User Manual - KBC Networks
Extended Ethernet
100 Series Chassis
EE1R3
User Manual
Extended Ethernet User Manual
TABLE OF CONTENTS
1
OVERVIEW ................................................................................. 3
1.1
INTRODUCTION ............................................................................................ 3
1.1.1
EE1R3 ............................................................................................... 3
1.2
TECHNICAL SPECIFICATION .............................................................................. 3
2
INSTALLATION ............................................................................. 4
2.1
PACKAGE CONTENTS ...................................................................................... 4
2.2
CONFIGURATIONS ......................................................................................... 4
2.2.1
Physical Connections ........................................................................... 4
2.3
INSTALLATION METHOD................................................................................... 5
2.3.1
Chassis .............................................................................................. 5
2.4
POWER CONNECTIONS .................................................................................... 5
2.5
LED STATUS ............................................................................................... 6
3
TROUBLESHOOTING ...................................................................... 7
4
SYSTEM INSTALLATION EXAMPLE ...................................................... 7
5
DIMENSIONS ............................................................................... 8
6
WARRANTY ................................................................................ 9
7
6.1
WARRANTY INFORMATION ................................................................................ 9
6.2
CLASS A ITE ............................................................................................ 10
6.3
FCC ....................................................................................................... 10
6.4
UL ......................................................................................................... 10
INSTRUCTION OF DISASSEMBLY ...................................................... 11
Manual-EE1R3_Series-Rev1208A
Copyright © KBC Networks Ltd. 2012
Page 2 of 12
www.kbcnetworks.com
Extended Ethernet User Manual
1 Overview
1.1 Introduction
This manual covers the EE1R3 chassis to be used with the KBC EE1CL series
10/100 Ethernet line drivers.
1.1.1 EE1R3
The EE1R3 chassis allows the KBC EE1CL series, 10/100 Ethernet line drivers to be
mounted in a 2.4U, 19” chassis configuration. The chassis supports up to fifteen
media converters which are hot-swappable. The chassis is provided with an integral
100 ~ 240Vac, 3.3A power supply and an AC power cord. A fan provides air-flow for
system cooling and there are LED indicators for power and fan status.
1.2 Technical Specification
Connectors
Converter Slots
15
Electromagnetic compatibility
Interference
FCC Part 15 Class A, CE
Power
Power Input
Power Consumption
Power Output Per Slot
100 ~ 240Vac, 3.3A
10.7 W / 36BTU – power supply only
88.3W / 301BTU – fully loaded
5V, 1A
Environmental
Operating temperature
0°C - +50°C / 32F° - +122°F
Storage temperature
-40°C - +70°C / -40F - + 158°F
Relative humidity
5% - 90%, Non-condensing
Manual-EE1R3_Series-Rev1208A
Copyright © KBC Networks Ltd. 2012
Page 3 of 12
www.kbcnetworks.com
Extended Ethernet User Manual
2 Installation
2.1 Package Contents

Media converter chassis with integral power supply unit

Mounting brackets for 19” enclosure

Rubber feet

AC power cord

Manual
Note: Extended Ethernet EE1CL units are sold separately.
Please contact you dealer or distributor if a part is missing or damaged within 10 days of
receiving products.
2.2 Configurations
2.2.1 Physical Connections
P1 P2 FA FB
Chassis front view
Chassis rear view
Manual-EE1R3_Series-Rev1208A
Copyright © KBC Networks Ltd. 2012
Page 4 of 12
www.kbcnetworks.com
Extended Ethernet User Manual
2.3 Installation Method
2.3.1 Chassis

Remove all packaging material

If chassis is to be mounted in a 19” enclosure, attach the supplied rack
mount brackets to the converter chassis.

Locate the converter chassis with the 19” mounting rails and attach using
the screws provided.

With the power switch in the ‘OFF’ position, connect the power cord and
then select the ‘ON’ position for the power switch.

Insert the EE1CL units into the EE1R3 chassis as required.

Connect required media cables to the EE1CL devices.
See section 3.5 for LED status.
2.4 Power Connections
This unit must be powered by a 100 ~ 240Vac, 3.3A power supply, this is an integral unit
which is supplied with the chassis.
Manual-EE1R3_Series-Rev1208A
Copyright © KBC Networks Ltd. 2012
Page 5 of 12
www.kbcnetworks.com
Extended Ethernet User Manual
2.5 LED Status
LED
Status
Description
Power
PWR
ON
Power is supplied to the chassis
OFF
No power to the chassis
FAN
FAN A
ON
The fan is functioning correctly
OFF
The fan is not powered or there is a fault with the fan
Note: PWR2 and FAN B LEDs are not used on this product.
Manual-EE1R3_Series-Rev1208A
Copyright © KBC Networks Ltd. 2012
Page 6 of 12
www.kbcnetworks.com
Extended Ethernet User Manual
3 Troubleshooting
When the chassis is powered on, the green PWR LED will light to indicate the
presence of power. If the green light does not come on check that the power switch
is in the ‘ON’ position.
With power to the chassis the green fan light should be lit to show that the fan is
functioning correctly. If the fan LED remains off when the power is on there is a fault
with the Fan please contact KBC Networks.
4 System Installation Example
Figure 4.1 EE1R3 Typical System Installation
Manual-EE1R3_Series-Rev1208A
Copyright © KBC Networks Ltd. 2012
Page 7 of 12
www.kbcnetworks.com
Extended Ethernet User Manual
5 Dimensions
440mm
88.5mm
P1 P2 FA FB
Chassis
depth 140mm
Chassis front view
Chassis rear view
Manual-EE1R3_Series-Rev1208A
Copyright © KBC Networks Ltd. 2012
Page 8 of 12
www.kbcnetworks.com
Extended Ethernet User Manual
6 Warranty
6.1 Warranty Information
KBC extends the following LIMITED WARRANTY to the original owner/purchaser of this
product as follows:
- Five years from the date of initial sale for Ethernet switches.
- Two years from the date of initial sale for all wireless and other network products.
- Five years from the date of initial sale for all fiber products.
1) If, within the specified warranty period, this product, or any part or portion thereof,
shall prove upon examination by KBC, to be defective in material or workmanship,
KBC will repair or replace such part or portion at KBC’s option. The warranty period
on the repaired or replaced part or portion of this product shall be limited to the
unexpired term of the original warranty. The buyer shall be responsible for all
shipping and transportation of the product to KBC for any performance under this
warranty.
2) Conditions and Exceptions:
a) Any accident to this product, any misuse or abuse, alternation, use in modified
form, or any attempt to repair this product shall void this warranty. These
conditions to the warranty include, but are not limited to, incorrect power
connections, physical damage due to mechanical shock, exposure to moisture,
and circuit modification.
b) SHOULD THIS PRODUCT PROVE DEFECTIVE FOLLOWING PURCHASE, THE BUYER,
NOT THE MANUFACTURER, DISTRIBUTOR, OR RETAILER, ASSUMES THE ENTIRE
COST OF ALL SERVICING OR REPAIR, EXCEPT AS OTHERWISE PROVIDED BY THE
TERMS OF THIS WARRANTY.
c) FOR BREACH OF ANY WRITTEN OR IMPLIED WARRANTY ON THIS PRODUCT, THE
BUYER IS LIMITED TO THE FOLLOWING DAMAGES. (1) THE COST OF LABOR TO
REPAIR OR REPLACE DEFECTIVE PARTS OR PORTIONS OF THIS PRODUCT, AND
(2) THE COST OF THE REPAIRED OR REPLACE PARTS OR PORTIONS OF THIS
PRODUCT.
d) NO OTHER EXPRESSED OR IMPLIED WARRANTIES HAVE BEEN MADE OR WILL BE
MADE ON BEHALF OF KBC WITH RESPECT TO THE SALE, REPAIR, INSTALLATION,
OPERATION, OR REPLACEMENT OF THIS PRODUCT. KBC DISCLAIMS ANY
IMPLIED WARRANTY OF MERCHANTABILITY OF THIS PRODUCT OR ITS FITNESS
FOR ANY PURPOSE, AND THE BUYER AGREES THAT THIS PRODUCT IS SOLD “AS
IS” AND THAT THE ENTIRE RISK OF QUALITY AND PERFORMANCE OF THIS
PRODUCT IS WITH THE BUYER, EXCEPT AS OTHERWISE PROVIDED BY THE
TERMS OF THIS WARRANTY.
e) Some states/jurisdictions do not allow exclusions or limitations of incidental or
consequential damages, or limitations on how long an implied warranty lasts, so
the above exclusions or limitations may not apply to you.
f) If you do not wish to be bound by any of the provisions in this warranty, please
return the product(s) immediately.
3) Contact your dealer regarding return authorizations for out of warranty repairs and
any further product information.
This warranty does not apply in Australia.
Manual-EE1R3_Series-Rev1208A
Copyright © KBC Networks Ltd. 2012
Page 9 of 12
www.kbcnetworks.com
Extended Ethernet User Manual
6.2 Class A ITE
This is a Class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
6.3 FCC
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful Interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at this own expense.
6.4 UL
Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly, the
operating ambient temperature of the rack environment may be greater than room
ambient. Therefore, consideration should be given to installing the equipment in an
environment compatible with the maximum ambient temperature (Tma) specified by the
manufacturer.
Reduced Air Flow - Installation of the equipment in a rack should be such that the
amount of air flow required for safe operation of the equipment is not compromised.
Mechanical Loading - Mounting of the equipment in the rack should be such that a
hazardous condition is not achieved due to uneven mechanical loading.
Circuit Overloading - Consideration should be given to the connection of the equipment
to the supply circuit and the effect that overloading of the circuits might have on
overcurrent protection and supply wiring. Appropriate consideration of equipment
nameplate ratings should be used when addressing this concern.
Reliable Earthing - Reliable earthing of rack-mounted equipment should be maintained.
Particular attention should be given to supply connections other than direct connections
to the branch circuit (e.g. use of power strips).
Manual-EE1R3_Series-Rev1208A
Copyright © KBC Networks Ltd. 2012
Page 10 of 12
www.kbcnetworks.com
Extended Ethernet User Manual
7 Instruction of Disassembly
Instruction of Disassembly of KBC Product
(For EU Directive 2002/95/EEC-WEEE)
Tools required:

No. 1 Phillips screwdriver

No. 2 Phillips screwdriver
Steps for disassembly:
1.
2.
3.
4.
Remove screws to cover plate.
Remove cover plate.
Remove mounting screws for printed circuit board (PCB).
Take out all PCBs.
Notice: When a product reaches the end of its life, return to KBC Networks.
Manual-EE1R3_Series-Rev1208A
Copyright © KBC Networks Ltd. 2012
Page 11 of 12
www.kbcnetworks.com
data delivered
KBC Networks
25691 Atlantic Ocean Drive
Suite 3B
Lake Forest, CA 92630
U.S.A
Americas
Phone:
1-949-297-4930
Fax:
1-949-297-4933
KBC Networks Ltd., EMEA
KBC Networks Ltd.
Barham Court
Teston, Maidstone
Kent, ME18 5BZ
United Kingdom
Phone:
+44(0)1622 618787
Fax:
+44(0)20 7100 8147
Email:
[email protected]
Web:
www.kbcnetworks.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement