Thin Wall Tank Spud Seal
●
—
●
●
0.8 in Extension
page 69
EES Hygienic Flanged Tank Spud
Extended Seal
●
●
●
●
DN 50
DN 80
page 70
VCS Tri-clamp® In-Line Seal
●
—
—
—
1-in.
1 ½-in.
2-in.
3-in.
4-in.
page 71
SVS Varivent® Compatible Hygienic
Connection Seal
●
●
●
●
Tuchenhagen Varivent®
Compatible
page 72
SHP Hygienic Cherry-Burrell “I” Line Seal
●
—
—
—
2-in.
3-in.
page 73
SLS Dairy Process Connection - Female
Thread Seal per DIN 11851
●
—
—
—
DN 40
DN 50
Standard
★
★
Expanded
Coplanar
Extensions
Specialty Seal Assemblies
Inline 0 in. 2-in.
4-in.
—
●
Process Connections
Expanded
page 74
WSP Saddle Seal
●
●
2-in.
3-in.
4-in. or Larger
39
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
page 75
UCP Male Threaded Pipe Mount Seals and
PMW Paper Mill Sleeve Seals
●
●
—
—
1 ½-in. with Threaded
Knurled Nut
1-in. with Cap Screw
Retainer
page 76
CTW Chemical Tee Seal
●
—
●
●
Retro-fit
page 77
TFS Wafer Style In-Line Seal
●
—
—
—
page 78
WFW Flow-Thru Flanged Seal
●
—
●
●
1-in. / DN 25
1 ½-in. / DN 40
2-in. / DN 50
3-in. / DN 80
4-in. / DN 100
1-in.
2-in.
3-in.
(1) Available with ANSI Class 300 or EN 1092-1 PN 40 or JIS B2238 20K or lower flange ratings.
40
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Rosemount 1199 Remote Mount Seal Systems
Rosemount 1199 Remote Mount Seals are used commonly at the top of the
vessel when a DP measurement is required. They are available in three
different diameters to optimize time response and reduce temperature
effects.
Product features and capabilities include:
• Remote Mount Seals can be used for high temperature applications
• Remote Mount Seals are used on the low pressure side of the transmitter
for Tuned-System Assemblies that can be used for DP measurements in
closed or pressurized tank applications
• Variety of process connections
Tuned-System Assembly
Comprised of 3051_L with
1199 Flanged Seal
• Quantified performance for the entire transmitter / seal assembly (QZ
option)
Additional Information
Specifications: page 79
Certifications: page 91
Dimensional Drawings: page 104
Rosemount 1199 Remote Mount Seal
The 1199 Remote Mount Seal also requires specification of a Rosemount pressure transmitter. See the appropriate
Product Data Sheet for the desired transmitter and include the option indicated in the table below for the
configuration desired.
Table 14. When ordering Rosemount 1199 Direct and Remote Mount Seals, please make sure to add the correct seal system
ordering code to the transmitter model
Transmitter Model
2 Seals
1 Seal
3051S_C
3051C - Welded-Repairable
3051C - All Welded
2051C
3051T, 2051T, 2088
B12
S2
S8 or S9
S2
—
B11
S1
S7 or S0
S1
S1
A 1199 Remote Mount Seal consists of 2 parts. First, specify the capillary model codes found on page 42. Then,
specify a remote seal found on page 43.
Ordering Codes
1199 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Remote Mount Connection page 42
Seal Connection page 43
41
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Capillary/Fill Fluid
NOTE:
Use Table 15 for Capillary Type Connections. Use Table 13 for Direct Mount Type Connections.
Table 15. Rosemount 1199 Remote Mount Seal Systems Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Model
Product Description
1199
Seal System
Connection Type
Seal System
Standard
3051S and 2051 Coplanar Transmitters (3051S_C and 2051C)
W
Welded-Repairable
One or Two Seal System
M
Welded-Repairable
One or Two Seal System
D
Welded-Repairable
Two Seal System
R(1)
All Welded
One Seal System
T(1)
All Welded
Two Seal System
S(1)
All Welded
Two Seal System
All In-Line Transmitters (3051S_T, 3051T, 2051T, 2088)
W
All Welded
One or Two Seal System
3051 Coplanar Transmitters (3051C)
W
Determined by Transmitter Code One or Two Seal System
M
Determined by Transmitter Code One or Two Seal System
D
Determined by Transmitter Code Two Seal System
Seal Location
Standard
High Side of Transmitter
Low Side of Transmitter
Balanced System - Same Seal on Low and High
Side
High Side of Transmitter
High Side of Transmitter
Low Side of Transmitter
★
★
★
High Side of Transmitter
★
High Side of Transmitter
Low Side of Transmitter
Balanced System - Same Seal on Low and High
Side
★
★
★
Seal Fill Fluid
Specific Gravity at
77 °F (25 °C)
Temperature Limits(2)
Standard
A(3)
Syltherm XLT
C
Silicone 704
D
Silicone 200
H
Inert (Halocarbon)
G(4)(5) Glycerin and Water
N(4)
Neobee M-20
P(4)(5)
Propylene Glycol and Water
0.85
1.07
0.93
1.85
1.13
0.92
1.02
–102 to 293 °F (–75 to 145 °C)
32 to 599 °F (0 to 315 °C)
–49 to 401 °F (–45 to 205 °C)
–49 to 320 °F (–45 to 160 °C)
5 to 203 °F (–15 to 95 °C)
5 to 437 °F (–15 to 225 °C)
5 to 203 °F (–15 to 95 °)
★
★
★
Standard
★
★
★
★
★
★
★
Seal Connection Type / Capillary ID, Description
Standard
B
0.03-in. (0.711 mm) ID
C
0.04-in. (1.092 mm) ID
D
0.075-in. (1.905 mm) ID
E
0.03-in. (0.711 mm) ID, PVC Coated
F
0.04-in. (1.092 mm) ID, PVC Coated
G
0.075-in. (1.905 mm) ID, PVC Coated
H
0.03-in. (0.711 mm) ID, 4-in. Support Tube
J
0.04-in. (1.092 mm) ID, 4-in. Support Tube
K
0.075-in. (1.905 mm) ID, 4-in. Support Tube
M(6)
0.03-in. (0.711 mm) ID, PVC Coated, 4-in. Support Tube with Closed End
N(6)
0.04-in. (1.092 mm) ID, PVC Coated, 4-in. Support Tube with Closed End
P(6)
0.075-in. (1.905 mm) ID, PVC Coated, 4-in. Support Tube with Closed End
Standard
★
★
★
★
★
★
★
★
★
★
★
★
Capillary Length / Direct Mount
Standard
01
1 ft (0.3 m)
05
5 ft (1.5 m)
42
Standard
★
★
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Table 15. Rosemount 1199 Remote Mount Seal Systems Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
★
★
★
★
★
★
★
★
★
★
★
★
★
10
10 ft (3.0 m)
15
15 ft (4.5 m)
20
20 ft (6.1 m)
51
1.6 ft (0.5 m)
52
3.3 ft (1.0 m)
53
4.9 ft (1.5 m)
54
6.6 ft (2.0 m)
55
8.2 ft (2.5 m)
56
9.8 ft (3.0 m)
57
11.5 ft (3.5 m)
58
13.1 ft (4.0 m)
59
16.4 ft (5.0 m)
60
19.7 ft (6.0 m)
Expanded
25
25 ft (7.6 m)
30
30 ft (9.1 m)
35
35 ft (10.7 m)
40
40 ft (12.2 m)
45
45 ft (13.7 m)
50
50 ft (15.2 m)
61
23 ft (7.0 m)
62
26.2 ft (8.0 m)
63
29.5 ft (9.0 m)
64
32.8 ft (10.0 m)
65
36.1 ft (11.0 m)
66
39.4 ft (12.0 m)
67
42.6 ft (13.0 m)
68
45.9 ft (14.0 m)
69
49.2 ft (15.0 m)
(1) All welded system connection types require either a 316L SST or Alloy C-276 isolating diaphragm in the pressure transmitter model codes.
(2) At ambient pressure of 14.7 psia (1 bar-a) and ambient temperature of 70°F and must be further derated if ambient, temperature exceeds 70 °F (21 °C).
(3) Temperature limits are reduced in vacuum service and may be limited by seal selection.
(4) This is a food grade fill fluid.
(5) Not suitable for vacuum applications.
(6) Compression fitting does not provide a hermetic seal.
Continue specifying a completed model number by choosing a remote seal type below:
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Flanged Seal Assemblies
Process Connections
Standard
page 47
FFW Flush Flanged Seal
2-in. / DN 50 / 50A
3-in. / DN 80 / 80A
4-in. / DN 100 / 100A
page 50
RFW Flanged Seal
1/2-in.
/ DN 15
/4-in.
1-in. / DN 25 / 25A
11/2-in. / DN 40 / 40A
3
Standard
★
★
43
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
1 1/2-in. / DN 40 / 40A
2-in. / DN 50 / 50A
3-in. / Headbox
/ DN 80 / 80A
4-in. / Headbox
/ DN 100 / 100A
2-in. / DN50
3-in. / DN 80
page 53
EFW Extended Flanged Seal
page 55
PFW Pancake Seal
page 57
FCW Flush Flanged Seal – Ring Type Joint (RTJ) Gasket Surface
2-in.
3-in.
page 59
RCW Ring Type Joint (RTJ) Flanged Seal
½-in.
¾-in.
1-in.
1 ½-in.
page 61
FUW and FVW Flush Flanged Type Seals
DN 50
DN 80
★
★
Expanded
Threaded Seal Assemblies
Process Connections
Standard
page 62
RTW Threaded Seal
¼ –18 NPT
3
/8 –18 NPT
½ –14 NPT
¾ –14 NPT
1 – 11.5 NPT
1 ¼ –11.5 NPT
1 ½ –11.5 NPT
G1/2 A DIN 16288
R1/2 per ISO 7/1
page 65
HTS Male Threaded Seal
G1
G1 ½
G2
1-11.5 NPT
1 ½ -11.5 NPT
2-11.5 NPT
Standard
★
Expanded
Hygienic Seal Assemblies
Process Connections
Standard
page 66
44
SCW Hygienic Tri-Clover Style Tri-Clamp Seal
1 ½-in.
2-in.
2 ½-in.
3-in.
4-in.
Standard
★
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
page 67
SSW Hygienic Tank Spud Seal
2-in. Extension
6-in. Extension
page 68
STW Hygienic Thin Wall Tank Spud Seal
0.8 in Extension
page 69
EES Hygienic Flanged Tank Spud Extended Seal
DN 50
DN 80
page 70
VCS Tri-clamp® In-Line Seal
1-in.
1 ½-in.
2-in.
3-in.
4-in.
page 71
SVS Varivent® Compatible Hygienic Connection Seal
Tuchenhagen Varivent
Compatible
page 72
SHP Hygienic Cherry-Burrell “I” Line Seal
2-in.
3-in.
page 73
SLS Dairy Process Connection - Female Thread Seal per DIN 11851
DN 40
DN 50
★
Expanded
Specialty Seal Assemblies
Process Connections
Expanded
page 74
WSP Saddle Seal
2-in.
3-in.
4-in. or Larger
page 75
UCP Male Threaded Pipe Mount Seals and PMW Paper Mill Sleeve
Seals
1 ½-in. with Threaded
Knurled Nut
1-in. with Cap Screw
Retainer
45
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
46
page 76
CTW Chemical Tee Seal
Retro-fit
page 77
TFS Wafer Style In-Line Seal
1-in. / DN 25
1 ½-in. / DN 40
2-in. / DN 50
3-in. / DN 80
4-in. / DN 100
page 78
WFW Flow-Thru Flanged Seal
1-in.
2-in.
3-in.
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Flanged Seal Assemblies
FFW FLUSH FLANGED SEAL
Table 16. FFW Flush Flanged Seal – Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Code
Standard
A
D
Expanded
J
Industry Standards
ANSI/ASME B16.5 (American National Standards Institute/American Society of Mechanical Engineers)
EN 1092-1 (European Standard)
Standard
★
★
JIS B2238 (Japanese Industrial Standard)
Process Connection Style
Standard
FFW
Standard
★
Flush Flanged Seal
Process Connection Size
Standard
G
7
J
9
ANSI/ASME B16.5
EN 1092-1
JIS B2238
2-in.
3-in.
—
4-in.
DN 50
—
DN 80
DN 100
50 A
80 A
—
100 A
ANSI/ASME B16.5
EN 1092-1
JIS B2238
Class 150
Class 300
Class 600
—
—
—
—
PN 40
10K
20K
40K
—
—
Class 900
Class 1500
Class 2500
—
—
—
PN 10 / 16 (DN 100 only)
—
—
—
PN 63
PN 100
PN 160
—
—
—
—
—
—
—
Diaphragm and Wetted
Upper Housing
Flange
316L SST
316L SST
Alloy C-276, seam welded
Alloy C-276, seam welded
Tantalum, seam welded
Tantalum, seam welded
Tantalum, brazed
Tantalum, brazed
316L SST
316L SST
316L SST
316L SST
316L SST
316L SST
316L SST
316L SST
CS
316 SST
CS
316 SST
CS
316 SST
CS
316 SST
Standard
★
★
★
★
Flange / Pressure Rating
Standard
1
2
4
G
Expanded
E
5
6
7
H
J
K
Standard
★
★
★
★
Diaphragm and Wetted, Upper Housing, Flange Material
Standard
CA(1)(2)
DA(2)
CB(1)(3)
DB(3)
CC(1)
DC
C3(1)(2)(3)(4)
D3(1)(2)(3)(4)
Standard
★
★
★
★
★
★
★
★
47
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Table 16. FFW Flush Flanged Seal – Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Expanded
MB(1)(2)
KB(1)(2)
DJ
DF
DV
RH(2) (5)
DH(6)
DE
DP
WW(2)(7)
DZ(6)
D4
D5
Alloy C-276, solid faceplate
Alloy C-276, solid faceplate
Alloy B
304L SST
Alloy 400
Titanium Grade 4
Titanium Grade 4
Alloy 600
Nickel 201
316Ti SST (WNr 1.4571)
Zirconium 702
Alloy C-22
Duplex 2507 SST
Alloy C-276 / 316L SST
Alloy C-276 / 316L SST
316L SST
316L SST
316L SST
Titanium GR.4
316L SST
316L SST
316L SST
316Ti SST (WNr 1.4571)
316L SST
316L SST
316L SST
CS
316 SST
316 SST
316 SST
316 SST
316 SST
316 SST
316 SST
316 SST
316Ti SST (WNr 1.4571)
316 SST
316 SST
316 SST
Flushing Connection Ring Material (Lower Housing)(8)
Standard
0
A
B
Expanded
2
H
6
V
None
316L SST
Alloy C-276
Standard
★
★
★
Duplex 2205 SST
Titanium Grade 4
Nickel 201
Alloy 400
Flushing Connection Options, Quantity (Size)
Standard
0
1
3
7
9
None
1 (1/4-18 NPT)
2 (1/4-18 NPT)
1 (1/2-14 NPT)
2 (1/2-14 NPT)
Standard
★
★
★
★
★
Options (Include with selected model number)
Gasket Material
Standard
J
Expanded
N
K
PTFE gasket (for use with flushing connection ring)
Standard
★
Grafoil gasket (for use with flushing connection ring)
Barium Sulfate filled PTFE gasket (for use with flushing connection ring)
Flushing Plug, Vent/Drain Valve
Standard
D
G
H
Alloy C-276 plug(s) for flushing connection(s)
316 SST plug(s) for flushing connection(s)
316 SST vent/drain for flushing connection(s)
Diaphragm Thickness
Expanded
C
7
0.006-in. (150 µm) available with 316L SST, Alloy C-276, and Duplex 2507 SST for abrasive applications
0.002-in. (50 µm) available with 316L SST and Alloy C-276
Mounting Flange
Expanded
4(9)
48
Flat face, flush flanged
Standard
★
★
★
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Table 16. FFW Flush Flanged Seal – Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Code Conformance
Standard
T(10)
Wetted Materials Compliance to NACE MRO175/ISO 15156, MRO103
Standard
★
Gasket Surface Finish
Expanded
1
Gasket Surface Ra 125 Max.
Cold Temp Application
Standard
B
Extra Fill For Cold Temp Application
Standard
★
Diaphragm Coating
Expanded
U(11)
V(12)
0.001-in. (25 µm) gold plated Diaphragm
PTFE coated diaphragm for nonstick purposes only
Capillary Change
Expanded
2
Radial capillary connection
Alternate Design
Standard
E(12)
One Piece Design
Typical Model Number: 1199 W DC 1 0 A FFW 7 1 DA 0 0
Standard
★
(1) Only available with two piece design.
(2) For use with spiral wound metallic gaskets.
(3) Not available with option code C.
(4) Only available in Process Connection Size code G, 7, and J.
(5) Not available with welded capillary connections or direct mount.
(6) Operating temperature limited to 302 °F (150 °C).
(7) Only available with one-piece design, option code E.
(8) Supplied standard with ThermoTork TN9000.
(9) The mounting flange and upper housing are a single item for the one-piece design. Only available with diaphragm and wetted part material codes DA, DB,
DJ, DF, DV, DH, DE, DP, WW, DZ, D4, DC, and D5.
(10) Materials of Construction comply with metallurgical requirements highlighted within NACE MR0175/ISO 15156 for sour oil field production environments.
Environmental limits apply to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR0103 for sour refining
environments.
(11) Only available on 316LSS, Alloy 400 and Alloy C-276.
(12) Not available with transmitter option code Q8, for Material Traceability per EN 10204 3.1 of the transmitter / seal assembly.
49
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
RFW FLANGED SEAL
Table 17. RFW Flanged Seal Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Code
Industry Standard
Standard
A
ANSI/ASME B16.5 (American National Standards Institute/American Society of Mechanical Engineers)
D
EN 1092-1 (European Standard)
Expanded
J
JIS B2238 (Japanese Industrial Standard)
Standard
★
★
Process Connection Style
Standard
RFW
Standard
★
Flanged Seal
Process Connection Size
Standard
2
4
D
F
Expanded
1
A
B
C
Standard
ANSI/ASME B16.5
EN 1092-1
JIS B2238
1-in.
11/2-in.
—
—
—
—
DN 25
DN 40
25A
40A
—
—
1
—
DN 10
DN 15
DN 20
—
10A
15A
20A
ANSI/ASME B16.5
EN 1092-1
JIS B2238
Class 150
Class 300
Class 600
—
—
—
—
PN 40
10K
20K
40K
—
Class 900
Class 1500
Class 2500
—
—
—
—
—
—
PN 63
PN 100
PN 160
—
—
—
—
—
—
Diaphragm
Upper Housing
Flange
316L SST
316L SST
Alloy C-276
Alloy C-276
Tantalum
Tantalum
316L SST
316L SST
316L SST
316L SST
316L SST
316L SST
CS
316 SST
CS
316 SST
CS
316 SST
304L SST
Alloy B
Alloy 600
316L SST
316L SST
316L SST
316 SST
316 SST
316 SST
/2-in.
3/4-in.
—
—
★
★
★
★
Flange/Pressure Rating
Standard
1
2
4
G
Expanded
5
6
7
H
J
K
Standard
★
★
★
★
Diaphragm, Upper Housing, Flange Material
Standard
CA
DA
CB
DB
CC
DC
Expanded
DF
DJ
DE
50
Standard
★
★
★
★
★
★
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Table 17. RFW Flanged Seal Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
DV
DP
DK
RH(1)
DH
D4
D5
DZ
Alloy 400
Nickel 201
Alloy 20
Titanium Grade 4
Titanium Grade 4
Alloy C-22
Duplex 2507 SST
Zirconium 702
316L SST
316L SST
316L SST
Titanium Grade 4
316L SST
316L SST
316L SST
316L SST
316 SST
316 SST
316 SST
316 SST
316 SST
316 SST
316 SST
316 SST
Flushing Connection Ring Material (Lower Housing)(2)
Standard
A
B
D
Expanded
2
F
H
V
C
316L SST
Alloy C-276
Plated CS
Standard
★
★
★
Duplex 2205
304L SST
Titanium Grade 4
Alloy 400
Tantalum lined 316L SST (no flushing connection allowed)
Flushing Connection Options, Quantity Size
Standard
5
1
3
Expanded
7
9
None
1 (1/4-18 NPT)
2 (1/4-18 NPT)
Standard
★
★
★
1 (1/2-14 NPT)
2 (1/2-14 NPT)
Options (Include with selected model number)
Gasket Material
Standard
J
Expanded
N
K
R
PTFE gasket
Standard
★
Grafoil® gasket
Barium Sulfate filled PTFE gasket
Ethylene Propylene gasket
Flushing Plug, Vent/Drain Valve
Standard
D
G
H
Alloy C-276 plug(s) for flushing connection(s)
316 SST plug(s) for flushing connection(s)
316 SST vent/drain for flushing connection(s)
Standard
★
★
★
Diaphragm Thickness
Expanded
C
0.006-in. (150 µm) available with 316L SST, Alloy C-276, and Duplex 2507 SST for abrasive applications
Bolt Material
Expanded
3
304 SST Bolts (Only available for Stud Bolt Design)
Code Conformance
Standard
T(3)
Wetted Materials Compliance to NACE MRO175/ISO 15156, MRO103
Standard
★
Gasket Surface Finish
Expanded
1
Gasket Surface Ra 125 Max.
51
Product Data Sheet
Rosemount DP Level
00813-0100-4016, Rev LA
January 2011
Table 17. RFW Flanged Seal Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Cold Temperature Application
Standard
B
Extra Fill For Cold Temp Application
Standard
★
Diaphragm Coating
Expanded
0.001-in. (25 µm) Gold plated diaphragm
U(4)
V(5)
PTFE coated diaphragm for nonstick purposes only
Large Diaphragm Size
Expanded
9
4.1-in. (104 mm) Diaphragm Diameter
Typical Model Number: 1199 W DC 1 0 A RFW 2 1 DA A 5
(1) Not available with welded capillary connections or direct mount.
(2) Supplied with C4401 Aramid fiber gasket.
(3) Materials of Construction comply with metallurgical requirements highlighted within NACE MR0175/ISO 15156 for sour oil field production environments.
Environmental limits apply to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR0103 for sour refining
environments.
(4) Only available on 316LSS, Alloy 400 and Alloy C-276.
(5) Not available with transmitter option code Q8, for Material Traceability per EN 10204 3.1 of the transmitter / seal assembly.
52
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
EFW EXTENDED FLANGED SEAL
Table 18. EFW Extended Flanged Seal Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
●
Code
Industry Standard
= Available
— = Unavailable
Standard
A
ANSI/ASME B16.5 (American National Standards Institute/American Society of Mechanical Engineers)
D
EN 1092-1 (European Standard)
Expanded
J
JIS B2238 (Japanese Industrial Standards)
Standard
★
★
Process Connection Style
Standard
EFW
Extended Flanged Seal
Standard
★
Process Connection Size
Standard
7
9
Expanded
4
G
H
K
ANSI/ASME B16.5
EN 1092-1
JIS B2238
Extension Diameters
3-in.
4-in.
DN 80
DN 100
80A
100A
2.58-in. (66 mm)
3.50-in. (89 mm)
11/2-in.
2-in.
3-in. (Headbox)
4-in. (Headbox)
DN 40
DN 50
DN 80 (Headbox)
DN 100 (Headbox)
40A
50A
—
1.45-in. (37 mm)
1.90-in. (49 mm)
2.875-in. (74 mm)
3.780-in. (97 mm)
ANSI/ASME B16.5
EN 1092-1
JIS B2238
Class 150
Class 300
Class 600
—
—
—
—
PN 40
10K
20K
40K
—
—
Class 900
Class 1500
Class 2500
—
—
—
PN 10/16 (DN 100 only)
—
—
—
PN 63
PN 100
PN 160
—
—
—
—
—
—
—
Standard
★
★
Flange/Pressure Rating
Standard
1
2
4
G
Expanded
E
5
6
7
H
J
K
Diaphragm, Extension and Gasket Surface, Upper Housing, Flange Material
Code
Standard
DA
CA
DB
CB
Expanded
DM
DD
DC
Diaphragm
Extension/
Gasket Surface
Upper
Housing
Mounting
Flange
316L SST
316L SST
Alloy C-276
Alloy C-276
316L SST
316L SST
Alloy C-276
Alloy C-276
316L SST
316L SST
316L SST
316L SST
Alloy C-276
Tantalum
Tantalum
316L SST
316L SST
Tantalum Lined
316L SST
316L SST
316L SST
Standard
★
★
★
★
Available with Process
Connection Code
7
9
4
G
H
K
316 SST
CS
316 SST
CS
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
316 SST
316 SST
316 SST
●
●
●
●
●
●
●
●
—
●
●
—
—
—
—
—
—
●
Standard
★
★
★
★
53
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Table 18. EFW Extended Flanged Seal Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
D5
D9
Duplex 2507 SST Duplex 2205 SST
Duplex 2507 SST 316L SST
316L SST
316L SST
316 SST
316 SST
●
●
●
●
●
●
●
●
●
●
●
●
Extension Length
Standard
2
4
6
Expanded
8
1
3
5
7
9
ANSI/ASME B16.5
EN 1092-1 / JIS B2238
2-in.
4-in.
6-in.
50 mm
100 mm
150 mm
8-in.
1-in.
3-in.
5-in.
7-in.
9-in.
200 mm
25 mm
75 mm
125 mm
175 mm
225 mm
Standard
★
★
★
Fractional Extension Length
ANSI/ASME B16.5
Standard
0
0-in.
EN 1092-1 / JIS B2238
0 mm
Standard
★
Options (Include with selected model number)
Diaphragm Thickness
Expanded
C
0.006-in. (150 µm) available with 316L SST, Alloy C-276, and Duplex 2507 SST for abrasive applications
Code Conformance
Standard
T(1)
Wetted Materials Compliance to NACE MRO175/ISO 15156, MRO103
Standard
★
Gasket Surface Finish
Expanded
1
Gasket Surface Ra 125 Max.
Cold Temperature Application
Standard
B
Extra Fill For Cold Temperature Application
Standard
★
Diaphragm Coating
Expanded
U(2)
0.001-in. (25 µm) Gold plated diaphragm
V(3)
PTFE coated diaphragm for nonstick purposes only
Typical Model Number: 1199 W DC 1 0 A EFW 7 1 DA 2 0
(1) Materials of Construction comply with metallurgical requirements highlighted within NACE MR0175/ISO 15156 for sour oil field production environments.
Environmental limits apply to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR0103 for sour refining
environments.
(2) Only available on 316LSS, Alloy 400 and Alloy C-276.
(3) Not available with transmitter option code Q8, for Material Traceability per EN 10204 3.1 of the transmitter / seal assembly.
54
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
PFW PANCAKE SEAL
Table 19. PFW Pancake Seal Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Code
Industry Standard
Standard
A
D
ANSI/ASME B16.5 (American National Standards Institute/American Society of Mechanical Engineers)
EN 1092-1 (European Standard)
Standard
★
★
Process Connection Style
Standard
PFW
Standard
★
Pancake Seal
Process Connection Size
Standard
G
7
J
ANSI
EN 1092-1
2-in.
3-in.
—
DN 50
—
DN 80
Standard
★
★
★
Flange/Pressure Rating
ANSI
Standard
0
1
2
4
G
Expanded
5
6
7
H
J
EN 1092-1
Standard
★
★
★
★
★
Seal MWP based on customer supplied flange
Class 150
—
Class 300
—
Class 600
—
—
PN40
Class 900
Class 1500
Class 2500
—
—
—
—
—
PN 63
PN 100
Diaphragm and Wetted, Upper Housing, Flange Material
Standard
LA(1)
CA(1)
DA(1)
LB
CB
DB
LC
CC
DC
Diaphragm and Wetted
Upper Housing
Flange
316L SST
316L SST
316L SST
Alloy C-276, Seam Welded
Alloy C-276, Seam Welded
Alloy C-276, Seam Welded
Tantalum, Seam Welded
Tantalum, Seam Welded
Tantalum, Seam Welded
316L SST
316L SST
316L SST
316L SST
316L SST
316L SST
316L SST
316L SST
316L SST
None
CS
316 SST
None
CS
316 SST
None
CS
316 SST
Standard
★
★
★
★
★
★
★
★
★
Flushing Connection Ring Material (Lower Housing)(2)
Standard
0
A
B
None
316L SST
Alloy C-276
Standard
★
★
★
55
Product Data Sheet
Rosemount DP Level
00813-0100-4016, Rev LA
January 2011
Table 19. PFW Pancake Seal Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Flushing Connection Options, Quantity (Size)
Standard
0
1
3
7
9
None
1 (1/4-18 NPT)
2 (1/4-18 NPT)
1 (1/2-14 NPT)
2 (1/2-14 NPT)
Standard
★
★
★
★
★
Options (Include with selected model number)
Gasket Material
Standard
J
PTFE gasket
Expanded
N
Grafoil® gasket
K
Barium Sulfate filled PTFE gasket
Standard
★
Flushing Plug, Vent/Drain Valve
Standard
D
G
H
Alloy C-276 plug(s) for flushing connection(s)
316 SST plug(s) for flushing connection(s)
316 SST vent/drain for flushing connection(s)
Standard
★
★
★
Diaphragm Thickness
Expanded
C
0.006-in. (150 µm) available with 316L SST, Alloy C-276, and Duplex 2507 SST for abrasive applications
Code Conformance
Standard
T(3)
Wetted Materials Compliance to NACE MRO175/ISO 15156, MRO103
Standard
★
Gasket Surface Finish
Expanded
1
Gasket Surface Ra 125 Max.
Cold Temperature Application
Standard
B
Extra Fill For Cold Temp Application
Standard
★
Diaphragm Coating
Expanded
U(4)
0.001-in. (25 µm) Gold plated diaphragm
V(5)
PTFE coated diaphragm for nonstick purposes only
Typical Model Number: 1199 W DC 1 0 A PFW 7 1 DA 0 0
(1) For use with customer supplied spiral wound metallic gaskets.
(2) Supplied standard with Thermo Torque TN9000 gasket.
(3) Materials of Construction comply with metallurgical requirements highlighted within NACE MR0175/ISO 15156 for sour oil field production environments.
Environmental limits apply to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR0103 for sour refining
environments.
(4) Only available on 316LSS, Alloy 400, and Alloy C-276.
(5) Not available with transmitter option code Q8, for Material Traceability per EN 10204 3.1 of the transmitter / seal assembly.
56
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
FCW FLUSH FLANGED SEAL – RING TYPE JOINT (RTJ) GASKET SURFACE
Table 20. FCW Flush Flanged Seal – Ring Type Joint (RTJ) Gasket Surface Ordering Information
This seal is part of the Expanded offering and is subject to additional delivery lead time.
Code
Industry Standards
Expanded
A
ANSI/ASME B16.5 (American National Standards Institute/American Society of Mechanical Engineers)
Process Connection Style
Expanded
FCW
Flush Flanged Seal - Ring Type Joint Gasket Surface
Process Connection Size
Expanded
G
2-in.
7
3-in.
Flange/Pressure Rating
Expanded
1
2
4
5
6
7
Class 150
Class 300
Class 600
Class 900
Class 1500
Class 2500
Diaphragm and Wetted, Upper Housing, Flange Material
Diaphragm and Wetted
Expanded
DA
316L SST
KB
Alloy C-276
K5
Duplex 2507 SST/Duplex 2205
Upper Housing
Flange
316L SST
316L SST
316L SST
316 SST
316 SST
316 SST
Flushing Connection Ring Material (Lower Housing)
Expanded
0
None
A
316L SST
B
Alloy C-276
2
Duplex 2205 SST
Flushing Connection Options
Expanded
0
None
1
1 (1/4-18 NPT)
3
2 (1/4-18 NPT)
7
1 (1/2-14 NPT)
9
2 (1/2-14 NPT)
Options (Include with selected model number)
Flushing Plug, Vent/Drain Valve
Expanded
D
Alloy C-276 plug(s) for flushing connection(s)
G
316 SST plug(s) for flushing connection(s)
H
316 SST vent/drain for flushing connection(s)
57
Product Data Sheet
Rosemount DP Level
00813-0100-4016, Rev LA
January 2011
Table 20. FCW Flush Flanged Seal – Ring Type Joint (RTJ) Gasket Surface Ordering Information
This seal is part of the Expanded offering and is subject to additional delivery lead time.
Diaphragm Thickness
Expanded
C
0.006-in. (150 µm) available with 316L SST, Alloy C-276, and Duplex 2507 SST for abrasive applications
7
0.002-in. (50 µm) available with 316L SST and Alloy C-276
Code Conformance
Expanded
T(1)
Wetted Materials Compliance to NACE MRO175/ISO 15156, MRO103
Cold Temp Application
Expanded
B
Extra Fill For Cold Temp Application
Diaphragm Coating
Expanded
U(2)
0.001-in. (25 µm) Gold plated diaphragm
V(3)
PTFE coated diaphragm for nonstick purposes only
Alternate Design
Expanded
E
One Piece Design
Typical Model Number: 1199 W DC 1 0 A FCW 7 1 DA 0 0
(1) Materials of Construction comply with metallurgical requirements highlighted within NACE MR0175/ISO 15156 for sour oil field production environments.
Environmental limits apply to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR0103 for sour refining
environments.
(2) Only available on 316LSS and Alloy C-276.
(3) Not available with transmitter option code Q8, for Material Traceability per EN 10204 3.1 of the transmitter / seal assembly.
58
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
RCW RING TYPE JOINT (RTJ) FLANGED SEAL
Table 21. RCW Ring Type Joint Flanged Seal Ordering Information
This seal is part of the Expanded offering and is subject to additional delivery lead time.
Code
Industry Standard
Expanded
A
ANSI/ASME B16.5 (American National Standards Institute/American Society of Mechanical Engineers)
Process Connection Style
Expanded
RCW
Flanged Seal - Ring Type Joint Gasket Surface
Process Connection Size
Expanded
1
A
2
4
1
/2-in.
3/4-in.
1-in.
11/2-in.
Flange/Pressure Rating
Expanded
1
2
4
5
6
7
Class 150
Class 300
Class 600
Class 900
Class 1500
Class 2500
Diaphragm, Upper Housing, Flange Material
Expanded
DA
DB
DC
DE
DF
DJ
DV
DP
RH
DH(1)
D4
D5
DZ(1)
DK
Diaphragm
Upper Housing
Flange
316L SST
Alloy C-276
Tantalum
Alloy 600
304L SST
Alloy B316L SST
Alloy 400
Nickel 201
Titanium Grade 4
Titanium Grade 4
Alloy 22
Duplex 2507 SST
Zirconium 702
Alloy 20
316L SST
316L SST
316L SST
316L SST
316L SST
316L SST
316L SST
316L SST
Titanium Grade 4
316L SST
316L SST
316L SST
316L SST
316L SST
316 SST
316 SST
316 SST
316 SST
316 SST
316 SST
316 SST
316 SST
316 SST
316 SST
316 SST
316 SST
316 SST
316 SST
Flushing Connection Ring Material (Lower Housing)
Expanded
A
316L SST
B
Alloy C-276
F
304L SST
H
Titanium Grade 4
2
Duplex 2205 SST
V
Alloy 400
Flushing Connection Options
Expanded
5
None
1
1 (1/4-18 NPT)
59
Product Data Sheet
Rosemount DP Level
00813-0100-4016, Rev LA
January 2011
Table 21. RCW Ring Type Joint Flanged Seal Ordering Information
This seal is part of the Expanded offering and is subject to additional delivery lead time.
3
7
9
2 (1/4-18 NPT)
1 (1/2-14 NPT)
2 (1/2-14 NPT)
Options (Include with selected model number)
Gasket Material
Expanded
J
N
K
R
PTFE gasket
Grafoil® gasket
Barium Sulfate filled PTFE gasket
Ethylene Propylene gasket
Flushing Plug, Vent/Drain Valve
Expanded
D
G
H
Alloy C-276 plug(s) for flushing connection(s)
316 SST plug(s) for flushing connection(s)
316 SST vent/drain for flushing connection(s)
Diaphragm Thickness
Expanded
C
0.006-in. (150 µm) available with 316L SST, Alloy C-276, and Duplex 2507 SST for abrasive applications
Bolt Material (Optional)
Expanded
3
304 SST Bolts (Only available for Stud Bolt Design)
Code Conformance
Expanded
T(2)
Wetted Materials Compliance to NACE MRO175/ISO 15156, MRO103
Cold Temperature Application
Expanded
B
Extra Fill For Cold Temp Application
Diaphragm Coating
Expanded
U(3)
V(4)
0.001-in. (25 µm) Gold plated diaphragm
PTFE coated diaphragm for nonstick purposes only
Large Diaphragm Size
Expanded
9
4.1-in. (104 mm) Diaphragm Diameter
Typical Model Number: 1199 W DC 1 0 A RCW 2 1 DA A 5
(1) Operating temperature is limited to 302 °F (150 °C).
(2) Materials of Construction comply with metallurgical requirements highlighted within NACE MR0175/ISO 15156 for sour oil field production environments.
Environmental limits apply to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR0103 for sour refining
environments.
(3) Only available on 316LSS, Alloy 400, and Alloy C-276.
(4) Not available with transmitter option code Q8, for Material Traceability per EN 10204 3.1 of the transmitter / seal assembly.
60
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
FUW AND FVW FLUSH FLANGED TYPE SEALS
Table 22. FUW and FVW Flush Flanged Type Seals – EN Ordering Information
This seal is part of the Expanded offering is subject to additional delivery lead time.
Code
Industry Standard
Expanded
D
EN 1092-1 (European Standard)
Process Connection Style
Expanded
FUW
Flush Flanged, EN 1092-1 Type D (Groove)
FVW
Flush Flanged, EN 1092-1 Type C (Tongue)
Process Connection Size
Expanded
G
DN 50
J
DN 80
Flange/Pressure Rating
Expanded
G
PN 40
Diaphragm and Wetted, Upper Housing, Flange Material
Diaphragm and Wetted
Expanded
DA(1)
316L SST
KB(2)
Alloy C-276
DC(1)
Tantalum
Upper Housing
Flange
316L SST
316L SST
316L SST
316 SST
316 SST
316 SST
Flushing Connection Ring Material (Lower Housing)
Expanded
0
None
Flushing Connection Options, Quantity (Size)
Expanded
0
None
Options (Include with selected model number)
Cold Temperature Application
Expanded
B
Extra Fill For Cold Temperature Application
Alternate Design
Expanded
E
One Piece Design
Typical Model Number: 1199 W DC 1 0 A FUW J G DA 0 0
(1) Only available with one piece design, option code E.
(2) Only available with two-piece design.
61
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Threaded Seal Assemblies
RTW THREADED SEAL
Table 23. RTW Threaded Seal Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Code
Industry Standard
Standard
A
D
ANSI/ASME B1.20.1 (American National Standards Institute/American Society of Mechanical Engineers
EN 10226-1 (European Standard)
Standard
★
★
Process Connection Style
Standard
RTW
Standard
★
Threaded (standard thread is female, for male select Option code 9)
Process Connection Size
Standard
3
4
5
7(1)
Expanded
1
C
2
6(1)
N
ANSI/ASME B1.20.1
EN 10226-1
1
/2-14 NPT
3/4-14 NPT
1-11.5 NPT
11/2-11.5 NPT
—
—
—
—
1/4-18
—
Parallel thread: G1/2A DIN 16288
—
—
Tapered thread: R1/2 per ISO 7/1
NPT
—
3
/8-18 NPT
11/4-11.5 NPT
—
Standard
★
★
★
★
Pressure Rating
Standard
0
Expanded
2(2)
3(2)(3)
8
ANSI/ASME B1.20.1
EN 10226-1
2500 psi
172 bar
5000 psi
10000 psi
1500 psi (4.1-in. (104 mm) diaphragm
344 bar
—
103 bar (4.1-in. (104 mm) diaphragm
Standard
★
Diaphragm, Upper Housing, Flange Material
Standard
CA
DA
CB
DB
CC
DC
Expanded
DJ
DF
DP
DV
RH(4)
DH(5)
62
Diaphragm
Upper Housing
Flange
316L SST
316L SST
Alloy C-276
Alloy C-276
Tantalum
Tantalum
316L SST
316L SST
316L SST
316L SST
316L SST
316L SST
CS
316 SST
CS
316 SST
CS
316 SST
Alloy B
304L SST
Nickel 201
Alloy 400
Titanium Grade 4
Titanium Grade 4
316L SST
316L SST
316L SST
316L SST
Titanium Grade 4
316L SST
316 SST
316 SST
316 SST
316 SST
316 SST
316 SST
Standard
★
★
★
★
★
★
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Table 23. RTW Threaded Seal Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
D4
D5
DE
DZ(5)
DK
RZ(4)
Alloy 22
Duplex 2507 SST
Alloy 600
Zirconium 702
Alloy 20
Zirconium 702
316L SST
316L SST
316L SST
316L SST
316L SST
Zirconium 702
316 SST
316 SST
316 SST
316 SST
316 SST
316 SST
Flushing Connection Ring Material (Lower Housing)(6)(7)
Standard
A
B
Expanded
D
2
H
V
F
316L SST
Alloy C-276
Standard
★
★
Plated Carbon Steel
Duplex 2205 SST
Titanium Grade 4
Alloy 400
304L SST
Flushing Connection Options
Standard
5
1
3
Expanded
7
9
None
1 (1/4-18 NPT)
2 (1/4-18 NPT)
Standard
★
★
★
1 (1/2-14 NPT)
2 (1/2-14 NPT)
Options (Include with selected model number)
Gasket Material
Standard
J
N
R
Expanded
K
PTFE gasket (for use with flushing connection ring)
Grafoil® gasket (for use with flushing connection ring)
Ethylene Propylene gasket (for use with flushing connection ring)
Standard
★
★
★
Barium Sulfate filled PTFE gasket (for use with flushing connection ring)
Flushing Plug, Vent/Drain Valve
Standard
D
G
H
Alloy C-276 plug(s) for flushing connection(s)
316 SST plug(s) for flushing connection(s)
316 SST vent/drain for flushing connection(s)
Standard
★
★
★
Diaphragm Thickness
Expanded
C
0.006-in. (150 µm) available with 316L SST, Alloy C-276, and Duplex 2507 SST for abrasive applications
Bolt Material
Standard
3
Expanded
4
304 SST Bolts
Standard
★
316 SST Bolts
Code Conformance
Standard
T
Wetted Materials Compliance to NACE MRO175/ISO 15156, MRO103
Standard
★
Cold Temperature Application
Standard
B
Extra Fill For Cold Temp Application
Standard
★
63
Product Data Sheet
Rosemount DP Level
00813-0100-4016, Rev LA
January 2011
Table 23. RTW Threaded Seal Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Diaphragm Coating
Expanded
U(8)
V(9)
0.001-in. (25 µm) Gold plated diaphragm
PTFE coated diaphragm for nonstick purposes only
Special Threads in Lower Housing
Expanded
9
Male Threads
Typical Model Number: 1199 W DC 1 0 A RTW 3 0 DA A 5
(1) Flushing connection not available.
(2) Consult an Emerson Process Management representative for pricing and availability on Pressure Rating codes 2 or 3.
(3) The following process connection sizes are D rated: 3/4-in (9000 psi/621 bar), 1-in. (8700 psi/600 bar), 11/4-in (7000 psi/483 bar), and
11/2-in. (6000 psi/414 bar).
(4) Not available with welded capillary connections or direct mount.
(5) Operating temperature is limited to 302 °F (150 °C).
(6) Supplied with C4401 aramid fiber gasket.
(7) Flushing Connection Ring/ Lower Housing assembly bolts provided as standard are carbon steel for ANSI and 304 SST for EN.
(8) Only available on 316LSS, Alloy 400, and Alloy C-276.
(9) Not available with transmitter option code Q8, for Material Traceability per EN 10204 3.1 of the transmitter / seal assembly.
64
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
HTS MALE THREADED SEAL
Table 24. HTS Male Threaded Flush Type Seal Ordering Information(1)
This seal is part of the Expanded offering and is subject to additional delivery lead time.
Code
Industry Standard
Expanded
A
ANSI/ASME B1.20.1 (American National Standards Institute/American Society of Mechanical Engineers)
D
EN 10226-1 (European Standard)
Process Connection Style
Expanded
HTS
Male Threaded Seal
Process Connection Size, Pressure Rating
ANSI/ASME B1.20.1
Expanded
5A
1-11,5 NPT, 8700 psi (600 bar)
7A
1½-11,5 NPT, 6000 psi (414 bar)
9A
2-11,5 NPT, 4000 psi (276 bar)
EA
—
GA
—
JA
—
EN 10226-1
—
—
—
G1, 455 bar (6598 psi)
G11/2, BSP, 400 bar (5800 psi)
G2, BSP, 280 bar (4060 psi)
Diaphragm and Wetted, Upper Housing Material
Diaphragm and Wetted
Expanded
LA00
316L SST
Typical Model Number:
Upper Housing
316L SST
1199 W DC 1 0 A HTS 7 A LA 0 0
(1) Consult an Emerson Process Management representative for use with low calibrated spans.
65
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Hygienic Seal Assemblies
SCW HYGIENIC TRI-CLOVER STYLE TRI-CLAMP SEAL
Table 25. SCW Hygienic Tri-Clover Style Tri-Clamp Seal Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Industry Standard
Standard
S
Standard
★
Hygienic Seal (Conforms to 3-A Standard 74-03)
Process Connection Style
Standard
SCW(1)
Standard
★
Tri-Clover Style Tri-Clamp Seal
Process Connection Size
Standard
30(2)
50(3)
70
Expanded
60
90
Standard
★
★
★
1½-in.
2-in.
3-in.
2½-in.
4-in.
Diaphragm and Wetted, Upper Housing Material
Standard
LA00
Expanded
LB00
Diaphragm and Wetted
Upper Housing
316L SST
316L SST
Alloy C-276
316L SST
Options (Include with selected model number)
Surface Finish
Expanded
D
G
H
10 in. (0.25 m) Ra surface finish
15 in. (0.375 m) Ra surface finish
20 in. (0.50 m) Ra surface finish
Non-Hygienic Fill Fluid
Expanded
P
Non-Hygienic fill fluid (does not conform to 3-A Standard 74)
Clamp and Gasket Material
Expanded
2
3
High-Pressure Ladish Clamp & Nitrile butadiene (NBR) gasket
Nitrile butadiene (NBR) gasket
Polishing
Expanded
6
Electro polishing
Typical Model Number: 1199 W NC 1 0 S SCW 7 0 LA 0 0
(1) Clamp and gasket furnished by user. The maximum working pressure is dependent upon the clamp pressure rating.
(2) Consult factory for calibrated spans lower than 15 psi (1034 mbar).
(3) Consult factory for calibrated spans lower than 5 psi (345 mbar).
66
Standard
★
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
SSW HYGIENIC TANK SPUD SEAL
Table 26. SSW Hygienic Tank Spud Seal Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.
Code
Industry Standard
Standard
S
Hygienic Seal (Conforms to 3-A Standard 74-03)
Process Connection Style
Standard
★
Standard
SSW(1) Tank Spud Seal
Process Connection Size, Pressure Rating
Standard
★
Standard
A0
4-in. Sch. 5 Tri-Clamp, 600 psi (41 bar)
Upper Housing
Standard
★
Standard
A
316L SST
Diaphragm and Wetted, Extension Material
Standard
★
Diaphragm and Wetted
Standard
AL
316L SST(2)
Expanded
BB
Alloy C-276
Extension Length
Extension
316L SST(2)
316L SST
Standard
2
2-in.
6
6-in.
Standard
★
★
Standard
★
★
Options (Include with selected model number)
Surface Finish
Expanded
15 in. (0.375 m) diaphragm surface finish
G(3)
H
20 in(0.5 m) diaphragm surface finish
Diaphragm Thickness
Expanded
C
0.006-in. (150 m)
Tank Spud
Standard
1
Tank Spud Included with Shipment
Non-Hygienic Fill Fluid
Standard
★
Expanded
P
Non-Hygienic fill fluid (Does not conform to 3-A Standard 74)
Non-Hygienic Fill Fluid
Expanded
3
Nitrile butadiene (NBR) O-ring instead of Standard Ethylene Propylene O-ring (Conforms to 3-A Standard 74)
4
Flourocarbon (FMK)® O-ring, instead of Standard Ethylene Propylene O-ring (Conforms to 3-A Standard 74)
Polishing
Expanded
6
Electro polishing
Typical Model Number: 1199 W NC 1 0 S SSW A 0 AA L 2
(1) Clamp and Ethylene Propylene o-ring (conforms to 3-A standard 74 and USP class VI) supplied.
(2) Diaphragm brazed and TIG-welded to extension.
(3) Requires Option code 6, Electro polishing.
67
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
STW HYGIENIC THIN WALL TANK SPUD SEAL
Table 27. STW Hygienic Thin Wall Tank Spud Seal Ordering Information
This seal is part of the Expanded offering and is subject to additional delivery lead time.
Code
Industry Standard
Expanded
S
Hygienic Seal (Conforms to 3-A Standard 74-03)
Process Connection Style
Expanded
STW(1)
Thin Wall Tank Spud Seal
Process Connection Size, Pressure Rating
Expanded
B0
4-in. Tri-Clamp, 600 psi (41 bar)
Diaphragm and Wetted, Extension Material
Expanded
LA00
BB00
Diaphragm and Wetted
Extension
316L SST
Alloy C-276
316L SST
Alloy C-276
Options (Include with selected model number)
Surface Finish
Expanded
G(2)
H
15 in. (0.375 m) diaphragm surface finish
20 in(0.5 m) diaphragm surface finish
Non-Hygienic Fill Fluid
Expanded
P
Non-Hygienic fill fluid (Does not conform to 3-A Standard 74)
Polishing
Expanded
6
Electro polishing
Typical Model Number: 1199 W NC 1 0 S STW B 0 LA 0 0
(1) For tank walls up to 3/16-in. thick. Clamp and Ethylene Propylene o-ring supplied.
(2) Requires Option code 6, Electro polishing.
68
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
EES HYGIENIC FLANGED TANK SPUD EXTENDED SEAL
Table 28. EES Hygienic Flanged Tank Spud Extended Seal Ordering Information
This seal is part of the Expanded offering and is subject to additional delivery lead time.
Code
Industry Standard
Expanded
S
Hygienic Seal (Conforms to 3-A Standard 74-03)
Process Connection Style
Expanded
EES
Flanged Tank Spud Seal
Process Connection Size, Pressure Rating
Expanded
GG
DN 50, PN 40
JG
DN 80, PN 40
Diaphragm and Wetted, Extension Material
Diaphragm and Wetted
Expanded
LA
316L SST
LB
Alloy C-276
Extension Length(1)
Expanded
10
Extension
316L SST
316L SST
25 mm (1-in.)
Options (Include with selected model number)
Surface Finish
Expanded
15 µ-in. (0.375 µm) Ra surface finish
G(2)
H
20 µ-in. (0.50 µm) Ra surface finish
Gasket Material
Expanded
1
Flourocarbon (FMK) O-ring, instead of Standard Ethylene Propylene O-ring (Conforms to 3-A Standard 74)
Cold Temperature Application
Expanded
B
Polishing
Extra Fill For Cold Temperature Application
Expanded
6
Electro polishing
Typical Model Number: 1199 W NC 1 0 S EES J G LA 1 0
(1) Other extension lengths are available upon request.
(2) Requires Option code 6, Electro polishing.
69
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
VCS TRI-CLAMP® IN-LINE SEAL
Table 29. VCS Tri-Clamp In-Line Seal Ordering Information
This seal is part of the Expanded offering and is subject to additional delivery lead time.
Code
Industry Standard
Expanded
S
Hygienic Seal (Conforms to 3-A Standard 74-03)
Process Connection Style
Expanded
VCS(1)
In-Line Tri-Clover Style Tri-Clamp Seal
Process Connection Size
Expanded
20(2)
30(3)
50
70
90
1-in.
1½-in.
2-in.
3-in.
4-in.
Diaphragm and Wetted, Upper Housing Material
Diaphragm and Wetted
Expanded
LA00
316L SST
Upper Housing
316L SST
Options (Include with selected model number)
Surface Finish
Expanded
G(4)
15 -in. (0.375 m) Ra surface finish
H
20 µ-in. (0.50 µm) Ra surface finish
Non-Hygienic Fill Fluid
Expanded
P
Non-Hygienic fill fluid (does not conform to 3-A Standard 74)
Polishing
Expanded
6
Electro polishing
Typical Model Number: 1199 W NC 1 0 S VCS 7 0 LA 0 0
(1) Gasket and clamp are furnished by the user. The maximum working pressure is dependent upon the clamp pressure rating.
(2) Consult factory for calibrated spans lower than 15 psi (1034 mbar).
(3) Consult factory for calibrated spans lower than 5 psi (345 mbar).
(4) Requires Option code 6, Electro polishing.
70
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
SVS VARIVENT® COMPATIBLE HYGIENIC CONNECTION SEAL
Table 30. SVS Varivent® Compatible Hygienic Connection Seal Ordering Information
This seal is part of the Expanded offering and is subject to additional delivery lead time.
Code
Industry Standard
Expanded
S
Hygienic Seal (Conforms to 3-A Standard 74-03)
Process Connection Style
Expanded
SVS
Tuchenhagen Varivent Compatible Seal
Process Connection Size
Expanded
V0(1)
Varivent® Type N DN 40-162
Diaphragm and Wetted, Upper Housing Material
Diaphragm and Wetted
Expanded
LA00
316L SST
Upper Housing
316L SST
Options (Include with selected model number)
Non-Hygienic Fill Fluid
Expanded
P
Non-Hygienic fill fluid (does not conform to 3-A Standard 74)
Cold Temperature Application
Expanded
B
Extra Fill For Cold Temperature Application
Polishing
Expanded
6
Electro polishing
Typical Model Number: 1199 W NC 1 0 S SVS V 0 LA 0 0
(1) Consult factory for calibrated spans lower than 15 psi (1034 mbar).
71
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
SHP Hygienic Cherry-Burrell “I” LINE SEAL
Table 31. SHP Hygienic Cherry-Burrell “I” Line Seal Ordering Information
This seal is part of the Expanded offering and is subject to additional delivery lead time.
Code
Industry Standard
Expanded
S
Hygienic Seal (Conforms to 3-A Standard 74-03)
Process Connection Style
Expanded
SHP(1)
Cherry-Burrell “I” Line Style Seal
Process Connection Size
Expanded
50(2)
70
2-in.
3-in.
Diaphragm and Wetted, Upper Housing Material
Expanded
AA00
Diaphragm and Wetted
Upper Housing
316L SST
316L SST
Options (Include with selected model number)
Non-Hygienic Fill Fluid
Expanded
P
Non-Hygienic fill fluid (does not conform to 3-A Standard 74)
Typical Model Number: 1199 W NC 1 0 S SHP 7 0 AA 0 0
(1) Clamp and gasket furnished by user. Maximum working pressure is the lesser of either clamp pressure rating or 500 psi.
(2) Consult factory for calibrated spans lower than 5 psi (345 mbar).
72
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
SLS DAIRY PROCESS CONNECTION - FEMALE THREAD SEAL PER DIN 11851
Table 32. SLS Hygienic Dairy Process Connection Female Thread Seal Ordering Information
This seal is part of the Expanded offering and is subject to additional delivery lead time.
Code
Industry Standard
Expanded
S
Hygienic Seal (Conforms to 3-A Standard 74-03)
Process Connection Style
Expanded
SLS
Dairy Process Connection - Female Thread
Process Connection Size, Pressure Rating, Material
Expanded
F0(1)
G0(2)
DIN 11851 with coupling nut DN 40, PN 40, 304 SST
DIN 11851 with coupling nut DN 50, PN 25, 304 SST
Diaphragm and Wetted, Upper Housing Material
Expanded
LA00
Diaphragm and Wetted
Upper Housing
316L SST
316L SST
Options (Include with selected model number)
Polishing
Expanded
6
Electro polishing
Typical Model Number: 1199 W HC 1 0 S SLS J 0 LA 0 0
(1) Consult factory for calibrated spans lower than 15 psi (1034 mbar).
(2) Consult factory for calibrated spans lower than 5 psi (345 mbar).
73
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Specialty Seal Assemblies
WSP SADDLE SEAL
Table 33. WSP Saddle Seal Ordering Information
This seal is part of the Expanded offering and is subject to additional delivery lead time.
Code
Industry Standard
Expanded
N
Non-Industry Standard
Process Connection Style
Expanded
WSP
Saddle Seal
Process Connection Size
Expanded
G
2-in. Pipe size
7
3-in. Pipe size
9
4-in. or larger Pipe size
Pressure Rating
Expanded
1
1500 psig at 100 °F (103 bar at 38 °C) eight bolt holes
0
1250 psig at 100 °F (86 bar at 38 °C) six bolt holes
Diaphragm, Upper Housing Material
Diaphragm
Expanded
LA
316L SST
LB
Alloy C-276
LC
Tantalum
Lower Housing Material(1)(2)
Expanded
00
L5
B5
D5
Upper Housing
316L SST
316L SST
316L SST
None
316L SST
Alloy C-276
Plated Carbon Steel
Options (Include with selected model number)
Gasket Material
Expanded
J
PTFE gasket
N
Grafoil® gasket
Code Conformance
Expanded
T
Wetted Materials Compliance to NACE MRO175/ISO 15156, MRO103
Diaphragm Coating
Expanded
PTFE Coated Diaphragm for nonstick purposes (316L SST and Alloy C-276 diaphragms only)
V(3)
Typical Model Number: 1199 W DC 1 0 N WSP 7 1 LA L N
(1) Standard pipe schedule 40/40S, for other pipe schedules consult the factory.
(2) Supplied with C4401 Aramid fiber gasket.
(3) Not available with transmitter option code Q8, for Material Traceability per EN10204 3.1 of the transmitter / seal assembly.
74
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
UCP MALE THREADED PIPE MOUNT SEALS AND PMW PAPER MILL
SLEEVE SEALS
Table 34. UCP and PMW Threaded Pipe Mount Seal Ordering Information
This seal is part of the Expanded offering and is subject to additional delivery lead time.
Industry Standard
Expanded
N
Non-Industry Standard
Process Connection Style
Expanded
UCP
PMW
Male Threaded Pipe Mount Seal
Paper Mill Sleeve
Process Connection Size, Pressure Rating
Expanded
30(1)
50(2)
11/2-in., Threaded Knurled Nut, 600 psi at 100 °F (41 bar at 38 °C) (UCP only)
1-in., Cap Screw Retainer, 300 psi at 100 °F (21 bar at 38 °C) (PMW only)
Diaphragm and Wetted, Upper Housing Material
Expanded
AA
BB
Diaphragm and Wetted
Upper Housing
316L SST
Alloy C-276
316L SST
Alloy C-276
Lower Housing Material
Expanded
00
A0
B0
None
316L SST
Alloy C-276
Options (Include with selected model number)
Diaphragm Coating
Expanded
PTFE coated diaphragm for nonstick purposes only
V(3)
Typical Model Number: 1199 W DC 1 0 N UCP 3 0 AA A 0
(1) Only available with UCP process connection size. Consult factory for calibrated spans lower than 50 psi (3,4 bar).
(2) Only available with PMW process connection size. Consult factory for calibrated spans lower than 100 psi (6,9 bar).
(3) Not available with transmitter option code Q8, for Material Traceability per EN10204 3.1 of the transmitter / seal assembly.
75
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
CTW CHEMICAL TEE SEAL
Table 35. CTW Chemical Tee Seal Ordering Information
This seal is part of the Expanded offering and is subject to additional delivery lead time.
Code
Industry Standard
Expanded
N
Non-Industry Standard
Process Connection Style
Expanded
CTW
Chemical Tee Seal
Maximum Working Pressure (Flange Rating)
Expanded
20
300 psi (21 bar)
Diaphragm and Wetted, Upper Housing Material
Expanded
AA
BB
Diaphragm and Wetted
Upper Housing
316L SST
Alloy C-276
316L SST
Alloy C-276
Lower Housing
Expanded
00
None
Options (Include with selected model number)
Code Conformance
Expanded
T
Wetted Materials Compliance to NACE MRO175/ISO 15156, MRO103
Diaphragm Coating
Expanded
V(1)
PTFE coated diaphragm for nonstick purposes only
Typical Model Number: 1199 W NC 1 0 N CTW 2 0 AA 0 0
(1) Not available with transmitter option code Q8, for Material Traceability per EN10204 3.1 of the transmitter / seal assembly.
76
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
TFS WAFER STYLE IN-LINE SEAL
Table 36. TFS Wafer Style In-Line Seal Ordering Information
This seal is part of the Expanded offering and is subject to additional delivery lead time.
Code
Industry Standard
Expanded
A
ANSI/ASME B16.5 (American National Standards Institute/American Society of Mechanical Engineers)
D
EN 1092-1 (European Standard)
Process Connection Style
Expanded
TFS
Wafer Style In-Line Seal
Process Connection Size
Expanded
G
7
J
9
2(1)
4(2)
D(1)
F(2)
K
ANSI/ASME B16.5
EN 1092-1
2-in.
3-in.
—
4-in.
1-in.
1½-in.
—
—
—
DN 50
—
DN 80
—
—
—
DN 25
DN 40
DN 100
Pressure Rating
Expanded
0
Seal MWP based on customer supplied flange
Diaphragm and Wetted, Upper Housing Material
Diaphragm and Wetted
Expanded
LA
316L SST
LB
Alloy C-276
Upper Housing
316L SST
316L SST
Housing Body Length
Expanded
00
3.54-in. (90 mm)
Typical Model Number: 1199 W DC 1 0 A TFS 7 0 LA 0 0
(1) Consult factory for calibrated spans lower than 15 psi (1034 mbar).
(2) Consult factory for calibrated spans lower than 5 psi (345 mbar).
77
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
WFW FLOW-THRU FLANGED SEAL
Table 37. WFW Flow-Thru Flanged Seal Ordering Information
This seal is part of the Expanded offering and is subject to additional delivery lead time.
Code
Industry Standard
Expanded
A
ANSI/ASME B16.5 (American National Standards Institute/American Society of Mechanical Engineers)
Process Connection Style
Expanded
WFW(1) Flow-Thru Flanged Seal
Process Connection Size(2)
Expanded
G
2-in.
7
3-in.
2
1-in.
Flange Rating(2)
Expanded
1
Class 150(2)
Diaphragm, Upper Housing Material
Upper Housing(2)
Diaphragm
Expanded
LA
316L SST
Lower Housing Material
316L SST
(1)
Expanded
L
316L SST
Pipe Schedule(2)
Expanded
N
40/40S
Options (Include with selected model number)
Gasket Material
Expanded
J
PTFE O-ring
K
Barium Sulfate filled PTFE gasket
N
Grafoil® gasket
R
Ethylene Propylene gasket
Bolt Material
Expanded
3
304 SST bolts
Code Conformance
Expanded
T
Wetted Materials Compliance to NACE MRO175/ISO 15156, MRO103
Cold Temperature Application
Expanded
B
Extra Fill For Cold Temperature Application
Typical Model Number: 1199 W DC 1 0 A TFS 7 0 LA 0 0
(1) Supplied with C4401 Aramid fiber gasket.
(2) Consult factory for special process connection sizes, flange pressure ratings, diaphragm/lower housing materials, and pipe schedules.
78
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Specifications
LIQUID LEVEL TRANSMITTER
SPECIFICATIONS
Performance Specifications
For zero-based spans, reference conditions, silicone oil fill, glass-filled PTFE O-rings, SST materials, Coplanar flange (3051SMV, 3051S_C) or
1
/2-in.- 14 NPT (3051S_T) process connections, digital trim values set to equal range points.
Conformance to Specification (±3 (Sigma))
Technology leadership, advanced manufacturing techniques, and statistical process control ensure measurement specification conformance to
±3or better.
Reference Accuracy(1)
Stated reference accuracy equations include terminal based linearity, hysteresis, and repeatability, but does not include analog output
reference accuracy of ±0.005% of span.
For FOUNDATION™ fieldbus and wireless devices, use calibrated range in place of span.
3051SAL_C
±0.065% of span;
For spans less than 10:1,
URL
 0.015 + 0.005  -------------- % of span
 span
3051L
All Ranges
±0.075% of span
For spans less than 10:1, accuracy =
URL
 0.025 + 0.005  --------------- % of Span
 Span
2051L
Ranges 2-4
±0.075% of span
For spans less than 10:1, accuracy =
URL
 0.025 + 0.005  --------------- % of Span
 Span
(1) Stated reference accuracy equations include terminal based linearity, hysteresis, and repeatability, but does not include analog only reference accuracy of
±0.005% of span.
DP Reference Accuracy of 3051S ERS System(1)
Two Coplanar Gage Sensors (3051SAM_ _G)
Ranges 2-4
Range 5
Ultra
Classic
±0.035% of DP span
±0.071% of DP span
±0.078% of DP span
±0.092% of DP span
Two Coplanar Absolute Sensors (3051SAM_ _A)
Ranges 1-4
Ultra
Classic
±0.035% of DP span
±0.078% of DP span
Two In-Line Gage Sensors (3051SAM_ _T)
Two In-Line Absolute Sensors (3051SAM_ _E)
Ranges 1-4
Ultra
Classic
±0.035% of DP span
±0.078% of DP span
Two Liquid Level Sensors (3051SAL)
Ranges 1-5
Ultra
Classic
±0.092% of DP span
±0.092% of DP span
(1) DP Accuracy specifications for the 3051S ERS System assume that the configuration contains two sensors with identical ranges that are
calibrated 0 – URL, and that the DP Span = 10% of each sensor’s URL.
79
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Warranty(1)
Models(1)
Ultra
3051SAM and 3051SAL
12-year limited
Classic
warranty(2)
1-year limited warranty(3)
(1) Warranty details can be found in Emerson Process Management Terms and Conditions of Sale, Document 63445, Rev G (10/06).
(2) Rosemount Ultra and Ultra for Flow transmitter have a limited warranty of twelve (12) years from date of shipment. All other provisions of Emerson Process
Management standard limited warranty remains the same.
(3) Goods are warranted for twelve (12) months from the date of initial installation or eighteen (18) months from the date of shipment by seller, whichever period
expires first.
Dynamic Performance
See Instrument Toolkit®.
Ambient Temperature Effect
See Instrument Toolkit.
Mounting Position Effects
With liquid level remote mount seal in vertical plane, zero shift of up to ±1 inH2O (2,49 mbar); with remote mount seal in horizontal plane, zero
shift of up to ±5 inH2O (12,45 mbar) plus extension length on extended units; all zero shifts can be zeroed; no span effect.
Vibration Effect
3051SAM
3051SAL
Less than ±0.1% of URL when tested per the requirements of IEC60770-1 field or pipeline with high vibration level (10-60 Hz
0.21mm displacement peak amplitude / 60-2000 Hz 3g).
3051L
For Housing Style codes 1J, 1K, 1L, 2J, and 2M:
Less than ±0.1% of URL when tested per the requirements of IEC60770-1 field with general application or pipeline with low
vibration level (10-60 Hz 0.15mm displacement peak amplitude / 60-500 Hz 2g).
Measurement effect due to vibrations is negligible except at resonance frequencies. When at resonance frequencies,
vibration effect is less than ±0.1% of URL per g when tested between 15 and 2000 Hz in any axis relative to pipe-mounted
process conditions.
Less than ±0.1% of URL when tested per the requirements of IEC60770-1 field or pipeline with high vibration level (10-60 Hz
0.21mm displacement peak amplitude / 60-2000 Hz 3g).
2051L
Power Supply Effect
Less than ±0.005% of calibrated span per volt.
Electromagnetic Compatibility (EMC)
Meets all relevant requirements of EN 61326 and NAMUR NE-21.(1)
(1) NAMUR NE-21 does not apply to wireless output code X.
80
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Transient Protection (Option T1)
3051SAM
3051SAL
3051L
2051L
Meets IEEE C62.41.2-2002, Location Category B
6 kV crest (0.5 s - 100 kHz)
3 kA crest (8 × 20 microseconds)
6 kV crest (1.2 × 50 microseconds)
Meets IEEE C37.90.1-2002 Surge Withstand Capability
SWC 2.5 kV crest, 1.0 MHz wave form
Meets IEEE C62.41, Category B
6 kV crest (0.5 s - 100 kHz)
3 kV crest (8 × 20 microseconds)
6 kV crest (1.2 × 50 microseconds)
Meets IEEE C62.41, Category Location B
6 kV crest (0.5 s - 100 kHz)
3 kV crest (8 × 20 microseconds)
6 kV crest (1.2 × 50 microseconds)
Functional Specifications
Range and Sensor Limits
Range
Table 38. 3051SAM_ _G, 3051SAL_ _D, 3051SAL_ _G Range and Sensor Limits
2
3
4
5
Minimum Span
Range Limits
Lower (LRL)
Ultra
Classic
Upper (URL)
1.3 inH2O (3,11 mbar)
5.0 inH2O (12,4 mbar)
1.5 psi (103,4 mbar)
10.0 psi (689,5 mbar)
2.5 inH2O (6,23 mbar)
10.0 inH2O (24,9 mbar)
3.0 psi (206,8 mbar)
20.0 psi (1,38 bar)
250.0 inH2O (0,62 bar)
1000.0 inH2O (2,49 bar)
300.0 psi (20,7 bar)
2000.0 psi (137,9 bar)
3051S_LG(1)(2)
3051S_LD(1)
-250.0 inH2O (-0,62 bar)
-250.0 inH2O (-0,62 bar)
-393.0 inH2O (-979 mbar) -1000.0 inH2O (-2,49 bar)
-14.2 psig (-979 mbar)
-300.0 psi (-20,7 bar)
-14.2 psig (-979 mbar)
- 2000.0 psi (-137,9 bar)
(1) When specifying a 3051SAL Ultra, use Classic minimum span.
(2) Assumes atmospheric pressure of 14.7 psig (1 bar).
Range
Table 39. 3051SAM_ _A, 3051SAL_ _A Range and Sensor Limits(1)
Ultra
Classic
Upper (URL)
Lower (LRL)
1
2
3
4
0.3 psia (20,7 mbar)
0.75 psia (51,7 mbar)
4 psia (275,8 mbar)
20 psia (1,38 bar)
0.3 psia (20,7 mbar)
1.5 psia (0,103 bar)
8 psia (0,55 bar)
40 psia (2,76 bar)
30 psia (2,07 bar)
150 psia (10,34 bar)
800 psia (55,16 bar)
4000 psia (275,8 bar)
0 psia (0 bar)
0 psia (0 bar)
0 psia (0 bar)
0 psia (0 bar)
Minimum Span
Range and Sensor Limits
(1) When specifying a 3051SAL Ultra, use Classic minimum span.
Range
Table 40. 3051SAM_ _T, 3051SAM_ _E, 3051SAL_ _T, 3051SAL_ _E Range and Sensor Limits
Ultra
Classic
Upper (URL)
Lower (LRL) (Abs.)
Lower(1) (LRL) (Gage)
1
2
3
4
5
0.3 psi (20,7 mbar)
0.75 psi (51,7 bar)
4 psi (275,8 mbar)
20 psi (1,38 bar)
1000 psi (68,9 bar)
0.3 psi (20,7 mbar)
1.5 psi (0,103 bar)
8 psi (0,55 bar)
40 psi (2,76 bar)
2000 psi (137,9 bar)
30 psi (2,07 bar)
150 psi (10,34 bar)
800 psi (55,16 bar)
4000 psi (175,8 bar)
10000 psi (689,5 bar)
0 psia (0 bar)
0 psia (0 bar)
0 psia (0 bar)
0 psia (0 bar)
0 psia (0 bar)
-14.7 psig (-1,01 bar)
-14.7 psig (-1,01 bar)
-14.7 psig (-1,01 bar)
-14.7 psig (-1,01 bar)
-14.7 psig (-1,01 bar)
Minimum Span
Range and Sensor Limits
(1) Assumes atmospheric pressure of 14.7 psig (1 bar).
81
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Table 41. 3051L Range and Sensor Limits
Range
Range and Sensor Limits
2
3
4
5
Lower (LRL)
Minimum Span
Upper
(URL)
3051L Differential
3051L Gage
2.5 inH2O (6,2 mbar)
10 inH2O (24,9 mbar)
3 psi (0,20 bar)
20 psi (1,38 bar)
250 inH2O (0,62 bar)
1000 inH2O (2,49 bar)
300 psi (20,6 bar)
2000 psi (137,9 bar)
–250 inH2O (–0,62 bar)
–1000 inH2O (–2,49 bar)
–300 psi (–20,6 bar)
NA
–250 inH2O (–0,62 bar)
0.5 psia (34,5 mbar abs)
0.5 psia (34,5 mbar abs)
NA
Table 42. 2051L Range and Sensor Limits
Range
Range and Sensor Limits
2
3
4
Lower (LRL)
Minimum Span
Upper (URL)
2051L Differential
2051L Gage(1)
2.5 inH2O (6,2 mbar)
10 inH2O (24,9 mbar)
3 psi (0,207 bar)
250 inH2O (0,62 bar)
1000 inH2O (2,49 bar)
300 psi (20,6 bar)
–250 inH2O (–0,62 bar)
–1000 inH2O (–2,49 bar)
–300 psi (–20,7 bar)
–250 inH2O (–0,62 bar)
–393 inH2O (–979 mbar)
–14.2 psig (–979 mbar)
(1) Assumes atmospheric pressure of 14.7 psig.
Service
Liquid, gas, and vapor applications
Maximum loop resistance is determined by the voltage level of
the external power supplied as described by:
Standard HART Transmitter
Protocols
Maximum Loop Resistance = 43.5 * (Power Supply Voltage – 10.5)
4–20 mA (Output Code A)
Two-wire 4–20 mA, user-selectable for linear or square root
output. Digital process variable superimposed on 4–20 mA
signal, available to any host that conforms to the HART protocol.
Power Supply
1387
Load (Ohms)
Output
External power supply required. Standard transmitter (4–20 mA)
operates on 10.5 to 55 Vdc with no load. The 3051S ERS
System operates on 16 - 42.4 Vdc with no load.
Load Limitations
1000
500
Operating
Region
0
10.5
20
30
Voltage (Vdc)
42.4
The Field Communicator requires a minimum
loop resistance of 250 for communication.
3051S ERS System
If supply voltage ≤ 16.74 Vdc:
Maximum Loop Resistance = 277 * (Power Supply Voltage – 16.0)
If supply voltage > 16.74 Vdc:
Maximum Loop Resistance = 43.5 * (Power Supply Voltage – 12.0)
Load (Ohms)
1322
Operating
Region
206
0
16 16.74
42.4
Voltage (Vdc)
The Field Communicator requires a minimum
loop resistance of 250 for communication.
82
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
FOUNDATION fieldbus (output code F)
Arithmetic Block
Power Supply
External power supply required; transmitters operate on 9.0 to
32.0 Vdc transmitter terminal voltage.
Provides pre-defined application-based equations including flow
with partial density compensation, electronic remote seals,
hydrostatic tank gauging, ratio control, and others.
Signal Characterizer Block
Current Draw
17.5 mA for all configurations (including LCD display option)
Indication
Optional two line LCD Display
FOUNDATION fieldbus Function Block Execution Times
Execution Time (Milliseconds)
Block
3051SAL_C
3051L
2051L
Resource
Transducer
LCD Block
Analog Input 1, 2
PID
Input Selector
Arithmetic
Signal Characterizer
Integrator
Output Splitter
Control Selector
20
35(1)
20
20
20
20
20
20
30
45
30
35
40
35
N/A
N/A
35
45
30
35
40
35
N/A
N/A
Integrator Block
Compares the integrated or accumulated value from one or two
variables to pre-trip and trip limits and generates discrete output
signals when the limits are reached. This block is useful for
calculating total flow, total mass, or volume over time.
FOUNDATION fieldbus Diagnostics Suite (Option Code D01)
The FOUNDATION fieldbus Diagnostics provide Abnormal
Situation Prevention (ASP) indication. The integral statistical
process monitoring (SPM) technology calculates the mean and
standard deviation of the process variable 22 times per second.
The 3051S_L and 3051L use these values and highly flexible
configuration options for customization to detect many
user-defined or application specific abnormal situations (e.g.
detecting plugged impulse lines and fluid composition change).
Profibus PA (Output Code W)
(1) PID with Auto-tune.
Profile Version
FOUNDATION fieldbus Parameters
Schedule Entries
Links
Virtual Communications Relationships (VCR)
Characterizes or approximates any function that defines an
input/output relationship by configuring up to twenty X, Y
coordinates. The block interpolates an output value for a given
input value using the curve defined by the configured
coordinates.
7 (max.)
20 (max.)
12 (max.)
Standard Function Blocks
Resource Block
Contains hardware, electronics, and diagnostic information.
Transducer Block
Contains actual sensor measurement data including the sensor
diagnostics and the ability to trim the pressure sensor or recall
factory defaults.
LCD Block
Configures the local display.
2 Analog Input Blocks
Processes the measurements for input into other function
blocks. The output value is in engineering units or custom and
contains a status indicating measurement quality.
PID Block
Contains all logic to perform PID control in the field including
cascade and feedforward.
Backup Link Active Scheduler (LAS)
The transmitter can function as a Link Active Scheduler if the
current link master device fails or is removed from the segment.
Advanced Control Function Block Suite (Option Code A01)
Input Selector Block
Selects between inputs and generates an output using specific
selection strategies such as minimum, maximum, midpoint,
average, or first “good.”
3.02
Power Supply
External power supply required; transmitters operate on 9.0 to
32.0 Vdc transmitter terminal voltage.
Current Draw
17.5 mA for all configurations (including LCD display option)
Output Update Rate
Four times per second
Standard Function Blocks
Analog Input (AI Block)
The AI function block processes the measurements and makes
them available to the host device. The output value from the AI
block is in engineering units and contains a status indicating the
quality of the measurement.
Physical Block
The physical block defines the physical resources of the device
including type of memory, hardware, electronics, and diagnostic
information.
Transducer Block
Contains actual sensor measurement data including the sensor
diagnostics and the ability to trim the pressure sensor or recall
factory defaults.
Indication
Optional two line LCD display
Local Operator Interface
Optional external configuration buttons
83
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
3051SAL_C Wireless Self-Organizing Networks
Output
WirelessHART, 2.4 GHz DSSS.
Wireless, 2.4 GHz DSSS or 900 MHz FHSS.
Local Display (WirelessHART only)
The optional five-digit LCD can display user-selectable
information such as primary variable in engineering units,
percent of range, sensor module temperature, and electronics
temperature. Display updates at up to once per minute.
Local Display
The optional five-digit LCD can display primary variable in
engineering units. Display updates at update rate up to once per
minute.
Update Rate
WirelessHART, user selectable 8 sec. to 60 min.
Wireless, user selectable 15 sec. to 60 min.
Power Module (WirelessHART only)
Field replaceable, keyed connection eliminates the risk of
incorrect installation, Intrinsically Safe Lithium-thionyl chloride
Power Module with polybutadine terephthalate (PBT)
enclosure. Ten-year life at one minute update rate.(1)
(1) Reference conditions are 70 °F (21 °C), and routing data for three
additional network devices.
NOTE: Continuous exposure to ambient temperature limits of
-40 °F or 185 °F (-40 °C or 85 °C) may reduce specified life by less
than 20 percent.
Power Module
Field replaceable, keyed connection eliminates the risk of
incorrect installation, Intrinsically Safe Lithium-thionyl chloride
Power Module with polybutadine terephthalate (PBT)
enclosure. Five-year life at one minute update rate, ten-year life
at ten minute update rate.(1)
(1) Reference conditions are 70 °F (21 °C), and routing data for three
additional network devices.
NOTE: Continuous exposure to ambient temperature limits of
-40 °F or 185 °F (-40 °C or 85 °C) may reduce specified life by less
than 20 percent.
Overpressure Limits
Limit is 0 psia to the flange rating or sensor rating, whichever is
lower.
Table 43. 3051L and Level Flange Rating Limits
Standard
Type
CS Rating
SST Rating
ANSI/ASME
Class 150
285 psig
275 psig
ANSI/ASME
Class 300
740 psig
720 psig
ANSI/ASME
Class 600
1480 psig
1440 psig
At 100 °F (38 °C), the rating decreases
with increasing temperature, per ANSI/ASME B16.5.
DIN
PN 10–40
40 bar
40 bar
DIN
PN 10/16
16 bar
16 bar
DIN
PN 25/40
40 bar
40 bar
At 122 °F (50 °C), the rating decreases with increasing
temperature per EN 1092-1 Annex F.
84
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Temperature Limits
Ambient
-40 to 185 °F (-40 to 85 °C)
With LCD display(1): -40 to 175 °F (-40 to 80 °C)
With option code P0: -20 to 185 °F (-29 to 85 °C)
(1) LCD display may not be readable and LCD updates will be slower
at temperatures below -4 °F (-20 °C).
Storage
-50 to 185 °F (-46 to 85 °C)
With LCD display: -40 to 185 °F (-40 to 85 °C)
With Wireless Output: -40 to 185 °F (-40 to 85 °C)
Process Temperature Limits
Table 44. Fill Fluid Specifications
Seal Fill Fluid
Specific
Gravity at
77 °F (25
°C)
Coeff. Of
Therm. Exp.
(cc/cc/°C)
Viscosity at
77 °F (25 °C)
(Centistokes)
Temperature Limits(1)
No Extension
2-in. (50mm)
Extension
4-in. (100mm)
Extension
Thermal
Optimizer
Capillary
A
Syltherm XLT
0.85
0.001199
1.6
-102 to 293 °F
(-75 to 145 °C)
-102 to 293 °F
(-75 to 145 °C)
102 to 293 °F
(-75 to 145 °C)
102 to 293 °F
(-75 to 145 °C)
102 to 293 °F
(-75 to 145 °C)
C
Silicone 704
1.07
0.00095
44
32 to 401 °F
(0 to 205 °C)(2)
32 to 464 °F
(0 to 240 °C)(2)
32 to 500 °F
(0 to 260 °C)(2)
32 to 599 °F
(0 to 315 °C)
32 to 599 °F
(0 to 315 °C)
D
Silicone 200
0.93
0.000108
9.5
-49 to 401 °F
(-45 to 205 °C)
-49 to 401 °F
(-45 to 205 °C)
-49 to 401 °F
(-45 to 205 °C)
-49 to 401 °F
(-45 to 205 °C)
-49 to 401 °F
(-45 to 205 °C)
H
Inert
(Halocarbon)
1.85
0.000864
6.5
-49 to 320 °F
(-45 to 160 °C)
-49 to 320 °F
(-45 to 160 °C)
-49 to 320 °F
(-45 to 160 °C)
-49 to 320 °F
(-45 to 160 °C)
-49 to 320 °F
(-45 to 160 °C)
G(3)(4)
Glycerin and
Water
1.13
0.00034
12.5
5 to 203 °F
(-15 to 95 °C)
5 to 203 °F
(-15 to 95 °C)
5 to 203 °F
(-15 to 95 °C)
5 to 203 °F
(-15 to 95 °C)
5 to 203 °F
(-15 to 95 °C)
N(4)
Neobee
M–20
0.92
0.001008
9.8
5 to 401 °F(2)
(-15 to 205 °C)
5 to 437 °F
(-15 to 225 °C)
5 to 437 °F
(-15 to 225 °C)
5 to 437 °F
(-15 to 225 °C)
5 to 437 °F
(-15 to 225 °C)
P(3)(4)
Proylene
Glycol and
Water
1.02
0.00034
2.8
5 to 203 °F
(-15 to 95 °C)
5 to 203 °F
(-15 to 95 °C)
5 to 203 °F
(-15 to 95 °C)
5 to 203 °F
(-15 to 95 °C)
5 to 203 °F
(-15 to 95 °C)
(1) Temperature limits are reduced in vacuum service and may be limited by seal selection.
(2) Maximum process temperature is limited by heat transfer to the transmitter electronics and must be further derated if ambient temperatures exceed 70°F
(21°C).
(3) Not suitable for vacuum applications.
(4) This is a food grade fill fluid.
For more information on Fill Fluids please see technical note Rosemount 1199 Fill Fluid Specifications 00840-2100-4016.
85
Product Data Sheet
Rosemount DP Level
00813-0100-4016, Rev LA
January 2011
Figure 1. Thermal Optimizer with Silicone 704 Fill Fluid Temperature Limits
Humidity Limits
0–100% relative humidity
Turn-On Time
3051SAL_C
3051L
2051L
ERS
System:
Performance within specifications less than 2.0 seconds after power is applied to the transmitter.
Performance within specifications less than 2.0 seconds (10.0 s for Profibus protocol) after power is applied to the transmitter
Performance within specifications less than 2.0 seconds after power is applied to the transmitter.
Performance within specifications less than 6.0 seconds after power is applied.
Volumetric Displacement
Less than 0.005 in3 (0.08 cm3)
Damping(1)
Software damping is in addition to sensor module response time.
3051SAL_C Analog output response to a step change is user-selectable from 0 to 60 seconds for one time constant.
3051L
Analog output response to a step input change is user-selectable from 0 to 36 seconds for one time constant.
2051L
Analog output response to a step input change is user-selectable from 0 to 25.6 seconds for one time constant.
ERS
The PHI and PLO Pressure measurements and the DP calculation may be independently dampened from 0 – 60 seconds for
System:
one time constant.
(1) Does not apply to wireless option code X.
86
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Physical Specifications
Electrical Connections
1
/2–14 NPT, PG 13.5, G1/2, and M20 × 1.5 conduit. HART interface
connections fixed to terminal block.
Non-Wetted Parts
3051SAL
3051L
2051L
Low-copper aluminum alloy or
SST: CF-3M (Cast 316L SST)
or CF-8M (Cast 316 SST)
NEMA 4X, IP 66, IP 68 (66 ft
(20 m) for 168 hours)
Note: IP 68 not available with
Wireless Output.
SST: CF-3M (Cast 316L SST)
Low-copper aluminum or
CF-3M (Cast version of 316L
SST, material per ASTM-A743).
NEMA 4X, IP 65, IP 66
Low-copper aluminum or
CF-8M (Cast version of 316
SST). Enclosure Type 4X, IP
65, IP 66, IP 68
CF-3M (Cast version of 316L
SST, material per ASTM-A743)
CF-3M (Cast version of 316L
SST)
ASTM A449, Type 1
(zinc-cobalt plated carbon steel)
ASTM F593G, Condition CW1
(Austenitic 316 SST)
ASTM A193, Grade B7M (zinc
plated alloy steel)
Alloy K-500
ASTM A449, Type 1
(zinc-cobalt plated carbon steel)
ASTM F593G, Condition CW1
(Austenitic 316 SST)
ASTM A193, Grade B7M (zinc
plated alloy steel)
Silicone 200 or Fluorocarbon oil
(Halocarbon or Fluorinert®
FC-43 for 3051T)
Silicone 200 or Fluorocarbon oil
(Halocarbon or Fluorinert®
FC-43 for 2051T)
Syltherm XLT, Silicone 704,
Silicone 200, inert, glycerin and
water, Neobee M-20 or
propylene glycol and water
Syltherm XLT, Silicone 704,
Silicone 200, inert, glycerin and
water, Neobee M-20 or
propylene glycol and water
Paint for Aluminum Housing
Plated carbon steel per ASTM
A449, Type 1
Austenitic 316 SST per ASTM
F593
ASTM A453, Class D, Grade
660 SST
ASTM A193, Grade B7M alloy
steel
ASTM A193, Class 2, Grade
B8M SST
Alloy K-500
Silicone or inert halocarbon
(Inert is not available with
3051S_CA). In-Line series uses
Fluorinert® FC-43.
Syltherm XLT, Silicone 704,
Silicone 200, inert, glycerin and
water,
Neobee M-20, propylene glycol
and water.
Polyurethane
Polyurethane
Polyurethane
Cover O-ring
Nitrile butadiene (NBR)
Nitrile butadiene (NBR)
Nitrile butadiene (NBR)
Wireless Antenna
PBT/ polycarbonate (PC)
integrated omnidirectional
antenna
Field replaceable, keyed
connection eliminates the risk of
incorrect installation,
Intrinsically Safe Lithium-thionyl
chloride Power Module with
PBT enclosure
N/A
N/A
N/A
N/A
Electrical Housing
Coplanar Sensor Module
Housing
Bolts
Sensor Module Fill Fluid
Process Fill Fluid
Power Module
Capillary Armor is SST.
87
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
NOTE
If a lower housing is supplied, then the following
gaskets are the default gaskets for each seal.
Wetted Materials
Seal
Gaskets
FFW
FCW
FUW
FVW
RCW
RFW
FTW
PFW
PCW
ThermoTork TN-9000 gasket
No gasket is supplied
No gasket is supplied
No gasket is supplied
C-4401 gasket
C-4401 gasket
C-4401 gasket
ThermoTork TN-9000 gasket
No gasket is supplied
Shipping Weights
Table 45. 3051SAL Weights Without SuperModule Platform, Housing, or Transmitter Options
Flange
2-in., 150
3-in., 150
4-in., 150
2-in., 300
3-in., 300
4-in., 300
2-in., 600
3-in., 600
DN 50 / PN 40
DN 80 / PN 40
DN 100 / PN 10/16
DN 100 / PN 40
Flush
lb. (kg)
9.5 (4,3)
15.7 (7,1)
21.2 (9,6)
11.3 (5,1)
19.6 (8,9)
30.4 (13.8)
12.8 (5,8)
22.1 (10,0)
11.3 (5,1)
16.0 (7,3)
11.2 (5,1)
12.6 (5,7)
2-in. Ext.
lb (kg)
—
16.4 (7,4)
20.9 (9,5)
—
20.3 (9,2)
30.3 (13,7)
—
22.8 (10,3)
—
16.7 (7,6)
11.9 (5,4)
13.3 (6,0)
4-in. Ext.
lb (kg)
—
17.6 (8,0)
22.1 (10,0)
—
21.5 (9,8)
31.5 (14,3)
—
24.0 (10,9)
—
17.9 (8,1)
13.1 (5,9)
14.5 (6,6)
6-in. Ext.
lb (kg)
—
18.9 (8,6)
23.4 (10,6)
—
22.8 (10,3)
32.8 (14,9)
—
25.3 (11,5)
—
19.2 (8,7)
14.4 (6,5)
15.8 (7,1)
Table 46. 3051SAM and 3051SAL Transmitter Option Weights
Option Code
1J, 1K, 1L
2J
7J
2A, 2B, 2C
1A, 1B, 1C
M5
Option
SST PlantWeb Housing
SST Junction Box Housing
SST Quick Connect
Aluminum Junction Box Housing
Aluminum PlantWeb Housing
LCD Display for Aluminum PlantWeb Housing(1),
LCD Display for SST PlantWeb Housing(1)
Aluminum Standard Cover
SST Standard Cover
Aluminum Display Cover
SST Display Cover
Wireless Extended Cover
LCD Display(2)
Junction Box Terminal Block
PlantWeb Terminal Block
Power Module
(1) Includes LCD display and display cover.
(2) Display only.
88
Add lb (kg)
3.5 (1,6)
3.4 (1,5)
0.4 (0,2)
1.1 (0,5)
1.1 (0,5)
0.8 (0,4)
1.6 (0,7)
0.4 (0,2)
1.3 (0,6)
0.7 (0,3)
1.5 (0,7)
0.7 (0,3)
0.1 (0,04)
0.2 (0,1)
0.2 (0,1)
0.5 (0,2)
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
SEAL SPECIFICATIONS
Table 47. 3051L Weights without Options
Flange
2-in., 150
3-in., 150
4-in., 150
2-in., 300
3-in., 300
4-in., 300
2-in., 600
3-in., 600
DN 50/PN 40
DN 80/PN 40
DN 100/
PN 10/16
DN 100/
PN 40
2-in. Ext.
lb (kg)
4-in. Ext.
lb (kg)
6-in. Ext.
lb (kg)
12.5 (5,7)
17.5 (7,9)
23.5 (10,7)
17.5 (7,9)
22.5 (10,2)
32.5 (14,7)
15.3 (6,9)
25.2 (11,4)
13.8 (6,2)
19.5 (8,8)
17.8 (8,1)
—
19.5 (8,8)
26.5 (12,0)
—
24.5 (11,1)
35.5 (16,1)
—
27.2 (12,3)
—
21.5 (9,7)
19.8 (9,0)
—
20.5 (9,3)
28.5 (12,9)
—
25.5 (11,6)
37.5 (17,0)
—
28.2 (12,8)
—
22.5 (10,2)
20.8 (9,5)
—
21.5 (9,7)
30.5 (13,8)
—
26.5 (12,0)
39.5 (17,9)
—
29.2 (13,2)
—
23.5 (10,6)
21.8 (9,9)
Hygienic Seal Approvals
23.2 (10,5)
25.2 (11,5)
26.2 (11,9)
27.2 (12,3)
Hygienic O-rings: The EPDM, Flourocarbon (FMK), and Nitrile
butadiene (NBR) O-rings for the SSW Tank Spud Seal meet 3-A
Hygienic Standard Number 18 Class 1 requirements. The EPDM
O-ring also meets USP class VI approval requirements.
Table 48. 3051L Transmitter Options Weights
Code
J, K, L, M
J, K, L, M
M5
M6
Stainless Steel Housing (T)
Stainless Steel Housing (C, L, H, P)
LCD display for Aluminum Housing
LCD display for SST Housing
3.9 (1,8)
3.1 (1,4)
0.5 (0,2)
1.25 (0,6)
J, K, L, M
M5
When ordering the Q16 option in the pressure transmitter model
number, the surface finish of the seal diaphragm is certified per
BPE 2002 requirements. This surface finish certification is
available for Tri-Clamp, Tri-Clamp Inline, Tank Spud, and Thin Wall
Tank Spud seal types.
NACE Standard (T Option)
Flush
lb. (kg)
2-in. Ext.
lb (kg)
4-in. Ext.
lb (kg)
6-in. Ext.
lb (kg)
12.5 (5,7)
17.5 (7,9)
23.5 (10,7)
17.5 (7,9)
22.5 (10,2)
32.5 (14,7)
13.8 (6,2)
19.5 (8,8)
17.8 (8,1)
—
19.5 (8,8)
26.5 (12,0)
—
24.5 (11,1)
35.5 (16,1)
—
21.5 (9,7)
19.8 (9,0)
—
20.5 (9,3)
28.5 (12,9)
—
25.5 (11,6)
37.5 (17,0)
—
22.5 (10,2)
20.8 (9,5)
—
21.5 (9,7)
30.5 (13,8)
—
26.5 (12,0)
39.5 (17,9)
—
23.5 (10,6)
21.8 (9,9)
23.2 (10,5)
25.2 (11,5)
26.2 (11,9)
27.2 (12,3)
Material Traceability (Q8 Option)
Table 50. 2051L Transmitter Options Weights
Code
Hygienic Fill Fluids: The hygienic fill fluids glycerin & water and
Propylene Glycol & water meet United States Pharmacopeia
(USP) and Food Chemical Codex (FCC) requirements and is
Generally Recognized as Safe (GRAS) in accordance with the
FDA Code of Federal Regulations Title 21. The hygienic fill fluid
Neobee M-20 is approved under 21CFR 172.856 as a direct food
additive and under 21 CFR 174.5 as an indirect food additive.
NACE (National Association of Corrosion Engineers) standard
MR0175/ISO 15156 defines metallic material requirements for
resistance to sulfide stress cracking when applied on petroleum
production, drilling, gathering and flow line equipment, and field
processing facilities to be used in H2S bearing hydrocarbon
service. MR0103 provides material requirements exclusive to sour
petroleum refining environments. Compliance guidelines are
intended to include “wetted” materials as recommended by both
NACE standards. The option code T in several of the general
purpose seal types limits the wetted material offering.
Metallurgical requirements for alloys used are virtually identical for
the two standards, but application conditions enforced are different
and can limit material acceptance. Contact an Emerson Process
Management representative to aid in selecting the proper
materials to meet the NACE standard.
Table 49. 2051L Weights without Options
2-in., 150
3-in., 150
4-in., 150
2-in., 300
3-in., 300
4-in., 300
DN 50/PN 40
DN 80/PN 40
DN 100/
PN 10/16
DN 100/
PN 40
Hygienic Seals: Tri-Clamp, tank spud, thin wall tank spud,
Tri-Clamp inline, and Cherry Burrell “I” line seal conform to 3-A
Hygienic Standards for Sensor and Sensor Fittings and
Connections used on Milk and Milk Product Equipment, Number
74-03.
Surface Finish Certification (Q16 Option)
Add
lb (kg)
Option
Flange
Functional Specifications
Flush
lb. (kg)
Option
Stainless Steel Housing
LCD display for Aluminum Housing
Add
lb (kg)
Material traceability is provided for the seal, upper housing, and if
applicable, lower housing/flushing connection or diaphragm
extension, upon selecting the option code Q8 in the pressure
transmitter model number. Material traceability for the
transmitter/seal system is provided per the DIN EN10204 3.1
standard, and is only available for general purpose seal types.
3.9 (1,8)
0.5 (0,2)
89
Product Data Sheet
Rosemount DP Level
Performance Specifications
Instrument Toolkit calculates the remote seal system performance
and validates model number configuration.
Remote Seal System Performance Calculation
Report (QZ Option)
When the QZ option code is specified within the pressure
transmitter model structure, Emerson will generate a remote seal
system calculation report for the given application. This report
quantifies all aspects of remote seal system performance including
seal temperature effects, head temperature effects, seal response
time, and transmitter total probable error.
Physical Specifications
Material of Construction
Remote seal materials of construction (diaphragm, upper housing,
flange, lower housing/flushing connection, bolts, and
gaskets/O-rings) are listed for each remote seal type. Fill fluids
specifications are listed in Table 44.
Tagging
The 1199 remote seal model number is marked on the transmitter
nameplate (neck or top label). The pressure transmitter will be
tagged in accordance with customer requirements. The standard
stainless steel tag is wired to the transmitter. Tag is 0.02-in. (0.051
cm) thick with 0.125-in. (0.318 cm) high letters. A permanently
attached tag is available upon request.
Calibration
Transmitters are factory calibrated to customer’s specified range.
If calibration is not specified, then the transmitters are calibrated at
maximum range. Calibration is performed at ambient temperature
and pressure.
Custom Configurations
Rosemount 3051S, 3051, and 2051 (Option
Code C1)
If code C1 is ordered, the customer may specify the following
data in addition to the standard configuration parameters.
Refer to the respective configuration data sheet within the
device PDS.
Descriptor: 16 alphanumeric characters.
Message: 32 alphanumeric characters.
Date: Day, month, year.
Damping: Sec.
90
00813-0100-4016, Rev LA
January 2011
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Rosemount 3051S Liquid Level Certifications
Approved Manufacturing Locations
Rosemount Inc. — Chanhassen, Minnesota USA
Emerson Process Management GmbH & Co. — Wessling,
Germany
Emerson Process Management Asia Pacific Private Limited —
Singapore
Beijing Rosemount Far East Instrument Co., LTD — Beijing, China
Emerson Process Management LTDA — Sorocaba, Brazil
Emerson Process Management (India) Pvt. Ltd. — Mumbai, India
Emerson Process Management, Emerson FZE — Dubai, United
Arab Emirates
Ordinary Location Certification for FM
As standard, the transmitter has been examined and tested to
determine that the design meets basic electrical, mechanical, and
fire protection requirements by FM, a nationally recognized testing
laboratory (NRTL) as accredited by the Federal Occupational
Safety and Health Administration (OSHA).
European Directive Information
The EC declaration of conformity for all applicable European
directives for this product can be found at www.rosemount.com. A
hard copy may be obtained by contacting an Emerson Process
Management representative.
HART & FOUNDATION Fieldbus
Hazardous Locations Certifications
North American Certifications
FM Approvals
E5
I5/IE Intrinsically Safe for use in Class I, Division 1, Groups A, B,
C, and D, T4 (Ta = 70 °C for output options A or X; Ta = 60
°C for output option F); Class II, Division 1, Groups E, F, and
G; Class III, Division 1; Class I, Zone 0 AEx ia IIC T4 (Ta =
70 °C for output options A or X; Ta = 60 °C for output option
F) when connected in accordance with Rosemount drawing
03151-1006; Non-Incendive for Class I, Division 2, Groups
A, B, C, and D; T4 (Ta = 70 °C for output options A or X;
Ta = 60 °C for output option F) Enclosure Type 4X
For entity parameters see control drawing 03151-1006.
Canadian Standards Association (CSA)
All CSA hazardous approved transmitters are certified per
ANSI/ISA 12.27.01-2003.
ATEX Directive (94/9/EC)
Emerson Process Management complies with the
ATEX Directive.
European Pressure Equipment Directive (PED) (97/23/EC)
Models 3051S_CA4; 3051S_CD2, 3, 4, 5; (also with P9 option)
Pressure Transmitters — QS Certificate of Assessment EC No. 59552-2009-CE-HOU-DNV, Module H Conformity
Assessment
All other Model 3051S Pressure Transmitters
— Sound Engineering Practice
Transmitter Attachments: Diaphragm Seal - Process Flange Manifold — Sound Engineering Practice
Explosion-proof for Class I, Division 1, Groups B, C, and D,
T5 (Ta = 85 °C); Dust Ignition-proof for Class II and Class III,
Division 1, Groups E, F, and G, T5 (Ta = 85 °C); hazardous
locations; enclosure Type 4X, conduit seal not required
when installed according to Rosemount drawing
03151-1003.
E6
Explosion-proof for Class I, Division 1, Groups B, C, and D;
Dust Ignition-proof for Class II and Class III, Division 1,
Groups E, F, and G; suitable for Class I, Division 2, Groups
A, B, C, and D, when installed per Rosemount drawing
03151-1013, CSA Enclosure Type 4X; conduit seal not
required; Dual Seal.
I6/IF Intrinsically Safe for Class I, Division 1, Groups A, B, C, and
D when connected in accordance with Rosemount drawings
03151-1016; Dual Seal.
For entity parameters see control drawing 03151-1016.
Primary Elements, Flowmeter
— See appropriate Primary Element QIG
Electro Magnetic Compatibility (EMC) (2004/108/EC)
EN 61326-1:2006
EN 61326-2-3:2006
91
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
European Certifications
ND
I1/IA ATEX Intrinsic Safety
Certificate No.: BAS01ATEX1303X
II 1G
Ex ia IIC T4 (Ta = -60 °C to 70 °C) -HART/Remote
Display/Quick Connect/HART Diagnostics
Ex ia IIC T4 (Ta = -60 °C to 70 °C) -FOUNDATION fieldbus
Ex ia IIC T4 (Ta = -60 °C to 40 °C) -FISCO
1180
Special conditions for safe use (x)
1. Cable entries must be used which maintain the ingress
protection of the enclosure to at least IP66.
2. Unused cable entries must be filled with suitable blanking
plugs which maintain the ingress protection of the
enclosure to at least IP66.
3. Cable entries and blanking plugs must be suitable for the
ambient range of the apparatus and capable of
withstanding a 7J impact test.
4. The 3051S SuperModule must be securely screwed in
place to maintain the ingress protection of the enclosure.
(The 3051S SuperModule must be properly assembled to
the 3051S housing to maintain ingress protection.)
Input Parameters
Loop /
Power
Groups
HART / FOUNDATION fieldbus/ Remote Display /
Quick Connect / HART Diagnostics
Ui = 17.5 V
FISCO
Ii = 300 mA
HART / FOUNDATION fieldbus/ Remote Display /
Quick Connect / HART Diagnostics
Ii = 380 mA
FISCO
Pi = 1.0 W
HART / Remote Display / Quick Connect /
HART Diagnostics
Pi = 1.3 W
FOUNDATION fieldbus
Pi = 5.32 W FISCO
Ci = 30 nF
SuperModule Platform
Ci = 11.4 nF HART / HART Diagnostics / Quick Connect
Ci = 0
FOUNDATION fieldbus / Remote Display / FISCO
Li = 0
HART / FOUNDATION fieldbus/ FISCO / Quick
Connect / HART Diagnostics
Li = 60 µH
Remote Display
RTD Assembly (3051SFx Option T or R)
Ui = 30 V
E1
2. The terminal pins of the Types 3051 S-T and 3051 S-C
must be protected to IP20 minimum.
N1
ATEX Type n
Certificate No.: BAS01ATEX3304X
II 3 G
Ex nL IIC T4 (Ta = -40 °C TO 70 °C)
Ui = 45 Vdc max
Ci = 11.4 nF (Transmitter Output Option A)
Ci = 0 (Transmitter Output Option F)
Li = 0
For remote display, Ci = 0, Li = 60 μH
IP66
Special conditions for safe use (x)
The apparatus is not capable of withstanding the 500 V
insulation test required by Clause 6.8.1 of EN 60079-15.
This must be taken into account when installing the apparatus.
NOTE
RTD Assembly is not included with the 3051SFx Type n Approval.
ATEX Flameproof
Certificate No.: KEMA00ATEX2143X
Ex d IIC T6 (-50 °C  Tamb  65 °C)
Ex d IIC T5 (-50 °C  Tamb  80 °C)
Vmax = 42.4 V
1180
1. The Ex d blanking elements, cable glands, and wiring
shall be suitable for a temperature of 90 °C.
2. The 3051S SuperModule contains a thin wall diaphragm.
Installation, maintenance and use shall take into account
the environmental conditions to which the diaphragm will
be subjected. The manufacturer's instructions for
maintenance shall be followed in detail to assure safety
during its expected lifetime.
3. In case of repair, contact the manufacturer for information
on the dimensions of the flameproof joints.
Japanese Certifications
E4
TIIS Flameproof
Ex d IIC T6
Certificate
Description
TC15682
TC15683
TC15684
Coplanar with Junction Box Housing
Coplanar with PlantWeb Housing
Coplanar with PlantWeb Housing
and LCD Display
In-Line SST with Junction Box Housing
In-Line Alloy C-276 with Junction Box Housing
In-Line SST with PlantWeb Housing
In-Line Alloy C-276 with PlantWeb Housing
In-Line SST with PlantWeb Housing
and LCD Display
In-Line Alloy C-276 with PlantWeb Housing
and LCD Display
Remote Display
3051SFA/C/P SST/Alloy C-276 with
PlantWeb Housing and LCD Display
3051SFA/C/P SST/Alloy C-276 with
PlantWeb Housing and Remote Display
3051SFA/C/P SST/Alloy C-276 with
Junction Box Housing
TC15685
TC15686
TC15687
TC15688
TC15689
TC15690
TC17102
TC17099
TC17100
TC17101
92
II 1/2 G
Special conditions for safe use (x)
Ui = 5 Vdc
Ii = 500 mA
Pi = 0.63 W
Special conditions for safe use (x)
1. The apparatus, excluding the Types 3051 S-T and 3051
S-C (In-line and Coplanar SuperModule Platforms
respectively), is not capable of withstanding the 500 V test
as defined in Clause 6.4.12 of EN 60079-11. This must be
considered during installation.
ATEX Dust
Certificate No.: BAS01ATEX1374X
II 1 D
Ex tD A20 IP66 T105°C (-20 °C  Tamb  85 °C)
Vmax = 42.4 volts max
IP66
1180
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
China Certifications
E3
China Flameproof, Dust Ignition-proof
NEPSI Certificate No. (manufactured in Chanhassen, MN):
GYJ091035
Certificate No. (manufactured in Beijing, China): GYJ06366
Certificate No. (manufactured in Singapore): GYJ06364
Certificate No. (3051SFx RTC, BMMC, SMMC): GYJ071086
Ex d IIB+H2 T3~T5
DIP A21 TA T3~T5 IP66
NOTE
Refer to Appendix B of the 3051S Reference Manual (document
number 00809-0100-4801) for Special Conditions for Safe Use.
I3
China Intrinsic Safety, Dust Ignition-proof
NEPSI Certificate No. (manufactured in Chanhassen, MN):
GYJ081078
Certificate No. (manufactured in Beijing, China): GYJ06367
Certificate No. (manufactured in Singapore): GYJ06365
Certificate No. (3051SFx RTC, BMMC, SMMC): GYJ071293
Ex ia IIC T4
DIP A21 TA T4 IP66
Rosemount DP Level
N3
Loop /
Power
Transmitter Output
Ui = 30 V
Ii = 300 mA
Pi = 1.0 W
Pi = 1.3 W
Ci = 11.4 nF
Ci = 0 nF
Li = 0 µH
HART / FOUNDATION fieldbus
HART / FOUNDATION fieldbus
HART
FOUNDATION fieldbus
HART
FOUNDATION fieldbus
HART(1) / FOUNDATION fieldbus
(1) For remote meter option (M7, M8, M9), Li = 60 µH.
NOTE
Refer to Appendix B of the 3051S Reference Manual (document
number 00809-0100-4801) for Special Conditions for Safe Use.
Brazil Certifications
I2
Special conditions for safe use (x)
Input Parameters
The apparatus, excluding the Types 3051S-T and 3051S-C
(In-line and Coplanar SuperModule Platforms respectively),
is not capable of withstanding the 500 V test as defined in
Clause 6.4.12 of IEC60079-11. This must be considered
during installation.
Groups
HART / FOUNDATION fieldbus / Remote Display /
Quick Connect / HART Diagnostics
Ii = 300 mA
HART / FOUNDATION fieldbus / Remote Display /
Quick Connect / HART Diagnostics
Pi = 1.0 W
HART / Remote Display / Quick Connect /
HART Diagnostics
Pi = 1.3 W
FOUNDATION fieldbus
Ci = 38 nF
SuperModule Platform
Ci = 11.4 nF HART / HART Diagnostics / Quick Connect
Ci = 0
FOUNDATION fieldbus / Remote Display
Li = 0
SuperModule Platform / FOUNDATION fieldbus
Li = 2.4 µH
HART / Quick Connect / HART Diagnostics
Li = 58.2 µH Remote Display
RTD Assembly (3051SFx Option T or R)
Ui = 30 V
Ui = 5 Vdc
Ii = 500 mA
Pi = 0.63 W
INMETRO Intrinsic Safety
Certificate number: CEPEL-EX-0722/05X
(manufacturing in Chanhassen, MN and Singapore)
Certificate number: CEPEL-EX-1414/07X
(manufacturing in Brazil)
INMETRO Marking: BR-Ex ia IIC T4 IP66W
NOTE
Refer to Appendix B of the 3051S Reference Manual (document
number 00809-0100-4801) for Special Conditions for Safe Use.
Loop /
Power
China Type n - Energy Limited
NEPSI Certificate No.: GYJ101112X
Ex nL IIC T5 (-40 °C ≤ Ta ≤ 70 °C)
IP66
E2
INMETRO Flameproof
Certificate number: CEPEL-EX-140/2003X
(manufacturing in Chanhassen, MN and Singapore)
Certificate number: CEPEL-EX-1413/07X
(manufacturing in Brazil)
INMETRO Marking: BR-Ex d IIC T5/T6 IP66W
Special conditions for safe use (x)
1. This device contains a thin wall diaphragm. Installation,
maintenance, and use shall take into account the
environmental conditions to which the diaphragm will be
subjected. The manufacturer’s instructions for installation
and maintenance shall be followed in detail to assure
safety during its expected lifetime.
2. For ambient temperature above 60 ºC, cable wiring must
have minimum isolation temperature of 90 ºC, to be in
accordance to equipment operation temperature.
3. The accessory of cable entries or conduit must be
certified as flameproof and needs to be suitable for use
conditions.
4. Where electrical entry is via conduit, the required sealing
device must be assembled immediately close to
enclosure.
93
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
IECEx Certifications
E7
IECEx Flameproof and Dust (each listed separately)
IECEx Flameproof
Certificate No.: IECExKEM08.0010X
Ex d IIC T5 or T6 Ga/Gb
T6 (-50 °C  Tamb  65 °C)
T5 (-50 °C  Tamb  80 °C)
Vmax = 42.4 V
Special conditions for safe use (x)
1. The Ex d blanking elements, cable glands, and wiring
shall be suitable for a temperature of 90 °C.
2. The 3051S SuperModule contains a thin wall diaphragm.
Installation, maintenance, and use shall take into account
the environmental conditions to which the diaphragm will
be subjected. The manufacturer's instructions for
maintenance shall be followed in detail to assure safety
during its expected lifetime.
3. In case of repair, contact the manufacturer for information
on the dimensions of the flameproof joints.
IECEx Dust
Certificate No. IECExBAS09.0014X
Ex tD A20 IP66 T105 °C (-20 °C ≤ Ta ≤ 85 °C)
Vmax = 42.4 V
A = 22 mA
IP66
Special conditions for safe use (x)
1. Cable entries must be used which maintain the ingress
protection of the enclosure to at least IP66.
2. Unused cable entries must be filled with suitable blanking
plugs which maintain the ingress protection of the
enclosure to at least IP66.
3. Cable entries and blanking plugs must be suitable for the
ambient range of the apparatus and capable of
withstanding a 7J impact test.
4. The 3051S SuperModule must be securely screwed in
place to maintain the ingress protection of the enclosure.
(The 3051S SuperModule must be properly assembled to
the 3051S housing to maintain ingress protection.)
I7/IG IECEx Intrinsic Safety
Certificate No.: IECExBAS04.0017X
Ex ia IIC T4 (Ta = -60 °C to 70 °C) -HART/Remote
Display/Quick Connect/HART Diagnostics
Ex ia IIC T4 (Ta = -60 °C to 70 °C) -FOUNDATION fieldbus
Ex ia IIC T4 (Ta = -60 °C to 40 °C) -FISCO
IP66
94
Input Parameters
Loop / Power
Groups
Ui = 30 V
HART / FOUNDATION fieldbus/ Remote
Display / Quick Connect / HART
Diagnostics
Ui = 17.5 V
FISCO
Ii = 300 mA
HART / FOUNDATION fieldbus/ Remote
Display / Quick Connect / HART
Diagnostics
Ii = 380 mA
FISCO
Pi = 1.0 W
HART / Remote Display / Quick
Connect / HART Diagnostics
Pi = 1.3 W
FOUNDATION fieldbus
Pi = 5.32 W
FISCO
Ci = 30 nF
SuperModule Platform
Ci = 11.4 nF
HART / HART Diagnostics / Quick
Connect
Ci = 0
FOUNDATION fieldbus / Remote Display /
FISCO
Li = 0
HART / FOUNDATION fieldbus/ FISCO /
Quick Connect / HART Diagnostics
Li = 60 H
Remote Display
RTD Assembly (3051SFx Option T or R)
Ui = 5 Vdc
Ii = 500 mA
Pi = 0.63 W
Special conditions for safe use (x)
1. The 3051S HART 4-20 mA, 3051S FOUNDATION fieldbus,
and 3051S FISCO are not capable of withstanding the 500
V test as defined in clause 6.4.12 of IEC 60079-11. This
must be taken into account during installation.
2. The terminal pins of the Types 3051S-T and 3051S-C must
be protected to IP20 minimum.
N7
IECEx Type n
Certificate No.: IECExBAS04.0018X
Ex nC IIC T4 (-40 °C ≤ Ta ≤ +70 °C)
IP66
Special conditions for safe use (x)
The apparatus is not capable of withstanding the 500 V
insulation test required by Clause 8 of IEC 60079-15:1987.
Combinations of Certifications
Stainless steel certification tag is provided when optional approval
is specified. Once a device labeled with multiple approval types is
installed, it should not be reinstalled using any other approval
types. Permanently mark the approval label to distinguish it from
unused approval types.
K1
Combination of E1, I1, N1, and ND
K2
Combination of E2 and I2
K5
Combination of E5 and I5
K6
Combination of E6 and I6
K7
Combination of E7, I7, and N7
KA
Combination of E1, I1, E6, and I6
KB
Combination of E5, I5, I6, and E6
KC
Combination of E5, E1, I5, and I1
KD
Combination of E5, I5, E6, I6, E1, and I1
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
3051S ERS System Certifications
Approved Manufacturing Locations
European Certifications
Rosemount Inc. – Chanhassen, Minnesota, USA
Emerson Process Management GmbH & Co. – Wessling,
Germany
Emerson Process Management Asia Pacific Private Limited –
Singapore
Beijing Rosemount Far East Instrument Co., LTD – Beijing, China
I1
N1
ND
Ordinary Location Certification for FM
Approvals
As standard, the transmitter has been examined and tested to
determine that the design meets basic electrical, mechanical, and
fire protection requirements by FM, a nationally recognized testing
laboratory (NRTL) as accredited by the Federal Occupational
Safety and Health Administration (OSHA).
Consult your Emerson Process Management sales representative
for more information about the EC declaration of conformity.
Hazardous Locations Certifications
North American Certifications
E1
I6
Explosion-proof for Class I, Division 1, Groups B, C, and D;
Dust Ignition-Proof for Class II and Class III, Division 1,
Groups E, F, and G; suitable for Class I, Division 2, Groups
A, B, C, and D, CSA Enclosure Type 4X; conduit seal not
required; Dual Seal.
Intrinsically Safe for Class I, Division 1, Groups A, B, C, and
D when connected in accordance with Rosemount Drawings
03151-1316; Dual Seal.
For entity parameters see control drawing 03151-1316.
ATEX Flameproof
Certificate No.: KEMA00ATEX2143X
Ex d IIC T6 (-50 °C  Tamb  65 °C)
Ex d IIC T5 (-50 °C  Tamb  80 °C)
Vmax = 42.4 V
1180
Special Conditions for safe use (X):
II 1/2 G
1. The Ex d blanking elements, cable glands and wiring
shall be suitable for a temperature of 90 °C.
2. Transmitter Model 3051S contains a thin wall diaphragm.
Installation, maintenance, and use shall take into account
the environmental conditions to which the diaphragm will
be subjected. The manufacturer's instructions for
maintenance shall be followed in detail to assure safety
during its expected lifetime.
Canadian Standards Association (CSA)
All CSA hazardous approved transmitters are certified per
ANSI/ISA 12.27.01-2003.
E6
ATEX Dust
Certificate No.: BAS01ATEX1374X
II 1 D
Ex tD A20 IP66 T105 °C (-20 °C  Tamb  85 °C)
Vmax = 42.4 V max
IP66
1180
Special Conditions for safe use (X):
1. Cable entries must be used which maintain the ingress
protection of the enclosure to at least IP66.
2. Unused cable entries must be filled suitable blanking
plugs which maintain the ingress protection of the
enclosure to at least IP66.
3. Cable entries and blanking plugs must be suitable for the
ambient range of the apparatus and capable of
withstanding a 7J impact test.
4. Each 3051S ERS transmitter must be securely screwed
in place to maintain the ingress protection of the
enclosure. (The 3051S Super Module must be properly
assembled to the 3051S housing to maintain ingress
protection.)
European Directive Information
FM Approvals
E5 Explosion-proof for Class I, Division 1, Groups B, C, and D;
Dust Ignition-proof for Class II and Class III, Division 1,
Groups E, F, and G; hazardous locations; enclosure Type
4X, conduit seal not required.
I5
Intrinsically Safe for use in Class I, Division 1, Groups A, B,
C, and D; Class II, Division 1, Groups E, F, and G; Class III,
Division 1; Class I, Zone 0 AEx ia IIC when connected in
accordance with Rosemount drawing 03151-1306;
Non-Incendive for Class I, Division 2, Groups A, B, C, and D
Enclosure Type 4X
For entity parameters see control drawing 03151-1306.
ATEX Intrinsic Safety
Consult factory for availability.
ATEX Type n
Consult factory for availability.
3. In case of repair, contact the manufacturer for information
on the dimensions of the flameproof joints.
Japanese Certifications
E4
TIIS Flameproof: Consult factory for availability
INMETRO Certifications
E2
INMETRO Flameproof: Consult factory for availability
I2
INMETRO Intrinsic Safety: Consult factory for availability
China Certifications
E3
China Flameproof: Consult factory for availability
I3
China Intrinsically Safe: Consult factory for availability
95
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
IECEx Certifications
I7
IECEx Intrinsic Safety
Consult factory for availability.
N7
IECEx Type n
Consult factory for availability.
E7
IECEx Flameproof and Dust (each listed separately)
IECEx Flameproof
Certificate No.: IECExKEM08.0010X
Ex d IIC T6 (-50 °C  Tamb  65 °C)
Ex d IIC T5 (-50 °C  Tamb  80 °C)
Vmax = 42.4 V
Special conditions for safe use (X)
1. The Ex d blanking elements, cable glands and wiring
shall be suitable for a temperature of 90 °C.
2. Transmitter Model 3051S contains a thin wall diaphragm.
Installation, maintenance, and use shall take into account
the environmental conditions to which the diaphragm will
be subjected. The manufacturer's instructions for
maintenance shall be followed in detail to assure safety
during its expected lifetime.
3. In case of repair, contact the manufacturer for information
on the dimensions of the flameproof joints.
IECEx Dust
Certificate No. IECExBAS09.0014X
Ex tD A20 IP66 T105°C (-20 °C ≤ Tamb ≤ 85 °C)
Vmax = 42.4 V
A = 22 mA
IP66
Special conditions for safe use (x)
1. Cable entries must be used which maintain the ingress
protection of the enclosure to at least IP66.
2. Unused cable entries must be filled with suitable blanking
plugs which maintain the ingress protection of the
enclosure to at least IP66.
3. Cable entries and blanking plugs must be suitable for the
ambient range of the apparatus and capable of
withstanding a 7J impact test.
4. Each 3051S ERS sensor must be securely screwed in
place to maintain the ingress protection of the enclosure.
(Each sensor module must be properly assembled to the
housing to maintain ingress protection.)
96
Combinations of Certifications
Stainless steel certification tag is provided when optional approval
is specified. Once a device labeled with multiple approval types is
installed, it should not be reinstalled using any other approval
types. Permanently mark the approval label to distinguish it from
unused approval types.
K1
K2
K5
K6
K7
KA
KB
KC
KD
Combination of E1, I1, N1, and ND
Combination of E2 and I2
Combination of E5 and I5
Combination of E6 and I6
Combination of E7, I7, and N7
Combination of E1, E6, I1, and I6
Combination of E5, E6, I1, and I6
Combination of E5, E1, I5, and I1
Combination of E5, E6, E1, I5, I6, and I1
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
3051L Product Certifications
Approved Manufacturing Locations
Rosemount Inc. — Chanhassen, Minnesota USA
Emerson Process Management GmbH & Co. — Wessling,
Germany
Emerson Process Management Asia Pacific
Private Limited — Singapore
Beijing Rosemount Far East Instrument Co., LTD — Beijing, China
European Directive Information
The EC declaration of conformity for all applicable European
directives for this product can be found on the Rosemount website
at www.rosemount.com. A hard copy may be obtained by
contacting an Emerson Process Management representative.
3051L HART PROTOCOL
Hazardous Locations Certifications
North American Certifications
FM Approvals
E5
Explosion-Proof for Class I, Division 1, Groups B, C, and D.
Dust-Ignition-Proof for Class II, Division 1, Groups E, F, and
G. Dust-Ignition-Proof for Class III, Division 1.
Factory Sealed, Enclosure Type 4X
I5
Intrinsically Safe for use in Class I, Division 1, Groups A, B,
C, and D; Class II, Division 1, Groups E, F, and G; Class III,
Division 1 when connected per Rosemount drawing
03031-1019; Non-incendive for Class I, Division 2, Groups
A, B, C, and D.
Temperature Code:T4 (Ta = 40 °C), T3 (Ta = 85 °C),
Enclosure Type 4X
For input parameters see control drawing 03031-1019.
ATEX Directive (94/9/EC)
All 3051 transmitters comply with the ATEX Directive.
European Pressure Equipment Directive (PED) (97/23/EC)
3051CA4; 3051CG2, 3, 4, 5; 3051CD2, 3, 4, 5
(also with P9 option); 3051HD2, 3, 4, 5; 3051HG2, 3, 4, 5;
3051PD2, 3; and 3051PG2, 3, 4, 5 Pressure Transmitters
— QS Certificate of Assessment EC No. 59552-2009-CE-HOU-DNV
Module H Conformity Assessment
All other 3051/3001 Pressure Transmitters
Canadian Standards Association (CSA)
All CSA hazardous approved transmitters are certified per
ANSI/ISA 12.27.01-2003.
E6
Explosion-Proof for Class I, Division 1, Groups B, C, and D.
Dust-Ignition-Proof for Class II and Class III, Division 1,
Groups E, F, and G. Suitable for Class I, Division 2 Groups
A, B, C, and D for indoor and outdoor hazardous locations.
Enclosure type 4X, factory sealed
C6
Explosion-Proof and intrinsically safe approval. Intrinsically
safe for Class I, Division 1, Groups A, B, C, and D when
connected in accordance with Rosemount drawings
03031-1024. Temperature Code T3C.
Explosion-Proof for Class I, Division 1, Groups B, C, and D.
Dust-Ignition-Proof for Class II and Class III, Division 1,
Groups E, F, and G. Suitable for Class I, Division 2 Groups
A, B, C, and D hazardous locations. Enclosure type 4X,
factory sealed
For input parameters see control drawing 03031-1024.
— Sound Engineering Practice
Transmitter Attachments: Diaphragm Seal - Process
Flange - Manifold
— Sound Engineering Practice
Electro Magnetic Compatibility (EMC) (2004/108/EC)
All 3051 Pressure Transmitters meet all of the requirements of
EN61326-1:2006 EN61326-2-3: 2006 and NAMUR NE-21
Ordinary Location Certification for Factory Mutual
As standard, the transmitter has been examined and tested to
determine that the design meets basic electrical, mechanical,
and fire protection requirements by FM, a nationally recognized
testing laboratory (NRTL) as accredited by the Federal
Occupational Safety and Health Administration (OSHA).
European Certifications
I1
ATEX Intrinsic Safety and Dust
Certification No.: BAS 97ATEX1089X
II 1 GD
Ex ia IIC T4 (–60  Ta  +70 °C)
Dust Rating: Ex tD A20 T80 °C (–20  Ta  40 °C) IP66
1180
Table 51. Input Parameters
Ui = 30 V
Ii = 200 mA
Pi = 0.9 W
Ci = 0.012 µF
Table 52. RTD Assembly (3051CFx Option T or R)
Ui = 5 Vdc
Ii = 500 mA
Pi = 0.63 W
97
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Special Conditions for Safe Use (X):
When the optional transient protection terminal block is
installed, the apparatus is not capable of withstanding the
500 V insulation test required by Clause 6.3.12 of
EN60079-11. This must be taken into account when
installing the apparatus.
The enclosure may be made of aluminium alloy and given a
protective polyurethane paint finish; however, care should
be taken to protect it from impact or abrasion if located in
Zone 0.
N1
ATEX Type n and Dust
Certification No.: BAS 00ATEX3105X
II 3 GD
Ui = 55 Vdc max
Ex nA nL T5 (–40 °C  Tamb  70 °C)
Dust rating: Ex tD A22 T80 °C (–20  Ta  40 °C) IP66
TABLE 54. RTD Assembly (3051CFx Option T or R)
Ui = 5 Vdc
Ii = 500 mA
Pi = 0.63 W
Special Conditions for Safe Use (X):
When the optional transient protection terminal block is
installed, the apparatus is not capable of withstanding the
500 V insulation test required by Clause 6.3.12 of IEC
60079-11. This must be taken into account when installing
the apparatus.
The enclosure may be made of aluminium alloy and given a
protective polyurethane paint finish; however care should be
taken to protect it from impact or abrasion located in Zone 0.
E7
Special Conditions for Safe Use (X):
When the optional transient protection terminal block is
installed, the apparatus is not capable of withstanding a 500
V r.m.s. test to case. This must be taken into account on any
installation in which it is used, for example, by assuring that
the supply to the apparatus is galvanically isolated.
E8
Japanese Certifications
E4
TIIS Flame-Proof
Ex d IIC T6
Certificate Description
C15850
C15851
3051C/D/1 4–20 mA HART
— no display
3051C/D/1 4–20 mA HART
— with display
IECEx Certifications
I7
IECEx Intrinsic Safety
Certification No.: IECEx BAS 09.0076X
Ex ia IIC T4 (–60 °C  Ta  70 °C)
IP66
TABLE 53. Input Parameters
Ui = 30 V
Ii = 200 mA
Pi = 0.9 W
Ci = 0.012 µF
98
Special Conditions for Safe Use (X):
This device contains a thin wall diaphragm. Installation,
maintenance, and use shall take into account the
environmental conditions to which the diaphragm will be
subjected. The manufacturer's instructions for installation
and maintenance shall be followed in detail to assure safety
during its expected lifetime.
ATEX Flame-Proof and Dust
Certification No.: KEMA 00ATEX2013X
II 1/2 GD
Ex d IIC T6 (–50  Ta  65 °C)
T5 (–50  Ta  80 °C)
Dust rating: Ex tD A20/A21 T90 °C, IP66
1180
Vmax = 55 Vdc
Special Conditions for Safe Use (X):
This device contains a thin wall diaphragm. Installation,
maintenance, and use shall take into account the
environmental conditions to which the diaphragm will be
subjected. The manufacturer’s instructions for installation
and maintenance shall be followed in detail to assure safety
during its expected lifetime.
In case of repair, contact Rosemount for dimensions of the
flameproof joints.
IECEx Explosion-Proof (Flame-Proof)
Certification No.: IECEx KEM 09.0034X
Ga/Gb Ex d IIC T6 or T5
Ex tD A20/A21 IP66 T90 °C
IP66
For information on the dimensions of the flameproof joints
the manufacturer shall be contacted.
N7
IECEx Type n
Certification No.: IECEx BAS 09.0077X
Ex nA nL IIC T5 (–40 °C  Ta  70 °C)
IP66
Special Conditions for Safe Use (X):
The apparatus is not capable of withstanding the 500 V
insulation test required by clause 6.8.1 of IEC 60079-15.
This must be taken into account when installing the
apparatus.
Combinations of Certifications
Stainless steel certification tag is provided when optional approval
is specified. Once a device labeled with multiple approval types is
installed, it should not be reinstalled using any other approval
types. Permanently mark the approval label to distinguish it from
unused approval types.
K5
E5 and I5 combination
KB
K5 and C6 combination
KD
K5, C6, I1, and E8 combination
K6
C6, I1, and E8 combination
K8
E8 and I1 combination
K7
E7, I7, and N7 combination
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
3051L FIELDBUS PROTOCOL
Special Conditions for Safe Use (X):
The device is not capable of withstanding the 500 V
insulation test required by Clause 6.3.12 of EN60079-11.
This must be taken into account when installing the
apparatus.
The enclosure may be made of aluminium alloy and given a
protective polyurethane paint finish; however, care should
be taken to protect it from impact or abrasion if located in
Zone 0.
Hazardous Locations Certifications
North American Certifications
FM Approvals
E5
I5
Explosion-Proof for Class I, Division 1, Groups B, C, and D.
Dust-Ignition-Proof for Class II, Division 1, Groups E, F, and
G. Dust-Ignition-Proof for Class III, Division 1. Factory
sealed. Enclosure Type 4X.
IA
Intrinsically Safe for use in Class I, Division 1, Groups A, B,
C, and D; Class II, Division 1, Groups E, F, and G; Class III,
Division 1 when connected per Rosemount drawing
03031-1019; Non-incendive for Class I, Division 2, Groups
A, B, C, and D.
Ui = 17.5 V
Ii = 380 mA
Pi = 5.32 W
Ci =  5 µF
Li = 10 µH
Special Conditions for Safe Use (X):
The device is not capable of withstanding the 500 V
insulation test required by Clause 6.3.12 of EN60079-11.
This must be taken into account when installing the
apparatus.
The enclosure may be made of aluminium alloy and given a
protective polyurethane paint finish; however, care should
be taken to protect it from impact or abrasion if located in
Zone 0.
Canadian Standards Association (CSA)
All CSA hazardous approved transmitters are certified per
ANSI/ISA 12.27.01-2003.
Explosion-Proof for Class I, Division 1, Groups B, C, and D.
Dust-Ignition-Proof for Class II and Class III, Division 1,
Groups E, F, and G. Suitable for Class I, Division 2 Groups
A, B, C, and D for indoor and outdoor hazardous locations.
Enclosure type 4X, factory sealed
C6
Explosion-Proof and intrinsically safe approval. Intrinsically
safe for Class I, Division 1, Groups A, B, C, and D when
connected in accordance with Rosemount drawings
03031-1024. Temperature Code T3C.
Explosion-Proof for Class I, Division 1, Groups B, C, and D.
Dust-Ignition-Proof for Class II and Class III, Division 1,
Groups E, F, and G. Suitable for Class I, Division 2 Groups
A, B, C, and D hazardous locations. Enclosure type 4X,
factory sealed
For input parameters see control drawing 03031-1024.
European Certifications
I1
ATEX Intrinsic Safety and Dust
Certification No.: BAS 98ATEX1355X
II 1 GD
Ex ia IIC T4 (Tamb = –60 to +60 °C)
Dust Rating: Ex tD A20 T70 °C (Tamb –20 to 40 °C) IP66
1180
Table 55. Input Parameters
Ui = 30 V
Ii = 300 mA
Pi = 1.3 W
Ci = 0 µF
Table 56. RTD Assembly (3051CFx Option T or R)
Ui = 5 Vdc
Ii = 500 mA
Pi = 0.63 W
II 1 G
Table 57. Input Parameters
Temperature Code: T4 (Ta = 60 °C), T3 (Ta = 85 °C),
Enclosure Type 4X
For input parameters see control drawing 03031-1019.
E6
ATEX FISCO Intrinsic Safety
Certification No.: BAS 98ATEX1355X
Ex ia IIC T4 (Tamb = –60 to +60 °C)
IP66
1180
N1
ATEX Type n and Dust
Certification No.: BAS 98ATEX3356X
II 3 GD
Ui = 40 Vdc max
Ex nL IIC T5 (Ta = –40 °C to 70 °C)
Dust rating: Ex tD A22 T80 °C (Tamb = –20 to 40 °C) IP66
Special Conditions for Safe Use (X):
The device is not capable of withstanding the 500 V
insulation test required by Clause 6.8.1 of EN60079-15. This
must be taken into account when installing the apparatus.
E8
ATEX Flame-Proof and Dust
Certification No.: KEMA 00ATEX2013X
Ex d IIC T6 (Tamb = –50 to 65 °C)
T5 (Tamb = –50 to 80 °C)
Dust rating: Ex tD A20/21 T90 °C, IP66
1180
Vmax = 55 Vdc
II 1/2 GD
Special Conditions for Safe Use (X):
This device contains a thin wall diaphragm. Installation,
maintenance, and use shall take into account the
environmental conditions to which the diaphragm will be
subjected. The manufacturer’s instructions for installation
and maintenance shall be followed in detail to assure safety
during its expected lifetime.
In case of repair, contact Rosemount for dimensions of the
flameproof joints.
99
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Japanese Certifications
E4
E7
TIIS Flame-Proof
Ex d IIC T6
Certificate Description
C15852
C15853
3051C/D/1 FOUNDATION Fieldbus
— no display
3051C/D/1 FOUNDATION Fieldbus
— with display
Special Conditions for Safe Use (X):
This device contains a thin wall diaphragm. Installation,
maintenance, and use shall take into account the
environmental conditions to which the diaphragm will be
subjected. The manufacturer's instructions for installation
and maintenance shall be followed in detail to assure safety
during its expected lifetime.
IECEx Certifications
I7
IECEx Intrinsic Safety
Certification No.: IECEx BAS 09.0076X
Ex ia IIC T4 (–60 °C  Ta  60 °C)
IP66
TABLE 58. Input Parameters
For information on the dimensions of the flameproof joints
the manufacturer shall be contacted.
N7
Ui = 30 V
Ii = 300 mA
Pi = 1.3 W
Ci = 0 µF
Li = 0 µH
Special Conditions for Safe Use (X):
1. If the apparatus is fitted with an optional 90 V transient
suppressor, it is not capable of withstanding the 500 V
insulation test required by clause 6.3.12 of IEC 60079-11.
This must be taken into account when installing the
apparatus.
2. The enclosure may be made of aluminium alloy and given
a protective polyurethane paint finish; however, care
should be taken to protect it from impact or abrasion if
located in Zone 0.
100
IECEx Type n
Certification No.: IECEx BAS 09.0077X
Ex nA nL IIC T5 (–40 °C  Ta  70 °C)
IP66
Special Conditions for Safe Use (X):
The apparatus is not capable of withstanding the 500 V
insulation test required by clause 6.8.1 of IEC 60079-15.
This must be taken into account when installing the
apparatus.
TABLE 59. RTD Assembly (3051CFx Option T or R)
Ui = 5 Vdc
Ii = 500 mA
Pi = 0.63W
IECEx Explosion-Proof (Flame-Proof)
Certification No.: IECEx KEM 09.0034X
Ga/Gb Ex d IIC T6 or T5
Ex tD A20/A21 IP66 T90 °C
IP66
Combinations of Certifications
Stainless steel certification tag is provided when optional approval
is specified. Once a device labeled with multiple approval types is
installed, it should not be reinstalled using any other approval
types. Permanently mark the approval label to distinguish it from
unused approval types.
K5
E5 and I5 combination
KB
K5 and C6 combination
KD
K5, C6, I1, and E8 combination
K6
C6, I1, and E8 combination
K8
E8 and I1 combination
K7
E7, I7, and N7 combination
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
2051L Product Certifications
Approved Manufacturing Locations
I5
Rosemount Inc. — Chanhassen, Minnesota USA
Emerson Process Management GmbH & Co. — Wessling,
Germany
Emerson Process Management Asia Pacific
Private Limited — Singapore
Beijing Rosemount Far East Instrument Co., LTD — Beijing, China
Intrinsically Safe for use in Class I, Division 1, Groups A, B,
C, and D; Class 1, Zone 0 AEx ia T4; Class II, Division 1,
Groups E, F, and G; Class III, Division 1 when connected
per Rosemount drawing 02051-1009; Non-incendive for
Class I, Division 2, Groups A, B, C, and D.
Temperature Code:T4 (Ta = 70 °C),
Enclosure Type 4X
For input parameters see control drawing 02051-1009.
European Directive Information
Canadian Standards Association (CSA)
The EC declaration of conformity for all applicable European
directives for this product can be found on the Rosemount website
at www.rosemount.com. A hard copy may be obtained by
contacting an Emerson Process Management representative.
All CSA hazardous approved transmitters are certified per
ANSI/ISA 12.27.01-2003.
E6
Explosion-Proof for Class I, Division 1, Groups B, C, and D.
Dust-Ignition-Proof for Class II and Class III, Division 1,
Groups E, F, and G. Suitable for Class I, Division 2 Groups
A, B, C, and D for indoor and outdoor hazardous locations.
Enclosure type 4X, factory sealed
I6
Intrinsically safe approval. Intrinsically safe for Class I,
Division 1, Groups A, B, C, and D when connected in
accordance with Rosemount drawing 02051-1008.
Temperature Code T3C; Ex ia IIC T3C.
Dust-Ignition-Proof for Class II and Class III, Division 1,
Groups E, F, and G. Suitable for Class I, Division 2 Groups
A, B, C, and D hazardous locations. Enclosure type 4X,
factory sealed
For input parameters see control drawing 02051-1008.
ATEX Directive (94/9/EC)
All 2051 transmitters comply with the ATEX Directive.
European Pressure Equipment Directive (PED) (97/23/EC)
2051CG2, 3, 4, 5; 2051CD2, 3, 4, 5 (also with P9 option)
— QS Certificate of Assessment EC No. 59552-2009-CE-HOU-DNV
Module H Conformity Assessment
All other 2051 Pressure Transmitters
— Sound Engineering Practice
Transmitter Attachments: Diaphragm Seal - Process
Flange - Manifold
— Sound Engineering Practice
European Certifications
I1
Electro Magnetic Compatibility (EMC) (2004/108/EC)
All 2051 Pressure Transmitters meet all of the requirements of
EN61326:2006 and NAMUR NE-21.
Ordinary Location Certification for Factory Mutual
II 1 G
Table 60. Input Parameters
As standard, the transmitter has been examined and tested to
determine that the design meets basic electrical, mechanical,
and fire protection requirements by FM, a nationally recognized
testing laboratory (NRTL) as accredited by the Federal
Occupational Safety and Health Administration (OSHA).
Ui = 30 V
Ii = 200 mA
Pi = 1.0 W
Ci = 0.012 µF
Li = 10 µH
2051L HART PROTOCOL
Table 61. RTD Assembly (2051CFx Option T or R)
Ui = 5 Vdc
Ii = 500 mA
Pi = 0.63 W
Hazardous Locations Certifications
North American Certifications
Special Conditions for Safe Use (X):
When the optional transient protection terminal block is
installed, the apparatus is not capable of withstanding the
500 V insulation test required by Clause 6.3.12 of
EN60079-11. This must be taken into account when
installing the apparatus.
FM Approvals
E5
ATEX Intrinsic Safety
Certification No. Baseefa08ATEX0129X
Ex ia IIC T4 (–60  Ta  +70 °C)
IP66 IP68
1180
Explosion-Proof for Class I, Division 1, Groups B, C, and D.
Dust-Ignition-Proof for Class II, Division 1, Groups E, F, and
G. Dust-Ignition-Proof for Class III, Division 1.
T5 (Ta = 85 °C), Factory Sealed, Enclosure Type 4X
N1
ATEX Type n
Certification No. Baseefa08ATEX0130X
Ex nAnL IIC T4 (–40  Ta  +70 °C)
Ui = 42.4 Vdc max
IP66
II 3 G
101
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Special Conditions for Safe Use (X):
When the optional transient protection terminal block is
installed, the apparatus is not capable of withstanding a 500
V r.m.s. test to case. This must be taken into account on any
installation in which it is used, for example by assuring that
the supply to the apparatus is galvanically isolated.
E1
ATEX Flame-Proof
Certification No. KEMA 08ATEX0090X
Ex d IIC T6 (–50  Ta  65 °C)
Ex d IIC T5 (–50  Ta  80 °C)
IP66
1180
Vmax = 42.4 Vdc
Table 63. RTD Assembly (2051CFx Option T or R)
Ui = 5 Vdc
Ii = 500 mA
Pi = 0.63 W
Special Conditions for Safe Use (X):
When the optional transient protection terminal block is
installed, the apparatus is not capable of withstanding the
500 V insulation test required by Clause 6.3.12 of
IEC60079-11. This must be taken into account when
installing the apparatus.
II 1/2 G
E7
Special Conditions for Safe Use (X):
This device contains a thin wall diaphragm. Installation,
maintenance, and use shall take into account the
environmental conditions to which the diaphragm will be
subjected. The manufacturer’s instructions for installation
and maintenance shall be followed in detail to assure safety
during its expected lifetime.
The Ex d blanking elements, cable glands, and wiring shall
be suitable for a temperature of 90 °C.
In case of repair, contact the manufacturer for information on
the dimensions of the flameproof joints.
ND
ATEX Dust
Certification No. Baseefa08ATEX0182X
II 1 D
Dust Rating: II 1 D Ex tD A20 T115 °C (-20 °C Ta  85 °C)
IP66 IP68
Vmax = 42.4 Vdc
A = 22 mA
1180
Special Conditions for Safe Use (X):
1. The user must ensure that the maximum rated voltage
and current (42.4 V, 22 mA, DC) are not exceeded. All
connections to other apparatus or associated apparatus
shall have control over this voltage and current equivalent
to a category “ib” circuit according to EN 60079-1.
2. Cable entries must be used which maintain the ingress
protection of the enclosure to at least IP66.
3. Unused cable entries must be filled with suitable blanking
plugs which maintain the ingress protection of the
enclosure to at least IP66.
4. Cable entries and blanking plugs must be suitable for the
ambient range of the apparatus and capable of
withstanding a 7J impact test.
Special Conditions for Safe Use (X):
This device contains a thin wall diaphragm. Installation,
maintenance, and use shall take into account the
environmental conditions to which the diaphragm will be
subjected. The manufacturer’s instructions for installation
and maintenance shall be followed in detail to assure safety
during its expected lifetime.
The Ex d blanking elements, cable glands, and wiring shall
be suitable for a temperature of 90 °C.
In case of repair, contact the manufacturer for information on
the dimensions of the flameproof joints.
N7
IECEx Intrinsic Safety
Certification No. IECExBAS08.0045X II 1 G
Ex ia IIC T4 (–60  Ta  +70 °C)
1180
When the optional transient protection terminal block is
installed, the apparatus is not capable of withstanding a 500
V r.m.s. test to case. This must be taken into account on any
installation in which it is used, for example by assuring that
the supply to the apparatus is galvanically isolated.
TIIS Certifications
E4
102
TIIS Flame-Proof
Ex d IIC T6
TC18872
TC18873
Coplanar with Display
Coplanar no display
Inmetro Certifications
E2
Flame-Proof
Certificate No. CEPEL EX-1767/09X
BR-Ex d IIC T6/T5
I2
Intrinsic Safety
Certificate No. CEPEL EX-1768/09X
BR-Ex ia IIC T4
Table 62. Input Parameters
Ui = 30 V
Ii = 200 mA
Pi = 1.0 W
Ci = 0.012 µF
Li = 10 µH
IECEx Type n
Certification No. IECExBAS08.0046X II 3 G
Ex nAnL IIC T4 (–40  Ta  +70 °C)
Ui = 42.4 Vdc max
Special Conditions for Safe Use (X):
IECEx Certifications
I7
IECEx Explosion-Proof (Flame-Proof)
Certification No. IECEx KEM 08.0024X II 1/2 G
Ex d IIC T6 (–50  Ta  65 °C)
Ex d IIC T5 (–50  Ta  80 °C)
1180
Vmax = 42.4 Vdc
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Table 64. Input Parameters
Combinations of Certifications
Ui = 30 V
Ii = 200 mA
Pi = 1.0 W
Ci = 0.012 µF
Li = 10 µH
Stainless steel certification tag is provided when optional approval
is specified. Once a device labeled with multiple approval types is
installed, it should not be reinstalled using any other approval
types. Permanently mark the approval label to distinguish it from
unused approval types.
Table 65. RTD Assembly (2051CFx Option T or R)
Ui = 5 Vdc
Ii = 500 mA
Pi = 0.63 W
Special Conditions for Safe Use (X):
When the optional transient protection terminal block is
installed, the apparatus is not capable of withstanding the
500 V insulation test required by Clause 6.3.12 of
IEC60079-11. This must be taken into account when
installing the apparatus.
K1
E1, I1, N1, and ND combination
K4
E4 and I4 combination
K5
E5 and I5 combination
K6
I6 and E6 combination
K7
E7, I7, and N7 combination
KA
E1, I1, E6, and I6 combination
KB
E5, I5, E6, and I6 combination
KC
E1, I1, E5, and I5 combination
KD
E1, I1, E5, I5, E6, and I6 combination
GOST - Russia Certifications
IM
Intrinsic Safety
Consult factory for availability
EM
Flame-Proof
Consult factory for availability
China (NEPSI) Certifications
NOTE
Refer to Appendix B of the 3051S Reference Manual (document
number 00809-0100-4801) for Special Conditions for Safe Use.
E3
Flame-Proof
Certificate No.: GYJ081230
Ex d IIC T5/T6
I3
Intrinsic Safety
Certificate No.: GYJ081231X
Ex ia IIC T4
Table 66. Input Parameters
Ui = 30 V
Ii = 200 mA
Pi = 1.0 W
Ci = 0.012 µF
Li = 10 µH
CCoE Certifications
IW
Intrinsic Safety
Ex ia IIC T4
EW
Flame-Proof
Ex d IIC T5 or T6
103
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Dimensional Drawings
Rosemount 1199 Direct Mount Connection Types for General Purpose Seal Systems
Low Side
Capillary
Connection
0.57
(14)
4.57
(116)
Rosemount 3051
One-Seal System
1199 _ _ _ 93
1199 _ _ _ 97
Rosemount 3051
Two-Seal System
1199 _ _ _ 94
1199 _ _ _ 96
(Add Low Side Capillary)
Rosemount 3051
One-Seal System
1199 _ _ _ D3 (4-in. Connection)
1199 _ _ _ D7 (4-in. Connection)
Rosemount 3051
Two-Seal System
1199 _ _ _ D4 (4-in. Conn.)
1199 _ _ _ D6 (4-in. Conn.)
(Add Low Side Capillary)
2.57
(65)
Rosemount 3051
One-Seal System
1199 _ _ _ B3 (2-in. Connection)
1199 _ _ _ B7 (2-in. Connection)
Rosemount 3051
Two-Seal System
1199 _ _ _ B4 (2-in. Conn.)
1199 _ _ _ B6 (2-in. Conn.)
(Add Low Side Capillary)
1.00 (25)
Rosemount 3051T
1199 _ _ _ 95
1.50
(38)
Rosemount 2088
1199 _ _ _ 95
NOTES
Dimensions are in inches (millimeters).
Transmitters are shown with Flush Flanged (FFW) Seals.
104
5.72
(145)
Rosemount 2088
1199 _ _ _ D5
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Figure 2. FFW Flush Flanged Seal - Two-Piece Design (shown with flushing ring)
A
C
2.00 51 STANDARD
2.25 57 EXPANDED
B
D
M
0.310 8 STANDARD
0.500 13 EXPANDED
FLUSHING CONNECTION
RING (OPTIONAL)
K
F
L
N
G
ANSI/ ASME
Table 67. Dimensional Table for FFW Flush Flanged Raised Face Seals Two Piece (Upper Housing and Flange) Design(1)
Pipe Size
Class
Bolts
2-in.
150 lb.
6.00 (152)
0.69 (18)
4.75 (121)
4
0.75 (19)
2.30 (58)
3.62 (92)
300 lb.
6.50 (165)
0.82 (21)
5.00 (127)
8
0.75 (19)
2.30 (58)
3.62 (92)
600 lb.
6.50 (165)
1.00 (25)
5.00 (127)
8
0.75 (19)
2.30 (58)
3.62 (92)
150 lb.
7.50 (191)
0.88 (22)
6.00 (152)
4
0.75 (19)
3.50 (89)
5.00 (127)
300 lb.
8.25 (210)
1.06 (27)
6.62 (168)
8
0.88 (22)
3.50 (89)
5.00 (127)
600 lb.
8.25 (210)
1.25 (32)
6.62 (168)
8
0.88 (22)
3.50 (89)
5.00 (127)
150 lb.
9.00 (229)
0.88 (22)
7.50 (191)
8
0.75 (19)
3.50 (89)
6.20 (157)
300 lb.
10.0 (254)
1.19 (30)
7.88 (200)
8
0.88 (22)
3.50 (89)
6.20 (157)
600 lb.
10.75 (273)
1.50 (38)
8.50 (216)
8
1.00 (25)
3.50 (89)
6.20 (157)
PN 40
6.50 (165)
0.79 (20)
4.92 (125)
4
0.71 (18)
2.30 (58)
4.00 (102)
PN 63
7.08 (180)
1.02 (26)
5.31 (135)
4
0.87 (22)
2.30 (58)
4.00 (102)
PN 100
7.68 (195)
1.10 (28)
5.71 (145)
4
1.02 (26)
2.30 (58)
4.00 (102)
PN 40
7.87 (200)
0.94 (24)
6.30 (160)
8
0.71 (18)
3.50 (89)
5.43 (138)
PN 63
8.46 (215)
1.10 (28)
6.69 (170)
8
0.88 (22)
3.50 (89)
5.43 (138)
PN 100
9.06 (230)
1.26 (32)
7.09 (180)
8
1.02 (26)
3.50 (89)
5.43 (138)
PN 16
8.66 (220)
0.79 (20)
7.09 (180)
8
0.71 (18)
3.50 (89)
6.20 (157)
PN 40
9.25 (235)
0.94 (24)
7.48 (190)
8
0.87 (22)
3.50 (89)
6.20 (157)
PN 63
9.84 (250)
1.18 (30)
7.87 (200)
8
1.02 (26)
3.50 (89)
6.20 (157)
10K
6.10 (155)
0.55 (14)
4.72 (120)
4
0.75 (19)
2.30 (58)
3.62 (92)
20K
6.10 (155)
0.63 (16)
4.72 (120)
8
0.75 (19)
2.30 (58)
3.62 (92)
40K
6.50 (165)
0.94 (24)
5.12 (130)
8
0.75 (19)
2.30 (58)
4.00 (102)
10K
7.28 (185)
0.63 (16)
5.91 (150)
8
0.75 (19)
3.50 (89)
5.00 (127)
20K
7.87 (200)
0.79 (20)
6.30 (160)
8
0.91 (23)
3.50 (89)
5.00 (127)
40K
8.27 (210)
1.18 (30)
6.69 (170)
8
0.91 (23)
3.50 (89)
5.43 (138)
10K
8.27 (210)
0.63 (16)
6.89 (175)
8
0.75 (19)
3.50 (89)
6.20 (157)
20K
8.86 (225)
0.87 (22)
7.28 (185)
8
0.91 (23)
3.50 (89)
6.20 (157)
40K
9.84 (250)
1.34 (34)
8.07 (205)
8
0.98 (25)
3.50 (89)
6.20 (157)
4-in.
EN1092-1
DN 50
DN 80
DN 100
JIS 50A
JIS
JIS 80A
JIS 100A
Bolt
Circle
“C”
Raised Face
Diameter
“G”
Bolt Hole
Diameter
“D”
3-in.
Flange
Thickness
“B”
Standard
Diaphragm
Diameter
“F”
Flange
Diameter
“A”
(1) Dimensions are in inches (millimeters).
105
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Table 57. Dimensional Table for FFW Flush Flanged Raised Face Seals Two Piece (Upper Housing and Flange) Design(1)
Pipe Size
ANSI / ASME
2-in.
3-in.
4-in.
EN1092-1
DN 50
DN 80
DN 100
JIS 50A
JIS
JIS 80A
JIS 100A
INNER DIAMETER
“K”
BEVELED EDGE “L”
THICKNESS WITH
1/4-NPT F.C. “M”
THICKNESS WITH
1/2-NPT F.C. “M”
MINIMUM GASKET
I.D. “N”
2.12 (54)
2.12 (54)
2.12 (54)
3.60 (91)
3.60 (91)
3.60 (91)
3.60 (91)
3.60 (91)
3.60 (91)
2.48 (63)
2.48 (63)
2.48 (63)
—
—
—
—
—
—
0.97 (25)
0.97 (25)
0.97 (25)
0.97 (25)
0.97 (25)
0.97 (25)
0.97 (25)
0.97 (25)
0.97 (25)
1.30 (33)
1.30 (33)
1.30 (33)
1.30 (33)
1.30 (33)
1.30 (33)
1.30 (33)
1.30 (33)
1.30 (33)
2.51 (64)
2.51 (64)
2.51 (64)
3.70 (94)
3.70 (94)
3.70 (94)
3.70 (94)
3.70 (94)
3.70 (94)
2.40 (61)
2.40 (61)
2.40 (61)
3.60 (91)
3.60 (91)
3.60 (91)
3.60 (91)
3.60 (91)
3.60 (91)
—
—
—
—
—
—
—
—
—
0.97 (25)
0.97 (25)
0.97 (25)
0.97 (25)
0.97 (25)
0.97 (25)
0.97 (25)
0.97 (25)
0.97 (25)
1.30 (33)
1.30 (33)
1.30 (33)
1.30 (33)
1.30 (33)
1.30 (33)
1.30 (33)
1.30 (33)
1.30 (33)
2.51 (64)
2.51 (64)
2.51 (64)
3.70 (94)
3.70 (94)
3.70 (94)
3.70 (94)
3.70 (94)
3.70 (94)
2.12 (54)
2.12 (54)
2.40 (61)
3.60 (91)
3.60 (91)
3.60 (91)
3.60 (91)
3.60 (91)
3.60 (91)
2.48 (63)
2.48 (63)
—
—
—
—
—
—
—
0.97 (25)
0.97 (25)
0.97 (25)
0.97 (25)
0.97 (25)
0.97 (25)
0.97 (25)
0.97 (25)
0.97 (25)
1.30 (33)
1.30 (33)
1.30 (33)
1.30 (33)
1.30 (33)
1.30 (33)
1.30 (33)
1.30 (33)
1.30 (33)
2.51 (64)
2.51 (64)
2.51 (64)
3.70 (94)
3.70 (94)
3.70 (94)
3.70 (94)
3.70 (94)
3.70 (94)
(1) Dimensions are in inches (millimeters).
106
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Figure 3. FFW Flush Flanged Seal - One-Piece Design (shown with flushing ring)
A
C
B
J
F
N
G
D
Table 58. Dimensional Table for FFW Flush Flanged Seals One Piece (Upper Housing and Flange) Design (Option code E)(1)
ANSI / ASME
3-in.
4-in.
EN1092-1
DN 50
DN 80
DN 100
JIS 50A
JIS
JIS 80A
JIS 100A
Standard
Diaphragm
Diameter
“F”
Raised
Face
Diameter
“G”
Raised
Face
Height
“J”
MINIMUM
GASKET
I.D. “N”
4.75 (121)
5.00 (127)
5.00 (127)
6.00 (152)
6.62 (168)
6.62 (168)
7.50 (191)
7.88 (200)
8.50 (216)
4
8
8
4
8
8
8
8
8
0.75 (19)
0.75 (19)
0.75 (19)
0.75 (19)
0.88 (22)
0.88 (22)
0.75 (19)
0.88 (22)
1.00 (25)
2.30 (58)
2.30 (58)
2.30 (58)
3.50 (89)
3.50 (89)
3.50 (89)
3.50 (89)
3.50 (89)
3.50 (89)
3.62 (92)
3.62 (92)
3.62 (92)
5.00 (127)
5.00 (127)
5.00 (127)
6.20 (157)
6.20 (157)
6.20 (157)
0.06 (1.5)
0.06 (1.5)
0.25 (6.4)
0.06 (1.5)
0.06 (1.5)
0.25 (6.4)
0.06 (1.5)
0.06 (1.5)
0.25 (6.4)
2.51 (64)
2.51 (64)
2.51 (64)
3.70 (94)
3.70 (94)
3.70 (94)
3.70 (94)
3.70 (94)
3.70 (94)
0.79 (20)
1.02 (26)
1.10 (28)
0.94 (24)
1.10 (28)
1.26 (32)
0.79 (20)
0.94 (24)
1.18 (30)
4.92 (125)
5.31 (135)
5.71 (145)
6.30 (160)
6.69 (170)
7.09 (180)
7.09 (180)
7.48 (190)
7.87 (200)
4
4
4
8
8
8
8
8
8
0.71 (18)
0.87 (22)
1.02 (26)
0.71 (18)
0.88 (22)
1.02 (26)
0.71 (18)
0.87 (22)
1.02 (26)
2.30 (58)
2.30 (58)
2.30 (58)
3.50 (89)
3.50 (89)
3.50 (89)
3.50 (89)
3.50 (89)
3.50 (89)
4.00 (102)
4.00 (102)
4.00 (102)
5.43 (138)
5.43 (138)
5.43 (138)
6.20 (157)
6.20 (157)
6.20 (157)
0.12 (3.0)
0.12 (3.0)
0.12 (3.0)
0.12 (3.0)
0.12 (3.0)
0.12 (3.0)
0.12 (3.0)
0.12 (3.0)
0.12 (3.0)
2.51 (64)
2.51 (64)
2.51 (64)
3.70 (94)
3.70 (94)
3.70 (94)
3.70 (94)
3.70 (94)
3.70 (94)
0.55 (14)
0.63 (16)
0.94 (24)
0.63 (16)
0.79 (20)
1.18 (30)
0.63 (16)
0.87 (22)
1.34 (34)
4.72 (120)
4.72 (120)
5.12 (130)
5.91 (150)
6.30 (160)
6.69 (170)
6.89 (175)
7.28 (185)
8.07 (205)
4
8
8
8
8
8
8
8
8
0.75 (19)
0.75 (19)
0.75 (19)
0.75 (19)
0.91 (23)
0.91 (23)
0.75 (19)
0.91 (23)
0.98 (25)
2.30 (58)
2.30 (58)
2.30 (58)
3.50 (89)
3.50 (89)
3.50 (89)
3.50 (89)
3.50 (89)
3.50 (89)
3.62 (92)
3.62 (92)
4.00 (102)
5.00 (127)
5.00 (127)
5.43 (138)
6.20 (157)
6.20 (157)
6.20 (157)
0.08 (2.0)
0.08 (2.0)
0.08 (2.0)
0.08 (2.0)
0.08 (2.0)
0.08 (2.0)
0.08 (2.0)
0.08 (2.0)
0.08 (2.0)
2.51 (64)
2.51 (64)
2.51 (64)
3.70 (94)
3.70 (94)
3.70 (94)
3.70 (94)
3.70 (94)
3.70 (94)
Flange
Thickness
“B”
Bolt
Circle
“C”
150 lb.
300 lb.
600 lb.
150 lb.
300 lb.
600 lb.
150 lb.
300 lb.
600 lb.
6.00 (152)
6.50 (165)
6.50 (165)
7.50 (191)
8.25 (210)
8.25 (210)
9.00 (229)
10.00 (254)
10.75 (273)
0.69 (18)
0.82 (21)
1.00 (25)
0.88 (22)
1.06 (27)
1.25 (32)
0.88 (22)
1.19 (30)
1.50 (38)
PN 40
PN 63
PN 100
PN 40
PN 63
PN 100
PN 16
PN 40
PN 63
6.50 (165)
7.08 (180)
7.68 (195)
7.87 (200)
8.46 (215)
9.06 (230)
8.66 (220)
9.25 (235)
9.84 (250)
10K
20K
40K
10K
20K
40K
10K
20K
40K
6.10 (155)
6.10 (155)
6.50 (165)
7.28 (185)
7.87 (200)
8.27 (210)
8.27 (210)
8.86 (225)
9.84 (250)
Pipe Size Class
2-in.
Bolts
Bolt Hole
Diameter
“D”
Flange
Diameter
“A”
(1) Dimensions are in inches (millimeters).
107
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Figure 4. FFW Flush Flanged Seal - Flushing Connection Ring (Lower Housing)
M
K
L
G
Table 59. Dimensional Table for FFW Flushing Connection Ring (Lower Housing)(1)
Pipe Size
ANSI / ASME
2-in.
3-in.
4-in.
EN1092-1
DN 50
DN 80
DN 100
JIS 50A
JIS
JIS 80A
JIS 100A
OUTER DIAMETER
“G”
Inner Diameter “K”
Beveled Edge “L”
Thickness with
1
/4–NPT F.C. “M”
Thickness with
1
/2–NPT F.C. “M”
3.62 (92)
3.62 (92)
3.62 (92)
5.00 (127)
5.00 (127)
5.00 (127)
6.20 (157)
6.20 (157)
6.20 (157)
2.12 (54)
2.12 (54)
2.12 (54)
3.60 (91)
3.60 (91)
3.60 (91)
3.60 (91)
3.60 (91)
3.60 (91)
2.48 (63)
2.48 (63)
2.48 (63)
—
—
—
—
—
—
0.97 (25)
0.97 (25)
0.97 (25)
0.97 (25)
0.97 (25)
0.97 (25)
0.97 (25)
0.97 (25)
0.97 (25)
1.30 (33)
1.30 (33)
1.30 (33)
1.30 (33)
1.30 (33)
1.30 (33)
1.30 (33)
1.30 (33)
1.30 (33)
4.00 (102)
4.00 (102)
4.00 (102)
5.43 (138)
5.43 (138)
5.43 (138)
6.20 (157)
6.20 (157)
6.20 (157)
2.40 (61)
2.40 (61)
2.40 (61)
3.60 (91)
3.60 (91)
3.60 (91)
3.60 (91)
3.60 (91)
3.60 (91)
—
—
—
—
—
—
—
—
—
0.97 (25)
0.97 (25)
0.97 (25)
0.97 (25)
0.97 (25)
0.97 (25)
0.97 (25)
0.97 (25)
0.97 (25)
1.30 (33)
1.30 (33)
1.30 (33)
1.30 (33)
1.30 (33)
1.30 (33)
1.30 (33)
1.30 (33)
1.30 (33)
3.62 (92)
3.62 (92)
4.00 (102)
5.00 (127)
5.00 (127)
5.43 (138)
6.20 (157)
6.20 (157)
6.20 (157)
2.12 (54)
2.12 (54)
2.40 (61)
3.60 (91)
3.60 (91)
3.60 (91)
3.60 (91)
3.60 (91)
3.60 (91)
2.48 (63)
2.48 (63)
—
—
—
—
—
—
—
0.97 (25)
0.97 (25)
0.97 (25)
0.97 (25)
0.97 (25)
0.97 (25)
0.97 (25)
0.97 (25)
0.97 (25)
1.30 (33)
1.30 (33)
1.30 (33)
1.30 (33)
1.30 (33)
1.30 (33)
1.30 (33)
1.30 (33)
1.30 (33)
(1) Dimensions are in inches (millimeters).
108
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Figure 5. RFW Flanged Seal (For smaller process connection)
Stud Bolt Design
Standard Design
3.74 95.0
A
D
A
B
C
E
C
E
F
SUPPLIED STUDS
B
D
Table 60. RFW Flanged Seal Standard Design Dimensions(1)(2)
Pipe Size / Class
ANSI / ASME
Flange
Thickness
(B)
Overall Height
(C)
No or 1/4-in.
NPT flush
connection
1
Bolt Circle
Diameter (D)
Bolt Hole
Diameter (E)
Lower
Housing
Diameter (F)
/2-in. NPT
flush
connection
1
2500 lb.
5.25 (133.4)
1.19 (30.2)
2.45 (62.2)
2.79 (70.9)
3.50 (88.9)
0.875 (22.2)
2.62 (66.5)
3
300/600 lb.
4.62 (117.3)
0.62 (15.7)
2.45 (62.2)
2.79 (70.9)
3.25 (82.6)
0.75 (19.5)
2.62 (66.5)
1-in.
150 lb.
4.25 (107.9)
0.50 (12.7)
2.45 (62.2)
2.79 (70.9)
3.12 (79.3)
0.625 (15.9)
2.62 (66.5)
300 lb.
4.88 (124.0)
0.62 (15.8)
2.45 (62.2)
2.79 (70.9)
3.50 (88.9)
0.75 (19.5)
2.62 (66.5)
600 lb.
4.88 (124.0)
0.69 (17.5)
2.45 (62.2)
2.79 (70.9)
3.50 (88.9)
0.75 (19.5)
2.62 (66.5)
150 lb.
5.00 (127.0)
0.62 (15.8)
2.45 (62.2)
2.79 (70.9)
3.88 (98.6)
0.625 (15.9)
2.88 (73.2)
300 lb.
6.12 (155.4)
0.75 (19.1)
2.45 (62.2)
2.79 (70.9)
4.50 (114)
0.875 (22.2)
2.88 (73.2)
600 lb.
6.12 (155.4)
0.88 (22.4)
2.45 (62.2)
2.79 (70.9)
4.50 (114)
0.875 (22.2)
2.88 (73.2)
DN 25
PN 40
4.53 (115)
0.71 (18.0)
2.45 (62.2)
2.79 (70.9)
3.35 (85)
0.55 (14)
2.68 (68.1)
DN 40
PN 40
5.91 (150)
0.71 (18.0)
2.45 (62.2)
2.79 (70.9)
4.33 (110)
0.71 (18)
3.47 (88.1)
20A
40K
4.72 (120)
0.79 (20)
2.45 (62.2)
2.79 (70.9)
3.35 (85)
0.75 (19)
2.62 (66.5)
25A
10K
4.92 (125)
0.55 (14)
2.45 (62.2)
2.79 (70.9)
3.54 (90)
0.75 (19)
2.62 (66.5)
20K
4.92 (125)
0.63 (16)
2.45 (62.2)
2.79 (70.9)
3.54 (90)
0.75 (19)
2.62 (66.5)
40K
5.12 (130)
0.87 (22)
2.45 (62.2)
2.79 (70.9)
3.74 (95)
0.75 (19)
2.88 (73.2)
10K
5.51 (140)
0.63 (16)
2.45 (62.2)
2.79 (70.9)
4.13 (105)
0.75 (19)
3.46 (88.0)
20K
5.51 (140)
0.71 (18)
2.45 (62.2)
2.79 (70.9)
4.13 (105)
0.75 (19)
3.46 (88.0)
40K
6.30 (160)
0.94 (24)
2.45 (62.2)
2.79 (70.9)
4.72 (120)
0.91 (23)
3.62 (92.0)
/2-in.
/4-in.
11/2-in.
JIS
EN 1092-1
Class
Flange
Diameter (A)
40A
(1) Dimensions are in inches (millimeters).
(2) Lower housing is loose on standard design, consult factory for retained lower housing options.
109
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Table 61. RFW Flanged Seal Stud Bolt Design Dimensions(1)
Overall Height (A)
NPT
flush
connection
2.82 (71.6)
2.87 (72.9)
2.82 (71.6)
2.38 (60.5)
2.62 (66.5)
2.75 (69.9)
1/2-13NC,
1/2-13NC,
/4-in.
150 lb.
300/600 lb.
150 lb.
No or 1/4-in.
NPT flush
connection
2.52 (64.0)
2.77 (70.4)
2.52 (64.0)
2.5-in.
2.5-in.
1
/2-13NC, 2.5-in.
3.74 (95.0)
3.75 (95.3)
3.88 (98.6)
1.38 (35.1)
1.38 (35.1)
1.69 (42.9)
DN 15
DN 15
PN 40
PN 100/160
2.52 (64.0)
2.52 (64.0)
2.82 (71.6)
2.82 (71.6)
2.56 (65)
2.95 (75)
M12x1.75, 60mm
M12x1.75, 60mm
3.74 (95.0)
4.13 (105)
1.77 (45.0)
1.77 (45.0)
10A
10K
2.52 (64.0)
2.52 (64.0)
2.52 (64.0)
2.52 (64.0)
2.52 (64.0)
2.52 (64.0)
2.52 (64.0)
2.52 (64.0)
2.82 (71.6)
2.82 (71.6)
2.82 (71.6)
2.82 (71.6)
2.82 (71.6)
2.82 (71.6)
2.82 (71.6)
2.82 (71.6)
2.56 (65.0)
2.56 (65.0)
2.95 (75.0)
2.76 (70.0)
2.76 (70.0)
3.15 (80.0)
2.95 (75.0)
2.95 (75.0)
M10x1.5,60mm
M12x1.75,60mm
M12x1.75,60mm
M10x1.5,60mm
M12x1.75,60mm
M16x2.0,70mm
M10x1.5,60mm
M12x1.75,60mm
3.74 (95.0)
3.74 (95.0)
4.33 (110.0)
3.74 (95.0)
3.74 (95.0)
4.53 (115.0)
3.94 (100.0)
3.94 (100.0)
1.81 (46.0)
1.81 (46.0)
2.05 (52.0)
2.01 (51.0)
2.01 (51.0)
2.17 (55.0)
2.20 (56.0)
2.20 (56.0)
ANSI / ASME
EN 1092-1
1/2-in.
1/2-in.
3
20K
JIS
40K
15A
10K
20K
40K
20A
10K
20K
1/2-in.
(1) Upper and lower housing installed bolt torque with CS or SST bolts is 23 ft-lbs. (31 Nm).
110
Raised Face
Diameter (E)
Class
Pipe Size / Class
Stud (Size,
Length) (C)
Lower
Housing
Diameter (D)
Stud Circle
Diameter (B)
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Figure 6. EFW Extended Flanged Seal - Extended Flanged Assembly
A
C
B
D
F
EXTENSION
LENGTH
E
Table 62. EFW Extended Flanged Seal Dimensions(1)
Pipe Size
ANSI / ASME
11/2-in.
2-in.
3-in.
4-in.
EN 1092-1
DN 50
DN 80
DN 100
JIS 50A
JIS
JIS 80A
JIS 100A
(1)
Class
Flange Thickness
Flange Diameter “A” “B”
Bolt Circle “C”
Bolts
Bolt Hole
Diameter “D”
Raised Face
Diameter “F”
150 lb.
300 lb.
600 lb.
150 lb.
300 lb.
600 lb.
150 lb.
300 lb.
600 lb.
150 lb.
300 lb.
600 lb.
PN 40
PN 63
PN 100
PN 40
PN 63
PN 100
PN 16
PN 40
PN 63
10K
20K
40K
10K
20K
40K
10K
20K
40K
5.00 (127)
6.12 (156)
6.12 (156)
6.00 (152)
6.50 (165)
6.50 (165)
7.50 (191)
8.25 (210)
8.25 (210)
9.00 (229)
10.00 (254)
10.75 (273)
6.50 (165)
7.08 (180)
7.68 (195)
7.87 (200)
8.46 (215)
9.06 (230)
8.66 (220)
9.25 (235)
9.84 (250)
6.10 (155)
6.10 (155)
6.50 (165)
7.28 (185)
7.87 (200)
8.27 (210)
8.27 (210)
8.86 (225)
9.84 (250)
3.88 (99)
4.50 (114)
4.50 (114)
4.75 (121)
5.00 (127)
5.00 (127)
6.00 (152)
6.62 (168)
6.62 (168)
7.50 (191)
7.88 (200)
8.50 (216)
4.92 (125)
5.31 (135)
5.71 (145)
6.30 (160)
6.69 (170)
7.09 (180)
7.09 (180)
7.48 (190)
7.87 (200)
4.72 (120)
4.72 (120)
5.12 (130)
5.91 (150)
6.30 (160)
6.69 (170)
6.89 (175)
7.28 (185)
8.07 (205)
4
4
4
4
8
8
4
8
8
8
8
8
4
4
4
8
8
8
8
8
8
4
8
8
8
8
8
8
8
8
0.63 (16)
0.88 (22)
0.88 (22)
0.75 (19)
0.75 (19)
0.75 (19)
0.75 (19)
0.88 (22)
0.88 (22)
0.75 (19)
0.88 (22)
1.00 (25)
0.71 (18)
0.87 (22)
1.02 (26)
0.71 (18)
0.88 (22)
1.02 (26)
0.71 (18)
0.87 (22)
1.02 (26)
0.75 (19)
0.75 (19)
0.75 (19)
0.75 (19)
0.91 (23)
0.91 (23)
0.75 (19)
0.91 (23)
0.98 (25)
2.88 (73)
2.88 (73)
2.88 (73)
3.62 (92)
3.62 (92)
3.62 (92)
5.00 (127)
5.00 (127)
5.00 (127)
6.20 (158)
6.20 (158)
6.20 (158)
4.00 (102)
4.00 (102)
4.00 (102)
5.43 (138)
5.43 (138)
5.43 (138)
6.20 (158)
6.20 (158)
6.20 (158)
3.62 (92)
3.62 (92)
4.00 (102)
5.00 (127)
5.00 (127)
5.43 (138)
6.20 (158)
6.20 (158)
6.20 (158)
0.62 (16)
0.75 (19)
0.88 (22)
0.69 (18)
0.82 (21)
1.00 (25)
0.88 (22)
1.06 (27)
1.25 (32)
0.88 (22)
1.19 (30)
1.50 (38)
0.79 (20)
1.02 (26)
1.10 (28)
0.94 (24)
1.10 (28)
1.26 (32)
0.79 (20)
0.94 (24)
1.18 (30)
0.55 (14)
0.63 (16)
0.94 (24)
0.63 (16)
0.79 (20)
1.18 (30)
0.63 (16)
0.87 (22)
1.34 (34)
Dimensions are in inches (millimeters).
111
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Process Connection Size(1)
ANSI B16.5
EN 1092-1
JIS B2238
Diameter (E)
3-in.
4-in.
1 ½-in.
2-in.
3-in. Headbox
4-in. Headbox
DN 80
DN 100
DN 40
DN 50
DN 80 Headbox
DN100 Headbox
80 A
100 A
40 A
50 A
—
—
2.58 (66)
3.50 (89)
1.45 (37)
1.90 (49)
2.875 (74)
3.78 (97)
(1)
112
Dimensions are in inches (millimeters).
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Figure 7. PFW Pancake Seal
A
C
SOCKET HEAD
CAP SCREW
D
B
1.00 (25.4)
M
DIAPHRAGM
GASKET
K
F
L
N
G
FLUSH RING
EN1092-1
ANSI / ASME
Table 63. PFW Pancake Seal Dimensions(1)
EN1092-1
ANSI / ASME
(1)
Flange Thickness
“B”
QTY. of
Bolts
Bolt Circle
“C”
Bolt Hole Size
“D”
Standard
Diaphragm
Diameter “F”
Pipe Size
Class
Flange Diameter
“A”
2-in.
150 lb.
300 lb.
600 lb.
150 lb.
300 lb.
600 lb.
6.00 (152.4)
6.50 (165.1)
6.50 (165.1)
7.50 (190.5)
8.25 (209.6)
8.25 (209.6)
0.69 (17.5)
0.81 (20.6)
1.00 (25.4)
0.88 (22.4)
1.06 (26.9)
1.25 (31.8)
4
8
8
4
8
8
4.75 (120.7)
5.00 (127.0)
5.00 (127.0)
6.00 (152.4)
6.62 (168.1)
6.62 (168.1)
0.750 (19.05)
0.750 (19.05)
0.750 (19.05)
0.750 (19.05)
0.875 (22.23)
0.875 (22.23)
2.30 (58.4)
2.30 (58.4)
2.30 (58.4)
3.50 (88.9)
3.50 (88.9)
3.50 (88.9)
PN40
PN63
PN40
PN63
6.50 (165)
7.09 (180)
7.87 (200)
8.46 (215)
0.79 (20)
1.02 (26)
0.94 (24)
1.10 (28)
4
4
8
8
4.92 (125)
5.31 (135)
6.30 (160)
6.69 (170)
0.71 (18)
0.87 (22)
0.71 (18)
0.87 (22)
2.30 (58)
2.30 (58)
3.50 (89)
3.50 (89)
3-in.
DN 50
DN 80
Dimensions are in inches (millimeters).
Inner
Diameter
“K”
Beveled
Diameter “L”
Thickness
with 1/4-NPT
F.C. “M”
3.62 (92)
3.62 (92)
3.62 (92)
5.00 (127)
5.00 (127)
5.00 (127)
2.12 (54)
2.12 (54)
2.12 (54)
3.60 (91)
3.60 (91)
3.60 (91)
2.48 (63)
2.48 (63)
2.48 (63)
—
—
—
4.00 (102)
4.00 (102)
5.43 (138)
5.43 (138)
2.40 (61)
2.40 (61)
3.60 (91)
3.60 (91)
—
—
—
—
Outer Diameter
“G”
Pipe Size
2-in.
3-in.
DN 50
DN 80
Thickness with
/2-NPT F.C. “M”
Minimum Gasket I.D. “N”
0.97 (25)
0.97 (25)
0.97 (25)
0.97 (25)
0.97 (25)
0.97 (25)
1.30 (33)
1.30 (33)
1.30 (33)
1.30 (33)
1.30 (33)
1.30 (33)
2.51 (64)
2.51 (64)
2.51 (64)
3.70 (94)
3.70 (94)
3.70 (94)
0.97 (25)
0.97 (25)
0.97 (25)
0.97 (25)
1.30 (33)
1.30 (33)
1.30 (33)
1.30 (33)
2.51 (64)
2.51 (64)
3.70 (94)
3.70 (94)
1
113
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Figure 8. FCW Flush Flanged Seal – Ring Type Joint (RTJ) Gasket Surface Two-Piece Design (shown with flushing ring)
ANSI / ASME
Table 64. Dimensional Table for FCW 2-Piece Flange Type Flush Diaphragm Seal(1)
(1)
Pipe Size
Class
Flange
Diameter “A”
Flange
Thickness “B”
Bolt Circle
Diameter “C”
Bolt Hole
Diameter “D”
Overall Height
“H”
Raised Face
Height “J”
2-in.
150 lb.
300 lb.
600 lb.
1500 lb.
2500 lb.
150 lb.
300 lb.
600 lb.
900 lb.
1500 lb.
2500 lb.
6.00 (152)
6.50 (165)
6.50 (165)
8.50 (216)
9.25 (235)
7.50 (191)
8.25 (210)
8.25 (210)
9.50 (241)
10.50 (267)
12.00 (305)
0.69 (18)
0.82 (21)
1.00 (25)
1.50 (38)
2.00 (51)
0.88 (22)
1.06 (27)
1.25 (32)
1.50 (38)
1.88 (48)
2.62 (67)
4.75 (121)
5.00 (127)
5.00 (127)
6.50 (165)
6.75 (171)
6.00 (168)
6.62 (168)
6.62 (168)
7.50 (191)
8.00 (203)
9.00 (229)
0.75 (19)
0.75 (19)
0.75 (19)
1.00 (25)
1.12 (28)
0.75 (19)
0.88 (22)
0.88 (22)
1.00 (25)
1.25 (32)
1.38 (35)
2.43 (61.7)
2.43 (61.7)
2.43 (61.7)
2.57 (65.3)
3.07 (78.0)
2.43 (61.7)
2.43 (61.7)
2.43 (61.7)
2.57 (65.3)
3.07 (78.0)
4.07 (103.4)
0.68 (17.3)
0.68 (17.3)
0.68 (17.3)
0.82 (20.8)
0.82 (20.8)
0.68 (17.3)
0.68 (17.3)
0.68 (17.3)
0.82 (20.8)
0.82 (20.8)
0.82 (20.8)
3-in.
Dimensions are in inches (millimeters).
Pipe Size
ANSI / ASME
2-in.
114
3-in.
RTJ Diameter
“E”
Standard
Diaphragm
Diameter “F”
Outer Diameter
“G”
Inner Diameter
“K”
Thickness with
1
/4-NPT F.C. “L”
Thickness with
1
/2-NPT F.C. “L”
3.250 (83)
3.250 (83)
3.250 (83)
3.750 (95)
4.000 (102)
4.500 (114)
4.875 (124)
4.875 (124)
4.875 (124)
5.375 (137)
5.000 (127)
2.30 (58.4)
2.30 (58.4)
2.30 (58.4)
2.30 (58.4)
3.50 (88.9)
3.50 (88.9)
3.50 (88.9)
3.50 (88.9)
3.50 (88.9)
3.50 (88.9)
3.50 (88.9)
4.00 (102)
4.25 (108)
4.25 (108)
4.88 (124)
5.25 (133)
5.25 (133)
5.75 (146)
5.75 (146)
6.12 (155)
6.62 (168)
6.62 (168)
2.12 (54)
2.12 (54)
2.12 (54)
2.12 (54)
2.12 (54)
3.60 (91)
3.60 (91)
3.60 (91)
3.60 (91)
3.60 (91)
3.60 (91)
1.4 (36)
1.4 (36)
1.4 (36)
1.4 (36)
1.4 (36)
1.5 (38)
1.5 (38)
1.5 (38)
1.5 (38)
1.5 (38)
1.5 (38)
1.7 (43)
1.7 (43)
1.7 (43)
1.7 (43)
1.7 (43)
1.8 (46)
1.8 (46)
1.8 (46)
1.8 (46)
1.8 (46)
1.8 (46)
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Figure 9. RCW Flanged Remote Seal Ring Type Joint (RTJ) and Flushing Connection Ring
A
C
B
H
D
E
F
G
Table 65. RCW Flanged Remote Seal Dimensions(1)
Pipe
Size
Flange Bolt Circle
Thickness Diameter
(B)
(C)
Bolt Hole
Diameter
(D)
Overall Height
(H)
No or 1/4-in.
NPT flush
connection
1/2-in. NPT
flush
connection
1
2500 lb.
5.25 (133.4)
1.19 (30.2)
3.50 (88.9)
0.88 (22.2)
0.62 (15.7)
1.69 (42.9)
2.64 (67.1)
2.88 (73.2)
3.18 (80.8)
3
300/600 lb.
4.62 (117)
0.62 (15.8)
3.25 (82.6)
0.75 (19.1)
0.82 (20.8)
1.69 (42.9)
2.64 (67.1)
2.88 (73.2)
3.18 (80.8)
3
900/1500 lb.
5.12 (130)
1.00 (25.4)
3.50 (88.9)
0.88 (22.2)
0.82 (20.8)
1.75 (44.5)
2.64 (67.1)
2.88 (73.2)
3.18 (80.8)
3
/4-in.
2500 lb.
5.50 (140)
1.25 (31.8)
3.75 (95.3)
0.88 (22.2)
0.82 (20.8)
2.00 (50.8)
2.90 (73.7)
2.88 (73.2)
3.18 (80.8)
1-in.
150 lb.
4.25 (108)
0.50 (12.7)
3.12 (79.3)
0.625 (15.9)
1.05 (26.7)
1.88 (47.6)
2.64 (67.1)
2.88 (73.2)
3.18 (80.8)
1-in.
300 lb.
4.88 (124)
0.62 (15.8)
3.50 (88.9)
0.75 (19.1)
1.05 (26.7)
2.00 (50.8)
2.77 (70.4)
2.88 (73.2)
3.18 (80.8)
1-in.
600 lb.
4.88 (124)
0.69 (17.5)
3.50 (88.9)
0.75 (19.1)
1.05 (26.7)
2.00 (50.8)
2.77 (70.4)
2.88 (73.2)
3.18 (80.8)
1-in.
900/1500 lb.
5.88 (149)
1.12 (28.5)
4.00 (102)
1.00 (25.4)
1.05 (26.7)
2.00 (50.8)
2.83 (71.9)
2.88 (73.2)
3.18 (80.8)
1-in.
2500 lb.
6.25 (159)
1.38 (35.1)
4.25 (108)
1.00 (25.4)
1.05 (26.7)
2.38 (60.3)
3.27 (83.1)
2.88 (73.2)
3.18 (80.8)
11/2-in.
150 lb.
5.00 (127)
0.62 (15.8)
3.88 (98.6)
0.63 (15.9)
1.61 (40.9)
2.56 (65.1)
3.27 (83.1)
2.88 (73.2)
3.18 (80.8)
11/2-in.
300 lb.
6.12 (155)
0.75 (19.1)
4.50 (114)
0.88 (22.2)
1.61 (40.9)
2.69 (68.3)
3.58 (90.9)
2.88 (73.2)
3.18 (80.8)
11/2-in.
600 lb.
6.12 (155)
0.88 (22.4)
4.50 (114)
0.88 (22.2)
1.61 (40.9)
2.69 (68.3)
3.58 (90.9)
2.88 (73.2)
3.18 (80.8)
11/2-in.
900/1500 lb.
7.00 (178)
1.25 (31.8)
4.88 (123.9)
1.13 (28.6)
1.61 (40.9)
2.69 (68.3)
3.64 (92.5)
2.88 (73.2)
3.18 (80.8)
11/2-in.
2500 lb.
8.00 (203)
1.75 (44.5)
5.75 (146)
1.25 (31.8)
1.61 (40.9)
3.25 (82.6)
4.52 (115)
2.88 (73.2)
3.18 (80.8)
/2-in.
/4-in.
/4-in.
ANSI / ASME
Class
Flange
Diameter
(A)
Lower
Lower
Housing
Housing
Inner
Outer
Diameter
Diameter
RTJ
(E)
(G)
Groove (F)
(1) Dimensions are in inches (millimeters).
115
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Figure 10. FUW Flush Flanged Type Seal - EN1092-1 Type D
A
C
B
D
L
F
K
J
G
EN 1092-1
Table 66. FUW Flush Flanged Type Seal Dimensions(1)
Flange
Diameter
“A”
Flange
Thickness
“B”
Bolt
Circle
“C”
Standard
Diaphragm
Bolt
Diameter
Diameter
“D”
Bolts “F”
Raised
Face
Diameter
“G”
Groove
O.D.
“J”
Groove
I.D.
“K”
Groove
Depth
“L”
Pipe
Size
Class
DN 50
PN 40
6.50 (165)
0.79 (20)
4.92 (125)
0.71 (18)
4
2.30 (58)
4.00 (102)
3.46 (88)
2.83 (72)
0.16 (4.0)
PN 40
7.87 (200)
0.94 (24)
6.30 (160)
0.71 (18)
8
3.50 (89)
5.43 (138)
4.76 (121)
4.13 (105)
0.16 (4.0)
DN 80
(1) Measurement in inches (millimeters).
Figure 11. FVW Flush Flanged Type Seal - EN1092-1 Type C
A
C
B
D
L
F
K
J
EN 1092-1
Table 67. FVW Flush Flanged Type Seal Dimensions(1)
Pipe
Size
Class
Flange
Diameter
“A”
Bolt Circle
“C”
Bolt
Diameter
“D”
Bolts
Standard
Tongue
Diaphragm
O.D.
Diameter “F” “J”
Tongue
I.D.
“K”
Tongue
Height
“L”
DN 50
PN 40
6.50 (165)
0.79 (20)
4.92 (125)
0.71 (18)
4
2.30 (58)
3.43 (87)
2.87 (73)
0.18 (4.5)
DN 80
PN 40
7.87 (200)
0.94 (24)
6.30 (160)
0.71 (18)
8
3.50 (89)
4.72 (120)
4.17 (106)
0.18 (4.5)
(1) Measurement in inches (millimeters).
116
Flange
Thickness
“B”
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Figure 12. RTW Threaded Seal
A
B
Process Connection
Dimensions are in inches (millimeters)
Table 68. RTW Threaded Seal Dimensions(1)
Rating
Overall Diameter (A)
Overall Height (B)
1/4-in.
2500 psi (172 bar)
5000 psi (345 bar)
10000 psi (690 bar)
No or
NPT flush connection
2.47 (62.7)
1.95 (49.5)
1.95 (49.5)
3.74 (95.0)
3.74 (95.0)
4.00 (101.6)
1/2-in.
NPT flush connection
2.82 (71.6)
2.31 (58.6)
—
(1) Dimensions are in inches (millimeters).
Figure 13. HTS Threaded Flush Type Seal
Table 69. HTS Threaded Flush Type Seal Dimensions(1)
Process Type
Connection Size
Outer Diameter (A) Diaphragm Diameter (B)
Length (C)
Overall Height (D)
ANSI NPT
1-in. NPT
11/2-in. NPT
2-in. NPT
G1 BSP
G11/2 BSP
G2 BSP
2.03 (51.6)
2.36 (59.9)
2.74 (69.6)
2.03 (51.6)
2.36 (59.9)
2.74 (69.6)
1.24 (31.5)
1.24 (31.5)
1.24 (31.5)
0.87 (22.0)
0.98 (24.9)
1.24 (31.5)
2.50 (63.5)
2.50 (63.5)
2.50 (63.5)
2.15 (54.6)
2.24 (56.9)
2.50 (63.5)
EN 10226 BSP
1.10 (27.9)
1.70 (43.2)
1.90 (48.3)
1.10 (27.9)
1.70 (43.2)
1.90 (48.3)
(1) Dimensions are in inches (millimeters).
117
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Figure 14. SCW Tri-Clamp Seal
11/2-IN. SIZE
21/2, 3, AND 4-IN. SIZE
1.30 33.0
1.30 33.0
C
C
B
B
A
A
2-IN. SIZE
1.30 33.0
R
C
B
A
37-01
74
Table 70. SCW Tri-Clamp Seal Dimensions(1)
Pipe Size
1
1 /2-in.
2-in.
21/2-in.
3-in.
4-in.
Outer Diameter (A)
O-rIng Groove Diameter (B)
Diaphragm Diameter (C)
2.000 (50.80)
2.500 (63.50)
3.047 (77.39)
3.580 (90.93)
4.680 (118.87)
1.720 (43.69)
2.220 (56.39)
2.780 (70.61)
3.280 (83.31)
4.350 (110.49)
1.214 (30.84)
1.675 (42.55)
2.072 (52.63)
2.582 (65.58)
3.662 (93.01)
(1) Dimensions are in inches (millimeters).
118
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Figure 15. SSW Tank Spud Seal
5.22 132.6
1.64 41.8
A
3.63 92.2
3.93 99.8
0.50 12.7
A
R
3.70 [93.9]
37-01
74
5.98 151.9
Table 71. SSW Tank Spud Seal Dimensions(1)
Pipe Size
Length
A
4-in. SCH 5
2-in. Long
6-in. Long
2.10 (53.3)
6.10 (154.9)
(1) Dimensions are in inches (millimeters).
119
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Figure 16.
STW Hygienic Thin Wall Tank Spud Seal
4.68 118.9
1.07 27.2
0.76 19.3
R
2.96 75.1
37-01
74
3.34 84.9
Dimensions are in inches (millimeters)
Figure 17. EES Hygienic Flanged Tank Spud Extended Seal
A
C
2.93 74.5
B
0.98 25.0
F
R
D
37-01
E
74
Table 72. EES Hygienic Flanged Tank Spud Extended Seal Dimensions(1)
Pipe Size
A
B
Bolts
C
D
E
F
DN50
DN80
6.50 (165.0)
7.87 (200.0)
0.79 (20.0)
0.94 (24.0)
4
8
4.92 (125.0)
6.30 (160.0)
2.99 (76.0)
4.04 (102.7)
3.24 (82.3)
4.24 (107.8)
0.55 (14.0)
0.55 (14.0)
(1) Dimensions are in inches (millimeters).
120
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Figure 18. VCS Tri-clamp In-Line Seal
A
B
C
D
R
37-01
74
E
Table 73. VCS Tri-clamp In-Line Seal Dimensions(1)
Pipe Size
A
B
C
D
E
1-in.
1½-in.
2-in.
3-in.
4-in.
0.870 (22.10)
1.370 (34.80)
1.870 (47.50)
2.870 (72.90)
3.820 (97.03)
1.720 (43.69)
1.720 (43.69)
2.220 (56.39)
3.280 (83.31)
4.350 (110.49)
1.990 (50.55)
1.990 (50.55)
2.520 (64.01)
3.580 (90.93)
4.690 (119.13)
2.28 (57.9)
2.73 (69.3)
3.19 (81.0)
4.14 (105.2)
5.06 (128.5)
3.54 (90.0)
3.54 (90.0)
3.54 (90.0)
3.54 (90.0)
3.54 (90.0)
(1) Dimensions are in inches (millimeters).
Figure 19. SVS Varivent Compatible Connection Seal
3.3 84
0.48 12.2
0.664 16.87
R
37-01
74
2.51 63.8
SHP Cherry-Burrell “I” Line Seal
37°
0.65 16.5
0.31 7.9
R
B
A
37-01
Table 74. SHP Cherry-Burrell “I” Line Seal Dimensions(1)
Size
A
B
2-in.
3-in.
2.640 (67.06)
3.875 (98.43)
2.240 (56.90)
3.305 (83.95)
(1) Dimensions are in inches (millimeters).
121
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Figure 20. SLS Hygienic Dairy Process Connection Female Thread Seal per DIN 11851
R
37-01
Table 75. SLS Hygienic Dairy Process Connection Female Thread Seal per DIN 11851 Dimensions(1)
Female Thread Process Size / Rating A
B
Thread (C)
D
E
DIN 11851
2.20 (56.0)
2.70 (68.5)
Rd 65 X 1/6-in.
Rd 78 X 1/6-in.
1.18 (30.0)
1.22 (31.0)
0.39 (10.0)
0.43 (11.0)
DN 40 PN 40
DN 50 PN 25
1.89 (48.0)
2.40 (61.0)
(1) Dimensions are in inches (millimeters).
Figure 21. WSP Saddle Seal
3.50 88.9
3.50 88.9
D
D
1.00 25.4
1.00 25.4
A
A
B
B
C
C
Dimensions are in inches (millimeters)
Table 76. WSP Saddle Seal Dimensions
(1)
D
Size
A
B
C
6 Bolts
8 Bolts
2-in.
3-in.
4-in. and larger
2.72 (69.1)
2.46 (62.5)
2.60 (66.0)
1.50 (38.1)
2.01 (51.1)
2.01 (51.1)
2.50 (63.5)
3.02 (76.7)
3.00 (76.1)
2.99 (75.9)
2.99 (75.9)
2.99 (75.9)
2.91 (78.0)
2.91 (78.0)
2.91 (78.0)
(1) Dimensions are in inches (millimeters).
122
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Figure 22. UCP and PMW Threaded Pipe Mount Seals
B
A
1.550 39.37
1.92 48.8
0.060 1.52
C
D
E
0.82 20.8
1.00 25.4
A
UCP THREADED TYPE
5/16-18NF HEX
HEAD CAP SCREW
C
PMW SLEEVE TYPE
THREADED PIPE MOUNT (UCP AND PMW) SEALS
Dimensions are in inches (millimeters)
Table 77. UCP and PMW Threaded Pipe Mount Seals Dimensions(1)
Size
Diameter (A)
Diameter (B)
Diameter (C)
Diameter (D)
Diameter (E)
Sleeve 1-in. Pipe
Threaded M44 X 1.25
1.50 (38.1)
2.37 (60.2)
—
1.38 (35.1)
1.32 (33.5)
1.59 (40.4)
0.85 (21.6)
—
1.05 (26.7)
—
(1) Dimensions are in inches (millimeters).
Figure 23. CTW Chemical Tee Seal
4.99 126.7
4.375 111.13
1.00 25.4
0.50 12.7
0.33 8.3
3.50 89.0
3.78 95.9
Dimensions are in inches (millimeters)
123
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Figure 24. TFS Wafer Style In-Line Seal
C
A
B
3.54 90.0
Table 78. TFS Wafer Style In-Line Seal Dimensions(1)
Pipe Size
A
B
C
1-in.
11/2-in.
2-in.
21/2-in.
3-in.
4-in.
DN25
DN40
DN50
DN80
DN100
2.00 (50.8)
2.88 (73.2)
3.62 (91.9)
4.12 (104.6)
5.00 (127.0)
6.00 (152.4)
2.68 (68.0)
3.46 (88.0)
4.02 (102.0)
5.43 (138.0)
6.38 (162.0)
2.64 (67.0)
3.23 (82.0)
3.74 (95.0)
4.21 (107.1)
5.00 (127.0)
6.00 (152.4)
2.72 (69.0)
3.46 (88.0)
4.09 (104.0)
5.47 (139.0)
6.46 (164.0)
1.090 (27.69)
1.614 (41.00)
2.070 (52.58)
2.480 (62.99)
3.070 (77.98)
4.000 (101.60)
1.090 (27.69)
1.614 (41.00)
1.992 (50.60)
3.236 (82.19)
4.216 (107.09)
(1) Dimensions are in inches (millimeters).
Figure 25. WFW Flow-Thru Flanged Seal
A
B
D
C
2.415 61.34
E
F
Dimensions are in inches (millimeters)
Table 79. WFW Flow-Thru Flanged Seal Dimensions (1)
Class (lb.)
150
Nominal
Pipe Size
(in.)
Overall Length Upper to
± 0.05
Centerline Height
A
B
C
D
E
F
1
2
3
7.00 (177.8)
9.00 (228.6)
11.00 (279.4)
2.28 (57.91)
3.21 (81.6)
3.50 (88.9)
3.12 (79)
4.75 (121)
6.00 (152)
4.25 (108)
6.00 (152)
7.50 (191)
0.62 (16)
0.75 (19)
0.75 (19)
0.50 (13)
0.69 (18)
0.88 (22)
(1) Dimensions are in inches (millimeters).
124
Bolt Circle
Diameter
Outside Diameter
Bolt Hole
Flange
Thickness
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
125
Product Data Sheet
00813-0100-4016, Rev LA
January 2011
Rosemount DP Level
Rosemount Level Solutions
Emerson provides a complete range of Rosemount products for level measurement applications.
Pressure – Level or Interface Measurement
Non-contacting Radar – Level Measurement
Emerson has a complete line of Rosemount pressure
transmitters and remote seals for measuring level or interfaces
in liquid applications. Optimize performance with direct mount,
Tuned Seal systems:
The Rosemount non-contacting radar family consists of:
• Rosemount 3051SAL, 3051L, and 2051L Liquid Level
Transmitters
• Rosemount 1199 Remote Diaphragm Seals with direct mount
or capillary connections
Vibrating Fork Switches – Point Level Detection
The Rosemount 2100 Series is developed for reliable point level
detection of liquids and consists of:
• Rosemount 2110 Compact Vibrating Fork Liquid Level Switch
• Rosemount 2120 Full-featured Vibrating Fork Liquid Level
Switch
• Rosemount 5400 Series Transmitters – Loop-powered superior
performance transmitter with a wide range of antennas, for
liquid level measurement in most applications and process
conditions.
• Rosemount 5600 Series Transmitters – Power of 4-wire give
maximum sensitivity and performance for solids, challenging
reactors, rapid level changes and excessive process
conditions.
Non-contacting Ultrasonic – Level Measurement
The Rosemount 3100 Series ultrasonic level transmitters provide
continuous non-contacting level measurement of liquids. The
range consists of:
• Rosemount 3101 for simple continuous level measurement
Guided Wave Radar – Level and Interface Measurement
• Rosemount 3102 for continuous measurement with two integral
relays for local control functionality
Multivariable, loop-powered Guided Wave Radar transmitters
with a wide range of probe styles to fit different liquids and solids
applications. The product line consists of:
• Rosemount 3105 Intrinsically safe certified version for
hazardous areas
• Rosemount 3300 Series – Versatile and easy-to-use
transmitter with proven reliability
• Rosemount 5300 Series – Accurate, superior performance
transmitter with FOUNDATION™ fieldbus support
Standard Terms and Conditions of Sale can be found at www.rosemount.com\terms_of_sale
The Emerson logo is a trade mark and service mark of Emerson Electric Co.
Rosemount , Instrument Toolkit, and the Rosemount logotype are registerd trademarks of Rosemount Inc.
Coplanar and Tuned-System Assemblies are trademarks of Rosemount Inc.
Instrument Toolkit is a registered trademark of Emerson Process Management.
Varivent is a registered trademark of Tuchenhagen GmbH.
Flourocarbon (FMK) and Teflon are registered trademarks of E.I. duPont de Nemours & Co.
Syltherm, and D.C. are regiastered trademarks of Dow Corning Corp.
Tri-Clamp is a registered trademark of Tri-Clover, Inc. of the Alfa-Laval Group.
Thermo-Tork is a registered trademark of Armstron World Industries, Inc.
Neobee M-20 is a registered trademark of Stepan Chemical Co.
Windows is a registered trademark of Microsoft Corp.
Cherry-Burrell is a trademark of the United Dominion Industries.
The 3-A symbol is a registered trademark of the 3-A Sanitary Standards Symbol Council.
Many other special order transmitter/seal configurations, materials and fill fluids are available that are not covered in this document. Contact
your Rosemount representative or consult factory for additional information.
Emerson Process Management
Rosemount Measurement
8200 Market Boulevard
Chanhassen MN 55317 USA
Tel (USA) 1 800 999 9307
Tel (International) +1 952 906 8888
Fax +1 952 949 7001
00813-0100-4016 Rev LA, 1/11
Emerson Process Management
Blegistrasse 23
P.O. Box 1046
CH 6341 Baar
Switzerland
Tel +41 (0) 41 768 6111
Fax +41 (0) 41 768 6300
Emerson FZE
P.O. Box 17033
Jebel Ali Free Zone
Dubai UAE
Tel +971 4 811 8100
Fax +971 4 886 5465
Emerson Process Management Asia Pacific
Pte Ltd
1 Pandan Crescent
Singapore 128461
Tel +65 6777 8211
Fax +65 6777 0947
Service Support Hotline : +65 6770 8711
Email : [email protected]
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement