LG | 42GA6400 | Quick Start Guide | LG 42GA6400 Quick Start Guide

REMOTE CONTROL
Inserting batteries
QWERTY Side - Front
QWERTY Side - Back
1. Open the battery cover as shown
below.
(POWER)
Turn the TV on or off.
HOME
Access the homescreen.
Navigation Buttons
(up/down/left/right)
Move focus
2. Insert batteries into the remote
control.
BACK
Move to previous or superior step.
3. Close the battery cover as shown
below.
Trick play keys
rewind, play, pause, fast forward
INPUT
Selects input list.
VOICE
Searching by voice.
OK
Select item by pushing key.
Wheel
Spin the wheel up/down to scroll
up/down.
ESC
Cancel state or command
Tab
Move focus to the next step
Shift
Combination key for upper letter
Back
Move to previous or superior step.
Delete text
Enter
Finish text input
EXT PWR (Fn+Z)
Turn on/off external device
AMP PWR (Fn+X)
Turn on/off amplifier
GUIDE
Access the EPG on connected
set-top box.
(Available only on Live TV)
VOL
Adjust the volume level.
CH
Change TV channels.
Menu
Call option pop-up for activating
app.
Activate/deactivate the pointer
Gesture
Zoom in/out(Press and Hold)
Mute all sounds.
Change between 2D and 3D
mode.(Press and Hold)
Quick Setup Guide
GA6450 series
P/N:MBM63660451 (REV01-1302)
Space
Enter a space
(Fn+ )/ (Fn+ )
Zoom in/out
AMP VOL - (Fn+ )/AMP VOL + (Fn+
Volume up/down on audio receiver
TV
Activate TV player app
PIP
Activate/Deactivate PIP
INFO
Show channel information (available only on Live TV)
DVR
Enter DVR menu
How to pair the remote control
Press the Pointer button to pair the
remote control.
GA6400 series
Fn
Combination key with other keys
Ctrl
Combination key with other keys
For more information
How to use the zoom in/out gestures
1. Press and hold the Gesture button
for 2 seconds.
2. While holding the Gesture button,
draw a circle in a clockwise direction
to zoom in or counter-clockwise
direction to zoom out.
(This feature is only available in the
Chrome browser.)
Refer to manual or go to www.lg.com
)
CONNECTIONS
IR BLASTER SETTINGS
HOME
The Setup Wizard will begin when you turn on the TV for the first time. You can connect the LG remote to a
cable/satellite box by following the steps shown below.
You can see the screen shown above to start
the set up routine. There, select (A) to access
the IR blaster settings.
Check if the IR Blaster is firmly plugged into the IR Blaster
port and is placed near the remote sensor of your device as
shown above.
Live TV
Wireless
Next page
Channel
description
Launcher Bar
Wired
Input List & Settings
IR Blaster cable
* Please note that you need to have a Google account to setup
the TV. It makes it more convenient to use Google’s services and
automatically restores your personal apps after a software update.
HDMI or Component..
Place the IR Blaster so that
the infrared transmitter points
to the remote sensor of the
Cable/Satellite Box.
1
2
Router
Cable/Satellite Box
3
Select the correct port that is connected to the
cable/satellite box. You should see a TV signal once
the correct port is selected.
1
2
Connecting the cable/satellite box
Home theater/ Blu-ray player/ ...
3
The TV will generate a list of premium channels. Select
[Yes] if you receive any of these channels.
Select your lineup provider from the list. A TV signal should
appear once you pick the correct provider.
Your channels are analyzed.
If it is finished successfully. Select [Next].
Connect the TV to a router with a LAN cable.
Or connect with Wi-Fi by accessing Network Setup in the initial
Setup Wizard. For seamless internet streaming LG recommends a
stable 4Mbps broadband speed and 1.5Mbps as a minimum.
Use the appropriate cable that is provided from your cable or satelite provider to connect the cable/satellite box to the TV. Place the IR Blaster near
the remote sensor.
Other devices
Select your connected device type.
Connecting to a network
The TV will generate a test code to see if the remote is
properly working with the cable/satellite box. Press the CH
up and down to check the code. If the Channel doesn’t
change, then select [No, try next code] to repeat this step
until you find right code.
Select the correct cable/satellite box manufacturer.
Your LG remote is now set up to your cable/satellite box.
You can now access the channel guide or
connected set-top box with your remote.
Connect other devices
Connect the Audio amplifier and other devices to the TV if necessary.
PRIMETIME QUICK GUIDE
The new quick guide makes it easy to find live TV content well organized in categories (Movies, Drama, Sports, etc.).
Press the guide key anytime to bring up the best live TV content to you immediately.
Download PDF

advertising