Data-Fense Secure Raceway System Product Specifications

Data-Fense Secure Raceway System Product Specifications

Data-Fense

Secure Raceway System

Enhanced Protection of Critical Networks

For Government, Financial Institutions, and R&D Facilities

I

nformation technology professionals in the Department of

Defense, government agencies, corporations, R&D facilities, and financial institutions agree that enhanced physical security of wire and cable management systems is crucial to the overall reliability of high assurance networks.

Within the government, physical security of classified networks is typically accomplished using a hardened carrier

Protective Distribution System (PDS) for use as a protected pathway for these critical data networks.

The Data-Fense

Secure Raceway System from

Wiremold/Legrand is designed to address the primary objectives: provide a modular, scalable raceway design that provides enhanced aesthetics above and beyond EMT, minimize the deployment cost and complexity for secure networks or SCIF facilities, and enhance the security of and ability to defend high assurance networks through multiple classification areas.

Data-Fense Secure Raceway System with a DOD approved lock provides security and protection for high assurance networks.

I

Structurally locking base and cover design. Superior protection against overt, covert, and surreptitious attacks.

Eliminates the need for distributed locking mechanisms.

I

Seams located on the front of the raceway. Improves visual detection of attempts to penetrate the raceway along the base or cover. Speeds system inspections.

I

Mounting brackets offset raceway from wall. Provides full 360° visual inspection of the raceway system and speeds system inspections.

I

Limited access. Only access points to the system are through cable pull boxes or access enclosures that are secured by GSA approved hardened padlocks.

I

Fittings overlap. Raceway covers slide onto base assemblies and overlap the “male-ended” fittings providing additional protection at every seam.

I

Universal fittings. 2X2 and 1X1 Raceways have universal tee and elbow fittings reducing the number of components needed and speeding installation time.

Features & Benefits

I

Feeder channels. In addition to the 4 3/4" x 1 3/4" [121mm x 44mm] raceway, Data-Fense Secure Raceway System also includes two sizes of feeder channels with a full selection of fittings that provide a higher level of systemwide protection, are easier to inspect, and are more aesthetically pleasing than conduit.

I

2" [51mm] bend radius. All systems retaining 2" [51mm] bend radius compliance for use with multiple cable types.

I

Aesthetically pleasing. Stocked color is fog white. Custom colors for Data-Fense Secure Raceway System match the colors offered for 4000 Series Raceway.

I

Durable and Secure. Raceway, channels, fittings and enclosures of the Data-Fense Secure Raceway System are constructed of durable heavy gauge steel that meets hardened carrier Protection Distribution System (PDS) guidelines for use in protective pathways for critical data networks.

I

Factory-welded raceway adapters. Enclosures have factory-welded raceway adapters which provide more security and speeds inspection time by eliminating the need to open enclosures for inspections.

NOTE: DoD locks, epoxy, and mounting hardware supplied by others. Secure Solutions Raceway

System evaluated with Sargent & Greenleaf, DoD lock, and 3M Epoxy. Custom colors available.

Consult the factory or your local Wiremold representative.

ED1504R1 – Updated November 2008 – For latest specs visit www.wiremold.com

Data-Fense Secure Raceway System Configurability

While the standard product offering of Data-Fense ™ Secure Raceway System will meet the requirements for most installations, custom-designed fittings and options are also available. Consult the factory or your local

Wiremold/Legrand representative for more information on the custom options available.

Data-Fense Secure Raceway System Header Layout

WSSR-1017FO

WSSR-1SB

WSSE-29-42-10

2" Conduit

T/C Room

WSSR-CB

WSSR-1SB

WSSR-RED

WSSR-MB

WSSR-B

For detailed information on this transition – See “Thru-Wall

Detail with 2" Conduit” on page 3 in Transition Fittings.

WSSR-TWVRTP

WSSR-MSB

WSSR-1018FO

WSSR-TWVR

WSSR-MSC

WSSR-2X2MB

WSSR-2SB

WSSR-2X2E90

WSSR-TWV

WSSR-B1

Data-Fense Secure Raceway System Feeder Layout

T/C Room

WSSR-2X2E90

For detailed information on this transition – See “Work Station

Drop Out Fitting” on page 3 in

Transition Fittings.

WSSR-2X2TEE

2" Conduit

WSSR-2X2MSB

WSSR-212TEE

WSSR-2X2RW

WSSR-2X2MB

WSSR-TWVR

WSSR-1X1E90

WSSR-1X1RW

WSSR-1X1TEE

For detailed information on this transition – See “Thru-Wall

Detail with 2X2Raceway” on page 3 in Transition Fittings.

WSSE-450-7-5AB1

WSSR-1X1E90

WSSR-2-1RED

WSSR-1X1MB

2

Data-Fense Secure Raceway System Obstacle Avoidance Fittings

CORNER BRIDGE VERTICAL OFFSET

Obstructions

WSSR-B

8"

[203mm]

WSSR-CB

Wall Obstruction

WSSR-C

WSSR-MB

WSSR-MB

WSSR-MB

WSSR-VO

WSSR-B

WSSR-C

OFFSET 8

WSSR-C

WSSR-B

WSSR-MB

WSSR-B

Wall Obstruction

Wall Obstruction

WSSR-C

WSSR-OFFSET8

8"

[203mm]

WSSR-C

WSSR-OFFSET8

WSSR-B

45°

9 3/4"

[248mm]

Data-Fense Secure Raceway System Transition Fittings

WORKSTATION DROP OUT FITTING THRU-WALL DETAIL WITH 2" CONDUIT

WSSR-C

WSSR-B WSSR-DO

Back Spacer

WSSR-2CTP

WSSR-DO

WSSR-2X2RW

WSSR-2X2MB

Plastic Bushing

WSSR-DO

WSSE-4-5-4AB

Internal Hole

Template

WSSR-DO

Dropout Body

THRU-WALL DETAIL WITH 2X2 RACEWAY

WSSR-2X2RWTP

WSSR-TWVRTP

WSSR-2X2RW

WSSR-B

WSSR-C

WSSR-TWVTP

WSSR-TWV

2" Conduit

WSSR-TWVR

3

Data-Fense Secure Raceway System Wire Fill Capacity Charts

NOTE: This product is intended for data and communications only.

It is not intended, nor should it be used for power applications.

4 3/4" [121mm] Raceway Wire Fill Capacities for Communications

CABLE

TYPE

CATEGORY/ O.D.

DESIGNATION Inches [mm] 40% FILL

UNSHIELDED

TWISTED PAIR

COAXIAL

FIBER

4-pair, 24 AWG Cat 3

4-pair, 24 AWG Cat 5e

4-pair, 24 AWG Cat 6

4-pair, 24 AWG Cat 6a*

25-pair, 24 AWG

RG6/U

ZipCord

Round 4 Strand Fiber

Round 6 Strand Fiber

0.190

0.210

0.250

0.354

0.410

0.270

0.118 x 0.236

0.187

0.256

[4.8]

[5.3]

[6.3]

[9.0]

[10.4]

[6.9]

[3 x 6]

[4.8]

[6.5]

101

83

58

29

21

50

103

104

55

* Category 6 Augmented cable for 10 gigabit ethernet – max allowed cable diameter per Addendum 11 to

ANSI/TIA-568-B.2.

2" [51mm] Raceway Wire Fill Capacities for Communications

CABLE

TYPE

CATEGORY/ O.D.

DESIGNATION Inches [mm] 40% FILL

UNSHIELDED

TWISTED PAIR

COAXIAL

FIBER

4-pair, 24 AWG Cat 3

4-pair, 24 AWG Cat 5e

4-pair, 24 AWG Cat 6

4-pair, 24 AWG Cat 6a*

25-pair, 24 AWG

RG6/U

ZipCord

Round 4 Strand Fiber

Round 6 Strand Fiber

0.190

0.210

0.250

0.354

0.410

0.270

0.118 x 0.236

0.187

0.256

[4.8]

[5.3]

[6.3]

[9.0]

[10.4]

[6.9]

[3 x 6]

[4.8]

[6.5]

50

41

29

14

10

25

51

52

28

* Category 6 Augmented cable for 10 gigabit ethernet – max allowed cable diameter per Addendum 11 to

ANSI/TIA-568-B.2.

1" [25mm] Raceway Wire Fill Capacities for Communications

CABLE

TYPE

CATEGORY/ O.D.

DESIGNATION Inches [mm] 40% FILL

UNSHIELDED

TWISTED PAIR

COAXIAL

FIBER

4-pair, 24 AWG Cat 3

4-pair, 24 AWG Cat 5e

4-pair, 24 AWG Cat 6

4-pair, 24 AWG Cat 6a*

25-pair, 24 AWG

RG6/U

ZipCord

Round 4 Strand Fiber

Round 6 Strand Fiber

0.190

0.210

0.250

0.354

0.410

0.270

0.118 x 0.236

0.187

0.256

[4.8]

[5.3]

[6.3]

[9.0]

[10.4]

[6.9]

[3 x 6]

[4.8]

[6.5]

11

9

6

3

2

5

12

12

6

* Category 6 Augmented cable for 10 gigabit ethernet – max allowed cable diameter per Addendum 11 to

ANSI/TIA-568-B.2.

4

Catalog No./Item

Data-Fense Secure Raceway System Ordering Information

Description/Specifications Catalog No./Item Description/Specifications

All components of Data-Fense Secure Raceway System are manufactured from 18 gauge galvannealed (satin coat) steel.

WSSR-B

WSSR-MB

Mounting Bracket – Used to attach WSSR-B Raceway Base to mounting surface.

Raceway Base – Includes welded coupling on one end of each section of base.

3 21/32"

[93mm]

4 3/4"

[121mm]

1 3/4"

[44mm]

PART LENGTH

NUMBER Inches [mm]

WSSR-B 120" [3.0m]

WSSR-B1 12" [305.0mm]

WSSR-B2 24" [610.0mm]

WSSR-B5 60" [1.5m]

3"

[76mm]

1 1/2"

[38mm]

WSSR-BNC

Raceway Base – Base section without welded coupling. For connecting a fitting and a section of base with coupling or between two fittings to avoid field cutting.

WSSR-1017FO

Bend Radius Inside 90° Elbow

2" [51mm] bend radius compliant inside 90° elbow.

6 27/32"

[174mm]

3 3/32"

[79mm]

PART LENGTH

NUMBER Inches [mm]

WSSR-BNC

WSSR-B1NC

WSSR-B2NC

WSSR-B5NC

120" [3.0m]

12" [305.0mm]

24" [610.0mm]

60" [1.5m]

WSSR-C

WSSR-1017FOR

5 3/32"

[130mm]

Inside/Outside Elbow – To transition Data-Fense Secure

Raceway System from an inside surface to an outside surface.

Raceway Cover – Includes welded overlap on one end of each section of cover.

PART LENGTH

NUMBER Inches [mm]

WSSR-C

WSSR-C1

WSSR-C2

5'

1'

2'

[1.5m]

[305.0mm]

[610.0mm]

6 27/32"

[174mm]

3 3/32"

[79mm]

5 3/32"

[130mm]

WSSR-CNO

Raceway Cover – Cover section without welded overlap. For connecting a fitting and a section of cover with coupling or between two fittings to avoid field cutting.

WSSR-1017FOE45

Bend Radius Inside Elbow

2" [51mm] bend radius compliant

45° elbow fitting.

4"

[102mm]

PART LENGTH

NUMBER Inches [mm]

WSSR-CNO 5' [1.5m]

WSSR-C1NO 1' [305.0mm]

WSSR-C2NO 2' [610.0mm]

4 11/16"

[119mm]

9 15/32"

[240mm]

45°

3 29/32"

[99mm]

WSSR-CP

Coupling – Used to connect two sections of WSSR-B when two sections meet with no attached coupling or when coupling field cut

WSSR-B sections together.

WSSR-1018FO

Bend Radius Outside Elbow

2" [51mm] bend radius compliant outside 90° elbow fitting.

6 27/32"

[174mm]

4 5/8"

[117mm]

6"

[152mm]

1 5/16"

[33mm]

9 27/32"

[250mm]

5 1/8"

[130mm]

5

Data-Fense Secure Raceway System Ordering Information

(continued)

Catalog No./Item Description/Specifications Catalog No./Item Description/Specifications

All components of Data-Fense Secure Raceway System are manufactured from 18 gauge galvannealed (satin coat) steel.

WSSR-1018FOE45

Bend Radius Outside Elbow

2" [51mm] bend radius compliant

45° elbow fitting.

9 5/32"

[233mm]

4 1/2"

[115mm]

WSSR-CB

Corner Bridge Fitting

2" [51mm] bend radius compliant corner bridge fitting.

29 31/32"

[761mm]

3 25/32"

[96mm]

WSSR-1011FO

WSSR-1011FOE45

WSSR-1015FOH

WSSR-1015FOV

Bend Radius Flat Elbow

2" [51mm] bend radius compliant horizontal 90° elbow fitting.

4"

[101mm]

5 31/32"

[152mm]

10 23/32"

[272mm]

Bend Radius Flat Elbow

2" [51mm] bend radius compliant

45° elbow fitting.

13 7/32"

[336mm]

6 29/32"

[175mm]

45°

4 31/32"

[126mm]

Bend Radius Horizontal Tee

2" [51mm] bend radius compliant horizontal tee fitting.

16 5/8"

[422mm]

10 11/16"

[272mm]

5 15/16"

[151mm]

Bend Radius Vertical Tee

2" [51mm] bend radius compliant vertical tee fitting.

18 5/16"

[465mm]

5 9/32"

[134mm]

WSSR-OFFSET8

WSSR-VO

WSSR-DO

8" [205mm] Offset Fitting

Used for obstacle avoidance.

21 5/8"

[549mm]

9 25/32"

[248mm]

45°

12 27/32"

[326mm]

8 3/32"

[205mm]

45°

Bend Radius Vertical Offset

2" [51mm] bend radius compliant fitting to bridge existing fixtures or conduits.

12 5/32"

[309mm]

4 5/16"

[110mm]

2 19/32"

[66mm]

Vertical Raceway Dropout

Work station drop out fitting from

4 3/4" x 1 3/4" [121mm x 44mm] "

Raceway to 2" x 2" [51mm x 51mm] secure channel.

4"

[102mm]

WSSR-DO1

10 9/32"

[261mm]

6 27/32"

[174mm]

Vertical Raceway Dropout – Drop out fitting from 4 3/4" x 1 3/4"

[121mm x 44mm] Raceway to 1" x

1" [25mm x 25mm] secure channel.

4"

[102mm]

6 27/32"

[174mm]

10 9/32"

[261mm]

6

Data-Fense Secure Raceway System Ordering Information

(continued)

Catalog No./Item Description/Specifications Catalog No./Item Description/Specifications

All components of Data-Fense Secure Raceway System are manufactured from 18 gauge galvannealed (satin coat) steel.

WSSR-EC

End Cap – Used to close off end of Data-Fense Secure

Raceway System.

WSSR-TWH

Horizontal Thru-Wall Fitting

Used to connect one 2" EMT conduit to 4 3/4" x 1 3/4" [121mm x 44mm] Raceway system.

10 9/32"

[261mm]

4 3/4"

[121mm]

6 9/32"

[160mm]

1 3/4"

[45mm]

12 1/4"

[311mm]

WSSR-ETERM

End Termination Unit

End termination box.

10 5/16"

[262mm]

WSSR-TWH-2

Horizontal Thru-Wall Fitting

Used to connect two 2" EMT conduits to 4 3/4" x 1 3/4" [121mm x 44mm] Raceway system.

10 9/32"

[261mm]

6 9/32"

[160mm]

6 9/32"

[160mm]

WSSR-1SB

WSSR-2SB

WSSR-1SB

Cable Access Slack Box

WSSR-1SB is used to install 1'

[305mm] covers. WSSR-2SB is used to install 1' [305mm] and

2' [610mm] covers.

25"

[635mm]

6 9/32"

[160mm]

36 7/8"

[937mm]

6 9/32"

[160mm]

WSSR-TWVR

WSSR-2SB

11 3/16"

[284mm]

Through Wall Fitting

Used to connect one 2" x 2" [51mm x 51mm] Secure Raceway when continuing or feeding system from other side or surface.

16"

[406mm]

3 17/32"

[90mm]

WSSR-MSB

Cable Access Midspan Box

WSSR-MSB is used to install 1'

[305mm] , 2' [610mm], and 5'

[1525mm] covers.

73 3/32"

[1857mm]

6 9/32"

[160mm]

WSSR-TWVRTP

Through Wall Trim Plate

Suitable for use with 2" x 2" [51mm x 51mm] Secure Raceway fittings.

5"

[127mm]

2 5/16"

[59mm]

5"

[127mm]

WSSR-MSC

Midspan Coupling – Used to couple raceway sections crossing hallways, where there is no mounting surface available.

6"

[152mm]

4 29/32"

[125mm]

WSSR-TWV

2 5/32"

[55mm]

Vertical Thru-Wall Fitting

Used to connect one 2" EMT conduit when continuing or feeding system from other side of surface.

16"

[406mm]

19/32"

[15mm]

1 7/16"

[37mm]

7

Data-Fense Secure Raceway System Ordering Information

(continued)

Catalog No./Item Description/Specifications Catalog No./Item Description/Specifications

All components of Data-Fense Secure Raceway System are manufactured from 18 gauge galvannealed (satin coat) steel.

All components of Data-Fense Secure Raceway System are manufactured from 18 gauge galvannealed (satin coat) steel.

WSSR-TWVTP

Trim Plate – Trim plate for 2"

[51mm] conduit coupling on

WSSR-TWV fitting.

2 13/16"

[71mm]

4 3/4"

[121mm]

WSSR-TWV3TP

Through Wall Trim Plate – For use with 3" [76mm] conduit feed.

4 1/32"

[102mm]

5 27/32"

[149mm]

4 3/4"

[121mm]

5 11/32"

[136mm]

WSSR-2CTP

2" Conduit Trim Plate

Used where 2" trade size conduit passes through a wall

4 3/4"

[121mm]

2 3/8"

[61mm]

4 3/4"

[121mm]

WSSR-TRH

Threaded Rod Hanger – For use with WSSR-B.

6"

[152mm]

4 29/32"

[125mm]

WSSR-TWV3

Vertical Through Wall Fitting

Vertical through wall fitting for 3"

[76mm] conduit feed.

16"

[406mm]

19/32"

[15mm]

3 31/32"

[101mm]

2 1/32"

[52mm]

8

Data-Fense Secure Raceway System 2X2 Raceway Ordering Information

Catalog No./Item Description/Specifications

Catalog No./Item Description/Specifications

Data-Fense Secure Raceway System 2X2 Raceway is manufactured from 16 gauge 409 stainless steel. Components of Data-Fense Secure Raceway System 2X2 Raceway are manufactured from 16 gauge galvannealed (satin coat) steel.

WSSR-2X2E45

5 13/16"

[148mm]

WSSR-2X2RW

2" x 2" Raceway – 2" [51mm] raceway. Sold in 10' [3m] lengths.

Bend Radius Compliant 45°

Elbow Fitting

2"

[51mm]

4 7/8"

[124mm]

2"

[51mm]

WSSR-2X2C

WSSR-2X2TEE

2" x 2" Raceway Coupling

Fitting to join together two sections of WSSR-2X2RW.

Universal Tee Fitting – Used to join sections of WSSR-2X2 Raceway and to connect to cabinets, etc.

13 15/16"

[354mm]

2 5/32"

[55mm]

2 5/32"

[55mm]

WSSR-2X2SB

4"

[102mm]

36"

[914mm]

6 1/2"

[165mm]

Cable Access Slack Box – Used to assist in pulling cables in longer raceway runs.

WSSR-2X2VO

6 27/32"

[174mm]

4 9/16"

[116mm]

1 9/32"

[33mm]

5 27/32"

[148mm]

1 31/32"

[50mm]

2X2 Offset Fitting – Used for vertical or horizontal offset.

Contact factory for custom offset requirements.

11 15/16"

[303mm]

45°

6 3/32"

[155mm]

27 15/16"

[710mm]

4"

[102mm]

3 15/16"

[100mm]

WSSR-2X2MB

Mounting Bracket – 2" [51mm] raceway bracket. Used to attach

WSSR-2X2RW to mounting surface.

3 9/16"

[90mm]

2 11/16"

[68mm]

2 1/4"

[57mm]

WSSR-2X2CA90

Conduit or Cabinet Connector

Used to connect 2X2 Raceway to cabinets, 2" conduit etc.

5 3/4"

[146mm]

3 11/32"

[85mm]

3 9/16"

[90mm]

1 17/32"

[39mm]

1 13/32"

[36mm]

WSSR-2X2E90

Universal Elbow – 2" [51mm] bend radius compliant 2" x 2" [51mm x

51mm] raceway elbow fitting.

6 17/32"

[166mm]

3 11/16"

[94mm]

2 9/32"

[58mm]

4 1/4"

[108mm]

2 13/16"

[71mm]

9

Data-Fense Secure Raceway System 2X2 Raceway Ordering Information

(continued)

Catalog No./Item Description/Specifications

Data-Fense Secure Raceway System 2X2 Raceway is manufactured from 16 gauge 409 stainless steel. Components of Data-Fense Secure Raceway System 2X2 Raceway are manufactured from 16 gauge galvannealed (satin coat) steel.

Catalog No./Item

WSSR-2X2RWTP

Description/Specifications

Raceway Trim Plate – Adapter to connect 2" [51mm] raceway to

2" [51mm] EMT conduit or attach to enclosure. Includes lock nut.

WSSR-2X2TWV1C

Through Wall Fitting – Used to backfeed system by connecting

1" trade size conduit to WSSR-2X2RW.

5"

[127mm]

2"

[51mm]

6 7/16"

[163mm]

2 1/32"

[52mm]

5"

[127mm]

13"

[330mm]

1 5/8"

[41mm]

WSSR-RED

WSSR-2X2CA

2X2 Raceway Conduit Adapter

Adapter to connect 2" [51mm] raceway to 2" [51mm] EMT conduit or attach to enclosure. Includes lock nut.

5 3/32"

[129mm]

Channel Reducer Fitting

1 3/4" x 4 3/4" [121mm x 44mm] reduced to 2" x 2" [51mm x

51mm] Raceway.

13 19/32"

[345mm]

6 9/32"

[160mm]

WSSR-2X2CATW

WSSR-2X2EC

WSSR-4-2SPLIT

1 1/2"

[38mm]

3 9/16"

[90mm]

2X2 Raceway Conduit Adapter

Adapter to connect 2" [51mm] raceway to 2" [51mm] EMT conduit for thru-wall applications. Adapter has internal thread that accepts standard conduit reducers.

5 7/32"

[133mm]

3 3/16"

[81mm]

1 21/32"

[42mm]

Raceway End Cap – Used to close off end of WSSR-2X2 Raceway.

3 1/16"

[78mm]

2 17/32"

[64mm]

WSSR-2X2TRH

2X2 Raceway Split Fitting – Splits

4 3/4" x 1 3/4" [121mm x 44mm]

Secure Solution Series Raceway into two 2X2 Raceways.

13 9/16"

[345mm]

3 23/32"

[247mm]

10 9/32"

[261mm]

Threaded Rod Hanger – For supporting 2X2 Raceway where no mounting surface is available. For use with 1/2" or 3/8" threaded rod.

4"

[102mm]

2 1/4"

[57mm]

2"

[51mm]

10

Data-Fense Secure Raceway System 1X1 Raceway Ordering Information

(continued)

Catalog No./Item Description/Specifications Catalog No./Item Description/Specifications

Data-Fense Secure Raceway System 1X1 Raceway is manufactured from 18 gauge 304 stainless steel. Components of Data-Fense Secure Raceway System 1X1 Raceway are manufactured from 16 gauge galvannealed (satin coat) steel.

WSSR-1X1RW

Raceway – 1" x 1" [25mm x 25mm] raceway. Sold in 10' [3m] lengths.

WSSR-1X1TEE

Universal Tee Fitting – To join two sections of WSSR-1X1RW.

12 29/32"

[328mm]

6 9/32"

[159mm]

10'

[3m]

5 27/32"

[148mm]

4 9/16"

[116mm]

1 9/32"

[33mm]

5 13/16"

[148mm]

1 9/32"

[32mm]

2"

[51mm]

1"

[25mm]

WSSR-1X1C

6 1/2'

[165mm]

Raceway Coupling Fitting – To join two sections of WSSR-1X1RW.

WSSR-212TEE

Universal Transition Fitting

Used to transition from WSSR-

2X2RW to WSSR-1X1RW. Epoxied on cover.

13"

[330mm]

6 7/16"

[163mm]

2 1/4"

[57mm]

1 9/32"

[33mm]

1 5/32"

[29mm]

WSSR-1X1MB

WSSR-1X1EC 1" x 1" [25mm x 25mm]

Raceway End cap – Used to close off end of WSSR-2X2RW.

3 1/16"

[78mm]

1 9/32"

[33mm]

WSSR-1X1E90

Mounting Bracket – 1" [25mm] raceway bracket. Used to attach

WSSR 1X1 raceway to mounting surface.

2 9/16"

[65mm]

1 1/4"

[31mm]

1 1/2"

[38mm]

Universal Elbow – 2" bend radius compliant 1X1 raceway elbow fitting.

5 5/16"

[135mm]

2 11/16"

[68mm]

2 9/16"

[65mm]

4"

[102mm]

1 9/32"

[32mm]

WSSR-2-1RED

2 5/32"

[55mm]

Reducer Fitting – 2X2 to 1X1 reducer.

6 1/2"

[165mm]

1 5/32"

[29mm]

11

Data-Fense Secure Raceway System Enclosures Ordering Information

Catalog No./Item Description/Specifications Catalog No./Item Description/Specifications

All the Data-Fense Secure Raceway System Enclosures on this page are manufactured from 16 gauge galvannealed

(satin coat) steel.

WSSE-450-7-5

5"

[127mm]

Secure Work Station Access

Enclosure – 4 1/2" wide x 7" high x 5" deep [114mm wide x 178mm high x 127mm deep] secure work station access enclosure. Solid welded external seams with removable door with built-in padlock hasp. Painted ivory.

Provisions for one commercial faceplate. Requires field-installed feed opening.

WSSE-450-7-5AB1

7"

[178mm]

Secure Work Station Access

Enclosure – 4 1.2" wide x 7" high x

5" deep [114mm wide x 178mm high x 127mm deep] secure work station access enclosure with 1X1

Raceway adapter. Solid welded external seams with removable door, built-in padlock hasp.

Provision for one commercial faceplate. Painted ivory.

10 7/16"

[265mm]

3 1/4"

[95mm]

7"

[178mm] 4 1/2"

[114mm]

WSSE-450-7-5AB Secure Work Station Access

Enclosure – 4 1/2" wide x 7" high x 5" deep [114mm wide x 178mm high x 127mm deep] secure work station access enclosure with 2" x

2" raceway adapter. Solid welded external seams with removable door, built-in padlock hasp.

Provisions for one commercial faceplate. Painted ivory.

WSSE-8-8-5

8"

[203mm]

Secure Enclosure

8" wide x 8" high x 5" deep

[203mm wide x 203mm high x

127mm deep] secure enclosure.

Solid welded external seams with removable door, built-in padlock hasp. Provisions for two commercial faceplates. Painted ivory. Requires field-installed feed opening. 3 1/4" [95mm] depth behind device plate.

8"

[203mm]

10 7/16"

[265mm]

7"

[178mm]

4 1/2"

[114mm]

NOTE: Data-Fense Secure Raceway System Enclosures accommodate the new Ortronics Secure/Keyed pre-polished

LC Multimode Connectors.

Other enclosure configurations are available. Consult the factory or your local Wiremold representative.

WSSE-8-8-5AB

Secure Enclosure

8" wide x 8" high x 5" deep

[203mm wide x 203mm high x

127mm deep] secure enclosure.

Solid welded external seams with removable door, built-in padlock hasp. Provisions for two commercial faceplates and one

2" x 2" [51mm x 51mm] raceway adapter. Painted ivory.

2 9/32"

[58mm]

8"

[203mm]

11 7/16"

[291mm]

8"

[203mm]

12

Data-Fense Secure Raceway System Enclosures Ordering Information

(continued)

Catalog No./Item Description/Specifications Catalog No./Item Description/Specifications

All the Data-Fense Secure Raceway System Enclosures on this page are manufactured from 16 gauge galvannealed

(satin coat) steel.

WSSE-8-8-5AB-PB

Secure Enclosure Pull Box

8" wide x 8" high x 5" deep

[203mm wide x 203mm high x

127mm deep] secure enclosure.

Solid welded external seams with removable door, built-in padlock hasp. Provisions for two commercial faceplates and two

2" x 2" [51mm x 51mm] raceway adapters. Painted ivory.

WSSE-24-16-8

Secure Enclosure

24" wide x 16" high x 8" deep

[610mm wide x 406mm high x

203mm deep].Solid welded external seams with removable hinged door.

3-point L-Handle with built-in padlock hasp. Painted ivory.

16"

[406mm]

14 7/8"

[378mm]

24"

[610mm]

8"

[203mm]

WSSE-8-13-2

8 "

[203mm]

WSSE-24-24-6

Secure Enclosure

24" wide x 24" high x 6" deep

[610mm wide x 610mm high x

152mm deep] Solid welded external seams with removable hinged door. 3-point

L-handle with built-in padlock hasp. Painted ivory.

Secure Work Station Access

Enclosure – 8" wide x 13" high x

2" deep [203mm wide x 330mm high x 51mm deep] secure work station access enclosure. Solid welded external seams with removable hinged door with padlock hasp. Painted ivory.

8"

[203mm]

24"

[610mm]

24"

[610mm]

13"

[330mm]

WSSE-DTFB Work Station Desk Top Fiber

Loop Bracket – Used with

WSSE-8-13-2. Painted ivory.

7 1/4"

[184mm]

4 7/8"

[124mm]

NOTE: Data-Fense Secure Raceway System Enclosures accommodate the new Ortronics Secure/Keyed pre-polished

LC Multimode Connectors.

Other enclosure configurations are available. Consult the factory or your local Wiremold representative.

13

Data-Fense Secure Raceway System Enclosures Ordering Information

(continued)

Catalog No./Item Description/Specifications Catalog No./Item Description/Specifications

All the Data-Fense Secure Raceway System Enclosures on this page are manufactured from 14 gauge galvannealed

(satin coat) steel.

WSSE-29-42-10

42"

[1067mm]

Secure Enclosure

29" wide x 42" high x 10" deep

[737mm wide x 1067mm high x

254mm deep]. Solid welded external seams, side ventilation louvers. Single removable door has

3-point locking L-Handle with secure handle cover. Painted ivory.

Supplied with two 36" [914mm] adjustable shelf standards, one pair of 6" [152mm] shelf brackets, 2 pairs of 4" [102mm] pivoting shelf brackets. All brackets have mounting hole pattern for Ortronics

Clarity ® 19" [482mm] Patch Panels.

WSSE-48-60-16

60"

[1524mm]

Secure Enclosure

48" wide x 60" high x 16" deep

[1219mm wide x 1524mm high x

406mm deep]. Solid welded external seams, front ventilation louvers. Two fixed hinge doors with 3-point locking L-Handles with secure handle covers. Painted ivory. Supplied with two sets of 36"

[914mm] adjustable shelf standards, three (3) 18" [457mm] wide x 10"

[254mm] deep shelves.

48"

[1219mm]

29"

[737mm]

WSSE-36-30-9

WSSR-PAINT

Touch-Up Paint – Touch-up paint to match Data-Fense Secure

Raceway System standard Ivory color. Bottle contains 6 ounces of paint.

Secure Enclosure – 36" wide x

30" high x 9" deep [914mm wide x

762mm high x 229mm deep] Solid welded external seams with double removable hinged doors, Each door has 3-point locking L-Handle with built-in padlock hasps.

Painted ivory.

30"

[762mm]

36"

[914mm]

NOTE: Data-Fense Secure Raceway System Enclosures

accommodate the new Ortronics Secure/Keyed pre-polished

LC Multimode Connectors.

Other enclosure configurations are available. Consult the factory or your local Wiremold representative.

14

Notes

15

Notes

© Copyright 2008 Wiremold / Legrand All Rights Reserved

Wiremold / Legrand

U.S. and International:

60 Woodlawn Street • West Hartford, CT 06110

1-800-621-0049 • FAX 860-232-2062 • Outside U.S. 860-233-6251

Canada:

570 Applewood Crescent • Vaughan, Ontario L4K 4B4

1-800-723-5175 • FAX 905-738-9721

ED1504R1 – Updated November 2008 – For latest specs visit www.wiremold.com

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement