Airstream Avenue 2011 Owner's Manual

Add to my manuals
125 Pages

advertisement

Airstream Avenue 2011 Owner's Manual | Manualzz

INTRODUCTION

The Owners Manual for your new Airstream Motorhome is designed to respond to the most frequent inquiries regarding the operation, function and care of the many systems that make modern motor homing a joy.

The Airstream Avenue Motorhome is integrated into a Express Van, designed and manufactured by Chevrolet. Operation of the Express, its engine, power train, and other related components are discussed in the Express Operator’s

Manual and other literature provided by Chevrolet. As a point of reference, those systems discussed in the Express literature are warranted by Chevrolet or their suppliers.

Airstream realizes our customers possess varying degrees of expertise in the area of repairing and maintaining the appliances in their motorhome. For this reason, the service and trouble-shooting information found in this manual is directed toward those with average mechanical skills. We also realize you may be more familiar in one area than you are in another. Only you know your capabilities and limitations.

We want you to use this manual, and hope you will find the information contained in it helpful, however, should you ever feel you may be “getting in over your head”, please see your dealer to have the repairs made.

The operation and care of component parts such as, refrigerator, furnace, water heater and others are briefly explained in this manual. However, you will also

INTRODUCTION 2013 AVENUE

find the complete manufacturer’s information supplied in a packet included with this manual.

NOTE: Important information regarding the maintenance of your recreational vehicle.

Note: All information, illustrations and specifications contained in the literature are based on the latest product information available at the time of publication approval. Airstream reserves the right to make changes if and when new materials and/or production techniques are developed that can improve the quality of its product, or when material substitutions are necessary due to availability.

We have provided many important safety messages in this manual. Always read and obey all safety messages.

Warning avoided, could result in death or serious injury.

CaUTiOn

indicates a potentially hazardous situation that, if not

indicates a potentially hazardous situation that, if not avoided, could result in minor or moderate injury.

(Optional)

This denotes items that may be an option on all or particular models. Additionally, some optional items can only be included during the manufacturing phase and cannot be added.

The inclusion of optional items does not imply or suggest the availability, application suitability, or inclusion for any specific unit.

NOTICE: Your Chevrolet Operator’s and Warranty Manuals contain important cautions, warnings, operational, and warranty information on the Express and its components. All information in the Chevrolet manual should be reviewed and followed for your safety. The Airstream Avenue

Owner’s Manual may provide additional information and tips on the use of the van as a motorhome, however, no information in the Airstream manual should be interpreted as advice or directions to disregard or void the warnings, cautions, or other information contained in the Chevrolet’s manuals.

Important Safety Precautions

nOTiCE:

used without the safety alert symbol indicates a situation that could result in property damage if not avoided.

You’ll find many safety recommendations on this page and throughout this

INTRODUCTION

manual. The recommendations on the next two pages are the ones we consider to be the most important. Most are covered in depth in later sections of this manual.

Mold (See page D-18)

There are mold and mold spores throughout the indoor and outdoor environment.

There is no practical way to eliminate all mold and mold spores in the indoor environment; the way to control indoor mold growth is to control moisture.

Appliances and Equipment (See LP section on G-1 and Appliances on page I-1)

The appliances (stove, refrigerator, outdoor grills, etc.) and equipment (hot water heater, furnace, etc.) typically operate on propane gas. Propane gas is flammable and is contained under high pressure. Improper use may result in a fire and/or explosion. Be sure to follow all instructions and warnings in this manual (see LP Plumbing section) as well as the specific owners’ manuals of the appliances and equipment.

Towing and Weight Distribution (See section B of this manual) Tire Safety (See pages C-3 through C-8 and the Tire Safety Manual

Addendum)

Weight distribution is an important factor when loading your motorhome. A recreational vehicle with the cargo distributed properly will result in efficient, trouble-free towing. Be sure to follow the instructions in this manual.

Generator Safety (See page H-8)

Properly maintained tires improve the steering, stopping, traction, and loadcarrying capability of your vehicle. Under inflated tires and overloaded vehicles are a major cause of tire failure. Be sure to read the Tire Safety Manual

Addendum included with your owner’s packet.

Never sleep in the vehicle with the genset running without testing the carbon monoxide detector. Test the carbon monoxide detector every time you use the

RV. Primary protection against inhaling carbon monoxide is daily (every eight hour) inspection for visible and audible genset exhaust system leaks.

INTRODUCTION 2013 AVENUE

Chemical Sensitivity

After you first purchase your new recreational vehicle and sometimes after it has been closed up for an extended period of time, you may notice a strong odor and chemical sensitivity. This is not a defect in your recreational vehicle.

Like your home, there are many different products used in the construction of recreational vehicles such as carpet, linoleum, plywood, insulation, upholstery, etc. Formaldehyde is also the by-product of combustion and numerous household products, such as some paints, coatings and cosmetics. However, recreational vehicles are much smaller than your home and therefore the exchange of air inside a recreational vehicle is significantly less than a home.

These products, when new or when exposed to elevated temperatures and/ or humidity, may “off-gas” different chemicals, including formaldehyde. This off-gassing, in combination with the minimal air exchange, may cause you to experience irritation of the eyes, nose, and throat and sometimes headache, nausea, and a variety of asthma-like symptoms. Elderly persons and young children, as well as anyone with a history of asthma, allergies, or lung problems, may be more susceptible to the effects of off-gassing.

Most of the attention regarding chemical off-gassing surrounds formaldehyde.

Formaldehyde is a naturally occurring substance. It is also a key industrial chemical used in the manufacture of the numerous consumer products which we referred to above and used in the construction of recreational vehicles.

Trace levels of formaldehyde are also released from smoking, cooking, use of soaps and detergents such as carpet shampoos, cosmetics, and many other household products. Some people are very sensitive to formaldehyde while others may not have any reaction to the same levels of formaldehyde. Amounts released decrease over time.

Your Airstream motorhome was manufactured using low formaldehyde emitting (LFE) wood products, which is the typical usage in the recreation vehicle industry. Formaldehyde has an important role in the adhesives used to bind wood products used in recreation vehicles. The wood products in your motorhome are designed to emit formaldehyde at or lower than industry guidelines and should not produce symptoms in most individuals.

While LFE wood products typically do not emit formaldehyde at a level that would cause symptoms in most individuals, it is possible, though not likely, for that to occur when the motorhome is not properly ventilated. Ventilation is an essential requirement for motorhome use, for many reasons. Any effects of formaldehyde can be greatly reduced by actions such as opening windows, opening roof vents, running the air conditioner, or some combination thereof. In addition, the emission of formaldehyde by these products naturally decreases rapidly over time. Airstream strongly suggests that you take measures to properly ventilate your motorhome on a regular basis.

INTRODUCTION

Ventilation Do Not Smoke

To reduce or lessen exposure to chemicals from off-gassing it is of utmost importance that you ventilate your recreational vehicle. Ventilation should occur frequently after purchase and at times when the temperatures and humidity are elevated. Remember off-gassing is accelerated by heat and humidity. Open windows, exhaust vents, and doors. Operate ceiling and/or other fans, roof air conditioners, and furnaces and use a fan to force stale air out and bring fresh air in. Decreasing the flow of air by sealing the recreational vehicle increases the formaldehyde level in the indoor air. Please also follow the recommendations contained in Chapter 2 regarding tips to avoid condensation problems. Many of the recommendations contained in Chapter 2 will assist in avoiding exposure to chemicals that off-gas.

Finally, we recommend that you do not smoke inside your recreational vehicle.

In addition to causing damage to your recreational vehicle, tobacco smoke releases formaldehyde and other toxic chemicals.

Medical Advice

If you have any questions regarding the health effects of formaldehyde, please consult your doctor or local health department.

If you have any questions with respect to proper ventilation of your motorhome, please do not hesitate to contact your dealer or Airstream.

Chemical gassing is not a “Defect” in your recreational vehicle and is not covered by the Limited Warranty. Please follow the recommendations in this manual to address this concern.

TABLE OF CONTENTS

A. WARRANTY AND SERVICE

Warranty

Warranty Explanation

Service

Reporting Safety Defects

Maintenance Schedule

Smoke/CO Alarm

LP Gas Detector

Overnight Stop

Extended Stay

Winter Traveling

B. DRIVING

Loading

Weighing The Motorhome

Seat Belts

Trailer Towing & Driving Tips

Towing The Motorhome

Safety Check List

E. EXTERIOR

Cleaning Exterior

Roadside Exterior Features

Curbside Exterior Features

Awning

C. CHEVROLET VAN

Component Identification

Tire/Wheels

Changing a Tire

Wheel Simulator

D. CAMPING

Safety

F. INTERIOR FURNISHINGS

AND ACCESSORIES

Seats

Lounge/Bed, Pedastal Table

Vinyl Floor

Cabinets

Wet bath

Galley Sink

Galley Backsplash

Upholstery

Countertops

Interior Bulbs

Curtains

G. PLUMBING

LP (Liquid Petroleum) Gas

Water System

Water Pump

City Water Hookup

Exterior Shower Hookup

Interior Shower Hookup

Drain Valve Locations

Toilet

Storage and Winterizing

Drainage/Waste System

H. ELECTRICAL

120 Volt System

Energy Management System

GFI Breakers

Generator

12-volt Operation

Battery Disconnect

Monitor System

TV Antenna

Entertainment

Solar Power

I. APPLIANCES

Air Conditioner

Furnace

Refrigerator

Cooktop

Microwave Oven

Water Heater

J. SPECIFICATIONS

Dimensions

Capacities

INDEX

A - 1

APPLY TO YOU.

WARRANTy AND SERVICE

AIRSTREAM MOTORHOME LIMITED WARRANTY

WARRANTY COVERAGE

Airstream Inc. (“Airstream”) warrants that it will repair or replace defects in material or workmanship in any components of a new Airstream motorhome purchased from an authorized Airstream dealer in the United States or Canada for 36,000 miles (57,937 Kilometers) or a period of thirty-six (36) months from the date the motorhome is first delivered to the original retail purchaser. In order to obtain coverage under this Limited Warranty, you must notify an authorized

Airstream dealership or Airstream of the warrantable defect no later than ten

(10) days following expiration of this Limited Warranty. Airstream’s obligation to repair or replace defective materials or workmanship is the sole obligation of

Airstream under this Limited Warranty. Airstream reserves the right to use new or remanufactured parts of similar quality to complete any warranty work.

LIMITATION OF IMPLIED WARRANTIES

IMPLIED WARRANTIES ARISING UNDER APPLICABLE LAW, IF ANY, INCLUDING

BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY

OR FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY LIMITED IN

DURATION TO THE TERM OF THIS LIMITED WARRANTY. ALL OTHER

WARRANTIES, EXPRESS OR IMPLIED, ARE HEREBY DISCLAIMED BY

AIRSTREAM. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG

AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS MAY NOT

WHAT IS NOT COVERED BY THIS LIMITED WARRANTY

This Limited Warranty does not provide coverage for any of the following:

1. Tires, batteries, stereo, television, range/stove, furnace, refrigerator, water heater, microwave, generator, and other materials, parts and components warranted by persons or entities other than Airstream. Please refer to the warranties of component manufacturers for terms and conditions of coverage;

2. Any part or component of the motorhome that was not manufactured or installed by Airstream;

3. Normal deterioration due to wear or exposure, including but not limited to rust, corrosion, oxidation, and cosmetic blemishes;

4. Normal maintenance and service items, including but not limited to light bulbs, fuses, lubricants, sealants and seals, door adjustments, and awning tension;

5. After-market equipment or accessories installed on the motorhome after completion of manufacture by Airstream, or any defects or damage caused by such items;

6. Motorhomes not purchased through an authorized dealer of Airstream motorhomes, and motorhomes purchased directly or indirectly through auction, salvage, repossession, or other non-customary sale means;

AA

A - 1

WARRANTy AND SERVICE

A

7. Defects or damage caused by, in whole or in part, or in any way related to: a. Accidents, misuse (including off-road use), or negligence.

b. Failure to comply with the instructions set forth in any owner’s manual provided with the motorhome.

c. Alteration or modification of the motorhome except such alter- ations or modifications approved in writing by Airstream.

d. Acts of God or other environmental conditions, such as lightning, hail, salt, or other chemicals in the atmosphere.

e. De-icing agents or other chemicals applied to the motorhome.

f. Failure to properly maintain or service the motorhome, inclu- ding but not limited to the maintenance of lubricants, sealants, and seals. g. Condensation and the results of condensation including water damage and the growth of mold or mildew. Mold and mildew are natural growths given certain environmental conditions and are not covered by the terms of this Limited Warranty.

h. Use of the motorhome other than for temporary recreation pur- poses, including but not limited to use of the motorhome for residen tial, commercial, disaster relief, or rental purposes.

i. The addition of weight to the motorhome that causes the motor home’s total weight to exceed applicable motorhome weight ratings, or addition of weight causing improper distribution of the weight of the motorhome.

j. Failure to seek and obtain repairs in a timely manner.

k. Failure to use reasonable efforts to mitigate damage caused by defects.

l. Failure to properly ventilate the motorhome.

m. Improper electric power supply or improper vehicle hookup to other facilities.

n. Acts or omissions of any person or entity other than Airstream.

DISCLAIMER OF INCIDENTAL AND CONSEQUENTIAL DAMAGES

Airstream hereby disclaims any and all incidental and consequential damages arising out of or relating to the motorhome, including expenses such as transportation to and from vehicle dealerships and Airstream repair facilities, loss of time, loss of pay, loss of use, inconvenience, commercial loss (including lost profits), towing charges, bus fares, vehicle rental, service call charges, gasoline expenses, incidental charges such as telephone calls and facsimile transmissions, and expenses for lodging. This disclaimer is independent of any failure of the essential purpose of any warranties provided with the motorhome, and shall survive any determination that a warranty failed of its essential purpose. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

OBTAINING WARRANTY SERVICE

In order to obtain warranty service under this Limited Warranty, the owner must

A - 2 A - 3

A - 2

WARRANTy AND SERVICE

do all of the following:

1. Owner and dealer representative must complete, sign, and return the Customer Performance Checkout within 10 days from delivery of the motorhome;

2. Notify Airstream or one of its authorized, independent dealers, of any claimed defect within the warranty period or 10 days thereafter;

3. Provide notification of a defect within 10 days of discovery of that defect; and

4. Promptly return the motorhome to an authorized Airstream dealer or Airstream for repairs.

Airstream may direct you to an authorized Airstream dealer, or may request that you bring your motorhome to the Airstream factory in Jackson Center, Ohio for repairs.

Airstream does not control the scheduling of repairs at its authorized Airstream dealers, and repairs at the Airstream factory may not be immediately available.

Therefore, you may encounter delays in scheduling repairs and/or completion of repairs. All costs associated with transporting the motorhome for any warranty service shall be the sole responsibility of the owner.

If you believe a defect covered by this Limited Warranty still exists after an attempted repair by an authorized Airstream dealer, you must contact Airstream at the following address, specifying:

1. The complete serial number of the motorhome;

2. The date of original purchase and the date of original delivery;

3. The name of the selling dealer; and

4. The nature of the problem and the steps or service which have been performed.

AIRSTREAM, INC. 419 West Pike Street P.O. Box 629 Jackson Center, Ohio

45334-0629 Attention: Owner Relations Department

DEALER REPRESENTATIONS EXCLUDED

The entire Limited Warranty provided by Airstream is set forth herein. Airstream will not be responsible for any additional representations or warranties made by any person or entity other than Airstream, and Airstream’s obligations are solely as set forth in the terms and conditions of this Limited Warranty.

WARRANTY TRANSFER

This Limited Warranty is transferable to subsequent owners for the remaining duration of the warranty period, upon approval from Airstream. Transfer of this

Limited Warranty will only be approved by Airstream upon all of the following:

(1) Airstream’s receipt of a completed transfer application form; (2) the payment of a $250.00 processing fee to Airstream; and (3) the completion of an inspection of the condition of the motorhome, at the owner’s expense, by an

AA

A - 3

WARRANTy AND SERVICE

A

authorized Airstream dealer in accordance with Airstream’s required procedure and Airstream’s receipt of a written report as to the results of such inspection.

Transfer application forms are available from your dealer or Airstream’s Service

Administration Department.

CHANGES IN DESIGN

Airstream reserves the right to make changes in design and improvements upon its products from time-to-time, without imposing upon itself any obligation to install additional features in your motorhome.

fore claiming rights conferred by 15 USC section 2310 (Uniform Commercial

Code) or Civil Code section 1793.22(b) (Song-Beverly Warranty Act). You are not required to use the program if you choose to seek redress by pursuing rights and remedies not created by those laws.

Members of the armed forces who purchased the vehicle in California, or who were stationed in or a resident of California at the time of purchase (regardless of state of purchase) or who are stationed in California at the time of application to this program may utilize the CAP-RV program.

CONSUMER ARBITRATION PROGRAM

Airstream Inc. participates in the Consumer Arbitration Program for Recreation

Vehicles (CAP-RV). This third-party dispute resolution program is available, at no charge to you, to settle unresolved warranty disputes for recreation vehicles.

This dispute resolution program reviews eligible product and service related complaints involving warranty covered components.

To find out more about this program, or to request an application/brochure, please call the Arbitration Administration office toll-free 800.279.5343.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY

ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

AIRSTREAM, INC.

419 West Pike Street

P.O. Box 629

Jackson Center, OH 45334-0629

Tele: 937-596-6111

Fax: 937-596-6539

For recreation vehicles purchased in the State of California: The CAP-RV program operates as a certified mechanism under the review of the California

Arbitration Certification Program. You must utilize the arbitration program be-

A - 4 A - 5

A - 4

WARRANTy AND SERVICE

WARRANTY EXPLANATION

Accident

Along with your new Airstream motorhome, you have purchased the Airstream

Limited Warranty. Read your Limited Warranty carefully. It contains the entire agreement with respect to Airstream’s obligation on the Limited Warranty on your new vehicle. The terms of the Limited Warranty, and only those terms, will define Airstream’s responsibility. When you receive your Limited Warranty, file it for safekeeping.

Damage caused by accident is usually visible, and we strongly urge our dealers and customers to inspect the motorhome upon delivery for any damage caused by accident while being delivered to the dealer, or while it is on the dealer’s lot. Damage of this nature becomes the dealer’s or your responsibility upon acceptance of the motorhome. GLASS BREAKAGE, whether obviously struck or mysterious, is always accidental and covered by most insurance policies.

AA

Upon proof of purchase date to any Airstream Dealer Service Center, defects in materials or workmanship will be repaired or replaced without cost to the owner for a period of thirty six (36) months from the original purchase date, or 36,000 miles (57,937 kilometers), whichever occurs first. Written warranties of some manufacturers of components of the motorhome will be honored by Airstream for the duration on that manufacturer’s warranty.

Abuse

Lack of customer care and/or improper maintenance, including failure to comply with the instructions and terms of the all owner’s manuals and booklets, or failure to heed proper vehicle operation shown by the dash instruments is not covered by warranty.

The Airstream Limited Warranty Excludes: Exposure

Normal Wear:

Items such as curtains, upholstery, floor coverings, window and vent seals may show wear within the three year/36000 mile Limited Warranty period depending upon the amount of usage, weather, and atmospheric conditions.

Deterioration by sunlight is possible to such items as tires, curtains or upholstery. Steel or metal surfaces are subject to the elements, causing rust and corrosion that is normal and beyond the control and responsibility of Airstream.

A - 5

WARRANTy AND SERVICE

Appearance manual Introduction section to address this concern.

A

Paint and appearance items that show imperfections, damage to interior and exterior surfaces resulting from abrasion, collision or impact, and broken window glass is not covered by the Airstream Limited Warranty and should be brought to the attention of your Airstream dealer at the time of delivery and during pre-delivery inspection.

Overload

Overload damage due to loading beyond capacity or to cause improper balance is not covered by the Airstream Limited Warranty. The Airstream motorhome is engineered to properly handle any normal load. There are limits to the amount of load that can be safely transported depending upon speed and road conditions. If these limits have been exceeded, the Airstream Limited Warranty will not cover resulting damage. For additional information on the load capacity of your motorhome, consult your Chevrolet and Airstream Owner’s Manuals or gross vehicle weight rating plate.

Chemical Gassing

Chevrolet Van

Airstream, Inc., does not accept any responsibility in connection with any of its motorhomes for the Chevrolet Van or its components. The Chevrolet Van and its components are covered by Chevrolet Warranties as explained by

Chevrolet literature provided with each motorhome. Your Chevrolet Van and its components are pre-checked by its manufacturer before delivery to Airstream.

All service to the Chevrolet Van and its components must be performed by

Chevrolet designated service points according to the manufacturer’s warranty and service policies. Chevrolet literature is supplied with each Airstream motorhome. The literature gives important information concerning its warranty coverage, maintenance, and operation.

Warning

: Your Chevrolet Van Operator’s and Warranty

Manuals contain important cautions, warnings, operational, and warranty information on the Express and its components. All information in the

Chevrolet manual should be reviewed and followed for your safety.

Chemical gassing is not a “Defect” in your recreational vehicle and is not covered by the Limited Warranty. Please follow the recommendations in this

The Airstream Avenue Owner’s Manual may provide additional information and tips on the use of the van as a motorhome, however, no information, in whole

A - 6 A - 7

A - 6

WARRANTy AND SERVICE

or in part, in any Airstream manuals should be interpreted as advice or directions to disregard or void the Warnings, Cautions, Notices, or other information contained in the Chevrolet manuals.

dealer if you need service.

Other Exclusions

Occasionally dealerships change, or new dealers are added who may not appear on this list. For this reason, it is suggested that you contact your local dealer from time to time and bring your list up to date or go to www.airstream.

com and use the dealer locator. Airstream customer relations can also supply you with an up to date list.

AA

Tires, batteries, and the generator are serviced by their respective manufacturers and will be handled by their service centers according to the terms of their written policy. Any warranty forms from these manufacturers should be completed promptly, preferably at time of purchase.

ALL SERVICE CENTERS OPERATE ON AN APPOINTMENT BASIS FOR

THE UTMOST EFFICIENCY.

Service

Before leaving the factory, each and every vital part of the motorhome is tested for performance. Each test is signed and certified by an inspector. After the motorhome arrives on your dealer’s lot all of these vital parts and systems are again tested. When you take delivery of your new motorhome you will receive a complete Customer Performance Checkout.

When you require service from the Airstream Factory Service Center or a

Certified Dealer Service Center, please contact the service manager for an appointment, and kindly inform him if you are unable to keep the appointment date or wish to change it. Service may be arranged at the Airstream Factory

Service Center by contacting the Service Coordinator at:

Major service under your Airstream Limited Warranty is available through our nationwide network of Airstream Dealer Service Centers. An up-to-date list of

Dealer Service Centers has been provided with your new motorhome. This list is current as of the date of publication. Please contact an authorized Airstream

Airstream Factory Service Center

P.O. Box 629

419 W. Pike Street

Jackson Center, Ohio 45334-0629

Phone: 937-596-6111 Fax: 937-596-6802

A - 7

WARRANTy AND SERVICE

REPORTING SAFETY DEFECTS

A

If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway

Traffic Safety Administration (NHTSA) in addition to notifying Airstream Inc..

If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, NTHSA cannot become involved in individual problems between you, your dealer, or Airstream Inc.

To contact NHTSA, you may either call the Vehicle Safety Hotline toll-free at

1-888-327-4236 (TTY: 1-800-424-9153); go to http://www.safercar.gov; or write to: Administrator, NHTSA, 1200 New Jersey Avenue, S.E., Washington,

DC 20590.

You can also obtain other information about motor vehicle safety from http:// www.safercar.gov.

A - 8 A - 9

A - 8

WARRANTy AND SERVICE

MAINTENANCE SCHEDULE EVERY 12,000 MILES OR 1 YEAR

Warning

: FAILURE TO MAINTAIN YOUR COACH CAN CAUSE

PREMATURE AND UNEXPECTED PARTS BREAKAGE AND/OR ERRATIC

OPERATION THAT MAY BE HAZARDOUS. SERIOUS INJURY COULD

RESULT FROM FAILURE TO HEED THIS WARNING.

LP Tank

Sealer

APPLIANCES

EVERY 1,000 MILES OR 60 DAYS

Smoke/CO Alarm

GFI Circuit Breaker

Test weekly and replace battery as required.

Test and record.

Clean, neutralize and coat terminals with petroleum jelly.

Check and reseal, windows, lights, and vents. Reseal with Bostik urethane sealant or equivalent as needed.

Appliances have maintenance schedules and advice in their respective

Owners/Operation Manuals. These manuals are included in the owner’s packet given to you by your dealer. Please become familiar with and follow all information in these manuals.

EVERY 5,000 MILES OR 90 DAYS

AUTOMOTIVE

LPG Regulator

Roof Vent

Living Area Windows

Check bottom vent for obstructions

Lubricate with light household oil

Lubricate with light household oil

See the Chevrolet Operators Manual and Maintenance Logbook for

Automotive Maintenance schedules and pre-trip inspections.

AA

EVERY 10, 000 MILES OR 6 MONTHS

Smoke/CO Alarm Vacuum exterior only.

A - 9

A

WARRANTy AND SERVICE

MAINTENANCE RECORDS

DATE DEALER SERVICE PERFORMED DATE DEALER SERVICE PERFORMED

A - 10 B - 1

A - 10

DRIVINg

LOADING

One of the most critical aspects of safely operating a motorhome is knowing the weights involved and where they are placed. The first thing to determine is how much cargo is being loaded and confirming that it is within the capacities of the equipment being used. Determining WHERE that load is placed is critical to the way your rig will handle on the road.

The Cargo Carrying Capacity tag shown below is installed on every motorhome and can be found on the inside of the passenger door on your vehicle.

MOTOR HOME OCCUPANT AND CARGO CARRYING CAPACITY

VIN #################

THE COMBINED WEIGHT OF OCCUPANTS AND CARGO SHOULD NEVER EXCEED

XXX kg or XXX lbs

Safety belt seating capacity: XXX

CAUTION

A full load of water equals XXX kg or XXX lbs of cargo @ 1 kg/L (8.3 lb/gal) and the tongue weight of a towed trailer counts as cargo

B

Do not try to guess what your recreational vehicle weighs loaded. Load your

RV including water, propane, etc and take it to a public scales. Weigh each axle of your vehicle. Refer to your axle weight and tire limits to see if you are within a safe range. Total all axle weights and make sure you are below the

GVWR. If you are not overloaded, make sure your load is balanced. Do not load too much on one side. A balanced load is much easier to tow or drive.

Also, front to back balance is also important. Step back and look at your recreational vehicle. Make sure that there is not too much weight on the hitch or on the rear of the RV. Be sure to secure all items. Loose items can cause damage and be a safety issue if not properly secured.

To arrive at the “THE COMBINED WEIGHT OF OCCUPANTS AND CARGO

SHOULD NEVER EXCEED” number, Airstream weighs the vehicle as finished and adds the weight of full tanks of liquid propane and chassis fuel. That number is subtracted from the Gross Vehicle Weight Rating (GVWR) of the motorhome and listed on the tag, The total weight of any and all cargo, including but not limited to dealer or customer modifications or additions, fluids (freshwater, holding, and water heater tanks), food, clothes, tools, the tongue weight of a towed trailer or vehicle, and passengers should never exceed the number listed while the motorhome is in transit.

The “Safety Belt Seating Capacity” is the number of passengers that seat belts are provided for.

B - 1

DRIVINg

B

The “A full load of water equals” number is arrived at by multiplying the fresh water tank and water heater capacities by 1Kg/L or 8.3 lb/gl.

When loading the vehicle it is important to keep the Gross Vehicle Weight

Rating, Gross Axle Weight Ratings, Tire Weight Ratings (listed on the vehicle

Tire Information Placard), and the Cargo and Occupant Capacity in mind and not to exceed these specifications. Your safety depends on not overloading the motorhome, motor home axles, and tires. See the specification section for the weight rating list of these items.

Gross Vehicle Weight (GVW): comprises weight of vehicle including tools, spare tire, installed accessories, passengers, cargo, and trailer tongue weight. It must never exceed the GVWR.

Gross Axle Weight Rating

(GAWR) is a maximum permissible axle weight.

Gross Trailer Weight

(GTW) is a maximum permissible trailer weight to be towed.

Trailer Tongue Weight Rating

(TWR) is the maximum permissible weight of the trailer tongue. This counts as cargo when loading a motorhome.

WEIGHING

To determine the actual weight of your vehicle with personal cargo and water, it must be weighed on scales as you plan to travel. The most common scales are those used by states to weigh trucks used along the highway. In rural areas, grain elevators and cement outlets are a good source and another would be a gravel pit. Note: Weighing instructions for this motorhome are explained on the next page. If you have trouble locating scales, a call to your State Highway

Patrol will usually find them very cooperative in assisting you.

Vehicle and Trailer Weights and Ratings Definitions

Gross Vehicle Weight Rating

(GVWR) is the maximum permissible weight of the motorhome.

NOTE: Check the Chevrolet manual for all weights and the tire information placard location. Check the Chevrolet manual for weight and tire information placard location.

Procedure for Weighing A RV (See chart on next page).

Vehicle should be weighed loaded as you normally travel.

1. Fill in first row from Specification Section of this manual.

2. Weigh vehicle as shown in row 2 (Scale Weight) and fill in blanks.

3. Weigh one side of vehicle as shown In Individual Wheel Position Weight.

4. Calculate other side as shown in last row.

Information for line 1 is located in the specification section in this manual.

B - 2 B - 3

B - 2

DRIVINg

Front Axle GAWR

SCALE WEIGHT

GVWR Rear Axle GAWR GCWR - GVW

Optional Tow Weight

___________

STEP 1

Front Axle GAW

___________

STEP 2

INDIVIDUAL WHEEL POSITION WEIGHT

GVW

___________

STEP 3

Rear Axle GAW

___________

STEP 3a

Tow Weight minus

Weight of Trailer or Vehicle Towed

GAWR = Gross Axle Weight Rating

GVWR = Gross Vehicle Weight Rating

GCWR = Gross Combination Weight Rating

B

___________

STEP 4

Left Front Wheel

Position

Calculated

___________

Right Front Wheel

Position

Step 1 minus Step 4

___________

STEP 5

Left Side

(Total LF + LR)

Calculated

___________

Right Front

(Total RF + RR)

Step 2 minus

Step 5

___________

STEP 6

Left Rear Wheel

Position

Calculated

___________

Right Rear

Wheel Position

Step 3 minus Step 6

B - 3

DRIVINg

WEIGHT DISTRIBUTION

B

Motorhomes have fresh water and wastewater tanks, a water heater, and storage areas. It gives you great flexibility in loading. With flexibility comes responsibility. If you want to load down all the storage compartments, the amount of fluids may have to be reduced. It’s a trade off, so plan wisely. Distribute your additional cargo as evenly as possible with the heaviest objects located as low as possible. safety belts firmly attached while the motorhome is in transit. The driver should adjust his seat so that he is able to reach all controls easily with the belt on, and be able to use all the travel on the foot brake. Seat belts should be placed as low as possible around the hips to prevent sliding out from under them in case of accident. This places the load of the body on the strong hipbone structure instead of around the soft abdominal area. Two people should never try to use the same seat belt in the rear lounge.

Do you really want to carry a full freshwater tank to a RV park 1,000 miles away and then hook up to a city water supply? Even if you’re going to the

“boondocks”, you can usually fill your water tank shortly before entering the area. Just reducing your load by 10 gallons of water lets you carry an awful lot of fishing and camping gear.

SAFETY

The driver and front passenger seat belt buckle operation is explained in the

Chevrolet manual. The seat belt operation for second row captains chairs and the outer seating of the rear lounge is the same.

The center seat belt of the rear lounge is secured by inserting the male end into the female buckle until the buckle is secured. To release the buckle press the release button on the female end.

Release Button

SEAT BELTS

Federally approved seat belts are provided for the use of the driver, the right front passenger, the second row captains chairs, and the rear lounge. Most states require by law that all passengers in a motor vehicle use seat belts while in transit. It is strongly recommended that all occupants remain seated with their

Warning

: Become familiar with and follow all directions, advice, and warnings pertaining to seats, seat belt operation, and restraint systems, provided in the Chevrolet Operator’s Manual. Do not allow passengers to ride anywhere in the motorhome except in seats that are equipped with approved seat belts.

B - 4 B - 5

B - 4

DRIVINg

Warning

: Children must be secured in a Federally Approved

Child Restraint Device. Failure to use proper restraints while in transit can result in severe or fatal injuries. Never place an infant seat that faces to the rear on the front passenger seat. Never place an unbelted infant seat on any seat while in transit.

dangEr

: Drinking or taking drugs and driving is a very dangerous combination. Even a small amount of alcohol or drugs can affect your reflexes, perception, and judgment. The possibility of a serious or even fatal accident is sharply increased when you drink or take drugs and drive.

Never drink and/or take drugs and drive or allow anyone to drive after drinking and/or taking drugs.

B

Child restraint devices are designed to be secured with lap or lap/shoulder belts. All instructions supplied by the restraint manufacturer must be followed.

Statistics have shown children are safer when properly restrained in a rear seating position than in a front seating position.

TRAILER TOWING AND DRIVING TIPS

(Some text is partial excerpts from Chevrolet Operators Manual)

Often the children traveling in motorhomes are grandchildren. There are times when our love for grandchildren makes us hesitate to properly supervise their actions. Don’t hesitate when it comes to their safety. Make sure they are properly restrained.

CHILDREN HAVE LOVED ONES TOO.

IF YOU WON’T BUCKLE UP FOR YOURSELF, BUCKLE UP FOR THEM.

Warning

: Failure to use proper equipment and driving techniques can result in a loss of vehicle control when towing a trailer.

Improper towing or failure to follow the instructions contained in this section can result in serious injury. Follow the guidelines below carefully to assure safe trailer operation. Ask your authorized Chevrolet or Airstream dealer if you require an explanation of information contained in the manuals.

Warning

: Do not tow a trailer at all during the first 500 miles

(800 km) the new vehicle is driven. The engine, axle or other parts could be

B - 5

DRIVINg

B

damaged. Then, during the first 500 miles (800 km) that a trailer is towed, do not drive over 50 mph (80km/h) and do not make starts at full throttle. This helps the engine and other parts of the vehicle wear in at the heavier loads.

Use the Tow/Haul button when necessary. Details are covered in the Chevrolet

Operators Manual.

Trailer Hitches

Warning

: It is important that the vehicle never exceed any of

its weight ratings. These specifications are listed in both the Airstream and Chevrolet Manuals. When towing trailers, it is very important for the vehicle to be properly equipped. Information on trailer hauling capabilities and special equipment required may be obtained from your Chevrolet and/ or Airstream dealer.

Units have hitches and wiring installed. The 7- way connector is used for lights and charge line on a trailer. For further information, please see your authorized

Chevrolet or Airstream Dealer.

Loading a Trailer

When loading a trailer, you should observe that neither the permissible GTW

(Gross Tongue Weight), nor the trailer GVWR are exceeded.

The bumpers on your vehicle are not designed for use with clamp type hitches.

Do not attach rental hitches or other bumper type hitches to them. To reduce the possibility of damage, also remember to remove the hitch ball adapter from the receiver when not in use.

Since this vehicle is designed and intended primarily as a load-carrying vehicle, towing a trailer will affect handling, acceleration, braking, durability and fuel economy. Maximum safety and satisfaction depends upon proper use of correct equipment and avoiding overloads and other abusive operation.

Maximum permissible values are listed on the safety compliance certification labels for the vehicle and for the trailer to be towed. For their location, see the

Chevrolet Operators Manual. The lowest value listed must be selected when determining how the vehicle and trailer are loaded.

To assist in attaining good handling of the vehicle/trailer combination it is important that the tongue weight be maintained at approximately 10%-15% of the total loaded trailer weight, but not to exceed the hitch rating. Tongue loads can be adjusted by proper distribution of the load in the trailer, and can be checked by weighing separately the loaded trailer and then the tongue.

B - 6 B - 7

B - 6

DRIVINg

The tongue weight (TW) at the hitch ball must be added to the GVW to prevent exceeding the Chevrolet GVWR or rear GAWR.

Attaching a Trailer

When towing trailers, motorhome tires should be inflated to the highest pressures shown on the Chevrolet Tire Information Placard for cold tires. The Cargo

Carrying Capacity (CCC) of this vehicle is reduced by the amount that equals the trailer tongue load on the trailer hitch.

Please observe maximum permitted trailer dimensions (weight and length).

Most states and all Canadian provinces require safety chains between your tow vehicle and trailer. The chains should be crisscrossed under the trailer tongue.

It must be attached to the hitch receiver, and not to the vehicles bumper or axle. Be sure to leave enough slack in the chains to permit turning corners.

B

Checking Weights of Vehicle and Trailer

Most states and all Canadian provinces required a separate brake system for towing trailers.

To assure that the tow vehicle and trailer comply with the maximum permissible weight limits and to know the actual weights, have the loaded vehicle-trailer combination (tow vehicle including driver, passengers, and cargo and trailer fully loaded) weighed on a commercial scale as explained earlier in this section.

Also check the vehicles front and rear axle weights and tongue weight. The values as measured must not exceed the Chevrolet weight ratings listed on vehicle information placards and in the Chevrolet manual. These ratings are also listed in the Specification section of this manual, page J-1.

NOTE: Check the Chevrolet manual for all weights and tire information placard locations.

Warning

: The towing vehicle’s braking system is rated for operation at GVWR (GROSS VEHICLE WEIGHT RATING), NOT at the GCWR

(GROSS COMBINED WEIGHT RATING). A separate functioning brake system is required for any towed vehicles or trailers weighing more than

1000 lbs. (450 kg) when fully loaded. NEVER exceed the GVWR (GROSS

VEHICLE WEIGHT RATING), or the GAWR (GROSS AXLE WEIGHT RATING) specified on a motorhome certification label. Also NEVER, exceed the weight ratings of trailer hitch installed on a motorhome. Failure to heed any part of the warning could result in loss of control of the motorhome and towed vehicle or trailer and may cause an accident and serious injury.

B - 7

DRIVINg

For specific towed vehicle braking requirements, consult the Chevrolet

Operator’s manual.

If the trailer has brakes using an electric brake controller, start your vehicle and trailer moving slowly, and then apply the brakes manually using the brake controller to be sure the brakes are working properly.

B

The provided vehicle electrical wiring harness for trailer towing has a brake signal wire for hookup to a brake controller. Most states and all Canadian provinces require a brake away switch on trailers with a separate brake system.

The switch activates the trailer brakes in the possible event that the trailer might separate from the tow vehicle. Please consider using a trailer sway control system. For further information, see your authorized Chevrolet or Airstream dealer.

When towing a trailer, check occasionally to be sure that the load is secure, and that lighting and trailer brakes (if so equipped) are functioning properly. Always secure items in the trailer to prevent load shifts while driving.

Take into consideration that when towing a trailer, the handling characteristics are different and less stable from those when operating the vehicle without a trailer. It is important to avoid sudden maneuvers.

Towing a Trailer

There are many different laws, including speed limit restrictions, having to do with trailer towing. Make sure that your vehicle -- trailer combination will be legal; not only for where you reside, but also for where you’ll be driving. A good source for this information can be the State Attorney General, State Police, or local authorities.

The vehicle and trailer combination is heavier, and therefore is limited in acceleration ability, and requires longer stopping distances. It is more prone to reacting to side wind gusts, and requires more sensitive steering input.

In order to gain skill and an understanding of the vehicles behavior, you should practice turning, stopping and backing up in an area which is free from traffic.

Before you start driving with a trailer, check the trailer’s hitch, brake away switch, safety chains, electrical connections, lighting and tires. Also, adjust the mirrors to permit unobstructed view beyond rear of trailer.

If possible, do not brake abruptly, but rather engage the brake slightly at first to permit trailer to activate its brake. Then increase the braking force.

We want every owner to be a safe and courteous driver. A few hours of towing

B - 8 B - 9

B - 8

DRIVINg

practice in a large empty supermarket lot will make pulling your trailer over the road much easier. Line out two corners for left and right turns. You may also use these corners to practice backing and parking. must also allow for the length of the trailer when returning to the right hand lane.

Tracking

DURING PRACTICE OBSERVE THAT THE TRACKS MADE BY THE TRAILER

WHEELS ARE DISTINCTLY DIFFERENT FROM THOSE MADE BY THE TOW

VEHICLE.

B

Studying this will make it easier for you to correct mistakes. Consider truck or trailer type fender or door grip rear view mirrors for maximum visibility. In most states the law requires them.

After thoroughly inspecting your hitch, brakes, and tires you should be ready to tow. Check traffic, signal that you are about to pull away, and start slowly. Look often in your mirrors, and observe the action of the trailer, then carefully move into the proper lane of traffic. Remember that the trailer wheels will not follow the path of the tow vehicle wheels; therefore, WIDER TURNS ARE NECESSARY

WHEN TURNING TO THE LEFT OR TO THE RIGHT.

On a two-lane road, cars may be lining up behind you because you are traveling at a lower speed. It is both courteous and sensible to signal and pull over at the earliest safe opportunity, and let them pass.

ON FREEWAYS OR EXPRESSWAYS, try to pick the lane you want and stay in it. Always maintain plenty of space between you and the car ahead, at least the length of the tow vehicle plus trailer for every ten miles per hour. Remember that in order to pass another vehicle you will need longer to accelerate. You

The BRAKE CONTROLLER (if so equipped) is activated when you apply the brakes of the tow vehicle. Your tow vehicle brakes will automatically apply the trailer brakes first when properly adjusted. This will help keep your tow vehicle and trailer in a straight line and make you stop as if you were driving the tow vehicle alone. If swaying or swerving should occur, briefly operating the controller separate from the vehicle brakes may help correct the situation.

B - 9

DRIVINg

B

Practice this maneuver on a clear highway. Don’t wait for an emergency then grope for the controller.

trailer back into a single line. Chains do not help trailer wheels.

When towing at high altitude on steep uphill grades, consider the following:

Engine coolant will boil at a lower temperature than at normal altitudes. If the engine is turned off immediately after towing at high altitude on steep uphill grades, the vehicle may show signs similar to engine overheating. To avoid this, let the engine run while parked, preferably on level ground, with the transmission in P (Park). for a few minutes before turning the engine off. If the overheat warning comes on, please refer to your Chevrolet Operators manual.

hot.

dangEr

: Never open a radiator cap when the tow vehicle is

When driving in mud and sand let the momentum carry the rig through. Apply power gently and use as little as possible. Stay in the tracks of the vehicle ahead and keep the tow vehicle in the highest possible gear. If you are stuck it is best to tow out the entire rig together without unhitching.

Despite the best hitch you will notice that whenever a large bus or truck overtakes your rig the displaced air first pushes the trailer rear slightly to the right and then affects the front. It may be necessary to steer very slightly, momentarily, toward the bus or truck to help compensate for the sway induced by the passing-vehicle. Do not apply the vehicle brakes, as this can tend to exaggerate the situation. You may find, however, that briefly applying the trailer brakes with your manual control will help eliminate sway.

When going downhill in dry weather, down shift so that engine compression will slow the whole rig clown. Take dips and depressions in the road slowly and do not resume normal driving speeds until you are sure that the trailer wheels are clear of the dip.

Warning

: On slippery pavement do not use engine drag to help slow down as this may cause the rear wheels of the tow vehicle to skid. On icy pavement drive slowly and if you feel the tow vehicle skidding gently apply the trailer brakes only. This will bring the tow vehicle and

Warning

: Parking the vehicle on a hill with the trailer attached can be dangerous. If something goes wrong, the rig could start to move. People can be injured, and both the vehicle and the trailer can be damaged. When possible, always park the rig on a flat surface. If parking the rig on a hill, have someone CHOCK THE TRAILER WHEELS. Additional safety information is available in your Chevrolet Operator’s Manual.

B - 10 B - 11

B - 10

DRIVINg

The Chevrolet Express Van will need service more often when pulling a trailer.

Things that are especially important in trailer operation are automatic transmission fluid, engine oil, axle lubricant, belts, cooling system and brakes. It is a good idea to inspect these before and during a trip. Refer to your Chevrolet

Operator’s Manual for for more maintenance information.

Backing Up

ALWAYS TRY TO BACK TO YOUR LEFT BECAUSE THE VISIBILITY IS MUCH

BETTER. When you don’t make it on the first try it is usually much easier to pull forward to your original straight position and start over.

If your spouse or traveling companion normally directs you when backing they should position themselves forward of the tow vehicle so the driver can easily see them. Their directions should always indicate to the driver the direction the rear of the trailer should go. A little practice in a parking lot with the person

B

In BACKING UP the important thing to remember is to DO EVERYTHING SLOWLY and to correct immediately if you see the trailer turning the wrong way. Concentrate on the rear of the trailer. With your tow vehicle and trailer in a straight line, back up slowly and turn the bottom of the steering wheel in the direction you want the trailer to go. Watch out the window or in the mirror until the rear of the trailer is pointing in the desired direction. Your tow vehicle will be following the trailer in an arc.

Straighten the tow vehicle and trailer by turning the steering wheel more sharply, and then when they are in line, straighten the steering wheel.

B - 11

DRIVINg

giving directions can save a lot of frustration when backing into a campsite. Passing

B

Warning

: Take into consideration that when towing a trailer, the handling characteristics are different and less stable from those with operating the vehicle without a trailer. It is important to avoid sudden maneuvers. Sudden maneuvers may lead to loss of control over the vehicle

-- trailer combination.

Extreme care must be taken when passing another vehicle. A vehicle with a trailer attached will require additional passing distance ahead than when driving without a trailer. Because your vehicle and trailer is longer then your vehicle alone, you will also need to go much further ahead of the passed vehicle before you can return to your lane.

nOTiCE

: If the transmission hunts between gears on inclines, manually shift to a lower gear. A lower gear and reduction of speed reduces the chances of engine overloading and/or overheating. When going down a long hill, shift into a lower gear and use the engines braking effect. Avoid riding the brakes, thus overheating the vehicle and trailer brakes. If the engine coolant rises to an extremely high temperature (coolant temperature needle approaching the red zone) when the air conditioner is on, turn off the air conditioner. Engine coolant heat can be additionally vented by opening the windows, switching the climate control fan speed to high and setting the temperature control to the maximum hot position.

B - 12 B - 13

B - 12

DRIVINg

Parking Your Motorhome

Warning

: To reduce the risk of personal injury, or damage to the vehicle power train, as a result of vehicle/trailer movement, always:

Keep right foot on the brake pedal.

Shift gear selector lever to position "N".

Have a second person place wheel chocks on downhill side of left and right trailer wheels.

Slowly release brake pedal and allow vehicle and trailer to roll into chocks until stopped.

Firmly depress parking brake pedal.

Move gear selector lever to position "P".

On inclines, turn wheels towards the road curb.

TOWING YOUR MOTORHOME

WARNING: To avoid damage, the disabled vehicle should be towed with all four wheels off the ground. Consult your Chevrolet

Operators Manual or Chevrolet dealer for more information.

In addition Airstream recommends the house battery ground should be disconnected during chassis electrical work. The battery box is located

on the curbside of the vehicle.

SAFETY CHECK LIST

Your Airstream motorhome should be given a thorough safety check before a trip. Regular use of the following list will provide safe operation of your motorhome and will help you spot any malfunctioning equipment and correct the problem as soon as possible. The list is to help you and may not be allinclusive.

B

nOTiCE

: Considerable damage may occur if the motorhome is improperly lifted for towing purposes. Only qualified professional wrecker service companies with proper equipment should be used. Observe all cautions and warnings in the Chevrolet Operator’s manual before towing your motorhome.

B - 13

DRIVINg

Warning:

Failure to heed the following items may cause damage to the vehicle or personal injury.

B

EXTERIOR CHECK LIST (BEFORE ENTERING VEHICLE)

1. Check condition of tires, keep tires at recommended inflation pressure per the tire and loading placard on the driver’s door B-pillar.

2. Turn off Remote LPG valve switch.

3. Check that macerator hose, city water hookup, TV cable/satellite, and all exterior components are unhooked and properly stowed.

4. Check that all external compartments and filler openings are properly closed, latched, and/or locked.

5. Check that items stored on exterior of vehicle are securely tied down.

6. Would any items stored on exterior of vehicle present a clearance problem?

8. Follow all automotive manufacturers recommendations on checking and filling fluid levels.

9. Check exterior lights and general condition of vehicle.

INTERIOR CHECK LIST (BEFORE DRIVING OFF)

1. It is important that all doors be completely closed and locked during travel.

2. Turn off living area water pump.

3. Check that refrigerator door is closed and latched if equipped.

4. Check that nothing heavy is stored in overhead or high cabinets, which could fall out and cause injury. Heavy items should be stored in lower cabinets.

5. Stow galley flip up shelf and pedestal table.

6. Check that counter tops, range top, and shelves are clear of even small items that could become projectiles during an emergency braking or accident.

7. Do not cook while under way. Hot food or liquid could scald due to a sudden stop or accident.

8. Be sure all LPG controls on the appliances are turned off.

9. Check that any internal stowage is securely held in place

10. Check that lights and switches are set in positions safe for travel.

11. Adjust the driver’s seat so that you can easily reach and operate all controls. Make sure seat is locked in position. Do not adjust driver’s seat swivel or recline mechanisms while vehicle is moving. The seat could move unexpectedly causing loss of control.

13. Check that all passengers have seat belts on properly.

14. The freedom of movement of the brake and accelerator pedals must not be impaired in any way.

15. Check rear view mirrors adjustment, inside and outside. Adjust window coverings if necessary for maximum visibility.

16. Secure children in a Federally Approved Child Restraint Device.

B - 14 C - 1

B - 14

ChEVROLET ExPRESS VAN

The Airstream Avenue Motorhome is integrated into an Express Van designed and manufactured by Chevrolet. Operation of the Express, its engine, power train, and other related components are discussed in the Chevrolet Owner’s

Manual and other literature provided by Chevrolet. As a point of reference, those systems discussed in this literature are warranted by Chevrolet or their suppliers.

Fuel

nOTiCE:

The Chevrolet Owner’s Manual contains important fuel requirement information. Please read, understand, and follow this information.

IMPORTANT CHEVROLET INFORMATION

Component Identification

If repairs are needed, it may be difficult to determine which parts are the

Chevrolet’s and which are Airstream’s responsibility. The following partial lists show the major components of the van and the company responsible for their servicing.

C

Your Chevrolet Van Operator’s and Warranty Manuals contain important cautions, warnings, operational, and warranty information on the Express and its components. All information in the Chevrolet manual should be reviewed and followed for your safety. The Airstream Avenue Owner’s

Manual may provide additional information and tips on the use of the van as a motorhome, however, no information in the Airstream manual should be interpreted as advice or directions to disregard or void the warnings, cautions, or other information contained in the Chevrolet manuals. IF YOU BELIEVE THERE IS A CONFLICT IN INFORMATION,

WARNINGS, CAUTIONS, OR SAFETY RELATED INFORMATION BETWEEN

THE CHEVROLET AND AIRSTREAM MANUALS, PLEASE CONTACT THE

AIRSTREAM CUSTOMER RELATIONS DEPARTMENT IMMEDIATELY TO

RESOLVE THE CONFLICT.

Express Van Serviced by Chevrolet or its suppliers.

In the United States:

Chevrolet

Customer Assistance Center

PO Box 33170

Detroit, MI 48232-5170

Ph.: 800-222-1020

In Canada:

General Motors of Canada Ltd.

Customer Communication Centre

CA-163-005, 1908 Colonel Sam Drive

Oshawa, Ontario L1H 8P7

Ph.: 800 263-3777

C - 1

ChEVROLET ExPRESS VAN

C

See Chevrolet Warranty Information Manual for complete instructions.

Engine Exterior Automotive lights

Engine Battery

Engine Cooling System

Transmission

Brakes

Power mirrors

Automotive electrical system

Chassis Suspension

Drive Axle and Hubs

Steering Assembly, Steering Wheel

Automotive Fuse Panel

Wheels, Tires

Alternator

Speed Control

Instrument Panel Cluster

Doors, cab, side and rear cargo

Cab door windows and windshield

Rear window defroster

Radio/CD Player/Antenna

Parking Brake

Fuel Pump

Cargo door assist handle

7-way tow plug

*Drivers/Passenger seats

Dash AC/Heater/Defroster

Airstream Components serviced by Airstream Authorized Service Centers or Airstream suppliers.

Cab Area:

Driver’s and passenger’s seat skirting, covers, swivel pedestals.

Floor Mats

Burl Dash Trim Kit

Living Quarters:

Second row cab seats, swivels, pedestals.

Interior furniture.

Privacy curtains.

Floor covering.

Appliances in the lounge/lavy area.

Fire extinguisher.

Smoke/CO detector

Window Coverings.

All plumbing systems.

*Driver’s and Passenger’s Seats and Restraint systems. Airstream provides the swivel pedestals and seat decorative skirting. Airstream recovers the front seats to match the surrounding decor’.

Non-automotive electrical components including:

Monitor panel and its system

Inverter/Charger

Generator and components.

House battery (AGM - 2)

Battery disconnect

120-volt system

12 Volt living area system

Power vent

Roof air conditioner

Living area entertainment

C - 2 C - 3

C - 2

ChEVROLET ExPRESS VAN

Exterior TIRES

TV antenna

Wheel simulators

Exterior body kit and bumper

Power awning

Exterior patio light

Fog lamps

Hitch receiver

Don’t let anyone tell you that under inflation or over inflation of tires is all right.

It’s not. If your tires don’t have enough air (under inflation) you can get tire flexing, heat build-up, tire overloading, bad handling, bad fuel economy, and premature or irregular wear. Too high an air pressure (over inflation) can result in abnormal wear, bad handling, harsh ride, and increase the chance of damage from road hazards.

C

Exterior windows excluding windshield, and all door windows.

Access doors and other living area electrical and plumbing components

If you need further clarification or information, contact the Airstream Customer

Relations Department at 937-596-6111 before contacting a service center for an appointment.

Tire inflation pressures should be checked at least monthly and when significantly changing the load you plan to carry in your motorhome. Set the correct tire pressure before loading the vehicle. If the vehicle has been loaded, check the tire pressure and correct them if necessary. Always check tire inflation pressures when the tires are “cold”.

If you wish to write, the address is:

Airstream Inc.

Attn: Customer Service

419 W. Pike Street

P.O. Box 629

Jackson Center, Ohio 45334

A vehicle specific Tire and Loading Information Placard is attached to your vehicle. This label shows your vehicle’s original equipment tires and the correct inflation pressures for your tires when they are cold. The recommended cold tire inflation pressure is the minimum amount of air pressure needed to support your vehicle’s maximum load carrying capacity. For more information, consult your Chevrolet Operators Manual.

Proper FRONT END ALIGNMENT improves tire tread mileage. Your front-end

C - 3

ChEVROLET ExPRESS VAN

C

suspension parts should be inspected periodically and aligned when needed.

Improper alignment may or may not cause the vehicle to vibrate. However, improper alignment can cause uneven and faster tire wear, as well as potentially causing the vehicle to “pull” to the left or right.

Vehicle Placard and Tire Inflation Pressure Label

The TIRE AND LOADING INFORMATION placard supplies information on the size and the cold tire inflation pressure for the original equipment tires supplied with your vehicle. The Chevrolet Operator’s Manual provides details on how to interpret the information on this placard, it’s location and the proper weight specifications for your vehicle.

weights, tire information and the placard location.

Since RVs can be loaded with many different configurations, the load on each tire will vary. For this reason, air pressure should be checked based on the load on each individual tire. Cold Inflation Pressure should be adjusted to handle the maximum tire load, and all tires on the axle should carry the same inflation pressure. COLD TIRE INFLATION PRESSURE is the tire pressure checked in the morning before you drive more than a few miles or before rising ambient temperatures or the sun’s radiant heat affects it. Check your tires’ air pressures at least once a month, before each trip and each morning you drive during a trip. Tire pressure should be checked cold, as tire pressure ratings have been designed with typical running heat/pressure build-up in mind. Make sure the valves and caps are free of dirt and moisture.

A MOTORHOME TIRE SAFETY ADDENDUM is included with your

Airstream owner’s packet. Please take the time to read, understand, and follow the information contained in the booklet.

PROPER TIRE INFLATION

The level of air in your tires affects your vehicle’s overall performance. Not even the highest quality tire will perform well if it’s not inflated properly. The correct pressure varies from vehicle to vehicle. Each vehicle has a recommended inflation pressure, usually found on a placard. Check the Chevrolet manual for all

Tire Pressure Monitor System

This vehicle comes equipped with a Tire Pressure Monitoring System (TPMS).

This system uses radio and sensor technology to check tire pressure levels.

The TPMS sensors monitor the air pressure in your vehicle’s tires and transmit tire pressure readings to a receiver located inside the vehicle. It is designed to alert you when a significant reduction in pressure occurs in one or more of the vehicle’s tires by illuminating the low tire pressure warning light on the instrument cluster. Please read this section thoroughly in your Chevrolet Operators

C - 4 C - 5

C - 4

ChEVROLET ExPRESS VAN

Manual for more information.

IMPORTANT: The Tire Pressure Monitor System (TPMS) can alert you to low tire pressure, but it does not replace normal monthly tire maintenance.

It is the driver’s responsibility to maintain correct tire pressures.

Under Inflation

coach's needs

• Be safe - if a tire has been run 20% under inflated, it must be dismounted and inspected by a trained professional. It should not be aired up without a full inspection or without using a safety cage.

Use a calibrated gauge. If your tire is rated for higher inflation pressures, a special gauge will be required designed for larger tires.

• Don't bleed air from warm tires to reduce pressure buildup

• Don't inflate tires to cold PSI rating beyond rim specifications

C

Under inflation brings a higher risk of susceptibility to damage due to road hazards, reduces tire casing durability, and causes a loss in fuel economy, plus uneven or irregular tire wear. Severe under inflation brings about an increased risk of tread separation, handling difficulties, and possibly tire failure, which is caused by overheating.

IMPORTANT: It’s a common practice for RV owners to lower tire pressure in their search for a smoother ride. This is not only dangerous, it’s relatively ineffective, and the difference in ride quality is not significant. When minimum inflation pressure requirements are not met, tire durability and optimum operating conditions are compromised. Tire inflation pressure should always be within the specified guidelines for the vehicle.

HOW OVERLOADING AFFECTS YOUR TIRES

Tire pressure is what enables your RV tire to support loads. Overloading your tires can have serious consequences for passengers and your RV. Too much weight can cause stress on your RV’s suspension system, brake failure, shock absorber damage, handling and steering problems, irregular tire wear and possible tire failure. Excessive loads or under inflation can lead to an excessive amount of heat and tire failure. If you discover that your tires cannot handle the load, you must reduce the weight of the load on your tires.

TIRES and WHEELS (partially excerpted from the Chevrolet Operator’s

Manual)

• It may be necessary to inflate your tires at a truck stop or truck service center in order to achieve adequate air pressure for your Check tires regularly for even tread wear; tread depth (note legal requirements)

C - 5

ChEVROLET ExPRESS VAN

C

and signs of external damage. Additional information about tread depth is available in the Chevrolet Operator’s Manual.

If you need to replace any of the wheels, wheel bolts, wheel nuts or Tire Pressure

Monitor System (TPMS) sensors, replace them only with new GM original equipment parts. Refer to the TPMS section in your Chevrolet Operators

Manual for details.

Warning

: Always replace wheel nuts that are damaged or rusted. Never apply oil or grease to wheel nuts. Damaged wheel hub threads should be repaired immediately. Incorrect mounting bolts or improperly tightened mounting bolts can cause the wheel to come off.

This could cause an accident. Be sure to use the correct mounting bolts.

Checked tightness of wheel nuts regularly and retighten if necessary.

Warning

:

Do not install tires that are not approved for the size and type of wheel installed on the vehicle itself. Use only wheels and tires that have been tested and approved by the vehicle manufacturer. If you mix tires of different sizes, brands, and types (radial and bias belted), the vehicle may not handle properly and could cause you to crash and suffer bodily injury. Consult your Chevrolet Operator’s Manual for additional tire and wheel safety information.

GM recommends replacing tires as a complete set. This is because uniform tread depth on all tires will help keep your vehicle performing most like it did when the tires were new. Replacing less than a full set of tires can affect the braking and handling performance of your vehicle. Do not use remolded tires.

After changing a wheel, have a technician check the wheel nut tightness of all wheels with a torque wrench after the first 100 miles and then 1,000 miles after that.

Warning

: Using wheel sizes other than those specified by

Chevrolet in the Operator’s Manual will change the handling characteristics of the Express and may lead to an accident resulting in severe personal injuries, death and property damage.

Tighten all wheel nuts evenly in the sequence indicated in your Chevrolet

Operators Manual to 140 Lbf/ Ft.

with a torque wrench. Read the Chevrolet

manual for wheel torque and wheel tightening procedures.

C - 6 C - 7

C - 6

ChEVROLET ExPRESS VAN

Tire Grip

Trucks and SUVs are not much better with only 6-12 more inches of clearance.

Creeks and rivers can rise very rapidly and the road bottom can also wash away making the water much deeper than it appears. Tire grip is greatly reduced on a wet or icy road. Speed and driving style must therefore be adapted to suit road conditions. Below a tread depth of 1/8 in., tire grip begins to decrease rapidly on wet roads.

Hydroplaning

Once cars are swept downstream they will often roll to one side or perhaps flip over entirely. The driver has a few precious seconds to escape the vehicle. In fact, many drivers panic as soon as the vehicle submerges and are found later with their seat belt intact.

C

Depending on the depth of the water layer on the road, hydroplaning may occur, even at low speeds and with new tires. Reduce vehicle speed, avoid grooves in the road, and apply brakes cautiously in the rain.

Changing the Tire (partially excerpted from the Chevrolet Operator’s Manual)

While we are on hydroplaning lets discuss driving in a flooded area. The majority of flood-related deaths are caused by people attempting to drive through moving water.

Warning:

The Chevrolet Operator’s Manual contains impor-

tant cautions, warnings, specifications, and operational information on changing, maintaining, and replacing of the tires and wheels. Read, understand, and follow the Chevrolet manual sections for changing a tire.

Ironically, many drivers rescued from flood waters report that they were in a hurry to get home-- to safety -- as a reason for tempting the danger of driving into water. However it looks, and despite what car commercials depict, driving into flood waters may be the most dangerous things one might ever try.

Considering the following:

Most cars will float (and be swept away) in 18-24 inches of moving water.

CaUTiOn:

Changing a tire on a motorhome chassis is a physically demanding procedure. It requires specialized tools and knowledge of safety procedures. The vehicle could slip off the jack and roll over or fall on you or other people causing serious injury and possibly death. Only you can determine your knowledge base and physical ability. Don’t take

C - 7

ChEVROLET ExPRESS VAN

C any unnecessary risks. You could turn an inconvenience into a tragedy.

Please find a safe area to park your unit, call a tire service center and supply them with the information in the Chevrolet Manual if you have any doubts about changing a tire.

Flat Tire

If you get a flat tire while driving, gradually decrease your speed. Hold the steering wheel firmly and slowly move to a safe place on the side of the road.

The inflation pressure of the spare wheel should be checked regularly.

The jack is located under the rear lounge inside the motorhome.

ing vehicle with jack.

• Do not disengage parking brake while vehicle is raised.

• Always use the jack on a level surface.

• Only raise the vehicle far enough off the ground so there is enough room for the spare tire to fit.

• Make sure that the jack is properly assembled.

• Be sure to fit the jack lift head into the proper location before raising the vehicle.

• Always lower the vehicle onto sufficient capacity jack stands before working under the vehicle.

• Do not damage, grease, or oil wheel nuts or stud threads.

Procedure:

Warning

: The jack is designed exclusively for jacking up the vehicle at the specified locations listed in the Chevrolet Operator’s

Manual. To help avoid personal injury, use the jack only to lift the vehicle during a wheel change. Never get beneath the vehicle while it is supported by the jack.

Precautions when changing a wheel:

• Keep hands and feet away from the area under the lifted vehicle.

• Always firmly set parking brake and block wheels before rais-

• Park the vehicle on a firm, level, non-slippery surface.

• Switch on the hazard warning flasher switch, apply the parking brake, and place the transmission selector in “P”.

• Everyone must leave the vehicle before you jack it up.

• Everyone must leave the danger zone, before jacking the vehicle.

Danger zones vary with locations. Take a minute and look at what might happen if the vehicle falls off the jack and rolls. Set up your danger zone.

• The vehicle must be safeguarded in accordance with legal regula-

C - 8 C - 9

C - 8 tions (such as using a warning triangle).

• Prevent vehicle from rolling away by blocking wheels with wheel chocks (not supplied with vehicle) or sizable woodblocks or stone.

On a level road place one chock in front of and one behind the wheel that is diagonally opposite to the wheel being changed.

When changing a wheel on mild uphill or downhill grade, place chocks on the downhill side blocking both wheels of the other axle.

Do not jack vehicle up on a steep grade.

ChEVROLET ExPRESS VAN grades. Do not crawl under the vehicle while raised with jack. Only raise the vehicle high enough for the tire to clear the pavement when jacked up.

Otherwise, the vehicle may tip over and may cause serious injury or death to you or others. Jack stands must always be used while working beneath the vehicle. Failure to follow these precautions could result in property damage, personal injury and/or death.

C

Warning

: Do not change wheels on a steep uphill or downhill grade. The vehicle may begin to move and fall from the jack, which could cause property damage, personal injury and/or death.

JACK

Read, understand, and follow the Chevrolet operator's manual instructions, cautions, and warnings for changing a wheel and jack point locations.

Warning

: The jack is intended only for raising the vehicle briefly, for instance when changing a wheel. The jack must be placed on a firm, flat surface only. Do not change wheels on either uphill or downhill

C - 9

ChEVROLET ExPRESS VAN

C

The jack is located under the rear lounge inside the vehicle.

• Loosen the wheel nuts before raising the vehicle.

• Close the release valve on the jack.

• Assemble the pump lever provided and insert it into the socket on the jack.

• Secure lever by turning it clockwise in the socket.

• Position the jack under the appropriate jack point and raise the vehicle by pumping the lever.

Removal Instructions:

1. Use the installation tool provided to loosen the jam nut/lug nut cover. 2. Remove jam nut/lug nut cover.

3. Remove hub cover and single wheel liner.

NOTICE: For diagrams and additional information, see the original manufacturer’s instructions provided in your Airstream Owners Packet.

WHEEL SIMULATORS

nOTiCE:

After the first 100 miles check that the simulators are tight and secure to the wheels. If necessary, retighten. We recommend that the wheel simulators are checked and inspected periodically to make sure that they are tight and secure to the wheels.

The wheel simulators are installed by Airstream.

Installation Instructions:

1. Install single wheel liner over lug nuts in correct position for proper valve stem and hand hole alignment.

2. Install hub cover over single wheel liner nuts, allowing lug nuts to protrude through the attachment holes.

3. Install the jam nut/lug nut cover onto the lug nut exposed through the hub cover.

4. Use the installation tool provided to tighten the jam nut/lug nut cover.

5. Store installation tool inside vehicle.

Removing a Wheel

1. Do a safety check of your surrounding before proceeding.

2. Remove wheel simulators, if so equipped.

3. Loosen but do not remove all the wheel nuts with the wheel wrench.

4. Assemble jack and related tools.

5. Position the jack under the vehicle, using the locations listed in your Chevrolet

Operator’s Manual.

6. Raise the vehicle far enough off the ground so there is enough room for the spare tire to fit.

7. Remove all the wheel nuts.

C - 10 C - 11

C - 10

ChEVROLET ExPRESS VAN

8. Remove tire and wheel assembly.

Please read the additional warnings listed in your Chevrolet Operator’s

Manual.

NOTE: If the vehicle moves forwards or backwards while it is being jacked up, lower it, stabilize the vehicle with chocks, and reposition the jack. When the vehicle is jacked up, the jack must stand vertically (plumb-line).

Installing a Wheel

Warning

: Wheel nuts that are improperly or incorrectly tightened can cause the wheels to become loose or come off. The wheel nuts should be tightened with a torque wrench to the proper torque specification after replacing. For more information, consult your Chevrolet

Operator’s Manual. To prevent accident, injury or possible death, read all the warnings in your Chevrolet Operator’s Manual.

C

Mounting the new wheel:

1. Remove any rust or dirt from the wheel bolts, mounting surfaces and wheel assembly.

2. Install the tire and wheel assembly.

3. Put the wheel nuts back on with the rounded end of the nuts toward the wheel. Tighten each wheel nut by hand until the wheel is held against the hub.

4. Slowly lower jack, returning the vehicle to the ground.

5. Use the wheel wrench to tighten the nuts firmly. Turn the wheel wrench clockwise and in a crisscross sequence, as shown in your Chevrolet Operator’s

Manual.

6. Put the wheel simulators back on (if so equipped).

7. Have a technician check the wheel nut tightness of all wheels with a torque wrench after the first 100 miles (160 km) and then 1,000 miles after that.

Wheel Bolt Tightening

IMPORTANT! Consult the Chevrolet Operators manual for extensive wheel tightening and wheel torque procedures, cautions, and warnings.

Tighten all wheel nuts evenly in the crosswise sequence indicated in your

Chevrolet Operator’s Manual.

Warning

:

For safety reasons, the wheel tightening torque must be checked immediately after changing a tire and again after 100 miles to 140 Lbf/ Ft. as stated in your Chevrolet Operator’s Manual.

C - 11

ChEVROLET ExPRESS VAN

TIRE ROTATION SUPPORT

C

Tires should be rotated every 5,000 to 8,000 miles. The purpose of tire rotation is to achieve a uniform wear for all the tires on the vehicle. This will ensure that the vehicle continues to perform most like it did when the tires were new. The first rotation is the most important.

Inspect tires regularly for signs of wear or damage. (Remember to include the spare tire.) Any time you notice unusual wear, rotate the tires as soon as possible and check wheel alignment. Also check for damaged tires or wheels.

Rotation pattern for single rear wheels.

Since motorhomes may sit for long periods it is important to properly support the tires if blocks are used for leveling.

Extreme caution must be taken to ensure that the tires are fully supported when using blocks to level motorhomes. The load on the tire should be evenly distributed on the block and in the case of duals, evenly distributed on blocks for both tires. If not properly done, the steel cables in the sidewall of the tires may be damaged and could lead to premature fatigue of the sidewall.

CORRECT

Singles

Duals

NOTICE:

Read Chevrolet Operator’s manual for complete instructions on tire rotation, installation, and maintenance.

C - 12

Tire Foot Print

Dual Tire Foot Print

Figure 1

C - 13

C - 12

ChEVROLET ExPRESS VAN

The CORRECT methods are shown in Figure 1. A single tire or dual tires are supporting the full load. Please note that the blocks are wider than the tread and longer than the tire’s footprint. This provides maximum support to the tires and assures that the load is evenly distributed throughout the tire’s footprint area.

INCORRECT

Warning

:

Tires that are incorrectly supported may be damaged, which could lead to casing failure resulting in serious injury or property damage. If, on previous occasions, the tires have been incorrectly supported, a hidden damage may be present. Please contact your local tire dealer and request an inspection to determine possible damage.

C

Incorrect methods are shown in figure 2: One tire, a portion of one tire, or portions of two tires are supporting the full load.

Figure 2

C - 13

CAMPINg

SAFETY

Emergency Exit

D

There are three avenues of escape from the motorhome in the event of an emergency, the driver’s door which is considered the emergency egress door, the passenger door, and the side entry doors. The side entry doors are considered the main entry for the living area.

NOTE: The child proof lock system

on all doors has been disabled. As always, safety should be one of your top priorities. Make sure you, and everyone traveling with you, can operate these doors and exit rapidly without light. A little planning and a quick practice session at each camping site is well worth the time it may take.

Warning

: Read the directions carefully on the fire extinguisher.

If there is any doubt on the operation, you and your family should practice, then replace or recharge the extinguisher. Your local fire department will be happy to assist you.

Warning

:

DON’T SMOKE IN BED!

KEEP MATCHES OUT OF REACH OF SMALL CHILDREN!

DON’T CLEAN WITH FLAMMABLE MATERIAL!

KEEP FLAMMABLE MATERIAL AWAY FROM OPEN FLAME!

We have all heard these warnings many times, but they are still among the leading causes of fires.

Warning

: At each campsite make sure you have not parked in such a manner as to block the operation of the doors or the escape avenues by being too close to trees, fences or other impediments. Scenic views are one reason for traveling, but don’t park so the beautiful lake or steep cliff is just outside your doors. Do not block access to the doors from the inside or outside of the vehicle.

Other safety information on the LPG system of your motorhome is located in the Plumbing Section of this manual.

D - 1 D - 2

D - 1

SMOKE ALARM/CARBON MONOXIDE DETECTOR

Manufacturer: First Alert

Model SCO5RVA

UNITED STATES

BRK Brands, Inc.

3901 Liberty Street Road

Aurora, Illinois 60504

For consumer inquiries call: 800-323-9005

CANADA

Dicon Global, Inc.

20 Steelcase Road. West, Unit #3

Markham, Ontario.

L3R 1B2

Tel: 905-475-6006

Fax 905-475-8560

For consumer inquires call: 800-323-9005

IMPORTANT! Dangers, Warnings, and Cautions alert you to important

operating instructions or to potentially hazardous situations. Pay special attention to these items.

CAMPINg

Parts of this section on the Smoke Alarm/Carbon Monoxide Detector are a reprint of the manual included with each device and provided to you in the

Airstream owner’s briefcase. Please read, understand, and follow all aspects of the complete manual before activating and operating the Smoke Alarm/Carbon

Monoxide Detector. If you have not received the manual, use the appropriate contact information above to obtain one or contact Airstream Customer

Relations at 937-596-6111.

D

Features:

• Separate sensors to detect smoke and CO; the two alarm systems work independently

• Powered by two “AA” batteries

• Side access drawer for easy battery replacement

Warning

: Have a professional technician check all safety related systems yearly or whenever any doubts of their ability to function properly arise.

D - 2

CAMPINg

FIRE SAFETY TIPS BASIC SAFETY INFORMATION

D

Follow safety rules and prevent hazardous situations: 1) Use smoking materials properly. Never smoke in bed. 2) Keep matches or lighters away from children;

3) Store flammable materials in proper containers; 4) Keep electrical appliances in good condition and don’t overload electrical circuits; 5) Keep stoves and barbecue grills grease and debris free; 6) Never leave anything cooking on the stove unattended; 7) Keep portable heaters and open flames, like candles, away from flammable materials; 8) Don’t let rubbish accumulate.

CaUTiOn:

This combination Smoke/Carbon Monoxide Alarm has two separate alarms. The CO Alarm is not designed to detect fire or any other gas. It will only indicate the presence of carbon monoxide gas at the sensor. Carbon monoxide gas may be present in other areas. The

Smoke Alarm will only indicate the presence of smoke that reaches the sensor. The Smoke Alarm is not designed to sense gas, heat or flames.

Keep alarms clean, and test them weekly. Replace alarms immediately if they are not working properly. Smoke Alarms that do not work cannot alert you to a fire. Keep at least one working fire extinguisher in your RV, and an additional one in the kitchen.

Warning:

Smoke and Carbon Monoxide Alarm is shipped with batteries deactivated. Ask dealer to activate batteries or activate batteries immediately upon delivery. Failure to follow warning will remove your protection.

Battery Activation

To activate battery pull labeled clear plastic tab from device. If tab was previously removed, test batteries and replace as needed.

WarningS:

• This Smoke/CO Alarm cannot operate without working batteries.

Removing the batteries for any reason, or failing to replace the batteries at the end of their service life, removes your protection.

• NEVER ignore any alarm. See “If Your Smoke/CO Alarm Sounds” for more information on how to respond to an alarm. Failure to respond can result in injury or death.

• The Silence Features are for your convenience only and will not correct a problem. See “Using the Silence Features” for details. Always check your home for a potential problem after any alarm. Failure to do so can result in injury or death.

• Test this Smoke/CO Alarm once a week. If the alarm ever fails to test

D - 3 D - 4

D - 3

CAMPINg correctly, have it replaced immediately! If the alarm is not working properly, it cannot alert you to a problem.

• This product is intended for use in ordinary indoor locations of family living units. It is not designed to measure CO levels in compliance with

Occupational Safety and Health Administration (OSHA) commercial or industrial standards. Individuals with medical conditions that may make them more sensitive to carbon monoxide may consider using warning devices which provide audible and visual signals for carbon monoxide concentrations under 30 ppm. For additional information on carbon monoxide and your medical condition contact your physician.

To return to the default horn pattern of 3 beeps, pause, 3 beeps; open the battery drawer and then close the battery drawer.

In the U. S. the horn pattern is 3 beeps, pause, 3 beeps.

In Canada the horn pattern is 6 beeps, pause, 6 beeps

Always test the alarm to verify the horn pattern for your area.

NOTE: See the First Alert User’s Manual for information on optional locking features.

WEEKLY TESTING

Warning:

Test units in your RV after the vehicle has been in storage, before each trip, and at least once a week while in use. Failure to test units used in RVs as described may remove your protection.

Horn Pattern Selection For Smoke Alarm

WarningS:

• NEVER use an open flame of any kind to test this unit. You might accidentally damage or set fire to the unit or to your home. The built-in test switch accurately tests the unit’s operation as required by Underwriters

Laboratories, Inc. (UL). NEVER use vehicle exhaust! It may cause permanent damage and voids your warranty.

When the alarm detects smoke, the default horn pattern is 3 beeps, pause, 3 beeps. To manually change the horn pattern to 6 beeps, pause, 6 beeps: open the battery drawer (with batteries installed) , press and hold the test button down and then close the battery drawer.

• DO NOT stand close to the alarm when the horn is sounding. Exposure at close range may be harmful to your hearing. When testing, step away when horn starts sounding.

D

D - 4

CAMPINg

Parts Of This Smoke/CO Alarm

2

1

CaUTiOn:

It is important to test this unit every week to make sure it is working properly. Using the test button is the recommended way to test this Smoke/CO Alarm.

D

Test this Smoke/CO Alarm: Press and hold the Test/Silence button 3-5 seconds until unit starts to alarm.

During testing, you will see and hear the following sequence:

• The Horn will sound 3 beeps, pause, 3 beeps. The Power/Smoke LED flashes Red and the CO LED will be Off. NOTE: For Canada the horn will sound 6 beeps, pause, 6 beeps. The Power/Smoke LED flashes Red and

• the CO LED will be Off.

Next the Horn will sound 4 beeps, pause, 4 beeps. The

Power/Smoke

LED will be Off and the CO LED flashes Red.

1.

2.

3.

4.

Test/Silence Button

Battery Compartment

Power/Smoke Alarm LED

CO Alarm LED

REGULAR MAINTENANCE

4

3

This unit has been designed to be as maintenance-free as possible, but there are a few simple things you must do to keep it working properly. Use only the replacement batteries listed below. The unit may not operate properly with other batteries. Never use rechargeable batteries since they may not provide a constant charge.

If the unit does not alarm, make sure the batteries are correctly installed and test again. If the unit still does not alarm, replace it immediately.

• Test it at least once a week.

• Clean the Smoke/CO Alarm at least once a month; gently vacuum the outside of the Smoke/CO Alarm using your household vacuum’s soft brush attachment. A can of clean compressed air (sold at computer or office supply stores) may also be used. Follow manufacturer instructions for use. Test the Smoke/

CO Alarm once a week. Never use water, cleaners or solvents since they may damage the unit.

• If the Smoke/CO Alarm becomes contaminated by excessive dirt, dust and/

D - 5 D - 6

D - 5

CAMPINg

or grime, and cannot be cleaned to avoid unwanted alarms, replace the unit immediately.

• Relocate the unit if it sounds frequent unwanted alarms. See “Where This

Alarm Should Not Be Installed” for details.

Choosing a replacement battery:

Your Smoke/CO Alarm requires two standard AA batteries. It was shipped with two AA batteries. The following batteries are acceptable as replacements:

Eveready Energizer E91. These batteries are available at many local retail stores.

3. Insert the new batteries, making sure they snap completely into the battery compartment. Match the terminals on the ends of the batteries with the terminals on the unit.

4. Close the battery compartment, and then test the unit by pressing the Test/Silence button.

A

B

Warning:

The battery door will resist closing unless batteries are installed. This warns you that the unit will not operate without batteries.

D

IMPORTANT!

Actual battery service life depends on the Smoke/CO Alarm and the environment in which it is installed. All the batteries specified above are acceptable replacement batteries for this unit. Regardless of the manufacturer’s suggested battery life, you MUST replace the battery immediately once the unit starts

“chirping” (the “low battery warning”).

To replace the batteries (without removing Alarm from the ceiling or wall):

1. Open the battery compartment.

2. Press tabs A and B as shown in the diagram and remove each battery.

IF YOUR SMOKE/CO ALARM SOUNDS

WHAT TO DO FIRST - IDENTIFY THE TYPE OF ALARM

Type of Alarm

Carbon Monoxide (CO)

Smoke

What You See and Hear

CO LED: Flashes Red

Horn: 4 beeps, pause, 4 beeps, pause.

Power/Smoke LED: Off.

Power/Smoke LED: Flashes Red

Horn: (US) 3 beeps, pause, 3 beeps, pause.

Horn: (Canada) 6 beeps, pause, 6 beeps, pause.

CO LED: Off.

D - 6

CAMPINg

If The CO Alarm Sounds

dangEr:

Actuation of your CO Alarm indicates the presence of carbon monoxide (CO) which can kill you. In other words, when your CO

Alarm sounds, you must not ignore it!

D

1. Operate the Test/Silence button.

2. Call your emergency services, fire department or 911. Write down the number of your local emergency service here: instructions, or contact the manufacturers directly, for more information about

CO safety and this equipment. Make sure that motor vehicles are not, and have not, been operating in an attached garage or adjacent to the residence. Write down the number of a qualified appliance technician here:

____________________________________________________________________

“ALARM-MOVE TO FRESH AIR”

If you hear the CO alarm horn and the CO red light is flashing, move everyone to a source of fresh air. DO NOT remove the batteries!

__________________________________________________________________

3. Immediately move to fresh air—outdoors or by an open door or window. Do a head count to check that all persons are accounted for. Do not reenter the premises, or move away from the open door or window until the emergency services responder has arrived, the premises have been aired out, and your CO

Alarm remains in its normal condition.

4. After following steps 1-3, if your CO Alarm reactivates within a 24-hour period, repeat steps 1-3 and call a qualified appliance technician to investigate for sources of CO from fuel-burning equipment and appliances, and inspect for proper operation of this equipment. If problems are identified during this inspection have the equipment serviced immediately. Note any combustion equipment not inspected by the technician, and consult the manufacturers’

IF THE SMOKE ALARM SOUNDS

RESPONDING TO AN ALARM

• dangEr:

If the unit alarms and you are not testing the unit, it is warning you of a potentially dangerous situation that requires your immediate attention. NEVER ignore any alarm. Ignoring the alarm may result in injury or death.

Never remove the batteries from a battery operated Smoke/CO

Alarm to stop an unwanted alarm (caused by cooking smoke, etc.).

D - 7 D - 8

D - 7

CAMPINg

Removing batteries disables the alarm so it cannot sense smoke, and removes your protection. Instead open a window or fan the smoke away from the unit. The alarm will reset automatically.

If the unit alarms get everyone out of the motorhome immediately.

WHAT TO DO IN CASE OF FIRE

Don’t panic; stay calm. Follow your family escape plan.

Get everyone out of the motorhome as quickly as possible.

Don’t stop to get dressed or collect anything.

Feel doors with the back of your hand before opening them. If a door is cool, open it slowly. Don’t open a hot door. Keep doors and windows closed, unless you must escape through them.

Cover your nose and mouth with a cloth (preferably damp). Take short, shallow breaths.

Meet at your planned meeting place outside your motorhome, and do a head count to make sure everybody got out safely.

Call the Fire Department as soon as possible from outside. Give your address, then your name.

Never go back inside a burning motorhome for any reason.

Contact your Fire Department for ideas on making your motorhome safer.

DEVELOP AND PRACTICE A PLAN OF ESCAPE:

• Make a floor plan indicating all doors used as escape routes from the motorhome.

• Have a family meeting and discuss your escape plan, showing everyone what to do in case of fire.

• At each campground determine a place outside your motorhome where you all can meet if a fire occurs.

• Familiarize everyone with the sound of the Smoke Alarm and train him or her to leave your motorhome when they hear it.

• Practice a fire drill at least every six months or when ever new guests are with you. Practice allows you to test your plan before an emergency; you may not be able to reach your children or may be visiting a fellow camper while they sleep. It is important they know what to do.

Alarms have various limitations. See “General Limitations of Smoke/CO Alarms” for details.

D

D - 8

CAMPINg

USING THE SILENCE FEATURES

Warning:

Never remove the batteries to quiet an unwanted alarm. Removing the batteries disables the alarm and removes your protection. Do not use the Silence Feature in emergency situations. It will not correct a CO problem or extinguish a fire.

D

The Silence Feature is intended to temporarily silence the horn while you identify and correct the problem. The Silence Feature can temporarily quiet an unwanted alarm for several minutes. Press the Test/

Silence button on the alarm cover for at least 3-5 seconds. After the Test/

Silence button is released, the Red LED blinks during the silence mode.

This silence feature can temporarily quiet the low battery warning “chirp” for up to 8 hours. You can silence the low battery warning “chirp”: press the Test/

Silence Button on the alarm cover.

Once the low battery warning “chirp” silence feature is activated, the unit continues to flash the Green light twice a minute for 8 hours. After 8 hours, the low battery “chirp” will resume.

Replace the batteries as soon as possible; this unit will not operate without battery power!

To deactivate this feature: Press the Test/Silence button again. The unit will go into Test Mode and the low battery warning will resume (LED flashes and unit sounds “chirp” once a minute).

SILENCING THE LOW BATTERY WARNING WHAT YOU NEED TO KNOW ABOUT CARBON MONOXIDE (CO). WHAT IS

CO?

CO is an invisible, odorless, tasteless gas produced when fossil fuels do not burn completely, or are exposed to heat (usually fire). Electrical appliances typically do not produce CO.

These fuels include: Wood, coal, charcoal, oil, natural gas, gasoline, kerosene, and liquid propane.

D - 9 D - 10

D - 9

CAMPINg

Common appliances are often sources of CO. If they are not properly maintained, are improperly ventilated, or malfunction, CO levels can rise quickly. CO is a real danger now that homes are more energy efficient. “Air-tight” homes with added insulation, sealed windows, and other weatherproofing can “trap”

CO inside.

SYMPTOMS OF CO POISONING

These symptoms are related to CO POISONING and should be discussed with

ALL household members.

Mild Exposure: Slight headache, nausea, vomiting, fatigue (“flu-like” symptoms).

Important!

This CO Alarm measures exposure to CO over time. It alarms if CO levels are extremely high in a short period of time, or if CO levels reach a certain minimum over a long period of time. The CO Alarm generally sounds an alarm before the onset of symptoms in average, healthy adults. Why is this important? Because you need to be warned of a potential CO problem while you can still react in time. In many reported cases of CO exposure, victims may be aware that they are not feeling well, but become disoriented and can no longer react well enough to exit the building or get help. Also, young children and pets may be the first affected. The average healthy adult might not feel any symptoms when the CO Alarm sounds. However, people with cardiac or respiratory problems, infants, unborn babies, pregnant mothers, or elderly people can be more quickly and severely affected by CO. If you experience even mild symptoms of

CO poisoning, consult your doctor immediately!

D

Medium Exposure: Throbbing headache, drowsiness, confusion, fast heart rate.

FINDING THE SOURCE OF CO AFTER AN ALARM

Extreme Exposure: Convulsions, unconsciousness, heart and lung failure.

Exposure to Carbon Monoxide can cause brain damage, death.

Carbon monoxide is an odorless, invisible gas, which often makes it difficult to locate the source of CO after an alarm. These are a few of the factors that can make it difficult to locate sources of CO:

• Motorhome well ventilated before the investigator arrives.

• Problem caused by “backdrafting.”

D - 10

CAMPINg

D

• Transient CO problem caused by special circumstances.

POTENTIAL SOURCES OF CO IN THE RECREATIONAL VEHICLE

Fuel-burning appliances like: a portable heater, gas kitchen range or cook top, furnace, hot water heater.

Damaged or insufficient venting: corroded or disconnected water heater vent pipe, leaking or damaged furnace vent, or cracked heat exchanger, blocked or clogged appliance vents.

Negative pressure differential resulting from the use of exhaust fans.

Several appliances running at the same time competing for

• limited fresh air.

Vent pipe connections vibrating loose from the furnace, water heater or other fuel burning appliances.

Obstructions in or unconventional vent pipe designs which can • amplify the above situations.

2. Extended operation of non vented fuel burning devices (cooktop).

3. Temperature inversions, which can trap exhaust close to the ground.

4. Motorhome idling in an open or closed attached garage, or near a home.

Improper use of appliances/device: operating fuel burning appliances or vehicle in an enclosed area (like a garage or screened porch).

Transient CO Problems: “transient” or on-again-off-again CO problems can be caused by outdoor conditions and other special circumstances.

These conditions are dangerous because they can trap exhaust in your motorhome.

The following conditions can result in transient CO situations:

Since these conditions can come and go, they are also hard to recreate during a CO investigation.

1. Excessive spillage or reverse venting of fuel appliances caused by outdoor conditions such as:

• Wind direction and/or velocity, including high, gusty winds.

Heavy air in the vent pipes (cold/humid air with extended periods between cycles).

HOW CAN I PROTECT MY FAMILY FROM CO POISONING?

A CO Alarm is an excellent means of protection. It monitors the air and sounds a loud alarm before Carbon Monoxide levels become threatening for average, healthy adults.

D - 11 D - 12

D - 11

CAMPINg

A CO Alarm is not a substitute for proper maintenance of home appliances.

To help prevent CO problems and reduce the risk of CO poisoning:

• Clean appliance vents yearly. Keep them free of debris, leaves, and nests for proper air flow. Also, have a professional check for

• rust and corrosion, cracks, or separations. These conditions can prevent proper air movement and cause back drafting. Never

“cap” or cover a vent in any way that would block air flow.

Test and maintain all fuel-burning equipment annually. Most RV

• service centers offer appliance inspections for a nominal fee.

Make regular visual inspections of all fuel-burning appliances.

Check appliances for excessive rust and scaling. Also check the flame on the burner and pilot lights. The flame should be blue. A yellow flame means fuel is not being burned completely and CO may be present. Keep the blower door on the furnace closed. Use vents or fans when they are available on all fuelburning appliances. Make sure appliances are vented to the outside. Do not grill or barbecue indoors, or in garages or on screen porches.

Check for exhaust back flow from CO sources. Check the draft hood on an operating furnace for a back draft. Look for cracks on furnace heat exchangers.

Check the RV beside you at a campground. CO can come in an open window or vent

Keep windows and doors open slightly. If you suspect that CO is escaping into your motorhome, open a window or a door.

Opening windows and doors can significantly decrease CO levels.

GENERAL LIMITATIONS OF SMOKE/CO ALARMS

Smoke/CO Alarms may not waken all individuals. Practice the escape plan before every excursion and with all newcomers to the vehicle, making sure that everyone is involved. Allow children to master fire escape planning and practice before holding a fire drill at night when they are sleeping. If children or others do not readily waken to the sound of the Smoke/CO Alarm, or if there are infants or family members with mobility limitations, make sure that someone is assigned to assist them in a fire drill and in the event of an emergency. It is recommended that you hold a fire drill while family members are sleeping in order to determine their response to the sound of the Smoke/CO Alarm while sleeping and to determine whether they may need assistance in the event of an emergency.

Smoke/CO Alarms cannot work without power. Battery operated units cannot work if the batteries are missing, disconnected, or dead, if the wrong type of batteries are used, or if the batteries are not installed correctly. AC units cannot work if the AC power is cut off for any reason (open fuse or circuit

D

D - 12

CAMPINg

breaker, failure along a power line or at a power station, electrical fire that burns the electrical wires, etc.). If you are concerned about the limitations of battery or AC power, install both types of units.

immediately. Examples of this include persons smoking in bed, children playing with matches, or fires caused by violent explosions resulting from escaping gas.

D

This Smoke/CO Alarm will not sense smoke or CO that does not reach

the sensors. It will only sense smoke or CO at the sensor. Smoke or CO may be present in other areas. Doors or other obstructions may affect the rate at which CO or smoke reaches the sensors. Consider installing another alarm device (Combination CO and Smoke Alarm, or separate CO Alarms and Smoke

Alarms) if you inhabit areas you believe need protection.

This Smoke/CO Alarm is not a substitute for life insurance. Though this

Smoke/CO Alarm warns against increasing CO levels or the presence of smoke, Airstream Inc. and/or BRK Brands, Inc. does not warrant or imply in any way that they will protect lives. Motorhome owners and users must still insure their lives.

Smoke/CO Alarms may not be heard. The alarm horn loudness meets or exceeds current UL standards of 85 dB at 10 feet (3 meters). However, the

Smoke/CO Alarm may not wake up a sound sleeper or one who has recently used drugs or has been drinking alcoholic beverages. This is especially true if the door is closed or only partly open. Even persons who are awake may not hear the alarm horn if the sound is blocked by distance or closed doors. Noise from traffic, stereo, radio, television, air conditioner, or other appliances may also prevent alert persons from hearing the alarm horn. This Smoke/CO Alarm is not intended for people who are hearing impaired.

This Smoke/CO Alarm has a limited life. Although this Smoke/CO Alarm and all of its parts have passed many stringent tests and are designed to be as reliable as possible, any of these parts could fail at any time. Therefore, you must test this device weekly. The unit should be replaced immediately if it is not operating properly. Any Smoke/CO Alarm that is beyond its replacement date should be replaced immediately.

This Smoke/CO Alarm is not foolproof. Like all other electronic devices, this

Smoke/CO Alarm has limitations. It can only detect smoke or CO that reaches the sensors. It may not give early warning of the source of smoke or CO if it is in a remote part of the motorhome, away from the alarm device.

The Alarm may not have time to alarm before the fire itself causes dam-

age, injury, or death. Since smoke from some fires may not reach the unit The First Alert Users Manual provided in your owner’s packet has troubleshoot-

D - 13 D - 14

D - 13

CAMPINg

ing and other important information. Please read, understand, and follow all information contained the First Alert Manual. If you have any questions concerning the alarm that cannot be answered in this manual or the First Alert manual please contact First Alert Consumer Affairs at 1 800.323.9005, M-F

7:30 AM to 5:00 PM (CST) or Airstream Customer relations 937.596.6111. the LED indicator will be green.

LOW VOLTAGE

LP GAS DETECTOR

THIS ALARM HAS A SEVEN YEAR LIFE, SEE END OF LIFE NOTIFICATION

IN LP DETECTOR MANUAL. PLEASE READ ENTIRE DETECTOR MANUAL

BEFORE OPERATING UNIT.

The operating voltage for the detector is 12 VDC. The actual voltage supplied to the detector in a recreational vehicle may drop below the minimum 8 VDC.

The detector is designed to provide the user with a LOW VOLTAGE WARNING before reaching that level and to provide additional distinct, clear warnings and alarms after the 8 VDC level is reached. However, if available power supplied to the unit is below the operating voltage of 8 VDC the detector will not detect gas or provide you protection against dangerous levels of LP Gas.

D

In the kitchen area of your unit is the LP gas detector. LP gas is a mixture of gases produced and sold commercially as a fuel for heating and cooking appliances. LP gas is highly flammable and, as a result, can be explosive if ignited under certain circumstances. LP gas is heavier than air and, if confined in a closed space, will accumulate close to the floor. The LP gas detector is designed to alarm at less than 25% of the legal explosive limit. It will provide a visual and audible alarm by sounding an alarm every 5 seconds and lighting the red LED. dangEr

: Activation of this detector indicates the presence of

LP gas, which can cause an explosion and/or fire causing death or serious injury. This normally indicates a leak in the LP gas installation or a LP gas appliance. Extinguish all open flames, open your windows and door and evacuate the unit immediately. Do not activate any electrical switch. Turn off the LP at your gas bottle(s). DO NOT RE-ENTER YOUR UNIT UNTIL A

QUALIFIED REPAIR TECHNICIAN HAS CORRECTED THE PROBLEM AND

CERTIFIED THE SYSTEM AS SAFE.

Your LP gas detector is wired directly to your vehicle battery and incorporates a

1-amp in-line fuse. It has no internal battery back up. In Normal Stand By Mode dangEr

: It is not recommended that the detector be disconnected from the battery during periods of storage. There is a

D - 14

CAMPINg small heater on the sensor of the device, which “burns” away impurities in the air during periods of normal use. During periods when power is interrupted, impurities can build up on the sensor. When power is returned to the detector the detector alarm may activate until the impurities are

“burned” off. This could take a number of hours, during which time the alarm will be constantly “on”.

D

DETECTOR TEST

OVERNIGHT STOP

In time you will develop a knack for spotting wonderful little roadside locations by turning off the main highway and exploring. There are many modern recreational vehicle parks, including State, County and Federal parks with good facilities, where you may obtain hookups of electrical, water and sewer connections. Directories are published which describe in detail these parks and tell what is available in the way of services and hookups.

The Test/Rest button is used to verify proper alarm function. Executing the test function sounds the alarm and lights up the red LED. The test will sound the alarm twice, with 4 “beeps” in one second followed by 5 seconds of silence. By pressing the button you can verify that the alarm sounds and the LED functions properly.

dangEr

Have a qualified technician check your LP Gas system

annually or if you have any signs of leaks or malfunctions.

All you need to do to enjoy the self-contained luxury is to:

1. Turn on LP gas supply and light appliance pilots if required.

2. Turn on water pump and open faucets until air is expelled from the system.

Before moving on, turn off the LP gas and water pump. Check your campsite, both for cleanliness and to be sure you haven’t left anything behind. Make sure everything is properly stowed.

Overnight or Weekend Trips

On overnight or weekend trips, chances are you will not use up the capacity of the holding tanks, deplete the water supply, or run down the battery which supplies the living area 12 volt current.

D - 15 D - 16

D - 15

CAMPINg

LONGER TRIP

On a longer trip, when you have stayed where sewer connections and utility hookups were not available, it will be necessary for you to stop from time to time to dispose of the waste in the holding tank and replenish the water supply. Many gas stations (chain and individually owned) have installed sanitary dumping stations for just this purpose. Booklets are available which list these dumping stations. with a small spirit level set on the inside work counter. If a correction is necessary, then you must first level from side to side. This can be done most easily by driving up a small ramp consisting of 2” x 6” boards tapered at both ends. WE

DO NOT RECOMMEND PLACING TIRES IN A HOLE FOR LEVELING. Check the tire section of the chassis portion of this manual for information on tire support.

Hook Up to Water by attaching a ½ “ minimum high-pressure water hose to the city water service.

D

When you stop for the night, your Airstream motorhome is built to be safely parked in any spot that is relatively level and where the ground is firm. Your facilities are with you. You are self-contained. Try to pick as level a parking spot as possible.

Plug the Electrical Cable into the City Power Service. Be sure you have the wire grounded and have the proper polarity. See Electrical Section for technical details.

EXTENDED STAY

Making a long trip is not very different from making a weekend excursion. Since everything you need is right at hand, you are at home wherever you go. When packing for an extended trip, take everything you need, but only what you need.

To use the Generator you simply start it. All switching is done automatically.

The generator can be started from the switch inside the curbside rear roof locker. It is easier on your generator and appliances if you’ll allow the generator to reach its normal operating speed (about a minute) prior to applying heavy current loads.

When you plan to stay in the same place for several days, weeks or months, you will want your motorhome to be as level as possible. Check the attitude

A Cable/Satellite TV connection is located on the outside of the motorhome. It is already wired into the existing system, so the exterior connection is all that is required.

D - 16

CAMPINg

D

Turn on the gas supply. Lighting a top range burner to bleed any air from the system will make it easier to start other appliances including the furnace.

When you stay for extended periods where electric or water hookups are not available, you must make regular checks on the condition of your 12-volt battery and the contents of your water tank. Carry drinking water in a clean bucket to refill your tank. When your waste tanks nears capacity, move your motorhome to a dumping location. ner than house walls. Estimates indicate that two adults can vaporize up to one and a half gallons of water daily through breathing, cooking, bathing, and washing. Unless the water vapor is carried outside by ventilation, or condensed by a dehumidifier, it will condense on the inside of the windows and walls as moisture, or in cold weather as frost or ice. It may also condense out of sight within the walls or the ceiling where it will manifest itself as warped or stained panels. Appearance of these conditions may indicate a serious condensation problem. When you recognize the signs of excessive moisture and condensation in the motorhome, action should be taken to minimize their effects.

EFFECTS OF PROLONGED OCCUPANCY

Your motorhome was designed primarily for recreational use and short-term occupancy. If you expect to occupy the motorhome for an extended period, be prepared to deal with condensation and the humid conditions that may be encountered. The relatively small volume and tight compact construction of modern recreation vehicles mean that the normal living activities of even a few occupants will lead to rapid moisture saturation of the air contained in the motorhome and the appearance of visible moisture, especially in cold weather.

Note: Your motorhome is not designed, nor intended, for permanent housing.

Use of this product for long term or permanent occupancy may lead to premature deterioration of structure, interior finishes, fabrics, carpeting, and drapes.

Damage or deterioration due to long-term occupancy may not be considered normal, and may under the terms of the warranty constitute misuse, abuse, or neglect, and may therefore reduce the warranty protection.

To avoid condensation problems, try to follow these tips to help alleviate excess moisture:

Just as moisture collects on the outside of a glass of cold water during humid weather, moisture can condense on the inside surfaces of the motorhome during cold weather when relative humidity of the interior air is high. This condition is increased because the insulated walls of a recreation vehicle are much thin-

Allow excess moisture to escape to the outside when bathing, washing dishes, hair drying, laundering, and using appliances and non-vented gas burners.

Always use an exhaust fan when cooking.

D - 17 D - 18

D - 17

CAMPINg

Keep the bathroom door closed and the vent or window open when showering or bathing and for a period of time after you have finished.

Minimize use of incandescent lights, which produce heat and contribute to condensation.

Do not hang wet clothes in the motorhome to dry.

In hot weather, start the air conditioner early as it removes excess humidity from the air while lowering the temperature.

Keep the temperature as reasonably cool during cold weather as possible.

The warmer the vehicle, the more cold exterior temperatures and warm interior temperatures will collide on wall surfaces, thus creating condensation.

Use the ceiling vent to keep air circulating inside the vehicle so condensation and mildew cannot form in dead air spaces. Allow air to circulate inside closets and cabinets (leave doors partially open). Please keep in mind that a closed cabinet full of stored goods prevents circulation and allows the exterior temperature to cause condensation.

The natural tendency would be to close the vehicle tightly during cold weather.

This will actually compound the problem. Simply put, you need to remove some of the warm humid air, and allow some cool drier outside air to get inside the vehicle, so the furnace will not recycle the humid interior air.

D

D - 18

CAMPINg

ABOUT MOLDS How can mold growth be inhibited?

What are molds?

D

Molds are microscopic organisms that naturally occur in virtually every environment, indoors and out. Outdoors, mold growth is important in the decomposition of plants. Indoors, mold growth is unfavorable. Left unchecked, molds break down natural materials, such as wood products and fabrics. Knowing the potential risks is important for any type of homeowner to protect their investment.

By controlling relative humidity, the growth of mold and mildew can be inhibited.

In warm climates, use of the air conditioner will reduce the relative humidity.

Vents are located in the bathing and cooking areas and constant use is advised during food preparation and bathing, even during colder weather. Additionally, opening a window during these activities will assist in ventilation. In extremely humid conditions, the use of a dehumidifier can be helpful. If using a dehumidifier, please read and follow all manufacturer instructions and recommendations to the use and cleaning of the dehumidifier.

What factors contribute to mold growth?

For mold growth to occur, temperatures, indoor or outdoors, must be between

40 degrees and 100 degrees Fahrenheit and also have a source of moisture, such as humidity, standing water, damp materials, etc. Indoors, the most rapid growth occurs with warm and humid conditions.

Frequent use of your RV or cleaning regularly is an important preventive measure. Further, any spills should be wiped up quickly and dried as soon as possible. Avoid leaving damp items lying about. On safe surfaces, use mold or mildew killing cleaning products. Check sealants regularly, and reseal when necessary to avoid water leaks. Proper preventive maintenance to the

RV and its accessories, as described both in this manual and in accompanying literature, will provide the best protection to the RV.

D - 19 D - 20

D - 19

CAMPINg

WINTER TRAVELING

Traveling in your motorhome during the cold winter months can be a most exhilarating experience. There are, of course, certain precautions that must be taken as you would in your home in low temperatures.

2. If your stay is longer than overnight, you should endeavor to have 120-volt electricity available. The house battery, fully charged, will not last more than about 15 hours in freezing weather, less with the use of the tank heating pads. Of course, you can run your generator to recharge the battery, or even use the generator continually. Keep an eye on your LP Gas or engine fuel according to the type of generator your motorhome is equipped with.

Since the generator starts off the house battery, it is recommended to start the generator prior to running the battery down.

D

The Avenue motorhome has 12-Volt heat pads installed with all three holding tanks. The tanks are all below the floor of the motorhome. The lighted switch, when switch is lit the heating pad is on, for the heating pads is located in the curbside rear overhead locker. To conserve battery power, RV antifreeze may be used to protect the gray and black tanks. Battery power will last about 4 hours unless the unit is plugged into a 120-volt shoreline or the generator is ran to operate the inverter/charger.

3. Minimize use of electricity if 120-volt power source is not available.

4. Leave cabinet doors, wet bath doors and wardrobe doors slightly open at night to allow circulation of air in and around all components.

Some states do not allow LPG to be turned on while moving. While traveling in these states you must use your common sense. How cold is it? How long will it be before you can turn the heat back on? Is the temperature dropping or rising?

Remember, the wind chill factor when driving 50 MPH will cause the interior of the motorhome to cool much faster than when it is parked.

5. Save 12-volt power by using non-toxic RV approved antifreeze in greywater holding tank instead of heating pad to prevent freezing. Quantity of antifreeze needed will vary with ambient temperature and the amount of liquids in tank.

1. You must have a plentiful supply of propane gas as the heat from the furnace warms the motorhome and keeps the water lines from freezing.

6. For extended stays in cold weather, insulate all water lines outside the motorhome. You should remember that low temperatures in combination with high winds cause an equivalent chill temperature much below what your thermometer is reading. For instance, with an outside temperature of

D - 20

D

CAMPINg

zero degrees, and the wind velocity of 10 miles per hour, the equivalent chill temperature is minus 20° F.

7. Remember to remove and drain the exterior shower faucet to prevent freeze damage.

D - 21 E - 1

D - 21

ExTERIOR

The exterior of your Airstream Avenue Motorhome, except for the cap and body kit, has been painted by Chevrolet. The care of the paint is detailed in the

Chevrolet manual. nOTiCE:

Information on finish care may provide additional information and tips on the use of the van as a motorhome, however, no information about the exterior finish of your motorhome in this manual should be interpreted as advice or directions to disregard or void the warnings, cautions, or other information contained in the Chevrolet’s manuals.

in harsh environments. Clearcoats do not fade themselves, but appear to fade or lose gloss as the surface becomes contaminated by the environment. If this contamination is not removed frequently, results will be a dull or low gloss finish. Occasional washing alone will not adequately remove some forms of contamination and will require polishing.

The following additional information is provided by Airstream to help you understand the finish and its care. Following these instructions will provide a long lasting, high-gloss finish for your recreational vehicle. These same procedures can also be applied to your everyday automobile, producing the same longlasting results.

Polishes and waxes primarily served the following purposes:

1. To remove minor surface imperfections caused by water spots and acid rain.

2. To remove minor scratches by filling them and leveling the surface.

3. To beautify the paint finish appearances with more depth and high-gloss.

4. To protect the paint finish from the elements.

Waxes and Polishes

Over 90 percent of all automotive finishes are clear coat. The finish on your

RV is a state-of-the-art Acrylic Urethane Basecoat/ClearCoat. This means that what you will wash and polish is a clear urethane coating designed to protect the basecoat: the pigmented coating that provides color. As its main function of protecting the basecoat, clearcoats need to be maintained especially

Do not use products that contain harsh abrasives such as rubbing or polishing compounds. These products should be used by experienced technicians with the proper training and equipment. Most polishes and waxes are designed to clean and polish in one application whether by hand or machine. A machine applied polish will last longer than one applied by hand because the high rpm buffing will create heat, resulting in a deeper wax film with higher gloss.

However, a hand applied polish or wax will offer outstanding performance and protect the RVs finish. When applying polish or wax, do so in a shaded area

E

E - 1

ExTERIOR

making sure the RV surface is at the specified temperature according to the polish manufacturers recommendations.

2. ROAD TAR/BUGS

3. BIRD DROPPINGS/TREE SAP

4. INDUSTRIAL FALLOUT/ACID RAIN/POLLUTION

5. ULTRAVIOLET EXPOSURE AND MOISTURE

E

Due to the variations of polishes and waxes, incorporate the following suggestions into the polishing technique:

1. Condition the polishing pad by rubbing a slight amount of polish on it.

2. Use only the amount of polish specified in the label directions.

3. Work a small area at a time.

4. Rinse off and remove dried polish from crevices, trim and moldings.

5. Follow the product manufacturer’s directions.

The most common problems resulting from these conditions are corrosion, staining, and chemical spotting. These problems can be minimized through regularly scheduled washing and polishing.

Washing your RV:

How to Care for Your RV Finish

Keeping your RV looking its best at all times involves keeping the paint finish clean and in good condition. This means periodic washing and polishing, as well as getting the paint finish repaired as soon as possible when the paint is damaged or affected in anyway. The purpose of the paint finish is two fold:

(1) Provide an aesthetically pleasing appearance.

(2) To protect the vehicle from the environment.

Make sure the RVs surface temperature is not too hot, under 90 degrees

Fahrenheit, and not in direct sunlight. A shady area is ideal for washing your vehicle as direct sunlight causes water and soap to evaporate too fast, resulting in water spotting. Use a mild soap or detergent. Most auto care stores carry a car wash shampoo. Try to avoid combination wash-n-wax products as these waxes cause buildup and are designed for smaller surfaces. Have two dedicated sponges or wax mitts: one for the paint finish and one for the wheels and under carriage. Brushes or wash mitts that have plastic bristles are acceptable for use on tires and wheel wells, but are not intended for use on the paint finish.

Your RV is exposed to many environmental conditions that have an adverse effect on the paint finish:

1. ROAD SALTS AND SODIUM CHLORIDE Avoid using such items on painted surfaces, as they will damage the RV paint

E - 2 E - 3

E - 2

ExTERIOR

and finish. Wash the wheels and wheel wells first as this removes heavy dirt and debris and prevents it from splattering on already clean panels. Wet the entire area down to remove loose dirt and grime, hand wash one area at time using your dedicated paint finish sponge or wash mitt. Wash from the top and work your way down, frequently rinsing to minimize grit abrasion. Follow with a final rinse of water.

This process will remove most contamination from the RVs surface. For stubborn stains such as road tar, use an ammonia based glass cleaner or a small amount of rubbing alcohol on a damp cloth immediately followed by warm soapy water and rinse with clean water. This may not dissolve the road tar, but will loosen tar and bugs stains and remove them from the surface. Do not use solvent based cleaners on bird droppings or tree sap as these are water-based stains and will eventually dissolve using an ammonia based glass cleaner, warm soapy water and a little “elbow grease”. Once again, after removing stubborn stains immediately rinse with clean water.

Drying the RV is just as important as washing your vehicle as today’s tap water and well water contain many chemicals that could water stain your RVs finish.

We suggest using a damp natural or synthetic chamois, however, there are other drying products such as lint free micro-fiber towels that work just as well.

Follow the simple cautionary measures, and your new finish will give you maximum gloss and durability.

It is recommended that the caulking and sealant used in external seams and joints such as window frames, light bezels, beltline and rub-rail molding, etc., be checked regularly. If this material has dried out and becomes cracked or checked, or if a portion has fallen out, it should be replaced with fresh material to prevent possible rain leaks. Caulking and sealing material is available from your motorhome dealer and most RV supply stores.

Cap and Body Kit

The roof top cap and exterior body kit (excluding front bumper) provided by

Airstream is made from fiberglass. The front bumper is made from high impact plastic. This kit is made to color specifications and requires no paint or finish.

The cleaning procedures are the same as the painted finish on the Chevrolet body, however there are several automotive plastic care products on the market for exterior parts that will provide added protection from UV ray damage, dirt, and stains. Find one you like and use it as often as needed to help prevent fading.

E

E - 3

ExTERIOR

Roadside Exterior Features

NOTE: This is a basic explanation of the location and function of exterior features. More in depth explanations of certain feature’s care and maintenance is included in this manual in other sections.

5. Cable/Satellite TV inlet is located inside the utility hatch and is pre-wired for cable/satellite TV. A portable satellite dish can be connected and used in the cable connection.

6.. 110 Volt Power Cord Inlet, 30-amp service is required, power cord is stored inside the roadside storage compartment.

E

1. City Water Hook-up provides access for city water to your fresh water system. Use ½” minimum hose for water supply. Located inside RS utility compartment.

2. Exterior Shower outlet can be used on the water pump or with the city water hook up after hose assembly is inserted. Located inside RS utility compartment.

7. Storage compartment contains the 110 volt power cord

8. Body kit.

3. Utility compartment contains the city water hookup, exterior shower outlet, macerator, macerator switch, LP remote fill and shutoff, and black tank flush.

4. Electronic Ignition Water Heater Door and Vent is part of the plumbing system. The intake vent, drain plug and exhaust vent are located inside this door.

Regular maintenance by a qualified service technician is required to keep the water heater operating efficiently.

E - 4 E - 5

E - 4

ExTERIOR

Curbside Exterior Features

the galley.

NOTE: This is a basic explanation of the location and function of exterior features. More in depth explanations of certain feature’s care and maintenance is included in this manual in other sections.

6. MaxxAir Roof Vent, exhaust only, operating instructions are included in the manufacturer’s manual included with your owner’s packet. Keep all vents clear to encourage airflow.

1. Exterior 110 Volt Outlet provides an exterior GFI protected electrical source.

7.

Roof Air Conditioner

8. Power Boosted Omni-Directional TV Antenna is wired into TV outlets on exterior of coach and inside unit at entertainment center cabinet.

E

2. TV Outlet/12 Volt Power Port provides reception for an exterior television.

It is pre-wired and integrated into the Cable TV/Satellite TV system. There is also a 12 Volt outlet.

9.

Patio Awning operating and care instructions are including in this section of this manual.

3. Water Fill is used to fill the fresh water tank. Use only clean fresh potable water. This is located in the step well area inside the vehicle, between the double side entry doors.

10. Battery Box which holds 2-AGM batteries.

4. Furnace exhaust vent should be cleaned regularly. When operating furnace, be sure exhaust can escape into a well-ventilated area. Air coming from vent can be hot, when parking the motorhome, be sure to have proper clearance in venting area.

5. Porch Light is switched just inside the double door on the forward end of

E - 5

ExTERIOR

POWER PATIO AWNING

E

Manufacturer:

Carefree of Colorado

2145 W. 6th Avenue

Broomfield, CO 80020

Email: [email protected]

The Carefree Freedom Wall Mount Awning is a box awning that mounts to the curbside of your Airstream Avenue motorhome. It opens and the arms unfold at the push of a button. The support arms fold out of the lead bar when at eye level and within easy reach. The support arms adjust easily with flip lock controls. To retract, just fold the support arms up into the lead rail and push the button. The awning case will close and lock automatically.

The power patio awning is also equipped with an emergency manual override to use when power is not available.

NOTICE:

Never use the awning with damaged fabric.

Make sure the awning can be correctly rolled up. A damaged fabric does not allow a correct rolling up of the awning.

FABRIC CARE:

1. One of the best ways to keep the fabric looking good and to delay the need for deep, vigorous cleanings is to hose fabric off on a monthly basis with clear water. This practice will help prevent dirt from becoming deeply imbedded in the fabric.

2. When ready for a thorough cleaning, use a soft brush and warm water with soap.

3. When cleaning the fabric, it is important that you always use a natural soap, never detergent. Water should be cold to lukewarm - never to exceed 100 degrees F. Fabric should air dry only. Never apply heat to the fabric. Always allow the fabric to dry thoroughly before rolling up the awning.

CaUTiOn

: Do not use oil based cleaners or any caustic, granulated, or abrasive type cleaners on your Carefree awning.

AWNING USE IN WIND AND RAIN.

We remind you that the awning is a sun protection, so please roll up your awning in case of rain, wind or snow. If inclement weather should occur and

E - 6 E - 7

E - 6

ExTERIOR

cause water to ‘pool’ on top of the fabric, it is recommended that you retract the awning in steps to dump the water. Sections should not exceed 8-12”. By retracting in smaller sections, this should help prevent the fabric from stretching and distorting. Please read and understand all notes, notices and care instructions for your awning.

HARDWARE MAINTENANCE:

Periodically check all mounting hardware, screws, etc. and retighten if necessary. Replace any parts that are damaged.

MOTOR MAINTENANCE:

NOTE: IF WIND OR EXTENDED PERIODS OF RAIN ARE EXPECTED, ROLL UP

THE AWNING AND SECURE AS FOR TRAVEL!

nOTiCE

: THE EFFECTS OF WIND AND RAIN ON ANY AWNING ARE

UNPREDICTABLE. SEVERE DAMAGE TO THE VEHICLE AND OR THE

AWNING MAY RESULT AND CANNOT BE COVERED BY WARRANTY!

Check all wiring and connections for wear. Repair if necessary. Check that the sealant is providing a good seal and no water is able to get to the wiring.

E

The switch for the power awning is located on the forward side of the galley next to the side entry double doors.

ARM CARE:

NOTE: Awning will not extend while vehicle engine is running.

The best method of keeping the arms and braces operating smoothly is to clean them. Dirt and debris can cause the channels not to slide easily.

Periodically wash out the channels with running water to keep them clean. If the channels still do not slide easily, lightly spray the joints and /or inside of the channels with a dry silicone lubricant after the arms have been cleaned and dried thoroughly.

Fuse Location: Inside 12 volt AC/DC power center under rear lounge inside vehicle.

E - 7

INTERIOR

The interior of your Airstream motorhome has been designed to take a limited amount of space and provide you with all the comfort, convenience, durability and appearance possible. An understanding of the operational procedures and maintenance techniques of the interior appointments will add to your pleasure, as well as to the long life of your motorhome.

Driver and Passenger Seats

way. (clockwise for driver, counter clockwise for passenger) At half way, move seat to the rear, then complete swivel. This will give adequate clearance for the back of the seat, skirting and door areas. Be careful not to move too quickly, as you do not want to damage the seats. To return to normal locked position, swivel half way and then move seat forward. Remember, don’t move it too far forward that the seat will not clear the console. Complete swivel until seat locks in place.

F

The driver and passenger seats are provided by Chevrolet and then sent out to be recovered by Airstream to match the interior decor.

The seat adjustment mechanisms provided by Chevrolet allows the seat to be moved forward or backward and recline. The driver’s seat has power controls which are located on the front of the bottom seat. The passenger seat has a release bar under the front of the seat that is used to move the seat forward and backward. Both driver and passenger seat have an inboard handle installed that allows for reclining.

Lumbar and other seat adjustments are part of the reupholstered Chevrolet seat and their operation is explained in the Chevrolet manual.

dangEr:

Adjust the driver’s seat so that you can easily reach and operate all controls. Make sure seat is locked in position. Do notadjust driver’s seat while vehicle is moving. The seat could move nexpectedly causing loss of control.

Captain’s Chairs, 2nd Row

To swivel the driver and/or passenger seat, you may find it helpful to be standing. It is also necessary for the steering wheel to be in the lowest set position.

Return seat to full upright position before using swivel adjustment. Move seat forward towards dash, but not so much that the seat will not clear the console when swiveled. Pull knob on inboard side of seat base, and swivel about half

The captains chairs have 3 adjustments. A lever on the right side of the seat reclines the seat back. A lever on the seat pedestal under the front of the seat allows the seat to be adjusted forward or back, and a lever on the left side of the seat allows the seat to swivel. Return seat to full upright position before using swivel adjustment.

F - 1 F - 2

F - 1

INTERIOR

Smoldering smoking material can cause upholstered furniture fires.

nOTiCE

: Seat backs on cab and 2nd row seats must be returned to full upright position and seat moved forward before seat is swiveled.

Failure to do so could result in damage to the seats upholstery, the wall panels, and the seat decorative skirt.

Pedestal Table

Rear Lounge/Bed

The rear lounge transforms into a rear bed. The power lounge is operated by a switch located on the roadside wardrobe wall. Press switch to lower seat back.

Clean leather coverings with standard products used for that purpose.

Follow instructions on the cleaning products container.

The dinette table is a pedestal table. The pedestal is stored in the front overhead behind the television. The table is stored behind the roadside captain chair. The pedestal table can be placed in floor mounted threaded holders located between the 2nd row captain chairs. The pedestal is inserted into the floor cups and twisted to lock into place. The table top is made of Corian and can be cleaned with soap and water, or you can use a common solvent on tough spots. Be sure no abrasive cleaner is used, as there is the possibility it could scratch the surface. A protective pad should always be placed under hot utensils.

F

NOTE: Never remove cushion covers for separate dry cleaning or washing. Any tumble cleaning method can destroy the backing, shrink or otherwise damage upholstery fabric.

Warning

: Return table top and pedestal to their respective storage positions before moving vehicle. In a emergency stop or accident the top and pedestal could cause personal injury and /or death.

Warning

: Keep your furniture and family safe from fires caused by careless smoking. Do not smoke when drowsy. Remove immediately any flowing ash or a lighted cigarette, which falls on furniture.

F - 2

INTERIOR

Vinyl Floor Wet Bath

The vinyl floor in your unit can be cleaned and waxed with products recommended for vinyl floors.

CaUTiOn

: Warn occupants entering the vehicle when the floor is wet or fresh wax has been applied. Just like a home, the floor can be slippery and falls are possible.

F

Cabinets/Overhead Lockers

To clean your fiberglass shower stall unit, use warm water and one of the stronger liquid detergents. Do not use abrasive cleaners; they may scratch and dull the surface of your fiberglass unit. Stubborn stains can be removed with solvents such as turpentine, paint thinner or acetone. Restore dulled areas by rubbing with an automotive-type liquid cleaner, and then put the soft glow back into the sides of your unit with a light application of liquid wax. DO NOT wax the shower bottom as it may become slippery leading to a fall.

Galley Sink

The furniture is manufactured from a high-pressure laminate and can be cleaned with soap and water, or you can use a common solvent on tough spots. Furniture polish can be used sparingly. Glass doors must be cleaned with a anti-static cleaner and cloth. Windex or common ammonia products will damage the coating on the surface.

To use: Remove lid and store in the drawer located above the refrigerator.

To clean: Sink cover is made of Corian and can be cleaned with soap and water, or you can use a common solvent on tough spots. Be sure no abrasive cleaner is used, as there is the possibility it could scratch the surface. A protective pad should always be placed under hot utensils. For the stainless steel sink, any stainless steel (non-abrasive) cleaner is fine. Notice: Do not use any abrasive material such as abrasive cleaners, cloths and pads, as there is the possibility they could scratch the surface. A protective pad should always be placed under hot utensils. Notice: Do not use any abrasive cleaners or cloths on surfaces.

F - 3 F - 4

F - 3

INTERIOR

Metal Galley Backsplash

The metal interior skin on the galley backsplash is coated with a baked on acrylic coating. Use soft rags or wash mitts always moving lengthwise with the grain of the aluminum. NEVER rub hard on the coating. Oil, grease, dust and dirt may be removed by washing with a 5% solution in water of commonly used commercial and industrial detergents. Cleaning should be followed by a thorough clean water rinse. Drying the metal with a chamois or a soft cloth may prevent spots and streaks. WHEN WASHING OR WAXING THE METAL,

ALWAYS WIPE “WITH” THE GRAIN OF THE METAL.

After cleaning and drying, a good grade of nonabrasive automotive paste or liquid wax once a year will increase the life of the finish and help remove minor scratches and abrasions. It will also protect the metal from minor scratches and make subsequent cleaning easier.

NOTICE: ABRASIVE POLISHES OR CLEANING SOLVENTS SUCH AS

AUTOMATIC DISHWASHER OR ACID ETCH CLEANERS ARE TOO STRONG

AND SHOULD NEVER BE USED. RINSE ALL GRIT FROM SURFACE PRIOR

TO WASHING. Use soft rags, always moving lengthwise with the unit. NEVER rub hard on the coating. Even the softest rag will damage the coating if excessive pressure is applied.

Upholstery

All materials should be professionally dry cleaned to remove any overall soiled condition. Spot clean, using a mild water free solvent or dry cleaning product.

DO NOT SATURATE THE FABRIC. Carefully follow instructions on such products. Clean only in a well-ventilated room. Avoid any product containing carbon tetrachloride, which is highly toxic. Pretest small area before proceeding. Use a professional furniture cleaner when an overall soiled condition is reached.

F

If a substance is found on the coating that cannot be removed by normal washing procedures, Airstream recommends using DX 330 Acryli-Clean made by

PPG Industries. Follow all directions and warnings on the product container.

Acryli-Clean should be used by trained personnel only, using the proper equipment under controlled conditions. Use the Acryli-Clean as sparingly as possible to remove oil or grease. Rinse with cool water immediately after use.

Counter Tops

The counter top is made of Corian and can be cleaned with soap and water, or you can use a common solvent on tough spots. Be sure no abrasive cleaner is used, as there is the possibility it could scratch the surface. A protective pad should always be placed under hot utensils.

F - 4

INTERIOR

Light Bulbs Privacy Curtain

All interior lights are sealed LED requiring fixture replacement if a light burns out or malfuctions. the exterior lights require relacement also except for the porch light which uses a B7038 bulb replacement.

F

dangEr

: Always replace the light bulb or light fixture with the correct bulb or matching fixture for that light. Always be sure power is tuned off and bulb or fixture is cool before removing. Take proper precautions on a broken bulb or fixture to prevent lacerations. Failure to heed these warnings could cause fire, property damage, personal injury, or death.

Privacy curtains are provided for the front windshield and cab windows. The curtains have pockets sewn into them that slide over the sunvisors and attach with additional velcro and elastic straps.

Light brushing with an upholstery brush or gentle use of a vacuum cleaner will suffice in most situations. For heavy soiled conditions Dry-Clean only. Washing the curtain may void the warranty.

Privacy Curtain

F - 5 F - 6

F - 5

Draperies

NOTICE: All drapery materials must be professionally dry-cleaned.

Unsnapping from the wall, removing a screw or pop rivet from the end of the curtain track, and sliding them out will remove the draperies. The pop rivets are removed by drilling through the head with a 1/8” drill bit.

INTERIOR

F

F - 6

PLUMBINg

LPG SYSTEM

batteries.

G

Your motorhome is equipped with a permanently mounted tank for LPG (Liquid

Petroleum Gas) with a remote fill and remote gas supply shut off switch. LPG burns with a clean blue flame, Propane is used where subfreezing temperatures are common, since it freezes at -40° F. How long a full tank of gas will last is dependent on usage. In cold weather, when you are using the furnace, or when you use large amounts of hot water, or cook extensively, you will naturally use more than you will in warm weather, or when you may do limited cooking. On the average, with normal cooking and other appliance use, you can probably count on two to four weeks of usage from the tank.

If you have allowed the tank to run out, air may have gotten into the lines. In this event the air must be forced out through the lines by gas pressure before you can light the pilots. Hold a match to the pilot of the appliance closest to the tanks until it lights and stays lit. Then move to the next closest, etc.

Warning

: Only certified LP suppliers should fill the LP Tank.

Turn remote gas supply switch off before filling or refilling LP tank. torhome.

Warning

: Always shut off the LP gas when refueling the mo-

Remote Gas Supply Switch

A remote (toggle) switch for shutting off the gas to all appliances is located in the same compartment. The switch activates an electric solenoid that opens and closes, shutting the gas off at the tank. This switch should be turned off during the filling of the LP tank.

NOTE: The electric gas shut-off solenoid closes automatically when 12-volt power is disconnected. It will reopen when power is restored.

LP TANK REMOTE FILL

The LP tank in filled by accessing the remote fill hook up located in a roadside utility compartment. Be sure the fill is free of dirt. It may help to remind your

LP supplier to only use a clean fill hose to fill your tank. Turn off the remote switch when the LP system is not in use, as it draws 12 volt current from the

Warning

: All pilot lights and appliances must be turned off during refueling of motorhome fuel tank and permanently mounted LPG tank.

Gas lines should be checked periodically for leaks with ammonia free soapy water.

G - 1 G - 2

G - 1

PLUMBINg

BASIC RULES FOR SAFETY

dangEr

: Do not use open flame to search for problems. If gas can be smelled, appliance pilots fail to stay on, or any other abnormal situation occurs, use the remote supply switch to shut off the tank valve immediately and call on a qualified LPG service center or Airstream

Service Center.

dangEr

:

DO NOT store LP containers within vehicle. LP containers are equipped with safety devices that vent gas should the pressure become excessive.

CaUTiOn

:

Moisture in the LPG tank will cause a malfunction of the regulator in controlling proper pressure. This may result in the flame lifting off the burner, or the flame may go out frequently. Many refueling stations will add approximately ¼ to ½ gallon of alcohol to lower the moisture temperature. Moisture will then pass through the regulator without the formation of ice crystals.

LPG Regulator

DO NOT use cooking appliances for comfort heating. Cooking appliances need fresh air for safe operation. Before operation open overhead vent or turn on exhaust fan and open window.

A warning label has been located in the cooking area to remind you to provide an adequate supply of fresh air for combustion. Unlike homes, the amount of oxygen supply is limited due to the size of the recreational vehicle, and proper ventilation when using the cooking appliances will avoid dangers of asphyxiation. It is especially important that cooking appliances not be used for comfort heating as the danger of asphyxiation is greater when the appliance is used for long periods of time.

G

The LPG regulators used on Airstream motorhomes are designed for lowpressure service, with a normal outlet pressure setting of 11.5 inches water column. Only personnel trained in the proper procedures, codes, standards, etc., should service regulators. Have the regulator inspected each time the tank is refilled. Replace any regulator that has had water in the spring case, or shows evidence of external corrosion, or corrosion inside the spring case.

Portable fuel burning equipment, including wood and charcoal grills and stoves, shall not be used inside the recreational vehicle. The use of this equipment inside the recreational vehicle may cause fires or asphyxiation.

G - 2

PLUMBINg

A Warning Label has been located near the LP gas container. This label reads: DO NOT FILL CONTAINER (S) TO MORE THAN 80% PERCENT OF

CAPACITY. Overfilling the LP gas container can result in uncontrolled gas flow that can cause fire or explosion. A properly filled container will contain approximately 80 percent of its volume as liquid LP gas. in excessive gas pressure causing fire or explosion.

The regulator at the L.P. tank is under a gray plastic cover. The protective cover certainly helps to keep the vent on the regulator from being clogged by wasps or ice, but should still be checked regularly to make sure the vent remains clear.

Do not bring or store LP gas containers, gasoline or other flammable liquids inside the vehicle because a fire or explosion may result.

dangEr

: Do not attempt to seal regulator cover.

dangEr

: If you smell gas:

G

1. Extinguish any open flames, pilot lights and all smoking materials.

2. Do not touch electrical switches.

3. Shut off the gas supply using the remote shut off switch.

4. Open doors and other ventilating openings.

5. Leave the area until odor clears.

6. Have the gas system checked and leakage source corrected before using again.

Warning

: Check vent each time tank is filled to make sure it is clear of obstructions.

Gas Regulator Removal/Replacement

LP gas regulators must always be installed with the diaphragm vent facing downward. Regulators that are not in compartments have been equipped with a protective cover. Make sure that regulator vent faces downward and that cover is kept in place to minimize vent blockage that could result

1. Shut off main gas supply at the tank.

2. Remove the plastic protective cover from the regulator assembly.

3. Using two wrenches, one to hold the line fitting and one to turn the flare nut, disconnect the regulator from the flexible rubber line.

4. Disconnect the regulator from the tank fitting. Remove regulator.

5. To replace, reverse the removal procedures.

G - 3 G - 4

G - 3

PLUMBINg

LPG CONNECTIONS

A quick connect LPG connection is located to the left of the hitch receiver on the rear of the vehicle. It is a utility connection to use for an outside grille or other LPG appliance.

Before using a water system, check that the water heater by-pass valve is turned to the use position. The by-pass valve is located on the back of the water heater under the lounge on the roadside, accessed by opening the rear cargo doors and reaching under the lounge. See Winterizing and Storage for further information on the By-Pass. Check that the exterior water heater drain plug is installed. Close all low point drain valves and the fresh water tank drain valve.

The connections are relatively easy to use. Check that the remote LPG shut off switch is turned completely off. Slide the collar on the female end back and plug the male hose into the connection. Release the collar and check that the hose is properly connected by giving a firm pull on the hose. Turn the LPG remote shut off switch on and recheck all connections to the appliances and quick connection to be sure no leaks are present.

To operate the system with the water pump:

Follow all instructions, cautions, and warnings presented in this manual when connecting and disconnecting appliances.

WATER SYSTEM - SELF-CONTAINED

Fill the water tank by opening the exterior gravity feed water fill door. A garden hose can now be inserted or use a clean bucket and funnel to fill the tank. It’s a good idea to let the water run through a hose for a short time to flush it out.

RVers sometimes fill their tanks with “home” water to avoid strange water that may be distasteful to them on short outings. Remember the more water you carry in the fresh water tank, the less cargo carrying capacity you have for other items.

G

The fresh water system consists of a city water hook up, fresh water tank gravity fill, fresh water tank and drain valve, water-pump, pump filter, hot and cold water lines, water heater, fresh water line low point drain valves, and faucets.

Full explanations on the locations and use of these features are explained in this section.

The amount of water in the tank may be checked on the Monitor Panel, or you may fill the tank until water overflows out of the fill.

Fill the water heater by opening the hot side of either the galley, wet-bath, or exterior shower faucet and turning on the water pump switch located under the

G - 4

PLUMBINg

galley roof locker or by connecting to an exterior city water source. Close the cold side of all faucets. For some time the open faucet will only sputter. This is because the water heater is being filled and air is being pushed out through the lines. Once the water heater is full, a steady stream of water will come from the faucet. nOTiCE

: Turn the water pump off when the motorhome is left unattended.

Now open a cold faucet. It will sputter for a short time, but will soon expel a steady stream. All other faucets can now be opened until all air is expelled.

G

Once the system is filled with water and the faucets are closed, the water pump will shut off. When a faucet is opened the pump will come back on automatically. If the faucet is just barely open it is normal for the pump to cycle on and off rapidly.

It is normal for a pump to occasionally cycle when all faucets are off to keep the water pressure at the set point. However, if it cycles frequently (more than a few times an hour) the plumbing system, pump, and pump strainer should be checked to be sure it is not loosing pressure through a slow water leak or back through the pump.

nOTiCE

: To prevent equipment damage, the water heater should only be started after the water system is primed and ready for use.

G - 5 G - 6

G - 5

PLUMBINg

Water Pump And Strainer

Manufacturer:

USA

Flojet

20 Icon

Foothill Ranch, CA 92610

Phone: 949-859-4945

Canada

Fluid Products Canada

55 Royal Road

Guelph, Ontario, N1H 1T1

519-821-1900

The inlet and outlet hoses and the strainer assembly are held in place by self sealing blue quick connect fittings. To disconnect a hose or the strainer, grasp the blue tab on the female fitting by the grooved finger edges and pull straight out on the tab. This will release the male fitting connected to the hoses and strainer. Be sure that both the female and male fitting on the disconnect are free of all debris and are not damaged before replacing.

Check the pump system for leaks anytime the disconnect fittings on the hoses and/or strainer are removed.

The water pump and strainer are located under the sofa, on the curbside.

Access can be made through rear double doors. The strainer should be visually checked for accumulation of sand or debris that could affect water flow.

nOTiCE

: Failure to check the quick disconnect fitting for water leaks when reinstalling inlet and outlet hoses or the water pump strainer may cause the pump system to leak causing damage to personal property

G

To clean the strainer screen:

With the clear plastic at the top press on the sides of the strainer releasing the tabs holding the clear plastic top in place, hold the sides in and pull straight up on the clear plastic top to remove the screen assembly. Rinse all debris from the screen. Replace the screen assembly by aligning the screen in the seating grooves and pressing gently down until tabs catch and hold the clear plastic top in place.

Quick

Disconnect

Fitting

Blue

Finger

Tab

G - 6

PLUMBINg

To operate the system using a city water source: Sanitizing

CITY WATER HOOKUP

The city water inlet is a standard garden hose thread. Use a high-pressure hose of at least ½ “ diameter designed for RV use made from material that is tasteless, odorless, and nontoxic. We suggest you carry two lengths of hoses so you have the ability to reach hookups further away than normal, plus you have a spare should one fail or become damaged unexpectedly.

G

After hooking up the hose and turning on the city water valve provided in the park, slowly open a faucet. There will be a lot of spurts and sputtering until all the air is expelled from the motorhome system. Be sure to turn the water heater bypass to the normal flow position as described earlier in this section so it will fill. If the water heater is empty it will take some time before all the air is expelled and you get a steady flow of water at the faucet. Once a steady flow is achieved at one faucet, the others should be opened long enough to expel the air in the lines going to them.

Your plumbing system has a built in pressure regulator to protect your lines and faucets from extremely high pressures on some city water systems. An after-market external regulator is not recommended, as it could lower the water pressure at the inlet and thus to your faucets and shower.

Potable water systems require periodic maintenance to deliver a consistent flow of fresh water. Depending on use and the environment the system is subject to, sanitizing is recommended prior to storing and before using the water system after a period of storage. Systems with new components, or ones that have been subjected to contamination, should also be disinfected as follows:

1. Use one of the following methods to determine the amount of common household bleach needed to sanitize the tank.

A) Multiply “gallons of tank capacity” by 0.13; the result is the ounces of bleach needed to sanitize the tank.

B) Multiply “Liters of tank capacity” by 1.0; the result is the milliliters of bleach needed to sanitize the tank.

2. Mix into solution the proper amount of bleach within a container of water.

3. Pour the solution (water/bleach) into the tank and fill the tank with potable water.

4. Open all faucets (Hot & Cold) allowing the water to run until the distinct odor of chlorine is detected.

5. The standard solution must have four (4) hours of contact time to disinfect completely. Doubling the solution concentration will allow for contact time of one (1) hour.

6. When the contact time is completed, drain the tank. Refill with potable

G - 7 G - 8

G - 7

PLUMBINg

water and purge the plumbing of all sanitizing solution.

7. Remove, rinse and fush the galley in-line filter completely after santizing.

The filter is located under the galley. It can be accessed by removing the galley drawer and removing the false galley back panel.

NOTE: The sanitizing procedure outlined above is in conformance with the approved procedures of RVIA ANSI A 119.2 and the U.S. Public Health Service.

EXTERIOR SHOWER HOOKUP

HEATED FRESH WATER TANK

The Avenue motorhome has 12-Volt heat pads installed with all holding tanks to help prevent freezing. The tank pads are controlled by a lighted switch located in the curbside rear overhead locker. The switch is lit when the pads are on. Battery power will last about 4 hours unless the unit has a 120-volt source

(generator or shoreline) to operate the inverter/charger. To conserve battery power in a remote location, RV antifreeze may be used to protect the black and grey tanks in freezing conditions.

An exterior shower hookup is provided for your convenience. The shower valve/ hose assembly is located inside the roadside utility compartment. To use: lift the hinged exterior cover, attach the shower head and hose assembly onto the mounted shower hookup. Be sure to remove and drain the hose and open the valves before opening the low point drain lines for winterization.

DRAIN VALVE LOCATIONS

Drain and shut off valve positions open close

INTERIOR SHOWER HOOKUP

The interior shower hookup is mounted on the upper portion of the bath wall, to the left of the toilet. To use: attach the shower head and hose assembly onto the mounted shower hookup. Be sure to remove and drain the hose and open the valves before opening the low point drain lines for winterization.

Waterline

The fresh water system has four fresh water line low point drain valves. There are two under the lounge on the curbside that can be accessed through the rear double doors and there are two located in the roadside utility compartment behind the city water hookup connection.

The fresh water tank drain valve is located on the bottom of the tank under the motorhome on the curbside.

G

G - 8

PLUMBINg

TOILET

Manufacturer:

Thetford Corporation

7101 Jackson Road

Ann Arbor, MI 48103

313-769-6000

Canada:

Thetford Sanitation Ltd.

2710 Slough Street

Mississauga, Ontario

Canada, L4T 1G3

Trouble Shooting

1. Leaks: a) Back of toilet: check water supply line connection at water valve. Secure or tighten as necessary. If leak persists from water valve, replace. b) Vacuum breaker leaks while flushing: replace Vacuum Breaker or water module, depending on model. c) Between closet flange and toilet: check flange nuts for tightness. d). If leak continues, remove toilet and check flange height. Use

Thetford spacers to adjust, if necessary, to 7/16” above floor.

Replace flange seal.

G

The RV toilet in your Airstream is a design that has been used for many years.

It has a big, easy to use single pedal flush system. To flush, press the pedal completely. To fill the bowl with water, press halfway.

For additional information, please consult your Thetford manual.

nOTiCE

: When you dump the bowl of the toilet make sure all paper and solids have cleared the slide mechanism before you allow it to close.

Failure to do so can cause the groove for the slide to become jammed and the slide will no longer close completely.

2) Toilet won’t hold water: a) Check for and remove any debris from blade/ball seal track. b) Check blade/ball seal compression with mechanism.

If blade/ball seal is worn, replace.

If the problem should occur, a small nail or bent clothes hanger can be used to

“pick” the material out of the groove.

3) Harder than normal pedal or hand lever operation: Apply light film of Thetford

Toilet Seal Lubricant & Conditioner or silicone spray to blade/ball. (Note: To avoid damage do not use spray lubricants other than silicone.)

4) Poor flush: Pedals or hand levers must be held fully open during flush. A good flush should be obtained within 2 to 3 seconds. If problem persists, re-

G - 9 G - 10

G - 9

PLUMBINg

move the water supply line and check flow rate. The flow rate should be at least ten quarts (9.5 liters) per minute.

Toilet Winterizing

MAINTENANCE

Draining Method: Turn off RV’s water supply. Drain toilet bowl. Disconnect supply line at water valve. Completely drain the toilet’s water supply line.

If the bowl-sealing blade does not operate freely after extended use, it may be restored to its original, smooth operating condition by applying a light film of silicone spray to the blade. To clean the toilet, use Thetford Aqua Bowl or any other high grade, non-abrasive cleaner. Do not use highly concentrated or high acid content household cleaners. They may damage the rubber seals.

REMOVAL

nOTiCE

: To avoid damage, when using air pressure to blow water from the lines, be sure toilet valve is in the open position.

nOTiCE

: If water is frozen in the toilet, do not attempt to flush until the ice thaws.

Antifreeze Method: Use RV (potable) antifreeze only.

G

1. Shut off water valve behind toilet or main water supply and flush toilet. nOTiCE

: Never use automotive type antifreeze.

2. Disconnect water supply line from toilet. You will probably find a small mirror very useful.

For Thetford service centers: USA 1-800-521-3032

Canada: 1-888-215-5410

3. Remove mounting nuts. Toilet is then ready for removal.

4. Cover riser or tank inlet with cardboard to prevent debris from falling into tank.

NOTE: Always replace flange seal when toilet has been removed.

NOTE: The Avenue Suite model has a Sealand 8100 series MasterFlush toilet.

Please review the manual included with the owner’s packet for operating and winterizing instructions.

G - 10

PLUMBINg

STORAGE AND WINTERIZING

NOTE: Contact your local Chevrolet dealer for additional storage and winterizing information.

the macerator pump. Run until the anti-freeze comes out the end of the pump hose. Leave dump valves open. As extra protection, open the toilet valve and add a cup of non-toxic RV anti-freeze to the black tank and pour a cup of nontoxic antifreeze into a sink drain to protect the holding tanks and valves from residual water freezing. (This is very important, as the frozen sewage could seriously damage the tank.)

G

When storing your motorhome, use the same precautions as you would in your own home in regard to perishables, ventilation, winterizing, and rain protection.

In addition, for prolonged storage periods flush out all the drain lines and waste holding tanks. Also drain the entire water system, including the water heater and the fresh water holding tank. Instructions for draining the water system are explained in the following paragraphs on winterizing.

Twice a year, or after a long storage period, we suggest you take your unit into your Airstream dealer for a check-up and cleaning of the gas operated appliances.

NOTE: The Avenue Suite model has a Sealand 8100 series MasterFlush toilet.

Please review the manual included with the owner’s packet for operating and winterizing instructions.

To completely winterize your motorhome follow this procedure:

The main consideration in winterizing is to guard against freezing damage to the fresh water lines, the waste drain lines, the waste holding tanks, the water heater, and the batteries.

Plan your winterizing ahead and be sure the holding tanks are drained and flushed thoroughly at a proper disposal station. After dumping tanks add a quart or two of RV non-toxic anti-freeze to one of the holding tanks and start

1. Level the motorhome from side to side and front to rear, turn the water pump off and disconnect the city water.

2. Open all the hot and cold water faucets.

3. Open the low point drain valves for the hot and cold water lines, the fresh water tank drain valve, and water heater drain. There are four fresh water line low point drain valves. There are two under the lounge on the curbside that can be accessed through the rear double doors and there are two located in the roadside utility compartment behind the city water hookup connection. The fresh water tank drain valve is located on the bottom of the tank under the motorhome. The water heater drain valve or plug is located on the

G - 11 G - 12

G - 11

PLUMBINg

water heater and is accessible through the exterior water heater access door.

Remove the plug or open the valve and allow water to drain. If a level surface is not available, park the motorhome facing slightly uphill until water draining ceases and then downhill until water draining ceases.

4. Follow winterizing instructions for your toilet on the preceding page of this manual.

5. While the water is draining from the systems remove, drain, and store the wet bath and the exterior shower hoses and shower heads.

6. After the water has stopped running, apply at least 60 lbs. of air pressure at the city water inlet. This can be accomplished at a service station if no air compressor is available. Air fittings with regulators can be purchased for the city water inlet. Be sure the toilet flush valve and shut off valve, all drain valves, and faucets are open and the pump outlet hose is disconnected.

7. Water pump: Remove quick connect outlet fitting from the pump and turn the pump on just for a second to pump out any remaining water from the pump head and lines from the tank. Check the water pump strainer to be sure no water remains. There should be very little water if the tank is drained. Be sure to have a catch pan or a rag under the pump to prevent water from spilling into the RV. Leave the fittings disconnected from the pump until the system is ready to be used again. Leave a note on the water pump switch that the plumbing is not connected.

8. Remove the house batteries from your motorhome and store in a cool dry place where there is no danger of freezing. It is very important for optimum life of your battery to check it periodically and to keep it fully charged. This is especially true in winter months, when the temperature may drop below freezing. If the period of storage is for 30 days or less, you may turn off the battery disconnect switch rather than remove the battery. Continue to check and recharge the battery as needed, at least weekly in severe weather.

9. Remove any items (food, cosmetics, etc.) from the interior that might be damaged by freezing, or might damage the motorhome if containers break.

For additional winterizing protection, add non-toxic antifreeze (approved for drinking water systems) to your water lines using the following procedure:

1. Reconnect all lines except the one to the pump inlet port and close all drain valves.

2. Turn the water heater bypass valve to its bypass position. The valve is located on

WATER

HEATER TOP

HOT WATER LINE

BYPASS

LINE

COLD WATER LINE the back of the water heater and accessed through the rear doors under the curbside rear lounge seat.

Open

Hot

Water Outlet

Cold

Water Inlet

Valve Handle Positions

Closed

G

G - 12

PLUMBINg

G

3. Attach a length of hose to the pump inlet port. This piece of hose should be long enough for the free end to be inserted into and reach the bottom of a non-toxic RV antifreeze container.

4. Check that all interior water faucets are still open.

5. Insert hose length into container containing non-toxic RV antifreeze, turn the pump on, and run the water pump until the antifreeze solution fills all water lines. Flush toilet.

6. Open exterior shower faucet until anti-freeze comes out hose, shut off valve, remove and drain valve/hose assembly.

7. Close water fixtures as the antifreeze begin to come out. Shut off pump when antifreeze has been distributed through out system, then reopen all faucets to relieve pump pressure.

8. Disconnect the hose length from pump inlet fitting and reconnect water system inlet line.

faucets signaling anti-freeze is flushed out of lines. Go back and recheck water clarity at all faucets.

Turn off water pump.

7.

8.

9.

Hook up city water, open faucet valves, and recheck water clarity.

Replace water heater plug or close drain valve and reset water heater by-pass to the “in use” position.

10. Fill water heater.

Instructions for Winterizing San-T-Flush System

1. Connect a hose to the San-T-Flush City Inlet.

2. The hose must be attached to a water pump (pressure port).

3. A second hose must be submersed in a container of RV non-toxic propylene glycol antifreeze.

4. Turn on water pump until you see the fluid run out tank, or hear the fluid enter the tank via the jet heads.

3.

4.

5.

6.

Restoring Service

1. Re-install fully charged house batteries.

2. Close low point drain valves, holding tank dump valves, water faucets, and fresh water tank drain.

Reconnect water pump line.

Add water to the fresh water tank.

Turn water pump on.

Open and close faucet valves one at a time until water runs clear at all

In line Water Filter

CaUTiOn

: Do not allow filter to freeze with water in it.

The filter is located under the galley. It can be accessed by removing the galley drawer and removing the false galley back panel. Remove, drain, and store the inline water filter in a zip lock bag in a refrigerator (for up to 3 months). Rinse and fush filter completely before reinstalling to restore service.

G - 13 G - 14

G - 13

PLUMBINg

DRAIN AND WASTE SYSTEM

The drain and waste system of your motorhome includes separate grey and black tanks, manual dump valves for each holding tank, a macerator pump, and a high pressure hose with a drip proof valve.

This self contained system enables you to use the toilet, sink, and wet bath until a suitable disposal facility is available. liquefies all waste and tissue normally found in recreational vehicle waste systems and then passes it through an extra heavy duty 1” diameter discharge hose. At the end of the hose is an easy-to-use threaded nozzle that is designed to fit securely (lock) into a variety of dump station inlets, keeping you clean and ending the need for additional adaptors. The nozzle has a screw on cap that really keeps the entire operation easy and clean. The cap prevents drips and spills during storage, making the unit more sanitary and less odorous than the old style 3” diameter sewer hoses.

The Macerator Pump

Macerator Pump

CaUTiOn

: The waste hose is pressurized when operating macerator pump. Secure loose hose end at disposal facility with supplied inlet adaptor before turning on pump.

G

Manual

Impeller

Screw

Discharge

Port Adaptor

The high pressure waste hose connects to the Discharge Port Adaptor. The hose is stored inside the roadside utility compartment. The macerator pump has an individual ON/OFF toggle switch, also located inside the roadside utility compartment.

The portable waste pump is the ideal solution for emptying holding tanks on recreational vehicles and avoiding dump station incidents.

Each holding tank is equipped with a manual dump valve handle.

This twist on system has a bayonet attached to the pump head and twist mounts directly onto the RV dump valve. The macerator section grinds and nOTiCE

: Do not run the pump dry, as this will damage the macerator.

THE MACERATOR WILL NOT HANDLE HARD SOLID OBJECTS, SANITARY

G - 14

PLUMBINg

NAPKINS OR RAGS. Never put wet strength paper towels, tissues, or sanitary napkins in your holding tank. They won’t dissolve and will jam the mechanism of the dump valve and the macerator pump impeller. Colored toilet tissue is slower to dissolve than white. Most RV accessory stores offer tissue designed for RVs that will completely dissolve.

To empty the black and grey holding tanks:

3. Turn on macerator pump to liquefy and pump out the solids in the tank.

4. When black tank is empty, turn off the pump.

5. Open the gray water tank valve and turn on pump. Run until just before pump runs dry. Any trickle of grey water left will remain in discharge hose behind drip proof valve and is typical. Remember, running the pump dry for more than 30 second seconds could damage the pump.

6. Turn the drip proof valve off and remove the hose adaptor from the dump station inlet. Place hose in the utility compartment and close the compartment door.

nOTiCE

: Watch all connections while dumping, close dump valve immediately, turn off pump, and close hose drip proof valve if a leak is noticed.

G

1. Remove the high pressure waste hose by opening the compartment door and manually pulling out the hose. Secure the hose at the disposal facility inlet using the provided adaptor and open the drip proof valve on the end of the hose. IMPORTANT: The pressure from the macerator pump may push the hose from the inlet if hose is not secured properly.

2. Open the black water valve. We recommend emptying the black tank first, using the grey water to help flush the pump and hose of black water sewage.

Macerator Impeller Release Feature

After long periods of non-use, a stuck impeller can be easily broken loose with a screwdriver inserted in the motor shaft slot. Turn shaft clockwise as shown.

Please refer to your Thetford manual for additional instructions, warnings and helpful troubleshooting suggestions

G - 15 G - 16

G - 15

PLUMBINg

Macerator Applications

Aux.

Tank

Macerator

Pump

Toilet

Dump Station or Home Sewer

Holding Tank

Cleanout

Empty holding tanks when no dump stations are convenient.

Transfer waste from holding tank to an auxiliary tank.

The macerator pump can be used to empty the holding tank into any convenient sewer receiver such as a sewer clean-out at your home.

to an unpleasant cleaning job. Should solids accumulate, fill the tank about half full with water, then drive the motorhome for a few miles. Don’t wait until the tank is packed solid. The turbulence and surging of the water will usually dissolve the solids into a suspension so the tank can be drained. Draining the tanks as described will protect them from freezing during storage. Use a winterizing solution designed for RV use as needed to prevent freezing of holding tanks in wintery conditions.

Winterizing Pump

Extended Stays

When you are in a park with a disposal facility, empty the tanks every few days or whenever they become almost full. PUMPING A LARGE VOLUME OF

LIQUID THROUGH THE TANKS AT A TIME WILL HELP KEEP TOILET PAPER

AND OTHER SOLIDS COMPLETELY WASHED AWAY. Remember to empty the black water tank first and then the gray tank using the gray water to flush the system.

Plan your winterizing and storage ahead and be sure the holding tanks are drained and flushed thoroughly. This is very important, as the frozen sewage and water could seriously damage the system. After dumping tanks add a quart or two of RV non-toxic anti-freeze to one of the holding tanks and start the macerator pump. Run until the anti-freeze comes out the end of the pump hose. Leave dump valves open. As extra protection, open the toilet valve and add a quart of non-toxic RV anti-freeze to the black tank and pour a quart of non-toxic antifreeze into a sink drain to protect the holding tanks, valves, and pump from residual water freezing.

HEATED TANKS

G

This practice will avoid the accumulation of solids in the tank, which could lead The Avenue motorhome has 12-Volt heat pads installed with all three holding

G - 16

PLUMBINg

tanks. The heat pads lighted switch is located in the curbside rear overhead locker. The switch lights up when the pads are on. Battery power will last about

4 hours unless the unit has a 120-volt source (generator, shoreline) to operate the inverter/charger. To conserve battery power or fuel in a remote location,

RV antifreeze may be used to protect the tanks in freezing conditions. PLAN

AHEAD. In extreme cold weather the heating pads may not suffice in keeping the tanks from freezing, be safe and winterize.

detergent or abrasive cleaners. All products should be marked approved for

ABS drainage systems.

When winterizing the drains, use only non-toxic recreational vehicle plumbing type antifreeze. These are sold through your dealer and most outlet stores.

G

NOTICE:

In very cold weather winterizing the motorhome is recommending to prevent damage to the waste systems. Use common sense and winterize as needed.

Drain Systems Cleaning

There are many deodorizers on the market in tablet, liquid, and powder form.

These not only combat odor, but also stimulate the bacteria that works to dissolve the solids in your tank. Picking a deodorizer with lubricating qualities will help ease the slide valve operation.

The only cleaning agents that can be used without causing harm to the system are household ammonia and tri-sodium phosphate in small quantities. Do not use any product that contains any portion of petroleum distillates. This attacks the rubber seals of your toilet and dump valves. Also, do not use any dish

G - 17 G - 18

G - 17

NOTES

G - 18

PLUMBINg

G

ELECTRICAL SySTEMS

120-volt POWER ENERGY MANAGEMENT SYSTEM (EMS)

IMPORTANT NOTE: MAKE SURE TO READ, UNDERSTAND, AND FOLLOW

ALL ELECTRICAL COMPONENT OWNER’S MANUALS PROVIDED IN THE

OWNER’S PACKET BEFORE OPERATING THE MOTORHOME. Observe all operating instructions and warnings as well as all recommended maintenance schedules and procedures.

How The System Works

A complete, detailed EMS manual is included with your owner’s packet.

Warning

:

The ENERGY MANAGEMENT SYSTEM is a centralized power switching, fusing, and distribution center. Power from the 120-volt power source is fed into the box. The potential of lethal electrical shock is present in this box. Inadvertent shorts at this box could result in damage and/or injury. All servicing of this box should be done by a qualified Service Technician.

H

When you’re plugged into shoreline power or start your generator, 120-volt current is fed to an Automatic Switch Over Box. Power from the box runs to the

120-volt circuit breakers on the Precision Controls Smart Energy Management

Module. The module and box are explained more in depth later in this chapter and are located under the rear lounge.

PRODUCT DESCRIPTION

Circuit 3A can also be powered by the inverter part of the inverter/charger. See circuit 3A function in the next section for information on which receptacles can work on the inverter.

The ENERGY MANAGEMENT SYSTEM is a completely self-contained 110 volt power distribution and energy management system intended to be used in recreational vehicles. It is housed in a sheet metal enclosure with removable front panel. It provides circuit protection for all the 110 VAC loads in the

RV and a system of energy management to minimize the over-loading and tripping of circuit breakers. Location: under rear lounge.

H - 1 H - 2

H - 1

ELECTRICAL SySTEMS

ENERGY MANAGEMENT

The ENERGY MANAGEMENT SYSTEM controls 110 volt operated circuits to help keep the total 110 volt current draw to less than 30 Amps. These circuits may be any type load, but are typically heavier loads, those whose use can be

“postponed” until a time when current is available for their use.

The 110 volt circuits may be turned “on” by putting their breaker switch up to the on position or “off” by flipping the switch down to the off position. If a circuit is over loaded or an open (short) circuit occurs, a branch breaker will

“kick” out. To reactivate the circuit, try to reset the breaker switch. To reset the tripped GFI breaker, push the handle down slightly to off then lift up to on. If the breaker kicks out again, a qualified electrical service technician should trouble shoot the circuit.

Circuit Protection

Each panel is labeled with the components powered by individual circuits.

Circuit protection for ALL the 110 VAC loads is offered by standard, resetable circuit breakers, provided by Airstream. There are four positions available for circuit breakers. These may be single or dual units. Airstream uses both single and dual breakers as needed according to the options ordered on a unit. One of these breakers (MAIN) is a 30 Amp unit that acts as the Main breaker for the entire system. The 110 volt power is brought into the box from either a shoreline outlet, generator, or the inverter can be used to feed circuit 3A only.

The line side of this cable is fed through the magnetically coupled current transformer to the Main breaker. This breaker back-feeds power into the circuit breaker bus bar to feed power to the branch breakers. All the 120-volt loads in the RV are fed from the branch breakers.

110 Volt Breaker Panel

30 20

15

15 15 15

GFI

The 120-volt Distribution Panel on the front of the EMS contains the main breaker and the branch circuit breakers for your RV.

Main

1B 2A 3A 3B 4A

30 Amp, Main

Circuit 1B. 20 Amp, roof air conditioner

Circuit 2A. 15 Amp , water heater

H

H - 2

ELECTRICAL SySTEMS

H

Circuit 3A. 15 Amp, goes through inverter to entertainment receptacles, and

TV.

Circuit 3B. 15 Amp, microwave.

Circuit 4A. 15 Amp. GFCI, Refrigerator, exterior, and galley receptacles.

ceptacles.

NOTE: There are also two breakers located on the inverter/charger. One breaker protects the charger while it is charging the batteries, the other breaker protects circuit 3A in conjunction with the distribution panel breaker. This breaker for circuit 3A may trip even if the inverter is off.

Main: All 110 voltage flows through this breaker to the other branch circuit breakers. Shutting off this breaker will shut down all 120-volt branch circuits fed through the panel.

NOTICE:

Any time Main or AC breaker is tripped, turn AC off before resetting. Wait two minutes to restart AC.

Circuit 1B. Roof Air Conditioner: Supplies power to roof A/C.

Circuit 2A. Water Heater: 15 amp. - Water heater power supply when used as on 110 VAC.

Circuit 3A. Entertainment and TV receptacles. This circuit runs through

the inverter/charger. Circuit 3A can be supplied power from the inverter if needed and is protected by a GFI circuit breaker located on the Inverter/Charger as well as the breaker on the panel. Check both breakers if any receptacles or appliances on Circuit 3A do not work.

Circuit 3B. Microwave: Microwave power supply.

GROUND FAULT CIRCUIT INTERRUPTER (GFCI)

Most states require trailers with exterior 110 volt receptacles and receptacles close to water sources such as a faucet to have a ground fault circuit interrupter. When properly installed, the GFCI circuit breaker provides reliable overload and short circuit protection PLUS protection from Ground Faults that might result from contact with a “HOT”’ load wire and ground.

IMPORTANT NOTE: The GFCI circuit breaker will NOT reduce shock hazard if contact is made between a “HOT” load wire and a neutral wire or 2 “HOT” load wires.

Circuit 4A. GFI Breaker: Supplies power to the rear, exterior, and galley reEach GFCI circuit breaker is calibrated to trip with a ground current of 5

H - 3 H - 4

H - 3

ELECTRICAL SySTEMS

milliamperes or more. Since most persons can feel as little as 2 milliamperes, a distinct shock may be felt if the need for protection exists. However, the shock should be of such short duration that the effects would be reduced to less than the normally dangerous level. However, persons with acute heart problems or other conditions that can make a person particularly susceptible to electric shock may still be seriously injured.

While the GFCI circuit breaker affords a high degree of protection, there is no substitute for the knowledge that electricity can be dangerous when carelessly handled or used without reasonable caution.

Warning:

The GFCI circuit breaker provides protection only to the circuit to which it is connected. It does NOT provide protection to any other circuit.

GFCI s are proven lifesavers, however, consumers need to take a few minutes each month to do this simple test. By taking action, you can help protect your family from the risk of electric shock.

GFCI Breaker

2012

2013

2014

2015

2016

2017

Perform this test on the GFI Breaker each month and record the date on the chart below.

1. With handle A in “ON” position, press PUSH TO

TEST button B.

2. Handle A should move to TRIP position, indicating that GFCI breaker has opened the circuit.

3. To restore power move handle A to “OFF” and the to “ON

A

B

Push To

Test

JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC

H

H - 4

ELECTRICAL SySTEMS

GFCI Receptacle

Energy Management with Three Hour Averaging

To properly test GFCI receptacles:

Push the “Reset” button located on the GFCI receptacle, first to assure normal GFCI operation.

The current entering the main circuit breaker is routed through a sensor. This sensor measures the current flowing through the main breaker, which is the total amount being drawn by all the 110 volt circuits in the RV. When this current exceeds 30 Amps, the EMS will turn off the controlled loads in an effort to bring the total current to the limit of the incoming service.

H

Plug a night light (with an “ON/OFF” switch) or other product (such as a lamp) into the GFCI receptacle and turn the product “ON.”

Push the “Test” button located on the GFCI receptacle. The night light or other product should go “OFF.”

Push the “Reset” button, again. The light or other product should go “ON” again.

The ENERGY MANAGEMENT SYSTEM limits the average current entering the

Main service breaker over a three hour period to 80% of the 30 Amp service rating. Therefore, if the average current entering the main service breaker over a three hour period exceeds 80% of 30 Amps (24 Amps) the 30A Smart EMS will automatically change the service limit to 80%. Correspondingly, the 30A

Smart EMS will restore the service limit to the full 30 Amp value when the average current drops below 80% of the 30 Amp rating. When the lowered service limits are enabled, the decimal point in the lower right-hand corner of the Load Meter on the Display module will be lit.

If the light or other product remains “ON” when the “Test” button is pushed, the

GFCI is not working properly or has been incorrectly installed (miss wired). If your GFCI is not working properly, call a qualified, certified electrician who can assess the situation, rewire the GFCI if necessary or replace the device.

Record GFCI Breaker and receptacle tests in the chart on H-4.

In addition the ENERGY MANAGEMENT SYSTEM feature is used when the generator is the power source to prevent the generator’s circuit breaker from tripping due to an overload. The Control Module is configured to enable the feature using the configuration dip switches.

H - 5 H - 6

H - 5

ELECTRICAL SySTEMS

Controlled Loads

The system offers control of up to four 110 VAC powered loads. Loads that are controlled are connected to one of the relay circuits of the EMS. There are five total control relays in the EMS. Only four of these can be used in a given application.

Operation

Display Panel

Power Control System

Service

GEN

30A 20A

AC Amps

Precision Circuits Inc SELECT

Status

W/H

A/C

MICRO

In operation, when the 110 VAC and 12 VDC are initially applied, the system will energize the relays at one second intervals, closing the normally open contacts on each of the five relays while monitoring the total current. If the total should exceed the service limit, the system will turn off the last load that was turned on. As it does this, it calculates the amount of current that was removed, which is the value for that load. This value is placed in memory. The system has “learned” the amount of current that particular appliance draws.

This feature compensates for the difference in current draw over a range of line voltage and ambient temperature, by relearning the load each time it is turned off.

The Display Panel is located in the curbside rear roof locker.

Service

The “Select” button allows the service type to be set to either 30 Amps or

20 Amps, to match the incoming service. When power is first applied, the system will always be in the 30 amp mode. The 30A LED will be ON when the system is in the 30 amp mode. Momentarily pressing the button again will switch the system to the 20 amp mode. Momentarily pressing the button again will switch the system back to the 30 amp mode. The system now waits until the total current is lower than the service limit, by the amount in memory, before it will turn that load back on. This assures that there is sufficient current to operate the load.

H

H - 6

ELECTRICAL SySTEMS

Press the “Select” button to switch to 20 amp service, it is necessary to use a 20 amp adapter such as the one pictured or you know the shoreline power is 20 amps.

The 20A LED will light up.

Status

The water heater, roof air conditioner, and microwave are set at the factory to be the controlled circuits and are shed in this order. This means if a power hungry electric grill is plugged into an outlet and the system begins to use more than 30 amps it will begin to shed loads and will shut off the water heater. The generator supplies 25 amp service and is set to switch the system automatically to the 20 amp mode whenever the generator is the power source.

The “GEN” LED will light when the generator is supplying power, the 20A LED will not.

GENERATOR

H

The Display Panel is protected by a 5 amp automotive type fuse located under the EMS 110 volt Distribution Panel cover. Remove the covers four screws to access the fuse.

dangEr:

MAKE SURE TO READ AND UNDERSTAND THE

GENERATOR OWNER’S MANUAL BEFORE OPERATING THE GENERA-

TOR. Observe all operating instructions and warnings as well as all recommended maintenance schedules and procedures.

WARNING

:

Power from the 110 volt power sources is fed into the Distribution Panel box. The potential of lethal electrical shock is present in this box. 110 VAC power from the shoreline and/or generator to the Distribution Panel must be off before removing Distribution Panel cover.

The onboard generator makes your RV house electrical system fully selfcontained. It allows you access to 110 volts when there is no shore power available, but keep in mind that carbon monoxide is deadly! Even though the generator is outside the living area of the motorhome to prevent fumes from entering, Never sleep in the vehicle with the genset running without testing the carbon monoxide detector. Primary protection against inhaling carbon monoxide is daily (every eight hour) inspection for visible and audible genset exhaust system leaks. Know what the symptoms of carbon monoxide poison-

H - 7 H - 8

H - 7

ELECTRICAL SySTEMS

ing are:

Dizziness

Vomiting

Nausea

Muscular twitching

Intense headache

Throbbing in the temples

Weakness and sleepiness

Inability to think coherently

If you or anyone else experience any of these symptoms, get to fresh air immediately. Shut the generator down and do not operate it until it has been inspected by a professional. If the symptoms persist seek medical attention.

dangEr:

Carbon Monoxide is poisonous and can cause confusion, unconsciousness, and death. Follow all instructions, cautions, and warnings in this section and the generator operator’s manual.

1. Never sleep in the vehicle with the genset running without ensuring the carbon monoxide detector is working. Primary protection against inhaling carbon monoxide is daily (every eight hour) inspection for visible and audible genset exhaust system leaks.

2.

3.

4.

5.

6.

7.

8.

9.

DO NOT operate the generator in an enclosed building or in a partly enclosed area such as a garage.

Review the safety precautions for fuel and exhaust fumes in the generator manual.

DO NOT operate the generator when the recreation vehicle is parked in high grass or brush. Heat from the exhaust could cause a fire in dry conditions.

Never operate your chassis or generator engine, or the engine of any vehicle, longer than necessary when the vehicle is parked.

DO NOT simultaneously operate generator and a ventilator which could result in the entry of exhaust gas. When exhaust ventilators are used, we recommend that a window on the opposite side of the unit “upwind” of exhaust gases be opened to provide cross ventilation.

When parked, orient the vehicle so that the wind will carry the exhaust away from the vehicle. DO NOT open nearby windows, ventilators, or doors into the passenger compartment, particularly those which can be

“down wind”, even part of the time.

DO NOT operate the generator when parked in close proximity to vegetation, snow, buildings, vehicles, or any other object could deflect the exhaust under or into the vehicle.

DO NOT touch the generator when running, or immediately after shutting off. Heat from the generator can cause burns. Allow the generator to cool before attempting maintenance or service.

H

H - 8

ELECTRICAL SySTEMS

The generator is located under the motorhome at the rear of the vehicle.

NOTE: Generator is not compatible with E-85 fuel option. Consult your generator owner’s manual or contact Onan for more information.

Generator/City Power

A. To Energy Management System module main breaker

B. From generator

C. From shoreline

120-volt AUTOMATIC SWITCH OVER BOX

H

The switch over box automatically switches the 110 volt feed to the Energy

Management System Module from shoreline to generator and back as you choose which way to power the motorhome. You simply decide whether to plug into a 120-volt shoreline or start the generator and the box will do the rest.

A B

C

If the generator is accidentally started while plugged into shoreline the box will sense the generator incoming power, contact points inside the box will switch cutting the shoreline connection, and establishing the generator connection. This protects the system from a possible overload from dual power sources.

1. When plugged into shoreline power, the current path is from C to A.

2. When you start your generator, the points switch and the power flow is from B to A. Stopping the generator releases the points back to shoreline feed.

3. If you’re plugged into shoreline and you start the generator, the points still switch since the generator has the priority, so the current flow is still B to A.

12-VOLT SYSTEM

IMPORTANT NOTE: MAKE SURE TO READ AND UNDERSTAND ALL ELE-

CRICAL COMPONENT OWNER’S MANUALS PROVIDED IN THE OWNER’S

PACKET BEFORE OPERATING THE MOTORHOME. Observe all operating instructions and warnings as well as all recommended maintenance schedules and procedures.

The major portion of electrical power in your Airstream is 12-volt. The 12-volt current powers just about every thing except for the roof air conditioner, water

H - 9 H - 10

H - 9

ELECTRICAL SySTEMS

heater, 110 volt receptacles, and microwave oven. Even some of these appliances have electronic boards powered by 12 volt.

All 12-volt current is routed to a 12 volt power stud mounted on the chassis frame of the vehicle. The power stud is the hub of the 12 volt system. It ties together the inverter/charger, house battery, and battery separator.

Power from the stud goes to a buss bar with four breaker positions holding two

Type 2 thermal breakers. The thermal breakers feed the rear lounge motor. The second position is left open to add a breaker for an optional solar panel. The breaker buss bar with breakers are located under the roadside rear lounge.

12-Volt Operation

The only thing you have to do is make sure the house battery does not run down.

In normal usage, there isn’t any problem, since you would normally be plugged into a 110 volt shoreline at night or when camping. When you’re plugged into shoreline power or running the generator, with the battery disconnect turned to

“ON” the inverter/charger charges the battery and carries much of the load.

CaUTiOn

:

Thermal breakers break contact when overheated by a short or overload in the wiring. These breakers automatically reset when cooled down. A breaker continually overheating and breaking contact should be investigated by a qualified service technician.

Power is then routed from the battery disconnect switch to the 12-volt distribution panel, located inside the rear center lounge door, and through its branch circuits to the rest of the motorhome.

Some nights you may not find a place to plug into city power. No problem; you can comfortably run your lights, water pump, and vents in a normal fashion without depleting the battery.

If you are not plugged into city power, and you plan on staying longer than a day or two, you’ll want to conserve your battery by using as few lights and appliances as possible. Check the monitor system regularly. If you notice the lights becoming dim, it’s much easier on the battery if you go ahead and start the generator or run the chassis engine before the battery runs down.

Remember the generator starts off the house battery, if the house battery becomes depleted, the chassis engine can be started to charge it. It should only take a few minutes before the generator will start.

H

The engine battery and house battery are isolated from each other by the

Battery Separator as explained earlier, preventing the two systems from draw-

H - 10

ELECTRICAL SySTEMS

ing down simultaneously. They will connect through the Separator if charging from the engine, generator, or inverter/charger is detected.

Battery Disconnect Switch

House Batteries

H

The house batteries (2 AGM, standard) are located on the curbside of the vehicle in the battery storage compartment. All 12-volt current is routed to a

12 volt power stud mounted on the chassis frame of the vehicle. The power stud is the hub of the 12 volt system. It ties together the inverter/charger, house battery, and battery separator.

Off

Switch On

Switch Off

Removable Knob

The manual disconnect switch is located on the roadside of the vehicle on the rear lounge. This switch is used to turn off power from the battery to the 12-volt distribution panel.

CaUTiOn

: When installing a battery always observe polarity.

Battery Storage

Turning off the disconnect switch will cut power to 12 volt systems fed from the

12-volt distribution panel, but will allow the batteries to charge from the engine or inverter/charger.

When storing your Avenue and leaving the house batteries in place, it is recommended that the vehicle be plugged into a 110 volt 30amp shoreline connection for 24 to 48 hours every 30 days. This procedure will properly maintain the battery charge and extend it’s life. DO NOT leave the vehicle continually plugged in and unattended while in storage.

The holding tank heat pads, the lounge motor, and the solar panel are not connected to the 12-volt distribution panel and are wired direct through the thermal breakers mentioned earlier. The battery disconnect will not disable these systems.

The inverter/charger, the generator starter, and the lounge motor power are not supplied through the distribution panel.

H - 11 H - 12

H - 11

ELECTRICAL SySTEMS

The inverter/charger and the generator start are wired direct to the house battery. Although they can be started and ran on this battery feed, the power they supply goes to the 12 volt stud and the battery disconnect switch must be on for power to be supplied from these sources to the distribution panel.

The battery disconnect has a removable knob to prevent inadvertent or accidental use.

Battery Separator

The Battery Separator is located under the lounge accessed by opening the rear cargo doors. It is designed as a solenoid priority system to protect the chassis charging system from excessive loading while allowing house batteries to be charged. The Battery Separator has two basic uses:

Protect The Charging System

To Remove Knob:

1.

2.

Rotate the knob to the off position, The knob is still locked to the switch.

Depress and continue to rotate anti-clockwise until the stop is reached.

The knob can now be removed by pulling it straight out.

To Replace Knob:

Place knob in the switch housing. Depress and turn clockwise 45º to the off position.

The Battery Separator monitors the battery system to determine if the batteries are being charged. The charging can be accomplished through the inverter/ charger or the engine charging system. When the engine battery or house batteries are charging, the Battery Separator will engage, joining the two battery banks. If charging ceases and voltage decreases in either bank the Battery

Separator will disconnect the two banks from each other, protecting the banks from being discharged simultaneously.

H

NOTE: As a safety precaution the electric gas shut-off solenoid closes automatically when 12-volt power is disconnected, cutting gas to appliances. It will reopen when power is restored.

NOTE: In the event the engine battery is depleted, read and follow the instructions in the Chevrolet Owner’s manual.

H - 12

ELECTRICAL SySTEMS

Inverter/Charger Engine Start Assist

Tripp Lite’s RV750ULHW Inverter/Charger is a DC to AC inverter and a battery charger. It has a Remote Control Module mounted in the curbside rear roof locker.

An auxiliary start assist button is located on the dash just below the headlamp switch. If for some reason the chassis battery runs low, pushing and holding this button while turning the ignition key will supply power from the coach batteries to the engine starter. Release the button when the engine starts.

The Inverter/Charger charges the batteries and converts 12 VDC to 110 VAC current for distribution to circuit 3A in the 120-volt distribution panel. Circuit 3A is explained in the 120-Volt Power section earlier.

H

Warning:

AN EXTENSIVE OWNER’S MANUAL FOR THE

INVERTER/CHARGER IS PROVIDED IN THE AIRSTREAM OWNER’S

PACKET. MAKE SURE TO READ, UNDERSTAND, AND FOLLOW ALL

INFORMATION, CAUTIONS, AND WARNINGS IN THE MANUAL BEFORE

OPERATING THE INVERTER/CHARGER.

H - 13 H - 14

H - 13

12-Volt Distribution Panel Diagram

12 Volt Fuse Panel

Cir. # 12 - Spare

Cir. # 11 - Spare

Cir. # 10 - Spare

Cir. # 9 - Black

Cir. # 8 - Gray

Cir. # 7 - Orange

Cir. # 6 - Red

Cir. # 5 - Blue

Cir. # 4 - Brown

Cir. # 3 - Pink

Cir. # 2 - Yellow

Cir. # 1 - Purple

CIRCUIT 1, 15 AMP, PURPLE

BEDROOM LED CEILING LIGHTS

EXTERIOR 12V SOCKET

ROADSIDE REAR READING LIGHT

CIRCUIT 2, 15 AMP, YELLOW

TV CABINET LIGHTS

SHOWER LIGHTS

ROADSIDE MAP LIGHT

CIRCUIT 3, 15 AMP, PINK

TANK MONITOR

EMS CONTROL DISPLAY

FRESH WATER TANK HEATER PAD

WATER PUMP

CIRCUIT 4, 7.5 AMP, BROWN

FURNACE

CIRCUIT 5, 15 AMP, BLUE

FORWARD LED CEILING LIGHTS

GALLEY LIGHTS

SATELLITE ANTENNA PREWIRE

BOOSTER

COURTESY LIGHTS

PATIO LIGHT

CURBSIDE REAR READING LIGHT

CEILING FAN

CIRCUIT 6, 15 AMP. RED

BLACK WATER TANK HEATER PAD

GRAY WATER TANK HEATER PAD

H - 14

ELECTRICAL SySTEMS

CIRCUIT 7, 7.5 AMP, ORANGE

ROADSIDE COMPARTMENT LIGHT

WATER HEATER CONTROL

LP DETECTOR

LP VALVE

CIRCUIT 8, 15 AMP, GRAY

REFRIGERATOR

POWER AWNING

CIRCUIT 9, 20 AMP, BLACK

MACERATOR PUMP

Switch and Component Locations

FORWARD GALLEY PANEL:

Main ceiling lights

Galley lights

Aisle lights

Patio light

H

ELECTRICAL SySTEMS

REAR WARDROBE PANEL:

Bath ceiling lights

SWITCHED INDIVIDUALLY:

Ceiling vent

Reading lights

INSIDE EXTERIOR ROADSIDE COMPARTMENT:

LP Valve Switch and Remote Fill

Macerator pump switch

H

INSIDE CURBSIDE REAR ROOF LOCKER:

Monitor panel display

Water pump switch

Inverter remote switch

Generator remote switch

Energy management system display

Water heater switch/display

Lighted tank heat pad switch

HEAT/AC THERMOSTAT on rear wardrobe wall.

EXTERNAL 12V RECEPTACLE is on the curbside rear exterior wall.

H - 15

POWER AWNING SWITCH is located on the forward end of the galley. The side entry doors must be closed during deployment.

REAR VIEW CAMERA CONTROLS are on the add on rear view mirror/monitor.

The camera turns on automatically when in reverse or can be turned on manually with the switch on the mirror/monitor to view in transit.

Auxiliary Fuse Locations

In addition to the 12-volt fuses and breakers described in the this section, some components have additional protection as supplied or required by their manufacturer.

Locations:

1. Battery Separator: 120 amp breaker next to inverter fuse, under RS of vehicle

2. Battery Separator power line to engine battery: 120 amp breaker under hood next to engine battery.

3. Inverter: 125 amp inline fuse under roadside of vehicle, next to generator.

4. Rear view camera: 1.5 watt inline fuse located in roadside overhead locker.

H - 16

H - 15

Monitor Panel

F

F

2/3

F

2/3 2/3

1/3

1/3

1/3

BLACK

E

GREY

E

FRESH

E

LPG touchsensor

BATTERY VOLTAGE

TANK TEST BATT MAIN

BATT AUX

TouchSensor Technologies, LLC

Phone: 630.221.9000

http://www.touchsensor.com

The monitor display panel shows the fluid levels of the Black, Grey, and

Fresh water tanks, and the Liquid Propane gas tank. Push the Tank Test rocker switch to tank fluid show levels in 1/3 increments.

The panel also shows the voltage status of the Main (engine) and the

Auxiliary (house) battery by using a labeled rocker switch.

The system makes use of a single solid-state sensor per tank. A single sensor is installed on the sidewall of each tank. The sensor is solid state, there are no moving parts to wear or maintain. Because the principle of operation does not

ELECTRICAL SySTEMS

involve any electrical current flow through the tanks contents (conducted or induced), the nature of the fluid in the tank is unimportant.

The fluid tank monitor system has been calibrated at the TouchSensor factory for the size tanks the Avenue uses and should never need another calibration. On the rear of the monitor panel there is an adjustable potentiometer to manually adjust the monitor panel reading of the LPG tank level, this is set at the Airstream factory for the tank on the Avenue motorhome and needs no further adjustment.

H

H - 16

ELECTRICAL SySTEMS

ENTERTAINMENT

Antenna

Manufacturer:

Resource International

2206 Corporate Drive

Boynton Beach, FL 33426

Phone: 561-736-1717

Cleaning Antenna Housing

H

The surface of the antenna is a tough laminated ultraviolet shield. Clean only with mild soap and water. Use no solvents, alcohol, or cleaning fluids.

UHF/VHF RECEPTION

To operate on the amplified antenna press the switch located on the faceplate so the small red light beside the switch comes on. The switch activates the booster for the TV antenna on the roof. To check operation simply tune TV to a channel receiving reception and switch the booster on and off to see if reception improves.

CABLE RECEPTION

To operate on the TV cable system, turn the booster off.

TELEVISION

The user guide for the television installed in your motorhome is included with your Airstream Avenue Owner’s Packet. Television is mounted on a tilt/swivel base to provide multiple viewing angles.

H - 17 H - 18

H - 17

Solar Panel Pre-Wire

The Avenue Motorhome is pre-wired for the addition of a solar panel of your choice.

Locations for solar panel pre-wire:

* A green and a yellow wire are located forward of the fan. These wires are fed up through the roof and connect to the solar panel.

* The green wire is run to the ground buss bar on the 12-volt distribution panel.

* The yellow wire is coiled beside the four position breaker buss bar located under the curbside rear lounge. One position is left open to add a Type 2 thermal breaker for the solar panel protection. Refer to the panel installation manual for instructions.

ELECTRICAL SySTEMS

H

H - 18

APPLIANCES

AIR CONDITIONER

Warning

: Most LP gas appliances used in recreational vehicles are vented to the outside of the vehicle. Check the exterior areas of your unit for clearance in these areas. Turn all gas operated appliances off when parked close to a gasoline pump. It is possible that gasoline fumes could enter these types of appliances and ignite from the burner flame or automatic igniters, CAUSING A FIRE OR AN EXPLOSION.

Manufacturer:

Coleman - RV Products

P.O. Box 4020

Wichita, KS 67204

Email: [email protected]

I

If any appliance manuals have not been provided with your motorhome, contact your dealer, the respective appliance manufacturer or Airstream Customer

Service. A manual will be provided to you.

Note: Review the air conditioning literature supplied in your Owner’s Packet before proceeding,

Maintenance: Follow the instructions and warnings noted in the appliances and equipment owner’s manuals as well as the ones listed below:

The roof air conditioner used on the motorhome is one of the most powerful in the RV industry. In your Owner’s Packet is a set of literature covering all operating and maintenance instructions. If the literature is misplaced please contact the air conditioner manufacturer or your Airstream dealer for replacement.

Annual maintenance should be conducted on propane gas appliances and equipment by an authorized dealer or repair facility.

Insects can build nests in the burners of various appliances and equipment. The burner and burner orifice of the propane gas appliances and equipment should be cleaned out by an authorized dealer or repair facility anytime circumstances or conditions warrant, but no less than on an annual basis.

The voltage to the air conditioner is critical. We commonly refer to 110 or

120 volts, but a check with a voltmeter may find voltage much lower. Your air conditioner will probably not function if the current drops below 105 volts.

Low voltage is usually associated with older or poorly maintained trailer parks, but many people have found their homes, built only twenty or thirty years ago, may not be capable of operating the air conditioner on some receptacles,

I - 1 I - 2

I - 1

APPLIANCES

also offers a detailed service guide for your furnace. Parking your motorhome so the power cord can be plugged into a receptacle close to the fuse or circuit breaker box can alleviate the problem. Avoid extension cords and adapters whenever possible. If an extension cord must be used it should be as short and heavy as possible to provide the most current to the air conditioner.

Warning

: Carefully read all the manufacturer’s instructions prior to operating. NEVER store flammable material next to the furnace or around its exhaust vent on the side of the motorhome. Before starting the furnace, check and clear all obstructions from exterior vent area.

If high temperatures are expected, make an effort to park in a shaded area.

Starting the air conditioner early in the morning also helps. It is much easier to hold a comfortable temperature than it is to lower the temperature after the interior of the motorhome is already hot.

If warranty service is required use only a service location recommended by the furnace manufacturer or a qualified Airstream dealer.

FURNACE REFRIGERATOR

Manufacturer:

Suburban Manufacturing

Phone: 423-775-2131

Email: [email protected]

The manufacturer of the furnace in your motorhome has been well known in the RV industry for many years. The furnace burns LP gas, and is powered by 12-volt current from the battery. Operating instructions are located in your

Owners Packet. If they should become misplaced, new literature can be ordered direct from the manufacturer or your Airstream dealer. The manufacturer

Novakool, 3.1 Cu. Ft.

Model R31000AC/DC

Manufacturer:

Nova Kool Manufacturing Inc.

1578 Hartley Avenue

Coquitlam, BC

Canada V3K 7A1

Novakool service department can be reached at 604-523-6515 ext. 104, or at [email protected] from 7:00 am to 5:00 pm PST.

I

I - 2

APPLIANCES

Review all refrigerator Literature supplied in your Owner’s Packet or stored in the refrigerator prior to operating.

Start-up:

OPERATION

The refrigerator requires 12-volt or 120-volt current to operate. It is equipped to automatically switch between the sources as needed with 120-volt taking priority when both sources are available.

Turn the power on and set the thermostat between 3 and 4. You can make further adjustments to suit your personal requirements after the box has cooled down. Allow the refrigerator to come down to temperature before loading with product. Setting the thermostat to a higher setting i.e. 7, will not decrease the time required for the unit to cool down to its normal operating temperature. The unit will cool at the same rate on DC as on AC.

I

All Nova Kool units are supplied with a wide range thermostat that is designed to sense the evaporator (cold plate) temperature. The coldest position on the thermostat is reached by turning the knob to the right (clockwise); conversely turning the thermostat knob to the left (counterclockwise) yields a warmer setting. The OFF position is reached by turning hard counterclockwise past the click. The reference

Thermostat

Set Point

2

3

1

COLDER

4

5

1 Warmest

7 Coldest

7 point is shown with an indicator sticker beside the knob.

Defrost & Cleaning:

The frequency of defrost is dependant on the number of door openings, the ambient temperature and the humidity level. Typically, it is a good practice to defrost once there is ¼” of frost buildup on either side of the evaporator (cold plate). When defrosting, the unit is shut off at either the breaker panel or by turning the thermostat counterclockwise to the OFF (0) position. Prop the door open. We suggest placing a towel in the bottom of the refrigerator to catch excess moisture. Speeding up the process with a knife or scraper is strongly discouraged due to the likelihood of rupturing the refrigerant circuit; in the event this happens call NovaCool Service at 604-523-6515 ext.104.

Now that the unit has been defrosted, the interior can be cleaned with a nonabrasive cleaner. Do not use “brillo” or “SOS” type abrasive pads, as they will

I - 3 I - 4

I - 3

APPLIANCES

score the surfaces. Baking soda is recommended.

COOK TOP

Smev Series 8022

Warning

: The cook top operates on liquid propane gas and is designed to cook foods only. Any other use is considered incorrect and dangerous. Airstream Inc. and SMEV are not responsible for any personal injury or property damage due to improper, incorrect, or irresponsible use.

People using a gas cook top in their home will find little difference in the operation of the cook top in a recreation vehicle. Other customers, used to electric ranges may be a little apprehensive at first; but will quickly gain confidence.

The basic operation of the gas cook tops have been the same for many years, but please be sure to read all the directions furnished by the manufacturer and located in the Owner’s Packet. Excellent service and parts manuals are also available from the manufacturer.

IMPORTANT: This appliance must only be used by responsible adult people.

During and immediately after use accessible parts may be hot; do not touch them and keep children away. Once cooking is completed, ensure that all gas control knobs are turned to the closed position. After use turn off the gas at the main supply. Caution: glass lids may shatter when heated. Turn all the burners off before closing the lid. Cooking facilities must not be used to heat the environment. Keep combustible materials away from the appliance. Use protective gloves when handling hot elements. Never lay Pyrex lids or other items on the burners.

I

Warning

: The operation manual for the cook top contains specialized information, warnings, and cautions that, if not followed exactly, may result in a fire or explosion causing property damage, personal injury, or death. The manual should be reviewed prior to operating the appliance. If this manual has not been provided with your motorhome, contact your dealer or Airstream Customer Service to obtain it.

USE THE APPLIANCE ONLY IN A WELL VENTILATED SPACE. The use of a gas cooking appliance results in the production of heat and moisture in the motorhome. Use the ceiling vents to ensure that the motorhome is well ventilated.

I - 4

APPLIANCES

Choose the burner suitable for the pan dimensions making sure the burner flame does not extend beyond the pan base (Fig. 2). Place the pan centrally on the burner so that it is stable on the pan support.

Figure 2

IMPORTANT: IF THE BURNER DOES NOT IGNITE IMMEDIATELY, TURN THE

KNOB TO “MINIMUM RATE” POSITION AND REPEAT THE OPERATION.

If ignition is still not possible have the appliance checked to ensure that there is gas and/or electrical supply. If the unit still fails to ignite, turn the gas off at the main supply and contact your dealer.

I

IMPORTANT: NO PANS OR OTHERS OBJECTS MUST BE OVER THE

BURNERS DURING IGNITION OPERATION.

CLEANING INSTRUCTIONS. Turn off the appliance and allow to cool before cleaning. Cold water or a damp cloth may damage hot surfaces. Do not use abrasive, corrosive, chloride-based products or steel pads. Do not leave acidic or alkaline substances e.g. vinegar, salt, lemon juice etc. on the appliance surfaces. Stainless steel surfaces and enamelled parts should only be washed with soapy water or neutral detergent, rinsed and dried. Only use clean sponges or cloths.

AUTOMATIC HOTPLATE IGNITION:

a) Push control knob in slightly, turn to ignition position (Large flame symbol).

Ignite the burner by pressing the ignition button, keep the control knob pressed in for 3-5 seconds. b) Release knob and turn to the required heat setting (large or small flame symbol). The flames internal tongue should be blue and the outline well defined.

Warning

: Do not cook while under way. Hot food or liquid could scald due to a sudden stop or accident.

I - 5 I - 6

I - 5

APPLIANCES

MICROWAVE OVEN

Manufacturer:

Contoure

Tel: 1.888.551.1041

www.contoure..com

WATER HEATER

Manufacturer:

Suburban Manufacturing

Phone: 423-775-2131

Email: [email protected]

Please be sure to read all the directions furnished by the manufacturer and located in the Owner’s Packet. Only federally certified technicians are permitted to service microwave ovens. If you have a microwave problem please contact your dealer or Airstream Customer Relations department.

Note: Review the water heater literature supplied in your Owner’s Packet before proceeding to use the water heater, It contains important operational, maintenance, and safety information.

Warning

: Do not cook while under way. Hot food or liquid could scald due to a sudden stop or accident.

Warning

: Hydrogen gas can be produced in a hot water system served by this heater that has not been used for a long period of time

(generally two weeks or more). Hydrogen gas is extremely flammable. To reduce the risk of injury under these conditions, it is recommended that the hot water faucet be opened for several minutes at the kitchen sink before using any electrical appliance connected to the hot water system.

If hydrogen is present, there will probably be an unusual sound such as air escaping through the pipe as the water begins to flow. There should be no smoking or open flame near the faucet at the time it is open.

I

I - 6

APPLIANCES

Water Heater Draining

All models have a drain plug or pet cock on the water heater. Access is from the exterior. The plug or valve is usually located in the lower left corner, viewed as you face the exterior of the water heater.

SAFETY

I

If your water system is full and cold and the water heater is ignited, the system can produce pressures as high as 120 psi before the relief valve starts to open.

Since the water system normally operates in the 40-psi range the water expansion does put unusual stress on the system. This normally does not cause any problems, but the stress is easily alleviated. As the water is heating just open any faucet and run as little as a cup of water. Just removing this small amount of water reduces the pressure build up significantly.

For fun, watch the sequence of events your family goes through when you park the motorhome and ignite the water heater. More than likely, someone will run water and relieve the pressure without even realizing it.

I - 7 I - 8

I - 7

NOTES:

I - 8

APPLIANCES

I

SPECIFICATIONS

J

NOTE: The weights and measurements in this manual are derived from the best information available at time of this manuals publishing. Please refer to the Cargo Carrying Capacity tag placed on the inside of the door and your Chevrolet Owner’s Manual for weights specific to your RV.

DIMENSIONS

Exterior Height with Antenna (Estimated)

Interior Head Room

Interior Floor Width at Floor

Exterior Length

Exterior Width

109”

72”

72”

20’ 4”

79.4”

GAWR-REAR (lbs.)

SCWR (lbs.) - Sleeping Capacity

Seating Capacity (Traveling)

NCC (lbs.)

UBW (lbs.)

Wheel Torque Specification: Aluminum Wheels:

Towing Weight Capacity Hitch/Towing (lbs.)

Towing Weight Capacity Hitch/Towing (lbs.) With Distribution Bars

Abbreviations are defined on the next page.

6,084

2 (300 lbs.)

7

1525

8075

140 Lbf/Ft.

400/4000

1000/10000

CAPACITIES/WEIGHT RATINGS

LP Tank @ 78% Full

Fresh Water Tank

Grey Tank

Black Tank

Fuel Tank, Gas

GVWR (lbs.)

GCWR (lbs.)

TWR, Maximum (lbs.)

GTW (lbs.)

GAWR-FRONT (lbs.)

7.92 gal.

28 gal.

21 gal.

10 gal.

31 gal.

9600

16,000

400

4,000

4,300

Warning

: The towing vehicle’s braking system is rated for operation at GVWR (GROSS VEHICLE WEIGHT RATING), NOT at the

GCWR (GROSS COMBINED WEIGHT RATING). A separate functioning brake system is required for any towed vehicles or trailers weighing more than 1000 lbs. (450 kg) when fully loaded. NEVER exceed the

GVWR (GROSS VEHICLE WEIGHT RATING), or the GAWR (GROSS AXLE

WEIGHT RATING) specified on a motorhome certification label.

Warning

: Do not exceed the Gross Axle Weight Ratings, the

Gross Vehicle Weight Rating , or the Gross Combined Weight Rating when loading your vehicle and/or towing a trailer. Failure to heed any part of this warning could result in loss of control of the motorhome and towed

J - 1 J - 2

J - 1

SPECIFICATIONS vehicle or trailer and may cause an accident and serious injury.

Warning

: READ AND FOLLOW ALL WARNINGS IN THE FUEL

SECTION OF YOUR CHEVROLET’S OPERATOR’S MANUAL BEFORE

FUELING YOUR VEHICLE.

Warning

: NEVER exceed the weight ratings of the trailer hitch installed on a motorhome. Failure to heed any part of this warning could result in loss of control of the motorhome and towed vehicle or trailer and may cause an accident, serious and/or fatal injury. For specified towed vehicle braking requirements, consult the Chevrolet owner’s manual.

Abbreviation Definations

Gross Vehicle Weight Rating ( GVWR) is the maximum permissible weight of the motorhome.

Gross Combination Weight Rating ( GCWR) means the maximum allowable loaded weight of this motorhome and any towed trailer or towed vehicle.

Tongue Weight Rating (TWR) is the maximum permissible weight of the trailer tongue on the hitch.

Gross Trailer Weight (GTW) is a maximum permissible trailer weight to be towed.

Gross Axle Weight Rating ( GAWR): is the value specified as the load carrying capacity of a single axle system, as measured at the tireground interfaces

Sleeping Capacity Weight Rating (

SCWR) is the manufacturer’s designated number of sleeping positions multiplied by 150 pounds

(70 kilograms).

• Seating Capacity

(Traveling); is the maximum number and maximum total weight of passengers allowed to ride in the vehicle while in transit as determined by the availability of seat belts and weight.

Net Carrying Capacity (NCC) is equal to GVWR minus UBW.

Unit Base Weight (

UBW) is the dry weight of the base unit with full fuel and w/o options or fluids.

NOTE: The Unit Base Weight (UBW) and the Net Carrying Capacity (NCC) is not the same as the Unloaded Vehicle Weight (UVW) and the Cargo Carrying

Capacity (CCC) shown on the Motorhome Weight Information tag in your vehicle. The UBW and NCC weights are for the base unit with no options and fluids except for fuel on motorhomes.

J

The UVW and CCC on the Cargo Carrying Capacity tag are weights for the individual vehicle as built with its options and certain water capacities.

J - 2

INDEx

Air Conditioner .................................................... I-1

Alignment , .........................................................

C-3

Antenna ........................................................... H-17

Appliances ........................................................... I-1

Awning ................................................................E-6

Battery Box ..................................................... H-11

Battery Disconnect .......................................... H-11

Black tank Flush .............................................. G-13

Body kit ..............................................................E-3

Breaker Panel, 120-volt ..................................... H-2

Bulbs, Interior .....................................................F-5

Cab Seats ...................................................C-2, F-1

Cabinets .............................................................F-3

Camping ............................................................ D-1

Capacities ........................................................... J-1

Carbon Monoxide .............................................. D-3

Chassis, Chevrolet Van............................... C-1, J-1

Circuit Breakers ....................................... H-2, H-14

City Water Hook-Up .......................................... G-7

Cleaning, Aluminum Skin ...................................F-4

Component Identification .................................. C-2

Condensation .................................................. D-17

Cook Top ............................................................. I-4

Counter Areas ....................................................F-4

Curtain, Front Privacy .........................................F-5

Dimensions ......................................................... J-1

Drain/Shutoff Valves ................................ G-8, G-14

Draperies.............................................................F-6

Driving ................................................................B-1

Electrical System ............................................... H-1

Entertainment System ..................................... H-17

Extended Stay ................................................. D-16

Exterior ...............................................................E-1

Exterior Shower ................................................. G-8

Fabrics, Cleaning ................................................F-4

Fire Safety ......................................................... D-3

Flooring ..............................................................F-3

Furnace ............................................................... I-2

Fuses ............................................................... H-15

Gas, LP .............................................................. G-1

Generator .......................................................... H-7

Ground Fault Interrupter .................................... H-3

GVWR .................................................. B-1, J-1, J-2

GCWR .........................................................J-1, J-2

Hitch Load ..........................................................B-6

Holding Tanks .................................................. G-14

Humidity .......................................................... D-17

Interior.................................................................. F-1

Jack .....................................................................C-9

Leveling ................................................. C-12, D-16

Lights, Interior ..........................................F-5, H-14

Loading........................................................B-1, B-6

Lounge/Bed ........................................................F-2

LP Gas Detector .............................................. D-14

LPG System ...................................................... G-1

Maintenance Schedule .......................................A-9

Macerator Pump .............................................. G-14

Microwave Ovens ................................................ I-6

INDEx

Mold ................................................................ D-19

Monitor Panel .................................................. H-16

Switch Over Box ............................................... .H-9 Ventilation ........................................................ D-17

Overloading ................................................B-1, B-6

Overnight Stop ................................................ D-15

Plumbing ........................................................... G-1

Refrigerator .......................................................... I-2

Roof Vent ..................................................E-5, D-16

Safety Defects, Reporting ..................................A-8

Safety ........................................ B-4, B-13, D-3, G2

Sanitizing, Fresh Water Tank ............................. G-7

Seats ..................................................................F-1

Seat Belts ...........................................................B-4

Service ................................................................A-7

Shower/Wet Bath........................................F-3, G-8

Sink............................................................... ......F-3

Smoke/CO Alarm .............................................. D-2

Solar Panel Pre-Wire ....................................... H-18

Specifications ..................................................... J-1

Storage ............................................................ G-11

Table, Pedestal....................................................F-2

Tank Capacities .................................................. J-1

Tank Drain, Fresh Water .................................... G-8

Tank, Holding........................G-8, G-11, G-14, G-16

Tank, Water ........................................................ G-4

Tank, LPG .......................................................... G-1

Tires ................................................................... C-3

Air Pressure ................................................ C-3

Alignment .................................................... C-3

Changing .................................................... C-7

Inflation ....................................................... C-4

Overloading ................................................ C-5

Torque ............................................... C-6, C-11

Rotation .................................................... C-12

Support ..................................................... C-12

Toilet .................................................................. G-9

Towing A Trailer ..........................................B-5, B-8

Towing Your Motorhome ..................................B-13

TV Antenna ...................................................... H-17

Vent, Power ........................................................E-5

Washing/Waxing .................................................E-1

Warranty .............................................................A-1

Water Heater ....................................................... I-6

Water Heater By Pass ..................................... G-12

Water Hookup ................................................... G-7

Water Pump & Strainer ...................................... G-6

Water System .................................................... G-4

Water Valves ............................................ G-8, G-11

Weighing .............................................................B-2

Weight Distribution .............................................B-4

Wheels ............................................................. C-11

Wheel Simulator .............................................. C-10

Wet Bath .............................................................F-3

Winterizing ....................................................... G-11

Winter Traveling ............................................... D-20

Airstream Avenue Owner’s Manual

© Airstream, Inc. 2012

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement