Assembly Guide

R E N I A R T L A C I T P I L L E E M E R T X E E C N A R U D N E

THESE INSTRUCTIONS

INSTRUCTIONS SAVE

IMPORTANT SAFETY

800 Burton Blvd

Horizon Fitness before a warranty claim can be processed.

Fitness or register on line at www.horizonfitness.com,

TION vary from state to state.

ranty gives you specific legal rights, and your rights may parts and constitute fulfillment of warranty terms. This warmay sometimes be supplied as warranty replacement to As New Condition by Horizon Fitness or its vendors purchase. Parts and electronic components reconditioned tion charges prepaid, accompanied by sufficient proof of ucts must be received with all freight and other transportaproducts for which a warranty claim is made. These prod-

Horizon Fitness authorized service center must receive all the product at one of its authorized service centers. An limited to replacing or repairing, at Horizon Fitness’ option,

Fitness. Horizon Fitness’ obligation under this warranty is damages. All returns must be pre-authorized by Horizon shall not be responsible for incidental or consequential coloration of paint or plastic, or neglect. Horizon Fitness damage or failure due to accident, abuse, corrosion, disthe elliptical trainer as sold. The warranty does not apply to or accessories not originally intended or compatible with improper assembly or maintenance, or installation of parts

The warranty does not cover normal wear and tear, or defective part and is the sole remedy of the warranty.

or replacement of a defective frame, electronic component, transferable. This warranty is expressly limited to the repair

This warranty applies only to the original owner and is not

TIONS EXCLUSIONS AND LIMITA possession of the original owner.

original purchase, so long as the device remains in the the device for a period of one year from the date of the

Horizon Fitness shall cover the labor cost for the repair of possession of the original owner.

original purchase, so long as the device remains in the all original parts for a period of one year from the date of

Horizon Fitness warrants the electronic components and

ELECTRONICS & PARTS - 2 year workmanship and materials for the lifetime of the original

Horizon Fitness warrants the frame against defects in

FRAME - LIFETIME

LIMITED HOME USE WARRANTY www.horizonfitness.com

Ph: 1-888-993-3199 Fax: 1-608-842-1660

DeForest, Wisconsin 53532

LABOR- 1 year owner.

Y our warranty card must be completed and sent to Horizon

WARRANTY REGISTRA www.horizonfitness.com

or

Horizon Fitness @ 1-888-993-3199 please contact:

THE STORE, DO NOT RETURN TO

In the event that a problem should arise, o

. If at all possiour Elliptical after each use.

use sealed bearings throughout our elliptical trainerso lubrication is

E NC NA TE IN

We

MA perspiration off the elliptical trainer parts.

should be in a attractive setting their Elliptical Trainers facing the TV or a picture window

Trainer is designed to use minimal floor space. Many people will place

Y our Horizon Fitness Elliptical T

Fitness Elliptical Trainer in a comfortable and inviting room. Y ble, avoid putting your Elliptical Trainer in a unfinished basement. T

use the highest

NS IO ST UE Q CT DU RO P ON MM CO

Are the sounds my Elliptical Trainer makes normal?

use belt drives and friction free magnetic resistance. We grade bearings and belts to minimize noise. However, because the mechanical noises. Unlike older, louder technologies, there are no fans,

Our elliptical trainers are some of the quietest available because they friction belts, or alternator noises to mask these sounds on our elliptical resistance system itself is so quiet, you will occasionally hear other slight trainers. These mechanical noises, which may or may not be intermittent, gy to a rapidly spinning flywheel. All bearings, belts and other rotating frame. It is also normal for these sounds to change slightly during a workout and over time because of thermal expansion of the parts.

Why is the Elliptical Trainer I had delivered louder than the one at the store?

All fitness products seem quieter in a large store showroom because overlay floor. Sometimes a heavy rubber mat will help reduce reverberation through the floor. If a fitness product is placed close to a wall, there will be more reflected noise.

When should Ibe worried about a noise?

As long as the sounds your elliptical trainermakes are no louder than a elliptical traineris louder than this, you may want to call your service

How long will the drive belt last?

demanding applications such as motorcycle drives.

Can I move the trainer easily once it is assembled?

into the front legs. It is easy to move your Elliptical Trainer by rolling it on

What kind of routine maintenance is required?

How do I clean my Horizon Fitness Elliptical Trainer?

Clean with soap and water cleaners only. Never use solvents on plastic make exercise a desirable daily activity for you, the Elliptical Trainer maintenance free hours. Belts are now commonly used in far more the front transport wheels. It is important that you place your Horizon will be less reverberation on a carpeted concrete floor than on a wood

The computer modeling we have done indicated virtually thousands of technician. Sometimes an initial diagnosis can be made over the phone.

there is generally more background noise than in your home. Also, there rainer has a pair of transport wheels built are normal and are caused by the transfer of significant amounts of enerparts will generate some noise which will transmit through the casing and normal conversational tone of voice, it is considered normal noise. If your not needed. The most important maintenance step is to simply wipe your

Rev.v1.1

Congratulations on choosing a Horizon Fitness

Elliptical Trainer. You’ve taken an important step in developing and sustaining an exercise program! Your Horizon Fitness Elliptical Trainer is a tremendously effective tool for achieving your personal fitness goals. Regular use of your Horizon Fitness Elliptical Trainer can improve the quality of your life in so many ways.

Here are just a few of the health benefits of aerobic exercise:

• Weight Loss

• A Healthier Heart

• Improved Muscle Tone

• Increased Daily Energy Levels

• Reduced Stress

• Help In Countering Anxiety and

Depression

• An Improved Self Image

The key to reaping these benefits is to develop the exercise habit.

Your new Horizon Fitness Elliptical

Trainer will help you eliminate the obstacles that prevent you from getting in your exercise time.

Inclement weather and darkness won't interfere with your workout when you use your Horizon Fitness

Elliptical Trainer in the comfort of your home. This manual provides you with basic information for using and enjoying your new machine. A more complete knowledge of your new Horizon

Fitness Elliptical Trainer will assist you in realizing your goal of a healthy lifestyle.

GETTING STARTED

To avoid possible damage to this Elliptical Trainer, please follow these assembly steps in the correct order. Before proceeding, find your Elliptical Trainer’s serial number and model name located and enter it in the space provided below:

SERIAL NUMBER AND MODEL

NAME LOCATION:

Refer to this number when calling for service, and also enter this serial number on your Warranty Card and in your own records. Be sure to read the Safety Instructions and Owner’s Guide before using your new Horizon

Fitness elliptical trainer.

CAUTION:

BEFORE

BEGINNING

ANY EXERCISE

PROGRAM, ALWAYS

CONSULT YOUR

PHYSICIAN. IF YOU

EXPERIENCE CHEST

PAINS, NAUSEA, DIZZI-

NESS OR SHORTNESS

OF BREATH, STOP

EXERCISING AND

CONSULT YOUR

PHYSICIAN

BEFORE

CONTINUING.

In the event that a problem should arise,

DO NOT RETURN TO THE

STORE,

please contact:

Horizon Fitness

@

1.888.993.3199

or

www.horizonfitness.com

IMPORTANT SAFETY INSTRUCTIONS.

SAVE THESE INSTRUCTIONS

When using an electrical product, basic precautions should always be followed. Read all instructions before using this exercise product.

WARNING!

To reduce the risk of burns, fire, electrical shock or injury to persons:

• Use this exercise product for its intended use as described in this Owner's guide. Do not use attachments not recommended by the manufacture.

• Never drop or insert any object into any opening.

• Do not remove the elliptical trainer's side covers. Service should be performed only by an authorized Horizon

Fitness service provider.

• Never operate this elliptical trainer if it has a damaged cord or plug, if it is not working properly, if it has been damaged, or immersed in water.

• Keep the cord away from heated surfaces.

• Do not use outdoors.

• Only use the power cord provided with your Horizon Fitness elliptical trainer.

• Never place the power cord under carpeting or place any object on top of the power cord, which may pinch or damage it.

• Unplug your Horizon Fitness elliptical trainer before moving it.

OTHER SAFETY TIPS FOR YOUR HORIZON FITNESS ELLIPTICAL TRAINER.

CAUTION!

• If you experience chest pains, nausea, dizziness or shortness of breath, stop exercising immediately and consult your physician before continuing.

• Do not turn pedal arms by hand.

• Do not wear clothing that might catch on any part of the elliptical trainer.

• Make sure handlebars are secure before each use.

• Read the owner's guide before operating this elliptical trainer.

• Maintain a comfortable pace. Do not ‘sprint’ above 80 rpms on this machine.

• To maintain balance it is recommended to keep a grip on the handlebars while exercising, mounting or dismounting the machine.

CHILDREN

• Keep children off of your elliptical trainer at all times.

• When the elliptical is in use, young children and pets should be kept at least 10 feet away.

CLEANING

• Clean with soap and slightly damp cloth only. Never use solvents.

1 . 8 8 8 . 9 9 3 . 3 1 9 9 o r w w w . h o r i z o n f i t n e s s . c o m

enduranceextremeassemblyv1.1.qxd 12/6/2001 10:06 AM Page 2

U N P A C K I N G

Unpack your elliptical trainer where you will be using it. Place your trainer on a level flat surface. It is recommended that you place a protective covering on your floor. You will only need to attach the following items. Verify that the following parts and tools are included:

Parts

• 1 Power Supply

• 1 Front Foot Tube

• 2 Upper Handlebars

Tools

• 5mm Allen Wrench

• 4mm Allen Wrench

• 2 Lower Handlebar

Assemblies

• Screw Driver

• Flat Wrench

• 1 Console

• 1 Hardware Pack (contents listed below)

E N D U R A N C E E X T R E M E

STEP 1

Attaching the front foot tube a. Align the front foot tube with the holes in the base.

b. Attach the front foot tube with two

20mm bolts (A) and secure with the

5mm allen wrench.

H a r d w a r e

(Actual Size)

A) 20mm bolt

Quantity: 2

B) 54mm bolt

Quantity: 3

C) 25mm bolt

Quantity: 4

D) 10mm nut

Quantity: 4

STEP 2

Secure the console mast a. Slide the console mast boot onto the console mast.

b. Slide the console cable into the console mast. Holding the console mast above the top console mast bracket, guide the console cable through the console mast while simultaneously sliding the console mast onto the console mast bracket.

Continue to guide the console cable through the top of the console mast. To assist in pulling the console cable through the console mast, there should be a guide wire attached to the top of the console mast.

Attach the guide wire to the end of the cable and pull through the top of the mast. Discard the guide wire once the cable is pulled through.

c. Insert three 54mm bolts (B) and secure with a 5mm allen wrench.

d. Slide the console mast boot down to cover the bolt heads.

Warning! The console mast bolts must be securely tightened before use.

Failure to do so may result in personal injury or damage to the machine.

Console

Lower

Handlebars

Assembly

C

Heart Rate

Wires

D

B

Console

Cable

G

A

Upper

Handlebars

Assembly

Console Mast

Bracket

Front Foot

Tube

E

E

STEP 3

Attaching the bottom handlebars a. Slide the left lower handlebar assembly into the pedal arm post.

Insert two 25mm bolts (C) and two

10mm nuts (D). Secure with a 5mm allen wrench and a flat wrench.

b. Slide the top portion of the lower handlebar assembly into the console mast post. Secure with two 8mm screws (E) using the 4mm Allen wrench.

c. Repeat the step for the left side.

STEP 4

Attach the top handlebars a. Attach the right upper handlebar onto the console mast post. Secure with two 8mm screws (E) using the

4mm Allen wrench.

b. Repeat for the left side.

E) 8mm screw

Quantity: 8

NOTE: It is recommended that you apply grease to the threads of each bolt as you assemble your elliptical trainer, to prevent loosening and noise. Also, during each assembly step, ensure that ALL nuts and bolts are in place and partially threaded in before completely tightening any ONE bolt.

Pedal Arm

Post

STEP 5

Attaching the console a. Insert the console cable into the console.

b. Insert the hand pulse wires into the console.

c. Attach the console to the console mast with four 15mm screws (G).

Note: Screws (G) are located in the backside of the console.

d. Plug the power supply into the power jack located in the front of the machine, near the foot tube.

C U S T O M E R A S S I S TA N C E C E N T E R 1 . 8 8 8 . 9 9 3 . 3 1 9 9 o r w w w. h o r i z o n f i t n e s s . c o m