LG | LCS300AN | User's Manual | LG LCS300AN User's Manual

ENGLISH
OWNER'S MANUAL
CAR CD/MP3/WMA Receiver
Please read this manual carefully before operating
your set and retain it for future reference.
MODEL
LCS300AN/ LCS300AR
LCS500UN/ LCS500UR
P/NO : MFL63287304
Table of Contents
3
4
5
Safety Note
Front Panel
Remote Control
Battery installation
6
About detachable control panel
Attaching the control panel
Detaching the control panel
7
Installation
Basic installation
Removing the existing receiver unit
ISO-DIN installation
8
Connection
9-10 Basic operation
Mute
Using the EQ
Using XDSS+ (Extreme Dynamic Sound System)
Checking the clock
Turning off the display light
Resetting the unit
Adjusting general settings
10-11 Listening to a CD
Pausing or restarting CD playback
Searching for a section within a track /file
Skipping to another track/ file
Checking information about your music
Playing back tracks/files in a way you want
2
CAR CD/MP3/WMA Receiver
11
Listening to music from an external device
12-13 Listening to the radio
13
14
15
Storing desired frequencies manually
Listening to a preset station
Adjusting tuner settings
Using an USB device (OPTIONAL)
Moving to another drive
Quick search of a desired file
Troubleshooting
Specifications
Safety Note
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : This product uses a Laser System.
To ensure proper use of this product, please read this owner’s manual carefully and
retain it for future reference.
Should the unit require maintenance, contact an authorized service center. Performing
controls, adjustments, or carrying out procedures other than those specified herein
may result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open the enclosure. Visible
laser radiation when open. DO NOT STARE INTO BEAM.
CAUTION : TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT SPLIT COVER(OR BACK) NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the product.
Always operate the vehicle in a safe manner.
Do not become distracted by the vehicle while driving, and always be fully
aware of all driving condition. Do not change settings, or any functions.
Pull over in a safe and legal manner before attempting such operations.
8 cm
Do not use for many hours at extremely low or high temperature.
(-10 °C to 60 °C)
To reduce the risk of electric shock, do not remove the cover or back of
this product. There are no user-serviceable parts inside.
Refer servicing to qualified service personnel.
“This device is equipped with a portable battery or accumulator.
Safe way to remove the battery or the battery from the equipment:
Remove the old battery or battery pack, follow the steps in reverse order than the
assembly. To prevent contamination of the environment and bring on possible threat
to human and animal health, the old battery or the battery put it in the appropriate
container at designated collection points. Do not dispose of batteries or battery
together with other waste. It is recommended that you use local, free reimbursement
systems batteries and accumulator.”
The battery shall not be exposed to excessive heat such as sunshine, fire or the like.
Caution
When being connected in a wrong way, the unit displays as follows.
- Antenna port short : “ANTENNA ON PORT SHORT CIRCUIT CHECK”
After connecting it again, restart the unit.
To reduce the risk of fire or electric shock, do not expose this product to
dripping or splashing water, rain, or moisture.
The temperature of unit’s outside can be extremely high, please use the
unit after proper installation in your vehicle.
This unit cannot play 8 cm disc (use 12 cm disc only).
CAR CD/MP3/WMA Receiver
3
Front Panel
a [SRC] Selects function sources.
[• OFF] Power on/ off.
b [Menu] Activates setting menu.
c Volume knob
• Adjusts volume level.
• Confirms the settings.
• Checking tracks or files in CD mode or preset
stations in TUNER mode.
d [BAND] Selects a band.
[• TA] Traffic Announcement (OPTIONAL)
Searches stations that have TA/TP information.
e Remote Sensor
f Display window
g [EQ]/[• XDSS+]
Improves sound quality.
h [DISP]
• Press it, you can check the clock time.
• Press and hold it, you can turn off the display
light.
4
CAR CD/MP3/WMA Receiver
i [Z] Releases a disc.
j [
] Opens the front panel.
k [Mute]
Temporarily stops the sound.
l [ ] Returns to the previous step.
m b?-/+?B
Skip / Search / Seek / Tune
n [FUNC] In each mode, sets playback items.
o BX Plays and pauses playback.
p [INT] Intro scan
q [RPT] Repeat function
r [SHF] Shuffle
s Numeric buttons
Selects a numbered preset station in TUNER
t [AUX] If connected to other portable player,
you can enjoy musics from it on the unit.
u USB port (OPTIONAL)
Remote Control
Battery Installation
1
a
b
c
d
e
f
g Adjusts volume level.
h [m M]
Skip/ Search/ Seek/ Tune
[ ]
Returns to the previous step.
[v V]
• List up/ down
• Adjusts settings.
• Moves 10 MP3/WMA tracks
backward or forward if there is
no folder or one folder on a CD.
• Moves to the previous or next
folder if there are more than 2
folders on a CD.
[ENTER/ LIST]
• Confirms the settings.
• Checks tracks or files in CD
mode or preset stations in
TUNER mode.
[SRC] Selects function sources. i [DISP]
• Press it, you can check the
[• OFF] Power off.
clock time.
[• Menu] Activates setting menu
• Press and hold it, you can turn
[FUNC]
off the display light.
In each mode, sets playback
j [RPT] Repeat function
items.
k [INT] Intro scan
[BAND/DRV]
l Numeric buttons
• Selects a band.
Selects a numbered preset sta• Moves to a next USB drive
tion in TUNER.
(OPTIONAL)
[B/X]
Plays or pauses playback
[SHF] Shuffle
[MUTE]
Temporarily stops the sound.
2
3
Pull out the battery holder with a
sharp product like a ball point pen.
Put the battery with
and
correctly on the battery holder.
Push the battery holder back into
its original position.
Note
• Use only one CR2025 (3 V) lithium battery.
• Remove the battery if the remote control is not used for a long period of
time.
• Do not leave the product in a hot or humid place.
• Do not handle the battery with metallic tools.
• Do not store the battery with metallic materials.
CAR CD/MP3/WMA Receiver
5
About detachable control panel
Attaching the control panel
Detaching the control panel
1
Align the left side of the panel with
the stopper.
1
Press the
panel.
2
Push the right side or panel into
the unit until it clicks.
2
Push the control panel to right.
3
4
Pull the control panel out of the unit.
Put the detached control panel into
the protective case.
to open the control
2
1
Control panel
Caution
• The control buttons may not work properly if the control panel is not attached
properly. If this occurs, gently press the display.
• Do not leave the control panel in any area exposed to high temperatures or
direct sunlight.
• Do not drop the control panel or otherwise subject it to strong impact.
• Do not allow such volatile agents as benzine, thinner, or insecticides to come
into contact with the surface of the control panel.
6
CAR CD/MP3/WMA Receiver
Protective Case
Note
Periodically wipe the contacts on the back of the control
panel with a cotton swap moistened with alcohol. For safety,
turn off the ignition before cleaning, and remove the key
from the ignition switch.
Installation
ISO-DIN Installation
Basic Installation
1
Before installing, make sure that the
ignition-switch is set to OFF and
remove the terminal of the car battery
to avoid short-circuiting.
Bend the claws
according to
the thickness
of the
dashboard
1
2
3
4
Remove the existing receiver unit.
Make the necessary connections.
Install the installation sleeve.
Install the unit into the installation
sleeve.
Control panel
2
1
4
5
6
Control panel
3
3
2
4
5
6
Slide the unit into the ISO-DIN
frame.
Fit screws removed from the old
unit.
Slide the unit and frame into the
dash opening.
Install the dash panel or adapter
plate.
Install the trim ring to the unit.
Install the control panel to the unit.
Removing the existing receiver unit
If there is already an installation
sleeve for the receiver unit in the
dashboard, it must be removed.
A
1
2
A
3
Remove the rear support from the
unit.
Remove the control panel and trim
ring from the unit.
Insert the lever A into the hole on
one side of the unit.
Perform the same operation on
the other side and pull the unit out
from the mounting sleeve.
CAR CD/MP3/WMA Receiver
7
Connection
Before connecting, make sure that the ignition switch is set to OFF, and remove the battery # terminal to avoid short circuits.
To Audio in (OPTIONAL)
To Audio out (OPTIONAL)
Rear Left (Sub-woofer Left)
Rear Right (Sub-woofer Right)
*Sub-woofer is optional.
Front Left
Front Right
Amplifier
(OPTIONAL)
Power
Antenna
8
A8
Power Antenna(Blue)
A7
Dimmer(Pink)
A2
To Ignition(Red)
A1
To Battery(+)(Yellow)
A5
Ground(-)(Black)
A3
Remote On(Blue/White)
A4
Phone Mute(Orange)
A6
Not connected
CAR CD/MP3/WMA Receiver
Control Relay
Dimmer Switch
Ignition Switch
Amplifier
(Optional)
B
B
B
B
B
B
B
B
1
2
3
4
5
6
7
8
Violet / Black Stripe : Rear Right –
Violet : Rear Right +
Gray / Black Stripe : Front Right –
Gray : Front Right +
Green/ Black Stripe : Rear Left –
Green : Rear Left +
White/Black Stripe : Front Left –
White : Front Left +
Checking the clock
Basic Operation
ON PLAYER
ON REMOTE
1. Turn the unit on.
Any key
-
2. Select a source.
SRC
SRC
3. Adjust the volume.
4. Turn the unit off.
Rotate the
volume knob
Press and hold
OFF
VOLUME
Press and hold
OFF
1. Press DISP once to check the clock.
2. Press it again to remove it.
Turning off the display light
1. Press and hold DISP.
2. Press and hold it again to turn it on.
Note
Under the light-off condition, press any keys, the light is turned on and then off
automatically if you don’t press it within a few seconds.
Resetting the unit
It resets the unit when it does not operate properly.
Basic operation - more you can do
1. Press [
] and pull out the front panel.
(Refer to page 6 for detaching the control panel.)
2. Prick the RESET hold with sharp object.
Mute
1. Press MUTE to cut the sound.
2. To cancel it, press again.
Using EQ(Equalizer)
Adjusting general settings
EQ is to increase or decrease the signal strength of audio frequencies. The function helps you to enjoy sound more plentifully.
You can adjust sound, light and other settings by using the MENU button.
Press EQ/ • XDSS+ on the unit repeatedly. The indicator lights up in the following order.
POP t CLASSIC t ROCK t JAZZ t VOCAL t SALSA t SAMBA t
REGGAE t RUSSY t USER1 t USER2 t Off(not displayed)
Note
• When XDSS+ is set to “Off”, you can adjust the EQ settings.
• You can adjust sound level to your preference. Once you select a USER mode
and press [SOUND], then adjust the sound level(BASS(bass), MID(middle),
TRB(treble)), it will be automatically stored for the currently selected USER
mode. Refer to the “For sound setting” for USER 1/2 mode.
Using XDSS+ (Extreme Dynamic Sound System)
It improves the treble and bass sound.
1. Press and hold EQ/ • XDSS+ on the unit.
2. To cancel it, press and hold it again.
On the Unit
1. Press MENU.
2. Rotate the volume knob to select [SOUND], [LIGHT], or [OTHER] and press it.
3. Rotate the volume knob to select the item and press it.
4. Rotate the volume knob clockwise or counterclockwise to adjust the level.
5. Press the volume knob to confirm the setting.
If you want to return to the previous step, press .
On the Remote Control
1. Press and hold FUNC/ • MENU
2. Press v or V to select [SOUND], [LIGHT], or [OTHER] and press ENTER.
3. Press v or V to select the mode and press ENTER.
4. Press v or V to adjust the level.
5. Press ENTER to confirm the setting.
If you want to return to the previous step, press .
For Sound setting
You can adjust sound quality by adjusting the level of BAL(left/right speaker),
FAD(front/rear speaker) and S--W(Sub-woofer:optional).
CAR CD/MP3/WMA Receiver
9
For Light setting
You can adjust the light effects by adjusting LED, DIM, or DIM L.
LED COL1/ COL2/ AUTO: You can change the LED window color.
DIM(Dimmer) OFF / ON / AUTO : You can change the brightness of the display window during the power-on status. When you set DIMMER to AUTO,
the dimmer operates according to the car dimmer setting.
DIM L (Dimmer Level): When you set DIM to ON/AUTO, you can adjust the dimmer level. (-2,-1,0,+1,+2)
For Other setting
Listening to a CD
ON PLAYER
2. Adjust the volume.
ON REMOTE
-
1. Insert a CD.
Rotate the
volume knob
VOLUME
AUX (Auxiliary) ON / OFF
It is possible to use auxiliary equipment with this unit. Activate the auxiliary
setting when using auxiliary equipment connected to this unit.
BEEP 2ND / ALL
BEEP 2ND : The beep is generated when a key is long pressed. (1 sec)
BEEP ALL : The beep is generated when any key is pressed.
Listening to a CD - more you can do
A-EQ(Auto EQ) ON/OFF
AUTO EQ operates only in the music file supported with Genre in the device.
When you set AUTO EQ to ON, POP, CLASSIC, ROCK, or JAZZ is automatically selected according to the music genre.
SW(Subwoofer) OFF / SW 55 Hz / SW 85 Hz / SW 120 Hz
You can enable the subwoofer.
SW OFF <-> SW 55 Hz <-> SW 85 Hz <-> SW 120 Hz.
DEMO OFF/ ON
You can change the initial indication on the display to information name (function name, EQ name, etc...) while listening to a source.
CLK(Clock)
For the model RDS is not supported or even for a RDS supported unit, when
RDS CT information is not received and then you set CT on the setting menu
to OFF, you can adjust the time by yourself. Refer to the page 12 for setting
the CT(Clock Time) ON/OFF.
1. Press and hold b?- or +?B on the player (m or M on remote control) for
about 1 second during playback.
2. Press B[] on the player (B
B/[] on the remote control) at the point you want.
Pausing or restarting CD playback
1. Press B[] on the player (B
B/[] on the remote control) during playback.
2. Press it to resume playback.
Searching for a section within a track / file
Skipping to another track/ file
Press b?- or +?B on the unit (m/M on remote control.).
Or
1. Press the volume knob or ENTER on the remote control.
2. Rotate the volume knob on unit or press v or V on the remote control to
select a desired track or file.
3. Press ENTER (Or the volume knob) to start playback.
Note
To skip to previous track, press briefly b?- within 3 seconds of playing time.
Checking information about your music
MP3/WMA files often come with tags. The tag gives the Title, Artist or Album.
Press DISP repeatedly during MP3/WMA/CD TEXT file playback. If there is no
information, “NO TEXT” will be shown in the display window.
10
CAR CD/MP3/WMA Receiver
You have to set the disc format option to [Mastered] in order to make the discs
compatible with the LG players when formatting rewritable discs.
When setting the option to Live File System, you cannot use it on LG players.
Playing back tracks/files in a way you want
For using easy buttons
1. Press INT/ RPT/ SHF.
2. Press it again to cancel.
(Mastered/Live File System : Disc format system for Windows Vista)
Or
Using the FUNC button
On the Unit
1. Press FUNC.
2. Rotate the volume knob to select an item and press it.
3. Rotate the volume knob to set the option.
4. Press the volume knob to confirm the setting.
If you want to return to the previous step, press .
On the Remote Control
1. Press FUNC/ • MENU.
2. Press v or V to select an item and press it.
3. Press v or V to set the option.
4. Press ENTER to confirm the setting.
If you want to return to the previous step, press
Listening to music from
an external device
1. Connect an external device to
the AUX jack with line input
cable.
.
2. Select a source to AUX.
INT (Intro Scan)
Each files in the current selected folder (
INT) or the first 10 seconds of
each tracks/files (INT) on the disc are played.
RPT (Repeat)
The current selected tracks/files (1 RPT) or folder (
played repeatedly.
Customers should also note that permission is required in order to
download MP3/WMA files and music from the Internet. Our company has
no right to grant such permission. Permission should always be sought
from the copyright owner.
3. Play the connected Auxiliary
Equipment.
4. Adjust the volume.
RPT) on the disc is
SHF (Shuffle)
Each files in the current selected folder (
SHF) or all of the tracks/files
(SHF) on the disc is played randomly. During random playback, even if you
press b?- , you won’t go back to the previous track.
Note
•
: The icon is displayed during MP3/WMA playback.
• MP3/WMA Disc compatibility with this unit is limited as follows:
1. Sampling Frequency / 8 kHz to 48 kHz (MP3) 22.05 kHz to 48 kHz (WMA)
2. Bit rate / within 8 kbps to 320 kbps (include VBR) (MP3)
32 kbps to 320 kbps (WMA)
3. CD-R/CD-RW file system should be “ISO 9660”
4. If you record MP3/WMA files using software which cannot create a FILE
SYSTEM, for example “Direct-CD” etc., it will not be possible to playback
MP3/WMA files. We recommend that you use “Easy-CD Creator” which creates an ISO9660 file system.
ON PLAYER
-
ON REMOTE
-
SRC
SRC
-
-
Rotate the
volume knob
VOLUME
Listening to music from an external device
- more you can do
Preventing radical changes in volume as switching sources
Only when you set AUX to ON as switching sources, you can adjust the volume
level of each source to prevent radical changes in volume by selecting GAIN
LOW or HIGH.
1. Press FUNC on the unit or FUNC/ • MENU on the remote control.
2. Rotate the volume knob on unit or press v or V on the remote control to set
the option(GIN L/H).
3. Press the volume knob on unit or ENTER on the remote conrol to confirm the
setting.
4. If you want to return to the previous step, press
.
CAR CD/MP3/WMA Receiver
11
Adjusting TUNER settings
Listening to the radio
ON PLAYER
ON REMOTE
SRC
SRC
2. Select a band.
BAND
BAND
3. Auto seek.
Manual seek.
b?-/+?B
Press and hold
b?-/+?B
m/M
Press and hold
m/M
1. Select a source to tuner.
Listening to the radio - more you can do
Storing desired frequencies manually
1. Press BAND to select a desired band you want to store.
2. Press and hold b?- or +?B on the unit or m or M on the remote control
until the beep sound is heard.
3. Press it repeatedly to select a desired frequency.
4. Press and hold one of preset buttons among 1 to 6 until the beep sound is heard.
5. Repeat steps 1 to 4 to preset other stations.
Note
• When a station is stored on the preset numbers on which another station of
the same band has already been preset, the previously preset station is automatically erased.
Listening to a preset station
1. Press BAND to select a desired band.
2. Press the volume knob or ENTER on the remote control.
3. Rotate the volume knob or press v or V on the remote control to select a
preset station.
4. Press the volume knob or ENTER on the remote control.
Or
Press BAND and then the desired preset button among 1 to 6.
12
CAR CD/MP3/WMA Receiver
On the Unit
1. Press FUNC.
2. Rotate the volume knob to select an item and press it.
3. Rotate the volume knob to set the option and press it.
4. If you want to return to the previous step, press .
On the Remote Control
1. Press FUNC/ • MENU.
2. Press v or V to select an item and press ENTER.
3. Press v or V to set the option and press ENTER.
4. If you want to return to the previous step, press .
PTY (vrsti programa) (OPTIONAL)
It searches the radio stations by program type of FM tuner in a way as follows;
The program types are displayed as follows.
NEWS
VARIED
LEISURE
JAZZ
AFFAIRS
WEATHER
DOCUMENT
COUNTRY
INFO
FINANCE
POP M
NATION M
SPORT
CHILDREN
ROCK M
OLDIES
EDUCATE
SOCIAL
EASY M
FOLK M
DRAMA
RELIGION
LIGHT M.
CULTURE
PHONE IN
CLASSICS
SCIENCE
TRAVEL
OTHER M
PI (Programme Identification) SOUND/ MUTE (OPTIONAL)
PI SOUND : When the frequency of a tuned station switches to an
AF(Alternative frequency) with an unidentified PI, it keeps the sound.
PI MUTE : When the frequency of a tuned station switches to an AF with an
unidentified PI, it mutes the sound until the PI is identified.
CT (Clock Time) ON/OFF (OPTIONAL)
You can use the RDS CT information to update the time. When RDS CT
information is not received and then you set CT to OFF, you can adjust the
time by yourself. Refer to the page 10 for setting the clock.
TA(Traffic Announcement) ALARM/ SEEK (OPTIONAL)
TA ALARM : When the tuned station has no TP information for 5 seconds,
a double beep sound is output.
TA SEEK : When the tuned station does not receive TP information for 5 seconds, the receiver retunes to the next station that has the TP information.
REG (Region) ON/ OFF (OPTIONAL)
REG ON : The unit switches to another station, within the same network,
broadcasting the same program when the receiving signals from the current
station become weak.
REG OFF : The unit switches to another station, within the same network
when the receiving signals from the current station become weak. (This mode,
the program may differ from the one currently received.)
AF(Alternative frequency) ON/ OFF (OPTIONAL)
When the reception quality drops, the tuner automatically changes to another
station in the network, broadcasting a better reception quality, using the PI
and AF codes.
SENS(Tuner sensitivity) MID/ HI/ LOW
In an area in which signal reception is weak, it helps the tuner to search more
stations. The weaker the reception is, the lower option you should set to.
PS(Preset scan)
Each preset station appears. To cancel, press ENTER (Or the volume knob).
AS (Auto Store)
The six strongest broadcasting frequencies will be stored under preset button 1 to 6
in the order of their signal strength. To cancel, press ENTER (Or the volume knob).
Using an USB device (OPTIONAL)
ON PLAYER
ON REMOTE
1. Open the USB cover.
-
-
2. Connect the USB device.
-
3. Adjust the volume.
Rotate the
volume knob
-
Quick search of a desired file
You can select and play a desird file regardless of the order in USB.
1. Press ENTER (Or the volume knob) to check all files.
2. Rotate the volume knob on unit or press v or V on the remote control to
select a desired file.
3. Press ENTER (Or the volume knob) to start playback.
Note
• Press and hold ENTER (Or the volume knob) to check all folders. Then, repeat
the previous the steps from 1 to 3 for playing a desired file.
• If the USB device is already connected, press SRC (SRC on remote control.)
to select a source to USB.
• Other functions are same with “Listening to a CD - more you can do”.
Refer to page 10.
Look out for the followings
•
•
•
•
Do not extract the USB device while in operation.
For a large capacity USB, it may take longer than a few minute to be searched
To prevent data loss, back up all data.
If you use a USB extension cable or USB hub, the USB device is not recognized.
• Using NTFS file system is not supported. (Only FAT(16/32) file system is
supported.
• External HDD, Card readers, Locked devices, or hard type usb devices are
not supported.
• USB port of the unit cannot be connected to PC. The unit can not be used as
a storage device.
VOLUME
Using an USB device - more you can do
Moving to another drive
When connecting this unit to multi reader, press BAND (BAND on remote control) to go to the next drive. Each time you press the button, the driver modes
changes.
CAR CD/MP3/WMA Receiver
13
Troubleshooting
Symptom
General
Power doesn’t turn on/
The unit doesn’t operate.
Cause
Leads and connectors are not properly.
The fuse is blown.
CD
Radio
Noise and other factors are causing the builtin microprocessor to operate incorrectly.
No sound is heard / The vol- Cables are not connected correctly.
ume level will not rise.
This unit is not firmly secured.
There’s audio skipping.
The disc is dirty.
The playback is not
possible.
The loaded disc is of a type this unit cannot
play.
The signal strength of the stations is too
Radio stations cannot be
weak(when tuning in with automatic tuning.)
tuned in.
No station has been preset or preset stations
have been cleared(when tuning by scanning
preset stations.)
Remote
control
14
The unit does not operate
Battery power is low.
correctly even when the
appropriate remote
control buttons are pressed.
CAR CD/MP3/WMA Receiver
Correction
Confirm once more that all connections are
correct.
Rectify the problem that caused the fuse to
blow, and then replace it. Be very sure to
install the correct fuse with the same rate.
Turn the unit off and then on.
Connect the cables correctly.
Secure this unit firmly.
Clean the disc.
Check what type the disc.
Tune in the stations manually.
Preset the stations.(Refer to the page 12)
Load a new battery.
Specifications
General
Output Power
Power Source
Speaker impedance
Ground System
Dimensions (W x H x D)
Net Weight
Tuner
FM
Frequency Range
S/N Ratio
Distortion
Usable Sensitivity
AM (MW)
Frequency Range
S/N Ratio
Distortion
Usable Sensitivity
CD
Frequency Response
S/N Ratio
Distortion
Channel Separation (1 kHz)
AUX
Frequency Response
S/N Ratio
Distortion
Channel Separation (1 kHz)
Max Input Level (1 kHz)
USB
Version
Line OUT
Frequency Response
Output Voltage
Subwoofer (optional)
Frequency Response
Output Voltage
53 W x 4 CH (Max.)
DC 12 V
4Ω
Negative
178 x 50 x 169 mm (Without Control Panel)
1.37 kg
87.5 MHz to 107.9, 87.5 MHz to 108 MHz,
65 MHz to74 MHz, or 87.5 MHz to 108 MHz
55 dB
0.7 %
12 dBµV
520 MHz to 1720 or 522 MHz to 1620 kHz
50 dB
1.0 %
28 dBµV
20 Hz to 20 kHz
80 dB
0.12 %
55 dB
20 Hz to 20 kHz
80 dB
0.1 %
45 dB
1.1 V
USB 1.1
20 Hz to 20 kHz
2 V (Max.)
20 Hz to 120 Hz
2.0 V (Max.)
Designs and specifications are subject to change without notice.
CAR CD/MP3/WMA Receiver
15
Download PDF