advertisement
Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
1. To clean the LCD monitor screen:
• Turn off the LCD monitor and unplug the power cord.
• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
2. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage it.
3. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
4. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of any nature.
5. Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside this range may result in permanent damage.
6. Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:
• Monitor-to-PC signal cable is frayed or damaged.
• Liquid spills onto the LCD monitor or the monitor is exposed to rain.
• The LCD monitor or case is damaged.
7. In order to prevent damage to the LCD pannel, do not place the monitor face down on a surface.
Connecting your monitor to a computer
1. Turn off your computer and unplug your computer's power cord.
2. Connect the signal cable to the HDMI (optional) and /or DP (optional) and /or MHL (optional) input socket of the monitor, and the HDMI (optional) and /or DP (optional) and /or MHL (optional) output socket of the graphics card on the computer. Then tighten the thumbscrews on the signal cable connector.
3. Connect the USB Cable(Optional)
Connect the USB 3.0 cable to port for fast charge.
Connect the USB 3.0 cable to port.
4. Insert the monitor power cable into the power port at the back of the monitor.
5. Connect the power adapter and power cord to the monitor, then to a properly grounded AC outlet.
MHL USB
DP
Note: Audio output is only for audio output model. Please check user manual for more instruction.
3
4
1
2
5
External controls
1
2
3
4
5
Power button
Function key
/
Function key
/
Function key
/ X
Function key
/
Turns the monitor on/off.Blue indicates power on. Amber indicates standby/ power saving mode.
a. Press to view Main page. Press again to enter hotkey1 function. b. When the Function Menu is active, press this key to view the basic information for your monitor and current input or reset the custom color settings to the factory defaults.
a. Press to view Main page.Press again to enter hotkey2 function.
b. When the Function Menu is active, press this button to select select scenario mode or game mode .
a. Press to view Main page.Press again to enter Input select function.
b. When the Function Menu is active, this button will quit the OSD. a. Press to view
Main page
the Function Menu.
.Press again to enter next function in b. The single toggle button on the backside of the Display bezel operates like a joystick. To move the cursor, simply toggle the button in four directions. Press the button to select desired option.
Red indicates operable. Grey indicates inoperable.
FreeSync:
It can allow a FreeSync supported graphics source to dynamically adjust display refresh rate based on typical content frame rates for power efficient, virtually stutter free and low-latency display update.
DTS Sound:
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS Sound is a trademark of DTS,
Inc. © DTS, Inc. All Rights Reserved.
Regulations and safety notices
FCC notices
This device has been tested and found to comply with the limits for a Class B digital device pursuant to
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the device and receiver.
• Connect the device into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/television technician for help.
CE declaration of conformity
Hereby, Acer Inc., declares that this LCD monitor is in compliance with the essential requirements and other relevant provisions of EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, and RoHS
Directive 2011/65/EU and Directive 2009/125/EC with regard to establishing a framework for the setting of ecodesign requirements for energy-related product.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables to maintain compliance with EMC regulations.
Notice: Peripheral devices
Only peripherals (input/output devices, terminals, printers, etc.) certified to comply with the Class B limits may be attached to this equipment. Operation with non-certified peripherals is likely to result in interference to radio and TV reception.
Caution
Changes or modifications not expressly approved by the manufacturer could void the user authority, which is granted by the Federal Communications Commission, to operate this product.
In order to prevent damage to the monitor, do not lift the monitor by its base.
Operation conditions
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Notice: Canadian users
CANICES-3(B)/NMB-3(B)
Restriction on Hazardous Substances statement (India)
This product complies with the “India E-waste Rule 2011” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule.
Disposal of waste equipment by user in private household in the European Union
This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information ab ut where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
SPECIFICATION
LCD Panel
Driving system
Size
Pixel pitch
Brightness
Contrast
Viewable angle
(Typical)
Response time
Panel Type
Video
H-Frequency
V-Frequency
Display Colors
Dot Clock
Max. Resolution
Plug & Play
Energy Efficiency Class
*Annual Energy Consumption(Typical)
ON Mode
Power consumption
@200cd/m 2
Sleep Mode
Off
Input Connector
TFT Color LCD
31.5 "W (80cm)
0.36375mm(H) x 0.36375mm(V)
300cd/m 2 (Typical)
100,000,000:1Max. (ACM)
178° (H) 178° (V) (CR≥10)
4ms (GTG,Typical)
VA
Digital Interface
HDMI: 30~180KHz, DP : 180~180KHz, MHL: 30~99KHz
HDMI: 48~144Hz, DP: 48~144Hz, MHL: 23~80Hz
16.7M Colors
180MHz(MHL)/340MHz(HDMI/DP)
HDMI 2/HDMI 1/ DP: 1920X1080@144Hz
MHL: 1920X1080@60Hz
VESA DDCCI/DDC2B
A
59 (kWh) (for HDMI-input Model)
31.5W(typ.)
0.5W(typ.)
0.45W(typ.)
DP (Only DP Model)
Mini DP (Only Mini DP-Input Model)
MHL (Only MHL Model)
HDMI 2.0(Only HDMI 2.0 model)
USB Hub / USB3.0 x 4 (Only USB Hub Model)
Input Video Signal
Speakers(Typical)
Audio
Maximum Screen Size
Power Source
Environmental
Considerations
Dimensions
Weight (N. W.)
Mechanism spec
7W x 2
Audio-Input (Only Audio-Input Model)
Audio-Output (Only Audio-Output Model)
100-240V~, 50/60Hz
Operating Temp: 5° to 35°C
Storage Temp: -20° to 60°C
Operating Humidity: 10% to 85%
722 (W) x 457.5~577.5(H) x 299.9(D)mm
10.5kg Unit (net)
Tilt: -5° to +25°
Swivel: +/- 25°
Height adjustment: 120mm
Pivot: No
Detachable foot stand: Yes
External
Controls:
Functions
Brightness
Contrast
Black Boost
Blue Light
ACM
Super Sharpness
Gamma
Colour Temp sRGB mode
6-axis Hue
6-axis Saturate
Volume
DTS
Over Drive
Aim point
Language
OSD Timeout
Transparency
Refresh rate num
Input
Auto Source
DP Format
Wide Mode
PIP/PBP
Hot Key Assignment
DDC/CI
HDMI Black level
Quick start mode
Power-off USB charge
Game mode
* All specifications are subject to change without notice.
Find manuals and other documents for your Acer product on the official Acer support website.
*Annual energy consumption is calculated using the typical power consumption 4 hours per day, 365 days per year.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project