HP 4410t Mobile Thin Client
QuickSpecs
HP 4410t Mobile Thin Client
Overview
1.
2.
3.
4.
5.
6.
7.
8.
WLAN antennas
Integrated microphone
HP Info Center button with LED indicator
Power button with LED indicator
Stereo speakers
Battery charging LED indicator
Power connector
Optical drive
1. ExpressCard/34 slot
2. (2) USB 2.0 ports
3. HDMI port
9.
10.
11.
12.
13.
14.
15.
16.
RJ-11/modem port
(2) USB 2.0 ports
Touchpad
Stereo microphone in
Stereo headphone/line out
Media Card Reader
Wireless switch with LED indicator
Internal Storage Activity LED
4. VGA connector (external monitor/projector)
5. RJ-45/Ethernet port
6. Kensington Lock slot
DA - 13372 Worldwide QuickSpecs — Version 4 — 7.17.2009
Page 1
QuickSpecs
HP 4410t Mobile Thin Client
Overview
1. Battery release latches
2. Battery bay
At A Glance
Genuine Windows Embedded Standard featuring File Based Write Filter, Enhanced Write Filter, RDP 6.1, Internet
Explorer 7, Windows Media Player 11
Intel® Celeron® processor
1 GB or 2 GB Solid State Module for durability and increased battery life
Integrated 802.11 a/b/g/n draft 2.0 or b/g wireless connectivity
Thin, lightweight design starting at 4.3 lb/1.95 kg and 1.22 in/31.0 mm thin at front
Full-sized spill-resistant keyboard
Widescreen 14.0-inch diagonal HD LED-backlit display with 16:9 aspect ratio
Integrated Media Card Reader
VGA and HDMI ports for dual external-monitor support
Optional integrated DVD-ROM drive
Compatible with HP USB 2.0 Docking Station and HP Essential USB Port Replicator
DA - 13372 Worldwide QuickSpecs — Version 4 — 7.17.2009
Page 2
QuickSpecs
HP 4410t Mobile Thin Client
Standard Features
Processors
Intel Celeron Processor 575 (2.00 GHz, 1 MB L2 cache, 667 MHz FSB)*
NOTE: Processor speed denotes maximum performance mode; processors will run at lower
speeds in battery optimization mode.
* Intel's numbering is not a measurement of higher performance.
Operating System
Preinstalled
Supported
Chipset
Mobile Intel GL40 Express Chipset , 667 MHz front side bus
Graphics
Mobile Intel Graphics Media Accelerator 4500MHD integrated graphics with up to 512 MB of
shared video memory
Microsoft DirectX 9 capable
Display
Internal
External
Memory
Standard
Communications
Marvell Ethernet (10/100/1000 NIC)*
56K V.92 modem**
* The term "10/100/1000" or "Gigabit" Ethernet indicates compliance with IEEE standard 802.3ab
for Gigabit Ethernet, and does not connote actual operating speed of 1 Gb/s. For high-speed
transmission, connection to a Gigabit Ethernet server and network infrastructure is required.
** Designed for downloads from 56K modem compliant sources. Maximum achievable download
transmission rates currently do not reach 56 KB/s, and will vary with line conditions. Modem
availability is subject to country regulatory approval.
Genuine Windows Embedded Standard
Genuine Windows XP Embedded SP3
14.0-inch diagonal LED-backlit HD anti-glare (1366 x 768 resolution)
Up to 32-bit per pixel color depth
VGA port supports resolutions up to 1600 x 1200 at 75 Hz, and lower
resolutions at up to 100 Hz.
HDMI 1.3 port supports direct connection to high-definition displays with
up to 1920 x 1080 resolution and 7-channel audio with one convenient
cable (not included).
NOTE: Resolutions are dependent upon monitor capability, and
resolution and color depth settings.
800 MHz DDR2 SDRAM; two slots supporting dual channel memory
1 GB or 2 GB
Maximum
Upgradeable to 3 GB
Dual-channel
Maximized dual-channel performance requires SODIMMs of the same
size and speed in both memory slots.
NOTE: Due to the non-industry standard nature of some third-party memory modules, we
recommend HP branded memory to ensure compatibility. If you mix memory speeds, the system
will perform at the lower memory speed.
DA - 13372 Worldwide QuickSpecs — Version 4 — 7.17.2009
Page 3
QuickSpecs
HP 4410t Mobile Thin Client
Standard Features
Wireless Devices
Secure, integrated wireless LAN options featuring support for the latest industry standards.
Wireless LAN is factory configurable only.
All 802.11 integrated
Wi-Fi certified*
wireless LAN options Wired Equivalent Privacy (WEP) support up to 128-bit keys
Wi-Fi Protected Access (WPA) and WPA2 support
802.1x authentication support, including EAP-TLS, EAP-TTLS, PEAPGTC, PEAP-MSCHAPv2, and LEAP
Advanced Encryption Standard (AES) support
Dual antennas integrated in the display enclosure
Broadcom 4322AGN
Integrated support for 802.11a, b, g, and n draft 2.0*
802.11a/b/g/draft-n Wi- Cisco Compatible Extensions support
Fi Adapter
Up to 300 mbps data rate
Broadcom 4312G
Integrated support for 802.11 b and g
802.11b/g
Cisco Compatible Extensions support
WiFi Adapter
Up to 54 mbps data rate
* The specifications for 802.11n draft 2.0 are draft specifications and are not final. If the final
specifications differ from the draft specifications, it may affect the ability of the notebook to
communicate with other 802.11n WLAN devices.
Keyboard
The HP spill-resistant keyboard is designed using a Mylar film that minimizes the risk of damage
to sensitive components underneath. The 101/102-key compatible keyboard features a full-pitch
key layout with desktop keyboard features, such as the isolated inverted-T cursor control keys,
editing keys, both left and right control and alt keys, and 12 function keys. US and International
key layouts are available. Other features include hotkeys for instant access to power conservation
and brightness, and 19.05 x 19.05 mm key pitch (center-to-center spacing).
Pointing device
Touchpad, two pick buttons
Expansion card slots
ExpressCard/34 slot
Media Card Reader
Storage
Internal Storage Device1 GB or 2 GB Solid State Module
Optional Fixed Optical DVD-ROM Drive
Drive
Interfaces
External monitor
One (VGA)
HDMI
One - 1.3 compliant
Stereo microphone in One
Stereo headphone/line One
out
Power connector
One
RJ-11/modem
One
RJ-45/Ethernet
One
USB 2.0
Four
LED status indicators Seven
Supports ExpressCard/34 (34 mm x 75 mm x 5 mm) card sizes
Supports SD (Secure Digital), MMC (MultiMedia Card), Memory Stick,
Memory Stick Pro, Memory Stick Duo*, xD-Picture card
* Memory Stick Duo Adapters are required and sold separately. Inserting a Memory Stick Duo
Card directly into your notebook could damage the memory card and/or notebook.
DA - 13372 Worldwide QuickSpecs — Version 4 — 7.17.2009
Page 4
QuickSpecs
HP 4410t Mobile Thin Client
Standard Features
Audio/Visual
High Definition Audio support
Integrated stereo speakers
Integrated microphone
Stereo headphone/line out
Stereo microphone in
Software
(Preinstalled)
Enhanced Write Filter
File Based Write Filter
Internet Explorer 7
Windows Media Player 11
TeemTalk Emulation
Microsoft Remote Desktop Protocol (RDP) 6.1
Microsoft Firewall
Citrix XenApp 11
VMWare View 3.1
WinDVD
Manageability Solution HP ThinState Tools
HP Device Manager
HP Client Automation
Altiris Deployment Solution (Full License)
HP Virtual Client
HP Remote Desktop Protocol Enhancements
Essentials
HP Remote Graphics Software (RGS)
HP Session Allocation Manager (SAM)
Additional software
.NET Framework 2.0
available from the web Universal Print Driver (UPD)
Adobe Acrobat Reader
Citrix XenDesktop
Broadcom Wireless Utility
Security
Standard Features
Power Supply
External 65-watt Smart AC adapter, 6-foot (1.8-meter) power cord included; total length including
external AC adapter is 12 feet (3.66 meter)
HP Fast Charge*
* HP Fast Charge recharges your battery up to 90% within 90 minutes when the system is off.
Battery
Primary battery
Setup Password
Power-On Password
Kensington Lock Slot
HP Privacy Filter (must be purchased separately)
6-cell (47 WHr) Li-Ion battery
Battery Life
Primary battery
Up to 4.5 hours
NOTE: Battery life will vary depending on the product configuration, product model, applications
loaded on the product, power management settings of the product, and the product features used
by the customer. As with all batteries, the maximum capacity of this battery will decrease with time
and usage.
System Standby Time Up to 1 week
Power Conservation
Standby
ACPI compliance
DA - 13372 Worldwide QuickSpecs — Version 4 — 7.17.2009
Page 5
QuickSpecs
HP 4410t Mobile Thin Client
Standard Features
Docking
HP USB 2.0 Docking Station
Uses a single USB cable to pass through video, audio, LAN, and USB signals. Allows easy
connection of a monitor, mouse, external keyboard, printer, LAN cable, speakers and other
accessories. Connect up to four concurrently working USB devices.
HP Essential USB Port Replicator
Uses a single USB cable to pass through audio, LAN, and USB signals. Allows easy connection of
a mouse, external keyboard, printer, LAN cable, speakers and other accessories. Connect up to
five concurrently working USB devices.
Service and Support
HP Services includes a one-year standard parts and labor warranty, pick-up or carry-in, and tollfree 7 x 24 hardware technical phone support (depending on model). Warranty upgrades are also
available. HP Care Pack Services extend service contracts beyond the standard warranties. To
choose the right level of service for your HP product, use the HP Care Pack Services Lookup Tool
at: http://www.hp.com/go/lookuptool. Additional HP Care Pack Services information by product is
available at: http://www.hp.com/hps/carepack.
NOTE: Certain restrictions and exclusions apply. Consult the HP Customer Support Center for
details.
http://h20000.www2.hp.com/bizsupport/TechSupport/ProductRoot.jsp.
DA - 13372 Worldwide QuickSpecs — Version 4 — 7.17.2009
Page 6
QuickSpecs
HP 4410t Mobile Thin Client
Options
Memory
HP 1 GB (DDR2 800 MHz) SODIMM
HP 2 GB (DDR2 800 MHz) SODIMM
KT292AA
KT293AA
Expansion
HP USB 2.0 Docking Station
HP Essential USB Port Replicator
HP Basic Adjustable Stand
FQ834AA
AQ731AA
AL549AA
Power
HP 65W Smart AC Adapter
HP 90W Smart Combo Adapter
Carrying Cases
HP Basic Carrying Case
HP Basic Backpack
HP Basic Messenger
HP Value Nylon Case
AJ078AA
AM863AA
AP355AA
RR314AA
HP Universal Nylon Case
HP Executive Leather Case
HP Deluxe Nylon Backpack
HP Deluxe Roller Case
RR315AA
RR316AA
RR317AA
GD405AA
Security
HP/Kensington MicroSaver Security Lock
HP Privacy Filter
Input/Output Devices
HP USB Keyboard & Mouse Bundle
HP USB/PS2 Optical 2-Button Scroll Mouse
HP USB Optical Travel Mouse
HP Mobile Audio Speakers
DA - 13372 Worldwide QuickSpecs — Version 4 — 7.17.2009
ED494AA#xxx
AJ652AA#xxx
PC766A
TBD
RC465AA#xxx
DC369A
RH304AA
FS944AA
Page 7
QuickSpecs
HP 4410t Mobile Thin Client
Memory
800 MHz DDR2 SDRAM
Two DIMM slots supporting dual channel memory
DIMM sizes supported: 1 GB and 2 GB
Standard Memory
Optional Memory
Upgrades
1 GB (1 GB x 1)
2 GB (2 GB x 1)
Support for up to 3 GB of memory with the installation of optional DDR2 SDRAM memory kits.
Both memory slots are user accessible. Please refer to the Hardware and Software Guide for
installation procedures. Maximized dual-channel performance requires SODIMMs of the same size
and speed in both memory slots.
Up to
Slot 1
Slot 2
2 GB
1 GB
1 GB
3 GB
2 GB
1 GB
NOTE: This chart does not represent all possible memory configurations. Due to the non-industry standard nature of some
third-party memory modules, we strongly recommend using only HP branded memory modules to ensure compatibility. If you
mix memory speeds, the system will perform at the lower memory speed. With Windows 32-bit operating systems, the
amount of usable memory is dependent upon your configuration, so that above 3 GB all memory may not be available due to
system resource requirements.
Memory Upgrades
HP 1 GB (DDR2 800 MHz) SODIMM
HP 2 GB (DDR2 800 MHz) SODIMM
DA - 13372 Worldwide QuickSpecs — Version 4 — 7.17.2009
KT292AA
KT293AA
Page 8
QuickSpecs
HP 4410t Mobile Thin Client
Storage
Removable Media Drive Support
DVD-ROM Drive
Quantity Supported
One
Drive Bay
Fixed optical drive bay
Internal Storage Device
Quantity Supported
1 GB Solid State Module One
2 GB Solid State Module One
Drive Bay
Hard Drive Bay
Hard Drive Bay
DA - 13372 Worldwide QuickSpecs — Version 4 — 7.17.2009
Page 9
QuickSpecs
HP 4410t Mobile Thin Client
Technical Specifications
System Unit
Dimensions (HxWxD)
1.22 in (at front) x 13.2 in x 9.15 in
31.0 mm (at front) x 336 mm x 232.4 mm
Weight
Starting at 4.3 lb (1.95 kg)
NOTE: Height varies depending upon where on the notebook the measurement is made. Weight
varies by configuration and components.
Stand-Alone Power
Nominal Operating
18.5 V
Requirements
Voltage
(AC Power)
Average Operating
18.5 W
Power
Max Operating Power
< 65W
Temperature
Operating
32° to 95° F (0° to 35° C) (not writing optical)
41° to 95° F (5° to 35° C) (writing optical)
Non-operating
–4° to 140° F (–20° to 60° C)
Cooling
Active
Relative Humidity
Operating
10% to 90%, non-condensing
Non-operating
5% to 95%, 101.6° F (38.7° C) maximum wet
bulb temperature
Shock
Operating
125 G, 2 ms, half-sine
Non-operating
200 G, 2 ms, half-sine
Random Vibration
Operating
0.75 grms
Non-operating
1.50 grms
Altitude
Operating
–50 to 10,000 ft (–15.24 to 3,048 m)
(unpressurized)
Non-operating
–50 to 40,000 ft (–15.24 to 12,192 m)
Industry Standard
UL
Yes
Certifications
CSA
Yes
FCC Compliance
Yes
ICES
Yes
Australia / NZ A-Tick
Yes
Compliance
CCC
Yes
Japan VCCI Compliance Yes
MIC
Yes
BSMI
Yes
CE Marking Compliance Yes
BNCI or BELUS
Yes
CIT
Yes
GOST
Yes
Saudi Arabian
Yes
Compliance (ICCP)
SABS
Yes
UKRSERTCOMPUTER Yes
For accessibility information on HP products, please visit: http://www.hp.com/accessibility.
DA - 13372 Worldwide QuickSpecs — Version 4 — 7.17.2009
Page 10
QuickSpecs
HP 4410t Mobile Thin Client
Technical Specifications
HP 65W Smart AC
Adapter
Dimensions
Weight
Input
4.17 x 1.85 x 1.1 in (10.6 x 4.7 x 2.8 cm)
0.62 lb (280 g)
100 to 240 VAC
Input Efficiency
83% min at 115 VAC
Input frequency range
47 to 63 Hz
Input AC current
1.7 A at 90 VAC, 0.85 A at 180 VAC
Output
Output power 65W
65W
DC output
18.5V
Hold-up time
5 msec at 115 VAC inputOutput current limit
Output current limit
<11A, Over voltage protection- 29V max
automatic shutdown
Connector
3 pin/grounded, mates with interchangeable cords
Environmental Design Operating temperature 32° to 104° F (0° to 40° C)
Non-operating (storage) –4° to 149° F (–20° to 65° C)
temperature
Altitude
0 to 10,000 ft (0 to 3,048 m)
Humidity
20% to 80%
EMI and Safety
Certifications
6-Cell (47 WHr)
Lithium-Ion battery
Dimensions (H x W x L)
Weight
Cells/Type
Energy
Temperature
Battery Re-Charge
Time
Storage Humidity
10% to 90%
CE Mark – full compliance with LVD and EMC directives; Worldwide
safety standards – IEC60950, EN60950, UL60950, Class1, SELV;
Agency approvals – C-UL-US, NORDICS, DENAN, EN55022 Class B,
FCC Class B, CISPR22 Class B, CCC, NOM-1 NYCE; MTBF – over
200,000 hours at 25°C ambient condition.
0.8 x 2.3 x 8.0 in (2.0 x 5.8 x 20.3 cm)
0.710 lb (0.322 kg)
6-cell Lithium-Ion
Watt-hour Capacity
47 WHr
Operating (Charging)
32° to 113° F (0° to 45° C)
Operating (Discharging) 14° to 140° F (–10° to 60° C)
Non-operating
–4° to 140° F (–20° to 60° C)
System in OFF mode or 2.5 hours
Standby
System ON
3 to 5 hours (depending on system power
consumption)
HP Fast Charge
Charges the battery up to 90% within 90
Technology
minutes when system is OFF
Displays
DA - 13372 Worldwide QuickSpecs — Version 4 — 7.17.2009
Page 11
QuickSpecs
HP 4410t Mobile Thin Client
Technical Specifications
14.0-inch LED-backlit
HD (1366 x 768)
anti-glare
Active Area (W x H)
Diagonal Size
Surface Treatment
Contrast Ratio
Refresh Rate
Brightness
Pixel Resolution
Backlight
PPI
Viewing Angle
12.16 x 6.85 in (30.9 x17.4 cm)
14.0 in (35.6 cm)
Anti-glare
300:1 (typical)
60 Hz
200 nit (typical)
Pitch
0.226 mm
Format
1366 x 768
Configuration
RGB Stripe
LED
112 ppi
±30° Horizontal, ±10° Vertical (minimum)
30/30/20/10 (Left/Right/Down/Up) (minimum) or
45/45/35/25 (Left/Right/Down/Up) (typical)
Internal Storage Devices
1 GB Solid State
Module (SSM)
Interface
Connector
Capacities
Transfer mode
Sustained Read
Sustained Write
ECC Support
Low Power
Consumption (5.0V)
Product types
Orientation
2 GB Solid State
Module (SSM)
Interface
Connector
Capacities
Transfer mode
Sustained Read
Sustained Write
ECC Support
Low Power
Consumption (5.0V)
Product types
Orientation
SATA II, 3.0 Gbps
7-pin SATA male connector
15-pin SATA power connector
1 GB
up to PIO mode-4, Multiword DMA mode-2, UDMA mode-5
up to 45 MB/sec
up to 20 MB/sec
up to 8 bits correction per 512 bytes (BCH)
Active mode: 260 mA
Idle mode: 120 mA
Serial ATA 2.5
180D
SATA II, 3.0 Gbps
7-pin SATA male connector
15-pin SATA power connector
2 GB
up to PIO mode-4, Multiword DMA mode-2, UDMA mode-5
up to 54 MB/sec
up to 33 MB/sec
up to 8 bits correction per 512 bytes (BCH)
Active mode: 260 mA
Idle mode: 120 mA
Serial ATA 2.5
180D
Removable Storage Drives
DA - 13372 Worldwide QuickSpecs — Version 4 — 7.17.2009
Page 12
QuickSpecs
HP 4410t Mobile Thin Client
Technical Specifications
DVD-ROM Drive
Access Times
Random
< 110 ms CD (typical)
< 110 ms DVD (typical)
Up to 3,600 KB/s
Up to 10,800 KB/s
Max Data Transfer Rate24X CD-ROM
8X-DVD
Transfer Mode
UDMA Mode 5
Interface
Gen 1 SATA
Supported Media (read) CD-DA, CD+(E)G, CD-MIDI, CD-TEXT, CD-ROM, CD-ROM XA, MIXED
MODE CD, CD-I, CD-I Bridge (Photo-CD, Video CD), Multisession CD
(Photo-CD, CD-EXTRA, Portfolio, CD-R, CD-RW), CD-R, CD-RW,
DVD-ROM (DVD-5, DVD-9, DVD-10, DVD-18), DVD-R, DVD-RW,
DVD+R, DVD+RW, DVD-RAM
Supported Media (write)None
Max Media Capacity 8.5 GB
(read)
Transport
Tray Loading
Audio
Hardware
Implementation
Full Duplex
Microphone In
Headphone/Line Out
Integrated Microphone
ADI 1984AJCPZ High Definition CODEC
Yes
Stereo
Stereo
Yes
Audio Output Quality
Frequency Response
Signal to Noise Ratio
Total Harmonic
Distortion
Noise Floor
Play/Record Sampling
Rate(s)
DAC
ADC
20 Hz – 20 kHz
>85 dB
0.01%
Power Rating
Impedance
1.5 Watts
4 Ohms
Integrated Stereo
Speakers
-110 dB
8 kHz – 48kHz
16, 20 or 24-bit
16 or 20-bit
Communications
DA - 13372 Worldwide QuickSpecs — Version 4 — 7.17.2009
Page 13
QuickSpecs
HP 4410t Mobile Thin Client
Technical Specifications
Integrated Marvell
10/100/1000 NIC
Ethernet Features
10 Mbit/s operation (10BASE-T; IEEE 802.3i; IEEE 802.3 clauses 1314)
100 Mbit/s operation (100BASE-TX; IEEE 802.3u; IEEE 802.3 clauses
21-30)
1000 Mbit/s operation (1000BASE-T; IEEE 802.3z and 802.3ab; IEEE
802.3 clauses 34-42)
Auto-Negotiation (Automatic Speed Selection)
Full Duplex Operation at all Speeds, Half Duplex operation at 10 and
100 Mbit/s
IEEE 802.1p QoS (Quality of Service) Support
IEEE 802.3x Flow Control (IEEE 802.3 clauses 31-32; configurable)
Power Management
ACPI compliant – multiple power modes
Situation-sensitive features reduce power consumption
Performance Features TCP/IP/UDP Checksum Offload (configurable)
Manageability
Wake-on-LAN from standby (Magic Packet and Microsoft Wake-Up
Frame); Wake-on-LAN from off (Magic Packet only)
PXE 2.1 Remote Boot
Statistics Gathering (SNMP MIB II, Ethernet-like MIB, Ethernet MIB
(802.3x, clause 30))
Comprehensive diagnostic and configuration software suite
Interface
PCI Express x1
NIC Device Driver
Marvell Yukon 88E8072 PCI-E Gigabit Ethernet Controller
Name
V.92 56K Data/Fax
Modem
Form Factor
Power Management
Support
Approvals/
Certifications
MDC 1.5 Daughtercard
APM Revision 1.2, ACPI
UL, CSA, NEMKO, CCIB, Industry Canada, FCC Part 68, CTR21, FCC
Part 15 Class B, Canadian ICES-003 Class B, C.I.S.P.R.22, Australian
ACA, CE Mark, Other Countries
Data Mode Capabilities V.92 data
V.8bis
V.80
V44, V.42bis, MNP5 (Compression)
V.42 (LAPM, MNP2-4) (Error Correction)
Optional symbol rates:
2800, 3429
Asymmetric Symbol rates
Synchronous primary channel data signaling rates:
3600, 31200
Automatic rate re-negotiation
V.34
V.32bis
V.32
V.23
V.22bis
V.22
V.21
Bell 212A
Bell 103J
DA - 13372 Worldwide QuickSpecs — Version 4 — 7.17.2009
Page 14
QuickSpecs
HP 4410t Mobile Thin Client
Technical Specifications
Fax Mode Capabilities TIA/EIA-578-B (Class 1)
T.30, T.4 (Group 3)
V.17
V.29
V.27ter
V.21 Channel 2
Command Set
V.250 (Partial)
TIA-602
Identification: +GMI, +GMM, +GMR
Port control: +IPR, +ICF, +IFC, +ILRR
Modulation: +MS, +MR, +MA
Error control: +ES, +ER, +EB, +ESR, +ETBM
Data compression: +DS, +DR
V.251
Broadcom 4312G
Wireless LAN
802.11b/g WiFi Adapter Standards
Interoperability
Frequency Band
Data Rates
Modulation
Security1
IEEE 802.11b
IEEE 802.11g
Wi-Fi certified
Cisco Compatible Extensions Program compliant with Microsoft
Windows XP (details at: http://www.hp.com/go/notebooks/WLAN)
2.4 GHz
802.11b: 1, 2, 5.5, 11 Mbps
802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
Direct Sequence Spread Spectrum
DBPSK, DQPSK, CCK, OFDM
Supports 64- and 128-bit WEP, WPA, WPA2, hardware-accelerated
AES, 802.1x authentication types EAP-TLS, EAP-TTLS, PEAP-GTC,
PEAP-MSCHAPv2, LEAP, EAP-FAST.
Support for Cisco Security Features (proven compatibility with Cisco
Aironet infrastructure products through the Cisco Compatible
Extensions Program Version 4) with Microsoft Windows XP.
Sub-channels
Multinational support with frequency bands and channels compliant to
local regulations.
Media Access Protocol CSMA/CA (Collision Avoidance) with ACK
Network Architecture Ad-hoc (Peer to Peer)
Models
Infrastructure (Access Point Required)
Roaming
IEEE 802.11 compliant roaming between access points
Output Power (for
17 dBm , nominal
CCK)2
Output Power (for
15 dBm , nominal
OFDM; power varies by
data rate)2
Power Consumption
Idle associated: 250 mW
Idle unassociated: 150 mW
Transmit: 2.0 W (max)
Receive: 2.0 W (max)
Power Management
ACPI compliant power management
802.11 compliant power saving mode
3
Receiver Sensitivity
54 Mbps: -71 dBm, 11 Mbps: -85 dBm , 1 Mbps: -95 dBm
Antenna type
High efficiency dual band antenna with spatial diversity, mounted in the
display enclosure
Form Factor
PCI-Express Half-MiniCard
Weight
0.013 lb (6 g)
DA - 13372 Worldwide QuickSpecs — Version 4 — 7.17.2009
Page 15
QuickSpecs
HP 4410t Mobile Thin Client
Technical Specifications
Dimensions
Operating Voltage
Temperature
0.19 x 1.06 x 1.18 in (4.75 x 26.8 x 30 mm)
3.3v +/- 10%
Operating
14° to 149° F (–10° to 65° C)
Non-operating
–40° to 176° F (–40° to 80° C)
Humidity
Operating
10% to 90% (non-condensing)
Non-operating
5% to 95% (non-condensing)
Altitude
Operating
0 to 10,000 ft (3,048 m)
Non-operating
0 to 50,000 ft (15,240 m)
LED Activity
LED Off – Radio OFF; Solid LED On – Radio ON
1. Check latest software/driver release for updates on supported security features.
2. Maximum output power may vary by country according to local regulations.
3. Receiver sensitivity is measured at a packet error rate of 8% for 802.11b (CCK modulation)
and a packet error rate of 10% for 802.11a/g (OFDM modulation).
4. WLAN supplier's client utility is required for Cisco Compatible Extensions support with
Microsoft Windows XP. WLAN may also be compatible with certain third-party software
supplicants.
Broadcom 4322AGN
Wireless LAN
802.11a/b/g/draft-n WiFi Standards
Adapter
Interoperability
Frequency Band
Data Rates
Frequency Support
Modulation
Security1
IEEE 802.11a
IEEE 802.11b
IEEE 802.11g
IEEE 802.11n (draft 2.0)*
* The specifications for 802.11n draft 2.0 are draft specifications and
are not final. If the final specifications differ from the draft specifications,
it may affect the ability of the notebook to communicate with other
802.11n WLAN devices.
Wi-Fi certified (802.11abg only)
Cisco Compatible Extensions Program compliant (802.11abg only) with
Microsoft Windows XP (details at:
http://www.hp.com/go/notebooks/WLAN)
2.4 GHz and 5 GHz
802.11b: 1, 2, 5.5, 11 Mbps
802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n (draft): 6, 6.5, 9, 12, 13, 13.5, 18, 19.5, 24, 26, 27, 36, 39,
40.5, 48, 52, 54, 58.5, 65, 78, 81, 104, 108, 117, 121.5, 130, 135, 162,
216, 243, 270, 300 Mbps
20 MHz: 2.4 GHz and 5 GHz bands
40 MHz: 2.4 GHz and 5 GHz bands
Direct Sequence Spread Spectrum
DBPSK, DQPSK, CCK, OFDM, BPSK, QPSK, 16-QAM, 64-QAM
Supports 64- and 128-bit WEP, WPA, WPA2, hardware-accelerated
AES, 802.1x authentication types EAP-TLS, EAP-TTLS, PEAP-GTC,
PEAP-MSCHAPv2, LEAP, EAP-FAST.
Support for Cisco Security Features (proven compatibility with Cisco
Aironet infrastructure products through the Cisco Compatible
Extensions Program Version 4) with Microsoft Windows XP.
Sub-channels
Multinational support with frequency bands and channels compliant to
local regulations.
Media Access Protocol CSMA/CA (Collision Avoidance) with ACK
Network Architecture Ad-hoc (Peer to Peer)
Models
Infrastructure (Access Point Required)
Roaming
IEEE 802.11 compliant roaming between access points
Output Power (for
17 dBm
CCK)2
DA - 13372 Worldwide QuickSpecs — Version 4 — 7.17.2009
Page 16
QuickSpecs
HP 4410t Mobile Thin Client
Technical Specifications
Output Power (for
OFDM; power varies by
data rate)2
Power Consumption
15 dBm
Eco-Label
Certifications
This product has received or is in the process of being certified to the
following approvals and may be labeled with one or more of these
marks:
Idle associated: 250 mW
Idle unassociated: 150 mW
Transmit/Receive 20 MHz channel: 2.0 W (max)
Transmit/Receive 40 MHz channel: 2.0 W (max)
Power Management
ACPI compliant power management
802.11 compliant power saving mode
3
Receiver Sensitivity
270 Mbps: -61dBm, , 54 Mbps: -72 dBm, 11 Mbps: -85 dBm , 1 Mbps: 92 dBm
Antenna type
High efficiency dual band antenna with spatial diversity, mounted in the
display enclosure
Form Factor
PCI-Express Half-MiniCard
Weight
0.013 lb (6 g)
Dimensions
0.19 x 1.06 x 1.18 in (4.75 x 26.8 x 30 mm)
Operating Voltage
3.3v +/- 10%
Temperature
Operating
14° to 149° F (–10° to 65° C)
Non-operating
–40° to 176° F (–40° to 80° C)
Humidity
Operating
10% to 90% (non-condensing)
Non-operating
5% to 95% (non-condensing)
Altitude
Operating
0 to 10,000 ft (3,048 m)
Non-operating
0 to 50,000 ft (15,240 m)
LED Activity
LED Off – Radio OFF; Solid LED On – Radio ON
1. Check latest software/driver release for updates on supported security features.
2. Maximum output power may vary by country according to local regulations.
3. Receiver sensitivity is measured at a packet error rate of 8% for 802.11b (CCK modulation)
and a packet error rate of 10% for 802.11a/g (OFDM modulation).
4. WLAN supplier's client utility is required for Cisco Compatible Extensions support with
Microsoft Windows XP. WLAN may also be compatible with certain third-party software
supplicants.
Environmental Data
IT ECO declaration
System Configuration The configuration used for the Energy Consumption and Declared Noise
Emissions data for the Convertible Mini tower Desktop model is based
on a "Typically Configured Notebook"
Energy Consumption
115 VAC
230 VAC
100 VAC
Normal Operation
10.55 W
11.06 W
10.43 W
Sleep (Energy Star low
0.936 W
1.061 W
0.9 W
power mode)
Off
0.565 W
0.660 W
0.536 W
Heat Dissipation*
Normal Operation
Sleep
Off
115 VAC
230 VAC
100 VAC
36 BTU/hr
38 BTU/hr
36 BTU/hr
3 BTU/hr
4 BTU/hr
3 BTU/hr
2 BTU/hr
2 BTU/hr
2 BTU/hr
* Heat dissipation is calculated based on the measured watts, assuming
the service level is attained for one hour.
Declared Noise
DA - 13372 Worldwide QuickSpecs — Version 4 — 7.17.2009
Page 17
QuickSpecs
HP 4410t Mobile Thin Client
Technical Specifications
Emissions
(in accordance with
ISO 7779 and ISO 9296)
System Fan Off
Sound Power
(LWAd, bels)
2.5
NA
Sound Pressure
(LpAm, decibels)
16.2
NA
Idle
Fixed Disk
(random writes)
System fan is usually off except when charging the battery
Batteries
This battery(s) in this product comply with EU Directive 2006/66/EC
Batteries used in the product do not contain:
Mercury greater the 5ppm by weight
Cadmium greater than 10ppm by weight
The battery type and chemistry used in the product is:
CR2032 (coin cell), Li ion
This product is in compliance with the Restrictions of Hazardous
Substances (RoHS) directive - 2002/95/EC.
Additional
information
This HP product is designed to comply with the Waste Electrical and
Electronic Equipment (WEEE) Directive - 2002/96/EC.
This product is in compliance with California Proposition 65 (State of
California; Safe Drinking Water and Toxic Enforcement Act of 1986).
Plastics parts weighing over 25 grams used in the product are marked
per ISO 11469 and ISO1043.
This product contains 0% post consumer recycled plastic (by wt.)
This product is greater than 97.4% recycle-able when properly disposed
of at end of life.
Packaging Materials
External:
CANON bags - several layers 15g
Corrugated carton 485g
Cardboard & misc. 70g
Internal:
EPE-Expanded Polyethylene 70g
The EPE foam packaging material is made from 100% recycled
content.
The corrugated paper packaging materials contains at least 80%
recycled content.
HP follows these guidelines to decrease the environmental impact of
product packaging:
Eliminate the use of heavy metals such as lead, chromium,
mercury and cadmium in packaging materials.
Eliminate the use of ozone-depleting substances (ODS) in
packaging materials.
Design packaging materials for ease of disassembly.
Maximize the use of post-consumer recycled content materials in
packaging materials.
Use readily recyclable packaging materials such as paper and
DA - 13372 Worldwide QuickSpecs — Version 4 — 7.17.2009
Page 18
QuickSpecs
HP 4410t Mobile Thin Client
Technical Specifications
Material Usage
End-of-life
Management and
Recycling
Hewlett-Packard
Corporate
Environmental
Information
corrugated materials.
Reduce size and weight of packages to improve transportation
fuel efficiency.
Plastic packaging materials are marked according to ISO 11469
and DIN 6120 standards.
This product does not contain any of the following substances in excess
of regulatory limits (for reference of these limits please refer to the HP
General Specification of the Environment
(http://www.hp.com/hpinfo/globalcitizenship/environment/supplychain/
gen_specifications.html):
Asbestos
Certain Azo Colorants
Certain Brominated Flame Retardants - may not be used as flame
retardants in plastics
Cadmium
Chlorinated Hydrocarbons
Chlorinated Paraffins
Formaldehyde
Halogenated Diphenyl Methanes
Lead carbonates and sulfates
Lead and Lead compounds
Mercuric Oxide Batteries
Nickel - finishes must not be used on the external surface
designed to be frequently handled or carried by the user.
Ozone Depleting Substances
Polybrominated Biphenyls (PBBs)
Polybrominated Biphenyl Ethers (PBBEs)
Polybrominated Biphenyl Oxides (PBBOs)
Polychlorinated Biphenyl (PCB)
Polychlorinated Terphenyls (PCT)
Polyvinyl Chloride (PVC) - except for wires and cables, and certain
retail packaging has been voluntarily removed from most
applications.
Radioactive Substances
Tributyl Tin (TBT), Triphenyl Tin (TPT), Tributyl Tin Oxide (TBTO)
Hewlett-Packard offers end-of-life HP product return and recycling
programs in many geographic areas. To recycle your product, please go
to: http://www.hp.com/go/reuse-recycle or contact your nearest HP sales
office. Products returned to HP will be recycled, recovered or disposed
of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to
provide treatment information for each product type for use by treatment
facilities. This information (product disassembly instructions) is posted
on the Hewlett Packard web site at: http://www.hp.com/go/recyclers.
These instructions may be used by recyclers and other WEEE treatment
facilities as well as HP OEM customers who integrate and re-sell HP
equipment.
For more information about HP's commitment to the environment:
Global Citizenship Report
http://www.hp.com/hpinfo/globalcitizenship/gcreport/index.html
Environment website
http://www.hp.com/environment
Eco-label certifications
http://www.hp.com/hpinfo/globalcitizenship/environment/productdesign/
ecolabels.html
ISO 14001 certificates:
http://www.hp.com/hpinfo/globalcitizenship/environment/operations/
envmanagement.html
DA - 13372 Worldwide QuickSpecs — Version 4 — 7.17.2009
Page 19
QuickSpecs
HP 4410t Mobile Thin Client
Technical Specifications
Copyright © 2009 Hewlett-Packard Development Company, L.P.
All rights reserved. Microsoft, Windows, and Windows Vista are registered trademarks or trademarks of Microsoft
Corporation in the U.S. and/or other countries. Intel, Core 2 Duo, and Celeron are registered trademarks or trademarks of
Intel Corporation in the U.S. and/or other countries. Bluetooth is a registered trademark of Bluetooth SIG, Inc., in the U.S.
and other countries. All other product names mentioned herein may be trademarks of their respective companies.
The information contained herein is subject to change without notice and is provided "as is" without warranty of any kind. The
warranties for HP products are set forth in the express limited warranty statements accompanying such products. Nothing
herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or
omissions contained herein.
DA - 13372 Worldwide QuickSpecs — Version 4 — 7.17.2009
Page 20
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement