LG | AF300 | User's Guide | LG AF300 User's Guide

User Guide
AT&T Wireless Home Phone
Wireless Home Phone (“WHP”) device is a mobile device that may be used
with home phone equipment in different locations in the U.S. WHP device
has a backup battery in the event of a power outage. However, a landline
phone requiring separate electric power to operate (e.g., cordless phones)
connected to a WHP device will not place or receive calls (including 911 calls)
during a power outage. For emergency calls, you may have to provide your
location address to the 911 operator. Landline home phone equipment is not
included. Provides voice service only. Not compatible with data or messaging
services, home security systems, fax service, medical alert systems, medical
monitoring systems, credit card machines, IP/PBX Phone systems, or dial-up
Internet service. May not be compatible with your DVR/Satellite systems,
please check with your provider. DSL customers should contact their provider
before transferring a phone number to ensure uninterrupted DSL Internet
service. WHP device is sold for use on the AT&T wireless network and cannot
be activated on other carriers’ wireless networks. If your WHP device is roaming,
AT&T’s off-net usage restrictions apply. Service provided by AT&T Mobility.
Portions © 2014 AT&T Intellectual Property. All rights reserved. AT&T is a
registered trademark of AT&T Intellectual Property. All other marks contained
herein are the property of their respective owners.
Portions copyright © 2014 LG ELECTRONICS.
All rights reserved.
No part of this publication may be excerpted, reproduced, translated or
utilized in any form or by any means, electronic or mechanical, including
photocopying and microfilm, without the prior written permission of LG
Electronics.
The manual is published by LG Electronics. We reserve the right to make
modifications on print errors or update specifications without prior notice.
Welcome to AT&T
Thank you for purchasing an AT&T Wireless Home Phone device
(Model: LG-AF300). To get the most from your new device, check
out our videos and interactive tutorials at att.com/whptutorial.
i
ii
Contents
Getting Started........................................................................................1
In the Box.................................................................................................................1
Getting to Know Your Device........................................................................2
How It Works.........................................................................................................4
Device Installation..............................................................................................4
Voicemail..............................................................................................................10
Transferring a Phone Number.....................................................................11
Using Your Device................................................................................. 12
Making Calls......................................................................................................... 12
Three-Way Calling............................................................................................ 12
Call Waiting..........................................................................................................13
Call Forwarding..................................................................................................14
Helpful Tips.........................................................................................................14
Important Information....................................................................... 17
E911 Service......................................................................................................... 17
Power Outages.................................................................................................. 17
Device Compatibility...................................................................................... 17
In-Home Wiring.................................................................................................18
Frequently Asked Questions............................................................19
Troubleshooting.................................................................................. 22
Specifications...................................................................................... 27
Safety Instructions............................................................................. 28
Battery Instructions...........................................................................30
Radio Frequency (RF) Energy........................................................... 31
FCC Compliance.................................................................................. 32
Warranty................................................................................................ 33
How to Get Warranty Service.................................................................... 35
Other Warranty Programs........................................................................... 35
iii
iv
Getting Started
In the Box
The package contains the following items:
AT&T Wireless Home Phone
Power plug
Power cord Back-up battery
For more detailed information on Light Indicators, please refer to the User Guide.
Transferringaphonenumbercantakeaboutfourdays,soyoushouldkeepa
phonepluggedintoyourwalljacktoreceivecallsonyouroldservice(including911)
untilyourtransfercompletes.However,youcanmakecallsimmediatelyonyour
WirelessHomePhonedevice.Checktransferstatusatatt.com/port.
On/Off
PowerInput
TelephonePorts
Transferring a Phone Number from a Prior Provider?
Power
Voicemail
Green: On
Green:New
NoColor:Off messagewaiting
NoColor:No
messagewaiting
Battery Charge
Green:High
Yellow:Medium
Red:Low
Wireless Service
BatteryCover
GreenBars:SignalStrength
(1to5=LowtoHigh)
SolidRedAntenna:NoService
Also Included
Your device should be located:
• Whereyouhaveastrongsignalfromacelltower,typicallynearawindowor
outsidewall.Signalstrengthmayvaryindifferentpartsofyourhome.
• N
earanelectricalwalloutlet.
The Wireless Home Phone device uses the AT&T cellular network and DOES NOT
use your home phone wall jacks.
Before You Begin
• F
orhelponsettingupyourAT&Tvoicemail,gotoatt.com/voicemailsetup.
•
Visit att.com/whptutorial toviewvideosandinteractivetutorialsonhowto
setup,useandtroubleshootyourWirelessHomePhonedevice.
• RefertoyourUserGuidefordetailedinformationaboutusingyourWireless
HomePhonedevice,includingadvancedtroubleshootingandfrequently
askedquestions.
• CallAT&TCustomerCareat800.331.0500forassistancewithyour
AT&Tservice.
Getting To Know Your Device
For More Information
Quick Start
AT&TWirelessHomePhone
User Guide
AT&T Wireless Home Phone
WirelessHomePhone(“WHP”)deviceisamobiledevicethatmaybeusedwithhomephoneequipmentindifferent
locationsintheU.S.WHPdevicehasabackupbatteryintheeventofapoweroutage.However,alandlinephone
requiringseparateelectricpowertooperate(e.g.,cordlessphones)connectedtoaWHPdevicewillnotplaceor
receivecalls(including911calls)duringapoweroutage.Foremergencycalls,youmayhavetoprovideyourlocation
addresstothe911operator.Landlinehomephoneequipmentisnotincluded.Providesvoiceserviceonly. Not
compatiblewithdataormessagingservices,homesecuritysystems,faxservice,medicalalertsystems,medical
monitoringsystems,creditcardmachines,IP/PBXPhonesystems,ordial-upInternetservice. Maynotbecompatible
withyourDVR/Satellitesystems,pleasecheckwithyourprovider.DSLcustomersshouldcontacttheirproviderbefore
transferringaphonenumbertoensureuninterruptedDSLInternetservice. WHPdeviceissoldforuseontheAT&T
wirelessnetworkandcannotbeactivatedonothercarriers’wirelessnetworks.ServiceprovidedbyAT&TMobility.
©2014AT&TIntellectualProperty.Allrightsreserved.AT&TisaregisteredtrademarkofAT&TIntellectualProperty.
MBM64697301(1.0)
PrintedinKorea
Quick Start
User Guide
1
Getting to Know Your Device
T
i
Battery Cover
Power Voicemail Battery Wireless
Charge Service
Power Input
L
On/Off
Telephone Ports
*
2
LED Indicators
The table below describes possible states for each of the LED
indicators.
Key
Icon Name
Status
Green Solid
Power
Off
Green Blinking
Voicemail
Off
Green Solid
Green Blinking
Yellow Solid
Yellow Blinking
Battery Red Solid
Charge Red Steady
Blinking
Red Rapid
Blinking
Off
Green Solid
(1 to 5 Bars)
Green Blinking
Wireless
Service Solid Red
Antenna
Blinking Red
Antenna
Condition
On
No power
New message waiting
No messages waiting
High
Battery in use (High)
Medium
Battery in use (Medium)
Low
Battery in use (Low)
Battery not installed
No charge
Signal Strength
(Low to High)
AT&T 3G MicroCell Service*
No service
Check SIM
* For MicroCell owners only; MicroCell sold separately.
3
How It Works
The Wireless Home Phone device uses the AT&T cellular network
to provide phone service to your cordless or corded home
phone(s). Place it anywhere in your house where you have a
wireless signal. It does not require the use of a home phone wall
jack like traditional home phone service.
The Wireless Home Phone device provides many calling services,
such as voicemail, Caller Number ID, Call Waiting, Call Forwarding,
and 3-way Calling for your home phone(s). It also includes a backup battery in case of a power outage.
Device Installation
Before You Begin
Wireless Home Phone device works exclusively with the AT&T
cellular network and DOES NOT use your home phone wall jacks.
Your device should be located:
• Where you have a strong cellular
signal from a cell tower, typically
near a window or outside wall.
Signal strength may vary in
different parts of your home.
• Near an electrical wall outlet.
Select which phone(s) you will use with the Wireless Home Phone
device:
• A cordless phone system with multiple handsets should be
used to place phones throughout your home.
• If using an existing phone, unplug it from the wall jack.
4
Install the Back-up Battery
Remove the cover from the battery compartment.
Insert the back-up battery and replace the cover.
Notes:
• The battery is intended for backup purposes only and may
take approximately three and a half (3.5) hours to fully charge
(battery will charge inside the device while connected to a
power supply).
• Charge time may be impacted by environmental factors and
the battery will stop charging when the ambient temperature
is outside of the temperature range allowed for charging
(32 °F - 131 °F).
5
Turn on Your Device
1) Connect the large end of the power cord into the power
plug. Insert the power plug into an electrical outlet.
2) Insert the small end of the power cord into the Power Input
port on the back of your Wireless Home Phone device.
3) S
lide the On/Off switch to the On position.
Check the Wireless Signal
More green bars indicate a stronger signal.
Your device can be relocated in your home for best
performance.
6
Connect the Device to a Phone
1) U
nplug your phone
from your home
phone wall jack.
2) Plug your phone into
the “Phone 1” port on
the Wireless Home
Phone device, using your
existing phone cable.
Connect the Device to a Phone
1) Unplug your phone
from your home
phone wall jack.
2) Plug your phone into the “Phone 1”
port on the Wireless Home Phone
Base, using your existing phone
cable or included phone cable.
IMPORTANT:
DO
NOT
the Wireless
IMPORTANT: DO
NOT
plugplug
the Wireless
Home Home
Phone Base
intoor
your
home
phoneinto
wall jack.
Phone
device
your
phones
your wall jacks.
Place a Test Call
Place a test call from your connected home phone. Make sure to use
10-digit dialing, even for local phone calls.
For best results, place the cordless phone base at least 12 inches from
the Wireless Home Phone Base.
NOTE: Keep your cordless phone plugged into a power outlet.
7
Place a Test Call
Place a test call from your connected home phone. Make
sure to dial the 10-digit phone number, including area code.
For best results, place the cordless phone base at least 12
inches from the Wireless Home Phone device.
Note: Keep your cordless phone plugged into a power outlet.
8
Set up Voicemail and Additional Phones
Voicemail is included with your service. Dial “1” to set up and
access. If you choose to use an answering machine instead,
set it to fewer than 4 rings. To place phones throughout your
home, use a cordless phone system with multiple handsets.
Wall jacks are not used with Wireless Home Phone.
Useful Tips
•
•
•
•
Transferring a phone number can take about four days, so you
should keep a phone plugged into your wall jack to receive calls
on your old service (including 911) until your transfer completes.
However, you can make calls immediately on your Wireless
Home Phone device. Check transfer status at att.com/port.
The “Phone 2” port can be used to connect an additional
phone or stand-alone answering machine. It uses the same
phone number as the “Phone 1” port.
Your AT&T Wireless Home Phone device does not support
incoming or outgoing fax service.
Your AT&T Wireless Home Phone device does not support
rotary or pulse-dialing phones.
9
Voicemail
Your Wireless Home Phone device comes with standard
wireless voicemail. Follow the steps below to set up and use your
voicemail.
Setup
Dial 1 on any home phone connected to the Wireless Home
Phone device and wait four (4) seconds to connect to your AT&T
wireless voicemail. Simply follow the voice prompts to complete
setup. To enable remote voicemail retrieval and for added security
be sure to create a password during setup.
For more help on setting up your AT&T voicemail, go to att.com/
voicemailsetup.
Message Waiting
There are two indicators for a new message waiting: 1) the
voicemail icon; and 2) an intermittent dial tone.
The voicemail icon
on your Wireless Home Phone device
blinks when a voicemail message is waiting. You will also hear an
intermittent dial tone on any connected phone handset before
placing a call.
Retrieving Messages
To retrieve voice messages, dial 1 on any home phone connected
to the Wireless Home Phone device and wait four (4) seconds
to connect to your AT&T wireless voicemail box. Simply follow
the voice prompts to listen to and manage your messages.
(Alternately, you may dial your 10-digit home phone number to
access your voicemail box.)
10
Remote Retrieval
To retrieve voicemail messages from a phone not connected to
the Wireless Home Phone device, dial the number associated
with your Wireless Home Phone service. When voicemail picks
up, press *. You will then be prompted to enter your password.
Simply follow the prompts to listen to and manage your voicemail
messages.
Transferring a Phone Number
Transferring a landline phone number to your Wireless Home
Phone device can take about four days. Outgoing calls can be
made immediately using your Wireless Home Phone device,
however incoming calls (including 911) will continue through
your old service until the transfer is complete. Keep a phone
connected to your existing home wiring or prior service to
continue to receive incoming calls until the transfer is complete.
To check the status of your transfer, visit att.com/port.
11
Using Your Device
Making Calls
Using a phone connected to your Wireless Home Phone device,
place and receive calls as you normally would. The Wireless Home
Phone device supports both cordless and corded phone dialing
methods.
Note: You will need to dial 10 digits even for local numbers.
Three-Way Calling
While on an existing call, press the Flash (or Phone/Talk) key
on your phone to put the first party on hold. When you hear a
dial tone, dial the second party’s number (wait up to four [4]
seconds). When the second party answers, press the Flash (or
Phone/Talk) key again to complete the three-way connection. If
the second party does not answer, press the Flash (or Phone/
Talk) key to end the connection and return to the first party.
Note: If your phone does not have a Flash (or Phone/Talk) key,
use the off-hook mechanism supported by your phone instead.
12
Call Waiting
You will hear two tones if someone calls while you are already on a
call. To hold the current call and accept the waiting call, press the
Flash (or Phone/Talk) key.
You can press the Flash (or Phone/Talk) key anytime to switch
back and forth between calls.
To clear the current call and accept the waiting call, enter 1 and
press the Flash (or Phone/Talk) key.
To reject the waiting call, enter 0 and press the Flash (or Phone/
Talk) key.
Notes:
• Your Wireless Home Phone comes with standard three-way
calling and call waiting. Operation of these features will vary
depending on your home phone equipment.
• If your phone does not have a Flash (or Phone/Talk) key, then
use the off-hook mechanism supported by your phone.
13
Call Forwarding
To forward all calls, dial:
1) *21*
2) The 10-digit number to which you wish to forward your calls
3) # key
(Example: *21*1234567890# forwards your calls to the phone
number 123-456-7890)
Please wait at least three (3) seconds and you hear a confirmation
tone for the forwarding to complete before hanging up.
To un-forward calls, dial #21#, please wait at least three (3)
seconds and you hear a confirmation tone for the un-forwarding
to complete before hanging up.
Note: Applicable wireless minute plan rates apply to forwarded calls.
Helpful Tips
Home Answering Machines
If you choose to use your home answering machine instead of the
voicemail provided by your Wireless Home Phone, you will need
to set your answering machine to pick up calls before network
voicemail, which is fewer than four (4) rings. If you have a standalone answering machine, you can connect it to the “Phone 2”
port on the back of your Wireless Home Phone device.
14
Adjusting Volume
Use your home phone’s volume adjustment if available.
Alternately, the volume of the Wireless Home Phone device can
be adjusted if necessary. To adjust the ring tone volume (while not
on a call) or call volume (while on a call), dial:
• **1# for Lowest setting
• **2# for Medium setting
• **3# for Highest setting
Notes:
• Three volume levels are available; the default setting is the
medium at level 2.
• Your home phone(s) may have a separate volume level setting
function that is independent of the Wireless Home Phone
device.
Powering On/Off
The On/Off switch is used to turn your Wireless Home Phone
device on or off. When powered off, the Wireless Home Phone
device will no longer send or receive calls, but it will continue to
charge the back-up battery if still connected to the wall outlet.
To turn the Wireless Home Phone device on, slide the On/Off
switch to the On position. To turn it off, slide the On/Off switch to
the Off position.
15
AT&T 3G MicroCell™
The Wireless Home Phone device can be used with the AT&T 3G
MicroCell when it’s within range of the MicroCell signal and the
phone number associated with the Wireless Home Phone device
has been added to the MicroCell’s approved user list. To update
your approved user list, visit att.com/3GMicroCell and click
“Manage Settings.”
The Wireless Service indicator on your Wireless Home Phone
device will blink green when connected to the MicroCell.
TTY Support
TTY (Text Telephony) and TDD (Telecommunications Device for
the Deaf) are supported by the Wireless Home Phone device. In
order to use the TTY network, you must have a TTY-compatible
phone and be in TTY mode. Note that most digital wireless
devices are TTY-compatible.
Dial *889n# to set the TTY mode.
• n = 0: TTY off mode. The standard voice speaking mode and
listening mode. This is the default setting.
• n = 1: TTY full mode. Transmit and receive the TTY characters.
• n = 2: VCO mode. Receive TTY characters but transmit by
speaking into the speaker.
• n = 3: HCO mode. Transmit TTY characters but receive by
listening to the receiver.
16
Important Information
E911 Service
For emergency calls, you may have to provide your location
address to the 911 operator.
Power Outages
The Wireless Home Phone device has a back-up battery in the
event of a power outage with talk time of approximately 4 hours
depending on environmental factors. However, a landline phone
requiring separate electric power to operate (e.g., cordless
phones) connected to a Wireless Home Phone device will not
place or receive calls (including 911 calls) during a power outage.
Device Compatibility
The Wireless Home Phone device is not compatible with data or
messaging services, home security systems, fax service, medical
alert systems, medical monitoring systems, credit card machines,
IP/PBX Phone systems, or dial-up Internet service. May not be
compatible with your DVR/Satellite systems, please check with
your provider. DSL customers should contact their provider
before transferring a phone number to ensure uninterrupted DSL
Internet service. The Wireless Home Phone device cannot be used to make 500,
700, 900, 976, 0+ collect, operator assisted, or dial-around calls
(e.g. 1010-XXXX).
17
In-Home Wiring
Interconnecting to home telephone wiring is not necessary, but
is possible; however, it is not recommended unless you possess
sufficient knowledge of electrical systems. Use with home wiring
requires the physical disconnection from other services, including
the landline coming into your home. Use of a qualified licensed
electrician is highly recommended. Improper installation may
result in phone equipment damage or even a fire.
18
Frequently Asked Questions
What kind of phone do I need to work with the Wireless Home
Phone device?
Most standard touch-tone phones may be used. Rotary phones
are not supported. Cordless phone systems provide the most
flexibility and allow you to easily place additional handsets
throughout your home. Cordless phone systems still need to be
plugged into a power outlet.
During a power outage, a standard corded phone which doesn’t
require electrical power is needed.
How do I install my Wireless Home Phone device?
Refer to pages 4-9 of this guide for the most common installation
methods. Other helpful information:
• Installation near a window or outside wall is strongly
recommended to ensure the strongest possible wireless signal
in order to maximize voice quality.
• If your voice quality is unacceptable, your device may not have
sufficient signal strength (green bars). You may need to relocate
the device to another area of your home with a stronger wireless
signal.
Will my Wireless Home Phone device work in areas with no or
low wireless signal strength?
A strong wireless signal (three to five green bars) is recommended
for optimal performance. A moderate signal (one to two green
bars) may be sufficient. If you do not see three to five bars, you
may want to choose an alternate location.
19
Does the Wireless Home Phone device support data or text
messaging?
No, only voice services are supported.
Why don’t I see the name of the caller on caller ID?
The Wireless Home Phone device, similar to other wireless
devices, supports calling number identification. However, contact
names stored on your home phone equipment may display for
incoming calls.
Do I need broadband Internet service for the Wireless Home
Phone device to work?
No, the service is provided through the AT&T wireless network.
Can I move my Wireless Home Phone device and use it in
another location?
Yes, you can use your device anywhere in the U.S where AT&T is
authorized to provide wireless services. All you need is an available
wireless signal and power outlet.
When I dial a seven-digit number using the Wireless Home
Phone device, I get a message that the number cannot be
completed as dialed. Does the Wireless Home Phone device
support seven-digit dialing?
The Wireless Home Phone device requires 10-digit dialing for
domestic calls in most areas.
Can I make international calls with my Wireless Home Phone
device?
Yes. To add international calling to your account, please call 611
from your connected phone, or 1-800-331-0500.
20
Can I use my Wireless Home Phone device internationally?
No. Use is limited to the United States, Puerto Rico, U.S. Virgin
Islands, Guam, and Northern Mariana Islands.
What is the warranty on the Wireless Home Phone device?
AT&T Wireless Home Phone device has a 12-month limited
warranty. For details, see page 33-34.
I can’t make or receive calls with my Wireless Home Phone
device. What should I do?
Follow the troubleshooting steps found on the following pages.
If further assistance is required, call 1-800-331-0500.
21
Troubleshooting
Problem
No dial tone
•
•
•
Caller Number
ID only
•
•
Battery LED is
off
22
•
Possible Solution
Make sure the device is turned on (Power
indicator is green) and there is AC power to
the Wireless Home Phone device. Do not
connect to an AC outlet controlled by a wall
switch.
Move the device to an area with sufficient
network signal (at least 1 to 2 green bars are
displayed).
Make sure your home telephone equipment
has power and is connected properly to the
Wireless Home Phone device.
Like all wireless services, only the calling
number is displayed with Caller ID.
Your home phone equipment may support
the display of names stored in its contacts
memory.
Plug your Wireless Home Phone device into
an AC outlet to charge the battery.
Problem
Poor voice
quality
•
•
•
•
•
Wireless Service
indicator is
blinking green
Wireless Service
indicator
displays a solid
red antenna
and no bars
•
•
Possible Solution
Make sure all connections are firmly in place.
Move your device to another area of the
home with a strong wireless signal (3 green
bars or more), typically near a window or
outside wall.
Make sure the home phone that is
connected to the Wireless Home Phone
device is of good quality and in good working
order.
Increase the distance away from other
electronic devices and the Wireless Home
Phone device (including cordless phone
base stations, Wi-Fi routers, and cell
phones).
Voice quality may degrade with a low battery
charge (red). Connect to an AC power
source to recharge when power is available.
The Wireless Home Phone device is
connected to a 3G MicroCell, and is
operating properly.
Move your device to another area of the
home with sufficient network signal (at least
1 to 2 green bars are displayed).
23
Problem
Wireless Service
indicator
displays a
blinking red
antenna and no
bars
•
•
Can’t connect
to my 3G
MicroCell
•
•
•
SIM Card
doesn’t work
in my mobile
device
24
•
Possible Solution
SIM is missing or not installed properly.
1) Remove the battery cover and back-up
battery.
2) Slide the SIM card into the SIM card slot.
Make sure the gold contact area on the
card is facing downwards.
SIM card may be invalid or damaged and
need to be replaced. For a replacement
SIM card, take your Wireless Home Phone
device to your local AT&T store. Or, call AT&T
Customer Care at 1-800-331-0500.
Add the phone number associated with
your Wireless Home Phone device to your
3G MicroCell Approved User List.
Power cycle your 3G MicroCell as well as
your Wireless Home Phone device.
Make sure the Wireless Home Phone device
is within range of the 3G MicroCell.
The SIM card provided with your Wireless
Home Phone device is intended for use
only in your specific Wireless Home Phone
device and can not be used in a mobile
handset.
Problem
Message Waiting
indicator on my
home phone
doesn’t light
My phone
doesn’t ring
when a call
comes in
•
•
•
•
•
•
Possible Solution
The Wireless Home Phone device does not
support this functionality with your home
phone.
The Wireless Home Phone device has a
dedicated Message Waiting indicator light
and will blink when you have a new voice
message. You will also hear an intermittent
dial tone when you pick up your handset.
If you recently transferred your landline
number, you will continue to receive
incoming calls on your previous service until
the transfer is complete. To check transfer
status, visit att.com/port.
Make sure your Wireless Home Phone
device is NOT connected to your in-home
phone wiring.
Make sure your home phone is powered on
and connected to the Wireless Home Phone
device.
Your Wireless Home Phone device number
may be set to Call Forward. Dial #21# to
un-forward calls.
25
Problem
My answering
machine won’t
pick up calls
•
•
I hear a constant
low frequency
tone (not dial
tone) when I try
to place a call
I hear an
intermittent dial
tone
26
•
•
•
Possible Solution
Set your answering machine settings to pick
up calls before network voicemail, which is
approximately four (4) rings.
Or, you can have network voicemail
removed from your account by calling
AT&T Customer Care. Dial 611 from your
connected phone or 800-331-0500.
Hang up your home phone to restore dial
tone.
You will hear an intermittent dial tone when
you have a new voicemail message waiting.
Dial 1 from your home phone connected to
the Wireless Home Phone device to review
your voice messages.
Specifications
Dimensions (W×D×H)
Weight
Back-up Battery
Talk time
Standby time
4.73" (W) × 4.73" (D) × 1.00" (H)
6.35 oz. (including back-up battery)
1,700 mAh(Typ)
Approximately 4hrs (2G and 3G)
Up to 38hrs
Note: The value of the talk time or standby time varies with the
actual environment.
27
Safety Instructions
WARNING: This product contains chemicals known to the
State of California to cause cancer and birth defects or other
reproductive harm. Wash hands after handling.
• During a thunderstorm, disconnect the external power supply
and do not use the device.
• Some electronic devices are susceptible to electromagnetic
interference sent by devices that may not be adequately
shielded. For best performance, position the Wireless Home
Phone device as far from these types of devices (TV sets, radios
and other automated office equipment) as possible so as to
avoid possible electromagnetic interference.
• Do not use the device in hospitals.
• Do not use the device on board aircraft.
• Operating of the device may interfere with medical devices
like hearing aids and pacemakers. Consult a physician or the
manufacturer of the medical device before using.
• Be aware of usage limitations when using the device at places
such as oil warehouses or chemical factories, where there are
explosive gases or explosive products being processed. Even if
your terminal is in idle state, it still transmits radio frequency (RF)
energy.
• Please put the device in a safe place. The device may cause
injury if used as a toy by children.
• Do not put other things on the terminal to avoid overheating.
• Please use original accessories or accessories that are approved
by vendor. Using any unapproved accessories may affect your
device’s performance, damage your terminal, or even cause
danger to you and violate related national regulations about
28
•
•
•
•
•
•
telecom terminals.
Because the device can produce an electromagnetic field, do
not place it near magnetic items such as computer disks.
Do not expose the device to direct sunlight or store it in hot
areas. High temperatures can shorten the life of electronic
devices.
Prevent liquids from leaking into the device.
Do not attempt to disassemble the device by yourself. Nonexpert handling of the device may cause bodily injury or device
damage.
Do not install or remove the SIM card when the power is on.
Do not place the battery or device in a microwave oven. The
battery and device will overheat, catch fire or explode, resulting
in serious bodily injury, death or property damage.
29
Battery Instructions
•
•
•
•
•
•
•
•
•
•
•
30
Do not disassemble or open crush, bend or deform, puncture
or shred.
Do not modify or remanufacture, attempt to insert foreign
objects into the battery, immerse or expose to water or other
liquids, expose to fire, explosion or other hazard.
Only use the battery for the system for which it is specified
Only use the battery with a charging system that has been
qualified with the System per CTIA Certification Requirements
for Battery System Compliance to IEEE1725.
Use of an unqualified battery or charger may present a risk of
fire, explosion, leakage, or other hazard.
Do not short circuit a battery or allow metallic conductive
objects to contact battery terminals.
Replace the battery only with another battery that has been
qualified with the system per this standard, IEEE-Std-1725. Use
of an unqualified battery may present a risk of fire, explosion,
leakage or other hazard.
Promptly dispose of used batteries in accordance with local
regulations
Battery usage by children should be supervised.
Avoid dropping Wireless Home Phone device or battery. If
Wireless Home Phone device or battery is dropped, especially
on a hard surface, and the user suspects damage, take it to a
service center for inspection.
Improper battery use may result in a fire, explosion or other
hazard.
Radio Frequency (RF) Energy
This device complies with radio frequency (RF) exposure limits
adopted by the Federal Communications Commission for an
uncontrolled environment.
This device should be installed and operated with minimum
distance of 20 cm between the device & your body.
31
FCC Compliance
This device complies with part 15 of FCC rules.
Operation is subject to the following two conditions.
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including
interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by
the manufacturer could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
FCC ID: ZNFAF300
32
Warranty
LG offers you a limited warranty that the enclosed subscriber unit
and its enclosed accessories will be free from defects in material
and workmanship for a period that expires one (1) year from
the date of sale of the Product to you, provided that you are the
original end-user purchaser of the Product and provided that your
purchase was made from a supplier authorized by the Seller.
Transfer or resale of a Product will automatically terminate
warranty coverage with respect to that Product. This limited
warranty is not transferable to any third party, including but not
limited to any subsequent purchaser or owner of the Product.
This limited warranty is applicable only to end users in the United
States.
This product or phone is warrantied for 12 months from date of
purchase.
For warranty service information, please call LG service
number 1-800-793-8896. The manufacturer’s website, http://
us.lgservice.com, is also available for assistance.
This warranty only applies if the product has been used in
accordance with the manufacturer’s instructions under normal
use and with reasonable care.
What this warranty does not cover:
a) D
efects or damages resulting from the misuse of this
product.
b) D
efects or damages from abnormal use, abnormal
conditions, improper storage, exposure to moisture,
dampness or corrosive environments, unauthorized
modifications, unauthorized repair, neglect, rough handling,
abuse, accident, alteration, improper installation, incorrect
voltage application, food or liquid spoilage, acts of God.
c) Normal wear and tear.
33
d) If the Product has been opened, modified or repaired
by anyone other than a warranty service center or if it is
repaired using unauthorized spare parts.
e) If the serial number or mobile accessory date code has
been removed, erased, defaced, altered, or are illegible in
any way subject to sole judgment of LG.
LIMITED WARRANTY
TO THE EXTENT PERMITTED BY APPLICABLE LAW, THIS LIMITED
WARRANTY IS YOUR SOLE AND EXCLUSIVE REMEDY AGAINST
LG AND LG’S SOLE AND EXCLUSIVE LIABILITY IN RESPECT OF
DEFECTS IN PRODUCT. HOWEVER, THIS LIMITED WARRANTY
SHALL NOT EXCLUDE NOR LIMIT ANY OF YOUR LEGAL
(STATUTORY) RIGHTS UNDER THE APPLICABLE NATIONAL
LAWS.
TO THE EXTENT PERMITTED BY APPLICABLE LAW LG DOES
NOT ASSUME ANY LIABILITY FOR LOSS OF OR DAMAGE TO OR
CORRUPTION OF DATA, FOR ANY LOSS OF PROFIT, LOSS OF
USE OF PRODUCTS OR FUNCTIONALITY, LOSS OF BUSINESS,
LOSS OF REVENUES OR LOSS OF ANTICIPATED PROFIT,
INCREASED COSTS OR EXPENSES OR FOR ANY INDIRECT, OR
SPECIAL OR CONSEQUENTIAL LOSS OR DAMAGE. TO THE
EXTENT PERMITTED BY APPLICABLE LAW, LG’S LIABILITY SHALL
BE LIMITED TO THE PURCHASE VALUE OF THE PRODUCT.
THE ABOVE LIMITATIONS SHALL NOT APPLY TO DEATH OR
PERSONAL INJURY CAUSED BY DEFECT OF PRODUCT IN
MATERIAL, DESIGN, AND WORKMANSHIP.
34
How to Get Warranty Service
To obtain warranty service, please call or fax to the following
telephone numbers from anywhere in the continental United
States:
Tel. 1-800-793-8896 or Fax. 1-800-448-4026
Or visit http://us.lgservice.com. Correspondence may also be
mailed to:
LG Electronics Service- Mobile Handsets, P.O. Box 240007,
Huntsville, AL 35824
DO NOT RETURN YOUR PRODUCT TO THE ABOVE ADDRESS.
Please call or write for the location of the LG authorized service
center nearest you and for the procedures for obtaining warranty
claims.
Other Warranty Programs
You may have other warranty programs with your purchase, such
as warranty exchange. If so, please refer to equipment package or
the original point of sale.
35
Notes
N
Notes
Notes
N
Notes
Notes
MFL68603701 (1.0) Printed in Korea
Download PDF

advertising