Type H Line Array Speaker System

Type H Line Array Speaker System
Type H
Line Array Speaker System
VP-1061/1121
VP-1241/1361
Without Front Grille
SR-H2L
SR-H2S
SR-H3L
SR-H3S
DESCRIPTION
Type H line array speaker systems provide clear sound with directional focus on the listening area and a low degree of attenuation
over distance, making them ideal for mainly vocal applications in medium-sized installations, even with highly reflective interior
surfaces. Four Type H models are available, in close-proximity vertically arrayed short (9-speaker) or long (taller, 16-speaker) lengths,
and linear or curved versions that create a uniform sound pressure coverage area. The linear versions emphasize extended
transmission distance, while the curved models supply a 20-degree vertical directional angle, for shorter coverage distances. All
models are energy-efficient and cost-effective, featuring slim, 84 mm (3.3”)-wide enclosures with high-quality 7 cm (2.8”) full-range
speaker units, making them ideal for a wide range of interior installations.
FEATURES
• Clear sound over distance
The reflection-free and feedback-resistant speaker system’s line array configuration works together with Sync-Drive (Synchronous
Nexus Control) technology to keep the audio in phase with its sources, for a linear sound source.
• Enhanced audio dispersion and directivity
Speaker design provides optimally precise vertical directivity focus, while front grille structure provides wider horizontal dispersion.
Curved speaker models employ a hyper-clothoid concept array with enhanced vertical audio dispersion.
• Space/Energy Efficient Design
The speaker system’s line array configuration ensures higher output levels with less input power, and space-saving, cost-effective
design features mean fully effective operation is possible without additional amplification equipment.
• Customized Application Versatility
Selection among four models ensures greater listening area customization. Up to two linear units can be connected for expanding
the vertical coverage area. The slim and attractive design means that speakers can properly match the interior décor of the venue.
• Easy and Appropriate Installation
Thanks to optionally available mounting brackets, speakers may be easily placed in the most suitable location for their intended use,
such as flat against a wall, on a wall at some horizontal and vertical angles, suspended from a ceiling, and mounted on a speaker
stand. Removable input terminal connectors ensure easy and smooth hook-ups.
TOA Corporation SR-H Series 1/7
OPTIONS
SR-EP3
SR-WB3
SR-TB3
SR-FB3
SR-SA3
MT-S0301
Extension Plate
Wall Mounting Bracket
Wall Tilt Bracket
Flying Bracket
Stand Adapter
Matching Transformer
SR-WB3
Extension
Plate
SR-FB3
SR-TB3
Wall Mounting
Bracket
SR-EP3
Flying
Bracket
Wall Tilt
Bracket
SR-SA3
Stand
Adapter
SPECIFICATIONS
SR-H2L
Model No.
SR-H2S
SR-H3L
Enclosure
SR-H3S
Bass-reflex type
Power Handling Capacity
Continuous program: 180W
Continuous program: 360W
Rated Impedance
8Ω
Sensitivity
92dB
(1W, 1m equivalent, measured at 4m)
90dB
(1W, 1m equivalent, measured at 4m)
Frequency Response
80 – 18,000Hz (-10dB)
90 – 17,000Hz (-10dB)
(when equalized at recommended parameters) (when equalized at recommended parameters)
110 – 18,000Hz (-10dB)
90 – 17,000Hz (-10dB)
(when equalized at recommended parameters) (when equalized at recommended parameters)
Directivity Angle
Horizontal: 90°
Vertical: 0°
(within the range of speaker height)
Horizontal: 90°
Vertical: 0°
(within the range of speaker height)
Horizontal: 90°
Vertical: 20°
7cm (2.8") cone-type × 9
Speaker Component
Input Connector
Finish
95dB
(1W, 1m equivalent, measured at 8m)
92dB
(1W, 1m equivalent, measured at 8m)
Horizontal: 90°
Vertical: 20°
7cm (2.8") cone-type × 16
Removable input connector
Enclosure:
Front grille:
MDF, white, urethane paint
Punched steel plate, white, acrylic paint
Dimensions
84 (W) × 668.4 (H) × 115 (D)mm
(3.31" x 26.31" x 4.53")
84 (W) × 663.4 (H) × 115 (D)mm
(3.31" x 26.12" x 4.53")
84 (W) × 1186.4 (H) × 115 (D)mm
(3.31" x 46.71" x 4.53")
84 (W) × 1177.2 (H) × 157 (D)mm
(3.31" x 46.35" x 6.18")
Weight
4.4kg (9.7 lb)
4.2kg (9.26 lb)
7.6kg (16.75 lb)
7.9kg (17.42 lb)
Options
Extension plate: SR-EP3, Wall mounting bracket: SR-WB3, Wall tilt bracket: SR-TB3, Flying bracket: SR-FB3, Speaker stand adapter: SR-SA3,
Matching transformer: MT-S0301, Digital processor: DP-0206
RECOMMENDED OPTIONAL SUBWOOFERS
FB-100
TOA Corporation SR-H Series 2/7
FB-120B
FB-120W
CHARACTERISTIC DIAGRAMS (SR-H2L)
Polar Response
60°
vertical
horizontal
0°
10
0°
10
330°
30°
330°
30°
0
0
-10
-10
60°
300°
-20
300°
-20
-30
-30
-40
-40
270°
90°
90°
-40
-30
-30
240°
-20
120°
-20
120°
240°
-10
0
0
0
0
150°
210°
210°
10
180°
500Hz
400Hz
315Hz
150°
330°
330°
0
-10
60°
300°
-20
300°
-20
60°
-30
-40
-40
-30
90°
-40
-40
-30
-30
-20
120°
240°
270°
270°
90°
-30
240°
-20
120°
-20
120°
240°
-10
-10
-10
-10
0
0
0
0
150°
150°
210°
10
180°
210°
10
180°
2000Hz
1600Hz
1250Hz
0°
10
150°
330°
330°
0
-10
60°
300°
-20
300°
-20
-30
60°
-40
-40
270°
-40
-40
-30
-20
120°
270°
90°
-30
240°
-40
Vertical
-40
-30
240°
-30
-20
120°
240°
-20
120°
-10
-10
-10
-10
0
0
0
0
150°
150°
210°
10
180°
210°
10
180°
8000Hz
6300Hz
5000Hz
150°
16000Hz
12500Hz
10000Hz
300°
-20
-30
90°
-40
60°
300°
-40
270°
90°
-20
0
-10
-30
270°
90°
4000Hz
3150Hz
2500Hz
330°
30°
0
-10
-20
-30
210°
0°
10
330°
30°
240°
10
180°
2000Hz
1600Hz
1250Hz
0°
10
30°
0
-10
150°
210°
10
180°
4000Hz
3150Hz
2500Hz
0°
10
30°
300°
-20
-40
90°
-40
60°
300°
270°
270°
-20
0
-10
-30
-40
-40
90°
1000Hz
800Hz
630Hz
330°
30°
0
-10
-20
-30
-30
210°
0°
10
330°
30°
240°
10
180°
500Hz
400Hz
315Hz
0°
10
30°
0
-10
150°
210°
10
180°
1000Hz
800Hz
630Hz
0°
10
30°
120°
270°
270°
-10
0°
10
60°
-40
-40
-10
10
180°
120°
-30
-10
150°
300°
-20
-40
-20
120°
240°
60°
300°
-30
-30
-20
0
-10
-20
-40
-30
330°
30°
90°
-40
60°
60°
10
330°
0
-10
270°
90°
120°
0°
10
30°
150°
210°
10
180°
Horizontal
240°
210°
10
180°
8000Hz
6300Hz
5000Hz
16000Hz
12500Hz
10000Hz
Frequency Response
[dB]
110
100
90
80
70
60
50
20
50
100
500
1k
Frequency — SPL
5k
10k
DSP Filter ON
DSP Filter OFF
20k
[Hz]
Measurement distance: 4m
200
84 (3.31")
Bass reflex duct
(on the top surface only)
115 (4.53")
40 (1.57")
Input connector
MT-D0301 (option)
mountin panel
100
Front View
10
668 (26.31")
50
Side View
Rear View
5
Mounting screw (M5)
1
20
unit: mm
50
100
500
1k
Frequency — Beamwidth
5k
10k
Hor.
Ver.
20k
[Hz]
Measurement distance: 4m
TOA Corporation SR-H Series 3/7
Bottom View
336 (13.23")
Top View
250 (9.84")
[deg]
41.2 (1.62")
APPEARANCE AND DIMENSIONAL DIAGRAM
Beamwidth vs. Frequency
This recessed part on the bottom surface
does not function as a bass reflex duct.
CHARACTERISTIC DIAGRAMS (SR-H2S)
Polar Response
60°
vertical
horizontal
0°
10
0°
10
330°
30°
330°
30°
0
0
-10
-10
60°
300°
-20
300°
-20
-30
-30
-40
-40
60°
330°
60°
300°
-20
-30
-40
-40
60°
0
60°
-10
0
0
150°
4000Hz
3150Hz
2500Hz
300°
60°
-40
0
-10
-30
-40
270°
270°
90°
90°
-40
-40
-30
-30
-20
120°
240°
-20
120°
240°
-20
120°
-10
-10
-10
-10
0
0
0
0
150°
150°
210°
10
180°
210°
10
180°
8000Hz
6300Hz
5000Hz
150°
16000Hz
12500Hz
10000Hz
300°
-20
-40
Vertical
-30
240°
60°
300°
-20
-40
-30
330°
30°
270°
90°
-20
330°
0
-10
-30
270°
-40
4000Hz
3150Hz
2500Hz
0°
10
30°
-30
-40
210°
10
180°
2000Hz
1600Hz
1250Hz
0°
10
-20
240°
150°
210°
10
180°
330°
0
-10
60°
-20
120°
240°
0
30°
90°
120°
-20
-10
0
300°
-30
-30
120°
210°
-30
270°
-40
-10
-10
-20
-40
90°
0°
10
330°
30°
-30
270°
240°
10
180°
2000Hz
1600Hz
1250Hz
0°
10
300°
-20
-40
150°
210°
10
180°
60°
300°
-40
-20
120°
240°
-10
150°
0
-10
90°
-30
-20
330°
30°
330°
0
-10
-20
-40
-30
120°
1000Hz
800Hz
630Hz
0°
10
270°
90°
-40
210°
10
180°
500Hz
400Hz
315Hz
-30
270°
90°
150°
210°
30°
300°
-20
-30
0
0
10
180°
330°
0
240°
-10
0°
10
30°
-10
-20
120°
240°
150°
1000Hz
800Hz
630Hz
0°
10
0
-30
-20
120°
210°
-10
270°
-40
-10
10
180°
500Hz
400Hz
315Hz
0°
10
60°
-40
90°
-30
240°
150°
210°
30°
-30
270°
0
0
300°
-20
-40
-10
10
180°
60°
300°
-40
-20
120°
240°
-10
150°
-10
90°
-30
-20
0
-10
-20
-40
-30
330°
30°
-30
90°
-40
120°
330°
0
270°
270°
90°
0°
10
0°
10
30°
150°
210°
10
180°
Horizontal
240°
210°
10
180°
8000Hz
6300Hz
5000Hz
16000Hz
12500Hz
10000Hz
Frequency Response
[dB]
110
100
90
80
70
60
20
50
100
500
1k
Frequency — SPL
5k
10k
DSP Filter ON
DSP Filter OFF
20k
[Hz]
Measurement distance: 4m
[deg]
Bass reflex duct
40 (1.57")
Input connector
MT-D0301 (option)
mountin panel
100
Side View
Rear View
20°
10
663.4 (26.12")
Front View
ity angle
Directiv
50
Mounting screw (M5)
256 (10.08")
115 (4.53")
250 (9.84")
Top View
84 (3.31")
200
41.2 (1.62")
APPEARANCE AND DIMENSIONAL DIAGRAM
Beamwidth vs. Frequency
5
Bottom View
1
20
unit: mm
50
100
500
1k
Frequency — Beamwidth
5k
10k
Hor.
Ver.
20k
[Hz]
Measurement distance: 4m
TOA Corporation SR-H Series 4/7
CHARACTERISTIC DIAGRAMS (SR-H3L)
Polar Response
60°
vertical
horizontal
0°
10
0°
10
330°
30°
330°
30°
0
0
-10
-10
60°
300°
-20
300°
-20
-30
-30
-40
-40
270°
90°
0°
10
60°
-40
-30
240°
-30
-20
120°
-20
120°
240°
-10
-10
0
0
0
0
150°
210°
210°
10
180°
500Hz
400Hz
315Hz
330°
30°
150°
330°
0
-10
60°
300°
-20
210°
300°
-20
60°
330°
30°
0
0
-10
-10
60°
300°
-20
-30
-30
-30
-40
-40
-40
-40
270°
270°
-10
0
0
-20
120°
330°
330°
0
60°
300°
-20
210°
10
180°
2000Hz
1600Hz
1250Hz
0°
10
30°
-10
150°
210°
10
180°
0°
10
0
0
150°
4000Hz
3150Hz
2500Hz
60°
330°
30°
0
0
-10
-10
300°
-20
60°
-30
-30
-30
-40
-40
-40
-40
270°
270°
Vertical
270°
90°
90°
-40
240°
-10
0
0
240°
240°
-20
120°
0
150°
16000Hz
12500Hz
10000Hz
150°
210°
10
180°
Horizontal
240°
-10
0
210°
10
180°
8000Hz
6300Hz
5000Hz
-30
-20
120°
-10
150°
210°
10
180°
-40
-30
-20
120°
-10
150°
-40
-30
-20
270°
90°
-40
-30
300°
-20
-30
90°
4000Hz
3150Hz
2500Hz
0°
10
330°
30°
300°
-20
240°
-10
0
210°
-10
-20
120°
240°
-10
10
180°
2000Hz
1600Hz
1250Hz
0°
10
30°
240°
150°
210°
10
180°
-30
-30
-20
120°
240°
-10
-40
-40
-30
-20
150°
90°
90°
-40
-30
270°
270°
90°
-40
300°
-20
-30
90°
1000Hz
800Hz
630Hz
0°
10
330°
30°
240°
10
180°
500Hz
400Hz
315Hz
0°
10
30°
0
-10
150°
210°
10
180°
1000Hz
800Hz
630Hz
0°
10
0°
10
120°
270°
90°
-10
10
180°
60°
-40
270°
-10
150°
120°
-30
-40
-20
300°
-20
-40
-30
120°
240°
60°
300°
90°
-30
60°
-10
-20
-40
-20
0
-10
270°
-40
330°
30°
0
-30
90°
120°
0°
10
330°
30°
210°
10
180°
8000Hz
6300Hz
5000Hz
16000Hz
12500Hz
10000Hz
Frequency Response
[dB]
110
100
90
80
70
60
50
20
50
100
500
1k
Frequency — SPL
5k
10k
DSP Filter ON
DSP Filter OFF
20k
[Hz]
Measurement distance: 8m
Top View
115 (4.53")
200
Bass reflex duct
(on the top surface only)
40 (1.57")
Input connector
MT-D0301 (option)
mountin panel
100
250 (9.84")
Side View
Rear View
250 (9.84")
Front View
10
1186.4 (46.71")
50
5
1
20
50
100
500
1k
Frequency — Beamwidth
5k
10k
Hor.
Ver.
20k
[Hz]
Measurement distance: 8m
TOA Corporation SR-H Series 5/7
Mounting screw (M5)
unit: mm
Bottom View
302 (11.89")
84 (3.31")
302 (11.89")
[deg]
41.2 (1.62")
APPEARANCE AND DIMENSIONAL DIAGRAM
Beamwidth vs. Frequency
This recessed part on the bottom surface
does not function as a bass reflex duct.
CHARACTERISTIC DIAGRAMS (SR-H3S)
Polar Response
60°
vertical
horizontal
0°
10
0°
10
330°
30°
330°
30°
0
0
-10
-10
60°
300°
-20
300°
-20
-30
-30
-40
-40
0
210°
60°
-10
0
0
0
150°
0
-10
60°
300°
-20
60°
-40
-30
-30
240°
-20
120°
-20
120°
240°
-10
-10
-10
0
0
0
0
150°
210°
10
180°
210°
10
180°
2000Hz
1600Hz
1250Hz
330°
30°
150°
10
180°
330°
0
-10
60°
300°
-20
300°
-20
60°
270°
270°
-40
270°
-40
-40
-30
-20
120°
270°
90°
-30
240°
240°
-30
-20
120°
240°
-20
120°
-10
-10
-10
-10
0
0
0
0
150°
150°
210°
10
180°
210°
10
180°
8000Hz
6300Hz
5000Hz
150°
16000Hz
12500Hz
10000Hz
300°
-20
-30
90°
-40
-30
60°
300°
-40
Vertical
90°
-40
-20
0
-10
-30
-40
-40
90°
4000Hz
3150Hz
2500Hz
330°
30°
0
-10
-20
-30
-30
210°
0°
10
330°
30°
240°
10
180°
2000Hz
1600Hz
1250Hz
0°
10
30°
0
-10
150°
210°
4000Hz
3150Hz
2500Hz
0°
10
0°
10
120°
90°
-40
-20
120°
240°
270°
270°
-10
150°
60°
-40
-40
-30
-20
300°
-20
-30
90°
-40
-30
60°
300°
270°
90°
120°
0
-10
-30
270°
-40
1000Hz
800Hz
630Hz
330°
30°
0
-10
-20
-40
-40
210°
0°
10
330°
30°
240°
10
180°
500Hz
400Hz
315Hz
0°
10
-30
90°
150°
210°
10
180°
1000Hz
800Hz
630Hz
330°
0
-10
300°
-20
-10
210°
-30
-30
120°
240°
-10
30°
330°
270°
-40
-20
120°
0°
10
-20
-40
90°
-30
10
180°
500Hz
400Hz
315Hz
0°
10
30°
-30
-40
240°
150°
300°
-20
-40
-20
-10
60°
300°
90°
120°
240°
10
180°
-10
-30
-30
-20
0
-10
-20
-40
-30
150°
60°
330°
30°
270°
90°
-40
120°
0°
10
330°
0
270°
270°
90°
0°
10
30°
150°
210°
10
180°
Horizontal
210°
10
180°
8000Hz
6300Hz
5000Hz
240°
16000Hz
12500Hz
10000Hz
Frequency Response
[dB]
110
100
90
80
70
60
50
20
50
100
500
1k
Frequency — SPL
5k
10k
DSP Filter ON
DSP Filter OFF
20k
[Hz]
Measurement distance: 8m
[deg]
Top View
84 (3.31")
Bass reflex duct
157 (6.18")
40 (1.57")
41.2 (1.62")
APPEARANCE AND DIMENSIONAL DIAGRAM
Beamwidth vs. Frequency
Input connector
200
264 (10.39")
MT-D0301 (option)
mountin panel
100
250 (9.84")
Rear View
20°
254 (10")
5
Mounting screw (M5)
1
20
50
100
500
1k
Frequency — Beamwidth
5k
10k
Hor.
Ver.
20k
[Hz]
Measurement distance: 8m
TOA Corporation SR-H Series 6/7
Bottom View
250 (9.84")
Side View
ity angle
Directiv
Front View
10
1177.2 (46.35")
50
unit: mm
ARCHITECTURAL AND ENGINEERING SPECIFICATIONS
SR-H2L
SR-H3L
The [long throw] speaker shall be a slim profile design (84 mm in width). The
speaker shall consist of nine direct-radiating 7 cm (2.8") cone-type drivers
arranged in a vertical line and housed in a ported enclosure. The speaker shall
have a removable input connector.
The [long throw] speaker shall be a slim profile design (84 mm in width). The
speaker shall consist of 16 direct-radiating 7 cm (2.8") cone-type drivers arranged
in a vertical line and housed in a ported enclosure. The speaker shall have a
removable input connector.
Its unique aperture front grille structure shall enhance the horizontal frequency vs.
beam width response for more focused horizontal dispersion. The horizontal
coverage shall be 90 degrees. The vertical coverage shall be 0 degrees.
Extending the height of the cylinder-section which defines the coverage area shall
be possible by stacking this model with a longer model.
Its unique aperture front grille structure shall enhance the horizontal frequency vs.
beam width response for more focused horizontal dispersion. The horizontal
coverage shall be 90 degrees. The vertical coverage shall be 0 degrees.
Extending the height of the cylinder-section which defines the coverage area shall
be possible by stacking this model with another same model or a shorter model.
The speaker shall meet the following performance criteria. Power handling: 180 W
continuous program. Frequency response (10 dB below rated sensitivity, with
recommended equalization): 80 Hz to 18 kHz. Sensitivity (1 W, 1 m equivalent,
measured at 4 m): 92 dB. Impedance: 8 ohms nominal. When the optional line
matching transformer model MT-S0301 is installed, the available power taps shall
be: for 100 V line applications :10 and 30 W (330 and 1k ohms respectively) ; for
70 V line application: 5, 15 and 30 W (170, 330 and 1k ohms respectively).
The speaker shall meet the following performance criteria. Power handling: 360 W
continuous program. Frequency response (10 dB below rated sensitivity, with
recommended equalization): 110 Hz to 18 kHz. Sensitivity (1 W, 1 m equivalent,
measured at 8 m): 95 dB. Impedance: 8 ohms nominal. When the optional line
matching transformer model MT-S0301 is installed, the available power taps shall
be: for 100 V line applications :10 and 30 W (330 and 1k ohms respectively) ; for
70 V line application: 5, 15 and 30 W (170, 330 and 1k ohms respectively).
The speaker enclosure shall be made of medium density fiberboard and finished
with white urethane paint. The speaker grille shall be made from a single punched
steel plate and finished with white acrylic paint. The dimensions (W × H × D) shall
be 84 × 668.4 × 115 mm (3.31" × 26.31" × 4.53") and weight shall be 4.4 kg (9.7
lb). The mounting screws shall be equipped on the rear side of the product to
prevent the screws from being prominent. Available brackets for flying, and for
wall, ceiling and stand mounting shall be made of steel.
The speaker enclosure shall be made of medium density fiberboard and finished
with white urethane paint. The speaker grille shall be made from a single
punched steel plate and finished with white acrylic paint. The dimensions (W × H
× D) shall be 84 × 1186.4 × 115 mm (3.31" × 46.71" × 4.53") and weight shall be
7.6 kg (16.75 lb). The mounting screws shall be equipped on the rear side of the
product to prevent the screws from being prominent. Available brackets for flying,
and for wall, ceiling and stand mounting shall be made of steel.
The loudspeaker shall be TOA model SR-H2L.
The matching transformer shall be TOA model MT-S0301.
The extension plate shall be TOA model SR-EP3.
The flying bracket shall be TOA model SR-FB3.
The wall tilt bracket shall be TOA model SR-TB3.
The wall mounting bracket shall be TOA model SR-WB3.
The stand adapter shall be TOA model SR-SA3.
The loudspeaker shall be TOA model SR-H3L.
The matching transformer shall be TOA model MT-S0301.
The extension plate shall be TOA model SR-EP3.
The flying bracket shall be TOA model SR-FB3.
The wall tilt bracket shall be TOA model SR-TB3.
The wall mounting bracket shall be TOA model SR-WB3.
The stand adapter shall be TOA model SR-SA3.
SR-H2S
SR-H3S
The [short throw] speaker shall be a slim profile design (84 mm in width). The
speaker shall consist of nine direct-radiating 7 cm (2.8") cone-type drivers
arranged in a vertical line and housed in a ported enclosure. The speaker shall
have a removable input connector.
The [short throw] speaker shall be a slim profile design (84 mm in width).The
speaker shall consist of 16 direct-radiating 7 cm (2.8") cone-type drivers arranged
in a vertical line and housed in a ported enclosure. The speaker shall have a
removable input connector.
Its unique aperture front grille structure shall enhance the horizontal frequency vs.
beam width response for more focused horizontal dispersion. The horizontal
coverage shall be 90 degrees. The vertical coverage shall be 20 degrees.
Its unique aperture front grille structure shall enhance the horizontal frequency vs.
beam width response for more focused horizontal dispersion. The horizontal
coverage shall be 90 degrees. The vertical coverage shall be 20 degrees.
The speaker shall meet the following performance criteria. Power handling: 180 W
continuous program. Frequency response (10 dB below rated sensitivity, with
recommended equalization): 90 Hz to 17 kHz. Sensitivity (1 W, 1 m equivalent,
measured at 4 m): 90 dB. Impedance: 8 ohms nominal. When the optional line
matching transformer model MT-S0301 is installed, the available power taps shall
be: for 100 V line applications :10 and 30 W (330 and 1k ohms respectively) ; for
70 V line application: 5, 15 and 30 W (170, 330 and 1k ohms respectively).
The speaker shall meet the following performance criteria. Power handling: 360 W
continuous program. Frequency response (10 dB below rated sensitivity, with
recommended equalization): 90 Hz to 17 kHz. Sensitivity (1 W, 1 m equivalent,
measured at 8 m): 92 dB. Impedance: 8 ohms nominal. When the optional line
matching transformer model MT-S0301 is installed, the available power taps shall
be: for 100 V line applications :10 and 30 W (330 and 1k ohms respectively) ; for
70 V line application: 5, 15 and 30 W (170, 330 and 1k ohms respectively).
The speaker enclosure shall be made of medium density fiberboard and finished
with white urethane paint. The speaker grille shall be made from a single punched
steel plate and finished with white acrylic paint. The dimensions (W × H × D) shall
be 84 × 663.4 × 115 mm (3.31" × 26.12" × 4.53") and weight shall be 4.2 kg (9.26
lb). The mounting screws shall be equipped on the rear side of the product to
prevent the screws from being prominent. Available brackets for flying, and for
wall, ceiling and stand mounting shall be made of steel.
The speaker enclosure shall be made of medium density fiberboard and finished
with white urethane paint. The speaker grille shall be made from a single punched
steel plate and finished with white acrylic paint. The dimensions (W × H × D) shall
be 84 × 1177.2 × 157 mm (3.31" × 46.35" × 6.18") and weight shall be 7.9 kg
(17.42 lb). The mounting screws shall be equipped on the rear side of the product
to prevent the screws from being prominent. Available brackets for flying, and for
wall, ceiling and stand mounting shall be made of steel.
The loudspeaker shall be TOA model SR-H2S.
The matching transformer shall be TOA model MT-S0301.
The flying bracket shall be TOA model SR-FB3.
The wall tilt bracket shall be TOA model SR-TB3.
The wall mounting bracket shall be TOA model SR-WB3.
The stand adapter shall be TOA model SR-SA3.
The loudspeaker shall be TOA model SR-H3S.
The matching transformer shall be TOA model MT-S0301.
The flying bracket shall be TOA model SR-FB3.
The wall tilt bracket shall be TOA model SR-TB3.
The wall mounting bracket shall be TOA model SR-WB3.
The stand adapter shall be TOA model SR-SA3.
TOA Corporation
www.toa.jp
TOA Corporation SR-H Series 7/7
Specifications are subject to change without notice.
(0908) 833-52-404-30 u
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement