user`s manual
USER’S MANUAL
Xemio-657 / Xemio-667
MP3/MP4 Media Player
For information and support: www.lenco.com
1
Cautions

Do not place naked flames, such as lighted candles on or near the product.


Do not place objects filled with liquids, such as vases on or near the product.
Do not use or store this product in a place where it is subject to direct sunlight, heat, excessive dust or
vibration.

Do not use this product with wet hands.

Do not clean this product with water or other liquids.

Do not block or cover the slots and holes in the product.

Do not push foreign objects into the slots or holes in the product.

Do not attempt to open this product yourself. There are no user serviceable parts inside.

Do not allow children access to plastic bags.
Safety Warnings

Before using this product, read and follow all warnings and instructions.






This product is not intended for use by young children. Young children should be properly supervised.
This product is intended for household use only and not for commercial or industrial use.
Do not expose to dripping or splashing.
No naked flame sources, such as lighted candles, should be placed on the product.
Ventilation should not be impeded by covering ventilation openings with items such as newspapers, table
cloths, curtains and the like.
Make sure the unit is adjusted to a stable position. Damage caused by using this product in an unstable
position or by failure to follow any other warning or precaution contained within this user manual will not be
covered by warranty.
We, suggest retaining the packaging in case for future transport of the product.
If at any time in the future you should need to dispose of this product please note that: All batteries and
accumulators need to be removed from this product (Removal of Waste Batteries and Accumulators).
WARNING:
 When participating in the traffic listening to a personal music player can make the listener
less aware of potential dangers such as approaching cars.
WARNING:
 Prolonged exposure to loud sounds from personal music players may lead to temporary or
permanent hearing loss.
2
1.
Get to know the controls on Player
Item
Description
1
TFT LCD Display
2
Button (On / Off, Play / Pause)
3
Button (Previous / Fast-Rewind)
4
Button (Next / Fast-Forward)
5
6
M Button (Menu)
Button (Previous Menu / Exit)
7
Micro USB Port (PC Connection / Charge)
8
Microphone Position (mono, inside USB port)
9
Micro SD Memory Card Slot
10
Earphone Output Jack (3.5mm Stereo)
11
Button (Volume Down)
12
Button (Volume Up)
2.
About Player Battery
Player has an internal, non–user-replaceable battery. For best results, the first time you use player, let it
charge for about 2 ~ 3 hours or until the battery status icon in the “Connect” screen shows that the battery is in
full.
Battery is in full
Note: Player may continue use battery power after it’s been turned off. For maintain the battery life and
performance, if unit isn’t used for a while, the battery need to be recharged, recharging the battery at least once
per month.
a. Charging the Battery:
You can charge the player battery in two ways:
 Connect player to your computer. Or,
 Use the USB power charger. (not included)
3
b.

Connection and Charging:
Once you have connected player with computer / power charger, then you will see the “Connect” screen
appear on screen,

The level bars are running in battery status icon at the “Connect” screen. The battery is in charging.
“Connect” Screen
In Charging
Important: The battery does not charge when your computer is in sleep. The USB port on most keyboards does not
provide enough power to charge the player. Connect player to a USB 2.0 port on your computer only to prevent
charge problem.
3.
Connecting and Disconnecting Player
You can connect the player with your computer to transfer those media files and recorded voice memos when
necessary, and to charge the battery.
a.



To Connecting Player
To connect player to your computer, plug the connector of USB Cable into a USB port on your computer, and
connect the other end to player, then the “Connect” screen appear for view.
Now the player is ready for media files transfer with your computer and the battery is charging.
You can transfer the media files by using the computer mouse use drag and place, or copy and paste, in
between the player and your computer. Disconnect it when you’re done.
b.
To Disconnecting Player
It’s important not to disconnect player while it’s syncing or transferring files. Eject the player before
disconnect it.
 To eject player, press and hold M button for about 2 seconds, the “Connect” screen will switch to “Main
Menu” screen. And now is safe to disconnect the player with your computer. Unplug the USB cable from the
player. Or,
 If you’re using a Windows PC, you can also eject player in My Computer or by clicking the “Safely Remove
Hardware” icon in the Windows system tray, select the correspondence name of USB Device and choose
“Stop” > choose “Confirm” > choose “Confirm” follow by the pop up windows you’re your computer.
4



If you’re using a Mac, you can also eject player by dragging the player icon on the desktop to the Trash.
Disconnect the USB cable from the player and computer, simply remove it.
If you accidentally disconnect player without ejecting it, reconnect it to your computer and sync again.
However, some media file may loss.
4.


Getting Start the Player
Turn ON / OFF the player and use of Main Menu.
Press and hold the
button for 3 seconds to turn ON, then you will see any one of the following shown
Main Menu screen, Music / Movie / Record / Voice / Photo / eBook / Game / Setup, will appear on LCD after
the Loading and Opening screen have displayed.
To OFF the player, press and hold the
button for 3 seconds.
“Main Menu” screens
5.
Use Setup Menu
You might need to set date & time or change some default setting as you desired in setup sub menu before
you start to use the player.
 To go into setup menu, from main menu, choose “Setup” by use
/
button and then press
button, a “Setting” menu appears to use.
 You can go back to previous menu by press the
button during in setup menu. Or, press and hold the
button to return to main menu.
Setup Menu
a.

(Menu Page 1)
(Menu Page 2)
To Setup “System time” (Date & Time):
Choose “System time” by using
/
button and then press
button, a date & time setting screen
5

appears to use.
Press “ ” button, the year is highlighted then adjusting to current year by pressing the
/
button.
And repeating the adjusting methods by “ / ” and
/
button again for finished those items;
Month, Date, Hour, Minute and seconds setting adjustment.
 Finally, you need to press the
button to confirm the adjustment and back to Setup menu, if not the date
& time will not to memorize and you need to adjust them again.
Note: the set date & time will be losses if internal rechargeable battery is fully emptied in protection mode. Adjust
the clock again if you want it to use.
b. To change “LCD set”
You can set the backlight to illuminate the screen for a certain amount of time as you desired or make the
backlight to always ON when every time you turn ON the player.
 To change LCD backlight, choose “LCD set” > choose “Dark mode”, a level bar with number appear then chose
“0 (always On) / 5 / 10 / 15 / 20 / 25 / 30 / 35 / 40 / 45 / 50 seconds” as you desired by using
and
/
buttons. Choose “0” to prevent the LCD backlight from turning to off. (choosing this option decrease
battery performance)
c. To Change “Language”
This player can use difference OSD languages.
 To set the language, choose “Language”, and then choose which language as you desired by using
and
/
buttons.
d. To Set “Power Off”
The Power Off setting can extend the time between battery charges by turning OFF the player when you are
not using the controls or no operation. Also, Sleep function provided for more choice.
 To set power off time, choose “Power off”, then choose “Off time”, a levels bar with number menu appear,
then choose “0 - 200 seconds” as you want by using
and
/
buttons.

To set sleep time, choose “Power off”, then choose “Sleep time”, a levels bar with number menu appear,
choose “0 / 10 / 20 /30 / 40 / 50 / 60 / 70 / 80 / 90 / 100 / 110 / 120 minutes” as you want by using
and
/
buttons.
e. To View “Memory info”
You can view about the memory status of player, such as the numbers of remaining memory space available
and the percentage of memory have used.
 To view the status, choose “Memory info” by using
and
/
buttons. An information screen,
remaining memory space available and percentage of memory used, appear for view.
 To return to setup menu or main menu press
button or press and hold
button.
f. To View “Firmware Version”


g.

You might need to view the details about firmware information inside the Player.
Choose “Firmware version” by using
and
/
buttons, an information screen appear for view.
To return to setup menu or main menu, press
button or press and hold
button.
To “Exit”
Select Exit to back to main menu. Or, press and hold the
button to go back main menu.
6.
Use Music Menu
You can use music player to playback with supported music file format of audio coding; WMA and MP3 are
supported by the player. To open the music player in Main Menu:
6

From main menu, choose “Music” by using
/
and
button, a “Music Now Playing” screen
appears to use.
“Music Now Playing” Screen
a.



To Play / Pause Music
In Music Now Playing screen, press
button to start the play.
Press
button to pause the playing music.
Press it again to resume.
b.


c.


d.


For
Play Previous or Next Music
Press
button to play next music.
Press
button to play previous music.
Use Fast-Forward or Fast-Backward
Press and hold
button to use fast-forward
Press and hold
button to use fast-backward.
Adjust volume level
In music playing, press
/
buttons to adjust volume levels to Up / Down.
Wait for 6 – 8 seconds or press
button to return to music now playing screen.
hearing protection; A display warning pop-up on TFT screen, when every time you increase the volume level
and reach to the default setting level which may exceed 85db. Press M button to accept the warning and press
Button to increase the volume level.
e. Use Lyric Display
This player supports “*.LRC” lyric files and lyrics can synchronous displayed while playing music if you music
has lyric included. How to know whether the lyrics exist? If the current song has matching lyric files, the color dot
beside the Lyric Message icon will be turned to green color
from red
in Music Now Playing screen.
 Make sure the music file name and “*.LRC” file name must be same and upload into player together.
 Playing the music with lyrics, and then press and hold M button to enter the lyric display mode and the lyrics is
displaying and moving up accordingly with the playing music.
 Press M button to cancel the lyrics display and go back to Music Now Play screen if you want.
7.


a.


Use Music Submenu in Music Stop Mode
You might need to selecting folders for music play and delete music files. To do this:
In Music Now Playing screen, press the
button to stop the playing music if player is in playing. Then,
Press the M button to pop-up the Music Submenu;
Local Folder
In Music Submenu screen, choose “Local folder” a list menu appear, and then select folder and / or choose a
music file by using
/
and
button.
It will go back to music now playing screen once a music file is selected. Then press
button to play.
7
b.

Artists
Choose “Artists” to enter folder(s) list menu grouping by Artist name, then choose who name of Artist folder >
choose a song file in list where start the play.
c.

Album
Choose “Album” to enter folder(s) list menu grouping by Album name, then choose who name of Album
folder > choose a song file in list where start the play.
d.

Genre
Choose “Genre” to enter folder(s) list menu grouping by Genres name, then choose who name of Genres
folder > choose a song file in list where start the play.
e.

Update playlist
Choose “Update playlist” to update the playlist when you found it show incorrect; actually, it is normal due to
some media files could be manual deleted in player’s memory by user in some case. However, update the
playlist when necessary.
f.
Delete file

Choose “Delete file” a list menu appear, and then choose which music file that you want to delete by using
/
and
buttons.
Once file is selected, press
button and choose Yes to confirm or No to cancel.
Delete All
Choose “Delete all”, a dialog appear to choose, then selects “Yes / No” by using the
/
and
buttons.
Choose Yes to confirm or No to cancel and press the
button to confirm.

g.



h.
All music files will be deleted once YES is selected and confirmed, a “Deleting” screen appear for a while and
deleting process is in progress, then “Empty disk!” message will shown on screen for few seconds.
Exit

Select Exit to back to music now playing screen.
8.
Use Music Submenu in Music Playing Mode
You might need to do some changes for music playing, such as repeat, EQ settings for music files… etc. To
change setting:
a. To Set Repeat
 In music playing mode, press M button, a Music Submenu appear;
 Choose “Repeat”, then choose “Normal / Repeat one / Repeat All / Repeat folder / Random All / Random
Folder” as you desired by using
/
and
buttons.
b. To Change Equalizer

c.

Choose “Equalizer”, then choose “Natural / Rock / Pop / Classic / Soft / Jazz / DBB” as you desired.
Exit
Select Exit to back to music now playing screen.
9.
a.

Use Movie Menu
To Play Movie
From Main Menu, choose “Movie” by using
/
and
appears to use.
In Movie Now Playing” screen, press
key to start the play.

8
button, a “Movie Now Playing” screen

b.
Press
button to pause and to back to Movie Now Playing screen. Press it again, the video will play
continue.
To Play Previous or Next Video
 Press
button to play next movie file.
 Press
button to play previous movie file.
c. Use Fast-Forward or Fast-Backward
 Press and hold
button to play fast-forward.
 Press and hold
button to play fast-backward.
d. Adjust Volume Level
 In movie playing, press
/
buttons to adjust volume levels to Up / Down.
For hearing protection; warning will pop up at the display, when every time you increase the volume level and
reach to the default setting level which may exceed 85dB. Press M button to accept the warning and press
button to increase the volume level.
10. Use Movie Submenu
You might need to selecting folders, delete movie files and set repeat for movie play. You can make change
during in the playing mode at Movie Now playing screen To do this:
 In “Movie Now Playing” screen, press M button to enter to movie submenu.
a. Local Folder
 In movie submenu screen, choose “Local Folder”, a file list menu appear, and then select folder and / or
choose a desired movie file to play by using
/
and
button.
 It will go back to music now playing screen once a music file is selected. Then press
button to play.
b. Delete File
 In movie submenu screen, choose “Delete file” a file list menu appear, and then choose which movie file that

c.



d.

e.

you want to delete by using
/
buttons.
Once file is selected, press
button and choose “Yes” to confirm or “No” to cancel.
Delete All
In movie submenu screen, choose “Delete all” then selects “Yes / No” by using
/
button.
One “YES” or “NO” appear then press
button to confirm.
All movie files will be deleted once YES is selected and confirmed, a “Deleting” screen appear for a while and
deleting process is in progress, then “Empty disk!” message will shown on screen for few seconds.
Repeat
In movie submenu, choose “Repeat”, then choose “Normal / Repeat one / Repeat all / Repeat folder /
Random all / Random folder” as you desired by using
/
and
buttons.
Exit
Select Exit to back to music now playing screen.
11. Convert Video files into AMV
This tool can be used to transform those video files into AMV files on the computer before upload them to
your player.
 To install this video convert tool to your computer, open a folder named “UTILITIES > Video Conversion
Software” which stored in your player’s internal memory or stored in a provided CD. (Download it onto your
computer for copy and installation)
9


Select “Setup” to start the install program, the software will automatically install to your computer.
After installation is done, open folder “Media Player Utilities 4.28” > click program “AMV&AVI Video
converter” in All Program bar on your window PC. The program interface as shown below:
Noted: This program is used to convert video files into AMV format, currently only AMV format is supported by this
player.

Then click
to choose the folder where to save the AMV files, and then click
where the original files are. The original file will show in the file window once selected.

Move the mouse arrow and left click mouse on the unconverted source files to select with highlight in the file
window, then the
icon will be highlighted into
icon. Now click this
icon and a dialog box will be
shown.

Now click this
icon and a dialog box will be shown.
10
to select the folder


Make sure Video type is “AMV”, Screen width and height is “160x120” selected. Video convert and Image
quality should be “Normal” and “High” as defaulted. Click “OK” to confirm the setting.
Now click
to start converting.

After conversion, the AMV files will play automatically for preview.

And now, the converted AMV file is ready to transfer, you can simply copy and place those converted AMV files
to the media player.
Note: Only pixels in 160x120 or 320x240 can be supported by this player.
12. Use Record Menu
You can use the player as a Voice Recorder and recording voice memos using the built-in microphone.
a. To Start Recording Voice Memo
 From main menu, choose “Record” by using
/
and
buttons, a “Now Recording” screen
appear to use.
“Now Recording” Screen
b.

To Start / Pause Recording
Press
button to start the recording and the recording time is running.
11

c.


Press
button to pause the recording and recording time will stop and flashing. Press it again the recording
and time will run continue.
To Save and Stop Recording File
Press
or press and hold
button, the recorded file will save into memory and ready for next
recording.
Press and hold
button, the recorded file will save into memory and to exit.
13. Use Record Submenu (in Stop Mode)
You might need to change the folder locations which want to store the record file and / or change record
quality to better compression values.
 In Now Recording screen at stop mode, press M button, a “Record Sub-menu appear to use.
a. Local folder
 In record submenu, choose “Local folder” and then choose the folder name which you want to save the record
file by using
/
and
buttons.


b.

Once folder name selected, press and hold the M button, then the folder location is changed and go back to
Now Recording screen.
And now you can see the folder name is changed at the Record Folder icon in “Now Recording” screen.
Record Type
In record submenu, choose “Record type”, then choose “32K BPS / 64K BPS / 128K BPS / 256K BPS” values as
you desired by using
/
and
buttons.
14. Use Voice Menu
For playback and manage the recorded voice memos file.
 From main menu, choose “Voice” menu by using
/
and
buttons, a “Voice Now Playing”
screen appear to use.
“Voice Now Playing” Screen
a.
To Play and Pause Recorded Voice Memos
 In Voice Now Playing screen, press
button to start to play the recorded file.
 Press
button to pause the playing file.
b. To Play Previous or Next File
 Press
button to play next file.
 Press
button to play previous file.
c. To Fast-Forward or Fast-Backward
Press and hold
buttons to use fast-forward
Press and hold
button to use fast-backward.
d. Adjust volume level
12


In music playing , press
/
button, a change volume control screen appears, then press
buttons to adjust volume levels to up / down.
Wait for 6 – 8 seconds or press
button to return to music now playing screen.
/
15. Use Voice Submenu in Stop Mode
You might need to change some setting as you desired for playing Voice file, you can make change during in
the playing mode at Voice Now Playing screen
a. Local Folder
 In Voice Now Playing screen, press
button to pause / stop the playing file, if in playing mode, then press
M button to call up the voice submenu.
 In Voice submenu screen, choose “Local folder” a list menu appear, and then select folder and / or choose a
voice file by using
/
and
button.
 It will go back to music now playing screen once a music file is selected. Then press
button to play.
b. Delete File


c.



d.

In voice submenu screen, choose “Delete file” a list menu appear, and then choose which voice file that you
want to delete by using
/
and
buttons.
Once file is selected, press
button and choose Yes to confirm or No to cancel.
Delete All
In voice sub-menu screen, choose “Delete all” then selects “Yes / No” by using
/
button.
One “YES” or “NO” appear then press
button to confirm.
All Recorded files will be deleted once YES is selected and confirmed, a “Deleting” screen appear for a while
and deleting process is in progress, then “Empty disk!” message will shown on screen for few seconds.
Exit
Select Exit to back to music now playing screen.
16. Use Voice Submenu in Playing Mode
You might need to do some changes for music playing, such as repeat, EQ settings for music files… etc. To
change setting:
a. Repeat
 In voice playing mode, press M button, a Music Sub-menu appear, then choose “Repeat”, then choose
“Normal / Repeat one / Repeat all / Repeat folder / Random all / Random folder” as you desired by using
/
and
buttons.
b. Exit
 Select Exit to back to music now playing screen.
Note: Press and hold the
button will go back to Main Menu directly.
17. Use Photo Browse
You can use the player as picture / photo viewer:
 To browse picture / photo file, from main menu choose “Photo” by using
/
menu appear to use.
 Choose a file by using
/
button, and then press
button to play.
 Press
button to stop and to go back to list menu for other files selection.
13
and
button, a list


To change previous / next photo, press
/
button.
Press and hold
button to back to main menu.
18. Use Photo Submenu in List Screen
You might need to change some setting for photo browse. To change setting:
a. Local Folder
 In list menu, press M button to call up the photo submenu.
 In photo submenu, choose “Local folder” a list menu appear, and then choose folder and file to browse by
using
/
and M button.
 Once photo file is selected, press
button to play.
b. Playback Set
 In photo submenu, choose “Playback set” and then choose “Manual play”. However, you need to use
/
button to browse next / previous photo in photo playing mode when Manual Play is selected.
 Choose “Auto play”, a setting menu appear, then choose “2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 second(s)” as you

d.



desired by using
/
and
buttons. The slide show function is activated as your selected time gap
to playing the photo files one by one automatically.
Delete file
In photo submenu, choose “Delete file” a list menu appear, and then choose which photo file that you want to
delete by using
/
button.
Once file is selected, press
button and choose Yes to confirm or No to cancel.
Delete All
In photo submenu, choose “Delete all” then selects “Yes / No” by using
/
button.
One “YES” or “NO” appear then press
button to confirm.
All photo files will be deleted once YES is selected and confirmed, a “Deleting” screen appear for a while and
e.

deleting process is in progress, then “Empty disk!” message will shown on screen for few seconds.
Exit
Select Exit for back to photo browse list menu screen.
c.

19. Use eBook Menu
You can use the player as a text reader with supported file format (.TXT).
a. To open eBook
 From main menu, choose “eBook” by using
/
and
buttons. A list menu appears to use.
 Choose a file which you want to read by using
/
button, and then press
button to play.
 Press
button to change next page,



Press
button to go back to previous page,
Back to list menu screen, press
button.
Go back to main menu, press and hold
button.
20. Us eBook Submenu in list menu screen
You might need to change some setting for eBook reading. To change setting:
a. Local Folder
 In eBook list menu screen, press M button to call up the eBook Submenu.
14


b.


c.


d.



e.

In eBook Submenu, choose “Local folder” a list menu appear, and then choose folder and file by using
and
button.
Once file is selected, press
button again to read.
/
Playback Set
In eBook Submenu, choose “Playback set” and then choose “Manual play”. You need to use
/
button to change next / previous page for reading when Manual Play is selected. Or,
Choose “Auto play”, a setting menu appears, then choose “1 / 2 / 3 / 4 / 5 / 5 / 6 / 7 / 8 / 9 / 10 second(s)” as
you desired by using
/
and
buttons. The Page Flip function is activated as your selected time
gap to playing.
Delete file
In eBook Submenu, choose “Delete file” a list menu appear, and then choose which eBook file that you want
to delete by using
/
button.
Once file is selected, press
button and choose Yes to confirm or No to cancel.
Delete All
In eBook Submenu, choose “Delete all” then selects “Yes / No” by using
/
button.
One “YES” or “NO” appear then press
button to confirm.
All eBook files will be deleted once YES is selected and confirmed, a “Deleing” screen appear for a while and
deleting process is in progress, then “Empty disk!” message will shown on screen for few seconds.
Exit
Select Exit for back to eBook list menu screen.
21. Us eBook Submenu in Playing Mode
You might need to add, select and delete some bookmark when you reading, to do this:
a. Bookmark Select


b.


c.


d.

In eBook playing mode, choose “Bookmark select” by using
/
and
button.
Choose a stored bookmark which you want to call and then press M button to play.
Bookmark Delete
In eBook playing mode, choose “Bookmark delete” a list menu appears, and then choose which saved
bookmark you want to delete by using
/
button.
Once bookmark is selected, press
button to confirm. The bookmark is deleted and goes back to current
reading play.
Bookmark Add
In eBook playing mode, select the reading page you want to bookmark, press M button to call up eBook
submenu.
Choose “Bookmark Add” by using
/
button and then press
bookmark and go back to current reading page automatically.
Exit
Select Exit for back to eBook list menu screen.
button, the pages is saved into
22. Use Memory Card Slot
This player allows you to play those support media files from your memory card (T-Flash). Also it will increase
15
the mobile hard disk memory capacity of the player if you use this option.
a. To Play From Memory Card:
 Turn Off the player. Now insert your Micro SD memory card into the memory card slot on side of player.




Turn On the player and now the Micro SD memory card, T-Flash, is ready to use.
The “Card folder” item will be existed to use when you enter into those music, movie, photo, , Record, Voice
and eBook submenu.
Go into the card folder and choose you desired folder(s) and file(s) to play.
To take out the Micro SD memory card, turn Off the player.
23. Use Game Menu
There have a game name “Snake”. Control the snake move up, down, left and right to eat the food (dot) which will
exist somewhere on TFT screen. The snake’s body will get longer at every eats for food, but don’t let the snake hit
the walls and hit the snake body.
 To play game, from Main menu, choose “Game” menu, then choose a game to play.



Control KEY instruction;
Press:
= left,
= right, M = Up,
Press and hold M button to exit the game.
= Down,
= Pause.
24. Reset Device
In some circumstances, the device may encounter dead halt during use. This device has design with built-in a
mini tact switch which located at the behind of the earphone jack, so it can provide reset function to restart the
device by pass through the earphone jack hole.
To Reset:
 Use a 1mm stick or similar object (like tooth stick), and carefully insert the stick, use dull side, into the

earphone jack hole until you feel to hit the end. Actually that is the tact switch button surface.
Then add a bit of force and you will get a click sound and feeling return from switch. The device is reset and
restart in seconds.
Important: Do not reset the device if it is proper working.
25. Trouble Shooting
Unit cannot turn ON
No
sound
is
* Check whether Power is slide to ON.
* Check battery is it charged with enough energy.
heard
from * Check whether Volume is set “0” and connect the headphone plugs firmly.
headphone.
* Check whether the headphone plug is dirty.
* Corrupted MP3 may make a static noise and the sound may cut off. Make
sure that the music files are not corrupted.
Characters in LCD are corrupted
* Check whether the right language has been selected.
Download of music files fails.
* Check whether USB cable is damaged and is connected properly.
* Check whether driver is installed correctly.
* Check whether the player’s memory is in full.
26. Specification
16
Dimension
85mm (H) x 41.5 mm (W) x 9.0mm (D)
Weight
25.5g
LCD
1.8 inches, Resolution (RGB) 128 x 160
PC connection
USB 2.0 (High Speed)
Earphone Impedance
32 Ohm
Internal Memory
See carton or giftbox
Memory Card Slot
Micro SD Card (support up to 16GB and possible for 32GB)
Battery
Power Source
Lithium 3.7V, 170mAh
Max. Play Time: 8 - 10 Hours (MP3 music with power saving mode)
DC Input: DC 5V 500mA
Earphone Output
2mW x 2 at 32 Ohm
Frequency Responses
20Hz to 20000Hz
SNR
> 70dB
Music Format
MP3 / WMA
32Kbps – 320kbps
Movie Format
AMV
160x120 / 320x240 (max.)
Recorder Coding
WAV
32 / 64 / 128 / 256kbps
Picture Format
JPEG / BMP
eBook Format
TXT
Operating Temperature
0 to 40℃
Operating System
Window 2000/XP/Vista/Win7/8/10, Mac 9.2 or Higher
Audio
27. Guarantee
Lenco offers service and warranty in accordance with the European law, which means that in case of repairs (both
during and after the warranty period) you should contact your local dealer.
Important note: It is not possible to send products that need repairs to Lenco directly.
Important note: If this unit is opened or accessed by a non-official service center in any way, the warranty expires.
This device is not suitable for professional use. In case of professional use, all warranty obligations of the
manufacturer will be voided.
28. Disclaimer
Updates to Firmware and/or hardware components are made regularly. Therefore some of the instruction,
specifications and pictures in this documentation may differ slightly from your particular situation. All items
described in this guide for illustration purposes only and may not apply to particular situation. No legal right or
entitlements may be obtained from the description made in this manual.
29. Disposal of the Old Device
17
This symbol indicates that the relevant electrical product or battery should not be disposed of as
general household waste in Europe. To ensure the correct waste treatment of the product and
battery, please dispose them in accordance to any applicable local laws of requirement for disposal
of electrical equipment or batteries. In so doing, you will help to conserve natural resources and
improve standards of environmental protection in treatment and disposal of electrical waste
(Waste Electrical and Electronic Equipment Directive).
30. CE Marking
Products with the CE marking comply with the EMC Directive (2014/30/EU) and the Low Voltage
Directive (2014/35/EU) issued by the Commission of the European Community.
Hereby, Lenco Benelux BV, Thermiekstraat 1a, 6361 HB Nuth, The Netherlands, declares that this
product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
The declaration of conformity may be consulted via [email protected]
31. Service
For more information and helpdesk support, please visit www.lenco.com
Lenco Benelux BV, Thermiekstraat 1a, 6361 HB, The Netherlands.
18
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement