Contents
Contents
SAFETY AND MAINTENANCE ..................................................................1
Safety Instructions ........................................................... 1
Data Security ................................................................ 2
Repair .......................................................................... 2
Operating Environment................................................... 2
Ambient temperature ..................................................... 2
Electromagnetic Compatibility.......................................... 3
Connection ................................................................... 3
Battery Operation .......................................................... 4
Maintenance .................................................................... 4
Care of the Display ........................................................ 5
Transport ..................................................................... 5
Notes on these Operating Instructions ................................. 6
Audience ...................................................................... 6
Quality ......................................................................... 6
Service......................................................................... 6
Supplied Items................................................................. 7
GETTING STARTED ..............................................................................9
Views ...........................................................................
Front Components ..........................................................
Back Components ........................................................
Bottom Components.....................................................
Left Components .........................................................
Top Components ............................................................
USB-Docking Station.......................................................
Initial Set-up of the Pocket PC ..........................................
Step 1: Switch On Power Supply ....................................
Step 3: Installing the Software ......................................
Step 4: Connecting to the computer ...............................
Step 5: Using the Pocket PC ..........................................
Working with Memory Cards.............................................
Inserting Memory Cards................................................
Removing Memory Cards ..............................................
Accessing Memory Cards ..............................................
Data exchange via card reader ......................................
Resetting the Pocket PC...................................................
Soft-Reset ..................................................................
Hard-Reset .................................................................
10
10
11
12
13
14
15
16
16
20
23
23
25
25
25
26
26
27
27
27
NAVIGATION ....................................................................................29
Safety Instructions for Navigation .....................................
Tips for Navigation .......................................................
Notes for Use in a Vehicle .............................................
Additional Notes for Use on a Bicycle or a Motorcycle ............
GPS (Global Positioning System).......................................
Contents of the Navigation CD..........................................
Memory Card Quick Installation ........................................
Software Installation on your PC .......................................
Mounting the Navigation Set on a Bicycle ...........................
Mounting the Navigation Set in a Car.................................
Installation of the Holder of the Pocket PC............................
Aerial Orientation.........................................................
Connecting Pocket PC in the car.....................................
Starting Navigation ......................................................
29
29
30
30
31
32
32
34
35
36
36
37
38
38
FAQ ...............................................................................................39
CUSTOMER SERVICE ..........................................................................41
First-Aid in the Event of Malfunction ..................................
Check Connections and Cables.......................................
Faults and Possible Causes............................................
Additional Support ..........................................................
Warranty.......................................................................
Liability limitations .......................................................
Copying this manual.....................................................
End User License Agreement for Microsoft® Software (EULA)
41
41
42
44
45
46
46
47
INDEX .............................................................................................51
ii
SAFETY AND MAINTENANCE
SAFETY INSTRUCTIONS
Please read this section carefully and follow all the instructions
given. This will help ensure reliable operation and extend the service life for your Pocket PC.
Keep the packaging and the user instructions for future reference
or inquiries at a later date. If you pass the article on to another
person, you must pass on these instructions.
¾ Never allow children to play with electrical equipment unsupervised. Children may not always correctly recognize possible
danger.
¾
Never open up the housing of the Pocket PC or the power
adapter. These contain no user-serviceable parts. If the housing
is opened there is a danger to life from electric shock.
¾
Do not place any objects on the Pocket PC and do not exert any
pressure on the display. Otherwise there is a danger that the
screen will break.
¾
To avoid damage, do not touch the screen with sharp objects.
Use only the stylus provided.
¾
There is a risk of injury if the display breaks. If this should occur, use protective gloves to pack the broken parts and contact
customer support to arrange for disposal. Then wash your hands
with soap, since there is a possibility that chemicals may have
escaped.
Remove the power adapter from the outlet, switch the Pocket PC
off immediately, or do not actually switch it on, and contact
Customer Service...
¾
... if the power adapter or the attached plug become scorched or
damaged.
¾
... if the housing of the Pocket PC, the Power Pack or the charging/synchronizing cradle becomes damaged or fluids leak into it.
Components must be checked by Customer Service in order to
avoid damage!
SAFETY AND MAINTENANCE
1
DATA SECURITY
¾
Every time you update your data make backup copies on an external storage medium. The supplier does not assume liability
for data loss or damage to data storage units, and no claims can
be accepted for damages resulting from the loss of data or for
consequential damages.
REPAIR
¾
If you do not have the necessary qualifications, ensure that this
is done by a suitably qualified Service Engineer. Please contact
our Service Center if you encounter technical problems with
your Pocket PC.
¾
In the event repair becomes necessary, please use only our
authorized Service Partners.
OPERATING ENVIRONMENT
¾
Keep your Pocket PC and all connected devices away from moisture and avoid dust, heat and direct sunlight, especially in the car.
¾
Make sure you protect your Pocket PC from getting wet, e.g.
from rain and hail, at all times. Please pay attention that
moisture can even build up in a protective pouch because of
condensation.
¾
Avoid heavy vibrations and shaking, such as can arise, for
example, in the case of transverse field intrusions.
¾
Avoid the device from releasing itself from its holder, for example when braking. Install the device as vertically as possible.
Failure to follow these instructions may lead to damage to your
Pocket PC. The guarantee will be excluded in such cases.
AMBIENT TEMPERATURE
The Pocket PC is most reliably operated at an ambient temperature of between 41°F and 104°F (5°C and 40°C) and at a relative
humidity of between 10% and 90% (non-condensing).
2
¾
In the powered down state (power supply: OFF, see page 16)
the Pocket PC can be stored at between 32°F and 140°F (0°C
and 60°C).
¾
Store the Pocket PC in a safe location to avoid high temperatures (e.g. when parking or from direct sunlight).
ENGLISH
ELECTROMAGNETIC COMPATIBILITY
¾
When connecting additional or other components the “Electromagnetic Compatibility Directive” (EMC) must be adhered to.
Please also note that only screened cable (maximum 10ft)
should be used with this Pocket PC.
¾
For optimal performance, maintain a distance of at least 10 ft.
from sources of high-frequency and magnetic interference
(televisions, loudspeaker systems, mobile telephones and so
on. This will help avoid malfunctions and loss of data.
CONNECTION
When connecting your Pocket PC be sure to correctly observe the
following instructions:
POWER SUPPLY
¾
The outlet must be in the vicinity of the Pocket PC and must be
easily accessible.
¾
Only use the mains adapter on grounded sockets at 100–240
V~ AC, 50/60 Hz. If you are unsure about the power supply to
the place of use, ask the relevant energy supplier.
¾
Use only the power adapter provided with your Pocket PC.
¾
For additional safety, we recommend the use of a surge protector in order to protect your Pocket PC from damage from spikes
or lighting strikes on the power network.
POWER THROUGH CAR ADAPTER
¾
The car adapter should only be connected to the lighter socket
of a car (car battery = DC 12V , no trucks!). If you are in any
doubt about the power source in your car, contact your car manufacturer.
CABLING
¾
Arrange cables so that no-one can tread on them or trip over
them.
¾
Do not place any items on the cable.
SAFETY AND MAINTENANCE
3
BATTERY OPERATION
Your Pocket PC is operated with a removable battery. In order to prolong the life and efficiency of your battery and to ensure safe operation, follow the instructions below:
¾ Caution! Danger of explosion if rechargeable batteries are
not changed properly. Only replace with the same type of
battery or a similar type recommended by the manufacturer.
Never open the rechargeable battery. Do not throw the rechargeable battery into fire. Dispose of the used batteries following the manufacturer's instructions.
¾
Batteries cannot withstand heat. Avoid the Pocket PC and the
integrated battery becoming overheated. Failure to comply with
this instruction may lead to damage to and even explosion of
the battery.
¾
Use only the original power pack to charge the battery or the car
adapter from the optional navigation kit.
¾
The Pocket PC and its batteries are special category
waste. When disposing of the Pocket PC ensure that this is
done correctly. Contact Customer Service for more details.
MAINTENANCE
Â
Warning: There are no user-serviceable or cleanable
parts inside the Pocket PC housing.
You can prolong the life of the Pocket PC by taking the following
simple steps:
4
¾
Always remove the power plug and all connecting cables before
cleaning.
¾
Clean the Pocket PC only with a damp, lint-free cloth.
¾
Do not use solvents, caustic or gaseous cleaners.
ENGLISH
CARE OF THE DISPLAY
¾
Avoid scratching the display surface as this is easily damaged. It
is strongly recommended to use a display protection mylar to
avoid scratches. Please ask your nearest dealer for this accessorie.
¾
Ensure that no traces of water remain on the screen. Water can
cause irreversible discoloration.
¾
Use only a soft, lint-free cloth to clean the screen.
¾
Do not expose the screen to either strong sunlight or ultraviolet
radiation.
TRANSPORT
If you wish to transport the Pocket PC follow the instructions below:
¾ Following transport of the Pocket PC wait until the unit has acclimatized before using it.
¾
In the case of wide fluctuations in temperature or humidity condensation or moisture may form inside the Pocket PC and this
can cause an electrical short-circuit.
¾
In order to protect the Pocket PC from dirt, knocks and
scratching, use either the protective case or the storage
pocket with transparent window.
¾
When shipping your Pocket PC use only the original packaging
and advise the carrier
accordingly.
¾
Before traveling ensure that you are aware of the power and
communications provision at your destination. Before traveling
obtain any power or communications adapters (modem, LAN,
etc.) that may be needed.
¾
When passing through the hand luggage control at airports, it
is recommended that you pass the Pocket PC and all magnetic
storage media (external hard drives) through the
X-ray system (the machine on which you place your bags).
Avoid the magnetic detector (the structure through which you
yourself pass) or the magnetic wand (the hand device that
the security staff use), since this may corrupt your data.
SAFETY AND MAINTENANCE
5
NOTES ON THESE OPERATING INSTRUCTIONS
When using the application programs and the operating system
you can use the extensive help functions that are available at the
touch of a button. These help functions are made available when
you use the Microsoft Windows® operating system or the respective application program.
¾ Note: You can find detailed instructions on navigation (optional) and how to use the Pocket PC program on the corresponding CD.
For additional help, also use the extensive help functions, which
are available at a click of a button (usually F1 on the PC) or by
touching the question mark (on the Pocket PC). This help is available while you use the computer or Pocket PC.
Read the section "Frequently Asked Questions" to obtain answers
to questions that are often addressed to our customer service.
The purpose of this manual is to help you with installing your
Pocket PC using instruction that are easy to understand.
AUDIENCE
These operating instructions are aimed at first-time and experienced
users alike. The bundled product CD contains a comprehensive instruction manual.
QUALITY
In selecting the components we have aimed for a high level of
functionality, simple handling, safety and reliability. A wellbalanced hardware and software design allows us to offer you a
technologically advanced Pocket PC that will give great satisfaction in both work and leisure use.
SERVICE
Our individual customer care is there to support you when you
have questions or problems. Please get in touch – we look forward
to helping you. This manual contains a special section on Customer Service starting on page 41.
6
ENGLISH
SUPPLIED ITEMS
Please check the integrity and completeness of the supplied items
and, in the case this is not complete, forward us any possible
claims within 14 days from the purchase date. The purchase
package includes:
Pocket PC
USB docking station (charging/synchronization docking station)*
ActiveSync®-cable* for charging and synchronizing*
AC adaptor, adaptor plug (for the country in question) as well as a
connection plug* for direct connection of the power supply to
the ActiveSync®-connection
Microsoft Companion CD
Instruction manual and warranty card
Bicycle fixture *
Car holder of the Pocket PC with flexible neck*
Power cable for 12V cigarette lighter*
CD with navigation software (see page 34)
Earphones*
Protective case and storage pocket *
Pre-installed memory card(s) MMC/SD*
* optional
SAFETY AND MAINTENANCE
7
8
ENGLISH
GETTING STARTED
This chapter introduces you to the external components of your
Pocket PC and guides you through the process of setting up your
Pocket PC for use.
The illustrations on the following pages introduce you to the
various buttons, connectors, ports and features of your Pocket PC.
GETTING STARTED
9
VIEWS
FRONT COMPONENTS
Ref Component
Description
n
Touch Screen
o
Program
Button
Notes
p
q
Microphone
Receives sound and voice to record voice.
r
Loudspeaker
10
(Touch-sensitive screen)
Displays the output of your Pocket PC. Tap
the screen with the stylus to select menu
commands or enter information.
Navigationpad Moves up, down, left or right by pushing the
corresponding area of the pad. Press the
centre button to confirm your selection.
Sends out music, sounds and voice.
ENGLISH
Ref Component
Description
s
Battery
Charge
Indicator
Lights orange to indicate that battery
charging is in progress and lights green
when the battery is fully charged.
t
Notification
Indicator
Flashes red to inform you of scheduled
appointments, alarms and reminders.
BACK COMPONENTS
Ref Component
n
o
p
Description
GPS antenna Integrated (hinged) GPS antenna
External
aerial connection
Main switch
Connection for an optional second aerial.
The Pocket PC is switched on and off
completely with this switch.
Switching off during operation will lead to the
complete loss of data (hard reset).
GETTING STARTED
11
BOTTOM COMPONENTS
n
Ref Component
n
12
®
ActiveSync Connector
Description
Connects to your desktop compute for
synchronizing data.
ENGLISH
LEFT COMPONENTS
Ref Component
Description
n
Lanyard
Eyelet
Lanyard attaches to this opening.
o
On/Off
Button
Turns your Pocket PC on or off by pressing
briefly.
Turns the screen backlight on or off by
pressing and holding for approx. 3 seconds.
p
Record Button / GPSButton
The Memo function is started by means of
this button. It can be converted to
switching the GPS receiver on and off
manually by means of ‘Setting / System /
Medion Utility / GPS.
q
Reset Button Restarts your Pocket PC. (Soft-Reset), see
page 27.
Connects to a pair of stereo headphones
Headphone
(2,5 mm).
r
GETTING STARTED
13
TOP COMPONENTS
Ref Component
n
o
p
14
Description
IR Port
Beams files to other mobile devices.
SD/MMC
Slot
Accepts an optional SD (Secure Digital) or
MMC (MultiMediaCard) card for removable
storage.
Stylus
Take the pen out of its compartment in order
to use it, and replace it after use. The pointer
pen is required for operating the touch
screen.
ENGLISH
USB-DOCKING STATION
¾
Warning: The docking station may only be used with the
supplied AC adaptor (Phihong PSC05R-050) and this Pocket PC.
The optional USB docking station is a very useful way of charging
and synchronizing your Pocket PC with a computer. You can also
use the optional ActiveSync® Cable for connecting to the Pocket
PC directly without using the docking station.
ASSEMBLY OF THE USB-DOCKING STATION
Plug the plastic holder onto the docking station carefully. The two
noses must click in left and right.
OVERVIEW OF THE DOCKING STATION:
p
Plastic holder
Ref Component
n
o
PPC Connector
p
USB-Cable
Description
Connects to your Pocket PC.
Power Connector Connects to the AC adapter.
For connecting the USB-Docking
Station to a USB-port.
GETTING STARTED
15
INITIAL SET-UP OF THE POCKET PC
The following guides you step by step through the initial set up of
the Pocket PC.
First, remove the protective transport foil from the display and
from the infrared interface, if necessary.
STEP 1: SWITCH ON POWER SUPPLY
Switch the main switch on the back of the Pocket PCs to ON.
¾
Attention: Always leave the main
switch at the ON position, unless
you would like to carry out a new
initial setting. If the switch is
moved to OFF, you will lose all
the data in your Pocket PC and
you will have to carry out the initial setting again.
1. The Pocket PC automatically starts
the initial set-up. The brand logo
appears and a few seconds later
the Pocket PC displays the Windows® Mobile 2003 welcome
screen.
2. With the stylus give the screen one
short touch and follow the instructions that are displayed to you.
3. Select the time zone by tapping on the dateline on the startup screen and adjust time and date.
¾
Attention: It can be necessary to charge the Pocket PC for
some time initially before the initial installation can be run
through, according to the charging status of the battery installed.
16
ENGLISH
CHARGE THE BATTERY OF THE POCKET PC
You have various possibilities of charging the battery of the
Pocket PC:
¾ With the assistance of the ActiveSync® Cable
¾ Through the docking station
¾ With the assistance of the connector
¾ Through the car adapter (see P. 38)
¾ The charging status display lights orange until the Pocket PC
is charged. Do not interrupt the charging process before the
battery is fully charged. This may take a few hours. The
Pocket PC is fully charged if the charging display lights green.
¾ Note: You can use the Pocket PC during the charging process, but the power supply must not be interrupted during initial set-up.
¾ Leave the mains adapter connected to the Pocket PC for
around 24 hours, so that the integrated battery can chargeup fully.
¾ You can leave the main adapter connected, and this is very
handy for continuous operation. In this way the Pocket PC is
always being recharged when it is connected to the synchronisation computer. However, the mains adapter also requires
power even when it is not charging up the battery of the
Pocket.
GETTING STARTED
17
CHARGING WITH THE ACTIVESYNC® CABLE
q
(similar picture)
Push the adapter plug (q) into the guide on the back of the power
adapter. Plug the power adapter (p) into a power outlet that is
easy to reach.
Plug the cable of the power adapter (o) into the USB connector
on the ActiveSync® cable and the ActiveSync connector into the
ActiveSync® connection of the Pocket PC (n).
Do not connect the ActiveSync® cable to your PC before the software is set up initially!
18
ENGLISH
CHARGING THROUGH THE DOCKING STATION
1. Prepare the network adapter as described in the case of the
ActiveSync cable and connect the cable of the power
adapter to the USB connector.
2. Push the Pocket PC into the USB docking station carefully
(see P. 15).
Do not connect the USB cable of the docking station to your PC
before setting up the software for the first time!
GETTING STARTED
19
CHARGING WITH THE ASSISTANCE OF THE OPTIONAL CONNECTOR
If you are using the connector, plug the
connecting cable into the end of the
connector and connect them to the
ActiveSync® connection together.
STEP 3: INSTALLING THE SOFTWARE
¾
Warning: When software is installed, important files may be
overwritten and changed. Create a suitable backup of your
hard drive so you can access the original files in the event of
problems.
¾
Windows 2000/XP: You need to have administrative permissions on your Computer in order to install software.
1. Insert the Companion CD supplied and wait for the program to start automatically.
¾
Note: If the program does not start automatically, the Setup
program on the CD must be started.
2. The following window appears with a short introduction.
Wait for a few seconds or click the triangle to skip the intro.
3. Click the Start here button and follow the instructions on
the screen in order to install the necessary software.
20
ENGLISH
INSTALLING MICROSOFT® OUTLOOK
For optimum management of your data (e-mails, contacts, dates,
etc.) using the Pocket PC, you need the Microsoft® Outlook program.
The cost of the Pocket PC includes a license for this program
which can be found on the CD. If you already have Microsoft®
2002 installed on your PC, continue with the next step for installation of Microsoft® ActiveSync®. Likewise, if you have Outlook
98 or Outlook 2000, perform this installation:
1. Click Install Outlook 2002 .
¾
On the right of the window a product description appears with
further installation instructions.
2. Now click Install.
3. A dialog box appears that informs you that a program now
has to be installed. Click OK.
You are now asked whether you want to open the file or store it
on the PC. Select the Open option here and follow the instructions on the screen. You will find the Product Key on the CD
sleeve. Have your Windows® CD ready as well in case it is
needed.
Microsoft® Outlook 2002 must be activated by telephone or
via the Internet. If this is not done, the program will no longer
start after the 50th time.
GETTING STARTED
21
INSTALLING MICROSOFT® ACTIVESYNC®
In order to synchronize your data (e-mails, contacts, dates, etc.)
between your PC and the Pocket PC, you need the Microsoft®
ActiveSync® program.
The cost of the Pocket PC includes a license for this program
which can be found on the CD.
¾
If you do not have Microsoft® Outlook 2002 on your PC,
please install Outlook 2002 following the directions above.
¾
Attention: You should not connect the Pocket PC to your
computer yet.
1. Start Windows® and re-insert the CD supplied in order to
again display the installation menu you are already familiar with.
2. Click Install ActiveSync® .
¾ On the right side of the window you will see more details
about the ActiveSync® software and additional hints for installation.
3. Click now on Install.
4. A dialog box appears that informs you that a program now has to
be installed. Click OK .
5. You are now asked whether you want to open the file or store
it on the PC. Select the Open option here and follow the instructions on the screen.
6. If testing the connection options, insert the Pocket PC in the
charging/synchronization docking station (see next page).
¾ If other programs have been bundled, you will find these on
your Companion CD under: Enhance Your Experience Ö
Mobility or Entertainment.
22
ENGLISH
STEP 4: CONNECTING TO THE COMPUTER
1. Start the Pocket PC, by operating the On/Off switch.
2. Ensure that the Pocket PC is inserted in the USB docking station.
3. Plug the USB plug into a free USB slot on your computer.
¾
The hardware installation assistant will now detect a new
device and install a suitable driver. This may take a few
minutes. If unsuccessful the first time, repeat the connection
attempt.
4. Follow the instructions on your screen. The program will
now set up a partnership between your PC and the Pocket
PC. As a result of the synchronisation your data (mail, contacts, appointments, etc.) will be automatically transferred
to your Pocket PC.
STEP 5: USING THE POCKET PC
OPERATING THE POCKET PC
1. Take the Pocket PC out of the docking station.
In order to execute a function or a program ...
- Use the stylus to tap
and then the desired option.
- Press the program keys of the Pocket PC in order to start the desired program. The underlying programs can be defined using
Start Ö Settings Ö Buttons .
2.
Explanations of the operation and functionality of the programs can be obtained from Start Ö Help .
GETTING STARTED
23
SYNCHRONIZATION BETWEEN POCKET PC AND PC
When you insert the Pocket PC in the charging/synchronization
docking station, Microsoft ActiveSync® is automatically started.
The program checks if the Pocket PC is one with which a partnership has already been established.
If this is the case the changes that have taken place on the PC
and on the Pocket PC since the last synchronization are compared
and reconciled.
In the Settings menu of the Microsoft ActiveSync® program
you can define precisely which rules are to be applied during
synchronization.
Call up the program Help (by pressing F1) in order to see the
effects of the corresponding settings.
If the Pocket PC is not recognized as a partner, restricted guest
access is automatically activated that allows, for example, data to
be exchanged.
If this should occur even though there is a registered partnership,
remove the Pocket PC from the charging/synchronization docking
station and switch it off and on again.
Re-insert the Pocket PC in the charging / synchronization docking
station in order to restart the identification process. If this still does
not work, repeat the process and also restart your PC.
If you have changed the device name in the Pocket PC this may
be the cause of this malfunction. Please remember this if you
change the name of the Pocket PC under Start Ö Settings .
Change the device name of the Pocket PC if necessary, if it does
not correspond with the device name stored by ActiveSync®.
24
ENGLISH
WORKING WITH MEMORY CARDS
Your Pocket PC supports MMC and SD memory cards.
INSERTING MEMORY CARDS
1. Carefully take the memory card out of its
packing (if included). Take care not to touch or
dirty the contacts.
2. Push the memory card carefully into the card
bay as shown. The side of the memory card
wearing the label must point upwards. The
memory card should slightly lock in place.
REMOVING MEMORY CARDS
¾ Do not remove the memory card while it is accessed. This
could result in loss of data.
1. To remove the card press lightly onto the upper edge until it
ejects.
2. Pull the card out without touching the contacts.
3. Store the memory card in the packing or in another safe location.
¾ Memory cards are very fragile. Take care not to dirty the
contacts and not to force the card.
GETTING STARTED
25
ACCESSING MEMORY CARDS
Memory cards are normally shown as Storage Cards in the
Windows Explorer.
You can access the memory card like a normal drive and store,
rename or delete files.
¾ The Pocket PC only supports memory cards in the FAT16/32 file
format. If you insert a card prepared with a different format
(e.g. in cameras, MP3 players), your Pocket PC may not recognize it and will ask you to format it again.
Warning: Formatting the memory card irretrievably wipes out
all data.
¾ Likewise you cannot just copy files onto the memory card. In
some cases they must be converted by the Microsoft®
ActiveSync® program.
DATA EXCHANGE VIA CARD READER
You can transfer or synchronise data via ActiveSync®. This is also
the correct method, in particular, if files are to be transferred that
must be converted into a Pocket PC-readable format.
However, if you wish to copy large quantities of data (MP3 files,
navigation maps) to the memory card, these can also be stored
directly to the memory card.
Many computers already have memory card devices. Insert the
card in this and copy the data directly to the card.
Because of the direct access significantly faster transfer will be
achieved.
26
ENGLISH
RESETTING THE POCKET PC
There are two options for resetting the Pocket PC.
SOFT-RESET
This option restarts the Pocket PC, without reinstallation being
necessary. A soft-reset is often used in order to reorganize the
memory. In doing so all programs that are running are interrupted and the working memory is reinitialized.
Choose this option if your Pocket PC is not responding or working
properly.
Perform the soft-reset as follows:
1. If possible save the files that your Pocket PC has just been
processing.
2. Press the tip of the stylus into the soft-reset switch opening.
After a few seconds the Pocket PC displays the start screen.
Your configuration and your saved files will not be deleted.
HARD-RESET
Warning: A hard-reset deletes all data on your Pocket PC and
causes a new initial installation.
It is not necessary to install the software on your synchronisation
computer again, however.
Perform the hard-reset as follows:
1. If possible save all the files needed from your Pocket PC. To
do this use the programs bundled with the Pocket PC (see
online help or the manual on CD).
2. Hold down the On/Off switch and carry out a soft-reset as described above.
GETTING STARTED
27
28
ENGLISH
NAVIGATION
SAFETY INSTRUCTIONS FOR NAVIGATION
The bundled product CD contains a comprehensive instruction manual.
TIPS FOR NAVIGATION
¾ Do not manipulate the navigation system while driving to
protect yourself and others from accidents!
¾ In the event that you do not understand the voice instruction or
if you are in any doubt about what to do at the next intersection,
then the map or arrow display will provide you with a quick orientation. Only look at the display when you are in a safe driving situation!
¾ Attention: The road layout and driving rules take precedence
over the instructions of the navigation system. Only follow the instructions when circumstances and driving rules permit it! The navigation system will guide you to your destination even when you
have to deviate from your planned route.
¾ The direction statements of the navigation system given do not
release the driver of the vehicle from his or her duty of care or
personal responsibility.
¾ Plan routes before you leave. If you want to plan a new route
whilst on the road stop driving.
¾ In order to receive the GPS signal correctly, metal objects may
not hinder reception. Attach the Pocket PC onto the inside of the
windscreen or near the windscreen with the sucker. Try out different positions in your vehicle in order to find the best reception.
NAVIGATION
29
NOTES FOR USE IN A VEHICLE
¾ When installing the car docking station take care, that the position of the docking station does not pose a safety risk while driving or in case of accidents.
¾ Take care that the cable does not impede any safety components.
¾ Do not mount the docking station within the operating range of
any airbags.
¾ Check the secure adherence of the suction cup at regular intervals.
¾ The power plug will consume power, even if no device is connected. Remove it when not in use to avoid draining the battery.
¾ Check all safety equipment in your car after installation.
¾ The display of your Pocket PC may show “light reflexions”. Please
take care of not being “blinded” during operation.
ADDITIONAL NOTES FOR USE ON A BICYCLE OR A MOTORCYCLE
¾ Pay attention during installation that the ability to steer is not
impaired.
¾ Do not cover any instruments during installation.
30
ENGLISH
GPS (GLOBAL POSITIONING SYSTEM)
GPS is a satellite-backed system for determining your position.
With the help of 24 satellites revolving around the earth, it is possible to determine your position on earth with the accuracy of a
few meters. The satellite signals are received by the antenna of
the built-in GPS receiver, which must have a "line of sight" to at
least 4 of these.
¾ Note: By limited line of sight (e.g. in tunnels, between
houses, in woods or also in vehicles with metal-coated windows) it is not possible to determine the position. The satellite
reception however automatically picks up again as soon as
the obstacle has been passed and there line of sight is reestablished again.
The GPS receiver consumes additional power. This is especially of
concern, when running on batteries. To conserve power do not
turn on the GPS receiver unnecessarily. Therefore, also shut down
the navigation software, if it is not needed, or if satellite reception
is not possible over an extended period of time.
However, you can switch the Pocket PC off by means of the
On/Off switch during a brief interruption to your journey. A renewed Start will be activated by pressing the same switch. The
GPS receiver will also be activated at the same time, if navigation
software is still active. It can take a short time for the position to
be brought up to date again, according to the situation for reception.
¾ Note: Please pay attention that your Pocket PC has been preset so that is does not switch off automatically after a few
minutes in the case of GPS reception in battery operation.
You can change and extend this presetting under
Start/Settings/System/ Medion Utility/GPS.
¾ If the GPS receiver has not been active for more than 4
hours, it must orientate itself again. This process may take a
while.
NAVIGATION
31
CONTENTS OF THE NAVIGATION CDS
According to the equipment several discs are delivered with your
Pocket PC. Contents of the navigation CDs:
The CD “MapExport ” contains basic maps as well as the
MapExport programme which is required to compose your own
maps. It will be installed on your computer.
The CDs with the pre-exported maps contain already composed
maps which can be copied through the explorer on a memory
card. These maps are available as you insert the memory card. In
the folder “Quick installation” you will find the file MedionNavigator.cab. If you copy this file to your Pocket PC memory card
and execute it from there, the navigation programme will be installed on your Pocket PC. This file is already installed on the memory card when shipping. There is no need to install it again.
MEMORY CARD QUICK INSTALLATION
¾ We recommend that you do execute a full Initial Installation (see page 16 and later) in order to be able to access additional functions of the Pocket PC.
¾ The following installation limits the Navigation to the area
which is pre-installed on your memory card.
1. Read and adhere to the safety instructions on p. 2 and following and p. 23 and following.
2. Install the components of the navigation system in your car.
Follow the instruction on p. 36.
3. Press the On/Off button to start your Pocket PC. If the instructions of Step 1 (p. 16) have not yet been executed, then
do it now. The battery of the Pocket PC is charged through
the power circuit of the car.
¾ Should the memory card not be inserted in the Pocket PC,
then insert it into the slot.
32
ENGLISH
1. Start File Explorer :
n
p
o
2. Switch to the memory card:
n
o
p
3. Install the navigation program by clicking onto the program
Medion-Navigator. Then the symbol will appear in the program folder:
n
o
4. The navigation software is now installed and can be used as
described on page 38.
NAVIGATION
33
SOFTWARE INSTALLATION ON YOUR PC
In order to be able to deploy self-defined cards on your Pocket PC
you must install the corresponding navigation software on your PC:
1. Before installing the navigation software ensure, that
ActiveSync® is installed, that the Pocket PC is placed in the
docking station and that a connection is established (see
page 22).
2. Place the CD-ROM with the navigation software
(MapExport) in your CD drive. The installation will start
automatically.
3. Follow the program instructions.
4. When the installation of the navigation software Map-Export
on your PC is completed, then the program will attempt to install the software onto your Pocket PC. If you have already
performed the installation manually (Memory card quick installlation, page 32), cancel this step.
34
ENGLISH
MOUNTING THE NAVIGATION SET ON A BICYCLE
q
p
o
n
1. Attach the bicycle support (o) onto your handlebar, by pulling it
up over the handlebar from below and pushing one of the supplied rubber rings (n) between the bicycle support and the handlebar. The flat site of the support points in your direction. As the
material is elastic, you can carefully bend open the support, lay it
around the handlebar and push it together again.
2. Position the holder for the Pocket PC (q) on the bicycle holder
(o) as illustrated above. Push the holder for the Pocket PC
downward, until it clicks in audibly. Please note that the support
can be inserted in one direction only.
3. Fix the complete holding device with the supplied screw (p) and
tighten it firmly by hand. Use the supplied washer depending on
the thickness of the handlebar.
Installation for
thin handlebars
Installation for thick
handlebars
4. Now insert the Pocket PC into the holder.
¾
Note: After assembly, protect your Pocket PC from dust and dirt
using the storage pocket with transparent window. The storage
pocket does not protect against rain or moisture. Take care that
the Pocket PC does not exposed to moisture. This may damage
the electronic parts.
NAVIGATION
35
MOUNTING THE NAVIGATION SET IN A CAR
¾ Attention! Only fix the holder for the pocket PC to the windscreen, if it does not impede the view. Should this not be possible, then mount the holder with the enclosed suction plate
in any way that will allow peril-free and safe operation.
INSTALLATION OF THE HOLDER OF THE POCKET PC
¾ Hint: If you want to fix the holder to the wind screen, then
you can skip steps 1 and 2.
1. Remove the protective foil from the sticky side of the suction
plate.
2. Fix the suction plate to a suitable location on the dashboard. Take
care, that the surface of the dashboard is clean and press the suction plate strongly onto the surface.
¾ To obtain a strong and secure hold the suction plate should
not be used for 24 hours.
Suction head
Car holder
Suction plate
Flexible neck
(similar picture)
36
ENGLISH
3. Mount the car holder to the flexible neck. Note the labels on
the flexible neck. The arrow labled close must point in the direction of the fixture. The connection closes with a noticeable
clicking sound.
4. Place the holder with the suction head onto the suction plate
(or directly onto the wind screen) and press the lever on the
suction head downwards. The suction head will stick itself
firmly to the suction plate.
5. Place the Pocket PC carefully into the car holder and close
the two brackets firmly, so that the Pocket PC is held securely.
AERIAL ORIENTATION
The aerial must have unrestricted access to the sky to receive
GPS satellite signals. Orient the aerial as horizontally as possible
for this reason. Try out aerial and installation possibilities in the
vehicle in the case of inadequate reception.
¾ Attention: Do not open out the aerial further than 180°.
NAVIGATION
37
CONNECTING POCKET PC IN THE CAR
Power adapter
(similar picture)
1. Plug the jack of the connection cable into the corresponding receptor at the bottom of your Pocket PC (p. 12).
2. Insert the power adapter now into the cigarette lighter socket
and ensure, that it will not lose contact while driving. This
could cause a malfunction.
¾ Hint: Remove the power adapter from the cigarette lighter
socket when ending a trip or when parking the car for a extended
period of time. Otherwise the car battery could be drained.
STARTING NAVIGATION
1. Switch on the Pocket PC with the On/Off button at the left side
of the device.
2. Start the Medion-Navigator program in the program directory
of your Pocket PC.
3. As soon as the GPS symbol changes from
to
or
(the number indicates how many satellites are received), the initialization is completed and you can
start to drive.
¾ Hint: The GPS-receiver will require some minutes for initialization when deployed for the first time. Even when GPS signal reception is indicated the navigation could be imprecise. In all future instances it will take about 30-60 seconds until a correct
GPS-signal is available.
4. Click on Enter a destination to specify your destination. In order to obtain detailed information about how to use the program
click on the Help button.
38
ENGLISH
FAQ
Where can I find more information on the Pocket PC.
Detailed operating instructions for navigation (optional)
and operation of the Pocket PC programs can be found on
the corresponding CDs, which accompany your Pocket PC.
For additional assistance use the extensive help functions
that are available at the touch of a button (usually F1 on your
PC) or by typing the question mark (on the Pocket PC). These
help options will be made available to you when you use the
computer or the Pocket PC.
Useful notes and additional help can be obtained from the
Internet at www.pocketpc.com or from corresponding
forums.
What do I need the accompanying CDs for?
The Companion CD contains:
-
ActiveSync® for synchronisation.
-
The information management program Outlook® and
other help programs from Microsoft®.
-
Additional programs (optional).
-
A comprehensive User manual for operating the
Pocket PC programs.
Contents of the navigation CDs:
The CD “MapExport ” contains basic maps as well as the
MapExport programme which is required to compose your
own maps. It will be installed on your computer.
The CDs with the pre-exported maps contain already
composed maps which can be copied through the explorer
on a memory card. These maps are available as you insert
the memory card. In the folder “Quick installation” you will
find the file Medion-Navigator.cab. If you copy this file to
your Pocket PC memory card and execute it from there, the
navigation programme will be installed on your Pocket PC.
This file is already installed on the memory card when
shipping. There is no need to install it again.
FAQ
39
The Pocket PC is no longer responding. What should I do?
Carry out a soft-reset (see page 27).
How can I adjust the lighting?
1. Manually.
2. On the Pocket PC under Start Ö Settings Ö System
Ö Backlight.
How can I find out information on the configuration of the
Pocket PC?
On the Pocket PC under Start Ö Settings Ö System .
What sort of processor must I choose if I want to install
software that has been written for various platforms?
Choose ARM.
40
ENGLISH
CUSTOMER SERVICE
FIRST-AID IN THE EVENT OF MALFUNCTION
GENERAL GUIDANCE
¾ The regular running of the Windows® programs “Defrag” and
“Scandisk” on the PC can remove sources of error and raise
system performance.
CHECK CONNECTIONS AND CABLES
Start with a careful visual check of all cable links. If the LCD’s are
not working, make sure that the power is reaching the computer
and all peripherals.
¾ Switch off the computer and check all cable links. If the computer is connected to peripherals, check also the plug connections of all cables. Do not arbitrarily swap the cables between
various units, even if they appear to be precisely the same.
The pin assignments of the cables are likely to be different.
Once you have ascertained that the power supply is not at
fault and all connections are intact, switch on the computer
again.
FAULTS AND POSSIBLE CAUSES
The Pocket PC does not respond anymore.
¾ Press the reset button. (see page 27).
The Pocket PC is recognized only as a guest by ActiveSync®.
¾ See information on page 22.
Elements have inadvertently been overwritten.
¾ In the Settings menu of the ActiveSync® program you can
define precisely which rules are to be applied during synchronization.
Call up the program Help (by pressing F1) in order to see the
effects of the corresponding settings.
The Pocket PC shows that insufficient memory is available.
¾ Terminate any unnecessary programs in order to free-up sufficient memory space again. In addition under Start Ö Settings Ö Memory Ö Current programs terminate applications
that are no longer needed.
Remove unnecessary files. Check temporary Internet files.
Multimedia files (MP3, AVI, BMP etc.) can be very big. Check if
you still need these.
Once I have installed ActiveSync® I get error messages from a
maintenance program.
¾ In the temporary folder created by the system, the program
creates the WCESCOMM.LOG file which cannot be deleted. If
another program tries to do this a corresponding error message appears. The GPS-receiver cannot be initialised.
The GPS receiver cannot be initialized or found.
42
ENGLISH
If the GPS symbol
remains on the screen of the Pocket PC
despite correct installation, then this can be caused by the following:
¾ The GPS receiver is configured for one of the other connectors
and not for COM1 of the Pocket PC.
Solution:
1. Click on Settings in the Main Menu of the navigator.
2. Select GPS from the list in the window Settings.
3. Activate COM1 and observe the GPS symbol in the upper
right corner. As soon as this changes from
to
or
(the number indicates how many satellites are received), you have successfully activated the COM1 port.
4. Click on Save.
The GPS receiver does not start automatically.
Solution:
Should the GPS symbol
still be shown even after the
configuration of the COM1 port, then it could be that the integrated GPS receiver can not be startetd
1. Close the navigation program.
2. Check the GPS reception settings under Start – Settings –
System – GPS. It is recommended to use the automatic
start when accessing COM1. Restart the navigation program.
or
The GPS symbol
played after a short while.
should now be dis-
The GPS-receiver is blocked.
Solution:
Set the GPS receiver back to delivery status by clicking under
Start/Settings/System/Medion Utility/GPS at the resetting control
button. The GPS Receiver will have to adjust itself to the satellite
situation again completely as in the case of the initial alignment,
following this reinitialization. This can take several minutes.
CUSTOMER SERVICE
43
The display jitters / slow, sluggish response or the program aborts.
This may be due to a memory space problem. The navigation
software requires approximately 10-15 MB free main memory
space (for swap-out files, etc.). If this is no longer available, the
stated problems may arise. The Pocket PC may also go into energy-saving mode, which can lead to the memory card no longer
being correctly recognised.
Solution:
¾ Close down all programs.
¾ Delete unnecessary files (MP3, PDF etc.) or save them
externally.
¾ Start the navigation program again.
¾ Carry out a soft-reset (page 27).
ADDITIONAL SUPPORT
If the suggestions in the above section have not solved your problem, please contact our customer service hotline. However, before
you contact your Technology Center, please have the following information available:
However, before you contact your Technology Center, please have
the following information available:
How is your computer configured?
What additional peripherals do you use?
What messages, if any, appear on your screen?
What software were you using when the error occurred?
What steps have you already undertaken to solve the problem?
- Have you upgraded or removed drivers or hardware?
- Can you manually repeat the problem?
- If you have been given a customer number previously, please
give this number to the technician.
-
44
ENGLISH
WARRANTY
The receipt serves as proof of first purchase and should be kept in
a safe place. Your legal rights are not limited by these warranty conditions. It is required should you need to make use of the guarantee.
We guarantee that this equipment is in perfect working order.
Upon production of the receipt, the remaining period of guarantee
shall pass on from the original parts to the respective replacement
parts. If you hand in this equipment to make use of the guarantee, you must remove all programs, data and removable storage
media. Products which are sent without accessories will be replaced without accessories. The warranty obligation does not apply in the case of the problem being caused by an accident, a catastrophe, vandalism, misuse, incorrect use, ignoring the safety
and maintenance regulations, changes by software, viruses or
another piece of equipment or accessories or by other modifications not approved by ourselves. This limited guarantee declaration replaces all other guarantees of express or implied nature.
This includes the guarantee of saleability or the suitability for a
certain purpose but is not limited to this. In some countries the
exclusion of implied guarantees is not permissible upon principle.
In this case the validity of all express and implied guarantees is
limited to the guarantee period. Once this period has expired, all
guarantees become invalid. In some countries limiting the period
of validity for implied guarantees is not permitted, so that the
above limitation does not come into force. If you have any questions with regard to these guarantee conditions, please contact us.
CUSTOMER SERVICE
45
LIABILITY LIMITATIONS
The contents of this manual are subject to unannounced changes
caused by technical progress. Manufacturer and sales shall not be
responsible for any damages which have been caused as a result
of omissions or errors in the information provided in this manual.
Under no circumstances shall we be liable for any of the following:
1.
2.
3.
Claims made against you by third parties based on loss or damage.
Loss or damage to your blanks, recordings or data.
Economic follow-on damage (including lost profit or savings) or associated damage even in the case that we have been informed of the possibilities of this type of damage.
In some countries the exclusion or limitation of accompanying or followon damage is not legally accepted so that the above limitations do not
come into force.
COPYING THIS MANUAL
This document contains legally protected information. All rights
reserved. Copying in mechanical, electronic and any other form
without the written approval of the manufacturer is prohibited.
Copyright © 2004, All rights reserved. Microsoft®, MS-DOS®, and Windows are registered
trademarks of Microsoft Corporation in the U.S. and other countries. Pentium® is a registered
trademark of Intel Corporation. The names of actual companies and products mentioned
herein may be the trademarks of their respective owners. Information in this document is
subject to change without notice.
46
ENGLISH
END USER LICENSE AGREEMENT FOR MICROSOFT®
SOFTWARE (EULA)
EULA Regulations
•
You have acquired a device (“DEVICE”) that includes software licensed by MEDION from
Microsoft Licensing Inc. or its affiliates (“MS”). Those installed software products of MS
origin, as well as associated media, printed materials, and “online” or electronic documentation (“SOFTWARE”) are protected by international intellectual property laws and
treaties. The SOFTWARE is licensed, not sold. All rights reserved. SOFTWARE includes
software already installed on the DEVICE (“DEVICE Software”) and MS software contained on the CD-ROM disk (“Companion CD”).
•
IF YOU DO NOT AGREE TO THIS END USER LICENSE AGREEMENT (“EULA”), DO NOT
USE THE DEVICE OR COPY THE SOFTWARE. INSTEAD, PROMPTLY CONTACT MEDION
FOR INSTRUCTIONS ON RETURN OF THE UNUSED DEVICE(S) FOR A REFUND. ANY USE
OF THE SOFTWARE, INCLUDING BUT NOT LIMITED TO USE ON THE DEVICE, WILL
CONSTITUTE YOUR AGREEMENT TO THIS EULA (OR RATIFICATION OF ANY PREVIOUS
CONSENT).
GRANT OF SOFTWARE LICENSE. This EULA grants you the following license:
•
DEVICE Software. You may use the DEVICE Software as installed on the DEVICE.
•
COMPANION CD. A Companion CD is included with your DEVICE, and you may install
and use the Microsoft® ActiveSync® 3.7 component on one (1) or more computers to
exchange information with one (1) or more computing devices that contain a compatible
version of the Microsoft® Pocket PC Software 2002 operating system. For other software component(s) contained on the Companion CD, you may install and use such
components only in accordance with the terms of the printed or online end user license
agreement(s) provided with such component(s). In the absence of an end user license
agreement for particular component(s) of the Companion CD, you may install and use
only one (1) copy of such component(s) on the DEVICE or a single computer with which
you use the DEVICE.
•
Microsoft® Outlook® 2002. If Microsoft Outlook 2002 is included with your DEVICE,
the following terms apply to your use of Microsoft Outlook 2002: (i) regardless of the information contained in the “Software Installation and Use” section of the online EULA
you may install one (1) copy of Microsoft Outlook 2002 on one (1) computer to use, exchange data, share data, access and interact with the DEVICE, and (ii) the EULA for Microsoft Outlook 2002 is between MEDION and the end user – not between the PC manufacturer and end user.
•
Security Updates/Digital Rights Management. Content providers are using the
digital rights management technology contained in this SOFTWARE (“DRM”) to protect
the integrity of their content (“Secure Content”) so that their intellectual property, including copyright, in such content is not misappropriated. Portions of this SOFTWARE
and third party applications such as media players use DRM to play Secure Content
(“DRM Software”). If the DRM SOFTWARE’s security has been compromised, owners of
Secure Content (“Secure Content Owners”) may request that MS revoke the DRM
SOFTWARE’s right to copy, display and/or play Secure Content. Revocation does not alter the DRM SOFTWARE’s ability to play unprotected content. A list of revoked DRM
SOFTWARE is sent to your computer whenever you download a license for Secure Content from the Internet. You therefore agree that MS may, in conjunction with such license, also download revocation lists onto your computer on behalf of Secure Content
Owners. MS will not retrieve any personally identifiable information, or any other information, from your computer by downloading such revocation lists. Secure Content Owners may also require you to upgrade some of the DRM components in this SOFTWARE
(“DRM Upgrades”) before accessing their content. When you attempt to play such content, MS DRM SOFTWARE will notify you that a DRM Upgrade is required and then ask
for your consent before the DRM Upgrade is downloaded. Third party DRM Software
CUSTOMER SERVICE
47
may do the same. If you decline the upgrade, you will not be able to access content
that requires the DRM Upgrade; however, you will still be able to access unprotected
content and Secure Content that does not require the upgrade.
DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS.
•
Speech/Handwriting Recognition. If the SOFTWARE includes speech and/or handwriting recognition component(s), you should understand that speech and handwriting
recognition are inherently statistical processes and that errors can occur in the component’s recognition of your handwriting, and the final conversion into text. Neither
MEDION nor its suppliers shall be liable for any damages arising out of errors in the
speech and handwriting recognition process.
•
Limitations on Reverse Engineering, Decompilation and Disassembly. You may
not reverse engineer, decompile, or disassemble the SOFTWARE, except and only to the
extent that such activity is expressly permitted by applicable law notwithstanding this
limitation.
•
Single DEVICE. The DEVICE Software is licensed with the DEVICE as a single integrated product. The DEVICE Software installed in read only memory (“ROM”) of the
DEVICE may only be used as part of the DEVICE.
•
Single EULA. The package for the DEVICE may contain multiple versions of this EULA,
such as multiple translations and/or multiple media versions (e.g., in the user documentation and in the software). Even if you receive multiple versions of the EULA, you are
licensed to use only one (1) copy of the DEVICE Software.
•
NO RENTAL. Except if specifically authorized by MEDION for leased hardware, you
may not rent, lease, or lend the SOFTWARE.
APPROVED ADDITIONAL TEXT IF THE DEVICE IS LEASED:
LEASED HARDWARE. In the event that you receive the DEVICE under the terms of a lease
from MEDION or MEDIONs third-party representative, the following additional terms shall
apply: (i) you may not transfer the SOFTWARE to another user as part of the transfer of the
DEVICE, whether or not a permanent transfer of the SOFTWARE with the DEVICE is otherwise
allowed in this EULA; (ii) your rights with respect to any SOFTWARE upgrades shall be as
determined by the lease you signed for the DEVICE; and (iii) you may not use the SOFTWARE
after your lease terminates, unless you purchase the DEVICE from MEDION .]
•
Software Transfer. You may permanently transfer all of your rights under this EULA
only as part of a sale or transfer of the DEVICE, provided you retain no copies, you
transfer all of the SOFTWARE (including all component parts, the media and printed materials, any upgrades, this EULA and, if applicable, the Certificate(s) of Authenticity), and
the recipient agrees to the terms of this EULA. If the SOFTWARE is an upgrade, any
transfer must include all prior versions of the SOFTWARE.
•
Termination. Without prejudice to any other rights, MEDION or MS may terminate
this EULA if you fail to comply with the terms and conditions of this EULA. In such
event, you must destroy all copies of the SOFTWARE and all of its component parts.
UPGRADES AND RECOVERY MEDIA.
•
DEVICE Software. If the DEVICE Software is provided by MEDION separate from the
DEVICE on media such as a ROM chip, CD ROM disk(s) or via web download or other
means, and is labeled “For Upgrade Purposes Only” you may install one (1) copy of such
DEVICE Software onto the DEVICE as a replacement copy for the existing DEVICE Software, and use it in accordance with this EULA.
•
COMPANION CD. If any software component(s) is provided by MEDION separate from
the DEVICE on CD ROM disk(s) or via web download or other means, and labeled “For
Upgrade Purposes Only”, you may (i) install and use one (1) copy of such component(s)
on the computer(s) you use to exchange data with the DEVICE as a replacement copy
for the existing Companion CD component(s).
48
ENGLISH
COPYRIGHT.
All title and intellectual property rights in and to the SOFTWARE (including but not limited to any
images, photographs, animations, video, audio, music, text and “applets,” incorporated into the
SOFTWARE), the accompanying printed materials, and any copies of the SOFTWARE, are owned
by MS or its suppliers (including Microsoft Corporation). You may not copy the printed materials
accompanying the SOFTWARE. All title and intellectual property rights in and to the content
which may be accessed through use of the SOFTWARE is the property of the respective content
owner and may be protected by applicable copyright or other intellectual property laws and
treaties. This EULA grants you no rights to use such content. All rights not specifically granted
under this EULA are reserved by MS and its suppliers (including Microsoft Corporation).
EXPORT RESTRICTIONS.
You acknowledge that SOFTWARE is subject to U.S. export jurisdiction. You agree to comply
with all applicable international and national laws that apply to the SOFTWARE, including the
U.S. Export Administration Regulations, as well as end-user, end-use and destination restrictions issued by U.S. and other governments. For additional information, see
http://www.microsoft.com/exporting/.
PRODUCT SUPPORT.
Product support for the SOFTWARE is not provided by MS, its parent corporation, Microsoft
Corporation, or their affiliates or subsidiaries. For product support, please refer to MEDION
support number provided in the documentation for the DEVICE. Should you have any questions concerning this EULA, or if you desire to contact MEDION for any other reason, please
refer to the address provided in the documentation for the DEVICE.
NO LIABILITY FOR CERTAIN DAMAGES.
EXCEPT AS PROHIBITED BY LAW, MS SHALL HAVE NO LIABILITY FOR ANY INDIRECT,
SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING FROM OR IN CONNECTION
WITH THE USE OR PERFORMANCE OF THE SOFTWARE. THIS LIMITATION SHALL APPLY EVEN
IF ANY REMEDY FAILS OF ITS ESSENTIAL PURPOSE.
FOR APPLICABLE LIMITED WARRANTIES AND SPECIAL PROVISIONS PERTAINING TO
YOUR PARTICULAR JURISDICTION, PLEASE REFER TO YOUR WARRANTY BOOKLET
INCLUDED WITH THIS PACKAGE OR PROVIDED WITH THE SOFTWARE PRINTED
MATERIALS.
CUSTOMER SERVICE
49
50
ENGLISH
INDEX
A
F
ActiveSync® -Connector .........12
Aerial Orientation ..................37
Ambient temperature ...............2
Audience ................................6
FAQ..................................... 39
Faults and Possible Causes ..... 42
First-Aid............................... 41
G
B
Getting Started....................... 9
GPS..................................... 31
GPS
(Global Positioning System) 31
GPS antenna ........................ 11
Back Components..................11
Battery Charge Indicator ........11
Bottom Components ..............12
C
H
Cabling ..................................3
Card reader ..........................26
Care of the Display ..................5
Charge Battery......................17
Charge the Battery of the
Pocket PC ..........................17
Cleaners.................................4
Connecting Pocket PC and
GPS-Receiver.....................38
Connecting Pocket PC in
the car ..............................38
Connecting to the computer....23
Connector
Power connector on
Pocket PC......................15
Contents of the Navigation CD 32
Copyright .............................46
Customer Service ..................41
Hard-Reset........................... 27
Headphone........................... 13
Hotline ................................ 44
I
Initial Set-up of the Pocket PC 16
Installing Microsoft®
ActiveSync® ...................... 22
Installing Microsoft® Outlook .. 21
Installing the Software........... 20
Introduction ........................... 6
IR Port................................. 14
L
Lanyard eyelet...................... 13
Left Components................... 13
D
M
Data exchange ......................26
Data Security ..........................2
Defragmentation ...................41
Maintenance........................... 4
Malfunction .......................... 41
Memory Card Quick
Installation........................ 32
Microphone .......................... 10
Mounting the Navigation Set
in a Car ............................ 36
E
EMC.......................................3
INDEX
51
Mounting the Navigation Set
on a Bicycle .......................35
N
Navigation ............................29
Safety instructions.............29
Tips.................................29
Navigationpad .......................10
O
Operating Environment ............2
T
P
Power ....................................3
Connector on Pocket PC .....15
Power supply ..........................3
PPC Connector ......................15
Text recognition.................... 42
Top Components................... 14
Touch Screen ....................... 10
Transport............................... 5
U
Q
Quality ...................................6
R
Reset ...................................13
Reset Button.........................13
Resetting the Pocket PC .........27
S
Safety and Maintenance ...........1
Safety Instructions
Cabling ............................. 3
Connection ........................ 3
Power supply ..................... 3
Power ............................... 3
Battery Operation............... 4
52
Scandisk .............................. 41
SD/MMC Slot ........................ 14
Soft-Reset............................ 27
Software Installation ............. 34
Starting Navigation ............... 38
Storage ............................... 42
Stylus.................................. 14
Supplied Items ....................... 7
Synchronization between
Pocket PC and PC............... 24
System performance ............. 41
Upgrading/Retrofitting ............. 2
USB-Docking Station ............. 15
Using the Pocket PC .............. 23
V
Views .................................. 10
Back components.............. 11
Bottem components .......... 12
Front components ............. 10
Left components ............... 13
Top components ............... 14
W
Warranty ............................. 45
Working with Memory Cards... 25
ENGLISH
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising