LG | LMX28988 | User's Manual | LG LMX28988 User's Manual

Life's Good
OWNER'S
_NUAL
FRENCH DOOR
REFRIGERATOR
Please
keep
read this guide
it handy
for
thoroughly
reference
before
operating
and
at ail times.
LMX28988_
P/No.
: MFL62184506
www.lge.com
INIRODUCIION
IMPORTANT SAFETY INFORMATION
Basic Safety Precautions ........................................
3
CFC Disposal ..........................................................
4
How to Connect Electricity ......................................
5
f
THANK YOU!
Congratulations
PARTS AND FEATURES
Special Features .....................................................
6
Key Parts and Components ....................................
7
and welcome
on your purchase
to the LG family.
Your new LG French Door
INSTALLATION
Choose the Proper Location ...................................
Clearances ..............................................................
8
8
Refrigerator
Flooring ...................................................................
Handle Removal ......................................................
9
9
advanced
Refrigerator Door and Freezer Drawer Removal ..10
Connecting the Water Supply ...............................
18
Connecting the Water Lines ..................................
19
combines
cooling
technology
with simple operation
efficiency.
and high
Follow the operating
Leveling the Refrigerator Doors ............................ 20
Starting ..................................................................
21
manual
HOW TO USE
Control Panel Features .........................................
22
The LED Display ...................................................
23
Adjusting the Temperatures
Operating the Dispenser
and Display ............. 24
......................................
25
...........................................
26
Spaceplus Ice System ..........................................
27
Automatic
.............................................
28
Storing Foods .......................................................
Location of Foods .................................................
29
30
Shelf Height Adjustment .......................................
31
Setting the Functions
Icemaker
Removing and Replacing Components
................ 32
CARE AND CLEANING
Cleaning the Refrigerator .....................................
General Information .............................................
36
36
Replacing the Water Filter.....................................
37
TROUBLESHOOTING
Before Calling for Service ..............................
42
SPECIFICATIONS
Key Dimensions and Specifications
..................... 48
WARRANTY
Product Registration Information .......................... 49
2
and care instructions
in this
and your refrigerator
will provide
you with many years
of reliable service.
J
IMPORIAN!
SAFELY
INFORMAIlON
BASIC SAFETY PRECAUTIONS
This guide contains
safety messages.
,_
many important
safety
messages.
Always
read and obey all
This is the safety alert symbol. It alerts you to safety messages that inform you of hazards that can kill
or hurt you or others or cause damage to the product. All safety messages will be preceded by the safety
alert symbol and the hazard signal word DANGER, WARNING, or CAUTION. These words mean:
DANGER
You might be killed or seriously injured if you don't follow instructions.
WARNING
You can be killed or seriously injured if you don't follow instructions.
&CAUTION
Indicates an imminently hazardous situation which, if not avoided, may
result in minor or moderate injury, or product damage.
All safety messages will identify the hazard, tell you how to reduce the chance of injury, and tell you
what can happen if the instructions are not followed.
WARNING
To reduce the risk of fire, electric shock, or
injury to persons when using your product,
basic safety precautions should be followed,
including the following.
Read all instructions before using this appliance.
• NEVER unplug your refrigerator by pulling on the
power cord. Always grip the plug firmly and pull it
straight out from the outlet.
• Repair or replace immediately all electric service
cords that have become frayed or otherwise
damaged. Do not use a cord that shows cracks or
abrasion damage along its length or at either the
plug or connector end.
• When moving your refrigerator away from the wall,
be careful not to roll over or damage the power cord.
• DO NOT store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any other
appliance.
• DO NOT allow children to climb, stand, or hang on
the refrigerator doors or shelves in the refrigerator.
They could damage the refrigerator and seriously
injure themselves.
• Keep fingers out of pinch point areas; clearances
between the doors and cabinet are necessarily
small. Be careful closing doors when children are
in the area.
• Unplug your refrigerator before cleaning or making
any repairs.
NOTE: Service should be performed by a qualified
technician.
• Before replacing a burned-out light bulb, unplug the
refrigerator or turn off power at the circuit breaker
or fuse box in order to avoid contact with a live wire
filament. (A burned-out light bulb may break when
being replaced.)
NOTE: Some models have LED interior lighting and
service should be performed by a qualified
technician.
NOTE: Setting either or both controls to the OFF
position does not remove power to the light circuit.
• When you are finished, reconnect the refrigerator to
the electrical source and reset the control
(Thermostat Refrigerator Control, or Freezer
Control, or Freezer Control, depending on the
model) to the desired setting.
• This refrigerator must be properly installed in
accordance with the Installer Instructions
that
were taped to the front of the refrigerator.
• After your refrigerator is in operation, do not touch
the cold surfaces in the freezer compartment when
hands are damp or wet. Skin may adhere to the
extremely cold surfaces.
• In refrigerators with automatic icemakers, avoid
contact with the moving parts of the ejector
mechanism or with the heating element that
releases the cubes. DO NOT place fingers or hands
on the automatic icemaking mechanism while the
refrigerator is plugged in.
• Do not modify or extend the power cord length.
It will cause electric shock or fire.
3
IMPORIAN!
SAFELY
INFORMATION
BASIC SAFETY PRECAUTIONS (CONT.)
• DO not use drier to dry the inside, nor light a candle
to remove odor.
• Install in places away from the fire such as the place
where flammable gas is leaked.
• This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning use of the
appliance by a person responsible for their safety.
Children should be supervised to ensure that they
do not play with the appliance.
• DO NOT refreeze frozen foods which have
thawed completely. The United States
Department of Agriculture in Home and Garden
Bulletin No. 69 says:
...You may safely refreeze frozen foods that have
thawed if they still contain ice crystals or if they are
still cold--below 40°F (4°C).
Even partial thawing and refreezing reduces the
quality of foods, particularly fruits, vegetables,
and prepared foods. The eating quality of red
meats is affected less than that of many other
foods. Use refrozen foods as soon as possible to
save as much of their quality as you can.
Risk of Child Entrapment
Discarded or abandoned refrigerators are
dangerous, even if they will sit for just a few
days. If you are disposing of your old refrigerator,
please follow the instructions below to help prevent
accidents.
Before you throw away your old refrigerator or
freezer:
....
!_:_::_
• Take off the doors.
• Do not leave the shelves in
place, as children may climb
inside.
...Thawed ground meats, poultry, or fish that have
any off-odor or off-color should not be refrozen
and should not be eaten. Thawed ice cream
should be discarded. If the odor or color of any
food is poor or questionable, dispose of it. The
food may be dangerous to eat.
&WARNING
Keep away from moving
drawers.
Do not sit or climb on
• Small children can be knocked down.
drawers.
• Fingers and toes can be injured.
• Refrigerator can tip over.
CFC DISPOSAL
Your old refrigerator may have a cooling system
that used CFCs (chlorofluorocarbons). CFCs are
believed to harm stratospheric ozone.
If you are throwing away your old refrigerator,
make sure the CFC refrigerant is removed for
proper disposal by a qualified servicer.
4
If you intentionally release this CFC refrigerant, you
can be subject to fines and imprisonment under
provisions of environmental legislation.
IMPORIAN!
SAFELY
INFORMAIlON
HOW TO CONNECT ELECTRICITY
f
IMPORTANT:
Please read carefully.
b
&WARNING
Electrical
Shock Hazard
For personal safety, this appliance must be
properly grounded. Have the wall outlet and
the circuit checked by a qualified electrician to
make sure the outlet is properly grounded.
J
RECOMMENDED
GROUNDING
METHOD
The refrigerator should always be plugged into
its own individual properly grounded electrical
outlet rated for 120 volts, 60 Hz, AC only, and
fused at 20 amperes. This provides the
best performance and also prevents overloading
house wiring circuits which could cause a fire
hazard from overheated wires. It is
recommended that a separate circuit serving
only this appliance be provided.
Use a receptacle which cannot be turned off with
a switch or pull chain. Do not use an extension
cord. Where a standard two-prong wall outlet is
encountered, it is your personal responsibility
and obligation to have it replaced with a properly
grounded three-prong wall outlet.
USE OF EXTENSION
CORDS
Because of potential safety hazards under
certain conditions, we strongly recommend
against the use of an extension cord.
However, if you still elect to use an extension
cord, it is absolutely necessary that it be a UL-listed
(USA), 3-wire grounding-type appliance
extension cord having a grounding-type plug
and outlet and that the electrical rating of the
cord be 20 amperes (minimum) and 120 volts.
Use of an extension cord will increase the
clearance needed for the back of the
refrigerator.
Do not, under any circumstances, cut or
remove the third (ground) prong from the
power cord.
Do not use an adapter plug.
NOTE: Some models have LED interior lighting and
service should be performed by a qualified technician.
When you are finished, reconnect the refrigerator to
the electrical source and reset the control
(Thermostat, Refrigerator Control, or Freezer Control,
depending on the model) to the desired setting.
SAVE THESE INSTRUCTIONS
5
PARISANDFEATURES
SPECIAL FEATURES
_Jt
f
CONTROL PANEL LED DISPLAY SCREEN
Simple electronic controls are user-friendly. The LED
screen shows refrigerator and freezer temperatures,
displays water filter status, dispenser information, and
more.
O
.48
ICE PLUS
When this feature is activated, the freezer section will
run at the coldest temperature for a 24- hour period to
increase ice production.
FILTERED WATER AND ICE DISPENSER
The water dispenser offers fresh, chilled, filtered
water through the door. The ice dispenser offers
cubed or crushed ice.
DOOR ALARM
A warning alarm sounds at 30-second intervals when
the refrigerator or freezer door is left open for more
than 60 seconds.
J
f
SPACEPLUS ICE SYSTEM
The icemaker automatically produces 80-130 ice
cubes in a 24-hour period to keep the ice dispenser
fully supplied. The in-door design creates more shelf
space.
CRISPERS
LG's crispers preserve humidity and help vegetables
stay crisp.
GLIDE'N'SERVE
Provides storage space with a variable temperature
control that keeps the compartment colder than
refrigerator.
MULLION
The door mullion folds in when the left
door is opened.
_)
AUTO CLOSING HINGE
When you slightly push the door of the refrigerator,
it is automatically closed. (The door is automatically
closed within 30 ° of the opening angle.)
6
J
NOTE: This guide covers several different models.
The refrigerator you have purchased may have some
or all of the items listed below. The locations of the
features shown below may not match your model.
PARTSANDFEATURES
KEY PARTS AND COMPONENTS
In addition to the special features and components outlined in the Special Features section,
there are several other important components that are referenced in this manual.
O
O
ADJUSTABLE
REFRIGERATOR
SHELVING
O
LED INTERIOR
LAMPS
The refrigerator compartment shelves are
adjustable to allow flexibility for storage needs.
Two separate LED arrays light the freezer and
refrigerator interiors.
GALLON STORAGE BINS
CAN STORAGE BIN
Three interchangeable bins can be arranged to
suit your storage needs.
FIXED DOOR BINS
REMOVABLE
ICE STORAGE BIN
The ice storage bin can be removed to fill ice
buckets, coolers, or pitchers.
f
J
7
INSIAllAIION
CHOOSE THE PROPER LOCATION
&WARNING
Excessive
Weight
Hazard
Two or more people are required when
moving and unpacking the appliance.
• Store and install the refrigerator where it will not
be exposed to temperatures below freezing or
exposed to outdoor weather conditions.
• Install this appliance in an area where the
temperature is between 55°F (13°C) and 110°F
(43°C). If the temperature around the appliance
is too low or too high, cooling ability may be
adversely affected.
• If this refrigerator is installed where the
temperature is above 110°F (43°C), the
freezing capacity is compromised and the cost
of electricity used increases.
• To reduce the risk of electric shock, do not
install the refrigerator in a wet or damp area.
• Select a place where a water supply can be
easily connected for the automatic icemaker
and dispenser.
• Unstable installation may cause vibration and
noise. If the floor is not even, make the
refrigerator level by rotating the height adjusting
screws.
• Properly ground the refrigerator to conform with
all governing codes and ordinances.
&CAUTION
Avoid placing the unit near heat sources,
direct sunlight, or moisture.
CLEARANCES
f
• Too small a distance from adjacent items may
result in lowered freezing capability and
increased electricity consumption charges.
Allow at least 24 in. (61 cm) in front of the
refrigerator to open the doors.
NOTE: For complete dimensions and specifications,
see page 48.
_-
8
2" (5.08 cm)
INSIAllAIION
FLOORING
• To minimize noise and vibration, the refrigerator
MUST be installed on a solidly constructed floor.
• Carpeting and soft tile surfaces are not
recommended.
• To avoid vibration, the unit must be level.
If required, adjust the leveling legs to compensate
for unevenness of the floor. The front should be
slightly higher than the rear to aid in door
closing. The leveling legs can be turned easily
by pushing against the top of the refrigerator to
take the weight off the feet. Turn the leveling
legs clockwise to raise the unit or
counterclockwise to lower it.
• Never install the refrigerator on a platform or
weakly supported structure.
NOTE: When moving the refrigerator for cleaning
or service, be sure to protect the floor. Always
pull the refrigerator straight out when moving it.
Do not wiggle or walk the refrigerator when trying
to move it; floor damage could occur.
NOTE: It is recommend that the doors be removed when it is necessary to move the refrigerator through a
narrow opening.
HANDLE REMOVAL
NOTE: Handle appearance may vary from illustrations on this page.
Mountinq
Fasteners
Set Screw
&CAUTION
• Use special care when removing handles to
prevent scratching the doors.
• The handle could be damaged if you hit it with
a hammer while removing or attaching.
• When you assemble or disassemble a handle,
you must push or pull with reasonable force.
Allen Wrench
Loosen the set screws with a 2.5 mm (3/32") Allen
wrench and remove the handle.
NOTE: If the handle mounting fasteners need
to be tightened or removed, use a 1/4" Allen
wrench.
9
INSIAllAIION
HANDLE REMOVAL (CONT.)
HANDLE REINSTALLATION
f
_
Mounting
Fasteners
\
Place the handle on the door by aligning handle
footprints to fit mounting fasteners and tighten the
set screws with a 2.5 mm (3/32") Allen wrench.
NOTE: If the handle mounting fasteners need to
be tightened or removed use a 1/4" Allen wrench
REFRIGERATOR DOOR AND FREEZER DRAWER REMOVAL
REFRIGERATOR
DOOR REMOVAL
&WARNING
Electric Shock Hazard
• Disconnect electrical supply to the refrigerator
before installing. Failure to do so could result in
death or serious injury.
• Do not put hands or feet or metal sticks into the air
vents, base grille, or bottom of the refrigerator.
You may be injured or receive an electrical shock.
• Be careful when you work with the hinge, base
grille, and stopper. You may be injured.
Before you begin, remove food and bins from the
doors.
If your entrance door is too narrow for the refrigerator
to pass through, remove the refrigerator door and
move the refrigerator sideways through the doorway.
10
To remove the left refrigerator door:
Pull the water tube out of the fitting while
pressing the release ring on the fitting.
NOTE : When you pull out the tube, first you
have to push the collet by opposite direction
of arrow in the upper picture and pull the tube
out by direction of arrow.
INSIAllAIION
REFRIGERATOR DOOR AND FREEZER DRAWER REMOVAL (CONT.)
REFRIGERATOR
(2)
\
DOOR REMOVAL
(CONT.)
11)
/(2)
(3).
(5)
(4)
/
_J
(7)
/
(8)
• Open the door. Remove the top hinge cover
screw (1).
• Use a flat blade screwdriver to lift the tabs
on the front underside of the cover(2). Lift up
the cover.
• Remove the cover. Pull out the tube (3).
• Disconnect all the wire harnesses (4).
• Remove the grounding screw(5)
• Rotate hinge lever (6) counterclockwise.
Lift the top hinge (7) free of the hinge lever
latch (8).
IMPORTANT: When lifting the hinge free of
the latch, be careful that the door does not fall
forward.
To remove the right refrigerator door:
• Open the door. Remove the top hinge cover
screw (1). Lift up the cover (2).
• Remove the cover.
• Rotate the hinge lever (3) clockwise.
Lift the top hinge (4) free of the hinge lever
latch (5).
IMPORTANT: When lifting the hinge free of
the latch, be careful that the door is heavy
and may fall forward.
• Lift the door from the middle hinge pin and
remove the door.
• Place the door, inside facing up, on a nonscratching surface.
• Lift the door from the middle hinge pin and
remove the door.
• Place the door, inside facing up, on a nonscratching surface.
11
INSIAllAIION
REFRIGERATOR DOOR AND FREEZER DRAWER REMOVAL (CONT.)
REFRIGERATOR
DOOR REINSTALLATION
_(4)
(3)
....(1)
Install the right-side door first.
• Lower the door onto the middle hinge pin as
shown.
• Make sure the plastic sleeve is inserted in
the bottom of the door.
• Fit the top hinge (1) over the hinge lever
latch (2) and into place. Rotate the lever
(3) counterclockwise to secure the hinge.
• Hook the tab on the door-switch side of the
cover (4) under the edge of the wire opening
in the cabinet top. Position the cover into
place. Insert and tighten the cover screw (5).
(2)\\
(4)
/
Install the left-side door.
• Lower the door onto middle hinge pin.
/
• Fit the top hinge (1) over the hinge lever
latch (2) and into place. Rotate the lever (3)
clockwise to secure the hinge.
• Install the grounding screw (4) and connect
all the wire harnesses (5).
12
INSIAllAIION
REFRIGERATOR DOOR AND FREEZER DRAWER REMOVAL (CONT.)
REFRIGERATOR
DOOR REINSTALLATION
Cover
(cont.)
Cover Screw
(6)_
/
/
• Push the water supply tube (6) into the hole
on the top case and pull it through the
backplate.
Insert the water supply tube into the
connector.
• Insert the tube at least 5/8 in. (15 mm) into
the connector.
• Hook the tab on the door-switch side of the
cover under the edge of the wire opening in
the cabinet top. Position the cover into
place. Insert and tighten the cover screw.
&CAUTION
Collet
Tube
Insert Line
Clip --
1. Insert the tube until you can see only one of the lines printed on the tube.
2. After inserting, pull the tube to ascertain that it is secure.
3. Assemble the clip.
Correct
Incorrect
13
INSIAllAIION
REFRIGERATOR DOOR AND FREEZER DRAWER REMOVAL (CONT.)
FREEZER DRAWER
REMOVAL
&CAUTION
• Care should be taken to avoid product or property
damage when removing the freezer door. It maybe
necessary to have assistance with the following
insturctions.
• To avoid damage do not hold the handle when
removing the door. It could come off and cause and
injury.
TOP DRAWER
J
14
Fully extend the freezer drawer. Lifting up and
out to remove the drawer and ice bin making
sure to clear the rail system.
Remove one white screw 0 on each side of
the rails.
Holding both sides of the door pull up to
separate the door from the rails.
With both hands, bend the center bar just
enough to allow the gears on both ends to
release from their tracks.
_,CAUTION:
When you remove the drawer, do not hold the handle. If it may come off and it could cause
personal injury.
_,CAUTION:
When placing the drawer on the floor, care should be taken to avoid floor damage.
INSIAllAIION
REFRIGERATOR DOOR AND FREEZER DRAWER REMOVAL (CONT.)
FREEZER DRAWER REMOVAL
(cont.)
&CAUTION
• Care should be taken to avoid product or property
damage when removing the freezer door. It maybe
necessary to have assistance with the following
insturctions.
• To avoid damage do not hold the handle when
removing the door. It could come off and cause and
injury.
BOTTOM DRAWER
f
Fully extend the freezer drawer. Lifting up and
out to remove the Dura Base basket making
sure to clear the rail system.
Remove one white screw (_) on each side of
the rails.
Holding both sides of the door pull up to
separate the door from the rails.
With both hands, bend the center bar just
enough to allow the gears on both ends to
release from their tracks.
_,CAUTION:
When you remove the drawer, do not hold the handle. If it may come off and it could cause
personal injury.
&CAUTION:
When placing the drawer on the floor, care should be taken to avoid floor damage.
15
INSIAllAIION
REFRIGERATOR DOOR AND FREEZER DRAWER REMOVAL (CONT.)
FREEZER DRAWER
REINSTALLATION
&CAUTION
&WARNING
• To avoid possible injury or product or property
damage, you will need two people to perform the
following instructions. It maybe necessary to have
assistance with the following instructions.
Risk of Child Entrapment
• To prevent accidental child and pet entrapment
or suffocation risk, DO NOT allow them to play
inside of the freezer drawer.
• DO NOT step or sit on the freezer drawer.
TOP DRAWER
16
To reinstall the freezer drawer, place the bar
back on edge of the gears in the secure holes
on the opposite rails and pull out until the
drawer rails are fully extended.
Hook door supports (_) into rail tabs @.
Lower door into final position and tighten the
screws.
With the drawer pulled out to full extension,
insert the drawer and ice bin in the rail
assembly.
_,WARNING:
To prevent accidental child and pet entrapment or suffocation risk.
DO NOT allow them to play inside of drawer.
_,WARNING:
DO NOT step or sit down on freezer.
INSIAllAIION
REFRIGERATOR DOOR AND FREEZER DRAWER REMOVAL (CONT.)
FREEZER DRAWER REINSTALLATION
(CONT.)
&CAUTION
&WARNING
• To avoid possible injury or product or property
damage, you will need two people to perform the
following instructions. It maybe necessary to have
assistance with the following instructions.
Risk of Child Entrapment
• To prevent accidental child and pet entrapment
or suffocation risk, DO NOT allow them to play
inside of the freezer drawer.
• DO NOT step or sit on the freezer drawer.
BOTTOM DRAWER
F
To reinstall the freezer drawer, place the bar
back on edge of the gears in the secure holes
on the opposite rails and pull out until the
drawer rails are fully extended.
Hook door supports (_) into rail tabs @.
Lower door into final position and tighten the
screws.
With the drawer pulled out to full extension,
insert the lower basket in the rail assembly.
&WARNING:
To prevent accidental child and pet entrapment or suffocation risk.
DO NOT allow them to play inside of drawer.
_,WARNING:
DO NOT step or sit down on freezer.
17
INSIAllAIION
CONNECTING THE WATER SUPPLY
&WARNING
Connect
only.
to safe drinking
IMPORTANT:
you begin.
water supply
• The water pressure must be between 20 and
120 p.s.i. (1.4~8.4 kgf/cm 2) on models without
a water filter and between 43 and 121 p.s.i.
(3~8.5 kgf/cm 2) on models with a water filter.
• If water pressure does not reach 20 psi
(1.4 kgf/cm _) or falls below, it is necessary to
purchase a separate pressure pump for normal
automatic icemaker and water dispensing operation.
• It is recommended that the total length of the water
feed tube does not exceed 26 ft. (8 m).
• Install the water supply line where it will not be
affected by heat.
• If a reverse osmosis water filtration system is
connected to your cold water supply, This water line
installation is not warranted by the refrigerator or
icemaker manufacturer. Follow next instructions
carefully to minimize the risk of expensive water
damage.
• If a reverse osmosis water filtration system is
connected to your cold water supply, the water
pressure to the reverse osmosis system needs
to be a minimum of 40 to 60 psi (2.8 kgf/cm _ ~
4.2 kgf/cm 2, less than 2.0~3.0sec to fill a cup of
7oz capacity).
If the water pressure from the reverse osmosis
system is less than 20 psi (1.4 kgf/cm _, more than
4.0sec to fill a cup of 7oz capacity):
• Check to see whether the sediment filter in the
reverse osmosis system is blocked. Replace the
filter if necessary.
• Allow the storage tank on the reverse osmosis
system to refill after heavy usage.
• If the issue about water pressure from reverse
osmosis remains, call a licensed, qualified plumber.
18
Read all directions thoroughly before
• If operating the refrigerator before installing the
water connection, turn the icemaker to the OFF
position to prevent operation without water.
• All installations must be in accordance with local
plumbing code requirements.
• Use copper tubing and check for leaks.
• Install tubing only in areas where temperatures will
remain above freezing.
• It may take up to 24 hours for the icemaker to begin
producing ice.
Tools Required
• Standard screwdriver
• 7/16-in. and 1/2-in. open-end wrenches or two
adjustable wrenches
• 1/4-in. nut driver
• 1/4-in. drill bit
• Hand drill or electric drill (properly grounded)
NOTE: Refrigerator
saddle-type shutoff
Before purchasing,
complies with local
dealers offer a kit with a 1/4-in.
valve, a union, and copper tubing.
make sure a saddle-type valve
plumbing codes.
Do not use a piercing-type or 3/16-in. saddle valve
which reduces water flow and clogs more easily.
NOTE: The Commonwealth of Massachusetts
Plumbing Code 248CMR shall be adhered to.
Saddle valves are illegal and use is not permitted in
Massachusetts. Consult with your licensed plumber.
Cold Water
Supply
• The icemaker water valve contains a flow washer
which is used as a water pressure
regulator.
• The icemaker needs to be connected to a cold water
line with water pressure between 20~120 psi
(1.4~8.4 kgf/cm 2) on models without a water filter
and between 43 and 121 p.s.i. (3~8.5 kgf/cm 2) on
models with a water filter.
INSIAllAIION
CONNECTING THE WATER LINES
IMPORTANT: Before connecting the tubing to the water
line, unplug the refrigerator or disconnect the power.
•Turn off the main water supply and open the nearest
faucet to relieve pressure in the line. Opening an outside
faucet may help drain water from the line in the house.
• Find a 1/2-in. vertical COLD water pipe near the
refrigerator.
NOTE: A horizontal pipe will work, but the following
precaution must be taken: drill on the top of the pipe, not the
bottom. This will help keep water away from the drill and
also keep normal sediment from collecting in the valve.
•To determine the length of copper tubing you will need,
measure from the connection on the lower left rear of the
refrigerator to the water pipe. Add 7 ft. (2.1 m) to allow for
moving the refrigerator for cleaning. Use 1/4-in. O.D.
(outside diameter) copper tubing. Be sure both ends of the
copper tubing are cut square.
• Using a drill, drill a 1/4-in. hole in the cold water pipe you
have selected.
• Fasten the shutoff valve to the cold water pipe with the
pipe clamp. Be sure the outlet end is solidly in the 1/4-in.
drilled hole in the water pipe and the washer is under the
pipe clamp. Tighten the packing nut. Tighten the pipe
clamp screws carefully and evenly so the washer makes a
watertight seal.
IMPORTANT: Before connecting the tubing to the
refrigerator, be sure the refrigerator power cord is not
plugged into the wall outlet.
NOTE: If your refrigerator is equipped with an internal water
filter, an external in-line water filter should not be used.
1/4"
Tubing
Do not overtighten or you may crush the copper tubing,
especially if soft (coiled) copper tubing is used. Now you
are ready to connect the copper tubing.
•Slip the compression sleeve and the compression nut onto
the copper tubing as shown. Insert the end of the tubing
into the outlet end squarely as far as it will go. Screw the
compression nut onto the outlet end with a wrench. A flare
nut wrench works best, but an open-end wrench will
suffice. Do not overtighten.
• Place the free end of the tubing into a container or sink,
and turn on the main water supply. Flush out the tubing
until the water is clear. Turn off the shutoff valve on the
water pipe. Coil the copper tubing as shown below.
Cold Water Pipe
Packing
Nut
Pipe Clamp
\
Coil of Polyethelyne
or Copper Tubing
Shutoff
Compression
Compression
• Place the compression nut and ferrule (sleeve) onto the
end of the tubing as shown.
• Insert the end of the copper tubing into the connection as
far as possible. While holding the tubing, tighten the fitting.
IMPORTANT: Tighten any connections that leak.
Open the water at the shutoff valve.
• Plug in the refrigerator.
•Arrange the coil of copper tubing behind the refrigerator so
it does not vibrate against the back of the refrigerator or
against the wall.
•Check for leaks.
1/4"
•Before connecting the water line to house, purge the
house line for 2 minute.
NOTE: It may take a few seconds for water to begin to flow
as the internal tank fills and air clears from the lines.
• Push the refrigerator back to the wall.
•Set the icemaker switch to the ON position.
Connection
• Remove the plastic flexible cap from the water valve.
NOTE: The icemaker will not begin to operate until it
reaches its operating temperature of 15°F (-9°C).
It will then begin operation automatically.
NOTE: Throw away the first few batches of ice (about
20 pieces).
19
INSIAllAIION
LEVELING THE REFRIGERATOR DOORS
&WARNING
&CAUTION
Electrical
• To avoid possible injury or product or property
damage, you will need two people to perform the
following instructions.
Shock Hazard
• Be careful when you work with the hinges,
base grille, and stopper. You may be injured.
• Do not put hands, feet, or metal items into
the air vents, base grille, or the bottom of the
refrigerator. You may be injured or receive
an electrical shock.
Leveling
After installing, secure the product with the LEGS
so it does not move to the right or left.
Your refrigerator has two front leveling legs-one on the right and one on the left. Adjust the
legs to alter the tilt from front to back or side to
side. If your refrigerator seems unsteady or you
want the doors to close more easily, adjust the
refrigerator's tilt using the following instructions:
Level the refrigerator by using an 11/16 inch
(18mm) wrench or a flat blade screw driver.
Turn the leveling legs (CCW) to raise or (CW)
to lower the height of the front of the
refrigerator.
NOTE: The front of the refrigerator should be
slightly higher than the back.
Kick Plate
Plug the power cord into a 3-prong grounded
outlet, and move the refrigerator into its final
position. Remove the kick plate screws and
then the kick plate.
• Open the Freezer Drawer.
• Once the drawer is open, there is sufficient
clearance to remove the screws on top of
the kick plate.
NOTE: To replace the kick plate, place it into
position, and then insert and tighten the
screws.
2O
NOTE: If someone pushes backward against
the top of the refrigerator, weight is lifted off of
the leveling legs, which makes adjustment
easier.
Open both doors to make sure they close
easily. If not, raise the leveling legs higher by
turning both clockwise the same amount.
Once the refrigerator is level, replace the kickplate.
NOTE: Your new refrigerator is uniquely
designed with two fresh food doors. Either
door can be independently opened or closed.
You will have to exert slight pressure on the
doors to close them completely.
NOTE: In order not to move the refrigerator
back and forth, fix it with the 'Adjust' to the
floor to install and use.
INSIAllAIION
LEVELING THE REFRIGERATOR DOORS (CONT.)
DOOR ALIGNMENT
• Use the wrench (Included with the User Manual)
to adjust the bolt in the door hinge to adjust the
height. (counter clockwise to raise or clockwise
to lower)
STARTING
Before loading your refrigerator with fresh foods:
• Remove tape and any temporary labels from
your refrigerator before using. To remove any
remaining adhesive residue, rub the area briskly
with your thumb, or rub a small amount of liquid
dish soap over the adhesive with your fingers.
Wipe with warm water and dry. Do not use sharp
instruments, rubbing alcohol, flammable fluids,
or abrasive cleaners to remove tape or glue.
NOTE: Do not remove any warning-type labels,
the model and serial number label, or the tech
sheet that is taped to the back of the refrigerator.
• Install accessories such as the ice cube bin,
drawers, and shelves, in their proper places.
They are packed together to prevent possible
damage during shipment.
• Adjust the desired temperature for the
refrigerator and freezer (see Adjusting the
Temperature and Functions).
• Let your refrigerator run for at least 2 or 3 hours
before putting food in it. Check the flow of cold
air in the freezer compartment to ensure proper
cooling. Your refrigerator is now ready for use.
• Thoroughly clean your refrigerator and wipe off all
dust that may have accumulated during shipping.
21
HOW10 USE
CONTROL PANEL FEATURES
For complete details on button functions, see pages 23-26.
NOTE: The shape of the buttons may not match your model.
li_
LED DISPLAY
The LED display shows the temperature settings,
dispenser options, water filter, door alarm, and locking
status messages.
O
ICE TYPE Bu'n'ON
The ICE TYPE button is used to select Cubed Ice or
Crushed Ice.
FREEZERBu'n'ON
Press the FREEZER button to adjust the temperature in
the freezer compartment.
NOTE: When pressed simultaneously with the
REFRIGERATOR button for more than five seconds, the
temperature display will change from Fahrenheit to Celsius
or vice versa.
REFRIGERATOR BuI-rON
Press the REFRIGERATOR button to adjust the
temperature in the refrigerator compartment.
NOTE: When pressed simultaneously with the FREEZER
button for more than five seconds, the temperature display
will change from Fahrenheit to Celsius or vice versa.
ICE PLUS/ENERGY SAVING Bu'n'ON
Press this button to activate the ICE PLUS function to
increase icemaking capabilities.
OR, Press and hold this button for at least 3 seconds to
activate or deactivate the Energy Saving mode.
(_
LIGHT/FILTER Bu'n'ON
The LIGHT/FILTER button controls the lamp in the
dispenser.
Press and hold the LIGHT/FILTER button for more
than 3 seconds to reset the filter indicator after
the water filter has been replaced.
ALARM/LOCK BUTTON
Press this button to control the door-open alarm.
Press and hold this button at least 3 seconds to lock or
unlock all the other function buttons on the control panel,
including operation of the dispenser.
22
ttOWlO USE
THE LED DISPLAY
The LED display shows the temperature settings,
dispenser options, water filter, door alarm, and
locking status messages.
O
DISPENSER
SELECTION INDICATOR
Shows Cubed ice or Crushed Ice selection
that will be dispensed when the push switch
is pressed.
O
FREEZER TEMPERATURE
Indicates the set temperature of the freezer
compartment in Celsius or Fahrenheit.
REFRIGERATOR
TEMPERATURE
Indicates the set temperature of the refrigerator
compartment in Celsius or Fahrenheit.
O
ICE PLUS
When the ICE PLUS/ENERGY
SAVING button is
pressed, the display will indicate the selected
function has been activated.
DISPENSER
LIGHT INDICATOR
When the LIGHT button is pressed,
the display will indicate the selected function:
The dispenser light is on, this indicator will
appear on the display panel.
&CAUTION
Display
mode setting
and its cancellation
• With the refrigerator door open, keep pressing the
REFRIGERATOR button and ICE PLUS/ENERGY
SAVING button more than 5 seconds, then it goes
to the display mode.
• Perform the same way again to cancel the display
mode.
(_
DOOR ALARM INDICATOR
This indicator shows that the door-open
warning alarm is activated.
• All freezing units do not work at the display mode.
ENERGY SAVING
This indicater shows that Energy Saving mode is
activated.
tt_
WATER FILTER STATUS
This indicator shows the current status for
the water filter. See Resetting the Filter Indicator.
_)
LOCK STATUS
This indicator shows the current status for
the control panel functions is set to LOCK.
23
HOW10 USE
ADJUSTING THE TEMPERATURES
Adjust
Freezer
AND DISPLAY
Temperature
Power
Saving
Mode
TO adjust the temperature in the freezer
compartment, press the FREEZER button to cycle
through the the range of available settings.
n
U°F
Adjust
Refrigerator
Temperature
To adjust the temperature in the refrigerator
compartment, press the REFRIGERATOR button to
cycle through the range of available settings.
• The display will remain off until the next time the
door is opened.
The display will also turn on when any button is
pressed, and it will remain on for 20 seconds after
the last door opening or button selection.
• To deactivate the Power-Saving Mode, press the
FREEZER and ICE PLUS/ENERGY SAVING
buttons simultaneously
until the tone sounds.
NOTE: The actual inner temperature varies
depending on the food status, since the indicated
temperature setting is the target temperature and
not the actual temperature within the refrigerator.
and hold them for 5 seconds
NOTE: Power Saving Mode function is set on the
product.
Caution
When
Closing
the
Door
Initially set the REFRIGERATOR CONTROL at
37 degrees F and the FREEZER CONTROL at
0 degrees F. Leave them at these setting for
24 hours (one day) to stabilize. Then adjust the
compartment temperature as illustrated above.
Temperature
Display
To change the temperature display from Fahrenheit
to Celsius:
&CAUTION
• Simultaneously press and hold the FREEZER
and REFRIGERATOR buttons for more than
5 seconds.
• Do the same to convert back to Fahrenheit.
24
To reduce the risk of door scratches, please make
sure that the refrigerator door mullion is always folded
in.
If dew gathers on the refrigerator door mullion at any
point, deactivate the Energy Saving mode until the
issue resolves itself.
ttOW10 USE
OPERATING THE DISPENSER
DISPENSING
CRUSHED
ICE
Press the ICE TYPE
button to illuminate the
Crushed Ice icon.
Press the push ice switch
with a glass or other
/_/
container and crushed ice
will be dispensed.
DISPENSING
WATER
Press the push water switch
with a glass or other container
and chilled water will be
dispensed.
When the water switch is pressed, the light will be
illuminated.
CONTROLLING
DISPENSING
WATER
CUBED ICE
THE DISPENSER
LIGHT
Press the LIGHT/FILTER
button to turn the dispenser
light on and off.
Press the ICE TYPE
button to illuminate the
Cubed Ice icon.
Press the push switch
with a glass or other
container
and cubed ice
will be dispensed.
NOTE: Hold the glass or other container in place
for a couple of seconds after dispensing ice or
water to catch the last few cubes or drops. The
dispenser is designed to not operate while either
refrigerator door is open.
WATER SWITCH
ICE SWITCH
&CAUTION
• When filling container with a small opening, place the container as close as possible to the opening
on the water or ice dispenser.
• Do not dispense ice into fine china or crystal glasses. China or crystal can break.
Incorrect
Correct
Water
Ice
25
HOW10 USE
SETTING THE FUNCTIONS
Press the button for the desired function to view and
select other settings.
SETTING THE DISPENSER
LOCK
ACTIVATING
ICE PLUS
PreSS and hold the
ALARM/LOCK button for
three seconds to lock the
Press the ICE PLUS/ENERGY
SAVING button once to activate
the ICE PLUS function. The ICE
PLUS icon on the display panel
will illuminate when activated.
dispenser and all of the
other control panel functions.
..÷.-.
i_
Press and hold again for
3 seconds to unlock.
,c__os
SETTING THE DOOR ALARM
The ALARM/LOCK button
also controls the door alarm
that sounds three times in
30-second intervals when
The ICE PLUS function runs the
freezer compartment at the
coldest setting for a 24-hour
period to increase icemaking by
up to about 20%, and then turns
off automatically.
NOTE: Press the button again to deactivate
the ICE PLUS function.
a compartment door is left
open
_/1A
r-'4J}
for more
than
ACTIVATI NG E N ERGY SAVl NG
60
seconds. The alarm stops
sounding when the door is
closed.
Press the ICE PLUS/ENERGY
SAVING button for at least 3
seconds to activate or
deactivate the function.
Press the ALARM/LOCK button once to activate
and deactivate the door alarm function.
This function is recommended
NOTE: Contact your local service center if the
alarm continues to sound after the doors are closed.
[_
RESETTING THE FILTER INDICATOR
......
CHANGE
MONTH
for added energy savings.
(Some heaters to reduce excess
moisture on the refrigerator may
be turned off)
The energy saving function is also recommended
during long periods of time spent away from
home-like vacation.
Press and hold the
LIGHT/FILTER button for
more than 3 seconds to
reset the filter indicator
after the water filter has
been replaced.
NOTE: It is recommended that the filter be replaced
when the indicator light on the front dispenser
reaches 0.
If the water or ice cube taste starts to deteriorates.
DIAGNOSTIC
FAILURE DETECTION
The diagnostic function automatically detects problems with your refrigerator, and a diagnostic code will
appear in the display. NOTE: If a diagnostic code appears in the display during use, note the code and
then call USA 1-800-243-0000
CANADA 1-888-LGCANADA
(24 hours per day/7 days per week)
and select the option to locate an authorized servicer.
26
ttOWlO USE
SPACEPLUS ICE SYSTEM
NOTE: If the On/Off switch on the icemaker is set to
&CAUTION
• Keep hands and tools out of the ice compartment
door and dispenser chute. You could break
something or injure yourself.
The icemaker will stop producing ice when the ice bin
is full. If you need more ice, empty the ice bin into the
extra ice bin in the freezer compartment so the
icemaker can keep producing ice.
Shake the ice bin occasionally to level the ice in it.
Sometimes the ice piles up near the icemaker,
causing the icemaker to misread the amount of ice
cubes and stop producing ice.
NOTE: Storing cans or other items in the ice bin may
damage the icemaker.
Keep the ice compartment door closed tightly. If the
ice compartment door is not closed tightly, the cold air
in the ice bin will freeze food in the refrigerator
compartment. This could also cause the icemaker to
not produce ice.
Off for an extended time, the ice compartment will
gradually warm up to the temperature of the
refrigerator compartment. To prevent ice cubes from
melting and leaking from the dispenser, ALWAYS
empty the ice bin when the icemaker is set to Off for
more than a few hours.
&CAUTION
While you handle the ice bin,
keep your hands out of blade.
The blade has sharp edges
could cause injury.
NOTE: To open or close the ice
room compartment, push or pull on
the handle.
m
I
To remove the in-door ice bin, grip the front
handle, slightly lift the lower part, and slowly
pull out the bin as shown.
To reinstall the in-door ice bin, slightly slant
the bin during replacement to avoid contact
with the icemaker.
f
J
NOTE: Avoid touching the Ice-detecting sensor
when replacing the ice bin. See the label on the ice
compartment door for details.
27
HOW113USE
AUTOMATIC
ICEMAKER
Ice is made in the automatic icemaker and sent to
the dispenser. The automatic icemaker can make
12 ice cubes at a time, above 100 cubes per 24-hour
period. This quantity may vary by circumstance,
including freezer compartment temperature, room
temperature, number of door openings, freezer load,
and other operating conditions.
• It takes about 12 to 24 hours for a newly installed
refrigerator to make ice.
&WARNING
Personal
Injury Hazard
• DO NOT place fingers or hands on the automatic
icemaking mechanism while the refrigerator is
plugged in.
Icemaker
• Icemaking stops when the ice storage bin is full.
• To turn off the automatic icemaker, set the
icemaker switch to OFF (O). To turn on the
automatic icemaker, set the switch to ON (I).
• The water pressure must be 20 and 120psi on
models without a water filter and between 40 and
120 psi on models with a water filter to make normal
amount and size of ices.
Power Switch
NOTE: It is normal that a noise is produced when
ice drops into the ice storage bin.
Ice-detecting
Sensor
• Even when the water pipe is not connected and
the Ice Maker is turned on, the water valve
operates. The noise is generated because the
water pipe is not connected, which does not
mean the icemaker is defective.
&CAUTION
• The first ice and water may include particles or
odor from the water supply line or the water tank.
• Throw away the first few batches of ice (about
20 pieces) and purge the water line for 2 minutes
after installation to eliminate air and odd tastes.
• This is also necessary if the refrigerator has not
been used for a long time.
• Never store beverage cans or other foods in the
ice bin for the purpose of rapid cooling.
Doing so may damage the icemaker or the
containers may burst.
• If discolored ice is dispensed, check the water
filter and water supply. If the problem continues,
contact an Authorized Service Center. Do not
use the ice or water until the problem is corrected.
• Keep children away from the dispenser.
Do not allow children to play in or around dispenser.
• The ice passage may also become blocked
with frost if only crushed ice is used. Remove
the frost that accumulates.
28
• Never use thin crystal glass or crockery to
collect ice. Such glasses or containers may
break, and glass fragments could be in the ice.
• Dispense ice into a glass before filling it with
water or other beverages. Splashing may occur
if ice is dispensed into a glass that already
contains liquid.
• Never use a glass that is exceptionally narrow
or deep. Ice may jam in the ice passage and
refrigerator performance may be affected.
• Keep the glass at a proper distance from the
ice outlet. A glass held too close to the outlet
may prevent ice from dispensing.
• To avoid personal injury, keep hands out of
the ice door and passage.
• Never remove the dispenser cover.
• If you find ice or water dispensed unexpectedly,
turn off the water supply and contact an Authorized
Service Center. Call USA 1-800-243-0000
CANADA
1-888-LGCANADA
(24 hours
a day, 365 days a year) and select the option to
locate an authorized servicer.
ttOWlO USE
STORING FOODS
• Store fresh food in the refrigerator compartment.
Freezer
• How food is frozen and thawed is an important
factor in maintaining freshness and flavor.
• Do not store glass bottles in the freezer
• Do not store food that spoils easily, such as
bananas and melons, at low temperatures.
• Allow hot food to cool prior to storing; placing hot
food in the refrigerator could spoil other food and
lead to higher energy consumption.
• When storing food, cover it with vinyl wrap or store
in a container with a lid. This prevents moisture from
evaporating and helps food to keep its flavor and
nutrition.
• Do not block air vents with food or containers.
Smooth circulation of chilled air keeps the
refrigerator temperatures even.
• Do not open the doors frequently. Opening the
doors allows warm air to enter the refrigerator and
freezer compartments, which causes temperatures
to rise.
• Never overload the door racks; overloading may
push against the inner racks and prevent the doors
from closing correctly.
compartment
compartment;
are
glass
may
break
when
the
contents
frozen.
• Do not refreeze food that has been thawed.
This causes loss of flavor and nutrition.
• Do not touch cold foods or containers, especially
those made of metal, with wet hands or place glass
products in the freezer compartment.
• Do not use the egg box as an ice bin in the freezer.
The egg box will break easily if it freezes.
Refrigerator
compartment
• Avoid placing moist food on the top refrigerator
shelves; it could freeze from direct contact with
chilled air.
• Always clean food prior to refrigeration.
Vegetables and fruits should be washed and wiped
and packed food should be wiped to prevent
adjacent food from spoiling.
NOTE: If you keep the refrigerator in a hot and humid
place, frequent opening of the door or storing a lot of
vegetables in the refrigerator may cause
condensation to form. Wipe the condensation with a
clean cloth or a paper towel.
29
HOW10 USE
LOCATION OF FOODS
il_
REFRIGERATOR
COMPARTMENT
SHEWES
GALLON STORAGE BINS
Store larger food items, platters, and containers
on the expansive refrigerator compartment
shelves.
O
CRISPERS
Store small packed food or beverages such as
condiments, salad dressings, baby foods, milk, or
juice.
_GLIDE'N'SERVE
Store vegetables or fruits with humidity control.
O
Provides storage space with a variable temperature
control that keeps the compartment colder than
refrigerator.
DAIRYCORNER
Store milk products such as butter and cheese.
O
FIXED DOOR BINS
Great for condiments, soda cans, treats, and items
that need to be easily accessible.
3O
HOW10 USE
SHELF HEIGHT ADJUSTMENT
The shelves in your refrigerator are adjustable to
meet your individual storage needs.
storing similar food items together in your
refrigerator and adjusting the shelves to fit
different heights of items will make finding the
exact item you want easier; it will also reduce
the amount of time the refrigerator door is open,
saving energy.
IMPORTANT: Do not clean glass shelves with warm
water when they are cold. Shelves may break if
exposed to sudden temperature changes or impact,
such as bumping. For your protection, glass shelves
are made with tempered glass, which will shatter into
small, pebble-sized pieces.
Remove Shelf
NOTE: Glass shelves are heavy. Use special care
when removing them to avoid dropping them.
Adjusting
Shelves
Remove shelves from the shipping position and place
shelves in the position you want.
&CAUTION
Make sure that shelves are level from one side to the
other. Failure to do so may result in the shelf's falling
or spilling food.
Reinstall Shelf
f
Tilt up the front of the shelf. Lift up the back
and pull out the shelf.
Tilt up the front of the shelf and guide the shelf
hooks into the slots at a desired height. Then
lower the front of the shelf so that the hooks drop
into the slots.
Folding Shelf
You can store taller items such as a gallon
container or bottles by simply pushing the front
half of shelf underneath back half of shelf.
Pull toward you to returm to a full shelf.
31
HOW113USE
REMOVING AND REPLACING COMPONENTS
NOTE: when reinstalling components, reverse
the order of steps for removal. TO prevent damage,
never use excessive force when removing or
reinstalling components.
&CAUTION
• Personal injury can occur if the door bins are not
firmly assembled.
NOTE: DO NOT adjust a loaded bin.
• DO NOT allow children to play with baskets.
The sharp corners on the baskets could cause
injury.
Dairy Bin
Gallon Storage Bins
J
To remove the dairy bin, simply lift it and pull
straight out. To replace the dairy bin, slide it into
place and push down until it stops.
NOTE: The dairy bin will only fit in the top space
on the right-hand door.
The door bins are removable for easy cleaning
and adjusting. Simply lift the bin and pull it straight
out to remove it. To replace the bin, slide it in
above the desired support button and push down
until it stops.
Dispenser Drip Tray
The dispenser drip tray has no self-draining function. It should be cleaned regularly. Remove the cover by
pressing and pulling the tray. Dry it with a cloth. To reinstall the tray, slightly tilt the front of the tray and
snap the ribs into the holes.
32
ttOWlO USE
REMOVING AND REPLACING COMPONENTS (CONT.)
Cris )er humidity control
Glide'N'Serve
f
_J
You can control the amount of humidity in the
moisture-sealed crispers. Store vegetables or
fruits requiring more or less humidity in separate
crispers. Adjust the control to any setting
between HIGH and LOW.
• LOW lets moist air out of the crisper for best
storage of fruits.
• HIGH keeps moist air in the crisper for best
storage of fresh, leafy vegetables.
CAUTION : The glass shelf over the crisper is not
firmly secured. Be careful when tilting.
Removing crisper
\
The Glide'N'Serve provides storage space with a
variable temperature control that keeps the
compartment colder than refrigerator.
This drawer can be used for large party trays, deli
items, or beverages. (but this drawer can't be
used for vegetable.)
Selection Button
• When "MEAT" is selected, the temperature of
the Glide'N'Serve can be kept around 34°F
(1°C). This feature helps keep meat or fish fresh
for a longer time. The Glide'N'Serve temperature
can be maintained under recommended
temperature setting (Freezer :0°F, Referigerator
: 37°F).
• When "DELl" is selected, the temperature of the
Glide'N'Serve can be kept around 38°F (3°C).
This feature helps keep food fresh for a longer
time. The Glide'N'Serve temperature can be
maintained under recommended temperature
setting (Freezer :0°F, Referigerator : 37°F).
• When "PRODUCE" is selected, the temperature
of the Glide'N'Serve can be kept around 41°F
(5°C). This feature helps keep food fresh for a
long time. The Glide'N'Serve temperature can
be maintained under recommended temperature
setting (Freezer :0°F, Referigerator : 37°F).
• To remove, pull the drawer out to full extension.
• Lift the front of the crisper up, then pull it straight
out.
• To install, slightly tilt up the front and insert the
drawer into the frame and push it back into
place.
33
HOW113USE
REMOVING AND REPLACING COMPONENTS ((:ONT.)
TO remove the glass
• Lift up the glass under the crisper cover.
• Pull the glass up and out.
To replace Glide'N'Serve
,CAUTION
• When you close the refrigerator door with
GLIDE'N'SERVE DRAWER opened,
that the drawer could be broken.
• To remove, pull the drawer out to full extension.
• Lift the front of the drawer up, then pull it straight
out.
• To install, slightly tilt up the front and insert the
drawer into the frame and push it back into
place.
NOTE: Removing the fixed door bin is
recommended to reduce the risk of door bin
scratches.
34
ttOW10 USE
REMOVING AND REPLACING COMPONENTS (CONT.)
&CAUTION
&WARNING
• Pinch hazard! Keep hands and feet clear of the
bottom of the door when opening and closing.
Child Entrapment
Ice Bin
DuraBase ® Divider
Hazard
• If the Durabase divider is removed, there is enough
open space for children or pets to crawl inside.
To prevent accidental child and pet entrapment or
suffocation risk, DO NOT allow them to play inside
of drawer.
f
Drawer
To separate the ice bin, pull out the drawer to full
extension. Gently lift and pull out the ice bin.
To reinstall, simply set the ice bin in its correct
position.
35
CAREANDCLEANING
CLEANING THE REFRIGERATOR
&WARNING
Cleaning
Explosion
For models with a stainless steel exterior, use a
commercially available stainless steel cleaner in
accordance with the manufacturer's instructions.
Hazard
• Use nonflammable
cleaner.
• Failure to do so can result in death,
explosion, or fire.
Both the refrigerator and freezer sections defrost
automatically. However, clean both sections about
once a month to prevent odors. Wipe up spills
immediately.
the Exterior
You may also use a clean sponge or soft cloth and
a mild detergent in warm water. Do not use abrasive
or harsh cleaners. Dry thoroughly with a soft cloth.
IMPORTANT: Do not use cleaning waxes,
concentrated detergents, or cleaners containing
petroleum on plastic refrigerator parts such as door
liners or gaskets.
• Unplug the refrigerator.
• Remove all removable parts, such as shelves and
crispers.
• Use a clean sponge or soft cloth and a mild
detergent in warm water. Do not use abrasive or
harsh cleaners.
• Hand wash, rinse, and thoroughly dry all surfaces.
• Plug in the refrigerator.
NOTE: Window sprays, abrasive cleaners, or
flammable fluids can scratch or damage plastic
covers or panels.
Care and Cleaning
of the
NOTE:
to warm
Allow
the freezer
Interior
so the
cleaning
cloth will not stick.
To help remove odors, you can wash the inside of
the refrigerator with a mixture of baking soda and
warm water. Mix 2 tbsp. baking soda to 1 qt. of water
(26 g soda to 1 L of water). Be sure the baking soda
dissolves completely so it does not scratch the
surfaces of the refrigerator.
IMPORTANT:
the interior.
Do not use a spray nozzle to clean
GENERAL INFORMATION
Storage
Power
During average-length vacations, you will
probably find it best to leave the refrigerator in
operation. Place freezable items in the freezer for
longer life.
Most power failures that are corrected within an
hour or two will not affect your refrigerator
temperatures. However, you should minimize the
number of door openings while the power is off.
When you plan to store the refrigerator, remove
all food, disconnect the power cord, clean the
interior thoroughly, and block the doors open to
prevent mold and mildew. Be certain the stored
refrigerator does not present a child entrapment
danger.
Water may drip from the ice bin during a power
outage. To prevent this, remove the ice bin, discard
all of the ice, towel dry, and replace.
Moving
Unload the refrigerator to move it. (This is probably
not necessary when pulling it out to clean behind it.)
Be sure to let the refrigerator warm up to room
temperature, and dry the inside before closing the
doors to pack it for moving. To avoid damaging the
height-adjusting screws, turn them all the way into the
base.
36
Failure
CAREANDCLEANING
REPLACING THE WATER FILTER
It is recommended that you replace the filter
approximately every 6 months, when the water filter
indicator reaches 0 months, or when the ice and
water dispenser noticeably decreases out-put.
1. Remove the old cartridge.
Press the push button to open the filter cover.
_Pull
the cartridge downward.
NOTE : Replacing the filter causes a small
amount of water (around 1 oz. or 25 cc) to
drain. Place a cup under the filter hole to
catch any waste.
i
NOTE : When opened at a full angle the
cartridge should easily come out.
37
CAREANDCLEANING
REPLACING THE WATER FILTER (CONT.)
2. Replace with a new cartridge.
f
i I
Take the new cartridge out of its packing and
remove the protective cover from the o-rings.
_ Firmly lock in the cartridge.
The cover will click back into place.
With cartridge ears in the horizontal position,
push the new filter cartridge into the manifold
hole until it stops.
NOTE: After replacing the filter, flush 2.5 gallons
through filter before use (flush for approximately
5 minutes).
Check the filter for leaks.
0_
CHANGE
FILTFR
s_t Mo._.
NOTE: Filter Bypass Plug
Keep the filter bypass plug.
You must use the filter bypass plug when a
replacement filter cartridge is not available.
The icemaker will not operate without the filter or filter
bypass plug inserted in the proper compartment.
When the water filter indicator displays the
message 0 Filter Month, hold 3 seconds.
Reset the water filter status display and indicator
light by pressing and holding the LIGHT/FILTER
button for at least 3 seconds.
Filter Bypass Plug
To purchase replacement water filter cartridges,
visit your local appliance dealer or parts distributor.
You can also call USA 1-800-243-0000
CANADA 1-888-LGCANADA
7 days per week).
(24 hours per day/
The replacement water filter cartridge's part
number is ADQ36006101.
38
CAREANDCLEANING
Performance
Model:
LG ADQ36006101-S
Data Sheet
Use Replacement Cartridge: ADQ36006101
The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal
to the permissible limit for water leaving the system as specified in NSF/ANSI Standard 42 and Standard 53.
of substances
listed
I reduction
ystem tested
and certified
by below.
NSF International against NSF/ANSI Standard 42 and Standard 53 for the
Contaminant
Reduction
Average
Influent
NSF specified Challenge
Concentration
Avg %
Reduction
Average
Product Water
Concentration
Max Permissible
Product Water
Concentration
NSFReduction
NSF Test
Requirements
Report
Chlorine Taste and Odor
2.t mg/L
2.0 mg/L _+10%
97.2%
0.06 mg/L
N/A
_>50%
J-00049247
Nominal Particulate Class I,,
5,600,000
At least 10,000particles/mL
98.7%
73,000 pts/ml
N/A
_>85%
J-00049282
107to 10" MFL; fibers greater
>99%
< 1MLF
N/A
_>99%
J-0004928
_>0,5to < 1,0pm
pts/mL
Asbestos
190MFL
than 10/_m in length
Atrazine
0.0094mg/L
0.009 mg/L _+10%
94.7%
0.00005 mg/L
0.003 mg/L
N/A
J-00049293
Benzene
0.0t6 mg/L
0.015 mg/L _+10%
96.7%
0.005 mg/L
0.005 mg/L
N/A
J-00049300
Carbofuran
0.08mg/L
0.08 mg/L _+10%
98.1%
0.002 mg/L
0.04 mg/L
N/A
J-00049294
Lindane
0.002mg/L
0.002 mg/L _+10%
98.2%
0.00004 mg/L
0.0002 mg/L
N/A
J-00051975
P-Dichlorobenzene
0.22mg/L
0.225 mg/L _+10%
99.8%
0.0005 mg/L
0.075 mg/L
N/A
J-00049298
Toxaphene
0.0t4 mg/L
0.015 mg/L _+10%
93%
0.001 mg/L
0.003 mg/L
N/A
J-00049302
2,4-D
0.213mg/L
0.210 mg/L _+10%
95.2%
0.009 mg/L
0.07 mg/L
N/A
J-00049284
Lead pH @6,5
0.t50 mg/L
0.15 mg/L _+10%
>99.3%
0.001 mg/L
0.010 mg/L
N/A
J-00051974
Lead pH @8,5
0.t50 mg/L
0.15 mg/L _+10%
>99.3%
0.001 mg/L
0.010 mg/L
N/A
J-00049277
Mercury @ pH 6,5
0.0059mg/L
0.006 mg/L _+10%
96.1
0.0002 mg/L
0.002 mg/L
N/A
J-00053886
Mercury @ pH 8,5
0.0058mg/L
0.006 mg/L _+10%
90.1
0.0006 mg/L
0.002 mg/L
N/A
J-00051972
120,000cysts/L
Minimum50,000 cysts/L
99.99%
<1 cyst/L
N/A
_>99,95%
J-00049281
Cyst*
* Based on the use of Cryptosporidium parvum oocysts.
39
CAREANDCLEANING
Application Guidelines/Water Supply Parameters
Service Flow
0.5 gpm (1.9 Ipm)
Water Supply
Potable Water
Water Pressure
20 -120 psi (138 - 827 kPa)
Water Temperature
33°F - 100°F (0.6°C - 38°C)
It is essential that the manufacturer's recommended
installation, maintenance and filter replacement
requirements be carried out for the product to perform
as advertised.
Note: While the testing was performed under
standard laboratory conditions, actual performance
may vary.
Replacement Cartridge: ADQ36006101
For estimated costs of replacement elements
please call USA 1-800-243-0000 CANADA 1-888LGCANADA (24 hours per day/7 days per week)
or visit our website at USA us.lge.com
CANADA www.lge.ca
3M is a trademark of 3M Company.
NSF is a trademark of NSF International.
© 2009 3M Company. All rights reserved.
&WARNING
To reduce the risk associated with ingestion of
contaminants: Do not use with water that is
microbiologically unsafe or of unknown quality
without adequate disinfection before and after the
system. Systems certified for cyst reduction may be
used on disinfected water that may contain filterable
cysts. EPA Establishment Number 10350-MN-005
&CAUTION
To reduce the risk associated with property
damage due to water leakage:
• Read and follow. Use Instructions before
installation and use of this system.
• Installation and use MUST comply with all state and
local plumbing codes.
• Do not install if water pressure exceeds 120 psi
(827 kPa). If your water pressure exceeds 80 psi,
you must install a pressure limiting valve. Contact a
plumbing professional if you are uncertain how to
check your water pressure.
• Do not install where water hammer conditions may
occur. If water hammer conditions exist you must
install a water hammer arrester. Contact a plumbing
professional if you uncertain how to check for this
condition.
• Do not install on hot water supply lines. The
maximum operating water temperature of this filter
system is 100°F (38°C).
• Protect filter from freezing. Drain filter when
temperatures drop below 40°F (4.4°C).
• The disposable filter cartridge must be replaced
every 6 months, at the rated capacity or if a
noticeable reduction in flow rate occurs.
Manufactured for LG®Electronics by CUNO
Incorporated 400 Research Parkway Meriden,
CT 06450 U.S.A Worldwide: 203-237-5541
www.cuno.com
4O
CAREANDCLEANING
State of California
Department
of Public Health
Water Treatment Device
Certificate Number
09- 2018
Date Issued:
Trademark/Model
Designation
December
15, 2009
......... RepiacementElements
ADQ36006101-S
Manufacturer:
Cuno Inc.
The water treatment
116830 of the Health
Microbiological
device(s) listed on this certificate
havemet
the t_sting requirements
and Safety C0de for the tbilowing health related
contaminants:
Contaminants
and
pursuant
to Section
Turbidity
Cysts
Organic
Contaminants
B enz erie
Carbofuran
Lindane
p-Dichlorobenzene
Toxaphene
Rated
Service
Capacity:
200 gal
Rated
Service
Flowi
0.5 gpm
41
IROUB/ESHOOIING
BEFORE CALLING FOR SERVICE
Before calling for service, review this list. It may save you both time and expense. This list includes
common occurrences
that are not the result of defective workmanship
or materials in this appliance.
\
42
Refrigerator
compressor does
not run.
• Plug at the wall outlet is
disconnected.
• Make sure the plug is tightly pushed into the
outlet.
• Power outage. Check house
lights.
• Call the local electric company.
Refrigerator
compressor runs
too frequently or
too long.
• Refrigerator is larger than the
previous one you owned.
• This is normal. Larger, more efficient units run
longer.
• The room or the outdoor
weather is hot.
• It is normal for the refrigerator to work longer
under these conditions.
• Refrigerator was recently
disconnected for a while.
• It takes a few hours for the refrigerator to reach
cooling temperatures.
• Large amounts of warm or
hot food may have been
stored recently.
• Warm food will cause the refrigerator to run longer
until the desired temperature is reached.
• Doors are opened too
frequently or for too tong.
• Warm air entering the refrigerator causes it to run
more. Open the door less often.
• Refrigerator or freezer door
may be slightly open.
• Make sure the refrigerator is level. Keep food and
containers from blocking the door.
• Refrigerator control is set too
cold.
• Adjust the refrigerator control to a warmer setting
until the refrigerator temperature is satisfactory.
• Refrigerator or freezer gasket
is dirty, worn, cracked, or
poorly fitted.
• Clean or change the gasket. Leaks in the door
seal will cause the refrigerator to run longer in
order to maintain desired temperatures.
Refrigerator
compressor
cycles on and off.
• The thermostat is keeping the
refrigerator at a constant
temperature.
• This is normal. The refrigerator cycles on and off
to keep the temperature constant.
Temperature in
the freezer is too
cold, but the
refrigerator
temperature is
satisfactory.
• Freezer control is set too
cold.
• Adjust the freezer control to a warmer setting until
the freezer temperature is satisfactory.
Temperature in
the refrigerator is
too cold, but the
freezer
temperature is
satisfactory.
• Refrigerator control is set too
cold.
• Adjust the refrigerator control to a warmer setting.
J
IROUB/ESHOOIING
BEFORE CALLING FOR SERVICE (CONT.)
Food stored in
refrigerator
drawers freezes.
• Refrigerator control is set too
cold.
• Adjust the refrigerator to a warmer setting.
Temperatures in
the refrigerator or
freezer are too
warm.
• Freezer or refrigerator control
is set too warm.
• Adjust the freezer or refrigerator control to a
colder setting until the freezer or refrigerator
temperature is satisfactory.
• Doors are opened too
frequently or for too long.
• Warm air enters the refrigerator/freezer whenever
the door is opened. Open the door less often.
• Door is slightly open.
• Close the door completely.
• Large amounts of warm or
hot food may have been
stored recently.
• Refrigerator has recently
been disconnected for a
period of time.
• Wait until the refrigerator or freezer has had a
chance to cool food to the set temperature.
Temperature in
the refrigerator
is too warm,
but the freezer
temperature is
satisfactory.
• Refrigerator control is set too
warm.
• Adjust the refrigerator control to a colder setting.
Louder sound
levels when
compressor
comes on.
• Refrigerator operates at
higher pressures during the
start of the ON cycle.
• This is normal.
Vibrating or
rattlingnoise.
• Floor is uneven or weak. The
refrigerator rocks on the floor
when it is moved slightly.
• Be sure floor is level and solid and can adequately
support the refrigerator.
• Dishes are vibrating on the
shelves in the refrigerator.
• It is normal for dishes to vibrate slightly. Move
dishes slightly. Make sure refrigerator is level and
firmly set on floor.
• The refrigerator is touching
the watt or cabinets.
• Move the refrigerator so that it does not touch the
wall.
• The weather is hot and humid
which increases the rate of
frost buildup and internal
sweating.
• This is normal.
• Door is slightly open.
• Close the door.
• Door is opened too often or
for too long.
• Open the door less often.
• Weather is humid.
• This is normal in humid weather. When humidity is
lower, the moisture should disappear.
• Door is slightly open.
• Close the door completely.
Moisture collects
on the inside walls
of the refrigerator.
Moisture forms on
the outside of the
refrigerator or
between the doors.
• It takes a few hours for the refrigerator to reach
the set temperatures.
J
43
IROUB/ESHOOIING
BEFORE CALLING FOR SERVICE (CONT.)
Moisture forms
on the dispenser.
Odors in the
refrigerator.
• Moisture may form when the
temperature or humidity are
high.
• Wipe off the moisture.
• Interior needs to be cleaned.
• Clean interior with sponge, warm water, and baking
soda. Be sure the soda is completely dissolved so
it wilt not act as an abrasive compound.
• Food with strong odor is in
the refrigerator.
• Some containers and
• Cover food completely.
wrapping materials produce
odors.
The door(s) will
not close.
• Use a different container or brand of wrapping
materials.
• Food package is keeping the
door open.
• Move the packages that keep the door from
closing.
• Door was closed too hard,
causing other door to open
slightly.
• Gently close both doors.
• Refrigerator is not level. It
rocks on the floor when it is
moved slightly.
• Adjust the height-adjusting
• Floor is uneven or weak. The
refrigerator rocks on the floor
when it is moved slightly.
• Be sure the floor is level and can adequately
support the refrigerator. Contact a carpenter to
correct sagging or sloping floor.
• Refrigerator is touching the
wall or the cabinets.
• Move the refrigerator.
• Food is touching the shelf on
top of the drawer.
• Keep less food in the drawer.
• The drawer track is dirty.
• Clean the drawer and the track.
• The water has been in the
tank for too long.
• Dispense for 2 minutes and discard to freshen the
supply. Dispense and discard for an additional 2
minutes to rinse the tank completely.
• The unit is not properly
connected to cold water line.
• Connect the unit to a cold water line that supplies
water to the kitchen faucet.
• When a filter is old.
• Replace with a new filter.
Sound of ice
dropping.
• A batch of ice has been
released into the ice bin.
• This sound is made when automatically made ice is
dropped into the ice storage bin. The volume may
vary according to the location of the refrigerator.
Sound of water
trickling.
• The icemaker is being
supplied with water.
• This sound is normally made when the icemaker is
supplied with water after dropping the automatically
made ice.
Drawers are
difficult to move.
Water has an odd
taste and/or odor.
screw.
• If this sound lasts more than 10 seconds, check for
a leak.
44
j
IROUB/ESHOOIING
BEFORE CALLING FOR SERVICE (CONT.)
The icemaker is
• New installation.
• Wait 24 hours after ice maker installation for ice
not producing ice
or not enough ice
production to begin. Wait 72 hours for full ice
production.
• Refrigerator is not connected
to a water supply and the
supply shutoff valve is not
turned on.
• Connect refrigerator to water supply and turn
water shutoff valve fully open.
• Reverse osmosis water
filtration system is connected
to your cold water supply.
• This can decrease water pressure and a little
water comes to icemaker.
• Kink in the water source line.
• A kink in the line can reduce water flow.
Straighten the water source line.
• Large amount of ice recently
has been removed.
• Allow 24 hours for ice maker to produce more ice.
• The icemaker is not turned
• On the icemaker itself, there should be a power
switch. It may have an 'T' and "0" on it. The 'T'
position is on. If it is off, please flip it to the on
position.
on.
• There is Something on the
Ice-detecting sensor.
• Foreign substance or frost on thelce-detecting
sensor stops making ices. To keep making ice,
clean up the surface of Ice-detecting sensor with
clean and soft fabric.
• The temperature setting is
too warm on Freezer.
• Below -1 °F is recommended temperature setting
of the freezer compartment for normal ice
production. If the freezer temperature is set at a
warmer temperature, then the ice will produce at a
slower rate.
• The doors are opened often.
• If the doors of the unit are opened often, the cold
air wilt escape which will prevent the unit from
maintaining the set temperature. Lowering the
temperature can help, as well as not opening the
doors as frequently.
• Any door is not closing
properly.
• The door that is not closed properly, makes the
Freezer temperature high and icemaker wilt make
ices slowly.
• The ice compartment
not closing properly.
door is
• Ice Plus is not selected.
• The compartment door, that is not closed properly,
make the compartment temperature high and
icemaker makes ices slowly.
• With this option, the cold air in the compartment
increased as is ice production.
is
J
45
IROUB/ESHOOIING
BEFORE CALLING FOR SERVICE (CONT.)
....................................................
))))))
!
Not dispense ice
• All the doors are not closed
completely.
• If any door is not closed completely, any ice is not
dispensed.
• The dispenser is locked on
display.
• If the dispenser is locked, ice will not dispense. Look
at the right side of the control panel to see if the lock
is engaged. Press and hold the lock button on the
control panel until there is a "ding" sound. Try to
dispense again. Once unlocked, the dispenser
should dispense ice.
• The ice dispenser is used
infrequently.
• Infrequent use of the ice dispenser will cause the
cubes to stick together over time, which will prevent
them from properly dispensing. Check the ice bin for
ice cubes clumping/sticking together. If they are,
break up the ice cubes by removing the bin and
breaking them up or shaking the bin to separate
them.
• Ice bin is not installed correctly.
• Sure the ice bin is firmly in position.
• New installation.
• Wait 24 hours after ice maker installation for ice
production to begin. Wait 72 hours for full ice
production.
Dispense hot
water
• Ices are stuck in the delivery
chute.
• Use a plastic utensil to clear the delivery chute.
• The wrong-sized ice has been
added to the ice bin.
• Use only cubes produced by the current ice maker.
• The ice dispenser is stalling
while dispensing "crushed" ice.
• Change the ice button from "crushed" to "cubed".
If cubed ice dispenses correctly, depress the button
for "crushed" ice and begin dispensing again.
• New installation.
• Allow 24 hours after installation for the water
• Water dispenser has been
used continuously within the
last 5_8 hours.
• The unit has its own water tank inside. Water
supply to cool completely.
storage capacity of the water tank is about two
cups of cold water that will be dispensed. While
the cool water is being dispensed, the tap water
comes into water tank and is reserved. At least
6 hours are needed for cooling the tap water
again.
• Recently large amount of
water was dispensed.
• Allow 24 hours for water supply to cool
completely.
• Refrigerator is not connected
to cold water pipe.
• Make sure the refrigerator is connected
water pipe.
to a cold
J
46
IROUB/ESHOOIING
BEFORE CALLING FOR SERVICE (CONT.)
Not dispense
water
• New installation.
• Flush and fill the water system.
• Freezer door is not closed
• If any door is not closed completely, the ice is never
dispensed.
completely.
• Refrigerator is not connected
to a water supply and the
supply shutoff valve is not
turned on.
• Connect refrigerator to water supply and turn water
shutoff valve fully open.
• The water pressure is not
more than 20 psi.
• The water pressure to the home determines the flow
from the dispenser.
• Home filter or reverse osmosis
• This can decrease water pressure. It is
recommended to remove reverse osmosis for
system is used.
normal operation of water dispenser.
• The display is not set properly
for water to come out.
• Look on the right side of the display to see if the
display lock is engaged. If locked, it will not
dispense. Unlock the dispenser, if necessary.
• Water filter need to be
changed.
• The filter should be changed every 6 months or
more often depending on usage. The filter can get
buildup of foreign particles and stow the water
pressure.
• Glass was not being held
under the dispenser long
enough.
• Hold the glass under the dispenser 2 to 3 seconds
after releasing the dispenser lever.
• New installation.
• Flush and fill the water system.
drops of water after
dispensing is
normal.
• Recently water filter was
changed.
• Flush the water system.
Other
Please thoroughly read the Automatic
this manual.
Water is leaking
from the
dispenser.
NOTE: One or two
Icemaker and Operating the Dispenser sections in
J
47
SPECIFICAIIONS
KEY DIMENSIONS AND SPECIFICATIONS
The appearance and specifications listed in this guide may vary due to constant product improvements.
48
Should your LG Refrigerator ("Product") fail due to a defect in materials or workmanship under normal home use, during the warranty period
set forth below, LG will at its option repair or replace the product. This limited warranty is valid only to the original retail purchaser of the
product and applies only when purchased and used within the United States including U.S. Territories. Proof of original retail purchase is
required to obtain warranty service under this limited warranty.
WARRANTY
Refrigerator
(Condenser,
PERIOD
Sealed System
Dryer, Connecting Tube, Refrigerant
Linear Compressor
and Evaporator)
One (t) year from the date of
original retail purchase
One (1) year from the date of
original retail purchase
Seven (7) years from the date of
original retail purchase
Ten (10) years from the date of
original retail purchase
Parts and Labor
(internal/functional parts only)
Parts and Labor
Parts only
(Consumer will be charged for labor)
Part only
(Consumer will be charged for labor)
Noises associated
operating
with normal
operation
the unit in an unsuitable
and failure to follow
environment
instructions
will not be covered
found
under this
in the use and care and installation
guides
or
warranty.
_. Replacementproductsand parts are warrantedfor the remainingportionof the originalwarrantyperiodor ninety(90) days, whicheverisgreater.
_. Replacementproductsand parts may be new or remanufactured.
THIS WARRANTYIS IN LIEUOF ANY OTHERWARRANTY, EXPRESSOR IMPLIED,INCLUDINGWITHOUT LIMITATION,ANY
WARRANTYOF MERCHANTABILITYOR FITNESS FOR A PARTICULARPURPOSE.TOTHE EXTENTANY iMPLIEDWARRANTYIS
REQUIREDBY LAW, iT IS LIMITEDiN DURATIONTO THE EXPRESSWARRANTYPERIODABOVE.NEITHERTHE MANUFACTURER
NOR ITS U.S. DISTRIBUTORSHALL BE LIABLE FOR ANY INCIDENTAL,CONSEQUENTIAL,iNDiRECT,SPECIAL,OR PUNITIVE
DAMAGES OF ANY NATURE,iNCLUDiNGWITHOUT LiMITATiON,LOST REVENUESOR PROFITS,OR ANY OTHERDAMAGE
WHETHERBASED IN CONTRACT,TORT, OR OTHERWISE,Some states do not allowthe exclusionor limitationof incidentalor consequential
damagesor limitationson how long an impliedwarrantylasts, so the above exclusionor limitationmay not applyto you. This warrantygives you
specific legal rightsand you may also haveother rightsthat vary from state to state.
THiS LiMiTED WARRANTY DOES NOT COVER:
1. Service trips to deliver, pick up, install, or repair the product; instruct the
customer on operationof the product; repair or replace fuses or correct
wiring or plumbing, or correction of unauthorized repairs/installation.
2. Failure of product to perform during power failures and interruptions
or inadequate electrical service.
3. Damage caused by leaky or broken water pipes, frozen water pipes,
restricted drain lines, inadequate or interruptedwater supply or inadequate
supply of air.
4. Damage resulting from operating the product in a corrosive atmosphere or
contrary to the instructions outlined inthe product owner's manual.
5. Damage to the product caused by accidents, pests and vermin, lightning,
wind, fire, floods, or acts of God.
6. Damage resulting from misuse, abuse, improper installation, repair,
or maintenance. Improper repair includes use of parts not approved
or specified by LG.
7. Damage or failure caused by unauthorized modificationor alteration, or if it
is used for other than the intended purpose, or any water leakage where
the unit was not properly installed.
8. Damageor failurecaused by incorrectelectricalcurrent, voltage,or plumbing
codes,commercialor industrialuse, or use of accessories,components,or
consumablecleaning productsthatare not approvedby LG.
9. Damage caused by transportation and handling, including scratches,
dents, chips, and/or other damage to the finish of your product, unless
such damage results from defects in materialsor workmanship and is
reported within one (1) week of delivery (Call: 1-800-243-0000).
10. Damage or missing items to any display, open box, discounted, or
refurbished product.
11. Products with original serial numbers that have been removed, altered, or
can not be readily determined. Model and Serial numbers, along with
original retailsales receipt, are required for warranty validation.
12. Increases in utilitycosts and additional utilityexpenses.
13. Replacement of light bulbs, filters, or any consumable parts.
14. Repairs when your product is used in other than normal and usual
household use (e.g. commercial use, offices, and recreationalfacilities) or
contrary to the instructions outlined in the product owner's manual.
15. Costs associatedwith removal of your product from your home for
repairs.
16. The removal and reinstallationof the product if it is installed in an
inaccessible location or is not installed in accordance with published
installation instructions, including LG's owner's and installation manuals.
17. Shelves, door bins, drawers, handles, accessories,and other parts
besidesA,those that were originally included with this particular model.
The cost of repair or replacement under these excluded circumstances
shall be borne by the consumer.
For complete warranty details and customer assistance,
please call or visit our website:
Write your warranty information below:
Call 1-800-243-0000 (24 hours a day, 365 days a year) and select the appropriate
option from the menu, or visit our website at http://us.lgservice.com
Or by mail: LG Customer Information Center:
P. O. Box 240007, 201 James Record Road Huntsville, Alabama 35813
ATTN: CIC
Product Registration Information:
Model:
Serial Number:
Date of Purchase:
49
WARRANTY: Should your LG Refrigerator ("Product") fail due to a defect in material or workmanship under normal home use during the
warranty period set forth below, LG Canada will at its option repair or replace the Product upon receipt of proof of original retail purchase.
This warranty is valid only to the original retail purchaser of the product and applies only to a Product distributed in Canada by LG Canada or
an authorized Canadian distributor thereof. The warranty only applies to Products located and used within Canada.
WARRANTY
PERIOD:
(Note: If the original date of purchase can not be verified,
the warranty will begin sixty (60) days from the date of manufacture)
Refrigerator/Freezer
(Condenser,
Sealed System
Dryer, Connecting Tube, Refrigerant
Linear Compressor
and Evaporator)
One (1) year from the date of
original retail purchase
One (1) year from the date of
original retail purchase
Seven (7) years from the date of
original retail purchase
Ten (10) years from the date of
original retail purchase
Parts and Labor
(internal/functional parts only)
Parts and Labor
Parts only
(Consumer will be charged for labor)
Part only
(Consumer will be charged for labor)
Noises associated with normal operation and failure to follow instructions found in the use and care and installation guides or
operating the unit in an unsuitable environment will not be covered under this warranty.
Replacementproductsand partsarewarrantedforthe remainingportionof theoriginalwarrantyperiodor ninety(90)days,whicheveris greater.
Replacementproductsand partsmaybe newor remanufactured.
LG AuthorizedServiceCenterwarrantiestheirrepairworkbr thirty(30)days.
LG CANADA'SSOLELIABILITYIS LIMITEDTO THEWARRANTYSETOUTABOVE.EXCEPTAS EXPRESSLYPROVIDEDABOVE,LG
CANADAMAKESNO AND HEREBYDISCLAIMSALL OTHERWARRANTIESAND CONDITIONSRESPECTINGTHE PRODUCT,WHETHER
EXPRESSORIMPLIED,INCLUDING,BUTNOT LIMITEDTO, ANYIMPLIEDWARRANTYORCONDITIONOFMERCHANTABILITY
OR FITNESS
FORA PARTICULARPURPOSE,AND NOREPRESENTATIONS
SHALL BE BINDINGON LG CANADA.LG CANADADOESNOTAUTHORIZE
ANY PERSONTO CREATEORASSUMEFORIT ANY OTHERWARRANTYOBLIGATIONOR LIABILITYIN CONNECTIONWITHTHE
PRODUCT.TO THE EXTENTTHATANYWARRANTYORCONDITIONISIMPLIEDBY LAW, IT IS LIMITEDTOTHE EXPRESSWARRANTY
PERIODABOVE.LG CANADA,THEMANUFACTURERORDISTRIBUTORSHALLNOTBE LIABLEFORANY INCIDENTAL,CONSEQUENTIAL,
SPECIAL,DIRECTORINDIRECTDAMAGES,LOSSOFGOODWILL,LOSTPROFITS,PUNITIVEOR EXEMPLARYDAMAGESORANY OTHER
DAMAGE,WHETHERARISINGDIRECTLYORINDIRECTLYFROMANYCONTRACTUALBREACH,FUNDAMENTALOROTHERWISE,OR
FROMANYACTS OROMISSIONS,TORT,OR OTHERWISE.Thiswarrantygivesyouspecificlegalrights.You mayhaveotherrightswhichmayvary
fromprovincetoprovincedependingon applicableprovinciallaws.Anytermof thiswarrantythat negatesor variesanyimpliedconditionor warranty
underprovinciallaw isseverablewhereit conflictswithprovinciallawwithoutaffectingtheremainderof this warranty'sterms.
THIS LIMITED
WARRANTY
DOES NOT COVER:
1. Servicetripsto deliver,pickup, or installthe product;instructinga customeron
operationof the product;repairor replacementof fusesor correctionof wiringor
plumbing,or correctionof unauthorizedrepairs/installation.
2. Failureof the productto performduringpowerfailuresandinterruptionsor
inadequateelectricalservice.
3. Damagecausedbyleakyor brokenwaterpipes,frozenwaterpipes,restricted
drainlines,inadequateor interruptedwatersupplyor inadequatesupplyof air.
4. Damageresultingfromoperatingthe Productina corrosiveatmosphereor
contraryto the instructionsoutlinedinthe Productowner'smanual.
5. Damageto the Productcausedbyaccidents,pestsandvermin,lightning,wind,
fire,floods,or actsof God.
6. Damageresultingfromthe misuse,abuse,improperinstallation,repair,or
maintenanceofthe Product. Improperrepairincludesuseof partsnot approved
or specifiedby LGCanada.
7. Damageor productfailurecausedby unauthorizedmodificationor alteration,or
useforotherthan its intendedpurpose,or resultingfrom anywaterleakagedue
to improperinstallation.
8. Damageor Productfailurecausedbyincorrectelectricalcurrent,voltage,or
plumbingcodes,commercialor industrialuse,or use of accessories,
components,or cleaningproductsthatare notapprovedbyLG Canada.
9. Damagecausedbytransportationand handling,includingscratches,dents,
chips,and/orotherdamagetothe finishof yourproduct,unlesssuchdamage
resultsfrom defectsinmaterialsor workmanshipandis reportedwithinone(1)
weekof delivery.
10.Damageor missingitemsto any display,open box,discounted,or refurbished
Product.
11. Productswithoriginalserialnumbersthathavebeenremoved,altered,or cannot
be readilydetermined.ModelandSerialnumbers,alongwithoriginalretailsales
receipt,are requiredforwarrantyvalidation.
12. increasesinutilitycostsandadditionalutilityexpenses.
13. Replacementof lightbulbs,filters,or anyconsumableparts.
14. Repairswhenyour Productis usedinotherthan normalandusualhousehold
use (including,withoutlimitation,commercialuse, inofficesor recreational
facilities)or contrarytothe instructionsoutlinedinthe Productowner'smanual.
15.Costsassociatedwithremovalof the Productfromyourhomefor repairs.
16.The removaland reinstallationof the Productif it is installedinan inaccessible
locationor is not installedin accordancewithpublishedinstallationinstructions,
includingthe Productowner'sandinstallationmanuals.
17.Shelves,doorbins,drawers,handles,andaccessoriesto the Product.Also
excludedare partsbesidesthosethatwereoriginallyincludedwiththe Product.
All costs associated with the above excluded circumstances shall be borne by the consumer.
For complete warranty details and
customer assistance, please call or visit
our website: Call 1-888-542-2623 (24 hours
a day, 365 days a year) and select the
appropriate option from the menu, or visit our
website at http://www.lg.ca
50
Write your warranty information below:
Product Registration Information:
Model:
Date of Purchase:
Serial Number:
Life's Good
For
nqures
orco'r_ments,
vstwwwlgecom
or ca
1-800-243-0000
USA,
Consu
1-888-865-3026
USA,
Commercial
1_888_542-2623
CANADA
www.lge.com
_r_er User
User
;
Download PDF

advertising