Maxon MX-6880 GSM Dual Band Mobile Phone คู่มือผู้ใช้

1
2
■
Weight 81g (with Slim battery)
3
■
Dimensions 80 x 42x 22 mm
4
■
Full Graphic Dual LCD Display
5
6
7
with EL back-lighting
■
WAP 1.1
8
9
10
10
■
Support Phase 2 + Features
■
SIM Application Tool Kit
■
Personal organizer
■
T9 Text input
■
Multi Party
■
CLIP/CLIR
■
Cell Broadcast
■
20 Numbers Redial
■
Power off timer
■
Calculator
5
■
World time
4
■
Games
■
Currency converter
■
Integrated Data / Fax modem
■
200 Extended Phonebook Memory
11
Earpiece
Microphone
antenna
Volume adjustment
Earphone jack
Ringing buzzer
Indicator
Outer display
Inner display
Battery lock/unlock knob
Folder (MX-6880)
Open to answer calls
close to end calls
1
6
11
9
3
Yes
8
7
2
Dial a displayed number, answer an
incoming call and store an entry
End a call, exit a feature and set
vibrator alert
Switch the phone ON and OFF
Clear a number
Upward search
Downward search
Enter the menu or go back one step
in the menu
Introduction
Security
Safety
Getting Started
Calls
Basics
The Phone Book
Network Features
Mobile Internet (WAP)
T9 Text Input
Miscellaneous
Organizer
Troubleshooting
Accessories
Index
ENGLISH
ENGLISH
Contents
1
2
3
4
5
6
7
8
9
10
11
12
Enter the phone book or select a
menu feature
The phone is normally set up to automatically show
display text in the language of the SIM. If this is not the
case, please refer to section 3 for language change
instructions.
Security
Congratulations on choosing the MAXON MX-6880 GSM
Dual Band mobile phone. This user guide describes the
features of MX-6880.
● if your phone is lost or stolen, you must report it to your
network operator or service provider so that they can bar
the phone and SIM from use. This is important as you
may be liable for the cost of unauthorized calls until the
equipment is barred
● when you ring the network operator or service provider
they will need the IMEI number of the phone. This is
printed on the label attached to the back of the phone
under the battery. Copy the number onto the label below
for future reference
The MX-6880 has been designed to operate on any digital
GSM network, GSM900, GSM1800 and GSM900/1800,
subject to individual network roaming agreements. GSM
has become a worldwide standard communications system,
giving you the freedom to stay in touch wherever you are.
Your mobile phone is intended for use with the supplied
rechargeable battery, charger and any of the approved
accessories shown in section 11 of this user guide. Other
usage will invalidate any approval and warranties given to
this equipment and may be dangerous.
The MX-6880 conforms to the GSM type approval for class
4 for GSM900 (2W) and class 1 for DCS1800 (1W) mobile
phones.
Maxon Telecom Co.,LTD reserves the right to make
changes and improvements to any of the products
described in this guide without prior notice.
© Maxon Telecom Co.,LTD.2002
● you can help prevent mobile phone crime by taking the
following precautions:
- always have the SIM PIN enabled and change it if
you think someone else knows the number
- Do not leave your phone visible in a vehicle when you
leave it. Take the phone with you or lock it in the boot
or glove compartment
- set call bars to limit fraudulent use
ENGLISH
ENGLISH
Introduction
Personal
● operation of any radio equipment including mobile
phones may interfere with the function of inadequately
shielded medical devices such as hearing aids and
pacemakers. You must consult the manufacturer of the
device or your physician before use
● observe restrictions on the use of radio equipment in fuel
depots, chemical plants, in areas where explosive gases
are present or where blasting operations are in progress.
Your mobile phone will continue to transmit call
responses if left in standby mode. You must switch off
when requested to do so
● do not move the antenna close to, or touching any
exposed part of the body when making a call, a damaged
antenna may cause a minor burn
Mobile Phone
● your mobile phone produces magnetic fields, do not
place next to magnetic storage media such as computer
diskettes
● operating your mobile phone close to other electrical
equipment such as televisions, phones, radios and
personal computers, may cause interference
● do not expose your mobile phone to strong sunlight,
direct heat or liquids
(such as water)
Battery
● do not short circuit the battery terminals. This will damage
the battery, produce heat and may cause a fire
● never dispose of batteries in a fire as this can cause them
to explode. Return dead batteries to your supplier or an
approved recycling centre. DO NOT put in with the
household waste
WARNING: If the battery case breaks, avoid contact
with the contents. Wash contaminated skin with lots of
water and seek medical attention if necessary.
On the Road
● before making or receiving calls acquaint yourself
thoroughly with the applicable local laws and guidelines
regarding the use of mobile radio telephones and
observe them at all times
● air safety bags, anti-lock brakes, speed control and fuel
injection systems are normally immune to radio
transmissions, but if you experience problems, consult
your vehicle dealer
● switch off your mobile phone when refuelling or where
there are signs restricting the use of 2-way radio
equipment. Do not store or carry flammable or explosive
materials in the same compartment as your mobile
phone, internal sparks could cause ignition
Inside Aircraft
● switch off your mobile phone when in an aircraft. The use
of mobile phones in an aircraft may be dangerous to the
operation of the aircraft, disrupt the cellular network and
is illegal
ENGLISH
ENGLISH
Safety
Read this section before attempting to use your phone. It
tells you how to attach, charge and care for the phone’s
battery. We have also included general information
about the digital GSM network and given instructions of
how to insert and unlock the SIM. Your phone has an
indicator to visually show its status when you cannot see
the display. Details about the indicator are also shown in
this section.
The Battery
Removing and Attaching
the Battery
Charging the Battery
Battery Performance
Battery Power Level
1.1
1.1
1.1
1.4
1.4
Network Connection
The SIM
Inserting the SIM
Set Time
Unlocking the SIM
Connecting to the Network
1.5
1.5
1.6
1.7
1.7
1.8
The Display
1.9
The Indicator LED
1.11
ENGLISH
ENGLISH
Getting Started
1
Your phone is supplied with a rechargeable battery and
quick charger. Before you use the phone for the first time, it
is important that you fully charge the battery.
WARNING: Charge the battery in a well-ventilated area
between +5 and +40 using the supplied charger. The
use of non-approved chargers could result in a fire or
injury through an electrical shock and will invalidate all
warranties given on this product.
ENGLISH
ENGLISH
The Battery
Removing and Attaching the Battery
1
1.1
● to remove, slide in the direction of the arrow 1 then
remove the battery from the phone 2
● to attach, place the battery on the phone and slide to the
bottom of the phone 3 and lock the battery in position 4
Charging the Battery
● insert the charger connector into the base of the phone 5
● plug the charger into the power supply. A filling battery
symbol and charging Animation in the display indicates
charging 6
● the battery is recharged when the symbol remains all
black This takes approximately 3 hours depending on
the size of the battery. It is normal for the battery, phone
and charger to become warm during charging
● after charging, switch OFF the power supply, then
disconnect the charger from the phone and the power
supply 7
1
1.2
Battery Performance
To maintain battery performance you should operate the
phone until you will see the low power warning message
LOW BATTERY or preferable, the phone switches itself
OFF. If the battery is only partly used before recharging, it
can self-adjust to holding a reduced charge with the
resultant progressive reduction in operating time.
The standby and talk times quoted are estimates based
on ideal operating conditions. Battery life achieved in
use will vary between networks and with different
conditions and applications.
Battery Power Level
The battery power level is shown in the top left corner of the
display when you switch the phone ON. Five levels are
displayed from full (all black) to empty.
The phone will automatically switch OFF shortly after the
empty battery symbol starts flashing and ‘LOW BATTERY’
appears on display. You can clear the message temporarily
by pressing any key.
ENGLISH
ENGLISH
1
1.3
Removing
1
1.4
1.5
ENGLISH
ENGLISH
1
Network Connection
The SIM
Your network provider will supply you with a plug-in SIM for
use with your phone. The SIM (Subscriber Identity Module)
is your personal key to the digital GSM network.
All the information needed to connect you to the network
and to initiate billing for your calls is stored in the goldplated area along with names, numbers and messages
which you have entered into the phone book or received.
The SIM can be removed and inserted into any GSM
phone using the same size reader (the new phone
automatically takes the identity of the SIM).
To prevent losing or corrupting information, avoid touching
the gold area and do not place the SIM near electrical or
magnetic fields. A damaged SIM will not allow you to
access the GSM network.
WARNING: Always switch the phone OFF before
removing the battery or SIM. Never insert or remove the
SIM when an external power supply (e.g. the quick
charger) is connected, otherwise the SIM may be
damaged .
1
1.6
Inserting the SIM
The SIM will probably be supplied in a card holder and you
will need to carefully press it free before fitting.
● switch OFF the phone, remove the battery and any
external power supply
● slide the SIM card holder 1 to the direction of the
position. 2
● insert SIM card 3 and then slide SIM card holder to the
direction of the arrow in order to lock 4
● if you need to remove the SIM, remove the battery,
disengage the lock then carefully lift and slide the SIM
from the phone
● enter the current time. For
example if the time is 12:34
(Use the
key
to clear an error)
1
If you enter the wrong PIN1 three times in succession,
your SIM will be barred from the network and the phone
will ask for the PUK 1. Refer to section 10 for help.
IMPORTANT: The supplied PIN1 (4 to 8 digits) may be
a standard number used for all SIM’s issued by your
network operator, you should therefore change it to any
personal number of your choice as soon as possible.
Please refer to section 3 for instructions.
1.7
ENGLISH
ENGLISH
Set Time
1
1.8
Unlocking the SIM
Connecting to the Network
To prevent unauthorized use, the SIM is protected by a
PIN1 (Personal Identity Number) code. When enabled, you
must enter the PIN1 each time you switch your phone ON.
This will unlock the SIM and allow you to make and receive
calls. You can choose to disable the PIN1 (refer to section
3) in which case your SIM will not be protected against
unauthorised use.
● press and hold
to switch
the phone ON
● enter the PIN1 then
(use the
key to clear
an error). For example if
the PIN is set to 1234
After unlocking the SIM, the phone will make an automatic
search for your home network or another suitable operator
in your location (SEARCHING Displayed). When
connected, the name of the operator appears in the center
of the display.
Your mobile phone is now in standby mode, ready to make
and receive calls.
EMERGENCY CALLS ONLY means that you are
outside co-operating network coverage but you can still
make emergency calls subject to signal strength.
The display will give you a lot of information via its
indicators and symbols.
Indicates that the alarm is set.
Signal strength is indicated by the bars in the top
right of the display (6 bars for optimum signal
strength).
1
i
1.9
Indicates that the Broadcast is set. If a Barring or
Forwarding is set this icon will not be shown.
Indicates that the phone is on line via the mobile
internet.
Indicates your current position in the display.
Indicates your current selection.
The scrollbar appears when the menu contains
more than 6 or 8 options, and it indicates if you
can scroll up or down.
Indicates the battery power level.
The envelope indicates that you have received a
message. A text message is shown as an
envelope, and a voice message is an envelope
with >>. The voice message has higher priority
than the other in case you receive both types of
messages. After listening to the recorded message
the >> will disappear and the envelope will inform
you that you also have a text message.
Indicates that the phone is sending or receiving
data.
Indicates that the phone is in silent mode.
Indicates your current level
ENGLISH
ENGLISH
Actual time can be set in either 24 hrs. or AM/PM
format.
The Display
1
1.10
Calls
In Service
The phone has a built-in indicator which can show Green
and flashes at different speeds according to the status of
the phone and battery.
Out of Service
After setting up the phone, you will want to make and
receive calls. This section gives you all the basic
information you will need.
2
The phone has a built-in indicator which can show Red and
flashes at different speeds according to the status of the
phone and battery.
Making Calls
National Calls
Calls to a Fixed Phone Extension
International Calls
Call List
2.1
2.1
2.2
2.2
2.2
Indicator Flash Speed
Emergency Calls
2.3
Answering Calls
Missed Calls
2.4
2.4
The indicator has the following flash speeds:
Normal
Information
Alert
Indicator Operator
Normal :
Information :
Alert :
Solid :
In Service,Calling
SMS message,Missed call
Incoming call
Battery charging complete
ENGLISH
ENGLISH
1
1.11
The Indicator LED
● some fixed extension phones cannot be called directly,
you need to connect to the exchange before dialling the
extension number. The phone will do all the dialling for
you with one key press provided that you enter a pause
(-) between the telephone (exchange) number and the
extension number. To enter a pause, press
three
times (shown as
below)
AREA CODE NUMBER EXTENSION (if used)
The network operator name must
appear in the center of the display
before you can make or receive calls.
Signal strength is indicated by the
bars in the top right of the display (six
bars for optimum signal strength).
2.1
Call quality can be affected by physical obstructions, so
moving only a few metres may significantly improve signal
strength.
National Calls
● if the country you are operating
in uses area codes, they must
be included even when making
local calls.
‘CALLING’ appears during
dialling and changes to
‘ACTIVE’ when connected
● unlike most fixed phones, you don’t need to enter a
separate exit code to get an international line out of the
country you are calling from, simply enter ‘+’ (by pressing
until + is displayed), the code of the country you are
calling and the full telephone number
COUNTRY CODE FULL NUMBER ● for example, to make a call to France:
(+ displayed) FULL NUMBER Call List
AREA CODE NUMBER (if used)
● to hang up at the end of the call press
(even if the other person hangs up first)
International Calls
or close the flip
● called and received numbers are stored as a list in the
phone with the last number at the top of the list. Each
number is identified as outgoing, incoming, SMS or
missed. Old numbers are automatically deleted when the
call list is full. To see the list
(latest)
(search)
● any displayed number on the list can be dialled by
pressing
● the call list can be reset (cleared)
ENGLISH
ENGLISH
2
Calls to a Fixed Phone Extension
Making Calls
2
2.2
Answering Calls
● it should be possible to call the emergency services in
any country which uses the digital GSM network provided
you are within network coverage (check for signal
strength bars). If your network operator does not have a
roaming agreement in the area (no displayed name)
‘EMERGENCY CALLS ONLY’ will appear to let you know
that this type of call is available.
It is possible to make the call even if the SIM has been
removed provided that you are within network coverage
● When the Folder is closed, to answer an incoming call,
open the Folder.
EMERGENCY
CALLS ONLY
2
2.4
● When the Folder is opened,to answer an incoming call,
press
● to hang up at the end of the call press
or close the
Folder (even if the other person hangs up first)
● When the folder is closed, pressing a long volume key
(increase key or decrease key) rejects the incoming call.
Missed Calls
● 112 is the standard GSM emergency number which can
be used on any GSM network worldwide
● a local alternative to 112 can be stored in a reserved slot
in the phone, please refer to section 4 for details
ENGLISH
ENGLISH
2
2.3
Emergency Calls
● If you do not answer an incoming call the phone will store
the calling number in the ‘all List’ and display the number
of missed calls
● clear the message then search through the ‘all List’ for
the calling number
This section will help you to get to know the phone’s
features, phone book and call menus, provides details
about customising the phone for your own use and
shows you how to use the basic operating features.
3
The Feature Menu
Selecting a Feature by Search
Selecting a Feature by Number
Feature Menu Structure
Call Menu Structure
Phone Book Menu Structure
3.1
3.2
3.3
3.3
3.3
3.4
Customising
Display Text
Greeting Animation and Message
SIM PIN 1 Change
SIM PIN 2 Change
Keypad Lock
Redialling
Ring Tones and Melodies
Vibrating
Keypad Sound
Information Tones
Backlight
Contrast
Layout
3.4
3.4
3.4
3.4
3.5
3.5
3.5
3.6
3.6
3.7
3.7
3.7
3.8
3.8
Basic Features
Voice Mail
Billing (Advice of Charge)
DTMF Tones
Earpiece Volume
Scratch Pad
Any Key Answer
Call Timer
Alarm
Off Timer
Time
Data
Reset
3.9
3.9
3.10
3.11
3.11
3.11
3.12
3.12
3.12
3.13
3.13
3.13
3.13
ENGLISH
ENGLISH
Basics
3
All the operating features of the phone are stored in the
easy to use menu. A feature can be selected directly via its
feature number (see list on next page) or by searching and
selecting using the keys (to move the cursor) at the top of
the keypad as follows:
3
3.1
Selecting a Feature by Search
(group)
(feature) As long as you press up/down key, you can see the feature
menu with icon as below.
If network support the SIM Application Toolkit, “SAT”menu
will appear as number “0”menu.
ENGLISH
ENGLISH
The Feature Menu
3
- enter the feature menu or go back one step.
- select a menu group or feature
- search through the groups and features
- hold to exit the menu
- store an entry
- exit a feature
3.2
ENGLISH
3
3.3
Selecting a Feature by Number
FEATURE NUMBER ● for example, to change the ring type:
(hold)
Please note that you can press and hold
,
to
exit a menu feature (the phone will exit on its own after a
long delay)
Feature Menu Structure
1. MESSAGE
111.
112.
113.
114.
115.
116.
117.
118.
119.
1110.
1111.
11. SMS
12. VOICE MAIL
5. CALCULATOR
READ
SEND/EDIT
SEND ONLY
REPLY
DELETE
TEMPLATE
FORMAT
S.C.NUMBER
VALIDITY
ALERT TONE
T9 LANGUAGE
2. WAP
21. HOME
3. ORGANIZER
31. DAILY
22. BOOKMARKS
23. PROFILES
311.
312.
313.
314.
315.
316.
317.
318.
VIEW ENTRIES
NEW ENTRY
GO TO DAY
GO TO WEEK
VIEW WEEKLY
VIEW MONTHLY
VIEW TO DO’S
SETTINGS
4. SETTINGS
41. PHONE
411.
412.
413.
414.
415.
LANGUAGE
GREETING
PIN 1 CODE
PIN 2 CODE
INDICATOR
42. CALL
421.
422.
423.
424.
425.
426.
BILLING
REDIALLING
CALL WAITING
SEND DTMF
ANSWER KEY
CALL TIMER
43. AUDIO
431.
432.
433.
434.
435.
RING VOLUME
RING TYPE
VIBRATE
KEY SOUND
INFO. TONES
44. CLOCK
441.
442.
443.
444.
445.
446.
ALARM 1
ALARM 2
OFF TIMER
TIME
FORMAT
DATE
45. DATA
451. BIT RATE
452. FORMAT
453. RESET
46. DISPLAY
461. BACKLIGHT
462. CONTRAST
47. RESET
471. CALL LIST
472. SETTINGS
24. EMPTY CACHE
121. LISTEN
122. NUMBER
25. T9 LANGUAGE
13.BROADCAST
131.
132.
133.
134.
135.
136.
READ
ON
OFF
CHANNELS
LANGUAGE
ALERT TONE
51. CURRENCY
CONVERSION
511. IN FOREIGN
512. IN DOMESTIC
6. WORLD TIME
7. GAMES
71. MEMORY
8. NETWORK
81. FORWARDING
72. CASINO
811.
812.
813.
814.
815.
NO REPLAY
WHEN BUSY
NOT REACH
ALL
CANCEL
821.
822.
823.
824.
OUTGOING
INCOMING
CANCEL
NEW
PASSWORD
52. CALCULATE
8.2 BARRING
73. ADVENTURE
8.3 NETWORK SET
Call Menu Structure (see section 5 for details)
CALL MENU
CALL 1
CALL 2
RETRIEVE
END
HOLD
JOIN
SPLIT
MENU
831.
832.
833.
834.
835.
MODE
SEARCH
PREFERRED
RESELECT
NEW NETWORK
Phone Book Menu Structure (see section 4 for details)
Display Text
● The phone will display text in the language of the SIM
(automatic) or you can choose a language from a list
(select)
Greeting Animation and Message
● You can select one of three greeting animation to be
displayed each time the phone is switched ON and
OFF
(select)
● You can input a 36 character message (3 lines of 12
Characters) to be displayed each time the phone is
switched ON
ENGLISH
Customising
input message ● Please refer to ‘The Phone Book’ (page 4.1) if you do not
know how to enter text. The number of characters
remaining for the message is shown in the top right of the
display
SIM PIN1 Change
● Your SIM is protected by a secret PIN1 to prevent
unauthorised use. If you want to change the PIN1 you
can change it to any four to eight digit PIN of your choice
3
3.4
NEW PIN 1
OLD PIN1
NEW PIN 1
● the volume and type of ring tone can be changed
volume:
● The PIN can be disabled to allow other people to use
your phone without having to reveal the PIN. Remember
to enable the PIN1 again after their use
Ring Tones and Melodies
PIN1
(select/hear)
type:
(select/hear)
3
3.5
3.6
Vibrating
SIM PIN2 Change
● A second PIN(PIN2) is used to protect memory B on the
SIM (refer to page 4.1 for details). you can change the
PIN2 just like the PIN1
NEW PIN 2
OLD PIN2
NEW PIN 2
Redialling
● You can set the phone to automatically redial an
engaged (busy) number (up to 10 attempts are made). A
tone sounds at each redial and when the call is
connected
● to stop redialling at any time press
ENGLISH
ENGLISH
3
(select)
or close folder
● You can set the phone to vibrator.
If you want it not to ring, set the audio volume off.
● One touch Vibration alert
In idle mode,you can set the phone to vibration only
(silent mode)or to start ringing,simply done by pressing
one of the shortcut keys
long key press to release the
mode, press
long again.
This has the phone be set as below.
BEFORE
AFTER
Phone Bell
Alarm
Message
Key Tone
Adjust Volume
Vibration
One Vibration
One Vibration
Off
Off (exception min/max)
Contrast
● to change the sound of the keypad (beep, tones, off)
● the contrast can be changed
(select)
(select and see)
ENGLISH
ENGLISH
Keypad Sound
Information Tones
3
3.7
● you can switch the information tones (see list below) ON
and OFF
(select)
● an information tone sounds when:
- the battery is low
- a call is proceeding
- switching the phone ON/OFF
- auto redialling
- location update
- call set up fails etc.
Backlight
● the backlight can be switched off to save battery power or
set to automatically switch on for several seconds each
time a key is pressed
(select and see)
3
3.8
● to enter the voice mail number
● When a voice mail received it displays animated icon on
outer LCD.
Billing (Advice of Charge)
NUMBER Voice Mail
3
The phone has built-in call timers which can be used to
display the cost of outgoing calls and limit the use of the
phone by cost. To enable the feature to work you must
select the currency and enter the current call price per unit.
3.9
ENGLISH
ENGLISH
Basic Features
3
3.10
This advice of charge feature is not supported by all
network operators and may be subject to tariff
restrictions
● if you subscribe to a voice mail service where the
message retrieval number is fixed on the SIM card, you
can access One touch Mail by long pressing on Key 1.
(memory location 1 will be reserved for One Touch Voice
Mail)
PRESS 3 SEC
● if you subscribe to a voice mail service where the
number is not fixed on the SIM, you can either place it in
memory location 1 or into the reserved memory slot.
Select “LISTEN” in the Voice Mail menu to hear your
message.
● To listen to your messages.
(‘CALLING’ appears when the number is dialed)
Viewing Call Costs
● Call cost information is displayed in the following order:
LEFT - the remaining amount of the maximum allowed
costs
LAST - the cost of the last call
TOTAL -STATUS - the cost of all calls since the last reset
-CLEAR - select to reset the total cost (status)
MAXIMUM -STATUS - the maximum allowed cost
-EDIT
- select to change the maximum
allowed cost
STATUS
- check the current rate and currency
PRICE/UNIT - edit the call price per unit
CURRENCY - select a currency
3
3.11
DTMF Tones
● Your phone automatically generates DTMF tones so that
you can control advanced facilities such as paging,
messaging and home banking services. The tones can
be annoying to your caller when entering numbers on
display during a call (refer to Scratch Pad) and could
cause accidental operation of a connected facility. To
prevent this you can switch the tones OFF and ON when
necessary
● to adjust the earpiece volume, press the volume keys on
the side of the phone
(latest) (decrease)
Scratch Pad
● while engaged in a call, you can make a note of a
telephone number using the keypad. You may want to
inform your caller that audible tones will be generated
(search) (dial)
● You can set the phone to answer incoming calls via the
SEND key or the volume keys and,
,
and
keys
Call Timer
● You can check duration of last call made (bottom line of
display) and total call time
Alarm
● You can set two types of alarm
Alarm 1 is repeating:
ENTER TIME
Alarm 2 is only active once:
3
3.12
Any Key Answer
Earpiece Volume
(increase)
when you press the keys (you have the option to turn the
tones OFF, refer to DTMF tones above)
● the noted number is stored in the phone as the last
dialled number (refer to Call List on page 2.2), so you can
recall and dial it later. If other numbers are dialled before
recall, you will have to search for the noted number in the
list
ENGLISH
ENGLISH
Setting Up Billing
● All the call cost information that you need to enter can be
checked and edited through one menu:
ENTER TIME
Off Timer (Power Off Timer)
● To can set a time to off the phone automatically
Set Time :
3
3.13
Set ON/OFF :
Everything you need to know about the phone book has
been grouped together in this section, from storing
names and numbers to recalling and dialling.
ENTER TIME
(ON)
(OFF)
Time
● The time is shown in the display. The time should always
be entered in 24 hrs format. The time can be set
ENTER TIME ● You can choose to have the time shown in AM/PM if
chosen under format
(select)
Data
● A data cable is available as an accessory. A user manual
describing the facilities will accompany the cable. Contact
your local dealer
The Phone Book
ENGLISH
ENGLISH
● The alarm will be active for 60 seconds in volume. When
the alarm is active, press
to cancel. When an alarm is
set, a bell will be displayed in the top of the display
Reset
● The phone can be reset to the original manufacture
settings
The Phone Book
Storing Information
Storing a Number and Name
To Look up a Number
Phone Book Dialling
To Edit
Copy to/from SIM
Deleting Entries
Your Own Number
Memory Access
Emergency Number
Memory Status
4.1
4.1
4.2
4.3
4.3
4.3
4.4
4.4
4.5
4.5
4.6
4.6
4
1 SPACE
7PQRS
7pqrs
The phone can store telephone numbers and names onto
the SIM. This means that you will always have important
numbers with you, even if the SIM is being used in a
different phone. The number of memory locations and the
number of characters and digits that you can store in each
location are SIM dependent.
Every SIM has a MEMORY A, and some have an
additional MEMORY B which is protected by the PIN2.
Please refer to separate heading ‘Memory Access’ for
details of MEMORY B.
2ABC ÅÄÆ
2abc åäæ
8TUVÜ
8tuvü
3DEFÉ
3defé
9WXYZ
9wxyz
4GHI
4ghi
✽
5JKL
5jkl
&()
Storing Information
6MNO ÖØ
6mnoöø
#. , ; : ” ’ ? ! ¡ ¿
● each dialling key is used to enter several characters (see
table). Repeatedly press the key that shows the
character that you want until it appears on the display.
Wait for the cursor to move before entering the next
character
● when you need a space, press
once. Holding down
a key will change from upper (A) to lower (a) case
characters. Press and hold again to change back
● use the
key to clear errors, a short press for the last
character or press and hold for the complete entry
ENGLISH
ENGLISH
4
4.1
The Phone Book
4
+–/=
4.2
%£$¥ @§
Storing a Number and Name
● enter the phone book menu
● select NEW for MEMORY A
or NEW B for MEMORY B
or NEW C for MEMORY C
(or
● select a location number from the list
)
● enter the telephone number NUMBER ● It is a good idea to always add + and the country code to
a phone number then you can use your phone book
abroad and it will still work inside your own country
Press and hold
or
Copy to/from SIM
to exit the phone book.
To Look up a Number
● enter the phone book and select LOOK UP
● to look up in alphabetical order
4
4.3
● to look up in location number order
(select STATUS)
(select COPY TO A)
Phone Book Dialling
(select a item) ● Copy from SIM to phone
There are five ways to dial a stored number.
● press and hold
Enter the phone book menu and select STATUS.
Select COPY TO A (or COPY TO C) then it is displayed
entry. You can copy the selected entry in SIM card (or
phone)
● Copy from phone to SIM
to dial number stored in location 1
(select a item) ● look up the number (see above)
● enter location number, press
press
MEMORY B, press
to view the number then
● enter the phone book, press
name
MEMORY A,
MEMORY C,
then the initial letters of
INSTALL LETTER ● press the last number of the location number for 3 sec.
and the stored number is dialled
● enter the phone book and select EDIT
Deleting Entries
● Enter the phone book and select DELETE
● look up the name and select
)
● edit and store both of number and name.
EDIT NAME /
● Look up the name and delete
(or
EDIT NUMBER If it is displayed “NO enough room”,it results from the
reason why the capacity of the copying items is bigger
than left capacity in target.Therefore,you may retry it
after that you have enough space in target.
(or
To Edit
4
4.4
(select STATUS)
(select COPY TO C)
ENGLISH
ENGLISH
● enter the name NAME )
Emergency Number
● You can store your own number if the SIM supports it
● you can enter an alternative emergency service number
into a special location
4
Memory Access
(or
) ● If your SIM does not support your own number, you
can store it in the Phone Book
(or
) NUMBER ENGLISH
ENGLISH
Your Own Number
Memory Status
4.5
● if your SIM has two phone book memories
(MEMORY A and MEMORY B) you can access both A
and B or only B (sometimes MEMORY B is referred to as
Fixed Dialled Numbers)
● if you have selected ONLY B, you can only call numbers
stored in MEMORY B
PIN 2
● activating ONLY B locks supplementary network services
such as call forwarding, call barring, sending SMS and
call waiting. You must deactivate before you can change
the status of these services
● selecting A and B reinstates Memory A and gives access
to call any number
● you can display the number of free, occupied and the
total number of entries in either or both memories
(SELECT STATUS) 4
4.6
Text Messages
In addition to making and receiving calls, the digital GSM
network offers other advanced benefits detailed in this
section. Some of the features may not be supported by
your network operator or by a foreign network when
roaming.
Your phone can send and receive short text messages
provided that your network operator supports the service
(you may have to pay a subscription). There are two types
of messages, SMS and Cell Broadcast.
5
SMS Messages (refer to page 5.3)
Text Message
5.1
SMS Messages
5.3
Cell Broadcasts
5.8
Call Forwarding
5.10
Call Barring
5.12
Network Selection
5.14
Call Menu
5.17
Messages of up to 160 characters can be sent specifically
to your phone via a Service Centre. If the message
contains a reply number, you can dial it directly by placing
the cursor under the number then press . The phone also
gives you the facility to send a reply message or send new
messages (via a Service Centre) to other digital GSM
phones operating on a suitable network. If the SMS service
is supported by your network operator, you should be able
to receive and send messages in your home country and
from abroad.
Cell Broadcast (refer to page 5.8)
These are general information messages sent out by the
network operator or an approved information supplier. Cell
broadcast messages are typically local weather and
travel/traffic reports, stock market prices, sports results or
maybe specialist network services.
To enable you to view the information you must enter the
channel number or code supplied for each service and a
ENGLISH
ENGLISH
Network Features
5
5.1
SMS Messages
Receiving SMS Messages
When a new message is received, it displays animated icon
on outer LCD.
ENGLISH
ENGLISH
language then switch the feature ON. The number of
channel locations on the SIM is limited to its memory
capacity, so you may have to overwrite old channel
numbers to enter new one.
Note: Contact your local dealer for information about
the broadcast channel numbers.
5
5
5.2
5.3
● an alert tone sounds each time a new message is
received (this can be disabled, refer to page 5.8) then the
message is automatically stored on the SIM. The number
of stored messages (including messages to be sent) is
dependant on the capacity of the SIM, therefore it is
important to delete old messages as soon as possible
Reading SMS Messages
● enter the READ menu and select the message you want,
unread messages are indicated by a black diamond (read)
● the first message display contains details of the sender,
the next contains the message
● if the message includes a reply number, position the
cursor on the number then press
to dial
● press
to exit message reading
Sending SMS Messages
● before you can send a message you must:
- enter your Service Center number, you only need to do
this once. Refer to page 5.6
- create and store a message in the SIM memory (you
need to include the number where the message is to be
sent). Refer to page 5.5
Editing Messages
● enter the SEND/EDIT menu, select the message, edit if
necessary then send. Messages that have not been sent
successfully or not sent yet are marked by a black
diamond ● the procedure for editing a message is the same as
creating a new message except you select the message
you want to change instead of selecting a vacant
location. If your phone is equipped with the T9 Text input,
the feature will be available when you type an SMS
message. Go to section 7 for information about T9.
SELECT
5
5.4
(TYPE NUMBER) (or
(EDIT)
(TYPE INITIAL LETTER)
Creating New Messages
(CHECK RECEIVING
(SELECT))
● enter the SEND/EDIT menu and select a vacant location.
The template message will appear if the template feature
is switched ON. If the memory is full, you will need to
delete or edit an existing message
YES/NO
NUMBER/EDIT)
SENDING STORING
● Only if you want to send a SMS message not to store,
enter the SEND ONLY menu
(EDIT)
(TYPE NUMBER)
SENDING
● enter your message (or edit an existing message), the
number of available characters is displayed in the top
right of the screen, press
to store
Replying to SMS Messages
● if the Service Center number has not been entered, the
phone will ask for it here, enter and press
● you can reply directly back to the sender of a SMS
message without having to enter their details
● enter the number where the message is to be sent (it can
be retrieved from the Phone Book by pressing
SELECT
(CHECK RECEIVING NUMBER)
(SEND)
Deleting Messages
● to delete old messages
(DELETE)
REPLY
) then press
● select NO to store the message or YES to send and store
YES/NO
ENGLISH
ENGLISH
To Send a SMS Message
5
5.5
Message Format
● if your regularly send similar messages, you can create a
template which will automatically appear (ready to edit)
each time you create a new message provided that the
feature is switched ON
● for example:
Dear.......
....new name and message added each time...
Best regards
Jane
● you can leave your own message each time you recall
the template
● you must select TEXT format to send SMS text
messages
TEMPLATE MESSAGES
● to switch the template ON and OFF
● if supported by the network, a SMS message can be
forwarded as a fax or an e-mail provided you select the
correct message format. Please contact your network
operator for further information
Message Alert
● you can set the phone to alert you with a tone each time
a new message is received in addition to the indicator
flashing at ‘information’ speed(refer to page 1.11 for
indicator details)
(SELECT ALETR TONE)
Entering the Service Centre (S.C.) Number
Message T9 Language
● the SMS Service Centre number will be supplied by your
network operator if the service is supported
● For phones with T9 Text input the spelling language is
selected here
Message Validity Period
● the Service Centre will repeatedly transmit a sent
message until the message is received, within a set time
period. The validity period which you set will apply to all
sent messages (MAXIMUM means 63 weeks)
5
5.7
(SELECT LEVEL)
SERVICE CENTER NUMBER
ENGLISH
ENGLISH
5
5.6
Creating a Template Message
(SELECT T9 LANGUAGE)
(SELECT LANGUAGE)
Switching Cell Broadcasting ON/OFF
● there must be at least one channel entered and one
language selected before you can switch cell
broadcasting ON
(ON)
5
5.8
(OFF)
● switching cell broadcasting OFF will save battery power
Cell Broadcast Language
● your phone can only receive messages if the language of
broadcast has been entered in a preferred language list.
It is a good idea to have more than one language in the
list if you travel abroad, otherwise you will not receive
broadcast messages. There must be at least one entry
before the cell broadcast feature can be switched ON
5
● to view the list
5.9
Cell Broadcasting Channels
● to view the list of selected channels
● to add to the list
(SELECT LOCATION)
● to add a new channel
(select position)
(select position)
(SELECT LOCATION)
CHANNEL
● to delete a channel
Displaying Cell Broadcasting Messages
● display the message list and choose a message to read
Broadcast Alert
● the phone can be set to alert you with a tone each time a
new message is received
● to delete a language
ENGLISH
ENGLISH
Cell Broadcasts
There are two call forwarding options which you can use to
be assured that all your incoming calls are answered. The
phone number which the calls are forwarded (diverted) to
can be entered via the keypad or recalled from the Phone
Book.
5
5.10
Call forwarding is not supported by all network operators
and may be subject to tariff restrictions, please check
before attempting to select. Your network operator may
provide alternative instructions to those shown below
(not via the menu) - these will work with your phone.
Each call will be diverted:
NO REPLY
- after a set number of seconds
number
WHEN BUSY
- if your phone is engaged
number
NOT REACH
- if your phone is outside coverage or
switched off
number
ALL
- all calls are diverted, your phone won’t ring
number
● You can check the status and cancel each option
individually (via the sub menu) or cancel ALL options
simultaneously
CANCEL
After activating or cancelling call forwarding, wait for the
acceptance message to be displayed before pressing
or
to exit.
ENGLISH
ENGLISH
Call Forwarding
5
5.11
5.12
You can set any combination of the following call bars to
help manage network usage and increase security. The
network provider will supply a special four digit password so
that you can activate the call bars. You can change the
password to any four digit code of your choice if you find it
difficult to remember or think someone else knows it.
Call bars are not supported by all network operators and
may be subject to tariff restrictions - please check before
attempting to select. Your network operator may provide
alternative instructions to those shown below (not via the
menu) - these will work with your phone.
If you enter the wrong password three times in
succession, the service will be blocked. You must then
contact your network operator for unblocking.
CANCEL
INCOMING
PASSWORD
ALL
ROAMING
- bars all incoming calls
- allows incoming calls only when
operating on the home network
CANCEL
- cancel all incoming call bars
● you can check the status and cancel each call bar option
individually (via the sub menu) or cancel ALL options
simultaneously
CANCEL
PASSWORD
NEW PASSWORD
● if you wish to change the password
● call bar options are divided into two groups in the menu
OUTGOING
PASSWORD
ALL CALLS
- bars all outgoing calls
INTERNATIONAL - 1 ALL CALLS - bars all outgoing
international calls
- 2 EXCEPT HOME - bars all outgoing
international calls except those back
to the home country and calls within
the country in which you are roaming
- cancel all outgoing call bars
PASSWORD
NEW PASSWORD
NEW PASSWORD
After activating, checking the status, cancelling or
changing the password, wait for the acceptance
message to be displayed before pressing
or
to
exit.
ENGLISH
ENGLISH
5
Call Barring
5
5.13
You can choose which method your phone uses to connect
you to a foreign GSM network when operating outside your
home country (roaming). Normally you would select
Automatic mode (see below) but you can choose “Manual”
or “Periodic” and force a search for available networks or
request network reselection. If you attempt to select a
network with which your home network does not have a
roaming agreement “NETWORK NOT ALLOWED” will
appear on display.
Operating Modes
● there is a choice of three operating modes
AUTOMATIC - your phone will search for the home
network first then a network from the preferred list stored
on the SIM, in list order (refer to page 5.16 to edit the list)
and if both these fail, any network which has a roaming
agreement with your home network
MANUAL - if the search for your selected network fails,
the phone will display a list of available networks for you
to choose from
PERIODIC - this is similar to AUTOMATIC mode but is
particularly useful if you are in an area of the home
country where there is more than one network present
e.g. near a border. When the home network is
unavailable the phone will select a foreign network but
will continue to periodically search for the home network.
This ensures that you will be automatically connected to
the home network as soon as possible or to a network
with a higher priority
Network Search
● if you do not want to use the selected network you can
force an immediate search then make a choice from a list
of available networks in your area
(SELECT)
(WAIT)
Preferred Network List
● you can edit the list of preferred operators giving you
control over which network you use when operating in
automatic or periodic mode. To add to the list
(Location)
(SELECT)
(enter)
● you also have the following options
to read the preferred list:
delete networks:
Reselect Network
● if you are roaming and are not satisfied with the selected
network, activate the Reselect feature. This will ensure
that you get connected to another network from the
preferred list or a network with a better coverage
(wait for connection)
ENGLISH
ENGLISH
5
5.14
Network Selection
5
5.15
● if a new network starts to operate after your phone was
produced, its name will not be recognisable. You will still
be able to select the network but it will only be identified
by the country and network codes. To enter the name
into the phone
(Location)
5
COUNTRY CODE
5.16
NETWORK NAME
NETWORK CODE
● you also have the following options
read the new network list:
delete networks:
Call Menu
The call menu features are only available during
conversation and may not be supported by all networks.
ENGLISH
ENGLISH
New Network
Call Hold
● during conversation you may wish to make a second call
(first call held)
NUMBER
● when the second call is connected, you can use the Call
menu to control the two calls
RETRIEVE
END
HOLD
● if the network supports conference calls (two other
parties and yourself) you will have two extra options,
1 or 2 then select from
JOIN
SPLIT
● the Call menu also gives you the facility to enter the main
feature menu during conversation
5
5.17
● if during conversation you hear a soft ringing tone, a
second caller is trying to contact. You will then have the
opportunity to accept the call and use the Call menu
options
(first held,new call answered)
5
● you must activate call waiting before the feature will work
5.18
● the menu also gives you the option to cancel call waiting
and check if it is available on the network you are
currently connected to (STATUS)
Mobile Internet (Wap)
Getting Started
6.1
Important key When using WAP
6.2
Internet Access
6.2
Home
6.2
Bookmarks
6.3
Profiles
6.3
Cache
6.4
T9 Language
6.4
Entering a WAP home page
6.4
Use of the menu key when on-line
6.5
Setting the profiles
Homepage
Address
IP Number
User Name
Password
Connection Type
Security
Bearer
Dial-Up Number
Data Type
Data Speed
Rename
6.5
6.6
6.6
6.6
6.6
6.6
6.6
6.7
6.7
6.7
6.7
6.7
6.7
Outline of Profile in settings
6.8
ENGLISH
ENGLISH
Call Waiting
6
6.1
Your MX-6880 is able to access the Internet. It is however,
provided that your network operator supports this service.
You may also have to pay a subscription for this service.
WAP offers users of mobile phones the possibility to access
Internet information and communication in the same way,
as you know it from a computer. By using the WAP browser
in the phone you can find a lot of useful information as for
example news, sports, weather and traffic information.
Due to the small display size, WAP Internet pages are
designed in a special format called WML. Ordinary Internet
pages in HTML format cannot be displayed. Your Internet
provider or your network operator can inform you of which
services/pages are available in WAP format.
Getting Started
● Your network operator has probably already configured
the settings (profiles) and you can start using the WAP
functionality directly as described in “Internet Access”. If
this is not the case, please contact your network
operator. They will provide you with the necessary
information so you can set up the profiles yourself as
described in “setting the Profiles” on page 6.4
Important keys When Using WAP
●
– open WAP menu
●
– select link or input field. The elements that can be
chosen is showed with dark background when you
are moving up and down
●
or
●
– go back one step in the menu. If
is longpressed the Internet browser will shut down
and the data connection will be shut down
– move up and down on a page
Internet Access
● Press
to open the WAP menu
● Use
to move up and down and to select a
menu point or press the corresponding number
Home
● When HOME is selected, the homepage set as default
in the active profile will open. A profile consists of some
network settings that you only need to enter into your
phone once. When these settings are entered you only
have to switch between the different profiles every time
you want to change the connection. The browser can
handle up to five different profiles, but only one of them
will be active at a time
ENGLISH
ENGLISH
6
Mobile Internet (WAP)
6
6.2
Cache
● It is possible to save app. 50 WAP pages as bookmarks. This will give you a quick access to your
favourite pages
To choose a bookmark
● Your WAP-browser uses cache as a buffer memory to
save WAP pages that you have visited. When you return
to a page the browser will collect information from the
cache instead of from the original server. This saves time
● It is a good idea to empty the cache regularly
ENGLISH
ENGLISH
Bookmarks
(SELECT BOOKMARK)
6
6.3
T9 Language
To edit
(SELECT BOOKMARK)
To add
(TYPE ADDRESS)
To delete
● When you are on-line and want to access the
bookmarks
To choose a bookmark
(SELECT BOOKMARK)
To add a bookmark
● You can use the T9 functionality when entering text in
WAP text input fields. Use this menu to select T9
language
(SELECT T9 LANGUAGE)
● Press the T9 button
to change to ordinary multitap
mode, numeric mode or symbol mode. T9 text input is
described in chapter 7.
Entering a WAP home page
● You can enter a WAP home page in 3 different ways.
● Open the homepage of one of your profiles
(SELECT PROFILE)
(SELECT “ADD”)
● Open a saved bookmark
Profiles
● Profiles is the menu point used for configuring the
profiles. Please refer to “Setting the Profiles”
(SELECT BOOKMARK)
● When you are on-line it is possible to type in an URL
address directly:
(TYPE URL ADDRESS)
6
6.4
6.5
Homepage
● When you are on-line and press
a menu will appear.
This menu is dynamic in the way that the content
changes according to the WAP page that you visit. Some
menu points will therefore only be available on certain
WAP pages. However, some menu points will always be
present no matter what page you visit and these include:
● Enter the homepage that you want to set as default for
the profile. This could for example be the homepage of
your network operator
(TYPE URL ADDRESS)
- Home
opens the homepage set as default in the
active profile
- Bookmarks the list of stored bookmarks
- HTTP://
a URL address can be typed in directly
- Add
stores the present home page as a
bookmark
- Exit
exits the WAP menu
Setting the Profiles
● If no profiles have been set-up in your phone, please
contact your network operator. They will provide you with
the information you need for setting up a profile yourself.
Please follow the steps below:
● Press
(SELECT PROFILE)
When all profiles are empty it does not matter which one
you select
ENGLISH
ENGLISH
6
Use of the menu key when on-line
IP number
● Type the IP number that your network operator has
provided you with. Remember to set full stop between the
numbers
(TYPE IP NUMBER)
User Name
● Type the user name which your network operator has
provided you with
(TYPE USER NAME)
Password
● Type the password which your network operator has
provided you with
(TYPE PASSWORD)
Connection Type
● When a connection is established with a WAP-server
there are different techniques to exchange data between
the phone and the server. You distinguish between two
different connection types. The connection type is
dependent on the network you are calling. Choose
connection type
(SELECT CONNECTION TYPE)
6
6.6
● Some WAP services require that the security functionality
is turned on. If security is turned on all messages from
the phone to the network will be encrypted
(SELECT SECURITY ON)
Bearer
6
6.7
● You can choose either SMS or data connection. The
speed and cost of the WAP service depend on which
type you use. Your network operator can inform you of
price and accessibility.
(SELECT BEARER)
Dial-Up Number
● Type the dial-up phone number which your network
operator has provided you with
(TYPE DIAL-UP NUMBER)
Data Type
● Choose either ISDN(v.110) or analogue (v.32). ISDN is
normally used but in some situations (for example when
the phone is used abroad) it can be necessary to change
the setting to ANALOGUE
(SELECT DATA TYPE)
Data Speed
● The data speed is network dependent. Your SIM card
supports either 9600 baud or 14400 baud
(SELECT DATA SPEED)
Rename
● You can rename your profiles. To change the name
when you are in the edit menu
(TYPE NAME)
Outline of PROFILE in SETTINGS
1. Profile 1-5
1 Default
2 Edit
1 Homepage
1 Address
2 IP Number
3 User name
4 Password
2 Connection Type
1 Temporary
2 Continuously
3 Security
1 on
2 off
4 Bearer
1 SMS
2 Data
5 Dial-Up Number
6 Data Type
1 Analogue
2 ISDN
7 Data Speed
1 9600 BAUD
2 14400 BAUD
3 Rename
ENGLISH
ENGLISH
Security
6
6.8
T9 Text input
7.1
Read this first!
7.1
Getting into T9 Text Input Mode
7.1
The Display Headline
7.2
Typing Words with T9 Text Input
7.3
Selecting Alternate Words
7.5
Deleting Characters
7.5
Space Characters
7.5
Punctuation and Symbols
7.6
Mode Indicators
7.7
State Indicators
7.8
Typing Numbers
7.8
Other Mode Indicators
7.8
T9 Text Input
(optional)
Read this first!
T9 Text Input is an intelligent input system that allows you
to type SMS messages using just one key press per letter.
T9 Text Input matches your key presses to words in its
linguistic database and displays the most commonly used
matching word. As you type, the word in the display may
change. Type to the end of the word before editing! After
typing the word completely, the desired word usually
appears in the display. Alternate word choices appear in
the display, when the down arrow key is pressed one or
more times.
Getting into T9 Text Input Mode
T9 Text Input is available when you are typing an SMS
message. The T9 Text Input icon appears in the top right of
the display when the handset is in T9 mode. If the T9 Text
Input icon is not displayed, press the
key repeatedly
until the T9 Text Input icon appears in the display.
ENGLISH
ENGLISH
7
T9 Text Input (optional)
7
7.1
Mode: This field indicates
the current mode. See the paragraph
about mode indicators.
Info: This field indicates the number of characters left of
the current message (maximum 160 characters). In read
mode this field will indicate the total number of
characters of the received message.
Typing Words with T9 Text Input
Remember!
1. Use just one key press per desired
letter.
ENGLISH
ENGLISH
7
7.2
The Display Headline
7
7.3
2. The displayed word may change as
you type it. Type to the end of the
word before editing.
State: This field indicates the symbols of either shift or caps
lock. See the paragraph about mode indicators.
3. If the displayed word is not the one
you intended, press the down arrow
key to display other matching words.
Notice that the displayed words change as you type the
phrase. Always type to the end of the word before changing
what appears to be a mistake.
When spelling the common English name "Jim", long push
the 5key to both turn on caps and get a capital "J". Notice
that the shift indicator appears in the top left of the display
headline. Long-push the 4key to turn off caps, and get an
Selecting Alternate Words
Many words share identical numerical sequences. For
example, the words "of" and "me" share the numeric
sequence 6 and 3.
T9 Text Input displays words in order of frequency of use in
the language. Since the word "of" is more frequently used in
English than "me", T9 Text Input displays "of" first. You can
look through the other word candidates by using the up and
down arrow keys.
Example:
.displays "of"
.displays "me"
Deleting Characters
Press
to backspace and remove single characters.
However, at the start of a text it will behave as a delete key
deleting from the right. By long-pressing the "C" one word
at a time will be deleted.
Space Characters
Press
to space
ENGLISH
ENGLISH
7
7.4
"i", and press the 6key for "m". Note that the displayed word
changes as you type it. Always type to the end of the word
before you change what appears to be a mistake. The
down arrow key gives you alternative words.
7
7.5
Mode Indicators
Press
key to display the first of a series of pages of
additional symbols. Cycle through the three pages by
pressing the up or down arrow key and select a symbol by
pressing its corresponding number on the keypad, and you
will automatically return to the previous mode.
● T9 Text Input mode, using the
English T9 Text Input system.
You can look through the
other word candidates by
using the up and down arrow
keys
7
7.6
● Spell mode, behaves like a
normal multi-tap system
● Symbol mode containing all
punctuation and symbols
● Numeric mode, allows you to
enter numbers instead of
letters
Press the
key to change the mode.
● Shift state, the next letter
written will be uppercase
● In caps lock all letters will be
in uppercase.
ENGLISH
ENGLISH
Punctuation and Symbols
7
7.7
To capitalize the next letter that you will type, long-push the
key with the letter that you need. Note that the shift
indicator appears in the top of the display. Shift is released
by long-pushing the following letter.
Typing Numbers
7
7.8
Press the
key repeatedly until the Numeric indicator
appears in the display and after entering the numbers on
the keypad, press the
key to return to the test mode.
Other Mode Indicators
Read mode, you can not edit
the text but only read a
received message.
"T9 is patented under the following U.S. Patents:
5,818,437,5,953,541,5,187,480,5,945,926,6,001,554
and additional patents are pending worldwide"
Miscellaneous
Calculator
8.1
Usage of the calculator
8.1
Making a currency conversion
8.1
Games
8.1
Memory
8.2
Casino
8.2
Adventure
8.2
World Time List
8.4
ENGLISH
ENGLISH
State Indicators
8
Calculator
The calculator in your phone adds, subtracts, multiplies,
divides, and converts currency values. This calculator has a
limited accuracy and rounding errors may occur, especially
in long divisions.
Usage of the calculator:
1. Press
2. When ‘0’ is displayed on the screen, enter the first
number in the calculation. To change the sign, press
.
Press
to erase any mistakes.
3. Press
once to add, twice to subtract, three times to
multiply or four times to divide.
4. Enter the second number.
5. Repeat these steps as many times as necessary.
6. For a total, press
Making a currency conversion:
1. Set the appropriate exchange rate
exchange rate
2. Currency conversion
-Go to Currency conversion menu (or Calculator menu)
-Input the amount to be converted
-Using
select IN FOREIGN or IN DOMESTIC
-The converted amount is displayed on the phone
GAMES
If you select GAMES in Main Menu, you can play the
following games.
(GAMES) (select game)
MEMORY
If you select the memory game, you can see several black
squares. Using arrow keys, you select one square at the
first time, and it’ll show picture. Whenever you select
picture, you should press
key.
Next, you select another picture using arrow keys. If two of
pictures were same, they disappeared. When all pictures
are disppeared, you pass the game. You can totally enjoy 6
stages.
CASINO
- Select key
: Start, Spin / Rolling, Continue, Low
: Stop, High
: Betting
First, you have to bet some point using arrow keys, and
then “select spin button”. Turning screen stops and if you
have the Bingo, score is calculated. If you hit HIGH/LOW,
you can get double point of the number of betting.
Otherwise, you get 0 point and have to begin at the
beginning. Score increases like that you win a prize, When
score is zero, game is over.
ADVENTURE
(HELP)
(GO GAME)
ENGLISH
ENGLISH
8
8.1
Miscellaneous
8
8.2
1. catch mole - this game is catching a mole using 1, 3, 5,
7, 9 keys.
If you catch 20, you win success.
If you miss 5 , you fail.
2. one shot
3. flag game
- this game is shooting at a balloon using
one of the 3, 6, 9, right keys.
You have to shooting at each black/white
balloon more than 10.
Otherwise, game is over.
- according to screen, you have to raise a
flag.
For White flag, you should use one of the
1, 4, 7, left keys.
For Black flag, you should press one of
the 3, 6, 9, right keys.
If you hit 20, you win success,
When you do the mistake 5 times, game
is over.
World Time List
You can see the current time of the major cities of the
world. If you select one of them, the local time will be
changed properly. Note that it doesn’t support the daylight
saving time (DST).
ENGLISH
ENGLISH
8
8.3
Adventure game consists of three games and two bonuses.
If you start game, it’ll roll automatically and you can play
selected game.When you get total 20 medals, game is over.
And, you can get a bonus of 500 points in Each game
every perfect success.
Usage of the world time
1. Press - You can see the current local city and the time on the
screen.
2. Change the city with
3. Press
, if you want to change the local time to the time
of the city on the screen.
8
8.4
View Entries
9.1
New Entry
9.2
8
Go To Day/Week and
8.5
Weekly/Monthly
ENGLISH
ENGLISH
Organizer
9
9.3
View To Do List
9.5
Settings
9.6
Limitations of the Organizer
9.6
The Organizer makes it possible for you to keep track of
important meeting or events that you need to do.
You can also let the phone remind you before an
appointment or birthday. In this way, you can be pretty sure
that you don’t miss anything important as like as
appointment, to do and birthday, no matter where you are.
9.1
Functions :
View the calendar and organize your schedule
Define and view a list of things to do
View the schedule of a day, week and month
View Entries
● When you select the organizer menu, you will see today’s
entries at the first.
If you select “VIEW ENTRIES” menu, as the submenu,
you can see “ENTRY LIST ITEM”,
“APPOINTMENT ENTRY” and “BIRTHDAY ENTRY”.
Each submenu has the many functions as follows.
(on time, 5, 10, 15, 30 minutes or choice the
time[custom] or no alarm)
REPEAT FREQUENCY - to show appointment that
you set cycle.
NEW ENTRY - to write new appointment
In the case of “BIRTHDAY ENTRY”,
EDIT TEXT - to edit text
MOVE - to change the date which you set.
DELETE - to delete contents of the entry.
ALARM SETTING - to set the alarm
(same day, 1day, 2day, 3day, 1week or choice the
day[custom] or no alarm)
NEW ENTRY - to write new birthday.
● Whenever each submenu selected, you can see the
each schedule, if you saved some memo.
You can look up the other day’s schedule with pressing
and
keys.
Usage
View Entries : New Entry
In the case of “ENTRY LIST ITEM”,
EDIT TEXT - to edit text
In the case of “APPOINTMENT ENTRY”,
EDIT TEXT - to edit text
MOVE - to change the time which you set.
DELETE - to delete contents of the entry.
ALARM SETTING - to set the alarm
● If you want to save the new schedule, press this “NEW
ENTRY” menu.
It will display the text which records new ‘to do’,
‘appointment’ and ‘birthday’.
Each submenu has the following more and more
functions.
In the case of “NEW APPOINTMENT”,
EDIT TEXT - to edit text
ENGLISH
ENGLISH
9
Organizer
9
9.2
In the case of “NEW BIRTHDAY”,
ENTER NAME - to enter name
DATE - to write the date of birth
YEAR OF BIRTH - to write year of birth
ALARM SETTING - to set alarm
(on same day, 1, 2, 3 days, 1 week or choice the
day[custom] or no alarm)
● You can select each function with pressing
keys.
Usages
Make New Entry : Current date will be shown in brackets, and days with
events will be shown in bold.
The monthly view allows to scroll the calendar month by
month.
If you want to see one special day, you should select the
button.
Usages
Go To Day
:
9
9.4
Go To Week :
View Weekly :
View Monthly :
and
Go To Day/Week and View Weekly/Monthly
● If you select “GO TO DAY” menu and than change the
day, the day will be changed in the calendar.
Also “GO TO WEEK” is the same.
If you select this menu and than change the week, the
week will be changed in the calendar.
Next, “VIEW WEEKLY” and “VIEW MONTHLY”.
The Weekly View allows the user to scroll the calendar
week by week via the scroll buttons.
If you want to see a given day, you should select the
button.
ENGLISH
ENGLISH
9
9.3
TIME - to write the time of appointment
DATE - to write the date of appointment
ALARM SETTING - to set alarm
(on time, 5, 10, 15, 30minute or choice the
time[custom] or no alarm)
JUNE
W
22
23
24
25
26
27
S
27
3
10
17
24
1
JUNE
M
28
4
11
18
25
2
T
29
5
12
19
26
3
W
30
6
13
20
27
4
T
31
7
14
21
28
5
F
1
8
15
22
29
6
S
2
9
16
23
30
7
W S M T
22
23 3 4 5
24 10 11 12
25 17 18 19
26 24 25 26
MAY
W T
6 7
13 14
20 21
27 28
F
1
8
15
22
29
S
2
9
16
23
30
JULY
Settings
● If you select this menu, as the submenu, you can see
“TO DO ENTRY”.
This is used when you write brief memos.
Submenu is divided into two sections. The one is “with
due date”, the other is “with no due date”.
Whenever each submenu selected, you can see the
each text, if you saved some memos.
You can look up the other memo with pressing
and
keys.
Each submenu has the following functions.
In the case of “with due date”,
EDIT TEXT - to edit text
MOVE - to change the time which you set.
DELETE - to delete contents of the entry
ALARM SETTINGS - to set alarm
(1, 2, 6, 12, 24 hours, or choice the
time[custom] or no alarm)
DISABLE DUE DATE - to disable due date
NEW ENTRY - to write new ‘to do’.
In the case of “with no due date”,
EDIT TEXT - to edit text
DELETE - to delete contents of the entry
ENABLE DUE DATE - to enable due date
NEW ENTRY - to write new ‘to do’.
Usages
View To Do List : Settings :
● The organizer requires the following settings :
- Week start [Saturday, Sunday or Monday]
- Auto Delete [As Needed, Every 2 Month, Every 6
Month]
Limitations of the Organizer
● The calendar will handle dates of 1 year for the future.
● Repeated events will only repeated for 1/4 of a year or
as long memory is available.
● Repeated events will occupy more memory space than
a single entry.
ENGLISH
ENGLISH
9
9.5
View to Do List
9
9.6
Troubleshooting
The Phone Will Not Switch ON
● the phone has shut down because the battery power
level is too low to make calls, fully recharge the battery
The Phone Will Not Switch ON
10.1
Some Calls Are Not Processed
10.1
ENGLISH
ENGLISH
Troubleshooting
Some Calls Are Not Processed
10
● a call bar has been set to restrict phone usage, cancel
call barring as necessary
Someone Else is Receiving My Calls 10.1
Someone Else Is Receiving My Calls
Display Messages
10.1
'PLEASE INSERT SIM'
10.1
● the phone has been set to forward (divert) your calls to
another number, cancel call forwarding as necessary
'NO NETWORK'
10.1
Display Messages
'EMERGENCY CALLS ONLY'
10.2
'INVALID SIM'
10.2
● During operation your phone may display an error
message as follows:
'ENTER PUK 1/2'
10.2
“PLEASE INSERT SIM”
● you must insert the SIM before you can use the phone.
If the SIM is already in place, remove and clean the
gold area with a dry cloth then reinsert
“NO NETWORK”
● you are outside network coverage (or there are physical
obstructions between you and a suitable transmitter)
and cannot make or receive calls, if you are inside a
building try moving towards a window
10
10.1
10.2
“INVALID SIM”
● the phone is SIM-locked and will not accept the inserted
SIM. Insert the correct SIM or contact your dealer
“ENTER PUK1/2”
● the SIM is blocked because the wrong PIN1/2 has been
entered three times in succession. You must apply to
your network provider for a special eight digit unblock PIN
known as a PUK (the PUK may be supplied with your
PIN1/2)
● to unblock the SIM press the following (the network
provider may give alternative instructions which will work
with your phone)
EIGHT DIGIT PUK
● you can now enter a new four to eight digit PIN of your
choice
NEW PIN1/2
REPEAT NEW PIN1/2
IMPORTANT: If an incorrect PUK is entered 10 times in
succession, the SIM will be permanently blocked. You
must then apply to your network provider for a new SIM.
Accessories
ENGLISH
ENGLISH
10
“EMERGENCY CALLS ONLY”
● you are outside co-operating network coverage but
another network in your area will allow emergency calls
subject to signal strength
Standard Charger
11.1
Car Charger
11.1
Li-Ion Spare Batteries
11.1
Carry Case
11.2
Car Mount Cradle
11.2
Portable Hands Free with hook/
mute button
11.2
Data/Fax Cable
11.2
11
Standard Charger
● charges a slim battery(AX-841) to its full capacity in 1
hours
● charges a standard battery (AX-840) to its full capacity in
1.5 hours.
● available with four different wall plugs;EU, UK, AUS, US
Car Charger
● charges a slim battery(AX-841) to its full capacity in less
than 2 hours
● charges a standard battery(AX-840) to its full capacity in
2.5 hours
● suitable for both 10.8 Volt and 28 Volt
● ideally combined with a car mount cradle and a head set
Li-lon Spare Batteries
● Slim battery(AX-841) providing 72 hrs standby or up to 5
hrs talk time incl. DTX
● Standard battery(AX-840) providing 155 hrs standby or
up to 8 hrs talk time incl. DTX
The standby and talk time quoted are estimates based on ideal
operating conditions. Battery life achieved in use will vary
between networks and with different conditions and
applications.
Battery may be dead due to outside impact or abnormal use
such as short, over discharging and over charging with Li-ion
battery. It is normal operation comes from protection circuit in
the battery. Battery will be recovered when you connect the
charger to phone.
Carry Case
● elegant case which protects the phone from scratches,
knocks, water stains etc.
Car Mount Cradle
● custom designed passive holder for the phone
● ideally combined with a cigar lighter charger or a head
set
Portable Hands Free with hook/mute button
● allows for Hands Free operation of the phone
● provides you with extra mobility in the office, at home etc
● can be combined with a car mount cradle for Hands Free
conversation in your car
Data/Fax Cable
● Data Interface Cable is available and allows the phone to
be connected directly to a PC.
ENGLISH
ENGLISH
11
11.1
Accessories
11
11.2
Indicator LED
Security
Accessories
Any Key Answer
11.1
3.12
Battery
– Attaching
– Charging
– Performance
– Power level
– Removing
1.1
1.1
1.4
1.4
1.1
Basic Features
– Alarm
– Call Timer
– Data
– Off Timer
– Message T9 Language
– Time
3.12
3.12
3.13
3.13
5.7
3.13
Billng
3.10
Calculator
– Usage
– Currency conversion
Calls
– Answering
– Barring
– Cost
– Emergency
– Forwarding
– Hold
– International
– List
– Menu
8.1
8.1
2.4
5.12
3.10
2.3
5.10
5.17
2.2
2.2
3.3, 5.17
–
–
–
–
–
Missed
National
Phone extension
Redialling
Waiting
2.4
2.1
2.2
3.5
5.18
Cell broadcasts
– Alert
– Channels
– Display
– Language
– On/Off
5.8
5.8
5.8
5.9
5.8
Customising
3.4
Display
– Backlight
– Contrast
1.9
3.7
3.8
Display text
3.4
DTMF tones
3.11
Earpiece volume
3.11
Emergency calls
– Calls
– Number store
2.3
4.6
Feature menu
3.3
Games
– Memory
– Casino
– Adventure
8.2
8.2
8.2
Information tones
Keypad
– Sound
Mobile Internet (WAP)
– Bearer
– Bookmarks
– Cache
– Connection type
– Data type
– Dial-up number
– Home
– Homepage
– Important keys
– Internet access
– Inserting
– PIN1
– PIN2
– Unblocking
– Unlocking
SMS messages
– Alert
– Creating
– Deleting
3.4
–
–
1.11 –
–
3.7 –
–
–
3.7 –
–
6.7
6.3
6.4
6.6
6.7
6.7
6.2
6.6
6.2
6.2
1.6
3.4
3.5
10.2
1.7
5.7
5.5
5.4
Editing
Format
Reading
Receiving
Replaying
Sending
Service center
Template
Validity period
5.5
5.7
5.3
5.3
5.4
5.3
5.6
5.6
5.6
Text message
5.1
Troubleshooting
10.1
T9 Text input
– Deleting characters
– Mode indicators
– Other indicators
– Punctuation and symbols
– Space characters
– State indicators
– Typing numbers
7.5
7.7
7.8
7.6
7.5
7.8
7.8
Vibrating
3.6
Voice mail
3.9
World Time List
8.4
In the event of a product recall the manufacturer will not
be liable for any claims for loss or damage whether
arising directly or indirectly. Your statutory rights are not
affected.
ENGLISH
ENGLISH
Greeting message
Index
">