simply better.
simply better.
Tripods and Accessories
SIRUI Product Catalogue 2016
SIRUI Story – Development and Philosophy
Development and philosophy of the SIRUI brand
Every day, SIRUI strives for the highest quality – from development to finished product. SIRUI‘s philosophy is to meet the
needs of amateur and professional photographers alike. The SIRUI photographic equipment company was founded in
2001. With continuous development of tool and precision machining paired with high levels of motivation and a design
and engineering team that has been carefully put together, SIRUI is finally in a position to take its own brand to
market.
Craftsmanship · Technology · Reliability
SIRUI products are produced with great care and precision using the finest materials in our modern factory. Before
and during assembly, every individual part is carefully checked by our experienced workers and fitted by hand to
create a perfect product., ensuring that our customers‘ highest expectations of precision and reliability are met.
Warranty
SIRUI is so confident in its products that each one carries a warranty of 6 years (2 years for bags and backpacks)
from the date of purchase, covering manufacturing and material defects. Special conditions apply. You will find
further details on page 47 of this catalogue.
Innovation
In late 2015, SIRUI entered the video/film market with six broadcast tripods and three broadcast heads. The
BCT tripods are available in aluminium or carbon. The BCH heads are available with either 75mm or 100mm
diameter half-ball levelling. Two additional products for film-makers are the VSK-5, a 5 in 1 Video Survival
Kit, and the VTJ-1.8 mobile camera crane with telescopic extension.
The C-10X ball head has been refined and has had the proven Safety Lock System added, which is also
available on other SIRUI heads. The new C-10S head is only available in tripod sets with the T04X and
T05X series.
The 75mm RX-75B levelling half-ball is an optional accessory for tripods in the RX series.
The TYL L-bracket series has been expanded to include three new models for Sony A7II, Nikon D750
and Fujifilm X-T1 cameras.
02
About SIRUI.
Contents
Tripods
Monopods
Tripod heads
Base units
Quick release plates /
Lens rails
Video equipment
Other accessories
Table Top Tripod
Traveler Ultralight
Traveler Light
Traveler
Easy Traveler
Universal
3T
T05X
T04X
TX, TXL
ET
NX
P. 06
P. 07
P. 08
P. 12
P. 13
P. 16
Professional
Compact
Multi-function
P
PC
PS
P. 26
P. 26
P. 28
Entry level ball heads
Mid-range ball heads
Up-range ball heads
Top-of-the-range ball heads
Tilt
CS
E
GX
KX
L
P. 32
P. 32
P. 33
P. 33
P. 34
Panorama
Multibase
Video platform
PA-20
MP-20
VH-90
P. 35
P. 46
P. 46
Universal
Universal wrist strap
Camera specific
Universal straps
L bracket
TYuni
TYX
TY
TYLP
TYL
P. 40
P. 40
P. 40
P. 40
P. 41
Broadcast tripods
Broadcast heads
Broadcast plates
5-in-1 Multitool
Camera crane
BCT
BCH
BP
VSK-5
VTJ-1.8
P. 25
P. 37
P. 41
P. 42
P. 44
Centre column RX series
Levelling half ball
Multibase
Video platform
Head support plate
RX-66C
RX-75B
MP-20
VH-90
KP-59
P. 46
P. 46
P. 46
P. 46
P. 46
Contents.
Easy Universal
Waterproof
Reporter
Reporter X
Snap Universal
Broadcast
EN
W
R
RX
SN
BCT
P. 17
P. 18
P. 22
P. 23
P. 24
P. 25
Levelling
Gimbal
Video
Video
Broadcast
LE-60
PH-20
VA-5
VH
BCH
P. 35
P. 36
P. 36
P. 37
P. 37
Broadcast
BP
P. 41
Lens rail
Lens rail
TY-350 P. 41
BP-350 P. 41
1/4“-3/8“ adapter
1/4“ U-bolt
TA-14
BS-14
P. 46
P. 46
03
SIRUI Tripods – precision in the detail
Whichever SIRUI tripod you choose, aluminium or carbon,
twist-lock or clips, a SIRUI tripod is an investment for life. A true
companion on your travels to foreign countries, bustling cities
and stunning landscapes or as a third hand in the studio.
With the waterproof W series, SIRUI has elevated outdoor
photography to a new level. The giants of the RX series set new
standards in stability and size. And the compact Traveler tripods
of the T04X series are hardly noticeable in your travel luggage.
Each series is specifically tailored to meet the needs of a photographer. High quality materials and modern manufacturing processes ensure consistent quality and functionality. With SIRUI,
you can concentrate on what matters most to you, the
photograph, without compromise.
04
Tripods.
Tripod Features
Head support plate
The aluminium head support plate (plastic on the T05X) features a plastic surface in
order to increase the adhesion between the head and the plate.
Integrated monopod
A fully-functional monopod is integrated into the tripod. Simply remove the leg from
the tripod and fit the second head support plate and wrist strap. The other support
plate can stay on the tripod.
Head mounting screw
The head mounting screw is simple and quickly switches from 1/4“ to 3/8“.
Sectioned centre column
The centre column can be split into sections, its height is adjustable and reversible. This
means that shooting is possible from any position. The flexibility of the sectioned centre
column allows, for example, ground-level shots and an increase in the overall height.
Centre column and short centre column
The height of the centre column is adjustable and reversible. An additional short
centre column is included. This means that shooting is possible from any position.
Both centre columns allow, for example, ground-level shots and for the overall height
to be increased.
Twist locks
Sealed twist locks with rubber for grip.
Just half a turn and the legs will start to descend. The locks can be disassembled for
maintenance.
Clip locks
Sealed clip locks for quick and easy use.
The practical clip locks open quickly and the leg section extends quickly. The locks can
be adjusted.
Rubber feet
The special (pointed) shape of the fixed rubber feet ensures that each leg has good grip
and will not slip at any angle.
Rubber feet and stainless steel spikes
The smaller size tripods are stable and will not slip on rubber feet. Larger tripods also
have twist-out metal spikes, intended for use on soft and uneven surfaces.
W and RX series have rubber feet and separate metal spikes.
Leg angle lock mechanism
When folding down the legs, this
is automatically engaged.
Two or three fixed positions are
employed.
Foam leg wraps
SIRUI tripods are fitted with
foam rubber wraps for protection
against heat, cold and for better
handling.
Legs can be folded by 180°
The legs can be folded up by 180°.
This reduces the packing size and
allows a head to be included.
Stabilising hook
SIRUI tripods feature a hook or
carabiner that can be loaded
with weight for added stability.
Head support plate
Additional Features
Series 3T, SN and RX tripods are special tripods, which is why they do not have directly comparable features
to other SIRUI tripods. Details of the special functions/features can be found on the page for each series.
Integrated monopod
The following series are tripod sets with heads or are also available as a set: 3T, T04X, T05X, TXL, ET
Sectioned centre column
Material
The leg joints on SIRUI tripods are made of machined aircraft-grade aluminium. The tripod legs on each
model are made of one of the following materials:
Aluminium: Aircraft-grade aluminium – lightweight, stable, hard-wearing
8x Carbon: 8 layer carbon fibre – super-lightweight, stable, inert
10x Carbon: 10 layer carbon fibre – super-lightweight, highly stable, inert
3T
T04X
T05X TX/TXL
ET
NX
EN
SN
W
R
RX
Centre column + short column
Twist locks
Clip locks
Rubber feet
Rubber feet + stainless steel spikes*
N-2204X
Version
Sections
Material
Size
*Stainless steel spikes not on sizes 1
n
Stabilising hook
SIRUI tripod code
Series
Foam leg wraps
on
10x Carb
Legs 180° foldable
8x Carbo
m
Aluminiu
Leg angle locking mechanism
Material: 0 Alu, 2 Carbon
Tripod Features and Material.
05
3T Series
Table Top Tripods – Video hand-held tripods with head
Head support plate
The aluminium head support plate is fitted with a set screw to secure
the head.
Head mounting screw
The head mounting screw quickly switches from 1/4“ to 3/8“.
Centre column and short centre column
The telescoping centre column can be extended to 8.5cm. A second
centre column that does not extend is included and can be swapped
with the telescoping column as required.
No centre column
Even without a centre column, the head can be mounted directly
onto the tripod legs. This allows the weight and working height to be
reduced for, e.g. ground-level shots.
Clip-on feet
Three 10cm long clip-on feet with rubber ends ensure high stability
when used as a table-top tripod. When folded up or down, the feet
serve as an ideal handle for video or taking selfies. Folds down to just
24cm including head.
Ball head 3T-35
A colour-matched ball head with quick release plate is included. There
is just one control for both panoramic rotation and tilt lock. Other features are: Arca Swiss compatible, vertical notch, 360° panorama, rubber
covered quick release plate.
Tripod
Material
Colour
Sections
ø Tube
min. height
Height
max. height
Pack size
Weight
3T-35
Alu
black
2
13-16
51
188
272
173
0.25
Load
4
3T-35
Alu
red
2
13-16
51
188
272
173
0.25
4
Load
Size in millimetres, weight in kilograms. All sizes without head.
0
Head
Material
Colour
Rotation
Scale
ø Base
ø Ball
Height
Weight
3T-35
Alu
black
360°
Yes
37
25
69
0.18
4
3T-35
Alu
red
360°
Yes
37
25
69
0.18
4
Size in millimetres, weight in kilograms.
06
Included:
3T-35 tripod with head and quick release plate, second non-extending centre column,
tripod bag, tool, warranty card, instructions
3T Series Mini Universal tripods.
T05X Series
Travel tripods with head – colourful, ultra lightweight, extremely compact
Head support plate
The head support plate is knurled to allow the screw to be comfortably
loosened and for the head to be attached.
Head mounting screw
The head mounting screw quickly switches from 1/4“ to 3/8“.
Extending centre column
The telescoping centre column can be extended to 15cm. The centre
column can be removed and the head mounted directly onto the tripod
legs as necessary. This reduces the working height, the size and the
weight.
Twist locks
Sealed twist locks with rubber for grip. Just half a turn and the legs will
start to descend. The locks can be disassembled for maintenance.
Rubber feet
The T05X Series tripods are stable and will not slip on rubber feet.
C-10S ball head (page 32)
A colour-matched ball head with quick release plate is included in the
set. With Safety Lock System – safety for your camera.
Features: Arca Swiss compatible, vertical notch, 360° panorama, rubber
covered quick release plate, metal controls.
Tripod
Material
Colour
Sections
ø Tube
min. height
Height
max. height
Pack Size
Weight
Load
Leg angles
T-005X
Alu
black
5
10-22
105
950
1300
300*
0.83
4
20-60-78
T-005X
Alu
blue
5
10-22
105
950
1300
300*
0.83
4
20-60-78
Alu
red
5
10-22
105
950
1300
300*
0.83
4
20-60-78
5
10-22
105
950
1300
300*
0.66
6
20-60-78
T-005X
T-025X
Carbon Carbon
Size in millimetres, weight in kilograms, leg angles in degrees, *Closed size including head 340mm.
0
Head
Material
Colour
Safety Lock
Rotation
Scale
ø Base
ø Ball
Height
Weight
C-10S
Alu
black
Yes
360°
Ja
39
29
88
0.22
4
C-10S
Alu
blue
Yes
360°
Ja
39
29
88
0.22
4
C-10S
Alu
red
Yes
360°
Ja
39
29
88
0.22
4
Size in millimetres, weight in kilograms.
Load
Additional Features:
•
folds up by 180° - the legs can be fully folded up from 0-180°, reducing the size
to just 34cm with the head. Three solid ratchet steps allow flexible use.
•
Leg angle locking mechanism – the legs lock automatically when folding down.
•
Stabilising carabiner – loading weight onto the carabiner ensures the tripod is
stable and steady.
•
Foam rubber leg wraps protect against high and low temperatures and ensure a
secure grip during transport and in use.
Included:
T05X tripod with C-10S head and TY-C10 quick release plate, tripod bag, tool, warranty
card, instructions
T05X Series Traveler Ultralight.
07
T04X Series
Travel tripods with head – colourful, compact, multi-function
Head support plate
The aluminium head support plate is fitted with a set screw to secure
the head.
Head mounting screw
The head mounting screw quickly switches from 1/4“ to 3/8“.
Centre column and short centre column
The height of the centre column is adjustable and it is reversible. Switching to the short centre column makes all shooting positions possible.
Both centre columns allow ground-level shots and for the overall
height to be increased.
Twist locks
Sealed twist locks with rubber for grip. Just half a turn and the legs will
start to descend. The locks can be disassembled for maintenance.
Rubber feet
The T04X Series tripods are stable and will not slip on rubber feet.
C-10S ball head (page 32)
A colour-matched ball head with quick release plate is included in the
set. With Safety Lock System – safety for your camera.
Features: Arca Swiss compatible, vertical notch, 360° panorama, rubber
covered quick release plate, metal controls.
Tripod
Material
Colour
Sections
ø Tube
min. height
Height
max. height
Pack Size
Weight
Load
Leg angles
T-004X
Alu
black
4
13-22
125
1150
1390
410
0.95
6
22-51-82
T-004X
Alu
blue
4
13-22
125
1150
1390
410
0.95
6
22-51-82
Alu
red
4
13-22
125
1150
1390
410
0.95
6
22-51-82
4
13-22
125
1150
1390
410
0.73
6
22-51-82
T-004X
T-024X
Carbon Carbon
Size in millimetres, weight in kilograms, leg angles in degrees.
0
Head
Material
Colour
Safety Lock
Rotation
Scale
ø Base
ø Ball
Height
Weight
C-10S
Alu
black
Yes
360°
Ja
39
29
88
0.22
4
C-10S
Alu
blue
Yes
360°
Ja
39
29
88
0.22
4
C-10S
Alu
red
Yes
360°
Ja
39
29
88
0.22
4
Size in millimetres, weight in kilograms.
08
Load
Additional Features:
•
Folds up by 180° - the legs can be fully folded up from 0-180°, reducing the size
and completely enclosing the head. Three solid ratchet steps allow flexible use.
•
Leg angle locking mechanism – the legs lock automatically when folding down.
•
Stabilising carabiner – loading weight onto the hook ensures the tripod is stable
and steady.
•
Foam rubber leg wraps protect against high and low temperatures and ensure a
secure grip during transport and in use.
Included:
T04X tripod with C-10S head and TY-C10 quick release plate, second centre column (short),
tripod bag, tool, warranty card, instructions
T04X Series Traveler Light.
T04X Series – Flexibility meets colour
The last rays of sun disappear over the horizon, the skyline
before you glows in the evening sky – with the handy and
lightweight T04X series tripods you are just one click away
from the perfect shot, whether on a city break or on an ultimate outdoor adventure.
It takes no time at all for the tripod to be stowed in a bag or
backpack and it is just as quick to get it ready for use again.
Impress your friends with your aluminium tripod in stylish red
or blue. The T04X series tripod is also available in black or in
carbon.
T04X Series Traveler Light.
09
Tripods suitable for use in all weather
„If you go on a journey, you want to tell a story, so I
choose to travel with my tripod and head.“
SIRUI travel tripods combine low weight with an extremely
compact design. With easy handling and a secure grip for
camera and lens in every situation the Traveler tripod is a
reliable assistant on your travels.
10
simply better.
simply precise.
11
TX Series and TXL Series
Travel tripods – compact, comfortable, lightweight, sturdy
Head support plate
The aluminium head support plate is fitted with a set screw to secure
the head.
Head mounting screw
The head mounting screw quickly switches from 1/4“ to 3/8“.
Centre column and short centre column
The height of the centre column is adjustable and it is reversible. Switching to the short centre column makes all shooting positions possible.
Both centre columns allow ground-level shots and for the overall
height to be increased.
Twist locks
Sealed twist locks with rubber for grip.Just half a turn and the legs will
start to descend. The locks can be disassembled for maintenance.
Rubber feet with twist-out steel spikes
The T-1***X and T-1***XL tripods are stable and will not slip on rubber
feet. The T-2***X and T-2***XL tripods have twist-out metal spikes,
intended for use on soft and uneven surfaces.
TXL series also with head
TXL series tripods are also available as tripod sets with E series ball
heads (page 32):
T-1004XL/E-10 · T-1204XL/E-10 · T-2004XL/E-20 · T-2204XL/E-20
Model
Material
Sections
ø Tube
T-1004X
Alu
4
16-25
T-1204X
Carbon
4
T-1005X
Alu
5
T-1205X
Carbon
5
13-25
T-2004X
Alu
4
19-28
T-2204X
Carbon
4
19-28
T-2005X
Alu
5
16-28
T-2205X
Carbon
5
T-1004XL
Alu
4
min. height Height max. height Pack size
Monopod height
Weight
Load
Leg angles
-
1.20
10
20-52-83
415
-
0.94
10
20-52-83
350
-
1.10
10
21-53-85
350
-
0.90
10
21-53-85
422
-
1.56
15
21-52-81
1425
422
-
1.26
15
21-52-81
1430
384
-
1.45
12
21-51-84
135
1166
1405
415
16-25
135
1166
1405
13-25
125
1122
1302
125
1122
1302
140
1205
1425
140
1205
130
1230
16-28
130
1230
1430
384
-
1.23
12
21-51-84
16-25
140
1316
1600
465
-
1.23
12
23-53-86
T-1204XL Carbon
4
16-25
140
1316
1600
465
-
1.00
12
23-53-86
T-2004XL
4
19-28
145
1360
1625
470
-
1.67
15
23-53-86
4
19-28
145
1360
1625
470
-
1.34
15
23-53-86
Alu
T-2204XL Carbon
Size in millimetres, weight in kilograms, leg angles in degrees.
12
Additional Features:
•
Folds up by 180° - the legs can be fully folded up from 0-180°, reducing the size
and completely enclosing the head. Three solid ratchet steps allow flexible use.
•
Leg angle locking mechanism – the legs lock automatically when folding down.
•
Stabilising carabiner – loading weight onto the hook ensures the tripod is stable
and steady.
•
Foam rubber leg wraps protect against high and low temperatures and ensure a
secure grip during transport and in use.
Included:
TX or TXL tripod, second centre column (short), tripod bag with strap, tool, warranty card,
instructions
TX/TXL Series Traveler Tripods.
ET Series
Travel tripods with clip locks – compact, comfortable, lightweight, sturdy
Head support plate
The aluminium head support plate is fitted with a set screw to secure
the head.
Head mounting screw
The head mounting screw quickly switches from 1/4“ to 3/8“.
Centre column and short centre column
The height of the centre column is adjustable and it is reversible. Switching to the short centre column makes all shooting positions possible.
Both centre columns allow ground-level shots and for the overall
height to be increased.
Clip locks
Sealed clip locks for quick and easy use. The practical clip locks open
quickly and the leg section extends quickly.
Rubber feet with twist-out steel spikes
The ET-1004 and ET-1204 tripods are stable and will not slip on rubber
feet. The ET-2004 and ET-2204 tripods have twist-out metal spikes,
intended for use on soft and uneven surfaces.
ET series also with head
ET series tripods are also available as tripod sets with E series ball
heads (page 32):
ET-1004/E-10 · ET-1204/E-10 · ET-2004/E-20 · ET-2204/E-20
Model
Material
Sections
ø Tube
ET-1004
Alu
4
16-25
min. height Height max. height Pack size
130
ET-1204
Carbon
4
16-25
130
ET-2004
Alu
4
19-28
135
ET-2204
Carbon
4
19-28
135
1205
Size in millimetres, weight in kilograms, leg angles in degrees.
1150
Monopod height
Weight
Load
Leg angles
-
1.30
8
20-52-83
420
-
1.04
8
20-52-83
430
-
1.65
12
21-52-81
430
-
1.37
12
21-52-81
1390
420
1150
1390
1205
1440
1440
Additional Features:
•
Folds up by 180° - the legs can be fully folded up from 0-180°, reducing the size
and completely enclosing the head. Three solid ratchet steps allow flexible use.
•
Leg angle locking mechanism – the legs lock automatically when folding down.
•
Stabilising carabiner – loading weight onto the hook ensures the tripod is stable
and steady.
•
Foam rubber leg wraps protect against high and low temperatures and ensure a
secure grip during transport and in use.
Included:
ET tripod, second centre column (short), tripod bag with strap, tool, warranty card,
instructions
ET Series Easy Traveler Tripods.
13
simply practical.
Am liebsten ein Doppelseitenfoto im Panormaformat mit NX- oder W-Serie
14
Universal tripods – convertible all-rounders
For that little bit extra, SIRUI offers its Universal tripods
with detachable monopod. This allows you to take more
equipment without any extras.
As a tripod, it keeps your camera safe in all weather then,
in no time, it transforms into a monopod, including hand
strap. Stay flexible with SIRUI and have the right equipment available in any situation.
15
NX Series
Tripods with integrated monopod – universally useful
Head support plate
The aluminium head support plate is fitted with a set screw to secure
the head.
Head mounting screw
The head mounting screw quickly switches from 1/4“ to 3/8“.
Sectioned centre column
The centre column can be split up, its height can be adjusted and it is
reversible, meaning that all shooting positions are possible. The flexibility of the centre column allows ground-level shots to be taken as well
as allowing the total height of the tripod to be increased.
Integrated monopod
The NX series has a complete monopod integrated. Simply remove the
leg from the tripod and fit the second head support plate and wrist
strap. The other mounting plate can remain on the tripod, which is
practical and saves times.
Twist locks
Sealed twist locks with rubber for grip. Just half a turn and the legs will
start to descend. The locks can be disassembled for maintenance.
Rubber feet with twist-out steel spikes
The N-1***X and N-1***XL tripods are stable and will not slip on rubber
feet. The N-2***X and N-3***X tripods have twist-out metal spikes,
intended for use on soft and uneven surfaces.
Model
Material
Sections
ø Tube
N-1004X
Alu
4
16-25
min. height Height max. height Pack size
140
1325
1607
468
Monopod height
Weight
Load
Leg angles
427-1563
1.40
12
21-51-83
N-1204X
Carbon
4
16-25
140
1325
1607
468
427-1563
1.12
12
21-51-83
N-1205X
Carbon
5
13-25
135
1325
1543
418
377-1505
1.10
10
21-52-83
N-2004X
Alu
4
19-28
145
1338
1605
473
434-1602
1.80
15
21-52-84
N-2204X
Carbon
4
19-28
145
1338
1605
473
434-1602
1.48
15
21-52-84
N-2205X
Carbon
5
16-28
140
1435
1666
435
397-1640
1.47
12
20-51-83
N-3004X
Alu
4
22-32
150
1461
1750
515
472-1756
2.33
18
20-51-83
N-3204X
Carbon
4
22-32
150
1461
1750
515
472-1756
1.81
18
20-51-83
N-3203X
Carbon
3
25-32
165
1405
1770
587
545-1754
1.82
15
22-51-81
N-3205X
Carbon
5
19-32
140
1375
1582
432
393-1582
1.76
15
20-51-83
Additional Features:
•
Folds up by 180° - the legs can be fully folded up from 0-180°, reducing the size
and completely enclosing the head. Three solid ratchet steps allow flexible use.
•
Leg angle locking mechanism – the legs lock automatically when folding down.
•
Stabilising carabiner – loading weight onto the hook ensures the tripod is stable
and steady.
•
Foam rubber leg wraps protect against high and low temperatures and ensure a
secure grip during transport and in use.
Included:
NX tripod, 2 mounting plates, wrist strap, tripod bag with strap, tool, warranty card, instructions
Size in millimetres, weight in kilograms, leg angles in degrees.
16
NX Series Universal Tripods with Monopod.
EN Series
Tripods with integrated monopod and clip locks – universally useful
Head support plate
The aluminium head support plate is fitted with a set screw to secure
the head.
Head mounting screw
The head mounting screw quickly switches from 1/4“ to 3/8“.
Sectioned centre column
The centre column can be split up, its height can be adjusted and it is
reversible, meaning that all shooting positions are possible. The flexibility of the centre column allows ground-level shots to be taken as well
as allowing the total height of the tripod to be increased.
Integrated monopod
The EN series has a complete monopod integrated. Simply remove the
leg from the tripod and fit the second head support plate and wrist
strap. The other mounting plate can remain on the tripod, which is
practical and saves times.
Clip locks
Sealed clip locks for quick and easy use. The practical clip locks open
quickly and the leg section extends quickly.
Rubber feet with twist-out steel spikes
EN series tripods are stable and will not slip on rubber feet and also
have twist-out metal spikes, intended for use on soft and uneven
surfaces.
Model
Material
Sections
ø Tube
Monopod height
Weight
Load
Leg angles
EN-2004
Alu
4
19-28
min. height Height max. height Pack size
145
1335
1620
480
445-1615
1.88
15
23-54-85
EN-2204
Carbon
4
19-28
145
1335
1620
480
445-1615
1.52
15
23-54-85
Additional Features:
•
Folds up by 180° - the legs can be fully folded up from 0-180°, reducing the size
and completely enclosing the head. Three solid ratchet steps allow flexible use.
•
Leg angle locking mechanism – the legs lock automatically when folding down.
•
Stabilising carabiner – loading weight onto the hook ensures the tripod is stable
and steady.
•
Foam rubber leg wraps protect against high and low temperatures and ensure a
secure grip during transport and in use.
Included:
EN tripod, 2 mounting plates, wrist strap, tripod bag with strap, tool, warranty card, instructions
Size in millimetres, weight in kilograms, leg angles in degrees.
EN Series Easy Universal Tripods with Monopod.
17
W Series
Tripods with integrated monopod - waterproof - dustproof
Head support plate
The aluminium head support plate is fitted with a set screw to secure
the head.
Head mounting screw
The head mounting screw quickly switches from 1/4“ to 3/8“.
Sectioned centre column
The centre column can be split up, its height can be adjusted and it is
reversible, meaning that all shooting positions are possible. The flexibility of the centre column allows ground-level shots to be taken as well
as allowing the total height of the tripod to be increased.
Integrated monopod
The W series has a complete monopod integrated. Simply remove the
leg from the tripod and fit the second head support plate and wrist
strap. The other mounting plate can remain on the tripod, which is
practical and saves times.
Waterproof twist locks
Specially sealed ring locks with rubber for grip. This makes the tripod
water proof and dust proof. Just half a turn and the legs will start to
descend. The locks can be disassembled for maintenance.
Rubber feet and stainless steel spikes
W series tripods are all equipped with three rubber feet and three
metal spikes. The rubber feet are ideal on firm, level ground. The metal
spikes show their strength on soft, uneven ground. The tripod is equipped for all terrains.
10x
CARBON
Guaranteed
SIRUI Quality
WATERPROOF
Material
Sections
ø Tube
W-1004
Model
Alu
4
15-26
145
W-1204
Carbon
4
15-26
W-2004
Alu
4
19-29
W-2204
Carbon
4
19-29
min. height Height max. height Pack size
Monopod height
Weight
Load
Leg angles
1370
1665
490
445-1630
1.80
15
22-51-82
145
1370
1665
490
445-1630
1.45
15
22-51-82
155
1455
1782
520
480-1770
2.20
18
22-51-82
155
1455
1782
520
480-1770
1.76
18
22-51-82
Size in millimetres, weight in kilograms, leg angles in degrees.
18
DUSTPROOF
Additional Features:
•
Folds up by 180° - the legs can be fully folded up from 0-180°, reducing the size
and completely enclosing the head. Three solid ratchet steps allow flexible use.
•
Leg angle locking mechanism – the legs lock automatically when folding down.
•
Stabilising carabiner – loading weight onto the hook ensures the tripod is stable
and steady.
•
Foam rubber leg wraps protect against high and low temperatures and ensure a
secure grip during transport and in use.
Included:
W tripod, 3 rubber feet, 3 spikes, 2 mounting plates, wrist strap, tripod bag with handle, tool,
warranty card, instructions
W Series waterproof Tripods with Monopod.
Tripods with rubber boots
Water, waves, wilderness – this is how the W series
is best described. Enjoy outdoor photography
without compromise. These tripods will hold fast!
No water or dust will find its way into the sealed
leg locks. These tripods will not leave you out in
the rain, unless you want them to.
Waterproof Tripods with Monopod.
19
simply huge.
20
Gigantic when filming and photographing
With K-40X head
275cm
With RX-66C column
263cm
R-5214XL height
200cm
The RX series tripods are the giants of SIRUI tripods. And if up
to two metres high is not enough, you can add the optional
RX-66C centre column to reach a stunning 2.63m.
You want to film? No problem – simply replace the mounting
plate with the 75mm levelling ball, add the video head and go.
The stability and handling will inspire and convince.
And in order that this giant does not weigh too much, SIRUI
has made the legs from super-lightweight and precisionbalanced 10-layer carbon.
Jenny‘s height
164cm
21
R Series
Tripods for in the studio and on location
Head support plate
The aluminium head support plate is fitted with a set screw to secure
the head.
Head mounting screw
The head mounting screw quickly switches from 1/4“ to 3/8“.
Centre column
The height of the centre column can be adjusted and it is reversible,
meaning that all shooting positions are possible. The flexibility of the
centre column allows ground-level shots to be taken as well as allowing the total height of the tripod to be increased.
Wing nut
The centre column can be set using a wing nut. This ensures it can be
quickly loosened and securely fastened.
Twist locks
Sealed twist locks with rubber for grip. Just half a turn and the legs will
start to descend. The locks can be disassembled for maintenance.
Rubber feet with twist-out steel spikes
The R-1004 and R-1204 tripods are stable and will not slip on rubber
feet. R-2004 and R-2204 also have twist-out metal spikes, intended
for use on soft and uneven ground.
Material
Sections
ø Tube
Monopod height
Weight
Load
R-1004
Model
Alu
4
16-25
min. height Height max. height Pack size
380
1300
1595
510
-
1.26
10
37-70
R-1204
Carbon
4
16-25
380
1300
1595
510
-
0.95
10
37-70
R-2004
Alu
4
19-28
385
1340
1630
530
-
1.68
15
22-54
R-2204
Carbon
4
19-28
385
1340
1630
530
-
1.32
15
22-54
Size in millimetres, weight in kilograms, leg angles in degrees.
22
Leg angles
Additional Features:
•
Spirit level – a practical level for perfect balance is built into the tripod shoulder.
•
Leg angle locking mechanism – the legs lock automatically when folding down.
Two solid ratchet steps allow flexible use.
•
Stabilising carabiner – loading weight onto the hook ensures the tripod is stable
and steady.
•
Foam rubber leg wraps protect against high and low temperatures and ensure a
secure grip during transport and in use.
Included:
R tripod, tripod bag with strap, tool, warranty card, instructions
R Series Reporter Tripods.
RX Series
Studio Tripod – huge, extremely strong – for photography and filming
Head support plate
The aluminium head support plate is fitted with a 3/8“ screw to secure
the attached equipment. In order to prevent accidentally rotating the
equipment, a fixing screw is located in the mounting plate.
75mm levelling collar
Included is the RX-75A 75mm half collar adapter which can be placed
against the mounting plate as necessary. A suitable levelling half-ball for
ideal alignment is, for example, the optional SIRUI RX-75B (page 46).
Centre column (optional)
The RX-66C centre column (page 46) for the RX series is an optional
extra. 63.5cm additional height when extended. The RX-66C makes
the RX video tripod an extremely flexible photography tripod. Like the
tripod, the centre column is made from 10 layers of carbon.
Twist locks
Sealed twist locks with rubber for grip. Just half a turn and the legs will
start to descend. The locks can be disassembled for maintenance.
Rubber feet and stainless steel spikes
RX series tripods are all equipped with three rubber feet and three
metal spikes. The rubber feet are ideal on firm, level ground. The metal
spikes show their strength on soft, uneven ground. The tripod is equipped for all terrains.
10x
CARBON
Guaranteed
SIRUI Quality
Model
Material
Sections
ø Tube
R-4213X
Carbon
3
28-36
min. height Height
105
R-4214X
Carbon
4
24-36
90
1500
R-5214X
Carbon
4
28-40
90
1600
R-5214XL Carbon
4
28-40
100
2000
2635*
1500
max. height Pack size Monopod height Weight
2135*
2.4
Load
Leg angles
25
25-54-84
660
-
2135*
550
-
2.5
25
25-54-84
2235*
580
-
2.8
30
26-56-85
690
-
3.0
30
26-56-85
Size in millimetres, weight in kilograms, ratchet angles in degrees. *Height with RX-66C centre column (optional extra).
Additional Features:
•
Spirit level – a level for perfect balance is located on the tripod shoulder.
•
Leg angle locking mechanism – the legs lock automatically when folding down.
Three solid ratchet steps allow flexible use.
•
Stabilising carabiner – loading weight onto the hook ensures the tripod is stable and steady. An Allen key is located in the hook to allow the mounting plate or
levelling ball to be fitted.
•
Foam rubber leg wraps protect against high and low temperatures and ensure a
secure grip during transport and in use.
Included:
RX tripod, 3 rubber feet, 3 spikes, RX-75A levelling half ball, tripod bag with handle, tool,
warranty card, instructions
RX Series Reporter X Tripods.
23
SN Series
Tripods with integrated monopods – folds flat
Head support plate
The aluminium head support plate is fitted with a set screw to secure
the head.
Head mounting screw
The head mounting screw quickly switches from 1/4“ to 3/8“.
Centre column and short centre column
The height of the centre column is adjustable and it is reversible. Switching to the short centre column makes all shooting positions possible.
Both centre columns allow ground-level shots and for the overall
height to be increased.
Integrated monopod
The SN series has a complete monopod integrated. Simply remove the
leg from the tripod and fit the second head support plate and wrist
strap. The other mounting plate can remain on the tripod, which is
practical and saves times.
Twist locks
Sealed twist locks with rubber for grip. Just half a turn and the legs will
start to descend. The locks can be disassembled for maintenance.
Rubber feet with twist-out steel spikes
The S-2204-N and S-2205-N tripods are stable and will not slip on
rubber feet and also have twist-out metal spikes, intended for use on
soft and uneven surfaces.
Sections
ø Tube
Monopod height
Weight
Load
S-2204-N Carbon
Model
Material
4
19-28
min. height Height max. height Pack size
175
1155
1375
480
400-1520
1.40
15
21-73
S-2205-N Carbon
5
16-28
180
1215
1370
450
370-1530
1.40
15
21-73
Size in millimetres, weight in kilograms, leg angles in degrees.
24
Leg angles
Additional Features:
•
Folds flat – the refined fold-flat technology means that SN tripods save space
when packed in suitcases and backpacks.
•
Spirit level – a level for perfect balance.
•
Leg angle locking mechanism – the legs lock automatically when folding down.
Two solid ratchet steps allow flexible use.
•
Stabilising carabiner – loading weight onto the hook ensures the tripod is
stable and steady.
•
Foam rubber leg wraps protect against high and low temperatures and ensure a
secure grip during transport and in use.
Included:
SN tripod, 2 centre columns (short), 2 mounting plates, wrist strap, tripod bag with strap,
tool, warranty card, instructions
SN Series Snap Universal Tripods with Monopod.
BCT Series
Broadcast Video tripods – Tripods for the perfect film
Levelling half ball
The BCT-2003 and BCT-2203 tripods feature a permanent 75mm half
ball, the BCT-3002, BCT-3202, BCT-3003 and BCT-3203 tripods feature a 100mm half ball. The ideal video head for the BCT series is the
SIRUI BCH series head (page 37).
Centre and floor spreader
The comfortable centre spread makes this tripod indispensable for
professional film makers. The tripod spreaders are removable, can be
individually adjusted and increase the stability of the tripod.
Twist locks
The large aluminium screw heads are particularly useful, ensuring sure
and quick manipulation.
Double tube legs
The lower sections of the legs are made of one tube and the upper
sections of two. This increases stability and reduces the likelihood of
vibration. Tripod legs are made of only two or three sections for quick
setup and takedown.
Double spikes and rubber feet
When working without the spreader and on soft surfaces, the double
spikes can be covered with stable rubber feet (included).
10x
CARBON
Guaranteed
SIRUI Quality
Model
Material
Sections
ø Tube
BCT-2003
Alu
3
16-22
BCT-2203
Carbon
3
BCT-3002
Alu
2
BCT-3202
Carbon
2
min. height Height
max. height Pack size Monopod height Weight
435
1600
-
16-22
435
1600
19
670
1500
19
670
1500
Load
Leg angles
10
infininte
3.7
10
infininte
4.8
25
infininte
25
infininte
750
-
4.1
-
750
-
-
895
-
-
895
-
4.3
BCT-3003
Alu
3
19-25
445
1600
-
750
-
5.0
18
infininte
BCT-3203
Carbon
3
19-25
445
1600
-
750
-
4.5
18
infininte
Size in millimetres, weight in kilograms, leg angles in degrees.
Included:
BCT tripod, centre spreader, floor spreader, 3 rubber feet, tripod bag with strap, tool,
warranty card, instructions
BCT Series Broadcast Tripods.
25
P Series and PC Series
Monopods – lightweight, compact, comfortable
Head support plate
The aluminium head support plate is fitted with a set screw (not P-306
or P-326) to secure the head.
Head mounting screw
The head mounting screw quickly switches from 1/4“ to 3/8“.
Wrist strap
A practical wrist strap improves safety when transporting and when
photographing.
Belt clip or carabiner
The P-204, P-204C, P-224, P-224C, P-324 and P-424 monopods have
a belt clip and the P-306 and P-326 monopods have a carabiner on
the wrist strap so that the monopod can be attached to the belt for
transport.
Twist locks
Sealed twist locks with rubber for grip. Just half a turn and the legs will
start to descend. The locks can be disassembled for maintenance. The
PC series has short sections for small hands and a reduced pack size.
Rubber foot with twist-out steel spike
The rubber foot includes a twist-out metal spike so that the monopod
can be securely held on soft and hard ground. Suitable for all terrains.
P-224
P4 Series
Model
P-204
Material
Sections
ø Tube
min. height
max. height
Weight
Load
Alu
4
19-28
550
1700
0.64
10
Belt clip
P-224C
PC Series
P-326
P6 Series
Others
Alu
4
19-28
520
1700
0.56
10
Belt clip, short sections
P-224
Carbon
4
19-28
550
1700
0.53
10
Belt clip
P-224C
Carbon
4
19-28
520
1700
0.44
10
Belt clip, short sections
P-324
Carbon
4
22-32
555
1690
0.63
10
Belt clip
Weitere Features:
•
Foam rubber leg wrap for use in high and low temperatures, ensures a secure
grip during transport and use. With the grippy cold weather wrap, any panorama
is available.
P-424
Carbon
4
25-36
564
1710
0.74
15
Belt clip
•
P-306
Alu
6
16-32
392
1550
0.56
8
Carabiner, compass
P-326
Carbon
6
16-32
392
1550
0.45
10
Carabiner, compass
P-204C
Size in millimetres, weight in kilograms
26
P-306 and P-326 are equipped with a compass.
Included:
P or PC monopod, tool, warranty card, instructions
P/PC Series Monopods.
Monopod – the lightweight alternative to
a tripod
If time is of the essence, if there is insufficient light or
whenever you need help holding your camera, a monopod is essential.
Although SIRUI monopods only have one leg, they have
a lot of accessories, such as a wrist strap, belt clip or
compass. Let the monopod be your third leg and don‘t
miss a single picture.
SIRUI monopod code
Version
Sections
Material
Size
Series
n
8x Carbo
m
Aluminiu
P-224C
Material: 0 Alu, 2 Carbon
Monopods.
27
PS Series
Multi-function Video/Photo Monopods – 20° tilt function, 360° panorama function
Head support plate
The aluminium head support plate is fitted with a set screw to secure
the head.
360°
360°
20°
20°
Head mounting screw
The head mounting screw quickly switches from 1/4“ to 3/8“.
360° Panorama function
The upper section with the foam leg wrap can be rotated by 360° for
video panning shots or panoramic views. This stops at the top blue
twist lock which also serves to lock the rotation.
360°
360°
Twist locks
Sealed twist locks with rubber for grip. Just half a turn and the legs will
start to descend. The locks can be disassembled for maintenance.
20° Tilt in all directions
A special feature is the tilting function. The section of the monopod
that is above the spreader can be tilted by between 0° and 20° in any
direction. Simply loosen the blue twist lock, adjust the friction and tilt.
Spreader/Table-top tripod
The spreader can be detached and used as a table-top tripod. Without
the spreader, it becomes a normal monopod which can be fitted with a
rubber foot or metal spike as required.
10x
CARBON
Guaranteed
SIRUI Quality
Model
Material
Section
ø Tube
min. height
max. height
Tilt
Rotation
Foot length
Height
Weight
Load
P-204S
Alu
4
19-28
700
1600
20°
360°
170
185
1.40
8
P-224S
Carbon
4
19-28
700
1600
20°
360°
170
185
1.30
8
P-324S
Carbon
4
22-32
745
1755
20°
360°
230
185
1.45
10
12
P-424S
Carbon
4
25-36
785
1910
20°
360°
230
185
1.58
P-326S
10x Carbon
6
15-29
555
1500
20°
360°
170
185
1.32
8
P-426S
10x Carbon
6
19-33
568
1590
20°
360°
170
185
1.42
10
Size in millimetres, weight in kilograms.
28
Additional Features:
•
Wrist strap – a practical wrist strap improves safety when transporting and
when photographing. The P-326S and P-426S monopods both have a belt clip
on the wrist strap to allow the monopod to be carried on the belt.
•
Foam rubber leg wrap protects against high and low temperatures and ensures
a secure grip during transport and in use. With the grippy cold weather wrap any
panorama is available.
•
Spreader with fold-up feet. Saves space in storage and is comfortable to move
or transport. Or, simply fold up the feet and use as a normal monopod.
Included:
PS monopod, rubber foot, metal spike, monopod bag with strap, tool, warranty card,
instructions
PS Series Monopod with Spreader.
Monopods with Spreader PS Series
Can you stand on one leg? This can
All-rounder is an understatement. For videographers, the
SIRUI PS monopod is a real alternative to the biggest tripod. However, the range of features on the monopod also
offers photographers plenty of features.
Imagine you are in the park and are able to complete a
video pan or 360° panorama with your monopod. Then,
soon afterwards, you create stunning macro shots with the
spreader on your kitchen table.
The versatility of PS monopods will impress you and
astound others.
Monopods with Spreader.
29
Precision at the
highest level.
30
Precision in the detail.
SIRUI Heads – precision in the detail
Headaches are for yesterday – you can rely on SIRUI‘s
ball heads! Powerful, compact, but with silky smooth
friction, they carry your camera and lens without issue.
All SIRUI heads naturally offer intuitive controls and
attention to detail, the only way to ensure that your
creativity has no limits.
Whether you are a beginner or a professional, whether
your camera is large or small, you can be sure that SIRUI
has a range of suitable, reliable ball heads.
Ball heads.
31
CS Series Ball heads
E Series Ball heads
CS Series Ball heads – Entry level in three colours
E Series Ball heads – Mid-range for professionals and amateurs
•
•
•
•
•
•
•
Safety Lock System with Security Pin
Knurled metal screws
TY-C10 quick release plate – Arca Swiss compatible, rubber surface, 1/4“
screw, 3 slots
Quick release plate
Plate lock
Vertical notch
Safety Lock
Safety Lock System with Security Pin
Knurled metal screws
Spirit level for perfect balance
TY-50E quick release plate – Arca Swiss compatible, rubber surface, 1/4“ U-bolt
Plate lock
Quick release plate
Spirit level
Safety Lock
Vertical notch
Ball lock
Base lock
360° Panorama base
5° Graduated scale
Ball lock
Base lock
5° Graduated scale
360° Panorama base
0
Head
Material
Colour
Safety Lock
Rotation
Scale
ø Base
ø Ball
Height
Weight
0
Load
C-10S
Alu
black
Yes
360°
Ja
39
29
88
0.22
4
Head
Material
Colour
Safety Lock
Rotation
Scale
ø Base
ø Ball
Height
Weight
C-10S
Alu
blue
Yes
360°
Ja
39
29
88
0.22
4
E-10
Alu
black
Yes
360°
Yes
43
29
88
0.28
8
C-10S
Alu
red
Yes
360°
Ja
39
29
88
0.22
4
E-20
Alu
black
Yes
360°
Yes
50
36
98
0.35
12
Size in millimetres, weight in kilograms.
32
Size in millimetres, weight in kilograms.
Tripod heads.
Load
GX Series Ball heads
KX Series Ball heads
GX Series Ball heads – top-of-the-range is standard for us
KX Series Ball heads – our top class – design meets technology
•
•
•
•
•
•
•
•
•
•
Safety Lock System with Security Pin
Friction controls on separate knobs
Knurled metal screws
2 spirit levels for perfect balance
TY-50X quick release plate – Arca Swiss compatible, rubber surface, 1/4“
U-bolt, wrist strap eyelet, 3 slots
Safety Lock System with Security Pin
Friction control integrated into ball lock
Control knobs with rubber coating
3 spirit levels for perfect balance
TY-50 (K-10X), TY-60 (K-20X), TY-70-2 (K-30X, K-40X) quick release plates –
Arca Swiss compatible, rubber surface, Sliding Stopper, 1/4“ U-bolt
Quick release plate
Wrist strap eyelet
Plate lock
Quick release plate
Plate lock
Spirit level
Sliding Stopper
Spirit level
Spirit level
Safety Lock
Vertical notch
Friction control
Ball lock
Base lock
5° Graduated scale
360° Panorama base
Safety Lock
Vertical notch
Friction control
Base lock
5° Graduated scale
Ball lock
360° Panorama base
0
0
Head
Material
Colour
Safety Lock
Rotation
Scale
ø Base
ø Ball
Height
Weight
Load
K-10X
Alu
black
Yes
360°
Yes
49
33
93
0,35
20
Head
Material
Colour
Safety Lock
Rotation
Scale
ø Base
ø Ball
Height
Weight
Load
K-20X
Alu
black
Yes
360°
Yes
54
38
98
0,40
25
G-10X
Alu
black
Yes
360°
Yes
43
29
88
0.30
18
K-30X
Alu
black
Yes
360°
Yes
60
44
108
0,50
30
G-20X
Alu
black
Yes
360°
Yes
50
36
98
0.36
20
K-40X
Alu
black
Yes
360°
Yes
74
54
125
0,70
35
Size in millimetres, weight in kilograms.
Size in millimetres, weight in kilograms.
Tripod heads.
33
L-10 Tilt head
L-20S Tilt head
L-10 Tilt head – the ideal head for a monopod
L-20S Tilt head – the ultimate head for a monopod
•
•
•
•
•
•
•
•
•
•
•
•
•
Safety Lock System with Security Pin
Knurled metal screws
Spirit level for perfect balance
Infinitely variable tilt function -90°/+90°
Base is Arca Swiss compatible and 3/8“ tripod mount
TY-60 quick release plate – Arca Swiss compatible, rubber surface, Sliding
Stopper, 1/4“ U-bolt
Sliding Stopper
Safety Lock System with Security Pin
Knurled metal screws
3 Spirit level for perfect balance
Infinitely variable tilt function -90°/+90°
Panorama base can be rotated by 360° and locked
Quick release plate can be rotated by 90°
TY-70-2 quick release plate – Arca Swiss compatible, rubber surface, Sliding
Stopper, 1/4“ U-bolt
Sliding Stopper
Quick release plate
Quick release plate
Plate lock
Plate lock
Safety Lock
Spirit level
Safety Lock
Spirit level
5° Graduated scale
5° Graduated scale
Tilt lock
Tilt lock
-/+90° Tilt function
-/+90° Tilt function
5° Graduated scale
Base lock
Base (Arca Swiss compatible)
360° Panorama base
0
0
Head
Material
Colour
Safety Lock
Rotation
Scale
ø Base
Tilt
max. height
Weight
Load
Head
Material
Colour
Safety Lock
Rotation
Scale
ø Base
Tilt
max. height
Weight
Load
L-10
Alu
black
Yes
No
Ja
43
90°
86
0.33
15
L-20S
Alu
black
Yes
360°
Yes
51
90°
103
0.44
25
Size in millimetres, weight in kilograms.
34
Size in millimetres, weight in kilograms.
L Series Tilt heads.
LE-60 Levelling head
PA-20 Panorama base
LE-60 Levelling head – simply and perfectly balanced
PA-20 Panorama base – 360° rotation for panoramas
•
•
•
•
•
•
•
•
•
•
60mm half ball that tilts to all sides by 0°-15° and locks
Spirit level for perfect balance
3 locking screws prevent the tripod head from rotating
3/8“ tripod connection, 1/4“ head connection
Includes 1/4“ and 3/8“ adapter
1/4“ Head connection
Safety Lock System with Security Pin
Knurled metal screws
Spirit level for perfect balance
Panorama base can be rotated by 360° and locked
Connects underneath – Arca Swiss compatible or 3/8“
Locking screw
Locking screw
Safety Lock
Spirit level
60mm Half ball
Spirit level
Base lock
Tilt lock
5° Graduated scale
360° Panorama base
Arca Swiss compatible
1/4“-3/8“ Adapter
0
Head
Material
Colour
Tilt
ø Base
ø Ball
Height
Weight
Load
Head
Material
Colour
Safety Lock
Rotation
Scale
ø Base
ø top
max. height
Weight
Load
LE-60
Alu
black
15°
60
60
44
0.29
15
PA-20
Alu
black
Yes
360°
Ja
58
55
28
0.15
10
Size in millimetres, weight in kilograms.
Size in millimetres, weight in kilograms
Special heads.
35
PH-20 Gimbal head
VA-5 Video head
PH-20 Gimbal head – Panning head
VA-5 Video head – for Arca Swiss compatible release plates
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Carbon bracket made from 8-layer carbon fibre
Infinitely variable tilt function tilts between -60° and +150° and locks
Panorama base can be rotated by 360° and locked
Scales for tilting, height adjustment and 360° rotation
Notched plate swing arm (90mm) and adjustable height
3/8“ tripod connection
120mm quick release plate – Arca Swiss compatible, rubber surface, 2x 1/4“
screws, 1/4“ to 3/8“ adapter included
Safety Lock System with Security Pin
Fluid-damped for smooth panning
2 spirit levels ensure perfect balance
Infinitely variable tilt function tilts between -60° and +90° and locks
Panorama base can rotated by 360° and locked
Arm with rubber grip, 23cm long
3/8“ tripod connection
TY-70A quick release plate – Arca Swiss compatible, rubber surface, 1/4“ and
3/8“ screws
0
Head
Material
PH-20 Carbon
Colour
Rotation
Scale
ø Base
black
360°
Yes
50
Width
Height
Weight
Load
-60°/+150° 230
Tilt
230
1.10
20
Head Material
VA-5
Size in millimetres, weight in kilograms.
36
Alu
Colour
black
Counterbalance Safety Lock Rotation
1
Size in millimetres, weight in kilograms.
Tripod heads.
Yes
360°
ø Base
Tilt
Height
48 -60/+90° 83
Weight
Load
0.53
3
VH Series video heads
BCH Series broadcast video heads
VH Video heads – Fluid Video pan and tilt heads
BCH Broadcast heads – Pan/tilt heads for film professionals
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Safety Lock System with Security Pin
Fluid-damped for smooth panning
2 spirit levels ensure perfect balance
Infinitely variable tilt function tilts between -60° and +90° and locks
Panorama base can rotated by 360° and locked
Extending pan arm with rubber grip 30-47cm
3/8“ tripod connection
Quick release plate – rubber surface, 1/4“ and 3/8“ screws
Safety Lock System with Security Pin
Fluid-damped for smooth panning
2 spirit levels ensure perfect balance
Pan and tilt function with friction damping
Extending pan arm with rubber grip
BCH-10, BCH-20 for 75mm half ball; BCH-30 for 100mm half ball
Head
Friction panning
steps
Friction tilt
steps
Counterbalance
steps
Pan arm
BCH-10
3 steps + 0
3 steps + 0
3 steps 3-6kg
1x 30-47cm
BCH-20
3 steps + 0
3 steps + 0
7 steps 3-10kg
2x 30-47cm
BCH-30
7 steps + 0
7 steps + 0
13 steps 3-18kg
2x 34-51cm
Head
Head Material
Colour
Counterbalance Safety Lock Rotation
ø Base
Tilt
Height
Safety Lock
Rotation
Weight
Load
BCH-10 Alu
Material Colour Counterbalance
black
3-6
Yes
360°
ø Ball
75 -65/+90° 312
Tilt
Height
Weight
1.80
Load
6
VH-10 Alu
black
2
Yes
360°
65 -60/+90° 96
0.92
6
BCH-20 Alu
black
3-10
Yes
360°
75 -65/+90° 338
3.10
10
VH-15 Alu
black
4
Yes
360°
85 -60/+90° 122
1.70
10
BCH-30 Alu
black
3-18
Yes
360°
100 -65/+90° 356
4.60
18
Size in millimetres, weight in kilograms.
Size in millimetres, weight in kilograms.
Video Heads.
37
38
Photography with SIRUI tripods is a pleasure
Every photographer wants to be able to take picturesque landscapes,
breathtaking views, heavenly sunsets and starscapes. In order to be
able to return home with perfect photos, you cannot do without a
SIRUI tripod.
The reason you need a tripod is best known to you. SIRUI will make
sure that you do not miss out on the fun. Smooth closing, softlydescending leg sections, sturdiness on all types of terrain and, of
course, SIRUI has made sure that everything is comfortable and
easily adjustable and aligned.
We are constantly developing new highlights and upgrading existing
ideas. SIRUI wants you to have fun with your photography.
39
Release plates
Release plates
TYuni Series Universal release plates for 1/4“
TY Series Camera specific release plates
•
•
•
•
•
Rubber surface
Arca Swiss compatible
Series
Model
Material
•
•
Width
Depth
1/4“ U-bolt (not TY-C10)
Sliding Stopper (not TY-C10, TY-50E)
Height
Weight
Compatibility
TYuni
TY-C10
Alu
38
30
8.0
15.0
1/4“ Thread
TYuni
TY-50
Alu
39
50
10.8
31.4
1/4“ Thread
TYuni
TY-50E
Alu
39
50
10.8
30.0
1/4“ Thread
TYuni
TY-60
Alu
49
60
10.8
39.4
1/4“ Thread
TYuni
TY-70
Alu
39
70
10.8
37.2
1/4“ Thread
TYuni
TY-70-2
Alu
60
70
10.8
60.3
1/4“ Thread
Size in millimetres, weight in grams.
•
•
1/4“ Camera connection
Prevents twisting
Series
Model
Material
Width
Depth
Height
Weight
Compatibility
TY
TY-D3
Alu
70.0
66.0
14.6
47.7
Nikon D3 D3x D3s D4
TY
TY-D700
Alu
60.0
44.2
10.8
31.5
Nikon D300 D300s D700
TY
TY-D800
Alu
60.0
54.0
10.0
36.0
Nikon D800 D800E
TY
TY-5DII
Alu
45.5
48.0
11.0
28.5
Canon EOS 5D Mark II
TY
TY-5DIII
Alu
62.0
50.0
12.0
39.0
Canon EOS 5D Mark III
TY
TY-BG
Alu
52.0
56.0
13.7
44.0
var. battery grips
TY
TY-LP75
Alu
56.0
74.0
10.8
41.0
large lenses
Size in millimetres, weight in grams.
TYX Series Universal release plates for 1/4“
TYLP Series Universal release plates for harness systems
•
•
•
•
•
•
•
Rubber surface
Arca Swiss compatible
3 Slots
•
•
1/4“ U-bolt
Wrist strap eyelet
Rubber surface
Arca Swiss compatible
1/4“ Connection for harness system
eg. for Carry Speed, Sun Sniper etc.
•
•
•
1/4“ U-bolt
Wrist strap eyelets (not TY-LP40)
Sliding Stopper (not TY-LP40)
Series
Model
Material
Width
Depth
Height
Weight
Compatibility
TYX
TY-50X
Alu
54
50
9.8
33.0
1/4“ Thread
Series
Model
Material
Width
Depth
Height
Weight
Compatibility
TYX
TY-60X
Alu
54
60
9.8
42.0
1/4“ Thread
TYLP
TY-LP40
Alu
39
65
10,8
40,0
1/4“ Thread
TYX
TY-70X
Alu
54
70
9.8
46.0
1/4“ Thread
TYLP
TY-LP70
Alu
69
90
10,8
80,0
1/4“ Thread
Size in millimetres, weight in grams.
Size in millimetres, weight in grams.
40
Wrist strap eyelet (not TY-LP75)
Arca Swiss compatible
Fit for spec. camera model
Quick release plates.
L Brackets
Lens rails/Video plates
TYL Series Camera specific mounting brackets
•
•
•
•
•
Lens rails – more support for cameras with large lenses
For easy transitioning between portrait and landscape
Arca Swiss compatible
Camera ports remain accessible
Suitable for specified camera model
For Canon EOS 6D and 5D MKIII, also available in battery grip version
•
•
•
•
•
•
TY-350 for Arca Swiss compatible heads eg. SIRUI K-30X, K-40X
BP-350 for video heads eg. SIRUI VH Series and BCH-10, BCH-20
Height adjustment 85mm, 25-110mm (camera lens clamp spacing)
TY-70 release plate for camera mounting is included
Lens mount 2x 1/4“ screws, including 1/4“ to 3/8“ adapter
Long pad for lens collar, can be moved to ideal position
Head
Material
Height adjustment
Camera lower edge
to lens collar
Length
Height
weight
TY-350
Alu
85
25-110
422
145
0.45
8
BP-350
Alu
85
25-110
422
145
0.58
10
Load
Size in millimetres, weight in kilograms.
BP Series Universal video release plates for 1/4“ and 3/8“
•
•
Series
Model
Material
Length
Width
Height
Weight
Compatibility
TYL
TY-1DXL
Alu
118
82
127
169
Canon EOS 1D X
TYL
TY-5DIIIL
Alu
114
52
84
91
Canon EOS 5D MKIII
TYL
TY-5DIIILBG
Alu
105
84
135
149
Canon EOS 5D MKIII w. BG
TYL
TY-6DL
Alu
113
45
78
93
Canon EOS 6D
TYL
TY-6DLBG
Alu
118
85
110
139
Canon EOS 6D w. BG
TYL
TY-D4L
Alu
122
87
126
131
Nikon D4
TYL
TY-D800L
Alu
115
61
84
79
Nikon D800 D800E
Rubber surface
Video compatible
•
•
1x 1/4“ screw and 1x 3/8“ screw
Markings for scale
TYL
TY-D750L
Alu
100
55
82
96
Nikon D750
Series
Model
Material
Width
Depth
Height
Weight
Compatibility
TYL
TY-D600L
Alu
110
61
79
70
Nikon D600
BP
BP-90
Alu
51
90
12
66
BCH-10, VH-10, VH-90
TYL
TY-A7IIL
Alu
100
40
60
84
Sony Alpha A7 II
BP
BP-125
Alu
51
125
12
110
BCH-10 + 20, VH-10 + 15, VH-90
TYL
TY-XT1L
Alu
140
55
68
104
Fujifilm X-T1
BP
BP-150L
Alu
80
150
12
200
BCH-30
Size in millimetres, weight in kilograms. BG = Battery grip
Size in millimetres, weight in kilograms.
L Brackets/Lens rails.
41
VSK-5
Video Survival Kit – The Multitool for Videographers
Slider
With the video slider and dolly, smooth tracking shots are easy. An
effect that will amaze. Tube length: 680mm, movement: 430mm.
Dolly
The axles on the dollies are adjustable, so that curves and circles are
possible. The rolling resistance of the wheels can be adjusted, allowing
the tracking speed to be changed.
Cage
Using the cage, it is possible to connect various accessories using a 1/4“
connection, such as lamps, microphones, etc., such that everything is
moved with the camera.
Lowboy/Cage with top grip
The lowboy has the same features as the cage, including a top-mounted grip. Using the top grip, breathtaking footage from ground level can
be shot.
Rig
All good photo kits need a rig. Mounting the camera and accessories
onto the shoulders eases the pressure on the cameraman and steadies the equipment.
Additional Features:
•
Travel backpack – the whole kit is supplied in a comfortable backpack
(46x36x15cm) so that all parts are well protected and can be stored securely.
The total weight, including backpack, is just 6kg (3.8kg without backpack)
•
No tools – no tools are required for setting up or changing.
Note:
Model
Material
Length
Width
Height
Weight
Load
Slider
Alu/Carbon
863
198
85
1.37
8
Dolly
Alu
262
165
58
0.63
12
Cage
Alu/Carbon
326
209
295
1.22
4
Lowboy Alu/Carbon
326
209
366
1.34
4
Rig
849
326
315
1.80
4
Alu/Carbon
•
Included:
1x backpack with divisions, 1x dolly, 2x slider endblock, 1x cage/rig handle unit, 1x terminal
block with camera recorder, 1x Z bracket, 1x top bracket, 1x top grip, 1x shoulder pad, 2x
400x15mm male/female carbon tubes, 2x 400x15mm female/female carbon tubes, 8x
200x15mm female/female carbon tubes, 4x connecting bolts, 8x end caps
Size in millimetres, weight in kilograms.
42
The cage and the rig will share some elements of the set so are not yet available.
The slider and dolly can be used together with the cage or the rig.
Video equipment.
Video Survival Kit VSK-5
Backpack open… and action
Wherever you want to shoot your striking, action-packed movies, the
SIRUI VSK-5 is on your back and each element is quickly ready to use.
Chases, pans, circles are no longer a problem with the Video Survival Kit.
You will especially come to love the practical backpack kit if you want to
change location and move to rough terrain.
Video equipment.
43
VTJ-1.8
Video Travel Jib – mobile camera crane
Camera mounting plate
Two mounting plates are included, one with 1/4“, 3/8“ and one with a
75mm half ball. The 75mm half ball can be used with either video heads
(eg. SIRUI BCH-10, BCH-20) or levelling half balls (eg. SIRUI Y-75B or
RX-75B).
Auto-levelling System
The auto-levelling system keeps the camera horizontal and guarantees
distortion-free images.
360° rotation and 45° tilt
Once the weight of the camera has been balanced with the counterweight, stunning 360° pans and 45° tilts can be made.
Telescopic extension
The flexibility of the telescopic extension supports your flexibility in
recording. Depending on the space or filming situation, the length of
the crane can be adjusted from 1.27m to 2.13m (working length about
1.82m).
Monitor platform
An additional platform for mounting a monitor is located on the centre
axis so that you can see what your camera sees.
Additional Features:
•
Counter weight – The counterweight is placed at the other end of the crane to
ensure gentle camera movements. The counterweight is a rubber doughnut
that can be filled with water (up to about 5 litres) or sand.
•
Locking knob – The large, strong locking knob is very comfortable and practical
to use.
•
Carry case – Everything can be stowed into the padded carry case for transport.
10x
CARBON
Guaranteed
SIRUI Quality
Included:
Model
Material
Tube material
Rotation
Tilt
Width
VTJ-1.8
Alu
10x Carbon
360°
+45°/-45°
1270-1820
Height
Depth
225-1090 82
Pack size
Weight
Load
830
2.7
4.5
Size in millimetres, weight in kilograms.
44
Video equipment.
1x SIRUI VTJ-1.8, 2x 1/4“ and 3/8“ mounting plates, 1x 75mm half ball mounting plate,
1x counterweight (fillable), 1x carry case
*Tripod not included
Video Travel Jib VTJ-1.8
A camera crane for on the move and in the studio
The SIRUI VTJ-1.8 Video Travel Jib is a transportable camera crane
which can be quickly and conveniently packed into the padded
case, included.
The crane will easily lift your heavy video equipment into the air,
enabling you to shoot impressive perspectives.
Video equipment.
45
Tripod accessories
SIRUI RX-66C Carbon centre column for RX tripods
SIRUI MP-20 Quick release base
The SIRUI RX-66C is a centre column for RX series tripods. It is made from 10
layer carbon fibre and allows the tripod to benefit from an additional 63.5cm
of height.
The MP-20 base fits on tripod heads with a removable base (1/4“ or 3/8“ thread). The Safety Lock
System secures the release plate (only for use with compatible plates). Three spirit levels ensure
accurate balance. The MP-20 base is Arca Swiss compatible.
For ground-level shots, the column can be used upside-down. For extra
stability, the tripod stabilisation hooks can be loaded with weight. This also
functions as a mounting tool.
The reversible screw for tripod heads or other equipment has 1/4“ and 3/8“
threads.
Suitable for the following SIRUI tripods:
R-4213X, R-4214X, R-5214X, R-5214XL
•
•
•
•
•
Width: 78mm, Depth: 56mm, Height: 20mm, Weight: 80g
SIRUI VH-90 Quick release platform with VH-125 release plate
Sections: 2
Tube diameter: 28-32mm
Height: 390mm
Operational range: 115-635mm
Weight: 500g
The platform fits on tripods and monopods with 3/8“
threads and is suitable for larger video cameras and camcorders. The Safety Lock System prevents release plates
from slipping. A spirit level ensures that the plate is fully
horizontal.
The 125mm long VH-125 quick release plate can be locked
using a lever.
Width: 101mm, Depth: 125mm, Height: 22mm, Weight: 330g
SIRUI RX-75B ø75mm Levelling half ball
SIRUI KP-59 59mm head plate, tripod screw and wrist strap
For aligning an assembled tripod head. The RX-75B has been specially designed for use with the RX
series of tripods. Three locking screws prevent the assembled tripod head from twisting.
Using the 59mm diameter plate, it is possible to
mount large heads onto the tripod.
•
•
•
•
The screw has a thread of either 1/4“ or 3/8“.
Head contact surface: ø 92mm
Head connection: 3/8“ Thread
Grip length: 140mm
Total height: 205mm
•
•
•
Tilt: 0°-10° (any direction)
Weight: 368g
Load: 18kg
The wrist strap is particularly suitable for monopods.
SIRUI BS-14 1/4“ U-bolt for quick release plates
Replacement or additional screw for
SIRUI quick release plates, with handle and Allen key.
Stainless steel, 1/4“ thread, diameter with bracket: 20mm, Height: 11mm, Weight: 6g
SIRUI TA-14 3/8“ to 1/4“ adapter
1. Adapts a 3/8“ female thread into a 1.4“ female thread
2. Adapts a 1/4“ male thread into a 1.4“ male thread
Female thread: 1/4“, Male thread 3/8“, Diameter: 10mm, Weight: 2g
46
Tripod accessories.
SIRUI Product directory
Code
Description
Page
Code
Description
Page
Code
Description
Page
Code
Description
Page
Code
Description
Page
3T-35 black
3T-35 red
BCT-2003
BCT-2203
BCT-3002
BCT-3003
BCT-3202
BCT-3203
BCH-10
BCH-20
BCH-30
BP-90
BP-125
BP-150L
BP-350
BS-14
C-10S black
C-10S blue
C-10S red
E-10
E-20
EN-2004
EN-2204
ET-1004
ET-1204
ET-2004
ET-2204
G-10X
Mini tripod
P. 06
G-20X
K-10X
K-20X
K-30X
K-40X
KP-59
L-10
L-20S
LE-60
MP-20
N-1004X
N-1204X
N-1205X
N-2004X
N-2204X
N-2205X
N-3004X
N-3203X
N-3204X
N-3205X
P-204
P-204C
P-204S
P-224
P-224C
P-224S
P-306
P-324
Ball head
P. 33
Monopod
P. 28
P. 07
P. 40
P. 33
Monopod
P. 26
Tripod
P. 08
Lens rail
P. 41
P. 33
Monopod
P. 28
Tripod
P. 07
Ball head
P. 33
Monopod
P. 26
Tripod
P. 12
Ball head
P. 33
Monopod
P. 28
Tripod
P. 12
Head plate
P. 46
Monopod
P. 28
Tripod
P. 12
Tilt head
P. 34
Panorama base
P. 35
Tripod
P. 12
Tilt head
P. 34
Gimbal head
P. 36
Tripod
P. 12
Levelling head
P. 35
Release plate
P. 36
Tripod
P. 12
Release base
P. 46
Release plate
P. 36
Tripod
P. 12
Tripod
P. 16
Tripod
P. 22
Tripod
P. 12
Tripod
P. 16
Tripod
P. 22
Tripod
P. 12
Tripod
P. 16
Tripod
P. 22
Tripod
P. 12
Tripod
P. 16
Tripod
P. 22
Tripod
P. 16
Tripod
P. 23
Tripod
P. 16
Tripod
P. 23
Tripod
P. 16
Tripod
P. 23
Tripod
P. 16
Tripod
P. 16
Tripod
P. 16
Monopod
P. 26
Monopod
P. 26
Monopod
P. 28
Monopod
P. 26
TY-70X
TY-350
TY-A7IIL
TY-BG
TY-C10
TY-D3
TY-D4L
TY-D600L
TY-D700
TY-D750L
TY-D800
TY-D800L
TY-LP40
TY-LP70
TY-LP75
TY-XT1L
VA-5
VH-10
VH-15
VH-90
W-1004
W-1204
W-2004
W-2204
Release plate
Ball head
Monopod
P. 26
Monopod
P. 28
Monopod
P. 26
Monopod
P. 26
T-005X red
T-024X
T-025X
T-1004X
T-1004XL
T-1204X
T-1204XL
T-1205X
T-2004X
T-2004XL
T-2005X
T-2204X
T-2204XL
T-2205X
TY-1DXL
TY-5DII
TY-5DIII
TY-5DIIIL
TY-5DIIILBG
TY-6DL
TY-6DLBG
TY-50
TY-50E
TY-50X
TY-60
TY-60X
TY-70
TY-70-2
Tripod
Ball head
P-324S
P-326
P-326S
P-424
P-424S
P-426S
PA-20
PH-20
PH-120
PH-180
R-1004
R-1204
R-2004
R-2204
R-4213X
R-4214X
R-5214X
R-5214XL
RX-66C
RX-75B
S-2204-N
S-2205-N
TA-14
T-004X black
T-004X blue
T-004X red
T-005X black
T-005X blue
Mini tripod
P. 06
Broadcast tripod
P. 25
Broadcast tripod
P. 25
Broadcast tripod
P. 25
Broadcast tripod
P. 25
Broadcast tripod
P. 25
Broadcast tripod
P. 25
Broadcast head
P. 37
Broadcast head
P. 37
Broadcast head
P. 37
Broadcast plate
P. 41
Broadcast plate
P. 41
Broadcast plate
P. 41
Lens rail
P. 41
U-bolt
P. 46
Ball head
P. 32
Ball head
P. 32
Ball head
P. 32
Ball head
P. 32
Ball head
P. 32
Tripod
P. 17
Tripod
P. 17
Tripod
P. 13
Tripod
P. 13
Tripod
P. 13
Tripod
P. 13
Ball head
P. 33
Tripod
P. 23
RX centre column
P. 46
Leveling unit
P. 46
Tripod
P. 24
Tripod
P. 24
1/4“ adapter
P. 46
Tripod
P. 08
Tripod
P. 08
Tripod
P. 08
Tripod
P. 07
Tripod
P. 07
Tripod
P. 12
L bracket
P. 41
Release plate
P. 40
Release plate
P. 40
L bracket
P. 41
L bracket
P. 41
L bracket
P. 41
L bracket
P. 41
Release plate
P. 40
Release plate
P. 40
Release plate
P. 40
Release plate
P. 40
Release plate
P. 40
Release plate
P. 40
Release plate
P. 40
L bracket
P. 41
Release plate
P. 40
Release plate
P. 40
Release plate
P. 40
L bracket
P. 41
L bracket
P. 41
Release plate
P. 40
L bracket
P. 41
Release plate
P. 40
L bracket
P. 41
Release plate
P. 40
Release plate
P. 40
Release plate
P. 40
L bracket
P. 41
Video head
P. 36
Video head
P. 37
Video head
P. 37
Release platform P. 46
Tripod
P. 18
Tripod
P. 18
Tripod
P. 18
Tripod
P. 18
SIRUI warranty conditions
SIRUI Europe GmbH offers customers a 6 year warranty (2 years for bags and backpacks) from the date of purchase on manufacturing and material defects.
Damage caused by mechanical interference, excessive heat, improper use and loss is not covered by this warranty.
This warranty is only valid upon presentation of an appropriate warranty card and for purchases made within Europe. Your legal rights – including statutory rights –
are not affected.
2
YEARS
YEARS
WARRANTY
WARRANTY
Backpacks,
Bags
Tripods, Heads,
Accessories
Should you wish to invoke this warranty, please contact the Service Centre:
SIRUI Europe GmbH, c/o nobrainer GmbH, Venloer Str. 301-303, 50823 Köln, Germany, Phone: +49 221 94 99 54 - 100, info@sirui.de
SIRUI Impressum
SIRUI Europe GmbH, c/o nobrainer GmbH, Venloer Str. 301-303, 50823 Köln, Germany, Fon.: +49 221 94 99 54 - 100, info@sirui.de
Product/advertising photography: Jenny Tausendfreund • Layout: Helmut Fouquet
Photos provided courtesy of photographers available at:
Jens Brüggemann: P. 04, 09, 10, 11, 19, 29, 31 • Gürel Sahin: P. 15 • Jenny Tausendfreund: P. 38/39
Reprinting: © SIRUI Europe GmbH • Catalogue number: 770719 • Date: 02. August 2016
All company names, brand names and trademarks are the property of their respective owners and are used solely to identify and describe SIRUI products. All SIRUI trademarks, logos and photos in SIRUI catalogues,
websites, advertisements and other publications (print and digital) are the property of SIRUI. The use of SIRUI trademarks is only permitted with the express written permission of SIRUI.
Product directory / Warranty / Legal notice.
47
simply better.
Your SIRUI retailer:
www.sirui.co.uk
© 2016 SIRUI Europe GmbH
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising