LG Helix LW310 User guide

Add to my manuals
69 Pages

advertisement

LG Helix LW310 User guide | Manualzz

Please visit LG's website or mycricket.com for the User Guide fully illustrated on how to use your phone.

Copyright ©2009 LG Electronics, Inc. All rights

reserved. LG and the LG logo are registered trademarks of LG Group and its related entities. All other trademarks are the property of their respective owners.

Important Safety Precautions

Read these instructions. Breaking the rules may be dangerous or illegal. Further detailed information is given in this user guide.

1. Never use an unapproved battery since this could damage the phone and/or battery and could cause the battery to explode.

2. Never place your phone in a microwave oven as it will cause the battery to explode.

3. Never store your phone in temperatures less than

-4°F or greater than 122°F.

4. Do not dispose of your battery by fire or with hazardous or flammable materials.

5. When riding in a car, do not leave your phone or set up the hands-free kit near to the air bag. If wireless equipment is improperly installed and the air bag is deployed, you may be seriously injured.

6. Do not use a hand-held phone while driving.

7. Do not use the phone in areas where its use is prohibited. (For example: aircraft)

1

2

Important Safety Precautions

1. Do not expose the battery charger or adapter to direct sunlight or use it in places with high humidity, such as a bathroom.

2. Do not use harsh chemicals (such as alcohol, benzene, thinners, etc.) or detergents to clean your phone. This could cause a fire.

3. Do not drop, strike, or shake your phone severely. It may harm the internal circuit boards of the phone.

4. Do not use your phone in high explosive areas as the phone may generate sparks.

5. Do not damage the power cord by bending, twisting, pulling, or heating. Do not use the plug if it is loose as it may cause a fire or electric shock.

6. Do not place any heavy items on the power cord. Do not allow the power cord to be crimped as it may cause electric shock or fire.

7. Do not handle the phone with wet hands while it is being charged. It may cause an electric shock or seriously damage your phone.

8. Do not disassemble the phone.

1. Do not place or answer calls while charging the phone as it may short-circuit the phone and/or cause electric shock or fire.

2. Do not hold or let the antenna come in contact with your body during a call.

3. Make sure that no sharp-edged items such as animal’s teeth or nails, come into contact with the battery. This could cause a fire.

4. Store the battery out of reach of children.

5. Be careful that children do not swallow any parts (such as rubber plugs, earphone, connection parts of the phone, etc.)

This could cause asphyxiation or suffocation resulting in serious injury or death.

6. Unplug the power cord and charger during lightning storms to avoid electric shock or fire.

7. Only use the batteries and chargers provided by LG. The warranty will not be applied to products provided by other suppliers.

8. Only authorized personnel should service the phone and its accessories. Faulty installation or service may result in accidents and consequently invalidate the warranty.

9. Your service provider programs one or more emergency phone numbers, such as 911, that you can call under any circumstances, even when your phone is locked. Your phone’s preprogrammed emergency number(s) may not work in all locations, and sometimes an emergency call cannot be placed due to network, environmental, or interference issues.

3

4

Table of Contents

Important Safety

Precautions

Table of Contents

Welcome 7

Technical Details 8

Important Information 8

FCC Part 15 Class B Compliance 8

Technical Details

FCC RF Exposure Information

8

10

Bodily Contact During Operation 10

Vehicle-Mounted the External

Antenna

FCC Notice and Cautions

Caution

11

11

12

Part 15.19 statement

Part 15.21 statement

Part 15.105 statement

12

12

13

Phone Overview 18

1

4

Getting Started with Your

Phone 19

The Battery

Installing the Battery

Removing the Battery

Charging the Battery

Battery Charge Level

Mute Function

Multimedia

1. Take Photo

Browser

1. Start Browser

Settings

Game & Apps

1. Game & Apps

Tools

1. Bluetooth®

1.1 Paired Devices

24

25

25

25

25

20

20

20

19

19

19

21

21

22

22

24

1.2 Power

1.3 Auto Pair Handsfree

1.4 My Visibility

1.5 My Bluetooth Name

1.6 My Bluetooth Info

Voice Command

1. Launch 28

1.1 Start Command 28

1.1.1 Call <Name> or <Number> 28

1.1.2 Voicemail

1.1.3 Missed Calls

1.1.4 Messages

1.1.5 Time & Date

1.1.6 Help

28

28

28

29

29

1.2 Command Mode

1.3 Announce Alert

1.4 Train Word

1.5 Best Match

29

29

29

30

Settings 30

1. Memory

26

26

27

27

27

27

30

2. Phone Info 30

Safety 31

TIA Safety Information

Exposure to Radio Frequency

Signal

31

Antenna Care

Phone Operation

Tips on Efficient Operation

Driving

Electronic Devices

Pacemakers

Persons with pacemakers:

Hearing Aids

Other Medical Devices

Health Care Facilities

Vehicles

Posted Facilities

Aircraft

Blasting Areas

Potentially Explosive Atmosphere 34

For Vehicles Equipped with an

Air Bag 35

34

34

34

34

32

32

32

33

31

31

32

33

33

33

34

5

6

Table of Contents

Safety Information

Charger and Adapter Safety

35

36

Battery Information and Care 37

Explosion, Shock, and Fire Hazards38

38 General Notice

Warning! Important safety information 40

Avoiding hearing damage

Using your phone safely

Avoiding hearing damage

Using headsets safely

FDA Consumer Update

10 Driver Safety Tips

Consumer Information on

SAR 55

FCC Hearing-Aid Compatibility

(HAC) Regulations for Wireless

Devices 58

41

41

52

40

40

41

Limited Warranty

Statement 62

Index 66

Thank you for choosing the

LW310 cellular phone designed to operate with the latest digital mobile communication technology, Code Division

Multiple Access (CDMA). Along with the many advanced features of the CDMA system, such as greatly enhanced voice clarity, this compact phone offers:

Significantly enhanced voice clarity.

Slim and sleek design with internal antenna (Internal antenna described as antenna throughout this user guide).

Large, easy-to-read, 9-line backlit LCD with status icons.

Paging, messaging, voice mail, and caller ID.

23-key keypad.

Welcome

Speakerphone feature.

Menu-driven interface with prompts for easy operation and configuration.

Any key answer, auto answer, auto retry, one-touch and speed dialing with 99 memory locations.

Bilingual (English and Spanish) capabilities.

Bluetooth ® wireless technology.

Note

The Bluetooth ® word mark and logos are owned by the Bluetooth

SIG, Inc. and any use of such marks by LG Electronics is under license.

Other trademarks and trade names are those of their respective owners.

7

8

Technical Details

Important Information

This user’s guide provides important information on the use and operation of your phone.

Please read all the information carefully prior to using the phone for the best performance and to prevent any damage to or misuse of the phone. Any unapproved changes or modifications will void your warranty.

FCC Part 15 Class B

Compliance

This device and its accessories comply with part 15 of FCC rules.

Operation is subject to the following two conditions: (1) This device and its accessories may not cause harmful interference, and

(2) this device and its accessories must accept any interference received, including interference that causes undesired operation.

Technical Details

The LW310 is a trimode phone that operates on among (Code

Division Multiple Access CDMA) frequencies: cellular services a

800 MHz, (Personal

Communication Services PCS) at

1.9 GHz and AWS (Advanced

Wireless Services).

CDMA technology uses a feature called DSSS (Direct Sequence

Spread Spectrum) that enables the phone to keep communication from being crossed and to use one frequency channel by multiple users in the same specific area.

This results in a 10-fold capacity increase when compared with analog mode. In addition, features such as soft / softer handoff, hard handoff, and dynamic RF power control technologies combine to reduce call interruptions.

The Cellular and PCS CDMA

networks consist of MSO (Mobile

Switching Office), BSC (Base

Station Controller), BTS (Base

Station Transmission System), MS

(Mobile Station) and AWS

(Advanced Wireless Services).

CDMA Standard

Basic Air

Interface

Designator

TIA/EIA-95A

TSB-74

ANSI J-STD-008

TIA/EIA-IS2000

ANSI TIA/EIA 553A

Description

CDMA Dual Mode Air Interface

14.4kbps radio link protocol and interband operations

IS-95 adapted for PCS frequency band cdma2000 1xRTT AirInterface

Network

Service

TIA/EIA/IS-634

TIA/EIA/IS/651

TIA/EIA/IS-41-C

TIA/EIA/IS-124

MAS-BS

PCSC-RS

Intersystem operations

Non-signaling data comm.

TIA/EIA/IS-96-B

TIA/EIA/IS-637

TIA/EIA/IS-657

IS-801

TIA/EIA/IS-707-A

Speech CODEC

Short message service

Packet Data

Position Determination

Service (gpsOne)

High Speed Packet Data

Performance

TIA/EIA/IS-97

TIA/EIA/IS-98

ANSI J-STD-018

ANSI J-STD-019

TIA/EIA/IS-125

Cellular base station

Cellular mobile station

PCS personal station

PCS base station

Speech CODEC

9

10

Technical Details

* TSB-74: Protocol between an

IS-95A system and ANSI J-

STD-008

1xRTT system receives twice as many subscribers in the wireless section as IS-95. Its battery life is twice as long as IS-95. Highspeed data transmission is also possible.

The following table lists some major CDMA standards.

FCC RF Exposure Information

WARNING! Read this information before operating the phone.

In August 1996, the Federal

Communications Commission

(FCC) of the United States, with its action in Report and Order

FCC 96-326, adopted an updated safety standard for human exposure to Radio

Frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both

U.S. and international standards bodies. The design of this phone complies with the FCC guidelines and these international standards.

Bodily Contact During

Operation

This device was tested for typical use with the back of the phone kept 0.79 inches (2.0 cm) from the body. To comply with FCC

RF exposure requirements, a minimum separation distance of

0.79 inches (2.0 cm) must be maintained between the user’s body and the back of the phone, including the antenna, whether extended or retracted. Thirdparty belt-clips, holsters, and similar accessories containing

metallic components should not be used. Avoid the use of accessories that cannot maintain

0.79 inches (2.0 cm) distance between the user’s body and the back of the phone and have not been tested for compliance with

FCC RF exposure limits.

Vehicle-Mounted the External

Antenna

(Optional, if available.)

To satisfy FCC RF exposure requirements, keep 8 inches (20 cm) between the user / bystander and vehicle-mounted the external antenna. For more information about RF exposure, visit the FCC website at www.fcc.gov.

FCC Notice and Cautions

This device and its accessories comply with part 15 of FCC rules. Operation is subject to the following two conditions: (1)

This device and its accessories may not cause harmful interference, and (2) this device and its accessories must accept any interference received, including interference that causes undesired operation.

Any changes or modifications not expressly approved in this user guide could void your warranty for this equipment. Use only the supplied antenna. Use of unauthorized antennas (or modifications to the antenna) could impair call quality, damage the phone, void your warranty and/or violate FCC regulations.

Don't use the phone with a damaged antenna. A damaged antenna could cause a minor skin burn. Contact your local dealer for a replacement antenna.

11

12

Technical Details

Caution

Use only the supplied and approved antenna. Use of unauthorized antennas or modifications could impair call quality, damage the phone, void your warranty and/or result in violation of FCC regulations. Do not use the phone with a damaged antenna. If a damaged antenna comes into contact with the skin a minor burn may result.

Contact your local dealer for a replacement antenna.

Part 15.19 statement

This device and its accessories comply with part15 of FCC rules.

Operation is subject to the following two conditions:

(1) This device & its accessories may not cause harmful interference.

(2) This device & its accessories must accept any interference received, including interference that may cause undesired operation.

Part 15.21 statement

Change or Modifications that are not expressly approved by the manufacturer could void the user's authority to operate the equipment.

Part 15.105 statement

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. if this equipment does cause harmful interference or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

13

14

Phone Overview

1.

Earpiece

Lets you hear the caller.

2.

LCD Screen

Displays messages and indicator icons. When the phone is turned on, Power

Save mode automatically dims the screen and then darkens it if no keys are pressed.

3.

Settings

Use to access Settings menu.

4.

Speakerphone Key

Use to turn Speaker On or

Off.

5.

TALK Key

Use to place or answer calls.

6.

Alphanumeric Keypad

Use to enter numbers and characters and select menu items.

7. Vibrate Mode Key

Use to set the vibration mode from standby mode, press and hold for about 3 seconds.

8.

Navigation Key

Use for quick access to

Messaging, Multimedia, Browser or Games & apps.

9. Right Soft Key

Use to access Contacts.

10. Menu/OK Key

Press to select the options of the menus in your phone.

11. Start Command

Use to access Start

Command.

12. PWR/END Key

Use to turn the power on/off and to end a call. Also returns to the main menu display screen.

13. BACK Key

Deletes single spaces or characters with a quick press, but press and hold to delete entire words. Will also back you out of menus, one level at a time.

14. Lock Mode Key

Use to lock the phone from standby mode, press and hold for about 3 seconds.

1.

Earphone Jack

Allows the use of a headset to hear caller's voice.

2.

Side Keys

Use to adjust the ringer volume in standby mode and the earpiece volume during a call.

3.

Charger Port

Connects the phone to the battery charger or other available accessories.

4.

Side Camera Key

Use for quick access to Camera function.

Charging with PC USB

You can use your computer to charge your phone. Connect one end of a USB cable to the charging accessory port on your phone and the other end to a highpower USB port on your PC (commonly located on the front panel of the computer). When charging with

Hub, charge the phone with Hub Power.

Note

To charge the phone with PC USB, USB driver should be installed in advance. LG USB Driver supports Windows98SE, ME, 2000, XP and

Vista. Driver can be downloadable from your service provider's website.

5.

Camera Lens lets you take pictures and videos.

6.

Speaker lets you hear the different ringers and sounds.

15

16

Menus Overview

Recent Calls

1. Missed Calls

2. Received Calls

3. Dialed Calls

4. All Calls

5. Call Timer

6. Data Counter

Messaging

1. New Text Message

2. New Picture

Message

3. Inbox

4. Sent

5. Drafts

6. Voicemail

7. Templates

8. Settings

1. All Messages

2. Text Message

3. Picture Message

4. Edit Voicemail#

9. Delete All

1. Delete Inbox

2. Delete Sent

3. Delete Drafts

4. Delete All

Messages

4. Audios

5. Shuffle

Browser

1. Start Browser

Game & Apps

1. Games & Apps

Contacts

1. New Contact

2. Contact List

3. Groups

4. Speed Dials

5. My Name Card

Multimedia

1. Take Photo

2. Record Voice

3. Images

Tools

1. Bluetooth

1. Paired Devices

2. Power

3. Auto Pair

Handsfree

4. My Visibility

5. My Bluetooth

Name

6. My Bluetooth

Info

2. My Menu

3. Alarm Clock

4. Calendar

5. Ez Tip Calc

6. Notepad

7. Calculator

8. World Clock

9. Stopwatch

0. Unit Converter

Voice Command

1. Launch

1. Start Command

2. Command Mode

3. Announce Alert

4. Train Word

5. Best Match

Settings

1. Sound

1. Ringers

2. Volume

3. Message Alerts

4. Alert Type

5. Service Alerts

6. Power On/Off

Tone

7. Flip Tone

2. Display

1. Wallpaper

2. Banner

3. Backlight

4. Menu Style

5. Languages

6. Clocks &

Calendar

1. Main Screen

2. Front Screen

7. Font Settings

8. Phone Dial

Search

3. Security

1. Lock Phone

2. Restrictions

3. Emergency #s

4. Change Lock

Code

5. Reset Default

4. Call Settings

1. Answer Options

2. Auto Retry

3. One-Touch Dial

4. Voice Clarity

5. Airplane Mode

6. TTY Mode

5. System

1. Network

2. Location

17

18

Phone Overview

6. Memory

1. Reserved

Memory

2. Multimedia

7. Phone Info.

1. My Number

2. ESN/MEID

3. Icon Glossary

4. Version

5. Warranty Data

Code

6. Refurbish

Menu Access

Press

Menu to access nine phone menus. There are two methods of accessing menus and submenus:

Use the navigation key to highlight and select, or

Press the number key that corresponds with the menu (or submenu).

Getting Started with Your Phone

The Battery

Note

It is important to fully charge the battery before initial use of the phone.

The phone comes with a rechargeable battery. Keep the battery charged while not in use in order to maximize talk and standby time. The battery charge level is shown at the top of the

LCD screen.

Installing the Battery

Remove the battery cover by sliding it downward followed by the arrow indicator. Align the battery with the terminals near the top of the phone. Align the battery cover then slide it upward side until it clicks into place.

Removing the Battery

Turn the phone off. Slide the battery cover to upward and remove it. Use the opening near the bottom of the battery to lift the battery out.

19

20

Getting Started with Your Phone

Charging the Battery

To use the charger provided with your phone:

Warning! Use only the charger provided with the phone. Using any charger other than the one included with the LW310 may damage your phone or battery.

Notice

Please make sure that the 'B' Side faces up before inserting a charger or data cable into the charger port of your phone.

1. Plug the end of the adapter into the phone’s charger port and the other end into an electrical outlet.

2. The charge time varies depending upon the battery level.

Battery Charge Level

The battery charge level is shown at the top right of the LCD screen. When the battery charge level becomes low, the low battery sensor alerts you in three ways: sounding an audible tone, blinking the battery icon, and displaying a warning message. If the battery charge level becomes exceedingly low, the phone automatically switches off and any function in progress is not saved.

Mute Function

The Mute Function is used during a phone call. To quickly activate Mute press Left Soft Key

Mute, then to cancel press Left Soft Key

Unmute.

Multimedia

View, take, and trade your digital pictures right from your wireless phone.

1. Take Photo

1. Press , , .

2. Set the brightness , zoom and press Right Soft Key

Options to change other settings.

Use to highlight an option and press .

View Mode Fit to Screen/

Landscape

Resolution 1280X960/

640X480

/ 320X240/

176X144

/ 160X120

Quality Fine

/ Normal/ Economy

Zoom

Brightness

Night Mode On

/ Off

Multimedia

Self Timer Off/ 3 Seconds/

5 Seconds/ 10 Seconds

White Balance Auto/ Sunny/

Cloudy/ Tungsten/ Fluorescent

Color Effects Color, Sepia,

Mono, Negative

Template On/ Off

Shutter Sound None/ Sound

1/ Sound 2/ Sound 3/ Say

Cheese

Multishot Off/ 3 shots/ 6 shots

Auto-Save Enable/ Disable

3. Take a picture by pressing .

4. Press Right Soft Key

Delete

,

Send

, or Left Soft Key

Save

.

Choose from the following save options:

Save

Set As

1. Main Screen

2. Front Screen

3. Picture ID

The picture is stored in

Gallery

.

21

22

Browser

Browser

The Web feature allows you to view Internet content. Access and selections within this feature are dependent upon your service provider. For specific information on Web access through your phone, contact your service provider.

1. Start Browser

Allows you to initiate an Web session.

1. Press , .

2. After a few seconds, you will see the home page.

Ending an Web Session

End an Web session by pressing

.

Navigating Through the

Browser

On-screen items may be presented in one of the following ways:

Numbered options

You can use your numeric keypad or you can select the items by moving the cursor and pressing the appropriate

Soft Key(s).

Links embedded in content

You can act on the options or the links by using the Soft

Keys at the bottom of the display screen.

Text or numbers

You can select the items by moving the cursor and pressing the appropriate Soft

Keys.

Scrolling

Use to scroll through the content if the current page does not fit on one screen. The currently selected item is indicated by a cursor on the screen.

Fast Scrolling

Press and hold to quickly move the cursor up and down on the current screen.

Scrolling by Page

Press the Side Keys to move or down one page at a time.

Soft Keys

To navigate to different screens or select special functions, use the

Soft Keys. The function associated with the Soft Keys can change for each page and depends on each highlighted item.

Left Soft Key

Left Soft Key is used primarily for first options or selecting an item but its function may change, depending on the content displayed.

Right Soft Key

Right Soft Key is used primarily for secondary options or a menu of secondary options.

Entering Text, Numbers, or

Symbols

When prompted to enter text, the current text entry method appears above the Right Soft abc, Sym, 123, etc

.

To change the input mode, press change to upper case, press

.

23

24

Browser

Clearing Out Text/Number

Entered

When entering text or numbers, press to clear the last number, letter, or symbol. Press and hold to clear the input field completely.

Initiating a Phone Call From

Mobile Web

You can make a phone call from

Mobile Web if the site you are using supports the feature.

The browser connection is terminated when you initiate the call. After you end the call, your phone returns to the screen from which you initiated the call.

Settings

You can customize some of the web browser settings.

1. Press , .

2. Once the browser is finished loading, press the Right Soft

Key

Menu

.

3. Scroll down to option 13

Settings and press to select it.

The following settings options will be available:

Homepage/ Downloads/

Restart Browser/ Scroll Mode/

Send Referrer/ Key Press

Timeout/ Connection Timeout

Game & Apps

1. Game & Apps

Allows you to download games ad applications. Choose the software you want from the list displayed on the screen.

1. Press , .

2. Select the application or open shop to browse and download apps.

Tools

1. Bluetooth

®

The LW310 is compatible with devices that support the

Bluetooth ® headset and handsfree profile(s). You may create and store 20 pairings within the

LW310 and connect to one device at a time. The approximate

Game & Apps/ Tools communication range for

Bluetooth ® wireless technology is up to 30 feet (10 meters).

Bluetooth QD ID B015228

Note

Read user guide of each Bluetooth ® accessory that you are trying to pair with your phone because the instructions may be different.

Note

The Bluetooth ® features available on this handset may not be compatible with all Bluetooth ® enabled devices.

Your service provider or handset manufacturer cannot be held responsible for compatibility issues with devices not sold by the service provider or handset manufacturer.

1.1 Paired Devices

Pairing is the process that allows the handset to locate, establish

25

26

Tools and register 1-to-1 connection with the target device.

For pairing new Bluetooth

®

device

1. Press , , , .

2. Follow the Bluetooth ® accessory instructions to set the device to pairing mode.

3. Press Left Soft Key Search.

4. If Bluetooth ® power is set to off, you will be prompted to turn power on. Highlight

Yes and press .

5. The device will appear in the

Add New Device menu once it has been located. Highlight the device and press .

6. The handset will prompt you for the passkey. Consult the

Bluetooth ® accessory instructions for the appropriate passkey (typically

“0000” - 4 zeroes). Enter the passkey and press .

7. Once pairing is successful, select

Yes and press to connect with the device.

8. Once connected, you will see the device listed in the Paired

Devices menu.

1.2 Power

Allows you to set the power On/Off.

1. Press , , , .

2. Use to select a setting, then press .

On / Off

Note

By default, your device’s Bluetooth ® functionality is turned off.

1.3 Auto Pair Handsfree

1. Press , , , .

2. Use to select a setting, then press .

On / Off

1.4 My Visibility

Allows you to set the visibility of your Bluetooth ® device.

1. Press , , , .

2. Use to select a setting, then press .

Visible

/

Hidden

Note

If you turn on My Visibility, your device is able to be searched by other in-range Bluetooth ® devices.

1.5 My Bluetooth Name

Allows you to edit the name of the Bluetooth ® device.

1. Press , , , .

2. Hold down existing name.

to clear the

3. Use the alphanumeric keypad to enter a new alias.

4. Press to save and exit, or

Right Soft Key

Cancel to cancel editing.

1.6 My Bluetooth Info

Allows you to view the information of the Bluetooth ® .

1. Press , , , .

27

28

Voice Command

Voice Command

Allows you to make phone calls quickly and easily by voice. Your phone recalls the number from your Contacts, displays it briefly, and then dials it. This menu also includes a feature for those who are driving or blind. It delivers time information by voice and allows you to check missed calls, messages and voicemails.

1. Launch

1.1 Start Command

1. Press , , .

-Or-

While in Standby mode, press the Voice Command Key .

1.1.1 Call <Name> or

<Number>

1. Press , , , .

-Or-

Press and say "Call".

2. Say the Contact name (and phone type, if applicable) or say the phone number.

1.1.2 Voicemail

1. Press , , ,

-Or-

.

Press and say "Voicemail".

1.1.3 Missed Calls

1. Press , , ,

-Or-

Press and say "Missed

Calls".

2. The handset wil prompt you to dial each number. Say

Yes or

No to proceed.

.

1.1.4 Messages

1. Press , , ,

-Or-

.

Press and say "Messages".

1.1.5 Time & Date

1. Press , , ,

-Or-

Press and say "Time &

Date".

.

1.1.6 Help

Allows you to check the information of Voice Control.

1. Press ,

-Or-

, ,

Press and say "Help".

1.2 Command Mode

Allows you to set command mode to Normal or Speed (The

.

Speed setting allows you to access and use the Voice

Command functions more quickly with a faster non-verbal prompt).

1. Press , , .

2. Select options.

Normal/ Speed

1.3 Announce Alert

Allows you to customize

Announce Alert. Announce Alert lets your hear more information about an incoming call or message instead of, or along with, your ringtone.

1. Press , , .

2. Select options.

Disable/ Announce/

Announce + Ring

29

30

Settings

1.4 Train Word

Allows your to train words for improved Voice Command responses.

1. Press , , .

2. Select options.

Voice Command/ Answer/

Digit Dial

1.5 Best Match

Allows you to choose whether the phone displays the 4 closest matches, or only the closest match, when using the Voice

Command Call (Name or

Number) function.

1. Press , , .

2. Select options.

1 Match/ 4 Matches

Settings

1. Memory

Allows you to check out the memory status of your phone.

1. Press , , .

Reserved Memory/

Multimedia

, and press .

2. Phone Info

The Phone Info menu provides you with specific information pertaining to your phone model.

1. Press , , .

2. Use to highlight an press the corresponding number key.

My Number / ESN/MEID/ Icon

Glossary/ Version/ Warranty

Data Code/ Refurbish

TIA Safety Information

The following is the complete

TIA Safety Information for wireless handheld phones.

Exposure to Radio Frequency

Signal

Your wireless handheld portable phone is a low power radio transmitter and receiver. When

ON, it receives and sends out

Radio Frequency (RF) signals.

In August, 1996, the Federal

Communications Commissions

(FCC) adopted RF exposure guidelines with safety levels for handheld wireless phones. Those guidelines are consistent with the safety standards previously set by both U.S. and international standards bodies:

ANSI C95.1 (1992) *

NCRP Report 86 (1986)

ICNIRP (1996)

Safety

* American National Standards

Institute; National Council on

Radiation Protection and

Measurements; International

Commission on Non-Ionizing

Radiation Protection.

Those standards were based on comprehensive and periodic evaluations of the relevant scientific literature. For example, over 120 scientists, engineers, and physicians from universities, government health agencies, and industry reviewed the available body of research to develop the

ANSI Standard (C95.1).

The design of your phone complies with the FCC guidelines

(and those standards).

Antenna Care

Use only the supplied or an approved replacement antenna.

Unauthorized antennas, modifications, or attachments

31

32

Safety could damage the phone and may violate FCC regulations.

Phone Operation

NORMAL POSITION: Hold the phone as you would any other telephone with the antenna pointed up and over your shoulder.

Tips on Efficient Operation

For your phone to operate most efficiently:

Don’t touch the antenna unnecessarily when the phone is in use. Contact with the antenna affects call quality and may cause the phone to operate at a higher power level than otherwise needed.

Driving

Check the laws and regulations on the use of wireless phones in the areas where you drive and always obey them. Also, if using your phone while driving, please observe the following:

Give full attention to driving -driving safely is your first responsibility;

Use hands-free operation, if available;

Pull off the road and park before making or answering a call if driving conditions or the law require it.

Electronic Devices

Most modern electronic equipment is shielded from RF signals. However, certain electronic equipment may not be shielded against the RF signals from your wireless phone.

Pacemakers

The Health Industry

Manufacturers Association recommends that a minimum separation of six (6) inches be maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of

Wireless Technology Research.

Persons with pacemakers:

Should ALWAYS keep the phone more than six (6) inches from their pacemaker when the phone is turned ON;

Should not carry the phone in a breast pocket;

Should use the ear opposite the pacemaker to minimize the potential for interference;

Should turn the phone OFF immediately if there is any reason to suspect that interference is taking place.

Hearing Aids

Some digital wireless phones may interfere with some hearing aids.

In the event of such interference, you may want to consult your service provider (or call the customer service line to discuss alternatives).

Other Medical Devices

If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from external RF energy.

Your physician may be able to assist you in obtaining this information.

33

34

Safety

Health Care Facilities

Turn your phone OFF in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may use equipment that could be sensitive to external RF energy.

Vehicles

RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle.

Posted Facilities

Turn your phone OFF in any facility where posted notices so require.

Aircraft

FCC regulations prohibit using your phone while in the air.

Switch OFF your phone before boarding an aircraft.

Blasting Areas

To avoid interfering with blasting operations, turn your phone OFF when in a “blasting area” or in areas posted: “Turn off two-way radio”. Obey all signs and instructions.

Potentially Explosive

Atmosphere

Turn your phone OFF when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death.

Areas with a potentially explosive atmosphere are often, but not always marked clearly. Potential areas may include: fueling areas

(such as gasoline stations); below deck on boats; fuel or chemical transfer or storage facilities; vehicles using liquefied petroleum gas (such as propane or butane); areas where the air contains chemicals or particles

(such as grain, dust, or metal powders); and any other area where you would normally be advised to turn off your vehicle engine.

For Vehicles Equipped with an

Air Bag

An air bag inflates with great force. DO NOT place objects, including either installed or portable wireless equipment, in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result.

Safety Information

Please read and observe the following information for safe and proper use of your phone and to prevent damage. Also, keep the user guide in an accessible place at all times after reading it.

C a u t i o n !

Violation of the instructions may cause minor or serious damage to the product.

Do not disassemble or open crush, bend or deform, puncture or shred.

Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water or other liquids, expose

35

36

Safety to fire, explosion or other hazard.

Only use the battery for the system for which it is specified.

Only use the battery with a charging system that has been qualified with the system per

IEEE-Std-1725-2006. Use of an unqualified battery or charger may present a risk of fire, explosion, leakage, or other hazard.

Do not short circuit a battery or allow metallic conductive objects to contact battery terminals.

Replace the battery only with another battery that has been qualified with the system per this standard, IEEE-Std-1725-

2006. Use of an unqualified battery may present a risk of fire, explosion, leakage or other hazard.

Promptly dispose of used batteries in accordance with local regulations.

Battery usage by children should be supervised.

Avoid dropping the phone or battery. If the phone or battery is dropped, especially on a hard surface, and the user suspects damage, take it to a service center for inspection.

Improper battery use may result in a fire, explosion or other hazard.

The phone shall only be connected to USB products that bear the USB-IF logo or have completed the USB-IF compliance program.

Charger and Adapter Safety

The charger and adapter are intended for indoor use only.

Insert the battery pack charger vertically into the wall power socket.

Use the correct adapter for your phone when using the battery pack charger abroad.

Only use the approved battery charger. Otherwise, you may cause serious damage to your phone.

Battery Information and Care

Please dispose of your battery properly or take it to your local wireless carrier for recycling.

The battery doesn't need to be empty before recharging.

Use only LG-approved chargers specific to your phone model since they are designed to maximize battery life.

Do not disassemble or shortcircuit the battery.

Keep the battery’s metal contacts clean.

Replace the battery when it no longer provides acceptable performance. The battery can be recharged several hundred times before replacement.

Recharge the battery after long periods of non-use to maximize battery life.

Battery life will vary due to usage patterns and environmental conditions.

Use of extended backlighting,

Browser, and data connectivity kits affect battery life and talk/standby times.

The self-protection function of the battery cuts the power of the phone when its operation is in an abnormal state. In this case, remove the battery from the phone, reinstall it, and turn the phone on.

37

38

Safety

Explosion, Shock, and Fire

Hazards

Do not put your phone in a place subject to excessive dust and keep the minimum required distance between the power cord and heat sources.

Unplug the power cord prior to cleaning your phone, and clean the power plug pin when it’s dirty.

When using the power plug, ensure that it’s firmly connected. If not, it may cause excessive heat or fire.

If you put your phone in a pocket or bag without covering the receptacle of the phone (power plug pin), metallic articles (such as a coin, paperclip or pen) may short-circuit the phone.

Always cover the receptacle when not in use.

Don’t short-circuit the battery.

Metallic articles such as a coin, paperclip or pen in your pocket or bag may shortcircuit the + and – terminals of the battery (metal strips on the battery) upon moving.

Short-circuit of the terminal may damage the battery and cause an explosion.

Do not disassemble or crush the battery. It may cause a fire.

General Notice

Using a damaged battery or placing a battery in your mouth may cause serious injury.

Do not place items containing magnetic components such as a credit card, phone card, bank book, or subway ticket near your phone. The magnetism of the phone may damage the data stored in the magnetic strip.

Talking on your phone for a long period of time may reduce call quality due to heat generated during use.

When the phone is not used for a long period time, store it in a safe place with the power cord unplugged.

Using the phone in proximity to receiving equipment (i.e.,

TV or radio) may cause interference to the phone.

Do not use the phone if the antenna is damaged. If a damaged antenna contacts skin, it may cause a slight burn. Please contact an LG

Authorized Service Center to replace the damaged antenna.

Do not immerse your phone in water. If this happens, turn it off immediately and remove the battery. If the phone does not work, take it to an LG

Authorized Service Center.

Do not paint your phone.

The data saved in your phone might be deleted due to careless use, repair of the phone, or upgrade of the software. Please backup your important phone numbers.

(Ring tones, text messages, voice messages, pictures, and videos could also be deleted.)

The manufacturer is not liable for damage due to the loss of data.

When you use the phone in public places, set the ringtone to vibration so you don't disturb others.

Do not turn your phone on or off when putting it to your ear.

Use accessories, such as earphones and headsets, with caution. Ensure that cables are tucked away safely and do not touch the antenna unnecessarily.

39

40

Safety

Warning! Important safety information

Avoiding hearing damage

Permanent hearing loss may occur if you use your phone and/or headset at a high volume.

Set the volume to a safe level.

You can adapt over time to a higher volume of sound that may sound normal but can be damaging to your hearing. If you experience ringing in your ears or muffled speech, stop listening and have your hearing checked.

The louder the volume, the less time is required before your hearing could be affected.

Hearing experts suggest that to protect your hearing:

Limit the amount of time you use your phone and/or headset at high volume.

Avoid turning up the volume to block out noisy surroundings.

Turn the volume down if you can’t hear people speaking near you.

For information about how to set a maximum volume limit on your phone, see the features guide for your phone.

Using your phone safely

Use of your phone while operating a vehicle is not recommended and is illegal in some areas. Be careful and attentive while driving. Stop using your phone if you find it disruptive or distracting while operating any type of vehicle or performing any other activity that requires your full attention.

Avoiding hearing damage

Permanent hearing loss may occur if you use your headset at a high volume. Set the volume to a safe level. You can adapt over time to a higher volume of sound that may sound normal but can be damaging to your hearing. If you experience ringing in your ears or muffled speech, stop listening and have your hearing checked. The louder the volume, the less time is required before your hearing could be affected.

Hearing experts suggest that to protect your hearing:

Limit the amount of time you use headset at high volume.

Avoid turning up the volume to block out noisy surroundings.

Turn the volume down if you can’t hear people speaking near you.

For information about how to set a maximum volume limit on your handset, please refer to the features guide for your handset.

Using headsets safely

Use of headsets to listen to music while operating a vehicle is not recommended and is illegal in some areas. Be careful and attentive while driving. Stop using this device if you find it disruptive or distracting while operating any type of vehicle or performing any other activity that requires your full attention.

FDA Consumer

Update

The U.S. Food and Drug

Administration’s Center for

Devices and Radiological Health

Consumer Update on Mobile

Phones:

41

42

Safety

1. Do wireless phones pose a health hazard?

The available scientific evidence does not show that any health problems are associated with using wireless phones. There is no proof, however, that wireless phones are absolutely safe.

Wireless phones emit low levels of Radio Frequency (RF) energy in the microwave range while being used. They also emit very low levels of RF when in standby mode. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low level RF that does not produce heating effects causes no known adverse health effects. Many studies of low level RF exposures have not found any biological effects. Some studies have suggested that some biological effects may occur, but such findings have not been confirmed by additional research. In some cases, other researchers have had difficulty in reproducing those studies, or in determining the reasons for inconsistent results.

2. What is the FDA's role concerning the safety of wireless phones?

Under the law, the FDA does not review the safety of radiationemitting consumer products such as wireless phones before they can be sold, as it does with new drugs or medical devices.

However, the agency has authority to take action if wireless phones are shown to emit Radio Frequency (RF) energy at a level that is hazardous to the user. In such a case, the FDA could require the manufacturers of wireless phones to notify users of the health hazard and to repair, replace, or recall the phones so that the hazard no longer exists.

Although the existing scientific data do not justify FDA regulatory actions, the FDA has urged the wireless phone industry to take a number of steps, including the following:

Support needed research into possible biological effects of

RF of the type emitted by wireless phones;

Design wireless phones in a way that minimizes any RF exposure to the user that is not necessary for device function; and

Cooperate in providing users of wireless phones with the best possible information on possible effects of wireless phone use on human health.

The FDA belongs to an interagency working group of the federal agencies that have responsibility for different aspects of RF safety to ensure coordinated efforts at the federal level. The following agencies belong to this working group:

National Institute for

Occupational Safety and

Health

Environmental Protection

Agency

Occupational Safety and

Health Administration

National Telecommunications and Information

Administration

The National Institutes of Health participates in some interagency working group activities, as well.

The FDA shares regulatory responsibilities for wireless phones with the Federal

Communications Commission

(FCC). All phones that are sold in the United States must comply

43

44

Safety with FCC safety guidelines that limit RF exposure. The FCC relies on the FDA and other health agencies for safety questions about wireless phones.

The FCC also regulates the base stations that the wireless phone networks rely upon. While these base stations operate at higher power than do the wireless phones themselves, the RF exposures that people get from these base stations are typically thousands of times lower than those they can get from wireless phones. Base stations are thus not the subject of the safety questions discussed in this document.

3. What kinds of phones are the subject of this update?

The term “wireless phone” refers here to handheld wireless phones with built-in antennas, often called “cell”, “mobile”, or “PCS” phones. These types of wireless phones can expose the user to measurable Radio Frequency

(RF) energy because of the short distance between the phone and the user’s head.

These RF exposures are limited by FCC safety guidelines that were developed with the advice of the FDA and other federal health and safety agencies. When the phone is located at greater distances from the user, the exposure to RF is drastically lower because a person's RF exposure decreases rapidly with increasing distance from the source. The so-called “cordless phones,” which have a base unit connected to the telephone wiring in a house, typically operate at far lower power levels, and thus produce RF exposures far below the FCC safety limits.

4. What are the results of the

research done already?

The research done thus far has produced conflicting results, and many studies have suffered from flaws in their research methods.

Animal experiments investigating the effects of Radio Frequency

(RF) energy exposures characteristic of wireless phones have yielded conflicting results that often cannot be repeated in other laboratories. A few animal studies, however, have suggested that low levels of RF could accelerate the development of cancer in laboratory animals.

However, many of the studies that showed increased tumor development used animals that had been genetically engineered or treated with cancer-causing chemicals so as to be predisposed to develop cancer in the absence of RF exposure.

Other studies exposed the animals to RF for up to 22 hours per day. These conditions are not similar to the conditions under which people use wireless phones, so we do not know with certainty what the results of such studies mean for human health.

Three large epidemiology studies have been published since

December 2000. Between them, the studies investigated any possible association between the use of wireless phones and primary brain cancer, glioma, meningioma, or acoustic neuroma, tumors of the brain or salivary gland, leukemia, or other cancers. None of the studies demonstrated the existence of any harmful health effects from wireless phone RF exposures.

However, none of the studies can answer questions about longterm exposures, since the average period of phone use in these studies was around three years.

45

46

Safety

5. What research is needed to decide whether RF exposure from wireless phones poses a health risk?

A combination of laboratory studies and epidemiological studies of people actually using wireless phones would provide some of the data that are needed. Lifetime animal exposure studies could be completed in a few years. However, very large numbers of animals would be needed to provide reliable proof of a cancer promoting effect if one exists. Epidemiological studies can provide data that is directly applicable to human populations, but ten or more years follow-up may be needed to provide answers about some health effects, such as cancer.

This is because the interval between the time of exposure to a cancer-causing agent and the time tumors develop — if they do — may be many, many years.

The interpretation of epidemiological studies is hampered by difficulties in measuring actual RF exposure during day-to-day use of wireless phones. Many factors affect this measurement, such as the angle at which the phone is held, or which model of phone is used.

6. What is the FDA doing to find out more about the possible health effects of wireless phone RF?

The FDA is working with the U.S.

National Toxicology Program and with groups of investigators around the world to ensure that high priority animal studies are conducted to address important questions about the effects of exposure to Radio Frequency

(RF) energy.

The FDA has been a leading participant in the World Health

Organization International

Electro Magnetic Fields (EMF)

Project since its inception in

1996. An influential result of this work has been the development of a detailed agenda of research needs that has driven the establishment of new research programs around the world. The project has also helped develop a series of public information documents on EMF issues.

The FDA and the Cellular

Telecommunications & Internet

Association (CTIA) have a formal

Cooperative Research And

Development Agreement

(CRADA) to do research on wireless phone safety. The FDA provides the scientific oversight, obtaining input from experts in government, industry, and academic organizations. CTIAfunded research is conducted through contracts with independent investigators. The initial research will include both laboratory studies and studies of wireless phone users. The

CRADA will also include a broad assessment of additional research needs in the context of the latest research developments around the world.

7. How can I find out how much

Radio Frequency energy exposure I can get by using my wireless phone?

All phones sold in the United

States must comply with Federal

Communications Commission

(FCC) guidelines that limit Radio

Frequency (RF) energy exposures.

The FCC established these guidelines in consultation with the FDA and the other federal health and safety agencies. The

FCC limit for RF exposure from wireless phones is set at a

Specific Absorption Rate (SAR)

47

48

Safety of 1.6 watts per kilogram (1.6

W/kg). The FCC limit is consistent with the safety standards developed by the

Institute of Electrical and

Electronic Engineering (IEEE) and the National Council on

Radiation Protection and

Measurement. The exposure limit takes into consideration the body’s ability to remove heat from the tissues that absorb energy from the wireless phone and is set well below levels known to have effects. Manufacturers of wireless phones must report the

RF exposure level for each model of phone to the FCC. The FCC website

(http://www.fcc.gov/oet/rfsafety) gives directions for locating the

FCC identification number on your phone so you can find your phone’s RF exposure level in the online listing.

8. What has the FDA done to measure the Radio Frequency energy coming from wireless phones?

The Institute of Electrical and

Electronic Engineers (IEEE) is developing a technical standard for measuring the Radio

Frequency (RF) energy exposure from wireless phones and other wireless handsets with the participation and leadership of

FDA scientists and engineers.

The standard, “Recommended

Practice for Determining the

Spatial-Peak Specific Absorption

Rate (SAR) in the Human Body

Due to Wireless Communications

Devices: Experimental

Techniques”, sets forth the first consistent test methodology for measuring the rate at which RF is deposited in the heads of wireless phone users. The test method uses a tissue-simulating model of the human head.

Standardized SAR test methodology is expected to greatly improve the consistency of measurements made at different laboratories on the same phone. SAR is the measurement of the amount of energy absorbed in tissue, either by the whole body or a small part of the body. It is measured in watts/kg (or milliwatts/g) of matter. This measurement is used to determine whether a wireless phone complies with safety guidelines.

9. What steps can I take to reduce my exposure to Radio

Frequency energy from my wireless phone?

If there is a risk from these products — and at this point we do not know that there is — it is probably very small. But if you are concerned about avoiding even potential risks, you can take a few simple steps to minimize your exposure to Radio

Frequency (RF) energy. Since time is a key factor in how much exposure a person receives, reducing the amount of time spent using a wireless phone will reduce RF exposure. If you must conduct extended conversations by wireless phone every day, you could place more distance between your body and the source of the RF, since the exposure level drops off dramatically with distance. For example, you could use a headset and carry the wireless phone away from your body or use a wireless phone connected to a remote antenna. Again, the scientific data do not demonstrate that wireless phones are harmful. But if you are concerned about the RF exposure from these products, you can use measures like those

49

Safety

50 described above to reduce your

RF exposure from wireless phone use.

10. What about children using wireless phones?

The scientific evidence does not show a danger to users of wireless phones, including children and teenagers. If you want to take steps to lower exposure to Radio Frequency

(RF) energy, the measures described above would apply to children and teenagers using wireless phones. Reducing the time of wireless phone use and increasing the distance between the user and the RF source will reduce RF exposure.

Some groups sponsored by other national governments have advised that children be discouraged from using wireless phones at all. For example, the government in the United

Kingdom distributed leaflets containing such a recommendation in December

2000. They noted that no evidence exists that using a wireless phone causes brain tumors or other ill effects. Their recommendation to limit wireless phone use by children was strictly precautionary; it was not based on scientific evidence that any health hazard exists.

11. What about wireless phone interference with medical equipment?

Radio Frequency (RF) energy from wireless phones can interact with some electronic devices. For this reason, the FDA helped develop a detailed test method to measure Electro Magnetic

Interference (EMI) of implanted cardiac pacemakers and defibrillators from wireless telephones. This test method is

now part of a standard sponsored by the Association for the Advancement of Medical

Instrumentation (AAMI). The final draft, a joint effort by the

FDA, medical device manufacturers, and many other groups, was completed in late

2000. This standard will allow manufacturers to ensure that cardiac pacemakers and defibrillators are safe from wireless phone EMI.

The FDA has tested hearing aids for interference from handheld wireless phones and helped develop a voluntary standard sponsored by the Institute of

Electrical and Electronic

Engineers (IEEE). This standard specifies test methods and performance requirements for hearing aids and wireless phones so that no interference occurs when a person uses a

“compatible” phone and a

“compatible” hearing aid at the same time. This standard was approved by the IEEE in 2000.

The FDA continues to monitor the use of wireless phones for possible interactions with other medical devices. Should harmful interference be found to occur, the FDA will conduct testing to assess the interference and work to resolve the problem.

12. Where can I find additional information?

For additional information, please refer to the following resources:

FDA web page on wireless phones

(http://www.fda.gov/cellphones/)

Federal Communications

Commission (FCC) RF Safety

Program

(http://www.fcc.gov/oet/rfsafety)

International Commission on

51

Safety

52

Non-lonizing Radiation

Protection

(http://www.icnirp.de)

World Health Organization

(WHO) International EMF

Project

(http://www.who.int/emf)

National Radiological Protection

Board (UK)

(http://www.hpa.org.uk/radiation/)

10 Driver Safety Tips

Your wireless phone gives you the powerful ability to communicate by voice almost anywhere, anytime. An important responsibility accompanies the benefits of wireless phones, one that every user must uphold.

When operating a car, driving is your first responsibility. When using your wireless phone behind the wheel of a car, practice good common sense and remember the following tips:

1. Get to know your wireless phone and its features such as speed dial and redial. Carefully read your instruction manual and learn to take advantage of valuable features most phones offer, including automatic redial and memory. Also, work to memorize the phone keypad so you can use the speed dial function without taking your attention off the road.

2. When available, use a handsfree device. A number of hands-free wireless phone accessories are readily available today. Whether you choose an installed mounted device for your wireless phone or a speaker phone accessory, take advantage of these devices if available to you.

3. Make sure you place your wireless phone within easy

reach and where you can reach it without removing your eyes from the road. If you get an incoming call at an inconvenient time, if possible, let your voicemail answer it for you.

4. Suspend conversations during hazardous driving conditions or situations. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow, and ice can be hazardous, but so is heavy traffic. As a driver, your first responsibility is to pay attention to the road.

5. Don’t take notes or look up phone numbers while driving.

If you are reading an address book or business card, or writing a “to-do” list while driving a car, you are not watching where you are going.

It is common sense. Do not get caught in a dangerous situation because you are reading or writing and not paying attention to the road or nearby vehicles.

6. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan your calls before you begin your trip or attempt to coincide your calls with times you may be stopped at a stop sign, red light, or otherwise stationary. But if you need to dial while driving, follow this simple tip -- dial only a few numbers, check the road and your mirrors, then continue.

7. Do not engage in stressful or emotional conversations that may be distracting. Stressful or emotional conversations and driving do not mix; they 53

Safety

54 are distracting and even dangerous when you are behind the wheel of a car.

Make people you are talking with aware you are driving and if necessary, suspend conversations which have the potential to divert your attention from the road.

8. Use your wireless phone to call for help. Your wireless phone is one of the greatest tools you can own to protect yourself and your family in dangerous situations -- with your phone at your side, help is only three numbers away. Dial 911 or other local emergency number in the case of fire, traffic accident, road hazard, or medical emergency. Remember, it’s a free call on your wireless phone!

9. Use your wireless phone to help others in emergencies.

Your wireless phone provides you a perfect opportunity to be a “Good Samaritan” in your community. If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call 911 or other local emergency number, as you would want others to do for you.

10. Call roadside assistance or a special wireless nonemergency assistance number when necessary.

Certain situations you encounter while driving may require attention, but are not urgent enough to merit a call for emergency services. But you can still use your wireless phone to lend a hand. If you see a brokendown vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one

appears injured or a vehicle you know to be stolen, call roadside assistance or other special non-emergency wireless number.

The above tips are meant as general guidelines. Before deciding to use your mobile device while operating a vehicle, it is recommended that you consult your applicable jurisdiction’s local laws or other regulations regarding such use.

Such laws or other regulations may prohibit or otherwise restrict the manner in which a driver may use his or her phone while operating a vehicle.

Consumer Information on SAR

(Specific Absorption Rate)

This Model Phone Meets the

Government’s Requirements for

Exposure to Radio Waves.

Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal

Communications Commission

(FCC) of the U.S. Government.

These FCC exposure limits are derived from the recommendations of two expert organizations, the National

Counsel on Radiation Protection and Measurement (NCRP) and the Institute of Electrical and

Electronics Engineers (IEEE). In both cases, the recommendations were

55

56

Safety developed by scientific and engineering experts drawn from industry, government, and academia after extensive reviews of the scientific literature related to the biological effects of RF energy.

The exposure Limit for wireless mobile phones employs a unit of measurement known as the

Specific Absorption Rate, or SAR.

The SAR is a measure of the rate of absorption of RF energy by the human body expressed in units of watts per kilogram

(W/kg). The FCC requires wireless phones to comply with a safety limit of 1.6 watts per kilogram (1.6 W/kg). The FCC exposure limit incorporates a substantial margin of safety to give additional protection to the public and to account for any variations in measurements.

Tests for SAR are conducted using standard operating positions specified by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands.

Although SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. Because the phone is designed to operate at multiple power levels to use only the power required to reach the network, in general, the closer you are to a wireless base station antenna, the lower the power output.

Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the governmentadopted requirement for safe exposure. The tests are performed in positions and

locations (e.g., at the ear and worn on the body) as required by the FCC for each model.

This device was tested for typical body-worn operations with the back of the phone kept 0.79

inches (2.0 cm) between the user’s body and the back of the phone. To comply with FCC RF exposure requirements, a minimum separation distance of

0.79 inches (2.0 cm) must be maintained between the user s body and the back of the phone.

Third-party belt-clips, holsters, and similar accessories containing metallic components should not be used. Body-worn accessories that cannot maintain

0.79 inches (2.0 cm) separation distance between the user's body and the back of the phone, and have not been tested for typical body-worn operations may not comply with FCC RF exposure limits and should be avoided.

The FCC has granted an

Equipment Authorization for this model phone with all reported

SAR levels evaluated as in compliance with the FCC RF emission guidelines.

The highest SAR value for this model phone when tested for use at the ear is 0.952 W/kg and when worn on the body, as described in this user’s manual, is

0.644 W/kg. While there may be differences between SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure.

SAR information on this model phone is on file with the FCC and can be found under the

Display Grant section of http://www.fcc.gov/oet/fccid

57

58

Safety after searching on FCC ID.

To find information that pertains to a particular model phone, this site uses the phone FCC ID number which is usually printed somewhere on the case of the phone. Sometimes it may be necessary to remove the battery pack to find the number. Once you have the FCC ID number for a particular phone, follow the instructions on the website and it should provide values for typical or maximum SAR for a particular phone.

Additional information on

Specific Absorption Rates (SAR) can be found on the Cellular

Telecommunications Industry

Association (CTIA) website at http://www.ctia.org/

*In the United States and

Canada, the SAR limit for mobile phones used by the public is 1.6

watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements.

FCC Hearing-Aid

Compatibility (HAC)

Regulations for Wireless

Devices

On July 10, 2003, the U.S.

Federal Communications

Commission (FCC) Report and

Order in WT Docket 01-309 modified the exception of wireless phones under the

Hearing Aid Compatibility Act of

1988 (HAC Act) to require digital wireless phones be compatible with hearing-aids.

The intent of the HAC Act is to ensure reasonable access to

telecommunications services for persons with hearing disabilities.

While some wireless phones are used near some hearing devices

(hearing aids and cochlear implants), users may detect a buzzing, humming, or whining noise. Some hearing devices are more immune than others to this interference noise, and phones also vary in the amount of interference they generate.

The wireless telephone industry has developed a rating system for wireless phones, to assist hearing device users find phones that may be compatible with their hearing devices. Not all phones have been rated.

Phones that are rated have the rating on their box or a label located on the box.

The ratings are not guarantees.

Results will vary depending on the user’s hearing device and hearing loss. If your hearing device happens to be vulnerable to interference, you may not be able to use a rated phone successfully. Trying out the phone with your hearing device is the best way to evaluate it for your personal needs.

M-Ratings: Phones rated M3 or

M4 meet FCC requirements and are likely to generate less interference to hearing devices than phones that are not labeled. M4 is the better/higher of the two ratings.

T-Ratings: Phones rated T3 or

T4 meet FCC requirements and are likely to generate less interference to hearing devices than phones that are not labeled. T4 is the better/higher of the two ratings.

59

60

Safety

Hearing devices may also be rated. Your hearing device manufacturer or hearing health professional may help you find this rating. Higher ratings mean that the hearing device is relatively immune to interference noise. The hearing aid and wireless phone rating values are then added together. A sum of 5 is considered acceptable for normal use. A sum of 6 is considered for best use.

In the above example, if a hearing aid meets the M2 level rating and the wireless phone meets the M3 level rating, the sum of the two values equal M5. This is synonymous for T ratings. This should provide the hearing aid user with “normal usage” while using their hearing aid with the particular wireless phone.

“Normal usage” in this context is defined as a signal quality that is acceptable for normal operation.

The M mark is intended to be synonymous with the U mark.

The T mark is intended to be synonymous with the UT mark.

The M and T marks are recommended by the Alliance for

Telecommunications Industries

Solutions (ATIS). The U and UT marks are referenced in Section

20.19 of the FCC Rules. The

HAC rating and measurement procedure are described in the

American National Standards

Institute (ANSI) C63.19

standard.

To enter that the Hearing Aid

Compatibility rating for your phone is maintained, secondary transmitters such as Bluetooth and WLAN components must be disabled during a call. See Page

52 for instructions to disable these components.

FCC Hearing Aid Compatibility and Volume Control

http://www.fcc.gov/cgb/dro/hearing.html

Gallaudet University, RERC

http://tap.Gallaudet.edu/DigWireless.KS/DigWireless.htm

Hearing Loss Association of America [HLAA]

http://www.hearingloss.org/learn/cellphonetech.asp

The Hearing Aid Compatibility FCC Order

http://hraunfoss.fcc.gov/edocs_public/attachmatch/FCC-03-

168A1.pdf

61

62

Limited Warranty Statement

1. WHAT THIS WARRANTY

COVERS:

LG offers you a limited warranty that the enclosed subscriber unit and its enclosed accessories will be free from defects in material and workmanship, according to the following terms and conditions:

(1) The limited warranty for the product extends for TWELVE

(12) MONTHS beginning on the date of purchase of the product with valid proof of purchase, or absent valid proof of purchase, FIFTEEN

(15) MONTHS from date of manufacture as determined by the unit’s manufacture date code.

(2) The limited warranty extends only to the original purchaser of the product and is not assignable or transferable to any subsequent purchaser/end user.

(3) This warranty is good only to the original purchaser of the product during the warranty period as long as it is in the U.S, including

Alaska, Hawaii, U.S.

Territories and Canada.

(4) The external housing and cosmetic parts shall be free of defects at the time of shipment and, therefore, shall not be covered under these limited warranty terms.

(5) Upon request from LG, the consumer must provide information to reasonably prove the date of purchase.

(6) The customer shall bear the cost of shipping the product to the Customer Service

Department of LG. LG shall bear the cost of shipping the product back to the consumer after the completion of service under this limited warranty.

2. WHAT THIS WARRANTY

DOES NOT COVER:

(1) Defects or damages resulting from use of the product in other than its normal and customary manner.

(2) Defects or damages from abnormal use, abnormal conditions, improper storage, exposure to moisture or dampness, unauthorized modifications, unauthorized connections, unauthorized repair, misuse, neglect, abuse, accident, alteration, improper installation, or other acts which are not the fault of

LG, including damage caused by shipping, blown fuses, spills of food or liquid.

(3) Breakage or damage to antennas unless caused directly by defects in material or workmanship.

(4) That the Customer Service

Department at LG was not notified by consumer of the alleged defect or malfunction of the product during the applicable limited warranty period.

(5) Products which have had the serial number removed or made illegible.

(6) This limited warranty is in lieu of all other warranties, express or implied either in fact or by operations of law, statutory or otherwise,

63

Limited Warranty Statement

64 including, but not limited to any implied warranty of marketability or fitness for a particular use.

(7) Damage resulting from use of non-LG approved accessories.

(8) All plastic surfaces and all other externally exposed parts that are scratched or damaged due to normal customer use.

(9) Products operated outside published maximum ratings.

(10)Products used or obtained in a rental program.

(11) Consumables (such as fuses).

3. WHAT LG WILL DO:

“LG will, at its sole option, either repair, replace or refund the purchase price of any unit that does not conform to this limited warranty. LG may choose at its option to use functionally equivalent re-conditioned, refurbished or new units or parts or any units. In addition, LG will not re-install or back-up any data, applications or software that you have added to your phone. It is therefore recommended that you back-up any such data or information prior to sending the unit to LG to avoid the permanent loss of such information.”

4. STATE LAW RIGHTS:

No other express warranty is applicable to this product. THE

DURATION OF ANY IMPLIED

WARRANTIES, INCLUDING THE

IMPLIED WARRANTY OF

MARKETABILITY, IS LIMITED TO

THE DURATION OF THE

EXPRESS WARRANTY HEREIN.

LG SHALL NOT BE LIABLE FOR

THE LOSS OF THE USE OF THE

PRODUCT, INCONVENIENCE,

LOSS OR ANY OTHER

DAMAGES, DIRECT OR

CONSEQUENTIAL, ARISING

OUT OF THE USE OF, OR

INABILITY TO USE, THIS

PRODUCT OR FOR ANY

BREACH OF ANY EXPRESS OR

IMPLIED WARRANTY,

INCLUDING THE IMPLIED

WARRANTY OF MARKETABILITY

APPLICABLE TO THIS

PRODUCT.

Some states do not allow the exclusive limitation of incidental or consequential damages or limitations on how long an implied warranty lasts; so these limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

5. HOW TO GET WARRANTY

SERVICE:

To obtain warranty service, please call or fax to the following telephone numbers from anywhere in the continental

United States:

Tel. 1-800-793-8896 or Fax.

1-800-448-4026

Or visit http://us.lgservice.com.

Correspondence may also be mailed to:

LG Electronics Service- Mobile

Handsets

P.O. Box 240007, Huntsville, AL

35824

DO NOT RETURN YOUR

PRODUCT TO THE ABOVE

ADDRESS

. Please call or write for the location of the LG authorized service center nearest you and for the procedures for obtaining warranty claims.

65

66

Index

1

10 Driver Safety Tips

52

A

Announce Alert 29

Auto Pair Handsfree

27

B

Battery Charge Level

20

Best Match 30

Bluetooth® 25

Browser 22

C

Charging the Battery

20

Command Mode 29

Consumer Information

on SAR 55

F

FCC Hearing-Aid

Compatibility (HAC)

Regulations for

Wireless Devices 58

FDA Consumer Update

41

G

Game & Apps 25

Getting Started with

Your Phone 19

I

Important Safety

Precautions 1

Index 66

L

Launch 28

Limited Warranty

Statement 62

M

Memory 30

Multimedia 21

My Bluetooth Info 27

My Bluetooth Name

27

My Visibility 27

P

Paired Devices 25

Phone Info 30

Phone Overview 14

Power 26

S

Safety 31

Safety Information 35

Settings 30

Start Browser 22

Start Command 28

T

Table of Contents 4

Take Photo 21

Technical Details 8

The Battery 19

TIA Safety Information

31

Tools 25

Train Word 30

V

Voice Command 28

W

Warning! Important

safety information 40

Welcome 7

67

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement