LG | UX3300 | User's Manual | LG UX3300 User's Manual

UX3300 cover(final).qxd
10/10/06
4:24 PM
Page 1
U X 330 0
ENGLISH
USER GUIDE
Lea este manual cuidadosamente antes de utilizar su teléfono. Guárdelo para
consultarlo en el futuro.
U X 3 3 0 0 MANUAL DEL USUARIO
U X 330 0
USER GUIDE
Please read this manual carefully before operating your mobile
phone. Retain it for future reference.
P/N: MMBB0221301(1.0)
G
ESPAÑOL
UX3300 cover(final).qxd
10/10/06
4:24 PM
Page 3
Copyright ©2006 LG Electronics, Inc. All rights reserved.
LG and the LG logo are registered trademarks of LG Group
and its related entities. All other trademarks are the property
of their respective owners.
UX3300_Eng.qxd
10/9/06
2:57 PM
Page 1
Important Safety Precautions
Read these simple guidelines. Breaking the rules may be dangerous or illegal. Further detailed information is
given in this user guide.
WARNING! Violation of the instructions may cause serious injury or death.
2. Never place your phone in a microwave oven as it will cause the battery to explode.
3. Never store your phone in temperatures less than -4°F or greater than 122°F.
4. Do not dispose of your battery by fire or with hazardous or flammable materials.
5. When riding in a car, do not leave your phone or set up the hands-free kit near to the air bag. If
wireless equipment is improperly installed and the air bag is deployed, you may be seriously
injured.
Important Safety Precautions
1. Never use an unapproved battery since this could damage the phone and/or battery and could
cause the battery to explode.
6. Do not use a hand-held phone while driving.
7. Do not use the phone in areas where its use is prohibited. (For example: aircraft)
1
UX3300_Eng.qxd
10/9/06
2:57 PM
Page 2
Important Safety Precautions
1. Do not expose the battery charger or adapter to direct sunlight or use it in places with high
humidity, such as a bathroom.
2. Do not use harsh chemicals (such as alcohol, benzene, thinners, etc.) or detergents to clean
your phone. This could cause a fire.
Important Safety Precautions
3. Do not drop, strike, or shake your phone severely. It may harm the internal circuit boards of the
phone.
4. Do not use your phone in high explosive areas as the phone may generate sparks.
5. Do not damage the power cord by bending, twisting, pulling, or heating. Do not use the plug if it
is loose as it may cause a fire or electric shock.
6. Do not place any heavy items on the power cord. Do not allow the power cord to be crimped as
it may cause electric shock or fire.
7. Do not handle the phone with wet hands while it is being charged. It may cause an electric
shock or seriously damage your phone.
8. Do not disassemble the phone.
2
UX3300_Eng.qxd
10/9/06
2:57 PM
Page 3
1. Do not place or answer calls while charging the phone as it may short-circuit the phone and/or
cause electric shock or fire.
2. Do not hold or let the antenna come in contact with your body during a call.
3. Make sure that no sharp-edged items such as animal’s teeth or nails, come into contact with
the battery. This could cause a fire.
5. Be careful that children do not swallow any parts (such as rubber plugs, earphone,
connection parts of the phone, etc.) This could cause asphyxiation or suffocation resulting in
serious injury or death.
6. Unplug the power cord and charger during lightning storms to avoid electric shock or fire.
7. Only use the batteries and chargers provided by LG. The warranty will not be applied to
products provided by other suppliers.
Important Safety Precautions
4. Store the battery out of reach of children.
8. Only authorized personnel should service the phone and its accessories. Faulty installation or
service may result in accidents and consequently invalidate the warranty.
9. An emergency call can be made only within a service area. For an emergency call, make sure
that you are within a service area and that the phone is turned on.
3
UX3300_Eng.qxd
10/9/06
2:57 PM
Page 4
Table of Contents
Important Safety
Precautions
Table of Contents
1
4
Making Calls
15
Receiving Calls
16
Quick Access to Convenient
Features
17
The Basics of Storing Contacts
Entries
23
Editing Contacts Entries
26
Table of Contents
Welcome
7
Manner Mode
17
Deleting
28
Important Information
7
Lock Mode
17
Phone Numbers With Pauses
29
FCC RF Exposure Information
9
Mute Function
17
Searching Your Phone’s Memory
30
Volume Quick Adjustment
17
Call Waiting
18
Making a Call From Your Phone’s
Memory
32
Caller ID
18
Speed Dialing
18
Voice Dialing
18
Phone Overview
10
Menus Overview
11
Getting Started with Your
Phone
13
Using Phone Menus
33
Menu Access
33
Contacts
34
The Battery
13
Entering and Editing
Information
19
1. List Contacts
34
Charging the Battery
13
Text Input
19
2. New Number
35
Battery Charge Level
13
Text Input Examples
20
Turning the Phone On and Off
14
3. New E-mail
35
Signal Strength
14
4. Groups
35
Contacts in Your Phone’s
Memory
22
Some of contents in this user guide may be different from your phone depending on the software of the phone
or your service provider. Features and specifications might be subject to change without prior notice.
4
22
Options to Customize Your
Contacts
UX3300_Eng.qxd
10/9/06
5. Speed Dials
2:57 PM
36
6. Voice Dials
36
7. My Contact Info
36
Page 5
7. Erase All
47
1.6 Power On/Off Tone
53
1.7 DTMF Length
53
2. Display
54
Tools
48
1. Schedule
48
2.1 Banner
54
54
Recent Calls
37
2. Alarm Clock
49
2.2 Backlight
1. Dialed Calls
37
3. Voice Memo
49
2.3 Screens
55
2.4 Menu Style
55
38
4. My Shortcut
50
2.5 Clocks
55
3. Missed Calls
38
5. Notepad
50
2.6 Theme Colors
55
4. Erase Calls
38
6. EZ Tip Calc
50
2.7 Contrast
55
7. Calculator
50
2.8 Fonts
56
8. World Clock
50
Settings
51
2.* Status Light
56
57
5. Call Timer
38
Messages
39
1. Voice Mail
40
2.9 Language
56
2.0 Power Saver
56
40
1. Sounds
51
3. System
3. Inbox
42
1.1 Ringers
51
3.1 Select System
57
57
4. Outbox
44
51
3.2 Set NAM
52
3.3 Auto NAM
57
5. Saved
45
1.4 Message Alerts
52
3.4 Serving System
57
6. Msg Settings
45
1.5 Service Alerts
52
4. Security
58
2. New Message
1.2 Key Tone
1.3 Volume
Table of Contents
2. Received Calls
5
UX3300_Eng.qxd
10/9/06
2:57 PM
Page 6
Table of Contents
Table of Contents
6
8. Location
62
Warranty Information
84
58
Phone Info
63
Index
87
59
1. My Phone Number
63
4.5 Erase Contacts
59
2. S/W Version
63
4.6 Reset Default
59
3. Icon Glossary
63
5. Call Setup
59
5.1 Auto Retry
59
4. Shortcut Help
63
Safety
64
TIA Safety Information
64
4.1 Lock Phone
58
4.2 Restrict Calls
58
4.3 Emergency #s
4.4 Change Lock
5.2 Answer Call
59
5.3 Auto Answer
60
5.4 One-Touch Dial
60
5.5 Voice Privacy
60
Safety Information
67
5.6 Auto Volume
60
FDA Consumer Update
70
5.7 TTY Mode
61
10 Driver Safety Tips
77
6. Data Settings
61
Consumer Information on SAR 79
6.1 PC Connection
61
7. Voice Services
62
7.1 Voice Dial Prompt
62
7.2 Train Words
62
FCC Hearing-Aid Compatibility
(HAC) Regulations for Wireless
Devices
80
Accessories
83
UX3300_Eng.qxd
10/9/06
2:57 PM
Page 7
Welcome
Congratulations for choosing the advanced and
compact UX3300 cellular phone, designed to operate
with the latest digital mobile communication
technology, Code Division Multiple Access (CDMA)
and Advanced Mobile Phone Service (AMPS). Along
with the many advanced features of the CDMA
system, such as greatly enhanced voice clarity, this
phone offers:
1. Large, easy-to-read, 7-line backlight LCD with
status icons.
2. Paging, messaging, voice mail, and caller ID.
3. 18-key keypad.
5. Menu-driven interface with prompts for easy
operation and configuration.
6. Any key answer, auto answer, auto retry, onetouch and speed dialing with 99 memory locations.
7. Bilingual (English and Spanish) capabilities.
This user’s guide provides important information on
the use and operation of your phone. Please read all
the information carefully prior to using the phone for
the best performance and to prevent any damage to
or misuse of the phone. Any unapproved changes or
modifications will void your warranty.
FCC Part 15 Class B Compliance
This device and its accessories comply with part 15
of FCC rules. Operation is subject to the following
two conditions: (1) This device and its accessories
may not cause harmful interference, and (2) this
device and its accessories must accept any
interference received, including interference that
causes undesired operation.
Welcome
4. Speaker phone feature.
Important Information
Technical Details
The UX3300 is an all digital phone that operates on
both Code Division Multiple Access (CDMA)
frequencies: cellular services at 800 Mhz and
Personal Communication Services (PCS) at 1.9 Ghz.
Also, the UX3300 works on Advanced Mobile Phone
Service (AMPS). We call it a tri-mode phone. Since
the phone operates on Cellular, PCS and AMPS, the
7
UX3300_Eng.qxd
10/9/06
2:57 PM
Page 8
Welcome
call fail rate is less than on a conventional dualmode or singlemode phone.
CDMA technology uses a feature called DSSS
(Direct Sequence Spread Spectrum) that enables
the phone to keep communication from being
crossed and to use one frequency channel by
multiple users in the same specific area. This
results in a 10-fold capacity increase when
compared with analog mode. In addition, features
such as soft / softer handoff, hard Handoff, and
dynamic RF power control technologies combine
to reduce call interruptions.
Welcome
The Cellular and PCS CDMA networks consist of
MSO (Mobile Switching Office), BSC (Base Station
Controller), BTS (Base Station Transmission
System), and MS (Mobile Station). The following
table lists some major CDMA standards.
CDMA Standard
Basic Air
Interface
8
Description
TIA/EIA-95A
TSB-74
CDMA Tri-Mode Air Interface
14.4kbps radio link protocol and
inter-band operations
ANSI J-STD-008 IS-95 adapted for PCS frequency
band
TIA/EIA-IS2000
cdma2000 1xRTT AirInterface
ANSI TIA/EIA 553A Advanced Mobile Phone Service
Network
TIA/EIA/IS-634
TIA/EIA/IS/651
TIA/EIA/IS-41-C
TIA/EIA/IS-124
MAS-BS
PCSC-RS
Intersystem operations
Non-signaling data comm.
Service
TIA/EIA/IS-96-B
TIA/EIA/IS-99
TIA/EIA/IS-637
TIA/EIA/IS-657
IS-801
TIA/EIA/IS-707-A
Speech CODEC
Async Data and Fax
Short message service
Packet Data
Position Determination
Service (gpsOne)
High Speed Packet Data
TIA/EIA/IS-97
TIA/EIA/IS-98
ANSI J-STD-018
ANSI J-STD-019
TIA/EIA/IS-125
Cellular base station
Cellular mobile station
PCS personal station
PCS base station
Speech CODEC
* TSB-74: Protocol between an IS-95A system and
ANSI J-STD-008
1xRTT system receives twice as many
subscribers in the wireless section as IS-95. Its
battery life is twice as long as IS-95. High-speed
data transmission is also possible.
Designator
Performance
UX3300_Eng.qxd
10/9/06
2:57 PM
Page 9
FCC RF Exposure Information
WARNING! Read this information before operating
the phone.
In August 1996, the Federal Communications
Commission (FCC) of the United States, with its
action in Report and Order FCC 96-326, adopted an
updated safety standard for human exposure to
Radio Frequency (RF) electromagnetic energy
emitted by FCC regulated transmitters. Those
guidelines are consistent with the safety standard
previously set by both U.S. and international
standards bodies.
Vehicle-Mounted External Antenna
(Optional, if available.)
A minimum separation distance of 8 inches (20 cm)
must be maintained between the user / bystander
and the vehicle-mounted external antenna to satisfy
FCC RF exposure requirements. For more information
about RF exposure, visit the FCC website at
www.fcc.gov.
Caution
Bodily Contact During Operation
This device was tested for typical use with the back
of the phone kept 0.6 inches (1.5 cm) from the body.
To comply with FCC RF exposure requirements, a
minimum separation distance of 0.6 inches (1.5 cm)
must be maintained between the user’s body and the
back of the phone, including the antenna, whether
extended or retracted. Third-party belt-clips, holsters
and similar accessories containing metallic
Welcome
The design of this phone complies with the FCC
guidelines and these international standards.
components should not be used. Avoid the use of
accessories that cannot maintain 0.6 inches (1.5 cm)
distance between the user’s body and the back of
the phone and have not been tested for compliance
with FCC RF exposure limits.
Use only the supplied and approved antenna. Use of
unauthorized antennas or modifications could impair
call quality, damage the phone, void your warranty
and/or result in violation of FCC and IC regulations.
Do not use the phone with a damaged antenna. If a
damaged antenna comes into contact with the skin a
minor burn may result. Contact your local dealer for a
replacement antenna.
9
UX3300_Eng.qxd
10/9/06
2:57 PM
Page 10
Phone Overview
Phone Overview
10
Earpiece
Flip Open the case to answer an incoming call and close to end the call.
LCD Screen Displays messages and indicator icons.
Speakerphone Key Use to set the Speakerphone mode.
Headset Jack
Left Soft Key Use to display the function setting menu.
SEND Key Use to place or answer calls.
Side Keys Use to adjust the ringer volume in standby mode and the earpiece
volume during a call.
Voice Dial/Voice Memo Key Use for quick access to Voice Dial, Voice
Memo. Press and hold for about 3 seconds for quick access to Voice Memo.
Manner Mode Key Use to set the Manner Mode (from Main Menu Screen
press and hold
for about 3 seconds).
Navigation Key Use for quick access to Messages, Speaker Phone On/Off,
Schedule and Sounds.
Right Soft Key Use to select an action within a menu.
Message Key Use to retrieve or send voice and text messages.
END/PWR Key Use to turn the power on/off and to end a call. Also use to
return to the standby display screen.
Clear Key Press to delete a single space or character. Press and hold to
delete entire words.
Alphanumeric Keypad Use to enter numbers and characters and select
menu items.
Lock Mode Key Use in Main Menu Screen to set the lock function by
pressing and holding the key
for about 3 seconds.
Microphone
UX3300_Eng.qxd
10/9/06
2:57 PM
Page 11
Menus Overview
2. Recent Calls
3. Messages
4. Tools
1.
2.
3.
4.
5.
6.
7.
1.
2.
3.
4.
1.
2.
3.
4.
5.
6.
1. Schedule
2. Alarm Clock
1. Alarm 1
2. Alarm 2
3. Alarm 3
4. Quick Alarm
3. Voice Memo
4. My Shortcut
5. Notepad
6. Ez Tip Calc
7. Calculator
8. World Clock
List Contacts
New Number
New E-mail
Groups
Speed Dials
Voice Dials
My Contact Info
Dialed Calls
Received Calls
Missed Calls
Erase Calls
1. Dialed Calls
2. Received Calls
3. Missed Calls
4. All Calls
5. Call Timer
1. Last Call
2. Home Calls
3. Roam Calls
4. All Calls
Voice Mail
New Message
Inbox
Outbox
Saved
Msg Settings
1. Auto Save
2. Auto Delete
3. Text-Callback #
4. Voice Mailbox #
5. Signature
6. Auto View
7. Entry Mode
8. Quick-Text
9. Auto Play
7. Erase All
1. Inbox
2. Outbox
3. Saved
4. All
Menus Overview
1. Contacts
11
UX3300_Eng.qxd
10/9/06
2:57 PM
Page 12
Menus Overview
5. Settings
Menus Overview
12
1. Sounds
1. Ringers
2. Key Tone
3. Volume
4. Message Alerts
5. Service Alerts
6. Power On/Off Tone
7. DTMF Length
2. Display
1. Banner
2. Backlight
3. Screens
4. Menu Style
5. Clocks
6. Theme Colors
7. Contrast
8. Fonts
9. Language
0. Power Saver
*. Status Light
3. System
1. Select System
2. Set NAM
3. Auto NAM
4. Serving System
4. Security
1. Lock Phone
2. Restrict Calls
3. Emergency #s
4. Change Lock
5. Erase Contacts
6. Reset Default
5. Call Setup
1. Auto Retry
2. Answer Call
3. Auto Answer
4. One-Touch Dial
5. Voice Privacy
6. Auto Volume
7. TTY Mode
6. Data Settings
1. PC Connection
7. Voice Services
1. Voice Dial Prompt
2. Train Words
8. Location
6. Phone Info
1.
2.
3.
4.
My Phone Number
S/W Version
Icon Glossary
Shortcut Help
UX3300_Eng.qxd
10/9/06
2:57 PM
Page 13
Getting Started with Your Phone
The Battery
Note
It is important to fully charge the battery before initial use
of the phone.
Installing the Battery
To install the battery, insert the battery into the
opening on the back of the phone. Put the battery
cover on the battery and push it slightly upwards.
Removing the Battery
Turn the power off. Lift the release latch to detach
the battery.
To use the charger provided with your phone:
Warning! Use only the charger provided with the
phone. Using any charger other than the one included
with the UX3300 may damage your phone or battery.
1. Plug the end of the adapter into the phone’s charger
port and the other end into an electrical outlet.
2. The charge time varies depending upon the
battery level. The maximum charge time for a fully
discharged battery is 3.5 hours.
Battery Charge Level
The battery charge level is shown at the top right of
the LCD screen. When the battery charge level
becomes low, the low battery sensor alerts you in
three ways: sounding an audible tone, blinking the
battery icon, and displaying Low Battery. If the
battery charge level becomes exceedingly low, the
phone automatically switches off and any function in
progress is not saved.
Fully Charged
Getting Started with Your Phone
The phone comes with a rechargeable battery. Keep
the battery charged while not in use in order to
maximize talk and standby time. The battery charge
level is shown at the top of the LCD screen.
Charging the Battery
Fully Discharged
13
UX3300_Eng.qxd
10/9/06
2:57 PM
Page 14
Getting Started with Your Phone
Changing the face plate
To change the face plate,
hold the phone as shown
in the picture and slide it
downwards and off to
detach.
Turning the Phone On and Off
The phone is now ready
for the new plate. Slide
the new plate upwards
fully until it clicks.
Turning the Phone On
1. Install a charged battery or connect the phone to
an external power source such as a vehicle
power charger or hands-free car kit.
Getting Started with Your Phone
2. Press
for a few seconds until the LCD
screen lights up.
Note
Like any other radio device, avoid any unnecessary contact
with the antenna while your phone is on.
slot
Turning the Phone Off
1. Press and hold
until the display turns off.
Signal Strength
Call quality depends on the signal strength in your
area. The signal strength is indicated on the screen
as the number of bars next to the signal strength
icon: The more bars, the better the signal strength. If
the signal quality is poor, move to an open area. If
you are in a building, the reception may be better
near a window.
14
UX3300_Eng.qxd
10/9/06
2:57 PM
Page 15
Screen Icons
Making Calls
When the phone is powered on, the top line of the
LCD screen displays icons indicating the status of
the phone.
1. Make sure the phone is turned on. If not, press
for about 3 seconds.
Signal strength indicator. The strength of the signal received
by the phone is indicated by the number of bars displayed.
In call state indicator. A call is in progress.
* No icon indicates the phone is in Main Menu Screen.
No service indicator. The phone is not receiving a system signal.
3. Press
.
lf the phone is locked, enter the lockcode.
Call Failed - indicates the call did not go through.
Restricted - indicates outgoing calls are in
restricted mode.
New text msgs
New text & voice
New voice mails
Data Session
Silence all
Manner Mode
Roaming
Speaker On
IS-2000
Alarm
Digital
Analog
Voice privacy
TTY
Location on
E911 only
Note
If the phone is restricted, you can only dial phone
numbers saved in the Emergency Numbers or your Contacts.
To turn off this function:
Menu ->
Code ->
4. Press
Getting Started with Your Phone
Battery strength indicator. Indicates battery charge level.
2. Enter the phone number (include the area code if
needed).
Settings ->
Security -> Enter Lock
Restrict Calls -> Off
to end the call.
15
UX3300_Eng.qxd
10/9/06
2:57 PM
Page 16
Getting Started with Your Phone
Correcting Dialing Mistakes
If you make a mistake while dialing a number, press
once to erase the last digit entered or hold
down
for at least 2 seconds to delete all digits.
Redialing Calls
Getting Started with Your Phone
1. Press
twice to redial the last number you
dialed. The last 30 numbers are stored in the call
history list and you can also select one of these to
redial.
Receiving Calls
1. When the phone rings or vibrates press
answer.
Note
If you press
or the side keys while the phone is
ringing, the ringing or vibration is muted for that call.
2. Press
16
twice to end the call.
to
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 17
Quick Access to Convenient Features
Manner Mode
Lock Mode Quick Cancellation
Use Manner Mode in public places. When Manner
Mode is set,
is displayed on the screen, the key
tones are silent, and the phone is set to vibrate.
1. Press Right Soft Key
4-digit password.
for 3
The Mute function prevents the other party from
hearing your voice, but allows you to hear the other
party.
Manner Mode Quick Cancellation
Mute Quick Activation
1. Press
1. Press Left Soft Key
to switch to Normal Mode.
Lock Mode
Mute Quick Cancellation
Use Lock Mode to prevent others from using your
phone. When Lock Mode is set, your 4-digit
password is required to use the phone.
1. Press Left Soft Key
Note
The lock code/password is the last 4 digits of your phone
number by default.
Lock Mode Quick Activation
1. From Main Menu Screen, press
seconds.
for 3
Mute during a call.
Unmute again.
Volume Quick Adjustment
Quick Access to Convenient Features
Mute Function
Manner Mode Quick Activation
1. From Main Menu Screen press
seconds.
Unlock then enter your
Use the side keys to adjust the earpiece and ringer
volumes. The upper key increases the volume and
the lower key decreases the volume.
G
Earpiece volume can be adjusted during a call.
Note
Key beep volume is adjusted through the Menu.
17
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 18
Quick Access to Convenient Features
Quick Access to Convenient Features
18
Call Waiting
Dialing Single Digit Speed Dials (from 1 to 9)
Your cellular service may offer call waiting. While a
call is in progress, two beeps indicate another
incoming call. When call waiting is enabled, you may
put the active call on hold while you answer the
other incoming call. Check with your cellular service
provider for information about this function.
Press and hold the Speed Dial number.
OR
Enter the Speed Dial number and press
.
Dialing Double Digit Speed Dials (from 10 to 99)
1. Press
to receive a waiting call.
Press the first digit and then press and hold the key
of the last digit.
2. Press
again to switch between calls.
OR
Caller ID
Enter the first and second digits and press
.
Caller ID displays the phone number or name of the
incoming call. If the caller’s identity is stored in
Contacts, the name appears with the number. Check
with your service provider to ensure they offer this
feature.
Voice Dialing
Speed Dialing
To make a Voice Dial call:
Speed dialing is a convenient feature that allows you
to make phone calls quickly and easily with a few
keytrokes. Your phone recalls the number from your
Contacts, displays it briefly, and then dials it. Speed
Dial Number 1 is assigned to Voice Mail by default.
1. From Main Menu Screen, press the Voice Dial key
( ).
Voice Dialing is a convenient feature that allows you
to make phone calls quickly and easily by saying a
voice command that you have recorded in your
Contacts.
2. Say the recorded Voice Dial command.
The phone confirms and dials the phone number.
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 19
Entering and Editing Information
Text Input
Text Input Modes
You can input and edit your Banner, Schedule,
Contacts, Notepad and Messages.
There are five modes for entering text, numbers,
special characters, and punctuation. In a text entry
field, pressing Right Soft Key (or Left Soft Key
)
displays a pop-up list of text modes.
Key Functions
)
T9Word -> Abc -> 123 -> Symbols -> Smiley
Shift : Press to change case.
T9 text : T9Word -> T9WORD -> T9word
Abc text : Abc -> ABC -> abc
Next : In T9 mode, press to display other
matching words.
Space : Press to complete a word and insert
a space.
Clear : Press to delete a single space or
character. Hold to delete words.
Punctuation : In T9 mode, press to insert
punctuation in a word and complete a
sentence.
T9Word (T9) Mode
Use to type text using one keystroke per letter. The
phone translates keystrokes into common words by
using the letters on each key and a compressed
database.
Abc (Multi-tap) Mode
Use to add words to the T9 database.
123 (Numbers) Mode
Use to type numbers using one keystroke per number.
Symbols Mode
Use to insert special characters or punctuation. There
are 39 special characters including “SP ” which inserts
a space and “LF” which forces the text to the next line.
Entering and Editing Information
(
Left Soft Key (Right Soft Key) : Press to scroll
through the following text input modes:
Smiley Mode
Use to insert smiley graphics. There are 40 smiley
characters.
19
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 20
Entering and Editing Information
Entering and Editing Information
20
Changing Letter Case
Using Abc (Multi-tap) Text Input
Using T9 and Abc text input modes you can set the
capitalization. Press
to cycle through the
following.
1. Press Right Soft Key
Initial Cap (T9Word / Abc)
Only the first letter is capitalized. All subsequent
letters are lower case.
Caps Lock (T9WORD / ABC)
All letters are capitalized.
Lower Case (T9word / abc)
All letters are in lower case.
Text Input Examples
Display the text modes and select a text mode:
1. In a text entry field, press Right Soft Key (or Left
Soft Key ) to display text modes.
2. Press
use.
to highlight the text input mode you want to
3. Press
mode.
to select the highlighted text input
(or Left Soft Key
) to
change to Abc mode.
2. Press
to change to ABC Caps Lock.
3. Press
LG is displayed.
.
Using T9 Mode Text Input
1. Press Right Soft Key
(or Left Soft Key
change to T9Word mode.
2. Press
.
3. Press
to complete the word and add a
space.
4. Press
.
Call the office is displayed.
) to
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 21
Using the NEXT Key
After you have finished entering a word, if the word
displayed is not the one you want, press
to
display additional choices of words from the
database.
6. Press
.
cor is displayed.
.
2. Press
.
The display gives you additional choices such as:
Home, Gone, Hood, etc.
Adding Words to the T9 Database
If a word is not in the T9 database, add it by using Abc
(Multi-tap) mode text entry.
1. Press Right Soft Key (or Left Soft Key
change to Abc (Multi-tap) mode.
2. Press
Bop is displayed.
.
) to
Entering and Editing Information
1. Press
Good is displayed.
5. Press
cop is displayed.
.
3. Press Right Soft Key (or Left Soft Key
) to
change to T9 mode to add the word Bop to the T9
database.
4. Press
to erase the existing word.
21
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 22
Contacts in Your Phone’s Memory
Contacts Entries
This allows you to have easy access to your most frequently
dialed phone numbers. You may store up to 300 entries with
up to 5 phone numbers each. Each entry may be up to 22
characters. Each phone number may be up to 48 digits.
Contacts in Your Phone’s Memory
The Basics of Storing Contacts Entries
1. From Main Menu Screen enter
the phone number you want to
save (up to 48 digits).
2. Press Left Soft Key
Save.
3. Use
to select a Label and
press
.
Home / Home2 / Office / Office2
/ Mobile / Mobile2 / Pager / Fax
/ Fax2 / None
4. Use
to select New Name
or Existing and press
.
Note
Use Existing to add another phone number
to a contact already stored in memory.
22
5. Enter a name for the phone
number (up to 22 characters)
and press
.
A confirmation message is
displayed briefly.
Note
To skip name entry, press
to the next step.
to go
Note
If the information is complete, press
to return to the Main Menu
Screen.
Note
To further customize the Contact entry,
press Left Soft Key Done.
6. Continue saving the entry as a Speed Dial, press
Right Soft Key
to select Set Speed Dial.
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 23
Options to Customize Your Contacts
4. Use
Once basic phone number and name informations are
stored in your Contacts, you can edit and/or customize
the entries.
No Group / Family / Friends / Colleagues / Business /
School
1. Press Right Soft Key
Contacts and use
to
.
Note
You can change the name of the group, add groups, and
delete groups.
Edit to access the Edit
Changing the Call Ringer
3. Use
to highlight the information you want to
customize and press
.
Allows you to identify who is calling by setting
different ringers for different phone numbers in your
Contacts. It is automatically set to the default ringer
when the Contact is saved.
Adding or Changing the Group
Allows you to manage your Contacts entries by
organizing them into groups.
1. Press Right Soft Key
3. Use
1. Press Right Soft Key
Contacts and use
highlight an entry, then press
2. Press Left Soft Key
Done to continue editing
to
.
2. Press Left Soft Key
Edit.
to highlight No Group and press
3. Use
.
Contacts and use
highlight an entry, then press
Contacts in Your Phone’s Memory
press
5. Press Left Soft Key
.
the Contact entry.
hightlight the Contact entry you want to edit , then
2. Press Left Soft Key
Contact screen.
to select the Group and press
to
.
Edit.
to highlight Default Ringer and press
.
23
UX3300_Eng.qxd
10/9/06
4. Use
2:58 PM
Page 24
to select the Ringer Type and press
5. Press Left Soft Key
the Contact entry.
.
Adding or Changing the Memo
Allows you to enter up to 32 characters as a memo to
the Contact entry.
Done to continue editing
1. Press Right Soft Key
highlight an entry, then press
Changing the Message Ringer
Contacts in Your Phone’s Memory
Allows you to identify who is sending you a message
by setting different ringers for different phone
numbers in your Contacts. It is automatically set to the
default ringer when the Contact is saved.
2. Press Left Soft Key
1. Press Right Soft Key
Contacts and use
highlight an entry, then press
.
5. Press Left Soft Key
Contact entry.
2. Press Left Soft Key
to
3. Use
.
Edit.
to highlight Memo and press
4. Enter text and press
to
.
.
Done to continue editing the
Edit.
3. Use
to highlight Default Text Msg Ringer
and press
.
Adding or Changing the Picture ID
Allows the phone to display a picture to identify the
caller.
4. Use
1. Press Right Soft Key
to select the Ringer Type and press
.
5. Press Left Soft Key
the Contact entry.
Contacts and use
highlight an entry, then press
Done to continue editing
2. Press Left Soft Key
3. Use
24
Contacts and use
to
.
Edit.
to highlight Default and press
.
UX3300_Eng.qxd
4. Use
10/9/06
2:58 PM
Page 25
to select a graphic and press
5. Press Left Soft Key
Select.
Done to continue editing the
Contact entry.
1. Press Right Soft Key Contacts and use
highlight an entry , then press
.
2. Press Left Soft Key
Adding Speed Dial
to
Edit.
3. Use
to highlight the phone number you want to set
with Voice Dial and presss
.
4. Press Right Soft Key
Edit.
to
5. Press
Options.
Set Voice Dial.
3. Use
to highlight the phone number you want to
set with a Speed Dial, then press
.
6. Press
4. Press Right Soft Key
8. Press Left Soft Key
Done to continue editing the
Contact entry, or Press
to return to the Main
Menu Screen.
5. Press
Options.
Set Speed Dial.
6. Enter a Speed Dial digit.
Use the Keypad and press
, or Use
highlight the Speed Dial digit and press
to select OK.
7. Follow the Voice Dial prompts.
Contacts in Your Phone’s Memory
1. Press Right Soft Key Contacts and use
highlight an entry , then press
.
2. Press Left Soft Key
Adding Voice Dial
to
.
7. Press Left Soft Key Done to continue editing the
Contact entry, or Press
to return to the Main
Menu Screen.
25
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 26
Through Contacts
1. From Main Menu Screen, press Right Soft Key
Contacts. Your Contacts display alphabetically.
Editing Contacts Entries
Adding Another Phone Number
From the Main Menu Screen
2. Use
Contacts in Your Phone’s Memory
1. From Main Menu Screen, enter the phone number
you want to save (up to 48 digits).
2. Press Left Soft Key
3. Press Left Soft Key
Save.
3. Use
to highlight a Label and press
.
Home / Home2 / Office / Office2 / Mobile / Mobile2
/ Pager / Fax / Fax2 / None
4. Use
to highlight Existing and press
5. Use
to highlight the existing Contact entry
and press
.
A confirmation message is displayed.
to highlight the Contact entry you want
to edit, then press
.
4. Use
.
Edit.
to highlight Add Number, then press
5. Enter the number and press
.
6. Use
to highlight a Label, then press
A confirmation message is displayed.
.
Default Numbers
The phone number saved when a Contact is created
is the Default Number. If more than one number is
saved in a Contact entry, another number can be
saved as the Default Number.
Note
The Default Number cannot be deleted by itself. The entire
Contact entry can be deleted or another number can be set
as the Default Number allowing you to delete the original
saved number and keep the Contact entry.
26
.
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 27
Changing the Default Number
1. From Main Menu Screen, press Right Soft Key
Contacts. Your Contacts display alphabetically.
2. Use
to highlight the Contact entry you want to
edit, then press
to highlight the phone number and press
.
5. Edit the phone number as necessary and press
.
.
Edit.
to highlight the phone number you want to
set as the Default Number and press Right Soft Key
Options.
Editing Stored Names
1. From Main Menu Screen, press Right Soft Key
Contacts. Your Contacts display alphabetically.
2. Use
to highlight the Contact entry you want to
edit, then press
.
5. Press
Set as Default #.
A confirmation message is displayed.
3. Press Left Soft Key
Editing Stored Phone Numbers
4. Use
1. From Main Menu Screen, press Right Soft Key
Contacts. Your Contacts display alphabetically.
5. Edit the name as necessary and press
2. Use
to highlight the Contact entry you want to
edit, then press
3. Press Left Soft Key
.
Edit.
Edit.
to highlight the name and press
.
Contacts in Your Phone’s Memory
3. Press Left Soft Key
4. Use
4. Use
.
Editing Customized Options
Edit any of the Contacts options in the same manner
as when the Contact is created.
1. From Main Menu Screen, press Right Soft Key
Contacts. Your Contacts display alphabetically.
27
UX3300_Eng.qxd
10/9/06
2. Use
2:58 PM
3. Press Left Soft Key
Contacts in Your Phone’s Memory
28
Deleting a Contact Entry
to highlight the Contact entry you want
to edit, then press
4. Use
Page 28
.
Edit.
to highlight the information you want to
customize and press
.
5. Edit the information as necessary and press
.
Deleting
1.
Press Right Soft Key
Contacts.
2.
Use
to highlight the Contact entry to be
deleted, then press
.
3.
Press Right Soft Key
4.
Press
Erase Contact.
5.
Press
Erase.
Options.
A confirmation message is displayed.
Deleting a Phone Number from a Contact
1.
Press Right Soft Key
2.
Use
press
Contacts.
to highlight the Contact entry, then
.
3.
Press Left Soft Key
4.
Use
deleted.
Additional Ways to Delete a Contact
Once you accessed your Contacts, pressing Right Soft
Key
Options at any point for the option to erase the
entry.
Edit.
to highlight the phone number to be
5.
Press Right Soft Key
6.
Press
Options.
7.
Press
Erase.
A confirmation message is displayed.
Deleting a Speed Dial
1.
Press Right Soft Key
2.
Use
Erase Number.
Contacts.
to highlight the Contact entry, then press
.
3.
Use
to highlight the Speed Dial number.
UX3300_Eng.qxd
10/9/06
2:58 PM
Press Left Soft Key
Edit.
5.
Press Right Soft Key
6.
Press
7.
Press
Remove.
A confirmation message is displayed.
Options.
Remove Speed Dial.
Phone Numbers With Pauses
When you call automated systems such as voice mail
or credit billing numbers, you often have to enter a
series of numbers. Instead of entering these numbers
by hand, you can store the numbers in your Contacts
separated by special pause characters (P, T). There
are two different types of pauses you can use when
storing a number:
Deleting a Voice Dial
1.
Press Right Soft Key
2.
Use
Contacts.
Hard Pause (P)
to highlight the Contact entry, then press
The phone stops dialing until you press Left Soft Key
Release to advance to the next number.
to highlight the Voice Dial entry.
2-sec Pause (T)
.
3.
Use
4.
Press Left Soft Key
5.
Press
Edit.
to highlight the number, then press
The phone waits 2 seconds before sending the next
string of digits.
Contacts in Your Phone’s Memory
4.
Page 29
.
6.
Press Right Soft Key
Options.
7.
Press
8.
Press
Erase.
A confirmation message is displayed.
Remove Voice Dial.
Storing a Number With Pauses
1. Press Left Soft Key
Menu.
2. Press
Contacts.
3. Press
New Number.
29
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 30
4. Enter the number.
5. Press Right Soft Key
6. Press
Pause.
6. Use
to select pause type and press
Hard Pause / 2-sec Pause
.
Contacts in Your Phone’s Memory
7. Enter additional number(s) (e.g., pin number or
credit card number) and press
.
8. Use
to select a Label and press
.
9. Enter a name (up to 22 characters).
A confirmation message is displayed.
Adding a Pause to an Existing Number
1. Press Right Soft Key
Contacts.
2. Use
to highlight the Contact entry to edit,
then press
.
3. Press Left Soft Key
Edit.
4. Use
to highlight the number then press
two times.
5. Press Right Soft Key
30
Pause.
Hard Pause or
2-sec Pause.
7. Enter additional number(s) and press
.
8. Use
to select the label type and press
A confirmation message is displayed.
.
Searching Your Phone’s Memory
The UX3300 phone is able to perform a dynamic
search of the contents in your phone’s memory. A
dynamic search compares entered letters or numbers
against the entries in your Contacts. A matching list is
displayed in descending order. You can then select a
number from the list to call or edit. There are several
ways to search:
●
Scrolling Alphabetically
●
Searching by Letter
●
Searching by Options
- Find Name
- Find Number
- Find Speed Dial
- Find Group
- Find E-mail
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 31
Scrolling Through Your Contacts
1. Press Right Soft Key
Contacts.
Contacts list is displayed alphabetically.
2. Use
to scroll through the list.
Find Speed Dial - Enter the speed dial
number(s) to search.
Find Group - Use
to highlight the group
to search for and press
.
1. Press Right Soft Key
Contacts.
Contacts list is displayed alphabetically.
4. A list of matches is displayed.
Use
to highlight a matched entry.
2. Press (or press repeatedly) the key on the keypad
that corresponds with the search letter.
5. Press
to see more information or press
to place a call.
Searching Options
1. Press Right Soft Key
Contacts.
2. Press Right Soft Key
Options.
Contacts in Your Phone’s Memory
Find E-mail - Enter the e-mail address to
search.
Searching by Letter
3. Select the search criteria using
(or press
the corresponding number on the keypad):
Find Name - Enter the character(s) to
search for (such as the first letters of the
name).
Find Number - Enter the number(s) to
search.
31
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 32
Making a Call From Your Phone’s
Memory
From Recent Calls
Once you have stored phone numbers into your
Contacts, you can place calls to those numbers
quickly and easily.
2. Press
●
●
●
Pressing
after you’ve searched for a phone
number in Contacts or Recent Calls.
Using Speed Dialing
Using Voice Dialing
From Contacts
WELCOME
to select the Contact entry and press
4. Press
32
Contacts.
.
3. Use
3. Use
to select the phone number.
to place the call.
Menu.
Recent Calls.
to select the type of recent call and press
.
Dialed Calls / Received Calls / Missed Calls /
Erase Calls / Call Timer
4. Use
5. Press
1. Press Right Soft Key
2. Use
1. Press Left Soft Key
to highlight the phone number.
to place the call.
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 33
Using Phone Menus
Menu Access
Note
Press Left Soft Key Menu to have access to six
phone menus. There are two methods to access
menus and submenus:
Press
to go back one step while accessing the menu
or selecting a setting.
G
Use the navigation key to highlight and select, or
Press
G
Press the number key that corresponds to the
menu or submenu.
Note
to cancel without saving.
For example:
2. Press the appropriate number key corresponding
to the menu item you want to select.
The sub-menu list will be displayed.
Using Phone Menus
1. Press Left Soft Key Menu.
Six menus items are displayed.
Use
to scroll through the list of menus.
3. Press the appropriate number key corresponding
to the sub-menu you want to access.
4. Use
press
to highlight your preferred setting and
to select it.
33
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 34
Contacts
Contacts
1. List Contacts
The Contacts Menu allows you to store names,
phone numbers and other information in your phone’s
memory. When you access your Contacts, the
number in parenthesis represents the number of
entries you have stored (up to 300).
Allows you to view your Contacts list.
Access and Options
1. Press Left Soft Key
2. Press
Contacts
1. List Contacts
2. New Number
3. New E-mail
4. Groups
5. Speed Dials
6. Voice Dials
7. My Contact Info
,
,
.
2. Options from here:
●
Press
to scroll through your Contacts
alphabetically.
●
Press Right Soft Key
the following:
Menu.
Contacts.
3. Select a sub-menu.
34
1. Press
●
Options to select one of
Send Message / Find Name / Find Number / Find
Speed Dial / Find Group / Find E-mail / Erase
Press Left Soft Key
New to store a New
Number or New E-mail.
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 35
2. New Number
1. Press
Allows you to add a new number.
2. Enter the e-mail address and press
,
,
.
.
Note
3. Enter the name and press
Using this sub-menu, the number is saved as a new Contact.
To save the number into an existing Contact, edit the
Contact entry.
4. Continue saving the entry as necessary.
1. Press
,
,
3. Select the Label you want and press
4. Groups
Allows you to view your grouped Contacts, add a
new group, change the name of a group, or delete a
whole group.
.
2. Enter the number and press
.
.
.
3. New E-mail
Allows you to save a new e-mail address.
Note
Using this sub-menu, the e-mail is saved as a new Contact.
To save the e-mail into an existing Contact, edit the Contact
entry.
,
,
.
2. Options from here:
●
Use
to highlight a group to view and press
.
●
Press Left Soft Key
list.
●
Use
Key
Contacts
4. Enter the name and press
.
5. Continue saving the entry as necessary.
1. Press
Add to add a new group to the
to highlight a group and press Right Soft
Options to change the name of the group
or delete the group.
Edit Group / Erase Group
35
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 36
Contacts
5. Speed Dials
●
Allows you to view your list of Speed Dials or
designate Speed Dial for numbers entered in your
Contacts.
1. Press
,
,
Use
to highlight a Voice Dial and press Right
Soft Key
Options to choose one of the
following:
Play / Re-record / Erase / Erase All
.
Note
2. Use
to highlight the Speed Dial position, or
enter the Speed Dial digit and press
.
3. Use
to highlight the Contact and press
.
4. Use
to highlight the number and press
A confirmation message is displayed.
.
Contacts
Allows you to view the list of numbers programmed
with voice dialing or add a Voice Dial command to a
number stored in your Contacts.
,
,
.
2. Options from here:
●
36
7. My Contact Info
Allows you to view your contact information.
6. Voice Dials
1. Press
Recordings should be made in a normal use position
(speaker by your ear and microphone near your mouth)
while using a clear voice. Hands-free car kits or headsets
should be used if the phone is primarily used with them.
Press Left Soft Key New to record a new Voice Dial
command. Follow the phone’s prompts.
1. Press
,
,
.
2. Use
to select the feature you want to edit,
then press
.
3. Edit the information as necessary.
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 37
Recent Calls
4. Erase Calls
5. Call Timer
Recent Calls
The Recent Calls Menu is a list of the last phone numbers or
Contact entries for calls you placed, accepted, or missed. It is
continually updated as new numbers are added to the beginning
of the list and the oldest entries are removed from the bottom of
the list.
Note
To view a quick list of all your recent calls, press
the Main Menu.
indicates a dialed call.
●
indicates a received call.
●
indicates a missed call.
Allows you to view the list of outgoing calls; up to 30
entries.
Access and Options
1. Press Left Soft Key
2. Press
1. Press
,
,
.
2. Use
to highlight an entry, then
●
Press
to view the entry.
●
Press
to place a call to the number.
●
Press Right Soft Key
Options to select:
Save(Contact Info) / Send Msg / Prepend / Erase /
Erase All
Menu.
Recent Calls.
3. Select a sub-menu.
1. Dialed Calls
Recent Calls
●
from
1. Dialed Calls
2. Received Calls
3. Missed Calls
37
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 38
Recent Calls
2. Received Calls
●
Allows you to view the list of incoming calls; up to 30
entries.
1. Press
,
,
2. Use
to highlight an entry, then
Press Right Soft Key
Options to select:
Save(Contact Info) / Send Msg / Prepend / Erase /
Erase All
.
●
Press
●
Press
●
Press Right Soft Key
Options to select:
Save(Contact Info) / Send Msg / Prepend / Erase /
Erase All
to view the entry.
4. Erase Calls
Allows you to erase selected call list(s).
1. Press
,
2. Use
.
to highlight the list of calls to erase and
press
.
Recent Calls
Dialed Calls / Received Calls / Missed Calls / All
Calls
3. Missed Calls
3. Press
Allows you to view the list of missed calls; up to 30
entries.
5. Call Timer
1. Press
,
Allows you to view the duration of selected calls.
2. Use
to highlight an entry, then
●
●
38
,
to place a call to the number.
Press
Press
,
.
to view the entry.
to place a call to the number.
Erase or
,
Cancel.
1. Press
,
.
2. Use
to highlight a call list and press
.
Last Call / Home Calls / Roam Calls / All Calls
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 39
Messages
Messages
Access and Options
1. Press Left Soft Key
2. Press
Menu.
Messages.
3. Select a sub-menu.
1. Voice Mail
2. New Message
3. Inbox
4. Outbox
6. Msg Settings
7. Erase All
Make a call to the callback number by pressing
during a message check.
●
Read and edit messages saved in the outbox
during transmission and send them.
The phone can store up to 115 messages (for example,
50 inbox text messages, 50 outbox text messages, 15
saved text messages). The UX3300 supports up to 160
characters per message including header information.
The information stored in the message is determined by
phone mode and service capability. Other limits to
available characters per message may exist. Please
check with your service provider for system features
and capabilities.
New Message Alert
There are three ways your phone alerts you to new messages.
Messages
5. Saved
●
1. The phone displays the message on the screen.
2. One of eight ring types is heard, if selected.
Text messages, pages, and the voice mail box become
available as soon as the phone is powered on.
●
Check types of messages by pressing the message key
.
3. The message icon (
) is displayed on the
display screen. In the case of an urgent message,
the icon will flash and Urgent message is
displayed.
39
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 40
Messages
Note
2. New Message
If you receive the same message twice, your phone deletes
the older one and the new one is stored as a Duplicate.
Allows you to send text messages, EMS messages,
pages and e-mail transmissions. Each message has a
destination (Address 1) and information (Message).
These are dependent upon the type of message you
want to send.
1. Voice Mail
Allows you to view new voice messages recorded in
the voice mail box. When you have a new voice
message, your phone will alert you.
The basics of sending a Text Message
1. Press
Checking Your Voice Mail Box
1. Press
,
,
.
Messages
2. Options from here:
●
Press
●
Press Left Soft Key
Clear to delete information,
and then select Clear Count.
to listen to the message(s).
,
,
.
2. Enter the phone number of the recipient or the email address for an e-mail message.
3. Press
.
4. Press
to access the message screen.
5. Type your message (text or e-mail) then press
.
6. Press Left Soft Key
Send.
A confirmation message is displayed.
40
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 41
Customizing the Text Message using options
Using contacts to send a Text Message
1. Create a new message.
You can designate an entry saved in your Contacts as
Address 1 instead of manually entering the
destination.
2. Press Right Soft Key
Options.
3. Select the option(s) to customize.
Send
Sends the message.
Priority
Gives priority to the message.
Normal / Urgent
Text-Callback # Inserts a pre-programmed callback
number with your message.
On / Off / Edit
,
,
2. Press Left Soft Key
.
Contacts.
3. Select Contacts / Recent Calls / Recent
Addresses then press
.
4. Use
to highlight the Contact entry containing
the destination and press
.
5. Use
to highlight the SMS phone number or
e-mail address and press
.
Messages
Delivery Notice Informs you that the message has been
successfully delivered to the recipient.
Enhanced / On
1. Press
Save Message Saves the message into the saved folder.
Note
4. Complete and send the message.
The Address 1 feature allows multi-sending of up to 10
addresses.
6. Complete the message as necessary.
41
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 42
Messages
Text Options
3. Inbox
While you are composing the text of a message you
can insert customized text.
The phone alerts you in 3 ways when you receive a
new message:
1. Create a new message.
2. Use
to highlight Message then press
3. Press Right Soft Key
By displaying a message notification on the
screen.
●
By sounding a beep, vibrating or sound, if set.
●
By blinking
message).
.
Options.
4. Select the option(s) to customize.
(Only when you get an urgent
Messages
Insert Quick-Text Inserts predefined phrases.
Yes / No / Call me / Need Directions /
Where Are You? / Will Call Later / Busy /
On My Way / Will Arrive 15 Minutes /
Thank You / Love You
Received text messages, page messages, and e-mail
lists may be searched and the contents viewed.
Received messages are displayed from newest to
oldest.
Save Quick-Text Allows you to define phrases to insert as
Insert Quick Text.
Out of Memory Warning
Insert Signature Inserts a predefined signature.
5. Complete and send or save the message.
42
●
If the memory is full, no more messages can be
received until enough memory space becomes
available. The message NOT ENOUGH MEMORY is
displayed and new messages are not accepted.
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 43
Viewing Your Inbox
Up to 50 received messages can be stored in the
Inbox.
1. Press
,
,
●
Left Soft Key
●
Right Soft Key
Erase
.
Reply.
Options.
Deletes the selected message from the Inbox.
Lock/Unlock Locks a message so that it is not erased if the
Erase Inbox or Erase All feature are used.
.
Options from here:
Save Quick-Text Saves the message into the Quick-Text list.
Save Message Saves Inbox message into the Saved
Folder.
Lock/Unlock
Locks or unlocks the selected message.
Locked messages can not be deleted by
the Erase Inbox and Erase All functions.
Messages
2. Press
Save Address Stores the callback number, e-mail
address, and numbers in user data
included in the received message into
your Contacts.
Reply w Copy Replies to the SMS with the original
message attached.
Forward
Forwards a received message to others
destination address(es).
Erase
Deletes the selected message from the
Inbox.
43
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 44
Messages
4. Outbox
Up to 50 sent messages can be stored in the Outbox.
View lists and contents of sent messages and verify
whether the transmission was successful or not.
1. Press
,
,
●
Press Left Soft Key
●
Press Right Soft Key
Erase
Save Quick-Text Saves the message into the Quick-Text
list.
.
Resend.
Options.
Deletes the selected message from the
Outbox.
Messages
Lock/Unlock Locks a message so that it is not erased if the
Erase Outbox or Erase All feature is used.
2. Press
.
Options from here:
44
Save Address Stores the callback number, e-mail
address, and numbers in user data
included in the received message into
your Contacts.
Send to
Edits the recipient's address.
Erase
Deletes the selected message from the
Outbox.
Save Message Saves Outbox message into the Saved
Folder.
Lock/Unlock
Locks or unlocks the selected message.
Locked messages can not be deleted by
the Erase Outbox and Erase All functions.
Message Info Shows the message type priority and
status.
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 45
5. Saved
6. Msg Settings
Displays saved messages and draft messages.
Allows you to configure ten settings for received
messages.
1. Press
,
,
2. Press Left Soft Key
3. Press Right Soft Key
.
Resume.
Options.
Erase
Deletes the selected message.
Lock/Unlock
Locks a message so that it is not erased if
the Erase Saved or Erase All feature is
used.
1. Press
2. Use
,
,
.
to highlight one of the settings and press
to select it.
Auto Save
Auto Save / Prompt / Do Not Save
Auto Delete
On / Off
Text-Callback #
Signature
None / Custom
Auto View
On / Off
Entry Mode
T9Word / Abc / 123
Quick-Text
Yes/ No/ Call me/ Need Directions/
Where Are You?/ Will Call Later/ Busy/
On My Way/ Will Arrive 15 Minutes/
Thank You/ Love You
Auto Play
On / Off
Messages
Voice Mailbox #
45
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 46
Messages
Message Settings Sub-Menu Descriptions
6.5 Signature
6.1 Auto Save
Allows you make/edit a signature to automatically
send with your messages.
With this feature on, messages are automatically
saved in the Outbox when transmitted.
6.6 Auto View
6.2 Auto Delete
Allows you to directly display the content when
receiving a message.
With this feature on, read messages (except locked
messages) are automatically deleted when you
exceed the storage limit.
6.7 Entry Mode
Allows you to select the default input method
including T9Word, Abc, 123.
6.3 Text-Callback #
Messages
Allows you to manually enter the callback number.
6.8 Quick-Text
6.4 Voice Mailbox #
Allows you to display, edit, and add text phrases.
These text strings allow you to reduce manual text
input into messages.
Allows you to manually enter the access number for
Voice Mail Service. This number should only be used
when VMS access number is not provided from the
network.
46
6.9 Auto Play
Allows the message to be scrolled automatically
when you read it.
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 47
7. Erase All
Allows you to erase all text messages stored in your
Inbox, Outbox, or Saved Msgs Folders. You can also
erase all messages at the same time.
1. Press
,
,
.
Press
Inbox to erase all messages stored in
the Inbox.
●
Press
Outbox to erase all messages stored
in the Outbox.
●
Press
Saved to erase all messages stored in
the Saved Items folder.
●
Press
All to erase all messages stored in the
Inbox, Outbox, and Saved Items folder.
Messages
●
2. Press
Erase All.
Confirmation message is displayed.
47
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 48
Tools
Tools
1. Schedule
Your phone tools include a Schedule, Alarm Clock,
Voice Memo, My Shortcut, Notepad, EZ Tip Calc,
Calculator, and World Clock.
Allows you to conveniently keep and access your
agenda(s). Simply store your appointments and your
phone will alert you with a reminder of your appointment.
Access and Options
1. Press
1. Press Left Soft Key
2. Press
Menu.
2. Use
3. Select a sub-menu.
1. Schedule
3. Voice Memo
Tools
●
●
8. World Clock
Add.
4. Enter your schedule information including:
5. Notepad
7. Calculator
.
to highlight the scheduled day.
3. Press Left Soft Key
4. My Shortcut
6. EZ Tip Calc
,
Moves cursor to the left.
Moves cursor to the right.
Moves to the previous week.
Moves to the next week.
Tools.
2. Alarm Clock
,
●
●
● Time
Date
Title/Information ● Recurring event
When to ring the alarm reminder
Which ring alarm to sound
5. Press Left Soft Key
Save.
Note
Scheduler will not alert you during a call or during SMS
transmitting. It will sound the reminder after you exit a call.
48
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 49
2. Alarm Clock
8. Use
Allows you to set one of four alarms. The current time is
displayed at the top of the screen when you select an
alarm to set. At the alarm time, Alarm 1 (or 2 or 3, as
applicable) will be displayed on the LCD screen and the
alarm will sound.
1. Press
,
,
Alarm 2 /
9. Press Left Soft Key
Alarm 3 /
Quick
1. Press
to highlight the alarm time then press
4. Set the time for alarm and press
.
to highlight Once (recurring setting) and press
.
6. Press
to select one of the following and press
.
Once / Daily / Mon-Fri / Weekends
7. Use
to highlight Ring (ring type setting) and press
.
,
,
2. Press Left Soft Key
voice memo.
.
New to record a new
3. Select the Voice Memo you want then press Right
Soft Key Options.
Edit Title
Edits the title of the Voice Memo.
Memory Info Shows the memory info used and left.
Set As
Contacts / Caller ID / No Caller ID /
Restrict
Erase
Delete the selected Voice Memo.
Erase All
Delete all of the Voice Memos.
Tools
5. Use
Save.
Allows you to listen to, add, and erase short verbal
reminders.
Alarm
3. Use
.
3. Voice Memo
.
2. Select the alarm you want to edit.
Alarm 1 /
to select one of the available alarm ring types
and press
.
49
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 50
Tools
4. My Shortcut
6. EZ Tip Calc
Allows you to set a shortcut to Contacts, Recent Calls,
Tools, or Settings using the Up Navigation key.
Allows you to quickly and easily calculate the amounts
for a bill with the amount of the bill, the amount of the
tip and the number of people as variables.
1. Press
,
,
.
An explanation message is displayed.
2. Press
,
.
7. Calculator
Allows you to calculate simple mathematical
computations. You can enter numbers up to the
second decimal place.
5. Notepad
Allows you to read, add, edit, and erase notes to
yourself.
Tools
,
,
2. Press Left Soft Key
3. Press Right Soft Key
●
,
to continue.
3. Select the shortcut.
1. Press
1. Press
Erase / Erase All
.
Add to write a new note.
1. Press
,
,
.
Note
Calculations can be made with up to 29 characters at one
time (e.g., 63+78-21 would be 8 characters).
Options.
8. World Clock
Allows you to determine the current time in another
time zone or country.
1.
50
Press
,
,
.
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 51
Settings
Settings
1. Sounds
The Setup menu has options to customize your phone.
Options to customize the phone’s sounds.
1.1 Ringers
Access and Options
1. Press Left Soft Key
2. Press
Settings.
3. Select a sub-menu.
1. Sounds
Menu.
Assign ring tones for incoming calls.
1. Press
,
,
,
.
2. Select Caller ID / No Caller ID / Restrict.
3. Use
to select a ringer then press
3. System
1.2 Key Tone
4. Security
Allows you to select the Key Tone type.
5. Call Setup
1. Press
6. Data Settings
7. Voice Services
8. Location
,
,
,
to save
.
2. Select Beep / English / Spanish then press
Beep
Settings
2. Display
the sound.
.
Sends out a beep sound, when you press
the keys.
English Sends out a voice (English), when you
press the keys.
Spanish Sends out a voice (Spanish), when you
press the keys.
51
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 52
Settings
1.3 Volume
1.5 Service Alerts
Allows you to set various volume settings.
Allows you to set any of the four Alert options to either On or
Off.
1. Press
,
,
,
.
1. Press
2. Select Ringer / Earpiece / Key Beep / Speaker
Phone.
3. Adjust the volume of the ringer with
press
to save the setting.
then
n
,
,
,
.
2. Select an alert option.
1. 5. 1 Service Change
Alerts you when service changes. When you enter a
service area, the phone displays Entering Service
Area message. When you leave a service area, the
phone displays Leaving Service Area message.
1.4 Message Alerts
Settings
Allows you to select the alert type for a new message.
Alert types are Voice Mail, Text Message, E-mail,
Page, and 2-Min Reminder.
1. Press
,
,
,
.
2. Select Voice Mail / Text Message / E-mail / Page /
2- Min Reminder.
1. 5. 2. Minute Beep
Alerts you 10 seconds before the end of every minute
during a call.
1. 5. 3. Call Connect
Alerts you when the call is connected.
1. 5. 4. Back To Top
Alerts you when you scroll through the end of a menu list.
3. Select an option and press
4. Set On/ Off with
52
.
then press
.
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 53
1.6 Power On/Off Tone
Note
Allows you to set the phone to sound a tone when the
phone is powered on, powered off, or both.
Dual-Tone Multi Frequency (DTMF) Signaling by the
simultaneous transmission of two tones, one from a group of
low frequencies and another from a group of high
frequencies. Each group of frequencies consists of four
frequencies. Setting the Key Beep length to Long will extend
the DTMF tone.
1. Press
,
.
2. Set your selection with
,
,
.
u\
3. Set On / Off with then press
.
1.7 DTMF Length
Allows you to set the Key Tone length and touch tone
playback speed.
,
,
,
.
2. Select either of the following then press
.
Settings
1. Press
Normal Sends out a tone for a fixed period of time
even if you keep the key pressed.
Long
Sends out a continuous tone for as long
as you keep the key pressed.
53
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 54
Settings
2. Display
2. 2. 1. Main LCD
Options to customize the phone’s display screen.
Timer Options
● 7 seconds
● 15 seconds
● 30 seconds
● Always On: means that the backlight is always on.
● Always Off: means that the backlight is never on.
2.1 Banner
Allows you to enter a string of up to 16 characters
which display on the LCD screen.
1. Press
,
,
,
.
2. Enter you banner text then press
.
Brightness Sets the brightness level of the backlight.
Settings
2.2 Backlight
●
Allows you to set the duration for illuminating the
backlight. Main LCD, and Key Light Timer are set
separately.
2. 2. 2. Key Light Timer
1. Press
,
,
,
●
.
Key Light Timer
3. Choose a setting and press
Timer /
●
.
2. Choose a Backlight sub-menu and press
Main LCD /
●
.
Brightness
If an amount of time is set for the timer option, the time
starts after the last key was pressed.
54
●
0% / 25% / 50% / 75% / 100%
7 seconds
15 seconds
Always On: means that the backlight is always on.
Always Off: means that the backlight is never on.
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 55
2.3 Screens
2.5 Clocks
Allows you to choose the kind of background to be
displayed on the phone.
Allows you to choose the kind of clock to be displayed
on the LCD screen.
1. Press
1. Press
,
,
,
.
2. Select Wallpaper / Power On / Power Off then press
.
3. Select from different screens then press
4. Left Soft Key
Save.
,
.
.
Allows you to choose the color of the background
screen.
,
,
2. Select Icon or List and press
.
1. Press
,
,
,
.
2. Select Default / Green / Violet / Orange then press
.
Settings
Allows you to view the Menu as an Icon or List
display.
,
,
2.6 Theme Colors
2.4 Menu Style
1. Press
,
2. Select Normal / Analog / Digital then press Left
Soft Key Save.
.
2.7 Contrast
Allows you to set the level of contrast for your LCD
screen.
1. Press
2. Use
,
,
,
.
to adjust the contrast level.
55
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 56
Settings
2.8 Fonts
2.0 Power Saver
Allows you to set the size and color of the font.
1. Press
,
,
,
When the phone is in an area without service, it stops
searching for service and enters into Power Saver
Mode.
.
2. 8. 1. Calling Digits
1. Press
1. Select Size / Color.
2. Press
,
2. Use
to choose the desired size or color for
the Calling Digits and then press
●
●
to save.
●
2. 8. 2. Text Editor
●
,
,
.
to select a setting, then press
.
2 min
10 min
30 min
Off
1. Select Size / Color.
Settings
2. Press
to choose the desired size or color for
the Text Editor and then press
to save.
Shows the status of your phone by blinking the light.
1. Press
2.9 Language
,
,
,
2. Set English / Spanish with
56
.
then press
,
,
2. Set On / Off with
Allows you to set the bilingual feature according to
your preference. Choose between English and
Spanish.
1. Press
2.* Status Light
.
,
.
then press
.
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 57
3. System
3.3 Auto NAM
The System menu allows you to designate specific
system network settings.
Allows the phone to automatically switch between
programmed telephone numbers corresponding to the
service provider area.
3.1 Select System
1. Press
Allows you to set up the phone producer’s
management environment. Leave this setting as the
default unless you want to alter system selection as
instructed by your service provider.
2. Select On / Off then press
1. Press
Identifies the channel number of a system that is
served as an SID Number. This information should
only be used for technical support.
,
,
,
.
2. Select Home Only / Automatic then press
.
,
,
.
.
3.4 Serving System
,
,
,
.
Settings
1. Press
3.2 Set NAM
,
Allows you to select the phone’s NAM (Number
Assignment Module) if the phone is registered with
multiple service providers.
1. Press
,
,
,
.
2. Select NAM1 / NAM2 then press
.
57
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 58
Settings
4. Security
4.2 Restrict Calls
The Security menu allows you to secure the phone
electronically.
Allows you to restrict outgoing calls. If you set this
feature to On, you can only place calls to emergency
numbers and phone numbers stored in your Contacts.
You can still receive calls in the restrict mode.
4.1 Lock Phone
Keeps your phone from unauthorized use. Once the
phone is locked, it is in restricted mode until the lock
code is entered. You can receive phone calls and still
make emergency calls. You can modify the lock code
using the New Lock code within the Security menu.
1. Press
,
,
,
.
2. Enter the four-digit lock code.
3. Press
Restrict Calls.
4. Select On / Off then press
.
.
Settings
2. Enter the four-digit lock code.
The lock code is commonly the last 4 digits of your
phone number.
3. Press
58
,
1. Press
Lock Phone.
4. Select an option then press
.
Unlock
The phone is never locked (Lock mode can
be used).
Lock
The phone is always locked.
When locked, you can receive incoming
calls or make only emergency calls.
On Power Up The phone is locked when it is turned on.
4.3 Emergency #s
Allows you to enter 3 emergency numbers You can
call these emergency numbers and 911, even when
the phone is locked or restricted.
1. Press
,
,
.
2. Enter the four-digit lock code.
3. Press
Emergency #s.
4. Select emergency number using
.
5. Enter an emergency phone number then press
.
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 59
4.4 Change Lock
4. Press
, select Revert then press
.
Allows you to enter a new four-digit lock code.
1. Press
,
,
5. Call Setup
.
The Call Setup menu allows you to designate how the
phone handles both incoming and outgoing calls.
2. Enter the four-digit lock code.
3. Press
Change Lock.
4. For confirmation, it will ask you to enter the new
lock code again.
4.5 Erase Contacts
Allows you to erase all of your Contacts at once.
1. Press
,
,
,
,
,
.
2. Select Off / Every 10 seconds / Every 30 seconds /
.
.
5.2 Answer Call
4.6 Reset Default
Allows you to reset your phone to the factory default
settings.
Allows you to determine how to initiate an answered
call.
1. Press
1. Press
,
,
.
2. Enter the four-digit lock code.
3. Press
Settings
Every 60 seconds then press
Erase Contacts.
4. Select Erase all #s then press
Allows you to set the length of time the phone waits
before automatically redialing a number when the
attempted call fails.
1. Press
.
2. Enter the four-digit lock code.
3. Press
5.1 Auto Retry
Reset Default.
,
,
,
.
2. Select Flip open / Any key / SEND only then press
.
59
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 60
Settings
5.3 Auto Answer
5.5 Voice Privacy
Allows you to select the number of rings before the
phone automatically answers a call. This feature is
intended for use with hands free devices, but is an
independent feature of the phone and must be manually
turned on/off when connected or disconnected from the
device.
Allows you to set the voice privacy feature for CDMA
calls as Enhanced or Standard. CDMA offers inherent
voice privacy. Check with your service provider for
availability.
1. Press
,
,
,
,
.
.
5.6 Auto Volume
Settings
Off
●
After 5 sec When you have an incoming call, the
phone automatically responds after 5 sec with the
clamshell either opened or closed.
Provides a better audio experience by enabling the
Auto Volume feature to control the dynamic range and
volume of the sending and receiving voice across
different levels of speaker and environments.
1. Press
5.4 One-Touch Dial
,
,
,
,
,
2. Select On / Off then press
Allows you to initiate a speed dial call by pressing and
holding the speed dial digit. If set to Disable, Speed
Dial numbers designated in your Contacts will not
function.
,
.
2. Select Enable / Disable then press
60
,
.
●
1. Press
,
2. Select Enhanced / Standard then press
.
2. Select an option then press
1. Press
.
.
.
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 61
5.7 TTY Mode
6. Data Settings
Allows you to attach a TTY device enabling you to
communicate with parties also using a TTY device. A
phone with TTY support is able to translate typed
characters to voice. Voice can also be translated into
characters and then displayed on the TTY.
* TTY : Text Telephone. (or Teletypewriter for Deaf).
This menu allows you to use wireless data
communication services. Wireless data
communication services refers to the utilization of
subscriber terminals for access to the internet with
personal computers or laptops at 19.2 Kbps or at a
maximum of 230.4 Kbps. The connection speed
depends on your carrier’s network and other
variables. Contact communication information
specifications must match the network.
1. Press
2. Press
,
,
,
.
.
3. Select TTY Full / TTY + TALK / TTY + HEAR / TTY
Off then press
.
6.1 PC Connection
1. Press
,
,
,
Settings
Allows you to select the data port.
.
2. Select USBC/RS-232C / Closed then press
.
Note
When using the 1X HSPD data service via an RS-232C data
cable, the port speed is set to 115,200 (230,400 is not
supported). When using the 1X HSPD data service via a
USB data cable, you may get better port speed if the port
speed is set to 230,400 rather than 115,200.
61
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 62
Settings
7. Voice Services
8. Location
The Voice Services menu provides access to the
voice services available with your phone.
Menu for GPS (Global Positioning System: Satellite
assisted location information system) mode.
7.1 Voice Dial Prompt
1. Press
Allows you to set the command to enable voice
dialing.
2. Select Location On / E911 Only then press
1. Press
,
,
,
.
2. Select Key press / Flip open / Disable then press
.
Settings
7.2 Train Words
1. Press
,
,
,
2. Select Yes / No then press
.
.
2. Select Train / Un-train then press
62
.
,
,
.
.
Note
GPS satellite signals are not always transmitted, especially
under bad atmospheric and environmental conditions,
indoors or otherwise.
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 63
Phone Info
Phone Info
1. My Phone Number
The Phone Info Menu provides you with specific
information pertaining to your phone model.
Allows you to view your phone number.
1. Press
,
,
.
Access and Options
1. Press Left Soft Key
2. Press
Menu.
Phone Info.
3. Select a sub-menu.
1. My Phone Number
2. S/W Version
Allows you to view the software, PRL.
* PRL : Preferred Roaming List.
1. Press
,
,
.
2. S/W Version
3. Icon Glossary
4. Shortcut Help
Allows you to view all the icons and their meanings.
1. Press
,
,
.
Phone Info
3. Icon Glossary
4. Shortcut Help
Allows you to view condensed information about using
the phone.
1. Press
,
,
.
63
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 64
Safety
TIA Safety Information
The following is the complete TIA Safety Information
for wireless handheld phones.
Exposure to Radio Frequency Signal
Safety
Your wireless handheld portable phone is a low power
radio transmitter and receiver. When ON, it receives
and sends out Radio Frequency (RF) signals.
The design of your phone complies with the FCC
guidelines (and those standards).
In August, 1996, the Federal Communications
Commissions (FCC) adopted RF exposure guidelines
with safety levels for handheld wireless phones.
Those guidelines are consistent with the safety
standards previously set by both U.S. and
international standards bodies:
Antenna Care
Use only the supplied or an approved replacement
antenna. Unauthorized antennas, modifications, or
attachments could damage the phone and may
violate FCC regulations.
ANSI C95.1 (1992) *
Phone Operation
NCRP Report 86 (1986)
NORMAL POSITION: Hold the phone as you would
any other telephone with the antenna pointed up
and over your shoulder.
ICNIRP (1996)
* American National Standards Institute; National
Council on Radiation Protection and Measurements;
International Commission on Non-Ionizing Radiation
Protection.
64
Those standards were based on comprehensive and
periodic evaluations of the relevant scientific
literature. For example, over 120 scientists, engineers,
and physicians from universities, government health
agencies, and industry reviewed the available body of
research to develop the ANSI Standard (C95.1).
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 65
Tips on Efficient Operation
For your phone to operate most efficiently:
Don’t touch the antenna unnecessarily when the
phone is in use. Contact with the antenna affects call
quality and may cause the phone to operate at a
higher power level than otherwise needed.
Driving
Check the laws and regulations on the use of wireless
phones in the areas where you drive and always obey
them. Also, if using your phone while driving, please
observe the following:
Give full attention to driving -- driving safely is
your first responsibility;
G
Use hands-free operation, if available;
G
Pull off the road and park before making or
answering a call if driving conditions or the law
require it.
Electronic Devices
Most modern electronic equipment is shielded from
RF signals. However, certain electronic equipment
Pacemakers
The Health Industry Manufacturers Association
recommends that a minimum separation of six (6)
inches be maintained between a handheld wireless
phone and a pacemaker to avoid potential
interference with the pacemaker. These
recommendations are consistent with the
independent research by and recommendations of
Wireless Technology Research.
Persons with pacemakers:
G
Should ALWAYS keep the phone more than six (6)
inches from their pacemaker when the phone is
turned ON;
G
Should not carry the phone in a breast pocket;
G
Should use the ear opposite the pacemaker to
minimize the potential for interference;
G
Should turn the phone OFF immediately if there is
any reason to suspect that interference is taking
place.
Safety
G
may not be shielded against the RF signals from your
wireless phone.
65
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 66
Safety
Hearing Aids
Vehicles
Some digital wireless phones may interfere with some
hearing aids. In the event of such interference, you
may want to consult your service provider (or call the
customer service line to discuss alternatives).
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle. You should
also consult the manufacturer of any equipment that
has been added to your vehicle.
Other Medical Devices
If you use any other personal medical device, consult
the manufacturer of your device to determine if it is
adequately shielded from external RF energy. Your
physician may be able to assist you in obtaining this
information.
Posted Facilities
Turn your phone OFF in any facility where posted
notices so require.
Aircraft
Safety
66
Health Care Facilities
Turn your phone OFF in health care facilities when
any regulations posted in these areas instruct you to
do so. Hospitals or health care facilities may use
equipment that could be sensitive to external RF
energy.
FCC regulations prohibit using your phone while in
the air. Switch OFF your phone before boarding an
aircraft.
Blasting Areas
To avoid interfering with blasting operations, turn
your phone OFF when in a “blasting area” or in areas
posted: “Turn off two-way radio”. Obey all signs and
instructions.
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 67
Potentially Explosive Atmosphere
Safety Information
Turn your phone OFF when in any area with a
potentially explosive atmosphere and obey all signs
and instructions. Sparks in such areas could cause an
explosion or fire resulting in bodily injury or even
death.
Please read and observe the following information for
safe and proper use of your phone and to prevent
damage. Also, keep the user guide in an accessible
place at all times after reading it.
For Vehicles Equipped with an Air Bag
An air bag inflates with great force. DO NOT place
objects, including either installed or portable wireless
equipment, in the area over the air bag or in the air
bag deployment area. If in-vehicle wireless equipment
is improperly installed and the air bag inflates, serious
injury could result.
Caution! Violation of the instructions may cause
minor or serious damage to the product.
Charger and Adapter Safety
G
The charger and adapter are intended for indoor
use only.
G
Insert the battery pack charger vertically into the
wall power socket.
G
Use the correct adapter for your phone when
using the battery pack charger abroad.
G
Only use the approved battery charger. Otherwise,
you may cause serious damage to your phone.
Safety
Areas with a potentially explosive atmosphere are
often, but not always marked clearly. Potential areas
may include: fueling areas (such as gasoline stations);
below deck on boats; fuel or chemical transfer or
storage facilities; vehicles using liquefied petroleum
gas (such as propane or butane); areas where the air
contains chemicals or particles (such as grain, dust,
or metal powders); and any other area where you
would normally be advised to turn off your vehicle
engine.
Battery Information and Care
G
Please dispose of your battery properly or take it
to your local wireless carrier for recycling.
G
The battery doesn't need to be empty before
recharging.
67
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 68
Safety
G
Use only LG-approved chargers specific to your
phone model since they are designed to maximize
battery life.
G
Do not disassemble or short-circuit the battery.
G
Keep the battery’s metal contacts clean.
G
Replace the battery when it no longer provides
acceptable performance. The battery can be
recharged several hundred times before replacement.
G
Recharge the battery after long periods of non-use
to maximize battery life.
Safety
G
Battery life will vary due to usage patterns and
environmental conditions.
G
Use of extended backlighting, Browser, and data
connectivity kits affect battery life and
talk/standby times.
G
The self-protection function of the battery cuts the
power of the phone when its operation is in an
abnormal state. In this case, remove the battery
from the phone, reinstall it, and turn the phone on.
G
Unplug the power cord prior to cleaning your
phone, and clean the power plug pin when it’s dirty.
G
When using the power plug, ensure that it’s firmly
connected. If not, it may cause excessive heat or fire.
G
If you put your phone in a pocket or bag without
covering the receptacle of the phone (power plug
pin), metallic articles (such as a coin, paperclip or
pen) may short-circuit the phone. Always cover the
receptacle when not in use.
G
Don’t short-circuit the battery. Metallic articles
such as a coin, paperclip or pen in your pocket or
bag may short-circuit the + and – terminals of the
battery (metal strips on the battery) upon moving.
Short-circuit of the terminal may damage the
battery and cause an explosion.
G
Do not disassemble or crush the battery. It may
cause a fire.
General Notice
G
Using a damaged battery or placing a battery in
your mouth may cause serious injury.
G
Do not place items containing magnetic
components such as a credit card, phone card,
bank book, or subway ticket near your phone. The
Explosion, Shock, and Fire Hazards
G
68
Do not put your phone in a place subject to
excessive dust and keep the minimum required
distance between the power cord and heat sources.
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 69
important phone numbers. (Ring tones, text
messages, voice messages, pictures, and videos
could also be deleted.) The manufacturer is not
liable for damage due to the loss of data.
magnetism of the phone may damage the data
stored in the magnetic strip.
G
G
Talking on your phone for a long period of time
may reduce call quality due to heat generated
during use.
When the phone is not used for a long period
time, store it in a safe place with the power cord
unplugged.
G
When you use the phone in public places, set the
ringtone to vibration so you don't disturb others.
G
Do not turn your phone on or off when putting it
to your ear.
Use accessories, such as earphones and headsets,
with caution. Ensure that cables are tucked away
safely and do not touch the antenna unnecessarily.
Using the phone in proximity to receiving
equipment (i.e., TV or radio) may cause
interference to the phone.
G
G
Do not use the phone if the antenna is damaged.
If a damaged antenna contacts skin, it may cause a
slight burn. Please contact an LG Authorized
Service Center to replace the damaged antenna.
G
Do not immerse your phone in water. If this
happens, turn it off immediately and remove the
battery. If the phone does not work, take it to an
LG Authorized Service Center.
If you are listening to music whilst out and about,
please ensure that the volume is at a reasonable level
so that you are aware of your surroundings. This is
particularly imperative when attempting to cross the
street.
G
Do not paint your phone.
G
The data saved in your phone might be deleted
due to careless use, repair of the phone, or
upgrade of the software. Please backup your
Safety
G
Avoid damage to your hearing
Damage to your hearing can occur if you are exposed
to loud sound for long periods of time. We therefore
recommend that you do not turn on or off the
handset close to your ear. We also recommend that
music and call volumes are set to a reasonable level.
69
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 70
Safety
FDA Consumer Update
The U.S. Food and Drug Administration’s
Center for Devices and Radiological Health
Consumer Update on Mobile Phones:
1. Do wireless phones pose a health hazard?
Safety
70
The available scientific evidence does not show that
any health problems are associated with using
wireless phones. There is no proof, however, that
wireless phones are absolutely safe. Wireless phones
emit low levels of Radio Frequency (RF) energy in the
microwave range while being used. They also emit
very low levels of RF when in standby mode. Whereas
high levels of RF can produce health effects (by
heating tissue), exposure to low level RF that does
not produce heating effects causes no known adverse
health effects. Many studies of low level RF exposures
have not found any biological effects. Some studies
have suggested that some biological effects may
occur, but such findings have not been confirmed by
additional research. In some cases, other researchers
have had difficulty in reproducing those studies, or in
determining the reasons for inconsistent results.
2. What is the FDA's role concerning the safety of
wireless phones?
Under the law, the FDA does not review the safety of
radiation-emitting consumer products such as
wireless phones before they can be sold, as it does
with new drugs or medical devices. However, the
agency has authority to take action if wireless phones
are shown to emit Radio Frequency (RF) energy at a
level that is hazardous to the user. In such a case, the
FDA could require the manufacturers of wireless
phones to notify users of the health hazard and to
repair, replace, or recall the phones so that the
hazard no longer exists.
Although the existing scientific data do not justify
FDA regulatory actions, the FDA has urged the
wireless phone industry to take a number of steps,
including the following:
G
Support needed research into possible biological
effects of RF of the type emitted by wireless
phones;
G
Design wireless phones in a way that minimizes any
RF exposure to the user that is not necessary for
device function; and
UX3300_Eng.qxd
G
10/9/06
2:58 PM
Page 71
Cooperate in providing users of wireless phones
with the best possible information on possible
effects of wireless phone use on human health.
The FDA belongs to an interagency working group of
the federal agencies that have responsibility for
different aspects of RF safety to ensure coordinated
efforts at the federal level. The following agencies
belong to this working group:
National Institute for Occupational Safety and
Health
G
Environmental Protection Agency
G
Occupational Safety and Health Administration
G
National Telecommunications and Information
Administration
The FCC also regulates the base stations that the
wireless phone networks rely upon. While these base
stations operate at higher power than do the wireless
phones themselves, the RF exposures that people get
from these base stations are typically thousands of
times lower than those they can get from wireless
phones. Base stations are thus not the subject of the
safety questions discussed in this document.
3. What kinds of phones are the subject of this
update?
The National Institutes of Health participates in
some interagency working group activities, as well.
The term “wireless phone” refers here to handheld
wireless phones with built-in antennas, often called
“cell”, “mobile”, or “PCS” phones. These types of
wireless phones can expose the user to measurable
Radio Frequency (RF) energy because of the short
distance between the phone and the user’s head.
The FDA shares regulatory responsibilities for wireless
phones with the Federal Communications
Commission (FCC). All phones that are sold in the
United States must comply with FCC safety
guidelines that limit RF exposure. The FCC relies on
the FDA and other health agencies for safety
These RF exposures are limited by FCC safety
guidelines that were developed with the advice of the
FDA and other federal health and safety agencies.
When the phone is located at greater distances from
the user, the exposure to RF is drastically lower
because a person's RF exposure decreases rapidly
Safety
G
questions about wireless phones.
71
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 72
Safety
with increasing distance from the source. The socalled “cordless phones,” which have a base unit
connected to the telephone wiring in a house,
typically operate at far lower power levels, and thus
produce RF exposures far below the FCC safety
limits.
4. What are the results of the research done
already?
Safety
72
The research done thus far has produced conflicting
results, and many studies have suffered from flaws in
their research methods. Animal experiments
investigating the effects of Radio Frequency (RF)
energy exposures characteristic of wireless phones
have yielded conflicting results that often cannot be
repeated in other laboratories. A few animal studies,
however, have suggested that low levels of RF could
accelerate the development of cancer in laboratory
animals. However, many of the studies that showed
increased tumor development used animals that had
been genetically engineered or treated with cancercausing chemicals so as to be pre-disposed to
develop cancer in the absence of RF exposure. Other
studies exposed the animals to RF for up to 22 hours
per day. These conditions are not similar to the
conditions under which people use wireless phones,
so we do not know with certainty what the results of
such studies mean for human health. Three large
epidemiology studies have been published since
December 2000. Between them, the studies
investigated any possible association between the
use of wireless phones and primary brain cancer,
glioma, meningioma, or acoustic neuroma, tumors of
the brain or salivary gland, leukemia, or other
cancers. None of the studies demonstrated the
existence of any harmful health effects from wireless
phone RF exposures. However, none of the studies
can answer questions about long-term exposures,
since the average period of phone use in these
studies was around three years.
5. What research is needed to decide whether RF
exposure from wireless phones poses a health risk?
A combination of laboratory studies and
epidemiological studies of people actually using
wireless phones would provide some of the data that
are needed. Lifetime animal exposure studies could
be completed in a few years. However, very large
numbers of animals would be needed to provide
reliable proof of a cancer promoting effect if one
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 73
exists. Epidemiological studies can provide data that
is directly applicable to human populations, but ten
or more years follow-up may be needed to provide
answers about some health effects, such as cancer.
This is because the interval between the time of
exposure to a cancer-causing agent and the time
tumors develop — if they do — may be many, many
years. The interpretation of epidemiological studies is
hampered by difficulties in measuring actual RF
exposure during day-to-day use of wireless phones.
Many factors affect this measurement, such as the
angle at which the phone is held, or which model of
phone is used.
The FDA is working with the U.S. National Toxicology
Program and with groups of investigators around the
world to ensure that high priority animal studies are
conducted to address important questions about the
effects of exposure to Radio Frequency (RF) energy.
The FDA and the Cellular Telecommunications &
Internet Association (CTIA) have a formal
Cooperative Research And Development Agreement
(CRADA) to do research on wireless phone safety.
The FDA provides the scientific oversight, obtaining
input from experts in government, industry, and
academic organizations. CTIA-funded research is
conducted through contracts with independent
investigators. The initial research will include both
laboratory studies and studies of wireless phone
users. The CRADA will also include a broad
assessment of additional research needs in the
context of the latest research developments around
the world.
Safety
6. What is the FDA doing to find out more about
the possible health effects of wireless phone RF?
development of a detailed agenda of research needs
that has driven the establishment of new research
programs around the world. The project has also
helped develop a series of public information
documents on EMF issues.
The FDA has been a leading participant in the World
Health Organization International Electro Magnetic
Fields (EMF) Project since its inception in 1996. An
influential result of this work has been the
73
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 74
Safety
7. How can I find out how much Radio Frequency
energy exposure I can get by using my wireless
phone?
Safety
74
All phones sold in the United States must comply with
Federal Communications Commission (FCC)
guidelines that limit Radio Frequency (RF) energy
exposures. The FCC established these guidelines in
consultation with the FDA and the other federal
health and safety agencies. The FCC limit for RF
exposure from wireless phones is set at a Specific
Absorption Rate (SAR) of 1.6 watts per kilogram (1.6
W/kg). The FCC limit is consistent with the safety
standards developed by the Institute of Electrical and
Electronic Engineering (IEEE) and the National
Council on Radiation Protection and Measurement.
The exposure limit takes into consideration the body’s
ability to remove heat from the tissues that absorb
energy from the wireless phone and is set well below
levels known to have effects. Manufacturers of wireless
phones must report the RF exposure level for each
model of phone to the FCC. The FCC website
(http://www.fcc.gov/oet/rfsafety) gives directions for
locating the FCC identification number on your phone
so you can find your phone’s RF exposure level in the
online listing.
8. What has the FDA done to measure the Radio
Frequency energy coming from wireless phones?
The Institute of Electrical and Electronic Engineers
(IEEE) is developing a technical standard for
measuring the Radio Frequency (RF) energy exposure
from wireless phones and other wireless handsets
with the participation and leadership of FDA
scientists and engineers. The standard,
“Recommended Practice for Determining the SpatialPeak Specific Absorption Rate (SAR) in the Human
Body Due to Wireless Communications Devices:
Experimental Techniques”, sets forth the first
consistent test methodology for measuring the rate
at which RF is deposited in the heads of wireless
phone users. The test method uses a tissuesimulating model of the human head. Standardized
SAR test methodology is expected to greatly improve
the consistency of measurements made at different
laboratories on the same phone. SAR is the
measurement of the amount of energy absorbed in
tissue, either by the whole body or a small part of
the body. It is measured in watts/kg (or milliwatts/g)
of matter. This measurement is used to determine
whether a wireless phone complies with safety
guidelines.
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 75
9. What steps can I take to reduce my exposure to
Radio Frequency energy from my wireless phone?
The scientific evidence does not show a danger to
users of wireless phones, including children and
teenagers. If you want to take steps to lower
exposure to Radio Frequency (RF) energy, the
measures described above would apply to children
and teenagers using wireless phones. Reducing the
time of wireless phone use and increasing the
distance between the user and the RF source will
reduce RF exposure.
Some groups sponsored by other national
governments have advised that children be
discouraged from using wireless phones at all. For
example, the government in the United Kingdom
distributed leaflets containing such a
recommendation in December 2000. They noted
that no evidence exists that using a wireless phone
causes brain tumors or other ill effects. Their
recommendation to limit wireless phone use by
children was strictly precautionary; it was not based
on scientific evidence that any health hazard exists.
Safety
If there is a risk from these products — and at this
point we do not know that there is — it is probably
very small. But if you are concerned about avoiding
even potential risks, you can take a few simple steps
to minimize your exposure to Radio Frequency (RF)
energy. Since time is a key factor in how much
exposure a person receives, reducing the amount of
time spent using a wireless phone will reduce RF
exposure. If you must conduct extended
conversations by wireless phone every day, you could
place more distance between your body and the
source of the RF, since the exposure level drops off
dramatically with distance. For example, you could
use a headset and carry the wireless phone away
from your body or use a wireless phone connected to
a remote antenna. Again, the scientific data do not
demonstrate that wireless phones are harmful. But if
you are concerned about the RF exposure from these
products, you can use measures like those described
above to reduce your RF exposure from wireless
phone use.
10. What about children using wireless phones?
75
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 76
Safety
Safety
11. What about wireless phone interference with
medical equipment?
at the same time. This standard was approved by the
IEEE in 2000.
Radio Frequency (RF) energy from wireless phones
can interact with some electronic devices. For this
reason, the FDA helped develop a detailed test
method to measure Electro Magnetic Interference
(EMI) of implanted cardiac pacemakers and
defibrillators from wireless telephones. This test
method is now part of a standard sponsored by the
Association for the Advancement of Medical
Instrumentation (AAMI). The final draft, a joint effort
by the FDA, medical device manufacturers, and many
other groups, was completed in late 2000. This
standard will allow manufacturers to ensure that
cardiac pacemakers and defibrillators are safe from
wireless phone EMI.
The FDA continues to monitor the use of wireless
phones for possible interactions with other medical
devices. Should harmful interference be found to
occur, the FDA will conduct testing to assess the
interference and work to resolve the problem.
The FDA has tested hearing aids for interference from
handheld wireless phones and helped develop a
voluntary standard sponsored by the Institute of
Electrical and Electronic Engineers (IEEE). This
standard specifies test methods and performance
requirements for hearing aids and wireless phones so
that no interference occurs when a person uses a
“compatible” phone and a “compatible” hearing aid
76
12. Where can I find additional information?
For additional information, please refer to the
following resources:
FDA web page on wireless phones
(http://www.fda.gov/cellphones/)
Federal Communications Commission (FCC) RF
Safety Program
(http://www.fcc.gov/oet/rfsafety)
International Commission on Non-lonizing Radiation
Protection
(http://www.icnirp.de)
World Health Organization (WHO) International EMF
Project
(http://www.who.int/emf)
National Radiological Protection Board (UK)
(http://www.hpa.org.uk/radiation/)
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 77
10 Driver Safety Tips
Your wireless phone gives you the powerful ability to
communicate by voice almost anywhere, anytime. An
important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
When operating a car, driving is your first
responsibility. When using your wireless phone
behind the wheel of a car, practice good common
sense and remember the following tips:
2. When available, use a hands-free device. A number
of hands-free wireless phone accessories are
readily available today. Whether you choose an
installed mounted device for your wireless phone
or a speaker phone accessory, take advantage of
these devices if available to you.
4. Suspend conversations during hazardous driving
conditions or situations. Let the person you are
speaking with know you are driving; if necessary,
suspend the call in heavy traffic or hazardous
weather conditions. Rain, sleet, snow, and ice can
be hazardous, but so is heavy traffic. As a driver,
your first responsibility is to pay attention to the
road.
5. Don’t take notes or look up phone numbers while
driving. If you are reading an address book or
business card, or writing a “to-do” list while driving
a car, you are not watching where you are going. It
is common sense. Do not get caught in a
dangerous situation because you are reading or
writing and not paying attention to the road or
nearby vehicles.
Safety
1. Get to know your wireless phone and its features
such as speed dial and redial. Carefully read your
instruction manual and learn to take advantage of
valuable features most phones offer, including
automatic redial and memory. Also, work to
memorize the phone keypad so you can use the
speed dial function without taking your attention
off the road.
3. Make sure you place your wireless phone within
easy reach and where you can reach it without
removing your eyes from the road. If you get an
incoming call at an inconvenient time, if possible,
let your voicemail answer it for you.
77
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 78
Safety
6. Dial sensibly and assess the traffic; if possible,
place calls when you are not moving or before
pulling into traffic. Try to plan your calls before
you begin your trip or attempt to coincide your
calls with times you may be stopped at a stop
sign, red light, or otherwise stationary. But if you
need to dial while driving, follow this simple tip -dial only a few numbers, check the road and your
mirrors, then continue.
Safety
7. Do not engage in stressful or emotional
conversations that may be distracting. Stressful or
emotional conversations and driving do not mix;
they are distracting and even dangerous when you
are behind the wheel of a car. Make people you
are talking with aware you are driving and if
necessary, suspend conversations which have the
potential to divert your attention from the road.
8. Use your wireless phone to call for help. Your
wireless phone is one of the greatest tools you can
own to protect yourself and your family in
dangerous situations -- with your phone at your
side, help is only three numbers away. Dial 911 or
other local emergency number in the case of fire,
traffic accident, road hazard, or medical emergency.
78
Remember, it’s a free call on your wireless phone!
9. Use your wireless phone to help others in
emergencies. Your wireless phone provides you a
perfect opportunity to be a “Good Samaritan” in
your community. If you see an auto accident, crime
in progress or other serious emergency where lives
are in danger, call 911 or other local emergency
number, as you would want others to do for you.
10. Call roadside assistance or a special wireless nonemergency assistance number when necessary.
Certain situations you encounter while driving
may require attention, but are not urgent enough
to merit a call for emergency services. But you
can still use your wireless phone to lend a hand.
If you see a broken-down vehicle posing no
serious hazard, a broken traffic signal, a minor
traffic accident where no one appears injured or a
vehicle you know to be stolen, call roadside
assistance or other special non-emergency
wireless number.
For more information, please call to 888-901-SAFE,
or visit our website www.wow-com.com.
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 79
Consumer Information on SAR
(Specific Absorption Rate)
The exposure standard for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit set by the
FCC is 1.6 W/kg. Tests for SAR are conducted using
standard operating positions specified by the FCC
with the phone transmitting at its highest certified
power level in all tested frequency bands. Although
Before a phone model is available for sale to the
public, it must be tested and certified to the FCC
that it does not exceed the limit established by the
government-adopted requirement for safe exposure.
The tests are performed in positions and locations
(e.g., at the ear and worn on the body) as required
by the FCC for each model.
The highest SAR value for this model phone when
tested for use at the ear is 1.130 W/kg and when
worn on the body, as described in this user guide, is
1.220W/kg (body-worn measurements differ among
phone models, depending upon available accessories
and FCC requirements). While there may be
differences between SAR levels of various phones and
at various positions, they all meet the government
requirement for safe exposure.
Safety
This model phone meets the government's
requirements for exposure to radio waves. Your
wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the
emission limits for exposure to Radio Frequency (RF)
energy set by the Federal Communications
Commission of the U.S. Government. These limits are
part of comprehensive guidelines and establish
permitted levels of RF energy for the general
population. The guidelines are based on standards
that were developed by independent scientific
organizations through periodic and thorough
evaluation of scientific studies. The standards include
a substantial safety margin designed to assure the
safety of all persons, regardless of age and health.
SAR is determined at the highest certified power
level, the actual SAR level of the phone while
operating can be well below the maximum value.
Because the phone is designed to operate at multiple
power levels to use only the power required to reach
the network, in general, the closer you are to a
wireless base station antenna, the lower the power
output.
79
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 80
Safety
The FCC has granted an Equipment Authorization for
this model phone with all reported SAR levels
evaluated as in compliance with the FCC RF emission
guidelines. SAR information on this model phone is
on file with the FCC and can be found under the
Display Grant section of
http://www.fcc.gov/oet/fccid after searching on FCC
ID BEJVX3300. Additional information on Specific
Absorption Rates (SAR) can be found on the Cellular
Telecommunications Industry Association (CTIA)
website at http://www.ctia.org.
Safety
* In the United States and Canada, the SAR limit for
mobile phones used by the public is 1.6 watts/kg
(W/kg) averaged over one gram of tissue. The
standard incorporates a substantial margin of safety
to give additional protection for the public and to
account for any variations in measurements.
FCC Hearing-Aid Compatibility (HAC)
Regulations for Wireless Devices
On July 10, 2003, the U.S. Federal Communications
Commission (FCC) Report and Order in WT Docket
01-309 modified the exception of wireless phones
under the Hearing Aid Compatibility Act of 1988
(HAC Act) to require digital wireless phones be
compatible with hearing-aids. The intent of the HAC
Act is to ensure reasonable access to
telecommunications services for persons with hearing
disabilities.
While some wireless phones are used near some
hearing devices (hearing aids and cochlear implants),
users may detect a buzzing, humming, or whining
noise. Some hearing devices are more immune than
others to this interference noise, and phones also
vary in the amount of interference they generate.
The wireless telephone industry has developed a
rating system for wireless phones, to assist hearing
device users to find phones that may be compatible
with their hearing devices. Not all phones have been
rated. Phones that are rated have the rating on their
box or a label located on the box.
80
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 81
The ratings are not guarantees. Results will vary
depending on the user's hearing device and hearing
loss. If your hearing device happens to be vulnerable
to interference, you may not be able to use a rated
phone successfully. Trying out the phone with your
hearing device is the best way to evaluate it for your
personal needs.
M-Ratings: Phones rated M3 or M4 meet FCC
requirements and are likely to generate less
interference to hearing devices than phones that are
not labeled. M4 is the better/higher of the two
ratings.
Safety
Hearing devices may also be rated. Your hearing
device manufacturer or hearing health professional
may help you find this rating. Higher ratings mean
that the hearing device is relatively immune to
interference noise. The hearing aid and wireless
phone rating values are then added together. A sum
of 5 is considered acceptable for normal use. A sum
of 6 is considered for best use.
In the above example, if a hearing aid meets the M2
level rating and the wireless phone meets the M3
level rating, the sum of the two values equal M5. This
should provide the hearing aid user with “normal
usage” while using their hearing aid with the
particular wireless phone. “Normal usage” in this
context is defined as a signal quality that is
acceptable for normal operation.
The M mark is intended to be synonymous with the
U mark. The T mark is intended to be synonymous
with the UT mark. The M and T marks are
recommended by the Alliance for
Telecommunications Industries Solutions (ATIS). The
U and UT marks are referenced in Section 20.19 of
the FCC Rules. The HAC rating and measurement
procedure are described in the American National
81
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 82
Safety
Standards Institute (ANSI) C63.19 standard.
When you're talking over the cell phone, it's
recommended you'd turn the Bluetooth mode off for
HAC.
For information about hearing aids and digital
wireless phones
FCC Hearing Aid Compatibility and Volume
Control
http://www.fcc.gov/cgb/dro/hearing.html
Gallaudet University, RERC
Safety
http://tap.gallaudet.edu/DigWireless.KS/DigWirel
ess.htm
Self Help for Hard of Hearing People Inc.
[SHHH]
http://www.hearingloss.org/learn/cellphonetech.asp
The Hearing Aid Compatibility FCC Order
http://hraunfoss.fcc.gov/edocs_public/attachmatc
h/FCC-03-168A1.pdf
82
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 83
Accessories
There are a variety of accessories available for your mobile
phone. Consult your local dealer for availability.
Battery Charger
The power adapter, allows you to The
battery charger, allows you to power your
phone using.
Battery
Two batteries are available. The standard
battery, and the extended battery.
Vehicle Power Adapter
Hands-Free Car Kit (Portable)
The hands-free car kit enables you to
attach the phone to the power jack in
your car, providing you with hands-free
operation. It can charge a completely
discharged battery in 5 hours.
The hands-free headset connects to your
phone allowing hands-free operation. It
includes earpiece, microphone.
Note
It operates in vibration/no sound mode
on Manner Mode/ Silence All Mode
even when connected to headset.
Serial Data Cable
The serial data cable, enables you to
connect your phone to your PC.
USB Converter Cable
Connects your phone to your PC.
Battery Pack Charger
The battery pack charger allows you to
charge the battery pack itself without the
phone. It can charge a completely
discharged standard battery in 3.5 hours.
Safety
The cigarette lighter charger allows you
to operate the phone and trickle charge
the phone’s battery from your vehicle. It
takes 5 hours to charge a completely
discharged battery.
Hands-free Headset
Holster
Changeable Plate
83
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 84
Warranty Information
1. WHAT THIS WARRANTY COVERS:
LG offers you a limited warranty that the enclosed
subscriber unit and its enclosed accessories will be
free from defects in material and workmanship,
according to the following terms and conditions:
Warranty information
(1) The limited warranty for the product extends for
TWELVE (12) MONTHS beginning on the date
of purchase of the product with valid proof of
purchase, or absent valid proof of purchase,
FIFTEEN (15) MONTHS from date of
manufacture as determined by the unit’s
manufacture date code.
(2) The limited warranty extends only to the original
purchaser of the product and is not assignable
or transferable to any subsequent purchaser/end
user.
(3) This warranty is good only to the original
purchaser of the product during the warranty
period as long as it is in the U.S, including
Alaska, Hawaii, U.S. Territories and Canada.
84
(4) The external housing and cosmetic parts shall be
free of defects at the time of shipment and,
therefore, shall not be covered under these
limited warranty terms.
(5) Upon request from LG, the consumer must
provide information to reasonably prove the date
of purchase.
(6) The customer shall bear the cost of shipping the
product to the Customer Service Department of
LG. LG shall bear the cost of shipping the
product back to the consumer after the
completion of service under this limited warranty.
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 85
2. WHAT THIS WARRANTY DOES NOT COVER:
(1) Defects or damages resulting from use of the
product in other than its normal and customary
manner.
(3) Breakage or damage to antennas unless caused
directly by defects in material or workmanship.
(7) Damage resulting from use of non-LG approved
accessories.
(8) All plastic surfaces and all other externally
exposed parts that are scratched or damaged
due to normal customer use.
(9) Products operated outside published maximum
ratings.
(10)Products used or obtained in a rental program.
(11) Consumables (such as fuses).
Warranty information
(2) Defects or damages from abnormal use,
abnormal conditions, improper storage,
exposure to moisture or dampness,
unauthorized modifications, unauthorized
connections, unauthorized repair, misuse,
neglect, abuse, accident, alteration, improper
installation, or other acts which are not the fault
of LG, including damage caused by shipping,
blown fuses, spills of food or liquid.
(6) This limited warranty is in lieu of all other
warranties, express or implied either in fact or by
operations of law, statutory or otherwise,
including, but not limited to any implied warranty
of marketability or fitness for a particular use.
(4) That the Customer Service Department at LG
was not notified by consumer of the alleged
defect or malfunction of the product during the
applicable limited warranty period.
(5) Products which have had the serial number
removed or made illegible.
85
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 86
Warranty Information
Warranty information
86
3. STATE LAW RIGHTS:
4. HOW TO GET WARRANTY SERVICE:
No other express warranty is applicable to this
product. THE DURATION OF ANY IMPLIED
WARRANTIES, INCLUDING THE IMPLIED
WARRANTY OF MARKETABILITY, IS LIMITED TO
THE DURATION OF THE EXPRESS WARRANTY
HEREIN. LGE MOBILECOMM USA INC. SHALL NOT
BE LIABLE FOR THE LOSS OF THE USE OF THE
PRODUCT, INCONVENIENCE, LOSS OR ANY
OTHER DAMAGES, DIRECT OR CONSEQUENTIAL,
ARISING OUT OF THE USE OF, OR INABILITY TO
USE, THIS PRODUCT OR FOR ANY BREACH OF
ANY EXPRESS OR IMPLIED WARRANTY,
INCLUDING THE IMPLIED WARRANTY OF
MARKETABILITY APPLICABLE TO THIS PRODUCT.
To obtain warranty service, please call or fax to the
following telephone numbers from anywhere in the
continental United States:
Some states do not allow the exclusive limitation of
incidental or consequential damages or limitations on
how long an implied warranty lasts; so these
limitations or exclusions may not apply to you. This
warranty gives you specific legal rights and you may
also have other rights which vary from state to state.
Tel. 1-800-793-8896 or Fax. 1-800-448-4026
Or visit http://us.lgservice.com. Correspondence may
also be mailed to:
LG Electronics Service- Mobile Handsets
P.O. Box 240007, Huntsville, AL 35824
DO NOT RETURN YOUR PRODUCT TO THE
ABOVE ADDRESS. Please call or write for the
location of the LG authorized service center nearest
you and for the procedures for obtaining warranty
claims.
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 87
Index
10 Driver Safety Tips
2-sec Pause (T)
77
29
A
Accessories
Alarm Clock
Answer Call
Auto Answer
Auto NAM
Auto Retry
Auto Volume
83
49
59
60
57
59
60
Backlight
Banner
Battery
54
54
13
C
Calculator
Call Setup
Call Timer
50
59
38
F
L
FDA Consumer Update 70
Fonts
56
Language
List Contacts
Location
Lock Mode
Lock Phone
D
Hard Pause (P)
Data Settings
Dialed Calls
Display
DTMF Length
61
37
54
53
E
Emergency #s
Erase All
Erase Calls
Erase Contacts
EZ Tip Calc
58
47
38
59
50
G
Groups
35
M
H
29
I
Icon Glossary
Important Safety
Precautions
Inbox
63
1
42
K
Key Tone
56
34
62
17
58
51
Manner Mode
Menu Access
Menu Style
Menus Overview
Message Alerts
Messages
Missed Calls
Msg Settings
Mute Function
My Contact Info
My Phone Number
My Shortcut
17
33
55
11
52
39
38
45
17
36
63
50
Index
B
Call Waiting
18
Caller ID
18
Change Lock
59
Clocks
55
Consumer Information on
SAR
79
Contacts
34
Contrast
55
87
UX3300_Eng.qxd
10/9/06
2:58 PM
Page 88
Index
N
New E-mail
New Message
New Number
Notepad
R
35
40
35
50
Received Calls
Recent Calls
Reset Default
Restrict Calls
Ringers
60
44
S
38
37
59
58
51
O
One-Touch Dial
Outbox
P
Index
88
PC Connection
Phone Info
Phone Overview
Power On/Off Tone
Power Saver
61
63
10
53
56
S/W Version
Safety Information
Saved
Schedule
Screen Icons
Screens
Security
Select System
Service Alerts
Serving System
63
67
45
48
15
55
58
57
52
57
Set NAM
Settings
Shortcut Help
Signal Strength
Sounds
Speed Dialing
Speed Dials
Status Light
System
57
51
63
14
51
18
36
56
57
T
Text Input
Theme Colors
TIA Safety Information
Tools
Train Words
TTY Mode
19
55
64
48
62
61
V
Voice Dial Prompt
62
Voice Dialing
18
Voice Dials
36
Voice Mail
40
Voice Memo
49
Voice Privacy
60
Voice Services
62
Volume
52
Volume Quick Adjustment
17
W
Warranty Information
World Clock
84
50
memo_new_150x120
MEMO
10/9/06
3:10 PM
Page 1
memo_new_150x120
MEMO
10/9/06
3:10 PM
Page 1
memo_new_150x120
MEMO
10/9/06
3:10 PM
Page 1
Download PDF

advertising