VersaMax cutsheet.qxd
VersaMax I/O and Control
®
Maximum versatility is the guiding principle behind VersaMax® from GE Fanuc. This compact, extremely affordable
control solution can be used as a PLC, as I/O, and as distributed control. With its modular and scaleable architecture,
intuitive features and unparalleled ease of use, this innovative control family can save machine builders and end
users considerable time and money.
Offering Big PLC Power in a
Small Package. VersaMax CPUs
supply a number of features usually
found only in PLCs with larger
footprints, including up to 64k of
memory for application programs,
floating point math, real-time clock,
subroutines, PID control, flash memory, and bumpless program store.
The serial ports support serial read/write and Modbus
master/slave communications.
An Abundance of Useful I/O Options. GE Fanuc offers
a broad range of discrete, analog, mixed, and specialty
I/O modules. These modules can be freely combined to
create stand-alone I/O stations with up to 256 I/O points
and expanded I/O systems with up to 4,096 I/O points.
The Perfect Match for Today’s Open Systems.
VersaMax gives you the freedom to connect to a wide
variety of host controllers, including PLC, DCS and PCbased control systems by way of Genius®, DeviceNet™,
Profibus-DP™ and Ethernet networks. VersaMax also fully
supports the power and open architecture of GE Fanuc’s
PC Control solutions.
The Ultimate in Cost-effective Control and I/O.
With intuitive diagnostics, hot insertion of modules and
quick connect wiring, VersaMax extends uptime, reduces
engineering and training needs, and dramatically
reduces project life-cycle costs.
A Design that Maximizes Ease of Use. Every aspect
of VersaMax has been carefully refined to accommodate
the user. Snap-together I/O carriers mean that no tools
are required for module installation or extraction. A
convenient rotary switch can be used for setting bus
addresses, reducing programming time. With VersaMax,
you can even address I/O automatically.
Easy Trouble Shooting and Machine Setup Using
a Handheld PDA. CIMPLICITY® Machine Edition Logic
Developer PDA software allows you to interface a Palm®
handheld device to your VersaMax controller. With Logic
Developer PDA, you can monitor/change data, view diagnostics, force ON/OFF, and configure machine setup —
saving you time and increasing productivity.
Ordering Information
Description
Catalog Number
Discrete Input Modules(1)
IC200MDL140
Input 120 VAC (1 Group of 8) 8 Points
IC200MDL631
Input 125 VDC Pos/Neg Logic Isolated 8 Points
IC200MDL141
Input 240 VAC (1 Group of 8) 8 Points
IC200MDL632
Input 125 VDC Pos/Neg Logic Isolated 16 Points
IC200MDL143
Input 120 VAC Isolated 8 Points
IC200MDL635
Input 48 VDC Pos/Neg Logic (2 Groups of 8) 16 Points
IC200MDL144
Input 240 VAC Isolated 4 Points
IC200MDL636
Input 48 VDC Pos/Neg Logic (2 Groups of 8) 16 Points
IC200MDL240
Input 120 VAC (2 Groups of 8) 16 Points
IC200MDL640
Input 24 VDC Pos/Neg Logic (2 Groups of 8) 16 Points
IC200MDL241
Input 240 VAC (2 Groups of 8) 16 Points
IC200MDL643
Input 5/12 VDC Pos/Neg Logic (2 Groups of 8) 16 Points
IC200MDL243
Input 120 VAC Isolated 16 Points
IC200MDL644
Input 5/12 VDC Pos/Neg Logic (4 Groups of 8) 32 Points
IC200MDL244
Input 240 VAC Isolated 8 Points
IC200MDL650
Input 24 VDC Pos/Neg Logic (4 Groups of 8) 32 Points
IC200MDL329
Output 120 VAC 0.5 Amp per Point Isolated 8 Points
IC200MDL741
Output 24 VDC Pos Logic 0.5 Amp per Point with ESCP 16 Points
IC200MDL330
Output 120 VAC 0.5 Amp per Point Isolated 16 Points
IC200MDL742
Output 24 VDC Pos Logic 0.5 Amp per Point with ESCP 32 Points
IC200MDL331
Output 120 VAC 2.0 Amp per Point Isolated 8 Points
IC200MDL743
Output 5/12/24 VDC Neg Logic 0.5 Amp per Point 16 Points
IC200MDL730
Output 24 VDC Pos Logic 2.0 Amp per Point with ESCP 8 Points
IC200MDL744
Output 5/12/24 VDC Neg Logic 0.5 Amp per Point 32 Points
Discrete Output Modules(1)
Catalog Number
IC200MDL740
Output 12/24 VDC Pos Logic 0.5 Amp per Point 16 Points
IC200MDL750
Output 12/24 VDC Pos Logic 0.5 Amp per Point 32 Points
Relay Output Modules(1)
IC200MDL930
Output Relay 2.0 Amp per Point Isolated Form A 8 Points
IC200MDL940
Output Relay 2.0 Amp per Point Isolated Form A 16 Points
Mixed Discrete Modules(1)
IC200MDD840
Mixed 24 VDC Pos Logic Input Grouped 20 Points / Output Relay
2.0 Amp per Point Grouped 12 Points
IC200MDD846
Mixed Output Relay 2.0 Amp per Point Isolated 8 Points /
Input 120 VAC Grouped 8 Points
IC200MDD841
Mixed 24 VDC Pos Logic Input Grouped 20 Points / Output
Grouped 12 Points/HSC/PWM/PT
IC200MDD847
Mixed Output Relay 2.0 Amp per Point Isolated 8 Points /
Input 240 VAC Grouped 8 Points
IC200MDD842
Mixed 24 VDC Pos Logic Output 0.5 Amp Grouped with ESCP
16 Points / Input Grouped 16 Points
IC200MDD848
Mixed Output 120 VAC 0.5 Amp per Point Isolated 8 Points /
Input 120 VAC Grouped 8 Points
IC200MDD843
Mixed 24 VDC Pos Logic Input Grouped 10 Points / Output Relay
2.0 Amp per Point Grouped 6 Points
IC200MDD849
Mixed Output Relay 2.0 Amp per Point Isolated 8 Points /
Input 120 VAC Isolated 8 Points
IC200MDD844
Mixed 24 VDC Pos Logic Output 0.5 Amp Grouped 16 Points /
Input Grouped 16 Points
IC200MDD850
Mixed Output Relay 2.0 Amp per Point Isolated 8 Points /
Input 240 VAC Isolated 4 Points
IC200MDD845
Mixed Output Relay 2.0 Amp per Point Isolated 8 Points /
Input 24 VDC Pos Logic Grouped 16 Points
IC200MDD851
Mixed 12/24VDC Pos Logic Output 0.5 Amp per Point Grouped
16 Points/Input 5/12VDC Pos/Neg Logic Grouped 16 PT
IC200ALG230
Analog Input 12 Bit Voltage/Current 4 Channels
IC200ALG263(6) Analog Input 15 Bit Voltage 15 Channels
IC200ALG240
Analog Input 16 Bit Voltage/Current Isolated 8 Channels
IC200ALG264(6) Analog Input 15 Bit Current 15 Channels
Analog Input Modules(1)
IC200ALG260
IC200ALG261
IC200ALG262
Analog Output Modules
(1)
(1)
I/O Carriers
(6)
Controllers
Power Supplies
Accessories
Analog Input 15 Bit Differential Current 8 Channels
IC200ALG326(6) Analog Output 13 Bit Current 8 Channels
Analog Output 12 Bit Voltage 0-10 V 4 Channels
IC200ALG327(6) Analog Output 13 Bit Voltage 12 Channels
IC200ALG322
Analog Output 12 Bit Voltage ±10 V 4 Channels
IC200ALG328(6) Analog Output 13 Bit Current 12 Channels
(6)
Analog Output 13 Bit Voltage 8 Channels
IC200ALG331
Analog Output 16 Bit Voltage/Current Isolated 4 Channels
IC200ALG430
Analog Mixed 12 Bit Current 4 Input / 2 Output Channels
IC200ALG432
Analog Mixed 12 Bit Voltage ±10 V 4 Input / 2 Output Channels
IC200ALG431
Analog Mixed 12 Bit Voltage 0-10 V 4 Input / 2 Output Channels
IC200CHS001
Barrier Horizontal Style
IC200CHS005
Spring Clamp Horizontal Style
IC200CHS002
Box Horizontal Style
IC200CHS022
Box Vertical Style
(4)
IC200DBI001
IC200EBI001
Network Communication Modules
Analog Input 16 Bit RTD 4 Channels
Analog Input 16 Bit Thermocouple 7 Channels
Analog Output 12 Bit Current 4 Channels
(2)
(3)
IC200ALG620
IC200ALG630
IC200ALG321
IC200CHS003
Network Interface Units
Analog Input 12 Bit Voltage/Current 8 Channels
Analog Input 15 Bit Differential Voltage 8 Channels
IC200ALG320
IC200ALG325
Mixed Analog Modules
(6)
(5)
Connector Vertical Style
IC200CHS025
Spring Clamp Vertical Style
Remote I/O DeviceNet Network Interface Unit
IC200GBI001
Remote I/O Genius Network Interface Unit
Remote I/O Ethernet Network Interface Unit
IC200PBI001
Remote I/O Profibus-DP Network Interface Unit
IC200BEM002
PLC Network Communication Profibus-DP Slave
IC200BEM104
PLC Network Communications AS-i Master
IC200BEM103
PLC Network Communication DeviceNet (Master/Slave)
CPU with 64 Kbyte Configurable User Memory, Two Serial Ports (RS-232 and RS-485)
IC200CPU001
CPU 34 Kbyte Configurable Memory, Two Serial Ports (RS-232 and RS-485)
IC200CPU005
IC200CPU002
CPU 42 Kbyte Configurable Memory, Two Serial Ports (RS-232 and RS-485)
IC200CPUE05
CPU with 64 Kbyte Configurable User Memory, Two Serial Ports (RS-232 and RS-485), 10 MBIT Ethernet Port
IC200PWR001
Power Supply 24 VDC Input
IC200PWR102
Power Supply 120/240 VAC Input with Expanded 3.3 VDC
IC200PWR002
Power Supply 24 VDC Input with Expanded 3.3 VDC
IC200PWR201
Power Supply 12 VDC Input
IC200PWR101
Power Supply 120/240 VAC Input
IC200PWR202
Power Supply 12 VDC Input with Expanded 3.3 VDC
IC200ACC003
EZ Program Store Flash Device for CPUs
IC200ERM001(6) I/O Expansion Receiver Isolated (Up to 750 meters)
IC200CBL001
(6)
IC200ETM001
CPU Programming Cable (RS-232)
IC200ERM002(6) I/O Expansion Receiver Non-Isolated (Up to 15 meters)
I/O Expansion Transmitter for CPU and Network Interface Units
BC646MPH101 Logic Developer PDA software tool with cable adapter.
(1) Requires an I/O carrier for wiring termination.
(2) The DeviceNet network interface unit only supports autoconfiguration
of I/O. Remote I/O configuration tool will be supported in the future.
(3) These modules are for use in CPU systems.
(4) Refer to VersaMax Modules, Power Supplies, and Carriers Manual
GFK-1504 for cables and Interposing Terminal Blocks.
(5) Includes support for EGD and Modbus Ethernet.
(6) Supported by CPUs, Genius, Profibus and Ethernet NIUs only.
GE Fanuc Automation Information Centers
Additional Resources
USA and the Americas: 1-800-GE FANUC
or (434) 978-5100
For detailed technical specifications and product
ordering information, please visit the GE Fanuc
e-catalog at:
Europe, Middle East and Africa: (352) 727979-1
Asia Pacific: 86-21-3222-4555
www.gefanuc.com
© 2004 GE Fanuc Automation, Inc. All Rights Reserved. VersaMax and Genius are registered trademarks of GE Fanuc Automation, Inc.
DeviceNet is a trademark of the Open DeviceNet Vendor Association, Inc. Profibus-DP is a trademark of Profibus International. Palm is
a trademark of Palm, Inc.
GFA-252E
15M 04/04
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement