Metra Electronics 95-7323 Installation instructions

Add to my manuals
8 Pages

advertisement

Metra Electronics 95-7323 Installation instructions | Manualzz

INSTALLATION INSTRUCTIONS FOR PART 95-7323

APPLICATIONS

Hyundai Entourage 2007-2008

Kia Sedona 2006-up

95-7323

KIT FEATURES

• Double DIN radio provision

• Stacked ISO units provision

KIT COMPONENTS

A) • Double DIN Trim Plate B) • Double DIN Brackets

A B

WIRING & ANTENNA CONNECTIONS (Sold Separately)

Wiring Harness:

• 70-1004 Hyundai/Kia harness 2004-up

Antenna Adapter:

• Not Required

TOOLS REQUIRED

Panel Removal Tool • Phillips Screwdriver • Small Flat Blade Screwdriver

METRA. THE WORLD’S BEST KITS.™

1-800-221-0932 metraonline.com

© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION

Kit Assembly

– Double DIN radio provision

95-7323

Table of Contents

Dash Disassembly

– Hyundai Entourage 2007-2008

– Kia Sedona 2006-up

– Stacked ISO units head provision

Caution

Metra recommends disconnecting the negative battery terminal before beginning any installation. All accessories, switches, and especially air bag indicator lights must be plugged in before reconnecting the battery or cycling the ignition.

*NOTE: Refer also to the instructions included with the aftermarket radio.

3

4

5

K NOWLEDGE IS P OWER

Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry.

Log onto www.installerinstitute.com or call

800-354-6782 for more information and take steps toward a better tomorrow.

Metra recommends MECP certified technicians

95-7323

Dash Disassembly

1. Unclip and remove panel surrounding shifter. (Figure A)

2. Remove (2) Phillips screws at bottom corners of panel surrounding radio.

(Figure B)

3. Unclip and remove entire panel surrounding radio including the clock and a/c vents. (Figure C)

4. Remove (4) Phillips screws securing radio.

5. Unplug and remove the radio.

Continue to kit assembly

(Figure A)

(Figure B)

3

(Figure C)

Kit Assembly 95-7323

Double DIN radio provision

1. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or

AXXESS. Re-connect the negative battery terminal and test the unit for proper operation.

2. Snap the Double DIN brackets to the inside edge of the Double DIN trim plate. (Figure A)

3. Slide the Double DIN radio into the bracket/trim plate assembly and secure the radio to the assembly using the screws supplied with the radio.

(Figure B)

4. Reassemble dash in reverse order of disassembly.

(Figure A)

(Figure B)

4

Kit Assembly 95-7323

Stacked ISO units head provision

1. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or

AXXESS. Re-connect the negative battery terminal and test the unit for proper operation.

2. Snap the Double DIN brackets to the inside edge of the Double DIN trim plate. (Figure A)

3. Slide the stacked ISO units into the bracket/radio housing assembly and secure the units to the kit using the screws supplied with the units.

(Figure B)

4. Reassemble dash in reverse order

of disassembly.

(Figure A)

(Figure B)

5

Notes

Notes

INSTALLATION INSTRUCTIONS FOR PART 95-7323

METRA. THE WORLD’S BEST KITS.™

1-800-221-0932 metraonline.com

© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Questions and Answers

What are the applications of Metra Electronics 95-7323?
It is designed for Hyundai Entourage 2007-2008 and Kia Sedona 2006 and later models.
What are the main features of the kit?
The kit includes a Double DIN radio provision and a Stacked ISO units provision.
What tools are needed for the installation?
The installation requires a Panel Removal Tool, a Phillips Screwdriver, and a Small Flat Blade Screwdriver.
How to disassemble the dashboard for Hyundai Entourage 2007-2008?
1. Unclip and remove the panel surrounding the shifter. 2. Remove two Phillips screws at the bottom corners of the panel surrounding the radio. 3. Unclip and remove the entire panel surrounding the radio, including the clock and A/C vents. 4. Remove four Phillips screws securing the radio. 5. Unplug and remove the radio.
How to assemble the kit for Double DIN radio provision?
1. Snap the Double DIN brackets to the inside edge of the Double DIN trim plate. 2. Slide the Double DIN radio into the bracket/trim plate assembly and secure it using the screws supplied with the radio. 3. Reassemble the dash in reverse order of disassembly.
How to assemble the kit for Stacked ISO units provision?
1. Snap the Double DIN brackets to the inside edge of the Double DIN trim plate. 2. Slide the stacked ISO units into the bracket/radio housing assembly and secure them using the screws supplied with the units. 3. Reassemble the dash in reverse order of disassembly.

Related manuals

Download PDF

advertisement