Cables - Test Equipment Depot
Cables
ACCESSORIES
LENGTH
Description
Type
From
To
m
ft
USE WITH:
236-ILC-3
Safety Interlock
Shielded twisted pair
3-pin round
3-pin round
3
10
237-ALG-2
Low Noise Input
Triax
3-slot male triax
Alligator clips (3)
2
6.6
237-ALG-15
Low Noise Input
Triax
3-slot male triax
Alligator clips (3)
15
50
4200-SCS, 8007, 8008
Series 2200, Series 2600B, 4200-PA, 6220,
6221, 6482, 6487, 6514, 6517A, 6517B
Series 2200, Series 2600B, 4200-PA, 6220,
6221, 6482, 6487, 6514, 6517A, 6517B
2000-MTC-2
Cable Assembly
DB44 female
Unterminated
2
6.6
2000-20
2000-MTCD-2
Cable Assembly
DB44 female
DB50 male
2
6.6
2000-SCAN-20
2107-4
Input Cable
Shielded twisted pair
Shielded multiple
conductors
Shielded twisted pair
LEMO
Copper spade lugs (4)
1.2
4
2107-30
Input Cable
Shielded twisted pair
LEMO
Copper spade lugs (4)
9.1
30
2182A, Series 2200
2107-50
Input Cable
Shielded twisted pair
LEMO
Copper spade lugs (4)
15
50
2182A, Series 2200
2260-005
Input Cable
0.5
1.6
Series 2260B
2260-006
Input Cable
0.5
1.6
Series 2260B
2260-007
Input Cable
0.5
1.6
Series 2260B
2290-5-SHV
Input Cable
3
10
2290-5-MHV
Input Cable
3
10
2290-10-SHV
2290-10-SHVUC
2290-INT-CABLE
2450-TRX-BAN
2600-ALG-2
2651A-KIT-1
2651A-KIT-2
2651A-KIT-3
3720-MTC-1.5
3720-MTC-3
3721-MTC-1.5
3721-MTC-3
3722-MTC-1.5
3722-MTC-1.5/MM
3722-MTC-3
3722-MTC-3/MM
3732-MTC-1.5
3732-MTC-3
4200-MTRX-1
4200-MTRX-2
4200-MTRX-3
4200-PRB-C
4200-RPC-0.3
4200-RPC-2
4200-RPC-3
4200-RPC-6
4200-TRX-0.3
4200-TRX-1
4200-TRX-2
4200-TRX-3
4801
4802-10
4803
6011
6011-10
6517-ILC-3
6517B-ILC-3
7009-5
7011-MTC-1
7011-MTC-2
Input Cable
3
10
3
10
3.05
10
0.3
2
1
2
3
1.5
3
1.5
3
1.5
1.5
3
3
1.5
3
1
2
3
1
6.6
3.3
6.6
10
5
10
5
10
5
5
10
10
5
10
3.2
6.5
9.8
0.3
2
3
6
0.3
1
2
3
1.2
3
15.2
1.5
3
1
1
1.5
1
2
1
6.5
9.8
19.6
1ft
3.2
6.5
9.8
4
10
50
5
10
3.3
3.3
5
3.3
6.6
2290-5, 2290-5-SHVBH
2290-5
2290-10, 2290-10-SHVBH
2290-10
2290-5, 2290-10
2450
2635B, 2636B, 4200-PA
2651A, 8011
2651A, 8011
2651A, 8011
3720, 3723, 3724
3720, 3723, 3724
3721, 3730, 3731, 3740, 3750
3721, 3730, 3731, 3740, 3750
3722
3722
3722
3722
3732
3732
4200-SCS
4200-SCS
4200-SCS
4200-PIV, 4210-CVU
4200-PA
4200-PA
4200-PA
4200-PA
4200-PA
4200-PA
4200-PA
4200-PA
6482, 6485, 7158
6482, 6485, 7158
6482, 6485, 7158
Instruments with 2-slot triax connectors
Instruments with 2-slot triax connectors
6517A, 8009
6517B, 8009
All RS-232 capable instruments
7011-C, 7012-C, 7013-C, 7015-C, 7018-C
7011-C, 7012-C, 7013-C, 7015-C, 7018-C
7019C-MTCI-2
2
6.6
Series 2400
Interlock Cable
Adapter Cable
Low Noise Input
Cable Assembly
Cable Assembly
Cable Assembly
Mass Terminated Assembly
Mass Terminated Assembly
Mass Terminated Assembly
Mass Terminated Assembly
Mass Terminated Assembly
Mass Terminated Assembly
Mass Terminated Assembly
Mass Terminated Assembly
Mass Terminated Assembly
Mass Terminated Assembly
Ultra Low Noise
Ultra Low Noise
Ultra Low Noise
Cable Assembly
Cable Assembly
Cable Assembly
Cable Assembly
Cable Assembly
Ultra Low Noise
Ultra Low Noise
Ultra Low Noise
Ultra Low Noise
Low Noise Input
Low Noise Input
Low Noise Cable Kit
Input Leads
Input Leads
4-pin Interlock Cable
Interlock Cable
Shielded RS-232
Mass Terminated Assembly
Mass Terminated Assembly
Coax
Coax
Coax
Coax
3-conductor
Triax
Triax
Coax
Coax
Coax
Twisted pair
Twisted pair
Twisted pair
Twisted pair
Twisted pair
Twisted pair
Twisted pair
Twisted pair
Twisted pair
Twisted pair
SMU triax
SMU triax
SMU triax
Y adapter cable
Remote PreAmp
Remote PreAmp
Remote PreAmp
Remote PreAmp
PreAmp triax
PreAmp triax
PreAmp triax
PreAmp triax
Coax
Coax
Coax
Triax
Triax
Shielded
Shielded
Shielded
Twisted pair (45)
Twisted pair (45)
SHV Female
SHV Female
SHV Male
SHV Male
3-pin
3-slot male triax
3-slot male triax
2-pin plug
2-pin plug
2-pin plug
D-sub female
D-sub female
D-sub female
D-sub female
D-sub male
D-sub male
D-sub male
D-sub male
D-sub female
D-sub female
Miniature male
Miniature male
Miniature male
Female SMA
DB15
DB15
DB15
DB15
3-slot male
3-slot male
3-slot male
3-slot male
Male BNC
Male BNC
Male BNC (10)
2-slot male triax
2-slot male triax
4-pin female DIN
4-pin Phoenix
Male DB-9
96-pin female
96-pin female
Kelvin Instrument Cable
Shielded twisted pair
Card connector
Input Cable
99 Washington Street
Melrose, MA 02176
Phone 781-665-1400
Toll Free 1-800-517-8431
Visit us at www.TestEquipmentDepot.com
SHV Female
MHV Male
SHV Male
Unterminated
Unterminated
Banana input jack
Alligator clips (3)
2-pin plug
2-pin plug
2-pin plug
78-pin D-sub male
78-pin D-sub male
50-pin D-sub male
50-pin D-sub male
104-pin D-sub female
104-pin D-sub male
104-pin D-sub female
104-pin D-sub male
78-pin D-sub male
78-pin D-sub male
3-slot male
3-slot male
3-slot male
2 female SSMC
DB15
DB15
DB15
DB15
3-slot male
3-slot male
3-slot male
3-slot male
Male BNC
Unterminated
Female BNC (5)
Alligator clips (3)
Alligator clips (3)
4-pin female DIN
4-pin DIN
Female DB-9
96-pin female
96-pin female
Shielded banana plug
cables (6)
2182A
A Greater Measure of Confidence
A Tektronix Company
Cables
Cables
TERMINATIONS
Model
Cables
LENGTH
Description
Type
From
To
m
ft
7020-MTC-2
Mass Terminated Assembly
Twisted pair (45)
96-pin female
96-pin female
2
6.6
7024-3
Low Noise
Triax
2-slot male triax
2-slot male triax
0.9
3
USE WITH:
7020
Instruments with 2-slot triax connectors
7024-10
Low Noise
Triax
2-slot male triax
2-slot male triax
3
10
Instruments with 2-slot triax connectors
7025-10
Low Noise Input
Triax
2-slot male triax
Unterminated
3
10
Instruments with 2-slot triax connectors
7035-MTC-2
Mass Terminated Assembly
Twisted pair (45)
96-pin female
96-pin female
2
6.6
7035
7036-MTC-2
Mass Terminated Assembly
Twisted pair (45)
96-pin female
96-pin female
2
6.6
7036
1.8
6
707A
BNC Interconnect
Coax
BNC
BNC
707A Master/Slave
Twisted pair (9) 8-pin DIN
8-pin DIN
2015, 2016, 3390
7078-MTC-5
Mass Terminated Assembly
Twisted pair (12)
38-pin connector
38-pin connector
1.5
5
7071, 7071-4, 7074-D
7078-MTC-20
Mass Terminated Assembly
Twisted pair (12)
38-pin connector
38-pin connector
6.1
20
7071, 7071-4, 7074-D
7078-TRX-1
Low Noise
Triax
3-slot male triax
3-slot male triax
0.3
1
2635B, 2636B, 6482, 6487, 6514, 6517A, 6517B, 7072, 7174A
7078-TRX-3
Low Noise
Triax
3-slot male triax
3-slot male triax
0.9
3
2635B, 2636B, 6482, 6487, 6514, 6517A, 6517B, 7072, 7174A
7078-TRX-5
Low Noise
Triax
3-slot male triax
3-slot male triax
1.5
5
2635B, 2636B, 6482, 6487, 6514, 6517A, 6517B, 7072, 7174A
7078-TRX-10
Low Noise
Triax
3-slot male triax
3-slot male triax
3
10
2635B, 2636B, 6482, 6487, 6514, 6517A, 6517B, 7072, 7174A
7078-TRX-12
Low Noise
Triax
3-slot male triax
3-slot male triax
4
12
2635B, 2636B, 6482, 6487, 6514, 6517A, 6517B, 7072, 7174A
7078-TRX-20
Low Noise
Triax
3-slot male triax
3-slot male triax
6.1
20
2635B, 2636B, 6482, 6487, 6514, 6517A, 6517B, 7072, 7174A
7078-TRX-6IN
Low Noise
Triax
3-slot male triax
3-slot triax
0.15
0.5
6430
7152-MTC-2
Low Noise Matrix Expansion Triax (5)
6-pin M-series coax 6-pin M-series coax
0.6
2
7152
7152-MTC-10
Low Noise Matrix Expansion Triax (5)
6-pin M-series coax 6-pin M-series coax
3
10
7152
Cables
7051-*
7078-DIN
7152-TRX-10
Low Noise M-Series to Triax
Triax (5)
M-series connector 3-slot triax (5)
3
10
7152, 8006
7153-TRX
Low Noise M-Series to Triax
Triax (5)
M-series connector 3-slot triax (5)
2
6
7153
7173-50-CSEP
4-cable Set
Coax
SMB female
BNC male
0.6
2
7705-MTC-2
Mass Terminated Assembly
Twisted pair (25)
D-sub male
D-sub female
2
6.6
7703, 7705, 7707, 7709
0.15
0.5
7711
1
3.3
7711, 7712, System 46, System 46T
0.9
3
Instruments with 2-slot BNC connectors
3
10
8007
1.8
6
2500, Series 2400, System 25, 8544, 8544-TEC
7711-BNC-SMA
5 SMA to BNC Cables
Coax
SMA Male
BNC Female
7712-SMA-1
SMA Cables
Coax
SMA Male
SMA Male
7754-3
BNC
Coax
BNC Male
Alligator clips
8007-GND-3
Safety Ground Wire
Single wire
Crimp lug
Crimp lug
8542-301
LIV Cable
Multiple conductor
DB9 female
Multiple terminations:
Triax (2500), 2 dual
bananas (24XX) GND wire
7173-50
8607
1kV Test Cables
Single wire (2)
Safety banana
Safety banana
1
3.3
CA-18-1
Shielded
Coax
Dual banana plug
Dual banana plug
1.2
4
Bind­ing post inputs
CA-19-2
CA-126-1A
RG58
Digital I/O
RG58
Shielded
BNC male
DB25 male
BNC male
DB25 female
1.5
1.5
5
5
Series 2600B, Series 3700A
CA-180-3A
Crossover Cable
Twisted pair
RJ45
RJ45
3
10
Series 2600B, 2701, 3390, Series 3700A,
6221, all TSP-enabled instruments
CA-321-1
Temperature Control Cable
Multiple conductor
DB15 female
1.8
6
2510, 8544
CA-322-1
Dual Temperature Control
Cable
Multiple conductor
DB15 female
1.8
6
2510, 8544, 8544-TEC
CA-404B
CA-405B
CA-406B
CA-446A
CA-447A
CA-451A
CA-452A
CA-557-1A
CA-557-2A
CA-557-3
RG188
RG188
RG188
Cable Assembly
Cable Assembly
RG188
RG188
Cable Assembly
Cable Assembly
Cable Assembly
Coax
Coax
Coax
Coax
Coax
Coax
Coax
Multiple conductor
Multiple conductor
Multiple conductor
SMA male
SMA male
SMA male
SMA male
SMA male
SMA male
SMA male
8-pin receptacle
8-pin receptacle
8-pin receptacle
SMA male
SMA male
SMA male
SMA male
SMA male
SMA male
SMA male
8-pin receptacle
8-pin receptacle
8-pin receptacle
2
0.15
0.33
3
1.5
0.108
0.203
1
2
3
CA-558-x
Interlock Cable
Twisted pair (2)
25-pin D-sub
3-pin
1, 2, 3
CA-559-0A
CA-559-2A
CA-560-0A
CA-560-2A
CA-561-0A
CA-561-2A
Black Banana Jumper
Red Banana Jumper
Banana Plug Jumper Cable
Banana Plug Jumper Cable
Black Banana Jumper
Red Banana Jumper
Jumper
Jumper
Jumper
Jumper
Jumper
Jumper
Banana
Banana
Banana
Banana
Banana
Banana
Banana
Banana
Banana
Banana
Banana
Banana
0.102
0.102
0.203
0.203
0.203
0.203
6.5
0.5
1.08
9.8
5
0.35
8 in.
3.3
6.6
10
3.3, 6.6,
10
4 in.
4 in.
8 in.
8 in.
8 in.
8 in.
8-position Phoenix
(CS-846 equivalent)
Y cable to two 8-position
Phoenix (CS-846)
2410, 6487, 6517A, 6517B
4200-SCS
4200-SCS
4200-SCS
4200-SCS
4210-CVU
4210-CVU
4200-SCS
4200-SCS
2651A, 8011
2651A, 8011
2651A, 8011
Series 2600B, 2657A
ACCESSORIES
Cables
TERMINATIONS
Model
8010
8010
8010
8010
8010
8010
A Greater Measure of Confidence
A Tektronix Company
Cables
TERMINATIONS
CA-562-0B
CA-562-2B
Black Safety Banana Plug
Jumper Cable
Red Safety Banana Plug
Jumper Cable
BNC to Banana Jumper
Black Banana Jumper
Red Banana Jumper
Protective Earth Ground
Type
From
To
Jumper
Banana
Jumper
Jumper
Jumper
Jumper
Safety
LENGTH
m
ft
Banana
0.254
10 in.
8010
Banana
Banana
0.254
10 in.
8010
BNC
Banana
Banana
Eye lug
Banana
Banana
Banana
Eye lug
0.241
0.203
0.203
0.3, 0.45, 3
0.5, 1,
2, 3
9.5 in.
8 in.
8 in.
1, 1.5, 10
1.6, 3.3,
6.6, 10
8010
8010
8010
8010
0.15
0.5
0.30
1.0
HV-CA-554-x
3kV Rated
High voltage
Triax
Triax
HV-CA-571-3
S46-SMA-0.5
S46-SMA-1
SC-9
SC-22
SC-93
SC-182
SC-200A
SC-206
High Voltage
SMA Cable
SMA Cable
Low Noise
Low Noise
Low Thermal
Low Inductance
General Purpose
High Current Coax Cable
Triax
Coax
Coax
Coax
Triax
Shielded
Coax
Shielded twisted pair
Coax
Triax
SMA Male
SMA Male
Unterminated
Unterminated
Unterminated
Unterminated
Unterminated
Unterminated
Unterminated
SMA Male
SMA Male
Unterminated
Unterminated
Unterminated
Unterminated
Unterminated
Unterminated
SHV-CA-553-x
3kV Rated
High voltage
Triax
SHV
USB-B-1
USB Cable
Coax
USB Type A
USB Type B
USE WITH:
8010, 2657A
2657A
7711, 7712, System 46, System 46T
7711, 7712, System 46, System 46T
Sold by the foot
Sold by the foot
CS-631
Sold by the foot
2182-KIT
Sold by the foot
2302, 2303, 2303-PJ, 2304A, 2306, 2306-PJ
Sold by the inch
Series 2600B
Sold by the inch
2651A
1, 2,
3
1
Model 236-ILC-3 Safety Interlock Cable:
Designed to connect the lid interlock circuit of
the Models 8007 and 8008 test fixtures to the
interlock circuit of the Model 237 SMU and 486
and 487 Picoammeters.
Model 237-ALG-*: Low noise triax cable (SC-22)
terminated with a 3-slot male triax connector on
one end and 3 alligator clips on the other.
237-ALG-2 2m (6.6 ft) length
237-ALG-15 15m (50 ft) length
For use with: 4200-SCS, 8007, 8008
For use with: Series 2200, Series 2600B,
4200-PA, 6220, 6221, 6487, 6514, 6482,
6517A, 6517B
3.3, 6.6,
10
3.3
2657A 2100, Series 2200, 3390, Series 3700A, Series 2600, 2450 Model 2000-MTC-2 Cable Assembly: 2-meter
cable with a 44-pin connector on one end that is
designed to mate with the 2000-20 scanner card.
The other end is unterminated for direct connection to measurement fixtures or devices.
For use with: 2000-20
ACCESSORIES
Cables
CA-563C
CA-567-0A
CA-567-2A
CA-568-XA
Description
Cables
Model
A Greater Measure of Confidence
A Tektronix Company
Cables
Model 2290-5-SHV: 3m (10 ft) of RG-8A/U
coaxial cable terminated with a SHV female
connector on both ends. Maximum operating
voltage is 5000Vrms. Characteristic cable impedance is 50Ω.
For use with: 2290-5
Model 2260-005: Cable, 0.5m (1.6 ft.), to
connect two Series 2260B power supplies
in series.
Cables
Model 2000-MTCD-2 Cable Assembly: 2-meter
cable with a 44-pin connector on one end that
is designed to mate with the 2000-SCAN-20
scanner card. The other end is equipped with a
50-pin D-sub male connector.
For use with: 2000-SCAN-20
Model 2260-006: Cable, 0.5m (1.6 ft.), to
connect two Series 2260B power supplies
in parallel.
Model 2290-10-SHV: 3m (10 ft) of RG-213/U
coaxial cable terminated with a SHV male connector on both ends. Maximum operating voltage is 10,000Vrms.
For use with: 2290-10, 2290-10-SHVBH
For use with: Series 2260
Model 2107-* Low-Thermal Input Cables with
Spade Lugs: An input cable terminated with a
LEMO connector on one end and four copper
spade lugs on the other.
2107-4 1.2m (4 ft) length
2107-30 9.1m (30 ft) length
2107-50 15m (50 ft) length
For use with: 2182A, Series 2200
Model 2260-007: Cable, 0.5m (1.6 ft.), to
connect three Series 2260B power supplies
in parallel.
For use with: Series 2260
Model 2290-5-MHV: 3m (10 ft) of RG-8A/U
coaxial cable terminated with a SHV female connector on one end and a MHV male connector
on the other end. Maximum operating voltage
is 5000Vrms. Characteristic cable impedance
is 50Ω.
Model 2290-10-SHVUC: 3m (10 ft) of RG-213/U
coaxial cable terminated with a SHV male connector on one end and unterminated cable on
the other end. Maximum operating voltage is
10,000Vrms.
For use with: 2290-10
ACCESSORIES
Cables
For use with: Series 2260
For use with: 2290-5
A Greater Measure of Confidence
A Tektronix Company
Model 2290-INT-CABLE: Safety interlock cable,
3.05m (10 ft). 3-conductor cable with 3-pin connector on one end and unterminated wires on
the other end.
For use with: 2290-5, 2290-10
Model 2651A-KIT-*: High current, low impedance, coaxial cable assembly.
2651A-KIT-1: 1m (3.3 ft).
2651A-KIT-2: 2m (6.6 ft).
2651A-KIT-3: 3m (10 ft).
For use with: 3722
For use with: 2651A, 8011
Model 3720-MTC-*: 78-pin D-sub female to
78-pin D-sub male cable.
3720-MTC-1.5: 1.5m (5 ft) length
3720-MTC-3: 3m (10 ft) length
Model 2450-TRX-BAN: For adapting the Model
2450’s rear panel triaxial connectors to banana
jack inputs. Length: 0.3m (1 ft).
Model 3722-MTC-*: 104-pin D-sub male to
104-pin D-sub female cable.
3722-MTC-1.5: 1.5m (5 ft) length
3722-MTC-3: 3m (10 ft) length
Cables
Cables
Cables
Model 3722-MTC-*/MM: 104-pin D-sub male to
104-pin D-sub male cable.
3722-MTC-1.5/MM: 1.5m (5 ft) length
3722-MTC-3/MM: 3m (10 ft) length
For use with: 3722
For use with: 3720, 3723, 3724
For use with: 2450
ACCESSORIES
Model 3732-MTC-*: 78-pin D-sub female to
78-pin D-sub male cable.
3732-MTC-1.5: 1.5m (5 ft) length
3732-MTC-3: 3m (10 ft) length
Model 3721-MTC-*: 50-pin D-sub female to
50-pin D-sub male cable.
3721-MTC-1.5: 1.5m (5 ft) length
3721-MTC-3: 3m (10 ft) length
For use with: 3732
For use with: 3721, 3730, 3731, 3740, 3750
Model 2600-ALG-2: 2m (6.6 ft) cable terminated
with a 3-slot male triax connector on one end
and 3 alligator clips on the other.
For use with: 2635B, 2636B, 4200-PA
A Greater Measure of Confidence
A Tektronix Company
Model 4200-RPC-*: Remote PreAmp cable
terminated at each end with a high density
DB15 connector. This cable connects a Model
4200-SMU or 4210-SMU source measurement
unit installed in a Model 4200-SCS to a remotely
mounted Model 4200-PA PreAmp.
4200-RPC-0.3: 0.3m (1 ft) (for use inside prober
shield)
4200-RPC-2: 2m (6.5 ft) (one included with each
4200-PA)
4200-RPC-3: 3m (9.8 ft)
4200-RPC-6: 6m (19.6 ft)
Model 4801 Input Cable: Low noise coax cable,
1.2m (48 in) in length, with male BNC con­nec­
tors on each end.
For use with: 6482, 6485, 7158
Cables
Model 4200-MTRX-*: Ultra low noise SMU triax
cable is terminated with a miniature male triax
connector on one end and a standard 3-slot
male triax connector on the other end. This
cable connects a Model 4200-SMU or 4210-SMU
source measurement unit installed in a Model
4200-SCS to a test fixture. (4200-MTRX-* cables
are intended only for connection to an SMU that
does not have a 4200-PA PreAmp installed.)
4200-MTRX-1: 1m (3.2 ft)
4200-MTRX-2: 2m (6.5 ft) (two included with
each 4200-SCS SMU not configured with a
4200-PA Remote PreAmp)
4200-MTRX-3: 3m (9.8 ft)
For use with: 4200-PA
For use with: 4200-SCS
Model 4802-10: 3m (10 ft) of low noise coax
cable with male BNC connector at one end and
unterminated at the other.
For use with: 6482, 6485, 7158
Model 4200-PRB-C: SMA to SSMC Y adapter
cable with local ground that connects the
4200-PIV package to DC probe manipulators.
The cable is terminated at one end with a single female SMA. The other end splits into two
gold SSMC plugs (female connectors) and a
black wire with integrated connector, which is
used to connect to the shield of another Model
4200-PRB-C cable.
For use with: 4200-PIV, 4210-CVU
Model 4200-TRX-*: Ultra low noise PreAmp
triax cable terminated with a standard 3-slot
male triax connector on each end. This cable
connects a Model 4200-PA PreAmp option
installed in the Model 4200-SCS to the
test ­fixture.
4200-TRX-0.3: 0.3m (1 ft) (recommended for
remote location of the 4200-PA)
4200-TRX-1: 1m (3.2 ft)
4200-TRX-2: 2m (6.5 ft) (two included with each
Model 4200-PA)
4200-TRX-3: 3m (9.8 ft)
For use with: 4200-PA
Model 4803 Low Noise Cable Kit: In­cludes
15m (50 ft) of low noise coax cable, 10 male BNC
con­nec­tors, and 5 female BNC chassis-mount
connectors.
For use with: 6482, 6485, 7158
A Greater Measure of Confidence
A Tektronix Company
ACCESSORIES
Cables
Cables
Cables
2 Slot Triax
Model 6011 2-slot Triax Cable: 1.5m (5 ft) of
tri­a x cable (SC-22) ter­mi­nat­ed with a 2-slot triax
plug on one end and three alligator clips on the
other. Also available in 3m (10 ft) length (Model
6011-10).
For use with instruments with 2-slot triax
connectors
Model 7009-5 Shielded RS-232 Cable: 1.5m
(5 ft) RS-232 cable with a male DB-9 connector
at one end and a female DB-9 connector on the
other end. Wired as a straight through, not as a
null modem cable.
For use with: All RS-232 capable instruments
207
Model 7019C-MTCI-2 6-wire Kelvin ­Ex­tend­­er
and Instru­­ment Cable: Used with Model
7019-C 6-Wire Ohms Matrix Card and a
SourceMeter SMU instrument. The Source­­Meter
cables are 0.6m (2 ft) long and the DUT cables
are 2m (6.6 ft) long. The cable set is used in a
basic system to test a resistor network.
For use with: Series 2400 SourceMeter SMU
Instruments
Model 6517-ILC-3 Interlock Cable: De­sign­ed to
connect the Interlock of the 6517A with the 8009
test fixture. Configuring the 6517A with the 8009
test fixture results in all the elec­trode constants
already being programmed into the unit.
ACCESSORIES
For use with: 6517A Electrometer, 8009
Model 7011-MTC-x: Mass terminated cable
assembly for connection to 7011-C and other
switching cards. The cable has 45 pairs with
outer shield. The cable is terminated at each
end with 96-pin female DIN connectors with
strain relief.
7011-MTC-1 1m (3.3 ft)
7011-MTC-2 2m (6.6 ft)
Model 6517B-ILC-3 Interlock Cable: De­sign­ed
to connect the interlock of the 6517B with the
8009 test fixture. Configuring the 6517B with the
8009 test fixture results in all the elec­trode constants already being programmed into the unit.
Model 7020-MTC-2: 2m (6.6 ft) mass terminated cable assembly for connection to 7020. The
cable has 45 pairs with outer shield. The cable is
terminated at each end with 96-pin female DIN
connectors with strain relief.
For use with: 7020
For use with: 7011-C, 7012-C, 7013-C, 7015-C,
7018-C, 7022
For use with: 6517B Electrometer, 8009
A Greater Measure of Confidence
A Tektronix Company
Cables
Cables
Cables
For use with instruments with 2-slot triax
connectors
Model 7035-MTC-2: 2m (6.6 ft) mass terminated cable assembly for connection to 7035. The
cable has 45 pairs with outer shield. The cable is
terminated at each end with 96-pin female DIN
connectors with strain relief.
Model 7051-*: General purpose BNC to BNC
cable (G-58C).
7051-2 0.6m (2 ft)
7051-5 1.5m (5 ft)
7051-10 3m (10 ft)
For use with: 2015, 2016, 3390, 7711, some
instrument external trigger I/O lines
Cables
Model 7024-* 2-slot Triax Cable: Low noise
triax cable (SC-22) with 2-slot male triax connectors on each end.
7024-3 0.9m (3 ft)
7024-10 3m (10 ft)
For use with: 7035
2 Slot Triax
Model 7025-10 2-slot Triax Cable: 3m (10 ft)
low noise triax input cable (SC-22) terminated
on one end with 2-slot male triax connector.
Model 7078-DIN: This 1.8m (6 ft) cable ac­ces­
sory connects between Model 707A main­frames
when operated as one unit in Master/Slave
mode. One cable is required for each mainframe.
For use with instruments with 2-slot triax
connectors
For use with: 707A
Model 7036-MTC-2: 2m (6.6 ft) mass terminated cable assembly for connection to 7036. The
cable has 45 pairs with outer shield. The cable is
terminated at each end with 96-pin female DIN
connectors with strain relief.
For use with: 7036
ACCESSORIES
Cables
2 Slot Triax
A Greater Measure of Confidence
A Tektronix Company
Cables
Model 7078-MTC-5: 1.5m (5 ft) mass terminated
cable for connection to column inputs (7071 and
7071-4). Also used for matrix expansion (7071,
7071-4, or 7074). The cable has 12 sets of shielded
twisted pair wires for isolation of critical circuits
and noise rejection in the system. The cable is terminated at each end in a 38-pin connector block
with strain relief. Model 7078-MTC-20 can be
used as is or cut in half to make two 10 ft cables.
Model 7078-TRX-6IN 3-slot Triax Cable: 0.15m
(6 inch), 3-slot, low-noise, guarded triax cable that
minimizes leakage current and input capacitance
when used with the Model 6430 Remote PreAmp
(lower noise than 1 foot or longer versions).
For use with: 6430
Model 7152-TRX-10: Set of five 3m (10 ft) low
noise triax cables terminated at one end in a
single M-series connector block and at the other
end in 3-slot triax connectors. This cable is most
useful for direct connection to electrometers
and Source/Measure Units.
For use with: 7152, 8006
For use with: 7071, 7071-4, 7074-D
3 Slot Triax
ACCESSORIES
­
Model 7078-TRX-* 3-slot Triax Cables: Low
noise triax cables terminated at both ends in
3-slot male triax connectors.
7078-TRX-1 0.3m (1 ft)
7078-TRX-3 0.9m (3 ft)
7078-TRX-5 1.5m (5 ft)
7078-TRX-10 3.0m (10 ft)
7078-TRX-12 3.5m (12 ft)
7078-TRX-20 6.0m (20 ft)
Model 7152-MTC-*: Five low noise triax cables
terminated in 6-position M-series coax connector blocks. Provides quick connection between
7152 matrix cards and is compatible with Model
7152-MTR connector. Also available in 3m (10 ft)
length for connection between the matrix and
the device under test.
7152-MTC-2 0.6m (2 ft)
7152-MTC-10 3.0m (10 ft)
For use with: 7152
Model 7153-TRX: 2m (6.6 ft) low noise cable
assembly with M-series connector at one end for
row or column connections to the 7153, and five
3-slot male triax connectors at the other end.
Two 7153-TRX cable assemblies are required to
make all connections to the 7153 card.
For use with: 7153
For use with: 2635B, 2636B, 6220, 6221, 6482,
6487, 6514, 6517A, 6517B, 7072, 7174A
A Greater Measure of Confidence
A Tektronix Company
Cables
Cables
3 Slot Triax
Cables
For use with: 7173-50
For use with: 7701, 7707, 7709
Model 7754-3 BNC to Alligator Cable: 0.9m
(3 ft) terminated on one end with a BNC plug
and on the other with two alligator clips.
For use with instruments with 2-slot BNC
connections
Cables
Model 7173-50-CSEP: The 7173-50-CSEP cable
set provides the capability to expand a switching
configuration to include more than one 7173-50.
Each set contains four 0.6m (25 in) cables. One
cable is required to expand each row or column
connection between adjacent cards. For example, using two 7173-50 cards to create a 4×24
matrix would require connecting the rows of
two adjacent cards together. One 7173-50-CSEP
set has enough cables to do this. Connecting the
12 columns together on two adjacent cards creates an 8×12 matrix. This would require three
7173-50-CSEP sets, 12 cables.
Model 7711-BNC-SMA: Male SMA to female
BNC cables (5 each), 0.15m (0.5 ft) in length.
For use with: 7711
Model 8007-GND-3: Safety ground wire, 3m
(10 ft).
For use with instruments with a safety
ground connector
Model 7705-MTC-2: 2m (6.6 ft) 50-conductor
male to female D-sub cable assembly.
For use with: 7703, 7705, 7707, 7709, 7701
Model 7712-SMA-1: SMA cable, male to male,
1m (3.3 ft).
For use with: 7711, 7712, System 46,
System 46T
Model 8542-301: 1.8m (6 ft) LIV test system
cable.
For use with: Series 2400, 2500, System 25,
8544, 8544-TEC
A Greater Measure of Confidence
A Tektronix Company
ACCESSORIES
Cables
Model 7707-MTC-2: 2m (6.6 ft) 25-conductor
male to female D-sub cable assembly.
Cables
Item shipped may
vary from model
­pictured here.
CA-126-1A Digital I/O Cable: 1.5m (5 ft) of
cable, from DB25 male to DB25 female.
For use with: 4200-SCS, System 46,
System 46T
Cables
Cables
For use with: Series 2600B, Series 3700A
Model 8607 1kV Source Banana Cable Set:
The 8607 cable set is made up of one red and
one black high voltage test lead with fixed safety
banana plug ends. The leads are 1 meter (3.3 ft)
long and have a voltage rating of 1500V DC.
CA-404B: 2m (6.5 ft) RG188 coax cable terminated with an SMA male plug on each end, 50W
impedance.
For use with: 2410, 6487, 6517A, 6517B
CA-180-3A: 3m (10 ft), CAT5 crossover cable for
Ethernet or TSP-Link.
For use with: Series 2600B, 2701, 3390,
Series 3700A, 6221, all TSP-Link enabled
instruments
Item shipped may vary from
model ­pictured here.
CA-405B: 15cm (6 in) RG188 coax cable terminated with an SMA male plug on each end, 50W
impedance.
For use with: 4200-SCS
CA-18-1: 1.2m (4 ft) shielded cable te­r­­m­i­nat­ed
with a dual banana plug on each end. For use
with binding post inputs or dual banana jacks.
For use with: Binding post inputs
CA-321-1: Temperature control cable.
For use with: 2510, 8544
CA-406B: 33cm (13 in) RG188 coax cable terminated with an SMA male plug on each end, 50W
impedance.
For use with: 4200-SCS
ACCESSORIES
CA-19-2: 1.5m (5 ft) RG58 cable terminated with
a BNC male plug on each end.
For use with: 4200-SCS
CA-322-1: Dual temperature control cable.
For use with: 2510, 8544, 8544-TEC
A Greater Measure of Confidence
A Tektronix Company
CA-559-0A and CA-559-2A: Banana to banana
jumper (102mm).
For use with: 4200-SCS
For use with: 2600-PCT-x, 4200-PCT-x, 8010
For use with: 4210-CVU
CA-560-0A and CA-560-2A: Banana to banana
jumper (203mm).
Cables
CA-446A: 3m (9.8 ft) coax cable terminated
with an SMA male plug on each end, 100W
­impedance.
CA-452A: 20.4cm (8 in) RG188 coax cable terminated with an SMA male plug on each end, 50W
impedance.
For use with: 2600-PCT-x, 4200-PCT-x, 8010
CA-561-0A and CA-561-2A: Banana to banana
jumper (305mm).
CA-447A: 1.5m (4.9 ft) coax cable terminated
with an SMA male plug on each end, 100W
impedance.
For use with: 4210-CVU
CA-557-*: 8-pin male to 8-pin male cable assembly with straight through pin configuration.
CA-557-1: 1m (3.3 ft)
CA-557-2: 2m (6.6 ft)
CA-557-3: 3m (10 ft)
For use with: 2600-PCT-x, 4200-PCT-x, 8010
For use with: 2601B, 2602B, 2611B, 2612B,
2651A SourceMeter® SMU Instruments, 2600PCT-x, 4200-PCT-x, 8010
CA-562-0B and CA-562-2B: Safety banana to
banana jumper (254mm).
For use with: 2600-PCT-x, 4200-PCT-x, 8010
CA-451A: 10.8cm (4.25 in) RG188 coax cable
terminated with an SMA male plug on each, 50W
impedance.
ACCESSORIES
Cables
Cables
For use with: 4200-SCS
CA-558-2: 25-pin D-sub to 3-pin interlock cable
assembly.
For use with: Series 2600B, 2600-PCT-x,
2651A, 2657A, 4200-SCS, 4200-PCT-x, 8010
A Greater Measure of Confidence
A Tektronix Company
Cables
For use with: 2600-PCT-x, 4200-PCT-x, 8010
HV-CA-571-3: High voltage triax to unterminated cable.
Cables
For use with: 2657A, 2600-PCT-x, 4200-PCT-x
For use with: 7711, 7712, System 46,
System 46T
SC-9: Low noise coax cable without con­nec­tors
(sold by the foot).
CA-568-xA: Protective earth safety ground cable
with eye lugs (x = 12, 18, or 120 inches).
For use with: 2657A, 2657-LIM-3,
2657-PIM-200, 8010
S46-SMA-1: SMA cable, male to male, 0.3m (1 ft).
Cables
CA-563C: BNC to banana jumper (240mm).
SHV-CA-553-x: High voltage triax to SHV cable
(x = 1, 2, or 3m) (3kV rated).
For use with: 2657A
SC-22: Low noise triax cable without con­nec­tors
(sold by the inch).
For use with: CS-631
ACCESSORIES
HV-CA-554-x: High voltage triax to triax cable
(3kV rated) (x = 0.5, 1, 2, or 3m).
For use with: 2657A, 2657-LIM-3,
2657-PIM-200, 8010
S46-SMA-0.5: SMA cable, male to male, 0.15m
(0.5 ft).
For use with: 7711, 7712, System 46,
System 46T
A Greater Measure of Confidence
A Tektronix Company
Cables
SC-93: Low thermal, 2-conductor shielded cable,
#22AWG solid copper (sold by the foot).
SC-200A: Shielded twisted pair cable (sold by
the inch). Recommended for general-purpose
use with Series 2600B System SourceMeter SMU
instruments.
For use with: Series 2600B
Cables
SC-182: Low inductance (42nH/ft) coaxial cable
for minimizing test lead impedance in circuits
using fast transient response power supplies.
The cable is sold by the foot and comes without
connectors.
For use with: 2302, 2303, 2303-PJ, 2304A,
2306, 2306-PJ, 2306-VS
USB-B-1: USB Cable, 1m (3.3 ft).
For use with: 2100, Series 2200, 3390, Series
3700A, Series 2600, 2450
ACCESSORIES
Cables
For use with: 2182-KIT
99 Washington Street
Melrose, MA 02176
Phone 781-665-1400
Toll Free 1-800-517-8431
Visit us at www.TestEquipmentDepot.com
A Greater Measure of Confidence
A Tektronix Company
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement