ECU-3/-6 - Frankonia Group
EMC Test and Control Unit - ECU-3/-6
E
All-IN-ON
UNIT:
ECU-3/-6
Signal Generator, 9 kHz – 3/6 GHz
RF-Power Meter, 10 kHz – 6 GHz
Directional Couplers, 10 kHz – 6 GHz
EUT-monitoring
Control of up to four external RF-Power Amplifiers
Control of up to two external EMI-Receivers
RF-Relay Switching Unit
Special Features:
Conducted immunity tests according to IEC/EN 61000-4-6, 10 kHz – 230 MHz
BCI-tests according to ISO 11452-5 and MIL-STD 461, CS 114
Radiated immunity tests according to:
• IEC/EN 61000-4-3
• ISO 11452-2/3/4/5
• MIL-STD 461, RS 103
Automatic switching between up to four external power amplifiers and connected coupling units / antennas
Automatic switching between up to two EMI-receivers, spectrum analyzers and three different antennas
Easy integration into any control software by dll-driver
Integrated interlock safety system
9 // PAGE
EMC Test and Control Unit - ECU-3/-6
Description
The ECU-3/-6 is a central EMC test and control unit, which combines in just one compact box many major test components like signal generator,
power meter, directional couplers and relay switching unit, which are needed for EMC tests. That reduces the cabling work and possible cabling
mistakes to a minimum. Furthermore it includes general functions like EUT-monitoring and an interlock safety-system. With all the functions
described above, the ECU-3/-6 is a real all-rounder, which can be used for many different conducted and radiated immunity tests as well as
control unit to switch between EMI-receiver and spectrum analyzer and different measuring antennas without time consuming cabling work. It
allows to control and to switch automatically between up to four external amplifiers, all connected to the ECU-3/-6 and up to three different outputs
for antennas or coupling devices (CDNs, EM-coupling clamp, BCI-clamps). The integrated signal generator is available to cover the frequency range
from 9 kHz to 3 GHz or from 9 kHz to 6 GHz. Amplitude modulation is available with a modulation rate of 1 Hz to 30 kHz and a modulation depth
of 0 % to 90 %. Pulse modulation can be switched on with a repetition frequency of 0.1 Hz to 100 kHz and a duty cycle of 1 % - 99 %. In a word,
it includes all requirements according to present EMC standards and it is best prepared for possible future changes.
Technical specifications
ECU-3
ECU-6
Signal Generator
50 Ω, N male
Output
Output (Relay)
Frequency range
Frequency resolution
Output level range
3 x N male
4 x N male
9 kHz to 3 GHz
9 kHz to 6.5 GHz
0.1 Hz
0.001 Hz
-65 dBm to +10 dBm
-100 dBm to +13 dBm
Output level resolution
0.1 dB
Output level accuracy
±1 dB max.
Accuracy (frequency)
±5 ppm
±100 ppb
Harmonics
< -30 dBc
Non harmonics
< -55 dBc
Amplitude modulation
Modulation rate
Modulation depth
Modulation waveforms
1 Hz to 30 kHz; resolution 0.02 Hz
1 Hz to 20 kHz; resolution 0.1 Hz
0 to 90 %; resolution 1 %
0 to 90 %; resolution 1 %
sinusoidal, triangular, square
sinusoidal, triangular, square
> 50 dB
typ. 80 dB
0.1 Hz to 100 kHz
0.1 Hz to 100 kHz
1 % - 99 %; resolution 1 %
1 % - 99 %; resolution 1 %
---
300 Hz to 300 kHz
Pulse modulation
On/off ratio
Repetition frequency
Duty cycle
Frequency modulation
PAGE // 10
Modulation rate
EMC Test and Control Unit - ECU-3/-6
Technical specifications
ECU-3
ECU-6
7
9
RF-Power Meter
Number of channels
Frequency range
Measuring range
10 kHz - 500 MHz (channel 1,2,7)
10 kHz - 500 MHz (channel 1,2,9)
100 kHz - 6 GHz (channel 3,4,5,6)
100 kHz - 6 GHz (channel 3,4,5,6,7,8)
-60 dBm to +20 dBm (10 kHz ≤ f ≤ 4 GHz)
-45 dBm to +20 dBm (4 GHz < f ≤ 6 GHz)
Accuracy
Resolution
Max. input level
VSWR
± 1 dB (0.5 dB typical)
0.1 dB
+27 dBm (= 500 mW)
1.15
EUT-fail input
2 x TTL/CMOS compatible
Input resistance
2.2 kΩ
Level
TTL/CMOS compatible, optical decoupled
EUT-monitor input
Input voltage (2 x)
0 - 10 V
Resolution
2.5 mV
Input impedance
100 kΩ
USB-A
Multimeter (for EUT control)
Remote control
USB-B
Connection to computer
GPIB / IEEE488
Connection to computer
Ethernet / RJ45
option
Display
Displayed items
Frequency, Power levels Pforw., Prev. , modulation (4 lines x 16 characters)
RF-Relay Switching Unit
max. power up to 100 MHz
2000 W
max. power up to 600 MHz
1000 W
max. power up to 1 GHz
700 W
max. power up to 3 GHz
400W
max. power up to 6 GHz
300W
General data
Temperature range
0 to 40°C
Warm-up time
15 min.
Housing
Dimensions (W x H x D)
19"-Subrack or desktop case
449 mm x 177 mm x 580 mm
Weight
approx. 15 kg
AC input
100 - 240 VAC; 50/60 Hz
11 // PAGE
Antenna 1
AXL-80
Antenna 2
MAX-9
Radiated Immunity Testing acc. to
• IEC/EN 61000-4-3
• ISO 11452-2
• MIL-STD 461, RS 103
EFS-10/-100
Field Strength Meter
Diagram no. 3
Example of a test system setup with ECU-3/-6
EUT
GPIB
Immunity Software CR-LAB
Emission Software incl. cable
kit and rack installation
Fibre optic link
EMI Receiver
USB / LAN / GPIB
CDN
or EMCL
Conducted Immunity Testing acc. to
• IEC/EN 61000-4-6
BCI Testing acc. to
• ISO 11452-4
• MIL-STD 461, CS114
KAL
Coupling network
6dB-attenuator
FLL/FLH/FLG
Amplifier 4
FLL/FLH/FLG
Amplifier 3
FLL/FLH/FLG
Amplifier 2
FLL/FLH/FLG
Amplifier 1
Voltmeter IN
EMI Receiver 1
EMI Receiver 2
Antenna 3
Antenna 2
Antenna 1
2x EUT fail
2x Analog in
RF-Power Meter
Controller
Board
DC
1
USB / LAN / GPIB
DC
2
SP4T
PC
SPDT
Relay Switching
Unit
SP4T
ECU-3/-6
Signal
Genarator
3 GHz / 6 GHz
DC
3
SPDT
DC
4
PAGE // 12
EMC Test and Control Unit - ECU-3/-6
EMC Test and Control Unit - ECU-3/-6
Part Numbers
ECU-3
Compact EMC control unit, basic Instrument, 9 kHz - 3 GHz
ECU-6
Compact EMC control unit, basic Instrument, 9 kHz - 6 GHz
ECU-DC1A
Directional Coupler, 10 kHz -250 MHz, 30 dB, 100 W
ECU-DC1B
Directional Coupler, 10 kHz - 400 MHz, 30 dB, 100 W
ECU-DC1C
Directional Coupler, 10 kHz - 250 W, 30 dB, 500 W
ECU-DC2
Directional Coupler, 80 MHz - 1000 MHz, 50dB, 1500 W
ECU-DC3
Directional Coupler, 1 GHz- 4 GHz, 40 dB, 600 W
ECU-DC4
Directional Coupler, 2 GHz - 8 GHz, 40 dB, 600 W
ECU-KS2
Cable-set and GPIB-interface for immunity test systems with 2 amplifiers
ECU-KS3
Cable-set and GPIB-interface for immunity test systems with 3 amplifiers
ECU-KS4
Cable-set and GPIB-interface for immunity test systems with 4 amplifiers
ECU-LAN
Additional interface: LAN
ECU-OUT2
Switching between 2 outputs (antenna/load)
ECU-OUT3
Switching between 3 outputs (antenna/load)
ECU-PM1
RF-Power Meter / RF-milli-voltmeter, 10 kHz - 500 MHz, 1 channel
ECU-PM2
RF-Power Meter / RF-milli-voltmeter, 100 kHz - 6 GHz, 1 channel
ECU-REC1
Switching to emission path and connection of 1 measuring receiver / spectrum analyzer
ECU-REC2
Switching to emission path and connection of 2 measuring receivers / spectrum analyzers
ECU-RI
ECU-SW6
19"-Rack version
Standard software for testing acc. to IEC/EN 61000-4-6 in a system with ECU-3/-6
13 // PAGE
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement