Milwaukee 58-03-0475 User's manual

Milwaukee 58-03-0475 User's manual
WIRING INSTRUCTIONS
TITLE
BULLETIN
ORBITAL SANDER
a
CRIMP LEAD 3 AND LEAD 7 TOGETHER IN Tl BEFORE INSERTING INTO SWITCH.
CRIMP LEAD 4 AND LEAD 8 TOGETHER IN Tl BEFORE INSERTING INTO SWITCH.
INSERT TERMINALS T2 ON LEADS 5 AND 6 INTO BRUSH
HOLDER BEFORE ROUTING THRU WIRE TRAPS.
’
’
58-03-0475
I
TUCK LEADS 7 AND 8 DOWN INTO THE
WIRE TRAP UNDER SWITCH.
TUCK LEADS 3 AND 4 DOWN
INTO THE WIRE TRAPS
BETWEEN SWITCH AND
FIELD.
NOTE: LEAVE NO SLACK ON FIELD
SIDE OF WIRE TRAPS. \
‘WIRE
t4
BLACK
SCHEMATIC
NOTE:
All leads must be held to 5 l/8’.
All field leads to ba measured from
and perpendicular to laminations.
All lead lengths are before stripping.
1 TERMINAL
kiiii%TOR
DESCRIPTION
1
DESCRIPTION 1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement