null  null
DEUTSCH
ENGLISH
FRANÇAIS
NEDERLANDS
ESPAÑOL
RCD 1300USB
(V. 3)
ENGLISH
LOCATION OF CONTROLS
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
14)
15)
16)
17)
18)
19)
20)
21)
22)
23)
24)
25)
26)
27)
28)
29)
LEATHER HANDLE
ALARM FUNCTION BUTTON
SLEEP FUNCTION BUTTON
PRESET EQ BUTTON
VOLUME UP/DOWN KNOB
POWER ON/STANDBY BUTTON
FUNCTIONS SELECTOR BUTTON
MEMORY/ID3/CLOCK-ADJ BUTTON
PLAY MODE BUTTON
FLODER UP BUTTON
SKIP UP
/DOWN
BUTTON
TUNING KNOB
BUTTON
PLAY/PAUSE
BUTTON
STOP
DISPLAY / SNOOZE BUTTON
LCD DISPLAY
USB SOCKET
3.5MM HEADPHONE JACK
SD CARD SLOT
CD DOOR OPEN/CLOSE
REMOTE SENSOR
DIAL POINTER
FM-STEREO LED INDICATOR
STANDBY LED INDICATOR
BAND / FM-MO/ST SELECTOR
ROD ANTENNA
AC SOCKET
BATTERY COMPARTMENT
CLOCK BACK-UP BATTERY
CAUTION:
USAGE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
THIS UNIT SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT QUALIFIED SERVICE PERSONNEL.
PRECAUTIONS FOR USE
INSTALLATION
•
•
•
UNPACK ALL PARTS AND REMOVE PROTECTIVE MATERIAL.
DO NOT CONNECT THE UNIT TO THE MAINS BEFORE CHECKING THE MAIN VOLTAGE AND BEFORE ALL
OTHER CONNECTIONS HAVE BEEN MADE.
DO NOT COVER ANY VENTS AND MAKE SURE THAT THERE IS A SPACE OF SEVERAL CENTIMETERS AT THE
BACK OF THE UNIT FOR VENTILATION.
AC CONNECTION
1.
2.
3.
CONNECT THE ONE END OF THE DETACHABLE POWER CORD TO THE AC SOCET (27) AND THE OTHER
END TO THE AC OUTLET.
WHEN YOU FIRST PLUG THE UNIT INTO THE MAINS, THE UNIT WILL GO INTO STANDBY MODE AND THE
STANDBY LED INDICATOR (24) WILL LIGHT UP, THE CLOCK AT LCD DISPLAY WILL SHOW AND START AT AM
12:00.
TURN ON THE POWER (6), IF THE LCD DISPLAY (16) IS ON WITH BACKLIGHTING, IT MEANS THE POWER
SUPPLY IS NORMAL. NOW YOUR SYSTEM IS READY TO PLAY THE MUSIC.
ENG 1
ENGLISH
DC CONNECTION
FOR DC OPERATION, PLEASE INSERT 6 PCS SIZE C (UM-2) BATTERY AT BATTER COMPARTMENT (28) AS
BELOW DIRECTION
SETTING THE CLOCK
1.
2.
3.
4.
SET UNIT AT STANDBY MODE.
PRESS THE “ MEM/ID3/CLK-ADJ ” BUTTON (8) TO ENTER CLOCK ADJUST MODE. THE LCD DISPLAY (16) WILL
OR SKIP
BUTTON (11) TO SELECT THE APPROPIATE AREA
SHOW “ 12HR OR 24HR“. PRESS SKIP
HOUR FORMAT(12HR/24HR). PRESS “ MEM/ID3/CLK-ADJ ” BUTTON (8) AGAIN TO CONFIRM.
THE LCD DISPLAY (16) WILL DISPLAY THE FIRST TWO DIGIT OF “00” IS FLASHING. PRESS SKIP
OR
BUTTON (11) TO SET THE CORRECT HOUR. PRESS “ MEM/ID3/CLK-ADJ ” BUTTON (8) TO STORE
SKIP
THE CORRECT HOUR.
THE THIRD & FOURTH DIGIT OF “00” IS FLASHING, PRESS THE SKIP
OR SKIP
BUTTON (11) TO SET
THE CORRECT MINUTES. THEN PRESS“ MEM/ID3/CLK-ADJ ” BUTTON (8) TO STORE THE CORRECT MINUTE.
TO AVOID THE RE-SET OF CLOCK FREQUENTLY WHEN USING DC OPERATION, PLEASE
INSERT 2 PCS AAA SIZE (UM-4) BATTERY AT THE CLOCK BACK-UP BATTERY COMPARTMENT
(29) IN THE DIRECTION AS BELOW DIRECTION:-
REMARK: PULL DOWN THE RIBBON WHILE INSERT THE BATTERY, THIS CAN HELP TO RELEASE IT
EASIER WHEN CHANGING THE BATTERY IN THE NEXT TIME.
LISTENING TO RADIO
OPERATION
1.
2.
3.
4.
TURN ON THE POWER (6) AND PRESS THE FUNCTION BUTTON (7) TO SELECT TUNER MODE.
SELECT THE DESIRE RADIO BAND (AM OR FM) AT “ BAND “ SELECTOR (25).
TURN THE TUNING KNOB (12)TO SET THE STATION FREQUENCY AS DESIRED.
ADJUST VOLUME KNOW (5) TO THE DESIRED VOLUME LEVEL.
HINTS FOR BEST RECEPTION:-
AM : THE RECEIVER HAS A BUILT-IN AM BAR ANTENNA. IF AM RECEPTION IS WEAK, SLIGHTLY ROTATE OR
RE-POSITIONING OF THE UNIT WILL USUALLY IMPROVE THE AM RECEPTION.
FM : THE RECEIVER HAS ROD ANTENNA (26) HANGING AT THE REAR CABINET. THIS WIRE SHOULD BE
TOTALLY UNRAVELED AND EXTENDED FOR BEST RECEPTION.
ENG 2
ENGLISH
FM & FM-STEREO RECEPTION
z
IF STEREO SIGNAL IS BEING RECEIVED, THE STEREO LED INDICATOR (23) WILL LIGHT UP TO SHOW FM
STEREO PROGRAM IS NOW RECEIVING & VICE VERSA
PLAYING COMPACT DISC
z
GETTING START
1.
2.
3.
PRESS FUNCTION BUTTON (11) TO SELECT “ CD ” MODE,
PRESS “ CD DOOR OPEN/CLOSE ” (20) TO OPEN THE CD DOOR.
PLACE A CD WITH THE PRINTED SIDE FACING UP INSIDE THE TRAY & THEN CLOSE THE CO DOOR BY
PRESSING THE “ CD DOOR OPEN/CLOSE “ (20) AGAIN.
FOCUS SEARCH IS PERFORMING, THE LCD DISPLAY (16) WILL SHOW THE TOTAL NUMBER OF TRACKS &
TOTAL PLAYING TIME.
4.
z
PLAY / PAUSE MODE
1.
PRESS THE “ PLAY/PAUSE
” BUTTON (13) TO START PLAYBACK, THE FIRST TRACK WILL START
PLAYBACK.
TO INTERRUPT, PRESS THE “ PLAY/PAUSE
” BUTTON (13) ONCE, AND THE PLAYING TIME WILL BE
FREEZE ON THE LCD DISPLAY (16). PRESS AGAIN TO RESUME NORMAL PLAYBACK.
2.
z
STOP MODE
1.
IF “ STOP
MODE.
z
SKIP MODE (SKIP UP
1.
DURING PLAY OR PAUSE MODE, IF “SKIP UP
” BUTTON (11) IS PRESSED. IT WILL GO TO NEXT TRACK
AND DISPLAY THE TRACK NO. AND THEN REMAIN THE PLAY OR PAUSE MODE.
DURING PLAY OR PAUSE MODE, IF “SKIP DOWN
” BUTTON (11) IS PRESSED. IT WILL GO BACK TO THE
BEGINNING OF THE TRACK, ORIGINAL TRACK NO. IS DISPLAY AND REMAIN THE PLAY OR PAUSE MODE.
AFTER STEP 2, PRESS “SKIP DOWN
” BUTTON (11) AGAIN WILL GO TO THE PREVIOUS TRACK AND
REMAIN THE PLAY OR PAUSE MODE.
2.
3.
” BUTTON (14) IS PRESSED DURING PLAY OR PAUSE MODE, SYSTEM WILL GO TO STOP
/ SKIP DOWN
)
z
FOR MP3 DISC
1.
AFTER FOCUS SEARCH IS PERFORMING, THE TOTAL NUMBER OF TRACK AND ALBUM WILL BE SHOWN ON
THE LCD DISPLAY (16).
PRESS “ FOLDER UP
OR DOWN
“ BUTTON AT REMOTE CONTROL TO SELECT THE FOLDER
NUMBER.
“ OR SKIP DOWN
(11) BUTTON TO SELECT THE TRACK NUMBER.
PRESS “ SKIP UP
” BUTTON
WHEN THE DESIRED TRACK AND FOLDER IS BEING SELECTED, PRESS THE “ PLAY/PAUSE
(13) TO START PLAYBACK.
2.
3.
4.
ID3 (TRACK/ALBUM TITLE) FUNCTION (BY REMOTE HANDSET)
DURING THE PLAYBACK OF MP3 TRACK, PRESS THE “ MEM/ID3/CLK-ADJ ” BUTTON (8) AND THE LCD DISPLAY
(16) WILL SHOW THE SONG TITLE / ARTIST NAME / ALBUM NAME IN ORDER ONCE TIME.
REMARK:- IN THAT CASE OF NO NAME OR NOT SUPPORTIVE LANGUAGES HAD BEEN ASSIGNED FOR THE MP3 TRACK,
“ NO INFO “ WILL SHOW ON LCD DISPLAY (16) WHEN PRESS THE “ ID3 “ BUTTON (8).
-
NO TITLE/ALBUM NAME CAN BE RECOGNIZED IF THE INPUT FORMAT ON THE DISC/MASS MEDIA IS NOT
SUPPORTING BY THE SYSTEM.
THE SYSTEM SUPPORT ONLY ENGLISH AND ARABIC NUMBER FOR ID3 FUNCTION
MP3 TRACK FORMAT REQUIREMENT:BIT RATE : 32 KBPS~320KBPS, SAMPLING RATE : 32KHZ, 44.1KHZ AND 48 KHZ DECODABLE
-
THE PERFORMANCE OF PLAYING MP3 DISC IS VARIOUS FROM THE QUALITY OF RECORDING DISC AND
THE METHOD OF RECORDING. FURTHERMORE, THE SEARCHING LEAD-TIME FOR MP3-CD IS LONGER
THAN NORMAL CD DUE TO DIFFERENCE FORMAT.
ENG 3
ENGLISH
z
REPEAT/INTRO/RANDOM MODE (BY REMOTE HANDSET)
PRESS THE “ PLAY MODE “ BUTTON DURING PLAYBACK TO SELECT REPEAT AND RANDOM FUNCTION, A
SINGLE TRACK, SINGLE FOLDER (MP3 ONLY) OR ALL THE TRACKS CAN BE PLAYED IN DIFFERENCE MODE AS
FOLLOW:-
FOR CD
(1) REPEAT 1
(2) REPEAT ALL TRACK
(3) RANDOM
(4) OFF MODE
INDICATOR
PLAY MODE
ON LCD DISPLAY
REPEAT 1 TRACK
REPEAT ALL
RANDOM
OFF MODE
RAN
--------------
FOR MP3/WMA DISC/FILE
(1) REPEAT 1
(2) REPEAT 1 FOLER
(5) OFF MODE
PLAY MODE
REPEAT SINGLE TRACK
REPEAT SINGLE FOLDER
REPEAT ALL TRACKS
RANDOM MODE
OFF MODE
z
(3) REPEAT ALL TRACKS
(4) RANDOM
INDICATOR
ON LCD DISPLAY
AND
RAN
-----------------
REPEAT PLAY
YOU CAN LISTEN THE DESIRED TRACKS OR FOLDER REPEATEDLY BY THIS FUNCTION.
z
RANDOM PLAY
YOU CAN LISTEN ALL THE TRACKS OR FOLDER IN A RANDOM ORDER BY THIS FUNCTION
CD / MP3 DISC PROGRAMMING (BY REMOTE CONTROL)
UP TO 20 TACKS CAN BE PROGRAMMED FOR DISC PLAY IN ANY ORDER. BEFORE USE, BE SURE TO PRESS
THE “ STOP
” BUTTON (14).
1. SET IN CD MODE & STOP THE CD PLAYBACK.
2. PRESS THE “ MEM/ID3/CLK-ADJ ” BUTTON (8), “ PROG “ WILL APPEAR & FLASHING ON LCD DISPLAY (16).
MOREOVER, IT WILL INDICATE PROGRAM NO. AND DIGITS FOR TRACK NO. TO BE PROGRAMMED – “ 0 P-01
“.
3. SELECT A DESIRED TRACK BY PRESSING SKIP UP
OR DOWN
BUTTONS (11) .
4. PRESS THE“ MEM/ID3/CLK-ADJ ” BUTTON (8) TO STORE THE TRACK INTO MEMORY.
5. REPEAT STEPS 3 AND 4 TO ENTER ADDITIONAL TRACKS INTO THE MEMORY IF NECESSARY.
” BUTTON (13) TO
6. WHEN ALL THE DESIRED TRACKS HAVE BEEN PROGRAMMED, PRESS “ PLAY/PAUSE
PLAY THE SONG IN ASSIGNED ORDER.
7. PRESS THE “ STOP
“ BUTTON (14) TO TERMINATE PROGRAM PLAY.
¾
¾
¾
AFTER PROGRAM COMPLETE, PRESS “ MEM/ID3/CLK-ADJ ” BUTTON (8) TO REVIEW THE TRACKS BEING
PROGRAMMED.
PRESS “ STOP
“ BUTTON (14) AT CD STOP MODE TO CANCEL ALL PROGRAMMED MEMORY UNTIL THE
“ PROG “ INDICATOR DISAPPEAR ON LCD DISPLAY (16).
FOR MP3 DISC / FILE, PRESS THE “ FOLDER UP “ BUTTON (10) TO SELECT THE 1ST TRACK OF NEXT FOLDER
DIRECTLY AND HENCE TO SPEED UP THE SONG SLECTION.
ENG 4
ENGLISH
PLAYBACK OF MP3/WMA SONG VIA USB STORAGE MEDIA OR MEMORY CARD
CONNECTING
THE SYSTEM IS ABLE TO DECODE AND PLAYBACK ALL MP3 /WMA FILE WHICH STORED IN THE MEMORY MEDIA
WITH USB CONNECTING PORT OR SD/MMC MEMORY CARD.
1.
2.
z
3.
4.
5.
SET THE SYSTEM AT STANDBY MODE FIRST OR OTHER FUNCTION
EXCEPT SD OR USB MODE.
PLUG-IN THE USB PEN-DRIVE WITH THE FACE UP & MAKE SURE IT GOING
INTO COMPLETELY OR INSERT THE MEMORY CARD IN THE DIRECTION
OF THE ARROW AS SHOWN IN THE LABEL ON THE UNDERSIDE OF THE
MEMORY CARD SLOT COVER. INSERT STRAIGHT WITHOUT BENDING.
CONNECTING THE USB UPSIDE DOWN OR BACKWARDS COULD
DAMAGE THE AUDIO SYSTEM OR THE STORAGE MEDIA (USB THUMB
DRIVE / SD/MMC CARD). CHECK TO BE SURE THE DIRECTION IS
CORRECT BEFORE CONNECTION.
PRESS FUNCTIONS BUTTON (7) TO “
“ SD CARD MODE OR “
“ USB MODE.
THE SYSTEM WILL START READING THE STORAGE MEDIA AUTOMATICALLY AFTER CONNECTING, AND LCD
DISPLAY (16) WILL SHOW THE TOTAL NUMBER OF MP3/WMA FILES BEING DETECTED.
REPEAT THE SAME PLAYBACK PROCEDURE AS PLAYING CD/MP3 DISC AS ABOVE.
REMARK
-
-
IF CONNECT THE SYSTEM TO MP3 PLAYER VIA THE USB SOCKET, DUE TO VARIANCES IN MP3 ENCODING
FORMAT, SOME MP3 PLAYER MAY NOT BE ABLE TO PLAY VIA THE USB SOCKET. THIS IS NOT A
MALFUNCTION OF THE SYSTEM.
USB PORT DOES NOT SUPPORT CONNECTION WITH USB EXTENSION CABLE AND IS NOT DESIGNED FOR
COMMUNICATION WITH COMPUTER DIRECTLY
REMOVING OF USB / MEMORY CARD
TO REMOVE THE USB / MEMORY CARD, TURN OFF THE POWER OR SWITCH THE FUNCTION MODE TO EITHER
CD OR TUNER MODE FIRST. FOR USB PORT – UN-PLUG IT BY PULLING OUT THE USB SOCKET DIRECTLY, FOR
MEMORY CARD – PRESS THE MEMORY CARD INWARD & THEN RELEASE, NOW THE CARD BEING PARTIALLY
EJECT AND YOU CAN REMOVE IT BY HAND.
MORE FEATURES
A. SLEEP SETTING
1. PRESS “ SLEEP ” BUTTON (3) AND SLEEP INDICATOR “
“ SHOWN ON THE LCD DISPLAY (16).
2. KEEP PRESSING THE BUTTON TO ADJUST THE SLEEP TIMER IN THE ORDER OF 90 > 80 > 70 > …..>10
MINUTES RESPECTIVELY.
3. SYSTEM WILL STOP AND GOTO STANDBY MODE AUTOMATICALLY AFTER THE SELECTED TIMING.
“ INDICATOR DISAPPEAR ON
4. TO CANCEL THE SLEEP MODE, PRESS “ SLEEP ” BUTTON (3) UNTIL THE “
LCD DISPLAY (16).
REMARK:IF PRESS THE SLEEP BUTTON ONCE AND THE “
“ INDICATOR APPEAR ON THE LCD (16), THE SYSTEM
WILL GOTO STANDBY MODE AUTOMATICALLY AFTER SELECTED MINUTES.
B. ALARM CLOCK SETTING
THIS FUNCTION ALLOWS THE SYSTEM TO TURN ON AUTOMATICALLY AND WAKE YOU UP BY
CD/TUNER/USB/SD OR BUZZER SOUND RESPECTIVELY.
FIRST, SET THE UNIT AT STANDBY MODE. THEN PRESS AND HOLD THE “ ALARM ” BUTTON (2) FOR FEW
SECONDS TO ENTER THE SETTING MODE, THE LCD DISPLAY (16) WILL SHOW “ ON TIME : AND THEN FIRST
TWO DIGITS OF CLOCK WILL FLASHING:1) WAKE UP TIME : PRESS SKIP UP
/ DOWN
“ BUTTON (11) TO SET THE HOUR & THEN PRESS “ ALARAM
“ BUTTON (2) AGAIN TO CONFIRM. THEN PRESS SKIP UP
/ DOWN
“ BUTTON (11) TO
SET THE MINUTES.
2) WAKE UP SOURCE : PRESS THE “ ALARM “ BUTTON (2) TO ENTER THE SOURCE MODE, PRESS SKIP UP
DOWN
“ BUTTON (11) TO SELECT CD, USB. SD. TUNER OR BUZZER MODE
RESPECTIVELY.
/
3) WAKE UP VOLUME : PRESS THE “ ALARM “ BUTTON (2) TO ENTER THE VOLUME SETTING MODE, THEN
/ DOWN
“ BUTTON (11) TO PRE-SET THE WAKE UP VOLUME
PRESS SKIP UP
LEVEL.
AFTER SELECTING THE TIME/SOURCE/VOLUME, PRESS AGAIN THE “ ALARAM “ BUTTON (2) TO CONFIRM THE
SETTING.
ENG 5
ENGLISH
REMARK:¾
THERE ARE ABOUT 5 SECONDS FOR ALARM SETTING MODE, THIS SYSTEM WILL RETURN TO NORMAL
MODE AUTOMATICALLY IF NO KEYS BEING PRESSED IN THIS TIME FRAME.
z ACTIVE/DE-ACTIVE TIMER FUNCTION
1.
TO ACTIVE THE TIMER, PRESS THE “ALARM” BUTTON (2) AT STANDBY MODDE UNTIL THE TIMER
2.
INDICATOR “
” IS SHOWN ON LCD DISPLAY (16).
TO CANCEL ALARM FUNCTION BY PRESS AGAIN “ ALARM ” BUTTON (2) UNTIL THE TIMER INDICATOR
“
” DISAPPEAR ON LCD DISPLAY (6).
REMARK:¾
¾
¾
z
DURING THE ALARM ON MODE, PRESS THE “ ALARM “ OR “ POWER ON/STANDBY “ BUTTON WILL SWTICH
OFF THE SYSTEM.
IF THERE IS NO MUSIC SOURCE BEING DETECTED (SUCH AS CD, USB OR SD) WHEN THE PRESET TIME IS
REACHED, SYSTEM WILL DEFULT TO “ BUZZER “ MODE FOR WAKE UP MODE AUTOMATICALLY.
FOR TUNER WAKE UP, THE SYSTEM WILL PRESET AT THE LATEST RADIO FRQUENCY BEING LISTENED
BEFORE SWITCHING OFF.
SNOOZE FUNCTION
DUEING THE ALARM ON MODE, PRESS “ SNOOZE “ BUTTON (15) ONCE TO TERMINATE THE ALARM MODE
TEMPORARILY, AND SYSTEM WILL RE-START AGAIN AFTER 10 MINUTES ON EACH PRESS. TO CANCEL THE
ALARM, PRESS THE “ ALARM “ (2) BUTTON OR POWER ON/STANDBY BUTTON (6) WHILE SYSTEM IS ON.
C. PRE-SET EQ FUNCTION (BY REMOTE CONTROL)
THIS UNIT PROVIDES 4 DIFFERENCES SOUND MODE TO ENHANCE YOUR LISTENING EXPERIENCE. YOU CAN
SELECT THE DESIRED EFFECT BY PRESSING THE “ PRESET EQ” BUTTON REPEATEDLY AT FOLLOWING
SEQUENCE:-
FLAT
JAZZ
ROCK
CLASSIC
POP
D. DISPLAY FUNCTION
FOR CONVERIENCE USAGE, PRESS “ DISPLAY/SNOOZE “ BUTTON (15) WHEN SYSTEM IS ON AT ANY MODE,
THE LCD DISPLAY (16) WILL SHOW THE CURRENT TIME.
SPECIFICATIONS
FM FREQUENCY
AM FREQUENCY
AC POWER SUPPLY
DC POWER SUPPLY
CLOCK BACK UP BATTERY
POWER CONSUMPTION
87,5 – 108 MHz
540 – 1600 KHz
AC 230V ~ 50Hz
9V 6x UM-2 / C 1.5V
3V 2x UM-4 / AAA 1.5V
19 W
ENG 6
ENGLISH
REMOTE CONTROL TRANSMITTER
CONTROL FUNCTIONS
BATTERY INSTALLATION (BATTERY NOT PROVIDED)
THE INFRA-RED TRANSMITTER REQUIRE 2 PCS “ AAA “ BATTERY FOR OPERATION
-
BUTTON DESCRIPTION
SNOOZE/DISPLAY
PRESS TO TERMINATE THE ALARM TEMPORARILY (10 MINUTES)
PRESS TO SHOW THE CURRENT TIME DURING CD/USB/SD PLAYBACK MODE
RESPECTIVELY.
FUNCTION
PRESS TO SELECT THE FUNCTIONS (CD/SD/USB/TUNER)
ON/STANDBY
PRESS TO SWITCH ON/STANDBY THE SYSTEM
SKIP UP
IN CD/USB/SD MODE : PRESS TO SELECT PREVIOUS / NEXT TRACK OR
PRESS & HOLD TO PERFORM FAST FORWARD/BACKWARD FUNCTION
IN ALARM SETTING MODE : PRESS TO SELECT DIFFERENCE SETTING
/DOWN
PLAY/PAUSE
IN CD/USN/SD MODE : PRESS ONCE TO START PLAYBACK AND PRESS AGAIN
TO STOP PLAYBACK TEMPORARILY
FOLDER UP /DOWN
IN USB/SD MODE : PRESS TO SKIP UP/DOWN THE MP3 FOLDER
STOP
IN CD/USB/SD MODE : PRESS TO TERMINATE PLAYBACK OR CANCEL
PROGRMMED TRACKS
MEM/ID3/CLK-ADJ
IN CD/SUB/SD MODE : PRESS TO ACTIVE PROGRAM FUNCTION
IN USB/SD PLAYBACK MODE : PRESS TO ACTIVE ID3 FUNCTION
IN STANDBY MODE : PRESS TO ADJUST THE CLOCK
PLAY MODE
PRESS TO ACTIVE REPEAT/RANDOM FUNCTION
SLEEP
VOLUME -/+
PRESS TO ACTIVE SLEEP FUNCTION
PRESS TO ADJUST VOLUME LEVEL UP/ DOWN
PRESET EQ
PRESS TO SELECT DIFFERENCE EQ MODE
Copyright by Wörlein GmbH, 90556 Cadolzburg, Germany, www.woerlein.com
ENG 7
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement