AD SERIES
AD SERIES
extreme lightweight
digital amlifier
www.trevisaudio.com
TA-AD1004
extremely lightweight
digital amlifier
PRODUCT FEATURES
PRODUCT SPECIFICATIONS
Power Rating (EIAJ 1kHz)
2 x 500W @ 4 Ohms, 2 x 260W @ 8 Ohms
CH A & CH B Bridged: 1 x 1000W @ 8 Ohms, 1 x 520W @ 16 Ohms
S/N Ratio
> 105 dBA
Distortion
< 0.5 % , typically < 0.1 % (THD, DIM, SMPTE)
Amplifier Gain
32 dB (40 x)
Damping Factor
> 500 @ 8 Ohms / 500Hz
Bandwidth
10 Hz - 30 kHz
Slew Rate (8 Ohms)
50V / uS
Power Requirements
EU models AC 230V±10% / 50-60Hz, others AC 115V±10% / 50-60Hz
PRODUCT FEATURES
Audio Inputs
1 electronically balanced Input for each channel
Two XLR-3F connectors (Pin1 GND Pin2 + Pin3 -)
Audio Outputs
Unbalanced to ground, 1 NL4MP Speakon connector for each channel
CHA & CHB output 1+ 1-, bridged output 2+ 2- on both connectors
Input Impedance
10 kOhms balanced to ground
LED Indicators
5 segment LED meter with clip and protect indicators for each channel,
and over temperature protection LED
Amplifier Topology
Digital amplifier with Switch Mode Power Supply
Protections
Thermal Protection (Over temp. power limiting, Thermal Shutdown)
Short circuit/Output overload protection, Clip limiter and permanent
signal limiter, High Frequency protection, Temperature controlled fan
Height x Width x Depth
89mm (2U) x 243mm (9.5”) x 335mm (13.2”)
Weight
3.80 kg
uAmazing drive-power for
the TP-F series loudspeakers
at the fraction of the weight of
a conventional power amp
uSophisticated protection
circuits ensure reliable
operation under all
circumstances. Precise fully
protected circuit design
including DC, infrasonic, high
frequency, overload and short
circuit
uVariable speed temperature
controlled cooling fan for low
operating noise
uComprehensive front panel
indicators including level, clip,
protection and thermal
forecast
uFixed frequency
switchmode output stage for
high grade sonic accuracy
uSmall size and weight
combined with very high
efficiency makes it ideal for
mobile or touring applications,
and for a wide range of
permanent installations
AD SERIES AMPLIFIERS
APPLICATIONS
uTouring, installed PA for
clubs, A/V,theater, broadcast,
etc.
uHigh quality stage
monitoring for clubs, A/V,
theater, broadcast, etc.
uModular amplifier for large
installations (multichannel
movies, event halls,
conference rooms, stadiums
etc.)
www.trevisaudio.com
TA-AD1504
extremely lightweight
digital amlifier
PRODUCT FEATURES
PRODUCT SPECIFICATIONS
Power Rating (EIAJ 1kHz)
2 x 750W @ 4 Ohms, 2 x 370W @ 8 Ohms
CH A & CH B Bridged: 1 x 1500W @ 8 Ohms, 1 x 740W @ 16 Ohms
S/N Ratio
> 105 dBA
Distortion
< 0.5 % , typically < 0.1 % (THD, DIM, SMPTE)
Amplifier Gain
32 dB (40 x)
Damping Factor
> 500 @ 8 Ohms / 500Hz
Bandwidth
10 Hz - 30 kHz
Slew Rate (8 Ohms)
50V / uS
Power Requirements
EU models AC 230V±10% / 50-60Hz, others AC 115V±10% / 50-60Hz
PRODUCT FEATURES
Audio Inputs
1 electronically balanced Input for each channel
Two XLR-3F connectors (Pin1 GND Pin2 + Pin3 -)
Audio Outputs
Unbalanced to ground, 1 NL4MP Speakon connector for each channel
CHA & CHB output 1+ 1-, bridged output 2+ 2- on both connectors
Input Impedance
10 kOhms balanced to ground
LED Indicators
5 segment LED meter with clip and protect indicators for each channel,
and over temperature protection LED
Amplifier Topology
Digital amplifier with Switch Mode Power Supply
Protections
Thermal Protection (Over temp. power limiting, Thermal Shutdown)
Short circuit/Output overload protection, Clip limiter and permanent
signal limiter, High Frequency protection, Temperature controlled fan
Height x Width x Depth
89mm (2U) x 243mm (9.5”) x 335mm (13.2”)
Weight
3.80 kg
uAmazing drive-power for
the TP-F series loudspeakers
at the fraction of the weight of
a conventional power amp
uSophisticated protection
circuits ensure reliable
operation under all
circumstances. Precise fully
protected circuit design
including DC, infrasonic, high
frequency, overload and short
circuit
uVariable speed temperature
controlled cooling fan for low
operating noise
uComprehensive front panel
indicators including level, clip,
protection and thermal
forecast
uFixed frequency
switchmode output stage for
high grade sonic accuracy
uSmall size and weight
combined with very high
efficiency makes it ideal for
mobile or touring applications,
and for a wide range of
permanent installations
AD SERIES AMPLIFIERS
APPLICATIONS
uTouring, installed PA for
clubs, A/V,theater, broadcast,
etc.
uHigh quality stage
monitoring for clubs, A/V,
theater, broadcast, etc.
uModular amplifier for large
installations (multichannel
movies, event halls,
conference rooms, stadiums
etc.)
www.trevisaudio.com
TA-AD2008
extremely lightweight
digital amlifier
PRODUCT FEATURES
PRODUCT SPECIFICATIONS
Power Rating (EIAJ 1kHz)
2 x 1050W @ 8 Ohms, 2 x 570W @ 16 Ohms
CH A & CH B Bridged: 1 x 2100W @ 16 Ohms, 1 x 1140W @ 32 Ohms
S/N Ratio
> 105 dBA
Distortion
< 0.5 % , typically < 0.1 % (THD, DIM, SMPTE)
Amplifier Gain
38 dB (80 x)
Damping Factor
> 200 @ 8 Ohms / 500Hz
Bandwidth
10 Hz - 30 kHz
Slew Rate (8 Ohms)
50V / uS
Power Requirements
EU models AC 230V±10% / 50-60Hz, others AC 115V±10% / 50-60Hz
PRODUCT FEATURES
Audio Inputs
1 electronically balanced Input for each channel
Two XLR-3F connectors (Pin1 GND Pin2 + Pin3 -)
Audio Outputs
Unbalanced to ground, 1 NL4MP Speakon connector for each channel
CHA & CHB output 1+ 1-, bridged output 2+ 2- on both connectors
Input Impedance
10 kOhms balanced to ground
LED Indicators
5 segment LED meter with clip and protect indicators for each channel,
and over temperature protection LED
Amplifier Topology
Digital amplifier with Switch Mode Power Supply
Protections
Thermal Protection (Over temp. power limiting, Thermal Shutdown)
Short circuit/Output overload protection, Clip limiter and permanent
signal limiter, High Frequency protection, Temperature controlled fan
Height x Width x Depth
89mm (2U) x 243mm (9.5”) x 335mm (13.2”)
Weight
3.80 kg
uAmazing drive-power for
the TP-F series loudspeakers
at the fraction of the weight of
a conventional power amp
uSophisticated protection
circuits ensure reliable
operation under all
circumstances. Precise fully
protected circuit design
including DC, infrasonic, high
frequency, overload and short
circuit
uVariable speed temperature
controlled cooling fan for low
operating noise
uComprehensive front panel
indicators including level, clip,
protection and thermal
forecast
uFixed frequency
switchmode output stage for
high grade sonic accuracy
uSmall size and weight
combined with very high
efficiency makes it ideal for
mobile or touring applications,
and for a wide range of
permanent installations
AD SERIES AMPLIFIERS
APPLICATIONS
uTouring, installed PA for
clubs, A/V,theater, broadcast,
etc.
uHigh quality stage
monitoring for clubs, A/V,
theater, broadcast, etc.
uModular amplifier for large
installations (multichannel
movies, event halls,
conference rooms, stadiums
etc.)
www.trevisaudio.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising