LG | UX390 | User's Manual | LG UX390 User's Manual

UX390 cover(final).qxd
7/7/06
5:12 PM
Page 1
U X 39 0
ENGLISH
USER GUIDE
Lea este manual cuidadosamente antes de utilizar su teléfono. Guárdelo para
consultarlo en el futuro.
U X 39 0
MANUAL DEL USUARIO
U X 39 0
USER GUIDE
Please read this manual carefully before operating your mobile
phone. Retain it for future reference.
P/N: MMBB0183101(1.0)
G
ESPAÑOL
UX390 cover(final).qxd
7/7/06
5:12 PM
Page 2
Copyright ©2006 LG Electronics, Inc. All rights reserved.
LG and the LG logo are registered trademarks of LG Group
and its related entities. All other trademarks are the property
of their respective owners.
UX390_Eng.qxd
7/7/06
6:00 PM
Page 1
IMPORTANT SAFETY PRECAUTIONS
WARNING! Violation o f t he i nstructions m ay c ause s erious i njury o r d eath.
1. Never use an unapproved battery since this could damage the phone and/or battery and could
cause the battery to explode.
2. Never place your phone in a microwave oven as it will cause the battery to explode.
3. Never store your phone in temperatures less than -4°F or greater than 122°F.
4. Do not dispose of your battery by fire or with hazardous or flammable materials.
I M P O RTA N T SA F E T Y P R E C AU T I O N S
Read these instructions. Breaking the rules may be dangerous or illegal.
Further detailed information is given in this user guide.
5. When riding in a car, do not leave your phone or set up the hands-free kit near to the air bag. If
wireless equipment is improperly installed and the air bag is deployed, you may be seriously
injured.
6. Do not use a hand-held phone while driving.
7. Do not use the phone in areas where its use is prohibited. (For example: aircraft)
1
UX390_Eng.qxd
7/7/06
6:00 PM
Page 2
IMPORTANT SAFETY PRECAUTIONS
I M P O RTA N T SA F E T Y P R E C AU T I O N S
1. Do not expose the battery charger or adapter to direct sunlight or use it in places with high
humidity, such as a bathroom.
2. Do not use harsh chemicals (such as alcohol, benzene, thinners, etc.) or detergents to clean
your phone. This could cause a fire.
3. Do not drop, strike, or shake your phone severely. It may harm the internal circuit boards of the
phone.
4. Do not use your phone in high explosive areas as the phone may generate sparks.
5. Do not damage the power cord by bending, twisting, pulling, or heating. Do not use the plug if
it is loose as it may cause a fire or electric shock.
6. Do not place any heavy items on the power cord. Do not allow the power cord to be crimped as
it may cause electric shock or fire.
7. Do not handle the phone with wet hands while it is being charged. It may cause an electric
shock or seriously damage your phone.
8. Do not disassemble the phone.
2
UX390_Eng.qxd
7/7/06
6:00 PM
Page 3
2. Do not hold or let the antenna come in contact with your body during a call.
3. Make sure that no sharp-edged items such as animal’s teeth or nails, come into contact with the
battery. This could cause a fire.
4. Store the battery out of reach of children.
5. Be careful that children do not swallow any parts (such as rubber plugs, earphone, connection
parts of the phone, etc.) This could cause asphxiation or suffocation resulting in serious injury
or death.
6. Unplug the power cord and charger during lightning storms to avoid electric shock or fire.
I M P O RTA N T SA F E T Y P R E C AU T I O N S
1. Do not place or answer calls while charging the phone as it may short-circuit the phone and/or
cause electric shock or fire.
7. Only use the batteries and chargers provided by LG. The warranty will not be applied to
products provided by other suppliers.
8. Only authorized personnel should service the phone and its accessories. Faulty installation or
service may result in accidents and consequently invalidate the warranty.
9. An emergency call can be made only within a service area. For an emergency call, make sure that
you are within a service area and that the phone is turned on.
3
UX390_Eng.qxd
7/7/06
6:00 PM
Page 4
TABLE OF CONTENTS
Important Safety Precautions 1
TA B L E O F C O N T E N T S
Table of Contents
Welcome
4
9
17
Turning the Phone On and Off
17
Turning the Phone On
17
Turning the Phone Off
17
Signal Strength
17
Screen Icons
Technical Details
FCC RF Exposure Information
Phone Overview
Menus Overview
10
11
12
14
Getting Started with Your
Phone
16
4
Battery Charge Level
18
Entering and Editing
Information
Text Input
Key Functions
Text Input Examples
22
22
22
23
Using Abc (Multi-tap) Text Input
23
Using T9 Mode Text Input
23
Making Calls
19
Correcting Dialing Mistakes
19
Using the NEXT Key (In T9 Mode) 24
Redialing Calls
19
Adding Words to the T9 Database 24
Receiving Calls
19
Quick Access to Convenient
Features
20
Manner Mode
20
Lock Mode
20
20
Menu Access
16
Mute Function
The Battery
16
Volume Quick Adjustment
20
Installing the Battery
16
Call Waiting
21
Removing the Battery
16
Caller ID
Charging the Battery
17
Speed Dialing
Contacts in Your Phone’s
Memory
25
The Basics of Storing Contacts
Entries
25
Options to Customize Your
Contacts
26
Adding or Changing the Group
26
Changing the Call Ringer
26
Changing the Message Ringer
27
21
Adding or Changing the Memo
27
21
Adding or Changing the Picture ID 27
UX390_Eng.qxd
7/7/06
6:00 PM
Adding Speed Dial
Editing Contacts Entries
From standby mode
28
Searching by Letter
33
4. Erase Calls
40
28
Searching Options
33
5. Call Timer
40
6. KB Counter
41
28
28
Making a Call From Your Phone’s
Memory
34
28
From Contacts
Default Numbers
29
From Recent Calls (
Changing the Default Number
29
Speed Dialing
35
Editing Stored Phone Numbers
29
Prepending a Stored Number
35
Editing Stored Names
29
Editing Customized Options
30
Through Contacts
Deleting
30
Contacts
1. List Contacts
34
as a hot key)35
36
36
Messages
42
1. Voice Mail
43
2. New Text Msg
44
The Basics of Sending a
Text Message
44
Customizing the Text Message Using
Options
44
Deleting a Phone Number from a
Contact
2. New Number
37
30
3. New E-mail
37
Using Contacts to Send a
Text Message
Deleting a Contact Entry
30
4. Groups
37
Text Options
45
5. Speed Dials
38
Message Icon Reference
46
6. My Contact Info
38
Additional Ways to Delete a Contact 31
Deleting a Speed Dial
31
Phone Numbers With Pauses
31
Storing a Number with Pauses
32
Adding a Pause to an Existing
Number
32
Recent Calls
39
1. Dialed Calls
39
Searching Your Phone’s Memory
33
2. Received Calls
40
Scrolling Through Your Contacts
33
3. Missed Calls
40
TA B L E O F C O N T E N T S
Adding Another Phone Number
Page 5
45
3. New Photo Msg
46
4. Inbox
47
5. Outbox
49
6. Saved
50
7. Msg Settings
50
5
UX390_Eng.qxd
7/7/06
6:00 PM
Page 6
TABLE OF CONTENTS
TA B L E O F C O N T E N T S
7.1 Auto Save
50
Incoming SpeedTalkSM (Barge) 55
7.2 Auto Erase
50
Incoming SpeedTalkSM (Alert) 55
1. Schedule
62
7.3 Photo-Auto Receive
50
Incoming SpeedTalk (Group) 56
2. Alarm Clock
63
7.4 Callback #
50
1. SpeedTalkSM Contacts
56
3. Voice Memo
64
7.5 Signature
50
64
51
2. New SpeedTalk Contact 57
4. My Shortcut
7.6 Voice Mail #
7.7 Text Auto View
51
3. New SpeedTalkSM Group
57
5. Notepad
64
4. Recent SpeedTalk
57
6. Ez Tip Calc
65
65
66
SM
SM
7.8 Entry Mode
51
7.9 Insert Quick-Text
51
5. SpeedTalk Settings
57
7. Calculator
7.0 Text Auto Play (On/ Off)
51
5.1 SpeedTalkSM On/Off
57
8. World Clock
8. Erase All
51
5.2 Speaker On/Off
58
SpeedTalkSM
52
5.3 SpeedTalkSM Alert Tone
58
Call from SpeedTalk Contact
List (Barge)
53
SM
Call from SpeedTalkSM Contact
List (Alert)
53
Call from SpeedTalkSM Contact
List (Group)
54
Call from Keypad (Barge)
6
SM
Tools
54
SM
Settings
62
67
1. Sounds
67
59
1.1 Ringers
67
1. easyedge
60
1.2 Key Tone
67
2. Help
60
1.3 Volume
68
easyedgeSM
Media
61
1. Images
61
2. Sounds
61
1.4 Message Alerts
68
1.5 Service Alerts
68
1.5.1 Service Change
68
1.5.2 Minute Beep
68
UX390_Eng.qxd
7/7/06
6:00 PM
Page 7
68
3.1 Select System
72
1.5.4 Back To Top
68
3.2 Set NAM
72
1.6 Power On/Off Tone
69
3.3 Auto NAM
72
1.7 DTMF Length
69
3.4 Serving System
72
2. Display
69
2.1 Banner
69
2.2 Backlight
6.1 PC Connection
7. Voice Services
76
77
77
77
73
7.1 Voice Commands
77
4.1 Lock Phone
73
7.2 Sound Modes
78
69
4.2 Restrict Calls
73
7.3 Announce Alerts
78
2.2.1 LCD
69
4.3 Emergency #s
74
2.2.2 Key Light Timer
70
7.4 Best Match
78
4.4 Change Lock
74
7.5 Train Words
79
2.3 Screens
70
2.4 Menu Style
70
2.5 Clocks
70
2.6 Theme Colors
70
2.7 Contrast
71
2.8 Fonts
71
2.8.1 Calling Digits
71
2.8.2 Text Editor
71
2.9 Language
71
2.0 Power Saver
72
3. System
72
4. Security
5.8 Airplane Mode
6. Data Settings
4.5 Erase Contacts
74
4.6 Reset Default
74
5. Call Setup
75
5.1 Auto Retry
75
5.2 Answer Call
75
5.3 Auto Answer
75
7.6 Help
79
Phone Info
80
1. My Phone Number
80
2. S/W Version
80
80
80
5.4 One-Touch Dial
75
5.5 Voice Privacy
76
4. Shortcut Help
5.6 Auto Volume
76
5.7 TTY Mode
76
79
8. Location
3. Icon Glossary
TA B L E O F C O N T E N T S
1.5.3 Call Connect
7
UX390_Eng.qxd
7/7/06
6:00 PM
Page 8
TABLE OF CONTENTS
Safety
TA B L E O F C O N T E N T S
TIA Safety Information
81
81
Exposure to Radio Frequency Signal 81
Antenna Care
81
Phone Operation
81
Tips on Efficient Operation
82
Driving
82
Electronic Devices
82
Pacemakers
82
Persons with pacemakers:
82
Hearing Aids
83
Other Medical Devices
83
Health Care Facilities
83
Vehicles
83
Posted Facilities
83
Aircraft
83
Blasting Areas
83
Potentially Explosive Atmosphere
84
For Vehicles Equipped with an
Air Bag
84
Safety Information
Accessories
100
84
Charger and Adapter Safety
84
Battery Information and Care
84
Explosion, Shock, and Fire Hazards 85
General Notice
85
Avoid damage to your hearing
86
FDA Consumer Update
87
10 Driver Safety Tips
94
Consumer Information on
SAR
96
Some of contents in this user guide maybe different from your phone
depending on the software of the phone or your service provider. Features
and specifications might be subject to change without prior notice.
8
FCC Hearing-Aid Compatibility
(HAC) Regulations for Wireless
Devices
97
Limited Warranty Statement 101
Index
104
UX390_Eng.qxd
7/7/06
6:00 PM
Page 9
WELCOME
Important Information
This user’s guide provides important information on
the use and operation of your phone. Please read all
the information carefully prior to using the phone for
the best performance and to prevent any damage to
or misuse of the phone. Any unapproved changes or
modifications will void your warranty.
●
SpeedTalkSM Capability.
●
Large, easy-to-read, 9-line backlit LCD with status
icons
●
Paging, messaging, voice mail, and caller ID.
●
22-key keypad.
●
Speakerphone feature.
This device and its accessories comply with part 15 of
FCC rules. Operation is subject to the following two
conditions: (1) This device and its accessories may not
cause harmful interference, and (2) this device and its
accessories must accept any interference received,
including interference that causes undesired operation.
●
Menu-driven interface with prompts for easy
operation and configuration.
Technical Details
●
Any key answer, auto answer, auto retry, one-touch
and speed dialing with 99 memory locations.
●
Bilingual (English and Spanish) capabilities.
●
Advanced Voice Recognition.
●
Animated Wallpaper in Standby Mode.
W E LC O M E
Thank you for choosing the advanced and compact
UX390 cellular phone, designed to operate with the
latest digital mobile communication technology, Code
Division Multiple Access (CDMA) and Advanced
Mobile Phone Service (AMPS). Along with the many
advanced features of the CDMA system, such as
significantly enhanced voice clarity, this phone offers:
FCC Part 15 Class B Compliance
The UX390 is an a tri-mode phone that operates on
both (Code Division Multiple Access CDMA)
frequencies: cellular services at 800 MHz and (Personal
Communication Services PCS) at 1.9 Ghz. Also, the
UX390 works on Advanced Mobile Phone Service. We
call it a tri-mode phone. Since the phone operates on
Cellular, PCS and AMPS, the call fail rate is less than on
a conventional dual-mode or singlemode phone.
9
UX390_Eng.qxd
7/7/06
6:00 PM
Page 10
TECHNICAL DETAILS
T E C H N I C A L D E TA I L S
CDMA technology uses a feature called DSSS
Description
CDMA Standard Designator
(Direct Sequence Spread Spectrum) that enables
CDMA
Tri-Mode Air Interface
TIA/EIA-95A
the phone to keep communication from being
14.4kbps radio link protocol and
TSB-74
crossed and to use one frequency channel by
Basic Air
ANSI J-STD-008 inter-band operations
multiple users in the same specific area. This
IS-95 adapted for PCS frequency
TIA/EIA-IS2000
Interface
results in a 10-fold capacity increase when
ANSI TIA/EIA 553A band cdma2000 1xRTT AirInterface
Advanced Mobile Phone Service
compared with analog mode. In addition, features
such as soft / softer handoff, hard Handoff, and
TIA/EIA/IS-634
MAS-BS
dynamic RF power control technologies combine
TIA/EIA/IS/651
PCSC-RS
Network
to reduce call interruptions.
TIA/EIA/IS-41-C Intersystem operations
The Cellular and PCS CDMA networks consist
of MSO (Mobile Switching Office), BSC (Base
Station Controller), BTS (Base Station
Transmission System), and MS (Mobile Station).
Service
* TSB-74: Protocol between an IS-95A system
and ANSI J-STD-008
1xRTT system receives twice as many
subscribers in the wireless section as IS-95. Its
battery life is twice as long as IS-95. Highspeed data transmission is also possible.
The following table lists some major CDMA
standards.
10
Performance
TIA/EIA/IS-124
Non-signaling data comm.
TIA/EIA/IS-96-B
TIA/EIA/IS-99
TIA/EIA/IS-637
TIA/EIA/IS-657
IS-801
TIA/EIA/IS-707-A
Speech CODEC
Async Data and Fax
Short message service
Packet Data
Position Determination
Service (gpsOne)
High Speed Packet Data
TIA/EIA/IS-97
TIA/EIA/IS-98
ANSI J-STD-018
ANSI J-STD-019
TIA/EIA/IS-125
Cellular base station
Cellular mobile station
PCS personal station
PCS base station
Speech CODEC
UX390_Eng.qxd
7/7/06
6:00 PM
Page 11
FCC RF Exposure Information
WARNING! Read this information before operating
the phone.
The design of this phone complies with the FCC
guidelines and these international standards.
Bodily Contact During Operation
This device was tested for typical use with the back
of the phone kept 0.6 inches (1.5 cm) from the
body. To comply with FCC RF exposure requirements,
a minimum separation distance of 0.6 inches (1.5 cm)
must be maintained between the user’s body and the
back of the phone, including the antenna, whether
extended or retracted. Third-party belt-clips, holsters,
and similar accessories containing metallic
Vehicle-Mounted External Antenna
(Optional, if available.)
A minimum distance of 8 inches (20cm) must be
maintained between the user / bystander and the
vehicle-mounted external antenna to satisfy FCC RF
exposure requirements. For more information about
RF exposure, visit the FCC website at www.fcc.gov.
T E C H N I C A L D E TA I L S
In August 1996, the Federal Communications
Commission (FCC) of the United States, with its action in
Report and Order FCC 96-326, adopted an updated
safety standard for human exposure to Radio Frequency
(RF) electromagnetic energy emitted by FCC regulated
transmitters. Those guidelines are consistent with the
safety standard previously set by both U.S. and
international standards bodies.
components should not be used. Avoid the use of
accessories that cannot maintain 0.6 inches (1.5 cm)
distance between the user’s body and the back of the
phone and have not been tested for compliance with
FCC RF exposure limits.
Caution
Use only the supplied and approved antenna. Use of
unauthorized antennas or modifications could impair
call quality, damage the phone, void your warranty
and/or result in violation of FCC regulations.
Do not use the phone with a damaged antenna. If a
damaged antenna comes into contact with the skin a
minor burn may result. Contact your local dealer for
a replacement antenna.
11
UX390_Eng.qxd
7/7/06
6:00 PM
Page 12
PHONE OVERVIEW
1. Detach the earphone cap
using the crack with your
nail toward right.
Earpiece
2. Swivel the cap downward.
3. Plug in the earphone into
the earphone jack.
P H O N E OV E RV I E W
LCD Screen
Earphone Jack
Flip
Left Soft Key
SEND Key
Side Keys
BACK Key
Voice Commands Key
Manner Mode Key
Navigation Keys
Right Soft Key
Speaker Key
END/PWR Key
Alphanumeric Keypad
Lock Mode Key
Microphone
12
SpeedTalkSM Key
Charger port
UX390_Eng.qxd
7/7/06
6:00 PM
Page 13
Earpiece Lets you hear the caller.
LCD Screen Displays messages and indicator icons.
Flip Open the case to answer an incoming call and
close to end the call.
SEND Key Use to place or answer calls.
Side Keys Use to adjust the ringer volume in standby
mode and the earpiece volume during a call.
BACK Key Press to delete a single space or character.
Press and hold to delete entire words. Press this key
once in a menu to go back one level.
Voice Commands Key Use for access to Voice
Commands and Voice Memo.
Manner Mode Key Use to set the Manner Mode
(from standby mode press and hold
for about
3 seconds).
END/PWR Key Use to turn the power on/off and to
end a call. Also use to return to the main menu
display screen.
Alphanumeric Keypad Use to enter numbers and
characters and select menu items.
Lock Mode Key Use in standby mode to set the lock
function by pressing and holding the key
for
about 3 seconds.
Microphone Lets callers hear you.
Earphone Jack Use to plug the earphone to let you
hear callers.
P H O N E OV E RV I E W
Left Soft Key Use to display the function setting
menu.
Speaker Key Use to turn speakerphone on/off on
the right side of the phone.
SpeedTalkSM Key Press to use the SpeedTalkSM
Function.
Charger port Connects the charger to the phone.
Navigation Key Use for quick access to Messages,
My Speaker on, Axcess Apps. and Mobile Web.
Right Soft Key Use to select an action within a
menu.
13
UX390_Eng.qxd
7/7/06
6:00 PM
Page 14
MENUS OVERVIEW
Contacts
M E N U S OV E RV I E W
14
1. List Contacts
2. New Number
3. New E-mail
4. Groups
5. Speed Dials
6. My Contact Info
Recent Calls
1. Dialed Calls
2. Received Calls
3. Missed Calls
4. Erase Calls
1. Dialed Calls
2. Received Calls
3. Missed Calls
4. All Calls
5. Call Timer
1. Last Call
2. Home Calls
3. Roam Calls
4. All Calls
6. KB Counter
1. Received
2. Transmitted
3. Total
Messages
1. Voice Mail
2. New Text Msg
3. New Photo Msg
4. Inbox
5. Outbox
6. Saved
7. Msg Settings
1. Auto Save
2. Auto Erase
3. Photo-Auto Receive
4. Callback #
5. Signature
6. Voice Mail #
7. Text Auto View
8. Entry Mode
9. Insert Quick-Text
0. Text Auto Play
8. Erase All
1. Inbox
2. Outbox
3. Saved
4. All
SpeedTalkSM
1. ST Contacts
2. New ST Contact
3. New ST Group
4. Recent ST
5. ST Settings
1. ST On/Off
2. Speaker On/Off
3. ST Alert Tone
easyedgeSM
1. easyedgeSM
2. Help
Media
1. Images
2. Sounds
UX390_Eng.qxd
7/7/06
6:00 PM
Page 15
Settings
1. Schedule
2. Alarm Clock
1. Alarm 1
2. Alarm 2
3. Alarm 3
4. Quick Alarm
3. Voice Memo
4. My Shortcut
5. Notepad
6. Ez Tip Calc
7. Calculator
8. World Clock
1. Sounds
1. Ringers
2. Key Tone
3. Volume
4. Message Alerts
5. Service Alerts
6. Power On/Off Tone
7. DTMF Length
2. Display
1. Banner
2. Backlight
3. Screens
4. Menu Style
5. Clocks
6. Theme Colors
7. Contrast
8. Fonts
9. Language
0. Power Saver
3. System
1. Select System
2. Set NAM
3. Auto NAM
4. Serving System
4. Security
1. Lock Phone
2. Restrict Calls
3. Emergency #s
4. Change Lock
5. Erase Contacts
6. Reset Default
5. Call Setup
1. Auto Retry
2. Answer Call
3. Auto Answer
4. One-Touch Dial
5. Voice Privacy
6. Auto Volume
7. TTY Mode
8. Airplane Mode
6. Data Settings
1. PC Connection
7. Voice Services
1. Voice Commands
2. Sound Modes
3. Announce Alerts
4. Best Match
5. Train Words
6. Help
8. Location
Phone Info
M E N U S OV E RV I E W
Tools
1. My Phone Number
2. S/W Version
3. Icon Glossary
4. Shortcut Help
15
UX390_Eng.qxd
7/7/06
6:00 PM
Page 16
GETTING STARTED WITH YOUR PHONE
Menu Access
Press Left Soft Key Menu to access nine phone
menus. There are two methods of accessing menus
and submenus:
●
●
Use the navigation key to highlight and select, or
Press the number key that corresponds to the
menu (or submenu).
For example:
G E T T I N G STA RT E D W I T H YO U R P H O N E
16
1. Press Left Soft Key Menu to display nine menu
items.
Use
to scroll through the list of menus.
2. Press the appropriate number key corresponding
to the menu item you want to select.
The sub-menu list will be displayed.
3. Press the appropriate number key corresponding
to the sub-menu you want to access.
4. Use
press
Note
to highlight your preferred setting, then
to select it.
Press
to go back one step (while accessing a menu or
selecting a setting). Changes to settings will not be saved.
The Battery
Note
It is important to fully charge the battery before initial use
of the phone.
The phone comes with a rechargeable battery. Keep
the battery charged while not in use in order to
maximize talk and standby time. The battery charge
level is shown at the top of the LCD screen.
Installing the Battery
To install the battery, insert the battery into the
opening on the back of the phone. Put the battery
cover on the battery and push it slightly upwards.
Removing the Battery
Turn the power off. Push down slightly. Pull the
battery cover downward and remove it. Then remove
the battery by pressing the upper area of it.
UX390_Eng.qxd
7/7/06
6:00 PM
Page 17
Charging the Battery
Turning the Phone On and Off
To use the charger provided with your phone:
Warning! Use only the charger provided with the
phone. Using any charger other than the one included
with the UX390 may damage your phone or battery.
1. Plug the end of the adapter into the phone’s
charger port and the other end into an electrical
outlet. (See the illustration on page 12.)
2. Press
for about 3 seconds until the LCD
screen lights up.
Note
Like any other radio device, avoid contact with the
antenna while your phone is on.
Battery Charge Level
The battery charge level is shown at the top right of
the LCD screen. When the battery charge level
becomes low, the low battery sensor alerts you in
three ways: sounding an audible tone, blinking the
battery icon, and displaying Low Battery. If the
battery charge level becomes exceedingly low, the
phone automatically switches off and any function in
progress is not saved.
Fully Charged
Empty
Turning the Phone Off
1. Press and hold
until the display turns off.
Signal Strength
Call quality depends on the signal strength in your
area. The signal strength is indicated on the screen
as the number of bars next to the signal strength
icon: The more bars, the better the signal strength. If
the signal quality is poor, move to an open area. If
you are in a building, the reception may be better
near a window.
G E T T I N G STA RT E D W I T H YO U R P H O N E
2. The charge time varies depending upon the
battery level.
Turning the Phone On
1. Install a charged battery or connect the phone to
an external power source such as a cigarette lighter
charger or hands-free car kit.
17
UX390_Eng.qxd
7/7/06
6:00 PM
Page 18
GETTING STARTED WITH YOUR PHONE
Screen Icons
When the phone is on, the top line of the LCD screen displays phone status icons. To see the icon glossary, go
to Menu -> Phone Info -> Icon Glossary on your phone.
Signal strength indicator. The strength of the signal received by the phone is indicated by the number of bars
displayed.
Battery Strength. Indicates battery charge level.
In call state indicator. A call is in progress. * No icon indicates the phone is in Main Menu Screen.
G E T T I N G STA RT E D W I T H YO U R P H O N E
18
No service indicator. The phone is not receiving a system signal.
New Messages.
New voice mails indicator.
New Msgs & Voice.
Digital indicator.
Analog indicator.
Manner Mode.
SSL.
TTY.
Silence All.
Location on mode.
E911 only mode.
Alarm.
1x Data Active\.
Airplane Mode.
Roaming.
Driving mode.
Announce mode.
Announce alerts.
Speaker On.
IS-2000.
SpeedTalk On.
SM
UX390_Eng.qxd
7/7/06
6:00 PM
Page 19
Making Calls
Correcting Dialing Mistakes
1. Make sure the phone is turned on. If not, press
for about 3 seconds.
If you make a mistake while dialing a number, press
once to erase the last digit entered, or hold
down
for at least 2 seconds to go to the
standby mode.
2. Enter the phone number (include the area code if
needed).
3. Press
.
lf the phone is locked, enter the lock code.
Receiving Calls
Note
If the phone is restricted, you can only dial phone
numbers saved in the Emergency Numbers or your
Contacts. To turn off this function: Menu ->
Settings ->
Security -> Enter Lock
Code ->
Restrict Calls -> Off -> OK (The default
lock code is the last 4 digits of your phone number.)
4. Press
1. Press
twice to redial the last number you
dialed. The last 30 numbers are stored in the call
history list and you can also select one of these to
redial.
to end the call.
1. When the phone rings or vibrates, press
answer.
to
Note
If you press
or (the side keys) while the phone is
ringing, the ringing or vibration is muted for that call.
2. Press
twice to end the call.
G E T T I N G STA RT E D W I T H YO U R P H O N E
Call Failed - indicates the call did not go through.
Restricted - indicates outgoing calls are in
restricted mode.
Redialing Calls
19
UX390_Eng.qxd
7/7/06
6:00 PM
Page 20
QUICK ACCESS TO CONVENIENT FEATURES
Manner Mode
Mute Function
Sets the phone to vibrate instead of ring (
is
displayed). To quickly set Manner Mode press and
hold
. To return to Normal Mode, press and
hold
.
The Mute Function doesn’t transmit your voice to the
caller. To quickly activate Mute press Left Soft Key
[Mute], then to cancel press Left Soft Key
[Unmute].
Note
Lock Mode
Sets your phone to require your 4-digit password in
order to use the phone.
QU I C K AC C E S S TO C O N V E N I E N T
F E AT U R E S
20
Note
Until you change it, the lock code/password is the last 4
digits of your phone number.
The Mute Key is activated during a call.
Volume Quick Adjustment
Use the side keys to adjust the earpiece and ringer
volumes. The upper key increases the volume and the
lower key decreases the volume.
●
To quickly lock your phone press
for three
seconds. To cancel, press Right Soft Key [Unlock]
and enter the password.
Earpiece volume can be adjusted during a call.
Ringer volume can be adjusted during a call.
Note
Key Beep volume is adjusted through the Sounds Volume
(Menu -> 8 -> 1 -> 3 -> 3).
UX390_Eng.qxd
7/7/06
6:00 PM
Page 21
Call Waiting
Your cellular service may offer call waiting. While a
call is in progress, two beeps indicate another
incoming call. When call waiting is enabled, you may
put the active call on hold while you answer the
other incoming call. Check with your service provider
for information about this function.
1. Press
to receive a waiting call.
2. Press
again to switch between calls.
Dialing Single Digit Speed Dials (from 2 to 9)
Press and hold the Speed Dial number.
OR
Enter the speed dial number and press
.
Dialing Double Digit Speed Dials (from 10 to 99)
Press the first digit and then press and hold the
key of the last digit.
OR
Caller ID displays the phone number or name of the
incoming call. If the caller’s identity is stored in Contacts,
the name appears with the number. Check with your
service provider to ensure they offer this feature.
Speed Dialing
Speed dialing is a convenient feature that allows you
to make phone calls quickly and easily with a few
keystrokes. Your phone recalls the number from your
Contacts, displays it briefly, and then dials it. Speed
Dial Number 1 is assigned to Voice Mailbox by
default, but you can change it.
Enter the first and second digits and press
.
QU I C K AC C E S S TO C O N V E N I E N T
F E AT U R E S
Caller ID
21
UX390_Eng.qxd
7/7/06
6:00 PM
Page 22
ENTERING AND EDITING INFORMATION
Text Input
You can input and edit your Banner, Schedule,
Contacts, Notepad, and Messaging.
Note
When Key Tone is changed from Beep to English or
Spanish (Menu -> 8 -> 1 -> 2), the phone does not
announce numbers when 123 mode is in use.
Key Functions
Right Soft Key (Left Soft Key only in
Messaging):
Enter the text screen to create a text message.
Press to scroll through the following text input
modes: T9Word -> Abc -> 123 -> Symbols ->
Smileys.
ENTERING AND EDITING
I N FO R M AT I O N
22
Shift: Press to change case.
T9 text: T9Word -> T9WORD -> T9word
Abc text: Abc -> ABC -> abc
Next: In T9 mode, press to display other
matching words.
Space: Press to complete a word and insert a
space.
Text Input Modes
There are five modes for entering text, numbers,
special characters, and punctuation. In a text entry
field, pressing Right Soft Key
displays a pop-up
list of text modes.
* Left Soft Key ( ) in Messages menu.
T9Word (T9) Mode
Use to type text using one keystroke per letter. The
phone translates keystrokes into common words by using
the letters on each key and a compressed database.
Clear: Press to delete a single space or
character. Hold to delete the whole message.
Abc (Multi-tap) Mode
Use to add words to the T9 database.
Punctuation: In T9 mode, press to insert
punctuation in a word and complete a
sentence.
123 (Numbers) Mode
Use to type numbers using one keystroke per number.
UX390_Eng.qxd
7/7/06
6:00 PM
Page 23
Symbols Mode
Text Input Examples
Use to insert special characters or punctuation.
There are 39 special characters including “SP” which
inserts a space and “LF” which forces the text to the
next line.
Display the text modes and select a text mode:
Smileys Mode
Use to insert smiley graphics. There are 40 smiley
characters.
Changing Letter Case
Initial Cap (T9Word/ Abc)
Only the first letter is capitalized and subsequent
letters are lower case.
to
2. Press
to use.
to use the text input mode you want
3. Press
to select the text input mode.
Using Abc (Multi-tap) Text Input
1. Press Left Soft Key
to change to Abc mode.
2. Press
to change to ABC Caps Lock every
time for capital letters.
3. Press
.
LG is displayed.
Using T9 Mode Text Input
Caps Lock (T9WORD/ ABC)
All letters are capitalized.
Lower Case (T9word/ abc)
All letters are in lower case.
1. Press Left Soft Key
mode.
2. Press
3. Press
to change to T9Word
ENTERING AND EDITING
I N FO R M AT I O N
Using T9 and Abc text input modes you can set the
capitalization. Press
to reach the following:
1. In a text entry field, press Left Soft Key
display text modes.
.
to complete the word and add a space.
23
UX390_Eng.qxd
7/7/06
6:00 PM
Page 24
ENTERING AND EDITING INFORMATION
Adding Words to the T9 Database
4. Press
If a word is not in the T9 database, add it using Abc
(Multi-tap) mode text entry.
.
Call the office. is displayed.
Using the NEXT Key (In T9 Mode)
After you have finished entering a word, if the word
displayed is not the one you want, press
to
display additional choices of words from the
database.
1. Press
ENTERING AND EDITING
I N FO R M AT I O N
24
.
Good is displayed.
2. Press
.
The display gives you additional choices such as:
Home, Gone, Hood, etc.
1. Press Left Key
(or Right Soft Key) to change
to Abc (multi-tap) mode.
2. Press
.
Wait for a while for space between characters.
Bop is displayed.
3. Press Right Soft Key
(or Left Soft Key) to
change to T9 mode to add the word Bop to the
T9 database.
4. Press
to erase the existing word.
5. Press
cop is displayed.
6. Press
.
bop is displayed.
.
UX390_Eng.qxd
7/7/06
6:00 PM
Page 25
CONTACTS IN YOUR PHONE’S MEMORY
Contacts Entries
This allows you to have easy access to your most
frequently dialed phone numbers. You may store up
to 500 entries with up to 5 phone numbers each.
Each entry may be up to 22 characters. Each phone
number may be up to 48 digits.
5. Enter a name for the phone number (up to 22
characters) and press
.
A confirmation message is displayed briefly.
Note
To skip name entry, press
to go to the next step.
The Basics of Storing Contacts Entries
Note
1. From standby mode enter the phone number you
want to save (up to 48 digits).
If the information is complete, press
standby mode.
2. Press Right Soft Key [Options] and select [Save
to Contacts].
4. Use
press
to select New Name or Existing and
.
Note
Note
To further customize the Contact entry, press Left Soft
Key Done.
6. Continue saving the entry as a Speed Dial
selecting [Speed Dial].
C O N TAC T S I N YO U R
P H O N E ’ S M E M O RY
3. Use
to highlight a Label and press
.
Home/ Home2/ Office/ Office2/ Mobile/
Mobile2/ Pager/ Fax/ Fax2/ None
to return to the
Use Existing to add another phone number to a contact
already stored in memory.
25
UX390_Eng.qxd
7/7/06
6:00 PM
Page 26
CONTACTS IN YOUR PHONE’S MEMORY
Options to Customize Your Contacts
Once the basic phone number and name information
is stored in your Contacts, you can edit and
customize each entry.
Edit to access the Edit
C O N TAC T S I N YO U R
P H O N E ’ S M E M O RY
26
3. Use
Allows you to manage your Contacts entries by
organizing them into groups.
to
to select the Group, then press
to highlight Default Ringer, then press
4. Use
to select the Ringer Type, then press
.
5. Press Left Soft Key
Edit.
4. Use
Edit.
.
1. Press Right Soft Key
Contacts and use
highlight an entry, then press
.
to highlight No Group, then press
Contacts and use
1. Press Right Soft Key
to highlight an entry, then press
.
2. Press Left Soft Key
Adding or Changing the Group
3. Use
Done to save the change.
Allows you to identify who is calling, by setting
different ringers for different phone numbers in your
Contacts. It is automatically set to the default ringer
when the Contact is saved.
3. Use
to highlight the information you want to
customize, then press
.
2. Press Left Soft Key
5. Press Left Soft Key
Changing the Call Ringer
Contacts and use
1. Press Right Soft Key
to highlight the contact entry you want to edit,
then press
.
2. Press Left Soft Key
Contact screen.
No Group/ Family/ Friends/ Colleagues/
Business/ School
.
.
Done to save the change.
UX390_Eng.qxd
7/7/06
6:00 PM
Page 27
Changing the Message Ringer
3. Use
Allows you to identify who is sending you a message,
by setting different ringers for different phone
numbers in your Contacts. It is automatically set to
the default ringer when the Contact is saved.
4. Enter text, then press
Contacts and use
1. Press Right Soft Key
to highlight an entry, then press
.
2. Press Left Soft Key
to highlight Default Text Msg Ringer,
3. Use
then press
.
.
Done to save the change.
Adding or Changing the Memo
Allows you to enter up to 32 characters as a memo
to the Contact entry.
Done to save the change.
Adding or Changing the Picture ID
Allows the phone to display an image to identify the
caller.
1. Press Right Soft Key
Contacts and use
to highlight an entry, then press
.
2. Press Left Soft Key
to select the Ringer Type, then
5. Press Left Soft Key
5. Press Left Soft Key
.
.
3. Use
Edit.
to highlight Default, then press
.
4. Use
to select one of the images available,
then press
.
5. Press Left Soft Key
Select.
6. Press Left Soft Key
Done to save the change.
C O N TAC T S I N YO U R
P H O N E ’ S M E M O RY
4. Use
press
Edit.
to highlight Memo, then press
1. Press Right Soft Key
Contacts and use
to highlight an entry, then press
.
2. Press Left Soft Key
Edit.
27
UX390_Eng.qxd
7/7/06
6:00 PM
Page 28
CONTACTS IN YOUR PHONE’S MEMORY
Adding Speed Dial
3. Use
1. Press Right Soft Key
Contacts and use
to highlight an entry, then press
.
2. Press Left Soft Key
Edit.
to select Speed Dial, then press
4. Use
.
5. Enter a Speed Dial digit. Use the Keypad, then
press
, or use
to highlight the Speed Dial
digit, then press
.
C O N TAC T S I N YO U R
P H O N E ’ S M E M O RY
6. Press Left Soft Key
28
Done to save the change.
Editing Contacts Entries
Adding Another Phone Number
From standby mode
to highlight Existing, then press
.
5. Use
to highlight the existing Contact entry,
then press
.
A confirmation message is displayed.
Through Contacts
1. From standby mode press Right Soft Key
Contacts. Your Contacts display alphabetically.
2. Use
to highlight the Contact entry you want
to edit, then press
.
3. Press Left Soft Key
Edit.
to highlight Add Number, then press
4. Use
.
1. From standby mode enter the phone number you
want to save (up to 48 digits).
2. Press Right Soft Key
Save to Contacts.
.
Home/ Home2/ Office/ Office2/ Mobile/
Mobile2/ Pager/ Fax/ Fax2/ None
3. Use
to highlight the phone number you want
to set with a Speed Dial, then press
.
4. Press
to highlight a Label, then press
[Options] and select
5. Enter the number, then press
6. Use
.
to highlight a Label, then press
A confirmation message is displayed.
.
UX390_Eng.qxd
7/7/06
6:00 PM
Page 29
Default Numbers
3. Press Left Soft Key
The phone number saved when a Contact is created
is the Default Number. If more than one number is
saved in a Contact entry, another number can be
designated as the Default Number.
Changing the Default Number
4. Use
press
to highlight the phone number, then
twice.
5. Edit the phone number as necessary, then press
.
1. Press Right Soft Key
Contacts to display your
Contacts alphabetically.
6. Use
2. Use
to highlight the Contact entry you want
to edit, then press
.
Editing Stored Names
3. Press Left Soft Key
4. Use
to highlight the phone number you want
to set as the Default Number, then press Right
Soft Key
Options and
Set as Default #.
Editing Stored Phone Numbers
1. Press Right Soft Key Contacts to display your
Contacts alphabetically.
2. Use
to highlight the Contact entry you want
to edit, then press
.
to confirm the Label, then press
.
A confirmation message is displayed.
1. Press Right Soft Key
Contacts to display your
Contacts alphabetically.
2. Use
to highlight the Contact entry you want
to edit, then press
.
3. Press Left Soft Key
4. Use
Edit.
to highlight the name, then press
5. Edit the name as necessary, then press
6. Press Left Soft Key
.
C O N TAC T S I N YO U R
P H O N E ’ S M E M O RY
Edit.
Edit.
.
Done to save the change.
29
UX390_Eng.qxd
7/7/06
6:00 PM
Page 30
CONTACTS IN YOUR PHONE’S MEMORY
Editing Customized Options
3. Press Left Soft Key
Edit any of the Contacts options in the same manner
as when the Contact is created.
1. Press Right Soft Key
Contacts to display your
Contacts alphabetically.
2. Use
to highlight the Contact entry you want
to edit, then press
.
3. Press Left Soft Key
4. Use
to highlight the information you want to
customize, then press
.
C O N TAC T S I N YO U R
P H O N E ’ S M E M O RY
6. Press Left Soft Key
30
.
Done to save the change.
Deleting
Deleting a Phone Number from a Contact
1. Press Right Soft Key
Contacts to display your
Contacts alphabetically.
2. Use
press
to highlight the Contact entry, then
.
4. Use
to highlight the phone number to be
deleted.
Options.
5. Press Right Soft Key
6. Press
Erase Number.
7. Press
Erase Number.
A confirmation message is displayed.
Edit.
5. Edit the information as necessary, then press
Edit.
Deleting a Contact Entry
1. Press Right Soft Key
Contacts to display your
Contacts alphabetically.
2. Use
to highlight the Contact entry to be
deleted, then press
.
3. Press Left Soft Key
4. Press Right Soft Key
Edit.
Options.
5. Press
Erase Contact.
6. Press
Erase.
A confirmation message is displayed.
UX390_Eng.qxd
7/7/06
6:01 PM
Page 31
Additional Ways to Delete a Contact
Phone Numbers With Pauses
At any time when your Contacts are displayed, the
Options allows you to erase the
Right Soft Key
highlighted entry.
When you call automated systems such as voice mail
or credit billing numbers, you often have to enter a
series of numbers. Instead of entering these numbers
by hand, you can store the numbers in your Contacts
separated by special pause characters (P, T). There
are two different types of pauses you can use when
storing a number:
Deleting a Speed Dial
1. Press Right Soft Key
Contacts to display your
Contacts alphabetically.
2. Use
press
Hard Pause (P)
to highlight the Contact entry, then
.
3. Press Left Soft Key
to highlight the number, then press
5. Use
press
to highlight the Speed Dial entry, then
.
6. Use
to highlight the existing Speed Dial
location.
8. Press
Remove.
9. Press
Remove.
Options.
.
2-sec Pause (T)
The phone waits 2 seconds before sending the next
string of digits.
C O N TAC T S I N YO U R
P H O N E ’ S M E M O RY
4. Use
7. Press Right Soft Key
The phone stops dialing until you press Left Soft Key
Release to advance to the next number.
Edit.
A confirmation message is displayed.
31
UX390_Eng.qxd
7/7/06
6:01 PM
Page 32
CONTACTS IN YOUR PHONE’S MEMORY
Storing a Number with Pauses
1. Press Left Soft Key
Adding a Pause to an Existing Number
Menu.
2. Press
Contacts.
3. Press
New Number.
1. Press Right Soft Key
Contacts to display your
Contacts alphabetically.
2. Use
to highlight the Contact entry to edit,
then press
.
4. Enter the number.
5. Press Right Soft Key
3. Press Left Soft Key
Pause.
6. Use
to select pause type, then press
Hard pause/ 2-sec pause
C O N TAC T S I N YO U R
P H O N E ’ S M E M O RY
32
.
8. Use
to select a Label, then press
9. Enter a name (up to 22 characters).
A confirmation message is displayed.
4. Use
to highlight the number then press
2 times.
5. Press Right Soft Key
7. Enter additional number(s) (e.g., pin number or
credit card number), then press
.
.
Edit.
6. Press
Pause.
Hard pause or
2-sec pause.
7. Enter additional number(s), then press
8. Use
to confirm the Label, then press
A confirmation message is displayed.
.
.
UX390_Eng.qxd
7/7/06
6:01 PM
Page 33
Searching Your Phone’s Memory
Searching by Letter
The UX390 phone is capable of performing a dynamic
contents search of the phone's memory. A dynamic
search compares entered letters or numbers against
the entries in your Contacts. A matching list is
displayed in descending order. You can then select a
number from the list to call or edit. There are several
ways to search:
1. Press Right Soft Key
Contacts to display your
Contacts alphabetically.
●
Scrolling Alphabetically
1. Press Right Soft Key
Contacts.
●
Searching by Letter
2. Press Right Soft Key
Options.
●
Searching by Options
3. Select the search criteria (use
then press
or press the corresponding number on the
keypad):
Searching Options
1. Press Right Soft Key
Contacts to display your
Contacts alphabetically.
New Number
2. Use
New E-mail
to scroll through the list.
,
Find Name: Enter the character(s) to search for
(such as the first letter(s) of the name).
C O N TAC T S I N YO U R
P H O N E ’ S M E M O RY
Scrolling Through Your Contacts
2. Press (or press repeatedly) the key on the keypad
that corresponds with the search letter.
Find Number: Enter the number(s) to search.
Find Speed Dial: Enter the speed dial
number(s) to search.
33
UX390_Eng.qxd
7/7/06
6:01 PM
Page 34
CONTACTS IN YOUR PHONE’S MEMORY
Find Group: Use
to highlight the group
to search for, then press
.
Making a Call From Your Phone’s
Memory
Find E-mail: Enter the e-mail address to search.
Once you have stored phone numbers in your
Contacts, you can place calls to those numbers
quickly and easily.
Send Text Msg: Send a text message to the
selected contact.
●
By pressing
after searching for a phone
number in Contacts or Recent Calls and
highlighting it.
●
By using Speed Dialing
Send Photo Msg: Send a photo message to
the selected contact.
Erase: Erase the selected entry in your
Contacts.
C O N TAC T S I N YO U R
P H O N E ’ S M E M O RY
Copy to ST: Copy the selected contact entry
to SpeedTalkSM. Enter extra information to
Group, Ringer, Text Msg Ringer and Picture.
Use Left Soft Key
Edit to edit the
information.
4. When the list of matches is displayed, use
highlight a matched entry.
5. Press
to see more information or press
to place a call.
34
From Contacts
to
1. Press Right Soft Key
Contacts to display your
Contacts alphabetically.
2. Use
.
to select the Contact entry, then press
3. Use
to select the phone number.
4. Press
to place the call.
UX390_Eng.qxd
7/7/06
From Recent Calls (
1. Press Left Soft Key
Page 35
as a hot key)
Menu.
Recent Calls.
2. Press
3. Use
press
6:01 PM
to select the type of recent call, then
.
Dialed Calls/ Received Calls/ Missed Calls
Prepending a Stored Number
Prepend can be used if you are out of your home
system area and need to add the area code to an
existing number in your phone's memory. When a
Contacts entry or message callback number is
displayed, you can add to the beginning of the
original number. However, you cannot edit the
original number.
4. Use
to select the phone number.
1. Recall a number in your Recent Calls (Dialed,
Received, or Missed).
5. Press
to place the call.
2. Press Right Soft Key
Options.
3. Press
For a single-digit Speed Dial, press and hold the digit
or press the digit, then press
. For a double-digit
Speed Dial, press the first digit and hold the second
digit or press the first and second digits, then press
.
4. Enter the prepend digits to the phone number.
5. Press
Prepend.
to place the call.
C O N TAC T S I N YO U R
P H O N E ’ S M E M O RY
Speed Dialing
35
UX390_Eng.qxd
7/7/06
6:01 PM
Page 36
CONTACTS
Contacts
1. List Contacts
The Contacts Menu allows you to store names,
phone numbers and other information in your
phone’s memory.
1. Press
Allows you to view your Contacts list.
,
,
.
2. Options from here:
Access and Options
1. Press Left Soft Key
2. Press
●
Press
to scroll through your Contacts
alphabetically.
●
Press Right Soft Key
of the following:
Menu.
Contacts.
3. Select a sub-menu.
New Number/ New E-mail/ Find Name/ Find
Number/ Find Speed Dial/ Find Group/ Find
E-mail/ Send Text Msg/ Send Photo Msg/
Erase/ Copy to ST
1. List Contacts
2. New Number
C O N TAC T S
36
3. New E-mail
4. Groups
5. Speed Dials
6. My Contact Info
Options to select one
●
Press Left Soft Key
network.
Alert available at 1X
UX390_Eng.qxd
7/7/06
6:01 PM
Page 37
2. New Number
1. Press
Allows you to add a new number to your Contacts.
2. Enter the e-mail address, then press
,
,
.
Note
3. Enter the name, then press
Using this sub-menu, the number is saved as a new
Contact. To save the number into an existing Contact, edit
the Contact entry.
4. Continue saving the entry as necessary.
1. Press
,
,
.
4. Groups
.
2. Enter the number, then press
Allows you to view your grouped Contacts, add a new
group, change the name of a group, or erase a whole
group.
.
3. Select the Label you want and press
4. Enter the name, then press
.
.
.
3. New E-mail
Allows you to save a new e-mail address.
Note
Using this sub-menu, the e-mail is saved as a new Contact.
To save the e-mail into an existing Contact, edit the
Contact entry.
,
,
.
2. Options from here:
● Use
press
to highlight a group to view, then
.
● Press
Left Soft Key
Add to add a new group
to the list (Group Name and Group Icon).
C O N TAC T S
5. Continue saving the entry as necessary.
1. Press
● Use
to highlight a group, then press Right
Soft Key Options to change the name of the
group or delete the group.
37
UX390_Eng.qxd
7/7/06
6:01 PM
Page 38
CONTACTS
5. Speed Dials
6. My Contact Info
Allows you to view your Speed Dials list, designate
new Speed Dials, or remove Speed Dial designations
entered in your Contacts.
Allows you to enter your own virtual business card to
be used in text messages.
1. Press
,
,
1. Press
.
2. Use
to highlight the Speed Dial position (or
enter the Speed Dial digit), then press
.
3. Use
.
2. Use
to select the feature you want to edit,
then press
.
3. Edit the information as necessary.
Note
to highlight the number, then press
A confirmation message is displayed.
C O N TAC T S
38
,
to highlight the Contact, then press
.
4. Use
,
.
You cannot edit phone number, but you can add an
additional phone number.
UX390_Eng.qxd
7/7/06
6:01 PM
Page 39
RECENT CALLS
1. Dialed Calls
Recent Calls
2. Received Calls
The Recent Calls Menu is a list of the last phone
numbers or Contact entries for calls you placed,
accepted, or missed. It is continually updated as new
numbers are added to the beginning of the list and
the oldest entries are removed from the bottom of
the list.
3. Missed Calls
4. Erase Calls
5. Call Timer
6. KB Counter
Note
To view a quick list of all your recent calls, press
standby mode.
Access and Options
1. Press Left Soft Key
1. Dialed Calls
Menu.
Recent Calls.
3. Select a sub-menu.
Allows you to view the list of outgoing calls; up to 30
entries.
1. Press
2. Use
,
,
.
to highlight an entry.
●
Press
to view the entry.
●
Press
to place a call to the number.
RECENT CALLS
2. Press
from
39
UX390_Eng.qxd
7/7/06
6:01 PM
Page 40
RECENT CALLS
●
●
Press Right Soft Key
Options (for call lists) to
select Save to Contacts/ Save to ST/ Send Text
Msg/ Send Photo Msg/ Prepend/ Erase/ Erase All
Press
to return to the standby mode.
2. Received Calls
Allows you to view the list of incoming calls; up to 30
entries.
1. Press
,
2. Use
,
.
to highlight an entry.
RECENT CALLS
40
Allows you to view the list of missed calls; up to 30
entries.
2. Use
,
,
Allows you to erase selected call list(s).
1. Press
,
2. Use
press
,
.
to highlight the list of calls to erase, then
.
Dialed Calls/ Received Calls/ Missed Calls/ All
Calls
Erase or
3. Press
Cancel.
5. Call Timer
Allows you to view the duration of selected calls.
3. Missed Calls
1. Press
4. Erase Calls
.
to highlight an entry.
1. Press
2. Use
,
,
.
to highlight a call list, then press
Last Call/ Home Calls/ Roam Calls/ All Calls
.
UX390_Eng.qxd
7/7/06
6:01 PM
Page 41
6. KB Counter
Allows you to view the list of received and
transmitted data calls.
1. Press
2. Use
,
,
.
to highlight a data call list, then press
.
Received/ Transmitted/ Total
RECENT CALLS
41
UX390_Eng.qxd
7/7/06
6:01 PM
Page 42
MESSAGES
Messages
Text messages, pages, and the voice mail box become
available as soon as the phone is powered on.
Access and Options
●
1. Press Left Soft Key
Menu.
Messages.
2. Press
3. Select a sub-menu.
Check types of messages by pressing the message
key
.
●
Make a call to the callback number by pressing
during an Inbox message check.
●
Read and edit messages saved in the outbox after
transmission and resend them.
1. Voice Mail: Shows the number
of messages in voice mail box.
2. New Text Msg: Sends a
message.
3. New Photo Msg: Sends an
MMS message.
M E S SAG E S
4. Inbox: Shows the list of
received messages.
5. Outbox: Shows the list of sent
messages.
6. Saved: Shows the list of saved
and draft messages.
7. Msg Settings: Selects alert
type for new messages.
8. Erase All: Deletes all stored
messages.
42
The phone can store up to 116 messages (1 voice
message, 50 inbox text messages, 50 outbox text
messages, 15 saved text messages). The UX390
supports up to 160 characters per message including
header information. The information stored in the
message is determined by phone mode and service
capability. Other limits to available characters per
message may exist. Please check with your service
provider for system features and capabilities.
UX390_Eng.qxd
7/7/06
6:01 PM
Page 43
New Message Alert
1. Voice Mail
There are three ways your phone alerts you to new
messages.
1. The phone displays a message on the screen.
Allows you to view new voice messages recorded in
the voice mail box. Your phone will alert you when
you receive a new voice message.
2. One of eight ring types is heard, if selected.
Checking Your Voice Mail Box
3. The message icon (
) is displayed on the
screen. In the case of an urgent message, the icon
will flash and Urgent message is displayed.
Note
If you receive the same message twice, your phone deletes
the older one and the new one is stored as a Duplicate.
1. Press
,
,
.
2. Options from here:
●
Press Left Soft Key
Clear to delete information,
then select Clear Count.
●
Press
to listen to the message(s).
M E S SAG E S
43
UX390_Eng.qxd
7/7/06
6:01 PM
Page 44
MESSAGES
2. New Text Msg
Customizing the Text Message Using Options
Allows you to send text messages, EMS messages,
pages, and e-mail transmissions. Each message has a
destination (Address 1) and information (Message).
These are dependent upon the type of message you
want to send.
1. Create a new message.
Send
Sends the message.
The Basics of Sending a Text Message
Priority
Gives priority to the message.
Normal/ Urgent
Callback #
Inserts a pre-programmed
callback number with your
message.
On/ Off/ Edit
Delivery Notice
Informs you that the message
has been successfully
delivered to the recipient.
Enhanced/ Normal
Save Message
Saves the message into the
saved folder.
Erase Field
Deletes address or contents
of message field.
1. Press
,
,
3. Enter the recipient's address, then press
.
.
to access the message screen.
M E S SAG E S
5. Type your message (text or e-mail), then press
6. Press Left Soft Key
.
Send.
A confirmation message is displayed.
Options.
3. Select the option(s) to customize.
.
2. With the highlight on Address 1, press
4. Press
2. Press Right Soft Key
4. Complete and send the message.
44
UX390_Eng.qxd
7/7/06
6:01 PM
Page 45
Using Contacts to Send a Text Message
Text Options
You can designate an entry saved in your Contacts as
Address 1 instead of manually entering the
destination.
While you are composing the text of a message you
can insert customized text.
1. Press
,
,
2. Press Left Soft Key
.
1. Create a new message.
2. Use
Contacts.
3. Select Contacts/ Recent Calls/ Recent
.
Addresses. then press
4. Use
to highlight the Contact entry containing
the destination, then press
.
Note
The Address 1 feature allows multi-sending of up to 10
addresses.
3. Press Right Soft Key
Options.
4. Select the option(s) to customize.
Insert Quick-Text
Inserts 11 predefined phrases.
Save Quick-Text
Allows you to define phrases
to insert as Insert Quick Text.
Insert Signature
Inserts a predefined signature.
Custom/ My Contact Info
5. Complete and send or save the message.
M E S SAG E S
5. Use
to highlight the SMS phone number or
e-mail address, then press
.
to highlight Message, and then press
.
6. Complete the message as necessary.
45
UX390_Eng.qxd
7/7/06
6:01 PM
Page 46
MESSAGES
Message Icon Reference
3. New Photo Msg
Sent: Messages sent in Short Message
Center(SMC) have been transmitted.
Allows you send messages with Text, Picture and
Sound.
Fail: Indicates a failed message transmission.
1. Press
Delivery: Message has been delivered.
2. With the highlight on [Address 1], press
Lock: Indicates that messages are locked.
Multi-sending: Indicates more than one
designated recipient.
M E S SAG E S
Pending: Transmission is unavailable in a no
service area or in an analog service area.
Messages are pending transmission. Pending
messages are transmitted automatically
when digital mode becomes available.
,
,
.
.
You can search the destination by scrolling your
Contacts, Recent Call and Online Album after
pressing Left Soft Key [Contacts].
3. Enter the recipient's address, then press
4. With the highlight on [Subject], press
5. Enter the Subject, then press
6. Press
.
.
.
to access the message screen.
7. Type your message (text or e-mail), then press
.
8. With the highlight on [Picture], press
.
9. Use
to highlight a picture, then press Left
Soft Key Select.
10. With the highlight on [Sound], press
46
.
UX390_Eng.qxd
11. Use
7/7/06
6:01 PM
Page 47
to highlight a sound, then press
.
Or you can record your voice memo by pressing Left
Soft Key [Record] and send it with your message.
12. Press Right Soft Key
Options.
13. Select the option(s) to customize.
Preview
Send
Priority
14. Complete and send the message.
The phone alerts you in 3 ways when you receive a
new message by:
●
Displaying a message notification on the screen.
●
Sounding a beep, vibrating or sound, if set.
●
Displaying the message icon
when the message is urgent).
(It blinks
Received text messages, page messages, photo
messages and e-mail lists may be searched and the
contents viewed. Received messages are displayed
from newest to oldest.
Out of Memory Warning
If the memory is full, no more messages can be
received until enough memory space becomes
available. When there is no space to save SMS
messages, [Inbox] is 100% full. Unable to rcv.
Please erase messages. is displayed. For MMS
messages, Picture Msgs full. Delete messages. For
MMS notifications, Picture Msg Noti full. Delete
msgs. is displayed and new messages are not
accepted.
M E S SAG E S
Shows your message before sending.
Sends the message.
Gives priority to the message.
Normal/ Urgent
Delivery Notice Informs you that the message has
been successfully delivered to the
recipient.
Enhanced/ Normal
Save Message Saves the message into the saved
folder.
4. Inbox
47
UX390_Eng.qxd
7/7/06
6:01 PM
Page 48
MESSAGES
Viewing Your Inbox
Options from here:
Up to 50 received messages can be stored in the
Inbox.
Reply w Copy
Replies to the SMS with the
original message attached.
1. Press
Forward
Forwards a received message to
other destination address(es).
Erase
Deletes the selected message
from the Inbox.
Save Address
Stores the callback number, email address, and numbers in
user data included in the
received message into your
Contacts.
Save Quick-Text
Saves the message into the
Quick-Text list.
Save Message
Saves Inbox message into the
Saved Folder.
Lock/UnLock
Locks or unlocks the selected
message. Locked messages can
not be deleted by the Erase
Inbox or Erase All functions.
Message Info
Shows the message type
priority and status.
2. Use
,
,
.
to highlight an Inbox message.
●
Left Soft Key
Reply complying with the
kinds of messages (Text/Photo Messaging).
●
Right Soft Key
Options.
M E S SAG E S
Erase
Deletes the selected message
from the Inbox.
Lock/UnLock
Locks a message so that it is
not erased if the Erase Inbox
or Erase All feature are used.
3. Use
press
to highlight an Inbox message, then
.
4. While viewing the selected message, press Left
Options.
Soft Key Reply or Right Soft Key
48
UX390_Eng.qxd
7/7/06
6:01 PM
Page 49
5. Outbox
Play
Up to 50 sent messages or photo messages can be
stored in the Outbox. View lists and contents of sent
messages and verify whether the transmission was
successful or not.
Play Again
Send To
Erase
1. Press
Save Picture
2. Use
,
,
.
to highlight an Outbox message.
●
Press Left Soft Key
●
Press Right Soft Key
Resend.
Save Address
Stores the callback number, email address, and numbers in
user data included in the
received message into your
Contacts.
Lock/Unlock
Locks a message so that it is
not erased if the Erase
Outbox or Erase All feature is
used.
Save Message
Saves Outbox message into
the Saved Folder.
Save Quick-Text
Saves the message into the
Quick-Text list.
3. Use
to highlight an Outbox message, then
press
. While viewing the selected Outbox
Resend to or
message, press Left Soft Key
press Right Soft Key Options.
Lock/Unlock
Locks or unlocks the selected
message. Locked messages
can not be deleted by the
Erase Outbox and Erase All
functions.
Message Info
Shows the message type
priority and status.
M E S SAG E S
Deletes the selected message
from the Outbox.
Deletes the selected message.
Save Sound
Options.
Erase
Replies to the text message
with original message attached.
49
UX390_Eng.qxd
7/7/06
6:01 PM
Page 50
MESSAGES
Message Settings Sub-Menu Descriptions
6. Saved
Displays saved messages and draft messages.
7.1 Auto Save (Auto Save/ Prompt/ Do Not Save)
1. Press
Allows you to automatically save sent messages in
your Outbox. You can choose Auto Save, Prompt, or
Do Not Save.
,
2. Use
,
.
to highlight a Saved message.
●
Press Left Soft Key
●
Press Right Soft Key
Resume/Resend.
Options.
Erase
Deletes the selected message.
Lock/Unlock
Locks a message so that it is
not erased if the Erase Saved
or Erase All feature is used.
7.2 Auto Erase (On/ Off)
With this feature on, read messages(except locked
messages) are automatically deleted when you
exceed the storage limit.
7.3 Photo-Auto Receive (On/ Off)
Allows you to set photos to be received automatically.
M E S SAG E S
7. Msg Settings
Allows you to configure 9 settings for received
messages.
1. Press
2. Use
press
50
,
,
.
to highlight one of the settings and
to select it.
7.4 Callback #
Allows you to automatically send a designated
callback number when you send a message. Allows
you to manually enter the number.
7.5 Signature (None/ Custom)
Allows you designate a signature to automatically
send with your messages. You can create a custom
signature line.
UX390_Eng.qxd
7/7/06
6:01 PM
Page 51
7.6 Voice Mail #
8. Erase All
Allows you to manually enter the number for Voice
Mail Service. This number should be only used when
a VMS access number is not provided from the
network.
Allows you to erase all the messages stored in your
Inbox, Outbox, or Saved messages folders. You can
also erase all messages at the same time.
7.7 Text Auto View (On/ Off)
Allows you to directly display the content when
receiving a message.
1. Press
7.9 Insert Quick-Text
7.0 Text Auto Play (On/ Off)
.
●
Press
Outbox to erase all messages
stored in the Outbox.
●
Press
Saved to erase all messages stored
in the Saved messages folder.
●
Press
All to erase all messages stored in
the Inbox, Outbox, and Saved messages folder.
2. Press
Erase All.
A confirmation message is displayed.
M E S SAG E S
Allows you to display, edit, and add text phrases.
These text strings allow you to reduce manual text
input into messages.
,
Press
Inbox to erase all messages stored
in the Inbox.
7.8 Entry Mode (T9Word/ Abc/ 123)
Allows you to select the default input method.
,
●
With this feature on, the display automatically scrolls
down while viewing messages.
51
UX390_Eng.qxd
7/7/06
6:01 PM
Page 52
SpeedTalk SM
SpeedTalkSM
Access and Options
SpeedTalkSM is an walkie-talkie-style service that
makes it easy for you to get in touch with your
spouse, friends or group of people instantly, with just
a touch of a button on the left top of your phone.
1. Press Left Soft Key
SpeedTalk SM (ST) allows you to make a barge call or
send an Alert message. With a barge call the
receiving party does not have the option to ignore
the call. When an Alert message is sent to the
receiving party, the receiving party has the option to
place a ST call or ignore the alert.
2. Press
Menu.
SpeedTalk.
3. Select a sub-menu option.
1. ST Contacts
2. New ST Contact
3. New ST Group
4. Recent ST
5. ST Settings
S p e e d T a l k SM
52
UX390_Eng.qxd
7/7/06
6:01 PM
Page 53
Call from SpeedTalkSM Contact List (Barge)
Call from SpeedTalkSM Contact List (Alert)
1. From Standby mode, press and hold ST key to
access your ST Contact List.
1. From Standby mode press and hold the ST key to
access your ST Contact List.
2. Use
to highlight the ST Contact entry you
wish to call.
2. Use
to highlight the ST Contact entry you
wish to alert.
3. Press and hold the ST key.
3. Press Left Soft Key
●
Sender hears ST talk tone and can begin
speaking.
●
Receiver has the options to answer or ignore
using
.
4. Press and hold ST Key to send alert.
●
●
Receiver hears incoming barge tone.
Receiver hears sender’s voice followed by the
floor available tone.
●
Sender’s device displays connected screen.
6. Press and hold ST key to speak.
hears alerting tone and receives alert
message.
4. If receiver accepts the alert and places a ST call to
the sender,
●
Sender hears incoming barge tone.
●
Sender hears receiver’s voice followed by the
floor available tone.
●
Receiver’s device displays connected screen.
5. Press and hold ST key to speak.
S p e e d T a l k SM
5. Release ST Key after speaking.
Alert.
● Receiver
6. Release ST key to listen.
7. Release ST key to listen.
53
UX390_Eng.qxd
7/7/06
6:01 PM
Page 54
SpeedTalkSM
Call from SpeedTalkSM Contact List
(Group)
Allows you to make a multiparty call with all or
selected members of a ST Group.
1. Press and hold ST key to access ST Contacts list.
2. Use
to highlight the ST Group.
3. To make a ST Group call to all members in the
Group,
All members of Group hear sender’s voice
followed by the floor available tone.
●
Sender’s device displays connected screen.
Note
A group call is only a Barge and a user cannot alert a
group.
Call from Keypad (Barge)
- Press and hold ST Key.
1. From Idle Screen, enter the number.
To make a ST Group call to selected members of
the Group,
2. Press and hold ST Key.
S p e e d T a l k SM
- Use
to highlight the ST group and Press
.
- Select the Contacts you wish to include in ST
group call.
●
Sender hears ST talk tone and can begin
speaking.
4. Release ST key.
●
54
●
All members of Group hear incoming barge
tone.
●
Sender hears ST talk tone and can begin
speaking.
●
If the phone number is in the ST contact list,
screen shows the Contact name.
3. Release ST key.
●
Receiver hears incoming barge tone.
●
Receiver hears sender’s voice followed by the
floor available tone.
●
Sender’s device displays connected screen.
UX390_Eng.qxd
7/7/06
6:01 PM
Page 55
Incoming SpeedTalkSM (Barge)
Incoming SpeedTalkSM (Alert)
1. Listening screen is shown with the phone number.
If the number is stored in ST Contact List, the
sender’s name is shown.
1. Buddy Alert Message appears.
2. Press and hold ST key.
● Sender hears ST talk tone and can begin
speaking.
3. Release ST key.
●
Receiver hears incoming barge tone.
●
Receiver hears callers voice followed by the
floor available tone.
●
Sender’s device displays connected screen.
All Incoming ST calls come through the Speaker Phone.
3. If Answer is selected, ‘Push ST button to make ST
call to (Contact name)’ is shown.
4. Press and hold ST key to reply.
●
Sender hears ST talk tone and can begin
speaking.
5. Release ST key.
●
Receiver hears incoming barge tone.
●
Receiver hears caller's voice followed by the
floor available tone.
●
Sender’s device displays connected screen.
S p e e d T a l k SM
Note
2. Select Answer or Ignore.
55
UX390_Eng.qxd
7/7/06
6:01 PM
Page 56
SpeedTalkSM
Incoming SpeedTalkSM (Group)
1. SpeedTalkSM Contacts
1. The name of the Group will be displayed. Only
one person can speak at a time.
Allows you to view your ST Contacts list. ST
Contacts consists of individuals and Groups. For an
individual, a single phone number is saved. For a
Group, multiple individuals can be saved. An
individual can be saved in multiple ST Groups.
2. If floor is available, press and hold ST key, speak
after the talk tone is heard.
1. Press
Making a SpeedTalkSM call when the
phone is closed
S p e e d T a l k SM
56
When the phone is closed, you can place a ST call by
holding down the ST key. Your Recent ST Call history
will come up on the outer LCD screen. You may scroll
through the list using the side arrow keys. To place a
call, highlight a number then press the ST key. When
the call is connected, you will see an icon in the
status bar of your outer LCD screen exterior using
SpeedTalkSM Menu.
,
,
.
2. Press
to scroll through your ST Contacts
alphabetically.
3. Press Right Soft Key
the following:
Options to select one of
When highlighted entry is Individual
Find Name/ Find Number/ Find Group/ New
Contact/ New Group/ Erase/ Copy to Contacts
When highlighted entry is Group
Find Name/ Find Number/ Find Group/ New
Contact/ New Group/ Erase
UX390_Eng.qxd
7/7/06
6:01 PM
Page 57
2. New SpeedTalkSM Contact
Allows you to add a new individual to ST Contacts.
1. Press
,
,
.
2. Enter the number, then press
3. Enter the name, then press
6. To add a contact to the group, press Right Soft
Key
for options, then
to add buddy.
4. Recent SpeedTalkSM
.
Allows you to view the list of the Recent ST calls (up
to 10).
.
4. Phone will automatically connect to server and
update Contact information.
A confirmation message is displayed briefly.
1. Press
,
,
.
2. Icons show you whether the ST call was initiated
or received and individual or group.
5. SpeedTalkSM Settings
3. New SpeedTalkSM Group
Allows you to adjust your ST Settings.
1. Press
5.1 SpeedTalkSM On/Off
,
,
.
2. Enter the ST Group name, then press
.
A confirmation message is displayed briefly.
3. Press Left Soft Key
to Save Group.
4. Phone will automatically connect to server and
update Contact information.
5. Once saved in ST Contact list, select the newly
created group with
.
Allows you to set your ST availability.
On allows both incoming and outgoing ST calls.
You can use all ST functions and receive all incoming
ST calls and alerts.
shows on your idle screen.
S p e e d T a l k SM
Allows you to add a new ST group.
Off blocks all incoming ST calls.
When other parties try to place a ST call to your
number, ‘(Contact name) unavailable’ message will
appear on their screen.
57
UX390_Eng.qxd
7/7/06
6:01 PM
Page 58
SpeedTalkSM
Also, the unavailable icon will appear next to your
name in their contact list.
shows on your idle screen.
1. Press
,
,
,
.
2. Set On/ Off with
1. Press
,
,
,
.
Note
Allows you to manually set you Speakerphone on/off
(performs the same function as the Speakerphone
key on the side of the phone).
You can adjust the alert tone volume through the master
volume (Settings -> Sounds -> Volume -> Ringer).
,
,
2. Set On/ Off with
S p e e d T a l k SM
58
.
Allows you to set the alert tone of SpeedTalkSM.
Other than the default alert tone, a variety of
melodies are available.
5.2 Speaker On/Off
1. Press
adjustable.
m) Alert
then press
5.3 SpeedTalkSM Alert Tone
,
.
then press
.
UX390_Eng.qxd
7/7/06
6:01 PM
Page 59
easyedge SM
easyedgeSM
easyedgeSM allows you to do more than just talk on
your phone. easyedge is service that allows you to
download and use applications on your phone. With
easyedge, it is quick and easy to personalize your
phone to your lifestyle and tastes. Just download the
applications that appeal to you. With a wide range of
products available, from ringtones to games to
products tools, you can be assured that you can find
something useful, practical, or down right
entertaining. There are new applications constantly
being created for your use.
Downloading Applications
Incoming Calls
Access and Options
1. Press Left Soft Key
2. Press
Menu.
easyedge.
3. Options from here:
1. easyedge
2. Help
e asy e d g e S M
You can download applications and use easyedge
wherever service is available, see map for details.
When using applications, an incoming call will
automatically pause the application and allow you to
answer the call. When you complete your call, you
can resume using the application.
While downloading an application, incoming calls will
automatically be sent to your voice mail, if available.
If you do not have voice mail, downloading will not be
interrupted by an incoming call, and the caller will
receive a busy signal.
59
UX390_Eng.qxd
7/7/06
6:01 PM
Page 60
easyedgeSM
1. easyedge
Managing Your easyedge Applications
Allows you to download selected applications while
displaying the entire application list retrieved from
the easyedge server connection.
Add new applications and remove old ones at any
time.
1. Press
,
2. Press
,
.
By deleting an application you will restore memory
capacity to the phone. To restore an application once
it has been removed will require that you purchase
from the easyedgeSM shop.
.
Shortcut
Pressing the right arrow key
Removing easyedge Applications
will start easyedge.
1. Access easyedge.
Note
2. Use
Contact U.S. Cellular© to add this service to your account.
3. Use
to select Settings, then press
.
to highlight Manage Apps, then press
.
e asy e d g e S M
2. Help
Gives you information about the easyedge selection
key.
1. Press
2. Press
60
,
,
.
.
4. Use
to highlight the application to be
deleted, then press
.
5. Use
to select Remove, then press
.
UX390_Eng.qxd
7/7/06
6:01 PM
Page 61
MEDIA
1. Images
Media
This menu allows you to use a wide variety of images,
sounds, and more.
Allows you to choose downloaded images to your
phone to display as the background image displayed
on the phone.
Access and Options
1. Press
1. Press Left Soft Key
2. Press
Menu.
Media.
3. Select a sub-menu.
1. Images
2. Sounds
2. Use
,
,
.
to highlight your selection, then press
Set As to select.
and press Left Soft Key
2. Sounds
Allows you to choose the downloaded ring tones
heard for incoming calls.
1. Press
,
,
.
MEDIA
2. Use
to highlight your selection, then press
Set As to select.
Left Soft Key
61
UX390_Eng.qxd
7/7/06
6:01 PM
Page 62
TOOLS
1. Schedule
Tools
Your phone tools include a Schedule, Alarm Clock,
Voice Memo, My Shortcut, Notepad, Ez Tip Calc,
Calculator, and World Clock.
Allows you to conveniently keep and access your
agenda(s). Simply store your appointments and your
phone will alert you with a reminder of your
appointment.
Access and Options
1. Press
1. Press Left Soft Key
2. Press
Menu.
2. Use
Tools.
1. Schedule
TO O L S
3. Voice Memo
4. My Shortcut
,
to highlight the scheduled day.
Add.
3. Press Left Soft Key
4. Enter your schedule information including:
●
Date
●
Time
●
Contents
●
Voice
●
Recurring event
7. Calculator
●
When to ring the alarm reminder
8. World Clock
●
Which ring alarm to sound
5. Notepad
6. Ez Tip Calc
5. Press Left Soft Key
62
.
Moves cursor to the left.
Moves cursor to the right.
Moves to the previous week.
Moves to the next week.
3. Select a sub-menu.
2. Alarm Clock
,
Save.
UX390_Eng.qxd
7/7/06
6:01 PM
Page 63
3. Use
Note
Schedule will not alert you during a call or during SMS
transmitting. It will sound the reminder after you exit a
call.
2. Alarm Clock
Allows you to set one of four alarms. The current
time is displayed at the top of the screen when you
select an alarm to set. At the alarm time, Alarm 1 (or
2 or 3, as applicable) will be displayed on the LCD
screen and the alarm will sound.
1. Press
,
,
.
2. Select the alarm you want to edit.
Alarm 3/
4. Set the time for alarm and press
.
5. Use
press
to highlight Once (recurring setting) and
.
6. Press
press
.
to select one of the following and
Once/ Daily/ Mon - Fri/ Weekends
7. Use
press
to highlight Ring (ring type setting) and
.
8. Use
to select one of the available alarm ring
types and press
.
9. Press Left Soft Key
Save.
TO O L S
Alarm 1/
Alarm 2/
Quick Alarm
to highlight the alarm time then press
.
Note
In Quick Alarm option, you can select 10 min later/ 30
min later/ 1 hour later/ 3 hours later.
For example you can take a nap in the afternoon with the
quick alarm set to 30 min later. It will allow you to wake
up on time.
63
UX390_Eng.qxd
7/7/06
6:01 PM
Page 64
TOOLS
3. Voice Memo
4. My Shortcut
Allows you to add, listen to, and erase short verbal
reminders.
Allows you to set a shortcut to Recent Calls,
Contacts, Tools, or Settings using the Up Navigation
key.
1. Press
,
,
.
2. Press Left Soft Key
memo.
New to record a new voice
3. Talk into the microphone, then press Left Soft Key
Done or
.
4. While the highlight is still on the recording, press
Right Soft Key
Options to access the
following:
TO O L S
●
Edit Title
●
Memory Info
●
Set As
●
Erase
●
Erase All
,
,
.
An explanation message is displayed.
2. Press
to continue.
3. Select the shortcut you want to set (press the
corresponding number or highlight it and press
).
5. Notepad
Allows you to add, read, edit, and erase notes to
yourself.
1. Press
,
,
.
Add to write a new note.
To Playback a Voice Memo
2. Press Left Soft Key
1. Access Voice Memo, highlight the Voice Memo you
want to hear, then press
.
3. Type the note, then press
2. Press Left Soft Key
64
1. Press
Play.
.
A confirmation message displays briefly, then
displays your list of notes.
UX390_Eng.qxd
7/7/06
6:01 PM
Page 65
Viewing a Notepad Entry
7. Calculator
1. Access Notepad and highlight the entry.
Allows you to perform simple mathematical
calculations. You can enter numbers up to the fifth
decimal place.
2. To erase, press Right Soft Key
●
Erase
●
Erase All
Options.
1. Press
,
,
.
2. Enter data.
To edit highlight the entry, then press
Edit.
press Left Soft Key
and
Use keypad to enter numbers.
●
Use
to enter decimals.
6. Ez Tip Calc
●
Use
to enter plus/minus change.
Allows you to quickly and easily estimate the initial
amounts for a bill with the calculated amount of the
bill, the amount and percentage of the tip, and the
number of people as variables.
●
Press Left Soft Key to clear the entry.
●
Press Right Soft Key to enter algebraic operators.
●
Use Navigation Key to enter operators.
●
Press
1. Press
,
,
.
to complete equation.
TO O L S
●
Note
Calculations can be made with up to 33 characters at one
time (e.g., 63+78-21 would be 8 characters).
65
UX390_Eng.qxd
7/7/06
6:01 PM
Page 66
TOOLS
8. World Clock
Allows you to determine the current time in another
time zone or country.
1. Press
,
,
.
Cities to move the time
2. Press Right Soft Key
bar across the world map and display the
date/time in that location.
Note
Press Left Soft Key
Set DST to display Daylight
Savings Time in the selected location.
TO O L S
66
UX390_Eng.qxd
7/7/06
6:01 PM
Page 67
SETTING
1. Sounds
Settings
The Settings Menu has options to customize your
phone.
Options to customize the phone’s sounds.
Access and Options
Allows you to assign ring tones for incoming calls.
1. Press Left Soft Key
2. Press
Menu.
Settings.
3. Select a sub-menu.
1.1 Ringers
1. Press
,
,
,
.
2. Select Caller ID/ No Caller ID/ Restricted Calls.
3. Use
to select a ringer, then press
1. Sounds
1.2 Key Tone
2. Display
Allows you to select the Key Tone type.
3. System
1. Press
4. Security
2. Select a tone style, then press
6. Data Settings
7. Voice Services
8. Location
Beep
,
,
.
.
Comes out a beep sound, when you press
the keys.
SETTINGS
5. Call Setup
,
.
English Comes out a voice (English), when you
press the keys.
Spanish Comes out a voice (Spanish), when you
press the keys.
67
UX390_Eng.qxd
7/7/06
6:01 PM
Page 68
SETTING
1.3 Volume
1.5 Service Alerts
Allows you to set various volume settings.
Allows you to set any of the 4 Alert options to On or Off.
1. Press
1. Press ,
,
,
2. Select an alert option.
,
,
,
.
2. Select Ringer/ Earpiece/ Key Beep/ Speaker
Phone.
3. Use
press
to adjust the volume of the ringer, then
to save the setting.
1.4 Message Alerts
,
,
,
.
SETTINGS
to select a setting, then press
Alerts you when service changes. Displays Entering
Service Area or Leaving Service Area message.
Alerts you 10 seconds before the end of every
minute during a call.
2. Select Voice Mail/ Text Message/ Photo Msg /
E-mail/ Page.
3. Use
1.5.1 Service Change
1.5.2 Minute Beep
Allows you to select the alert type for a new
message.
1. Press
.
.
1.5.3 Call Connect
Alerts you when the call is connected.
1.5.4 Back To Top
Alerts you when you scroll through the end of a
menu list.
3. Use
68
to set On/ Off, then press
.
UX390_Eng.qxd
7/7/06
6:01 PM
Page 69
1.6 Power On/Off Tone
Allows you to set the phone to sound a tone when
the phone is powered on and off.
1. Press
2. Use
,
,
,
2. Display
Options to customize the phone’s display screen.
2.1 Banner
.
to set to On/ Off, then press
.
Allows you to enter a string of up to 16 characters
which display on the LCD screen.
1.7 DTMF Length
1. Press
Allows you to set the Key tone length and touch tone
playback speed.
2. Enter your banner text, then press
1. Press ,
,
,
.
2. Select an option, then press
2.2 Backlight
.
Note
Dual-Tone Multi Frequency (DTMF) Signaling by the
simultaneous transmission of two tones, one from a group
of low frequencies and another from a group of high
frequencies. Each group of frequencies consists of four
frequencies. Setting the Key Beep length to Long will
extend the DTMF tone.
,
,
.
.
Allows you to set the duration for illuminating the
backlight. LCD and Key Light Timer are set separately.
Note
If an amount of time is set for the timer option, the time
starts after the last key was pressed.
SETTINGS
Normal Sends out a tone for a fixed period of
time even if you keep the key pressed.
Long Sends out a continuous tone for as long
as you keep the key pressed.
,
2.2.1 LCD
1. Press
,
,
,
,
2. Choose a sub-menu, then press
.
.
Timer/ Brightness
69
UX390_Eng.qxd
7/7/06
6:01 PM
Page 70
SETTINGS
2.2.2 Key Light Timer
1. Press
,
,
2.4 Menu Style
,
,
2. Choose a setting, then press
Allows you to view the Menu as an Icon or List
display.
.
.
1. Press
7 seconds/ 15 seconds/ Always on/ Always off
2.3 Screens
Allows you to choose the kind of background to be
displayed on the phone.
1. Press
,
,
.
,
,
.
2. Select Icon or List and press
.
2.5 Clocks
Allows you to choose the kind of clock to be
displayed on the LCD screen.
1. Press
,
,
,
.
SETTINGS
2. Select Wallpaper/ Power On/ Power Off, then
press
.
2. Select Normal/ Analog/ Digital, then press
3. Select from different screens, then press
3. Press Left Soft Key
4. Press
.
5. Left Soft Key
Right Soft Key
choices.
Save.
2.6 Theme Colors
.
Note
70
,
,
Save.
More, provides access to additional
Allows you to choose the color of the background
screen.
1. Press
,
,
,
.
2. Select Default/ Green/ Violet/ Orange, then
press
.
.
UX390_Eng.qxd
7/7/06
6:01 PM
Page 71
2.7 Contrast
2.8.2 Text Editor
Allows you to set the level of contrast for your LCD
screen.
1. Press
1. Press
,
,
,
.
2. Choose a Contrast sub-menu and press
to adjust the contrast level, then press
Allows you to set the size and color of the font for
calling digits and text editor.
to
.
.
,
,
,
.
SETTINGS
,
to choose a setting, then press
to select English or Spanish, then press
2. Use
,
.
2.9 Language
1. Press
2.8.1 Calling Digits
,
,
Allows you to set the bilingual feature according to
your preference. Choose between English and
Spanish.
2.8 Fonts
,
,
2. Select Size or Color sub-menu.
3. Press
save.
.
1. Press
,
Size/ Color
.
Main LCD/ Front LCD
3. Use
,
2. Select Size or Color sub-menu.
Size/ Color
3. Press
save.
to choose a setting, then press
to
71
UX390_Eng.qxd
7/7/06
6:01 PM
Page 72
SETTINGS
2.0 Power Saver
3.2 Set NAM
Display and buttons are lighted for a designated
length of time, allowing you of the convenience to
use your mobile phone in the dark.
Allows you to select the phone’s NAM (Number
Assignment Module) if the phone is registered with
multiple service providers.
1. Press
1. Press
,
,
,
.
,
,
.
2. Use
to select 2 min/ 10 min/ 30 min/ Off,
then press
.
2. Use
3. System
3.3 Auto NAM
The System menu allows you to designate specific
system network settings.
Allows the phone to automatically switch between
programmed telephone numbers corresponding to
the service provider area.
3.1 Select System
SETTINGS
Allows you to set up the phone producer’s
management environment. Leave this setting as the
default unless you want to alter system selection as
instructed by your service provider.
1. Press
,
,
,
.
2. Use
to select Home Only/ Automatic A/
Automatic B, then press
.
72
,
to select NAM1/ NAM2, then press
.
1. Press
,
,
,
.
to select On/ Off, then press
2. Use
.
3.4 Serving System
Identifies the channel number of a system that is
served as a SID Number. This information should only
be used for technical support.
1. Press
,
,
,
.
UX390_Eng.qxd
7/7/06
6:01 PM
Page 73
When locked, you can receive
incoming calls and make only
emergency calls.
4. Security
The Security menu allows you to secure the phone
electronically.
On Power Up
4.1 Lock Phone
Keeps your phone from unauthorized use. Once the
phone is locked, it is in restricted mode until the lock
code is entered. You can receive phone calls and still
make emergency calls.
You can modify the lock code using the New Lock
code within the Security menu.
1. Press
,
,
,
,
SETTINGS
1. Press
.
2. Enter the four-digit lock code.
Lock Phone.
to select an option, then press
Allows you to restrict incoming and outgoing calls. If
you set this feature to Outgoing Only, you can only
place calls to emergency numbers and phone
numbers stored in your Contacts.
You can receive the incoming calls from saved contacts on
your phone, when Incoming Only is on.
The default lock code is commonly the last 4
digits of your phone number.
4. Use
4.2 Restrict Calls
Note
.
2. Enter the four-digit lock code.
3. Press
The phone is locked when it is
turned on.
.
Unlock
The phone is never locked
(Lock mode can be used).
Lock
The phone is always locked.
3. Press
4. Use
Restrict Calls.
to select On/ Off, then press
.
73
UX390_Eng.qxd
7/7/06
6:01 PM
Page 74
SETTINGS
4.3 Emergency #s
4.5 Erase Contacts
Allows you to enter 3 emergency numbers. You can
call these emergency numbers and 911, even when
the phone is locked or restricted.
Allows you to erase all of your Contacts at once.
1. Press
2. Enter the four-digit lock code.
,
,
1. Press
.
4. Use
to select the emergency number
position, then press
.
Erase Contacts.
.
Allows you to reset your phone to the factory default
settings.
SETTINGS
1. Press
Allows you to enter a new four-digit lock code.
2. Enter the four-digit lock code.
1. Press
3. Press
,
,
.
2. Enter the four-digit lock code.
Change Lock.
4. Enter a new 4-digit lock code.
5. For confirmation, it will ask you to enter the new
lock code again.
.
4.6 Reset Default
4.4 Change Lock
3. Press
74
.
4. Select Erase all #s then press
Emergency #s.
5. Enter an emergency phone number, then press
,
3. Press
2. Enter the four-digit lock code.
3. Press
,
4. Press
5. Press
,
,
.
Reset Default.
.
Revert.
UX390_Eng.qxd
7/7/06
6:01 PM
Page 75
5. Call Setup
5.3 Auto Answer
The Call Setup menu allows you to designate how the
phone handles both incoming and outgoing calls.
Allows you to select the number of rings before the
phone automatically answers a call. This feature is
intended for use with hands free devices, but is an
independent feature of the phone and must be
manually turned on/off when connected or
disconnected from the device.
5.1 Auto Retry
Allows you to set the length of time the phone waits
before automatically redialing a number when the
attempted call fails.
1. Press
,
2. Use
,
,
.
to select a setting, then press
1. Press
2. Use
.
●
Off/ Every 10 seconds/ Every 30 seconds/
Every 60 seconds
●
Allows you to determine how to handle an answered
call.
2. Use
,
,
,
.
to select a setting, then press
Flip Open/ Any Key/ SEND Only
.
,
,
.
to select a setting, then press
.
Off
After 5 seconds When you have an incoming
call, the phone automatically responds after 5
seconds with the flip opened.
5.4 One-Touch Dial
Allows you to initiate a speed dial call by pressing
and holding the speed dial digit. If set to Disable,
Speed Dial numbers designated in your Contacts will
not function.
1. Press
,
,
,
SETTINGS
5.2 Answer Call
1. Press
,
.
2. Use
to select a setting, then press
Enable/ Disable
.
75
UX390_Eng.qxd
7/7/06
6:01 PM
Page 76
SETTINGS
5.5 Voice Privacy
5.7 TTY Mode
Allows you to set the voice privacy feature for CDMA
calls as Enhanced or Standard. CDMA offers inherent
voice privacy. Check with your service provider for
availability.
Allows you to attach a TTY (Teletype writer) device
enabling you to communicate with parties also using
a TTY device. A phone with TTY support is able to
translate typed characters to voice. Voice can also be
translated into characters and then displayed on the
TTY.
1. Press
,
2. Use
,
,
.
to select a setting, then press
.
Enhanced/ Standard
5.6 Auto Volume
SETTINGS
Provides a better audio experience by enabling the
Auto Volume feature to control the dynamic range
and volume of the sending and receiving voice across
different levels of speaker and environments.
1. Press
2. Use
On/ Off
,
,
,
.
to select a setting, then press
.
1. Press
,
,
.
2. Press
.
3. Use
to select a setting, then press
.
TTY Full/ TTY + TALK/ TTY + HEAR/ TTY Off
5.8 Airplane Mode
Allows you to use the general application and
restricts the output of RF communication.
1. Press
2. Use
On/ Off
76
,
,
,
,
.
to select a setting, then press
.
UX390_Eng.qxd
7/7/06
6:01 PM
Page 77
6. Data Settings
7. Voice Services
This menu allows you to use wireless data
communication services. Wireless data
communication services refers to the utilization of
subscriber terminals for access to the internet with
personal computers or laptops at 19.2 Kbps or at a
maximum of 230.4 Kbps. The connection speed
depends on your carrier’s network and other
variables. Check that communications information
specifications match the network.
Allows you to select options for voice activation,
announce alerts and recognition results; and enables
you to adapt the phone to recognize your way of
saying numbers.
7.1 Voice Commands
Allows you to set how you activate voice recognition.
1. Press
2. Use
6.1 PC Connection
,
,
to select a setting, then press
.
.
.
Flip Open Activates voice recognition whenever
you flip open the phone. (When the phone is
already open, you activate voice recognition by
pressing the voice command key.)
●
Side Key Only Activates voice recognition when
you flip open the phone and press the voice
command key.
.
USB/ RS-232C(COM Port)/ Closed
,
SETTINGS
2. Use
,
,
to select a setting, then press
●
Allows you to select the data port.
1. Press
,
77
UX390_Eng.qxd
7/7/06
6:01 PM
Page 78
SETTINGS
7.2 Sound Modes
7.3 Announce Alerts
Allows you to set Driving Mode/Announce Mode.
1. Press
2. Use
,
,
,
.
to select a setting, then press
.
Driving Mode/ Announce Mode/ Normal Mode
For example,
1) Press Left Soft Key
Menu.
2) Main menu screen appears, phone announces
“Main menu”.
3) Then, phone announces the first menu item
that is highlighted.
SETTINGS
4) When the cursor is moved, the highlighted
menu item is announced.
5) Menu readout only to the first sub-level.
Allows you to notify caller ID and sender of message
by voice.
1. Press
,
,
.
to select a setting, then press
.
On/ Off
Note
When Announce Alerts is set,
screen.
is displayed on the
7.4 Best Match
After you say a name or a number, your phone
displays the recognition results—the name or
number that best matches the one you said—and
asks you to confirm. Select the number of results that
you want your phone to display.
1. Press
2. Use
●
78
,
2. Use
,
,
,
.
to select a setting, the press
.
1 Result Displays the name or number that
best matches the one you said.
UX390_Eng.qxd
●
7/7/06
6:01 PM
Page 79
4 Results Displays the four names or numbers
that best match the one you said and asks you
if the first one is correct. If you say "Yes," the
phone makes the call. If you say "No," the
phone suggests the second one in the list, and
so on, up to the fourth result.
Command Train is an optional personalization feature
that helps your phone recognize the way you
pronounce commands. If you do not get consistent
good results with the commands, perform this brief,
one-time session.
,
,
,
.
1. Press
,
,
,
.
1. Press
2. Use
,
,
.
to select a setting, then press
.
Location On/ E911 Only
Note
.
GPS satellite signals are not always transmitted, especially
under bad atmospheric and environmental conditions,
indoors etc.
Commands/ Digits/ Yes, No/ Contacts/
Phone Label
to select a setting, then press
Menu for GPS (Global Positioning System: Satellite
assisted location information system) mode.
.
SETTINGS
2. Select a sub-menu, then press
3. Use
Helps you to use the Voice menu. Activate it by
following the instructions.
8. Location
7.5 Train Words
1. Press
7.6 Help
Training On/ Training Off
79
UX390_Eng.qxd
7/7/06
6:01 PM
Page 80
PHONE INFO
Phone Info
1. My Phone Number
The Phone Info menu provides you with specific
information pertaining to your phone model.
Allows you to view your phone number.
1. Press
Access and Options
2. S/W Version
1. Press Left Soft Key
2. Press
Menu.
Phone Info.
3. Select a sub-menu.
,
.
Allows you to view the software, PRL, easyedge and
VR.
1. Press
,
,
.
1. My Phone Number
3. Icon Glossary
2. S/W Version
Allows you to view all the icons and their meanings.
3. Icon Glossary
1. Press
P H O N E I N FO
4. Shortcut Help
,
,
.
4. Shortcut Help
Allows you to view condensed information about
using the phone.
1. Press
80
,
,
,
.
UX390_Eng.qxd
7/7/06
6:01 PM
Page 81
SAFETY
TIA Safety Information
The following is the complete TIA Safety Information
for wireless handheld phones.
Exposure to Radio Frequency Signal
Those standards were based on comprehensive and
periodic evaluations of the relevant scientific
literature. For example, over 120 scientists, engineers,
and physicians from universities, government health
agencies, and industry reviewed the available body of
research to develop the ANSI Standard (C95.1).
Your wireless handheld portable phone is a low power
radio transmitter and receiver. When ON, it receives
and sends out Radio Frequency (RF) signals.
The design of your phone complies with the FCC
guidelines (and those standards).
In August, 1996, the Federal Communications
Commissions (FCC) adopted RF exposure guidelines
with safety levels for handheld wireless phones.
Those guidelines are consistent with the safety
standards previously set by both U.S. and
international standards bodies:
Antenna Care
Use only the supplied or an approved replacement
antenna. Unauthorized antennas, modifications, or
attachments could damage the phone and may
violate FCC regulations.
Phone Operation
NCRP Report 86 (1986)
NORMAL POSITION: Hold the phone as you would
any other telephone with the antenna pointed up
and over your shoulder.
ICNIRP (1996)
* American National Standards Institute; National
Council on Radiation Protection and Measurements;
International Commission on Non-Ionizing Radiation
Protection
SA F E T Y
ANSI C95.1 (1992) *
81
UX390_Eng.qxd
7/7/06
6:01 PM
Page 82
SAFETY
Tips on Efficient Operation
For your phone to operate most efficiently:
Don’t touch the antenna unnecessarily when the
phone is in use. Contact with the antenna affects call
quality and may cause the phone to operate at a
higher power level than otherwise needed.
Driving
Check the laws and regulations on the use of wireless
phones in the areas where you drive and always obey
them. Also, if using your phone while driving, please
observe the following:
SA F E T Y
●
Give full attention to driving -- driving safely is
your first responsibility;
●
Use hands-free operation, if available;
●
Pull off the road and park before making or
answering a call if driving conditions or the law
require it.
Electronic Devices
Most modern electronic equipment is shielded from
RF signals. However, certain electronic equipment
82
may not be shielded against the RF signals from your
wireless phone.
Pacemakers
The Health Industry Manufacturers Association
recommends that a minimum separation of six (6)
inches be maintained between a handheld wireless
phone and a pacemaker to avoid potential
interference with the pacemaker. These
recommendations are consistent with the
independent research by and recommendations of
Wireless Technology Research.
Persons with pacemakers:
●
Should ALWAYS keep the phone more than six (6)
inches from their pacemaker when the phone is
turned ON;
●
Should not carry the phone in a breast pocket;
●
Should use the ear opposite the pacemaker to
minimize the potential for interference;
●
Should turn the phone OFF immediately if there is
any reason to suspect that interference is taking
place.
UX390_Eng.qxd
7/7/06
6:01 PM
Page 83
Hearing Aids
Vehicles
Some digital wireless phones may interfere with some
hearing aids. In the event of such interference, you
may want to consult your service provider (or call the
customer service line to discuss alternatives).
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle. You should
also consult the manufacturer of any equipment that
has been added to your vehicle.
Other Medical Devices
If you use any other personal medical device, consult
the manufacturer of your device to determine if it is
adequately shielded from external RF energy. Your
physician may be able to assist you in obtaining this
information.
Health Care Facilities
Turn your phone OFF in any facility where posted
notices so require.
Aircraft
FCC regulations prohibit using your phone while in
the air. Switch OFF your phone before boarding an
aircraft.
Blasting Areas
SA F E T Y
Turn your phone OFF in health care facilities when
any regulations posted in these areas instruct you to
do so. Hospitals or health care facilities may use
equipment that could be sensitive to external RF
energy.
Posted Facilities
To avoid interfering with blasting operations, turn
your phone OFF when in a “blasting area” or in areas
posted: “Turn off two-way radio”. Obey all signs and
instructions.
83
UX390_Eng.qxd
7/7/06
6:01 PM
Page 84
SAFETY
Potentially Explosive Atmosphere
Safety Information
Turn your phone OFF when in any area with a
potentially explosive atmosphere and obey all signs
and instructions. Sparks in such areas could cause an
explosion or fire resulting in bodily injury or even
death.
Please read and observe the following information for
safe and proper use of your phone and to prevent
damage. Also, keep the user guide in an accessible
place at all times after reading it.
Areas with a potentially explosive atmosphere are
often, but not always marked clearly. Potential areas
may include: fueling areas (such as gasoline stations);
below deck on boats; fuel or chemical transfer or
storage facilities; vehicles using liquefied petroleum
gas (such as propane or butane); areas where the air
contains chemicals or particles (such as grain, dust,
or metal powders); and any other area where you
would normally be advised to turn off your vehicle
engine.
SA F E T Y
84
For Vehicles Equipped with an Air Bag
An air bag inflates with great force. DO NOT place
objects, including either installed or portable wireless
equipment, in the area over the air bag or in the air
bag deployment area. If in-vehicle wireless equipment
is improperly installed and the air bag inflates, serious
injury could result.
Caution! V i o l a t i o n o f t h e i n s t r u c t i o n s m a y
cause minor or serious damage to the product.
Charger and Adapter Safety
●
The charger and adapter are intended for indoor
use only.
●
Insert the battery pack charger vertically into the
wall power socket.
●
Use the correct adapter for your phone when
using the battery pack charger abroad.
●
Only use the approved battery charger. Otherwise,
you may cause serious damage to your phone.
Battery Information and Care
●
Please dispose of your battery properly or take it
to your local wireless carrier for recycling.
●
The battery doesn't need to be empty before
recharging.
UX390_Eng.qxd
7/7/06
6:01 PM
Page 85
●
Use only LG-approved chargers specific to your
phone model since they are designed to maximize
battery life.
●
Do not disassemble or short-circuit the battery.
●
Keep the battery’s metal contacts clean.
●
Replace the battery when it no longer provides
acceptable performance. The battery can be
recharged several hundred times before replacement.
●
Recharge the battery after long periods of non-use
to maximize battery life.
Battery life will vary due to usage patterns and
environmental conditions.
●
Use of extended backlighting, Browser, and data
connectivity kits affect battery life and
talk/standby times.
●
The self-protection function of the battery cuts the
power of the phone when its operation is in an
abnormal state. In this case, remove the battery
from the phone, reinstall it, and turn the phone on.
Unplug the power cord prior to cleaning your
phone, and clean the power plug pin when it’s dirty.
●
When using the power plug, ensure that it’s firmly
connected. If not, it may cause excessive heat or fire.
●
If you put your phone in a pocket or bag without
covering the receptacle of the phone (power plug
pin), metallic articles (such as a coin, paperclip or
pen) may short-circuit the phone. Always cover the
receptacle when not in use.
●
Don’t short-circuit the battery. Metallic articles
such as a coin, paperclip or pen in your pocket or
bag may short-circuit the + and – terminals of the
battery (metal strips on the battery) upon moving.
Short-circuit of the terminal may damage the
battery and cause an explosion.
●
Do not disassemble or crush the battery. It may
cause a fire.
General Notice
●
Using a damaged battery or placing a battery in
your mouth may cause serious injury.
●
Do not place items containing magnetic
components such as a credit card, phone card,
bank book, or subway ticket near your phone. The
Explosion, Shock, and Fire Hazards
●
Do not put your phone in a place subject to
excessive dust and keep the minimum required
distance between the power cord and heat sources.
SA F E T Y
●
●
85
UX390_Eng.qxd
7/7/06
6:01 PM
Page 86
SAFETY
important phone numbers. (Ring tones, text
messages, voice messages, pictures, and videos
could also be deleted.) The manufacturer is not
liable for damage due to the loss of data.
magnetism of the phone may damage the data
stored in the magnetic strip.
●
●
SA F E T Y
86
Talking on your phone for a long period of time
may reduce call quality due to heat generated
during use.
When the phone is not used for a long period
time, store it in a safe place with the power cord
unplugged.
●
When you use the phone in public places, set the
ringtone to vibration so you don't disturb others.
●
Do not turn your phone on or off when putting it
to your ear.
Use accessories, such as earphones and headsets,
with caution. Ensure that cables are tucked away
safely and do not touch the antenna unnecessarily.
●
Using the phone in proximity to receiving
equipment (i.e., TV or radio) may cause
interference to the phone.
●
●
Do not use the phone if the antenna is damaged.
If a damaged antenna contacts skin, it may cause a
slight burn. Please contact an LG Authorized
Service Center to replace the damaged antenna.
●
Do not immerse your phone in water. If this
happens, turn it off immediately and remove the
battery. If the phone does not work, take it to an
LG Authorized Service Center.
If you are listening to music whilst out and about,
please ensure that the volume is at a reasonable level
so that you are aware of your surroundings. This is
particularly imperative when attempting to cross the
street.
●
Do not paint your phone.
●
The data saved in your phone might be deleted
due to careless use, repair of the phone, or
upgrade of the software. Please backup your
Avoid damage to your hearing
Damage to your hearing can occur if you are exposed
to loud sound for long periods of time. We therefore
recommend that you do not turn on or off the
handset close to your ear. We also recommend that
music and call volumes are set to a reasonable level.
UX390_Eng.qxd
7/7/06
6:01 PM
Page 87
FDA Consumer Update
The U.S. Food and Drug Administration’s Center for
Devices and Radiological Health Consumer Update
on Mobile Phones:
1. Do wireless phones pose a health hazard?
Under the law, the FDA does not review the safety of
radiation-emitting consumer products such as
wireless phones before they can be sold, as it does
with new drugs or medical devices. However, the
agency has authority to take action if wireless phones
are shown to emit Radio Frequency (RF) energy at a
level that is hazardous to the user. In such a case, the
FDA could require the manufacturers of wireless
phones to notify users of the health hazard and to
repair, replace, or recall the phones so that the
hazard no longer exists.
Although the existing scientific data do not justify
FDA regulatory actions, the FDA has urged the
wireless phone industry to take a number of steps,
including the following:
●
Support needed research into possible biological
effects of RF of the type emitted by wireless
phones;
●
Design wireless phones in a way that minimizes any
RF exposure to the user that is not necessary for
device function; and
SA F E T Y
The available scientific evidence does not show that
any health problems are associated with using
wireless phones. There is no proof, however, that
wireless phones are absolutely safe. Wireless phones
emit low levels of Radio Frequency (RF) energy in the
microwave range while being used. They also emit
very low levels of RF when in standby mode. Whereas
high levels of RF can produce health effects (by
heating tissue), exposure to low level RF that does
not produce heating effects causes no known adverse
health effects. Many studies of low level RF exposures
have not found any biological effects. Some studies
have suggested that some biological effects may
occur, but such findings have not been confirmed by
additional research. In some cases, other researchers
have had difficulty in reproducing those studies, or in
determining the reasons for inconsistent results.
2. What is the FDA's role concerning the safety of
wireless phones?
87
UX390_Eng.qxd
7/7/06
6:01 PM
Page 88
SAFETY
●
Cooperate in providing users of wireless phones
with the best possible information on possible
effects of wireless phone use on human health.
The FDA belongs to an interagency working group of
the federal agencies that have responsibility for
different aspects of RF safety to ensure coordinated
efforts at the federal level. The following agencies
belong to this working group:
SA F E T Y
88
●
National Institute for Occupational Safety and
Health
●
Environmental Protection Agency
●
Occupational Safety and Health Administration
●
National Telecommunications and Information
Administration
questions about wireless phones.
The FCC also regulates the base stations that the
wireless phone networks rely upon. While these base
stations operate at higher power than do the wireless
phones themselves, the RF exposures that people get
from these base stations are typically thousands of
times lower than those they can get from wireless
phones. Base stations are thus not the subject of the
safety questions discussed in this document.
3. What kinds of phones are the subject of this
update?
The National Institutes of Health participates in
some interagency working group activities, as well.
The term “wireless phone” refers here to handheld
wireless phones with built-in antennas, often called
“cell”, “mobile”, or “PCS” phones. These types of
wireless phones can expose the user to measurable
Radio Frequency (RF) energy because of the short
distance between the phone and the user’s head.
The FDA shares regulatory responsibilities for wireless
phones with the Federal Communications
Commission (FCC). All phones that are sold in the
United States must comply with FCC safety
guidelines that limit RF exposure. The FCC relies on
the FDA and other health agencies for safety
These RF exposures are limited by FCC safety
guidelines that were developed with the advice of the
FDA and other federal health and safety agencies.
When the phone is located at greater distances from
the user, the exposure to RF is drastically lower
because a person's RF exposure decreases rapidly
UX390_Eng.qxd
7/7/06
6:01 PM
Page 89
with increasing distance from the source. The socalled “cordless phones,” which have a base unit
connected to the telephone wiring in a house,
typically operate at far lower power levels, and thus
produce RF exposures far below the FCC safety
limits.
4. What are the results of the research done
already?
5. What research is needed to decide whether RF
exposure from wireless phones poses a health risk?
A combination of laboratory studies and
epidemiological studies of people actually using
wireless phones would provide some of the data that
are needed. Lifetime animal exposure studies could
be completed in a few years. However, very large
numbers of animals would be needed to provide
reliable proof of a cancer promoting effect if one
SA F E T Y
The research done thus far has produced conflicting
results, and many studies have suffered from flaws in
their research methods. Animal experiments
investigating the effects of Radio Frequency (RF)
energy exposures characteristic of wireless phones
have yielded conflicting results that often cannot be
repeated in other laboratories. A few animal studies,
however, have suggested that low levels of RF could
accelerate the development of cancer in laboratory
animals. However, many of the studies that showed
increased tumor development used animals that had
been genetically engineered or treated with cancercausing chemicals so as to be pre-disposed to
develop cancer in the absence of RF exposure. Other
studies exposed the animals to RF for up to 22 hours
per day. These conditions are not similar to the
conditions under which people use wireless phones,
so we do not know with certainty what the results of
such studies mean for human health. Three large
epidemiology studies have been published since
December 2000. Between them, the studies
investigated any possible association between the
use of wireless phones and primary brain cancer,
glioma, meningioma, or acoustic neuroma, tumors of
the brain or salivary gland, leukemia, or other
cancers. None of the studies demonstrated the
existence of any harmful health effects from wireless
phone RF exposures. However, none of the studies
can answer questions about long-term exposures,
since the average period of phone use in these
studies was around three years.
89
UX390_Eng.qxd
7/7/06
6:01 PM
Page 90
SAFETY
exists. Epidemiological studies can provide data that
is directly applicable to human populations, but ten
or more years follow-up may be needed to provide
answers about some health effects, such as cancer.
This is because the interval between the time of
exposure to a cancer-causing agent and the time
tumors develop — if they do — may be many, many
years. The interpretation of epidemiological studies is
hampered by difficulties in measuring actual RF
exposure during day-to-day use of wireless phones.
Many factors affect this measurement, such as the
angle at which the phone is held, or which model of
phone is used.
6. What is the FDA doing to find out more about
the possible health effects of wireless phone RF?
SA F E T Y
The FDA is working with the U.S. National Toxicology
Program and with groups of investigators around the
world to ensure that high priority animal studies are
conducted to address important questions about the
effects of exposure to Radio Frequency (RF) energy.
The FDA has been a leading participant in the World
Health Organization International Electro Magnetic
Fields (EMF) Project since its inception in 1996. An
influential result of this work has been the
90
development of a detailed agenda of research needs
that has driven the establishment of new research
programs around the world. The project has also
helped develop a series of public information
documents on EMF issues.
The FDA and the Cellular Telecommunications &
Internet Association (CTIA) have a formal
Cooperative Research And Development Agreement
(CRADA) to do research on wireless phone safety.
The FDA provides the scientific oversight, obtaining
input from experts in government, industry, and
academic organizations. CTIA-funded research is
conducted through contracts with independent
investigators. The initial research will include both
laboratory studies and studies of wireless phone
users. The CRADA will also include a broad
assessment of additional research needs in the
context of the latest research developments around
the world.
UX390_Eng.qxd
7/7/06
6:01 PM
Page 91
7. How can I find out how much Radio Frequency
energy exposure I can get by using my wireless
phone?
The Institute of Electrical and Electronic Engineers
(IEEE) is developing a technical standard for
measuring the Radio Frequency (RF) energy exposure
from wireless phones and other wireless handsets
with the participation and leadership of FDA
scientists and engineers. The standard,
“Recommended Practice for Determining the SpatialPeak Specific Absorption Rate (SAR) in the Human
Body Due to Wireless Communications Devices:
Experimental Techniques”, sets forth the first
consistent test methodology for measuring the rate
at which RF is deposited in the heads of wireless
phone users. The test method uses a tissuesimulating model of the human head. Standardized
SAR test methodology is expected to greatly improve
the consistency of measurements made at different
laboratories on the same phone. SAR is the
measurement of the amount of energy absorbed in
tissue, either by the whole body or a small part of
the body. It is measured in watts/kg (or milliwatts/g)
of matter. This measurement is used to determine
whether a wireless phone complies with safety
guidelines.
SA F E T Y
All phones sold in the United States must comply with
Federal Communications Commission (FCC)
guidelines that limit Radio Frequency (RF) energy
exposures. The FCC established these guidelines in
consultation with the FDA and the other federal
health and safety agencies. The FCC limit for RF
exposure from wireless phones is set at a Specific
Absorption Rate (SAR) of 1.6 watts per kilogram (1.6
W/kg). The FCC limit is consistent with the safety
standards developed by the Institute of Electrical and
Electronic Engineering (IEEE) and the National
Council on Radiation Protection and Measurement.
The exposure limit takes into consideration the body’s
ability to remove heat from the tissues that absorb
energy from the wireless phone and is set well below
levels known to have effects. Manufacturers of wireless
phones must report the RF exposure level for each
model of phone to the FCC. The FCC website
(http://www.fcc.gov/oet/rfsafety) gives directions for
locating the FCC identification number on your phone
so you can find your phone’s RF exposure level in the
online listing.
8. What has the FDA done to measure the Radio
Frequency energy coming from wireless phones?
91
UX390_Eng.qxd
7/7/06
6:01 PM
Page 92
SAFETY
9. What steps can I take to reduce my exposure to
Radio Frequency energy from my wireless phone?
SA F E T Y
92
If there is a risk from these products — and at this
point we do not know that there is — it is probably
very small. But if you are concerned about avoiding
even potential risks, you can take a few simple steps
to minimize your exposure to Radio Frequency (RF)
energy. Since time is a key factor in how much
exposure a person receives, reducing the amount of
time spent using a wireless phone will reduce RF
exposure. If you must conduct extended
conversations by wireless phone every day, you could
place more distance between your body and the
source of the RF, since the exposure level drops off
dramatically with distance. For example, you could
use a headset and carry the wireless phone away
from your body or use a wireless phone connected to
a remote antenna. Again, the scientific data do not
demonstrate that wireless phones are harmful. But if
you are concerned about the RF exposure from these
products, you can use measures like those described
above to reduce your RF exposure from wireless
phone use.
10. What about children using wireless phones?
The scientific evidence does not show a danger to
users of wireless phones, including children and
teenagers. If you want to take steps to lower
exposure to Radio Frequency (RF) energy, the
measures described above would apply to children
and teenagers using wireless phones. Reducing the
time of wireless phone use and increasing the
distance between the user and the RF source will
reduce RF exposure.
Some groups sponsored by other national
governments have advised that children be
discouraged from using wireless phones at all. For
example, the government in the United Kingdom
distributed leaflets containing such a
recommendation in December 2000. They noted
that no evidence exists that using a wireless phone
causes brain tumors or other ill effects. Their
recommendation to limit wireless phone use by
children was strictly precautionary; it was not based
on scientific evidence that any health hazard exists.
UX390_Eng.qxd
7/7/06
6:01 PM
Page 93
11. What about wireless phone interference with
medical equipment?
at the same time. This standard was approved by the
IEEE in 2000.
Radio Frequency (RF) energy from wireless phones
can interact with some electronic devices. For this
reason, the FDA helped develop a detailed test
method to measure Electro Magnetic Interference
(EMI) of implanted cardiac pacemakers and
defibrillators from wireless telephones. This test
method is now part of a standard sponsored by the
Association for the Advancement of Medical
Instrumentation (AAMI). The final draft, a joint effort
by the FDA, medical device manufacturers, and many
other groups, was completed in late 2000. This
standard will allow manufacturers to ensure that
cardiac pacemakers and defibrillators are safe from
wireless phone EMI.
The FDA continues to monitor the use of wireless
phones for possible interactions with other medical
devices. Should harmful interference be found to
occur, the FDA will conduct testing to assess the
interference and work to resolve the problem.
SA F E T Y
The FDA has tested hearing aids for interference from
handheld wireless phones and helped develop a
voluntary standard sponsored by the Institute of
Electrical and Electronic Engineers (IEEE). This
standard specifies test methods and performance
requirements for hearing aids and wireless phones so
that no interference occurs when a person uses a
“compatible” phone and a “compatible” hearing aid
12. Where can I find additional information?
For additional information, please refer to the
following resources:
FDA web page on wireless phones
(http://www.fda.gov/cellphones/)
Federal Communications Commission (FCC) RF
Safety Program
(http://www.fcc.gov/oet/rfsafety)
International Commission on Non-lonizing Radiation
Protection
(http://www.icnirp.de)
World Health Organization (WHO) International EMF
Project
(http://www.who.int/emf)
National Radiological Protection Board (UK)
(http://www.hpa.org.uk/radiation/)
93
UX390_Eng.qxd
7/7/06
6:01 PM
Page 94
SAFETY
10 Driver Safety Tips
Your wireless phone gives you the powerful ability to
communicate by voice almost anywhere, anytime. An
important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
When operating a car, driving is your first
responsibility. When using your wireless phone
behind the wheel of a car, practice good common
sense and remember the following tips:
SA F E T Y
94
1. Get to know your wireless phone and its features
such as speed dial and redial. Carefully read your
instruction manual and learn to take advantage of
valuable features most phones offer, including
automatic redial and memory. Also, work to
memorize the phone keypad so you can use the
speed dial function without taking your attention
off the road.
2. When available, use a hands-free device. A number
of hands-free wireless phone accessories are
readily available today. Whether you choose an
installed mounted device for your wireless phone
or a speaker phone accessory, take advantage of
these devices if available to you.
3. Make sure you place your wireless phone within
easy reach and where you can reach it without
removing your eyes from the road. If you get an
incoming call at an inconvenient time, if possible,
let your voicemail answer it for you.
4. Suspend conversations during hazardous driving
conditions or situations. Let the person you are
speaking with know you are driving; if necessary,
suspend the call in heavy traffic or hazardous
weather conditions. Rain, sleet, snow, and ice can be
hazardous, but so is heavy traffic. As a driver, your
first responsibility is to pay attention to the road.
5. Don’t take notes or look up phone numbers while
driving. If you are reading an address book or
business card, or writing a “to-do” list while driving
a car, you are not watching where you are going. It
is common sense. Do not get caught in a
dangerous situation because you are reading or
writing and not paying attention to the road or
nearby vehicles.
6. Dial sensibly and assess the traffic; if possible,
place calls when you are not moving or before
UX390_Eng.qxd
7/7/06
6:01 PM
Page 95
pulling into traffic. Try to plan your calls before
you begin your trip or attempt to coincide your
calls with times you may be stopped at a stop
sign, red light, or otherwise stationary. But if you
need to dial while driving, follow this simple tip -dial only a few numbers, check the road and your
mirrors, then continue.
7. Do not engage in stressful or emotional
conversations that may be distracting. Stressful or
emotional conversations and driving do not mix;
they are distracting and even dangerous when you
are behind the wheel of a car. Make people you
are talking with aware you are driving and if
necessary, suspend conversations which have the
potential to divert your attention from the road.
10. Call roadside assistance or a special wireless nonemergency assistance number when necessary.
Certain situations you encounter while driving
may require attention, but are not urgent enough
to merit a call for emergency services. But you
can still use your wireless phone to lend a hand.
If you see a broken-down vehicle posing no
serious hazard, a broken traffic signal, a minor
traffic accident where no one appears injured or a
vehicle you know to be stolen, call roadside
assistance or other special non-emergency
wireless number.
SA F E T Y
8. Use your wireless phone to call for help. Your
wireless phone is one of the greatest tools you can
own to protect yourself and your family in
dangerous situations -- with your phone at your
side, help is only three numbers away. Dial 911 or
other local emergency number in the case of fire,
traffic accident, road hazard, or medical
emergency. Remember, it’s a free call on your
wireless phone!
9. Use your wireless phone to help others in
emergencies. Your wireless phone provides you a
perfect opportunity to be a “Good Samaritan” in
your community. If you see an auto accident, crime
in progress or other serious emergency where lives
are in danger, call 911 or other local emergency
number, as you would want others to do for you.
For more information, please call to 888-901-SAFE,
or visit our website http://www.ctia.org.
95
UX390_Eng.qxd
7/7/06
6:01 PM
Page 96
SAFETY
Consumer Information on SAR
(Specific Absorption Rate)
SA F E T Y
96
This model phone meets the government's
requirements for exposure to radio waves. Your
wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the
emission limits for exposure to Radio Frequency (RF)
energy set by the Federal Communications
Commission of the U.S. Government. These limits are
part of comprehensive guidelines and establish
permitted levels of RF energy for the general
population. The guidelines are based on standards
that were developed by independent scientific
organizations through periodic and thorough
evaluation of scientific studies. The standards include
a substantial safety margin designed to assure the
safety of all persons, regardless of age and health.
The exposure standard for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit set by the
FCC is 1.6 W/kg. Tests for SAR are conducted using
standard operating positions specified by the FCC
with the phone transmitting at its highest certified
power level in all tested frequency bands. Although
SAR is determined at the highest certified power
level, the actual SAR level of the phone while
operating can be well below the maximum value.
Because the phone is designed to operate at multiple
power levels to use only the power required to reach
the network, in general, the closer you are to a
wireless base station antenna, the lower the power
output.
Before a phone model is available for sale to the
public, it must be tested and certified to the FCC
that it does not exceed the limit established by the
government-adopted requirement for safe exposure.
The tests are performed in positions and locations
(e.g., at the ear and worn on the body) as required
by the FCC for each model.
The highest SAR value for this model phone when
tested for use at the ear is 1.21 W/kg and when
worn on the body, as described in this user guide, is
1.28W/kg (body-worn measurements differ among
phone models, depending upon available accessories
and FCC requirements). While there may be
differences between SAR levels of various phones and
at various positions, they all meet the government
requirement for safe exposure.
UX390_Eng.qxd
7/7/06
6:01 PM
Page 97
The FCC has granted an Equipment Authorization for
this model phone with all reported SAR levels
evaluated as in compliance with the FCC RF emission
guidelines. SAR information on this model phone is
on file with the FCC and can be found under the
Display Grant section of
http://www.fcc.gov/oet/fccid after searching on FCC
ID BEJVX4700. Additional information on Specific
Absorption Rates (SAR) can be found on the Cellular
Telecommunications Industry Association (CTIA)
http://www.ctia.org/
On July 10, 2003, the U.S. Federal Communications
Commission (FCC) Report and Order in WT Docket
01-309 modified the exception of wireless phones
under the Hearing Aid Compatibility Act of 1988
(HAC Act) to require digital wireless phones be
compatible with hearing-aids. The intent of the HAC
Act is to ensure reasonable access to
telecommunications services for persons with hearing
disabilities.
While some wireless phones are used near some
hearing devices (hearing aids and cochlear implants),
users may detect a buzzing, humming, or whining
noise. Some hearing devices are more immune than
others to this interference noise, and phones also
vary in the amount of interference they generate.
The wireless telephone industry has developed a
rating system for wireless phones, to assist hearing
device users to find phones that may be compatible
with their hearing devices. Not all phones have been
rated. Phones that are rated have the rating on their
box or a label located on the box.
SA F E T Y
* In the United States and Canada, the SAR limit for
mobile phones used by the public is 1.6 watts/kg
(W/kg) averaged over one gram of tissue. The
standard incorporates a substantial margin of safety
to give additional protection for the public and to
account for any variations in measurements.
FCC Hearing-Aid Compatibility (HAC)
Regulations for Wireless Devices
97
UX390_Eng.qxd
7/7/06
6:01 PM
Page 98
SAFETY
The ratings are not guarantees. Results will vary
depending on the user's hearing device and hearing
loss. If your hearing device happens to be vulnerable
to interference, you may not be able to use a rated
phone successfully. Trying out the phone with your
hearing device is the best way to evaluate it for your
personal needs.
M-Ratings: Phones rated M3 or M4 meet FCC
requirements and are likely to generate less
interference to hearing devices than phones that are
not labeled. M4 is the better/higher of the two
ratings.
SA F E T Y
98
Hearing devices may also be rated. Your hearing
device manufacturer or hearing health professional
may help you find this rating. Higher ratings mean
that the hearing device is relatively immune to
interference noise. The hearing aid and wireless
phone rating values are then added together. A sum
of 5 is considered acceptable for normal use. A sum
of 6 is considered for best use.
In the above example, if a hearing aid meets the M2
level rating and the wireless phone meets the M3
level rating, the sum of the two values equal M5. This
should provide the hearing aid user with “normal
usage” while using their hearing aid with the
particular wireless phone. “Normal usage” in this
context is defined as a signal quality that is
acceptable for normal operation.
The M mark is intended to be synonymous with the
U mark. The T mark is intended to be synonymous
with the UT mark. The M and T marks are
recommended by the Alliance for
Telecommunications Industries Solutions (ATIS). The
U and UT marks are referenced in Section 20.19 of
the FCC Rules. The HAC rating and measurement
procedure are described in the American National
UX390_Eng.qxd
7/7/06
6:01 PM
Page 99
Standards Institute (ANSI) C63.19 standard.
For information about hearing aids and digital
wireless phones
FCC Hearing Aid Compatibility and Volume
Control
http://www.fcc.gov/cgb/dro/hearing.html
Gallaudet University, RERC
http://tap.gallaudet.edu/DigWireless.KS/DigWireless.htm
HLAA (Hearing Loss Association of America)
http://www.hearingloss.org/learn/cellphonetech.asp
http://hraunfoss.fcc.gov/edocs_public/attachmatc
h/FCC-03-168A1.pdf
SA F E T Y
The Hearing Aid Compatibility FCC Order
99
UX390_Eng.qxd
7/7/06
6:02 PM
Page 100
ACCESSORIES
There are a variety of accessories available for your mobile phone. Consult your local dealer for availability.
Optional items are sold separately.
Battery Charger
The battery pack charger allows you to
charge the battery pack itself without
the phone.
Battery
Swiwel Holster
Standard battery and extended battery
are available.
Equip a holster with the phone to make
it stable by attaching it to one place.
Headset
AC C E S S O R I E S
100
Battery Pack Charger
The battery charger allows you to
charge your phone.
The headset connects to your
phone allowing hands-free
operation. It includes earpiece,
microphone.
UX390_Eng.qxd
7/7/06
6:02 PM
Page 101
LIMITED WARRANTY STATEMENT
1. WHAT THIS WARRANTY COVERS:
LG offers you a limited warranty that the enclosed
subscriber unit and its enclosed accessories will be
free from defects in material and workmanship,
according to the following terms and conditions:
(2) The limited warranty extends only to the original
purchaser of the product and is not assignable
or transferable to any subsequent purchaser/end
user.
(5) Upon request from LG, the consumer must
provide information to reasonably prove the date
of purchase.
(6) The customer shall bear the cost of shipping the
product to the Customer Service Department of
LG. LG shall bear the cost of shipping the
product back to the consumer after the
completion of service under this limited warranty.
L I M I T E D WA R RA N T Y STAT E M E N T
(1) The limited warranty for the product extends for
TWELVE (12) MONTHS beginning on the date
of purchase of the product with valid proof of
purchase, or absent valid proof of purchase,
FIFTEEN (15) MONTHS from date of
manufacture as determined by the unit’s
manufacture date code.
(4) The external housing and cosmetic parts shall be
free of defects at the time of shipment and,
therefore, shall not be covered under these
limited warranty terms.
(3) This warranty is good only to the original
purchaser of the product during the warranty
period as long as it is in the U.S, including
Alaska, Hawaii, U.S. Territories and Canada.
101
UX390_Eng.qxd
7/7/06
6:02 PM
Page 102
LIMITED WARRANTY STATEMENT
2. WHAT THIS WARRANTY DOES NOT COVER:
(1) Defects or damages resulting from use of the
product in other than its normal and customary
manner.
L I M I T E D WA R RA N T Y STAT E M E N T
(2) Defects or damages from abnormal use,
abnormal conditions, improper storage,
exposure to moisture or dampness,
unauthorized modifications, unauthorized
connections, unauthorized repair, misuse,
neglect, abuse, accident, alteration, improper
installation, or other acts which are not the fault
of LG, including damage caused by shipping,
blown fuses, spills of food or liquid.
(3) Breakage or damage to antennas unless caused
directly by defects in material or workmanship.
(4) That the Customer Service Department at LG
was not notified by consumer of the alleged
defect or malfunction of the product during the
applicable limited warranty period.
(5) Products which have had the serial number
removed or made illegible.
102
(6) This limited warranty is in lieu of all other
warranties, express or implied either in fact or by
operations of law, statutory or otherwise,
including, but not limited to any implied warranty
of marketability or fitness for a particular use.
(7) Damage resulting from use of non-LG approved
accessories.
(8) All plastic surfaces and all other externally
exposed parts that are scratched or damaged
due to normal customer use.
(9) Products operated outside published maximum
ratings.
(10) Products used or obtained in a rental program.
(11) Consumables (such as fuses).
UX390_Eng.qxd
7/7/06
6:02 PM
Page 103
3. STATE LAW RIGHTS:
4. HOW TO GET WARRANTY SERVICE:
No other express warranty is applicable to this
product. THE DURATION OF ANY IMPLIED
WARRANTIES, INCLUDING THE IMPLIED
WARRANTY OF MARKETABILITY, IS LIMITED TO
THE DURATION OF THE EXPRESS WARRANTY
HEREIN. LGE MOBILECOMM USA INC. SHALL NOT
BE LIABLE FOR THE LOSS OF THE USE OF THE
PRODUCT, INCONVENIENCE, LOSS OR ANY
OTHER DAMAGES, DIRECT OR CONSEQUENTIAL,
ARISING OUT OF THE USE OF, OR INABILITY TO
USE, THIS PRODUCT OR FOR ANY BREACH OF
ANY EXPRESS OR IMPLIED WARRANTY,
INCLUDING THE IMPLIED WARRANTY OF
MARKETABILITY APPLICABLE TO THIS PRODUCT.
To obtain warranty service, please call or fax to the
following telephone numbers from anywhere in the
continental United States:
Or visit http://us.lgservice.com. Correspondence may
also be mailed to:
LG Electronics Service- Mobile Handsets
P.O. Box 240007, Huntsville, AL 35824
DO NOT RETURN YOUR PRODUCT TO THE
ABOVE ADDRESS. Please call or write for the
location of the LG authorized service center nearest
you and for the procedures for obtaining warranty
claims.
L I M I T E D WA R RA N T Y STAT E M E N T
Some states do not allow the exclusive limitation of
incidental or consequential damages or limitations on
how long an implied warranty lasts; so these
limitations or exclusions may not apply to you. This
warranty gives you specific legal rights and you may
also have other rights which vary from state to state.
Tel. 1-800-793-8896 or Fax. 1-800-448-4026
103
UX390_Eng.qxd
7/7/06
6:02 PM
Page 104
INDEX
A
Accessories
Airplane Mode
Alarm Clock
Announce Alerts
Answer Call
Auto Answer
Auto NAM
Auto Volume
B
Backlight
Banner
Battery
Battery Charge Level
Best Match
C
INDEX
104
Calculator
Call Setup
Call Timer
Change Lock
Charging the Battery
Clocks
100
76
63
78
75
75
72
76
Contacts
Contrast
D
Data Settings
Dialed Calls
Display
DTMF Length
E
69
69
16
17
78
65
75
40
74
17
70
E-mail
easyedgeSM
Emergency #s
Erase All
Erase Calls
Erase Contacts
Ez Tip Calc
36
71
77
39
69
69
37
59
74
51
40
74
65
F
FCC Part 15 Class B
Compliance
FCC RF Exposure
Information
Fonts
9
11
71
G
Groups
H
Help
I
Icon Glossary
Images
Important Information
Important Safety
Precautions
Inbox
Installing the Battery
K
KB Counter
Key Tone
L
Language
List Contacts
Location
37
Lock Mode
Lock Phone
M
60
80
61
9
1
47
16
41
67
71
36
79
Manner Mode
Media
Menu Style
Menus Overview
Message Alerts
Messages
Missed Calls
Msg Settings
My Contact Info
My Phone Number
My Shortcut
N
Notepad
Number
O
One-Touch Dial
Outbox
20
73
20
61
70
14
68
42
40
50
38
80
64
64
37
75
49
UX390_Eng.qxd
7/7/06
P
Phone Info
Phone Overview
Photo Msg
Power On/Off Tone
Power Saver
R
Received Calls
Recent Calls
Removing the Battery
Reset Default
Restrict Calls
Ringers
S
40
39
16
74
73
67
80
50
62
18
70
73
68
72
Page 105
Settings
Shortcut Help
Sound Modes
Sounds
Speed Dials
SpeedTalkSM
System
T
67
80
78
61, 67
38
52
72
Table of Contents
4
Technical Details
9
Text Input
22
Text Msg
44
Theme Colors
70
Tools
62
Train Words
79
TTY Mode
76
Turning the Phone On and
Off
17
V
Voice Commands
Voice Mail
Voice Memo
Voice Services
Volume
W
World Clock
77
43
64
77
68
66
INDEX
S/W Version
Saved
Schedule
Screen Icons
Screens
Security
Service Alerts
Set NAM
80
12
46
69
72
6:02 PM
105
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising