Handkey II Biometric Hand Geometry Reader

Handkey II Biometric Hand Geometry Reader
Biometric Hand Geometry Reader
Nothing is tougher!
Our HandKey II product is ideal for applications where consistent and dependable security is of prime importance. The product is easy to maintain, and provides an ideal mix of convenience, security and peace of mind.
Top 10 reasons to select Hand Geometry
Field proven reliability
1. Hundreds of thousands of HandKeys are installed all over
the world in diverse applications providing millions of error
free transactions every day
Convenience and cost savings
2. Incredibly fast installation & intuitive enrollment increases
user convenience
3. Verification in less than 1 second makes it ideal for high throughput applications
4. High product quality + Low maintenance costs = Low total
cost of ownership
5. Eliminate the worry of lost, stolen or unauthorized transfer
of ID cards plus the cost of purchasing and maintaining
these cards
Eliminate privacy concerns
6. Hand Geometry technology is well accepted by end users as
there are NO fingerprints or palm prints taken and the user
does not leave behind any trace of their biometric data
Amazing versatility
7. HandKeys can be used as standalone systems to protect
critical access points that can be easily integrated into
virtually every new or existing access control system in the
market today
8. Ability to customize user specific security levels, time zones,
holidays and languages based on your needs
9. Optional access control template management software
allows the HandKeys to form a system that communicates
alarms and transactions in real time, provides activity
reports, allows supervised on-site or remote user enrollment
and expiring privileges for temporary access
10.Environmental enclosures and integrated heater units make
the HandKey an ideal solution for outdoor usage
Features and Benefits
• Convenience of multiple credential options such as
proximity, magnetic stripe, barcode, HID iCLASS® and
MIFARE®
• Field installable Ethernet module
• Outdoor enclosure options that make the HandKey II an
ideal solution for outdoor usage
• Field upgradable and expandable memory options from
512 to 259,072 users for scalable security that grows
with your needs
• Three user-definable outputs to connect to auxiliary
devices such as audible or silent alarms, door locks or
lighting systems
• Ability to write the industry’s most compact biometric
template on a card instead of in a database results in
higher security & unlimited user capacity
• Specially formulated antimicrobial coating with silver
ions on the platen to inhibit the growth of bacteria,
mold and mildew to mitigate hygiene concerns. The
coating is safe and lasts for the life of the product
• Blue hand outline on the platen facilitates easy enrollment and reduces error rates during verification
HandKey® II Biometric HandReader
Biometrics
HandKey® II
Door control and monitoring
Each HandKey II is a complete, integrated door controller
providing lock operation, request-for-exit and alarm monitoring. Biometric templates and decision-making
capability reside locally, ensuring your doors are always
secure and will continue to operate properly even if all communication to the main access control system is lost.
Base Model
HandKey II
Description
HandKey with base memory for 512 users
Verification Time
≤ 1 second for comparison to reference template
ID Number Length
1 – 10 digits
Duress Code
1 leading digit, user definable
Communication
RS232: Baud rate 300 bps to 28,800 bps
RS422: Baud rate 300 bps to 28,800 bps
RS485: Baud rate 300 bps to 28,800 bps
Optional Modem: Baud rate 300 bps to 14,400 bps
Optional Ethernet: 10 Base T
Template Size
9 bytes
User Memory
512 users expandable to 259,072 users
Inputs
Standard: 26 bit, 9 bit ID Wiegand
Optional: Mag stripe, bar code, smart card
HandKey input: Request to Exit, Door switch
input,
2 auxiliary inputs
Outputs
Door control: Lock output
Card reader emulation mode: Wiegand, mag
stripe, bar code 1 programmable auxiliary
Outputs to peripheral devices: Audible or silent
alarms,door locks, lighting systems
Event Monitoring
Tamper: HandKey opened or removed
ID refused: User not verified after user definable number of tries exceeded
Duress: User entered duress code digit
Power failure: HandKey switched to optional
battery power
Programmable
HandKey Commands
• Add / remove users
• Set global operating thresholds
• Set individual user data (authority or threshold levels, time zones)
• Transmit data from Master to Remote
• Data received by Master from Remote
• Transmit / receive data from optional software
• Check status of door (Tamper, Door monitor
switch)
• Time zones – 62 total (2 fixed, 60 programmable)
• Set language
• Set date format, date and time
• Edit holidays
Antimicrobial
Available on Platen
Blue Hand Outline
Available on Platen
Dimensions HxWxD
11.65 in. x 8.85 in. x 8.55 in.
29.6 cm x 22.5 cm x 21.7 cm
Stand-alone or fully integrated
HandKey readers can be used as a stand-alone unit or as part of an integrated access control system. The units easily integrate into existing systems using the card
reader emulation mode. Or, by using the HandNet software for template
HandKey-II
Door Switch
management, thousands
of units can be linked
together to form a system
that communicates alarms
and transactions in real
time, provides activity,
user and systems reports,
Stand-alone operation lets you
provide security to a single
and allows supervised user
door at an affordable price
enrollment and deletions
at any reader. A variety of
communications options, including dial-up modems and
Ethernet, allow you to design a system that’s right for
your facilities.
In a network
Schlage’s HandNet software links a virtually unlimited number of HandKey units into an integrated door access control system. All alarms and transactions report
back in real time to the central computer, making door
and alarm monitoring easy and efficient. Activity, user
and system reports can be easily generated. The central
computer handles all hand template management allowing supervised enrollment at any reader and system wide deletions. An optional internal modem lets you include remote site operations. Ethernet communication is also available.
PC running HandNet
for Windows
(without options)
System Network
RS-485, Ethernet or Modem
Door Switch
Door
Lock
Power Requirements 12 to 24 VDC or 12 to 24 VAC 50-60 Hz 7 Watts
Door Switch
Door
Lock
Door Switch
Door
Lock
Weight
5.3 lbs. (2.4 kgs.) (Without battery back-up or
wall plate)
Temperature
Operating: 0 deg C to +45 deg C / 32 deg F to
113 deg F
Non-Operating (Storage): -10 deg C to +60 deg
C /14 deg F to 140 deg F
Relative Humidity
Operating: 20% to 80% RH Non-condensing
Non-operating (Storage): 5% to 85% RH Noncondensing
INGERSOLL RAND, the Ingersoll Rand logo, SCHLAGE, the SCHLAGE logo, and HandKey are trademarks
of Ingersoll-Rand plc, its subsidiaries and/or affiliates in the United States and other countries. MIFARE is a
trademark of NXP B.V. HID and iCLASS are trademarks of HID Corporation. Specifications subject to change.
Please check with your system vendor for details. All other trademarks are the property of their respective owners.
877-671-7011 • securitytechnologies.ingersollrand.com
©2012 Ingersoll Rand 004535 11/12
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising