Bird Service Center
Simple Solutions
Antenna & Cable Testing
Power Measurement
Power Termination
Test Systems
Attenuation
RF Components
Service & Calibration
Electronic Corporation
A Member of Bird® Technologies Group
®
30303 Aurora Road, Cleveland, OH 44139-2794
Tel:1-866-695-4569
Fax: 1-866-546-4306
Email: [email protected]
Website: http://www.bird-electronic.com
Celebrating 60 years of providing solutions to our customers
© 2002 Bird® Electronic Corporation.
871-BEC-147-0302
Wireless Market Solutions
Simple
Solutions...
Wireless Market Solutions
Bird® Service Center
Terminations
Digital Power Meter
Digital Power Meter
(page 7)
Digital Power Meter
(page 7)
Attenuators
Power Dividers
and Couplers
Broadcast
Power Monitor
(page 10)
Site Analyzer®
Series
(pages 5-6)
Digital Air®
Load
(page 11)
Terminating
Power Sensor
(page 9)
Digital Power Meter
(page 7)
Moduload®
(page 29)
®
Site Analyzer Series
Terminations (pages 21-29)
Terminating Power Sensor
VSWR Alarm / Monitor
Directional Power Sensor
Oil Dielectric Load
(pages 23-27)
Attenuators (pages 30-31)
Power Dividers and Couplers
(page 32)
Broadcast Market Solutions
TABLE OF CONTENTS
Laboratory Grade Instruments
Model 4421 Power Meter
4027A & 4020A Power Sensors
Calorimeters
Site Analyzer® Series
Model 5000 RF Digital Power Meter
Model 5010
Thruline® Digital Power Sensor
Model 5011
Terminating Power Sensor
Broadcast Power Monitor
Digital Air® Loads
VSWR Monitor / Alarm
Antenna Testers
Thruline® RF Directional Wattmeters
50-Ohm Cable Systems and 7/8" Line
Portable Wattmeters
Digital RF Signal Wattmeter
Panel-Mount Wattmeters
Wattcher™ RF
Monitoring System
PEP RF Power Analys
Signal Samplers
Field-Strength Element
and Meter
Meter Movements
and 7/8" Line Sections
Termaline® RF Coaxial
Terminations
Tenuline® RF Coaxial Attenuators
Accessories and Connectors
Elements
Broadcast Elements
Technical Information
Bird Service Center
1 5/8" – 6 1/8" Rigid Line Systems
Wattcher® RF
Monitoring System
Rigid Line Sections
Meters for Rigid Line Use
Bird Electronic Corporation maintains an aggressive program of testing products for conformity to applicable electromagnetic
and safety standards, including European EEC directives. We are proud to announce that, where applicable, Bird products carry
the "CE" mark. A CE-marked product complies with relevant EEC directives and is approved for sale to the European Union.
The product validation is done by independent laboratories and is supported by a Declaration of Conformity (DOC).
Wireless Market Solutions
Public Safety Market Solutions
Broadcast Market Solutions
Antenna and Cable Testing,
RF Power Measurement, and
Power Termination Solutions
(pages 5-9, 12-18, 21-34, 37-42)
Public Safety Communication
System Solutions
(pages 5-9, 12-18,
21-34, 37-42)
RF Power Measurement,
RF System Test (Termination),
RF Power Reduction (Attenuation),
and RF Component Solutions
(pages 4-32, 35-42)
Semiconductor Market Solutions
Other Markets
RF Power Etch Solutions
(pages 3, 9, 12, 13-18,
21-34, 37-42)
Government, Rail, Medical,
Industrial, and Other Markets
(pages 5-9, 12-18, 21-34, 37-42)
Bird® Service Center
Services and Calibrates Bird
and Other Popular Name
Brands of Test Equipment.
www.bird-electronic.com 1-866-695-4569 Bird® Electronic Corporation
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
2
Wireless Market Solutions
Broadcast Market Solutions
Simple
Solutions...
Wireless Market Solutions
Bird® Service Center
(page 42)
Terminations (pages 21-29)
Digital Power Meter
Digital Power Meter
(page 7)
Attenuators (pages 30-31)
Digital Power Meter
Power Dividers
and Couplers
(page 32)
Broadcast
Power Monitor
Site Analyzer®
Series
Digital Air®
Load
Digital Power Meter
Terminating
Power Sensor
Moduload®
®
Site Analyzer Series
(pages 5-6)
Terminations
Terminating Power Sensor
(page 9)
VSWR Alarm / Monitor
(page 12)
Directional Power Sensor
(page 8)
Oil Dielectric Load
Attenuators
Power Dividers and Couplers
Broadcast Market Solutions
TABLE OF CONTENTS
Laboratory Grade Instruments
Model 4421 Power Meter ....................3
4027A & 4020A Power Sensors........3-4
Calorimeters ........................................4
Site Analyzer® Series ............................5-6
Model 5000 RF Digital Power Meter ......7
Model 5010
Thruline® Digital Power Sensor ..............8
Model 5011
Terminating Power Sensor ......................9
Broadcast Power Monitor ......................10
Digital Air® Loads ....................................11
VSWR Monitor / Alarm ............................12
Antenna Testers ......................................12
Thruline® RF Directional Wattmeters
50-Ohm Cable Systems and 7/8" Line
Portable Wattmeters ....................13-16
Digital RF Signal Wattmeter ..............15
Panel-Mount Wattmeters ..............15-16
Wattcher™ RF
Monitoring System ............................16
PEP RF Power Analyst........................16
Signal Samplers ................................17
Field-Strength Element
and Meter ..........................................18
Meter Movements
and 7/8" Line Sections ......................18
Termaline® RF Coaxial
Terminations ......................................21-29
Tenuline® RF Coaxial Attenuators ....30-31
Accessories and Connectors............32-39
Elements ............................................33-34
Broadcast Elements ..........................35-36
Technical Information ......................40-41
Bird Service Center ................................42
1 5/8" – 6 1/8" Rigid Line Systems
Wattcher® RF
Monitoring System ............................19
Rigid Line Sections ............................20
Meters for Rigid Line Use ..................20
Bird Electronic Corporation maintains an aggressive program of testing products for conformity to applicable electromagnetic
and safety standards, including European EEC directives. We are proud to announce that, where applicable, Bird products carry
the "CE" mark. A CE-marked product complies with relevant EEC directives and is approved for sale to the European Union.
The product validation is done by independent laboratories and is supported by a Declaration of Conformity (DOC).
1
Bird® Electronic Corporation 1-866-695-4569 www.bird-electronic.com
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
Wireless Market Solutions
Public Safety Market Solutions
Broadcast Market Solutions
Antenna and Cable Testing,
RF Power Measurement, and
Power Termination Solutions
Public Safety Communication
System Solutions
RF Power Measurement,
RF System Test (Termination),
RF Power Reduction (Attenuation),
and RF Component Solutions
Semiconductor Market Solutions
Other Markets
RF Power Etch Solutions
Government, Rail, Medical,
Industrial, and Other Markets
Bird® Service Center
Services and Calibrates Bird
and Other Popular Name
Brands of Test Equipment.
Semiconductor Market Solutions
Semiconductor Market Solutions
Laboratory Grade Instruments
Laboratory Grade Instruments
Semiconductor
BIRD® MODEL 4421
Precision Power Meter For Semiconductor Processing Applications
The Bird® Model 4421 is a precision RF power meter that, while originally
intended for general purpose laboratory applications where high accuracy
is required, has found wide acceptance in semiconductor processing
applications. The product is configured as a system, consisting of the
Model 4421 digital display and a precision power sensor selected
for the application based upon maximum power
and operating frequency.
• +/- 1% Accuracy — Accomplished through the use
of an automatic frequency compensation scheme, where
the error contributions due to directional coupler frequency
response characteristics are eliminated.
• Wide Dynamic Range — The instrument will meet the full
accuracy specification over a 35 dB dynamic range.
• Excellent Measurement Repeatability — Typically <0.1%
• Digital Display — Along with automatic VSWR calculation
• Computer Interface — Choice of RS-232 or IEEE-488
interface through the use of plug-in cards
MODEL 4421 MULTIFUNCTION POWER METER
Power Range 100 mW to 10 kW FS
Frequency Range 100 kHz to 2.5 GHz
VSWR Range 1.0 - 199.9
Functions Forward and reflected power in W or dBm, VSWR,
return loss in dB and min/max values
Overrange Audible warning when RF power input exceeds
120% of sensor's maximum power range
Indication Display 3 1/2 digit-liquid crystal display with indicator
for mode, measurement units, battery condition,
programming status, and trend arrows.
Switchable backlight.
Operating Power 115/230 Vac, 50/60 Hz or 8 nickel cadmium
1.2 V cells (NEDA type 10014)
Nominal Size 12 9/32" L x 12 5/32" W x 4 1/4" H
(312 mm x 309 mm x 108 mm)
with handle extended 15 7/16" L (392 mm)
Weight 11 lbs. (5 kg.)
Interconnects 1 meter latch-n-lock coiled cable
Interfaces Optional field-installable IEEE-488 (PN: 4421-488)
or RS-232 serial interface (PN: 4421-232).
Dimensions: 4 1/2" x 6 1/2" (114x165mm)
Required Product Smart RF Power Sensor below
Accessories Case 4300A215
Model 4421
Semiconductor
MODEL 4421A500 CALIBRATION KIT
Logic Level
Operating Modes
Connector
Operational Temp.
Storage Temp.
Dimensions
Weight
Operating Power
Weight
Cable Length
Required Products
Plug-in Card Module
Meets all IEEE standard 488-1978 specs
(Switch & Bus Selectable) Talk Only: Keyboard
can command meter to output a measurement
to the bus; Addressable: IEEE-488 bus controller
command can give power meter a talker
or listener address
Standard IEEE-488 bus type
0° to 50° C (32° to 122° F)
-20° to +70° C (-4° to 158° F)
6 1/2" L x 4 1/2" W x 1" H
(165 mm x 114 mm x 25 mm)
1/2 lb. (227 g.)
AC operation of 4421 meter
Calibration Key
3 oz. (85 g.)
Approx. 3 ft. (1 m)
4421 power meter, 4020 Series power sensor,
RF power source, RF low-pass filter, RF terminating
power standard (Bird Model 6091 calorimeter
recommended) and IBM compatible computer
fitted with a GPIB card.
4020 SERIES — Power Sensor
Power Input
Frequency Range
Insertion Loss
Accuracy
3
4021
300 mW to 1 kW
(1.2 kW max.)
1.8-32 MHz
<0.05 dB
40022
300 mW to 1 kW
(1.2 kW max.)
25-1000 MHz
—
4024
3 W to 10 kW
(12 kW max.)
1.5-32 MHz
<0.05 dB
4025
3 W to 10 kW
(12 kW max.)
100-2500 kHz
<0.05 dB
±3% of reading from rated max. range down to 30% of full scale on the most sensitive range.
Bird® Electronic Corporation 1-866-695-4569 www.bird-electronic.com
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
4027A SERIES — Power Sensor
4027A12M
4027A250K 4027A400K 4027A800K
4027A2M 4027A4M 4027A10M 4027A25M 4027A35M 4027A60
Power Range 300 mW to 1 k W
3 W to 10 kW
3W to 6kW
Frequency
10-15 MHz
250-400 kHz 400-550 kHz 800-950 kHz 1.5-2.5 MHz 3-5 MHz 10-15 MHz 25-30 MHz 35-45 MHz
45-65 MHz
Accuracy
±2% from maximum range to 30% of full scale on the most sensitive range; ±1% at calibration frequencies and power levels
VSWR Range
1.0 to 2.0
Directivity
28 dB
Insertion Loss
< 0.05 dB
Calibration Power Level
1000 W units: 700 watts. 10 kW units: 1700 watts.
Uniformity
± 1% maximum unit to unit, at calibration frequency and power levels
Speed
2 readings per second.
Maximum Power
12 kW
Connectors
THRULINE QC-Type, N Female normally supplied
Sensor Interface
Latch-n-Lock
External DC
12 Vdc, supplied from Multifunction Power Meter
Dimensions
5 7/32" L x 2 1/2" W x 3 1/4" H
Weight
1 lb. 11 oz. (0.76 kg)
Operating Temperature
0° to 50° C (32° to 122°F)
Storage Temperature
-40° to 80° C (-40° to 176°F
Calibration Cycle
1 year. Performance before and performance after data to be supplied for units.
MODEL 6091 — Self-Contained Calorimeter
Power Range 10 W - 200 W
(average power independent of wave shape)
Frequency Range Broadband; low-reflection load remains precisely
matched from DC to 2.5 GHz
Input VSWR DC to 1 GHz: 1.10 max (26.4 dB min. return loss).
1 to 2.5 GHz: 1.25 max. (19.18 dB min. return loss).
Accuracy 10 W - 25 W: ± 3% of reading.
25 W - 200 W: ± 1.25% of reading.
Display/Functions Large 4 digit, 7-segment LED displays RF power
directly in W. The rise in coolant temperature (∆T)
is displayed in °C.
Coolant flow rate is displayed in liters/minute.
Calibration Precalibrated to precision power standard at factory,
with data stored in nonvolatile memory
Response Time 1 minute max. to reach 97% of final reading
Sampling Rate 1 reading/second
Remote Operation General Purpose Interface Bus cable supplied,
for connecting the 6091 to a GPIB controller.
All front panel features are available through the bus.
GPIB Functions SH1, AH1, T6, L4, SR1, RL1, PP0, DC1, DT1, C0, E1, TE0,
and LE0. (IEEE 488 1978)
EMI EMI compliance per FCC part 15J, Class A.
Coolant 10 oz. (525 ml.) water-based coolant
(65% water + 35% ethylene glycol)
Load Specially designed 50-ohm precision
load resistor assembly
Input Connector Female Type N
Nominal Input 50 ohms
Impedance
Power 104 to 132 Vac / 195 to 264 Vac, 47-63 Hz
(single phase)
Power Consumption 45-70 W
Operating Temperature 59° to 95° F (15° to 35° C)
Storage Temperature 50° to 122° F (10° to 50° C)
Nominal Size (includes connector end drain) 16 1/2" L x 20 15/32" W
x 8 7/16" H (419 mm x 520 mm x 210 mm)
Weight 40 lbs. (18 kg.)
Accessories 6 1/2 ft. (2 meter) GPIB cable, AC power cord
MODEL 6085 — High-Power Calorimeter
Power/Frequency Function of RF load, flow rate,
Range temperature and coolant
Accuracy ± 3% of reading
Circuitry Microprocessor based operation
with digital display
Display/Functions 3 1/2 digit LCD displays power
in W or dBm, (∆T) in °C,
flow in liters/minute, min., max., back light
Over-Range Protection N/O and N/C interlock on sensor
Ambient Temp. 5°C to 35°C
Cable Length 5 m standard
Water Flow 4 to 72 liters/min.
(actual range determined by RF load)
Stabilization Time 5 minutes typical
Coolant Water/glycol
AC Power 115/230 VAC, 50/60 Hz
Nominal Size Meter: 12 9/32" L x 12 5/32" W x 4 1/4" H
(312 mm x 309 mm x 108 mm),
Power Sensor:
9 27/32" L x 10 3/32" W x 5 3/64" H
(250 mm x 256 mm x 128 mm)
Weight RF Power Meter: 9 lbs. (4 kg),
RF Power Sensor: 7lbs (3.2 kg)
Required Product ECONOLOAD® Load Resistor on pages,
or other water cooled external load
www.bird-electronic.com 1-866-695-4569 Bird® Electronic Corporation
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
4
Semiconductor Market Solutions
Semiconductor Market Solutions
Laboratory Grade Instruments
Laboratory Grade Instruments
Semiconductor
BIRD® MODEL 4421
Precision Power Meter For Semiconductor Processing Applications
The Bird® Model 4421 is a precision RF power meter that, while originally
intended for general purpose laboratory applications where high accuracy
is required, has found wide acceptance in semiconductor processing
applications. The product is configured as a system, consisting of the
Model 4421 digital display and a precision power sensor selected
for the application based upon maximum power
and operating frequency.
• +/- 1% Accuracy — Accomplished through the use
of an automatic frequency compensation scheme, where
the error contributions due to directional coupler frequency
response characteristics are eliminated.
• Wide Dynamic Range — The instrument will meet the full
accuracy specification over a 35 dB dynamic range.
• Excellent Measurement Repeatability — Typically <0.1%
• Digital Display — Along with automatic VSWR calculation
• Computer Interface — Choice of RS-232 or IEEE-488
interface through the use of plug-in cards
MODEL 4421 MULTIFUNCTION POWER METER
Power Range 100 mW to 10 kW FS
Frequency Range 100 kHz to 2.5 GHz
VSWR Range 1.0 - 199.9
Functions Forward and reflected power in W or dBm, VSWR,
return loss in dB and min/max values
Overrange Audible warning when RF power input exceeds
120% of sensor's maximum power range
Indication Display 3 1/2 digit-liquid crystal display with indicator
for mode, measurement units, battery condition,
programming status, and trend arrows.
Switchable backlight.
Operating Power 115/230 Vac, 50/60 Hz or 8 nickel cadmium
1.2 V cells (NEDA type 10014)
Nominal Size 12 9/32" L x 12 5/32" W x 4 1/4" H
(312 mm x 309 mm x 108 mm)
with handle extended 15 7/16" L (392 mm)
Weight 11 lbs. (5 kg.)
Interconnects 1 meter latch-n-lock coiled cable
Interfaces Optional field-installable IEEE-488 (PN: 4421-488)
or RS-232 serial interface (PN: 4421-232).
Dimensions: 4 1/2" x 6 1/2" (114x165mm)
Required Product Smart RF Power Sensor below
Accessories Case 4300A215
Model 4421
Semiconductor
MODEL 4421A500 CALIBRATION KIT
Logic Level
Operating Modes
Connector
Operational Temp.
Storage Temp.
Dimensions
Weight
Operating Power
Weight
Cable Length
Required Products
Plug-in Card Module
Meets all IEEE standard 488-1978 specs
(Switch & Bus Selectable) Talk Only: Keyboard
can command meter to output a measurement
to the bus; Addressable: IEEE-488 bus controller
command can give power meter a talker
or listener address
Standard IEEE-488 bus type
0° to 50° C (32° to 122° F)
-20° to +70° C (-4° to 158° F)
6 1/2" L x 4 1/2" W x 1" H
(165 mm x 114 mm x 25 mm)
1/2 lb. (227 g.)
AC operation of 4421 meter
Calibration Key
3 oz. (85 g.)
Approx. 3 ft. (1 m)
4421 power meter, 4020 Series power sensor,
RF power source, RF low-pass filter, RF terminating
power standard (Bird Model 6091 calorimeter
recommended) and IBM compatible computer
fitted with a GPIB card.
4020 SERIES — Power Sensor
Power Input
Frequency Range
Insertion Loss
Accuracy
3
4021
300 mW to 1 kW
(1.2 kW max.)
1.8-32 MHz
<0.05 dB
40022
300 mW to 1 kW
(1.2 kW max.)
25-1000 MHz
—
4024
3 W to 10 kW
(12 kW max.)
1.5-32 MHz
<0.05 dB
4025
3 W to 10 kW
(12 kW max.)
100-2500 kHz
<0.05 dB
±3% of reading from rated max. range down to 30% of full scale on the most sensitive range.
Bird® Electronic Corporation 1-866-695-4569 www.bird-electronic.com
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
4027A SERIES — Power Sensor
4027A12M
4027A250K 4027A400K 4027A800K
4027A2M 4027A4M 4027A10M 4027A25M 4027A35M 4027A60
Power Range 300 mW to 1 k W
3 W to 10 kW
3W to 6kW
Frequency
10-15 MHz
250-400 kHz 400-550 kHz 800-950 kHz 1.5-2.5 MHz 3-5 MHz 10-15 MHz 25-30 MHz 35-45 MHz
45-65 MHz
Accuracy
±2% from maximum range to 30% of full scale on the most sensitive range; ±1% at calibration frequencies and power levels
VSWR Range
1.0 to 2.0
Directivity
28 dB
Insertion Loss
< 0.05 dB
Calibration Power Level
1000 W units: 700 watts. 10 kW units: 1700 watts.
Uniformity
± 1% maximum unit to unit, at calibration frequency and power levels
Speed
2 readings per second.
Maximum Power
12 kW
Connectors
THRULINE QC-Type, N Female normally supplied
Sensor Interface
Latch-n-Lock
External DC
12 Vdc, supplied from Multifunction Power Meter
Dimensions
5 7/32" L x 2 1/2" W x 3 1/4" H
Weight
1 lb. 11 oz. (0.76 kg)
Operating Temperature
0° to 50° C (32° to 122°F)
Storage Temperature
-40° to 80° C (-40° to 176°F
Calibration Cycle
1 year. Performance before and performance after data to be supplied for units.
MODEL 6091 — Self-Contained Calorimeter
Power Range 10 W - 200 W
(average power independent of wave shape)
Frequency Range Broadband; low-reflection load remains precisely
matched from DC to 2.5 GHz
Input VSWR DC to 1 GHz: 1.10 max (26.4 dB min. return loss).
1 to 2.5 GHz: 1.25 max. (19.18 dB min. return loss).
Accuracy 10 W - 25 W: ± 3% of reading.
25 W - 200 W: ± 1.25% of reading.
Display/Functions Large 4 digit, 7-segment LED displays RF power
directly in W. The rise in coolant temperature (∆T)
is displayed in °C.
Coolant flow rate is displayed in liters/minute.
Calibration Precalibrated to precision power standard at factory,
with data stored in nonvolatile memory
Response Time 1 minute max. to reach 97% of final reading
Sampling Rate 1 reading/second
Remote Operation General Purpose Interface Bus cable supplied,
for connecting the 6091 to a GPIB controller.
All front panel features are available through the bus.
GPIB Functions SH1, AH1, T6, L4, SR1, RL1, PP0, DC1, DT1, C0, E1, TE0,
and LE0. (IEEE 488 1978)
EMI EMI compliance per FCC part 15J, Class A.
Coolant 10 oz. (525 ml.) water-based coolant
(65% water + 35% ethylene glycol)
Load Specially designed 50-ohm precision
load resistor assembly
Input Connector Female Type N
Nominal Input 50 ohms
Impedance
Power 104 to 132 Vac / 195 to 264 Vac, 47-63 Hz
(single phase)
Power Consumption 45-70 W
Operating Temperature 59° to 95° F (15° to 35° C)
Storage Temperature 50° to 122° F (10° to 50° C)
Nominal Size (includes connector end drain) 16 1/2" L x 20 15/32" W
x 8 7/16" H (419 mm x 520 mm x 210 mm)
Weight 40 lbs. (18 kg.)
Accessories 6 1/2 ft. (2 meter) GPIB cable, AC power cord
MODEL 6085 — High-Power Calorimeter
Power/Frequency Function of RF load, flow rate,
Range temperature and coolant
Accuracy ± 3% of reading
Circuitry Microprocessor based operation
with digital display
Display/Functions 3 1/2 digit LCD displays power
in W or dBm, (∆T) in °C,
flow in liters/minute, min., max., back light
Over-Range Protection N/O and N/C interlock on sensor
Ambient Temp. 5°C to 35°C
Cable Length 5 m standard
Water Flow 4 to 72 liters/min.
(actual range determined by RF load)
Stabilization Time 5 minutes typical
Coolant Water/glycol
AC Power 115/230 VAC, 50/60 Hz
Nominal Size Meter: 12 9/32" L x 12 5/32" W x 4 1/4" H
(312 mm x 309 mm x 108 mm),
Power Sensor:
9 27/32" L x 10 3/32" W x 5 3/64" H
(250 mm x 256 mm x 128 mm)
Weight RF Power Meter: 9 lbs. (4 kg),
RF Power Sensor: 7lbs (3.2 kg)
Required Product ECONOLOAD® Load Resistor on pages,
or other water cooled external load
www.bird-electronic.com 1-866-695-4569 Bird® Electronic Corporation
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
4
Site Analyzer®
Site Analyzer®
Model SA-4000 & Model-SA 2500A
Model SA-4000 & Model SA-2500A
Site Analyzer®
SITE ANALYZER
®
MODEL SA-4000 (25 to 4000) MHz & MODEL SA-2500A (780 to 2500 MHz)
Easy-To-Use Cable & Antenna Tester with Digital Power Meter Option
Bird’s Site Analyzer® is the user-friendly test solution for installing, maintaining, and troubleshooting your antenna and cable
systems. Field engineers and technicians rely on this rugged handheld tool to get the job done. Wireless equipment
manufacturers, service providers, and contractors worldwide approve of the analyzer’s precision VSWR and Return Loss
results. This versatile unit also includes a Digital Power Meter option to accurately measure the output power
of your base station.
Model SA-4000
Site Analyzer ®
Model 5010
Directional
Power Sensor
Model 5011
Terminating
Power Sensor
Model SA-2500A
Site Analyzer ®
SITE ANALYZER® Features and Benefits
• Easy to operate and field ready for first-time,
occasional and experienced users
• Expanded frequency range of the new Model SA-4000
is 25 to 4000 MHz, the Model SA-2500A is also
available for 780 to 2500 MHz applications
• Worldwide systems include Cellular and PCS/DCS with
CDMA, GSM, TDMA or AMPS modulation schemes
• Other applications include 3G, Broadcast, Government,
Microwave, Paging, Public Safety, Trunking,
WLAN and WLL
• Match or Sweep test displays VSWR or Return Loss of
the antenna and cable system over the frequency
range of interest
• Fault Location or DTF mode indicates VSWR or Return
Loss levels at each point along the cable and
antenna system length
• Cable Loss function measures insertion loss of
the cable system over a given frequency range
• Digital Power Meter option allows base station to
transmit power readings with the use of a Model 5010
Directional or Model 5011 Terminating Power Sensor
• Accurate and repeatable measurement results
in all test modes
• Storage capacity of 300 saved traces and
15 calibrated setups
• Flexible alphanumeric labeling allows 50 characters
per trace and also includes quick-text and edit functions
• Industry leading immunity to on-frequency
interference for testing at co-located antenna sites
• Color display with bright back lighting for easy
viewing under all conditions
• Fast sweep rate minimizes system downtime requirements
• Operates in temperatures as low as 14°F (-10°C)
• Unlimited trace overlays per report to compare
antennas and track performance over time
• Flash feature allows easy firmware upgrades
in the field via the internet
Site Analyzer®
SPECIFICATIONS
Site Analyzer®
Model SA-4000 (25 to 4000 MHz)
Model SA-2500A (780 to 2500 MHz)
FREQUENCY CHARACTERISTICS
SA-4000
Frequency Range: 25 - 4000 MHz
Frequency Resolution: 25 kHz from 25-800 MHz
50 kHz from 800-2500 MHz
100 kHz from 2500-4000 MHz
SA-2500A
Frequency Range
Frequency Resolution
STANDARD ACCESSORIES
The Site Analyzer® includes Carrying Case, Instruction Manual,
Serial Cable, PC Tool Software for Windows, AC Power Supply
and Automotive Power Adapter.
780 - 2500 MHz
50 kHz
Standard
Accessories
MEASUREMENT CHARACTERISTICS
Return Loss 0 to -60 dB
Test Port N-type female connector
Impedance 50
Speed 1 multi-frequency scan/4 seconds
Trace Resolution 238 data points
Immunity to
Interfering Signals
Maximum Input Signal
PERIPHERAL PORTS
Data transfer
Rejects on-frequency
signals up to +13 dBm.
+22 dBm
Calibration
Combos
9-pin RS-232 (DB9),
compatible with PC serial port.
POWER
Internal
External DC
External AC
ENVIRONMENTAL
Operating Temperature
Storage Temperature
Humidity
Altitude
FORM FACTOR
Dimensions
Weight
Rechargeable Li-Ion batteries.
3 hour minimum operating time.
Auto shut-off conserves battery life.
9 to 16 Vdc, fused
90 to 264 Vac @ 45-66 Hz
-10° to 50° C (14° to 122° F)
-40° to 80° C (-40° to 176° F)
95% ±5% max., (non-condensing)
Up to 15,000 feet (4572 m)
10.5" x 8.5" x 3.2"
(267 mm x 216 mm x 81 mm)
5 lbs. (2 kg)
OPTIONAL ACCESSORIES
Model
CAL-MN-B
CAL-FN-B
CAL-ME-B
CAL-FE-B
5011
5010
TC-MNMN-1.5
TC-MNMN-3.0
TC-MNFN-1.5
TC-MNFN-3.0
TC-MNFE-1.5
TC-MNFE-3.0
PA-MNME
PA-FNME
PA-MNFE
PA-FNFE
7002A870
SA-BATPAK
Description
Calibration combo, (M) N
Calibration combo, (F) N
Calibration combo, (M) 7/16 DIN
Calibration combo, (F) 7/16 DIN
Terminating Power Sensor
Directional Power Sensor
Test cable, 1.5 m., N (M) conn.
Test cable, 3 m., N (M) conn.
Test cable, 1.5 m., N (M)/N (F) conn.
Test cable, 3 m., N (M)/N (F) conn.
Test cable, 1.5 m., N (M)/7/16 DIN (F) conn.
Test cable, 3 m., N (M)/7/16 DIN (F) conn.
Adapter, N (M) to 7/16 DIN (M).
Adapter, N (F) to 7/16 DIN (M).
Adapter, N (M) to 7/16 DIN (F).
Adapter, N (F) to 7/16 DIN (F).
Hard shell transit case.
External battery pack.
Digital Power Meter Option
Model 5010
Directional Power Sensor
DIRECTIONAL POWER SENSOR (MODEL 5010) (See page 8)
The Model 5010 provides customers a TOTAL RF POWER MEASUREMENT SOLUTION
for Thruline (In-line) Power Measurements with Accuracy of ±5% of readings.
NEW TERMINATING POWER SENSOR (MODEL 5011) (See page 9)
The Model 5011 provides customers a TOTAL RF POWER MEASUREMENT SOLUTION
to measure Base Station Power and/or Broadcast Transmitter Power with Accuracy
of ±5% of readings.
Digital Power Meter Option
Digital Power Meter option allows accurate power readings for digital or analog
systems including those with CDMA, GSM, TDMA or AMPS modulation
Compatible with the Model 5010 Directional Power Sensor to display forward and reflected
power as well as VSWR and Return Loss, DPM elements range from 2 to 2700 MHz
Model 5011
Terminating Power Sensor
Also compatible with the Model 5011 Terminating Power Sensor
to measure power directly or via a coupled test port from 40 to 4000 MHz
5
Bird® Electronic Corporation 1-866-695-4569 www.bird-electronic.com
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
www.bird-electronic.com 1-866-695-4569 Bird® Electronic Corporation
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
6
Site Analyzer®
Site Analyzer®
Model SA-4000 & Model-SA 2500A
Model SA-4000 & Model SA-2500A
Site Analyzer®
SITE ANALYZER
®
MODEL SA-4000 (25 to 4000) MHz & MODEL SA-2500A (780 to 2500 MHz)
Easy-To-Use Cable & Antenna Tester with Digital Power Meter Option
Bird’s Site Analyzer® is the user-friendly test solution for installing, maintaining, and troubleshooting your antenna and cable
systems. Field engineers and technicians rely on this rugged handheld tool to get the job done. Wireless equipment
manufacturers, service providers, and contractors worldwide approve of the analyzer’s precision VSWR and Return Loss
results. This versatile unit also includes a Digital Power Meter option to accurately measure the output power
of your base station.
Model SA-4000
Site Analyzer ®
Model 5010
Directional
Power Sensor
Model 5011
Terminating
Power Sensor
Model SA-2500A
Site Analyzer ®
SITE ANALYZER® Features and Benefits
• Easy to operate and field ready for first-time,
occasional and experienced users
• Expanded frequency range of the new Model SA-4000
is 25 to 4000 MHz, the Model SA-2500A is also
available for 780 to 2500 MHz applications
• Worldwide systems include Cellular and PCS/DCS with
CDMA, GSM, TDMA or AMPS modulation schemes
• Other applications include 3G, Broadcast, Government,
Microwave, Paging, Public Safety, Trunking,
WLAN and WLL
• Match or Sweep test displays VSWR or Return Loss of
the antenna and cable system over the frequency
range of interest
• Fault Location or DTF mode indicates VSWR or Return
Loss levels at each point along the cable and
antenna system length
• Cable Loss function measures insertion loss of
the cable system over a given frequency range
• Digital Power Meter option allows base station to
transmit power readings with the use of a Model 5010
Directional or Model 5011 Terminating Power Sensor
• Accurate and repeatable measurement results
in all test modes
• Storage capacity of 300 saved traces and
15 calibrated setups
• Flexible alphanumeric labeling allows 50 characters
per trace and also includes quick-text and edit functions
• Industry leading immunity to on-frequency
interference for testing at co-located antenna sites
• Color display with bright back lighting for easy
viewing under all conditions
• Fast sweep rate minimizes system downtime requirements
• Operates in temperatures as low as 14°F (-10°C)
• Unlimited trace overlays per report to compare
antennas and track performance over time
• Flash feature allows easy firmware upgrades
in the field via the internet
Site Analyzer®
SPECIFICATIONS
Site Analyzer®
Model SA-4000 (25 to 4000 MHz)
Model SA-2500A (780 to 2500 MHz)
FREQUENCY CHARACTERISTICS
SA-4000
Frequency Range: 25 - 4000 MHz
Frequency Resolution: 25 kHz from 25-800 MHz
50 kHz from 800-2500 MHz
100 kHz from 2500-4000 MHz
SA-2500A
Frequency Range
Frequency Resolution
STANDARD ACCESSORIES
The Site Analyzer® includes Carrying Case, Instruction Manual,
Serial Cable, PC Tool Software for Windows, AC Power Supply
and Automotive Power Adapter.
780 - 2500 MHz
50 kHz
Standard
Accessories
MEASUREMENT CHARACTERISTICS
Return Loss 0 to -60 dB
Test Port N-type female connector
Impedance 50
Speed 1 multi-frequency scan/4 seconds
Trace Resolution 238 data points
Immunity to
Interfering Signals
Maximum Input Signal
PERIPHERAL PORTS
Data transfer
Rejects on-frequency
signals up to +13 dBm.
+22 dBm
Calibration
Combos
9-pin RS-232 (DB9),
compatible with PC serial port.
POWER
Internal
External DC
External AC
ENVIRONMENTAL
Operating Temperature
Storage Temperature
Humidity
Altitude
FORM FACTOR
Dimensions
Weight
Rechargeable Li-Ion batteries.
3 hour minimum operating time.
Auto shut-off conserves battery life.
9 to 16 Vdc, fused
90 to 264 Vac @ 45-66 Hz
-10° to 50° C (14° to 122° F)
-40° to 80° C (-40° to 176° F)
95% ±5% max., (non-condensing)
Up to 15,000 feet (4572 m)
10.5" x 8.5" x 3.2"
(267 mm x 216 mm x 81 mm)
5 lbs. (2 kg)
OPTIONAL ACCESSORIES
Model
CAL-MN-B
CAL-FN-B
CAL-ME-B
CAL-FE-B
5011
5010
TC-MNMN-1.5
TC-MNMN-3.0
TC-MNFN-1.5
TC-MNFN-3.0
TC-MNFE-1.5
TC-MNFE-3.0
PA-MNME
PA-FNME
PA-MNFE
PA-FNFE
7002A870
SA-BATPAK
Description
Calibration combo, (M) N
Calibration combo, (F) N
Calibration combo, (M) 7/16 DIN
Calibration combo, (F) 7/16 DIN
Terminating Power Sensor
Directional Power Sensor
Test cable, 1.5 m., N (M) conn.
Test cable, 3 m., N (M) conn.
Test cable, 1.5 m., N (M)/N (F) conn.
Test cable, 3 m., N (M)/N (F) conn.
Test cable, 1.5 m., N (M)/7/16 DIN (F) conn.
Test cable, 3 m., N (M)/7/16 DIN (F) conn.
Adapter, N (M) to 7/16 DIN (M).
Adapter, N (F) to 7/16 DIN (M).
Adapter, N (M) to 7/16 DIN (F).
Adapter, N (F) to 7/16 DIN (F).
Hard shell transit case.
External battery pack.
Digital Power Meter Option
Model 5010
Directional Power Sensor
DIRECTIONAL POWER SENSOR (MODEL 5010) (See page 8)
The Model 5010 provides customers a TOTAL RF POWER MEASUREMENT SOLUTION
for Thruline (In-line) Power Measurements with Accuracy of ±5% of readings.
NEW TERMINATING POWER SENSOR (MODEL 5011) (See page 9)
The Model 5011 provides customers a TOTAL RF POWER MEASUREMENT SOLUTION
to measure Base Station Power and/or Broadcast Transmitter Power with Accuracy
of ±5% of readings.
Digital Power Meter Option
Digital Power Meter option allows accurate power readings for digital or analog
systems including those with CDMA, GSM, TDMA or AMPS modulation
Compatible with the Model 5010 Directional Power Sensor to display forward and reflected
power as well as VSWR and Return Loss, DPM elements range from 2 to 2700 MHz
Model 5011
Terminating Power Sensor
Also compatible with the Model 5011 Terminating Power Sensor
to measure power directly or via a coupled test port from 40 to 4000 MHz
5
Bird® Electronic Corporation 1-866-695-4569 www.bird-electronic.com
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
www.bird-electronic.com 1-866-695-4569 Bird® Electronic Corporation
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
6
RF Digital Power Meter
Thruline® Directional Power Sensor
Model 5000
Model 5010 & Elements
Thruline® Digital
Power Sensor
RF Digital Power
Meter
BIRD® MODEL 5000 RF Digital Power Meter —
MODEL 5010 Dual-Socket Thruline® Directional Power Sensor
Requires Bird MODEL 5010 or MODEL 5011 Sensor
Bird’s Most Sophisticated Thruline® Sensor System is the Heart of the MODEL 5000
(Requires Bird® MODEL 5000, SA-4000, or SA-2500A)
The “NEW” Industry Standard Hand-Held RF Power Meter
Easy-To-Operate & Field Ready
Versatility to Handle Any Job
The Model 5000 must be coupled with Model 5010
Thruline Power Sensor or a Model 5011 Terminating
Power Sensor. Model 5000 handles Cellular, PCS, AMPS,
CDMA, GSM, TDMA, ISM, UMTS, 3G Wireless, WLL, Paging,
Conventional/Trunked Radio, Aviation, Military, and
Analog or Digital Audio and Television Broadcast.
Readings Any Way You Need Them
The highly-visible, back-lit LCD screen displays power
readings in digital format, while a 20-segment analog
bar graph tracks measurements as well. Compatible with
the Model 5010 Directional Power Sensor to display
forward and reflected power as well as VSWR and
Return Loss. Also compatible with the Model 5011
Terminating Power Sensor to measure power directly or
via a coupled test port. This portable and rugged unit also
provides 100 hours of battery life per charge.
Serial connector to sensor
facilitates hand-held
operation and remote
sensing
Serial connector for
operation with a personal
computer and Bird PC
Tool software
Back-lit, high-contrast LCD
Speed Keys
Easy-to-use, calculator-like
interface
Compact ergonomic case
DPM-xx
Measurement Mode
Sensor Interface
PC Interface
Dimensions
Weight
Power Supply
Battery Life
Operating Temp.
Storage Temp.
Humidity
Standard
The Model 5010 Power Sensor is compatible with many existing Bird accessories for 7/8" line,
including signal samplers, and over 20 types of QC connectors. QC Connectors can rapidly and
conveniently be changed in the field by removing four screws from the connector.
SPECIFICATIONS
Sensor Type
*DPM Element Guide
Model
5010
5011
Back-lit liquid crystal technology, 2.25" x 3.0"
(57 x 76 mm). Three-way display consisting
of major and minor digital display elements,
analog bar graph element, annunciators, battery
indicator and speed-key legends.
TRUE AVERAGE POWER, for measurement
of conventional or digitally-modulated RF.
9-pin D-shell RS-232 serial connector. Sensor is
powered from meter. Sensor is compatible with Bird
VSWR Alarm products and Broadcast Power Monitor
(BPM) product family.
9-pin RS-232 serial port for connection to a PC.
8.0" H x 4.63" W x 1.75" D (203 x 117.6 x 44.5 mm)
1.5 lbs., nominal (0.68 kg)
Rechargeable Nickel-Metal Hydride (NiMH) battery.
Meter may be operated from AC mains
using supplied adapter.
100 hours, minimum, per charge.
-10° to +50° C
-40° to +75° C
95% max. (non-condensing)
Instruction manual, serial communications
cable (5010), AC charger/adapter
Model 5010
Thruline® Directional
Power Sensor
Model 5000
RF Digital Power Meter
OPTIONAL ACCESSORIES
Display
The Model 5010 Dual-Socket THRULINE® Power Sensor
is a precision 50-ohm 7/8-inch “Smart” Line Section which accepts
Bird digital-ready Plug-in Elements. The Model 5010 Sensor provides true
average power readings for digital as well as traditional analog RF systems.
Internal rechargeable
Nickel-Metal Hydride
batteries
*DPM elements are available.
SPECIFICATIONS
• Dual-element THRULINE® design for simultaneous
forward and reflected power readings.
• Measures true average power.
• ±5% of reading accuracy rivals thermal
wattmeters in actual field use.
Small,
easily-remoted sensor facilitates
•
convenient hand-held operation.
5A2238-8
5000-030
5000-035
Description
Directional Power Sensor (DPS) (See page 8)
Requires pair of DPM Elements
DPM Elements, 2 MHz to 2.7 GHz
(See Element guide page 8)
Terminating Power Sensor (TPS), (See page 9)
40 MHz to 4 GHz
Cigarette Lighter Adapter
Soft Carrying Case
Hard Carrying Case
Frequency
Range
Forward
Power Range
Reflected
Power Range
Forward
Element
Reflected
Element
Frequency Range
2 to 30 MHz
1.25 W to 50 W
12.5 W to 500 W
1.25 W to 50 W
12.5 W to 500 W
1.25 W to 50 W
12.5 W to 500 W
25 W to 1 kW
1.25 W to 50 W
12.5 W to 500 W
62.5 W to 2.5 kW
125 mW to 5W
1.25 W to 50 W
12.5 W to 500 W
125 mW to 5W
1.25 W to 50 W
2.5 W to 100 W
12.5 W to 500 W
25 W to 1 kW
125 mW to 5W
1.25 W to 50 W
125 mW to 5W
1.25 W to 50 W
125 mW to 5W
1.25 W to 50 W
1.25 W to 50 W
125 mW to 5W
125 mW to 5W
625 mW to 25 W
125 mW to 5W
125 mW to 5W
125 mW to 5W
1.25 W to 50 W
125 mW to 5W
1.25 W to 50 W
125 mW to 5W
1.25 W to 50 W
2.5 W to 100 W
125 mW to 5W
1.25 W to 50 W
6.25 W to 250 W
12.5 mW to 500 mW
125 mW to 5W
1.25 W to 50 W
12.5 mW to 500 mW
125 mW to 5W
250 mW to 10 W
1.25 W to 50 W
2.5 W to 100 W
12.5 mW to 500 mW
125 mW to 5W
12.5 mW to 500 mW
125 mW to 5W
12.5 mW to 500 mW
125 mW to 5W
125 mW to 5W
12.5 mW to 500 mW
12.5 mW to 500 mW
62.5 mW to 2.5 W
12.5 mW to 500 mW
12.5 mW to 500 mW
DPM-50H
DPM-500H
DPM-50A
DPM-500A
DPM-50B
DPM-500B
DPM-1000B
DPM-50C
DPM-500C
DPM-2500C
DPM-5D
DPM-50D
DPM-500D
DPM-5E
DPM-50E
DPM-100E
DPM-500E
DPM-1000E
DPM-5J
DPM-50J
DPM-5K
DPM-50K
DPM-5L1
DPM-50L1
DPM-50L2
DPM-5L2
DPM-5M
DPM-25M
DPM-5N
DPM-5R
DPM-5H
DPM-50H
DPM-5A
DPM-50A
DPM-5B
DPM-50B
DPM-100B
DPM-5C
DPM-50C
DPM-250C
DPM-.5D
DPM-5D
DPM-50D
DPM-.5E
DPM-5E
DPM-10E
DPM-50E
DPM-100E
DPM-.5J
DPM-5J
DPM-.5K
DPM-5K
DPM-.5L1
DPM-5L1
DPM-5L2
DPM-.5L2
DPM-.5M
DPM-2.5M
DPM-.5N
DPM-.5R
Power Range
25 to 60 MHz
50 to 125 MHz
100 to 250 MHz
200 to 500 MHz
Model 5010
Directional Power Sensor
400 to 960 MHz
950 to 1260 MHz
1100 to 1800 MHz
Model 5011
Terminating Power Sensor
1700 to 1990 MHz
Digital Power Meter Option
1990 to 2200 MHz
DIRECTIONAL POWER SENSOR (MODEL 5010) (See page 8)
The Model 5010 provides customers a TOTAL RF POWER MEASUREMENT SOLUTION
for Thruline (In-line) Power Measurements with Accuracy of ±5% of readings.
2200 to 2300 MHz
2300 to 2500 MHz
2500 to 2700 MHz
Accuracy
Dynamic Range
Peak/Average
Power Ratio
Settling Time
Connectors
Insertion VSWR
Dimensions
Weight
Operating Temp.
Storage Temp.
Humidity
Note
Bird® THRULINE® directional
dual-element line section
Element limited. Please view element
guide for current listing.
Element limited. Please view element guide
for current listing. 1 W to 1000 W*.
±5% of reading (15° to 35°C), ±7%
of reading (-10° to 50°C)
40:1 (E.G. 50 W element
measure 1.25 W to 50 W).
10 dB maximum with DPM elements
< 2 seconds
QC Type. Female N normally supplied.
1.05:1 from 0.45 to 1000 MHz
(with N connectors)
1.875" H x 1.875" W x 3.5" D
(47.7 x 47.7 x 88.9 mm)
excluding connectors
1.12 lbs. (0.51 kg)
-10° to +50° C
-40° to +75° C
95% max. (non-condensing)
The Bird Model 5000 or the
Bird Site Analyzer Series (SA-4000
or SA-2500A) is required.
NEW TERMINATING POWER SENSOR (MODEL 5011) (See page 9)
The Model 5011 provides customers a TOTAL RF POWER MEASUREMENT SOLUTION
to measure Base Station Power and/or Broadcast Transmitter Power with Accuracy
of ±5% of readings.
7
Bird® Electronic Corporation 1-866-695-4569 www.bird-electronic.com
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
www.bird-electronic.com 1-866-695-4569 Bird® Electronic Corporation
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
8
RF Digital Power Meter
Thruline® Directional Power Sensor
Model 5000
Model 5010 & Elements
Thruline® Digital
Power Sensor
RF Digital Power
Meter
BIRD® MODEL 5000 RF Digital Power Meter —
MODEL 5010 Dual-Socket Thruline® Directional Power Sensor
Requires Bird MODEL 5010 or MODEL 5011 Sensor
Bird’s Most Sophisticated Thruline® Sensor System is the Heart of the MODEL 5000
(Requires Bird® MODEL 5000, SA-4000, or SA-2500A)
The “NEW” Industry Standard Hand-Held RF Power Meter
Easy-To-Operate & Field Ready
Versatility to Handle Any Job
The Model 5000 must be coupled with Model 5010
Thruline Power Sensor or a Model 5011 Terminating
Power Sensor. Model 5000 handles Cellular, PCS, AMPS,
CDMA, GSM, TDMA, ISM, UMTS, 3G Wireless, WLL, Paging,
Conventional/Trunked Radio, Aviation, Military, and
Analog or Digital Audio and Television Broadcast.
Readings Any Way You Need Them
The highly-visible, back-lit LCD screen displays power
readings in digital format, while a 20-segment analog
bar graph tracks measurements as well. Compatible with
the Model 5010 Directional Power Sensor to display
forward and reflected power as well as VSWR and
Return Loss. Also compatible with the Model 5011
Terminating Power Sensor to measure power directly or
via a coupled test port. This portable and rugged unit also
provides 100 hours of battery life per charge.
Serial connector to sensor
facilitates hand-held
operation and remote
sensing
Serial connector for
operation with a personal
computer and Bird PC
Tool software
Back-lit, high-contrast LCD
Speed Keys
Easy-to-use, calculator-like
interface
Compact ergonomic case
DPM-xx
Measurement Mode
Sensor Interface
PC Interface
Dimensions
Weight
Power Supply
Battery Life
Operating Temp.
Storage Temp.
Humidity
Standard
The Model 5010 Power Sensor is compatible with many existing Bird accessories for 7/8" line,
including signal samplers, and over 20 types of QC connectors. QC Connectors can rapidly and
conveniently be changed in the field by removing four screws from the connector.
SPECIFICATIONS
Sensor Type
*DPM Element Guide
Model
5010
5011
Back-lit liquid crystal technology, 2.25" x 3.0"
(57 x 76 mm). Three-way display consisting
of major and minor digital display elements,
analog bar graph element, annunciators, battery
indicator and speed-key legends.
TRUE AVERAGE POWER, for measurement
of conventional or digitally-modulated RF.
9-pin D-shell RS-232 serial connector. Sensor is
powered from meter. Sensor is compatible with Bird
VSWR Alarm products and Broadcast Power Monitor
(BPM) product family.
9-pin RS-232 serial port for connection to a PC.
8.0" H x 4.63" W x 1.75" D (203 x 117.6 x 44.5 mm)
1.5 lbs., nominal (0.68 kg)
Rechargeable Nickel-Metal Hydride (NiMH) battery.
Meter may be operated from AC mains
using supplied adapter.
100 hours, minimum, per charge.
-10° to +50° C
-40° to +75° C
95% max. (non-condensing)
Instruction manual, serial communications
cable (5010), AC charger/adapter
Model 5010
Thruline® Directional
Power Sensor
Model 5000
RF Digital Power Meter
OPTIONAL ACCESSORIES
Display
The Model 5010 Dual-Socket THRULINE® Power Sensor
is a precision 50-ohm 7/8-inch “Smart” Line Section which accepts
Bird digital-ready Plug-in Elements. The Model 5010 Sensor provides true
average power readings for digital as well as traditional analog RF systems.
Internal rechargeable
Nickel-Metal Hydride
batteries
*DPM elements are available.
SPECIFICATIONS
• Dual-element THRULINE® design for simultaneous
forward and reflected power readings.
• Measures true average power.
• ±5% of reading accuracy rivals thermal
wattmeters in actual field use.
Small,
easily-remoted sensor facilitates
•
convenient hand-held operation.
5A2238-8
5000-030
5000-035
Description
Directional Power Sensor (DPS) (See page 8)
Requires pair of DPM Elements
DPM Elements, 2 MHz to 2.7 GHz
(See Element guide page 8)
Terminating Power Sensor (TPS), (See page 9)
40 MHz to 4 GHz
Cigarette Lighter Adapter
Soft Carrying Case
Hard Carrying Case
Frequency
Range
Forward
Power Range
Reflected
Power Range
Forward
Element
Reflected
Element
Frequency Range
2 to 30 MHz
1.25 W to 50 W
12.5 W to 500 W
1.25 W to 50 W
12.5 W to 500 W
1.25 W to 50 W
12.5 W to 500 W
25 W to 1 kW
1.25 W to 50 W
12.5 W to 500 W
62.5 W to 2.5 kW
125 mW to 5W
1.25 W to 50 W
12.5 W to 500 W
125 mW to 5W
1.25 W to 50 W
2.5 W to 100 W
12.5 W to 500 W
25 W to 1 kW
125 mW to 5W
1.25 W to 50 W
125 mW to 5W
1.25 W to 50 W
125 mW to 5W
1.25 W to 50 W
1.25 W to 50 W
125 mW to 5W
125 mW to 5W
625 mW to 25 W
125 mW to 5W
125 mW to 5W
125 mW to 5W
1.25 W to 50 W
125 mW to 5W
1.25 W to 50 W
125 mW to 5W
1.25 W to 50 W
2.5 W to 100 W
125 mW to 5W
1.25 W to 50 W
6.25 W to 250 W
12.5 mW to 500 mW
125 mW to 5W
1.25 W to 50 W
12.5 mW to 500 mW
125 mW to 5W
250 mW to 10 W
1.25 W to 50 W
2.5 W to 100 W
12.5 mW to 500 mW
125 mW to 5W
12.5 mW to 500 mW
125 mW to 5W
12.5 mW to 500 mW
125 mW to 5W
125 mW to 5W
12.5 mW to 500 mW
12.5 mW to 500 mW
62.5 mW to 2.5 W
12.5 mW to 500 mW
12.5 mW to 500 mW
DPM-50H
DPM-500H
DPM-50A
DPM-500A
DPM-50B
DPM-500B
DPM-1000B
DPM-50C
DPM-500C
DPM-2500C
DPM-5D
DPM-50D
DPM-500D
DPM-5E
DPM-50E
DPM-100E
DPM-500E
DPM-1000E
DPM-5J
DPM-50J
DPM-5K
DPM-50K
DPM-5L1
DPM-50L1
DPM-50L2
DPM-5L2
DPM-5M
DPM-25M
DPM-5N
DPM-5R
DPM-5H
DPM-50H
DPM-5A
DPM-50A
DPM-5B
DPM-50B
DPM-100B
DPM-5C
DPM-50C
DPM-250C
DPM-.5D
DPM-5D
DPM-50D
DPM-.5E
DPM-5E
DPM-10E
DPM-50E
DPM-100E
DPM-.5J
DPM-5J
DPM-.5K
DPM-5K
DPM-.5L1
DPM-5L1
DPM-5L2
DPM-.5L2
DPM-.5M
DPM-2.5M
DPM-.5N
DPM-.5R
Power Range
25 to 60 MHz
50 to 125 MHz
100 to 250 MHz
200 to 500 MHz
Model 5010
Directional Power Sensor
400 to 960 MHz
950 to 1260 MHz
1100 to 1800 MHz
Model 5011
Terminating Power Sensor
1700 to 1990 MHz
Digital Power Meter Option
1990 to 2200 MHz
DIRECTIONAL POWER SENSOR (MODEL 5010) (See page 8)
The Model 5010 provides customers a TOTAL RF POWER MEASUREMENT SOLUTION
for Thruline (In-line) Power Measurements with Accuracy of ±5% of readings.
2200 to 2300 MHz
2300 to 2500 MHz
2500 to 2700 MHz
Accuracy
Dynamic Range
Peak/Average
Power Ratio
Settling Time
Connectors
Insertion VSWR
Dimensions
Weight
Operating Temp.
Storage Temp.
Humidity
Note
Bird® THRULINE® directional
dual-element line section
Element limited. Please view element
guide for current listing.
Element limited. Please view element guide
for current listing. 1 W to 1000 W*.
±5% of reading (15° to 35°C), ±7%
of reading (-10° to 50°C)
40:1 (E.G. 50 W element
measure 1.25 W to 50 W).
10 dB maximum with DPM elements
< 2 seconds
QC Type. Female N normally supplied.
1.05:1 from 0.45 to 1000 MHz
(with N connectors)
1.875" H x 1.875" W x 3.5" D
(47.7 x 47.7 x 88.9 mm)
excluding connectors
1.12 lbs. (0.51 kg)
-10° to +50° C
-40° to +75° C
95% max. (non-condensing)
The Bird Model 5000 or the
Bird Site Analyzer Series (SA-4000
or SA-2500A) is required.
NEW TERMINATING POWER SENSOR (MODEL 5011) (See page 9)
The Model 5011 provides customers a TOTAL RF POWER MEASUREMENT SOLUTION
to measure Base Station Power and/or Broadcast Transmitter Power with Accuracy
of ±5% of readings.
7
Bird® Electronic Corporation 1-866-695-4569 www.bird-electronic.com
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
www.bird-electronic.com 1-866-695-4569 Bird® Electronic Corporation
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
8
Terminating Power Sensor
Broadcast Power Monitor
Model 5011
Model 3129
Terminating Power
Sensor
BIRD® MODEL 5011 Terminating Power Sensor
Designed to make Terminating Power Measurements
with the full flexibility of a portable precision instrument
(Requires Bird MODEL 5000, SA-4000, or SA-2500A)
•
•
•
•
•
•
•
•
•
Significant cost and time savings
East-To-Use
Field Ready
No calibration required
Both digital as well as analog modulations including
(CDMA, GSM, TDMA, 8-VSB and COFDM)
Model 5011
Broadcast Transmitter Power with
Terminating Power Sensor
accuracy of +/-5% of readings
Optional 40dB attenuator provides 100mW to 50W capability, other ranges also available
Measure power directly or via coupled test port
Broadband, does not require elements
SPECIFICATIONS
Sensor Type
Frequency Range
Power Range
Peak/Average Ratio
Accuracy
Warm Up Time
Input Impedance
Input VSWR
Input Connector
Output Connector
Power Supply
Operating Temp.
Storage Temp.
Humidity
Altitude
Size
Weight
Terminating Power Sensor. Terminated average power measurement.
40 MHz - 4 GHz
-20.000 to +10.000 dBm (10.000 µW to 10.000 mW)
12 dB maximum
±5% of reading ±1mW RSS (excluding mismatch uncertainty)*
5 Minutes
50 Ohms (nominal)
Typical 1.03 (36.6 dB return loss); maximum 1.20 (20.8 dB return loss)
Precision N Male
Male DB-9 to interface to Digital Power Meter or Site Analyzer
From host instrument via cable connection
-10° to 50° C (14° to 122° F)
-40° to 80° C (40° to 176° F)
95% maximum (non-condensing)
15,000 ft operating
6" long (including connectors); 1.5" diameter
3/4 lb. Maximum
* When operating below 100 MHz and above 40°C, add 1%.
NOTE: The Bird Model 5000 or the Bird Site Analyzer Series
(SA-4000, SA-2500A, or SA-2000A) is required.
OPTIONAL ACCESSORIES
Model
5000
SA-2500A
SA-4000
8353A040-50
8353A030-10
5011-CALDATA
4240-500-1
4240-500-3
4240-500-4
4240-500-5
PA-FNME
PA-FNFE
TC-MNFN-1.5-G
TC-MNFN-1.5
TC-MNFN-3.0
5011A035-1
9
Broadcast Power
Monitor
BIRD® BPM Series
Broadcast Power Monitors for Digital and Analog Applications
•
•
•
•
•
•
Accurately measures power in digitally modulated and multi-carrier systems.
VSWR, return loss and match efficiency calculations using hardware or PC-based software displays.
+/-5% of reading accuracy for power; +/-10% for VSWR.
Handles peak to average ratio of greater than 10 dB.
Includes alarm function to signal transmitter or antenna problems.
7/8", 1 5/8", 3 1/8", 4 1/16" and 6 1/8"
50 Ohm line section sensors for use
with industry-standard rigid transmission lines.
OPERATING CHARACTERISTICS
Frequency Range* 54 MHz-890 MHz
Forward/Reflected Depends on line section and
Power Range* sensor element
Measurement Type In-line, true average power
Peak/Average Ratio 10 dB maximum
Coupler Directivity >25 dB
Accuracy +/-5% of reading
Alarms VSWR
No Forward Power
High Forward Power
Outputs SPDT relay contacts and open collector
Model 3129 4 digit forward and 4 digit reflected
power display, LCD
Operating Voltage 115/230 VAC @ 50/60 Hz
Operating Power Less than 10 watts
Dimensions 5.25" X 19" X 1.75"
(133.35 X 483 X 44.5 mm)
Weight Approximately 2 lbs. (0.85 kb)
Supplied with 50 feet of cable to connect RS-232
and serial ports between 3129 and
line section, and serial interface cable
Used with PC Display “virtual meter” software display
Remote Interface Female DB-9, compatible with IBM
Port Connector PC AT serial port
Protocol Serial RS-232, with selectable
baud rate, parity, and handshake
LINE SECTION
Operating Temperature -10 to +50˚ C (14 to 122˚ F)
Storage Temperature -40 to + 80˚ C (-40 to 176˚ F)
Humidity 95% +/-5% maximum (noncondensing)
Altitude up to 10,000 feet (3,048 m)
Calibration cycle >1 year
*Frequency and power level depend on line section, sensor element, and selected display option. While
designed for digital broadcast, the Broadcast Power Monitor can be used for a wide range of frequencies,
power levels, and applications. Please contact the factory to discuss your application and requirements.
Description
Digital Power Meter (DPM)
Site Analyzer, Antenna & Cable Tester (780 to 2500 MHz)
Site Analyzer, Antenna & Cable Tester (25 to 4000 MHz)
Attenuator, 50 W, 40 dB, N(F) to N(M) 100 mW to 50 W with TPS 5011
Attenuator, 100 W, 30 dB, N(F) to N(M) 10 mW to 10 W with TPS 5011
Calibration Data for TPS 5011 Attenuators and Accessories.
Adapter, N(F) to N(F)
Adapter, right angle, N(F) to N(M)
Adapter, N(F) to SMA(F)
Adapter, N(F) to SMA(M)
Adapter, N (F) to 7/16 DIN (M).
Adapter, N (F) to 7/16 DIN (F).
Test cable, 1.5 m., N (M)/N (F) conn.
Test cable, armored, PS, 1.5 m., N (F) to N (M)
Test cable, armored, PS, 3.0 m., N (F) to N (M)
DC Block, N(F) to N(M)
Bird® Electronic Corporation 1-866-695-4569 www.bird-electronic.com
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
BROADCAST POWER MONITOR
Model
BPM7
BPM1
BPM1U
BPM1UF
BPM3
BPM3U
BPM3UF
BPM4D
BPM4M
BPM6
Description
7/8" Line Section, Quick change (Type N std.)
1 5/8" Line, flanged
1 5/8" Line, unflanged, recessed center conductor
1 5/8" Line, unflanged, flush center conductor
3 1/8" Line, flanged
3 1/8" Line, unflanged, recessed center conductor
3 1/8" Line, unflanged, flush center conductor
4 1/16" Line, Dielectric flanged
4 1/16" Myat, flanged
6 1/8" Line, flanged
BPM Elements
200-500 MHz
Power Level
10
100
250
2,500
BPM7
BPM7-10D
BPM7-100D
BPM7-250D
BPM7-2.5KD
1100-1800 MHz
Power Level
BPM7
BPM7-40K
40
80
BPM7-80K
400
BPM7-400K
800
BPM7-800K
Model 3129
Broadcast Power Monitor
BPM Elements
50-125 MHz
Power Level
250
500
1,000
1,500
2,500
4,000
5,000
6,000
8,000
10,000
15,000
25,000
40,000
50,000
60,000
80,000
100,000
150,000
BPM7
BPM7-2.5KB
100-250 MHz
Power Level
50
100
250
500
1,000
2,500
5,000
10,000
25,000
470-890 MHz
Power Level
50
200
250
300
500
1,000
1,500
2,000
2,500
3,000
4,000
5,000
6,000
10,000
15,000
25,000
30,000
40,000
50,000
60,000
BPM1
BPM3
BPM1-1KB
BPM3-1KB
BPM1-2.5KB
BPM3-2.5KB
BPM4D
BPM4M
BPM4-4KB
BPM4-4KB
BPM4-8KB
BPM4-8KB
BPM6
BPM7-250B
BPM7-500B
BPM7-5KB
BPM3-5KB
BPM6-6KB
BPM1-10KB
BPM3-10KB
BPM1-25KB
BPM3-25KB
BPM6-10KB
BPM6-15KB
BPM4-40KB
BPM4-40KB
BPM4-80KB
BPM4-80KB
BPM3-50KB
BPM6-60KB
BPM6-100KB
BPM6-150KB
BPM7
BPM7-50C
BPM7-100C
BPM7-250C
BPM7-500C
BPM7-5KC
BPM1
BPM1-250C
BPM1-500C
BPM1-1KC
BPM1-2.5KC
BPM1-5KC
BPM1-10KC
BPM3
BPM4D
BPM4M
BPM6
BPM3-500C
BPM3-1KC
BPM6-2.5KC
BPM3-5KC
BPM3-10KC
BPM6-25KC
BPM7
BPM1
BPM3
BPM4D
BPM4M
BPM4-1.5KE
BPM4-1.5KE
BPM4-4KE
BPM4-4KE
BPM4-15KE
BPM4-15KE
BPM4-40KE
BPM4-40KE
BPM6
BPM7-50E
BPM1-200E
BPM7-250E
BPM7-500E
BPM1-300E
BPM1-500E
BPM3-250E
BPM3-300E
BPM3-500E
BPM3-1KE
BPM1-2KE
BPM7-2.5KE
BPM1-3KE
BPM1-5KE
BPM3-2.5KE
BPM3-3KE
BPM6-3KE
BPM3-5KE
BPM6-6KE
BPM3-10KE
BPM3-25KE
BPM6-30KE
BPM6-60KE
www.bird-electronic.com 1-866-695-4569 Bird® Electronic Corporation
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
10
Terminating Power Sensor
Broadcast Power Monitor
Model 5011
Model 3129
Terminating Power
Sensor
BIRD® MODEL 5011 Terminating Power Sensor
Designed to make Terminating Power Measurements
with the full flexibility of a portable precision instrument
(Requires Bird MODEL 5000, SA-4000, or SA-2500A)
•
•
•
•
•
•
•
•
•
Significant cost and time savings
East-To-Use
Field Ready
No calibration required
Both digital as well as analog modulations including
(CDMA, GSM, TDMA, 8-VSB and COFDM)
Model 5011
Broadcast Transmitter Power with
Terminating Power Sensor
accuracy of +/-5% of readings
Optional 40dB attenuator provides 100mW to 50W capability, other ranges also available
Measure power directly or via coupled test port
Broadband, does not require elements
SPECIFICATIONS
Sensor Type
Frequency Range
Power Range
Peak/Average Ratio
Accuracy
Warm Up Time
Input Impedance
Input VSWR
Input Connector
Output Connector
Power Supply
Operating Temp.
Storage Temp.
Humidity
Altitude
Size
Weight
Terminating Power Sensor. Terminated average power measurement.
40 MHz - 4 GHz
-20.000 to +10.000 dBm (10.000 µW to 10.000 mW)
12 dB maximum
±5% of reading ±1mW RSS (excluding mismatch uncertainty)*
5 Minutes
50 Ohms (nominal)
Typical 1.03 (36.6 dB return loss); maximum 1.20 (20.8 dB return loss)
Precision N Male
Male DB-9 to interface to Digital Power Meter or Site Analyzer
From host instrument via cable connection
-10° to 50° C (14° to 122° F)
-40° to 80° C (40° to 176° F)
95% maximum (non-condensing)
15,000 ft operating
6" long (including connectors); 1.5" diameter
3/4 lb. Maximum
* When operating below 100 MHz and above 40°C, add 1%.
NOTE: The Bird Model 5000 or the Bird Site Analyzer Series
(SA-4000, SA-2500A, or SA-2000A) is required.
OPTIONAL ACCESSORIES
Model
5000
SA-2500A
SA-4000
8353A040-50
8353A030-10
5011-CALDATA
4240-500-1
4240-500-3
4240-500-4
4240-500-5
PA-FNME
PA-FNFE
TC-MNFN-1.5-G
TC-MNFN-1.5
TC-MNFN-3.0
5011A035-1
9
Broadcast Power
Monitor
BIRD® BPM Series
Broadcast Power Monitors for Digital and Analog Applications
•
•
•
•
•
•
Accurately measures power in digitally modulated and multi-carrier systems.
VSWR, return loss and match efficiency calculations using hardware or PC-based software displays.
+/-5% of reading accuracy for power; +/-10% for VSWR.
Handles peak to average ratio of greater than 10 dB.
Includes alarm function to signal transmitter or antenna problems.
7/8", 1 5/8", 3 1/8", 4 1/16" and 6 1/8"
50 Ohm line section sensors for use
with industry-standard rigid transmission lines.
OPERATING CHARACTERISTICS
Frequency Range* 54 MHz-890 MHz
Forward/Reflected Depends on line section and
Power Range* sensor element
Measurement Type In-line, true average power
Peak/Average Ratio 10 dB maximum
Coupler Directivity >25 dB
Accuracy +/-5% of reading
Alarms VSWR
No Forward Power
High Forward Power
Outputs SPDT relay contacts and open collector
Model 3129 4 digit forward and 4 digit reflected
power display, LCD
Operating Voltage 115/230 VAC @ 50/60 Hz
Operating Power Less than 10 watts
Dimensions 5.25" X 19" X 1.75"
(133.35 X 483 X 44.5 mm)
Weight Approximately 2 lbs. (0.85 kb)
Supplied with 50 feet of cable to connect RS-232
and serial ports between 3129 and
line section, and serial interface cable
Used with PC Display “virtual meter” software display
Remote Interface Female DB-9, compatible with IBM
Port Connector PC AT serial port
Protocol Serial RS-232, with selectable
baud rate, parity, and handshake
LINE SECTION
Operating Temperature -10 to +50˚ C (14 to 122˚ F)
Storage Temperature -40 to + 80˚ C (-40 to 176˚ F)
Humidity 95% +/-5% maximum (noncondensing)
Altitude up to 10,000 feet (3,048 m)
Calibration cycle >1 year
*Frequency and power level depend on line section, sensor element, and selected display option. While
designed for digital broadcast, the Broadcast Power Monitor can be used for a wide range of frequencies,
power levels, and applications. Please contact the factory to discuss your application and requirements.
Description
Digital Power Meter (DPM)
Site Analyzer, Antenna & Cable Tester (780 to 2500 MHz)
Site Analyzer, Antenna & Cable Tester (25 to 4000 MHz)
Attenuator, 50 W, 40 dB, N(F) to N(M) 100 mW to 50 W with TPS 5011
Attenuator, 100 W, 30 dB, N(F) to N(M) 10 mW to 10 W with TPS 5011
Calibration Data for TPS 5011 Attenuators and Accessories.
Adapter, N(F) to N(F)
Adapter, right angle, N(F) to N(M)
Adapter, N(F) to SMA(F)
Adapter, N(F) to SMA(M)
Adapter, N (F) to 7/16 DIN (M).
Adapter, N (F) to 7/16 DIN (F).
Test cable, 1.5 m., N (M)/N (F) conn.
Test cable, armored, PS, 1.5 m., N (F) to N (M)
Test cable, armored, PS, 3.0 m., N (F) to N (M)
DC Block, N(F) to N(M)
Bird® Electronic Corporation 1-866-695-4569 www.bird-electronic.com
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
BROADCAST POWER MONITOR
Model
BPM7
BPM1
BPM1U
BPM1UF
BPM3
BPM3U
BPM3UF
BPM4D
BPM4M
BPM6
Description
7/8" Line Section, Quick change (Type N std.)
1 5/8" Line, flanged
1 5/8" Line, unflanged, recessed center conductor
1 5/8" Line, unflanged, flush center conductor
3 1/8" Line, flanged
3 1/8" Line, unflanged, recessed center conductor
3 1/8" Line, unflanged, flush center conductor
4 1/16" Line, Dielectric flanged
4 1/16" Myat, flanged
6 1/8" Line, flanged
BPM Elements
200-500 MHz
Power Level
10
100
250
2,500
BPM7
BPM7-10D
BPM7-100D
BPM7-250D
BPM7-2.5KD
1100-1800 MHz
Power Level
BPM7
BPM7-40K
40
80
BPM7-80K
400
BPM7-400K
800
BPM7-800K
Model 3129
Broadcast Power Monitor
BPM Elements
50-125 MHz
Power Level
250
500
1,000
1,500
2,500
4,000
5,000
6,000
8,000
10,000
15,000
25,000
40,000
50,000
60,000
80,000
100,000
150,000
BPM7
BPM7-2.5KB
100-250 MHz
Power Level
50
100
250
500
1,000
2,500
5,000
10,000
25,000
470-890 MHz
Power Level
50
200
250
300
500
1,000
1,500
2,000
2,500
3,000
4,000
5,000
6,000
10,000
15,000
25,000
30,000
40,000
50,000
60,000
BPM1
BPM3
BPM1-1KB
BPM3-1KB
BPM1-2.5KB
BPM3-2.5KB
BPM4D
BPM4M
BPM4-4KB
BPM4-4KB
BPM4-8KB
BPM4-8KB
BPM6
BPM7-250B
BPM7-500B
BPM7-5KB
BPM3-5KB
BPM6-6KB
BPM1-10KB
BPM3-10KB
BPM1-25KB
BPM3-25KB
BPM6-10KB
BPM6-15KB
BPM4-40KB
BPM4-40KB
BPM4-80KB
BPM4-80KB
BPM3-50KB
BPM6-60KB
BPM6-100KB
BPM6-150KB
BPM7
BPM7-50C
BPM7-100C
BPM7-250C
BPM7-500C
BPM7-5KC
BPM1
BPM1-250C
BPM1-500C
BPM1-1KC
BPM1-2.5KC
BPM1-5KC
BPM1-10KC
BPM3
BPM4D
BPM4M
BPM6
BPM3-500C
BPM3-1KC
BPM6-2.5KC
BPM3-5KC
BPM3-10KC
BPM6-25KC
BPM7
BPM1
BPM3
BPM4D
BPM4M
BPM4-1.5KE
BPM4-1.5KE
BPM4-4KE
BPM4-4KE
BPM4-15KE
BPM4-15KE
BPM4-40KE
BPM4-40KE
BPM6
BPM7-50E
BPM1-200E
BPM7-250E
BPM7-500E
BPM1-300E
BPM1-500E
BPM3-250E
BPM3-300E
BPM3-500E
BPM3-1KE
BPM1-2KE
BPM7-2.5KE
BPM1-3KE
BPM1-5KE
BPM3-2.5KE
BPM3-3KE
BPM6-3KE
BPM3-5KE
BPM6-6KE
BPM3-10KE
BPM3-25KE
BPM6-30KE
BPM6-60KE
www.bird-electronic.com 1-866-695-4569 Bird® Electronic Corporation
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
10
Digital Air® Loads
VSWR and Antenna Testers
Digital Air® Load
Bird® VSWR
®
BIRD® VSWR MONITOR / ALARM
Bird High-Power Forced Air Loads
for Broadcast Applications
Monitor/Alarm
Around-The-Clock Monitoring and Protection of Cellular
and Trunking Site Transmitters
Bird is now offering a new series of high-power, air cooled loads that
provide a fully self-contained and convenient means for measuring power
and performing transmitter maintenance. Available in both VHF and UHF
models, Digital Air loads require no plumbing, pumps or complicated
installation and setup procedures. Models range from 5kW through 80kW
with a variety of input connectors to suit your installation.
•
•
•
•
•
•
•
•
• Low maintenance and high reliability.
• Handles > 10 dB Peak to Average power ratio.
< 1.05:1 typical VSWR (1.1:1 max.) across rated frequency range.
• Ductable exhaust and cool-to-the-touch exterior surfaces.
• Flanged and unflanged EIA & IEC industry standard connectors.
• Fully shielded against the production of extraneous radiation.
• Manual/automatic fan modes, plus interlock for overload protection.
VHF
Impedance
VSWR (DC-240 MHz)
Cooling Method
Peak to Average Power
Ambient Temperature
Interlock Contact Rating
Finish
AC Power Required
50 ohms nominal
1.05:1 typical, 1.10:1 maximum
Forced air-cooled
>10 dB
-40˚C to +45˚C (-40˚F to +113˚F)
10 A @ 120 VAC, 5 A @ 250 VAC
Blue Powder Coat
100V/115V/230V 50/60 Hz
Digital Air ® Load
UHF
Impedance
VSWR (470-890 MHz)
Cooling Method
Peak to Average Power
Ambient Temperature
Interlock Contact Rating
Finish
AC Power Required
50 ohms nominal
1.05:1 typical, 1.10:1 maximum
Forced air-cooled
>10 dB*
-40˚C to +45˚C (-40˚F to +113˚F)
10 A @ 120 VAC, 5 A @ 250 VAC
Blue Powder Coat
100V/115V/230V 50/60 Hz
*DA40 Peak to Average is 14 dB
Compatible with analog or digital cellular and trunked radios
Monitor VSWR and power
Alarms with high VSWR or low power
Remote capability enables multiple sites to be monitored
from a single location
Pays for itself by eliminating unnecessary travel and labor for site servicing
May mount at output of transmit combiner or linear power amplifier
Transparent to the system — Low insertion characteristics and intermod products less than -130dBc
True average power reading with intelligent VSWR trend analysis eliminates false alarms
OPERATING CHARACTERISTICS
Models and Frequency Range*
FORWARD POWER MEASUREMENT
Type
Power Measurement Range
Accuracy
Maximum Input Power
Insertion Loss
VSWR
Reflected Power Measurement
VSWR ALARM CHARACTERISTICS
Set points and Accuracy
Relay Contact Type
Contact Rating
Visual
Stimulus
Reset
Model
DA10V
Power
Rating
10 kW
Frequency
Range
0-240 MHz
Dimensions
(LxWxH)
23.5" x 23.5" x 59"
597mm x 597mm x 1499mm
Weight
130 lbs.
58.97 kg
DA25V
25 kW
0-240 MHz
27" x 27" x 61"
686mm x 686mm x 1549mm
160 lbs.
72.57 kg
DA5
5 kW
470-890 MHz
17" x 17" x 64"
432mm x 432mm x 1608mm
19.5" x 19.5" x 68.5"
495mm x 495mm x 1740mm
25" x 25" x 76.5"
635mm x 635mm x 1943mm
27" x 27" x 76.5"
686mm x 686mm x 1943mm
100 lbs.
45.5 kg
130 lbs.
58.97 kg
192 lbs.
87.09 kg
245 lbs.
111.13 kg
27.5" x 27.5" x 84.0"
701mm x 701mm x 2134mm
310 lbs.
140.6 kg
DA10
10 kW
470-890 MHz
DA15
15 kW
470-890 MHz
DA25
25 kW
470-890 MHz
DA40
40 kW
470-890 MHz
Other models available, please consult factory.
Connector
1 5/8" EIA Flanged
1 5/8" Unflanged
3 1/8" EIA Flanged
3 1/8" Unflanged
3 1/8" EIA Flanged
3 1/8" Unflanged
4 1/2" IEC Unflanged
3 1/8" EIA Flanged
3 1/8" Unflanged
3 1/8" EIA Flanged
3 1/8" Unflanged
3 1/8" EIA Flanged
3 1/8" Unflanged
4 1/16" Myat Flanged
4 1/16" Myat Unflanged
4 1/2" IEC Unflanged
6 1/8" EIA Flanged
4 7/8" IEC Unflanged
Interface Port
Connector
Protocol
Model 7005A800: 869 to 894 MHz
Model 7005A890: 851 to 869 MHz
Average reading
25 W to 500 W
± 5% of reading, ± 1 count
750 W average, 3.0:1 VSWR
0.12 dB maximum
1.07:1 maximum
2.5 W to 50 W average
1.3:1 to 1.8:1 in 0.1 VSWR increments
Dry, Form C. Relay contacts:
COMMON, N.O., N.C.
100Vdc @ 0.5 A
Red LED illuminates to show alarm condition
VSWR set point exceeded, response time
proportional to overload
Local mechanical reset switch.
Remote input (Reset @ 0 to +0.8 Vdc)
Female DB-9, compatible
with IBM PC-type serial port
Serial RS-232, 9600 baud, no parity,
8 data bits, 1 stop bit, no handshake
AT100, AT400, AT800
Frequency Range
Frequency Resolution
Frequency Accuracy
Measurement Range
Measurement Speed
(Typical)
Preprogrammed Bands
Field Strength
Test Port
Operating Temperature
Storage Temperature
Size
(including connector)
Weight
Bird® Electronic Corporation 1-866-695-4569 www.bird-electronic.com
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
PC Software-Based
Display Application
PHYSICAL ENVIRONMENTAL SPECIFICATIONS
General Thruline® sensor directly inserts in 50W line
RF Connector Model 7005A800 Type N(F) in, N(M) out
Model 7005A890 Type N(F) in, N(M) out
Alarm/Power Connector 15-pin female “D” shell
Operating Temperature 0 to 50˚ C
Storage Temperature -20˚ C to 80˚ C
Humidity 0 to 95% maximum (non-condensing)
Altitude Up to 3000 m above sea level
Passive Intermod Products less than -130 dBc
Power Requirements Model 7005A800: +16 to +28 VDC
Model 7005A890: -36 to -72 VDC
Dimensions 5.5" H x 4.8" W x 1.1" D
(excluding connectors) (140mm x 122 mm x 28 mm)
Weight less than 2 lbs. (0.45 kg)
* Call for availability of other frequency and power ranges.
Bird Electronic Corporation reserves the right to change specifications without notice or obligation.
SOFTWARE
The VSWR Monitor / Alarm software package permits an MS Windows-compatible
PC to display a variety of measured and calculated values from each 7005A:
•
•
•
•
Forward power in watts and dBm
Reflected power in watts
Reflection coefficient
Transmitted power efficiency in percent
•
•
•
•
Return loss in dB
VSWR
VSWR Alarm
Low Power Alarm
The software also allows you to set the VSWR Alarm threshold,
toggle on/off low power alarm, and clear all alarms.
Interface
Power Requirements
11
VSWR Monitor/Alarm
AT-100
AT-400
AT-800
2 - 136 MHz
65 - 520 MHz
806 - 960 Mhz
20 kHz
30 kHz
± 50 kHz
± 100kHz
VSWR: 1.00 - 99.99, Match Efficiency: 00 to 100.0%, Return Loss: 0.0 to -32.0 dB
Single Frequency: 5 readings / second, Swept Frequency: 1 sweep / second
—
—
AMPS, NADC, GSM, PDC, CT2
0 to 100% (relative) Sensitivity for Full-scale deflection:
8 v / m @ 100 MHz
0.22 v / m @ 400 MHz
3m @ 12.6 W ERP
Impedance: 50 ohms, nominal. Connector (others available)
N (F)
TNC (F)
Serial (female DB-9 connector)
Batteries: 6 rechargeable AA (KR-15/51)
External DC: 11-16 Vdc, External AC Adapter: 108-132 VAC @ 57-63 Hz, or 207-253 VAC @ 48-52 Hz
0° to 50°C (32 to 122F)
–41° to 71°C (–40° to 160°F)
8" H x 4 5/8" W x 1 3/4" D, (205 mm x 118mm x 42 mm)
1 3/4 lbs. (0.8 kg)
www.bird-electronic.com 1-866-695-4569 Bird® Electronic Corporation
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
12
Digital Air® Loads
VSWR and Antenna Testers
Digital Air® Load
Bird® VSWR
®
BIRD® VSWR MONITOR / ALARM
Bird High-Power Forced Air Loads
for Broadcast Applications
Monitor/Alarm
Around-The-Clock Monitoring and Protection of Cellular
and Trunking Site Transmitters
Bird is now offering a new series of high-power, air cooled loads that
provide a fully self-contained and convenient means for measuring power
and performing transmitter maintenance. Available in both VHF and UHF
models, Digital Air loads require no plumbing, pumps or complicated
installation and setup procedures. Models range from 5kW through 80kW
with a variety of input connectors to suit your installation.
•
•
•
•
•
•
•
•
• Low maintenance and high reliability.
• Handles > 10 dB Peak to Average power ratio.
< 1.05:1 typical VSWR (1.1:1 max.) across rated frequency range.
• Ductable exhaust and cool-to-the-touch exterior surfaces.
• Flanged and unflanged EIA & IEC industry standard connectors.
• Fully shielded against the production of extraneous radiation.
• Manual/automatic fan modes, plus interlock for overload protection.
VHF
Impedance
VSWR (DC-240 MHz)
Cooling Method
Peak to Average Power
Ambient Temperature
Interlock Contact Rating
Finish
AC Power Required
50 ohms nominal
1.05:1 typical, 1.10:1 maximum
Forced air-cooled
>10 dB
-40˚C to +45˚C (-40˚F to +113˚F)
10 A @ 120 VAC, 5 A @ 250 VAC
Blue Powder Coat
100V/115V/230V 50/60 Hz
Digital Air ® Load
UHF
Impedance
VSWR (470-890 MHz)
Cooling Method
Peak to Average Power
Ambient Temperature
Interlock Contact Rating
Finish
AC Power Required
50 ohms nominal
1.05:1 typical, 1.10:1 maximum
Forced air-cooled
>10 dB*
-40˚C to +45˚C (-40˚F to +113˚F)
10 A @ 120 VAC, 5 A @ 250 VAC
Blue Powder Coat
100V/115V/230V 50/60 Hz
*DA40 Peak to Average is 14 dB
Compatible with analog or digital cellular and trunked radios
Monitor VSWR and power
Alarms with high VSWR or low power
Remote capability enables multiple sites to be monitored
from a single location
Pays for itself by eliminating unnecessary travel and labor for site servicing
May mount at output of transmit combiner or linear power amplifier
Transparent to the system — Low insertion characteristics and intermod products less than -130dBc
True average power reading with intelligent VSWR trend analysis eliminates false alarms
OPERATING CHARACTERISTICS
Models and Frequency Range*
FORWARD POWER MEASUREMENT
Type
Power Measurement Range
Accuracy
Maximum Input Power
Insertion Loss
VSWR
Reflected Power Measurement
VSWR ALARM CHARACTERISTICS
Set points and Accuracy
Relay Contact Type
Contact Rating
Visual
Stimulus
Reset
Model
DA10V
Power
Rating
10 kW
Frequency
Range
0-240 MHz
Dimensions
(LxWxH)
23.5" x 23.5" x 59"
597mm x 597mm x 1499mm
Weight
130 lbs.
58.97 kg
DA25V
25 kW
0-240 MHz
27" x 27" x 61"
686mm x 686mm x 1549mm
160 lbs.
72.57 kg
DA5
5 kW
470-890 MHz
17" x 17" x 64"
432mm x 432mm x 1608mm
19.5" x 19.5" x 68.5"
495mm x 495mm x 1740mm
25" x 25" x 76.5"
635mm x 635mm x 1943mm
27" x 27" x 76.5"
686mm x 686mm x 1943mm
100 lbs.
45.5 kg
130 lbs.
58.97 kg
192 lbs.
87.09 kg
245 lbs.
111.13 kg
27.5" x 27.5" x 84.0"
701mm x 701mm x 2134mm
310 lbs.
140.6 kg
DA10
10 kW
470-890 MHz
DA15
15 kW
470-890 MHz
DA25
25 kW
470-890 MHz
DA40
40 kW
470-890 MHz
Other models available, please consult factory.
Connector
1 5/8" EIA Flanged
1 5/8" Unflanged
3 1/8" EIA Flanged
3 1/8" Unflanged
3 1/8" EIA Flanged
3 1/8" Unflanged
4 1/2" IEC Unflanged
3 1/8" EIA Flanged
3 1/8" Unflanged
3 1/8" EIA Flanged
3 1/8" Unflanged
3 1/8" EIA Flanged
3 1/8" Unflanged
4 1/16" Myat Flanged
4 1/16" Myat Unflanged
4 1/2" IEC Unflanged
6 1/8" EIA Flanged
4 7/8" IEC Unflanged
Interface Port
Connector
Protocol
Model 7005A800: 869 to 894 MHz
Model 7005A890: 851 to 869 MHz
Average reading
25 W to 500 W
± 5% of reading, ± 1 count
750 W average, 3.0:1 VSWR
0.12 dB maximum
1.07:1 maximum
2.5 W to 50 W average
1.3:1 to 1.8:1 in 0.1 VSWR increments
Dry, Form C. Relay contacts:
COMMON, N.O., N.C.
100Vdc @ 0.5 A
Red LED illuminates to show alarm condition
VSWR set point exceeded, response time
proportional to overload
Local mechanical reset switch.
Remote input (Reset @ 0 to +0.8 Vdc)
Female DB-9, compatible
with IBM PC-type serial port
Serial RS-232, 9600 baud, no parity,
8 data bits, 1 stop bit, no handshake
AT100, AT400, AT800
Frequency Range
Frequency Resolution
Frequency Accuracy
Measurement Range
Measurement Speed
(Typical)
Preprogrammed Bands
Field Strength
Test Port
Operating Temperature
Storage Temperature
Size
(including connector)
Weight
Bird® Electronic Corporation 1-866-695-4569 www.bird-electronic.com
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
PC Software-Based
Display Application
PHYSICAL ENVIRONMENTAL SPECIFICATIONS
General Thruline® sensor directly inserts in 50W line
RF Connector Model 7005A800 Type N(F) in, N(M) out
Model 7005A890 Type N(F) in, N(M) out
Alarm/Power Connector 15-pin female “D” shell
Operating Temperature 0 to 50˚ C
Storage Temperature -20˚ C to 80˚ C
Humidity 0 to 95% maximum (non-condensing)
Altitude Up to 3000 m above sea level
Passive Intermod Products less than -130 dBc
Power Requirements Model 7005A800: +16 to +28 VDC
Model 7005A890: -36 to -72 VDC
Dimensions 5.5" H x 4.8" W x 1.1" D
(excluding connectors) (140mm x 122 mm x 28 mm)
Weight less than 2 lbs. (0.45 kg)
* Call for availability of other frequency and power ranges.
Bird Electronic Corporation reserves the right to change specifications without notice or obligation.
SOFTWARE
The VSWR Monitor / Alarm software package permits an MS Windows-compatible
PC to display a variety of measured and calculated values from each 7005A:
•
•
•
•
Forward power in watts and dBm
Reflected power in watts
Reflection coefficient
Transmitted power efficiency in percent
•
•
•
•
Return loss in dB
VSWR
VSWR Alarm
Low Power Alarm
The software also allows you to set the VSWR Alarm threshold,
toggle on/off low power alarm, and clear all alarms.
Interface
Power Requirements
11
VSWR Monitor/Alarm
AT-100
AT-400
AT-800
2 - 136 MHz
65 - 520 MHz
806 - 960 Mhz
20 kHz
30 kHz
± 50 kHz
± 100kHz
VSWR: 1.00 - 99.99, Match Efficiency: 00 to 100.0%, Return Loss: 0.0 to -32.0 dB
Single Frequency: 5 readings / second, Swept Frequency: 1 sweep / second
—
—
AMPS, NADC, GSM, PDC, CT2
0 to 100% (relative) Sensitivity for Full-scale deflection:
8 v / m @ 100 MHz
0.22 v / m @ 400 MHz
3m @ 12.6 W ERP
Impedance: 50 ohms, nominal. Connector (others available)
N (F)
TNC (F)
Serial (female DB-9 connector)
Batteries: 6 rechargeable AA (KR-15/51)
External DC: 11-16 Vdc, External AC Adapter: 108-132 VAC @ 57-63 Hz, or 207-253 VAC @ 48-52 Hz
0° to 50°C (32 to 122F)
–41° to 71°C (–40° to 160°F)
8" H x 4 5/8" W x 1 3/4" D, (205 mm x 118mm x 42 mm)
1 3/4 lbs. (0.8 kg)
www.bird-electronic.com 1-866-695-4569 Bird® Electronic Corporation
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
12
Thruline® RF Directional Wattmeters
Thruline® RF Directional Wattmeters
PEP WATTMETER 4314B — Portable Wattmeter
MODEL 43 — Portable Wattmeter
Power Range
Frequency Range
Insertion VSWR
Accuracy
Connectors
Finish
Nominal Size
(includes connectors)
Weight
Elements
100 mW to 10 kW using Bird Plug-in Elements.*
450 kHz to 2.7 GHz (depending on element)
with N Connectors 1.05 max. to 1000 MHz
±5% of full scale
QC Type (Female N normally supplied)
Light Gray powder coat
6 7/8" H x 5 1/8" W x 3 5/8" D,
(175mm x 130mm x 92mm)
3 lbs. (1.4 kg)
Tables 1, 2, 3, 3A, 4, 6 (page 33-34)
PEAK POWER RETROFIT KIT 4300-400 — Portable Wattmeter
Power Range 100 mW to 10 kW using Bird Plug-in Elements. *
Frequency Range 450 kHz to 2.7 GHz (depending on element)
Accuracy CW Mode: ±5% full scale, Peak mode: ±8% full scale
Modulation Normal voice audio; or
(Peak Mode) Rectangular Pulses
Duty cycle: 2% (min),
Repetition rate: 100 pps (min),
Pulse width: 200 µs (min)
Battery Life 48 hours typical
Weight Adds 1 lb. to Model 43
Power Range
Frequency Range
Insertion VSWR
Accuracy
Pulse Parameters
Battery
Connectors
Finish
Nominal Size
(includes connectors)
Weight
Elements
Accessories
100 mW to 10 kW using Bird Plug-in Elements. *
450 kHz to 2.7 GHz (depending on element)
with N Connectors 1.05 max. to 1000 MHz
±5% of full scale CW, ±8% PEP
(min.) Pulse width 0.4 µs (100-2300 MHz),
1.5 µs (26-99 MHz) and 15 µs (2-25 MHz);
repetition rate 30 pps and duty factor 1 x 10¯4 min.
Two 9-Volt alkaline transistor batteries
QC Type (Female N normally supplied)
Light Gray powder coat
6 7/8" H x 5 1/8" W x 3 5/8" D,
(175mm x 130mm x 92mm)
3 lbs. (1.4 kg)
Tables 1, 2, 3, 3A, 4, 5, 6 (page 33-34)
Case (page 39), spare batteries (page 38),
extra QC connectors (page 37).
HIGH-POWER WATTMETER 4305A — Portable Wattmeter
Power Range 50 W to 25 kW using Bird Plug-in Elements. *
Frequency Range 450 kHz to 2.3 GHz (depending on element)
Insertion VSWR with N Connectors 1.05 max.
Accuracy ±5% of full scale
Connectors QC Type (Female N normally supplied)
Finish Gray powder coat
Nominal Size 6 5/16" H x 5 1/8" W x 4 1/4" D,
(includes connectors) (161 mm x 131 mm x 108 mm)
Weight 3 1/4 lbs. (1.5 kg)
Elements 4305A element table below
and 1 5/8AA table (page 35)
Accessories Case (page 39)
4305A Elements
Frequency (MHz)
Power
50 W
2500 W
5000 W
10 Kw
25 Kw
2–30
—
—
—
10KH7
—
.45-2.5
—
—
—
—
25KP7
50-125
—
2500B7
5000B7
—
—
100-250
—
2500C7
—
—
—
400-1000
—
2500E7
—
—
—
1100-1800
50K7
—
—
—
—
MODEL 4308 CELLULAR SPECIALIST WATTMETER — Portable Wattmeter
Power Ranges 1.5, 5, 15, 50 W, with no scale limitations
Frequency Range 440–960 MHz
Insertion VSWR 1.05 with TNC connectors (QC Type)
Accuracy ±5% of full scale
Connectors QC Type (Female TNC normally supplied)
Finish Gray powder coat
Nominal Size 6 7/8" H x 5 1/8" W x 3 5/8" D,
(includes connectors) (175mm x 130mm x 92mm)
Weight 3 lbs. (1.36 kg)
Accessories Case (page 39)
MULTIPOWER, ±5% READING ACCURACY 4410 SERIES— Portable Wattmeters
4410A and 4412
Power Range 2 mW to 10 W, 20 mW to 100 W, 200 mW to 1 kW
or 2 W to 10 kW full scale in one single Plug-in Element.
Any Bird Series 4410-Element may be used.
Frequency Range 200 kHz to 2.3 GHz CW or FM
Insertion VSWR with N Connectors 1.25 max. to 2300 MHz
Accuracy ±5% of reading for any reading above 20% of the Power Range selected for FM
or CW signals without AM. This accuracy is maintained for a full 37 dB
dynamic range with each 3310 Element (except No. 4410-1 200 kHz-535 kHz
which is accurate to ±10% of reading, and 4410-15 1.0-1.8GHz
and 4410-16 1.8-2.3 GHz which are accurate to ±8% of reading.)
Ambient Temperature Elements 4410-1 through -8 and -10 through -16
Range are temperature compensated for rated accuracy from 0° to 50° C (32° to 122°F)
and 4410-20 through -27 from 20° C to 30° C(68° to 86°F)
Over-Range To 120% of nominal full scale
Protection (i.e. 12 W, 120 W, 1200 W, or 12,000 W). No damage or degradation
to the unit will result, regardless of the Range Selector Switch position.
Connectors QC Type (Female N normally supplied)
Finish Gray powder coat
Nominal Size 6 7/8" H x 5 1/8" W x 3 5/8" D,
(includes connectors) (175 mm x 130 mm x 92 mm)
Weight 4410: 3 lbs. (1.4 kg), 4412: 3 1/3 lbs. (1.5 kg)
Elements Tables 9, 9A, 10, 11, 12 (below)
Accessories Case (page 39), spare battery (page 38)
4410 Elements
VARIABLE RF TAP 4431 — Portable Wattmeter
Power and 5 kW max. 2 to 30 MHz,
Frequency Range 1 kW max. 30 to 1000 MHz**
using Bird Plug-in Elements*
Insertion VSWR with N Connectors 1.07 max.** to 1000 MHz
Accuracy ±5% of full scale
Insertion Loss 0.1 dB max (2-512 MHz),
0.2 dB max (512-1000 MHz)*
RF Sample Output Variable – 15 to – 70 dB from BNC (Female) port
Connectors QC Type (Female N normally supplied)
Finish Gray powder coat
Nominal Size 6 7/8" H x 5 1/8" W x 3 5/8" D,
(includes connectors) (175 mm x 130 mm x 92 mm)
Weight 3 1/2 lbs. (1.6 kg)
Elements Tables 1, 2, 3, 3A, 4, 6 (page 33-34)
(within power/frequency range limits stated above)
Accessories Case (page 39)
Table 9 - Full-Scale Power and Frequency Ranges 0-100, 300 Milliwatts 1, 3, 10, 30 Watts
MODEL 4304A FIXED 25-1000 MHz
5-500 WATT ELEMENT — Portable Wattmeter
Power Ranges 5, 15, 50, 150, 500 W, with no scale limitations
except power limited to 150 W from 800–1000 MHz
Frequency Range 25 MHz to 1.0 GHz
Insertion VSWR 25–521 MHz, 1.05 max.
(with UHF female conn.), 512–1000 MHz, 1.07 max.
Insertion Loss 25–512 MHz, 0.10 dB max with UHF female conn.,
512–1000 MHz range, 0.13 dB max
Accuracy 25–100 MHz, ±7% of full scale, using correction charts.
100–512 MHz, ±6 of full scale, no correction needed.
512–1000 MHz, ±7% of full scale, no correction needed.
Connectors QC Type (Female N normally supplied)
Finish Light Gray powder coat
Nominal Size 6 7/8" H x 5 1/8" W x 3 5/8" D,
(includes connectors) (175 mm x 130 mm x 92 mm)
Weight 3 lbs. (1.36 kg)
Accessories Case (page 39)
MHz
Model
30-50
4410-20
50-88
4410-21
88-108
4410-27
100-152
4410-22
150-250
4410-23
225-400
4410-24
400-800
4410-25
800-900
4410-26
900-1000
4410-28
Table 9A - Full-Scale Power and Frequency Ranges 0-100, 300 Milliwatts 1, 3, 10, 30 Watts
MHz
Model
Accuracy
864-868
4410-38
±10% of reading accuracy on 100 mW,
300mW and 1 W, ±5% on all other scales
917-970
4410-29
±5% 10 mW to 1 W only
Table 10 - Full-Scale Power and Frequency Ranges 0-100, 300 Milliwatts 1, 3, 10, 30 Watts
MHz
Model
25-80
4410-10
50-125
4410-11
100-250
4410-12
200-500
4410-13
400-1000
4410-14
1000-1800
4410-15*
1800-2300
4410-16*
Table 11 - Full-Scale Power and Frequency Ranges 0-1, 3, 10, 30, 100, 300, 1000 Watts
MHz
2–30
25-80
50-200
144-520
200-1000
Model
4410-3
4410-5
4410-6
4410-7
4410-8
Table 12 - Full-Scale Power and Frequency Ranges 0-10, 30, 100, 300, 1000, 3000, 10,000 Watts
MHz
0.2-0.535
0.45-2.5
2–30
Model
4410-1
4410-2
4410-4
*Accuracy is ±8% of reading
**Applies only when coupling is less than 30 dB
*Quoted accuracy only when used with other Bird Products
13
Bird® Electronic Corporation 1-866-695-4569 www.bird-electronic.com
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
www.bird-electronic.com 1-866-695-4569 Bird® Electronic Corporation
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
14
Thruline® RF Directional Wattmeters
Thruline® RF Directional Wattmeters
PEP WATTMETER 4314B — Portable Wattmeter
MODEL 43 — Portable Wattmeter
Power Range
Frequency Range
Insertion VSWR
Accuracy
Connectors
Finish
Nominal Size
(includes connectors)
Weight
Elements
100 mW to 10 kW using Bird Plug-in Elements.*
450 kHz to 2.7 GHz (depending on element)
with N Connectors 1.05 max. to 1000 MHz
±5% of full scale
QC Type (Female N normally supplied)
Light Gray powder coat
6 7/8" H x 5 1/8" W x 3 5/8" D,
(175mm x 130mm x 92mm)
3 lbs. (1.4 kg)
Tables 1, 2, 3, 3A, 4, 6 (page 33-34)
PEAK POWER RETROFIT KIT 4300-400 — Portable Wattmeter
Power Range 100 mW to 10 kW using Bird Plug-in Elements. *
Frequency Range 450 kHz to 2.7 GHz (depending on element)
Accuracy CW Mode: ±5% full scale, Peak mode: ±8% full scale
Modulation Normal voice audio; or
(Peak Mode) Rectangular Pulses
Duty cycle: 2% (min),
Repetition rate: 100 pps (min),
Pulse width: 200 µs (min)
Battery Life 48 hours typical
Weight Adds 1 lb. to Model 43
Power Range
Frequency Range
Insertion VSWR
Accuracy
Pulse Parameters
Battery
Connectors
Finish
Nominal Size
(includes connectors)
Weight
Elements
Accessories
100 mW to 10 kW using Bird Plug-in Elements. *
450 kHz to 2.7 GHz (depending on element)
with N Connectors 1.05 max. to 1000 MHz
±5% of full scale CW, ±8% PEP
(min.) Pulse width 0.4 µs (100-2300 MHz),
1.5 µs (26-99 MHz) and 15 µs (2-25 MHz);
repetition rate 30 pps and duty factor 1 x 10¯4 min.
Two 9-Volt alkaline transistor batteries
QC Type (Female N normally supplied)
Light Gray powder coat
6 7/8" H x 5 1/8" W x 3 5/8" D,
(175mm x 130mm x 92mm)
3 lbs. (1.4 kg)
Tables 1, 2, 3, 3A, 4, 5, 6 (page 33-34)
Case (page 39), spare batteries (page 38),
extra QC connectors (page 37).
HIGH-POWER WATTMETER 4305A — Portable Wattmeter
Power Range 50 W to 25 kW using Bird Plug-in Elements. *
Frequency Range 450 kHz to 2.3 GHz (depending on element)
Insertion VSWR with N Connectors 1.05 max.
Accuracy ±5% of full scale
Connectors QC Type (Female N normally supplied)
Finish Gray powder coat
Nominal Size 6 5/16" H x 5 1/8" W x 4 1/4" D,
(includes connectors) (161 mm x 131 mm x 108 mm)
Weight 3 1/4 lbs. (1.5 kg)
Elements 4305A element table below
and 1 5/8AA table (page 35)
Accessories Case (page 39)
4305A Elements
Frequency (MHz)
Power
50 W
2500 W
5000 W
10 Kw
25 Kw
2–30
—
—
—
10KH7
—
.45-2.5
—
—
—
—
25KP7
50-125
—
2500B7
5000B7
—
—
100-250
—
2500C7
—
—
—
400-1000
—
2500E7
—
—
—
1100-1800
50K7
—
—
—
—
MODEL 4308 CELLULAR SPECIALIST WATTMETER — Portable Wattmeter
Power Ranges 1.5, 5, 15, 50 W, with no scale limitations
Frequency Range 440–960 MHz
Insertion VSWR 1.05 with TNC connectors (QC Type)
Accuracy ±5% of full scale
Connectors QC Type (Female TNC normally supplied)
Finish Gray powder coat
Nominal Size 6 7/8" H x 5 1/8" W x 3 5/8" D,
(includes connectors) (175mm x 130mm x 92mm)
Weight 3 lbs. (1.36 kg)
Accessories Case (page 39)
MULTIPOWER, ±5% READING ACCURACY 4410 SERIES— Portable Wattmeters
4410A and 4412
Power Range 2 mW to 10 W, 20 mW to 100 W, 200 mW to 1 kW
or 2 W to 10 kW full scale in one single Plug-in Element.
Any Bird Series 4410-Element may be used.
Frequency Range 200 kHz to 2.3 GHz CW or FM
Insertion VSWR with N Connectors 1.25 max. to 2300 MHz
Accuracy ±5% of reading for any reading above 20% of the Power Range selected for FM
or CW signals without AM. This accuracy is maintained for a full 37 dB
dynamic range with each 3310 Element (except No. 4410-1 200 kHz-535 kHz
which is accurate to ±10% of reading, and 4410-15 1.0-1.8GHz
and 4410-16 1.8-2.3 GHz which are accurate to ±8% of reading.)
Ambient Temperature Elements 4410-1 through -8 and -10 through -16
Range are temperature compensated for rated accuracy from 0° to 50° C (32° to 122°F)
and 4410-20 through -27 from 20° C to 30° C(68° to 86°F)
Over-Range To 120% of nominal full scale
Protection (i.e. 12 W, 120 W, 1200 W, or 12,000 W). No damage or degradation
to the unit will result, regardless of the Range Selector Switch position.
Connectors QC Type (Female N normally supplied)
Finish Gray powder coat
Nominal Size 6 7/8" H x 5 1/8" W x 3 5/8" D,
(includes connectors) (175 mm x 130 mm x 92 mm)
Weight 4410: 3 lbs. (1.4 kg), 4412: 3 1/3 lbs. (1.5 kg)
Elements Tables 9, 9A, 10, 11, 12 (below)
Accessories Case (page 39), spare battery (page 38)
4410 Elements
VARIABLE RF TAP 4431 — Portable Wattmeter
Power and 5 kW max. 2 to 30 MHz,
Frequency Range 1 kW max. 30 to 1000 MHz**
using Bird Plug-in Elements*
Insertion VSWR with N Connectors 1.07 max.** to 1000 MHz
Accuracy ±5% of full scale
Insertion Loss 0.1 dB max (2-512 MHz),
0.2 dB max (512-1000 MHz)*
RF Sample Output Variable – 15 to – 70 dB from BNC (Female) port
Connectors QC Type (Female N normally supplied)
Finish Gray powder coat
Nominal Size 6 7/8" H x 5 1/8" W x 3 5/8" D,
(includes connectors) (175 mm x 130 mm x 92 mm)
Weight 3 1/2 lbs. (1.6 kg)
Elements Tables 1, 2, 3, 3A, 4, 6 (page 33-34)
(within power/frequency range limits stated above)
Accessories Case (page 39)
Table 9 - Full-Scale Power and Frequency Ranges 0-100, 300 Milliwatts 1, 3, 10, 30 Watts
MODEL 4304A FIXED 25-1000 MHz
5-500 WATT ELEMENT — Portable Wattmeter
Power Ranges 5, 15, 50, 150, 500 W, with no scale limitations
except power limited to 150 W from 800–1000 MHz
Frequency Range 25 MHz to 1.0 GHz
Insertion VSWR 25–521 MHz, 1.05 max.
(with UHF female conn.), 512–1000 MHz, 1.07 max.
Insertion Loss 25–512 MHz, 0.10 dB max with UHF female conn.,
512–1000 MHz range, 0.13 dB max
Accuracy 25–100 MHz, ±7% of full scale, using correction charts.
100–512 MHz, ±6 of full scale, no correction needed.
512–1000 MHz, ±7% of full scale, no correction needed.
Connectors QC Type (Female N normally supplied)
Finish Light Gray powder coat
Nominal Size 6 7/8" H x 5 1/8" W x 3 5/8" D,
(includes connectors) (175 mm x 130 mm x 92 mm)
Weight 3 lbs. (1.36 kg)
Accessories Case (page 39)
MHz
Model
30-50
4410-20
50-88
4410-21
88-108
4410-27
100-152
4410-22
150-250
4410-23
225-400
4410-24
400-800
4410-25
800-900
4410-26
900-1000
4410-28
Table 9A - Full-Scale Power and Frequency Ranges 0-100, 300 Milliwatts 1, 3, 10, 30 Watts
MHz
Model
Accuracy
864-868
4410-38
±10% of reading accuracy on 100 mW,
300mW and 1 W, ±5% on all other scales
917-970
4410-29
±5% 10 mW to 1 W only
Table 10 - Full-Scale Power and Frequency Ranges 0-100, 300 Milliwatts 1, 3, 10, 30 Watts
MHz
Model
25-80
4410-10
50-125
4410-11
100-250
4410-12
200-500
4410-13
400-1000
4410-14
1000-1800
4410-15*
1800-2300
4410-16*
Table 11 - Full-Scale Power and Frequency Ranges 0-1, 3, 10, 30, 100, 300, 1000 Watts
MHz
2–30
25-80
50-200
144-520
200-1000
Model
4410-3
4410-5
4410-6
4410-7
4410-8
Table 12 - Full-Scale Power and Frequency Ranges 0-10, 30, 100, 300, 1000, 3000, 10,000 Watts
MHz
0.2-0.535
0.45-2.5
2–30
Model
4410-1
4410-2
4410-4
*Accuracy is ±8% of reading
**Applies only when coupling is less than 30 dB
*Quoted accuracy only when used with other Bird Products
13
Bird® Electronic Corporation 1-866-695-4569 www.bird-electronic.com
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
www.bird-electronic.com 1-866-695-4569 Bird® Electronic Corporation
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
14
Thruline®RF
RFDirectional
DirectionalWattmeters
Wattmeters
Thruline® RF Directional Wattmeters
2-512 MHz With Sampler Port
MODEL 4527 — Panel-Mount Wattmeters
Power Range 100 mW to 10 kW using Bird Plug-in Elements*
Frequency Range 2 to 512MHz (depending on element)
Insertion VSWR with N Connectors 1.05 max. to 512 MHz
Accuracy ±5% of full scale
RF Sample Output Fixed at -53 dB from 512 to 10 MHz,
decreasing to -70 dB at 2 MHz BNC (Female) port
Connectors QC Type (Female N normally supplied)
Finish Gray powder coat
Nominal Size 19" W x 5 7/32" H x 1 11/16" D
(483 mm x 133 mm x 43 mm)
Weight 3 1/2 lbs. (1.6 kg)
Elements 2 to 512 MHz models within Tables 1, 2, 6 (pages 33-34)
MODEL APM-16 AVERAGE-READING POWER METER — Portable Wattmeters
Power Range 1 W to 1000 W
Frequency Range 2 MHz to 2.3 GHz
Accuracy 10° to 35° C ±4% reading, ±1% full scale,
–20° to 50° C ±6% reading, ±2% full scale
Peak/Avg. Ratio In excess of 10 dB
Insertion VSWR (with N connector) 1.05 max. to 1000 MHz
Setting Time < 1 second
Meter Shock mounted, linear scale with expanded scales of 25, 50
and 100 for full scale 1 to 1000 W readings.
Mirrored scale includes 5% overrange.
Temp. Ranges –20° to 50° C operating; –25° to 65° C storage
Humidity 95% ±5% max. (noncondensing)
Battery Internal 9 volt
Connectors QC type (Female N normally supplied)
Nominal Size 6 7/8" H x 5 1/8" W x 3 5/8" D, (175 mm x 130 mm x 92 mm)
Weight 3 lbs. (1.4 kg)
Elements Special APM Series (below)
Recommended Accessories Case (page 39)
100 mW - 10 kW Wattcher®
MODEL 3128A — Wattcher® RF Monitoring System
Power Range 100 mW to 10 kW using Bird Plug-in Elements*
Frequency Range 450 kHz to 2.7 GHz
Accuracy ±5% of full scale
Meter Scales FWD and RFL 25, 50, 100 W
Meter Sensitivity 30 µA/1400 Ω
Alarms Front Panel Buzzer and red LED
Front Panel Controls Reset push-button, reflected power limit
display button, adjust alarm level recessed screw
Rear Panel Features FWD/RFL DC signal inputs (BNC), DC power/remote
reset connector, DPDT interlock relay connector,
fail-safe/nonfail-safe selector, alarm buzzer disable,
AC line voltage selector, safety fuses
and IEC 320 AC receptacle.
Cable Includes two 25 ft. DC cables
AC Power 115/230 VAC, 50/60 Hz @ 0.125A
DC Power 9 - 16 VDC @ 1A
Finish Gray powder coat
Nominal Size 19" W x 5 7/32" H x 3 3/4" D
(483 mm x 133 mm x 95 mm)
Weight 5 lbs. (2.28 kg)
Required Products Line Section: 4230-053 or 4522-002-5 from (page 18)
QC connectors: Two from (page 37)
Elements: Two from Tables 1, 2, 3, 3A, 4,
or 6 (pages 33-34)
APM-16 Elements
Frequency Bands (MHz)
Power Range 2-30
1W
2.5W
5W
10 W
25 W
50 W
100 W
250 W
500 W
1000 W
—
—
APM-5H
APM-10H
—
—
APM-100H
APM-250H
APM-500H
APM-1000H
25-60
50-125
100-250
200-500
400-1000
950-1260
—
—
APM-5A
APM-10A
—
—
APM-100A
APM-250A
—
—
APM-1B
APM-2.5B
APM-5B
APM-10B
APM-25B
—
APM-100B
APM-250B
APM-500B
APM-1000B
APM-1C
—
APM-5C
APM-10C
APM-25C
APM-50C
APM-100C
APM-250C
APM-500C
APM-1000C
—
APM-2.5D
APM-5D
APM-10D
APM-25D
APM-50D
APM-100D
APM-250D
APM-500D
—
APM-1E
APM-2.5E
APM-5E
APM-10E
APM-25E
APM-50E
APM-100E
APM-250E
APM-500E
APM-1000E
APM-1J
APM-2.5J
APM-5J
APM-10J
—
APM-50J
APM-100J
—
—
—
1100-1800 2200-2300
—
APM-2.5K
APM-5K
APM-10K
APM-25K
APM-50K
—
—
—
—
0.45 - 2700 MHz, Model 4521, 4522, and 4526 — Panel-Mount Wattmeters
Models 4521, 4522, 4526
Power Range 100 mW to 10 kW using Bird Plug-in Elements
Frequency Range 450 kHz to 2.7 Ghz (depending on element)
Insertion VSWR with N Connectors 1.05 max. to 1000 MHz
Accuracy ±5% of full scale
Connectors QC Type (Female N normally supplied)
Finish Gray powder coat
Nominal Size 19" W x 5 7/32" H x 1 11/16" D (483 mm x 133 mm x 43 mm)
Weight 3 1/2 lbs. (1.6 kg)
Elements Tables 1, 2, 3, 3A, 4, 6 (pages 33-34)
*Applies only when coupling is less than 30 dB
**Quoted accuracy only when used with other Bird Products
15
Bird® Electronic Corporation 1-866-695-4569 www.bird-electronic.com
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
APM-1M
—
—
—
—
—
—
—
—
—
High Speed, FWD/RFL Alarm Wattcher®
MODEL 3170A — Wattcher® RF Monitoring System
Power Range
Frequency Range
Insertion VSWR
100 mW to 10 kW using Bird Plug-in Elements*
450 kHz to 2.7 Ghz
with N connectors 1.05 max. to 1000 MHz,
1.1 max. to 2700 MHz
Accuracy ±5% of full scale
Meter Scales FWD and RFL 25, 50, 100 W
Alarms Front Panel Buzzer,
"Active" and "Trip" LEDs for forward/reflected
Response Time 25 µs max.
Activate Forward 73 µs to 50 ms nominal (adjustable) monitor delay
Front Panel Controls Reset push-button, adjust FWD/RFL
alarm levels screw, element sockets
Rear Panel Features DC FWD/RFL signal inputs, main and remote meter
drive outputs, external 12-16 VDC supply
input, alarm in/out, reset in/out,
AC line voltage selector, fuse, IEC 320 AC receptacle.
Inputs/Outputs TTL compatible +5 V logic. Outputs for remote meter
AC Power 115/230 VAC, 50/60 Hz @ 56 mA
DC Power 12.7 to 16.0 VDC @ 400 mA max.
Connectors QC Type (Female N normally supplied)
Finish Gray powder coat
Nominal Size 19" W x 5 7/32" H x 9 5/16" D
(483 mm x 133 mm x 237 mm)
Weight 7 lbs. (3.2 kg)
Required Products Elements: Two from Tables 1, 2, 3, 3A, 4,
or 6 (pages 33-34)
Rugged, PEP RF Power Analyst®
MODEL 4391A — Portable Wattmeter
Power Range 100 mW to 10 kW using Bird Plug-in Elements*
Frequency Range 450 kHz to 2.7 Ghz
Insertion VSWR with N connectors 1.05 max. to 1000 MHz
Accuracy Power Readings: ±5% of full scale CW, ±8% PEP
VSWR: ±10% of reading
% Modulation: (CW power 1/3 or more of full scale)
±5% (0-90%), ±10% (90-100%)
Usable Over-range to 120% of scale (CW, PEP, SWR and Return Loss)
Sampling Rate 2 to 3 readings per second
Display 3 1/2 digit, 0.3" LED strobed
Modulation 25 to 10,000 Hz (Audio)
Frequency
Pulse Parameters (min.) Pulse width 0.8 µs (100-2700 MHz),
1.5 µs (26-99 MHz) and 15 µs (2-25 MHz)
Repetition Rate 25 PPS, and Duty Factor 1 x 10¯4
Return Loss ±0.3 dB to corresponding SWR value
Battery Life 8 hours (rechargeable)
AC Power 100-130/200-260 V, 50/60 Hz, 6 W
Connectors QC Type (Female N normally supplied)
Finish Blue vinyl with silver anodized side panels
Nominal Size 9 9/16" L x 5 7/32" W x 4 5/16" H
(includes connectors) (243 mm x 158 mm x 110 mm)
Weight 5 3/4 lbs. (2.6 kg)
Elements Select two elements in a 10:1 power ratio
from Tables 1, 2, 3, 3A, 4, 5, 6 and 14 (pages 33-34)
Accessories Case (page 39), Bus Interface Units (page 17)
*Quoted accuracy only when used with other Bird products.
www.bird-electronic.com 1-866-695-4569 Bird® Electronic Corporation
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
16
Thruline®RF
RFDirectional
DirectionalWattmeters
Wattmeters
Thruline® RF Directional Wattmeters
2-512 MHz With Sampler Port
MODEL 4527 — Panel-Mount Wattmeters
Power Range 100 mW to 10 kW using Bird Plug-in Elements*
Frequency Range 2 to 512MHz (depending on element)
Insertion VSWR with N Connectors 1.05 max. to 512 MHz
Accuracy ±5% of full scale
RF Sample Output Fixed at -53 dB from 512 to 10 MHz,
decreasing to -70 dB at 2 MHz BNC (Female) port
Connectors QC Type (Female N normally supplied)
Finish Gray powder coat
Nominal Size 19" W x 5 7/32" H x 1 11/16" D
(483 mm x 133 mm x 43 mm)
Weight 3 1/2 lbs. (1.6 kg)
Elements 2 to 512 MHz models within Tables 1, 2, 6 (pages 33-34)
MODEL APM-16 AVERAGE-READING POWER METER — Portable Wattmeters
Power Range 1 W to 1000 W
Frequency Range 2 MHz to 2.3 GHz
Accuracy 10° to 35° C ±4% reading, ±1% full scale,
–20° to 50° C ±6% reading, ±2% full scale
Peak/Avg. Ratio In excess of 10 dB
Insertion VSWR (with N connector) 1.05 max. to 1000 MHz
Setting Time < 1 second
Meter Shock mounted, linear scale with expanded scales of 25, 50
and 100 for full scale 1 to 1000 W readings.
Mirrored scale includes 5% overrange.
Temp. Ranges –20° to 50° C operating; –25° to 65° C storage
Humidity 95% ±5% max. (noncondensing)
Battery Internal 9 volt
Connectors QC type (Female N normally supplied)
Nominal Size 6 7/8" H x 5 1/8" W x 3 5/8" D, (175 mm x 130 mm x 92 mm)
Weight 3 lbs. (1.4 kg)
Elements Special APM Series (below)
Recommended Accessories Case (page 39)
100 mW - 10 kW Wattcher®
MODEL 3128A — Wattcher® RF Monitoring System
Power Range 100 mW to 10 kW using Bird Plug-in Elements*
Frequency Range 450 kHz to 2.7 GHz
Accuracy ±5% of full scale
Meter Scales FWD and RFL 25, 50, 100 W
Meter Sensitivity 30 µA/1400 Ω
Alarms Front Panel Buzzer and red LED
Front Panel Controls Reset push-button, reflected power limit
display button, adjust alarm level recessed screw
Rear Panel Features FWD/RFL DC signal inputs (BNC), DC power/remote
reset connector, DPDT interlock relay connector,
fail-safe/nonfail-safe selector, alarm buzzer disable,
AC line voltage selector, safety fuses
and IEC 320 AC receptacle.
Cable Includes two 25 ft. DC cables
AC Power 115/230 VAC, 50/60 Hz @ 0.125A
DC Power 9 - 16 VDC @ 1A
Finish Gray powder coat
Nominal Size 19" W x 5 7/32" H x 3 3/4" D
(483 mm x 133 mm x 95 mm)
Weight 5 lbs. (2.28 kg)
Required Products Line Section: 4230-053 or 4522-002-5 from (page 18)
QC connectors: Two from (page 37)
Elements: Two from Tables 1, 2, 3, 3A, 4,
or 6 (pages 33-34)
APM-16 Elements
Frequency Bands (MHz)
Power Range 2-30
1W
2.5W
5W
10 W
25 W
50 W
100 W
250 W
500 W
1000 W
—
—
APM-5H
APM-10H
—
—
APM-100H
APM-250H
APM-500H
APM-1000H
25-60
50-125
100-250
200-500
400-1000
950-1260
—
—
APM-5A
APM-10A
—
—
APM-100A
APM-250A
—
—
APM-1B
APM-2.5B
APM-5B
APM-10B
APM-25B
—
APM-100B
APM-250B
APM-500B
APM-1000B
APM-1C
—
APM-5C
APM-10C
APM-25C
APM-50C
APM-100C
APM-250C
APM-500C
APM-1000C
—
APM-2.5D
APM-5D
APM-10D
APM-25D
APM-50D
APM-100D
APM-250D
APM-500D
—
APM-1E
APM-2.5E
APM-5E
APM-10E
APM-25E
APM-50E
APM-100E
APM-250E
APM-500E
APM-1000E
APM-1J
APM-2.5J
APM-5J
APM-10J
—
APM-50J
APM-100J
—
—
—
1100-1800 2200-2300
—
APM-2.5K
APM-5K
APM-10K
APM-25K
APM-50K
—
—
—
—
0.45 - 2700 MHz, Model 4521, 4522, and 4526 — Panel-Mount Wattmeters
Models 4521, 4522, 4526
Power Range 100 mW to 10 kW using Bird Plug-in Elements
Frequency Range 450 kHz to 2.7 Ghz (depending on element)
Insertion VSWR with N Connectors 1.05 max. to 1000 MHz
Accuracy ±5% of full scale
Connectors QC Type (Female N normally supplied)
Finish Gray powder coat
Nominal Size 19" W x 5 7/32" H x 1 11/16" D (483 mm x 133 mm x 43 mm)
Weight 3 1/2 lbs. (1.6 kg)
Elements Tables 1, 2, 3, 3A, 4, 6 (pages 33-34)
*Applies only when coupling is less than 30 dB
**Quoted accuracy only when used with other Bird Products
15
Bird® Electronic Corporation 1-866-695-4569 www.bird-electronic.com
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
APM-1M
—
—
—
—
—
—
—
—
—
High Speed, FWD/RFL Alarm Wattcher®
MODEL 3170A — Wattcher® RF Monitoring System
Power Range
Frequency Range
Insertion VSWR
100 mW to 10 kW using Bird Plug-in Elements*
450 kHz to 2.7 Ghz
with N connectors 1.05 max. to 1000 MHz,
1.1 max. to 2700 MHz
Accuracy ±5% of full scale
Meter Scales FWD and RFL 25, 50, 100 W
Alarms Front Panel Buzzer,
"Active" and "Trip" LEDs for forward/reflected
Response Time 25 µs max.
Activate Forward 73 µs to 50 ms nominal (adjustable) monitor delay
Front Panel Controls Reset push-button, adjust FWD/RFL
alarm levels screw, element sockets
Rear Panel Features DC FWD/RFL signal inputs, main and remote meter
drive outputs, external 12-16 VDC supply
input, alarm in/out, reset in/out,
AC line voltage selector, fuse, IEC 320 AC receptacle.
Inputs/Outputs TTL compatible +5 V logic. Outputs for remote meter
AC Power 115/230 VAC, 50/60 Hz @ 56 mA
DC Power 12.7 to 16.0 VDC @ 400 mA max.
Connectors QC Type (Female N normally supplied)
Finish Gray powder coat
Nominal Size 19" W x 5 7/32" H x 9 5/16" D
(483 mm x 133 mm x 237 mm)
Weight 7 lbs. (3.2 kg)
Required Products Elements: Two from Tables 1, 2, 3, 3A, 4,
or 6 (pages 33-34)
Rugged, PEP RF Power Analyst®
MODEL 4391A — Portable Wattmeter
Power Range 100 mW to 10 kW using Bird Plug-in Elements*
Frequency Range 450 kHz to 2.7 Ghz
Insertion VSWR with N connectors 1.05 max. to 1000 MHz
Accuracy Power Readings: ±5% of full scale CW, ±8% PEP
VSWR: ±10% of reading
% Modulation: (CW power 1/3 or more of full scale)
±5% (0-90%), ±10% (90-100%)
Usable Over-range to 120% of scale (CW, PEP, SWR and Return Loss)
Sampling Rate 2 to 3 readings per second
Display 3 1/2 digit, 0.3" LED strobed
Modulation 25 to 10,000 Hz (Audio)
Frequency
Pulse Parameters (min.) Pulse width 0.8 µs (100-2700 MHz),
1.5 µs (26-99 MHz) and 15 µs (2-25 MHz)
Repetition Rate 25 PPS, and Duty Factor 1 x 10¯4
Return Loss ±0.3 dB to corresponding SWR value
Battery Life 8 hours (rechargeable)
AC Power 100-130/200-260 V, 50/60 Hz, 6 W
Connectors QC Type (Female N normally supplied)
Finish Blue vinyl with silver anodized side panels
Nominal Size 9 9/16" L x 5 7/32" W x 4 5/16" H
(includes connectors) (243 mm x 158 mm x 110 mm)
Weight 5 3/4 lbs. (2.6 kg)
Elements Select two elements in a 10:1 power ratio
from Tables 1, 2, 3, 3A, 4, 5, 6 and 14 (pages 33-34)
Accessories Case (page 39), Bus Interface Units (page 17)
*Quoted accuracy only when used with other Bird products.
www.bird-electronic.com 1-866-695-4569 Bird® Electronic Corporation
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
16
Thruline® RF Directional Wattmeters
Thruline® RF Directional Wattmeters
BUS INTERFACE UNITS, MODEL 4380A-488
Output 3 1/2 digit ASCII format
Logic Levels Meets all IEEE standards 488-1978 specifications
GPIB Capabilities Supports AH1, SH1, T5, L4 SR1, RL0,
PP0, DC1, DT1, C0 AND E1
Environment Operating temperature range 0°C to +50°C
Storage temperature range -40°C to +100°C
AC Power 100-130/200-260 Vac, 50/60 Hz
Dimensions 5 3/8" L x 3 1/4" W x 10 1/2" H
and Weight (137 mm x 82 mm x 267 mm); 2 lbs. 10 oz. (1.2kg)
Output Connector 24-pin IEEE-488 standard connector
Cable supplied 20 in. interconnecting cable to RF POWER ANALYST®
Optional Cables 3 1/4 ft. (I m) IEEE-488 bus interface cable,
Bird P/N 5-1317-1
6 1/2 ft. (2m) IEEE-488 bus interface cable,
Bird P/N 5-1317-2
Use of longer bus interface cables
is not recommended.
BUS INTERFACE UNITS, MODEL 4380A-232
Output 3 1/2 digit ASCII format
Logic Levels Meets all EIA standard RS-232C specifications
Environment Operating temperature range 0°C to +50°C
Storage temperature range -40°C to +100°C
AC Power 100-130/200-260 Vac, 50/60 Hz
Dimensions and 5 3/8" L x 3 1/4" W x 10 1/2" H
Weight (137 mm x 82 mm x 267 mm); 2 lb. 10 oz. (1.2kg)
Output Connector Standard 25-pin subminiature D style RS-232
Cable supplied 20 in. interconnecting cable to RF POWER ANALYST®
Optional Cables 5 ft. (1.5 m) RS-232 bus interface cable,
Bird P/N 5-1662-1
10 ft. (3 m) RS-232 bus interface cable,
Bird P/N 5-1662-2
FIELD-STRENGTH ELEMENT AND METER MODELS 4030, 4041
4030
Frequency Range
1 to 1000 MHz
Dynamic Range
30 dB min.
Typical Sensitivity
Full Scale deflection at 8 ft. (2 1/2 m)
from a 1 W source broadcasting
at 150 MHz through a quarter wave antenna
Output Characteristics
Compatible with 30 µA meter instruments
(Models 43, 43P, 4305A, 4314B, 4410, 4430,
4431, 4521, 4522, 4526, 4527)
Battery Life
100 hours min.
Battery Type Three, 3V Lithium-Manganese Dioxide, cells
(Duracell DL2032 or equivalent)
Ambient Temp Range
0°C to +50°C
Nominal Size
—
Weight
(includes batteries) 3 oz.
THRULINE® WATTMETER COMPONENTS METER MOVEMENT 30µA
8-000
Type 3 1/2" Round Kit w/ Cable
Current 30 µA/1400 Ω
Scales 25/50/100W
Use with Element Tables 1, 2, 3, 3A, 4, 6 (pages 33-34)
VARIABLE RF SIGNAL SAMPLERS, MODEL 4273, 4275
4273
Power Rating
5 kW max
Frequency Range
1.5 - 35 MHz
Impedance
50 ohms nominal
Insertion VSWR
with N Connectors 1.07 max
Insertion Loss
Coupling
Ambient
Temperature Range
Connectors
Finish
Nominal Size
Weight
17
0.1 dB max.
Adjustable as shown within ±3 dB
4275
1 kW max
20 - 1000 MHz
50 ohms nominal
with N Connectors 1.1 max
2 to 512 MHz, 1.25 max. 512 to 1000 MHz
0.1 dB max. 2 to 512 MHz,
0.2 dB max 512 to 1000 MHz
—
-40°C to +45°C
QC Type (Choose any two connectors from page 37)
Bright silver plate
2 51/64" L x 2 7/8" W x 1 1/4" D, (71 mm x 73 x 32 mm)
10 oz. (280 g)
Bird® Electronic Corporation 1-866-695-4569 www.bird-electronic.com
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
4041
1 to 1000 MHz
30 dB min.
Full Scale deflection at 8 ft.
(2 1/2 m) from a 1 W source broadcasting
at 150 MHz through a quarter wave antenna
—
200 hours min.
One, 9V alkaline, "Transistor" battery
(NEDA No. 1604A)
0°C to +50°C
(w/o antenna) 4 3/8" L x 2 1/4" W x 1 15/16" D,
(111mm x 57mm x 49mm)
(includes batteries) 10 oz. (283 g)
4210A100
3 1/4" Square Meter in Housing
30 µA/1400 Ω
25/50/100W
1, 2, 3, 3A, 4, 6 (pages 33-34)
THRULINE® WATTMETER COMPONENTS— Line Sections Cable 7/8" Rigid Line
Model 4230-018 4230-006-1
4230-059
4230-053
Line Type*
Cable
Cable
Cable
Cable
Connector Type
QC-N(F)
QC(not incld.) QC(not incld.)
QC(not incld.)
Element Sockets
1
1
1 w/bracket
2
Length (Inches)
5 1/2
4
4
4
Weight (lbs.)
1 1/3
1
1 1/4
1
Use with Wattmeters
3128,
4201A501,
—
—
—
4201A502,
4201A100,
8-000
4522-002-5
Cable
QC(not incld.)
2 panel mt.
6 7/32
1 1/4
3128,
4201A501,
4201A502,
4201A100,
8-000
4501-000
7/8"
Flg.
1
4
1
—
4502-000
7/8"
Flg.
2
4
1 1/4
3128,
4201A501,
4201A502,
4201A100,
8-000
www.bird-electronic.com 1-866-695-4569 Bird® Electronic Corporation
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
18
Thruline® RF Directional Wattmeters
Thruline® RF Directional Wattmeters
BUS INTERFACE UNITS, MODEL 4380A-488
Output 3 1/2 digit ASCII format
Logic Levels Meets all IEEE standards 488-1978 specifications
GPIB Capabilities Supports AH1, SH1, T5, L4 SR1, RL0,
PP0, DC1, DT1, C0 AND E1
Environment Operating temperature range 0°C to +50°C
Storage temperature range -40°C to +100°C
AC Power 100-130/200-260 Vac, 50/60 Hz
Dimensions 5 3/8" L x 3 1/4" W x 10 1/2" H
and Weight (137 mm x 82 mm x 267 mm); 2 lbs. 10 oz. (1.2kg)
Output Connector 24-pin IEEE-488 standard connector
Cable supplied 20 in. interconnecting cable to RF POWER ANALYST®
Optional Cables 3 1/4 ft. (I m) IEEE-488 bus interface cable,
Bird P/N 5-1317-1
6 1/2 ft. (2m) IEEE-488 bus interface cable,
Bird P/N 5-1317-2
Use of longer bus interface cables
is not recommended.
BUS INTERFACE UNITS, MODEL 4380A-232
Output 3 1/2 digit ASCII format
Logic Levels Meets all EIA standard RS-232C specifications
Environment Operating temperature range 0°C to +50°C
Storage temperature range -40°C to +100°C
AC Power 100-130/200-260 Vac, 50/60 Hz
Dimensions and 5 3/8" L x 3 1/4" W x 10 1/2" H
Weight (137 mm x 82 mm x 267 mm); 2 lb. 10 oz. (1.2kg)
Output Connector Standard 25-pin subminiature D style RS-232
Cable supplied 20 in. interconnecting cable to RF POWER ANALYST®
Optional Cables 5 ft. (1.5 m) RS-232 bus interface cable,
Bird P/N 5-1662-1
10 ft. (3 m) RS-232 bus interface cable,
Bird P/N 5-1662-2
FIELD-STRENGTH ELEMENT AND METER MODELS 4030, 4041
4030
Frequency Range
1 to 1000 MHz
Dynamic Range
30 dB min.
Typical Sensitivity
Full Scale deflection at 8 ft. (2 1/2 m)
from a 1 W source broadcasting
at 150 MHz through a quarter wave antenna
Output Characteristics
Compatible with 30 µA meter instruments
(Models 43, 43P, 4305A, 4314B, 4410, 4430,
4431, 4521, 4522, 4526, 4527)
Battery Life
100 hours min.
Battery Type Three, 3V Lithium-Manganese Dioxide, cells
(Duracell DL2032 or equivalent)
Ambient Temp Range
0°C to +50°C
Nominal Size
—
Weight
(includes batteries) 3 oz.
THRULINE® WATTMETER COMPONENTS METER MOVEMENT 30µA
8-000
Type 3 1/2" Round Kit w/ Cable
Current 30 µA/1400 Ω
Scales 25/50/100W
Use with Element Tables 1, 2, 3, 3A, 4, 6 (pages 33-34)
VARIABLE RF SIGNAL SAMPLERS, MODEL 4273, 4275
4273
Power Rating
5 kW max
Frequency Range
1.5 - 35 MHz
Impedance
50 ohms nominal
Insertion VSWR
with N Connectors 1.07 max
Insertion Loss
Coupling
Ambient
Temperature Range
Connectors
Finish
Nominal Size
Weight
17
0.1 dB max.
Adjustable as shown within ±3 dB
4275
1 kW max
20 - 1000 MHz
50 ohms nominal
with N Connectors 1.1 max
2 to 512 MHz, 1.25 max. 512 to 1000 MHz
0.1 dB max. 2 to 512 MHz,
0.2 dB max 512 to 1000 MHz
—
-40°C to +45°C
QC Type (Choose any two connectors from page 37)
Bright silver plate
2 51/64" L x 2 7/8" W x 1 1/4" D, (71 mm x 73 x 32 mm)
10 oz. (280 g)
Bird® Electronic Corporation 1-866-695-4569 www.bird-electronic.com
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
4041
1 to 1000 MHz
30 dB min.
Full Scale deflection at 8 ft.
(2 1/2 m) from a 1 W source broadcasting
at 150 MHz through a quarter wave antenna
—
200 hours min.
One, 9V alkaline, "Transistor" battery
(NEDA No. 1604A)
0°C to +50°C
(w/o antenna) 4 3/8" L x 2 1/4" W x 1 15/16" D,
(111mm x 57mm x 49mm)
(includes batteries) 10 oz. (283 g)
4210A100
3 1/4" Square Meter in Housing
30 µA/1400 Ω
25/50/100W
1, 2, 3, 3A, 4, 6 (pages 33-34)
THRULINE® WATTMETER COMPONENTS— Line Sections Cable 7/8" Rigid Line
Model 4230-018 4230-006-1
4230-059
4230-053
Line Type*
Cable
Cable
Cable
Cable
Connector Type
QC-N(F)
QC(not incld.) QC(not incld.)
QC(not incld.)
Element Sockets
1
1
1 w/bracket
2
Length (Inches)
5 1/2
4
4
4
Weight (lbs.)
1 1/3
1
1 1/4
1
Use with Wattmeters
3128,
4201A501,
—
—
—
4201A502,
4201A100,
8-000
4522-002-5
Cable
QC(not incld.)
2 panel mt.
6 7/32
1 1/4
3128,
4201A501,
4201A502,
4201A100,
8-000
4501-000
7/8"
Flg.
1
4
1
—
4502-000
7/8"
Flg.
2
4
1 1/4
3128,
4201A501,
4201A502,
4201A100,
8-000
www.bird-electronic.com 1-866-695-4569 Bird® Electronic Corporation
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
18
Thruline® RF Directional Wattmeters
Thruline® RF Directional Wattmeters
THRULINE® WATTMETER COMPONENTS— Rigid Line Sections
HIGH SPEED, FWD/RFL ALARM WATTCHER MODEL 3171A — RF Monitoring System
Models
3171A
3171A-020
Power Range
100 W to 250 kW using Bird Plug-in Elements*
Frequency Range
2 MHz to 1 Ghz
Accuracy
±5% of full scale
Meter Scales
FWD and RFL 5, 10, 25 kW
FWD and RFL 15, 30, 60 kW
Alarms
Front Panel Buzzer, "Active" and "Trip" LEDs for forward/reflected
Response Time
25 µs max.
Activate Forward
73 µs to 50 ms nominal (adjustable) Monitor Delay
Front Panel Controls
Reset push-button, adjust FWD/RFL alarm levels screw
Rear Panel Features
DC FWD/RFL signal inputs, main and remote meter drive outputs,
external 12-16 VDC supply input, alarm in/out, reset in/out,
AC line voltage selector, fuse, IEC 320 AC receptacle.
Inputs/Outputs
TTL compatible +5 V logic. Outputs for remote meter
Cable
Includes two 25 ft. DC cables
AC Power
115/230 V, 50/60 Hz @ 56 mA max.
DC Power
12.7 to 16.0 VDC @ 400 mA max.
Finish
Gray powder coat
Nominal Size
19" W x 5 7/32" H x 9 21/64" D (483 mm x 133 mm x 237 mm)
Weight
5 1/2 lbs. (2.5 kg)
Required Products
Line Section: 1 5/8", 3 1/8", 4 1/16", 6 1/8" from page 20
Elements (pages 35-36):
Elements (pages 35-36 ):
Two from Tables 1 5/8 AA,
Two from Tables 1 5/8 BB,
3 1/8 AA, 4 1/16 AA, or 6 1/8 AA.
3 1/8 BB, 4 1/16 BB, or 6 1/8 BB.
Cable: If length other than 25 ft. is desired, order two BNC (M) cables from page 38
Model
Line Size
Connector Type
Element Sockets
Length (Inches)
Weight (Lbs.)
4715-000
4723-000
1 5/8"
1 5/8"
EIA Flg.
UnFlg. (Rec. 0.438")
2
2
6.75
6.38
3.25
1.5
4610-000
4801-100
4802-000
3 1/8"
3 1/8"
3 1/8"
EIA Flg.
UnFlg. (Rec. 0.688")
UnFlg. (Flush)
2
2
2
7.03
6.5
6.5
7.25
4.25
4.25
4642-000
4844-000
4 1/16"
4 1/16"
EIA Flg.
UnFlg. (Rec. 0.531")
2
2
8.38
7.5
8.88
2.88
4905-000
4909-000
6 1/8"
6 1/8"
EIA Flg.
UnFlg. (Rec. 0.968")
2
2
10.22
9.63
17
12.75
®
100 W — 250 kW WATTCHER® MODELS 3126A, 3127A — RF Monitoring System
Models
3126A
3127A
Power Range
300 W to 60 kW using
100 W to 250 kW using
Bird Plug-in Elements*
Bird Plug-in Elements*
Frequency Range
2 MHz to 1 Ghz
Accuracy
±5% of full scale
Meter Scales FWD
15, 30, 60 kW
5, 10, 25 kW
Meter Scales RFL
1.5, 3, 6 kW
1, 2.5, 5 kW
Meter Sensitivity
100 µA/3000 Ω
Alarms
Front panel buzzer and red LED
Front Panel Controls
Reset push-button, reflected power limit display button, adjust alarm level recessed screw
Rear Panel Features
FWD/RFL DC signal inputs (BNC), DC power/remote reset connector, DPDT interlock
relay connector, fail-safe/nonfail-safe selector, alarm buzzer disable,
AC line voltage selector, safety fuses and IEC 320 AC receptacle.
Cable
Includes two 25 ft. DC cables
AC Power
115/230 V, 50/60 Hz @ 0.125 A max.
DC Power
9 to 16 V @ 1 A max.
Finish
Gray powder coat
Nominal Size
19" W x 5 7/32" H x 3 3/4" D (483 mm x 133 mm x 95 mm)
Weight
5 lbs. (2.28 kg)
Required Products
Line Section: 1 5/8", 3 1/8", 4 1/16", 6 1/8" from page 20
Elements (pages 35-36):
Elements (pages 35-36):
Two from Tables 1 5/8 B,
Two from Tables 1 5/8 A,
3 1/8 B, 4 1/16 B, or 6 1/8 B.
3 1/8 A, 4 1/16 A, or 6 1/8 A.
Cable: If length other than 25 ft. is desired, order two BNC (M) cables from page 38
19
Bird® Electronic Corporation 1-866-695-4569 www.bird-electronic.com
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
Model 3127-040
Model 6810 Series
THRULINE® WATTMETER COMPONENTS METERS — Rigid Line Use
Model
Type
Scales
DC Cable (ft.)
Uses Line Section
3127-040
Dual 4 1/2" rectangular
on panel
5/10/25 kW
25
Double socket
3127-075
Dual 4 1/2" rectangular
on panel
15/30/60 kW
25
Double socket
6810-265
4 1/2" rectangular
in housing
8/80 kW
10
Single Socket
6810-307
4 1/2" rectangular
in housing
15/30/60 kW
10
Single Socket
6810-309-7
4 1/2" rectangular
in housing
5/10/25 kW
10
Single Socket
www.bird-electronic.com 1-866-695-4569 Bird® Electronic Corporation
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
20
Thruline® RF Directional Wattmeters
Thruline® RF Directional Wattmeters
THRULINE® WATTMETER COMPONENTS— Rigid Line Sections
HIGH SPEED, FWD/RFL ALARM WATTCHER MODEL 3171A — RF Monitoring System
Models
3171A
3171A-020
Power Range
100 W to 250 kW using Bird Plug-in Elements*
Frequency Range
2 MHz to 1 Ghz
Accuracy
±5% of full scale
Meter Scales
FWD and RFL 5, 10, 25 kW
FWD and RFL 15, 30, 60 kW
Alarms
Front Panel Buzzer, "Active" and "Trip" LEDs for forward/reflected
Response Time
25 µs max.
Activate Forward
73 µs to 50 ms nominal (adjustable) Monitor Delay
Front Panel Controls
Reset push-button, adjust FWD/RFL alarm levels screw
Rear Panel Features
DC FWD/RFL signal inputs, main and remote meter drive outputs,
external 12-16 VDC supply input, alarm in/out, reset in/out,
AC line voltage selector, fuse, IEC 320 AC receptacle.
Inputs/Outputs
TTL compatible +5 V logic. Outputs for remote meter
Cable
Includes two 25 ft. DC cables
AC Power
115/230 V, 50/60 Hz @ 56 mA max.
DC Power
12.7 to 16.0 VDC @ 400 mA max.
Finish
Gray powder coat
Nominal Size
19" W x 5 7/32" H x 9 21/64" D (483 mm x 133 mm x 237 mm)
Weight
5 1/2 lbs. (2.5 kg)
Required Products
Line Section: 1 5/8", 3 1/8", 4 1/16", 6 1/8" from page 20
Elements (pages 35-36):
Elements (pages 35-36 ):
Two from Tables 1 5/8 AA,
Two from Tables 1 5/8 BB,
3 1/8 AA, 4 1/16 AA, or 6 1/8 AA.
3 1/8 BB, 4 1/16 BB, or 6 1/8 BB.
Cable: If length other than 25 ft. is desired, order two BNC (M) cables from page 38
Model
Line Size
Connector Type
Element Sockets
Length (Inches)
Weight (Lbs.)
4715-000
4723-000
1 5/8"
1 5/8"
EIA Flg.
UnFlg. (Rec. 0.438")
2
2
6.75
6.38
3.25
1.5
4610-000
4801-100
4802-000
3 1/8"
3 1/8"
3 1/8"
EIA Flg.
UnFlg. (Rec. 0.688")
UnFlg. (Flush)
2
2
2
7.03
6.5
6.5
7.25
4.25
4.25
4642-000
4844-000
4 1/16"
4 1/16"
EIA Flg.
UnFlg. (Rec. 0.531")
2
2
8.38
7.5
8.88
2.88
4905-000
4909-000
6 1/8"
6 1/8"
EIA Flg.
UnFlg. (Rec. 0.968")
2
2
10.22
9.63
17
12.75
®
100 W — 250 kW WATTCHER® MODELS 3126A, 3127A — RF Monitoring System
Models
3126A
3127A
Power Range
300 W to 60 kW using
100 W to 250 kW using
Bird Plug-in Elements*
Bird Plug-in Elements*
Frequency Range
2 MHz to 1 Ghz
Accuracy
±5% of full scale
Meter Scales FWD
15, 30, 60 kW
5, 10, 25 kW
Meter Scales RFL
1.5, 3, 6 kW
1, 2.5, 5 kW
Meter Sensitivity
100 µA/3000 Ω
Alarms
Front panel buzzer and red LED
Front Panel Controls
Reset push-button, reflected power limit display button, adjust alarm level recessed screw
Rear Panel Features
FWD/RFL DC signal inputs (BNC), DC power/remote reset connector, DPDT interlock
relay connector, fail-safe/nonfail-safe selector, alarm buzzer disable,
AC line voltage selector, safety fuses and IEC 320 AC receptacle.
Cable
Includes two 25 ft. DC cables
AC Power
115/230 V, 50/60 Hz @ 0.125 A max.
DC Power
9 to 16 V @ 1 A max.
Finish
Gray powder coat
Nominal Size
19" W x 5 7/32" H x 3 3/4" D (483 mm x 133 mm x 95 mm)
Weight
5 lbs. (2.28 kg)
Required Products
Line Section: 1 5/8", 3 1/8", 4 1/16", 6 1/8" from page 20
Elements (pages 35-36):
Elements (pages 35-36):
Two from Tables 1 5/8 B,
Two from Tables 1 5/8 A,
3 1/8 B, 4 1/16 B, or 6 1/8 B.
3 1/8 A, 4 1/16 A, or 6 1/8 A.
Cable: If length other than 25 ft. is desired, order two BNC (M) cables from page 38
19
Bird® Electronic Corporation 1-866-695-4569 www.bird-electronic.com
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
Model 3127-040
Model 6810 Series
THRULINE® WATTMETER COMPONENTS METERS — Rigid Line Use
Model
Type
Scales
DC Cable (ft.)
Uses Line Section
3127-040
Dual 4 1/2" rectangular
on panel
5/10/25 kW
25
Double socket
3127-075
Dual 4 1/2" rectangular
on panel
15/30/60 kW
25
Double socket
6810-265
4 1/2" rectangular
in housing
8/80 kW
10
Single Socket
6810-307
4 1/2" rectangular
in housing
15/30/60 kW
10
Single Socket
6810-309-7
4 1/2" rectangular
in housing
5/10/25 kW
10
Single Socket
www.bird-electronic.com 1-866-695-4569 Bird® Electronic Corporation
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
20
Termaline® RF Coaxial Terminations
Termaline® RF Coaxial Terminations
Use this Model Number Definition to specify part numbers when ordering T, ST, WT, and CT Series dry loads.
* Termination Model Number Definition:
Power Rating (Watts)
+ Call for custom connector
options not shown in this catalog
100 – T – FN
Product Type
T, WT – Convection-cooled
CT – Conduction-cooled
ST – Square Convection Cooled
Connector Gender
F – Female
M – Male
Connectors+
A – SMA
B – BNC
E – IEC 7/16
N–N
T – TNC
75-T SERIES (75 WATT)
2-T SERIES (2 Watt) and 5-T SERIES (5 Watt)
Connectors BNC, N, TNC
Frequency Range DC to 1 GHz at 1.10:1 max,
and VSWR 1 GHz to 6 GHz at 1.25:1 max.
(N type), 1 GHz to 4 GHz at 1.25:1 max.
(BNC and TNC)
Ambient Temp. –40°C to +40°C
Operating Position Any
Coolant Dry (Convection cooled)
Finish Silver or Tri-alloy plated
Nominal Size (with Male N-type connector): 1.6" L x 0.8" Dia.,
(40.7 mm x 20.4 mm)
Weight 1.9 oz. (55 g)
Also available, 0.5 Watt, SMA Male
0.5-T-MA-A (DC to 12 GHz, 1.25:1 max)
0.5-T-MA-B (DC to 18 GHz, 1.25:1 max)
25-T SERIES (25 Watt)
Connectors BNC, N, TNC, IEC 7/16"
Frequency Range DC to 1 GHz at 1.10:1 max,
and VSWR 1 GHz to 4 GHz at 1.25:1 max.
Ambient Temp. –40°C to +40°C
Operating Position Any
Coolant Dry (Convection cooled)
Finish Black anodized. Silver or Tri-alloy plated connector
Nominal Size (with N-type connector): 4.7" L x 2.3" Dia.,
(119.4 mm x 58.5 mm)
Weight 10.7 oz. (305 g)
50-T Series (50 Watt)
Connectors BNC, N, TNC, IEC 7/16"
Frequency Range DC to 1 GHz at 1.10:1 max,
and VSWR 1 GHz to 4 GHz at 1.25:1 max.
Ambient Temp. –40°C to +40°C
Operating Position Any
Coolant Dry (Convection cooled)
Finish Black anodized. Silver or Tri-alloy plated connector
Nominal Size (with N-type connector): 4.7" L x 2.3" Dia.,
(119.4 mm x 58.5 mm)
Weight 1.13 lbs. (0.52 kg)
** When mounted to a suitable heatsink capable of maintaining a 100°C or lower flange temperature.
21
Bird® Electronic Corporation 1-866-695-4569 www.bird-electronic.com
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
10-T SERIES (10 Watt) & 10-T-MN *
Connectors BNC, N, TNC
Frequency Range DC to 1 GHz at 1.10:1 max,
and VSWR 10-T :1 GHz to 4 GHz at 1.25:1 max.
10-T-MN: DC-2.4 GHz ≤ 1.10:
2.4-6 GHz ≤ 1.15:
6-10GHz ≤ 1.25
Ambient Temp. –40°C to +40°C
Operating Position Any
Coolant Dry (Convection cooled)
Finish Black anodized. Silver or Tri-alloy plated connector
Nominal Size (with N-type connector): 2" L x 2.3" Dia.,
(50.8 mm x 58.5 mm)
Weight 5.1 oz. (146 g)
Connectors
Frequency Range
and VSWR
Ambient Temp.
Operating Position
Coolant
Finish
Nominal Size
Weight
BNC, N, TNC, IEC 7/16
DC to 1 GHz at 1.10:1 max, 1 GHz to 4
GHz at 1.25:1 max.
–40°C to +40°C
Any
Dry (Convection cooled)
Black anodized. Silver or Tri-alloy plated connector
(with N-type connector): 6.7" L x 2.3" Dia.,
(170.2 mm x 58.5 mm)
1.32 lbs. (0.6 kg)
*Also available in 20-T-MN not listed
25-CT-FA, 25 CT-MA (25 Watt)
Power Rating** 25 W max. @ 100°C flange temperature,
derated to 0 W @ 150°C
Connectors SMA
Frequency Range DC to 1 GHz at 1.15:1 max,
and VSWR 1 GHz to 3 GHz at 1.25:1 max.
Operating Position Any
Coolant Dry (Conduction cooled)
Finish Silver or Tri-alloy plated
Nominal Size 0.9" L x 1.0" W x 0.5" H,
(includes connector) (22.9 mm x 25.4 mm x 12.7 mm)
Base to 0.25" (6.4 mm)
Connector Center
Mounting Centers 0.614" (15.6 mm)
Weight 0.4 oz. (11.4 g)
50-CT-FA, 50-CT-MA (50 WATT)
Power Rating** 50 W max. @ 100°C flange temperature,
derated to 0 W @ 150°C
Connectors SMA
Frequency Range DC to 3 GHz at 1.15:1 max,
and VSWR 3 GHz to 6 GHz at 1.25:1 max.
Operating Position Any
Coolant Dry (Conduction cooled)
Finish Silver or Tri-alloy plated
Nominal Size 0.86" L x 0.75" W x 0.39" H,
(includes connector) (21.9 mm x 19.2 mm x 10.0 mm)
Base to 0.162" (4.12 mm)
Connector Center
Mounting Centers 0.52" (13.3 mm)
Weight 1.1 oz. (31.2 g)
100-ST SERIES (100 WATT)
Connectors BNC, N, TNC, IEC 7/16
Frequency Range DC to 1 GHz at 1.10:1 max,
1 GHz to 4 GHz at 1.25:1 max.
Ambient Temp. –40°C to +40°C
Operating Position Any
Coolant Dry (Convection cooled)
Finish Black anodized fins.
Silver or Tri-alloy plated connector
Nominal Size (with N-type connector):
6.95" H x 2.75" W x 2.75" D,
(174 mm x 69.9 mm x 69.9 mm)
Weight 2.62 lbs. (1.20 kg)
150-T SERIES (150 WATT)*
Connectors BNC, N, TNC, IEC 7/16
Frequency Range DC to 1 GHz at 1.10:1 max,
and VSWR 1 GHz to 2.4 GHz at 1.25:1 max.
Ambient Temp. –40°C to +40°C
Operating Position Vertical
Coolant Dry (Convection cooled)
Finish Black semigloss paint per federal standard 595.
Silver or Tri-alloy plated connector
Nominal Size (with N-type connector):
10.87" H x 2.6" W x 6.8" D,
(276.1 mm x 66.1 mm x 172.8 mm)
Weight 6.0 lbs. (2.73 kg)
*WT SERIES also available
100-T SERIES (100 WATT)
Connectors BNC, N, TNC, IEC 7/16
Frequency Range DC to 1 GHz at 1.10:1 max,
and VSWR 1 GHz to 2.4 GHz at 1.25:1 max.
Ambient Temp. –40°C to +40°C
Operating Position Vertical
Coolant Dry (Convection cooled)
Finish Black anodized fins.
Silver or Tri-alloy plated connector
Nominal Size (with N-type connector):
6.4" L x 2.6" W x 7.0" D,
(162.6 mm x 66.1 mm x 172.8 mm)
Weight 3.6 lbs. (1.64 kg)
100-CT-FA, 100-CT-MA (100 WATT)
Power Rating** 100 W max. @ 100°C flange
temperature derated to O W at 150°C
Connectors SMA
Frequency Range DC to 2 GHz at 1.15:1 max,
and VSWR 2 GHz to 3 GHz at 1.25:1 max.
Operating Position Any
Coolant Dry (Conduction cooled)
Finish Silver or Tri-alloy plated
Nominal Size 1.34" L x 1.375" W x 0.56" H,
(includes connector) (34.1 mm x 35 mm x 14.3 mm)
Base to 0.26" (6.6 mm)
Connector Center
Mounting Centers 0.625" x 1.125"
(15.9 mm x 28.6 mm)
Weight 1.0 oz. (28.4 g)
150-ST SERIES (150 WATT)
Connectors BNC, N, TNC, IEC 7/16
Frequency Range DC to 1 GHz at 1.10:1 max,
and VSWR 1 GHz to 2.4 GHz at 1.25:1 max.
Ambient Temp. –40°C to +40°C
Operating Position Vertical
Coolant Dry (Convection cooled)
Finish Black anodized fins.
Silver or Tri-alloy plated connector
Nominal Size (with N-type connector):
7.54" H x 4.0" W x 4.0" H,
(189 mm x 100 mm x 100 mm)
Weight 5.0 lbs. (2.30 kg)
** When mounted to a suitable heatsink capable of maintaining a 100°C or lower flange temperature.
www.bird-electronic.com 1-866-695-4569 Bird® Electronic Corporation
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
22
Termaline® RF Coaxial Terminations
Termaline® RF Coaxial Terminations
Use this Model Number Definition to specify part numbers when ordering T, ST, WT, and CT Series dry loads.
* Termination Model Number Definition:
Power Rating (Watts)
+ Call for custom connector
options not shown in this catalog
100 – T – FN
Product Type
T, WT – Convection-cooled
CT – Conduction-cooled
ST – Square Convection Cooled
Connector Gender
F – Female
M – Male
Connectors+
A – SMA
B – BNC
E – IEC 7/16
N–N
T – TNC
75-T SERIES (75 WATT)
2-T SERIES (2 Watt) and 5-T SERIES (5 Watt)
Connectors BNC, N, TNC
Frequency Range DC to 1 GHz at 1.10:1 max,
and VSWR 1 GHz to 6 GHz at 1.25:1 max.
(N type), 1 GHz to 4 GHz at 1.25:1 max.
(BNC and TNC)
Ambient Temp. –40°C to +40°C
Operating Position Any
Coolant Dry (Convection cooled)
Finish Silver or Tri-alloy plated
Nominal Size (with Male N-type connector): 1.6" L x 0.8" Dia.,
(40.7 mm x 20.4 mm)
Weight 1.9 oz. (55 g)
Also available, 0.5 Watt, SMA Male
0.5-T-MA-A (DC to 12 GHz, 1.25:1 max)
0.5-T-MA-B (DC to 18 GHz, 1.25:1 max)
25-T SERIES (25 Watt)
Connectors BNC, N, TNC, IEC 7/16"
Frequency Range DC to 1 GHz at 1.10:1 max,
and VSWR 1 GHz to 4 GHz at 1.25:1 max.
Ambient Temp. –40°C to +40°C
Operating Position Any
Coolant Dry (Convection cooled)
Finish Black anodized. Silver or Tri-alloy plated connector
Nominal Size (with N-type connector): 4.7" L x 2.3" Dia.,
(119.4 mm x 58.5 mm)
Weight 10.7 oz. (305 g)
50-T Series (50 Watt)
Connectors BNC, N, TNC, IEC 7/16"
Frequency Range DC to 1 GHz at 1.10:1 max,
and VSWR 1 GHz to 4 GHz at 1.25:1 max.
Ambient Temp. –40°C to +40°C
Operating Position Any
Coolant Dry (Convection cooled)
Finish Black anodized. Silver or Tri-alloy plated connector
Nominal Size (with N-type connector): 4.7" L x 2.3" Dia.,
(119.4 mm x 58.5 mm)
Weight 1.13 lbs. (0.52 kg)
** When mounted to a suitable heatsink capable of maintaining a 100°C or lower flange temperature.
21
Bird® Electronic Corporation 1-866-695-4569 www.bird-electronic.com
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
10-T SERIES (10 Watt) & 10-T-MN *
Connectors BNC, N, TNC
Frequency Range DC to 1 GHz at 1.10:1 max,
and VSWR 10-T :1 GHz to 4 GHz at 1.25:1 max.
10-T-MN: DC-2.4 GHz ≤ 1.10:
2.4-6 GHz ≤ 1.15:
6-10GHz ≤ 1.25
Ambient Temp. –40°C to +40°C
Operating Position Any
Coolant Dry (Convection cooled)
Finish Black anodized. Silver or Tri-alloy plated connector
Nominal Size (with N-type connector): 2" L x 2.3" Dia.,
(50.8 mm x 58.5 mm)
Weight 5.1 oz. (146 g)
Connectors
Frequency Range
and VSWR
Ambient Temp.
Operating Position
Coolant
Finish
Nominal Size
Weight
BNC, N, TNC, IEC 7/16
DC to 1 GHz at 1.10:1 max, 1 GHz to 4
GHz at 1.25:1 max.
–40°C to +40°C
Any
Dry (Convection cooled)
Black anodized. Silver or Tri-alloy plated connector
(with N-type connector): 6.7" L x 2.3" Dia.,
(170.2 mm x 58.5 mm)
1.32 lbs. (0.6 kg)
*Also available in 20-T-MN not listed
25-CT-FA, 25 CT-MA (25 Watt)
Power Rating** 25 W max. @ 100°C flange temperature,
derated to 0 W @ 150°C
Connectors SMA
Frequency Range DC to 1 GHz at 1.15:1 max,
and VSWR 1 GHz to 3 GHz at 1.25:1 max.
Operating Position Any
Coolant Dry (Conduction cooled)
Finish Silver or Tri-alloy plated
Nominal Size 0.9" L x 1.0" W x 0.5" H,
(includes connector) (22.9 mm x 25.4 mm x 12.7 mm)
Base to 0.25" (6.4 mm)
Connector Center
Mounting Centers 0.614" (15.6 mm)
Weight 0.4 oz. (11.4 g)
50-CT-FA, 50-CT-MA (50 WATT)
Power Rating** 50 W max. @ 100°C flange temperature,
derated to 0 W @ 150°C
Connectors SMA
Frequency Range DC to 3 GHz at 1.15:1 max,
and VSWR 3 GHz to 6 GHz at 1.25:1 max.
Operating Position Any
Coolant Dry (Conduction cooled)
Finish Silver or Tri-alloy plated
Nominal Size 0.86" L x 0.75" W x 0.39" H,
(includes connector) (21.9 mm x 19.2 mm x 10.0 mm)
Base to 0.162" (4.12 mm)
Connector Center
Mounting Centers 0.52" (13.3 mm)
Weight 1.1 oz. (31.2 g)
100-ST SERIES (100 WATT)
Connectors BNC, N, TNC, IEC 7/16
Frequency Range DC to 1 GHz at 1.10:1 max,
1 GHz to 4 GHz at 1.25:1 max.
Ambient Temp. –40°C to +40°C
Operating Position Any
Coolant Dry (Convection cooled)
Finish Black anodized fins.
Silver or Tri-alloy plated connector
Nominal Size (with N-type connector):
6.95" H x 2.75" W x 2.75" D,
(174 mm x 69.9 mm x 69.9 mm)
Weight 2.62 lbs. (1.20 kg)
150-T SERIES (150 WATT)*
Connectors BNC, N, TNC, IEC 7/16
Frequency Range DC to 1 GHz at 1.10:1 max,
and VSWR 1 GHz to 2.4 GHz at 1.25:1 max.
Ambient Temp. –40°C to +40°C
Operating Position Vertical
Coolant Dry (Convection cooled)
Finish Black semigloss paint per federal standard 595.
Silver or Tri-alloy plated connector
Nominal Size (with N-type connector):
10.87" H x 2.6" W x 6.8" D,
(276.1 mm x 66.1 mm x 172.8 mm)
Weight 6.0 lbs. (2.73 kg)
*WT SERIES also available
100-T SERIES (100 WATT)
Connectors BNC, N, TNC, IEC 7/16
Frequency Range DC to 1 GHz at 1.10:1 max,
and VSWR 1 GHz to 2.4 GHz at 1.25:1 max.
Ambient Temp. –40°C to +40°C
Operating Position Vertical
Coolant Dry (Convection cooled)
Finish Black anodized fins.
Silver or Tri-alloy plated connector
Nominal Size (with N-type connector):
6.4" L x 2.6" W x 7.0" D,
(162.6 mm x 66.1 mm x 172.8 mm)
Weight 3.6 lbs. (1.64 kg)
100-CT-FA, 100-CT-MA (100 WATT)
Power Rating** 100 W max. @ 100°C flange
temperature derated to O W at 150°C
Connectors SMA
Frequency Range DC to 2 GHz at 1.15:1 max,
and VSWR 2 GHz to 3 GHz at 1.25:1 max.
Operating Position Any
Coolant Dry (Conduction cooled)
Finish Silver or Tri-alloy plated
Nominal Size 1.34" L x 1.375" W x 0.56" H,
(includes connector) (34.1 mm x 35 mm x 14.3 mm)
Base to 0.26" (6.6 mm)
Connector Center
Mounting Centers 0.625" x 1.125"
(15.9 mm x 28.6 mm)
Weight 1.0 oz. (28.4 g)
150-ST SERIES (150 WATT)
Connectors BNC, N, TNC, IEC 7/16
Frequency Range DC to 1 GHz at 1.10:1 max,
and VSWR 1 GHz to 2.4 GHz at 1.25:1 max.
Ambient Temp. –40°C to +40°C
Operating Position Vertical
Coolant Dry (Convection cooled)
Finish Black anodized fins.
Silver or Tri-alloy plated connector
Nominal Size (with N-type connector):
7.54" H x 4.0" W x 4.0" H,
(189 mm x 100 mm x 100 mm)
Weight 5.0 lbs. (2.30 kg)
** When mounted to a suitable heatsink capable of maintaining a 100°C or lower flange temperature.
www.bird-electronic.com 1-866-695-4569 Bird® Electronic Corporation
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
22
Termaline® RF Coaxial Terminations
150-CT SERIES (150 WATT)
Power Rating** 150 W max. @ 100°C flange temperature,
derated to 0 W @ 150°C
Connectors BNC, N, TNC, SMA
Frequency Range DC to 1 GHz at 1.15:1 max,
and VSWR 1 GHz to 2.4 GHz at 1.25:1 max.
Operating Position Any
Coolant Dry (Conduction cooled)
Finish Silver or Tri-alloy plated
Nominal Size (with N connector):
1.86" L x 1.25" W x 1.062" H,
(47.3 mm x 31.8 mm x 27.0 mm)
Base to 0.531" (13.5 mm)
Connector Center
Mounting Centers 0.575" x 0.825" (14.6 mm x 21.0 mm)
Weight (with N connector): 2.2 oz. (62.5 g)
Termaline® RF Coaxial Terminations
MODEL 8135 (150 WATT)
Power Rating 150 W continuous
Frequency Range DC to 1 GHz at 1.1 max,
and VSWR 1 to 2.5 GHz at 1.2 max.
2.5 to 4 GHz at 1.3 max.
Ambient Temp. –40°C to +45°C
Connector QC type (Female N normally supplied)
Operating Position Horizontal only
Load Coolant 0.1 gal. (380 ml) refined mineral oil
Finish Gray powder coat
Nominal Size 9 1/2" L x 6 11/32" H x 3 15/16" W,
(includes connector) (241 mm x 161 mm x 100 mm)
Weight 6.0 lbs. (2.7 kg)
500-WT SERIES (500 WATT)
Connectors N, TNC, IEC 7/16
Frequency Range DC to 1 GHz at 1.10:1 max, 2.5 GHz at 1.25:1 max.
and VSWR
Operating Position Any, except mounting surface up
Coolant Dry (Convection cooled)
Finish Black anodized fins, tri-alloy plated connectors
Nominal Size (with female N-type connector;
excludes removable feet):
10.59" L x 5.4" W x 4.3" H,
(266.7 mm x 137.2 mm x 109.3 mm)
4 Mounting Holes, 1.812" x 7.687",
Center and Size typical 10-32 thread x 0.5" D
Weight 7.8 lbs. (3.6 kg)
MODEL 8141 (250 WATT)
MODEL 8201 (500 WATT)
Power Rating 500 W continuous
Frequency Range DC to 1 GHz at 1.1 max.,
and VSWR 1 GHz to 2.5 GHz at 1.25 max.
Ambient Temp. –40°C to +45°C
Connector QC type (Female N normally supplied)
Operating Position Horizontal only
Load Coolant 0.9 gal. (3.42 liters) refined mineral oil
Finish Gray powder coat
Nominal Size 16 13/16" L x 8 1/2" H x 5 15/16" W,
(includes connector) (427 mm x 216 mm x 151 mm)
Weight 21 lbs. (9.5 kg)
500-CT SERIES (500 WATT)
Power Rating** 500 W max. @ 100°C flange temperature,
derated to 0 W @ 150°C
Connectors BNC, N, TNC, SMA, IEC 7/16
Frequency Range DC to 1 GHz at 1.10:1 max.
and VSWR
Operating Position Any
Coolant Dry (Conduction cooled)
Finish Silver or Tri-alloy plated
Nominal Size N: 2.36" L x 2.00" W x 1.062" H,
(includes connector) (60.0 mm x 50.8 mm x 27.0 mm);
IEC 7/16: 2.80" L x 2.00" W x 1.20" H,
(71.2 mm x 50.8 mm x 30.5 mm)
Base to N: 0.515 (13.1 mm)
Connector Center IEC 7/16: 0.675" (17.2 mm)
Mounting Centers 0.875" x 1.625" (22.3 mm x 41.3 mm)
Weight N: 8.2 oz. (232.9 g), IEC 7/16: 6.0 oz. (170.3 g)
250 CT-SERIES (250 WATT)
Power Rating**
Connectors
Frequency Range
and VSWR
Operating Position
Coolant
Finish
Nominal Size
(includes connector)
Base to
Connector Center
Mounting Centers
Weight
250 W max. @ 100°C flange temperature,
derated to 0 W @ 150°C
BNC, N, TNC, SMA
SMA: DC to 2 GHz at 1.15:1 max,
2 GHz to 3 GHz at 1.25:1 max.;
All Others: DC to 1 GHz at 1.15:1 max,
1 GHz to 2.4 GHz at 1.25:1 max
Any
Dry (Conduction cooled)
Silver or Tri-alloy plated
2.36" L x 2.00" W x 1.062" H,
(60.0 mm x 50.8 mm x 27.0 mm)
SMA: 0.26" (6.6 mm), N: 0.515 (13.1 mm)
Nominal Size
Weight
BNC, N, TNC, IEC 7/16
DC to 1 GHz at 1.10:1 max,
1 GHz to 2.4 GHz at 1.25:1 max.
–40°C to +40°C
Vertical
Dry (Convection cooled)
Black semigloss paint per federal standard 595.
Silver or Tri-alloy plated connector
(with N-type connector):
10.9" H x 5.4" W x 16.8" D,
(276.9 mm x 137.2 mm x 172.8 mm)
11.5 lbs. (5.23 kg)
** When mounted to a suitable heatsink capable of maintaining a 100°C or lower flange temperature.
23
Ambient Temp.
Connector
Operating Position
Load Coolant
Finish
Nominal Size
(includes connector)
Weight
250 W continuous
DC to 1 GHz at 1.1 max.,
1 GHz to 1.8 GHz at 1.2 max.,
1.8 to 2.5 GHz at 1.3 max.
–40°C to +45°C
QC type (Female N normally supplied)
Horizontal only
0.35 gal. (1.3 liters) silicone oil
Gray powder coat
9 9/16" L x 8 1/2" H x 5 15/16" W,
(243 mm x 216 mm x 151 mm)
10 lbs. (4.5 kg)
0.875" x 1.625" (22.3 mm x 41.3 mm)
(with N connector) 5.2 oz. (147.6 g)
300-T SERIES (300 WATT) (WT SERIES also available)
Connectors
Frequency Range
and VSWR
Ambient Temp.
Operating Position
Coolant
Finish
Power Rating
Frequency Range
and VSWR
Bird® Electronic Corporation 1-866-695-4569 www.bird-electronic.com
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
MODEL 8072A-1 (300 WATT)
Power Rating 300 W continuous @ 100°C case temperature
Connectors N female
Frequency Range DC to 1 GHz at 1.10:1 max.,
and VSWR 1 to 2.5 GHz at 1.20:1 max.
Ambient Temp. –40°C to +45°C
Operating Position Any
Coolant Dry (Conduction cooled)
Finish Silver or Tri-alloy, Silver plated or Tri-alloy connectors
Nominal Size (with N-type connector):
4.4" L x 2" W x 1.3" H,
(110 mm x 51 mm x 26 mm)
Weight 12 oz. (340 g)
600-T-QFN (600 WATT)
Frequency Range
and VSWR
Ambient Temp.
Connector
Coolant
Finish
Nominal Size
Weight
Accessories
DC to 1 GHz at 1.10:1 max.
1 to 2.4 GHz at 1.25:1 max.
–40°C to +40°C
QC type (Female N supplied)
Dry (Convection cooled)
Black anodized fins, tri-alloy plated connector
12.25" L x 8.875" H x 9.65" W
21.5 lbs.
QC Connector (page 37)
1000-WT (1000 WATT)
MODEL 8401 (600 WATT)
Power Rating 600 W continuous
Frequency Range DC to 1 GHz at 1.1 max.,
and VSWR 1 GHz to 2.8 GHz at 1.2 max.,
2.8 GHz to 3 at 1.3 max.
Ambient Temp. –40°C to +45°C
Connector QC type (Female N normally supplied)
Operating Position Horizontal only
Load Coolant 0.7 gal. (2.65 liters) refined mineral oil
Finish Gray powder coat
Nominal Size (16 13/16" H x 8 1/2" W x 5 15/16" D,
includes connector) (427 mm x 216 mm x 151 mm)
Weight 20 lbs. (9.1 kg)
Connectors
Frequency Range
and VSWR
Operating Position
Coolant
Finish
Nominal Size
4 Mounting Holes,
Center and Size
Weight
N, TNC, IEC 7/16
DC to 1 GHz at 1.10:1 max,
2.4 GHz at 1.25:1 max.
Any, except mounting surface up
Dry (Convection cooled)
Black anodized fins,
tri-alloy plated connectors
(with female N-type connector;
excludes removable feet):
17.98" L x 8.95" W x 4.3" H
1.885" x 14.65",
typical 1/4 - 20 thread x 0.5" D
26.5 lbs. (12.1 kg)
** When mounted to a suitable heatsink capable of maintaining a 100°C or lower flange temperature.
www.bird-electronic.com 1-866-695-4569 Bird® Electronic Corporation
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
24
Termaline® RF Coaxial Terminations
150-CT SERIES (150 WATT)
Power Rating** 150 W max. @ 100°C flange temperature,
derated to 0 W @ 150°C
Connectors BNC, N, TNC, SMA
Frequency Range DC to 1 GHz at 1.15:1 max,
and VSWR 1 GHz to 2.4 GHz at 1.25:1 max.
Operating Position Any
Coolant Dry (Conduction cooled)
Finish Silver or Tri-alloy plated
Nominal Size (with N connector):
1.86" L x 1.25" W x 1.062" H,
(47.3 mm x 31.8 mm x 27.0 mm)
Base to 0.531" (13.5 mm)
Connector Center
Mounting Centers 0.575" x 0.825" (14.6 mm x 21.0 mm)
Weight (with N connector): 2.2 oz. (62.5 g)
Termaline® RF Coaxial Terminations
MODEL 8135 (150 WATT)
Power Rating 150 W continuous
Frequency Range DC to 1 GHz at 1.1 max,
and VSWR 1 to 2.5 GHz at 1.2 max.
2.5 to 4 GHz at 1.3 max.
Ambient Temp. –40°C to +45°C
Connector QC type (Female N normally supplied)
Operating Position Horizontal only
Load Coolant 0.1 gal. (380 ml) refined mineral oil
Finish Gray powder coat
Nominal Size 9 1/2" L x 6 11/32" H x 3 15/16" W,
(includes connector) (241 mm x 161 mm x 100 mm)
Weight 6.0 lbs. (2.7 kg)
500-WT SERIES (500 WATT)
Connectors N, TNC, IEC 7/16
Frequency Range DC to 1 GHz at 1.10:1 max, 2.5 GHz at 1.25:1 max.
and VSWR
Operating Position Any, except mounting surface up
Coolant Dry (Convection cooled)
Finish Black anodized fins, tri-alloy plated connectors
Nominal Size (with female N-type connector;
excludes removable feet):
10.59" L x 5.4" W x 4.3" H,
(266.7 mm x 137.2 mm x 109.3 mm)
4 Mounting Holes, 1.812" x 7.687",
Center and Size typical 10-32 thread x 0.5" D
Weight 7.8 lbs. (3.6 kg)
MODEL 8141 (250 WATT)
MODEL 8201 (500 WATT)
Power Rating 500 W continuous
Frequency Range DC to 1 GHz at 1.1 max.,
and VSWR 1 GHz to 2.5 GHz at 1.25 max.
Ambient Temp. –40°C to +45°C
Connector QC type (Female N normally supplied)
Operating Position Horizontal only
Load Coolant 0.9 gal. (3.42 liters) refined mineral oil
Finish Gray powder coat
Nominal Size 16 13/16" L x 8 1/2" H x 5 15/16" W,
(includes connector) (427 mm x 216 mm x 151 mm)
Weight 21 lbs. (9.5 kg)
500-CT SERIES (500 WATT)
Power Rating** 500 W max. @ 100°C flange temperature,
derated to 0 W @ 150°C
Connectors BNC, N, TNC, SMA, IEC 7/16
Frequency Range DC to 1 GHz at 1.10:1 max.
and VSWR
Operating Position Any
Coolant Dry (Conduction cooled)
Finish Silver or Tri-alloy plated
Nominal Size N: 2.36" L x 2.00" W x 1.062" H,
(includes connector) (60.0 mm x 50.8 mm x 27.0 mm);
IEC 7/16: 2.80" L x 2.00" W x 1.20" H,
(71.2 mm x 50.8 mm x 30.5 mm)
Base to N: 0.515 (13.1 mm)
Connector Center IEC 7/16: 0.675" (17.2 mm)
Mounting Centers 0.875" x 1.625" (22.3 mm x 41.3 mm)
Weight N: 8.2 oz. (232.9 g), IEC 7/16: 6.0 oz. (170.3 g)
250 CT-SERIES (250 WATT)
Power Rating**
Connectors
Frequency Range
and VSWR
Operating Position
Coolant
Finish
Nominal Size
(includes connector)
Base to
Connector Center
Mounting Centers
Weight
250 W max. @ 100°C flange temperature,
derated to 0 W @ 150°C
BNC, N, TNC, SMA
SMA: DC to 2 GHz at 1.15:1 max,
2 GHz to 3 GHz at 1.25:1 max.;
All Others: DC to 1 GHz at 1.15:1 max,
1 GHz to 2.4 GHz at 1.25:1 max
Any
Dry (Conduction cooled)
Silver or Tri-alloy plated
2.36" L x 2.00" W x 1.062" H,
(60.0 mm x 50.8 mm x 27.0 mm)
SMA: 0.26" (6.6 mm), N: 0.515 (13.1 mm)
Nominal Size
Weight
BNC, N, TNC, IEC 7/16
DC to 1 GHz at 1.10:1 max,
1 GHz to 2.4 GHz at 1.25:1 max.
–40°C to +40°C
Vertical
Dry (Convection cooled)
Black semigloss paint per federal standard 595.
Silver or Tri-alloy plated connector
(with N-type connector):
10.9" H x 5.4" W x 16.8" D,
(276.9 mm x 137.2 mm x 172.8 mm)
11.5 lbs. (5.23 kg)
** When mounted to a suitable heatsink capable of maintaining a 100°C or lower flange temperature.
23
Ambient Temp.
Connector
Operating Position
Load Coolant
Finish
Nominal Size
(includes connector)
Weight
250 W continuous
DC to 1 GHz at 1.1 max.,
1 GHz to 1.8 GHz at 1.2 max.,
1.8 to 2.5 GHz at 1.3 max.
–40°C to +45°C
QC type (Female N normally supplied)
Horizontal only
0.35 gal. (1.3 liters) silicone oil
Gray powder coat
9 9/16" L x 8 1/2" H x 5 15/16" W,
(243 mm x 216 mm x 151 mm)
10 lbs. (4.5 kg)
0.875" x 1.625" (22.3 mm x 41.3 mm)
(with N connector) 5.2 oz. (147.6 g)
300-T SERIES (300 WATT) (WT SERIES also available)
Connectors
Frequency Range
and VSWR
Ambient Temp.
Operating Position
Coolant
Finish
Power Rating
Frequency Range
and VSWR
Bird® Electronic Corporation 1-866-695-4569 www.bird-electronic.com
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
MODEL 8072A-1 (300 WATT)
Power Rating 300 W continuous @ 100°C case temperature
Connectors N female
Frequency Range DC to 1 GHz at 1.10:1 max.,
and VSWR 1 to 2.5 GHz at 1.20:1 max.
Ambient Temp. –40°C to +45°C
Operating Position Any
Coolant Dry (Conduction cooled)
Finish Silver or Tri-alloy, Silver plated or Tri-alloy connectors
Nominal Size (with N-type connector):
4.4" L x 2" W x 1.3" H,
(110 mm x 51 mm x 26 mm)
Weight 12 oz. (340 g)
600-T-QFN (600 WATT)
Frequency Range
and VSWR
Ambient Temp.
Connector
Coolant
Finish
Nominal Size
Weight
Accessories
DC to 1 GHz at 1.10:1 max.
1 to 2.4 GHz at 1.25:1 max.
–40°C to +40°C
QC type (Female N supplied)
Dry (Convection cooled)
Black anodized fins, tri-alloy plated connector
12.25" L x 8.875" H x 9.65" W
21.5 lbs.
QC Connector (page 37)
1000-WT (1000 WATT)
MODEL 8401 (600 WATT)
Power Rating 600 W continuous
Frequency Range DC to 1 GHz at 1.1 max.,
and VSWR 1 GHz to 2.8 GHz at 1.2 max.,
2.8 GHz to 3 at 1.3 max.
Ambient Temp. –40°C to +45°C
Connector QC type (Female N normally supplied)
Operating Position Horizontal only
Load Coolant 0.7 gal. (2.65 liters) refined mineral oil
Finish Gray powder coat
Nominal Size (16 13/16" H x 8 1/2" W x 5 15/16" D,
includes connector) (427 mm x 216 mm x 151 mm)
Weight 20 lbs. (9.1 kg)
Connectors
Frequency Range
and VSWR
Operating Position
Coolant
Finish
Nominal Size
4 Mounting Holes,
Center and Size
Weight
N, TNC, IEC 7/16
DC to 1 GHz at 1.10:1 max,
2.4 GHz at 1.25:1 max.
Any, except mounting surface up
Dry (Convection cooled)
Black anodized fins,
tri-alloy plated connectors
(with female N-type connector;
excludes removable feet):
17.98" L x 8.95" W x 4.3" H
1.885" x 14.65",
typical 1/4 - 20 thread x 0.5" D
26.5 lbs. (12.1 kg)
** When mounted to a suitable heatsink capable of maintaining a 100°C or lower flange temperature.
www.bird-electronic.com 1-866-695-4569 Bird® Electronic Corporation
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
24
Termaline® RF Coaxial Terminations
Termaline® RF Coaxial Terminations
MODEL 8251, 8251T* & 8251D (1 kW)
Power Rating
Frequency Range
and VSWR
Ambient
Temperature Range
Connector
Operating Position
Load Coolant
Finish
Nominal Size
(includes connector)
Weight
1000 W continuous
DC to 1 GHz at 1.1 max.,
1 GHz to 2 GHz at 1.25 max.,
2 GHz to 2.4 at 1.3 max.
(1.065 max., 470-860 MHz for “D” Model)
–40°C to +45°C
QC type (Female LC normally supplied,
and Female N normally supplied unmounted)
Horizontal only
1.1 gal. (4.1 liters) silicon oil
Gray powder coat
17 29/32" L x 8 1/2" H x 5 15/16" W,
(455 mm x 216 mm x 151 mm)
25 lbs., 8 oz. (11.5 kg)
MODEL 8833-300 (1kW)
Power Rating 1000 W continuous
Frequency Range DC to 1 GHz at 1.1 max.,
and VSWR 1 GHz to 2.5 GHz at 1.25 max.
Ambient –40°C to +45°C
Temperature Range
Connector QC type (Female LC normally supplied,
and Female N normally supplied unmounted)
Operating Position Horizontal only
Load Coolant 2.9 gal. (11 liters) refined mineral oil
Finish Gray powder coat
Nominal Size 23 1/8" L x 17 3/16" H x 7 1/8" W,
(includes connector) (587 mm x 437 mm x 181 mm)
Weight 54 lbs., 10 oz. (24.8 kg)
8890-300 SERIES (2.5 kW)
Models
8890-300
Power Rating
Frequency Range
and VSWR
Impedance
50 ohms nominal
Ambient
Temperature Range
Connector
QC-LC(F)
Recess (In.)
—
Operating Position
Load Coolant
Finish
Nominal Size
23 1/8" L x 7" W
x 17 3/16" H,
(587 mm x 178 mm
x 437 mm)
Weight
57 lbs. (26 kg)
8892-300 & 8892-300D
8895-300
8891-300
2500 W continuous
8897-300
8898-300
DC to 1 GHz at 1.1 max., 1 GHz to 2 GHz at 1.25 max., 2 GHz to 2.4 GHz at 1.3 max.
50 ohms nominal
50 ohms nominal
50 ohms nominal
50 ohms nominal
50 ohms nominal
3 1/8" Unflg.
0.0
3 1/8" Unflg.
0.688
–40°C to +45°C
1 5/8" EIA flg.
0.625
23 1/8" L x 7" W
x 17 3/16" H,
(587 mm x 178 mm
x 437 mm)
58 lbs. (26 kg)
1 5/8" Unflg.
3 1/8" EIA flg.
0.438
0.922
Horizontal only
2.9 gal. (11 liters) silicone oil
Gray powder coat
22 3/16" L x 7" W
25 1/8" L x 7" W
x 17 3/16" H,
x 17 3/16" H,
(564 mm x 178 mm
(638 mm x 178 mm
x 437 mm)
x 437 mm)
58 lbs. (26 kg)
59 lbs. (27 kg)
24 5/32" L x 7" W
x 17 3/16" H,
(626 mm x 178 mm
x 437 mm)
59 lbs. (27 kg)
24 5/32" L x 7" W
x 17 3/16" H,
(626 mm x 178 mm
x 437 mm)
59 lbs. (27 kg)
*Over temperature interlock safety switch option available
8890-300 SERIES with BA 300-115, -230 (5 kW)
8860 SERIES (1.5 kW)
Models
8860
8861
8862 & 8862 D
8863
Power Rating
1500 W continuous
Frequency Range
DC to 1 GHz at 1.1 max., (1.065 max., 470-860 MHz for “D” Model)
and VSWR
1 GHz to 2 GHz at 1.25 max.
Ambient
–40°C to +45°C
Temperature Range
Connector
QC-LC(F)
1 5/8" Unflg.
1 5/8" EIA flg.
3 1/8" Unflg.
Operating Position
Horizontal only
Load Coolant
1.5 gal. (5.68 liters) silicone oil
Finish
Gray powder coat
Nominal Size 17 1/8" L x 7 1/2" W x 13 1/8" H, 17 7/8" L x 7 1/2" W x 13 1/8" H, 17 1/8" L x 7 1/2" W x 13 1/8" H,
18 5/8" L x 7 1/2" W x 13 1/8" H,
(445 mm x 184 mm x 333 mm) (454 mm x 184 mm x 333 mm)
(445 mm x 184 mm x 333 mm)
(473 mm x 184 mm x 333 mm)
Weight
30 lbs. (13.6 kg)
31 lbs. (14.1 kg)
31 lbs. (14.1 kg)
32 lbs. (14.5 kg)
8230 (2.5 kW Water Cooled)
Power Rating With cooling water: 2500 W, Without cooling water:
200 W in vertical position,
500 W in horizontal position
Frequency Range DC to 1 GHz at 1.1 max.,
and VSWR 1 GHz to 2.5 GHz at 1.25 max.
Ambient –40°C to +45°C
Temperature Range
Water +8°C to +80°C
Temperature Range
Water Flow Rate 1/2 gal./minute (2 liters/minute) min.
Connector QC type (Female LC normally supplied)
Operating Position Vertical, connector down (when water cooled)
Load Coolant 0.9 gal. (3.4 liters) refined mineral oil
Finish Gray powder coat
Nominal Size 17 22/32" L x 8 1/2" H x 5 15/16" W,
(includes connector) (450 mm x 216 mm x 151 mm)
Weight 27 lbs. (12 kg)
8864
Models with BA-300-***
Power Rating
Frequency Range
and VSWR
Impedance
Ambient
Temperature Range
Connector
Recess (In.)
Operating Position
Load Coolant
Finish
Nominal Size
Weight
3 1/8" EIA flg.
8890-300
8892-3000
8895-300
8891-300
8896-300
8897-300
5000 W continuous with blower on, 1250 W with blower off
8898-300
DC to 1 GHz at 1.1 max., 1 GHz to 2 GHz at 1.25 max., 2 GHz to 2.4 GHz at 1.3 max.
50 ohms nominal 50 ohms nominal
50 ohms nominal
50 ohms nominal
51.5 ohms nominal
50 ohms nominal
50 ohms nominal
3 1/8" Unflg.
0.0
3 1/8" Unflg.
0.688
–40°C to +45°C
QC-LC(F)
—
23 1/8" L x 7 3/8" W
x 22 11/16" H,
(587 mm x 187 mm
x 560 mm)
70 lbs. (32 kg)
1 5/8" EIA flg.
0.625
1 5/8" Unflg.
0.438
3 1/8" EIA flg.
3 1/8" Unflg.
0.922
0.0
Horizontal only
2.9 gal. (11 liters) silicone oil
Gray powder coat
23 1/8" L x 7 3/8" W 22 3/16" L x 7 3/8" W 25 1/8" L x 7 3/8" W
24 5/32" L x 7 3/8" W
x 22 11/16" H,
x 22 11/16" H,
x 22 11/16" H,
x 22 11/16" H,
(587 mm x 187 mm
(564 mm x 187 mm
(638 mm x 187 mm
(614 mm x 187 mm
x 560 mm)
x 560 mm)
x 560 mm)
x 560 mm)
72 lbs. (33 kg)
72 lbs. (33 kg)
73 lbs. (33 kg)
73 lbs. (33 kg)
Specify -115 for 115 Vac Blower or -230 for 230 Vac Blower
24 5/32" L x 7 3/8" W 24 5/32" L x 7 3/8" W
x 22 11/16" H,
x 22 11/16" H,
(614 mm x 187 mm
(614 mm x 187 mm
x 560 mm)
x 560 mm)
73 lbs. (33 kg)
73 lbs. (33 kg)
NOTE: Overload thermoswitch P/N 8890-008 is optional. Free assembly when ordered as a package.
* Available in special 8892-300 D model for Digital Broadcast. VSWR = 1.065 max., 470 – 860 MHz.
19 1/2" L x 7 1/2" W x 13 1/8" H,
(495 mm x 184 mm x 333 mm)
32 lbs. (14.5 kg)
8921 SERIES (5 kW OIL DIELECTRIC)
Models
8921
Power Rating
Frequency Range
and VSWR
Ambient
Temperature Range
Connector
QC-LC(F)
Operating Position
Load Coolant
Finish
Nominal Size 30 27/32" L x 9 1/2" W x 25 13/16" H,
(783 mm x 241 mm x 656 mm)
Weight
119 lbs. (54 kg)
8922 & 8922D
8926 & 8926D
8927
5000 W continuous
DC to 1 GHz at 1.1 max., (1.065 max., 470-860 MHz for “D” Model)
–40°C to +45°C
1 5/8" EIA flg.
3 1/8" EIA flg.
Horizontal only
6 2/3 gal. (25.3 liters) silicone oil
Gray powder coat
30 27/32" L x 9 1/2" W x 25 13/16" H,
32 3/4" L x 9 1/2" W x 25 13/16" H,
(783 mm x 241 mm x 656 mm)
(832 mm x 241 mm x 656 mm)
121 lbs. (55 kg)
126.5 lbs. (57 kg)
3 1/8" Unflg.
31 7/8" L x 9 1/2" W x 25 13/16" H,
(809 mm x 241 mm x 656 mm)
126 lbs. (57 kg)
NOTE: An 8890-008 over-temperature interlock safety switch is included.
* Available in special 8922 D model for Digital Broadcast. VSWR = 1.065 max., 470-860 MHz
25
Bird® Electronic Corporation 1-866-695-4569 www.bird-electronic.com
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
www.bird-electronic.com 1-866-695-4569 Bird® Electronic Corporation
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
26
Termaline® RF Coaxial Terminations
Termaline® RF Coaxial Terminations
MODEL 8251, 8251T* & 8251D (1 kW)
Power Rating
Frequency Range
and VSWR
Ambient
Temperature Range
Connector
Operating Position
Load Coolant
Finish
Nominal Size
(includes connector)
Weight
1000 W continuous
DC to 1 GHz at 1.1 max.,
1 GHz to 2 GHz at 1.25 max.,
2 GHz to 2.4 at 1.3 max.
(1.065 max., 470-860 MHz for “D” Model)
–40°C to +45°C
QC type (Female LC normally supplied,
and Female N normally supplied unmounted)
Horizontal only
1.1 gal. (4.1 liters) silicon oil
Gray powder coat
17 29/32" L x 8 1/2" H x 5 15/16" W,
(455 mm x 216 mm x 151 mm)
25 lbs., 8 oz. (11.5 kg)
MODEL 8833-300 (1kW)
Power Rating 1000 W continuous
Frequency Range DC to 1 GHz at 1.1 max.,
and VSWR 1 GHz to 2.5 GHz at 1.25 max.
Ambient –40°C to +45°C
Temperature Range
Connector QC type (Female LC normally supplied,
and Female N normally supplied unmounted)
Operating Position Horizontal only
Load Coolant 2.9 gal. (11 liters) refined mineral oil
Finish Gray powder coat
Nominal Size 23 1/8" L x 17 3/16" H x 7 1/8" W,
(includes connector) (587 mm x 437 mm x 181 mm)
Weight 54 lbs., 10 oz. (24.8 kg)
8890-300 SERIES (2.5 kW)
Models
8890-300
Power Rating
Frequency Range
and VSWR
Impedance
50 ohms nominal
Ambient
Temperature Range
Connector
QC-LC(F)
Recess (In.)
—
Operating Position
Load Coolant
Finish
Nominal Size
23 1/8" L x 7" W
x 17 3/16" H,
(587 mm x 178 mm
x 437 mm)
Weight
57 lbs. (26 kg)
8892-300 & 8892-300D
8895-300
8891-300
2500 W continuous
8897-300
8898-300
DC to 1 GHz at 1.1 max., 1 GHz to 2 GHz at 1.25 max., 2 GHz to 2.4 GHz at 1.3 max.
50 ohms nominal
50 ohms nominal
50 ohms nominal
50 ohms nominal
50 ohms nominal
3 1/8" Unflg.
0.0
3 1/8" Unflg.
0.688
–40°C to +45°C
1 5/8" EIA flg.
0.625
23 1/8" L x 7" W
x 17 3/16" H,
(587 mm x 178 mm
x 437 mm)
58 lbs. (26 kg)
1 5/8" Unflg.
3 1/8" EIA flg.
0.438
0.922
Horizontal only
2.9 gal. (11 liters) silicone oil
Gray powder coat
22 3/16" L x 7" W
25 1/8" L x 7" W
x 17 3/16" H,
x 17 3/16" H,
(564 mm x 178 mm
(638 mm x 178 mm
x 437 mm)
x 437 mm)
58 lbs. (26 kg)
59 lbs. (27 kg)
24 5/32" L x 7" W
x 17 3/16" H,
(626 mm x 178 mm
x 437 mm)
59 lbs. (27 kg)
24 5/32" L x 7" W
x 17 3/16" H,
(626 mm x 178 mm
x 437 mm)
59 lbs. (27 kg)
*Over temperature interlock safety switch option available
8890-300 SERIES with BA 300-115, -230 (5 kW)
8860 SERIES (1.5 kW)
Models
8860
8861
8862 & 8862 D
8863
Power Rating
1500 W continuous
Frequency Range
DC to 1 GHz at 1.1 max., (1.065 max., 470-860 MHz for “D” Model)
and VSWR
1 GHz to 2 GHz at 1.25 max.
Ambient
–40°C to +45°C
Temperature Range
Connector
QC-LC(F)
1 5/8" Unflg.
1 5/8" EIA flg.
3 1/8" Unflg.
Operating Position
Horizontal only
Load Coolant
1.5 gal. (5.68 liters) silicone oil
Finish
Gray powder coat
Nominal Size 17 1/8" L x 7 1/2" W x 13 1/8" H, 17 7/8" L x 7 1/2" W x 13 1/8" H, 17 1/8" L x 7 1/2" W x 13 1/8" H,
18 5/8" L x 7 1/2" W x 13 1/8" H,
(445 mm x 184 mm x 333 mm) (454 mm x 184 mm x 333 mm)
(445 mm x 184 mm x 333 mm)
(473 mm x 184 mm x 333 mm)
Weight
30 lbs. (13.6 kg)
31 lbs. (14.1 kg)
31 lbs. (14.1 kg)
32 lbs. (14.5 kg)
8230 (2.5 kW Water Cooled)
Power Rating With cooling water: 2500 W, Without cooling water:
200 W in vertical position,
500 W in horizontal position
Frequency Range DC to 1 GHz at 1.1 max.,
and VSWR 1 GHz to 2.5 GHz at 1.25 max.
Ambient –40°C to +45°C
Temperature Range
Water +8°C to +80°C
Temperature Range
Water Flow Rate 1/2 gal./minute (2 liters/minute) min.
Connector QC type (Female LC normally supplied)
Operating Position Vertical, connector down (when water cooled)
Load Coolant 0.9 gal. (3.4 liters) refined mineral oil
Finish Gray powder coat
Nominal Size 17 22/32" L x 8 1/2" H x 5 15/16" W,
(includes connector) (450 mm x 216 mm x 151 mm)
Weight 27 lbs. (12 kg)
8864
Models with BA-300-***
Power Rating
Frequency Range
and VSWR
Impedance
Ambient
Temperature Range
Connector
Recess (In.)
Operating Position
Load Coolant
Finish
Nominal Size
Weight
3 1/8" EIA flg.
8890-300
8892-3000
8895-300
8891-300
8896-300
8897-300
5000 W continuous with blower on, 1250 W with blower off
8898-300
DC to 1 GHz at 1.1 max., 1 GHz to 2 GHz at 1.25 max., 2 GHz to 2.4 GHz at 1.3 max.
50 ohms nominal 50 ohms nominal
50 ohms nominal
50 ohms nominal
51.5 ohms nominal
50 ohms nominal
50 ohms nominal
3 1/8" Unflg.
0.0
3 1/8" Unflg.
0.688
–40°C to +45°C
QC-LC(F)
—
23 1/8" L x 7 3/8" W
x 22 11/16" H,
(587 mm x 187 mm
x 560 mm)
70 lbs. (32 kg)
1 5/8" EIA flg.
0.625
1 5/8" Unflg.
0.438
3 1/8" EIA flg.
3 1/8" Unflg.
0.922
0.0
Horizontal only
2.9 gal. (11 liters) silicone oil
Gray powder coat
23 1/8" L x 7 3/8" W 22 3/16" L x 7 3/8" W 25 1/8" L x 7 3/8" W
24 5/32" L x 7 3/8" W
x 22 11/16" H,
x 22 11/16" H,
x 22 11/16" H,
x 22 11/16" H,
(587 mm x 187 mm
(564 mm x 187 mm
(638 mm x 187 mm
(614 mm x 187 mm
x 560 mm)
x 560 mm)
x 560 mm)
x 560 mm)
72 lbs. (33 kg)
72 lbs. (33 kg)
73 lbs. (33 kg)
73 lbs. (33 kg)
Specify -115 for 115 Vac Blower or -230 for 230 Vac Blower
24 5/32" L x 7 3/8" W 24 5/32" L x 7 3/8" W
x 22 11/16" H,
x 22 11/16" H,
(614 mm x 187 mm
(614 mm x 187 mm
x 560 mm)
x 560 mm)
73 lbs. (33 kg)
73 lbs. (33 kg)
NOTE: Overload thermoswitch P/N 8890-008 is optional. Free assembly when ordered as a package.
* Available in special 8892-300 D model for Digital Broadcast. VSWR = 1.065 max., 470 – 860 MHz.
19 1/2" L x 7 1/2" W x 13 1/8" H,
(495 mm x 184 mm x 333 mm)
32 lbs. (14.5 kg)
8921 SERIES (5 kW OIL DIELECTRIC)
Models
8921
Power Rating
Frequency Range
and VSWR
Ambient
Temperature Range
Connector
QC-LC(F)
Operating Position
Load Coolant
Finish
Nominal Size 30 27/32" L x 9 1/2" W x 25 13/16" H,
(783 mm x 241 mm x 656 mm)
Weight
119 lbs. (54 kg)
8922 & 8922D
8926 & 8926D
8927
5000 W continuous
DC to 1 GHz at 1.1 max., (1.065 max., 470-860 MHz for “D” Model)
–40°C to +45°C
1 5/8" EIA flg.
3 1/8" EIA flg.
Horizontal only
6 2/3 gal. (25.3 liters) silicone oil
Gray powder coat
30 27/32" L x 9 1/2" W x 25 13/16" H,
32 3/4" L x 9 1/2" W x 25 13/16" H,
(783 mm x 241 mm x 656 mm)
(832 mm x 241 mm x 656 mm)
121 lbs. (55 kg)
126.5 lbs. (57 kg)
3 1/8" Unflg.
31 7/8" L x 9 1/2" W x 25 13/16" H,
(809 mm x 241 mm x 656 mm)
126 lbs. (57 kg)
NOTE: An 8890-008 over-temperature interlock safety switch is included.
* Available in special 8922 D model for Digital Broadcast. VSWR = 1.065 max., 470-860 MHz
25
Bird® Electronic Corporation 1-866-695-4569 www.bird-electronic.com
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
www.bird-electronic.com 1-866-695-4569 Bird® Electronic Corporation
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
26
Termaline® RF Coaxial Terminations
Termaline® RF Coaxial Terminations
8931-115, -230 SERIES (10 kW OIL DIELECTRIC)
Models
8931-**
8932-**
8936-**
Power Rating
10 kW continuous with blower on, 2.5 kW with blower off
Frequency Range
DC to 400 MHz at 1.15 max., 400 MHz to 1 GHz at 1.20 max.
and VSWR
Ambient
–40°C to +45°C
Temperature Range
Connector
QC-LC(F)
1 5/8" EIA flg.
3 1/8" EIA flg.
Operating Position
Horizontal only
Load Coolant
6 2/3 gal. (25.3 liters) silicone oil
Finish
Gray powder coat
Nominal Size 30 7/32" L x 9 1/2" W x 33 5/16" H, 30 7/32" L x 9 1/2" W x 33 5/16" H, 32 1/8" L x 9 1/2" W x 33 5/16" H,
(768 mm x 241 mm x 847 mm)
(768 mm x 241 mm x 847 mm)
(816 mm x 241 mm x 847 mm)
Weight
135 lbs. (61 kg)
137 lbs. (62 kg)
142 lbs. (64.8 kg)
8937-**
3 1/8" Unflg.
31 1/4" L x 9 1/2" W x 33 5/16" H,
(793 mm x 241 mm x 847 mm)
142 lbs. (64.5 kg)
NOTE: Both an 8892-333 blower control switch and an 8890-017 over-temperature interlock safety switch are included.
** AC power 115 or 230 Vac, 50/60 Hz (add suffix –115 or –230 to Model number)
8710 SERIES (1kW DIRECT WATER COOLED)
Models
8710F
8710M
8711F
8711M
Power Rating
1000 W continuous
Frequency Range
DC to 1 GHz at 1.1 max., 1 GHz to 3 GHz at 1.3 max., 3 GHz to 3.5 at 1.35 max.
and VSWR
Water
+8°C to +80°C
Temperature Range
Water Flow Rate
1 quart/minute @ 8°C to 3 gpm @ 80°C (.95 liters/minute @ 8°C to 2.84 lpm @ 80°C)
Waterlines
1/8" FPT
Connectors
N Female
N Male
C Female
C Male
Operating Position
Any
Load Coolant
Potable water
Finish
Silver plated
Nominal Size
(excl. 18" waterlines) 3 21/32" L x 11/16" Dia., (93 mm x 17 mm)
Weight
5 oz. (142 g)
5 oz. (142 g)
5 oz. (142 g)
5 oz. (142 g)
8713
8745, 8746 (20 kW Econoload®)
8755, 8756 (30kW Econoload®)
Models
8745
8746
Power Rating
20 kW continuous
Frequency Range
1.1 max. 1 kHz to 900 MHz (DC for continuity checks)
and VSWR
Water
+5°C to +60°C
Temperature Range
Water Flow Rate
6 gal./minute @ 5°C to 8 gpm @ 60°C
(22.8 liters/minute @ 5°C to 30.4 lpm @ 60°C)
Waterlines
1/2" FPT or 3/4" hose
Connectors
3 1/8" EIA Flg.
3 1/8" Unflg. (Flush)
Operating Position
Any
Load Coolant
Potable water
Finish
Black powder coat
Nominal Size 19 1/2" L x 3 1/2" Dia., (495 mm x 90 mm)
Input Flange
5 3/16" Dia. (132 mm)
Weight 15 lbs. 13 oz. (7.2 kg)
15 lbs. 5 oz. (7 kg)
Models
Power Rating
Frequency Range
and VSWR
Water
Temperature Range
Water Flow Rate
8765, 8766 (40kW Econoload®)
Models
8765
8766
Power Rating
40 kW continuous
Frequency Range
1.1 max. 1 kHz to 900 MHz (DC for continuity checks)
and VSWR
Water
+5°C to +60°C
Temperature Range
Water Flow Rate
8 gal./minute @ 5°C to 10 gpm @ 60°C
(30.4 liters/minute @ 5°C to 37.9 lpm @ 60°C)
Waterlines
1/2" FPT or 3/4" hose
Connectors
3 1/8" EIA Flg.
1/8" Unflg. (Flush)
Operating Position
Any
Load Coolant
Potable water
Finish
Black powder coat
Nominal Size
19 1/2" L x 3 1/2" Dia., (495 mm x 90 mm)
Input Flange
5 3/16" Dia. (132 mm)
Weight 15 lbs. 13 oz. (7.2 kg)
15 lbs. 5 oz. (7 kg)
8775, 8776 (50 kW Econoload®)
Waterlines
Connectors
Operating Position
Load Coolant
Finish
Nominal Size
Input Flange
Weight
8755
8756
30 kW continuous
1.1 max. 1 kHz to 900 MHz (DC for continuity checks)
+5°C to +60°C
7 gal./minute @ 5°C to 9 gpm @ 60°C
(26.6 liters/minute @ 5°C to 34.2 lpm @ 60°C)
1/2" FPT or 3/4" hose
3 1/8" EIA Flg.
3 1/8" Unflg. (Flush)
Any
Potable water
Black powder coat
19 1/2" L x 3 1/2" Dia., (495 mm x 90 mm)
5 3/16" Dia. (132 mm)
15 lbs. 13 oz. (7.2 kg)
15 lbs. 5 oz. (7 kg)
7/8" EIA Flg.
14 oz. (397 g)
8720, 8726 (5kW DIRECT WATER COOLED)
Models
8720
8726
Power Rating
5 kW continuous
Frequency Range
DC to 500 MHz at 1.1 max.,
DC to 500 MHz at 1.1 max.,
and VSWR
500 MHz to 900 MHz at 1.15 max.,
500 MHz to 2000 MHz at 1.25 max
900 MHz to 2000 MHz at 1.25 max.
Water
+5°C to +80°C
Temperature Range
Water Flow Rate
1 gal./minute @ 5°C to 4 gpm @ 80°C (3.8 liters/minute @ 5°C to 15.21 lpm @ 80°C)
Waterlines
1/2" FPT
3/4" hose
Connectors
1 5/8" EIA Flg.
QC type (Female LC normally supplied)
Operating Position
Any
Load Coolant
Potable water
Finish
Bright nickel plated
Nominal Size (excl. 8" waterlines) 8 1/32" L x 1 5/8" Dia.,
8 7/8" L x 1 5/8" Dia.,
(204 mm x 41 mm)
(225 mm x 41 mm)
Input Flange
3 1/2" Dia.
—
Weight
2 lbs. (900 g)
2 1/2 lbs. (1.1 kg)
Models
Power Rating
Frequency Range
and VSWR
Water
Temperature Range
Water Flow Rate
Waterlines
Connectors
Operating Position
Load Coolant
Finish
Nominal Size
Input Flange
Weight
8775
8776
50 kW continuous
1.1 max. 1 kHz to 900 MHz (DC for continuity checks)
+5°C to +60°C
9 gal./minute @ 5°C to 11 gpm @ 60°C
(34.2 liters/minute @ 5°C to 41.8 lpm @ 60°C)
1/2" FPT or 3/4" hose
3 1/8" EIA Flg.
3 1/8" Unflg. (Flush)
Any
Potable water
Black powder coat
19 1/2" L x 3 1/2" Dia., (495 mm x 90 mm)
5 3/16" Dia. (132 mm)
15 lbs. 13 oz. (7.2 kg)
15 lbs. 5 oz. (7 kg)
8792 (80 kW Econoload®)
8730A, 8731, 8738A (10kW Econoload®)
*Recommended for areas
with water quality conditions
Models
Power Rating
Frequency Range
and VSWR
Water
Temperature Range
Water Flow Rate
Waterlines
Connectors
Operating Position
Load Coolant
Finish
Nominal Size
Input Flange
Weight
27
8730A*
1.1 max. DC to 1 GHz
8731
10 kW continuous
1.1 max. 1 kHz to 1 GHz
(DC for continuity checks)
8738A*
1.1 max. DC to 1 GHz
+5°C to +60°C
4 gals./minute @ 5°C to 6 gpm @ 60°C (15.2 liters/minute @ 5°C to 22.8 lpm @ 60°C)
1/2" FPT or 3/4" hose
1 5/8" EIA Flg.
3 1/8" EIA Flg.
3 1/8" Unflg. (Flush)
Any
Potable water
Black powder coat
14 3/4" L x 2 3/4" Dia.,
14 3/4" L x 2 3/4" Dia.,
14 3/4" L x 2 3/4" Dia.,
(375 mm x 70 mm)
(375 mm x 70 mm)
(375 mm x 70 mm)
3 1/2" Dia. (89 mm)
5 3/16" Dia. (132 mm)
—
7 lbs. 14 oz. (3.6 kg)
6 lbs. 10 oz. (3 kg)
6 lbs. (2.8 kg)
Bird® Electronic Corporation 1-866-695-4569 www.bird-electronic.com
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
Power Rating
Frequency Range
and VSWR
Water
Temperature Range
Water Flow Rate
Connectors
Operating Position
Load Coolant
Finish
Nominal Size
Input Flange
Weight
80 kW continuous
1.15 max. 1 kHz to 800 MHz
(DC for continuity checks)
+5°C to +60°C
9 gal./minute @ 5°C to 12 gpm @ 60°C
(34.2 liters/minute @ 5°C to 45.6 lpm @ 60°C)
6 1/8" EIA Flg.
Any
Potable water
Black powder coat
34" L x 5" Dia., (864 mm x 127 mm)
8 1/8" Dia. (206 mm) add approximately 1 1/4"
(32 mm) to length for rear water fitting
30 lbs. 10 oz. (14 kg)
www.bird-electronic.com 1-866-695-4569 Bird® Electronic Corporation
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
28
Termaline® RF Coaxial Terminations
Termaline® RF Coaxial Terminations
8931-115, -230 SERIES (10 kW OIL DIELECTRIC)
Models
8931-**
8932-**
8936-**
Power Rating
10 kW continuous with blower on, 2.5 kW with blower off
Frequency Range
DC to 400 MHz at 1.15 max., 400 MHz to 1 GHz at 1.20 max.
and VSWR
Ambient
–40°C to +45°C
Temperature Range
Connector
QC-LC(F)
1 5/8" EIA flg.
3 1/8" EIA flg.
Operating Position
Horizontal only
Load Coolant
6 2/3 gal. (25.3 liters) silicone oil
Finish
Gray powder coat
Nominal Size 30 7/32" L x 9 1/2" W x 33 5/16" H, 30 7/32" L x 9 1/2" W x 33 5/16" H, 32 1/8" L x 9 1/2" W x 33 5/16" H,
(768 mm x 241 mm x 847 mm)
(768 mm x 241 mm x 847 mm)
(816 mm x 241 mm x 847 mm)
Weight
135 lbs. (61 kg)
137 lbs. (62 kg)
142 lbs. (64.8 kg)
8937-**
3 1/8" Unflg.
31 1/4" L x 9 1/2" W x 33 5/16" H,
(793 mm x 241 mm x 847 mm)
142 lbs. (64.5 kg)
NOTE: Both an 8892-333 blower control switch and an 8890-017 over-temperature interlock safety switch are included.
** AC power 115 or 230 Vac, 50/60 Hz (add suffix –115 or –230 to Model number)
8710 SERIES (1kW DIRECT WATER COOLED)
Models
8710F
8710M
8711F
8711M
Power Rating
1000 W continuous
Frequency Range
DC to 1 GHz at 1.1 max., 1 GHz to 3 GHz at 1.3 max., 3 GHz to 3.5 at 1.35 max.
and VSWR
Water
+8°C to +80°C
Temperature Range
Water Flow Rate
1 quart/minute @ 8°C to 3 gpm @ 80°C (.95 liters/minute @ 8°C to 2.84 lpm @ 80°C)
Waterlines
1/8" FPT
Connectors
N Female
N Male
C Female
C Male
Operating Position
Any
Load Coolant
Potable water
Finish
Silver plated
Nominal Size
(excl. 18" waterlines) 3 21/32" L x 11/16" Dia., (93 mm x 17 mm)
Weight
5 oz. (142 g)
5 oz. (142 g)
5 oz. (142 g)
5 oz. (142 g)
8713
8745, 8746 (20 kW Econoload®)
8755, 8756 (30kW Econoload®)
Models
8745
8746
Power Rating
20 kW continuous
Frequency Range
1.1 max. 1 kHz to 900 MHz (DC for continuity checks)
and VSWR
Water
+5°C to +60°C
Temperature Range
Water Flow Rate
6 gal./minute @ 5°C to 8 gpm @ 60°C
(22.8 liters/minute @ 5°C to 30.4 lpm @ 60°C)
Waterlines
1/2" FPT or 3/4" hose
Connectors
3 1/8" EIA Flg.
3 1/8" Unflg. (Flush)
Operating Position
Any
Load Coolant
Potable water
Finish
Black powder coat
Nominal Size 19 1/2" L x 3 1/2" Dia., (495 mm x 90 mm)
Input Flange
5 3/16" Dia. (132 mm)
Weight 15 lbs. 13 oz. (7.2 kg)
15 lbs. 5 oz. (7 kg)
Models
Power Rating
Frequency Range
and VSWR
Water
Temperature Range
Water Flow Rate
8765, 8766 (40kW Econoload®)
Models
8765
8766
Power Rating
40 kW continuous
Frequency Range
1.1 max. 1 kHz to 900 MHz (DC for continuity checks)
and VSWR
Water
+5°C to +60°C
Temperature Range
Water Flow Rate
8 gal./minute @ 5°C to 10 gpm @ 60°C
(30.4 liters/minute @ 5°C to 37.9 lpm @ 60°C)
Waterlines
1/2" FPT or 3/4" hose
Connectors
3 1/8" EIA Flg.
1/8" Unflg. (Flush)
Operating Position
Any
Load Coolant
Potable water
Finish
Black powder coat
Nominal Size
19 1/2" L x 3 1/2" Dia., (495 mm x 90 mm)
Input Flange
5 3/16" Dia. (132 mm)
Weight 15 lbs. 13 oz. (7.2 kg)
15 lbs. 5 oz. (7 kg)
8775, 8776 (50 kW Econoload®)
Waterlines
Connectors
Operating Position
Load Coolant
Finish
Nominal Size
Input Flange
Weight
8755
8756
30 kW continuous
1.1 max. 1 kHz to 900 MHz (DC for continuity checks)
+5°C to +60°C
7 gal./minute @ 5°C to 9 gpm @ 60°C
(26.6 liters/minute @ 5°C to 34.2 lpm @ 60°C)
1/2" FPT or 3/4" hose
3 1/8" EIA Flg.
3 1/8" Unflg. (Flush)
Any
Potable water
Black powder coat
19 1/2" L x 3 1/2" Dia., (495 mm x 90 mm)
5 3/16" Dia. (132 mm)
15 lbs. 13 oz. (7.2 kg)
15 lbs. 5 oz. (7 kg)
7/8" EIA Flg.
14 oz. (397 g)
8720, 8726 (5kW DIRECT WATER COOLED)
Models
8720
8726
Power Rating
5 kW continuous
Frequency Range
DC to 500 MHz at 1.1 max.,
DC to 500 MHz at 1.1 max.,
and VSWR
500 MHz to 900 MHz at 1.15 max.,
500 MHz to 2000 MHz at 1.25 max
900 MHz to 2000 MHz at 1.25 max.
Water
+5°C to +80°C
Temperature Range
Water Flow Rate
1 gal./minute @ 5°C to 4 gpm @ 80°C (3.8 liters/minute @ 5°C to 15.21 lpm @ 80°C)
Waterlines
1/2" FPT
3/4" hose
Connectors
1 5/8" EIA Flg.
QC type (Female LC normally supplied)
Operating Position
Any
Load Coolant
Potable water
Finish
Bright nickel plated
Nominal Size (excl. 8" waterlines) 8 1/32" L x 1 5/8" Dia.,
8 7/8" L x 1 5/8" Dia.,
(204 mm x 41 mm)
(225 mm x 41 mm)
Input Flange
3 1/2" Dia.
—
Weight
2 lbs. (900 g)
2 1/2 lbs. (1.1 kg)
Models
Power Rating
Frequency Range
and VSWR
Water
Temperature Range
Water Flow Rate
Waterlines
Connectors
Operating Position
Load Coolant
Finish
Nominal Size
Input Flange
Weight
8775
8776
50 kW continuous
1.1 max. 1 kHz to 900 MHz (DC for continuity checks)
+5°C to +60°C
9 gal./minute @ 5°C to 11 gpm @ 60°C
(34.2 liters/minute @ 5°C to 41.8 lpm @ 60°C)
1/2" FPT or 3/4" hose
3 1/8" EIA Flg.
3 1/8" Unflg. (Flush)
Any
Potable water
Black powder coat
19 1/2" L x 3 1/2" Dia., (495 mm x 90 mm)
5 3/16" Dia. (132 mm)
15 lbs. 13 oz. (7.2 kg)
15 lbs. 5 oz. (7 kg)
8792 (80 kW Econoload®)
8730A, 8731, 8738A (10kW Econoload®)
*Recommended for areas
with water quality conditions
Models
Power Rating
Frequency Range
and VSWR
Water
Temperature Range
Water Flow Rate
Waterlines
Connectors
Operating Position
Load Coolant
Finish
Nominal Size
Input Flange
Weight
27
8730A*
1.1 max. DC to 1 GHz
8731
10 kW continuous
1.1 max. 1 kHz to 1 GHz
(DC for continuity checks)
8738A*
1.1 max. DC to 1 GHz
+5°C to +60°C
4 gals./minute @ 5°C to 6 gpm @ 60°C (15.2 liters/minute @ 5°C to 22.8 lpm @ 60°C)
1/2" FPT or 3/4" hose
1 5/8" EIA Flg.
3 1/8" EIA Flg.
3 1/8" Unflg. (Flush)
Any
Potable water
Black powder coat
14 3/4" L x 2 3/4" Dia.,
14 3/4" L x 2 3/4" Dia.,
14 3/4" L x 2 3/4" Dia.,
(375 mm x 70 mm)
(375 mm x 70 mm)
(375 mm x 70 mm)
3 1/2" Dia. (89 mm)
5 3/16" Dia. (132 mm)
—
7 lbs. 14 oz. (3.6 kg)
6 lbs. 10 oz. (3 kg)
6 lbs. (2.8 kg)
Bird® Electronic Corporation 1-866-695-4569 www.bird-electronic.com
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
Power Rating
Frequency Range
and VSWR
Water
Temperature Range
Water Flow Rate
Connectors
Operating Position
Load Coolant
Finish
Nominal Size
Input Flange
Weight
80 kW continuous
1.15 max. 1 kHz to 800 MHz
(DC for continuity checks)
+5°C to +60°C
9 gal./minute @ 5°C to 12 gpm @ 60°C
(34.2 liters/minute @ 5°C to 45.6 lpm @ 60°C)
6 1/8" EIA Flg.
Any
Potable water
Black powder coat
34" L x 5" Dia., (864 mm x 127 mm)
8 1/8" Dia. (206 mm) add approximately 1 1/4"
(32 mm) to length for rear water fitting
30 lbs. 10 oz. (14 kg)
www.bird-electronic.com 1-866-695-4569 Bird® Electronic Corporation
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
28
Termaline® RF Coaxial Terminations
Tenuline® RF Coaxial Attenuators
8631, 8635, 8638 (10kW Moduload®)
Models
8631
8635
8638
Power Rating
10 kW continuous
Frequency Range
1.1 max. 1 kHz to 1000 MHz (DC for continuity checks)
and VSWR
(per power level and coolant mix)
Ambient
Temperature Range
≤10 kW: (35% Water) +5°C to +45°C;
≤10 kW: (35% Ethylene Glycol/65% Water) -20°C to +35°C
Connector
1 5/8" EIA Flg.
3 1/8" EIA Flg.
3 1/8" Unflg.
Operating Position
Horizontal only
Load Coolant
10 pts (4.75 liters) 100% water or 65% water/35%
industrial Ethylene Glycol. With forced-air cooling
Finish
Gray powder coat
Nominal Size
22 1/8" L x 15 15/16" W x 15 13/16" D, (562 mm x 405 mm x 402 mm)
Weight
110 lbs. (50 kg)
AC power
115 V models: 9 1/2 A nominal @ 115V ± 10% 60Hz;
230 V models: 4 3/4 A nominal @ 230V ± 10% 50Hz
Optional Dolly
P/N 6771-011 (page 39)
8645, 8646 (25 kW Moduload )
Models
8645
8646
Power Rating
25 kW continuous
Frequency Range
1.1 max. 1 kHz to 900 MHz
and VSWR
(DC for continuity checks)
Ambient
(per power level and coolant mix)
Temperature Range
≤25 kW: (100% Water) +5°C to +30°C;
<20 kW: (100% Water) +5°C to +45°C;
≤25 kW: (35% Ethylene Glycol/65% Water)
-20°C to +25°C;
<20 kW: (35% Ethylene Glycol/65% Water)
-20°C to +35°C
Connector
3 1/8" EIA Flg.
3 1/8" Unflg.
Operating Position
Horizontal only
Load Coolant
9 qts. (8.5 liters) 100% water or 65% water/35%
industrial Ethylene Glycol. With forced-air cooling
Finish
Gray powder coat
Nominal Size
25 15/16" L x 19 5/32" W x 19 9/16" D,
(659 mm x 487 mm x 497 mm)
Weight
155 lbs. (70 kg)
AC power 115 V models: 11 A nominal @ 115V ± 10% 60Hz;
230 V models: 5 1/2 A nominal @ 230V ± 10% 50Hz
Optional Dolly
P/N 6771-011 (page 39)
®
Power
115 V 60 Hz
230 V 50 Hz
230 V 60 Hz
Add Suffix to Model
–115
–230
–230–6
* Attenuator Model Number Definition:
100 – A – QQC – XX
Product Type
A, SA, WA - Attenuator
Power Rating (watts)
Connector Gender
MF - Male/Female
FF - Female/Female
+ Call for other connector options.
Power
Add Suffix to Model
115 V 60 Hz
230 V 60 Hz
–115
–230–6
8655, 8656 (50 kW Moduload )
Models
8655
8656
Power Rating
50 kW continuous
Frequency Range
1.1 max. 1 kHz to 900 MHz
and VSWR
(DC for continuity checks)
Ambient
(per power level and coolant mix)
Temperature Range
≥40 kW: (100% Water) +5°C to +30°C;
<40 kW: (100% Water) +5°C to +45°C;
≥40 kW: (35% Ethylene Glycol/65% Water)
-20°C to +25°C;
<40 kW: (35% Ethylene Glycol/65% Water)
-20°C to +35°C
Connector
3 1/8" EIA Flg.
3 1/8" Unflg. (Flush)
Operating Position
Horizontal only
Load Coolant 17 qts. (16.1 liters) 100% water or 65% water/35%
industrial Ethylene Glycol. With forced-air cooling
Finish
Gray powder coat
Nominal Size
46 1/2" L x 19 5/32" W x 19 9/16" D,
(659 mm x 487 mm x 497 mm)
Weight
275 lbs. (125 kg)
AC power 115 V models: 14 A nominal @ 115V ± 10% 60Hz;
230 V models: 7 A nominal @ 230V ± 10% 50Hz
Optional Dolly
P/N 6772-011 (page 39)
0.5-A-MFA SERIES 0.5 WATT BI-DIRECTIONAL
Peak Power 500 mW
Connectors SMA (Male and Female)
Frequency Range DC to 2 GHz at 1.10:1 max.,
and VSWR 2 GHz to 4 GHz at 1.15:1 max.,
4 GHz to 8 GHz at 1.20:1 max.,
8 GHz to 12.4 GHz at 1.25:1 max.,
12.4 GHz to 18 GHz at 1.35:1
Operating Temp. –55°C to +125°C
Range
Coolant Dry (Convection cooled)
Finish Stainless steel
Nominal Size (with N-type connectors): 0.860" L x 0.30" Dia.,
(21.9 mm x 7.7 mm) except 0.985" L
(25.1 mm) for 30 dB model
Weight 0.2 oz. (5.2 g)
Power
115 V 60 Hz
230 V 50 Hz
230 V 60 Hz
8578A100, 8578A150 (10kW, 15kW, Dry, Forced Air Load)
Models
8578A100
8578A150
Power Rating
10 kW continuous
15 kW continuous
Frequency Range 1.15:1, DC to 108 MHz
87.5 - 108 MHz
and VSWR
Ambient Temp.
–40°C to +40°C
Connector 1 5/8" EIA Flanged (Swivel), 3 1/8" Unflg. option
Operating Position Any (except blockage of air inlets and exhaust)
Load Coolant
Dry (forced air)
Resistors Tubular type, parallel connection, 50 ohms nominal
Finish
Gray powder coat
Nominal Size
39 7/32" H x 16 15/32" W x 13 7/16" D,
(996 mm x 418 mm x 341 mm)
Weight
70 lbs. (31.8 kg)
AC power
115/230 ± 10% Vac,
50/60 Hz 8.6 amps max. @ 115 Vac
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
dB Atten.
1
2
3
6
10
20
30
dB Atten.
Add Suffix to Model
–115–6
–230–5
–230–6
All Attenuators 150W or lower are Bi-Directional
Models
2-A-MFA Series
(2 WATT)
2-A SERIES
(2 WATT)*
3-A-MFB-K1
AND 3-A
MFB-XX
5-A
(5 WATT)*
Connectors
SMA
(Male or Female)
N, BNC, TNC
(Male or Female)
BNC
(Male or Female)
N, BNC, TNC
(Male or Female)
Frequency Range
and VSWR
Ambient Temp.
Finish
Nominal Size
Weight
Accuracy ± dB DC–18 GHz
±0.3 dB
±0.3 dB
±0.3 dB
±0.3 dB
±0.5 dB
±0.6 dB
±1.0 dB
"XX" Value
01
02
03
06
10
20
30
ACCURACY 2-A through 500-WA SERIES
1
2
3
6
10
20
30
Accuracy
± dB DC–1 GHz
0.3
0.3
0.3
0.4
0.4
0.5
0.8
5-A-FFI-XX
10-A-FFI-XX
(5 WATT with
(10 WATT with
Interseries
Interseries
Connectors)
Connectors)
Interchangeable. Use optional 4240
Interseries connector
adapter kits, or equivalent.
Accuracy
± dB 1–4 GHz
0.5
0.5
0.5
0.6
0.8
1.0
1.3
10-A
(10 WATT)*
"XX" Value
01
02
03
06
10
20
30
25-A
(25 WATT)*
N, BNC, TNC
(Male or Female)
DC to 1 GHz at 1.10:1 max., 1 GHz to 4 GHz at 1.25:1 max.
–40°C to +40°C
Silver or Tri-alloy plated, except Nickel plate for BNC
Nickel Plated
1.32" L x 0.42" Dia.,
(33.6 mm x 10.7 mm)
(with N-type connectors):
2.2" L x 0.8" Dia.,
(55.9 mm x 20.4 mm)
1.4" L x .50 Dia.
0.4 oz. (11.4 g)
3.1 oz. (88 g)
—
50-A
(50 WATT)
75-A
(75 WATT)
(with N-type connectors):
2.2" L x 0.8" Dia.,
1.600" L x 0.79" Dia.
(55.9 mm x 20.4 mm)
3.1 oz. (88 g)
100-A*
(100 WATT)
Connectors
Bird® Electronic Corporation 1-866-695-4569 www.bird-electronic.com
0.5-A-MFA SERIES 0.5 WATT BI-DIRECTIONAL
®
Models
29
Attenuation Value in dB
01 – 1 dB
10 – 10 dB
02 – 2 dB
20 – 20 dB
03 – 3 dB
30 – 30 dB
06 – 6 dB
Connectors+
A - SMA
B - BNC
N-N
T - TNC
E - Iec 7/16
Frequency Range
and VSWR
Ambient
Temperature Range
Operating Position
Finish
Nominal Size
(with N-type
Connectors)
Weight
—
Black anodized. Silver or Tri-alloy plated connectors
1.600" L x 2.3" Dia.
6.2 oz. (177 g)
100-SA
(100 WATT )
(with N-type
connectors):
2.2" L x 2.3" Dia.,
(66.1 mm x 58.5 mm)
(with N-type
connectors):
5.3" L x 2.3" Dia.,
(134.7 mm x 58.5 mm)
4 oz. (176.7 g)
9 oz. (373.4 g)
150-A, WA***
(150 WATT)
300-A, WA***
(300 WATT)
500-WA
(500 WATT)**
N, TNC,
or IEC 7/16
N, BNC, TNC, IEC 7/16
DC to 1 GHz at 1.10:1 max., 1 GHz to 2.4 GHz at 1.25:1 max.
–40°C to +40°C
Any
Vertical
Vertical
Fin Vertical
Vertical
Vertical
Any, except
mounting
surface up
Black anodized. Silver or Tri-alloy plated connectors
5.3" L x 2.3" Dia.,
(134.7 mm x 58.5 mm)
7.3" L x 2.3" Dia.,
(185.5 mm
x 58.5 mm)
6.4" H x 2.6" W x 6.8" D,
(162.6 mm x 66 mm
x 172.8 mm)
7.30" H x 2.75" W
x 2.75" D, (192.8 mm x
69.9 mm x 69.9 mm)
11.9" H x 2.6" W
x 6.8" D,
(302 mm x
66 mm x 173 mm)
10.9" H x
5.3" W
x 6.8" D,
(277 mm x 137 mm
x 173 mm)
11.31" L x
5.4" W x 4.3" H
(285.3 mm x
137.2 mm
x 109.3 mm)
1.0 lb. (0.57 kg)
1.6 lbs. (0.73 kg)
4.3 lbs. (1.95 kg)
2.82 lbs. (1.29 kg)
6.5 lbs. (2.95 kg)
12 lbs. (5.45 kg)
7.9 lbs. (3.6 kg)
* Also available in -40dB
** 4 Mounting Holes, Centers and Size: 1.812" x 7.687", typical 10-32 thread x 0.5" D
*** WA SERIES Compact Size
www.bird-electronic.com 1-866-695-4569 Bird® Electronic Corporation
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
30
Termaline® RF Coaxial Terminations
Tenuline® RF Coaxial Attenuators
8631, 8635, 8638 (10kW Moduload®)
Models
8631
8635
8638
Power Rating
10 kW continuous
Frequency Range
1.1 max. 1 kHz to 1000 MHz (DC for continuity checks)
and VSWR
(per power level and coolant mix)
Ambient
Temperature Range
≤10 kW: (35% Water) +5°C to +45°C;
≤10 kW: (35% Ethylene Glycol/65% Water) -20°C to +35°C
Connector
1 5/8" EIA Flg.
3 1/8" EIA Flg.
3 1/8" Unflg.
Operating Position
Horizontal only
Load Coolant
10 pts (4.75 liters) 100% water or 65% water/35%
industrial Ethylene Glycol. With forced-air cooling
Finish
Gray powder coat
Nominal Size
22 1/8" L x 15 15/16" W x 15 13/16" D, (562 mm x 405 mm x 402 mm)
Weight
110 lbs. (50 kg)
AC power
115 V models: 9 1/2 A nominal @ 115V ± 10% 60Hz;
230 V models: 4 3/4 A nominal @ 230V ± 10% 50Hz
Optional Dolly
P/N 6771-011 (page 39)
8645, 8646 (25 kW Moduload )
Models
8645
8646
Power Rating
25 kW continuous
Frequency Range
1.1 max. 1 kHz to 900 MHz
and VSWR
(DC for continuity checks)
Ambient
(per power level and coolant mix)
Temperature Range
≤25 kW: (100% Water) +5°C to +30°C;
<20 kW: (100% Water) +5°C to +45°C;
≤25 kW: (35% Ethylene Glycol/65% Water)
-20°C to +25°C;
<20 kW: (35% Ethylene Glycol/65% Water)
-20°C to +35°C
Connector
3 1/8" EIA Flg.
3 1/8" Unflg.
Operating Position
Horizontal only
Load Coolant
9 qts. (8.5 liters) 100% water or 65% water/35%
industrial Ethylene Glycol. With forced-air cooling
Finish
Gray powder coat
Nominal Size
25 15/16" L x 19 5/32" W x 19 9/16" D,
(659 mm x 487 mm x 497 mm)
Weight
155 lbs. (70 kg)
AC power 115 V models: 11 A nominal @ 115V ± 10% 60Hz;
230 V models: 5 1/2 A nominal @ 230V ± 10% 50Hz
Optional Dolly
P/N 6771-011 (page 39)
®
Power
115 V 60 Hz
230 V 50 Hz
230 V 60 Hz
Add Suffix to Model
–115
–230
–230–6
* Attenuator Model Number Definition:
100 – A – QQC – XX
Product Type
A, SA, WA - Attenuator
Power Rating (watts)
Connector Gender
MF - Male/Female
FF - Female/Female
+ Call for other connector options.
Power
Add Suffix to Model
115 V 60 Hz
230 V 60 Hz
–115
–230–6
8655, 8656 (50 kW Moduload )
Models
8655
8656
Power Rating
50 kW continuous
Frequency Range
1.1 max. 1 kHz to 900 MHz
and VSWR
(DC for continuity checks)
Ambient
(per power level and coolant mix)
Temperature Range
≥40 kW: (100% Water) +5°C to +30°C;
<40 kW: (100% Water) +5°C to +45°C;
≥40 kW: (35% Ethylene Glycol/65% Water)
-20°C to +25°C;
<40 kW: (35% Ethylene Glycol/65% Water)
-20°C to +35°C
Connector
3 1/8" EIA Flg.
3 1/8" Unflg. (Flush)
Operating Position
Horizontal only
Load Coolant 17 qts. (16.1 liters) 100% water or 65% water/35%
industrial Ethylene Glycol. With forced-air cooling
Finish
Gray powder coat
Nominal Size
46 1/2" L x 19 5/32" W x 19 9/16" D,
(659 mm x 487 mm x 497 mm)
Weight
275 lbs. (125 kg)
AC power 115 V models: 14 A nominal @ 115V ± 10% 60Hz;
230 V models: 7 A nominal @ 230V ± 10% 50Hz
Optional Dolly
P/N 6772-011 (page 39)
0.5-A-MFA SERIES 0.5 WATT BI-DIRECTIONAL
Peak Power 500 mW
Connectors SMA (Male and Female)
Frequency Range DC to 2 GHz at 1.10:1 max.,
and VSWR 2 GHz to 4 GHz at 1.15:1 max.,
4 GHz to 8 GHz at 1.20:1 max.,
8 GHz to 12.4 GHz at 1.25:1 max.,
12.4 GHz to 18 GHz at 1.35:1
Operating Temp. –55°C to +125°C
Range
Coolant Dry (Convection cooled)
Finish Stainless steel
Nominal Size (with N-type connectors): 0.860" L x 0.30" Dia.,
(21.9 mm x 7.7 mm) except 0.985" L
(25.1 mm) for 30 dB model
Weight 0.2 oz. (5.2 g)
Power
115 V 60 Hz
230 V 50 Hz
230 V 60 Hz
8578A100, 8578A150 (10kW, 15kW, Dry, Forced Air Load)
Models
8578A100
8578A150
Power Rating
10 kW continuous
15 kW continuous
Frequency Range 1.15:1, DC to 108 MHz
87.5 - 108 MHz
and VSWR
Ambient Temp.
–40°C to +40°C
Connector 1 5/8" EIA Flanged (Swivel), 3 1/8" Unflg. option
Operating Position Any (except blockage of air inlets and exhaust)
Load Coolant
Dry (forced air)
Resistors Tubular type, parallel connection, 50 ohms nominal
Finish
Gray powder coat
Nominal Size
39 7/32" H x 16 15/32" W x 13 7/16" D,
(996 mm x 418 mm x 341 mm)
Weight
70 lbs. (31.8 kg)
AC power
115/230 ± 10% Vac,
50/60 Hz 8.6 amps max. @ 115 Vac
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
dB Atten.
1
2
3
6
10
20
30
dB Atten.
Add Suffix to Model
–115–6
–230–5
–230–6
All Attenuators 150W or lower are Bi-Directional
Models
2-A-MFA Series
(2 WATT)
2-A SERIES
(2 WATT)*
3-A-MFB-K1
AND 3-A
MFB-XX
5-A
(5 WATT)*
Connectors
SMA
(Male or Female)
N, BNC, TNC
(Male or Female)
BNC
(Male or Female)
N, BNC, TNC
(Male or Female)
Frequency Range
and VSWR
Ambient Temp.
Finish
Nominal Size
Weight
Accuracy ± dB DC–18 GHz
±0.3 dB
±0.3 dB
±0.3 dB
±0.3 dB
±0.5 dB
±0.6 dB
±1.0 dB
"XX" Value
01
02
03
06
10
20
30
ACCURACY 2-A through 500-WA SERIES
1
2
3
6
10
20
30
Accuracy
± dB DC–1 GHz
0.3
0.3
0.3
0.4
0.4
0.5
0.8
5-A-FFI-XX
10-A-FFI-XX
(5 WATT with
(10 WATT with
Interseries
Interseries
Connectors)
Connectors)
Interchangeable. Use optional 4240
Interseries connector
adapter kits, or equivalent.
Accuracy
± dB 1–4 GHz
0.5
0.5
0.5
0.6
0.8
1.0
1.3
10-A
(10 WATT)*
"XX" Value
01
02
03
06
10
20
30
25-A
(25 WATT)*
N, BNC, TNC
(Male or Female)
DC to 1 GHz at 1.10:1 max., 1 GHz to 4 GHz at 1.25:1 max.
–40°C to +40°C
Silver or Tri-alloy plated, except Nickel plate for BNC
Nickel Plated
1.32" L x 0.42" Dia.,
(33.6 mm x 10.7 mm)
(with N-type connectors):
2.2" L x 0.8" Dia.,
(55.9 mm x 20.4 mm)
1.4" L x .50 Dia.
0.4 oz. (11.4 g)
3.1 oz. (88 g)
—
50-A
(50 WATT)
75-A
(75 WATT)
(with N-type connectors):
2.2" L x 0.8" Dia.,
1.600" L x 0.79" Dia.
(55.9 mm x 20.4 mm)
3.1 oz. (88 g)
100-A*
(100 WATT)
Connectors
Bird® Electronic Corporation 1-866-695-4569 www.bird-electronic.com
0.5-A-MFA SERIES 0.5 WATT BI-DIRECTIONAL
®
Models
29
Attenuation Value in dB
01 – 1 dB
10 – 10 dB
02 – 2 dB
20 – 20 dB
03 – 3 dB
30 – 30 dB
06 – 6 dB
Connectors+
A - SMA
B - BNC
N-N
T - TNC
E - Iec 7/16
Frequency Range
and VSWR
Ambient
Temperature Range
Operating Position
Finish
Nominal Size
(with N-type
Connectors)
Weight
—
Black anodized. Silver or Tri-alloy plated connectors
1.600" L x 2.3" Dia.
6.2 oz. (177 g)
100-SA
(100 WATT )
(with N-type
connectors):
2.2" L x 2.3" Dia.,
(66.1 mm x 58.5 mm)
(with N-type
connectors):
5.3" L x 2.3" Dia.,
(134.7 mm x 58.5 mm)
4 oz. (176.7 g)
9 oz. (373.4 g)
150-A, WA***
(150 WATT)
300-A, WA***
(300 WATT)
500-WA
(500 WATT)**
N, TNC,
or IEC 7/16
N, BNC, TNC, IEC 7/16
DC to 1 GHz at 1.10:1 max., 1 GHz to 2.4 GHz at 1.25:1 max.
–40°C to +40°C
Any
Vertical
Vertical
Fin Vertical
Vertical
Vertical
Any, except
mounting
surface up
Black anodized. Silver or Tri-alloy plated connectors
5.3" L x 2.3" Dia.,
(134.7 mm x 58.5 mm)
7.3" L x 2.3" Dia.,
(185.5 mm
x 58.5 mm)
6.4" H x 2.6" W x 6.8" D,
(162.6 mm x 66 mm
x 172.8 mm)
7.30" H x 2.75" W
x 2.75" D, (192.8 mm x
69.9 mm x 69.9 mm)
11.9" H x 2.6" W
x 6.8" D,
(302 mm x
66 mm x 173 mm)
10.9" H x
5.3" W
x 6.8" D,
(277 mm x 137 mm
x 173 mm)
11.31" L x
5.4" W x 4.3" H
(285.3 mm x
137.2 mm
x 109.3 mm)
1.0 lb. (0.57 kg)
1.6 lbs. (0.73 kg)
4.3 lbs. (1.95 kg)
2.82 lbs. (1.29 kg)
6.5 lbs. (2.95 kg)
12 lbs. (5.45 kg)
7.9 lbs. (3.6 kg)
* Also available in -40dB
** 4 Mounting Holes, Centers and Size: 1.812" x 7.687", typical 10-32 thread x 0.5" D
*** WA SERIES Compact Size
www.bird-electronic.com 1-866-695-4569 Bird® Electronic Corporation
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
30
Tenuline® RF Coaxial Attenuators
Accessories
1000-WA SERIES (1000 WATT)
Connectors N, TNC, or IEC 7/16
Coolant Dry (Convection cooled)
Operating Position Any, except mounting surface up
Frequency Range DC to 1 GHz at 1.10:1 max.,
and VSWR 1 GHz to 2.4 GHz at 1.25:1 max.
Attenuator Operation Unidirectional.
Standard attenuation values 3, 6, 10, 20 and
30 dB; others available on request
Finish Black anodized. Silver or Tri-alloy plated connectors
Nominal Size (with female N connector; excludes removable feet),
18.65" L x 10.53" W x 4.9" H
(587.6 mm x 229.4 mm x 137.2 mm)
4 Mounting Holes, 1.885" x 14.40", typical 1/4-20 thread x 0.5"D
Centers and Size
Weight Approximately 26.5 lbs. (12.1 kg)
600-A-QFFN (600 WATT UNI-DIRECTIONAL)
Connectors QC N-type Female
Frequency Range DC to 1 GHz at 1.10:1 max.,
and VSWR 1 GHz to 2.4 GHz at 1.25:1 max.
Operating Position Vertical
Coolant Dry (Convection cooled)
Finish Black anodized. Silver or Tri-alloy plated connectors
Nominal Size 13.15" L x 8.875" H x 9.65" W
Weight 21.5 lbs. (kg)
Accessories Quick disconnect options (page 37)
COMBINER / DIVIDER
Models
Power Rating
Frequency
Insertion Loss
ACCURACY 1000-WA
dB Atten.
3
6
10
20
30
MINIATURE COAXIAL COUPLER
Models
50-AC-FFA-XX
Frequency Range
0.5 GHz to 1.0 GHz
Coupling Factor
10 , 20, 30 dB
Directivity
25 dB, minimum
Frequency
±0.75 dB, maximum
Sensitivity
VSWR
1.15:1, maximum
(primary and secondary line)
Reflected Power
5 W average, 3 kW peak
Insertion Loss 0.2 dB, excluding coupled power, 0.8 dB true
Maximum
+105°C (221°F)
Operating Temp.
Dimensions
3.6" L x 0.86" W x 0.42" H
Weight
1.3 oz (37 g)
Accuracy ± dB DC–1 GHz
0.5
0.6
0.6
0.6
1.0
Accuracy ± dB 1–2.4 GHz
+1.0 dB/-0.5 dB
+1.2 dB/-0.5 dB
+1.5 dB/-0.5 dB
+1.5 dB/-0.5 dB
+1.5 dB/-0.5 dB
"XX" Value
03
06
10
20
30
Isolation
Matching
Finish
Nominal Size
Connectors
8323
(100 WATT)
8322
(200 WATT)
8325
(500 WATT)
8327-300
(1kW)
8329-300
(2 kW)
8329-300
8329-300
with BA-300-115 (4kW) with BA-300-230 (4kW)
Power Rating
100 W
continuous
200 W
continuous
500 W
continuous
1000 W
continuous
2000 W
continuous
4000 W continuous
with blower on, 1000 W with blower off
Frequency Range
and VSWR
Attenuation
Accuracy
Ambient
Temperature Range
Connectors
Coolant
Operating Position
Finish
Nominal Size
Weight
Note
Input 1.1 max. DC to 500 MHz
30 dB
±0.5 dB (Calibration Data supplied for 30, 100, 200, 300, 400, and 500 MHz which is accurate to ±0.2dB)
–40°C to +45°C
0.35 gal.
(1.3 liters)
refined mineral oil
10 11/32" L x 8 1/2" H
x 5 15/16",
(263 mm x 216 mm
x 151 mm)
11 lbs. (5 kg)
—
31
QC type (Female N normally supplied)
0.7 gal.
0.9 gal.
2.9 gal.
2.9 gal.
(2.65 liters)
(3.4 liters)
(11 liters)
(11 liters)
refined mineral oil refined mineral oil
refined mineral oil silicone oil
Horizontal only
Gray powder coat
17 1/2" L x 8 1/2" H
17 1/2" L x 8 1/2" H
x 5 15/16",
x 5 15/16",
23 15/16" L x 17 3/16" H x 7 1/8",
(445 mm x 216 mm
(445 mm x 216 mm
(596 mm x 437 mm x 181 mm)
x 151 mm)
x 151 mm)
19 lbs. (9 kg)
25 lbs. (11 kg)
57 lbs. (26 kg)
—
—
Bird® Electronic Corporation 1-866-695-4569 www.bird-electronic.com
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
Overload thermoswitch
P/N 8329-028 is optional
2-AD-FFN-X
1 watt
2 watts
30-AD-FFA-2
±1.0 dB, maximum
1.20:1, maximum
(primary and secondary line)
100 W average
25 dB (excluding coupled power)
+105°C (221°F)
5.2" L x 1.85" W x 0.812" H
8 oz.
30-AD-FFN-2
30 watts into 1.15:1; 10
watts into 1.50:1; 1 watt into open *
2-500 MHz
2.0 to 2.5 GHz
1.35 dB
0.6 dB
(above 9 dB split) (above 3 dB split)
20 dB min.
30 dB
(J2 to J3)
800 to 2.4 GHz
0.5 dB max
(above 3 dB split)
25 dB min.
(J2 to J3)
VSWR
Housing
Models
1-AD-CCC-8
100-CC-FFA-XX
800 to 3500 MHz
20, 30 dB
18 dB, minimum
1:35:1 max.
1.17:1 max.
1.2:1 max.
Phase balance
of 0.5 degrees.
Amplitude balance
as low as 0.1 dB
1.5 degree phase
dB amplitude
(typically 0.3 dB)
2 degree phase
(typically 0.5) 0.5 dB amplitude
Aluminum
Aluminum
Aluminum
Iridite
Tri-alloy
5.10" L x 4.25" W
x 1.20" H
TNC
2.75" L x 2.75" W
x 1.062" H
Female (N)
Yellow Iridite
4.25" L x 3.14" W
x .5" H
SMA (F)
2.20" L x 2.72" W
x 1.04" H
N-Type (F)
100-AD-FFN-2**
100 watts cw *
350-AD-FFN-2*
350 watts
into matched loads;
150 watts into
mismatched loads *
460 to 970 MHz
806 to 906 MHz
3.25 dB max
0.4 dB
(above 3 dB split)
20 dB min.
20 dB min.
(J2 to J3)
1.2:1 max.
Input: (J1) 1.3:1 max;
(all ports)
Output: (J2, J3)
1.15:1 max.
1 degree phase
(typically 0.2)
2 degree max
(0.1 dB amplitude
(typically 0.05 dB)
Aluminum,
Aluminum
silver plated
Grey acrylic
Tri-alloy
urethane
per fed. Std. 26492
1.115" H x 3.00" W
3.27" L x 2.50" W
x 3.00" D
x 0.80" H
Female (N)
Female (N)
* When mounted to a heat sink capable of maintaining the case temperature at or below 100 degrees C.
** Weatherproof
50-OHM COAXIAL SELECTOR SWITCHES — 72, 73, 74 SERIES
Frequency Range DC to 10 GHz
Maximum 500 volts rms
RF Voltage
Attenuation to 75 dB (cross talk)
Unused Channel
Ambient Temp. -60°C to +65°C (-76°F to +149°F)
Weight Varies by model, approx. 2 1/2 lbs. (1.1 kg)
2.9 gal.
(11 liters)
silicone oil with forced-air cooling
23 15/32" L x 22 1/16" H x 7 1/8",
596 mm x 560 mm x 181 mm)
70 1/2 lbs. (32 kg)
Overload thermoswitch
P/N 8329-028 is optional.
When ordered as a package,
attenuator and blower are factory
assembled at no additional charge.
TYPICAL OPERATING VALUES
FREQUENCY
VSWR
100 MHz
1000 MHz
4000 MHz
Negligible
1.06 max.
1.30 max.
Model
Positions
Coaxial Circuits
7422
2
1
INSERTION LOSS
0.02 dB
0.09 dB
0.22 dB
7441
3
1
7431
4
1
MAX RF POWER
RATING @ 65°C
850 W
200 W
75 W
74
6
1
718
8
1
7181
10
1
72-2
2
2
72-R
reversing
2
www.bird-electronic.com 1-866-695-4569 Bird® Electronic Corporation
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
32
Tenuline® RF Coaxial Attenuators
Accessories
1000-WA SERIES (1000 WATT)
Connectors N, TNC, or IEC 7/16
Coolant Dry (Convection cooled)
Operating Position Any, except mounting surface up
Frequency Range DC to 1 GHz at 1.10:1 max.,
and VSWR 1 GHz to 2.4 GHz at 1.25:1 max.
Attenuator Operation Unidirectional.
Standard attenuation values 3, 6, 10, 20 and
30 dB; others available on request
Finish Black anodized. Silver or Tri-alloy plated connectors
Nominal Size (with female N connector; excludes removable feet),
18.65" L x 10.53" W x 4.9" H
(587.6 mm x 229.4 mm x 137.2 mm)
4 Mounting Holes, 1.885" x 14.40", typical 1/4-20 thread x 0.5"D
Centers and Size
Weight Approximately 26.5 lbs. (12.1 kg)
600-A-QFFN (600 WATT UNI-DIRECTIONAL)
Connectors QC N-type Female
Frequency Range DC to 1 GHz at 1.10:1 max.,
and VSWR 1 GHz to 2.4 GHz at 1.25:1 max.
Operating Position Vertical
Coolant Dry (Convection cooled)
Finish Black anodized. Silver or Tri-alloy plated connectors
Nominal Size 13.15" L x 8.875" H x 9.65" W
Weight 21.5 lbs. (kg)
Accessories Quick disconnect options (page 37)
COMBINER / DIVIDER
Models
Power Rating
Frequency
Insertion Loss
ACCURACY 1000-WA
dB Atten.
3
6
10
20
30
MINIATURE COAXIAL COUPLER
Models
50-AC-FFA-XX
Frequency Range
0.5 GHz to 1.0 GHz
Coupling Factor
10 , 20, 30 dB
Directivity
25 dB, minimum
Frequency
±0.75 dB, maximum
Sensitivity
VSWR
1.15:1, maximum
(primary and secondary line)
Reflected Power
5 W average, 3 kW peak
Insertion Loss 0.2 dB, excluding coupled power, 0.8 dB true
Maximum
+105°C (221°F)
Operating Temp.
Dimensions
3.6" L x 0.86" W x 0.42" H
Weight
1.3 oz (37 g)
Accuracy ± dB DC–1 GHz
0.5
0.6
0.6
0.6
1.0
Accuracy ± dB 1–2.4 GHz
+1.0 dB/-0.5 dB
+1.2 dB/-0.5 dB
+1.5 dB/-0.5 dB
+1.5 dB/-0.5 dB
+1.5 dB/-0.5 dB
"XX" Value
03
06
10
20
30
Isolation
Matching
Finish
Nominal Size
Connectors
8323
(100 WATT)
8322
(200 WATT)
8325
(500 WATT)
8327-300
(1kW)
8329-300
(2 kW)
8329-300
8329-300
with BA-300-115 (4kW) with BA-300-230 (4kW)
Power Rating
100 W
continuous
200 W
continuous
500 W
continuous
1000 W
continuous
2000 W
continuous
4000 W continuous
with blower on, 1000 W with blower off
Frequency Range
and VSWR
Attenuation
Accuracy
Ambient
Temperature Range
Connectors
Coolant
Operating Position
Finish
Nominal Size
Weight
Note
Input 1.1 max. DC to 500 MHz
30 dB
±0.5 dB (Calibration Data supplied for 30, 100, 200, 300, 400, and 500 MHz which is accurate to ±0.2dB)
–40°C to +45°C
0.35 gal.
(1.3 liters)
refined mineral oil
10 11/32" L x 8 1/2" H
x 5 15/16",
(263 mm x 216 mm
x 151 mm)
11 lbs. (5 kg)
—
31
QC type (Female N normally supplied)
0.7 gal.
0.9 gal.
2.9 gal.
2.9 gal.
(2.65 liters)
(3.4 liters)
(11 liters)
(11 liters)
refined mineral oil refined mineral oil
refined mineral oil silicone oil
Horizontal only
Gray powder coat
17 1/2" L x 8 1/2" H
17 1/2" L x 8 1/2" H
x 5 15/16",
x 5 15/16",
23 15/16" L x 17 3/16" H x 7 1/8",
(445 mm x 216 mm
(445 mm x 216 mm
(596 mm x 437 mm x 181 mm)
x 151 mm)
x 151 mm)
19 lbs. (9 kg)
25 lbs. (11 kg)
57 lbs. (26 kg)
—
—
Bird® Electronic Corporation 1-866-695-4569 www.bird-electronic.com
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
Overload thermoswitch
P/N 8329-028 is optional
2-AD-FFN-X
1 watt
2 watts
30-AD-FFA-2
±1.0 dB, maximum
1.20:1, maximum
(primary and secondary line)
100 W average
25 dB (excluding coupled power)
+105°C (221°F)
5.2" L x 1.85" W x 0.812" H
8 oz.
30-AD-FFN-2
30 watts into 1.15:1; 10
watts into 1.50:1; 1 watt into open *
2-500 MHz
2.0 to 2.5 GHz
1.35 dB
0.6 dB
(above 9 dB split) (above 3 dB split)
20 dB min.
30 dB
(J2 to J3)
800 to 2.4 GHz
0.5 dB max
(above 3 dB split)
25 dB min.
(J2 to J3)
VSWR
Housing
Models
1-AD-CCC-8
100-CC-FFA-XX
800 to 3500 MHz
20, 30 dB
18 dB, minimum
1:35:1 max.
1.17:1 max.
1.2:1 max.
Phase balance
of 0.5 degrees.
Amplitude balance
as low as 0.1 dB
1.5 degree phase
dB amplitude
(typically 0.3 dB)
2 degree phase
(typically 0.5) 0.5 dB amplitude
Aluminum
Aluminum
Aluminum
Iridite
Tri-alloy
5.10" L x 4.25" W
x 1.20" H
TNC
2.75" L x 2.75" W
x 1.062" H
Female (N)
Yellow Iridite
4.25" L x 3.14" W
x .5" H
SMA (F)
2.20" L x 2.72" W
x 1.04" H
N-Type (F)
100-AD-FFN-2**
100 watts cw *
350-AD-FFN-2*
350 watts
into matched loads;
150 watts into
mismatched loads *
460 to 970 MHz
806 to 906 MHz
3.25 dB max
0.4 dB
(above 3 dB split)
20 dB min.
20 dB min.
(J2 to J3)
1.2:1 max.
Input: (J1) 1.3:1 max;
(all ports)
Output: (J2, J3)
1.15:1 max.
1 degree phase
(typically 0.2)
2 degree max
(0.1 dB amplitude
(typically 0.05 dB)
Aluminum,
Aluminum
silver plated
Grey acrylic
Tri-alloy
urethane
per fed. Std. 26492
1.115" H x 3.00" W
3.27" L x 2.50" W
x 3.00" D
x 0.80" H
Female (N)
Female (N)
* When mounted to a heat sink capable of maintaining the case temperature at or below 100 degrees C.
** Weatherproof
50-OHM COAXIAL SELECTOR SWITCHES — 72, 73, 74 SERIES
Frequency Range DC to 10 GHz
Maximum 500 volts rms
RF Voltage
Attenuation to 75 dB (cross talk)
Unused Channel
Ambient Temp. -60°C to +65°C (-76°F to +149°F)
Weight Varies by model, approx. 2 1/2 lbs. (1.1 kg)
2.9 gal.
(11 liters)
silicone oil with forced-air cooling
23 15/32" L x 22 1/16" H x 7 1/8",
596 mm x 560 mm x 181 mm)
70 1/2 lbs. (32 kg)
Overload thermoswitch
P/N 8329-028 is optional.
When ordered as a package,
attenuator and blower are factory
assembled at no additional charge.
TYPICAL OPERATING VALUES
FREQUENCY
VSWR
100 MHz
1000 MHz
4000 MHz
Negligible
1.06 max.
1.30 max.
Model
Positions
Coaxial Circuits
7422
2
1
INSERTION LOSS
0.02 dB
0.09 dB
0.22 dB
7441
3
1
7431
4
1
MAX RF POWER
RATING @ 65°C
850 W
200 W
75 W
74
6
1
718
8
1
7181
10
1
72-2
2
2
72-R
reversing
2
www.bird-electronic.com 1-866-695-4569 Bird® Electronic Corporation
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
32
Elements
Elements
TABLE 3 — HIGH-FREQUENCY ELEMENTS, ENTIRE TABLE ±8% FS
Power Range
1W
2.5 W
5W
10 W
25 W
50 W
100 W
250 W
ELEMENT SELECTION GUIDE
Wattmeter Model Select Element from Table(s)
3128A 1, 2, 3, 3A, 4, 6, 14*
3170A 1, 2, 3, 3A, 4, 6, 14*
43 1, 2, 3, 3A, 4, 6, 14*
43P 1, 2, 3, 3A, 4, 5, 6
4305A 4305A Elements (page 13), 1 5/8AA (page 35)
4314B 1, 2, 3, 3A, 4, 5, 6, 14*
4391A 1, 2, 3, 3A, 4, 5, 6, 14*
4410A, 4412 (see page 14)
4431 1, 2, 3, 3A, 4, 6, 14*
4521, 4522 1, 2, 3, 3A, 4, 6, 14*
4526 1, 2, 3, 3A, 4, 6, 14*
4527 1, 2, 6, 14*
ELEMENT TABLE FREQUENCY & POWER LIMITS
ELEMENT
MIN PWR
MAX PWR
TABLE
(WATTS F.S.)
(WATTS F.S.)
APM
1
2
3
3A
4
5
6
8
9
9A
10
11
12
14
1
5
1
1
0.1
1000
500
0.1
50
0.01
0.001
0.1
1
10
1000
1000
5000
2.5
250
0.5
10,000
10,000
0.5
25,000
10
1
100
1000
10,000
1000
950-1260
1J
2.5J
5J
10J
25J
50J
100J
250J
1100-1800
1K
2.5K
5K
10K
25K
50K
—
—
Frequency Bands (MHz)
2200-2300
2300-2400
1M
431-17
2.5M
431-110
5M
432-15
10M
432-125
25M
433-19
50M
433-37
—
—
—
—
1700-2200
1L
2.5L
5L
10L
25L
50L
—
—
2400-2500
431-20
431-107
432-28
432-141
433-20
433-38
—
—
2500-2600
431-23
431-108
432-2
432-102
433-35
433-163
—
—
2600-2700
431-120
431-117
432-12
432-104
433-36
433-164
—
—
TABLE 3A - HIGH FREQUENCY MILLIWATT ELEMENTS
Power Range
100 mW
250 mW
500 mW
950-1260
430-82
—
—
1250-1500
430-209
—
430-259
TABLE 4 — LOW-FREQUENCY ELEMENTS
Frequency Band
Power Range
.45 - 2.5 MHz
MIN FREQ
(MHz)
MAX FREQ
(MHz)
2
2
25
950
950
0.45
2
45
0.45
30
864
25
2
0.2
50
2300
1000
1000
2700
2600
2.5
1260
1000
2300
1000
970
2300
1000
30
1250
1000 W
2500 W
5000 W
10000 W
Frequency Bands (MHz)
1500-1700
1700-2200
430-210
430-178
—
430-1
—
430-95
2300-2400
430-211
430-239
—
2400-2500
430-182
430-240
430-159
2500-2600
—
430-241
—
TABLE 5 — PULSE-POWER ELEMENTS, ENTIRE TABLE ±8% OF FULL SCALE
Frequency Bands (MHz)
Power Range
2-30
25-60
50-125
100-250
400-1000
1000P
2500P
5000P
10000P
500 W
1000 W
2500 W
5000 W
10000 W
—
—
—
—
10000H
—
—
2500A
5000A
—
—
—
2500B
5000B
10000B
—
—
2500C
5000C
—
—
—
2500E
5000E
10000E
950-1260
500J
1000J
2500J
5000J
—
Elements 500 - 1000 Watts, 950 - 1260 MHz, are rated at 100 Watts avg.
Elements 2500 Watts and higher, 25 - 1000 MHz, are rated at 1000 Watts avg.
Elements are capable of reading peak and average power.
TABLE 6 — MILIWATT ELEMENTS
100 mW
Frequency (MHz) 40-50
72-76
Cat. No. 430-266 430-2
250 mW
Frequency (MHz) 72-76
88-108
Cat. No. 430-22 430-217
500 mW
Frequency (MHz) 72-76
88-108
Cat. No. 430-33 430-247
108-136 135-175 320-340 400-420
430-57 430-86 430-205 430-7
420-450 450-470
430-208 430-8
105-120 116-126 130-150 190-210
430-20 430-48 430-13 430-65
450-470 800-1000
430-61 430-264
105-120 120-136 136-150 240-290
430-26 430-248 430-249 430-27
290-340 340-360
430-253 430-157
600-800 800-1000
430-169 430-263
350-400 400-450
430-254 430-255
450-500
430-256
600-800 800-1000
430-258 430-265
TABLE 1 — STANDARD ELEMENTS
Power Range
5W
10 W
25 W
50 W
100 W
250 W
500 W
1000 W
2500 W
5000 W
2-30
—
—
—
50H
100H
250H
500H
1000H
2500H
5000H
25-60
5A
10A
25A
50A
100A
250A
500A
1000A
—
—
Frequency Bands (MHz)
50-125 100-250 200-500
5B
5C
5D
10B
10C
10D
25B
25C
25D
50B
50C
50D
100B
100C
100D
250B
250C
250D
500B
500C
500D
1000B
1000C
1000D
—
—
—
—
—
—
NONDIRECTIONAL SAMPLER ELEMENTS FOR QC-TYPE OR 7/8" EIA LINE
400-1000
5E
10E
25E
50E
100E
250E
500E
1000E
—
—
Frequency Band (MHz)
25-1000
100-1000
Nominal Coupling
-50 dB ± 2 dB (-66 dB @ 2 MHz)
-35 to -48 dB (± 1 dB) Adjustable
TABLE 14 — DIRECTIONAL COUPLER ELEMENTS
FOR QC-TYPE OR 7/8" EIA LINE
Frequency
Nominal
Max. Main
Band (MHz)
Coupling
Line Power
50-100
75-150
125-250
225-450
400-800
750-1250
-40 dB
-40 dB
-40 dB
-40 dB
-40 dB
-40 dB
1 kW
1 kW
1 kW
1 kW
1 kW
1 kW
Model
400-50
400-75
400-125
400-225
400-400
400-750
Max. Main Line Power
500 W
500 W
Model
4274-025
4275-050
TABLE 16 — DIRECTIONAL COUPLER ELEMENTS FOR 3 1/8" EIA LINES
Frequency
Nominal
Max. Main
Band (MHz)
Coupling
Line Power
Model
25-40
-55 dB
25 kW
553-25
50-100
-55 dB
25 kW
553-50
75-150
-55 dB
25 kW
553-75
125-250
-55 dB
25 kW
553-125
225-450
-55 dB
25 kW
553-225
400-800
-55 dB
15 kW
553-401
750-1250
-55 dB
10 kW
553-750
TABLE 2 — LOW-POWER ELEMENTS
33
1 Watt
Frequency (MHz)
Part Number
40-50
040-1
50-60
050-1
60-80
060-1
80-90
080-1
95-125
095-1
110-160
110-1
150-250
150-1
200-300
200-1
275-450
275-1
425-850
425-1
800-1000
801-1
2.5 Watt
Frequency (MHz)
Part Number
25-30
025-2
30-40
030-2
40-50
040-2
50-60
050-2
60-80
060-2
80-95
080-2
95-150
095-2
150-250
150-2
200-300
200-2
250-450
250-2
400-850
400-2
Bird® Electronic Corporation 1-866-695-4569 www.bird-electronic.com
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
800-1000
801-2
TABLE 15 — DIRECTIONAL COUPLER ELEMENTS FOR 1 5/8" EIA LINES
Frequency
Nominal
Max. Main
Band (MHz)
Coupling
Line Power
Model
50-100
-50 dB
10 kW
501-50
75-150
-50 dB
10 kW
501-75
125-250
-50 dB
10 kW
501-125
225-450
-50 dB
10 kW
501-225
400-800
-50 dB
5 kW
501-400
750-1250
-50 dB
5 kW
501-750
TABLE 17— DIRECTIONAL COUPLER ELEMENTS FOR 6 1/8" EIA LINES
Frequency
Nominal
Max. Main
Band (MHz)
Coupling
Line Power
Model
50-100
-60 dB
60 kW
606-50
75-150
-60 dB
60 kW
606-75
125-250
-60 dB
60 kW
606-125
225-450
-60 dB
60 kW
606-225
400-870
-60 dB
60 kW
606-400
www.bird-electronic.com 1-866-695-4569 Bird® Electronic Corporation
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
34
Elements
Elements
TABLE 3 — HIGH-FREQUENCY ELEMENTS, ENTIRE TABLE ±8% FS
Power Range
1W
2.5 W
5W
10 W
25 W
50 W
100 W
250 W
ELEMENT SELECTION GUIDE
Wattmeter Model Select Element from Table(s)
3128A 1, 2, 3, 3A, 4, 6, 14*
3170A 1, 2, 3, 3A, 4, 6, 14*
43 1, 2, 3, 3A, 4, 6, 14*
43P 1, 2, 3, 3A, 4, 5, 6
4305A 4305A Elements (page 13), 1 5/8AA (page 35)
4314B 1, 2, 3, 3A, 4, 5, 6, 14*
4391A 1, 2, 3, 3A, 4, 5, 6, 14*
4410A, 4412 (see page 14)
4431 1, 2, 3, 3A, 4, 6, 14*
4521, 4522 1, 2, 3, 3A, 4, 6, 14*
4526 1, 2, 3, 3A, 4, 6, 14*
4527 1, 2, 6, 14*
ELEMENT TABLE FREQUENCY & POWER LIMITS
ELEMENT
MIN PWR
MAX PWR
TABLE
(WATTS F.S.)
(WATTS F.S.)
APM
1
2
3
3A
4
5
6
8
9
9A
10
11
12
14
1
5
1
1
0.1
1000
500
0.1
50
0.01
0.001
0.1
1
10
1000
1000
5000
2.5
250
0.5
10,000
10,000
0.5
25,000
10
1
100
1000
10,000
1000
950-1260
1J
2.5J
5J
10J
25J
50J
100J
250J
1100-1800
1K
2.5K
5K
10K
25K
50K
—
—
Frequency Bands (MHz)
2200-2300
2300-2400
1M
431-17
2.5M
431-110
5M
432-15
10M
432-125
25M
433-19
50M
433-37
—
—
—
—
1700-2200
1L
2.5L
5L
10L
25L
50L
—
—
2400-2500
431-20
431-107
432-28
432-141
433-20
433-38
—
—
2500-2600
431-23
431-108
432-2
432-102
433-35
433-163
—
—
2600-2700
431-120
431-117
432-12
432-104
433-36
433-164
—
—
TABLE 3A - HIGH FREQUENCY MILLIWATT ELEMENTS
Power Range
100 mW
250 mW
500 mW
950-1260
430-82
—
—
1250-1500
430-209
—
430-259
TABLE 4 — LOW-FREQUENCY ELEMENTS
Frequency Band
Power Range
.45 - 2.5 MHz
MIN FREQ
(MHz)
MAX FREQ
(MHz)
2
2
25
950
950
0.45
2
45
0.45
30
864
25
2
0.2
50
2300
1000
1000
2700
2600
2.5
1260
1000
2300
1000
970
2300
1000
30
1250
1000 W
2500 W
5000 W
10000 W
Frequency Bands (MHz)
1500-1700
1700-2200
430-210
430-178
—
430-1
—
430-95
2300-2400
430-211
430-239
—
2400-2500
430-182
430-240
430-159
2500-2600
—
430-241
—
TABLE 5 — PULSE-POWER ELEMENTS, ENTIRE TABLE ±8% OF FULL SCALE
Frequency Bands (MHz)
Power Range
2-30
25-60
50-125
100-250
400-1000
1000P
2500P
5000P
10000P
500 W
1000 W
2500 W
5000 W
10000 W
—
—
—
—
10000H
—
—
2500A
5000A
—
—
—
2500B
5000B
10000B
—
—
2500C
5000C
—
—
—
2500E
5000E
10000E
950-1260
500J
1000J
2500J
5000J
—
Elements 500 - 1000 Watts, 950 - 1260 MHz, are rated at 100 Watts avg.
Elements 2500 Watts and higher, 25 - 1000 MHz, are rated at 1000 Watts avg.
Elements are capable of reading peak and average power.
TABLE 6 — MILIWATT ELEMENTS
100 mW
Frequency (MHz) 40-50
72-76
Cat. No. 430-266 430-2
250 mW
Frequency (MHz) 72-76
88-108
Cat. No. 430-22 430-217
500 mW
Frequency (MHz) 72-76
88-108
Cat. No. 430-33 430-247
108-136 135-175 320-340 400-420
430-57 430-86 430-205 430-7
420-450 450-470
430-208 430-8
105-120 116-126 130-150 190-210
430-20 430-48 430-13 430-65
450-470 800-1000
430-61 430-264
105-120 120-136 136-150 240-290
430-26 430-248 430-249 430-27
290-340 340-360
430-253 430-157
600-800 800-1000
430-169 430-263
350-400 400-450
430-254 430-255
450-500
430-256
600-800 800-1000
430-258 430-265
TABLE 1 — STANDARD ELEMENTS
Power Range
5W
10 W
25 W
50 W
100 W
250 W
500 W
1000 W
2500 W
5000 W
2-30
—
—
—
50H
100H
250H
500H
1000H
2500H
5000H
25-60
5A
10A
25A
50A
100A
250A
500A
1000A
—
—
Frequency Bands (MHz)
50-125 100-250 200-500
5B
5C
5D
10B
10C
10D
25B
25C
25D
50B
50C
50D
100B
100C
100D
250B
250C
250D
500B
500C
500D
1000B
1000C
1000D
—
—
—
—
—
—
NONDIRECTIONAL SAMPLER ELEMENTS FOR QC-TYPE OR 7/8" EIA LINE
400-1000
5E
10E
25E
50E
100E
250E
500E
1000E
—
—
Frequency Band (MHz)
25-1000
100-1000
Nominal Coupling
-50 dB ± 2 dB (-66 dB @ 2 MHz)
-35 to -48 dB (± 1 dB) Adjustable
TABLE 14 — DIRECTIONAL COUPLER ELEMENTS
FOR QC-TYPE OR 7/8" EIA LINE
Frequency
Nominal
Max. Main
Band (MHz)
Coupling
Line Power
50-100
75-150
125-250
225-450
400-800
750-1250
-40 dB
-40 dB
-40 dB
-40 dB
-40 dB
-40 dB
1 kW
1 kW
1 kW
1 kW
1 kW
1 kW
Model
400-50
400-75
400-125
400-225
400-400
400-750
Max. Main Line Power
500 W
500 W
Model
4274-025
4275-050
TABLE 16 — DIRECTIONAL COUPLER ELEMENTS FOR 3 1/8" EIA LINES
Frequency
Nominal
Max. Main
Band (MHz)
Coupling
Line Power
Model
25-40
-55 dB
25 kW
553-25
50-100
-55 dB
25 kW
553-50
75-150
-55 dB
25 kW
553-75
125-250
-55 dB
25 kW
553-125
225-450
-55 dB
25 kW
553-225
400-800
-55 dB
15 kW
553-401
750-1250
-55 dB
10 kW
553-750
TABLE 2 — LOW-POWER ELEMENTS
33
1 Watt
Frequency (MHz)
Part Number
40-50
040-1
50-60
050-1
60-80
060-1
80-90
080-1
95-125
095-1
110-160
110-1
150-250
150-1
200-300
200-1
275-450
275-1
425-850
425-1
800-1000
801-1
2.5 Watt
Frequency (MHz)
Part Number
25-30
025-2
30-40
030-2
40-50
040-2
50-60
050-2
60-80
060-2
80-95
080-2
95-150
095-2
150-250
150-2
200-300
200-2
250-450
250-2
400-850
400-2
Bird® Electronic Corporation 1-866-695-4569 www.bird-electronic.com
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
800-1000
801-2
TABLE 15 — DIRECTIONAL COUPLER ELEMENTS FOR 1 5/8" EIA LINES
Frequency
Nominal
Max. Main
Band (MHz)
Coupling
Line Power
Model
50-100
-50 dB
10 kW
501-50
75-150
-50 dB
10 kW
501-75
125-250
-50 dB
10 kW
501-125
225-450
-50 dB
10 kW
501-225
400-800
-50 dB
5 kW
501-400
750-1250
-50 dB
5 kW
501-750
TABLE 17— DIRECTIONAL COUPLER ELEMENTS FOR 6 1/8" EIA LINES
Frequency
Nominal
Max. Main
Band (MHz)
Coupling
Line Power
Model
50-100
-60 dB
60 kW
606-50
75-150
-60 dB
60 kW
606-75
125-250
-60 dB
60 kW
606-125
225-450
-60 dB
60 kW
606-225
400-870
-60 dB
60 kW
606-400
www.bird-electronic.com 1-866-695-4569 Bird® Electronic Corporation
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
34
Broadcast Elements
Broadcast Elements
ELEMENT SELECTION GUIDE
Wattmeter Model Select Element from Table(s)
3126A 1 5/8 B, 3 1/8 B, 4 1/16 B, 6 1/8 B
3127A 1 5/8 A, 3 1/8 A, 6 1/8 A
3127-035 1 5/8 A, 3 1/8 A, 4 1/16 A, 6 1/8 A
3127-040 1 5/8 A, 3 1/8 A, 4 1/16 A, 6 1/8 A
3127-055 1 5/8 A, 3 1/8 A, 4 1/16 A, 6 1/8 A
3127-070 1 5/8 B, 3 1/8 B, 4 1/16 B, 6 1/8 B
3127-075 1 5/8 B, 3 1/8 B, 4 1/16 B, 6 1/8 B
3127-080 1 5/8 B, 3 1/8 B, 4 1/16 B, 6 1/8 B
3171A 1 5/8 AA, 3 1/8 AA, 4 1/16 AA, 6 1/8 AA
3171-020 1 5/8 BB, 3 1/8 BB, 4 1/16 BB, 6 1/8 BB
TABLE 1 5/8AA — STANDARD ELEMENTS 30 µA
Frequency Bands (MHz)
Power Range 2-30
50-125
100-250
100 W
—
100B12
100C12
250 W
—
250B12
250C12
500 W
500H12
500B12
500C12
1000 W 1000H12
1000B12
1000C12
2500 W 2500H12
2500B12
2500C12
5000 W 5000H12
5000B12
5000C12
10 kW
10KH12
10KB12
10KC12
25 kW
25KH12
25B12
—
TABLE 1 5/8BB — STANDARD ELEMENTS 30 µA
Frequency Bands (MHz)
Power Range 2-30
50-125
100-250
300H12
300B12
300C12
300 W
600 W
600H12
600B12
600C12
1500 W
1500H12
1500B12
1500C12
3000 W
3000H12
3000B12
3000C12
6000 W
6000H12
6000B12
6000C12
15 kW
15KH12
15KB12
—
TABLE 3 1/8A — STANDARD ELEMENTS 100 µA
Frequency Bands (MHz)
Power Range 2-30
50-125
100-250
100 W
250 W
500 W
1000 W
2500 W
5000 W
10 kW
25 kW
50 kW
100 kW
—
—
—
—
2500H3
5000H3
10KH3
25KH3
50KH3
100KH3
100B3
250B3
500B3
1000B3
2500B3
5000B3
10KB3
25KB3
50KB3
—
100C3
250C3
500C3
1000C3
2500C3
5000C3
10KC3
25KC3
50KC3
—
TABLE 1 5/8A — STANDARD ELEMENTS 100 µA
Frequency Bands (MHz)
Power Range
2-30
50-125
100-250
100 W
—
100B1
100C1
250 W
—
250B1
250C1
500 W
—
500B1
500C1
1000 W
1000H1
1000B1
1000C1
2500 W
2500H1
2500B1
2500C1
5000 W
5000H1
5000B1
5000C1
10 kW
10KH1
10KB1
10KC1
25 kW
25KH1
25B1
—
400-1000
100E12
250E12
500E12
1000E12
2500E12
5000E12
—
—
400-1000
300E12
600E12
1500E12
3000E12
6000E12
—
400-1000
100E3
250E3
500E3
1000E3
2500E3
5000E3
10KE3
25KE3
—
—
TABLE 3 1/8B — STANDARD ELEMENTS 100 µA
Power Range
600 W
1500 W
3000 W
6000 W
15 kW
30 kW
Frequency Bands (MHz)
50-125
100-250
400-1000
600B3
600C3
600E3
1500B3
1500C3
1500E3
3000B3
3000C3
3000E3
6000B3
6000C3
6000E3
15KB3
15KC3
15KE3
30KB3
30KC3
30KE3
TABLE 1 5/8B — STANDARD ELEMENTS 100 µA
Frequency Bands (MHz)
Power Range
2-30
50-125
100-250
300 W
—
300B1
300C1
600 W
—
600B1
600C1
1500 W
1500H1
1500B1
1500C1
3000 W
3000H1
3000B1
3000C1
6000 W
6000H1
6000B1
6000C1
15 kW
15KH1
15KB1
—
400-1000
100E1
250E1
500E1
1000E1
2500E1
5000E1
—
—
400-1000
300E1
600E1
1500E1
3000E1
6000E1
—
TABLE 1 5/8C — STANDARD ELEMENTS 100 µA
Frequency Bands (MHz)
Power Range 50-125
100-250
8000 W
8000B1
TABLE 4 1/16A — STANDARD ELEMENTS 100 µA
Frequency Bands (MHz)
Power Range 50-125
100-250
400-1000
2500 W
2500B5
2500C5
2500E5
5000 W
5000B5
5000C5
5000E5
10 kW
10KB5
10KC5
10KE5
25 kW
25KB5
25KC5
25KE5
50 kW
50KB5
50KC5
—
TABLE 4 1/16AA — STANDARD ELEMENTS 30 µA
Frequency Bands (MHz)
Power Range 50-125
100-250
400-1000
2500 W 2500B52
2500C52
2500E52
5000 W 5000B52
5000C52
5000E52
10 kW
10KB52
10KC52
10KE52
25 kW
25KB52
25KC52
25KE52
TABLE 4 1/16B — STANDARD ELEMENTS 100 µA
Frequency Bands (MHz)
Power Range 50-125
100-250
400-1000
1500 W
1500B5
1500C5
1500E5
3000 W
3000B5
3000C5
3000E5
6000 W
6000B5
6000C5
6000E5
15 kW
15KB5
15KC5
15KE5
30 kW
30KB5
30KC5
30KE5
60 kW
60KB5
60KC5
—
TABLE 4 1/16BB — STANDARD ELEMENTS 30 µA
Frequency Bands (MHz)
Power Range 50-125
100-250
400-1000
1500 W 1500B52
1500C52
1500E52
3000 W 3000B52
3000C52
3000E52
6000 W 6000B52
6000C52
6000E52
15 kW
15KB52
15KC52
15KE52
30 kW
30KB52
30KC52
30KE52
60 kW
60KB52
60KC52
—
TABLE 4 1/16C — STANDARD ELEMENTS 100 µA
Frequency Bands (MHz)
Power Range 50-125
100-250
400-1000
8000 W
80 kW
8000B5
80KB5
8000C5
80KC5
8000E5
—
8000C1
TABLE 6 1/8A — STANDARD ELEMENTS 100 µA
Frequency Bands (MHz)
Power Range 2-30
50-125
100-250
TABLE 3 1/8AA — STANDARD ELEMENTS 30 µA
Frequency Bands (MHz)
Power Range 2-30
50-125
100-250
100 W
—
100B32
100C32
250 W
—
250B32
250C32
500 W
500H32
500B32
500C32
1000 W
1000H32
1000B32
1000C32
2500 W
2500H32
2500B32
2500C32
5000 W
5000H32
5000B32
5000C32
10 kW
10KH32
10KB32
10KC32
25 kW
25KH32
25KB32
25KC32
50 kW
50KH32
50KB32
50KC32
100 kW
100KH32
—
—
TABLE 3 1/8BB — STANDARD ELEMENTS 30 µA
Frequency Bands (MHz)
Power Range 50-125
100-250
400-1000
600 W
600B32
600C32
600E32
1500 W
1500B32
1500C32
1500E32
3000 W
3000B32
3000C32
3000E32
6000 W
6000B32
6000C32
6000E32
15 kW
15KB32
15KC32
15KE32
30 kW
30KB32
30KC32
30KE32
400-1000
100E32
250E32
500E32
1000E32
2500E32
5000E32
10KE32
25KE32
—
—
1000W
2500 W
5000 W
10 kW
25 kW
50 kW
100 kW
250 kW
—
—
—
10KH6
25KH6
50KH6
100KH6
250KH6
1000B6
2500B6
—
10KB6
25KB6
50KB6
100KB6
—
1000C6
2500C6
5000C6
10KC6
25KC6
50KC6
100KC6
—
TABLE 6 1/8B — STANDARD ELEMENTS 100 µA
Frequency Bands (MHz)
Power Range 50-125
100-250
400-1000
3000B6
3000C6
3000E6
3000 W
6000 W
6000B6
6000C6
6000E6
15 kW
15KB6
15KC6
15KE6
30 kW
30KB6
30KC6
30KE6
60 kW
60KB6
60KC6
60KE6
TABLE 6 1/8AA — STANDARD ELEMENTS 30 µA
400-1000
Power Range
2-30
1000E6
2500E6
5000E6
10KE6
25KE6
50KE6
—
—
250 W
500 W
1000 W
2500 W
5000 W
10 kW
25 kW
50 kW
100 kW
—
—
1000H62
2500H62
—
10KH62
—
50KH62
100KH62
Frequency Bands (MHz)
50-125
100-250
400-1000
—
500B62
1000B62
2500B62
5000B62
10KB62
25KB62
50KB62
100KB62
250E62
500E62
1000E62
2500E62
5000E62
10KE62
25KE62
50KE62
—
250C62
500C62
1000C62
2500C62
5000C62
10KC62
25KC62
50KC62
100KC62
TABLE 6 1/8BB — STANDARD ELEMENTS 30 µA
Power Range
3000 W
6000 W
15 kW
30 kW
60 kW
Frequency Bands (MHz)
50-125
100-250
400-1000
3000B62
3000C62
3000E62
6000B62
6000C62
6000E62
15KB62
15KC62
15KE62
30KB62
30KC62
30KE62
60KB62
60KC62
60KE62
TABLE 6 1/8C — STANDARD ELEMENTS 100 µA
Frequency Bands (MHz)
Power Range 50-125
100-250
400-1000
8000 W
8000B6
8000C6
8000E6
80 kW
80KB6
80KC6
80KE6
TABLE 3 1/8C — STANDARD ELEMENTS 100 µA
Frequency Bands (MHz)
Power Range 100-250
8000 W
8000C3
35
Bird® Electronic Corporation 1-866-695-4569 www.bird-electronic.com
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
www.bird-electronic.com 1-866-695-4569 Bird® Electronic Corporation
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
36
Broadcast Elements
Broadcast Elements
ELEMENT SELECTION GUIDE
Wattmeter Model Select Element from Table(s)
3126A 1 5/8 B, 3 1/8 B, 4 1/16 B, 6 1/8 B
3127A 1 5/8 A, 3 1/8 A, 6 1/8 A
3127-035 1 5/8 A, 3 1/8 A, 4 1/16 A, 6 1/8 A
3127-040 1 5/8 A, 3 1/8 A, 4 1/16 A, 6 1/8 A
3127-055 1 5/8 A, 3 1/8 A, 4 1/16 A, 6 1/8 A
3127-070 1 5/8 B, 3 1/8 B, 4 1/16 B, 6 1/8 B
3127-075 1 5/8 B, 3 1/8 B, 4 1/16 B, 6 1/8 B
3127-080 1 5/8 B, 3 1/8 B, 4 1/16 B, 6 1/8 B
3171A 1 5/8 AA, 3 1/8 AA, 4 1/16 AA, 6 1/8 AA
3171-020 1 5/8 BB, 3 1/8 BB, 4 1/16 BB, 6 1/8 BB
TABLE 1 5/8AA — STANDARD ELEMENTS 30 µA
Frequency Bands (MHz)
Power Range 2-30
50-125
100-250
100 W
—
100B12
100C12
250 W
—
250B12
250C12
500 W
500H12
500B12
500C12
1000 W 1000H12
1000B12
1000C12
2500 W 2500H12
2500B12
2500C12
5000 W 5000H12
5000B12
5000C12
10 kW
10KH12
10KB12
10KC12
25 kW
25KH12
25B12
—
TABLE 1 5/8BB — STANDARD ELEMENTS 30 µA
Frequency Bands (MHz)
Power Range 2-30
50-125
100-250
300H12
300B12
300C12
300 W
600 W
600H12
600B12
600C12
1500 W
1500H12
1500B12
1500C12
3000 W
3000H12
3000B12
3000C12
6000 W
6000H12
6000B12
6000C12
15 kW
15KH12
15KB12
—
TABLE 3 1/8A — STANDARD ELEMENTS 100 µA
Frequency Bands (MHz)
Power Range 2-30
50-125
100-250
100 W
250 W
500 W
1000 W
2500 W
5000 W
10 kW
25 kW
50 kW
100 kW
—
—
—
—
2500H3
5000H3
10KH3
25KH3
50KH3
100KH3
100B3
250B3
500B3
1000B3
2500B3
5000B3
10KB3
25KB3
50KB3
—
100C3
250C3
500C3
1000C3
2500C3
5000C3
10KC3
25KC3
50KC3
—
TABLE 1 5/8A — STANDARD ELEMENTS 100 µA
Frequency Bands (MHz)
Power Range
2-30
50-125
100-250
100 W
—
100B1
100C1
250 W
—
250B1
250C1
500 W
—
500B1
500C1
1000 W
1000H1
1000B1
1000C1
2500 W
2500H1
2500B1
2500C1
5000 W
5000H1
5000B1
5000C1
10 kW
10KH1
10KB1
10KC1
25 kW
25KH1
25B1
—
400-1000
100E12
250E12
500E12
1000E12
2500E12
5000E12
—
—
400-1000
300E12
600E12
1500E12
3000E12
6000E12
—
400-1000
100E3
250E3
500E3
1000E3
2500E3
5000E3
10KE3
25KE3
—
—
TABLE 3 1/8B — STANDARD ELEMENTS 100 µA
Power Range
600 W
1500 W
3000 W
6000 W
15 kW
30 kW
Frequency Bands (MHz)
50-125
100-250
400-1000
600B3
600C3
600E3
1500B3
1500C3
1500E3
3000B3
3000C3
3000E3
6000B3
6000C3
6000E3
15KB3
15KC3
15KE3
30KB3
30KC3
30KE3
TABLE 1 5/8B — STANDARD ELEMENTS 100 µA
Frequency Bands (MHz)
Power Range
2-30
50-125
100-250
300 W
—
300B1
300C1
600 W
—
600B1
600C1
1500 W
1500H1
1500B1
1500C1
3000 W
3000H1
3000B1
3000C1
6000 W
6000H1
6000B1
6000C1
15 kW
15KH1
15KB1
—
400-1000
100E1
250E1
500E1
1000E1
2500E1
5000E1
—
—
400-1000
300E1
600E1
1500E1
3000E1
6000E1
—
TABLE 1 5/8C — STANDARD ELEMENTS 100 µA
Frequency Bands (MHz)
Power Range 50-125
100-250
8000 W
8000B1
TABLE 4 1/16A — STANDARD ELEMENTS 100 µA
Frequency Bands (MHz)
Power Range 50-125
100-250
400-1000
2500 W
2500B5
2500C5
2500E5
5000 W
5000B5
5000C5
5000E5
10 kW
10KB5
10KC5
10KE5
25 kW
25KB5
25KC5
25KE5
50 kW
50KB5
50KC5
—
TABLE 4 1/16AA — STANDARD ELEMENTS 30 µA
Frequency Bands (MHz)
Power Range 50-125
100-250
400-1000
2500 W 2500B52
2500C52
2500E52
5000 W 5000B52
5000C52
5000E52
10 kW
10KB52
10KC52
10KE52
25 kW
25KB52
25KC52
25KE52
TABLE 4 1/16B — STANDARD ELEMENTS 100 µA
Frequency Bands (MHz)
Power Range 50-125
100-250
400-1000
1500 W
1500B5
1500C5
1500E5
3000 W
3000B5
3000C5
3000E5
6000 W
6000B5
6000C5
6000E5
15 kW
15KB5
15KC5
15KE5
30 kW
30KB5
30KC5
30KE5
60 kW
60KB5
60KC5
—
TABLE 4 1/16BB — STANDARD ELEMENTS 30 µA
Frequency Bands (MHz)
Power Range 50-125
100-250
400-1000
1500 W 1500B52
1500C52
1500E52
3000 W 3000B52
3000C52
3000E52
6000 W 6000B52
6000C52
6000E52
15 kW
15KB52
15KC52
15KE52
30 kW
30KB52
30KC52
30KE52
60 kW
60KB52
60KC52
—
TABLE 4 1/16C — STANDARD ELEMENTS 100 µA
Frequency Bands (MHz)
Power Range 50-125
100-250
400-1000
8000 W
80 kW
8000B5
80KB5
8000C5
80KC5
8000E5
—
8000C1
TABLE 6 1/8A — STANDARD ELEMENTS 100 µA
Frequency Bands (MHz)
Power Range 2-30
50-125
100-250
TABLE 3 1/8AA — STANDARD ELEMENTS 30 µA
Frequency Bands (MHz)
Power Range 2-30
50-125
100-250
100 W
—
100B32
100C32
250 W
—
250B32
250C32
500 W
500H32
500B32
500C32
1000 W
1000H32
1000B32
1000C32
2500 W
2500H32
2500B32
2500C32
5000 W
5000H32
5000B32
5000C32
10 kW
10KH32
10KB32
10KC32
25 kW
25KH32
25KB32
25KC32
50 kW
50KH32
50KB32
50KC32
100 kW
100KH32
—
—
TABLE 3 1/8BB — STANDARD ELEMENTS 30 µA
Frequency Bands (MHz)
Power Range 50-125
100-250
400-1000
600 W
600B32
600C32
600E32
1500 W
1500B32
1500C32
1500E32
3000 W
3000B32
3000C32
3000E32
6000 W
6000B32
6000C32
6000E32
15 kW
15KB32
15KC32
15KE32
30 kW
30KB32
30KC32
30KE32
400-1000
100E32
250E32
500E32
1000E32
2500E32
5000E32
10KE32
25KE32
—
—
1000W
2500 W
5000 W
10 kW
25 kW
50 kW
100 kW
250 kW
—
—
—
10KH6
25KH6
50KH6
100KH6
250KH6
1000B6
2500B6
—
10KB6
25KB6
50KB6
100KB6
—
1000C6
2500C6
5000C6
10KC6
25KC6
50KC6
100KC6
—
TABLE 6 1/8B — STANDARD ELEMENTS 100 µA
Frequency Bands (MHz)
Power Range 50-125
100-250
400-1000
3000B6
3000C6
3000E6
3000 W
6000 W
6000B6
6000C6
6000E6
15 kW
15KB6
15KC6
15KE6
30 kW
30KB6
30KC6
30KE6
60 kW
60KB6
60KC6
60KE6
TABLE 6 1/8AA — STANDARD ELEMENTS 30 µA
400-1000
Power Range
2-30
1000E6
2500E6
5000E6
10KE6
25KE6
50KE6
—
—
250 W
500 W
1000 W
2500 W
5000 W
10 kW
25 kW
50 kW
100 kW
—
—
1000H62
2500H62
—
10KH62
—
50KH62
100KH62
Frequency Bands (MHz)
50-125
100-250
400-1000
—
500B62
1000B62
2500B62
5000B62
10KB62
25KB62
50KB62
100KB62
250E62
500E62
1000E62
2500E62
5000E62
10KE62
25KE62
50KE62
—
250C62
500C62
1000C62
2500C62
5000C62
10KC62
25KC62
50KC62
100KC62
TABLE 6 1/8BB — STANDARD ELEMENTS 30 µA
Power Range
3000 W
6000 W
15 kW
30 kW
60 kW
Frequency Bands (MHz)
50-125
100-250
400-1000
3000B62
3000C62
3000E62
6000B62
6000C62
6000E62
15KB62
15KC62
15KE62
30KB62
30KC62
30KE62
60KB62
60KC62
60KE62
TABLE 6 1/8C — STANDARD ELEMENTS 100 µA
Frequency Bands (MHz)
Power Range 50-125
100-250
400-1000
8000 W
8000B6
8000C6
8000E6
80 kW
80KB6
80KC6
80KE6
TABLE 3 1/8C — STANDARD ELEMENTS 100 µA
Frequency Bands (MHz)
Power Range 100-250
8000 W
8000C3
35
Bird® Electronic Corporation 1-866-695-4569 www.bird-electronic.com
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
www.bird-electronic.com 1-866-695-4569 Bird® Electronic Corporation
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
36
Accessories
Accessories
QC-Type (Quick-Change), SQC (Small Quick-Change) Connectors
Many TERMALINE® load resistors, attenuators and absorption wattmeters, as well as THRULINE® wattmeters, employ our patented QC-type
”Quick-Change“ RF Connectors. These products may be ordered with the connector(s) most convenient for use with your equipment. Many
customers order additional connectors to avoid using performance robbing adapters. QC Connectors are easily changed in the field by removing
and replacing four screws. Because of the wide variety of connectors and possible applications, electrical specifications for QC-equipped
products are quoted with the standard connectors normally supplied with the equipment.
SQC Connectors, (used with the 4110 Series, 4304 Wattmeter, 8072-1, 8431 Load Resistors, etc.) are shown below.
Description
Female N
Male N
Female UHF
Female TNC
Female BNC
Part Number
4100-014
4100-015
4100-017
4100-055
4110-014
TNC(M)
Model 4240-401
QC Connectors
BNC (F)
4240-125
LT (M)
4240-012
BNC (M)
4240-132
Mini-UHF (F)
4240-346
C (F)
4240-100
N (F)
4240-062
C (M)
4240-110
TNC (F)
4240-156
TNC (M)
4240-160
UHF (F)
4240-050
UHF (M)
4240-179
N (M)
4240-063
7⁄8" EIA
4240-002
HN (F)
4240-268
INTERSERIES ADAPTER KITS
Model 4240-400
N(F)
N(F)
•
N(M)
•
UHF(F)
•
UHF(M)
•
BNC(F)
•
BNC(M)
•
TNC(F)
•
Open Term.
#10-32 Nut
4240-080
1 5⁄8" EIA
Fixed
4240-096
HN (M)
4240-278
N(F)
N(M)
BNC(F)
BNC(M)
TNC(F)
TNC(M)
SMA(F)
SMA(M)
UHF(F)
UHF(M)
N(M)
UHF(F)
UHF(M)
BNC(F)
BNC(M)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
N(F)
N(M)
BNC(F)
BNC(M)
TNC(F)
TNC(M)
SMA(F)
SMA(M)
UHF(F)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
DC CABLE ASSEMBLIES
Model
Connector
Length
Use With Group*
3170-058-1
BNC (M)
14"
I
3170-058-3
BNC (M)
25'
I
3170-058-5
BNC (M)
50'
I
3170-058-9
BNC (M)
100'
I
4220-097-1
Spade Lug
33"
II
4220-097-7
Spade Lug
10'
II
4220-097-10
Spade Lug
25'
II
4220-097-17
Spade Lug
50'
II
4220-097-13
Spade Lug
75'
II
4220-097-16
Spade Lug
100'
II
7500-072-1
DC Plug
39 1/2'
III
7500-072-4
DC Plug
10'
III
7500-072-2
DC Plug
25'
III
*WATTMETER GROUPS
Group I
3171-020, 3171, 3171A020, 3171A, 3127-055, 3127-080
Group II
3127-035, 3127-075, 3127-040, 3127-070
Group III
6810-020, 4305A, 6810-030, 4909, 4715, 4610, 4723, 4802
SC (F)
4240-090
15⁄8" EIA
Swivel
4240-208
LC (F)
4240-031
SMA (F)
4240-336
LC (M)
4240-025
LT (F)
4240-018
37
Bird® Electronic Corporation 1-866-695-4569 www.bird-electronic.com
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
SMA (M)
4240-334
IEC 7/16 (F)
Type 169-4
4240-344
WATTMETER BATTERIES
Model
Use With
5-1230
4391A
5-1587
4412
5-1475
4030
5-1375
4314B, 4410A,
4041, 4410, APM-16
Volts
1.25
9
3
9
Type
NiCd
NiCd
Li-Mn
Alkaline
TNC(F)
QC ADAPTERS, CONNECTORS
Model
Description
QC (F) to QC (F)
4240-165
4240-180
Copl. (M) to QC (F)
4240-187
3 1/8" Unflg. 51.5 ohms to QC (F)
4240-194
3 1/8" Flg. To QC (F)
4240-201
7/8" FLG. To QC (F)
4240-244
Rt. Angle QC
4240-260
1 5/8" Flg. To QC (F)
7500-076
DC conn. plug
Notes
6 Required
—
3 Required
—
IEC 7/16 (M)
Type 169-4
4240-363
www.bird-electronic.com 1-866-695-4569 Bird® Electronic Corporation
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
38
Accessories
Accessories
QC-Type (Quick-Change), SQC (Small Quick-Change) Connectors
Many TERMALINE® load resistors, attenuators and absorption wattmeters, as well as THRULINE® wattmeters, employ our patented QC-type
”Quick-Change“ RF Connectors. These products may be ordered with the connector(s) most convenient for use with your equipment. Many
customers order additional connectors to avoid using performance robbing adapters. QC Connectors are easily changed in the field by removing
and replacing four screws. Because of the wide variety of connectors and possible applications, electrical specifications for QC-equipped
products are quoted with the standard connectors normally supplied with the equipment.
SQC Connectors, (used with the 4110 Series, 4304 Wattmeter, 8072-1, 8431 Load Resistors, etc.) are shown below.
Description
Female N
Male N
Female UHF
Female TNC
Female BNC
Part Number
4100-014
4100-015
4100-017
4100-055
4110-014
TNC(M)
Model 4240-401
QC Connectors
BNC (F)
4240-125
LT (M)
4240-012
BNC (M)
4240-132
Mini-UHF (F)
4240-346
C (F)
4240-100
N (F)
4240-062
C (M)
4240-110
TNC (F)
4240-156
TNC (M)
4240-160
UHF (F)
4240-050
UHF (M)
4240-179
N (M)
4240-063
7⁄8" EIA
4240-002
HN (F)
4240-268
INTERSERIES ADAPTER KITS
Model 4240-400
N(F)
N(F)
•
N(M)
•
UHF(F)
•
UHF(M)
•
BNC(F)
•
BNC(M)
•
TNC(F)
•
Open Term.
#10-32 Nut
4240-080
1 5⁄8" EIA
Fixed
4240-096
HN (M)
4240-278
N(F)
N(M)
BNC(F)
BNC(M)
TNC(F)
TNC(M)
SMA(F)
SMA(M)
UHF(F)
UHF(M)
N(M)
UHF(F)
UHF(M)
BNC(F)
BNC(M)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
N(F)
N(M)
BNC(F)
BNC(M)
TNC(F)
TNC(M)
SMA(F)
SMA(M)
UHF(F)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
DC CABLE ASSEMBLIES
Model
Connector
Length
Use With Group*
3170-058-1
BNC (M)
14"
I
3170-058-3
BNC (M)
25'
I
3170-058-5
BNC (M)
50'
I
3170-058-9
BNC (M)
100'
I
4220-097-1
Spade Lug
33"
II
4220-097-7
Spade Lug
10'
II
4220-097-10
Spade Lug
25'
II
4220-097-17
Spade Lug
50'
II
4220-097-13
Spade Lug
75'
II
4220-097-16
Spade Lug
100'
II
7500-072-1
DC Plug
39 1/2'
III
7500-072-4
DC Plug
10'
III
7500-072-2
DC Plug
25'
III
*WATTMETER GROUPS
Group I
3171-020, 3171, 3171A020, 3171A, 3127-055, 3127-080
Group II
3127-035, 3127-075, 3127-040, 3127-070
Group III
6810-020, 4305A, 6810-030, 4909, 4715, 4610, 4723, 4802
SC (F)
4240-090
15⁄8" EIA
Swivel
4240-208
LC (F)
4240-031
SMA (F)
4240-336
LC (M)
4240-025
LT (F)
4240-018
37
Bird® Electronic Corporation 1-866-695-4569 www.bird-electronic.com
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
SMA (M)
4240-334
IEC 7/16 (F)
Type 169-4
4240-344
WATTMETER BATTERIES
Model
Use With
5-1230
4391A
5-1587
4412
5-1475
4030
5-1375
4314B, 4410A,
4041, 4410, APM-16
Volts
1.25
9
3
9
Type
NiCd
NiCd
Li-Mn
Alkaline
TNC(F)
QC ADAPTERS, CONNECTORS
Model
Description
QC (F) to QC (F)
4240-165
4240-180
Copl. (M) to QC (F)
4240-187
3 1/8" Unflg. 51.5 ohms to QC (F)
4240-194
3 1/8" Flg. To QC (F)
4240-201
7/8" FLG. To QC (F)
4240-244
Rt. Angle QC
4240-260
1 5/8" Flg. To QC (F)
7500-076
DC conn. plug
Notes
6 Required
—
3 Required
—
IEC 7/16 (M)
Type 169-4
4240-363
www.bird-electronic.com 1-866-695-4569 Bird® Electronic Corporation
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
38
Accessories
Technical Data
CASES
Model
CC-6
CC-1
EC-1
4300-061
4300-70
4300-085
4300-055
4300A215
7000A850
7002A870
Interpreting readings on peak Wattmeters
with Multicarrier, CW, AM, SSB,
and pulsed signals
Figure 1
Case Holders
Portable THRULINE® Wattmeter* and 4 elements
Portable THRULINE® Wattmeter* and 6 elements
12 elements
Model 43 or 43P Wattmeter, load, signal sampler, QC connectors, and 4 elements
Portable THRULINE Wattmeter*, test cable, screw driver, QC connectors, and 15 elements
4391 POWER ANALYST, signal sampler, and other accessories
4410 Wattmeter, load, elements, and other accessories
4412 Wattmeter and power sensors
AT-100, AT-400, AT-800 Antenna Testers
Site Analyzer
In the table below, Z° = 50 ohms, PEP is peak envelope power,
and PEV is peak envelope voltage. The PEV of the carrier
(or suppressed carrier) C was arbitrarily chosen at 100 volts
in all examples, PEVRMS = PEV .
1.414
The graph at right shows correlation of peak-envelope-power (PEP),
average heating power (PAVE ) and % modulation of AM signals
for Tables B, C, and D below.
*Includes THRULINE® Wattmeter Models: APM-16, 43, 43P, 4304A, 4308, 4314B, 4410A, 4430 and 4431.
MISCELLANEOUS
Model
3610-031
5-1864
5-1940
5A2229
5A2226
Use With
All Element Sockets
4314B
4314B
AT Series
AT Series
Description
Dummy Plug
Power Supply 115 V
Power Supply 230 V
Power Supply 120 V
Power Supply 230 V
COOLANTS
Model
5-030-3
5-1070-2
5-1134-3
Description
Volume/Pkg.
Refined Mineral Oil
DC-200 Silicone
Ethylene Glycol, Industrial Grade
1 Gallon Can
1 Gallon Can
1 Gallon Can
Model
4600-025
4712-015
4902-025
7500-076
Description
For 10 and 25 kW MODULOAD
For 50 kW MODULOAD
For ECONOLOAD, 115 Vac
For ECONOLOAD, 230 Vac
**** Add -677-1 or -677-2 to any ECONOLOAD Model No. (10 kW to 80 kW) to get it mounted
on a dolly with a control box, water flow switch and bracket (for an optional wattmeter).
8776-677-1 shown. -1 = 115 Vac 50/60 Hz, -2 = 230 Vac 50/60 Hz.
REPLACEMENT RESISTORS
Model
For
8731-031-1
8731 ECONOLOADS
8738A072
8730A/8738A ECONOLOADS
8755-027-2
8745/8746 ECONOLOADS
8755-027-3
8755/8756 ECONOLOADS
8755-027-4
8765/8766 ECONOLOADS
8755-027-5
8775/8776 ECONOLOADS
8792-010-2 one reqd.
8796 ECONOLOADS
8792-010-1 one reqd.
8792 ECONOLOADS
5A2388
8578A100 Forced-Air Load
5A2393
8578A150 Forced-Air Load
8572-021
8572 Forced-Air Load
COUPLING KITS
Model
4240-220
4712-020
4600-020
5-289
5-726
4902-020
5-1322
Power
10 kW
10 kW
20 kW
30 kW
40 kW
50 kW
60 kW
80 kW
10 kW
15 kW
25 kW
Line Type
OHMS
7/8" Flg.
1 5/8" Flg.
3 1/8" Flg.
3 1/8" Unflg.
3 1/8" Unflg.
6 1/8" Flg.
6 1/8" Unflg.
50
50
50
51.5*
50
50
50
Frequency
Spectrum
PEVRMS
(arbitrary)
Description
3 1/8" Flg. To 1 5/8" EIA Flg. 50 ohms
1 5/8" Flg. To 7/8" EIA Flg. 50 ohms
3 1/8" Flg. To 6 1/8" EIA Flg. 50 ohms
DC Connector Plug
WATER-COOLED ACCESSORIES
Model
Product
6770-120
Wall Mounting Bracket
6770-130
Wall Mounting Bracket
6770-125
Wall Mounting Bracket
6770-125
Wall Mounting Bracket
5-898-6
Water Flow Switch
5-898-2
Water Flow Switch
5-898-3
Water Flow Switch
5-898-4
Water Flow Switch
5-898-7
Water Flow Switch
8750-115
Control Box Assembly
8750-230
Control Box Assembly
Power
10 kW
80kW
20 kW, 30 kW
40 kW, 50 kW
10 kW
20 kW
30 kW
40 kW, 50 kW
80kW
115 Vac, 50/60 Hz
230 Vac, 50/60 Hz
Table A
Multiple
Carriers
400
400V
C C C C
Table B
CW
C
Table C
AM
100% Mod.
200V
Table D
AM
75% Mod.
173V
Table E
SSB
1 Tone
(C)
Table F
SSB
2 Tones
100V
Model 43
4304A,
Mode
Mode
Mode
4308
Model
APM-16
1600W
—
—
400W
V
100W
100W
100W
100W
0%
100W
100W
V
400W
150W
100W
400W
100%
100W
150W
V
300W
127W
100W
300W
73%
100W
127W
V
100W
100W
100W
100W
0%
100W
100W
V
100W
50W
25W
100W
100%
40.5W
50W
100
100
V
22 V
100W
—
—
100W
—
—
—
100W
60.1W
2
2
2
2
100
(C)
MOD
—
100
100V
PEP%
400W
173
C
CW
1600W
200
C
PAVE
(Average
Heating
Power)
V
2
100
100V
PEP =
PEV2RMS
Z0
(C = Carrier)
FLANGE-TO-FLANGE ADAPTERS
DOLLIES
Model
6771-011
6772-011
****-677-1
****-677-2
Models 4314B, 4391A
Transmission Type
and Scope Pattern
2
THERMOSWITCHES FOR AIR-COOLED LOADS
Model
8630-013
8640-066
8890-008
8890-017
8892-333
8896-012
Function
Over Temp. Interlock
Over Temp. Interlock
Over Temp. Interlock
Over Temp. Interlock
Blower
Automatic
Temp. Set Point
Opens @ 86°C
Opens @ 77°C
Opens @ 236°C
Opens @ 226°C
Opens @ 60°C
Opens @ 100°C
Use With
8630 Series
8640/8650 Series
8890/8920 Series
8930 Series
8930 Series
BA-300-115, -230
Table G
SSB
Voice
For
8572A/8573A
10%
Table J
Pulse
(C)
C
90%
Models 4314B, 4391A only
Table H
TV Black
Level
Table I
Pulse
DUCTING
Model
8572-078
100V
100V
100
100V
2
C
100V
10%
100
C
90%
2
V
V
—
100W
—
100W
10W
—
100W
100%
400W
100W
130W
400W
—
59.6W
60.1W
—
10W
130W
100W
141V
141V
141V
(C)
(C)
(C)
400Z
400Z
400Z
…
……
*51.5 ohm with adapter 50 ohm.
39
Bird® Electronic Corporation 1-866-695-4569 www.bird-electronic.com
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
www.bird-electronic.com 1-866-695-4569 Bird® Electronic Corporation
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
40
Accessories
Technical Data
CASES
Model
CC-6
CC-1
EC-1
4300-061
4300-70
4300-085
4300-055
4300A215
7000A850
7002A870
Interpreting readings on peak Wattmeters
with Multicarrier, CW, AM, SSB,
and pulsed signals
Figure 1
Case Holders
Portable THRULINE® Wattmeter* and 4 elements
Portable THRULINE® Wattmeter* and 6 elements
12 elements
Model 43 or 43P Wattmeter, load, signal sampler, QC connectors, and 4 elements
Portable THRULINE Wattmeter*, test cable, screw driver, QC connectors, and 15 elements
4391 POWER ANALYST, signal sampler, and other accessories
4410 Wattmeter, load, elements, and other accessories
4412 Wattmeter and power sensors
AT-100, AT-400, AT-800 Antenna Testers
Site Analyzer
In the table below, Z° = 50 ohms, PEP is peak envelope power,
and PEV is peak envelope voltage. The PEV of the carrier
(or suppressed carrier) C was arbitrarily chosen at 100 volts
in all examples, PEVRMS = PEV .
1.414
The graph at right shows correlation of peak-envelope-power (PEP),
average heating power (PAVE ) and % modulation of AM signals
for Tables B, C, and D below.
*Includes THRULINE® Wattmeter Models: APM-16, 43, 43P, 4304A, 4308, 4314B, 4410A, 4430 and 4431.
MISCELLANEOUS
Model
3610-031
5-1864
5-1940
5A2229
5A2226
Use With
All Element Sockets
4314B
4314B
AT Series
AT Series
Description
Dummy Plug
Power Supply 115 V
Power Supply 230 V
Power Supply 120 V
Power Supply 230 V
COOLANTS
Model
5-030-3
5-1070-2
5-1134-3
Description
Volume/Pkg.
Refined Mineral Oil
DC-200 Silicone
Ethylene Glycol, Industrial Grade
1 Gallon Can
1 Gallon Can
1 Gallon Can
Model
4600-025
4712-015
4902-025
7500-076
Description
For 10 and 25 kW MODULOAD
For 50 kW MODULOAD
For ECONOLOAD, 115 Vac
For ECONOLOAD, 230 Vac
**** Add -677-1 or -677-2 to any ECONOLOAD Model No. (10 kW to 80 kW) to get it mounted
on a dolly with a control box, water flow switch and bracket (for an optional wattmeter).
8776-677-1 shown. -1 = 115 Vac 50/60 Hz, -2 = 230 Vac 50/60 Hz.
REPLACEMENT RESISTORS
Model
For
8731-031-1
8731 ECONOLOADS
8738A072
8730A/8738A ECONOLOADS
8755-027-2
8745/8746 ECONOLOADS
8755-027-3
8755/8756 ECONOLOADS
8755-027-4
8765/8766 ECONOLOADS
8755-027-5
8775/8776 ECONOLOADS
8792-010-2 one reqd.
8796 ECONOLOADS
8792-010-1 one reqd.
8792 ECONOLOADS
5A2388
8578A100 Forced-Air Load
5A2393
8578A150 Forced-Air Load
8572-021
8572 Forced-Air Load
COUPLING KITS
Model
4240-220
4712-020
4600-020
5-289
5-726
4902-020
5-1322
Power
10 kW
10 kW
20 kW
30 kW
40 kW
50 kW
60 kW
80 kW
10 kW
15 kW
25 kW
Line Type
OHMS
7/8" Flg.
1 5/8" Flg.
3 1/8" Flg.
3 1/8" Unflg.
3 1/8" Unflg.
6 1/8" Flg.
6 1/8" Unflg.
50
50
50
51.5*
50
50
50
Frequency
Spectrum
PEVRMS
(arbitrary)
Description
3 1/8" Flg. To 1 5/8" EIA Flg. 50 ohms
1 5/8" Flg. To 7/8" EIA Flg. 50 ohms
3 1/8" Flg. To 6 1/8" EIA Flg. 50 ohms
DC Connector Plug
WATER-COOLED ACCESSORIES
Model
Product
6770-120
Wall Mounting Bracket
6770-130
Wall Mounting Bracket
6770-125
Wall Mounting Bracket
6770-125
Wall Mounting Bracket
5-898-6
Water Flow Switch
5-898-2
Water Flow Switch
5-898-3
Water Flow Switch
5-898-4
Water Flow Switch
5-898-7
Water Flow Switch
8750-115
Control Box Assembly
8750-230
Control Box Assembly
Power
10 kW
80kW
20 kW, 30 kW
40 kW, 50 kW
10 kW
20 kW
30 kW
40 kW, 50 kW
80kW
115 Vac, 50/60 Hz
230 Vac, 50/60 Hz
Table A
Multiple
Carriers
400
400V
C C C C
Table B
CW
C
Table C
AM
100% Mod.
200V
Table D
AM
75% Mod.
173V
Table E
SSB
1 Tone
(C)
Table F
SSB
2 Tones
100V
Model 43
4304A,
Mode
Mode
Mode
4308
Model
APM-16
1600W
—
—
400W
V
100W
100W
100W
100W
0%
100W
100W
V
400W
150W
100W
400W
100%
100W
150W
V
300W
127W
100W
300W
73%
100W
127W
V
100W
100W
100W
100W
0%
100W
100W
V
100W
50W
25W
100W
100%
40.5W
50W
100
100
V
22 V
100W
—
—
100W
—
—
—
100W
60.1W
2
2
2
2
100
(C)
MOD
—
100
100V
PEP%
400W
173
C
CW
1600W
200
C
PAVE
(Average
Heating
Power)
V
2
100
100V
PEP =
PEV2RMS
Z0
(C = Carrier)
FLANGE-TO-FLANGE ADAPTERS
DOLLIES
Model
6771-011
6772-011
****-677-1
****-677-2
Models 4314B, 4391A
Transmission Type
and Scope Pattern
2
THERMOSWITCHES FOR AIR-COOLED LOADS
Model
8630-013
8640-066
8890-008
8890-017
8892-333
8896-012
Function
Over Temp. Interlock
Over Temp. Interlock
Over Temp. Interlock
Over Temp. Interlock
Blower
Automatic
Temp. Set Point
Opens @ 86°C
Opens @ 77°C
Opens @ 236°C
Opens @ 226°C
Opens @ 60°C
Opens @ 100°C
Use With
8630 Series
8640/8650 Series
8890/8920 Series
8930 Series
8930 Series
BA-300-115, -230
Table G
SSB
Voice
For
8572A/8573A
10%
Table J
Pulse
(C)
C
90%
Models 4314B, 4391A only
Table H
TV Black
Level
Table I
Pulse
DUCTING
Model
8572-078
100V
100V
100
100V
2
C
100V
10%
100
C
90%
2
V
V
—
100W
—
100W
10W
—
100W
100%
400W
100W
130W
400W
—
59.6W
60.1W
—
10W
130W
100W
141V
141V
141V
(C)
(C)
(C)
400Z
400Z
400Z
…
……
*51.5 ohm with adapter 50 ohm.
39
Bird® Electronic Corporation 1-866-695-4569 www.bird-electronic.com
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
www.bird-electronic.com 1-866-695-4569 Bird® Electronic Corporation
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
40
Technical Data
Required length of cable to equal 1⁄2 or 1 wavelength
when added to a THRULINE® wattmeter
Simple Solutions
When a Model APM-16, 43, 4431, 4314B or 4391A is used to match a load to a transmitter and a good match is obtained,
removing the instrument will not cause any change in the conditions, since a good 50 ohm load can be placed at the end
of a 50 ohm transmission line of any length without altering conditions at the transmitter.
What happens when the load is not well matched, as with an antenna with a VSWR of 1.5 or 2.0? Since the length of line between
a mismatched load and the source transforms the impedance of the load as seen at the source, line length now becomes critical.
If the adjustments for maximum power transfer were made with the Model 43 in place, removing it shortens the line by four inches,
plus two connectors. This still is no cause for concern at low frequencies where four to five inches is a small fraction of a wavelength.
At higher frequencies; e.g., above 100 MHz, power output and frequency of the source may be affected.
It is a principle of transmission line theory that the impedance is identical on either side of 1⁄2 wavelengths. In order to duplicate
the conditions in your transmission line with the above Model wattmeters either in or out of the line, it is only necessary to insert
or remove one or more 1⁄2 wavelengths. This is easily done by making up a length of cable which, when added to the THRULINE®,
equals one or more 1⁄2 wavelengths at the frequency of measurement. If more than one frequency is involved, one cable is
needed for each frequency.
Our mission is to combine our knowledge and technical innovation to solve the problems of our customers better
than anyone. We want to be the best customer-problem solver in the markets we serve. This means innovative
products and services, which make us the preferred supplier to our customers and the preferred work place for our
employees. We are committed to the principle of agility, to serve our existing customers better, and to be the first to
capitalize on change and new business opportunities.
Bird ® Technologies Group consists of Bird ® Electronic Corporation, TX RX Systems Inc. now including
Wacom Products, Bird ® Component Products, and Bird ® Service Center.
1) Physical cable length shown in inches is measured from
end to end of outer conductor of connectors (TNC and
N Male connectors), except for cables with UHF or
Mini-UHF plugs where the cable length is measured
from tip to tip of the center pins.
2) Dimensions shown are for solid polyethylene cable
(e.g., RG-58C/U, RG-8/U) which has 66% the velocity of
propagation relative to air. If so-called “RG-58 type” or
“RG-8 type” cables (which often contain foam polyethylene)
are used, the dimensions in the graph must be multiplied
by that cable’s relative velocity (say 79%) divided by 66%
(i.e., by a factor of 79% ÷ 66% = 1.2).
TYPICAL PEAK POWER RATINGS
Models
Avg.
Power
Pulse Width (µs)
10
100
1
150 W
500 W
1000 W
2.5 kW
5 kW
10 kW
10 kW
200 kW
200 kW
150 kW
150 kW
150 kW
8.0 kW
150 kW
150 kW
115 kW
115 kW
120 kW
100 kW
250 kW
250 kW
250 kW
250 kW
250 kW
77 kW
190 kW
190 kW
197 kW
197 kW
210 kW
1000
5000
5.75 kW
105 kW
105 kW
80 kW
80 kW
85 kW
3.5 kW
57 kW
57 kW
54 kW
54 kW
55 kW
2.0 kW
25 kW
25 kW
22 kW
22 kW
30 kW
56 kW
135 kW
135 kW
145 kW
145 kW
170 kW
32 kW
75 kW
75 kW
90 kW
97 kW
130 kW
16 kW
35 kW
40 kW
55 kW
65 kW
100 kW
Oil Dielectric Loads
8135
8201
8251
8890 Series
8920 Series
8930 Series
Direct Water-Cooled Loads
8730 Series
8740 Series
8750 Series
8760 Series
8770 Series
8790 Series
10 kW
20 kW
30 kW
40 kW
50 kW
80 kW
Electronic Corporation
TX RX Systems Inc.
Component Products
Service Center
Located in Solon, OH
Manufactures Easy-to-Use,
Now Including Wacom Products
Located In Largo, FL
Designs and Manufactures
Located in Cleveland, OH
Services and Calibrates
High-Quality, Convention
and Conduction-Cooled
RF loads, Attenuators,
Power Dividers,
and Couplers.
Bird® and Other Popular
Name Brands of Test
Rugged, Reliable Antenna
& Cable Testing,
Power Measurement,
Power Termination,
and System Test Products.
Located in Angola, NY
Designs and Manufacturers
Multicouplers, Combiners,
Duplexers, Signal Boosters,
Antenna, and a Range
of RF Components.
30303 Aurora Rd.
Solon, OH 44139
Tel: 866-695-4569
Fax: 866-546-4306
[email protected]
www.bird-electronic.com
8625 Industrial Parkway
Angola, NY 14006
Tel: 716-549-4700
Fax: 716-549-4772
[email protected]
www.txrx.com
10950 72nd Street North
Suite 107
Largo, Florida 33777-1527
Tel: 727-547-8826
Fax: 727-547-0806
[email protected]
www.birdfla.com
Laboratory
Cert. No. 1924.01
Equipment.
30303 Aurora Rd.
Solon, OH 44139
Tel: 440-519-2298
Fax: 440-519-2326
[email protected]
www.bird-technologies.com
Note: The duty factor should be such that the average power rating of the load is never exceeded.
41
Bird® Electronic Corporation 1-866-695-4569 www.bird-electronic.com
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
www.bird-electronic.com 1-866-695-4569 Bird® Electronic Corporation
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment.
42
Technical Data
Required length of cable to equal 1⁄2 or 1 wavelength
when added to a THRULINE® wattmeter
Simple Solutions
When a Model APM-16, 43, 4431, 4314B or 4391A is used to match a load to a transmitter and a good match is obtained,
removing the instrument will not cause any change in the conditions, since a good 50 ohm load can be placed at the end
of a 50 ohm transmission line of any length without altering conditions at the transmitter.
What happens when the load is not well matched, as with an antenna with a VSWR of 1.5 or 2.0? Since the length of line between
a mismatched load and the source transforms the impedance of the load as seen at the source, line length now becomes critical.
If the adjustments for maximum power transfer were made with the Model 43 in place, removing it shortens the line by four inches,
plus two connectors. This still is no cause for concern at low frequencies where four to five inches is a small fraction of a wavelength.
At higher frequencies; e.g., above 100 MHz, power output and frequency of the source may be affected.
It is a principle of transmission line theory that the impedance is identical on either side of 1⁄2 wavelengths. In order to duplicate
the conditions in your transmission line with the above Model wattmeters either in or out of the line, it is only necessary to insert
or remove one or more 1⁄2 wavelengths. This is easily done by making up a length of cable which, when added to the THRULINE®,
equals one or more 1⁄2 wavelengths at the frequency of measurement. If more than one frequency is involved, one cable is
needed for each frequency.
Our mission is to combine our knowledge and technical innovation to solve the problems of our customers better
than anyone. We want to be the best customer-problem solver in the markets we serve. This means innovative
products and services, which make us the preferred supplier to our customers and the preferred work place for our
employees. We are committed to the principle of agility, to serve our existing customers better, and to be the first to
capitalize on change and new business opportunities.
Bird ® Technologies Group consists of Bird ® Electronic Corporation, TX RX Systems Inc. now including
Wacom Products, Bird ® Component Products, and Bird ® Service Center.
1) Physical cable length shown in inches is measured from
end to end of outer conductor of connectors (TNC and
N Male connectors), except for cables with UHF or
Mini-UHF plugs where the cable length is measured
from tip to tip of the center pins.
2) Dimensions shown are for solid polyethylene cable
(e.g., RG-58C/U, RG-8/U) which has 66% the velocity of
propagation relative to air. If so-called “RG-58 type” or
“RG-8 type” cables (which often contain foam polyethylene)
are used, the dimensions in the graph must be multiplied
by that cable’s relative velocity (say 79%) divided by 66%
(i.e., by a factor of 79% ÷ 66% = 1.2).
TYPICAL PEAK POWER RATINGS
Models
Avg.
Power
Pulse Width (µs)
10
100
1
150 W
500 W
1000 W
2.5 kW
5 kW
10 kW
10 kW
200 kW
200 kW
150 kW
150 kW
150 kW
8.0 kW
150 kW
150 kW
115 kW
115 kW
120 kW
100 kW
250 kW
250 kW
250 kW
250 kW
250 kW
77 kW
190 kW
190 kW
197 kW
197 kW
210 kW
1000
5000
5.75 kW
105 kW
105 kW
80 kW
80 kW
85 kW
3.5 kW
57 kW
57 kW
54 kW
54 kW
55 kW
2.0 kW
25 kW
25 kW
22 kW
22 kW
30 kW
56 kW
135 kW
135 kW
145 kW
145 kW
170 kW
32 kW
75 kW
75 kW
90 kW
97 kW
130 kW
16 kW
35 kW
40 kW
55 kW
65 kW
100 kW
Oil Dielectric Loads
8135
8201
8251
8890 Series
8920 Series
8930 Series
Direct Water-Cooled Loads
8730 Series
8740 Series
8750 Series
8760 Series
8770 Series
8790 Series
10 kW
20 kW
30 kW
40 kW
50 kW
80 kW
Electronic Corporation
TX RX Systems Inc.
Component Products
Service Center
Located in Solon, OH
Manufactures Easy-to-Use,
Now Including Wacom Products
Located In Largo, FL
Designs and Manufactures
Located in Cleveland, OH
Services and Calibrates
High-Quality, Convention
and Conduction-Cooled
RF loads, Attenuators,
Power Dividers,
and Couplers.
Bird® and Other Popular
Name Brands of Test
Rugged, Reliable Antenna
& Cable Testing,
Power Measurement,
Power Termination,
and System Test Products.
Located in Angola, NY
Designs and Manufacturers
Multicouplers, Combiners,
Duplexers, Signal Boosters,
Antenna, and a Range
of RF Components.
30303 Aurora Rd.
Solon, OH 44139
Tel: 866-695-4569
Fax: 866-546-4306
[email protected]
www.bird-electronic.com
8625 Industrial Parkway
Angola, NY 14006
Tel: 716-549-4700
Fax: 716-549-4772
[email protected]
www.txrx.com
10950 72nd Street North
Suite 107
Largo, Florida 33777-1527
Tel: 727-547-8826
Fax: 727-547-0806
[email protected]
www.birdfla.com
Laboratory
Cert. No. 1924.01
Equipment.
30303 Aurora Rd.
Solon, OH 44139
Tel: 440-519-2298
Fax: 440-519-2326
[email protected]
www.bird-technologies.com
Note: The duty factor should be such that the average power rating of the load is never exceeded.
41
Bird® Electronic Corporation 1-866-695-4569 www.bird-electronic.com
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment. (page 42)
www.bird-electronic.com 1-866-695-4569 Bird® Electronic Corporation
Bird Service Center Now calibrates NON-Bird as well as Bird electrical test equipment.
42
Simple Solutions
Antenna & Cable Testing
Power Measurement
Power Termination
Test Systems
Attenuation
RF Components
Service & Calibration
Electronic Corporation
A Member of Bird® Technologies Group
®
30303 Aurora Road, Cleveland, OH 44139-2794
Tel:1-866-695-4569
Fax: 1-866-546-4306
Email: [email protected]
Website: http://www.bird-electronic.com
Celebrating 60 years of providing solutions to our customers
© 2002 Bird® Electronic Corporation.
871-BEC-147-0302
Service and
Calibration
solutions
The American Association
for Laboratory Accreditation
Service Center
A Member of Bird Technologies Group
30303 Aurora Road, Cleveland, OH 44139-2794
Tel: 440-519-2298
Fax: 440-519-2326
Email: [email protected]
Website: http://www.bird-technologies.com
Service Center
A Member of Bird Technologies Group
© 2002 Bird Technologies Group
871-BSC035-0302
Laboratory
Cert. No. 1924.01
Service and
Calibration
solutions
The American Association
for Laboratory Accreditation
Service Center
A Member of Bird Technologies Group
30303 Aurora Road, Cleveland, OH 44139-2794
Tel: 440-519-2298
Fax: 440-519-2326
Email: [email protected]
Website: http://www.bird-technologies.com
Service Center
A Member of Bird Technologies Group
© 2002 Bird Technologies Group
871-BSC035-0302
Laboratory
Cert. No. 1924.01
Bird
Service Center (BSC)
One-Stop
Shop
Service and Calibration Solutions.
Bird Service Center is your one-stop shop for Calibration
Provides
of Electronic Equipment
Service and
Calibration
Service
•
•
•
•
•
•
Reliable Service and Customer Care
NIST Traceable Calibrations
Commercial Calibration
Annual Service Contract Options
Extended Warranty Options
Certificate of Calibration provided
with each order
• Technical Assistance
1
Calibration/Performance
Testing Capability Last update 15FEB02kd
Application
RF Power
Complex Impedance
Attenuation
Frequency
DC Volts
DC Current
DC Resistance
AC Volts
AC Current
Bird Express ✈
Increase your standard calibration turn-time!
1 A2LA accreditation applies to the granted Scope of Accreditation dated 24JAN02 and
certificate No. 1924.01. This may differ from BSC calibration/ performance testing capabilities.
For accredited parameters, this document is available for review upon request.
Quality
Laboratory
Cert. No. 1924.01
•
•
•
•
•
Range of Capability
Frequency: 100kHz thru’ 18.6GHz
Power: -117dBm thru’ +73dBm
(2fW to 20kW)
Frequency: 30kHz thru’ 20GHz
Frequency: 30kHz thru’ 20GHz
Attenuation To 120dB
Range: 10Hz thru’ 26.5GHz
1mV thru’ 2.5kV
10µA thru’ 15A
1Ω thru’ 100 Mega- Ω
1mV thru’ 2.5kV
10µA thru’ 15A
Calibrations are NIST traceable
Meet the requirements of ISO/IEC 17025
MRP II Class A Systems
ISO 9000: 1994 Audited
A2LA Accredited Laboratory
Experience
• BSC personnel has over 130 years of
combined product and Calibration Experience
• Technology specialists in Calibration
• Experienced Service Technicians and
Product Experts
Product Calibration/Performance Testing Examples
Frequency Counters
Digital Volt Meters
Data Loggers
Process Calibrators
Vector Network Analyzers
Scalar Network Analyzers
Sweep Generators
Synthesized Generators
Attenuators
Resistive Devices
Power Sensors
Couplers
Impedance Devices
Spectrum Analyzers
Signal Generators
Digital Multimeters
Power Meters
Expiration April 1, 2003
Save
Call and Save!
440.519.2298
5% off your next non Bird calibration.
take an additional
*Please contact Bird Service Center for more details.
Tel: 440-519-2298
Fax: 440-519-2326
www.bird-technologies.com
5% off any order with use of credit card.
Bird
Service Center (BSC)
One-Stop
Shop
Service and Calibration Solutions.
Bird Service Center is your one-stop shop for Calibration
Provides
of Electronic Equipment
Service and
Calibration
Service
•
•
•
•
•
•
Reliable Service and Customer Care
NIST Traceable Calibrations
Commercial Calibration
Annual Service Contract Options
Extended Warranty Options
Certificate of Calibration provided
with each order
• Technical Assistance
1
Calibration/Performance
Testing Capability Last update 15FEB02kd
Application
RF Power
Complex Impedance
Attenuation
Frequency
DC Volts
DC Current
DC Resistance
AC Volts
AC Current
Bird Express ✈
Increase your standard calibration turn-time!
1 A2LA accreditation applies to the granted Scope of Accreditation dated 24JAN02 and
certificate No. 1924.01. This may differ from BSC calibration/ performance testing capabilities.
For accredited parameters, this document is available for review upon request.
Quality
Laboratory
Cert. No. 1924.01
•
•
•
•
•
Range of Capability
Frequency: 100kHz thru’ 18.6GHz
Power: -117dBm thru’ +73dBm
(2fW to 20kW)
Frequency: 30kHz thru’ 20GHz
Frequency: 30kHz thru’ 20GHz
Attenuation To 120dB
Range: 10Hz thru’ 26.5GHz
1mV thru’ 2.5kV
10µA thru’ 15A
1Ω thru’ 100 Mega- Ω
1mV thru’ 2.5kV
10µA thru’ 15A
Calibrations are NIST traceable
Meet the requirements of ISO/IEC 17025
MRP II Class A Systems
ISO 9000: 1994 Audited
A2LA Accredited Laboratory
Experience
• BSC personnel has over 130 years of
combined product and Calibration Experience
• Technology specialists in Calibration
• Experienced Service Technicians and
Product Experts
Product Calibration/Performance Testing Examples
Frequency Counters
Digital Volt Meters
Data Loggers
Process Calibrators
Vector Network Analyzers
Scalar Network Analyzers
Sweep Generators
Synthesized Generators
Attenuators
Resistive Devices
Power Sensors
Couplers
Impedance Devices
Spectrum Analyzers
Signal Generators
Digital Multimeters
Power Meters
Expiration April 1, 2003
Save
Call and Save!
440.519.2298
5% off your next non Bird calibration.
take an additional
*Please contact Bird Service Center for more details.
Tel: 440-519-2298
Fax: 440-519-2326
www.bird-technologies.com
5% off any order with use of credit card.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement