Lenovo Laptop S110 User's Manual

Lenovo Laptop S110 User's Manual
Lenovo IdeaPad S110
Hardware
Maintenance
Manual
Note:
Before using this information and the product it supports, be sure to read the general information under
“Notices” on page 81.
First Edition (August 2011)
© Copyright Lenovo 2011.
LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant a General
Services Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set
forth in Contract No. GS-35F-05925.
© 2011 Lenovo
Contents
About this manual......................................... iv
Safety information.......................................... 1
General safety.................................................. 1
Electrical safety ................................................ 2
Safety inspection guide .................................... 3
Handling devices that are sensitive to
electrostatic discharge ..................................... 4
Grounding requirements .................................. 4
Safety notices: multilingual translations ........... 5
Laser compliance statement .......................... 11
Important service information .................... 14
Strategy for replacing FRUs........................... 14
Strategy for replacing a hard disk drive........ 15
Important notice for replacing a system
board ............................................................ 15
Important information about replacing RoHS
compliant FRUs.............................................. 15
General checkout ......................................... 17
What to do first ............................................... 17
Power system checkout ................................. 18
Checking the AC adapter ............................. 19
Checking operational charging..................... 19
Checking the battery pack............................ 19
Related service information ........................ 21
Restoring the factory contents by using
OneKey Recovery .......................................... 21
DIMM ............................................................38
Hard disk drive..............................................39
USB board ....................................................41
Thermal module............................................42
PCI Express Mini Card for wireless LAN ......43
RJ-45 connector ...........................................44
Power connector...........................................45
System board ...............................................46
Speakers ......................................................48
Touch pad bracket........................................49
LCD unit........................................................51
LCD front bezel.............................................53
LCD panel.....................................................54
Integrated camera ........................................55
Hinges ..........................................................56
Power button board ......................................57
Antenna kit....................................................58
Locations ........................................................59
Top view .......................................................59
Left-side view................................................60
Right-side view .............................................61
Front view .....................................................61
Bottom view ..................................................62
Parts list..........................................................63
Overall ..........................................................64
LCD FRUs ....................................................68
Keyboard ......................................................70
Miscellaneous parts......................................77
AC adapters..................................................78
Power cords..................................................78
Notices ..........................................................81
Trademarks ....................................................82
Restore of factory default ............................. 21
Using recovery discs .................................... 21
Passwords ..................................................... 22
Power-on password...................................... 22
Supervisor password.................................... 22
Power management ....................................... 22
Screen blank mode ...................................... 22
Sleep (standby) mode .................................. 22
Hibernation mode ......................................... 23
Lenovo IdeaPad S110 .................................. 24
Specifications ................................................. 24
Status indicators ............................................ 26
Fn key combinations ...................................... 28
FRU replacement notices............................... 29
Screw notices ............................................... 29
Removing and replacing an FRU ................... 30
Battery pack ................................................. 31
Keyboard ...................................................... 32
Base cover ................................................... 34
iii
About this manual
This manual contains service and reference information for the following Lenovo
IdeaPad product:
Lenovo IdeaPad S110
Use this manual to troubleshoot problems.
The manual is divided into the following sections:
• The common sections provide general information, guidelines, and safety
information required for servicing computers.
• The product-specific section includes service, reference, and product-specific
parts information.
Important:
This manual is intended only for trained servicers who are familiar with Lenovo
IdeaPad products. Use this manual to troubleshoot problems effectively.
Before servicing a Lenovo IdeaPad product, make sure to read all the information
under “Safety information” on page 1 and “Important service information” on
page 14.
iv
Lenovo IdeaPad S110 Hardware Maintenance Manual
Safety information
This chapter presents the following safety information that you need to get
familiar with before you service an Lenovo IdeaPad S110 computer:
• “General safety” on page 1
• “Electrical safety” on page 2
• “Safety inspection guide” on page 3
• “Handling devices that are sensitive to electrostatic discharge” on page 4
• “Grounding requirements” on page 4
• “Safety notices: multilingual translations” on page 5
• “Laser compliance statement” on page 11
General safety
Follow these rules below to ensure general safety:
• Observe a good housekeeping in the area where the machines are put during
and after the maintenance.
• When lifting any heavy object:
1. Make sure that you can stand safely without slipping.
2. Distribute the weight of the object equally between your feet.
3. Use a slow lifting force. Never move suddenly or twist when you attempt
to lift it.
4. Lift it by standing or pushing up with your leg muscles; this action could
avoid the strain from the muscles in your back. Do not attempt to lift any
object that weighs more than 16 kg (35 lb) or that you think is too heavy
for you.
• Do not perform any action that causes hazards to the customer, or that
makes the machine unsafe.
• Before you start the machine, make sure that other service representatives
and the customer are not in a hazardous position.
• Place removed covers and other parts in a safe place, keeping them away
from all personnel, while you are servicing the machine.
• Keep your toolcase away from walk areas so that other people will not trip it
over.
• Do not wear loose clothing that can be trapped in the moving parts of the
machine. Make sure that your sleeves are fastened or rolled up above your
elbows. If your hair is long, fasten it.
• Insert the ends of your necktie or scarf inside clothing or fasten it with the
nonconductive clip, about 8 centimeters (3 inches) from the end.
• Do not wear jewelry, chains, metal-frame eyeglasses, or metal fasteners for
your clothing.
Attention: Metal objects are good electrical conductors.
• Wear safety glasses when you are hammering, drilling, soldering, cutting
wire, attaching springs, using solvents, or working in any other conditions that
may be hazardous to your eyes.
• After service, reinstall all safety shields, guards, labels, and ground wires.
Replace any safety device that is worn or defective.
• Reinstall all covers correctly before returning the machine to the customer.
• Fan louvers on the machine help to prevent the overheating of internal components. Do not obstruct fan louvers or cover them with labels or stickers.
1
Lenovo IdeaPad S110 Hardware Maintenance Manual
Electrical safety
Observe the following rules when working on electrical equipments.
Important
Use only approved tools and test equipments. Some hand tools have handles
covered with a soft material that does not insulate you when working with live
electrical currents.
Many customers have rubber floor mats near their machines that contain small
conductive fibers to decrease electrostatic discharges. Do not use such kind of mat
to protect yourself from electrical shock.
• Find the room emergency power-off (EPO) switch, disconnecting the switch
or electrical outlet. If an electrical accident occurs, you can then operate the
switch or unplug the power cord quickly.
• Do not work alone under hazardous conditions or near the equipment that
has hazardous voltages.
• Disconnect all power before:
– Performing a mechanical inspection
– Working near power supplies
– Removing or installing main units
• Before you start to work on the machine, unplug the power cord. If you cannot
unplug it, ask the customer to power-off the wall box that supplies power to
the machine, and to lock the wall box in the off position.
• If you need to work on a machine that has exposed electrical circuits, observe
the following precautions:
– Ensure that another person, familiar with the power-off controls, is near
you.
Attention: Another person must be there to switch off the power, if
necessary.
– Use only one hand when working with powered-on electrical equipment;
keep the other hand in your pocket or behind your back.
Attention: An electrical shock can occur only when there is a complete
circuit. By observing the above rule, you may prevent a current from
passing through your body.
– When using testers, set the controls correctly and use the approved probe
leads and accessories for that tester.
– Stand on suitable rubber mats (obtained locally, if necessary) to insulate
you from grounds such as metal floor strips and machine frames.
Observe the special safety precautions when you work with very high voltages;
instructions for these precautions are in the safety sections of maintenance
information. Be extremely careful when you measure the high voltages.
• Regularly inspect and maintain your electrical hand tools for safe operational
condition.
• Do not use worn or broken tools and testers.
• Never assume that power has been disconnected from a circuit. First, check
it to make sure that it has been powered off.
• Always look carefully for possible hazards in your work area. Examples of
these hazards are moist floors, nongrounded power extension cables, power
surges, and missing safety grounds.
2
Lenovo IdeaPad S110 Hardware Maintenance Manual
• Do not touch live electrical circuits with the reflective surface of a plastic dental mirror. The surface is conductive; such touching can cause personal injury
and machine damage.
• Do not service the following parts with the power on when they are removed
from their normal operating places in a machine:
– Power supply units
– Pumps
– Blowers and fans
– Motor generators
and similar units. (This practice ensures correct grounding of the units.)
• If an electrical accident occurs:
– Caution: do not become a victim yourself.
– Switch off the power.
– Send the victim to get medical aid.
Safety inspection guide
The purpose of this inspection guide is to assist you in identifying potential
unsafe conditions. As each machine was designed and built, required safety
items were installed to protect users and service personnel from injury. This
guide addresses only those items. You should use good judgment to identify
potential safety hazards according to the attachment of non-Lenovo IdeaPad
features or options not covered by this inspection guide.
If any unsafe conditions are present, you must determine how serious the
apparent hazard could be and whether you can continue without first correcting
the problem.
Consider these conditions and the safety hazards they present:
• Electrical hazards, especially primary power (primary voltage on the frame
can cause serious or fatal electrical shock)
• Explosive hazards, such as a damaged CRT face or a bulging capacitor
• Mechanical hazards, such as loose or missing hardware
To determine whether there are any potential unsafe conditions, use the
following checklist at the beginning of every service task. Begin the checks with
the power off, and the power cord disconnected.
Checklist:
1. Check exterior covers for damage (loose, broken, or sharp edges).
2. Turn off the computer. Disconnect the power cord.
3. Check the power cord for:
a. A third-wire ground connector in good condition. Use a meter to measure
third-wire ground continuity for 0.1 ohm or less between the external
ground pin and the frame ground.
b. The power cord should be the type specified in the parts list.
c. Insulation must not be frayed or worn.
4. Check for cracked or bulging batteries.
5. Remove the cover.
6. Check for any obvious non-Lenovo IdeaPad alterations. Use good judgment
as to the safety of any non-Lenovo IdeaPad alterations.
3
Lenovo IdeaPad S110 Hardware Maintenance Manual
7. Check inside the unit for any obvious unsafe conditions, such as metal
filings, contamination, water or other liquids, or signs of fire or smoke
damage.
8. Check for worn, frayed, or pinched cables.
Handling devices that are sensitive to electrostatic
discharge
Any computer part containing transistors or integrated circuits (ICs) should be
considered sensitive to electrostatic discharge (ESD). ESD damage can occur
when there is a difference in charge between objects. Protect against ESD
damage by equalizing the charge so that the machine, the part, the work mat,
and the person handling the part are all at the same charge.
Notes:
1. Use product-specific ESD procedures when they exceed the requirements noted
here.
2. Make sure that the ESD protective devices you use have been certified (ISO
9000) as fully effective.
When handling ESD-sensitive parts:
• Keep the parts in protective packages until they are inserted into the product.
• Avoid contact with other people.
• Wear a grounded wrist strap against your skin to eliminate static on your
body.
• Prevent the part from touching your clothing. Most clothing is insulative and
retains a charge even when you are wearing a wrist strap.
• Use the black side of a grounded work mat to provide a static-free work surface. The mat is especially useful when handling ESD-sensitive devices.
• Select a grounding system, such as those listed below, to provide protection
that meets the specific service requirement.
Note:
The use of a grounding system to guard against ESD damage is desirable but not
necessary.
– Attach the ESD ground clip to any frame ground, ground braid, or greenwire ground.
– When working on a double-insulated or battery-operated system, use an
ESD common ground or reference point. You can use coax or connectoroutside shells on these systems.
– Use the round ground prong of the ac plug on ac-operated computers.
Grounding requirements
Electrical grounding of the computer is required for operator safety and correct
system function. Proper grounding of the electrical outlet can be verified by a
certified electrician.
4
Lenovo IdeaPad S110 Hardware Maintenance Manual
Safety notices: multilingual translations
The safety notices in this section are provided in English, French, German,
Hebrew, Italian, Japanese, and Spanish.
Safety notice 1
Before the computer is powered on after FRU replacement, make sure all screws,
springs, and other small parts are in place and are not left loose inside the computer.
Verify this by shaking the computer and listening for rattling sounds. Metallic parts
or metal flakes can cause electrical shorts.
Avant de remettre l’ordinateur sous tension après remplacement d’une unité en
clientèle, vérifiez que tous les ressorts, vis et autres pièces sont bien en place et bien
fixées. Pour ce faire, secouez l’unité et assurez-vous qu’aucun bruit suspect ne se
produit. Des pièces métalliques ou des copeaux de métal pourraient causer un courtcircuit.
Bevor nach einem FRU-Austausch der Computer wieder angeschlossen wird, muß
sichergestellt werden, daß keine Schrauben, Federn oder andere Kleinteile fehlen
oder im Gehäuse vergessen wurden. Der Computer muß geschüttelt und auf
Klappergeräusche geprüft werden. Metallteile oder-splitter können Kurzschlüsse
erzeugen.
Prima di accendere l’elaboratore dopo che é stata effettuata la sostituzione di una
FRU, accertarsi che tutte le viti, le molle e tutte le altri parti di piccole dimensioni
siano nella corretta posizione e non siano sparse all’interno dell’elaboratore.
Verificare ciò scuotendo l’elaboratore e prestando attenzione ad eventuali rumori;
eventuali parti o pezzetti metallici possono provocare cortocircuiti pericolosi.
Antes de encender el sistema despues de sustituir una FRU, compruebe que todos
los tornillos, muelles y demás piezas pequeñas se encuentran en su sitio y no se
encuentran sueltas dentro del sistema. Compruébelo agitando el sistema y
escuchando los posibles ruidos que provocarían. Las piezas metálicas pueden causar
cortocircuitos eléctricos.
5
Lenovo IdeaPad S110 Hardware Maintenance Manual
Safety notice 2
DANGER
Some standby batteries contain a small amount of nickel and cadmium. Do not
disassemble a standby battery, recharge it, throw it into fire or water, or shortcircuit
it. Dispose of the battery as required by local ordinances or regulations. Use only the
battery in the appropriate parts listing. Use of an incorrect battery can result in
ignition or explosion of the battery.
Certaines batteries de secours contiennent du nickel et du cadmium. Ne les
démontez pas, ne les rechargez pas, ne les exposez ni au feu ni à l’eau. Ne les mettez
pas en court-circuit. Pour les mettre au rebut, conformez-vous à la réglementation en
vigueur. Lorsque vous remplacez la pile de sauvegarde ou celle de l’horloge temps
réel, veillez à n’utiliser que les modèles cités dans la liste de pièces détachées
adéquate. Une batterie ou une pile inappropriée risque de prendre feu ou d’exploser.
Die Bereitschaftsbatterie, die sich unter dem Diskettenlaufwerk befindet, kann
geringe Mengen Nickel und Cadmium enthalten. Sie darf nicht zerlegt,
wiederaufgeladen, kurzgeschlossen, oder Feuer oder Wasser ausgesetzt werden. Bei
der Entsorgung die örtlichen Bestimmungen für Sondermüll beachten. Beim
Ersetzen der Bereitschafts-oder Systembatterie nur Batterien des Typs verwenden,
der in der Ersatzteilliste aufgeführt ist. Der Einsatz falscher Batterien kann zu
Entzündung oder Explosion führen.
Alcune batterie di riserva contengono una piccola quantità di nichel e cadmio. Non
smontarle, ricaricarle, gettarle nel fuoco o nell’acqua né cortocircuitarle. Smaltirle
secondo la normativa in vigore (DPR 915/82, successive disposizioni e disposizioni
locali). Quando si sostituisce la batteria dell’RTC (real time clock) o la batteria di
supporto, utilizzare soltanto i tipi inseriti nell’appropriato Catalogo parti. L’impiego
di una batteria non adatta potrebbe determinare l’incendio o l’esplosione della
batteria stessa.
Algunas baterías de reserva contienen una pequeña cantidad de níquel y cadmio. No
las desmonte, ni recargue, ni las eche al fuego o al agua ni las cortocircuite.
Deséchelas tal como dispone la normativa local. Utilice sólo baterías que se
encuentren en la lista de piezas. La utilización de una batería no apropiada puede
provocar la ignición o explosión de la misma.
6
Lenovo IdeaPad S110 Hardware Maintenance Manual
Safety notice 3
DANGER
The battery pack contains small amounts of nickel. Do not disassemble it, throw it
into fire or water, or short-circuit it. Dispose of the battery pack as required by local
ordinances or regulations. Use only the battery in the appropriate parts listing when
replacing the battery pack. Use of an incorrect battery can result in ignition or
explosion of the battery.
La batterie contient du nickel. Ne la démontez pas, ne l’exposez ni au feu ni à l’eau.
Ne la mettez pas en court-circuit. Pour la mettre au rebut, conformez-vous à la
réglementation en vigueur. Lorsque vous remplacez la batterie, veillez à n’utiliser
que les modèles cités dans la liste de pièces détachées adéquate. En effet, une
batterie inappropriée risque de prendre feu ou d’exploser.
Akkus enthalten geringe Mengen von Nickel. Sie dürfen nicht zerlegt,
wiederaufgeladen, kurzgeschlossen, oder Feuer oder Wasser ausgesetzt werden. Bei
der Entsorgung die örtlichen Bestimmungen für Sondermüll beachten. Beim
Ersetzen der Batterie nur Batterien des Typs verwenden, der in der Ersatzteilliste
aufgeführt ist. Der Einsatz falscher Batterien kann zu Entzündung oder Explosion
führen.
La batteria contiene piccole quantità di nichel. Non smontarla, gettarla nel fuoco o
nell’acqua né cortocircuitarla. Smaltirla secondo la normativa in vigore (DPR 915/
82, successive disposizioni e disposizioni locali). Quando si sostituisce la batteria,
utilizzare soltanto i tipi inseriti nell’appropriato Catalogo parti. L’impiego di una
batteria non adatta potrebbe determinare l’incendio o l’esplosione della batteria
stessa.
Las baterías contienen pequeñas cantidades de níquel. No las desmonte, ni recargue,
ni las eche al fuego o al agua ni las cortocircuite. Deséchelas tal como dispone la
normativa local. Utilice sólo baterías que se encuentren en la lista de piezas al
sustituir la batería. La utilización de una batería no apropiada puede provocar la
ignición o explosión de la misma.
7
Lenovo IdeaPad S110 Hardware Maintenance Manual
Safety notice 4
DANGER
The lithium battery can cause a fire, an explosion, or a severe burn. Do not recharge
it, remove its polarized connector, disassemble it, heat it above 100°C (212°F),
incinerate it, or expose its cell contents to water. Dispose of the battery as required
by local ordinances or regulations. Use only the battery in the appropriate parts
listing. Use of an incorrect battery can result in ignition or explosion of the battery.
La pile de sauvegarde contient du lithium. Elle présente des risques d’incendie,
d’explosion ou de brûlures graves. Ne la rechargez pas, ne retirez pas son
connecteur polarisé et ne la démontez pas. Ne l’exposez pas à une temperature
supérieure à 100°C, ne la faites pas brûler et n’en exposez pas le contenu à l’eau.
Mettez la pile au rebut conformément à la réglementation en vigueur. Une pile
inappropriée risque de prendre feu ou d’exploser.
Die Systembatterie ist eine Lithiumbatterie. Sie kann sich entzünden, explodieren
oder schwere Verbrennungen hervorrufen. Batterien dieses Typs dürfen nicht
aufgeladen, zerlegt, über 100 C erhitzt oder verbrannt werden. Auch darf ihr Inhalt
nicht mit Wasser in Verbindung gebracht oder der zur richtigen Polung angebrachte
Verbindungsstecker entfernt werden. Bei der Entsorgung die örtlichen
Bestimmungen für Sondermüll beachten. Beim Ersetzen der Batterie nur Batterien
des Typs verwenden, der in der Ersatzteilliste aufgeführt ist. Der Einsatz falscher
Batterien kann zu Entzündung oder Explosion führen.
La batteria di supporto e una batteria al litio e puo incendiarsi, esplodere o procurare
gravi ustioni. Evitare di ricaricarla, smontarne il connettore polarizzato, smontarla,
riscaldarla ad una temperatura superiore ai 100 gradi centigradi, incendiarla o
gettarla in acqua. Smaltirla secondo la normativa in vigore (DPR 915/82, successive
disposizioni e disposizioni locali). L’impiego di una batteria non adatta potrebbe
determinare l’incendio o l’esplosione della batteria stessa.
La batería de repuesto es una batería de litio y puede provocar incendios,
explosiones o quemaduras graves. No la recargue, ni quite el conector polarizado, ni
la desmonte, ni caliente por encima de los 100°C (212°F), ni la incinere ni exponga
el contenido de sus celdas al agua. Deséchela tal como dispone la normativa local.
8
Lenovo IdeaPad S110 Hardware Maintenance Manual
Safety notice 5
If the LCD breaks and the fluid from inside the LCD gets into your eyes or on your
hands, immediately wash the affected areas with water at least for 15 minutes. Seek
medical care if any symptoms caused by the fluid are present after washing.
Si le panneau d’affichage à cristaux liquides se brise et que vous recevez dans les
yeux ou sur les mains une partie du fluide, rincez-les abondamment pendant au
moins quinze minutes. Consultez un médecin si des symptômes persistent après le
lavage.
Die Leuchtstoffröhre im LCD-Bildschirm enthält Quecksilber. Bei der Entsorgung
die örtlichen Bestimmungen für Sondermüll beachten. Der LCD-Bildschirm besteht
aus Glas und kann zerbrechen, wenn er unsachgemäß behandelt wird oder der
Computer auf den Boden fällt. Wenn der Bildschirm beschädigt ist und die darin
befindliche Flüssigkeit in Kontakt mit Haut und Augen gerät, sollten die betroffenen
Stellen mindestens 15 Minuten mit Wasser abgespült und bei Beschwerden
anschließend ein Arzt aufgesucht werden.
Nel caso che caso l’LCD si dovesse rompere ed il liquido in esso contenuto entrasse
in contatto con gli occhi o le mani, lavare immediatamente le parti interessate con
acqua corrente per almeno 15 minuti; poi consultare un medico se i sintomi
dovessero permanere.
Si la LCD se rompe y el fluido de su interior entra en contacto con sus ojos o sus
manos, lave inmediatamente las áreas afectadas con agua durante 15 minutos como
mínimo. Obtenga atención medica si se presenta algún síntoma del fluido despues
de lavarse.
9
Lenovo IdeaPad S110 Hardware Maintenance Manual
Safety notice 6
DANGER
To avoid shock, do not remove the plastic cover that protects the lower part of the
inverter card.
Afin d’éviter tout risque de choc électrique, ne retirez pas le cache en plastique
protégeant la partie inférieure de la carte d’alimentation.
Aus Sicherheitsgründen die Kunststoffabdeckung, die den unteren Teil der
Spannungswandlerplatine umgibt, nicht entfernen..
Per evitare scosse elettriche, non rimuovere la copertura in plastica che avvolge la
parte inferiore della scheda invertitore.
Para evitar descargas, no quite la cubierta de plástico que rodea la parte baja de la
tarjeta invertida.
Safety notice 7
DANGER
Though the main batteries have low voltage, a shorted or grounded battery can
produce enough current to burn personnel or combustible materials.
Bien que le voltage des batteries principales soit peu élevé, le court-circuit ou la
mise à la masse d’une batterie peut produire suffisamment de courant pour brûler
des matériaux combustibles ou causer des brûlures corporelles graves.
Obwohl Hauptbatterien eine niedrige Spannung haben, können sie doch bei
Kurzschluß oder Erdung genug Strom abgeben, um brennbare Materialien zu
entzünden oder Verletzungen bei Personen hervorzurufen.
Sebbene le batterie di alimentazione siano a basso voltaggio, una batteria in corto
circuito o a massa può fornire corrente sufficiente da bruciare materiali combustibili
o provocare ustioni ai tecnici di manutenzione.
Aunque las baterías principales tienen un voltaje bajo, una batería cortocircuitada o
con contacto a tierra puede producir la corriente suficiente como para quemar
material combustible o provocar quemaduras en el personal.
10
Lenovo IdeaPad S110 Hardware Maintenance Manual
Safety notice 8
DANGER
Before removing any FRU, turn off the computer, unplug all power cords from
electrical outlets, remove the battery pack, and then disconnect any interconnecting
cables.
Avant de retirer une unité remplaçable en clientèle, mettez le système hors tension,
débranchez tous les cordons d’alimentation des socles de prise de courant, retirez la
batterie et déconnectez tous les cordons d’interface.
Die Stromzufuhr muß abgeschaltet, alle Stromkabel aus der Steckdose gezogen, der
Akku entfernt und alle Verbindungskabel abgenommen sein, bevor eine FRU
entfernt wird.
Prima di rimuovere qualsiasi FRU, spegnere il sistema, scollegare dalle prese
elettriche tutti i cavi di alimentazione, rimuovere la batteria e poi scollegare i cavi di
interconnessione.
Antes de quitar una FRU, apague el sistema, desenchufe todos los cables de las
tomas de corriente eléctrica, quite la batería y, a continuación, desconecte cualquier
cable de conexión entre dispositivos.
Laser compliance statement
Some models of Lenovo IdeaPad computer are equipped from the factory with
an optical storage device such as a CD-ROM drive or a DVD-ROM drive. Such
devices are also sold separately as options. If one of these drives is installed, it
is certified in the U.S. to conform to the requirements of the Department of
Health and Human Services 21 Code of Federal Regulations (DHHS 21 CFR)
Subchapter J for Class 1 laser products. Elsewhere, the drive is certified to
conform to the requirements of the International Electrotechnical Commission
(IEC) 825 and CENELEC EN 60 825 for Class 1 laser products.
If a CD-ROM drive, a DVD-ROM drive, or another laser device is installed, note
the following:
11
Lenovo IdeaPad S110 Hardware Maintenance Manual
CAUTION
Use of controls or adjustments or performance of procedures other than those
specified herein might result in hazardous radiation exposure.
O uso de controles, ajustes ou desempenho de procedimentos diferentes daqueles
aqui especificados pode resultar em perigosa exposição à radiação.
Pour éviter tout risque d’exposition au rayon laser, respectez les consignes de
réglage et d’utilisation des commandes, ainsi que les procédures décrites.
Werden Steuer- und Einstellelemente anders als hier festgesetzt verwendet, kann
gefährliche Laserstrahlung auftreten.
L’utilizzo di controlli, regolazioni o l’esecuzione di procedure diverse da quelle
specificate possono provocare l’esposizione a.
El uso de controles o ajustes o la ejecución de procedimientos distintos de los aquí
especificados puede provocar la exposición a radiaciones peligrosas.
Opening the CD-ROM drive, the DVD-ROM drive, or any other optical storage
device could result in exposure to hazardous laser radiation. There are no
serviceable parts inside those drives. Do not open.
A CD-ROM drive, a DVD-ROM drive, or any other storage device installed may
contain an embedded Class 3A or Class 3B laser diode. Note the following:
12
Lenovo IdeaPad S110 Hardware Maintenance Manual
DANGER
Emits visible and invisible laser radiation when open. Do not stare into the beam, do
not view directly with optical instruments, and avoid direct exposure to the beam.
Radiação por raio laser ao abrir. Não olhe fixo no feixe de luz, não olhe diretamente
por meio de instrumentos óticos e evite exposição direta com o feixe de luz..
Rayonnement laser si carter ouvert. Évitez de fixer le faisceau, de le regarder
directement avec des instruments optiques, ou de vous exposer au rayon.
Laserstrahlung bei geöffnetem Gerät. Nicht direkt oder über optische Instrumente in
den Laserstrahl sehen und den Strahlungsbereich meiden.
Kinyitáskor lézersugár ! Ne nézzen bele se szabad szemmel, se optikai eszközökkel.
Kerülje a sugárnyalábbal való érintkezést!
Aprendo l’unità vengono emesse radiazioni laser. Non fissare il fascio, non
guardarlo direttamente con strumenti ottici e evitare l’esposizione diretta al fascio.
Radiación láser al abrir. No mire fijamente ni examine con instrumental óptico el
haz de luz. Evite la exposición directa al haz.
13
Lenovo IdeaPad S110 Hardware Maintenance Manual
Important service information
This chapter presents the following important service information:
• “Strategy for replacing FRUs” on page 14
– “Strategy for replacing a hard disk drive” on page 15
– “Important notice for replacing a system board” on page 15
• “Important information about replacing RoHS compliant FRUs” on page 15
Important:
BIOS and device driver fixes are customer-installable. The BIOS and device drivers
are posted on the customer support site:
http://consumersupport.lenovo.com/.
Strategy for replacing FRUs
Before replacing parts:
Make sure that all software fixes, drivers, and BIOS downloads are installed
before replacing any FRUs listed in this manual.
After a system board is replaced, ensure that the latest BIOS is loaded to the
system board before completing the service action.
To download software fixes, drivers, and BIOS, follow the steps below:
1. Go to http://consumersupport.lenovo.com/.
2. Enter a serial number or select a product or use Lenovo smart downloading.
3. Select the BIOS/Driver/Applications and download.
4. Follow the directions on the screen and install the necessary software.
Use the following strategy to prevent unnecessary expense for replacing and
servicing FRUs:
• If you are instructed to replace an FRU, but the replacement does not solve
the problem, reinstall the original FRU before you continue.
• Some computers have both a processor board and a system board. If you are
instructed to replace either of them, and replacing one of them does not solve
the problem, reinstall that board, and then replace the other one.
• If an adapter or a device consists of more than one FRU, any of the FRUs
may be the cause of the error. Before replacing the adapter or device, remove
the FRUs one by one to see if the symptoms change. Replace only the FRU
that changed the symptoms.
Attention: The setup configuration on the computer you are servicing may have
been customized. Running Automatic Configuration may alter the settings. Note
the current configuration settings (using the View Configuration option); then,
when service has been completed, verify that those settings remain in effect.
14
Lenovo IdeaPad S110 Hardware Maintenance Manual
Strategy for replacing a hard disk drive
Always try to run a low-level format before replacing a hard disk drive. This will
cause all customer data on the hard disk to be lost. Make sure that the customer
has a current backup of the data before performing this action.
Attention: The drive startup sequence in the computer you are servicing may
have been changed. Be extremely careful during write operations such as
copying, saving, or formatting. If you select an incorrect drive, data or programs
can be overwritten.
Important notice for replacing a system board
Some components mounted on a system board are very sensitive. Improper
handling can cause damage to those components, and may cause a system
malfunction.
Attention: When handling a system board:
• Do not drop the system board or apply any excessive force to it.
• Avoid rough handling of any kind.
• Avoid bending the system board and hard pushing to prevent cracking at
each BGA (Ball Grid Array) chipset.
Important information about replacing RoHS
compliant FRUs
RoHS, The Restriction of Hazardous Substances in Electrical and
Electronic Equipment Directive (2002/95/EC) is a European Union legal
requirement affecting the global electronics industry. RoHS requirements
must be implemented on Lenovo products placed on the market after June
2006. Products on the market before June 2006 are not required to have
RoHS compliant parts. If the original FRU parts are non-compliant,
replacement parts can also be non-compliant. In all cases if the original
FRU parts are RoHS compliant, the replacement part must also be RoHS
compliant.
Note: RoHS and non-RoHS FRU part numbers with the same fit and function
are identified with unique FRU part numbers.
Lenovo plans to transit to RoHS compliance well before the implementation
date and expects its suppliers to be ready to support Lenovo’s requirements and
schedule in the EU. Products sold in 2005 and 2006 will contain some RoHS
compliant FRUs. The following statement pertains to these products and any
product Lenovo produces containing RoHS compliant FRUs.
RoHS compliant FRUs have unique FRU part numbers. Before or after the
RoHS implementation date, failed RoHS compliant parts must always be
replaced with RoHS compliant ones, so only the FRUs identified as compliant in
the system HMM or direct substitutions for those FRUs may be used.
15
Lenovo IdeaPad S110 Hardware Maintenance Manual
Products marketed before June 2006
Products marketed after June 2006
Current or
original part
Replacement FRU
Current or
original part
Replacement
FRU
Non-RoHS
Can be Non-RoHS
Non-RoHS
Can be RoHS
Must be RoHS
Must be RoHS
Non-RoHS
Can sub to RoHS
RoHS
Must be RoHS
Note: A direct substitution is a part with a different FRU part number that is
automatically shipped by the distribution center at the time of the order.
16
Lenovo IdeaPad S110 Hardware Maintenance Manual
General checkout
This chapter presents the following information:
• “What to do first” on page 17
• “Power system checkout” on page 18
Before you go to the checkout, make sure to read the following important notes:
Notes:
• Only certified trained personnel can service the computer.
• Before replacing any FRU, read the entire page on removing and replacing
FRUs.
• When you replace FRUs, use new nylon-coated screws.
• Be extremely careful during such write operations as copying, saving, or
formatting. Drives in the computer that you are servicing sequence might have
been altered. If you select an incorrect drive, data or programs might be
overwritten.
• Replace an FRU only with another FRU of the correct model. When you replace
an FRU, make sure that the machine model and the FRU part number are correct
by referring to the FRU parts list.
• An FRU should not be replaced just because of a single, unreproducible failure.
Single failures can occur for a variety of reasons that have nothing to do with a
hardware defect, such as cosmic radiation, electrostatic discharge, or software
errors. Consider replacing an FRU only when a problem recurs. If you suspect
that an FRU is defective, clear the error logs and run the test again. If the error
does not recur, do not replace the FRU.
• Be careful not to replace a nondefective FRU.
What to do first
When you do return an FRU, you must include the following information in the
parts exchange form or parts return form that you attach to it:
1. Name and phone number of servicer
2. Date of service
3. Date on which the machine failed
4. Date of purchase
5. Procedure index and page number in which the failing FRU was detected
6. Failing FRU name and part number
7. Machine type, model number, and serial number
8. Customer’s name and address
Note for warranty: During the warranty period, the customer may be
responsible for repair costs if the computer damage was caused by misuse,
accident, modification, unsuitable physical or operating environment, or
improper maintenance by the customer.
17
Lenovo IdeaPad S110 Hardware Maintenance Manual
The following is a list of some common items that are not covered under
warranty and some symptoms that might indicate that the system was subjected
to stress beyond normal use.
Before checking problems with the computer, determine whether the damage is
covered under the warranty by referring to the following list:
The following are not covered under warranty:
• LCD panel cracked from the application of excessive force or from being
dropped
• Scratched (cosmetic) parts
• Distortion, deformation, or discoloration of the cosmetic parts
• Plastic parts, latches, pins, or connectors that have been cracked or broken
by excessive force
• Damage caused by liquid spilled into the system
• Damage caused by the improper insertion of a PC Card or the installation of
an incompatible card
• Improper disc insertion or use of an optical drive
• Diskette drive damage caused by pressure on the diskette drive cover, foreign material in the drive, or the insertion of a diskette with multiple labels
• Damaged or bent diskette eject button
• Fuses blown by attachment of a nonsupported device
• Forgotten computer password (making the computer unusable)
• Sticky keys caused by spilling a liquid onto the keyboard
• Use of an incorrect AC adapter on laptop products
The following symptoms might indicate damage caused by nonwarranted
activities:
• Missing parts might be a symptom of unauthorized service or modification.
• If the spindle of a hard disk drive becomes noisy, it may have been subjected
to excessive force, or dropped.
Power system checkout
To verify a symptom, follow the steps below:
1. Turn off the computer.
2. Remove the battery pack.
3. Connect the AC adapter.
4. Make sure that power is supplied when you turn on the computer.
5. Turn off the computer.
6. Disconnect the AC adapter and install the charged battery pack.
7. Make sure that the battery pack supplies power when you turn on the
computer.
If you suspect a power problem, see the appropriate one of the following power
supply checkouts:
• “Checking the AC adapter” on page 19
• “Checking operational charging” on page 19
• “Checking the battery pack” on page 19
18
Lenovo IdeaPad S110 Hardware Maintenance Manual
Checking the AC adapter
You are here because the computer fails only when the AC adapter is used.
• If the power-on indicator does not turn on, check the power cord of the AC
adapter for correct continuity and installation.
• If the computer does not charge during operation, go to “Checking operational charging”.
To check the AC adapter, follow the steps below:
1. Unplug the AC adapter cable from the computer.
2. Measure the output voltage at the plug of the AC adapter cable. See the
following figure:
Pin
Voltage (V DC)
1
+20
2
0
2
1
Note: Output voltage for the AC adapter pin No. 2 may differ from the one you
are servicing.
3. If the voltage is not correct, replace the AC adapter.
4. If the voltage is acceptable, do the following:
• Replace the system board.
• If the problem continues, go to “Lenovo IdeaPad S110” on page 24.
Note: Noise from the AC adapter does not always indicate a defect.
Checking operational charging
To check whether the battery charges properly during operation, use a
discharged battery pack or a battery pack that has less than 50% of the total
power remaining when installed in the computer.
Perform operational charging. If the battery status indicator or icon does not light
on, remove the battery pack and let it return to room temperature. Reinstall the
battery pack. If the charge indicator or icon is still off, replace the battery pack.
If the charge indicator still does not light on, replace the system board. Then
reinstall the battery pack. If it is still not charged, go to the next section.
Checking the battery pack
Battery charging does not start until the Power Meter shows that less than 95%
of the total power remains; under this condition the battery pack can charge to
100% of its capacity. This protects the battery pack from being overcharged or
from having a shortened life.
To check your battery, move your cursor to the Power Meter icon in the icon tray
of the Windows® taskbar and wait for a moment (but do not click it), and the
19
Lenovo IdeaPad S110 Hardware Maintenance Manual
percentage of battery power remaining is displayed. To get detailed information
about the battery, double-click the Power Meter icon.
Note: If the battery pack becomes hot, it may not be able to be charged.
Remove it from the computer and leave it at room temperature for a while. After
it cools down, reinstall and recharge it.
To check the battery pack, follow the steps below:
1. Turn off the computer.
2. Remove the battery pack and measure the voltage between battery
terminals 1 (+) and 7 (-). See the following figure:
1(+)
2(+)
5
3 4
6(-)
7(-)
Terminal
Voltage (V DC)
1
+0 to +14
7
Ground (-)
3. If the voltage is less than +11.0 V DC, the battery pack has been discharged.
Note: Recharging will be continued for at least 3 hours, even though the
indicator does not light on.
If the voltage is still less than +11.0 V DC after recharging, replace the
battery.
4. If the voltage is more than +11.0 V DC, measure the resistance between
battery terminals 5 and 7. The resistance must be 4 to 30 KΩ.
If the resistance is not correct, replace the battery pack. If the resistance is
correct, replace the system board.
20
Lenovo IdeaPad S110 Hardware Maintenance Manual
Related service information
This chapter presents the following information:
• “Restoring the factory contents by using OneKey Recovery” on page 21
• “Passwords” on page 22
• “Power management” on page 22
Restoring the factory contents by using OneKey
Recovery
Restore of factory default
The Lenovo IdeaPad S110 computers come with pre-installed OneKey Rescue
System. In order to save application files and the initial backed up files of the
system, the hard disk in a Lenovo computer includes a hidden partition when it
is shipped. If you need to restore the system to the point of your first boot up,
just enter Lenovo OneKey Rescue System and run Restore to factory default.
For details of OneKey Rescue System, see the User Guide for OneKey Rescue
System.
Note:
This will delete all the new data on the system partition (C drive), which is not
recoverable. Make sure to back up your critical data before you perform this action.
Using recovery discs
When you replace a hard disk drive in your computer, you are unable to use the
pre-installed Lenovo OneKey Recovery and OneKey Rescue. However, you can
use the recovery discs that store your backed up data to restore your new hard
drive to a previous backup status.
Note:
You can create recovery discs by burning the backup image to a CD/DVD as
recovery discs. For details of Create recovery discs, see the User Guide for
OneKey Rescue System.
When you use the recovery discs to boot your computer, the system will enter
the user interface for system recovery automatically. Please follow the prompt to
insert the backup discs to complete the whole recovery process.
Note:
The recovery process might take up to 2 hours.
21
Lenovo IdeaPad S110 Hardware Maintenance Manual
Passwords
As many as two passwords may be needed for any Lenovo IdeaPad computer:
the power-on password (POP) and the supervisor password (SVP).
If any of these passwords has been set, a prompt for it appears on the screen
whenever the computer is turned on. The computer does not start until the
password is entered.
Exception: If only an SVP is installed, the password prompt does not appear
when the operating system is booted.
Power-on password
A power-on password (POP) protects the system from being powered on by an
unauthorized person. The password must be entered before an operating
system can be booted.
Supervisor password
A supervisor password (SVP) protects the system information stored in the
BIOS Setup Utility. The user must enter the SVP in order to get access to the
BIOS Setup Utility and change the system configuration.
Attention: If the SVP has been forgotten and cannot be made available to the
servicer, there is no service procedure to reset the password. The system board
must be replaced for a scheduled fee.
Power management
Note: Power management modes are not supported for APM operating system.
To reduce power consumption, the computer has three power management
modes: screen blank, sleep (standby), and hibernation.
Screen blank mode
If the time set on the “Turn off monitor” timer in the operating system expires, the
LCD backlight turns off. You can also turn off the LCD backlight by pressing
Fn+F2.
To end screen blank mode and resume normal operation, press any key.
Sleep (standby) mode
When the computer enters sleep (standby) mode, the following events occur in
addition to what occurs in screen blank mode:
• The LCD is powered off.
• The hard disk drive is powered off.
• The CPU stops.
To enter sleep (standby) mode, press Fn+F1.
In certain circumstances, the computer goes into sleep (standby) mode
automatically:
22
Lenovo IdeaPad S110 Hardware Maintenance Manual
• If a “suspend time” has been set on the timer, and the user does not do any
operation with the keyboard, the hard disk, the parallel connector, or the diskette drive within that time.
• If the battery indicator is amber, indicating that the battery power is low. (Alternatively, if Hibernate when battery becomes low has been selected in the
“Power Management Properties” window, the computer goes into hibernation
mode.)
To cause the computer to return from sleep (standby) mode and resume the
operation, do one of the following:
• Press the Fn key.
• Open the lid.
• Turn on the power switch.
Also, in the following event, the computer automatically returns from sleep
(standby) mode and resumes the operation:
• The time set on the resume timer elapses.
Note: The computer does not accept any input immediately after it enters sleep
(standby) mode. Wait a few seconds before taking any action to reenter
operation mode.
Hibernation mode
In hibernation mode, the following occurs:
• The system status, RAM, VRAM, and setup data are stored on the hard disk.
• The system is powered off.
To cause the computer to enter hibernation mode, follow the steps below:
• If you are using the ACPI operating system and have defined one of the following actions as the event that causes the system to go into hibernation
mode, perform that action:
– Closing the lid.
– Pressing the power button.
Also, the computer goes into hibernation mode automatically in either of the
following conditions:
• If a “hibernation time” has been set on the timer, and if the user does not do
any operation with the keyboard, the hard disk drive, the parallel connector,
or the diskette drive within that time.
• If the timer conditions are satisfied in suspend mode.
When the power is turned on, the computer returns from hibernation mode and
resumes operation. The hibernation file in the boot record on the hard disk drive
is read, and system status is restored from the hard disk drive.
23
Lenovo IdeaPad S110 Hardware Maintenance Manual
Lenovo IdeaPad S110
This chapter presents the following product-specific service references and
product-specific parts information:
• “Specifications” on page 24
• “Status indicators” on page 26
• “Fn key combinations” on page 28
• “FRU replacement notices” on page 29
• “Removing and replacing an FRU” on page 30
• “Locations” on page 59
• “Parts list” on page 63
Specifications
The following table lists the specifications of the Lenovo IdeaPad S110:
Table 1.Specifications
Feature
Description
Processor
• Intel® Atom™ N455 (1.66 GHz)
• Intel® Atom™ N570 (1.66 GHz, Dual Core)
• Intel® Atom™ N435 (1.33 GHz)
South Bridge
Chipset
24
Intel NM10 Express
Bus
architecture
•
•
•
•
667 MHz FSB
PCI
PCI Express
DMI
Graphics
Intel integrated graphics
Display
10.1-inch, flat type LED backlight, 1024 x 600 pixels
Memory
• DDR3-800/1066MHz, 1GB or 2GB
• One memory slot, 2GB maximum capacity
CMOS RAM
256 Bytes
Hard disk drive
• 250GB, 5400rpm (2.5-inch, 7mm or 9.5mm, SATA II)
• 320GB, 5400rpm (2.5-inch, 7mm or 9.5mm, SATA II)
• 500GB, 5400rpm (2.5-inch, 9.5mm, SATA II)
I/O port
•
•
•
•
•
USB2.0 x 3 or USB2.0 x 2 + USB3.0 x 1
VGA port X 1
RJ-45 port X 1
Combo audio port X 1
2-in-1 (SD, MMC) memory slot
Lenovo IdeaPad S110 Hardware Maintenance Manual
Table 1.Specifications (Continued)
Feature
Description
Integrated
audio
• Built-in stereo microphone
• Built-in speakers
Ethernet chip
Realtek RTL8105E-GR, 10/100 Mbps
WLAN/WiMAX
card
•
•
•
•
Intel 622ANXHMW
Intel 612BNxHMW
Atheros AR5B95
Realtek RTL8188CE
WLAN/
Bluetooth
combo card
• Atheros AR5B195
• Realtek RTL8188CEBT
Integrated
camera
Fixed-focus CMOS, 0.3 or 2.0 Mega pixels
Battery
Lithium-ion, 2200mAH (3-cell) or 4400mAH (6-cell)
AC adapter
• Input 100 - 240V, 50 - 60Hz AC
• 3-pin, 30W or 40W
• Output 19V DC
Preloaded
operating
system
•
•
•
•
Windows 7 Starter
Windows 7 Home Basic
MeeGo
Free DOS
25
Lenovo IdeaPad S110 Hardware Maintenance Manual
Status indicators
The system status indicators below show the computer status:
Table 2.Status indicators
No.
Symbol
Indicator
Indicator
Meaning
status
Power
26
On (solid
white)
The computer is powered on.
Blinking
Blinking The computer is in
sleep mode.
Off
The computer is powered off.
Lenovo IdeaPad S110 Hardware Maintenance Manual
Table 2.Status indicators (Continued)
No.
Symbol
Indicator
Indicator
Meaning
status
Battery
On (solid
white)
The battery has more than
20% charge.
Solid
amber
The battery has between 5%
and 20% charge.
Fast
blinking
amber
The battery has less than 5%
charge.
Slow
blinking
amber
The battery is being charged.
When battery charge reaches
20%, the blinking color
changes to white.
Slow
blinking
white
The battery has between 20%
and 80% charge and is still
charging. When the battery
reaches 80% charge the light
will stop blinking, but charging
will continue until the battery
is fully charged.
Off
The battery is detached.
Device
access
Blinking
Data is being read from or
written to the hard disk drive
or other external storage
devices.
Wireless
On
Wireless (Bluetooth or
wireless network card) is
enabled.
Off
Wireless is disabled.
27
Lenovo IdeaPad S110 Hardware Maintenance Manual
Fn key combinations
The following table shows the function of each combination of Fn with a function
key.
Table 3.Fn key combinations
28
Fn + Esc:
Turn on/off the integrated camera.
Fn + F1:
Enter sleep mode.
Fn + F2:
Turn on/off the backlight of the LCD screen.
Fn + F3:
Open the interface for the display device switch to select this
notebook or an external display.
Fn + F5:
Open the interface for integrated wireless devices settings
(On/Off).
Fn + F6:
Enable/Disable the touchpad.
Fn + F7:
Start/Pause playback of Windows Media Player.
Fn + F8:
Stop playback of Windows Media Player.
Fn + F9:
Skip to the previous track.
Fn + F10:
Skip to the next track.
Fn + F11:
F12 key
Fn + PrtSc:
Activate the system request.
Fn + Pause:
Activate the break function.
Fn + Delete:
Enable/Disable the scroll lock.
Fn + PgUp
Home key
Fn + PgDn
End key
Fn + ↑ / ↓
Increase/Decrease display brightness.
Fn + → / ←
Increase/Decrease sound volume.
Lenovo IdeaPad S110 Hardware Maintenance Manual
FRU replacement notices
This section presents notices related to removing and replacing parts. Read this
section carefully before replacing any FRU.
Screw notices
Loose screws can cause a reliability problem. In the Lenovo IdeaPad computer,
this problem is addressed with special nylon-coated screws that have the
following characteristics:
• They maintain tight connections.
• They do not easily come loose, even with shock or vibration.
• They are harder to tighten.
• Each one should be used only once.
Do the following when you service this machine:
• Keep the screw kit in your tool bag.
• Always use new screws.
• Use a torque screwdriver if you have one.
Tighten screws as follows:
• Plastic to plastic
Turn an additional 90° after the screw head touches the surface of the plastic
part:
more than 90°
(Cross-section)
• Logic card to plastic
Turn an additional 180° after the screw head touches the surface of the logic
card:
more than 180°
(Cross-section)
• Torque driver
If you have a torque screwdriver , refer to the “Torque” column for each step.
• Make sure that you use the correct screws. If you have a torque screwdriver,
tighten all screws firmly to the torque shown in the table. Never use a screw
that you removed. Use a new one. Make sure that all screws are tightened firmly.
• Ensure torque screwdrivers are calibrated correctly following country specifications.
29
Lenovo IdeaPad S110 Hardware Maintenance Manual
Removing and replacing an FRU
This section presents exploded figures with instructions indicating how to
remove and replace an FRU. Make sure to observe the following general rules:
1. Do not attempt to service any computer unless you have been trained and
certified. An untrained person may damage parts.
2. Before replacing any FRU, review the “FRU replacement notices” on
page 29.
3. Start by removing any FRUs that must be removed to access the failing
FRU. Any such FRUs are listed at the top of the page. Remove them in the
order in which they are listed.
4. Follow the correct sequence of steps to remove the FRU, as given in the
numbers in square boxes by the illustrations.
5. When turning a screw to replace an FRU, turn it in the direction indicated by
the arrow in the illustration.
6. When removing an FRU, move it in the direction indicated by the arrow in
the figure.
7. To put the new FRU in place carry out the removal procedure in reverse and
pay attention to any notes pertaining to replacing the parts. For information
about connecting and arranging internal cables, see “Locations” on page 59.
8. When replacing an FRU, use the correct screw as shown in the procedures.
DANGER
Before removing any FRU, turn off the computer, unplug all power cords from
electrical outlets, remove the battery pack, and then disconnect any of the
interconnecting cables.
Attention 1: After replacing an FRU, do not turn on the computer until you have
made sure that all screws, springs, and other small parts are in place and none
are loose inside the computer. Verify this by shaking the computer gently and
listening for rattling sounds. Metallic parts or metal flakes can cause electrical
short circuits.
Attention 2: The system board is sensitive to, and can be damaged by,
electrostatic discharge. Before touching it, establish personal grounding by
touching a ground point with one hand or using an electrostatic discharge (ESD)
strap (P/N 6405959) to remove the risk of electrostatic shock.
30
Lenovo IdeaPad S110 Hardware Maintenance Manual
Battery pack
Figure 1: Removal steps of Battery pack
Unlock the battery release slider on the left as shown in
release slider on the right lever in the unlocked position
pack in the direction shown by arrow .
. Hold the battery
. Remove the battery
When installing: Install the battery pack using the slide rails of the slot. Then
make sure that the battery release sliders are set to the locked position.
31
Lenovo IdeaPad S110 Hardware Maintenance Manual
Keyboard
For access, remove this FRU:
• “Battery pack” on page 31
Figure 2: Removal steps of keyboard
1
1
1
Step
Screw (quantity)
Color
Torque
M2.0 × 1.7 mm, flat-head,
nylon-coated (3)
Black
1.0 kgfcm
Remove the three screws
32
.
Lenovo IdeaPad S110 Hardware Maintenance Manual
Figure 3: Removal steps of keyboard (continued)
2
3
4
Lift the keyboard . Unlock the PFC connector
connector in the direction shown by arrow .
and then detach the
When installing: Make sure that the FPC connector is attached firmly and then
lock the FPC connector.
33
Lenovo IdeaPad S110 Hardware Maintenance Manual
Base cover
For access, remove these FRUs in order:
• “Battery pack” on page 31
• “Keyboard” on page 32
Figure 4: Removal steps of base cover
1
1
1
1
1
1
1
Step
Screw (quantity)
Color
Torque
M2.0 × 6.0 mm, flat round-head,
nylon-coated (7)
Black
1.85 kgfcm
Remove the eight screws
34
.
Lenovo IdeaPad S110 Hardware Maintenance Manual
Figure 5: Removal steps of base cover (continued)
1
1
1
1
1
1
Step
Screw (quantity)
Color
Torque
M2.0 × 6.0 mm, flat round-head,
nylon-coated (6)
Black
1.85 kgfcm
Remove the six screws
.
35
Lenovo IdeaPad S110 Hardware Maintenance Manual
Figure 6: Removal steps of base cover (continued)
Lift the base cover as shown by the arrow.
36
Lenovo IdeaPad S110 Hardware Maintenance Manual
Note: Applying labels to the base cover
The new base cover FRU is shipped with a kit containing several kinds of labels.
When you replace the base cover, you need to apply the following labels:
The following labels need to be peeled off from the old base cover and put on the
new base cover.
Windows license label (COA)
Chinese service information label
Homologation label (US/CA/Taiwan)
Israel label
Rating label
Refer to the illustration below for the location of each label.
For some models, you also need to apply one or two FCC labels. Check the old base
cover; if it has one or two FCC labels, find duplicates of them in the label kit and
apply them to the new base cover.
a
e
b
c
d
37
Lenovo IdeaPad S110 Hardware Maintenance Manual
DIMM
For access, remove these FRUs in order:
• “Battery pack” on page 31
• “Keyboard” on page 32
• “Base cover” on page 34
Figure 7: Procedure to remove the DIMM
2
1
1
Release the latches on both edges of the socket at the same time in the
direction shown by arrows , and then unplug the DIMM in the direction shown
by arrow .
38
Lenovo IdeaPad S110 Hardware Maintenance Manual
Hard disk drive
For access, remove these FRUs in order:
• “Battery pack” on page 31
• “Keyboard” on page 32
• “Base cover” on page 34
Attention:
• Do not drop the hard disk drive or apply any physical shock to it. The hard disk
drive is sensitive to physical shock. Improper handling can cause damage and
permanent loss of data.
• Before removing the drive, suggest to the customer that they should back up all
the information on it if possible.
• Never remove the drive while the system is operating or is in suspend mode.
Figure 8: Removal steps of hard disk drive
1
1
2
Step
Screws (quantity)
Color
Torque
M3.0 × 3.0 mm, flat round-head,
nylon-coated (2)
Black
2.85 kgfcm
Remove the two screws . Hold the HDD connector with one hand and pull
then lift the hard drive disk in the direction shown by arrow .
When installing: Make sure that the HDD connector is attached firmly.
39
Lenovo IdeaPad S110 Hardware Maintenance Manual
Figure 9: Removal steps of hard disk drive (continued)
1
2
1
Step
Screw (quantity)
Color
Torque
M3.0 × 3.0 mm, flat round-head,
nylon-coated (2)
Black
2.85 kgfcm
Remove the two side screws
bracket
.
40
and then detach the hard disk drive from its
Lenovo IdeaPad S110 Hardware Maintenance Manual
USB board
For access, remove these FRUs in order:
• “Battery pack” on page 31
• “Keyboard” on page 32
• “Base cover” on page 34
Figure 10: Removal steps of USB port
1
3
Step
Screw (quantity)
Color
Torque
M2.0 × 3.0 mm, flat round-head,
nylon-coated (1)
Black
1.35 kgfcm
Remove one screw . Unlock the USB connector
and then detach the
connector in the direction shown by arrow . Remove USB port.
41
Lenovo IdeaPad S110 Hardware Maintenance Manual
Thermal module
For access, remove these FRUs in order:
• “Battery pack” on page 31
• “Keyboard” on page 32
• “Base cover” on page 34
Figure 11: Removal steps of thermal module
1
1
2
Step
1
1
3
Screw (quantity)
Color
Torque
M2.0 × 3.0 mm, flat round-head,
nylon-coated (4)
Black
1.35 kgfcm
Remove the four screws . Detach the connector in the direction shown by
arrow . Lift and remove the thermal module in the direction shown by
arrow .
When installing: Make sure that the thermal module connector is attached
firmly to the system board.
42
Lenovo IdeaPad S110 Hardware Maintenance Manual
PCI Express Mini Card for wireless LAN
For access, remove these FRUs in order:
• “Battery pack” on page 31
• “Keyboard” on page 32
• “Base cover” on page 34
Figure 12: Removal steps of PCI Express Mini Card for wireless LAN
2
1
3
Step
Screw (quantity)
Color
Torque
M2.0 × 6.0 mm, flat round-head,
nylon-coated (1)
Black
1.85 kgfcm
Remove one screw . Unplug the two cables . Then remove the PCI
Express Mini Card in the direction shown by the arrow .
43
Lenovo IdeaPad S110 Hardware Maintenance Manual
RJ-45 connector
For access, remove these FRUs in order:
• “Battery pack” on page 31
• “Keyboard” on page 32
• “Base cover” on page 34
Figure 13: Removal steps of RJ-45 connector
2
1
Detach the connector in the direction shown by arrow
connector as shown by arrow .
. Lift the RJ-45
When installing: Make sure that the connector is attached firmly.
44
Lenovo IdeaPad S110 Hardware Maintenance Manual
Power connector
For access, remove these FRUs in order:
• “Battery pack” on page 31
• “Keyboard” on page 32
• “Base cover” on page 34
Figure 14: Removal steps of power connector
1
2
Detach the connector in the direction shown by arrow
connector in the direction shown by arrow .
. Lift the power
When installing: Make sure that the connector is attached firmly.
45
Lenovo IdeaPad S110 Hardware Maintenance Manual
System board
Important notices for handling the system board
When handling the system board, bear the following in mind:
• Be careful not to drop the system board on a bench top that has a hard surface,
such as metal, wood, or composite.
• Avoid rough handling of any kind.
• Take care not to drop or stack the system board during the whole of the
procedure.
• If you put a system board down, make sure to put it only on a padded surface
such as an ESD mat or conductive corrugated material.
For access, remove these FRUs in order:
• “Battery pack” on page 31
• “Keyboard” on page 32
• “Base cover” on page 34
• “Hard disk drive” on page 39
• “DIMM” on page 38
• “PCI Express Mini Card for wireless LAN” on page 43
• “Thermal module” on page 42
Figure 15: Removal steps of system board
1
1
Step
Screw (quantity)
Color
Torque
M2.0 × 3.0 mm, flat round-head,
nylon-coated (2)
Black
1.35 kgfcm
Remove the two screws
46
.
Lenovo IdeaPad S110 Hardware Maintenance Manual
Figure 16: Removal steps of system board (continued)
2
2
2
3
2
Detach the six connectors in the directions shown by arrows
system board in the direction shown by arrow .
. Remove the
When installing: Make sure that all connectors are attached firmly.
47
Lenovo IdeaPad S110 Hardware Maintenance Manual
Speakers
For access, remove these FRUs in order:
• “Battery pack” on page 31
• “Keyboard” on page 32
• “Base cover” on page 34
• “Hard disk drive” on page 39
• “PCI Express Mini Card for wireless LAN” on page 43
• “System board” on page 46
Figure 17: Removal steps of speakers
1
1
2
1
1
2
Step
Screw (quantity)
Color
Torque
M2.0 × 3.0 mm, flat round-head,
nylon-coated (4)
Black
1.35 kgfcm
Remove the two side screws
for each speaker. Release the speaker cables
from the cable guides, and then remove the speakers in the direction shown by
arrows
.
48
Lenovo IdeaPad S110 Hardware Maintenance Manual
Touch pad bracket
For access, remove these FRUs in order:
• “Battery pack” on page 31
• “Keyboard” on page 32
• “Base cover” on page 34
• “Hard disk drive” on page 39
• “PCI Express Mini Card for wireless LAN” on page 43
• “System board” on page 46
Figure 18: Removal steps of Touch pad bracket
1
2
1
Step
Screw (quantity)
Color
Torque
M2.0 × 3.0 mm, flat round-head,
nylon-coated (2)
Black
1.35 kgfcm
Remove the two screws
arrow .
. Remove the metal cover in the direction shown by
49
Lenovo IdeaPad S110 Hardware Maintenance Manual
Figure 19: Removal steps of Touch pad bracket (continued)
3
4
Use a screwdriver to push and unlock the tabs
bracket in the direction shown by arrow
.
50
. Remove the touch pad
Lenovo IdeaPad S110 Hardware Maintenance Manual
LCD unit
For access, remove these FRUs in order:
• “Battery pack” on page 31
• “Keyboard” on page 32
• “Base cover” on page 34
Figure 20: Procedure to remove the LCD unit
1
2
1
2
Step
Screws (quantity)
Color
Torque
M2.0 × 5.0 mm, flat round-head,
nylon-coated (4)
Black
1.85 kgfcm
51
Lenovo IdeaPad S110 Hardware Maintenance Manual
Figure 21: Procedure to remove the LCD unit (continued)
Remove the six back screws . Detach the three connectors in the direction
shown by arrow . Remove the LCD unit.
When installing: Make sure that all connectors are attached firmly.
52
Lenovo IdeaPad S110 Hardware Maintenance Manual
LCD front bezel
For access, remove these FRUs in order:
• “Battery pack” on page 31
• “Keyboard” on page 32
• “Base cover” on page 34
• “LCD unit” on page 51
Figure 22: Removal steps of LCD front bezel
1
2
1
2
Step
2
Screw (quantity)
Color
Torque
M2.0 × 3.0 mm, flat round-head,
nylon-coated (2)
Black
1.35 kgfcm
Remove the two screws .
Remove the LCD front bezel in the direction shown by arrows
.
53
Lenovo IdeaPad S110 Hardware Maintenance Manual
LCD panel
For access, remove these FRUs in order:
• “Battery pack” on page 31
• “Keyboard” on page 32
• “Base cover” on page 34
• “LCD unit” on page 51
• “LCD front bezel” on page 53
Figure 23: Removal steps of LCD panel
1
1
3
1
1
2
Step
Screw (quantity)
Color
Torque
M2.0 × 3.0 mm, flat round-head,
nylon-coated (4)
Black
1.35 kgfcm
Remove the four screws . Detach the connector under the LCD panel
then remove the LCD panel in the direction shown by arrow .
54
, and
Lenovo IdeaPad S110 Hardware Maintenance Manual
Integrated camera
For access, remove these FRUs in order:
• “Battery pack” on page 31
• “Keyboard” on page 32
• “Base cover” on page 34
• “LCD unit” on page 51
• “LCD front bezel” on page 53
• “LCD panel” on page 54
Figure 24: Removal steps of integrated camera
2
1
The integrated camera is attached to the top center of the LCD cover. Lift the
integrated camera in the direction shown by arrow . Detach the connector in
the direction shown by arrow .
When installing: Attach the integrated camera to the top center of the LCD
cover and ajust the its placement to make sure the connector is attached firmly.
55
Lenovo IdeaPad S110 Hardware Maintenance Manual
Hinges
For access, remove these FRUs in order:
• “Battery pack” on page 31
• “Keyboard” on page 32
• “Base cover” on page 34
• “LCD unit” on page 51
• “LCD front bezel” on page 53
• “LCD panel” on page 54
Figure 25: Removal steps of hinges
1
1
1
2
1
1
1
2
Step
Screw (quantity)
Color
Torque
M2.0 × 3.0 mm, flat round-head,
nylon-coated (6)
Black
1.35 kgfcm
Remove the six screws
arrows .
56
, Lift and remove the hinges in the direction shown by
Lenovo IdeaPad S110 Hardware Maintenance Manual
Power button board
For access, remove these FRUs in order:
• “Battery pack” on page 31
• “Keyboard” on page 32
• “Base cover” on page 34
• “LCD unit” on page 51
• “LCD front bezel” on page 53
• “LCD panel” on page 54
• “Hinges” on page 56
Figure 26: Removal steps of power button board
1
2
The power button board is attached to the left side of the LCD cover.
Detach the connector in the direction shown by arrow . Remove the power
button board in the direction shown by arrow .
When installing: Attach the power button board to the left side of the LCD
cover and adjust its placement to make sure it is attached firmly.
57
Lenovo IdeaPad S110 Hardware Maintenance Manual
Antenna kit
For access, remove these FRUs in order:
• “Battery pack” on page 31
• “Keyboard” on page 32
• “Base cover” on page 34
• “LCD unit” on page 51
• “LCD front bezel” on page 53
• “LCD panel” on page 54
• “Hinges” on page 56
• “Power button board” on page 57
Figure 27: Removal steps of antenna kit
1
1
The antenna modules are attached to the left and right sides of the LCD cover.
Remove the antenna modules in the direction shown by arrows .
When installing: Stick the antenna modules to the sides of the LCD cover and
adjust their placement to make sure they are attached firmly.
58
Lenovo IdeaPad S110 Hardware Maintenance Manual
Locations
Top view
Attention:
• Do NOT open the display panel beyond 130 degrees. When closing the display
panel, be careful NOT to leave pens or any other objects in between the display
panel and the keyboard. Otherwise, the display panel may be damaged.
Integrated
camera
Use the camera for video communication.
Built-in
microphone
The built-in microphone (with noise reduction) can be
used for video conferencing, voice narration, or simple
audio recordings.
Computer
display
The computer display with LED backlight provides
brilliant visual output.
QS (Quick
Start) button
When the computer is powered off, press this button to
start Lenovo Quick Start.
OneKey
Rescue
system
button
When the computer is powered off, press this button to
start Lenovo OneKey Rescue system.
59
Lenovo IdeaPad S110 Hardware Maintenance Manual
Power
button
Press this button to turn on the computer.
System
status
indicators
-
Touchpad
The touchpad functions as a conventional mouse.
Wireless
module
antennas
The built-in antennas ensure optimal reception of
wireless radio.
Left-side view
AC power
adapter jack
Connect the AC adapter here.
VGA port
Connects to external display devices.
Fan louvers
Dissipate internal heat.
USB port
Connects to USB devices.
Combo
audio jack
Connects to headsets or headphones.
Attention:
• Listening to music at high volume over extended periods of time may damage
your hearing.
60
Lenovo IdeaPad S110 Hardware Maintenance Manual
Right-side view
USB port
Connects to USB devices.
RJ-45 port
This port connects the computer to an Ethernet network.
Lanyard
hole
Used for attaching a lanyard (not supplied).
Front view
Memory
card slot
Insert memory cards (not supplied) here.
61
Lenovo IdeaPad S110 Hardware Maintenance Manual
Bottom view
62
Battery
latch manual
The manual battery latch is used to keep the battery pack
secured in place.
Battery pack
-
Battery
latch spring
loaded
The spring-loaded battery latch keeps the battery pack
secured in place.
Speakers
The stereo speakers provide rich and powerful sound.
Lenovo IdeaPad S110 Hardware Maintenance Manual
Parts list
This section presents the following service parts:
• “Overall” on page 64
• “LCD FRUs” on page 68
• “Keyboard” on page 70
• “Miscellaneous parts” on page 77
• “AC adapters” on page 78
• “Power cords” on page 78
Note:
• Each FRU is available for all types or models, unless specific types or models
are specified.
63
Lenovo IdeaPad S110 Hardware Maintenance Manual
Overall
64
Lenovo IdeaPad S110 Hardware Maintenance Manual
Table 4.Parts list—Overall
FRU No. or
Lenovo P/N
No.
FRU
a-e
See “Miscellaneous parts” on page 77
1
LCD unit (see “LCD FRUs” on page 68)
2
S100 UPPER CASE BLACK
31050149
2
S100 UPPER CASE RED
31050636
2
S100 UPPER CASE BLUE
31050635
2
S100 UPPER CASE WHITE
31050777
3
S110 USB BOARD
90200145
4
Wlan, 802.11b/g/n, Wistron, DHXA-95(AR9285)
NA
4
Wlan, 802.11b/g/n, Bitland, BM8A36(RTL8188)
NA
4
Wlan, 802.11b/g/n, Castlenet, RTL8188CE(RTL8188)
NA
4
Wlan, Wimax, Intel 6250NX MOW M PCIE NB HMC
20002321
4
Wlan, Wimax, Intel 6150NX MOW M PCIE NB HMC
20002484
4
Wlan, Wimax, Intel 6150GX MOW M PCIE NB HMC
20002529
4
S100 PCIE-HALF WIFI DHXA-95(AR9285)
20002577
4
S100 PCIE-HALF WIFI BM8A36(RTL8188)
20002578
4
S100 PCIE-HALF WIFI RTL8188CE(RTL8188)
20002579
5
S110 MB N2600 W/WIFI/COMBO WO/USB3.0
90000030
5
S110 MB N2600 W/WIFI/COMBO/USB3.0
90000029
5
S110 MB N2800 W/WIFI/COMBO WO/USB3.0
90000033
6
S100 TP MODULE BLACK
31050148
6
S100 TP MODULE RED
31050750
6
S100 TP MODULE BLUE
31050749
6
S100 TP MODULE WHITE
31050776
7
S100 LOWER CASE BLACK
31050147
65
Lenovo IdeaPad S110 Hardware Maintenance Manual
Table 4.Parts list—Overall (Continued)
66
No.
FRU
FRU No. or
Lenovo P/N
8
S100 SPEAKER L+R
31050136
9
Keyboard (see “Keyboard” on page 70)
10
SATA Hard disk drive assembly, WD WD2500BPVT
5400RPM 250G
16200021
10
SATA Hard disk drive assembly, HGST
HTS543225A7A384 5400RPM7MM 250G
16005023
10
SATA Hard disk drive assembly, Seagate ST250LT003
5400RPM 7MM 250G
16005210
10
SATA Hard disk drive assembly, Toshiba MK2565GSX
5400RPM 250G
16004641
10
SATA Hard disk drive assembly, HGST
HTS545025A7E380 5400PRM7mm 250G HDD
16200069
10
SATA Hard disk drive assembly, WD WD3200BPVT
5400RPM320G
16200022
10
SATA Hard disk drive assembly, HGST
HTS543232A7A384 5400RPM7MM 320G
16005024
10
SATA Hard disk drive assembly, Seagate ST320LT020
5400RPM 7MM 320G
16005211
10
SATA Hard disk drive assembly, Toshiba MK3265GSX
5400RPM 320G
16004642
10
SATA Hard disk drive assembly, HGST
HTS545032A7E380 5400PRM7mm 320G
16200068
10
SATA Hard disk drive assembly, WD WD5000BPVT24HXZ 5400RPM 500G
16004846
10
SATA Hard disk drive assembly, Seagate
ST9500325AS 500G 9NB
16004189
10
SATA Hard disk drive assembly, HT
HTS547550A9E384 5400RPM 500G HDD
16200006
10
SATA Hard disk drive assembly, Toshiba MK5065GSX
5400RPM 500G
16004643
10
SATA Hard disk drive assembly, HGST
HTS545050A7E380 5400PRM7mm 500G HDD
16200067
Lenovo IdeaPad S110 Hardware Maintenance Manual
Table 4.Parts list—Overall (Continued)
No.
FRU
FRU No. or
Lenovo P/N
11
DDRIII 1333 1GB, MT8JTF12864HZ-1G4G1(V68A/
1Gb/50nm)
11200398
11
DDRIII 1333 1GB, M471B2873GB0-CH9(Rev G/1Gb/
35nm)
11013084
11
DDRIII 1333 2GB, M471B5773DH0-CH9 (Rev D /2Gb/
35nm)
11012808
11
DDRIII 1333 2GB, HMT325S6CFR8C-H9 N0(Gemma/
2Gb/38nm)
11200226
11
DDRIII 1333 2GB, RMT3010EC58E8F-1333(C/2Gb/
40nm)
11200060
11
DDRIII 1333 2GB, SP321NH08HAF(C/2Gb/45nm)
11200058
11
DDRIII 1333 2GB, MT8KTF25664HZ-1G4M1(V79D/
2Gb/42nm)
11200228
11
DDRIII 1333 2GB, NT2GC64B88G0NS-CG (G/2Gb/
42nm)
11200230
12
S110 Thermal Module W/Fan for6000RPM
90200125
13
Battery, 3 cell 2200 Ah, Celxpert (black), 2.2Ah,11.1V
121001129
13
Battery, 3 cell 2200 Ah, Simplo (black), 2.2Ah,11.1V
121001125
13
Battery, 6Cell 4400 Ah, Celxpert (black), 4.4Ah, 11.1V
121001127
13
Battery, 6Cell 4400 Ah, Simplo (black), 4.4Ah, 11.1V
121001123
67
Lenovo IdeaPad S110 Hardware Maintenance Manual
LCD FRUs
68
Lenovo IdeaPad S110 Hardware Maintenance Manual
Table 5.Parts list—LCD FRUs
No.
FRU
FRU No. or
Lenovo P/N
1
S110 LCD BEZEL W/carema hole black
90200126
1
S110 LCD BEZEL W/carema hole blue
90200127
1
S110 LCD BEZEL W/carema hole red
90200128
1
S110 LCD BEZEL W/carema hole white
90200129
2
Panel, 10.1" Flat type 1024x600, CMI N101LGEL41 SD G F LED1
18200140
2
Panel, 10.1" Flat type 1024x600, AUO B101AW06
V1 HW0A SD G F LED1
18200139
2
Panel, 10.1" Flat type 1024x600, SEC
LTN101NT08 XXXX
TBD
2
S100 CMI N101LGE-L41 WSVGA F NB LCD
18004990
2
S100 AUO B101AW06 V1 WSVGA F NB LCD
18004991
2
S100 Bitland BT101TN01 V3 WSVGA F NB LCD
18005235
3
S110 ANNTAN LEFT WHITE FOR WIFI+WIMAX
90200122
4
S100 POWER BOWER
11013589
5
S100 LCD BRACKET W/HINGE R
31050140
5
S100 LCD BRACKET W/HINGE L
31050137
6
S100 LCD COVER BLACK
31050145
6
S100 LCD COVER RED
31050632
6
S100 LCD COVER BLUE
31050631
6
S100 LCD COVER WHITE
31050774
6
S100 LCD COVER Flower
31051353
7
S100 LVDS CABLE
31050131
8
S110 Camera Board 0.3M USB2.0
90200120
8
S100 CAMERA 2.0M 1203-00038/4/6
31050124
69
Lenovo IdeaPad S110 Hardware Maintenance Manual
Keyboard
Table 6.Parts list—Keyboard
Language
Black
70
P/N
Chicony
Japanese
25010969
English
25010968
UK English
25010967
International English
25010966
Swiss
25010975
Slovenian
25010974
Icelandic
25010972
Belgian
25010971
Four Nordic countries
25010970
Hungarian
25010996
Hebrew
25010995
Greek
25010994
Dutch
25010993
Brazilian
25010991
Arabic
25010990
German
25010989
French
25010988
Russian
25010987
Traditional
Chinese
25010986
Korean
25010985
French&English
25010984
Latin
25010983
Portuguese
25010982
Thai
25010981
Lenovo IdeaPad S110 Hardware Maintenance Manual
Table 6.Parts list—Keyboard (Continued)
Language
P/N
Chicony
(Continued)
Black
(Continued)
Sunrex
Turkish
25010980
Spanish
25010979
Italian
25010978
Bulgarian
25010977
Czechoslovakia
25011165
Indian
25200336
English
25201418
UK English
25201419
Italian
25201420
Spanish
25201421
Turkish
25201422
Thai
25201423
Portuguese
25201424
Latin
25201425
French&English
25201426
Korean
25201427
Traditional Chinese
25201428
Russian
25201429
French
25201430
German
25201431
Arabic
25201432
Brazilian
25201433
Dutch
25201435
Greek
25201436
Hebrew
25201437
Hugarian
25201438
71
Lenovo IdeaPad S110 Hardware Maintenance Manual
Table 6.Parts list—Keyboard (Continued)
Language
P/N
Sunrex
(Continued)
Black
(Continued)
APLS
72
Four Nordic countries
25201439
Belgian
25201440
Icelandic
25201441
Slovenian
25201442
Swiss
25201443
International English
25201444
Bulgarian
25201445
Czechoslovakia
25201446
Indian
25201447
International English
25010937
Swiss
25010936
Slovenian
25010935
Icelandic
25010933
Belgian
25010932
Four Nordic countries
25010931
Hungarian
25010930
Hebrew
25010929
Greek
25010928
Dutch
25010927
Brazilian
25010925
Arabic
25010924
German
25010923
French
25010922
Russian
25010921
French&English
25010918
Traditional Chinese
25010920
Lenovo IdeaPad S110 Hardware Maintenance Manual
Table 6.Parts list—Keyboard (Continued)
Language
Black
(Continued)
White
P/N
APLS
(Continued)
Chicony
Korean
25010919
Latin
25010917
Portuguese
25010916
Thai
25010915
Turkish
25010914
Spanish
25010913
Italian
25010912
UK English
25010938
English
25010939
Japanese
25010940
Bulgarian
25010911
Czechoslovakia
25011170
Japanese
25009921
International English
25010010
Swiss
25010011
Slovenian
25010012
Icelandic
25010014
Belgian
25010015
Four Nordic countries
25010016
Hungarian
25010017
Greek
25010019
Dutch
25010020
Brazilian
25010022
Arabic
25010023
German
25010024
French
25010025
73
Lenovo IdeaPad S110 Hardware Maintenance Manual
Table 6.Parts list—Keyboard (Continued)
Language
P/N
Chicony
(Continued)
White
(Continued)
Sunrex
74
Russian
25010026
Traditional Chinese
25010027
Korean
25010028
French&English
25010029
Latin
25010030
Portuguese
25010031
Thai
25010032
Turkish
25010033
Spanish
25010034
Italian
25010035
UK English
25009926
English
25009924
Bulgarian
25010290
Czechoslovakia
25011163
Hebrew
25010018
Indian
25201627
English
25201448
UK English
25201449
Italian
25201450
Spanish
25201451
Turkish
25201452
Thai
25201453
Portuguese
25201454
Latin
25201455
French&English
25201456
Korean
25201457
Lenovo IdeaPad S110 Hardware Maintenance Manual
Table 6.Parts list—Keyboard (Continued)
Language
P/N
Sunrex
(Continued)
White
(Continued)
APLS
Traditional Chinese
25201458
Russian
25201459
French
25201460
German
25201461
Arabic
25201462
Brazilian
25201463
Dutch
25201465
Greek
25201466
Hebrew
25201467
Hugarian
25201468
Four Nordic countries
25201469
Belgian
25201470
Icelandic
25201471
Slovenian
25201472
Swiss
25201473
International English
25201474
Bulgarian
25201475
Czechoslovakia
25201476
Indian
25201477
Czechoslovakia
25011168
Bulgarian
25010292
International English
25009899
Swiss
25009900
Slovenian
25009901
Icelandic
25009903
Belgian
25009904
75
Lenovo IdeaPad S110 Hardware Maintenance Manual
Table 6.Parts list—Keyboard (Continued)
Language
White
(Continued)
76
P/N
APLS
(Continued)
Four Nordic countries
25009905
Hungarian
25009906
Hebrew
25009907
Greek
25009908
Dutch
25009909
Japanese
25009920
Brazilian
25009912
Arabic
25009913
German
25009914
French
25009915
Russian
25009916
Traditional Chinese
25009917
Korean
25009918
French&English
25010066
Latin
25010067
Portuguese
25010068
Thai
25010069
Turkish
25010070
Spanish
25010071
Italian
25010072
UK English
25009925
English
25009923
Lenovo IdeaPad S110 Hardware Maintenance Manual
Miscellaneous parts
Table 7.Parts list—Miscellaneous parts
FRU
FRU No. or
Lenovo P/N
(a) S100 HDD BRACKET
31050142
(b) S100 TP CABLE
31050127
(c) S100 DC-IN CABLE
31050151
(d) S100 TP BRACKET
31050144
(e) S100 RJ45 CONNECTER W/CABLE
31050180
77
Lenovo IdeaPad S110 Hardware Maintenance Manual
AC adapters
Table 8.Parts list—AC adapters
FRU
FRU No. or
Lenovo P/N
AC Adaptor, 30 W 20V,1.5A, Delta ADP-30SH BA 20V1.5A
36001806
AC Adaptor, 30 W 20V,1.5A, Litons PA-1300-12LC black
36001809
AC Adaptor, 30 W 20V,1.5A, Chicony CPA09-A030 20V1.5A
36001804
Power cords
Table 9.Parts list—3-pin power cords
78
Region (3 Pin)
P/N
CCC
• SSD YD-118-1+IEC53RVV+SSD-3-2B-1 1m
145000602
CCC
• LINETEK PC323+RVV300/300+LS15 1m
145000600
Argentina
• LINETEK LS15+H03VV-F+LP39 1m
145000599
Danmark
• LINETEK LS15+H03VV-F+LP-38 1m
145000598
Switzerland
• LINETEK LS15+H03VV-F+LP-37 1m
145000597
Brazil
• LINETEK LS15 H03VV-F LP26A 1m
145000596
Israel
• LINETEK LS15+H03VV-F+LP-41 1m
145000595
UL
• LINETEK LP-30B + SPT-2 + LS15 1m
145000594
UK
• LINETEK LP-61L+ H03VV-F+ LS15 1m
145000593
Indian
• LINETEK PE-361+ H05VV-F+ LS15 1m
145000592
Italy
• LINETEK LS15+H03VV-F+PE-336 1m
145000591
Lenovo IdeaPad S110 Hardware Maintenance Manual
Table 9.Parts list—3-pin power cords (Continued)
Region (3 Pin)
P/N
Korea
• LINETEK LS15+H05VV-F+LP-E04A 1m
145000590
Australia
• LINETEK LS15+H03VV-F+LP-23A 1m
145000589
Taiwan
• LINETEK LS15+VCTF+LP-53 1m
145000588
Japan
• LINETEK LS15+VCTF+LP-54 1m
145000587
Africa
• LINETEK LS15+H03VV-F+PE-364 1m
145000586
CE
• LINETEK LP-34+H03VV-F + LS15 1m
145000585
CCC
• Longwell LSG-31+RVV300/300+LS-18 1m
145000568
Argentina
• Longwell LP-24+H03VV-F+LS-18 1m
145000567
Danmark
• Longwell LP-40+H03VV-F+LS-18 1m
145000566
Switzerland
• Longwell LP-37+H03VV-F+LS-18 1m
145000565
Brazil
• Longwell LP-46+H03VV-F+LS-18 1m
145000564
Israel
• Longwell LP-41+H03VV-F+LS-18 1m
145000563
UL
• Longwell LP-30B+SPT-2 18AWG+LS-18 1m
145000562
UK
• Longwell LP-61L+H03VV-F+LS-18 1m
145000561
Indian
• Longwell LP-67+BIS+LS-18 1m
145000560
Italy
• Longwell LP-22+H03VV-F+LS-18 1m
145000559
Korea
• Longwell LP-486+KTLH03VV-F+LS-5 1m
145000558
79
Lenovo IdeaPad S110 Hardware Maintenance Manual
Table 9.Parts list—3-pin power cords (Continued)
80
Region (3 Pin)
P/N
Australia
• Longwell LP-23A+LFC-3R+LS-18 1m
145000557
Taiwan
• Longwell LP-71+VCTF+LS-33 1m
145000556
Japan
• Longwell LP-54+VCTF+LS-18 1m
145000555
Africa
• Longwell LP-39+H03VV-F+LS-18 1m
145000554
CE
• Longwell LP-34A+H03VV-F+LS-18 1m
145000553
• VOLEX GB10S3+RVV 300/500+VAC5S 1m
145000538
• VOLEX US15S3+SPT-2+VAC5S 1m
145000537
• VOLEX MP5004+H03VV-F+VAC5S 1m
145000605
• VOLEX IA6A3+IS694+VAC5S 1m
145000536
• VOLEX MP232+H03VV-F+VAC5S 1m
145000524
• VOLEX IT10S3+HO3VV-F+VAC5S 1m
145000535
• VOLEX MP233D+H03VV-F+VAC5S 1m
145000534
• VOLEX M2511+KETI IEC+VAC5S 1m
145000533
• VOLEX AU10S3+H03VV-F+VAC5S 1m
145000532
• VOLEX TW15CS3+VCTF+VAC5S 1m
145000531
• VOLEX VAC5S+VCTF+M755 1m
145000530
• VOLEX VA2073+H03VV-F+VAC5S 1m
145000528
• VOLEX CH10S3+H03VV-F+VAC5S 1m
145000527
• VOLEX SI16S3+H03VV-F+VAC5S 1m
145000526
• VOLEX M2511+HO3VV-F+VAC5S 1m
145000525
• VOLEX SA16A+HO3VV-F+VAC5S 1m
145000529
Lenovo IdeaPad S110 Hardware Maintenance Manual
Notices
Lenovo may not offer the products, services, or features discussed in this
document in all countries. Consult your local Lenovo representative for
information on the products and services currently available in your area. Any
reference to a Lenovo product, program, or service is not intended to state or
imply that only that Lenovo product, program, or service may be used. Any
functionally equivalent product, program, or service that does not infringe any
Lenovo intellectual property right may be used instead. However, it is the user’s
responsibility to evaluate and verify the operation of any other product, program,
or service.
Lenovo may have patents or pending patent applications covering subject
matter described in this document. The furnishing of this document does not
give you any license to these patents.
LENOVO GRO UP LTD. PROVIDES T HI S PUBLICATIO N “AS I S” WITHOUT
WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
NONINFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. Some jurisdictions do not allow disclaimer of express
or implied warranties in certain transactions, therefore, this statement may not
apply to you. This information could include technical inaccuracies or
typographical errors. Changes are periodically made to the information herein;
these changes will be incorporated in new editions of the publication. Lenovo
may make improvements and/or changes in the product(s) and/or the
program(s) described in this publication at any time without notice.
The products described in this document are not intended for use in
implantation or other life support applications where malfunction may result in
injury or death to persons. The information contained in this document does not
affect or change Lenovo product specifications or warranties. Nothing in this
document shall operate as an express or implied license or indemnity under the
intellectual property rights of Lenovo or third parties. All information contained in
this document was obtained in specific environments and is presented as an
illustration. The result obtained in other operating environments may vary.
Lenovo may use or distribute any of the information you supply in any way it
believes appropriate without incurring any obligation to you.
Any references in this publication to non-Lenovo Web sites are provided for
convenience only and do not in any manner serve as an endorsement of those
Web sites. The materials at those Web sites are not part of the materials for this
Lenovo product, and use of those Web sites is at your own risk.
Any performance data contained herein was determined in a controlled
environment. Therefore, the result obtained in other operating environments
may vary significantly. Some measurements may have been made on
development-level systems and there is no guarantee that these measurements
will be the same on generally available systems. Furthermore, some
measurements may have been estimated through extrapolation. Actual results
may vary. Users of this document should verify the applicable data for their
specific environment.
81
Lenovo IdeaPad S110 Hardware Maintenance Manual
Trademarks
The following terms are trademarks or registered trademarks of Lenovo in the
United States, other countries, or both.
Lenovo
IdeaPad
OneKey
Microsoft and Windows are trademarks of Microsoft Corporation in the United
States, other countries, or both.
Other company, products, or service names may be trademarks or service
marks of others.
82
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement