- No category
advertisement
OSMO
User Manual
V1.4
2017.02
Searching for Keywords
Search for keywords such as “battery” and “install” to find a topic. If you are using Adobe
Acrobat Reader to read this document, press Ctrl+F (Windows) or Command+F (Mac) to begin a search.
Navigating to a Topic
View a complete list of topics in the table of contents. Click on a topic to navigate to that section.
Using this Manual
Legend
Important Tips
Install the DJI GO App
Search for ‘DJI GO’ on the App Store or Google Play and install the app on your mobile device.
DJI GO supports iOS 8.0 (or later) or Android 4.1.2 (or later).
2
©
2017 DJI All Rights Reserved.
Contents
Removing the Mobile Device Holder
Compatibility with the Zenmuse X3 for the Inspire 1
©
2017 DJI All Rights Reserved.
3
Introduction
The Osmo is a 3-axis handheld gimbal and camera that can capture 12MP still photos and
4K video with onboard or external sound recording. Its light and ergonomic design with buttons at your fingertips form a powerful and personal one-handed filming device. The DJI
GO app complements the Osmo with shooting modes such as timelapse, auto panorama, long exposure and slow motion.
Equipped with 3-axis stabilization and SmoothTrack technology, the gimbal compensates for natural arm movements and smooths out transitions. Finer operations can be done with the joystick, while instant positioning of the camera can be made directly with your other hand.
The camera tilts across a 170 degree range and has a pan rotation of 640 degrees.
The DJI Rosette Mount on the side of the handle allows your mobile device to be mounted as a live HD viewfinder, and supports external devices including vehicle mounts and tripods for specialized filming applications.
At a Glance:
[14]
[13]
[1]
[15]
[16]
[17]
[12]
[11]
[10]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[23]
[22]
[21]
[20]
[9]
[19]
[1] Tilt Motor
[2] Micro USB Port
[3] Pan Motor
[4] Pan Axis Lock
[5] Gimbal Securing Ring
[6] System Status Indicator
[7] Power Switch
[8] Record Button
4
©
2017 DJI All Rights Reserved.
[9] Mobile Device Holder
[10] Shutter Button
[11] Joystick
[12] Camera Status Indicator
[13] Roll Motor
[14] Camera
[15] Air Vents
[16] UV Filter
[18]
[17] Micro SD Card Slot
[18] Battery Cover
[19] Lanyard Hole
[20] DJI Rosette Mount
[21] Trigger
[22] External Microphone Input
[23] Built-in Microphone
Getting Started
Intelligent Battery
The 980 mAh Intelligent Battery can power the Osmo for about 65 minutes.
Intelligent Battery Functions
Battery Balancing
Overcurrent Protection
Overcharge Protection
Over-discharge Protection
Short Circuit Protection
Temperature Control
Battery Level Display
Balances the voltage of each cell during charging.
Stops charging if the charging current is too large.
Stops charging if its voltage is too high.
Stops discharging if its voltage is too low.
Cuts the power supply if a short circuit is detected.
Stops charging if the core temperature falls below 59°F (15°C) or exceeds 104°F (40°C).
The battery level is displayed in the DJI GO app.
Battery Specifications
Model
Type
Capacity
Energy
Voltage
Charging Temperature
Operating Temperature
HB01-522365
LiPo
980 mAh
10.8 Wh
11.1 V
59° to 104° F (15° to 40° C)
14° to 122° F (-10° to 50° C)
Be sure to fully charge the Intelligent Battery for the first time to activate it.
Read the user manual, Intelligent Battery Safety Guidelines before use. The user takes full responsibility for all operations and usage.
Charging the Battery
Connect the battery charger to a power outlet using the provided cable.
Place the battery into the battery charger. It will take approximately 90 minutes for the battery to be fully charged, refer to the "Status LED Indicator Descriptions" section below for more information about the Status LED Indicator's blinking patterns.
©
2017 DJI All Rights Reserved.
5
OSMO User Manual
Status LED Indicator Descriptions
Status LED Indicator
— Solid Yellow
Descriptions
No battery detected
......
Blinking Green
(within a certain time)
— Solid Green
— Solid Red
Blinks once
Blinks twice
< 25%
25% to 49%
Blinks three times 50% to 74%
Blinks four times 75% to 99%
Fully charged
Charger error, check the connection to the Battery Charger
Battery Charger Specifications
Model
Input
Output
OS1C11
100-240 V, 50/60 Hz
12.6/13.2 V, 0.8 A
Only charge the battery with the provided battery charger. DJI takes no responsibility for accidents caused by the use of non-DJI battery chargers.
Remove the battery from the charger unless it is charging to prevent battery discharging.
Inserting the Battery
Slide the locking switch at the base of the Osmo to open the battery cover. Insert the battery and lock the battery cover.
Removing the Battery
Slide the locking switch at the base of the Osmo to open the battery cover. Push the red safety hook away from the battery to let it pop up, and then remove the battery.
6
©
2017 DJI All Rights Reserved.
Mounting your Mobile Device
1. Unfold the two arms on the mobile device holder.
2. Adjust the pads to the desired position.
OSMO User Manual
3. Place one end of your mobile device into the arms.
4. Extend the arms so that your entire mobile device is seated in the mobile device holder.
5. Rotate your mobile device to the desired position.
©
2017 DJI All Rights Reserved.
7
OSMO User Manual
Removing the Mobile Device Holder
The mobile device holder can be removed by rotating the knob counterclockwise.
It is recommended to install the cap for the DJI Rosette Mount when it is not in use.
External Mounts
Different types of external mounts can be attached to the DJI Rosette Mount for unique applications.
Universal Mount
Used to mount external devices such as a microphone or flashlight.
Extension Rod
Good for taking group selfies, overhead shots or reaching into small spaces.
Tripod
For stationary shots that require steady footage.
Bike Mount
Used to mount the Osmo on a bicycle.
8
©
2017 DJI All Rights Reserved.
OSMO User Manual
Vehicle Mount
Triple suction cup mount makes it ideal for mounting on top of or on the rear window of moving vehicles.
Straight Extension Arm
Used to attach up to three other mounts at the same time.
Visit the official DJI Store (http://store.dji.com) to learn more.
Unlocking the Gimbal
To protect the gimbal, the three motor axes are locked in place. To unlock the gimbal:
1. Gently rotate the tilt motor until it can rotate freely. Similarly, rotate the roll motor.
Be sure to unlock the tilt motor before unlocking the roll motor to avoid damaging the camera lens.
Rotate the motors just enough to allow free motion.
2. Slide the Pan Axis Lock upwards to unlock the pan axis.
Pan Axis Lock
©
2017 DJI All Rights Reserved.
9
OSMO User Manual
You can choose to unlock the gimbal before or after the Osmo is turned on. It is recommended to unlock the gimbal before powering on the Osmo.
The Osmo will beep slowly if the gimbal is locked after it is turned on. This means the camera is working normally but the gimbal is shut off.
If you need to unlock the gimbal after it is turned on, you must rotate the pan motor after unlocking the tilt motor and pan motor to reactivate the gimbal.
Locking the Gimbal
Pull the pan axis lock down and rotate the pan axis to the locked position (until it cannot rotate any further), and then adjust the roll motor and tilt motor in order to lock them in place.
You can lock and unlock the gimbal while the Osmo is turned on. Quickly tap the trigger twice to reactivate the motors after they are unlocked.
Using the Osmo
Controls and Operations
The gimbal anticipates handle movement to smooth out pan and tilt transitions, and uses
SmoothTrack technology to reduce camera shakes from natural arm movements. Additionally, there are buttons on the front and back of the handle that allow for finer control over the gimbal and camera. All of the buttons and controls are described below.
[1] Power Switch
To turn on the Osmo, pull the power switch down and then release it.
Pulling the power switch again will cause the Osmo to go in or out of sleep mode.
To turn off the Osmo, pull the power switch down and hold for 1.5 seconds.
Power Switch
Hold the Osmo steady and upright while it is starting up.
10
©
2017 DJI All Rights Reserved.
OSMO User Manual
[2] Joystick
Vertical movement tilts the camera. Horizontal movement pans the camera.
[3] Shutter Button
Press this button to take photos based on your settings in the DJI GO app. Hold down shutter button to capture continuous photo (when using firmware v1.5.2.0 or higher).
[4] Record Button
Press this button once to start recording video, and again to stop recording.
Joystick
Record Button
Shutter Button
[5] Camera Status Indicator
Indicates the camera’s system status. Refer to the table below for details.
Camera Status Indicator
Blinking Pattern
LED Off
Blinks Green
Blinks Green slowly
Blinks Green for each shot
— Solid Green
Blinks Red slowly
Description
Camera is functioning normally.
Shooting photo.
Self-timer.
Burst shooting.
Firmware upgrade successful.
Recording video.
/ Blinks Red and Green alternately Upgrading firmware.
— Solid Red
×2 Blinks Red twice
Blinks Yellow
— Solid Yellow
Camera is not mounted on the Osmo properly /
Firmware upgrade failed or system error.
Camera error.
Micro SD card busy.
Micro SD card error.
©
2017 DJI All Rights Reserved.
11
OSMO User Manual
[6] System Status Indicator
Indicates the status of the Osmo. Refer to the table below for details.
System Status Indicator
System Status Indicator
Blinks Green quickly
Description
The Osmo is initializing / Exiting sleep mode.
Blinks Red slowly
Blinks Red quickly
— Solid Yellow
Low battery level warning.
Critical low battery level warning.
The trigger is tapped and the gimbal is in lock mode.
Non-DJI battery detected.
— Solid Red
Breathing Green (high battery level)
Breathing Red (low battery level)
The Osmo is in sleep mode.
[7] Trigger
Hold down the Trigger to enable Lock Mode. The camera will stay in its current position regardless of handle movement. The Osmo will return to SmoothTrack Mode once the
Trigger is released.
Quickly tap the Trigger twice to center the camera. When the Osmo is in Upright Mode and Underslung Mode, quickly tapping the Trigger three times will enter Selfie Mode.
[8] External Microphone Input
Connect a 3.5 mm external microphone to record high quality audio.
[9] Built-in Microphone
Records audio for general use. You can turn off the microphone in the DJI GO app.
12
©
2017 DJI All Rights Reserved.
OSMO User Manual
External
Microphone Input
Trigger
Built- in Microphone
The external microphone will override audio reception of the built-in microphone.
It is normal for the built-in microphone to pick up some noise from the gimbal motors.
[10] Key Combination
Restore Default Wi-Fi Settings: Hold down the Trigger and Shutter Button at the same time. Then, pull the power switch down until the System Status Indicator blinks green.
Release the power button before releasing the Trigger. The default SSID, password and frequency for the Wi-Fi connection will be restored.
Turn on/off the Osmo's Wi-Fi: Press and hold the trigger, then pull down the power switch, then release both power switch and trigger. Wi-Fi is off when the system status
LED blinks twice. Repeat to turn on Wi-Fi (when using firmware v1.5.2.0 or higher).
Operation Modes
Upright Mode
Upright Mode can be used without any user input. In this mode, quickly tap the trigger twice to center the camera.
Quickly tap the trigger three times and the camera will point at you, ready for a selfie.
©
2017 DJI All Rights Reserved.
13
OSMO User Manual
Underslung Mode
Holding the Osmo upside down will cause it to enter Underslung Mode, in which the camera can easily capture images from a lower position. Quickly tapping the trigger twice will center the camera.
Quickly tap the trigger three times and the camera will point at you, ready for a selfie.
Flashlight Mode
Rotate the Osmo forward 90 degrees to go from Upright Mode to Flashlight Mode. Quickly tapping the trigger twice will center the camera.
In Flashlight Mode, pushing the joystick up or down will allow the camera to tilt up or down, pushing the joystick left or right will not pan the camera.
14
©
2017 DJI All Rights Reserved.
OSMO User Manual
Portrait Mode
Rotate the Osmo 90 degrees to the left or right to go from Upright Mode to Portrait Mode.
Compatibility with the Zenmuse X3 for the Inspire 1
The Osmo is compatible with the Zenmuse X3 Gimbal and Camera that comes with the
Inspire 1. Be sure to upgrade the Zenmuse X3 with the firmware v1.5.0.30 (or above) before mounting it onto the Osmo handle.
DJI GO App
Watch a live HD video feed on your mobile screen through the DJI GO app. The app also allows you to configure camera and gimbal settings in just a few taps.
Download
Search ‘DJI GO’ on the App Store or Google Play and download the app to your mobile device.
Connecting to the DJI GO App
1. Turn on the Osmo. Hold the handle still and avoid touching the gimbal while the Osmo starts up.
©
2017 DJI All Rights Reserved.
15
OSMO User Manual
2. On your mobile device, connect to the ‘OSMO_XXXXXX’ Wi-Fi network and enter the default password 12341234. Then launch the DJI GO app.
Settings Wi-Fi
Enable Wi- Fi
Wi-Fi
OSMO_XXXXXX
CHOOSE A NETWORK...
Other...
Ask to Join Networks...
Known networks will be joined automatically. If no known networks are available, you will have to manually select a network.
i i i
3. If you are using the Osmo for the first time, follow the on-screen instructions to activate it.
You will need to log in to your DJI account through an Internet connection. Re-connect to the Osmo Wi-Fi network after the activation is complete.
4. Enter Camera View. You will see what the camera captures in real time if it is connected successfully.
There will be a tutorial on how to use your Osmo after entering the camera view.
Key Pages
1. Equipment
>
Camera
[1]
ISO: 100 1/25 f: 2.8 EV: 0 JPEG 453 89%
[2]
AE
[11]
[3]
[4]
[5]
[6]
16
©
2017 DJI All Rights Reserved.
00:00:00 | 01:25:45
[7]
[10]
[9]
[8]
OSMO User Manual
[1]
ISO: 100 1/25 f: 2.8 EV: 0 JPEG 453 89%
AE
Information Bar
Displays the camera parameters, current battery level, and Wi-Fi signal strength.
[2] / : Photo/Video Toggle
Slide to switch between photo and video mode.
[3] Photo/Video Settings
: Photo Modes
Single Shot
Normal, 5s or 10s delayed shot, HDR.
Multiple Shots
Burst shooting 3/5/7 frames, Auto Exposure Bracketing (AEB) 3/5 bracketed frames at
0.7EV Bias.
Panorama
Auto: The camera will rotate 360 degrees and render a panorama.
Selfie: The camera will point at you, pan 180 degrees and render a panorama.
Forward: The camera will rotate 180 degrees and render a panorama.
Interval Timer
5s, 10s or 30s intervals.
Timelapse
1) Choosing to store timelapse in ‘JPEG+Video’ format limits the minimum interval to 2 seconds. Disabling this option reduces the minimum interval to 1 second.
2) If the timelapse interval is 2 seconds or more, the camera will apply digital stabilization to the live HD video on your mobile device.
: Video Modes
Auto: Normal video based on your camera settings.
Slow Motion: Recorded at 1080p and 120fps.
Single video recordings are capped at 30 minutes to ensure video quality.
[4] : Shutter/Record Button
Shoots photos in photo mode and records video in video mode.
[5] : Camera Parameters
Choose the shooting mode, ISO, shutter speed and exposure value.
[6] : Playback
Tap to view photos and videos on the Micro SD card.
©
2017 DJI All Rights Reserved.
17
OSMO User Manual
[7] 00:00:00 | 01:25:45 : Recording Status Bar
Displays the current recording time, remaining recording time and microphone volume.
[8] : Settings
Camera Settings
Here you can select the output formats for photos, video recording and sound recording, and enable on-screen displays such as grids and the histogram. Some of these options are explained below.
• Record Audio
Enable this option if you want to record sound through the built-in microphone or an external microphone. The external microphone will override the built-in microphone.
• Video Caption
If you enable this option, a .srt file containing on-screen information will be created with the video file.
• Timelapse Format
Choosing ‘JPEG+Video’ will save the timelapse photos as well as the video.
• Anti-Flicker
Select the frequency that matches the current cycle in your country to prevent the flickering of lights.
• File Index Mode
If you select ‘Reset’, the camera will write the photo and video files starting from the smallest available index. If you select ‘Continuous’, the camera will continue the index from the last written file.
Gimbal Settings
• Profiles
Select the ‘Fast’, ‘Medium’ or ‘Slow’ profile depending on how responsive you want the gimbal to be. Alternatively, create a custom profile by selecting C1 or C2 and configuring the settings below.
• SmoothTrack Settings
The pan and tilt axes can be adjusted separately.
Speed: Determines how fast the gimbal will catch up with the translated pan/tilt handle movement.
Deadband: A larger deadband requires more pan/tilt handle movement to translate into gimbal motion.
Acceleration: Determines how closely the camera will follow the translated pan/tilt handle movement.
18
©
2017 DJI All Rights Reserved.
OSMO User Manual
• Joystick Settings
Smoothing: Controls the deceleration of the gimbal. A small value will cause the gimbal to stop abruptly.
Speed: Controls the movement speed of the tilt and pan axes when controlled by the joystick.
Control Direction: The Osmo's tilt and pan axis can be controlled simultaneously by setting joystick control direction to Free (when using firmware v1.5.2.0 or higher).
• Horizontal Calibration
You may have to calibrate the roll axis if the camera’s horizon level is not perfectly level by setting a positive or negative value.
• Auto Calibration
Reduces the drift caused by magnetic interference in the surroundings or human error. Hold the Osmo still and upright during the calibration.
• Reset Gimbal
Tap to reset the gimbal to the default settings.
General Settings
Here you can change the Wi-Fi password, clear the video cache, format your Micro SD card or view the current firmware version.
[9] : Gimbal Functions
Tap enable Lock Mode. Tap to recenter the camera. Tap to enter Selfie Mode.
[10] : Camera Quick Settings
A shortcut for changing the video resolution, photo format and photo color; select a predefined or custom white balance; choose style settings for adjusting sharpness, saturation and contrast. Adjust the microphone volume under Audio Volume Control.
Switch on Digital Zoom Control for fine control (when using firmware v1.5.2.0 or higher).
[11] : Home
Tap to navigate to the home screen.
Drag Focus
In Camera View, touch the screen and hold until a blue circle appears. Then, drag the circle to control the camera.
©
2017 DJI All Rights Reserved.
19
OSMO User Manual
2. Library
View, edit and share your masterpieces all in one place. The Library has a range of simple but powerful tools that let you edit your videos and photos before sharing them online, minutes after they are captured.
80% iPad
Original Footage
Video Photos
3:21
Create Movie
2015.09.07
2:02 0:11
2015.09.01
0:06 0:12
2015.08.27
0:31 0:51 0:17
2:31 3:51
Equipment
0:17
Library Explore Me
Once you login or register your DJI account, you will be able to conveniently upload and share your creations. The saved photos and videos can be uploaded to Skypixel
(www.skypixel.com) and shared on social networks such as Facebook, Twitter, WeChat,
Moments and Sina Weibo.
Video
All of your recorded video footage will appear in ‘Original Footage’. You can trim footage and save it to ‘Create Movie’. Then, select multiple clips to create a movie quickly with the built-in editing tools and templates.
Photos
Edit your photos by adjusting the parameters, editing the photo size, adding watermarks and applying filters.
3. Explore
Learn more about the latest DJI events, featured products and trending Skypixel uploads on the Explore page.
20
©
2017 DJI All Rights Reserved.
OSMO User Manual
4. Me
If you already have a DJI account, you will be able to participate in forum discussions, earn DJI Credit for the DJI Official Store, and share your masterpieces with the community.
80% iPad
Joyce
Me
DJI Forum
DJI Store
My Earnings
Settings
DJI Support
Equipment Library Explore Me
Upgrading the Firmware
Ensure that the battery has at least 50% power. It will take approximately 20 minutes to complete the upgrade. It is recommended to lock the gimbal and place the handle on a flat surface during the upgrade process.
The camera status indicator will blink green and red alternately during the upgrade process, and become solid green when the firmware upgrade is complete. If the Osmo upgrade is successful, you will hear a beeping pattern consisting of 1 long beep followed by 2 short beeps. If the upgrade is unsuccessful, the camera status indicator will become solid red and the Osmo will emit a fast beeping sound, in which case you should reattempt the upgrade.
Using the DJI GO App
Connect the Osmo to your mobile device and then launch the DJI GO app. You will be reminded if a new firmware upgrade is available. To start upgrading, connect your mobile device to the internet and follow the on-screen instructions.
A Micro SD card must be inserted into the Osmo for the upgrade to start.
©
2017 DJI All Rights Reserved.
21
Using a Micro SD Card
1. Download the latest firmware update package from the product page on the official DJI website.
2. Copy the .bin file to the root directory of your Micro SD card (ensure there is enough storage), and insert the card into the Micro SD card slot on the camera while the Osmo is powered off.
3. Power on the Osmo to begin upgrading.
Read the .txt file on the root directory of the Micro SD card to confirm the upgrade result.
Restart the Osmo and ensure the Camera Status Indicator is off for normal use.
Maintenance
When transporting the Osmo, keep it locked, in order to protect the gimbal, as shown below.
The Osmo is not water resistant. Keep it away from sand and dust during use. After use, it is recommended to wipe the Osmo down with a soft dry cloth. Never spray any cleaning liquids onto the Osmo.
22
©
2017 DJI All Rights Reserved.
Specifications
Handle
Dimensions
Weight (including battery)
Supported Mobile Device*
Gimbal
Model
Weight
Output Power (with camera)
Angular Vibration Range
Mount
Controllable Range
Mechanical Range
2.4×1.9×6.4 inches (61.8×48.2×161.5 mm)
201 g
Max Size: 6.2 (L)*3.1 (W) inches
Zenmuse X3
221 g
Static: 9 W; Dynamic: 11 W
±0.03°
Detachable
Tilt: -35° to +135°
Pan: ±320°
Roll: +30° to -30°
Tilt: -90° to +150°
Pan: ±330°
Roll: -50° to +90°
120°/s Max Controllable Speed
Camera
Model
Sensor
Lens
ISO Range
Electronic Shutter Speed
Max. Image Size
Still Photography Modes
X3 / FC350H
1/2.3" CMOS
Effective pixels: 12.40 M (Total pixels 12.76 M)
94° FOV 20 mm (35 mm format equivalent) f/2.8
Focus: 3.5 m (Suitable Range: 1.5 m to infinity)
100 – 3200 (video)
100 – 1600 (photo)
8 s – 1/8000 s (up to 30 s when camera is in M mode)
4000 × 3000 pixels
Single Shot
Photo Burst Mode: 3/5/7 shots
Auto Exposure Bracketing (AEB):
3/5 bracketed frames @ 0.7EV bias
Interval
Timelapse
Auto Panorama
Selfie Panorama
*Refer to www.dji.com for more information on Supported Mobile Device.
©
2017 DJI All Rights Reserved.
23
OSMO User Manual
Video Resolution
Video Recording Modes
Max. Video Bitrate
Supported File Systems
Photo Formats
Video Formats
Supported SD Cards
Operating Temperature
Audio Output
Wi-Fi Video Link
Operating Frequency
Max Transmission Distance
Transmitter Power (EIRP)
Intelligent Battery
Model
Type
Capacity
Energy
Voltage
Charging Temperature
Operating Temperature
Battery Charger
Model
Input
Output
24
©
2017 DJI All Rights Reserved.
UHD: 4K (4096×2160) 24/25p
4K (3840×2160) 24/25/30p
2.7K (2704×1520) 24/25/30p
FHD: 1920×1080 24/25/30/48/50/60/100p
HD: 1280×720 24/25/30/48/50/60p
Auto
Slow Motion
60 Mbps
FAT32 (≤ 32 GB) exFAT (> 32 GB)
JPEG, DNG (RAW)
MP4, MOV (H.264 / MPEG-4 AVC)
Micro SD
Max. Capacity: 64 GB
Class 10 or UHS-1
32° to 104° F (0° to 40° C)
48 kHz
AAC
2.412 – 2.462 GHz
5.180 – 5.805 GHz
82 feet (25 m)
2.4 GHz: 8 dBm
5 GHz: 12 dBm
HB01-522365
LiPo
980 mAh
10.8 Wh
11.1 V
59° to 104° F (15° to 40° C)
14° to 122° F (-10° to 50° C)
OS1C11
100 – 240 V, 50/60 Hz
12.6/13.2 V, 0.8 A
Troubleshooting
1. Why can’t I connect to the Osmo?
•
Check your mobile device’s Wi-Fi settings to make sure it is connected to the Osmo’s
Wi-Fi network.
•
If the Osmo’s Wi-Fi network does not appear in your phone’s Wi-Fi settings, make sure your mobile device is operating at either the 2.4GHz or 5.8GHz channel and try again.
•
If you still cannot connect to the Osmo even though your mobile device is connected to the Osmo’s Wi-Fi network, restart the Osmo and try again.
If the problem persists, reset the Osmo’s Wi-Fi network to its default settings by using the key combination and try again. (Key combination: Hold down the Trigger and Shutter Button at the same time. Then, pull the power switch down until the System Status Indicator blinks green. Release the power button before releasing the Trigger.)
Still can’t connect? You can contact our online support at www.dji.com/support to get more help.
2. Why doesn’t the gimbal work out of the box?
Ensure you have activated the Osmo by linking it to your DJI account. Connect your mobile device to the dedicated Osmo Wi-Fi network, launch the DJI GO app, and then follow the on-screen instructions to activate the device.
3. Why does the Osmo keep beeping after I turn it on?
The gimbal is locked. Rotate the tilt and roll axes until they can move freely. If the pan axis is locked, slide the Pan Axis Lock up to free the pan axis.
4. What should I do if the battery depletes while I am recording video?
Do not remove the Micro SD card from the camera. Recharge the battery or insert a new one into the handle. The Osmo will automatically recover the video file when it starts up.
5. How do I shoot amazing long exposure shots?
Long exposures can be produced by setting a slow shutter speed. In the DJI GO app, choose ‘S’ mode (Shutter Priority) or ‘M’ (Manual Mode) and adjust the shutter speed to the desired value. Make sure you hold the camera still for the entire shutter duration.
6. Can I close the DJI GO app or disconnect my mobile device while the Osmo is recording video?
Yes. The Osmo will continue recording video and still be able to capture photos, but you will lose the ability to preview the shots on your mobile device.
©
2017 DJI All Rights Reserved.
25
OSMO User Manual
7. The cameras for the Osmo and the Inspire 1 look similar. Are they interchangeable?
No. The mechanical structure of the Osmo’s camera is designed for hand held use. The
3-axis gimbal can be flattened and locked, and the position of the tilt motor is different.
However, the Inspire 1’s camera can be used with the Osmo after it is upgraded with the latest firmware (to be released soon).
26
©
2017 DJI All Rights Reserved.
This content is subject to change.
Download the latest version from www.dji.com/product/osmo
If you have any questions about this document, please contact DJI by sending a message to [email protected]
.
©
2017 DJI All Rights Reserved.
©
2017 DJI All Rights Reserved.
27
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 2 Using this Manual
- 2 Legend
- 2 Install the DJI GO App
- 4 Introduction
- 5 Getting Started
- 5 Intelligent Battery
- 7 Mounting your Mobile Device
- 8 Removing the Mobile Device Holder
- 8 External Mounts
- 9 Unlocking the Gimbal
- 10 Locking the Gimbal
- 10 Using the Osmo
- 10 Controls and Operations
- 13 Operation Modes
- 15 Compatibility with the Zenmuse X3 for the Inspire 1
- 15 DJI GO App
- 15 Download
- 15 Connecting to the DJI GO App
- 16 Key Pages
- 21 Upgrading the Firmware
- 21 Using the DJI GO App
- 22 Using a Micro SD Card
- 22 Maintenance
- 23 Specifications
- 25 Troubleshooting