LG | HBM-730 | User's Manual | LG HBM-730 User's Manual

English
Spanish
LG Electronics
BLUETOOTH ® Mono Headset
HBM-730 User manual
P
W
R
All rights reserved.
LG Electronics Inc., 2006
Note : For the best performance and
to prevent any damage to, or misuse of the
HBM - 730, please read all of the information
carefully prior to using the HBM - 730.
Any modifications or changes to this manual due to
typographical errors or inaccuracies of stated information
shall only be made by LG Electronics Inc.
Introduction
Table of Contents
Introduction
Part Description
How to use
- Change direction
- Attaching Lanyard
- Charging
- Low battery
- Power on
- Power off
- Pairing
- Auto Reconnect
- Volume control
- Calling
�Answering a call
�Making a call
�Voice dialing
�Last number redial
�Ending a call
�Transferring a call
�Call waiting
�Call Reject
Summary of button functions
LED indication
Troubleshooting
Specification
Precautions
Declaration of confirmation
Additional information
Limited warranty
2
3
4
5
5
5
6
6
6
6
6
7
7
7
7
8
8
8
8
8
8
8
9
9
10
10
11
13
13
16
The LG Bluetooth® Headset HBM - 730 is a light weight wireless
Headset utilizing Bluetooth® technology. This product can be used as
an audio accessory for devices supporting either the Headset or
Handsfree Bluetooth® Profiles.
Included in package
Bluetooth® Headset
User manual
Earbud cover
Lanyard
Charger
Warranty Card
3
Part Description
How to use
Change direction
Front
Earloop
Lanyard Hook
+
LED indicator
Power / End Button
_
Volume UP / Down Button
On the left
Back
Rotation
On the right
Attaching Lanyard
Speaker
R
W
P
W
R
P
P W R
MIC
Charging Port
4
Hook the clip of the lanyard
to the bar of the Headset.
5
How to use
Charging
- Remove the cover on the charging port and connect the charger.
- When the charger is connected, with power on or off, the Headset
will turn off. While charging, the LED indicator will show a solid red light.
- The buttons will not function while the device is charging.
- It takes 2 hours to fully charge the Headset.
- When charging is complete, the LED indicator will turn off.
Low battery
- A low battery tone will play once every 30 seconds.
- When the battery is not charged, the Headset will turn off.
Power on
- Press and hold the PWR/END button for 2 seconds.
�The power will turn on and a booting tone will play.
Power off
- Press and hold the PWR/END button for 5 seconds.
� A shutdown tone will play, the Bluetooth link will disconnect,
and the power will turn off.
Pairing
- Prior to using the Headset for the first time, you must pair it
with a Bluetooth- enabled handset.
- With the HBM - 730 off, press and hold the PWR/END button for 5 seconds.
� You will hear a pairing tone and the LED indicator will stay red,
when the device enters Pairing Mode.
▶Using your handset, find the Bluetooth Menu and “search for” or
“add” new devices.
▶Select “LG HBM - 730” from the list of devices and pair it with your handset.
�When asked for the Pass/PIN code during the pairing procedure,
please enter “0000” (4 Zeros).
� Once pairing has completed successfully, you will hear a beep.
6
How to use
�After pairing successfully, be sure to “Connect” to the LG HBM - 730.
▶If you want to pair with other devices in the future, the Headset
must be placed in Pairing Mode.
�If it will be not connected the “Pairing” for three minutes, the
Headset will turn off automatically.
Auto Reconnect
- When the HBM - 730 turns off accidentally or intentionally during
connected condition, the headset and handset will disconnect.
The Headset and handset will automatically reconnect without
pairing when the HBM - 730 turns on.
[ Out of range ]
- When the HBM - 730 and your handset are separated by a distance
of 33 feet (10 meters) or more, the Headset and handset will
disconnect. When the handset and HBM - 730 are brought back
within the required distance, the HBM - 730 will automatically
reconnect with the handset.
- If the Headset and handset do not automatically reconnect when they
are back within the required range, briefly press the PWR/END
button to reconnect manually.
Volume control
- Press the VOLUME UP or VOLUME DOWN button to adjust the
speaker volume.
- There are eight levels of speaker volume.
Calling
Answering a call
- When there is an incoming call, the Headset will ring.
- Briefly press the PWR/END button to answer an incoming call.
7
How to use
Making a call
- If you make a call from the handset, the call will (subject to phone settings)
automatically transfer to the Headset. If the call is not automatically
transferred, you can manually transfer the call by briefly pressing the
PWR/END button on the HBM - 730 (handset and headset must be paired).
Voice dialing*
- Briefly press the PWR/END button to activate “Voice Command”.
You will get the best results if you record the voice dialing tag through
your Headset.
Last number redial*
- Press and hold the PWR/END button for 1second to activate “Last
Number Redial”. The headset will beep, and call the last number dialed.
Ending a call
- Briefly press the PWR/END button.
Transferring a call*
- While on a call on your handset, briefly press the PWR/END button
to transfer the audio to the Headset.(headset and handset must be paired).
Summary of button functions
HBM-730
Status
Function
Action
Power on
Power off
Power off
Power on
Press the PWR/END button for 2seconds.
Press the PWR/END button for at least
5seconds.
Briefly press the Volume Up button.
Briefly press the Volume Down button.
- Handset to Headset
Briefly press the PWR/END button
- Headset to Handset
Press and hold the VOLUME UP button for 5 seconds.
Briefly press the PWR/END button.
Briefly press the PWR/END button.
Press the PWR/END button for 1second.
Press the PWR/END button for 1second.
Briefly press the PWR/END button.
Volume up
Volume down
Transferring a call
Talking
Answering a call
Ending a call
Call waiting
Last number redialing
Voice dialing
(handset must support)
Pairing mode
Call reject
Ringing
Talking
Talking
Idle
Start & stop
voice command
Power off
Press the PWR/END button for 5 seconds.
Ringing
Press the PWR/END button for 1second.
LED indication
- And to transfer a call from the Headset to Handset, press and hold
VOLUME UP button for 5seconds.
Call waiting*
- Answer a second call without hanging up the first call by pressing the
PWR/END button for 1second. Press the PWR/END button for
1second to return to the original call.
Function
Operating
Pairing mode
Headset / handsfree
Profile connected
Call connected
- Briefly press the PWR/END button to terminate both calls at once.
Call Reject*
- Activate Call Reject by pressing the PWR/END button for 1second
when the handset rings.
* It is possible to use these functions only when your handset supports them.
For further information about using these features, please consult your
handset's user manual.
8
HBM-730
Status
Power on
Power off
Charging
Charging
Charging complete
Action
The red LED light flickers 4 times.
The red LED light flickers 4 times and
then turns off.
The red LED light is lit.
The red LED light flickers
2 times every 5 seconds.
The red LED light flickers
2 times every 5 seconds.
The red LED is lit.
LED is turned off.
9
Troubleshooting
Precautions
Does not turn on
+
Determine whether your handset
supports the Headset,
or Handsfree profiles.
Charge the battery.
Press and hold the PWR/END
button for at least 2 seconds to
turn on the Headset
With the power off, press and
hold the PWR/END button for
5 seconds to place the Headset
in pairing mode.
Check the speaker volume. lncrease the volume level.
Do not drop the unit from high places.
+
Do not modify, repair, or take apart.
+
_
Do not expose directly to water,
alcohol, benzene, etc. for cleaning.
_
Low sound (speaker)
Charge the battery.
_
Check whether the battery
of the HBM - 730 is fully
charged.
Unable to communicate Check whether the handset
with the LG Bluetooth® supports the Headset or
Headset HBM - 730
Handsfree profiles.
Check whether the battery
of the HBM - 730 is low.
Unable to pair the
Check and make sure the
HBM - 730 with the
Headset is on.
Bluetooth® device
Check and make sure the
Headset is placed in pairing
mode.
Specification
V1.2 (Handsfree / Headset profiles)
3.7V, L i - Polymer
Up to 150Hrs
Up to 4Hrs
< 2Hrs
-10℃ ~ 60℃
20.2mm(W) X 42.2mm(L) X 10.2mm(H) / 9.4g
+
Do not expose directly to flammables.
Do not place or keep the unit near
flammables.
+
Description
Bluetooth specification
Battery
Stand by time
Talk Time
Charging time
Operation temperature
Dimension / weight (without necklace)
_
ITEM
_
10
1 1
Declaration of Confirmation
Precautions
FCC NOTICE TO USERS :
Keep unit away from humidity & dust.
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
+
_
Do not place the heavy objects on the unit.
� Changes or modifications not expressly
approved by the party responsible for
compliance could void the user's authority to
operate the equipment.
� There is a risk of explosion if the battery is
replaced by an incorrect type.
� Dispose of used batteries according to the
instructions.
� The earloop is made of a durable plastic that
does not break but bend. However,
repetition of bending is not recommended.
+
IMPORTANT NOTE :
_
To comply with the FCC RF exposure compliance requirements, no change to
the antenna or the device is permitted. Any change to the antenna or the
device could result in the device exceeding the RF exposure requirements
and void user's authority to operate the device.
Additional Information
1. Radio frequency exposure
This Bluetooth® Headset, HBM - 730, is a radio transmitter and receiver.
When in operation, it communicates with a Bluetooth® equipped mobile
device by receiving and transmitting radio frequency (RF)
electromagnetic fields (microwaves) in the frequency range 2.4 to
2.4835 GHz. The output power of the radio transmitter is low, 0.001
watt. Your Bluetooth® Headset is designed to operate in compliance with
the RF exposure guidelines and limits set by national authorities and
international health agencies when used any compatible LG Electronics
mobile phone.
2. Potentially explosive atmosphere
Turn off your electronic device when in any area with a potentially
explosive atmosphere. It is rare, but your electronic device could
generate sparks. Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death. Areas with a potentially
explosive atmosphere are often, but not always, clearly marked.
12
13
Additional Information
Additional Information
3.Emergency calls
IMPORTANT!
This Bluetooth® Headset and the electronic device connected to the
Headset operate using radio signals, cellular and landline networks
as well as user - programmed functions, which cannot guarantee
connection under all conditions.
Therefore you should never rely solely upon any electronic device for
essential communications (e.g. medical emergencies). Remember, in
order to make or receive calls, the Headset and the electronic device
connected to the Headset must be switched on and in a service area
with adequate cellular signal strength. Emergency calls may not be
possible on all cellular phone networks or when certain network
services and/or phone features are in use. Check with your local
service provider.
7. Conditions
- The warranty is valid only if the original receipt issued to the original
purchaser by the dealer, specifying the date of purchase and serial
number, is presented with the product to be repaired or replaced.
LG Electronics reserves the right to refuse warranty service if this
information has been removed or changed after the original purchase
of the product from the dealer.
4. Battery information
A rechargeable battery has a long service life if treated properly.
A new battery or one that has not been used for a long period of time
could have reduced capacity the first few times it is used.
Do not expose the battery to extreme temperatures, never above
+ 60。(+140。
F) or under -20。(-4。
F). For maximum battery capacity,
use the battery in room temperature. If the battery is used in low
temperatures, the battery capacity will be reduced.
The battery can only be charged in temperatures between + 10。(+50。F)
and + 45。(+ 113。F).
- This Warranty does not cover any failure of the product due to
normal wear and tear, or due to misuse, including but not limited to
use in other than the normal and customary manner, in accordance
with instructions for use and maintenance of the product. Nor does
this warranty cover any failure of the product due to accident,
modification or adjustment, acts of God or damage resulting from
liquid.
5. Recycling the battery in your Bluetooth® Headset
The battery in your Bluetooth® Headset must be disposed of properly
and should never be placed in municipal waste. The LG Electronics
service partner removing battery will dispose of it according to local
regulations.
6. Safety of the lanyard
The lanyard of the Headset can be dangerous when the lanyard is
worn and hooked by some objects. To prevent any potential of
danger, the lanyard is designed to break when a mass of more than
5Kg is applied.
14
- If LG Electronics repairs or replaces the product, the repaired or
replaced product shall be warranted for the remaining time of the
original warranty period or for ninety (90) days from the date of
repair, whichever is longer. Repair or replacement may involve the
use of functionally equivalent reconditioned units. Replaced parts or
components will become the property of LG Electronics.
- This warranty does not cover product failures due to improper
repair installations, modifications or service performed by a non- LG
Electronics authorized person. Tampering with any of the seals on
the product will void the warranty.
- THERE ARE NO EXPRESS WARRANTIES, WHETHER WRITTEN OR ORAL,
OTHER THAN THIS PRINTED INCLUDING WITHOUT LIMITATION THE
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED
WARRANTY. IN NO EVENT SHALL LG ELECTRONICS OR ITS VENDORS BE
LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY
NATURE WHATSOEVER, INCLUDING BUT NOT LIMITED TO LOST PROFITS
OR COMMERCIAL LOSS, TO THE FULL EXTENT THOSE DAMAGES CAN
BE DISCLAIMED BY LAW.
15
Additional Information
�Some countries/states do not allow the exclusion or limitation of
incidental or consequential damages, or limitation of the duration of
implied warranties, so the preceding limitations or exclusions may
not apply to you. The warranty provided does not affect the
consumer's statutory rights under applicable national legislation in
force, nor the consumer's rights against the dealer arising from their
sales/purchase contract.
Limited Warranty
Subject to the conditions of this Limited Warranty, LG Electronics
warrants this product to be free from defects in design, material and
workmanship at the time of its original purchase by a consumer,
and for a subsequent period of one (1) year. Should your product
need warranty service, please return it to the dealer from whom it
was purchased or contact your local LG Electronics contact center to
get further information.
16
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising