Straight Blade Devices - KVC Industrial Supplies Sdn Bhd

Straight Blade Devices - KVC Industrial Supplies Sdn Bhd
Straight Blade Devices
Index
HBL® Extra Heavy Duty
Industrial Series
Product
Page
Hospital Grade Duplex Receptacles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3
Duplex, Illuminated Face, Tamper Resistant and Isolated Ground . . . . . . . . . A-4
SNAPConnect™, Single and 4-PLEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-5
Plugs, Receptacles and Connector Bodies . . . . . . . . . . . . . . . . . . . . . . . . . . . A-6
HBL® Extra Heavy Duty Industrial Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-9
Specification Grade, Weather Resistant, Single and Special Purpose . . . . . A-10
Compact, Single and Style Line® Decorator Receptacles . . . . . . . . . . . . . . A-11
Hubbell-Pro Series SNAPConnect™ Receptacles . . . . . . . . . . . . . . . . . . . . . A-12
Hubbell-Pro Heavy Duty Specification Grade Receptacles . . . . . . . . . . . . . . A-14
NEC® Tamper Resistant and Weather Resistant Code Requirements . . . . . A-15
Commercial Specification Grade Receptacles . . . . . . . . . . . . . . . . . . . . . . . . A-16
Commercial Style Line® Decorator Receptacles . . . . . . . . . . . . . . . . . . . . . . A-18
4-PLEX® Receptacles and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-20
Insulgrip® Plugs and Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-22
Valise® Plugs and Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-24
Elastogrip® Plugs and Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-25
Insulgrip®, Elastogrip®, and Valise® Plugs and Connector Bodies . . . . . . . A-26
Insulgrip® Flanged Inlets and Receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . A-28
HBL® Extra Heavy Duty, Specification Grade Receptacles . . . . . . . . . . . . . A-29
Insulgrip® Plugs and Flanged Inlets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-30
Insulgrip® and Valise® Connector Bodies and Flanged Receptacles . . . . . . A-31
Plugs, Connector Bodies and Receptacles
15A and 20A 125V, 250V and 277V AC Devices . . . . . . . . . . . . . . . . . . . . . . A-32
20A 125/250V, 3Ø 250V AC, and 120/208V AC Devices . . . . . . . . . . . . . . . A-33
16 Ampere, 250 Volts AC International . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-34
Hazardous Location Receptacles, Plugs, Boxes and Accessories . . . . . . . A-35
Heavy Duty Insulgrip® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-36
Single Receptacles and Plugs
30A 125V, 250V, 277V AC and 125/250V Devices . . . . . . . . . . . . . . . . . . . A-37
30A 125/250V, 3Ø 250V AC and 120/208V AC Devices . . . . . . . . . . . . . . . A-38
50A 125V, 250V, 277V AC and 125/250V Devices . . . . . . . . . . . . . . . . . . . A-39
50A 125/250V, 3Ø 250V AC, and 120/208V AC Devices . . . . . . . . . . . . . . . A-40
60A 125/250V, 3Ø 250V AC, and 120/208V AC Devices . . . . . . . . . . . . . . . A-41
DIN Rail Utility Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-42
Miscellaneous and Combination Receptacles . . . . . . . . . . . . . . . . . . . . . . . . A-43
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-44
Technical Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-48
Straight Blade Devices
Section A
WR
W
R
SNAPConnect™
Receptacles
Commercial Specification
Grade
T
TR
WR
W
R
Insulgrip® Plugs and
Connectors
Index
www.hubbell-wiring.com
A-1
Hospital Grade
Hospital Grade
Straight Blade Devices
Straight Blade Devices
A-2
www.hubbell-wiring.com
Dimensions in Inches (mm)
Straight Blade Devices
Straight Blade Devices
Hospital Grade Duplex Receptacles
Features and Benefits
One-piece nickel-plated brass
integral ground strap for greater
corrosion resistance.
Patented ground contact provides
redundant grounding.
Back wired ground terminal
allows faster, easier installation.
Barbed assembly arms reduce
possibility of face/base separation.
RTP base offers greater heat
resistance plus contact stability.
Unique bypass contact design
results in greater contact force
and reduced heat buildup.
Square head, 10-thread bronze center
rivet won’t rotate, reduces stripping
and resists corrosion.
External bundling terminals contain
wire strands and are designed for
quick inspection.
I.D. marking surface provides
quick, sure circuit identification.
Deep body design increases impact
and chemical resistance.
Hubbell “Hospital Grade” Devices
To qualify for the “Hospital Grade” designation
and use of the associated green dot symbol,
UL requires that the manufacturer design its
devices to perform to specific levels. These levels
form an established baseline below which no
manufacturer can fall and still carry a green dot.
Reinforced thermoplastic back provides
superior thermal, electrical and
mechanical properties. By providing
contact stability, this high performance
material will reduce heat buildup giving
you long lasting performance.
• Exclusive nickel-plated bypass contact design
increases contact pressure, lowering the
operating temperature.
• Four point grounding system provides
redundant grounding for low resistance ground
continuity in high abuse areas.
• High tech reinforced thermoplastic polyester
(RTP) back is tough and heat resistant.
Because of these features and others, the benefit
is performance, reliability, and value for any health
care facility.
Dimensions in Inches (mm)
www.hubbell-wiring.com
Exclusive bypass contacts are made of
nickel-plated brass alloy. This design
increases blade retention forces, insuring
a reliable uninterrupted flow of power.
External wiring clamps allow for visual
inspection of the terminals. A unique
strand containment feature on the
terminal “bundles” the wire, ensuring
100% clamping of wire strands and
reducing heat from the termination.
A-3
Hospital Grade Duplex Receptacles
Hubbell sets their standards high. Each product
is built to withstand the severe conditions of
abuse that are unique to the hospital environment.
Hubbell receptacles have exclusive design
features that set them apart from the competition.
One piece, nickel plated brass mounting
strap with integral ground contacts, along
with secondary ground contact, provides
superior grounding for low resistance
flow of fault currents as well as corrosion
resistance. Barbed locking arms keep the
face locked in place to diminish potential
for face/base separation. Back wired
ground screw reduces installation time.
Straight Blade Devices
Straight Blade Devices
15 and 20 Ampere, 125 Volts
2 Pole, 3 Wire Grounding
Hospital Grade – HBL® Extra Heavy Duty Duplex, Illuminated Face Duplex,
Tamper-Resistant Duplex and Isolated Ground Duplex Receptacles
IP20
SUITABILITY
Hospital Grade
Receptacles
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
20A 125V
NEMA 5-20R
UL Listed
1 HP
HBL® Extra Heavy Duty, Duplex
Description
Flush, thermoplastic polyester face,
back and side wired, multiple
drive screws.
HBL8200GY
Flush, illuminated face,
back and side wired,
multiple drive screws.
Tamper-resistant receptacle
T
TR
with wire leads.
Isolated ground.(1)
Color
Brown
Gray
Ivory
Light Almond
Red
White
Gray
Ivory
Red
White
Brown
Gray
Ivory
Light Almond
Red
White
Orange
Red
Catalog Numbers
HBL8200
HBL8200GY
HBL8200I
HBL8200LA
HBL8200R
HBL8200W
HBL8200ILGY
HBL8200ILI
HBL8200ILR
HBL8200ILW
HBL8200SGA
HBL8200SGGYA
HBL8200SGIA
HBL8200SGLA
HBL8200SGRA
HBL8200SGWA
IG8200
IG8200R
HBL8300
HBL8300GY
HBL8300I
HBL8300LA
HBL8300R
HBL8300W
HBL8300ILGY
HBL8300ILI
HBL8300ILR
HBL8300ILW
HBL8300SGA
HBL8300SGGYA
HBL8300SGIA
HBL8300SGLA
HBL8300SGRA
HBL8300SGWA
IG8300
IG8300R
Color
Brown
Gray
Ivory
Light Almond
Red
White
Catalog Numbers
HBL8200H
HBL8200HG
HBL8200HI
HBL8200HLA
HBL8200HR
HBL8200HW
HBL8300H
HBL8300HG
HBL8300HI
HBL8300HLA
HBL8300HR
HBL8300HW
Slender/Compact, Duplex
Hospital Grade – HBL® Extra Heavy Duty
Description
Flush, thermoplastic polyester face,
back, and side wired, multiple
drive screws, Fed. Spec. verified.
Style Line® Decorator, Duplex*
Description
Flush, nylon face,
back and side wired.
Color
Catalog Numbers
Brown
HBL2172
HBL2182
Gray
HBL2172GY
HBL2182GY
Ivory
HBL2172I
HBL2182I
Office White
–
HBL2182OW
Red
HBL2172R
HBL2182R
White
HBL2172WA
HBL2182WA
Isolated ground.(1)
Ivory
–
IG2182I
Orange
–
IG2182
White
–
IG2182WA
Notes: (1) See Section J for complete line of isolated ground devices.
*Style Line duplex devices are not Fed. Spec. Listed.
See page A-44 for accessories.
See Section K for wallplates.
See page A-15 for NEC® Tamper and Weather Resistant Code Requirements.
See Section I for complete Hospital Grade products.
A-4
www.hubbell-wiring.com
Dimensions in Inches (mm)
Straight Blade Devices
Straight Blade Devices
15 and 20 Ampere, 125 Volts
2 Pole, 3 Wire Grounding
Hospital Grade – SNAPConnect™, Single and 4-PLEX® Receptacles
IP20
1.56"
(39.7)
SUITABILITY
Hubbell-Pro Series
Hospital Grade SNAPConnect™
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
20A 125V
NEMA 5-20R
UL Listed
1 HP
Duplex
Description
Hospital grade, flush, nylon face
modular receptacle which requires
pigtailed terminal below.
Color
Almond
Black
Brown
Gray
Ivory
Light Almond
Office White
Red
White
Catalog Numbers
SNAP8200AL
SNAP8300AL
SNAP8200BK
SNAP8300BK
SNAP8200
SNAP8300
SNAP8200GY
SNAP8300GY
SNAP8200I
SNAP8300I
SNAP8200LA
SNAP8300LA
SNAP8200OW
SNAP8300OW
SNAP8200R
SNAP8300R
SNAP8200W
SNAP8300W
2.62"
(66.5)
3.28"
(83.3)
.86"
(21.9)
SNAP8200I
Description
Clear terminal with 6-inch leads solid wire.
Clear terminal with 6-inch leads stranded wire.
Notes: See page A-44 for accessories.
See Section K for wallplates.
See page A-53 for technical information.
Catalog Numbers
SNAP6R1
SNAP6R2
1.63"
(41.4 )
1.94"
(49.3 )
IP20
3.28"
(83.3)
SUITABILITY
Hospital Grade
SNAP6R2
Receptacles
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
20A 125V
NEMA 5-20R
UL Listed
1 HP
.94"
(23.9)
HBL® Extra Heavy Duty, Single
HBL8210
Description
Flush, nylon face,
back and side wired
Fed. Spec. verified.
Color
Catalog Numbers
Almond
–
HBL8310AL
Brown
HBL8210
HBL8310
Gray
HBL8210GY
HBL8310GY
Ivory
HBL8210I
HBL8310I
Red
HBL8210R
HBL8310R
White
HBL8210W
HBL8310W
Panel mount on 1.94 in.
Brown
HBL8284
–
(49.2) centers.
Ivory
HBL8284I
HBL8384I
Isolated ground.(1)
Orange
IG8210
IG8310
Note: (1) See Section J for complete line of isolated ground devices.
.92”
(23.4)
4.30” sq.
(109.2)
3.02” (76.7)
3.38” (85.9)
HBL415HI
4-PLEX®
Description
4 outlet high impact resistant
Polycarbonate construction.
Mount to 4 in. square box.
Color
Catalog Numbers
Brown
HBL415H
HBL420H
Gray
−
HBL420HGY
Ivory
HBL415HI
HBL420HI
Red
HBL415HR
HBL420HR
White
HBL415HW
HBL420HW
4-PLEX adapter plates for
Brown
HBL4AP
HBL4AP
1- and 2-gang, device boxes.
Gray
HBL4APGY
HBL4APGY
Ivory
HBL4API
HBL4API
Red
HBL4APR
HBL4APR
White
HBL4APW
HBL4APW
Notes: See pages A-20 and A-21 for more information on 4-PLEX devices.
4-PLEX devices are not Fed. Spec. Listed.
Dimensions in Inches (mm)
.1”
(2.5)
www.hubbell-wiring.com
.38" (9.7)
4.78" 3.28"
(121.4) (83.3)
2.75"
(69.9)
.19" (4.8)
1.75"
(44.5 )
3.38"sq. (85.9)
HBL4API
A-5
Hospital Grade – SNAPConnect™, Single and 4-PLEX® Receptacles
Pigtailed Terminal
Straight Blade Devices
Straight Blade Devices
15 and 20 Ampere, 125 Volts
2 Pole, 3 Wire Grounding
Hospital Grade – Plugs and Connector Bodies
G
IP20
G
W
W
SUITABILITY
Hospital Grade
HBL8215C
15A 125V
NEMA 5-15P
UL CSA
Plugs
20A 125V
NEMA 5-20P
UL CSA
Insulgrip®
Description
Black and white nylon.
Transparent housing.
8 position angle plug,
transparent housing.
Cord Diameter
.230"-.720" (5.8-18.3)
.230"-.720" (5.8-18.3)
.250"-.655" (6.4-16.6)
Catalog Numbers
HBL8215C
HBL8315C
HBL8215CT
HBL8315CT
HBL8215CAT*
HBL8315CAT*
Valise®
Description
Cord Diameter
White nylon.
.300"-.660" (7.6-16.8)
Insulation displacement,
.300"-.360" (7.6-9.1)
white nylon.
Notes: *Not Fed. Spec. Listed.
See page A-45 for accessories.
IP20
HBL8115V
SUITABILITY
Hospital Grade
Hospital Grade – Plugs and Connector Bodies
Catalog Numbers
HBL8115V
HBL8364V
HBL8013V*
−
Connector Bodies
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
20A 125V
NEMA 5-20R
UL CSA
1 HP
®
Insulgrip
HBL8219C
Description
Cord Diameter
Black and white nylon.
.230"-.720" (5.8-18.3)
Transparent housing.
.230"-.720" (5.8-18.3)
Note: See page A-45 for accessories.
Catalog Numbers
HBL8219C
HBL8319C
HBL8219CT
HBL8319CT
Valise®
Description
White nylon.
Cord Diameter
.300"-.660" (7.6-16.8)
Catalog Numbers
HBL8119V
–
HBL8219CT
A-6
www.hubbell-wiring.com
Dimensions in Inches (mm)
Straight Blade Devices
Straight Blade Devices
15 and 20 Ampere, 250 Volts
2 Pole, 3 Wire Grounding
Hospital Grade – Heavy Duty, Specification Grade Plugs,
Receptacles and Connector Bodies
G
G
IP20
SUITABILITY
Hospital Grade
15A 250V
NEMA 6-15P
UL CSA
1.5 HP
Plugs
20A 250V
NEMA 6-20P
UL CSA
2 HP
Valise®
Description
Valise plug, white nylon.
Cord Diameter
.300"-.660"
(7.6-16.8)
Note: HP ratings listed above are based on 208 to 240V AC only.
Catalog Numbers
HBL8666V
HBL8464V
G
Receptacles
G
20A 250V
NEMA 6-20R
UL CSA
2 HP
Hospital Grade – Heavy Duty Plugs, Receptacles and Connector Bodies
Hospital Grade
15A 250V
NEMA 6-15R
UL CSA
1.5 HP
HBL8666V
®
HBL Extra Heavy Duty, Duplex
Description
Flush, thermoplastic polyester
face, back and side wired,
multiple drive screws.
Notes: See page A-44 for accessories.
See Section K for wallplates.
Hospital Grade
Color
Brown
Ivory
Catalog Numbers
HBL8600
HBL8400
HBL8600I
HBL8400I
HBL8600I
Connector Bodies
®
Valise
Description
White nylon.
Cord Diameter
.300"-.660"
(7.6-16.8)
Catalog Numbers
–
HBL8469V
HBL8469V
Dimensions in Inches (mm)
www.hubbell-wiring.com
A-7
Straight Blade Receptacles
Including Weather Resistant
WR
W
R
Receptacles
Straight Blade Devices
Straight Blade Devices
A-8
www.hubbell-wiring.com
Dimensions in Inches (mm)
Straight Blade Devices
Straight Blade Devices
HBL® Extra Heavy Duty Industrial Series
Features and Benefits
One-piece brass integral ground strap
for low resistance of fault currents.
Barbed assembly arms
reduce possibility of
face/base separation.
Ground retention clips for longer,
more consistent contact pressure.
Back wired ground
terminal allows faster,
easier installation.
Exclusive bypass contact design
results in greater contact force and
reduced heat buildup.
RTP base offers greater
heat resistance, plus
contact stability.
Square head, 10-thread brass
center rivet won't rotate, reduces
stripping and resists corrosion.
External bundling terminals
contain wire strands and are
designed for quick inspection.
I.D. marking surface provides
quick, sure circuit identification.
Deep nylon body
design delivers increased
impact resistance.
HBL5262
Quality in Design
environments, none match the total performance of the
HBL5262. Whether in a factory, office building, school,
hotel or shopping center, the Hubbell HBL5262 is the
receptacle of choice when people are depending on the
safety and reliability of a receptacle.
One piece, all brass, mounting strap with
integral ground contacts. The safest,
most reliable design for a low resistance
flow of fault currents. Oversized “bell"
shaped ground contacts, along with
nickel plated steel retaining shields,
help minimize damage to the grounding
system during abrupt pullout. Barbed
brass locking arms keep the faced
locked in place to diminish potential
for face/base separation. Back wired
ground terminal reduces installation time
and increases convenience.
The patented “bypass" contact design
incorporates high-conductivity materials
with superior spring characteristics
for increased contact force and
secure connections. Improved contact
performance reduces heat buildup and
ensures a reliable, uninterrupted flow
of power.
Reinforced thermoplastic base provides
superior thermal, electrical and
mechanical properties. By providing
contact stability this high tech material
will reduce heat buildup, giving you long
lasting performance.
External wiring clamps feature large
head brass screws (#10) for superior
torque values. Visible brass terminal
screws and clamps, with a unique
strand containment feature, ensure
100% clamping of wire strands,
reducing heat buildup.
Dimensions in Inches (mm)
www.hubbell-wiring.com
A-9
HBL® Extra Heavy Duty Industrial Series
Hubbell’s commitment to quality continually reinforces
a philosophy of unrivaled performance. No Hubbell
device exemplifies this philosophy more than the
HBL5262. While all Hubbell receptacles are designed
and manufactured to withstand even the harshest
Straight Blade Devices
Straight Blade Devices
15 and 20 Ampere, 125 Volts
2 Pole, 3 Wire Grounding
HBL® Extra Heavy Duty, Specification Grade, Weather Resistant,
Single and Special Purpose Receptacles
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
Receptacles
HBL® Extra Heavy Duty, Specification Grade, Duplex
1.65"
(41.9)
Description
Flush, nylon face,
back and side wired,
multiple drive screws.
2.72"
(69.1)
3.28"
(83.3)
.96"
(24.4)
Isolated ground.(1)
HBL5262
1.65"
(41.9)
WR
W
R
WR
2.72"
(69.1)
3.28"
(83.3)
Non-isolated ground,
bulk pack of 100.
Weather resistant,
flush, nylon face,
back and side wired,
multiple drive screws.
HBL® Extra Heavy Duty and Special Purpose Receptacles
WR
Corrosion resistant.
.96"
(24.4)
Weather resistant,
WR
W
R Isolated ground.(1)
HBL5362IWR
On 4 in. (101.6) round cover.
1.13"
(28.7)
3.28" 1.94"
(83.3) (49.3)
#6-32
TAP
Description
Flush, nylon face,
back and side wired,
multiple drive screws.
WR
W
R
HBL5261
Isolated ground.(1)
Weather resistant,
Isolated ground.(1)
Ring terminal connection.
Weather resistant,
WR
W
R flush, nylon face,
1.94" 1.39"
(49.3) (35.3)
HBL5284
Catalog Numbers
HBL5262BK
–
HBL5262
HBL5262GY
HBL5262I
HBL5262R
HBL5262W
IG5262GY
IG5262I
IG5262
IG5262R
–
–
HBL5362BK
HBL5362BL
HBL5362
HBL5362GY
HBL5362I
HBL5362R
HBL5362W
IG5362GY
IG5362I
IG5362
IG5362R
IG5362W
HBL5362M4
Black
Brown
Gray
Ivory
Red
White
Ivory
Yellow
Gray
Ivory
Orange
Red
White
Brown
HBL5262BKWR
HBL5262WR
HBL5262GYWR
HBL5262IWR
HBL5262RWR
HBL5262WWR
HBL52CM62I
HBL52CM62
IG5262GYWR
IG5262IWR
IG5262WR
IG5262RWR
–
HBL5282
HBL5362BKWR
HBL5362WR
HBL5362GYWR
HBL5362IWR
HBL5362RWR
HBL5362WWR
–
HBL53CM62
IG5362GYWR
IG5362IWR
IG5362WR
IG5362RWR
IG5362WWR
–
HBL Extra Heavy Duty, Specification Grade, Single
.94"
(23.9)
1.63"
(41.4)
Color
Black
Blue
Brown
Gray
Ivory
Red
White
Gray
Ivory
Orange
Red
White
Orange
®
1.39"
(35.3)
A-10
20A 125V
NEMA 5-20R
UL Listed
1 HP
.86"
(21.8)
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
20A 125V
NEMA 5-20R
UL Listed
1 HP
Color
Black
Brown
Gray
Ivory
White
Orange
Orange
Catalog Numbers
HBL5261BK
HBL5261
–
HBL5261I
–
IG5261
IG5261WR
HBL5361BK
HBL5361
HBL5361GRY
HBL5361I
HBL5361W
IG5361
IG5361WR
Brown
White
Yellow
Brown
Gray
Ivory
HBL5261RT
HBL5261WRT
HBL5261YRT
HBL5261WR
HBL5261GYWR
HBL5261IWR
HBL5361RT
–
–
HBL5361WR
HBL5361GYWR
HBL5361IWR
back and side wired,
multiple drive screws.
Corrosion resistant.
Yellow
HBL52CM61
HBL53CM61
Panel mount on 1.94 in.
Brown
HBL5284
HBL5357
(49.3) centers.
Notes: See page A-44 for accessories.
See Section K for wallplates.
(1) See Section J for complete line of isolated ground devices.
See page A-15 for NEC® Tamper and Weather Resistant Code Requirements.
www.hubbell-wiring.com
Dimensions in Inches (mm)
Straight Blade Devices
Straight Blade Devices
15 and 20 Ampere, 125 Volts
2 Pole, 3 Wire Grounding
HBL® Extra Heavy Duty Compact and
Style Line® Decorator Receptacles
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
Receptacles
20A 125V
NEMA 5-20R
UL Listed
1 HP
1.33"
(33.8)
HBL® Extra Heavy Duty Compact, Back and Side Wired, Duplex
Description
Flush, nylon face,
back and side wired.
On a 4 in. (101.6) round cover.
Color
Black
Blue
Brown
Gray
Ivory
Red
White
Brown
Catalog Numbers
HBL5252BK
–
HBL5252
HBL5252GY
HBL5252I
HBL5252R
HBL5252W
HBL5253
HBL5352BK
HBL5352BL
HBL5352
HBL5352GY
HBL5352I
HBL5352R
HBL5352W
–
2.73"
(69.3)
3.28"
(83.3)
.80"
(20.3)
HBL5252
1.33"
(33.8)
HBL® Extra Heavy Duty Compact, Side Wired Only, Duplex
Ring terminal connection.
Color
Brown
Gray
Ivory
White
Brown
Catalog Numbers
HBL5242
HBL5242GY
HBL5242I
HBL5242W
HBL5242RT
HBL5342
HBL5342GY
HBL5342I
HBL5342W
HBL5342RT
2.73"
(69.3)
3.28"
(83.3)
.80"
(20.3)
Heavy Duty, Single
Description
Flush, side wired only.
Panel mount 1.75 in.
(44.5) centers.
Color
Brown
Ivory
Brown
Ivory
Catalog Numbers
HBL5251
–
HBL5251I
–
HBL5258
HBL5358
HBL5258I
–
Heavy Duty Style Line® Decorator*
Description
Flush, nylon face,
back and side wired.
Isolated ground.(1)
Color
Almond
Black
Brown
Gray
Ivory
Office White
White
Gray
Orange
HBL5242
3.28" 1.39"
(83.3) (35.3)
Catalog Numbers
HBL2152AL
HBL2152BK
HBL2152
HBL2152GY
HBL2152I
HBL2152OW
HBL2152WA
–
IG2152
Notes: See page A-44 for accessories.
See Section K for wallplates.
(1) See Section J for complete line of isolated ground devices.
*Style Line Duplex devices are not Fed. Spec. Listed.
HBL2162AL
HBL2162BK
HBL2162
HBL2162GY
HBL2162I
HBL2162OW
HBL2162WA
IG2162GY
IG2162
.92"
(23.3)
HBL5251
1.47"
(37.3)
1.75" 1.39"
(44.5) (35.3)
1.13"
(28.7)
#8-32
TAP
HBL5258
1.36"
(34.5)
2.75"
(69.9)
3.28"
(83.3)
.80"
(20.3)
HBL2152
Dimensions in Inches (mm)
www.hubbell-wiring.com
A-11
HBL® Extra Heavy Duty Compact and Style Line® Decorator Receptacles
Description
Flush, nylon face,
side wired only.
Straight Blade Devices
Straight Blade Devices
Hubbell-Pro Series SNAPConnect™ Receptacles
Features and Benefits
Installation ease.
• Self-grounding clip.
Audible SNAP, indicates
solid connection.
• Secure, easy grip latch.
Inspection of power
contacts.
• Clear terminal housing.
• No exposed metal.
Requires minimal box space.
Hubbell-Pro Series SNAPConnect™ Receptacles
• Compact size.
• Clean finished look.
SNAPConnect™ Time Savings
Rough-in the SNAPConnect
terminal instead of pigtails.
Save One Minute!
Hubbell's new SNAPConnect
receptacles make installation fast, easy
and consistent so you can complete
projects sooner—saving more than three
minutes per device.
Remove protective packaging.
Snap the duplex to the circuit.
Save Over Three Minutes!
• Consistent installation every time.
• Compact in wallbox.
• Meet deadlines.
– No stripping
– No looping
– No terminals
– No tape
A-12
Tighten mounting screws,
attach wallplate and trim
out complete.
Less Than One Minute!
www.hubbell-wiring.com
Dimensions in Inches (mm)
Straight Blade Devices
Straight Blade Devices
15 and 20 Ampere, 125 Volts
2 Pole, 3 Wire Grounding
Hubbell-Pro Series SNAPConnect™ Receptacles
s
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
Receptacles
1.56"
(39.7)
20A 125V
NEMA 5-20R
UL Listed
1 HP
Hubbell-Pro Series Heavy Duty
SNAPConnect™ Duplex
Description
Specification grade, flush, nylon face,
modular receptacle which requires
pigtailed terminal below.
Hospital grade, flush, nylon face
modular receptacle which requires
pigtailed terminal below.
Color
Almond
Black
Brown
Gray
Ivory
Light Almond
Office White
Red
White
Almond
Black
Brown
Gray
Ivory
Light Almond
Office White
Red
White
Catalog Numbers
SNAP5262AL
SNAP5262BK
SNAP5262
SNAP5262GY
SNAP5262I
SNAP5262LA
SNAP5262OW
SNAP5262R
SNAP5262W
SNAP8200AL
SNAP8200BK
SNAP8200
SNAP8200GY
SNAP8200I
SNAP8200LA
SNAP8200OW
SNAP8200R
SNAP8200W
SNAP5362AL
SNAP5362BK
SNAP5362
SNAP5362GY
SNAP5362I
SNAP5362LA
SNAP5362OW
SNAP5362R
SNAP5362W
SNAP8300AL
SNAP8300BK
SNAP8300
SNAP8300GY
SNAP8300I
SNAP8300LA
SNAP8300OW
SNAP8300R
SNAP8300W
2.62"
(66.5)
3.28"
(83.3)
.86"
(21.9)
SNAP5362I
1.56"
(39.7)
2.62"
(66.5)
3.28"
(83.3)
Straight Pigtailed Terminal
.86"
(21.9)
Catalog Numbers
SNAP6R1
SNAP6R2
SNAP8200I
Hubbell-Pro Series SNAPConnect™ Receptacles
Description
Clear terminal with 6-inch leads solid wire.
Clear terminal with 6-inch leads stranded wire.
Note: See page A-53 for technical information.
See page A-44 for accessories.
SNAP6R2
Hubbell-Pro Series Heavy Duty
SNAPConnect™ Style Line® Decorator*
Description
Specification grade, flush, nylon face,
modular receptacle which requires
pigtailed terminal.
Hospital grade, flush, nylon face
modular receptacle which requires
pigtailed terminal.
Color
Almond
Black
Brown
Gray
Ivory
Light Almond
Red
White
Almond
Black
Brown
Gray
Ivory
Light Almond
Red
White
Catalog Numbers
SNAP2152AL
SNAP2152BK
SNAP2152
SNAP2152GY
SNAP2152I
SNAP2152LA
SNAP2152R
SNAP2152W
SNAP2172AL
SNAP2172BK
SNAP2172
SNAP2172GY
SNAP2172I
SNAP2172LA
SNAP2172R
SNAP2172W
SNAP2162AL
SNAP2162BK
SNAP2162
SNAP2162GY
SNAP2162I
SNAP2162LA
SNAP2162R
SNAP2162W
SNAP2182AL
SNAP2182BK
SNAP2182
SNAP2182GY
SNAP2182I
SNAP2182LA
SNAP2182R
SNAP2182W
SNAP2162I
Right Angle Pigtailed Terminal*
Description
Clear terminal with 6-inch leads solid wire.
Clear terminal with 6-inch leads stranded wire.
Catalog Numbers
SNAP1R
SNAP2R
SNAP1R
Note: *Available late 2008. Hubbell is continuing to expand the SNAPConnect line—check our
website for updates.
Dimensions in Inches (mm)
www.hubbell-wiring.com
A-13
Straight Blade Devices
Straight Blade Devices
15 and 20 Ampere, 125 Volts
2 Pole, 3 Wire Grounding
Hubbell-Pro Series Receptacles
1.41"
(35.8)
Receptacles
20A 125V
NEMA 5-20R
UL Listed
1 HP
Hubbell-Pro Heavy Duty, Specification Grade,
Duplex, Back and Side Wired
2.73"
(69.3)
3.28"
(83.3)
Description
Color
Catalog Numbers
Finder groove nylon face.
Almond
Black
Blue
Brown
Gray
Ivory
Light Almond
Office White
Red
White
5262AL
5262BLK
–
5262B
5262G
5262I
5262LA
5262OW
5262R
5262W
5362AL
5362BLK
5362BL
5362B
5362G
5362I
5362LA
5362OW
5362R
5362W
Weather resistant,
Black
Brown
Gray
Ivory
White
5262BKWR
5262WR
5262GYWR
5262IWR
5262WWR
5362BKWR
5362WR
5362GYWR
5362IWR
5362WWR
Smooth nylon face.
Almond
Black
Brown
Gray
Ivory
Light Almond
Office White
Red
White
5252AAL
5252ABLK
5252AB
5252AG
5252AI
5252ALA
5252AOW
5252AR
5252AW
5352AAL
5352ABLK
5352AB
5352AG
5352AI
5352ALA
5352AOW
5352AR
5352AW
Isolated ground.(1)
Black
Blue
Gray
Ivory
Orange
Office White
White
CR5252IGBK
–
CR5252IGGY
CR5252IGI
CR5252IG
CR5252IGOW
CR5252IGW
CR5352IGBK
CR5352IGBL
CR5352IGGY
CR5352IGI
CR5352IG
CR5352IGOW
CR5352IGW
.83"
(21.1)
5262
1.41"
(35.8)
WR
W
R finder groove nylon face.
2.73"
(69.3)
3.28"
(83.3)
.83"
(21.1)
5362IWR
1.32"
(33.78)
2.73"
(69.3)
3.28"
(83.3)
.80"
(20.32)
Hubbell-Pro Series Receptacles
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
1.05"
(26.67)
Notes: (1) See Section J for complete line of isolated ground devices.
See page A-44 for accessories.
See Section K for wallplates.
Horsepower ratings listed above are AC only.
See pages A-54 and A-55 for technical information.
CR5252IG
A-14
www.hubbell-wiring.com
Dimensions in Inches (mm)
Straight Blade Devices
Straight Blade Devices
2008 NEC® Receptacle Code Compliance
New
Tamper-Resistant
Duplex Receptacles
New
Weather-Resistant
Duplex Receptacles
Comply with NEC 406.11
Comply with NEC 210.52
Comply with NEC 406.8(A)
All 125V, 15A and 20A
receptacles shall be
listed tamper-resistant
receptacles per NEC
Article 406.11, "TamperResistant Receptacles in
Dwelling Units".
All 125V and 250V,
15A and 20A receptacles
shall be listed as
weather resistant type
per NEC Article 406.8,
"Receptacles in Damp
and Wet Locations".
Tamper Resistant
These symbols appear throughout this catalog for easy identification.
WR
W
R
What Do These Code Requirements Mean?
Tamper-Resistant (TR)
receptacles incorporate
internal mechanisms to limit
access to energized internal
components.
Homes
This new TR requirement
is mandatory for use in
dwelling unit outlets.
There are also many other
applications where the
use of TR receptacles can
provide an additional level of
electrical safety.
Weather-Resistant (WR)
receptacles installed
outdoors and in other wet
and damp locations are
subject to more demanding
temperature variations,
direct sunlight and unusual
mechanical abuse than
those in a typical dry
environment. Hubbell's WR
receptacles are designed
to withstand these
environments
and conditions.
Washdown Areas
Hotels
Transit Centers
Waiting Rooms
Amusement Parks
Day Care Centers
Open Air Markets
®
NEC is a registered trademark of the National Fire Protection Association (NFPA).
Dimensions in Inches (mm)
www.hubbell-wiring.com
A-15
NEC® Tamper- and Weather-Resistant Receptacle Code Compliance
T
TR
Weather Resistant
Straight Blade Devices
Straight Blade Devices
Commercial Specification Grade Receptacles
Features and Benefits
Installation ease.
• Self-grounding staple.
T
TR
Tamper
Resistant
Durable construction.
• Nylon face and base.
Installation ease.
• Easy access split circuit tab.
• Fork terminal capable.
Modern architectural appearance.
• Style Line® Decorator Face.
Sturdy construction.
• Wrap-around galvanized steel straps.
DR20I
Commercial Specification Grade Receptacles
DR20GRYTR
Installation ease.
• Single tab breakoff ears.
• Self-grounding staple.
Durable construction.
• Nylon face and base.
Installation ease.
• Easy access split circuit tab.
• Fork terminal capable.
• Oversized terminal screws.
Sturdy construction.
• Wrap-around galvanized steel straps.
CR15TR
BR15I
A-16
www.hubbell-wiring.com
Dimensions in Inches (mm)
Straight Blade Devices
Straight Blade Devices
15 and 20 Ampere, 125 Volts
2 Pole, 3 Wire Grounding
Commercial Specification Grade Duplex Receptacles
1.32"
(33.6)
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
Receptacles
20A 125V
NEMA 5-20R
UL Listed
1 HP
Commercial, Specification Grade,
Duplex, Side and Back Wired
Description
Side and back wired,
commercial.
Tamper Resistant.*
T
TR
Weather Resistant.
WR
W
R
Catalog Numbers
Almond
Black
Brown
Gray
Ivory
Light Almond
Office White
White
Almond
Black
Brown
Gray
Ivory
Light Almond
White
Almond
Black
Brown
Gray
Ivory
Light Almond
White
Almond
Black
Brown
Gray
Ivory
Light Almond
White
BR15AL
BR15BLK
BR15
BR15GRY
BR15I
BR15LA
BR15OW
BR15WHI
BR15ALTR
BR15BLKTR
BR15TR
BR15GRYTR
BR15ITR
BR15LATR
BR15WHITR
BR15ALWR
BR15BLKWR
BR15WR
BR15GRYWR
BR15IWR
BR15LAWR
BR15WHIWR
BR15ALWRTR
BR15BLKWRTR
BR15WRTR
BR15GRYWRTR
BR15IWRTR
BR15LAWRTR
BR15WHIWRTR
2.73"
(69.3)
3.28"
(83.3)
BR20AL
BR20BLK
BR20
BR20GRY
BR20I
BR20LA
BR20OW
BR20WHI
BR20ALTR
BR20BLKTR
BR20TR
BR20GRYTR
BR20ITR
BR20LATR
BR20WHITR
BR20ALWR
BR20BLKWR
BR20WR
BR20GRYWR
BR20IWR
BR20LAWR
BR20WHIWR
BR20ALWRTR
BR20BLKWRTR
BR20WRTR
BR20GRYWRTR
BR20IWRTR
BR20LAWRTR
BR20WHIWRTR
.83"
(21.1)
BR15I
1.32"
(33.6)
2.73"
(69.3)
3.28"
(83.3)
.83"
(21.1)
BR20TR
1.32"
(33.6)
2.73"
(69.3)
3.28"
(83.3)
Notes: See page A-44 for accessories.
See Section K for wallplates.
See page A-15 for NEC® Tamper and Weather Resistant Code Requirements.
See page A-55 for technical information.
*Tamper-resistant devices are not Fed. Spec. Listed.
.83"
(21.1)
BR15IWR
1.32"
(33.6)
2.73"
(69.3)
3.28"
(83.3)
.83"
(21.1)
BR20WRTR
Dimensions in Inches (mm)
www.hubbell-wiring.com
A-17
Commercial Specification Grade Duplex Receptacles
Weather and Tamper
Resistant.*
Color
Straight Blade Devices
Straight Blade Devices
15 and 20 Ampere, 125 Volts
2 Pole, 3 Wire Grounding
Commercial Style Line® Decorator Receptacles
1.30"
(32.9)
Receptacles
Description
Side and back wired.
1.07"
(27.1)
DR20GRY
T
TR
1.30"
(32.9)
2.73"
(69.4)
3.28"
(83.3)
WR
W
R
T
TR
1.07"
(27.1)
DR20ITR
1.30"
(32.9)
3.28"
(83.3)
20A 125V
NEMA 5-20R
UL Listed
1 HP
Commercial Specification Grade
Duplex, Side and Back Wired
2.73"
(69.4)
3.28"
(83.3)
Commercial Style Line® Decorator Receptacles
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
Color
Catalog Numbers
DR15AL
DR20AL
Almond
Black
DR15BLK
DR20BLK
Brown
DR15
DR20
Gray
DR15GRY
DR20GRY
Ivory
DR15I
DR20I
Light Almond
DR15LA
DR20LA
Office White
DR15OW
DR20OW
DR15WHI
DR20WHI
White
Tamper Resistant.*
Almond
DR15ALTR
DR20ALTR
Black
DR15BLKTR
DR20BLKTR
Brown
DR15TR
DR20TR
Gray
DR15GRYTR
DR20GRYTR
DR15ITR
DR20ITR
Ivory
Light Almond
DR15LATR
DR20LATR
White
DR15WHITR
DR20WHITR
Weather and Tamper
Almond
DR15ALWRTR
DR20ALWRTR
Resistant.*
Black
DR15BLKWRTR
DR20BLKWRTR
DR15WRTR
DR20WRTR
Brown
Gray
DR15GRYWRTR
DR20GRYWRTR
Ivory
DR15IWRTR
DR20IWRTR
Light Almond
DR15LAWRTR
DR20LAWRTR
White
DR15WHIWRTR
DR20WHIWRTR
Notes: See page A-44 for accessories.
See Section K for wallplates.
See page A-15 for NEC® Tamper and Weather Resistant Code Requirements.
See page A-55 for technical information.
*Tamper-resistant devices are not Fed. Spec. Listed.
2.73"
(69.4)
1.07"
(27.1)
DR20GRYWRTR
A-18
www.hubbell-wiring.com
Dimensions in Inches (mm)
Straight Blade Devices
Straight Blade Devices
15 and 20 Ampere, 125 Volts
2 Pole, 3 Wire Grounding
Commercial Specification Grade Duplex Receptacles
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
Receptacles
1.32”
(33.6)
20A 125V
NEMA 5-20R
UL Listed
1 HP
Commercial, Specification Grade,
Duplex, Side Wired Only
Description
Smooth nylon face.
T
TR
Color
Catalog Numbers
.83"
(21.1)
CR15I
1.32"
(33.6)
2.73"
(69.3)
3.28"
(83.3)
.83"
(21.1)
CR15TR
1.32”
(33.6)
2.73"
(69.3)
3.28"
(83.3)
.83"
(21.1)
CRF15I
Dimensions in Inches (mm)
www.hubbell-wiring.com
A-19
Commercial Specification Grade Duplex Receptacles
Almond
CR15AL
CR20AL
Black
CR15BLK
CR20BLK
Brown
CR15
CR20
Gray
CR15GRY
CR20GRY
Ivory
CR15I
CR20I
Light Almond
CR15LA
CR20LA
Office White
CR15OW
CR20OW
White
CR15WHI
CR20WHI
Tamper resistant.*
Almond
CR15ALTR
CR20ALTR
Black
CR15BLKTR
CR20BLKTR
Brown
CR15TR
CR20TR
Gray
CR15GRYTR
CR20GRYTR
Ivory
CR15ITR
CR20ITR
Light Almond
CR15LATR
CR20LATR
White
CR15WHITR
CR20WHITR
Finder groove.
Almond
CRF15AL
CRF20AL
Black
CRF15BLK
CRF20BLK
Brown
CRF15
CRF20
Gray
CRF15GRY
CRF20GRY
Ivory
CRF15I
CRF20I
Light Almond
CRF15LA
CRF20LA
Office White
CRF15OW
CRF20OW
White
CRF15WHI
CRF20WHI
Notes: See page A-44 for accessories.
See Section K for wallplates.
See page A-15 for NEC® Tamper and Weather Resistant Code Requirements.
See page A-55 for technical information.
*Tamper-Resistant devices are not Fed. Spec. Listed.
2.73"
(69.3)
3.28"
(83.3)
Straight Blade Devices
Straight Blade Devices
4-PLEX® Receptacles
Features and Benefits
Mounts directly to 4-inch square box.
Unique face design accepts up to four straight, angle or molded plugs.
Heavy duty, impact resistant housing.
Heavy duty, triple wipe, brass power and ground contacts.
“A” and “B” circuit identification molded into face.
Removable knockouts for mounting to octagon concrete ring or box.
Snub hole for fast, easy terminations.
Easily accessible break-off tabs for split circuit wiring.
4-PLEX® Receptacles
Three conductors energize all four outlets.
Large #8 combination Robertson head terminal screws for ease of wiring.
Four-in-One Receptacle
4-PLEX is a perfect solution for outlet scarce locations. This receptacle can be mounted on a single or 2-gang flush outlet box or
on a non-metallic portable box for temporary power applications. If mounted on a 4-inch square box, this product complies with
NEC® Article 406.4 (B). Available in industrial grade, hospital grade, isolated ground and surge protected versions. Accessories
include mounting plates and portable outlet boxes.
NEC® is a registered trademark of the National Fire Protection Association (NFPA).
A-20
www.hubbell-wiring.com
Dimensions in Inches (mm)
Straight Blade Devices
Straight Blade Devices
15 and 20 Ampere, 125 Volts
2 Pole, 3 Wire Grounding
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
®
4-PLEX Receptacles
20A 125V
NEMA 5-20R
UL Listed
1 HP
.92"
(23.4)
.1"
(2.5)
Over Size Robertson/Slotted Head Terminal Screws
Description
Specification grade.
Isolated ground.(1)
Surge suppression.
Color
Black
Brown
Gray
Ivory
White
Catalog Numbers
HBL415BK
HBL420BK
HBL415
HBL420
HBL415GY
HBL420GY
HBL415I
HBL420I
HBL415W
HBL420W
Orange
Blue
Ivory
IG415
HBL415S
HBL415IS
4.30" sq.
(109.2)
IG420
HBL420S
HBL420IS
Notes: Horsepower ratings are AC only.
See page A-56 for technical information.
4-PLEX Receptacles are of a non-metallic design. Product is supplied with isolated ground
symbol stickers. Apply if needed.
Mounts to 4-inch square box.
(1) See Section J for complete line of isolated ground devices.
3.02" (76.7)
3.38" (85.9)
HBL415I
.92"
(23.4)
.1"
(2.5)
4.30" sq.
(109.2)
3.02" (76.7)
3.38" (85.9)
HBL415S
Accessories
3.38" sq. (85.9)
Description
4-PLEX Adapter Plates for
1- and 2- gang.
Catalog Numbers
HBL4APBL
HBL4AP
HBL4APGY
HBL4API
HBL4APO
HBL4APR
HBL4APW
HBL4PBBK
HBL4PB
HBL4PBI
4.30" sq.
(109.2)
.84"
(21.3)
2 Punchouts
4.05" sq.
(102.9)
3.28" (83.3)
.66" (16.8)
Dia. Wire Hole
HBL4PBI
.38" (9.7)
Notes: 4-PLEX Box is not UL listed. UL listing does not apply when 4-PLEX Receptacle is used
with 4-PLEX Box in extension cord application. Supplied with one cord clamp.
4.78" 3.28"
(121.4) (83.3)
2.75"
(69.9)
.19" (4.8)
1.75"
(44.5 )
3.38"sq. (85.9)
HBL4API
Dimensions in Inches (mm)
www.hubbell-wiring.com
A-21
4-PLEX® Receptacles and Accessories
4-PLEX Portable Box.
Portable 4 in. (101.6) square box with
cord grip. Accepts up to .66 in. (16.8)
diameter cord.
Color
Blue
Brown
Gray
Ivory
Orange
Red
White
Black
Brown
Ivory
Insulgrip® Plugs and Connectors
Insulgrip® Plugs and Connectors
Straight Blade Devices
Straight Blade Devices
A-22
www.hubbell-wiring.com
Dimensions in Inches (mm)
Straight Blade Devices
Straight Blade Devices
Insulgrip® 15 and 20 Ampere Plugs and Connectors
Featuring Integral VARI-SIZE® Cord Grip
Individually molded face for
each blade configuration keeps
debris out of plug interior.
Roomy wiring chamber provides
ample space for wiring.
Individual wiring terminals
completely enclosed in their
own separate chambers.
Powerful, offsetting cord grips clamp
on individual conductors and outer cord
jacket to prevent strain on terminals.
Ribbed nylon housing is impact
and chemical resistant.
Beveled housing prevents snagging
when dragged across uneven surfaces.
Multiple drive screws provide screwdriver
versatility. Pocketed recess for cord grip
screws deter slippage of the screwdriver.
VARI-SIZE® pointer set to “smaller than
gauge" position. Cord diameter range is
.23 to .36 inch (5.8 to 9.0). Accepts slotted
and Phillips head drivers.
Transparent angled wiring entrance holes
permit “straight in" conductor insertion.
Catalog number is visible on the device
while in use for easy identification.
Powerful offsetting cord grips clamp on
individual conductors and outer cord jacket
to prevent strain on terminations.
www.hubbell-wiring.com
A-23
Insulgrip® Plugs and Connectors
Dimensions in Inches (mm)
Integral VARI-SIZE® insert adjusts to a
wide range of cord sizes: .23 to .72 inch
(5.8 to 18.3).
Straight Blade Devices
Straight Blade Devices
Valise® Plugs and Connectors
Features and Benefits
Two captive multiple drive assembly screws.
Totally insulated impact and crush resistant nylon body.
Valise® Plugs and Connectors
Nylon webs are provided to make wiring quick and easy
by joining the three sections together during assembly.
Unique patented clamp type terminals provide
a superior electrical connection by “bundling” the
conductor strands when clamps are tightened.
Eight specially designed load bearing locking lugs insure a
positive fit as the blade holder and sides are closed.
Powerful cord grips prevent conductor slippage
and strain on wiring terminals.
Removable cord inserts. Device accommodates a
wide range of cord sizes – .220" -.660" (5.6-16.8).
A-24
www.hubbell-wiring.com
Dimensions in Inches (mm)
Straight Blade Devices
Straight Blade Devices
Elastogrip® High Visibility Yellow Plugs and Connectors
Features and Benefits
Watertight Plug
Multiple drive “U-Drive” fast lead body assembly screws.
Neoprene bushing keeps water and dust out.
Color coded Kellems GOTCHA® rings
provide increased cord retention.
Thermoplastic elastomer housing resists weathering
caused by ultraviolet rays and ozone better than rubber.
Also oil and chemical resistant.
Three separate transparent wiring chambers
allow for visual inspection.
Watertight Connector Body
Closure plug seals connector body
when disconnected from plug.
Integral weatherproofing shroud seals
connection between plug and connector.
Elastogrip® Plugs and Connectors
Pretensioned “bypass” design female contacts
for abuse resistance and reliability.
Nylon compression nut keeps water and dust
from getting into the body around the cord.
Dust Tight Plug
Thermoplastic elastomer housing.
Powerful nylon cord grip prevents
strain on terminals.
Dust and moisture seal keeps out liquids,
metal filings and other foreign materials.
Multiple drive “U-Drive” fast lead body assembly screws.
Dimensions in Inches (mm)
www.hubbell-wiring.com
A-25
Straight Blade Devices
Straight Blade Devices
15 and 20 Ampere, 125 Volts
2 Pole, 3 Wire Grounding
Insulgrip®, Elastogrip® and Valise® Plugs
G
G
W
W
IP20
1.97"
(50.0)
15A 125V
NEMA 5-15P
UL CSA
SUITABILITY
Plugs
1.53"
(38.9)
Insulgrip
Description
Black and white nylon.
HBL5266C
Blue and white nylon.
1.22"
(30.9)
Black nylon extra large cord clamp.
Corrosion resistant yellow nylon.
2.11"
(53.6)
8-position angle plug, black
and white nylon.
8-position angle plug,
transparent enclosure.
Anchor lock, black & white nylon.(1)
1.53"
(38.9)
HBL5266CA
2.19"
(55.6)
1.56"
(39.6)
20A 125V
NEMA 5-20P
UL CSA
Anchor lock, corrosion resistant
yellow nylon.(1)
Finger grip, black neoprene,
combination screws. CSA only.
Fusible, black vinyl housing,
slotted screws. CSA only.
HBL1447
Cord Diameter
.230"-.720"
(5.8-18.3)
.230"-.720"
(5.8-18.3)
.360"-.720"
(9.1-18.3)
.230"-.720"
(5.8-18.3)
.325"-.655"
(8.3-16.6)
.325"-.655"
(8.3-16.6)
.230"-.720"
(5.8-18.3)
.230"-.720"
(5.8-18.3)
.312"-.468"
(7.9-11.9)
.296"-.625"
(7.5-15.9)
Catalog Numbers
HBL5266C
HBL5366C
HBL5266CBL
–
HBL5266EBK
HBL5366EBK
HBL52CM66C
HBL53CM66C
HBL5266CA
HBL5366CA
HBL5266CAT
–
HBL5280C
–
HBL52CM80C
–
HBL5921
–
HBL5299
–
IP20 and IP55
SUITABILITY
®
Elastogrip
Description
Yellow elastomer, dust tight.
2.63"
(66.8)
1.56"
(39.6)
Yellow elastomer, watertight.
Cord Diameter
.300"-.655"
(7.6-16.6)
.300"-.655"
(7.6-16.6)
Catalog Numbers
HBL1447
HBL1433
HBL14W47*
HBL14W33*
HBL14W47
IP20
SUITABILITY
Valise®
15 and 20 Ampere, 125 Volts
1.88"
(47.8)
1.25"
(31.8)
1.13"
(28.7)
Description
Yellow nylon.
Black nylon.
Gray nylon.
HBL5965VY
Orange nylon, sold in bulk
pack of 50.
Insulation displacement
terminals, black nylon.
Insulation displacement
terminals, yellow nylon.
1.17"
(29.7)
1.60"
(40.6)
HBL5966VBLK
A-26
1.24"
(31.5)
Cord Diameter
.220"-.660"
(5.6-16.8)
.220"-.660"
(5.6-16.8)
.220"-.660"
(5.6-16.8)
.220"-.660"
(5.6-16.8)
.230"-.360"
(5.8-9.1)
.230"-.360"
(5.8-9.1)
Catalog Numbers
HBL5965VY
HBL5364VY
HBL5965VBLK
HBL5364VBK
HBL5965VGY
–
HBL515PVO
–
HBL5966VBLK
–
HBL5966VY
–
Notes: Horsepower ratings listed are AC only.
*Watertight plugs IP55 suitability when installed and used properly with mating Elastogrip
watertight connector bodies.
See page A-45 for accessories.
(1) UL Component Listed only. Not for general use applications.
www.hubbell-wiring.com
Dimensions in Inches (mm)
15 and 20 Ampere, 125 Volts
2 Pole, 3 Wire Grounding
Insulgrip®, Elastogrip® and Valise® Connector Bodies
IP20
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
SUITABILITY
Connector Bodies
20A 125V
NEMA 5-20R
UL CSA
1 HP
Insulgrip®
Description
Black and white nylon.
Black nylon extra large cord clamp.
Corrosion resistant yellow nylon.
2.78"
(70.6 )
1.41"
(35.6 )
1.53"
(38.9)
Cord Diameter
.230"-.720"
(5.8-18.3)
.360"-.720"
(9.1-18.3)
.230"-.720"
(5.8-18.3)
Catalog Numbers
HBL5269C
HBL5369C
HBL5269EBK
HBL5369EBK
HBL52CM69C
HBL53CM69C
Straight Blade Devices
Straight Blade Devices
HBL5269C
4.00"
(101.6)
Notes: See page A-45 for accessories.
1.61"
(40.9)
IP20 and IP55
Elastogrip®
Description
Yellow elastomer, dust tight.
Yellow elastomer, watertight.
SUITABILITY
Cord Diameter
.300"-.655"
(7.6-16.6)
.300"-.655"
(7.6-16.6)
HBL1547
Catalog Numbers
HBL1547
HBL1533
3.00"
(76.2)
HBL15W47*
HBL15W33*
1.61"
(40.9)
IP20
Valise®
Description
Yellow nylon.
Black nylon.
Gray nylon.
Cord Diameter
.220"-.660"
(5.6-16.8)
.220"-.660"
(5.6-16.8)
.220"-.660"
(5.6-16.8)
.220"-.660"
(5.6-16.8)
.230"-.360"
(5.8-9.1)
.230"-.360"
(5.8-9.1)
Catalog Numbers
HBL5969VY
HBL5369VY
2.63"
(66.8)
HBL5969VBLK
HBL5369VBK
HBL5969VGY
–
HBL515CVO
–
1.25"
(31.8)
1.13"
(28.7)
HBL5969VY
HBL5963VBK
–
HBL5963VY
–
1.25"
(31.8)
2.25"
(57.2)
Notes: Connector bodies are not HP rated.
*Watertight connectors IP55 suitability when closure plug inserted or when installed
and used properly with mating Elastogrip watertight plug.
See page A-45 for accessories.
1.17"
(29.7)
HBL5963VY
Dimensions in Inches (mm)
www.hubbell-wiring.com
A-27
15 and 20 Ampere, 125 Volts
Orange nylon, sold in bulk
pack of 50.
Insulation displacement
terminals, black nylon.
Insulation displacement
terminals, yellow nylon.
HBL15W47
SUITABILITY
Straight Blade Devices
Straight Blade Devices
15 and 20 Ampere, 125 Volts
2 Pole, 3 Wire Grounding
Insulgrip® Flanged Inlets and Receptacles
G
2.56"
(65.0)
2.19"
(55.6)
Flanged Inlets
.16" (4.1)
Dia.
1.72"
(43.7)
1.72"
(43.7)
HBL5278C
2.25"
(57.2)
.39"(9.9)
Dia.
2.88"
(73.2)
1.88"
(47.8)
2.66"
(67.6)
G
W
.19" (4.8) Dia.
4 Holes
W
15A 125V
NEMA 5-15P
UL CSA
20A 125V
NEMA 5-20P
UL CSA
Description
Catalog Numbers
Nylon casing, back wired.
HBL5278C
Weatherproof, gray, with lift cover and multiple
drive screws.
HBL61CM64
Weatherproof, black, with lift cover and boot,
multiple drive screws.
HBL61CM64BK
–
Stainless steel flange, phenolic body,
miniature style, for molded on connectors only,
multiple drive screws.
HBL5240*
–
HBL5378C
Notes: *Specially designed to accept “molded-on" connector bodies. Catalog number HBL5240
will not accept re-wireable size connector bodies listed in this catalog or molded
connectors having a “rejection obstruction" as required by Underwriters Laboratories Inc.
standard #817 cord sets and power supply cords" effective 7/1/81.
See page A-45 for accessories.
1.56"
(39.6)
HBL61CM64
G
G
W
W
2.56"
(65.0)
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
2.19"
(55.6)
Flanged Receptacles
.16" (4.1)
Dia.
1.72"
(43.7)
1.72"
(43.7)
HBL5279C
1.47"
(37.3)
2.06"
(52.3)
Description
Catalog Numbers
Nylon casing, back wired.
HBL5279C
Stainless steel flange, phenolic body,
covered terminals, multiple drive screws.
HBL5279
–
Stainless steel flange, brown phenolic
(mounting screws packed separately).
HBL5256
–
Weatherproof, gray nylon, with lift cover and boot,
multiple drive screws.
.20" Dia.
(5.1)
15 and 20 Ampere, 125 Volts
20A 125V
NEMA 5-20R
UL CSA
1 HP
–
HBL5379C
HBL61CM65*
Notes: *Not CSA Certified.
See page A-45 for accessories.
1.09"
(27.7)
HBL5256
2.25"
(57.2)
.39"(9.9)
Dia.
2.88"
(73.2)
1.88"
(47.8)
.19" (4.8) Dia.
4 Holes
2.66"
(67.6)
1.56"
(39.6)
HBL61CM65
A-28
www.hubbell-wiring.com
Dimensions in Inches (mm)
15 and 20 Ampere, 250 Volts
2 Pole, 3 Wire Grounding
HBL® Extra Heavy Duty, Specification Grade Receptacles
1.65"
(41.9)
G
15A 250V
NEMA 6-15R
UL CSA
1.5 HP
Receptacles
G
20A 250V
NEMA 6-20R
UL CSA
2 HP
3.28"
(83.3)
2.72"
(69.1)
Straight Blade Devices
Straight Blade Devices
HBL® Extra Heavy Duty, Specification Grade, Duplex
Description
Flush, nylon face,
back and side wired,
multiple drive screws.
Isolated ground.(1)
Color
Black
Brown
Gray
Ivory
Red
Orange
Catalog Numbers
–
HBL5662
–
HBL5662I
–
IG5662
HBL5462BK
HBL5462
HBL5462GY
HBL5462I
HBL5462R
IG5462
HBL® Extra Heavy Duty, Specification Grade, Single
Description
Flush, nylon face, back & side wired.
Isolated ground.(1)
Panel mount 1.94 in. (49.3) centers.
Ring terminal connection.
Color
Brown
Ivory
Orange
Brown
Brown
Catalog Numbers
HBL5661
HBL5461
HBL5661I
HBL5461I
IG5661
IG5461
HBL5684
–
HBL5661RT
–
.96"
(24.4)
HBL5662I
1.65"
(41.9)
3.28"
(83.3)
2.72"
(69.1)
.96"
(24.4)
HBL5462I
1.19”
(30.2)
1.94"
(49.3)
HBL® Extra Heavy Duty, Specification Grade
Duplex and Panel Mount, Single
Description
Flush, nylon face, side wired only.
Panel mount 1.75 in. (44.5) centers.
Color
Brown
Ivory
Brown
Catalog Numbers
HBL5652
HBL5652I
HBL5658
–
–
–
1.39"
(35.3)
1.63"
(41.4 )
Notes: HP ratings are AC only.
See page A-44 for accessories.
(1) See Section J for full line of isolated ground devices.
HBL5661
1.94"
(49.3)
1.39"
(35.3)
.875"
(22.2)
HBL5684
1.47"
(35.3)
1.75" 1.39"
(44.5) (35.3)
#8-32
Tap
Dimensions in Inches (mm)
www.hubbell-wiring.com
1.13"
(28.7)
HBL5658
A-29
15 and 20 Ampere, 250 Volts
1.63"
(41.4 )
Straight Blade Devices
Straight Blade Devices
15 and 20 Ampere, 250 Volts
2 Pole, 3 Wire Grounding
Insulgrip® Plugs and Flanged Inlets
G
1.97"
(50.0)
15A 250V
NEMA 6-15P
UL CSA
1.5 HP
Plugs
1.53"
(38.9)
HBL5666C
1.22"
(30.9)
G
20A 250V
NEMA 6-20P
UL CSA
2 HP
15 and 20 Ampere
Description
Cord Diameter
Catalog Numbers
Insulgrip® Plug, black and
white nylon.
.230"-.720"
(5.8-18.3)
HBL5666C
HBL5466C
Insulgrip® Plug, corrosion resistant,
yellow nylon.
.230"-.720"
(5.8-18.3)
HBL56CM66C
HBL54CM66C
8-Position Insulgrip® Angle Plug,
black and white nylon.
.325"-.655"
(8.3-16.6)
HBL5666CA
HBL5466CA
Valise® Plug, yellow nylon.
.220"-.660"
(5.6-16.8)
HBL5666VY
HBL5464VY
Note: See page A-45 for accessories.
2.11"
(53.6)
1.53"
(38.9)
15 and 20 Ampere, 125 Volts Plugs and Flanged Inlets
HBL5666CA
G
1.88"
(47.8)
1.5"
(38.1)
1.13"
(28.7)
Insulgrip® Flanged Inlets
G
15A 250V
NEMA 6-15P
UL CSA
20A 250V
NEMA 6-20P
UL CSA
Description
Catalog Numbers
Nylon casing, back wired.
HBL5678C
HBL5478C
Notes: Flanged inlets are not HP rated.
See page A-45 for accessories.
HBL5666VY
2.56"
(65.0)
2.19"
(55.6)
.16" (4.1)
Dia.
1.72"
(43.7)
1.72"
(43.7)
HBL5678C
A-30
www.hubbell-wiring.com
Dimensions in Inches (mm)
Straight Blade Devices
Straight Blade Devices
15 and 20 Ampere, 250 Volts
2 Pole, 3 Wire Grounding
Insulgrip® and Valise® Connector Bodies and Flanged Receptacles
G
NEMA 6-15R
15A 250V
UL CSA
Connector Bodies
G
NEMA 6-20R
20A 250V
UL Listed
Insulgrip®
2.78"
(70.6)
Description
Cord Diameter
Catalog Numbers
Insulgrip® Connector Body,
black and white nylon,
multiple drive screws.
.230"-.720"
(5.8-18.3)
HBL5669C
HBL5469C
Valise® Connector Body,
yellow nylon.
.220"-.660"
(5.6-16.8)
HBL5669VY
HBL5469VY
1.53"
(38.9)
1.41"
(35.8)
HBL5669C
Note: See page A-45 for accessories.
1.50"
(38.1)
1.13"
(28.7)
HBL5669VY
2.56"
(65.0)
2.19"
(55.63)
Flanged Receptacles
.16" (4.1)
Dia.
Description
Catalog Numbers
Nylon casing,
multiple drive screws.
HBL5679C
HBL5479C
1.72"
(43.7)
1.72"
(43.7)
HBL5679C
Stainless steel flange, brown phenolic
HBL5656
–
housing (mounting screws
packaged separately).
Notes: Connector bodies are not HP rated.
*Watertight connectors IP55 suitability when closure plug inserted or when installed
and used properly with mating Elastogrip watertight plug.
See page A-45 for accessories.
.20" Dia.
(5.1)
1.47"
(37.3)
2.06"
(52.3)
1.09"
(27.7)
HBL5656
Dimensions in Inches (mm)
www.hubbell-wiring.com
A-31
15 and 20 Ampere, 250 Volts Connector Bodies & Flanged Receptacles
2.63"
(66.88)
Straight Blade Devices
Straight Blade Devices
15 and 20 Ampere, 125, 250 Volts and 277 Volts AC
2 Pole, 2 Wire Non-Grounding and 2 Pole, 3 Wire Grounding
Plugs, Connector Bodies and Receptacles
1.68"
(42.7)
W
1.25"
(31.8)
.88"
(22.4)
HBL5865VY
SUITABILITY
Description
Yellow nylon, non-polarized.
2.38"
(60.5)
15A and 20A, 125V, 250V and 277V AC Plugs, Connector Bodies & Receptacles
IP20
15A, 125V
2 Pole, 2 Wire
Valise® Plugs
1.25"
(31.8)
.88"
(22.4)
Yellow nylon, polarized.
W
15A 125V
NEMA 1-15P
UL CSA
0.5 HP
15A 125V
NEMA 1-15R
UL CSA
0.5 HP
Cord Diameter
.218"-.385"
(5.5-9.8)
.218"-.385"
(5.5-9.8)
Catalog Numbers
–
HBL5865VY
Cord Diameter
.218"-.385"
(5.5-9.8)
Catalog Numbers
HBL5869VY
–
HBL5866VY
Valise® Connector Bodies
HBL5869VY
Description
Yellow nylon.
–
2.63"
(66.8)
3.28"
(83.3)
G
G
W
1.33"
(33.8)
1.19"
(30.2)
HBL5302
W
15A 277V AC
NEMA 7-15P
2 HP
15A 277V AC
NEMA 7-15R
UL CSA
2 HP
15A, 277V
2 Pole, 3 Wire
Plug
Description
Finger grip, black elastomer.
Cord Diameter
.312"-.468"
(7.9-11.9)
Catalog Numbers
–
HBL5929*
Receptacle, Duplex
1.50"
(38.1)
Description
Flush, brown, back & side wired.
1.63"
(41.4)
HBL5929
Catalog Numbers
HBL5302
–
Notes: Horsepower ratings are AC only.
*Not UL listed.
See page A-44 for accessories.
1.50"
(38.1)
1.88"
(47.8)
HBL9758VY
IP20
20A, 250V
2 Pole, 2 Wire
Valise® Plugs
SUITABILITY
Description
Yellow nylon.
Cord Diameter
.220"-.660"
(5.6-16.8)
20A 250V
NEMA 2-20R
UL Listed
2 HP
20A 250V
NEMA 2-20P
UL Listed
2 HP
Catalog Numbers
–
HBL9758VY
Receptacle, Single
3.28" 1.39"
(83.3) (35.3)
1.14"
(29.0)
Description
Catalog Numbers
Black phenolic.
HBL5552B
Notes: Horsepower ratings are AC only and apply to plugs and receptacles only.
See page A-44 for accessories.
–
HBL5552B
A-32
www.hubbell-wiring.com
Dimensions in Inches (mm)
Straight Blade Devices
Straight Blade Devices
20 Ampere, 125/250 Volts and 3Ø 250 Volts AC
3 Pole, 3 Wire Non-Grounding; 3 Pole, 4 Wire Grounding; 4 Pole 4 Wire Non-Grounding
Receptacles and Plugs
W
20A, 125/250V
3 Pole, 3 Wire Non-Grounding
Receptacles and Plugs
Description
Receptacle, black phenolic.
Plug, Insulgrip®, nylon.
X
X
IP20
Y
20A 125V/250V
NEMA 10-20R
UL Listed
2(1) HP
SUITABILITY
3.28" 1.39"
(83.3) (35.3)
W
Y
20A 125V/250V
NEMA 10-20P
UL Listed
2(1) HP
.97"
(24.6)
HBL6810
Cord Diameter
–
.385"-.780"
(9.8-19.8)
Catalog Numbers
HBL6810
–
–
HBL9977C
2.50"
(63.5)
1.94"
(49.2)
Notes: Horsepower ratings listed above are AC only.
Horsepower ratings not in parentheses are phase to phase (208 to 240V AC).
Those in parentheses are phase to neutral (120V AC).
See page A-44 for accessories.
HBL9977C
G
20A, 125/250V
3 Pole, 4 Wire Grounding
Receptacles and Plugs
Description
Receptacle, black nylon body,
back & side wired.
Plug, nylon, angle 4-position.
X
IP20
SUITABILITY
Cord Diameter
–
.390"-.775"
(9.9-19.7)
X
Y
W
W
20A 125V/250V
NEMA 14-20R
UL CSA
2(1) HP
20A 125V/250V
NEMA 14-20P
UL CSA
2(1) HP
Catalog Numbers
HBL8410
–
2.38"
(60.5) 1.39"
(35.3)
–
1.19"
(30.2)
HBL8411C
HBL8410
Note: See page A-44 for accessories.
2.34"
(59.4)
G
20A, 3Ø 250V AC
3 Pole, 4 Wire Grounding
Receptacles and Plugs
Description
Receptacle, black nylon body,
back & side wired.
Plug, nylon, angle 4-position.
Cord Diameter
–
.390"-.775"
(9.9-19.7)
Z
X
IP20
SUITABILITY
1.61"
(40.9)
G
Z
X
3.64"
(92.5)
Y
Y
20A 3Ø 250V AC
NEMA 15-20R
UL CSA
3 HP
20A 3Ø 250V AC
NEMA 15-20P
UL CSA
3 HP
Catalog Numbers
HBL8420
–
HBL8411C
–
HBL8421C
Notes: See page A-44 for accessories.
Horsepower ratings listed above are AC only.
Horsepower ratings not in parentheses are phase to phase (208 to 240V AC).
Horsepower ratings in parentheses are phase to neutral (120V AC).
2.38"
(60.5) 1.39"
(35.3)
20A, 3ØY 120/208V AC
4 Pole, 4 Wire Non-Grounding
Receptacles and Plugs
IP20
SUITABILITY
X
Z
X
Y
Y
20A 3ØY 120/208V AC
NEMA 18-20R
UL Listed
2 HP
20A 3ØY 120/208V AC
NEMA 18-20P
UL Listed
2 HP
Description
Receptacle, black nylon body.
Plug, nylon, angle, 4-position.
Cord Diameter
Catalog Numbers
–
HBL7250
–
.390"-.775"
–
HBL7251C
(9.9-19.7)
Notes: Horsepower ratings are phase to phase (208 to 240V AC).
Weatherproof boots for plugs not available.
See page A-44 for accessories.
Dimensions in Inches (mm)
1.19"
(30.2)
W
W
Z
www.hubbell-wiring.com
HBL7250
2.34"
(59.4)
1.61"
(40.9)
3.64"
(92.5)
HBL7251C
A-33
20A, 125/250V, 3Ø 250V AC, and 3ØY 120/208V AC Receptacles & Plugs
G
Y
Straight Blade Devices
Straight Blade Devices
16 Ampere, 250 Volts AC International
2 Pole, 3 Wire Grounding
20 Ampere, 250 Volts AC North American Rated
IEC 320 Appliance Couplers
1.52"
(38.6)
2.75"
(69.9)
IP20
1.36"
(34.5)
SUITABILITY
Plug IEC 320 Compatible
Description
20/16A 250V AC IEC straight blade.
Catalog Numbers
H320P
H320P
.22"
(5.6)
1.47"
(37.3)
1.19"
(30.2)
1.28"
(32.5)
1.64"
(41.7)
Inlets
Description
20/16A 250V AC IEC straight blade.
20/16A 250V AC IEC straight blade with retention clamp.
H320B
Catalog Numbers
H320B
H320BL
1.28"
(32.5)
1.47"
1.19" (37.3)
(30.2)
.22"
(5.6)
Connector
H320BL
Description
20/16A 250V AC IEC straight blade.
SUITABILITY
Catalog Numbers
H320C
1.42"
(36.1)
1.95"
(49.5)
16 Ampere, 250 Volts AC International
IP20
1.64"
(41.7)
.41"
(10.4)
H320C
Receptacle IEC 320 Compatible
1.55"
(39.4)
1.41"
(35.8)
1.52"
(38.6)
Description
20/16A 250V AC IEC straight blade.
For Ring Terminal connection.
Note: See page A-59 for technical information.
†Not UL Listed.
Catalog Numbers
H320R
H320RRT†
1.89"
(48.0)
H320R
A-34
www.hubbell-wiring.com
Dimensions in Inches (mm)
Straight Blade Devices
Straight Blade Devices
15 and 20 Ampere, 125 and 250 Volts
2 Pole, 3 Wire Grounding
Hazardous Location Receptacles, Plugs, Boxes and Accessories
G
3.00"
(76.2)
W
Acceptor®
Hazardous Location Receptacles
20A 125V
NEMA 5-20R
UL CSA
4.62"
(117.3)
Description
Catalog Numbers
Explosion and dust ignition proof.
UGRO20231
Class I, Div. 1 & 2, Groups C, D
UGRA20231*
Class II, Div. 1 & 2, Groups F, G
Class III
NEMA® 3, 7 B C D, 9 F G
*UGRA version includes an adapter plate for mounting to Crouse-Hinds® EDS series and
Appleton® EFD series back boxes. UL Listed for Class 1, Div. 2, Groups B, C, D.
G
W
Acceptor
Hazardous Location Plugs
Description
Explosion and dust ignition proof.
Class I, Div. 1 & 2, Groups B, C, D
Class II, Div. 1 & 2, Groups E, F, G
Class III
NEMA® 3, 7 B C D, 9 F G
15A 125V
NEMA 5-15P
UL CSA
UGRO20231
G
2.55"
(64.8)
W
20A 125V
NEMA 5-20P
UL CSA
Catalog Numbers
UGP15231
UGP20231
1.51"
(38.4)
1.69"
(42.9)
UGP15231
3.00"
(76.2)
2.25"
(57.2)
SWB Series Boxes
Hub Size
Catalog Numbers
1-Gang
Dead End
SWB1
SWB2
4.63"
(117.6)
1-Gang
Feed Thru
SWB4
SWB5
SWB1
3.00"
(76.2)
2.25"
(57.2)
4.63"
(117.6)
SWB5
NEMA® is a registered trademark of the National Electrical Manufacturers Association.
Dimensions in Inches (mm)
www.hubbell-wiring.com
A-35
Hazardous Location Devices
½ in. N.P.T
¾ in. N.P.T.
Class I, Div. 1 & 2, Groups C, D
Class II, Div. 1 & 2, Groups E, F, G
Class III
NEMA® 7 C D, 9 E F G
Note: SWB series boxes will only accommodate Acceptor Series receptacles, not standard
weatherproof covers.
Straight Blade Devices
Straight Blade Devices
Heavy Duty Insulgrip®
30, 50, 60 Amp
Plugs and Receptacles
Heavy duty cable grips handle a wide range
of cable sizes to prevent conductor movement that can cause strain on the terminals.
Neoprene dust shields fit a variety of cable
diameters to provide a reliable seal to keep
dust out.
Supertough nylon housing provides high impact resistance.
Gripping ribs provide secure gripping area.
Reinforced thermoplastic polyester provides high impact and heat resistance.
Captive Allen head terminal screws are user-ready.
Catalog number, NEMA number, ratings and certifications molded in face.
Plated steel mounting plate provides corrosion resistance. Unit mounts in a 2-gang box.
Heavy Duty Insulgrip®
One piece design power and ground contacts provide low operating temperatures.
Sequenced contacts assure protection for people and equipment.
Catalog number, NEMA number, ratings and certifications molded in face.
Four-wire receptacles: Floating “V” bottom contact lugs bundle strands to provide high
contact pressure and low operating temperatures.
Captive Allen head terminal screws permit high torque and clamping pressure required
for larger size conductors. User-ready.
A-36
www.hubbell-wiring.com
Dimensions in Inches (mm)
30 Ampere, 125, 250 Volts, 277 Volts AC and 125/250 Volts
2 Pole, 3 Wire Grounding and 3 Pole, 3 Wire Non-Grounding
Single Receptacles and Plugs
G
IP20
SUITABILITY
30A, 125V
2 Pole, 3 Wire Grounding
Receptacles and Plugs
30A 125V
NEMA 5-30R
UL CSA
2 HP
Description
Receptacle, black RTP.
Receptacle, orange, isolated ground.(1)
Plug, nylon, angle, 4-position.
Cord Diameter
–
–
.625"-1.187"
(15.9-30.1)
G
W
W
1.79"
(45.64)
30A 125V
NEMA 5-30P
UL CSA
2 HP
Catalog Numbers
HBL9308
–
IG9308
–
–
HBL9309*
2.38" 2.12"
(60.33) (53.84)
G
G
IP20
2.35"
(59.93)
SUITABILITY
30A, 250V
2 Pole, 3 Wire Grounding
Receptacles and Plugs
30A 250V
NEMA 6-30R
UL CSA
2 HP
Description
Receptacle, black RTP.
Receptacle, orange, isolated ground.(1)
Plug, nylon, angle, 4-position
Catalog Numbers
HBL9330
–
.625"-1.187"
(15.9-30.1)
IG9330
–
Cord Diameter
–
.625"-1.187"
(15.9-30.1)
IP20
30A, 125/250V
3 Pole, 3 Wire Non-Grounding
Receptacles and Plugs
Description
Receptacle, black phenolic.
Receptacle, surface mount
aluminum housing.
Plug, Insulgrip®, nylon.
Y
W
W
X
X
30A 125/250V
NEMA 10-30R
UL Listed
2(2) HP
IG9308
2.75"
(69.9)
Y
30A 125/250V
NEMA 10-30P
UL Listed
2(2) HP
1.88"
(47.8)
4.33"
(110.0)
HBL9331
HBL9337C
HBL9333
2.50"
(63.5)
2.75"
(69.9)
2.13"
(54.1)
5.06"
(128.5)
1.88"
(47.8)
4.33"
(110.0)
1.81"
(45.97)
W
Catalog Numbers
HBL9350
–
HBL9395
–
.625"-1.00"
–
(15.9-25.4)
Plug, nylon, angle, 4-position.
.625"-1.187"
–
(15.9-30.1)
Notes: (1) See Section J for complete line of isolated ground devices.
*Not Fed. Spec. Listed.
See page A-46 for accessories.
3.68"
2.12" (93.47)
(53.8)
30A 277V AC
NEMA 7-30P
UL CSA
3 HP
Catalog Numbers
HBL9315
–
–
HBL9319*
SUITABILITY
Cord Diameter
–
–
3.28"
(83.30)
2.50" 2.09"
(63.5) (53.1)
1.69"
(42.9)
HBL9333
Dimensions in Inches (mm)
HBL9350
www.hubbell-wiring.com
2.06
(52.
HBL9395
A-37
30 Ampere, 125, 250 Volts and 277 Volts AC and 125/250 Volts
W
2.25"
(57.15)
–
HBL9331*
G
30A 277V AC
NEMA 7-30R
UL CSA
3 HP
Description
Receptacle, black RTP.
Plug, nylon, angle, 4-position.
–
G
SUITABILITY
HBL9308
30A 250V
NEMA 6-30P
UL CSA
2 HP
Cord Diameter
–
IP20
30A, 277V
2 Pole, 3 Wire Grounding
Receptacles and Plugs
Straight Blade Devices
Straight Blade Devices
Straight Blade Devices
Straight Blade Devices
30 Ampere, 125/250 Volts, 3Ø 250 and 120/208 Volts AC
3 Pole, 4 Wire Grounding and 4 Pole, 4 Wire Non-Grounding
Single Receptacles and Plugs
2.75"
(69.9)
1.81"
(46.0)
1.81"
(46.0)
#6-32
TAP
3.28"
(83.3)
2.44"
(61.9)
2.37"
(60.3)
IP20
30A, 125/250V
3 Pole, 4 Wire Grounding
Receptacles and Plugs
G
Y
SUITABILITY
G
X
X
W
30A 125/250V
NEMA 14-30R
2(2) HP
30A 125/250V
NEMA 14-30P
2(2) HP
Description
Cord Diameter
Catalog Numbers
Receptacle, black RTP.
Plug, nylon.
–
.625"-1.310"
(15.9-33.3)
.625"-1.310"
(15.9-33.3)
HBL9430A
–
Plug, nylon, angle, 4-position.
Y
W
–
–
HBL9431C
HBL9432C
HBL9430A
G
IP20
2.88"
(73.2)
4.13"
(104.9)
30 Ampere, 125/250 Volts, 3Ø 250 and 120/208 Volts AC
HBL9431C
SUITABILITY
30A, 3Ø 250V AC
3 Pole, 4 Wire Grounding
Receptacles and Plugs
Description
Receptacle, black RTP.
Plug, nylon.
Plug, nylon, angle, 4-position
3.38"
(85.8)
Cord Diameter
–
.625"-1.310"
(15.9-33.3)
.625"-1.310"
(15.9-33.3)
G
X
Z
X
Z
Y
Y
30A 3Ø 250V AC
NEMA 15-30R
3 HP
30A 3Ø 250V AC
NEMA 15-30P
3 HP
Catalog Numbers
HBL8430A
–
–
HBL8431C
–
HBL8432C
4.5"
(114.3)
IP20
HBL9432C
#6-32
TAP
2.37"
(60.2)
SUITABILITY
30A, 3ØY 120/208V AC
4 Pole, 4 Wire Non-Grounding
Receptacles and Plugs
Description
Receptacle, black RTP.
Plug, nylon.
2.75"
(69.9)
1.81"
(46.0)
W
Z
W
X
Y
30A 3ØY
120/208V AC
NEMA 18-30R
UL Listed
3 HP
Cord Diameter
–
.625"-1.310"
(15.9-33.3)
X
Z
Y
30A 3ØY
120/208V AC
NEMA 18-30P
UL Listed
3 HP
Catalog Numbers
HBL8330A
–
–
HBL8331C
Note: See page A-47 for accessories.
2.44"
(61.9)
2.37" 3.28"
(60.3) (83.3)
HBL8330A
4.13"
(104.9)
2.88"
(73.2)
HBL8331C
A-38
www.hubbell-wiring.com
Dimensions in Inches (mm)
50 Ampere, 125, 250 Volts, 277 Volts AC and 125/250 Volts
2 Pole, 3 Wire Grounding and 3 Pole, 3 Wire Non-Grounding
Single Receptacles and Plugs
G
IP20
W
2.75"
(69.9)
SUITABILITY
50A, 125V
2 Pole, 3 Wire Grounding
Receptacles and Plugs
Description
G
W
50A 125V
NEMA 5-50R
UL CSA
2 HP
Cord Diameter
Receptacle, black RTP.
Plug, nylon, angle, 4-position.
–
.625"-1.187"
(15.9-30.2)
Note: *For dimensions, see HBL9308 on page A-37.
50A 125V
NEMA 5-50P
UL CSA
2 HP
4.33"
(110.0)
Catalog Numbers
HBL9360*
–
–
HBL9361
Straight Blade Devices
Straight Blade Devices
1.88"
(47.8)
HBL9361
G
G
IP20
50A, 250V
2 Pole, 3 Wire Grounding
Receptacles and Plugs
Description
Receptacle, black RTP.
Plug, nylon, angle, 4-position.
SUITABILITY
50A 250V
NEMA 6-50R
UL CSA
3 HP
Cord Diameter
–
.625"-1.187"
(15.9-30.2)
50A 250V
NEMA 6-50P
UL CSA
3 HP
Catalog Numbers
HBL9367
–
–
HBL9368
G
IP20
Description
Receptacle, black RTP.
Plug, nylon, angle, 4-position.
W
SUITABILITY
50A 277V AC
NEMA 7-50R
UL CSA
5 HP
Cord Diameter
–
.625"-1.187"
(15.9-30.2)
IP20
Description
Receptacle, black phenolic.
Receptacle, surface mount
aluminum housing.
Connector body,
Insulgrip, nylon.
Plug, Insulgrip, nylon.
Plug, nylon, angle, 4-position.
–
–
.625"-1.218"
(15.9-30.9)
.625"-1.218"
(15.9-30.9)
.625"-1.187"
(15.9-30.2)
50A 277V AC
NEMA 7-50P
UL CSA
5 HP
2.50"
(63.5)
2.13"
(54.1)
5.06"
(128.5)
W
W
Y
X
X
50A 125/250V
NEMA 10-50P
UL Listed
3(2) HP
Cord Diameter
HBL7962
W
Catalog Numbers
HBL9365
–
–
HBL9379
SUITABILITY
50A, 125/250V
3 Pole, 3 Wire Non-Grounding
Receptacles, Connector Body and Plugs
1.69"
(42.9)
G
Y
50A 125/250V
NEMA 10-50P
UL Listed
3(2) HP
Catalog Numbers
HBL7962
HBL7940
–
–
HBL7515C
–
–
HBL7513C
–
HBL7977
2.06"
(52.3)
HBL9395
Representative of surface
mount receptacle
2.88"
(73.2)
5.75"
(146.1)
HBL7515C
Note: See page A-46 for accessories.
2.88"
(73.2)
4.13"
(104.9)
HBL7513C
Dimensions in Inches (mm)
www.hubbell-wiring.com
A-39
50 Ampere, 125, 250 Volts, 277 Volts AC and 125/250 Volts
50A, 277V AC
2 Pole, 3 Wire Grounding
Receptacles and Plugs
2.50" 2.09"
(63.5) (53.1)
Straight Blade Devices
Straight Blade Devices
50 Ampere, 125/250 Volts, 3Ø 250 and 120/208 Volts AC
3 Pole, 4 Wire Grounding and 4 Pole, 4 Wire Non-Grounding
Single Receptacles and Plugs
G
G
2.75"
(69.9)
1.81"
(46.0)
1.81"
(46.0)
#6-32
TAP
3.28"
(83.3)
2.37"
(60.3)
2.44"
(61.9)
Y
IP20
50A, 125/250V
3 Pole, 4 Wire Grounding
Receptacles and Plugs
X
X
W
50A 125/250V
NEMA 14-50R
UL CSA
3(2) HP
50A 125/250V
NEMA 14-50P
UL CSA
3(2) HP
SUITABILITY
Description
Cord Diameter
Catalog Numbers
Receptacle, black RTP.
Plug, nylon.
–
.625"-1.310"
(15.9-33.3)
.625"-1.310"
(15.9-33.3)
HBL9450A
–
Plug, nylon, angle, 4-position.
Y
W
–
–
HBL9451C
HBL9452C
HBL9450A
G
2.88"
(73.2)
4.13"
(104.9)
50 Ampere, 125/250 Volts, 3Ø 250 and 120/208 Volts AC
HBL9451C
Description
Receptacle, black RTP.
Plug, nylon.
Plug, nylon, angle, 4-position.
3.38"
(85.8)
IP20
50A, 3Ø 250V AC
3 Pole, 4 Wire Grounding
Receptacles and Plugs
Z
X
Y
SUITABILITY
50A 3Ø 250V AC
NEMA 15-50R
UL CSA
7.5 HP
Cord Diameter
–
.625"-1.310"
(15.9-33.3)
.625"-1.310"
(15.9-33.3)
G
X
Z
Y
50A 3Ø 250V AC
NEMA 15-50P
UL CSA
7.5 HP
Catalog Numbers
HBL8450A
–
–
HBL8451C
–
HBL8452C
4.5"
(114.3)
W
IP20
2.38"
(60.5)
50A, 3ØY 120/208V AC
4 Pole, 4 Wire Non-Grounding
Receptacles and Plugs
2.75"
(69.9)
1.81"
(46.0)
1.81"
(46.0)
#6-32
TAP
3.28"
(83.3)
2.37"
(60.3)
2.44"
(61.9)
Description
Receptacle, black RTP.
Plug, nylon, angle, 4-position.
X
Y
SUITABILITY
HBL9452C
W
Z
50A 3ØY
120/208V AC
NEMA 18-50R
UL Listed
7.5 HP
Cord Diameter
–
.625"-1.310"
(15.9-33.3)
X
Z
Y
50A 3ØY
120/208V AC
NEMA 18-50P
UL Listed
7.5 HP
Catalog Numbers
HBL8350A
–
–
HBL8352C
Notes: See page A-47 for accessories.
RTP is an abbreviation for reinforced thermoplastic polyester.
HBL8350A
A-40
www.hubbell-wiring.com
Dimensions in Inches (mm)
Straight Blade Devices
Straight Blade Devices
60 Ampere, 125/250 Volts, 3Ø 250 and 120/208 Volts AC
3 Pole, 4 Wire Grounding and 4 Pole, 4 Wire Non-Grounding
Single Receptacles and Plugs
G
G
60A, 125/250V
3 Pole, 4 Wire Grounding
Receptacles and Plugs
Z
IP20
X
X
W
60A 125/250V
NEMA 14-60R
UL CSA
3(2) HP
60A 125/250V
NEMA 14-60P
UL CSA
3(2) HP
SUITABILITY
Description
Cord Diameter
Catalog Numbers
Receptacle, black RTP.
Plug, nylon.
–
.625"-1.310"
(15.9-33.3)
.625"-1.310"
(15.9-33.3)
HBL9460A
–
Plug, nylon, angle, 4-position.
Z
W
–
–
HBL9461C
Description
Receptacle, black RTP.
Plug, nylon.
HBL9461C
IP20
X
Y
60A 3Ø 250V AC
NEMA 15-60P
UL CSA
10 HP
Catalog Numbers
HBL8460A
–
–
HBL8461C
–
Receptacle, black RTP.
Plug, nylon.
Plug, nylon, angle, 4-position.
–
.625"-1.310"
(15.9-33.3)
.625"-1.310"
(15.9-33.3)
2.38"
(60.5)
W
Z
X
X
2.75"
(69.9)
Z
Y
Y
60A 3ØY
120/208V AC
NEMA 18-60R
UL Listed
7.5 HP
60A 3ØY
120/208V AC
NEMA 18-60P
UL Listed
7.5 HP
SUITABILITY
Cord Diameter
4.5"
(114.3)
HBL8462C
W
Description
3.38"
(85.8)
HBL9462C
IP20
60A, 3ØY 120/208V AC
4 Pole, 4 Wire Non-Grounding
Receptacles and Plugs
Z
Y
60A 3Ø 250V AC
NEMA 15-60R
UL CSA
10 HP
SUITABILITY
Cord Diameter
–
.625"-1.310"
(15.9-33.3)
.625"-1.310"
(15.9-33.3)
G
X
Z
#6-32
TAP
3.28"
(83.3)
2.37"
(60.3)
Catalog Numbers
HBL7301A
–
–
–
HBL7303C
1.81"
(46.0)
1.81"
(46.0)
2.44"
(61.9)
HBL7302C
HBL7301A
Note: See page A-47 for accessories.
RTP is an abbreviation for reinforced thermoplastic polyester.
Dimensions in Inches (mm)
www.hubbell-wiring.com
A-41
60 Ampere, 125/250 Volts, 3Ø 250 and 120/208 Volts AC
Plug, nylon, angle, 4-position.
4.13"
(104.9)
HBL9462C
G
60A, 3Ø 250V AC
3 Pole, 4 Wire Grounding
Receptacles and Plugs
2.88"
(73.2)
Straight Blade Devices
Straight Blade Devices
DIN Rail Utility Box
15 & 20 Ampere
Complete Units and Component Parts
Hubbell's DIN Rail Utility Box offers a labor saving way to provide utility power to any control cabinet. Installing the DIN
Rail Utility Box is as easy as snapping the box onto a 35mm DIN Rail and connecting the line, neutral and ground wires
to the terminal block. Utility power for fans, lights, laptop computers, testers or any other power requirement. If load
limiting is a concern, Hubbell's "CB" version comes with a 5 Amp circuit breaker that provides over-current protection to
make sure that large loads are not drawn from the DIN Rail Utility Box. All Hubbell DIN Rail Utility Boxes may be mounted
either vertically or horizontally on the DIN Rail; the "H" version comes with the terminal block mounted for easy wiring
when the DIN Rail Utility Box is mounted horizontally.
3.31"
(84.1)
15A 125V
NEMA 5-15R
UL CSA
0.5 HP
Duplex Receptacles
2.54"
(64.5)
4.97"
(126.2)
Description
Complete unit
Complete unit, horizontal mount
Complete unit with 5A circuit breaker
Complete unit with 5A circuit breaker, horizontal
Complete unit with aux
Complete unit with aux and 5A circuit breaker
Complete unit with NEMA® 6-15R duplex (250V)
Color
Gray
Gray
Gray
Gray
Gray
Gray
Gray
Catalog Numbers
DRUB15
DRUB15H
DRUB15CB5
DRUB15HCB5
–
–
–
20A 125V
NEMA 5-20R
UL CSA
1 HP
DRUB20
–
–
–
DRUB20AC
DRUB20ACCB5
DRUB5462*
Notes: *DRUB5462 configuration not pictured.
NEMA® is a registered trademark of the National Electrical Manufacturers Association.
DRUB15
GFCI Duplex Receptacles
3.31"
(84.1)
2.54"
(64.5)
4.97"
(126.2)
Description
Complete unit
Complete unit, horizontal
Complete unit with 5A circuit breaker
Complete unit with 5A circuit breaker, horizontal
Complete unit with aux GFCI contacts
Complete unit, faceless with aux GFCI contacts
Color
Gray
Gray
Gray
Gray
Gray
Gray
Catalog Numbers
DRUBGFI15
DRUBGFI15H
DRUBGFI15CB5
DRUBGFI15HCB5
DRUBGFI15AC
–
Color
Gray
Catalog Numbers
DRUBTVSS15
–
Color
Gray
Catalog Numbers
DRUBIG15
–
Color
Gray
Gray
Catalog Numbers
DRUB1221AC
DRUB6404
–
–
Color
Gray
Gray
Gray
Gray
Gray
Gray
Gray
Gray
Gray
Catalog Numbers
DRUBKIT
DRUBKITCB5
DRUBKITAC
DRUBKITACCB5
KP1GY*
KP26GY*
KP720GY*
KP7GY*
KP8GY*
DRUBGFI20
–
–
–
DRUBGFI20AC
DRUBGFI20BFAC
TVSS Duplex Receptacles
Description
Complete unit
DRUBGFI15AC
Isolated Ground(1) Duplex Receptacles
3.31"
(84.1)
2.54"
(64.5)
Description
Complete unit
Toggle Switch Unit
4.97"
(126.2)
DRUBTVSS15
Description
CS1221 in complete unit with aux
Complete unit with SW/REC
DIN Rail Utility Box Components
DIN Rail Utility Box
Description
Pre-wired kit without circuit breaker
Pre-wired kit with circuit breaker
Pre-wired kit with aux
Pre-wired kit with circuit breaker and aux
Switch plate only
Rectangular opening plate only
1.60 in. opening plate only
1.40 in. opening plate only
Duplex receptacle plate only
Notes: (1) See Section J for complete line of isolated ground devices.
*UL Listed, CSA Certified.
A-42
www.hubbell-wiring.com
Dimensions in Inches (mm)
Straight Blade Devices
Straight Blade Devices
Miscellaneous and Combination Receptacles
2 Pole, 3 Wire Grounding
15 and 20 Ampere
G
W
15A 125V
NEMA 5-15R
UL CSA
Miscellaneous Receptacles
Description
Receptacle, display type, brown
phenolic, with .060 in. brass plate
and blank flush plug.
Catalog Numbers
HBL5236
Replacement receptacle for HBL5236.
HBL5236M2
Replacement threaded plug for HBL5236.
D5590401*
Receptacle, wooden floors, brown phenolic with
.060 in. brass plate, blank flush plug and box.
Receptacle, clock hanger,
brown with stainless steel plate.
Four outlet cluster, brown
phenolic, steel cover, swivel hook.
Cord grip range .296–.562 in. (7.5–14.3) cord not supplied.
Note: *Not UL Listed or CSA certified.
HBL6236
HBL5236
HBL5235
HBL9259*
HBL5235
Special Combination Duplex Receptacles
Description
15A, 125V
Brown RTP, 2 feeds, 1 return, side wired
HBL4794
Brown RTP, 2 feeds, 2 returns, side wired
Brown nylon face, 2 circuit, back and side wired
HBL4795
HBL5292
Ivory nylon face, 2 circuit, back and side wired
HBL5292I
Brown nylon face, 2 circuit, back and side wired
HBL5492
Ivory nylon face, 2 circuit, back and side wired
HBL5492I
20A, 125V
15A, 125V
Brown RTP, 2 feeds, 1 return, common ground
HBL7371
10A, 250V
15A, 125V
20A, 125V
Note: This device is not listed by Underwriters
Laboratories Inc. nor CSA certified.
Brown nylon, side and back wired
15A, 125V
15A, 250V
3.00"
(76.2)
3.69"
(93.7)
2.00"
(50.8)
HBL9259
15A, 125V
20A, 250V
Note: This device will only accept 20A
grounding plugs.
Note: RTP is an abbreviation for reinforced thermoplastic polyester.
See page A-44 for accessories.
1.50"
(38.1)
2.75"
(69.9)
3.28"
(83.3)
HBL5392
.88"
(22.4)
20A, 125V
Dimensions in Inches (mm)
www.hubbell-wiring.com
HBL5292
A-43
Miscellaneous and Combination Receptacles
Brown RTP, 1 feed, 1 return, back/side wired
Catalog Numbers
HBL4792
Straight Blade Devices
Straight Blade Devices
Accessories
For 15 and 20 Ampere, 125 and 250 Volts and 277 Volts AC Devices
Wallplates, 1-Gang
NP8I
Description
Smooth nylon.
NP7
SS7
Color
Almond
Black
Brown
Gray
Ivory
Light Almond
Office White
Orange
Red
White
Stainless steel 302/304 satin,
smooth, 1-gang.
Brass .040 in. (1.02) smooth,
1-gang
Aluminum, anodized, smooth.
Duplex
Receptacles
–
NP8BK
NP8
NP8GY
NP8I
–
NP8OW
NP8OR
NP8R
NP8W
SS8
Style Line®
Receptacles
NP26AL
NP26BK
NP26
NP26GY
NP26I
NP26LA
NP26OW
–
NP26R
NP26W
SS26
Single
Receptacles
with Face
Dia. 1.39 in.
(35.3)
–
NP7BK
NP7
NP7GY
NP7I
–
NP7OW
–
NP7R
NP7W
SS7
SB8
SB26
SB7
SA8
–
SA7
Weatherproof Covers
HBL52CM22
HBL5206WO
Description
RTP, gray, for FS/FD box mounting.
RTP, yellow, for FS/FD box mounting.
RTP, gray, for device mounting.
RTP, yellow, for device mounting.
Cast aluminum for FS/FD box mounting.
Cast aluminum for device mounting.
Duplex
Receptacles
HBL5221
HBL52CM21
HBL5222
HBL52CM22
HBL5206WO
HBL5205WO
Single
Receptacles
with Face
Dia. 1.39 in.
(35.3)
HBL7423WO
HBL74CM23WO
–
–
HBL7420
–
Accessories
Notes: All weatherproof plates are UL Listed for Wet Locations.
Those with suffix WO are listed for use with cover open, all others with
cover closed. Refer to Section K for more details on cover plates.
RTP is an abbreviation for reinforced thermoplastic polyester.
HBL7423WO
A-44
www.hubbell-wiring.com
Dimensions in Inches (mm)
Straight Blade Devices
Straight Blade Devices
Accessories
For 15 and 20 Ampere, 125 and 250 Volts and 277 Volts AC Devices
IP44
SUITABILITY
Weatherproof Covers
For Nylon Flanged Inlets & Flanged Receptacles
Description
RTP, gray, for FS/FD box mounting.
Notes: Refer to Section K for more details on cover plates.
RTP is an abbreviation for reinforced thermoplastic polyester.
Catalog Numbers
WP1
WP1
IP55*
SUITABILITY
Weatherproof Boots
Description
Seal-Tite® triple seal, black elastomer cover for Insulgrip® plugs
(HBL5266C style), when used in a cord set, and connector
bodies (HBL5269C style), when used with flanged inlets.
Same as above except yellow.
Seat-Tite® triple seal black elastomer cover for Insulgrip®
connector bodies when used in a cord set.
Same as above except yellow.
Closure plug, black.
Closure plug, yellow.
Catalog Numbers
HBL6017
HBL6017
HBL60CM17
HBL6018
HBL6018
HBL60CM18
HBL6019
HBL60CM19
Notes: Boots are not UL Listed or CSA Certified.
*IP55 when installed and used properly with mating components.
HBL60CM19
Shown with HBL6018
3.14"
(79.8)
PLUGOUT® Device
Description
Electrical plug lockout devices for 15 and 20A straight blade plugs.
PLUGOUT® Lockout device for 20 & 30A Hubbell plugs and others.
Notes: See Section U for complete details on lockout devices.
**Not UL Listed or CSA Certified.
Catalog Numbers
HLDMP**
HLD**
4.22"
(107.2)
HLDMP
4.27"
(108.5)
Inserts
Description
Replacement cord grip inserts for Valise® device,
(bag of 40).
Note: **Not UL Listed or CSA Certified.
Catalog Numbers
HBLVCGBK**
7.27"
(184.7)
Accessories
HLD
Dimensions in Inches (mm)
www.hubbell-wiring.com
A-45
Straight Blade Devices
Straight Blade Devices
Accessories
For 3 Wire 30 and 50 Ampere, 125 and 250 Volts and 277 Volts AC
Wallplates
Description
Stainless steel, 302/304, smooth, 1-gang.
Stainless steel, 302/304, satin, smooth, 2-gang.
Aluminum, smooth, 1-gang.
Nylon, black, smooth, 1-gang.
Nylon, black, smooth, 2-gang.
SS723
Catalog Numbers
SS723
SS703
SA723
NP724BK
NP703BK
SS703
IP44
SUITABILITY
Weatherproof Lift Covers
Description
Cast aluminum for FS/FD box mounting for 30 amp.
Cast aluminum for FS/FD box mounting for 50 amp.
Catalog Numbers
HBL9420
HBL9425
HBL9420
PLUGOUT® Device
Description
Electrical plug lockout device for 30A, 50A and 60A devices.
Note: See Section U for complete details on lockout devices.
6.31"
(160.3)
Catalog Numbers
HLD2
Accessories
12.5"
(317.5)
HLD2
A-46
www.hubbell-wiring.com
Dimensions in Inches (mm)
Straight Blade Devices
Straight Blade Devices
Accessories
For 4 Wire 30, 50 and 60 Ampere, 125/250 Volts, 3Ø250 and 3ØY120/208 Volts AC
Wallplates, 2-Gang
Description
Brass .04 in. (1.0), brushed, smooth.
Catalog Numbers
SB701
SS701
IP44
SUITABILITY
Weatherproof Lift Covers
Description
RTP, gray, lift cover plate. Will fit FS/FD boxes having
plate mounting hole 3.25 in. x 3.75 in. (82.5 x 95.2), centers.
Only for use with receptacles on pages A-38 to A-41 with “A" suffix.
Same as above except yellow.
Note: RTP is an abbreviation for reinforced thermoplastic polyester.
Catalog Numbers
HBL7777A
HBL77CM77A
HBL7777A
PLUGOUT® Device
Description
Electrical plug lockout device for 30A, 50A and 60A devices.
Note: See Section U for complete details on lockout devices.
Catalog Numbers
HLD2
6.31"
(160.3)
12.5"
(317.5)
Dimensions in Inches (mm)
www.hubbell-wiring.com
Accessories
HLD2
A-47
Straight Blade Devices
Technical Information
Tamper Resistant (TR) and Weather Resistant (WR)
NEC® Code Requirements
Tamper-Resistant Receptacles
T
TR
Per the 2008 National Electrical Code (NEC®) Article 406.11; All 125 volt, 15 and 20 amp receptacles
in dwelling units shall be a listed tamper resistant type. Dwelling units are defined as a single unit,
providing complete and independent living facilities for one or more persons, including permanent
provisions for living, sleeping, cooking and sanitation. Listed devices are required to have a TR marking
on the face visible when installed without a cover plate.
Tamper-Resistant (TR) receptacles incorporate internal mechanisms to limit access to energized
internal components.
CR15TR
This new TR requirement is mandatory for use in dwelling unit outlets. There are also many other
applications where the use of TR receptacles can provide an additional level of electrical safety.
Weather-Resistant Receptacles
WR
W
R
Per the 2008 National Electrical Code (NEC®) Article 406.8; All 125 and 250 volt, 15 and 20 amp nonlocking receptacles for use in damp or wet locations shall be a listed weather resistant type. Listed
devices are required to have a WR marking on the face visible when installed.
Weather-Resistant (WR) receptacles installed outdoors and in other wet and damp locations are
subject to more demanding temperature variations, direct sunlight and unusual mechanical abuse
than those in a typical dry environment.
HBL52CM62I
Note: The above TR and WR symbols appear throughout this section for easy identification of
Tamper and Weather Resistant receptacles.
Technical Information
DR20GRYWR
BR15IWR
NEC® is a registered trademark of the National Fire Protection Association (NFPA).
A-48
www.hubbell-wiring.com
Dimensions in Inches (mm)
Straight Blade Devices
Straight Blade Devices
Technical Information
Hospital Grade, Straight Blade Duplex Receptacles
HBL8200GY
Specifications
Receptacles
Typical Specification – Catalog No. HBL8200.
Manufacturer’s Identification – Hubbell HBL8200.
Description – Hospital Grade, Straight Blade Duplex Receptacle.
Type – 2 Pole, 3 Wire, Grounding.
Rating – 15A, 125V.
Certification: UL Listed to UL 498 File E2186, Fed. Spec. WC596
Hospital Grade, NEMA® WD-6 requirement
Certified to CSA, C22.2, No. 42 File 285.
Part
Receptacle
Top
Base
By-Pass Power Contacts
Clamping Plate
Mounting Strap
Line Terminal Screws
Description
15A
PBT*
RTP**
.037 in. (.9) Brass – Nickel Finish
.031 in. (.8) Brass – Nickel Finish
.050 in. (1.3) Brass – Nickel Finish
#10-32 Silicone Bronze, Multiple Drive
Hex Head Grounding Screw
#10-32 (Green) Silicon Bronze,
Multiple Drive
Silicon Bronze
Stainless Steel
Stainless Steel
Center Assembly Rivet
Automatic Grounding Clip
Flat Head Mounting Screws
Performance
Electrical
Dielectric Voltage
Max. Working Voltage
Current Interrupting
Temperature Rise
Mechanical
Terminal Identification
Terminal Accommodation
Product Identification
Environmental – Material
Flammability
Operating Temperatures
Notes: *Polybutylene Terephthalate.
**Reinforced Thermoplastic Polyester.
Withstands 2,000V minimum.
125V or 250V as rated.
Certified for current interrupting at full rated current.
Max 30°C temperature rise at full rated current after 50 cycles
of overload at 150% of rated current at a power factor of 75%.
Terminals identified in accordance with UL 498 and CSA (Brass,
White, Green).
#14-10 AWG stranded or solid copper conductor only.
Ratings are a permanent part of the device.
UL 94V-0 and UL 94-5 VA.
Maximum continuous 75°C; minimum -40°C (w/o impact).
Technical Information
NEMA® is a registered trademark of the National Electrical Manufacturers Association.
Dimensions in Inches (mm)
www.hubbell-wiring.com
A-49
Straight Blade Devices
Straight Blade Devices
Technical Information
HBL® Extra Heavy Duty, Specification Grade Duplex Receptacles
HBL5262
Specifications
Receptacles
Part
Typical Specification – Catalog No. HBL5262.
Receptacle
Manufacturer’s Identification – Hubbell HBL5262.
Top
Description – Heavy Duty Straight Blade Duplex Receptacle. Base
Type – 2 Pole, 3 Wire, Grounding.
By-Pass Power Contacts
Rating – 15A, 125V.
Wire Clamps
Certification: UL Listed to UL498 File E2186, Guide RTRT Mounting Strap
Fed. Spec. WC596, Meets NEMA® WD-6 requirements
Line Terminal Screws
Certified to CSA, C22.2, No. 42 File 285.
Ground Screw
Center Assembly Rivet
Automatic Grounding Clip
Flat Head Mounting Screws
Ground Tension Clips
Description
15A
Nylon
RTP*
.037 in. (.9) Brass
.031 in. (.8) Brass
.050 in. (1.3) Brass
#10-32 Brass, Multiple Drive
#10-32 Brass, Multiple Drive (Green)
Brass
Stainless Steel
Steel-Zinc Plated
Steel-Nickel Finish
Performance
Electrical
Dielectric Voltage
Max. Working Voltage
Current Interrupting
Temperature Rise
Mechanical
Terminal Identification
Terminal Accommodation
Product Identification
Environmental – Material
Flammability
Operating Temperatures
Withstands 2,000V minimum.
125V or 250V as rated.
Certified for current interrupting at full rated current.
Max 30°C temperature rise at full rated current after 50 cycles of
overload at 150% of rated current at a power factor of 75%.
Terminals identified in accordance with UL 498 and CSA (Brass, White,
Green).
#14-10 AWG stranded or solid copper conductor only.
Ratings are a permanent part of the device.
Top: UL 94V-2.
Base: UL 94V-0 and UL 94-5 VA.
Maximum continuous 75°C; minimum -40°C (w/o impact).
Technical Information
Note: *Reinforced Thermoplastic Polyester.
NEMA® is a registered trademark of the National Electrical Manufacturers Association.
A-50
www.hubbell-wiring.com
Dimensions in Inches (mm)
Straight Blade Devices
Straight Blade Devices
Technical Information
HBL® Compact Extra Heavy Duty, Specification Grade Receptacles
HBL5252
Specifications
Receptacles
Typical Specification – Catalog No. HBL5252.
Manufacturer’s Identification – Hubbell HBL5252.
Description – Straight Blade Duplex Receptacle.
Type – 2 Pole, 3 Wire, Grounding.
Rating – 15A, 125V.
Certification – UL Listed to UL 498 File E2186,
Fed. Spec. WC596, Certified to CSA 22.2, No. 42 File 285.
Part
Receptacle
Top
Base
Triple Wipe Power Contacts
Wire Clamps
Mounting Strap
Line Terminal Screws
Ground Screw
Center Assembly Rivet
Automatic Grounding Clip
Flat Head Mounting Screws
Description
15A
Nylon
RTP*
.032 in. (.8) Brass
.062 in. (1.8) Steel
.050 in. (1.3) Brass
#8-32 Brass, Multiple Drive
#8-32 Brass, Multiple Drive (Green)
Brass
Stainless Steel
Steel-Zinc Plated
Performance
Electrical
Dielectric Voltage
Max. Working Voltage
Current Interrupting
Temperature Rise
Withstands 2,000V minimum.
125V or 250V as rated.
Certified for current interrupting at full rated current.
Max 30°C temperature rise at full rated current after 50 cycles of
overload at 150% of rated current at a power factor of 75%.
Mechanical
Terminal Identification
Terminal Accommodation
Product Identification
Terminals identified in accordance with UL 498 (Brass, White, Green).
#14-10 AWG stranded or solid copper conductor only.
Ratings are a permanent part of the device.
Environmental – Material
Flammability
Operating Temperatures
UL 94V-2.
Maximum continuous 75°C; minimum -40°C (w/o impact).
Notes: *Reinforced Thermoplastic Polyester.
Please consult the factory for product dimensions and specifications of other products listed in this catalog.
Technical Information
Dimensions in Inches (mm)
www.hubbell-wiring.com
A-51
Straight Blade Devices
Straight Blade Devices
Technical Information
HBL® Compact Heavy Duty Style Line® Specification Grade
and Hospital Grade Straight Blade Duplex Receptacles
HBL2152
HBL2172
Specifications
Receptacle
Typical Specification – Catalog No. HBL2152.
Manufacturer’s Identification – Hubbell HBL2152 Receptacle.
Description – Straight Blade Duplex Receptacle.
Type – 2 Pole, 3 Wire Grounding.
Rating – 15A, 125V.
Certification – UL File No. E2186.
Certified to CSA File No. 285.
Part
Receptacle
Top
Base
Triple Wipe Power Contacts
Wire Clamp
Description
15A
Nylon
Nylon
.031 in. (.8) Brass
.062 in. (1.8) Steel-Nickel Finish
Mounting Strap
Ground Contact
Line Terminal Screws
Ground Screw
Center Assembly Staple
Ground Staple
Mounting Screws
.040 in. (1) Steel (Galvanized)
.031 in. (.8) Brass
#8-32 Brass, Multiple Drive
#8-32 Brass, Multiple Drive
.040 in. (1) Steel (Galvanized)
Stainless Steel
Zinc Plated Steel
Receptacle
Typical Specification – Catalog No. HBL2172.
Manufacturer’s Identification – Hubbell HBL2182 Receptacle.
Description – Straight Blade Duplex Receptacle.
Type – 2 Pole, 3 Wire Grounding.
Rating – 15A, 125V.
Certification – UL listed to UL498 File E2186,
Fed. Spec. WC596, Certified to CSA File No. 285.
Part
Receptacle
Top
Base
Triple Wipe Power Contacts
Wire Clamp
Description
15A
Nylon
RTP*
.031 in. (.8) Brass
.062 in. (1.8) Steel-Nickel Finish
Mounting Strap
Ground Contact
Line Terminal Screws
Ground Screw
Center Assembly Staple
Ground Staple
Mounting Screws
.040 in. (1) Steel (Galvanized)
.031 in. (.8) Brass
#8-32 Brass, Multiple Drive
#8-32 Brass, Multiple Drive
.040 in. (1) Steel (Galvanized)
Stainless Steel
Zinc Plated Steel
Performance
Electrical
Dielectric Voltage
Max. Working Voltage
Current Interrupting
Temperature Rise
Technical Information
Mechanical
Terminal Identification
Terminal Accommodation
Product Identification
Withstands 2,000V minimum.
125V.
Certified for current interrupting at full rated current.
Max 30°C temperature rise at full rated current after 50 cycles of overload at
150% of rated current at a power factor of 75%.
Terminals identified in accordance with UL 498 and CSA (Brass, White, Green)
#14-10 AWG stranded or solid copper conductor only.
Ratings are a permanent part of the device.
Environmental – Material
Flammability
UL 94V-2.
Operating Temperature
Maximum continuous 75° C; minimum -40°C (w/o impact).
Notes: *Reinforced Thermoplastic Polyester.
Please consult the factory for product dimensions and specifications of other products listed in this catalog.
A-52
www.hubbell-wiring.com
Dimensions in Inches (mm)
Straight Blade Devices
Straight Blade Devices
Technical Information
SNAPConnect™ Straight Blade Duplex Receptacles
SNAP5362I
Specifications
Terminal
Contact
Terminal Body
Wire
SNAP6R1
Brass
Clear Polycarbonate
SNAP6R2
Brass
Clear Polycarbonate
Solid copper #12 AWG THHN/THWN-2 600V, T90 Nylon FT-1,
PVC 90C (min).
Stranded copper #12 AWG THHN/THWN-2 600V, T90 Nylon FT-1,
PVC 90C (min).
Receptacle
Part
Description
Typical Specification – Catalog No. SNAP5262.
Manufacturer’s Identification – Hubbell SNAP5262.
Description – Straight Blade Duplex Receptacle.
Type – 2 Pole, 3 Wire, Grounding.
Rating – 15A, 125V.
Certification – UL Listed to UL 498.
Fed. Spec. WC596, Certified to CSA 22.2, No. 42.
Receptacle
Top
Base
Triple Wipe Power Contacts
Mounting Strap
Automatic Grounding Clip
Flat Head Mounting Screws
15A
Nylon
Nylon
Brass
Galvanized Steel
Stainless Steel
Steel-Zinc Plated/Self Tapping
Performance
Electrical
Dielectric Voltage
Max. Working Voltage
Current Interrupting
Withstands 2,000V minimum.
125V as rated.
Receptacle certified for current interrupting at full rated current with
equivalently rated NEMA® plug.
Max 30°C temperature rise at full rated current after 50 cycles of
overload at 150% of rated DC current.
Temperature Rise
Mechanical
Terminal Wire Leads Identification
Terminal wire leads identified in accordance with UL 498
(Black, White, Green).
Ratings are a permanent part of the device.
Product Identification
Environmental – Material
Flammability
Operating Temperatures
UL 94V-2.
Maximum continuous 75°C; minimum -40°C (without impact).
Dimensions
Green Dot on Hospital Grade Only
.86"
(21.9)
1.56"
(39.7)
Technical Information
2.62"
(66.5)
.24"
(6.1)
3.28"
(83.3)
1.25"
(31.8)
NEMA® is a registered trademark of the National Electrical Manufacturers Association.
Dimensions in Inches (mm)
www.hubbell-wiring.com
A-53
Straight Blade Devices
Straight Blade Devices
Technical Information
5252
5262
Hubbell-Pro, Heavy Duty, Straight Blade Duplex Receptacles
Specifications
Receptacle
Typical Specification – Catalog No. 5252.
Manufacturer’s Identification – Hubbell 5252 Receptacle.
Description – Straight Blade Duplex Receptacle.
Type – 2 Pole, 3 Wire Grounding.
Rating – 15A, 125V.
Certification – UL File No. E2186.
Certified to CSA File No. 285
Part
Receptacle
Top
Base
Triple Wipe Power Contacts
Wire Clamp
Mounting Strap
Ground Contact
Line Terminal Screws
Ground Screw
Center Assembly Staple
Ground Staple
Mounting Screws
Description
15A
Nylon
Nylon
.031 in. (.8) Brass
.062 in. (1.8) Steel-Nickel Finish
.040 in. (1) Steel (Galvanized)
.031 in. (.8) Brass
#8-32 Brass, Multiple Drive
#8-32 Brass, Multiple Drive
.040 in. (1) Steel (Galvanized)
Stainless Steel
Zinc Plated Steel
Receptacle
Typical Specification – Catalog No. 5262.
Manufacturer’s Identification – Hubbell 5262 Receptacle.
Description – Straight Blade Duplex Receptacle.
Type – 2 Pole, 3 Wire Grounding.
Rating – 15A, 125V.
Certification – UL listed to UL498 File E2186,
Fed. Spec. WC596, Certified to CSA C22.2, No. 42.
Part
Receptacle
Top
Base
Triple Wipe Power Contacts
Wire Clamp
Mounting Strap
Ground Contact
Line Terminal Screws
Ground Screw
Center Assembly Staple
Ground Staple
Mounting Screws
Description
15A
Nylon
RTP*
.031 in. (.8) Brass
.062 in. (1.8) Steel-Nickel Finish
.040 in. (1) Steel (Galvanized)
.031 in. (.8) Brass
#8-32 Brass, Multiple Drive
#8-32 Brass, Multiple Drive
.040 in. (1) Steel (Galvanized)
Stainless Steel
Zinc Plated Steel
Performance
Electrical
Dielectric Voltage
Max. Working Voltage
Current Interrupting
Temperature Rise
Technical Information
Mechanical
Terminal Identification
Terminal Accommodation
Product Identification
Withstands 2,000V minimum.
125V.
Certified for current interrupting at full rated current.
Max 30°C temperature rise at full rated current after 50 cycles of overload at
150% of rated current at a power factor of 75%.
Terminals identified in accordance with UL 498 and CSA (Brass, White, Green)
#14-10 AWG stranded or solid copper conductor only.
Ratings are a permanent part of the device.
Environmental – Material
Flammability
UL 94V-2.
Operating Temperature
Maximum continuous 75°C; minimum -40°C (w/o impact).
Notes: *Reinforced Thermoplastic Polyester.
Please consult the factory for product dimensions and specifications of other products listed in this catalog.
A-54
www.hubbell-wiring.com
Dimensions in Inches (mm)
Technical Information
CR15, CR20
CR15TR, CR20TR
CRF15, CRF20
BR15, BR20
BR15TR, BR20TR
DR15, DR20
DR15TR, DR20TR
BR15WR, BR20WR
BR15WRTR, BR20WRTR
DR15WR, DR20WR
DR15WRTR, DR20WRTR
Straight Blade Devices
Straight Blade Devices
Commercial Specification Grade Receptacles
Specifications
Description
Type – 2 Pole, 3 Wire Grounding
Type – 2 Pole, 3 Wire Grounding
Type – 2 Pole, 3 Wire Grounding
Part
Top
Base
Double Wipe Power
Contacts
Wire Clamp
Nylon
Nylon
.030 in. (.8) Brass
Nylon
Nylon
.030 in. (.8) Brass
Nylon (UV Rated)
Nylon
.030 in. (.8) Brass
.062 in. (1.6) Steel-Nickel Plated
.062 in. (1.6) Steel-Nickel Plated
Ground Staple
Mounting Screws
.040 in. (1) Steel (Galvanized)
.031 in. (.8) Brass
#8-32 Plated Steel,
Multiple Drive
#8-32 Plated Steel,
Multiple Drive
Stainless Steel
Zinc Plated Steel
.040 in. (1) Steel (Galvanized)
.031 in. (.8) Brass
#8-32 Plated Steel,
Multiple Drive
#8-32 Plated Steel,
Multiple Drive
Stainless Steel
Zinc Plated Steel
.040 in. (1) Steel (Galvanized)
.031 in. (.8) Brass
#8-32 Stainless Steel,
Multiple Drive
#8-32 Stainless Steel,
Multiple Drive
Stainless Steel
Stainless Steel
Certification
UL Listed
Fed. Spec.
UL498
WC596*
UL498
WC596*
UL498
WC596*
Certified to CSA
C22.2, No. 42
C22.2, No. 42
C22.2, No. 42
Withstands 2,000V minimum.
125V
Certified for current interrupting
at full rated current.
Max 30°C temperature rise at full
rated current after 100 cycles of
overload at 150% of rated current.
Withstands 2,000V minimum.
125V
Certified for current interrupting
at full rated current.
Max 30°C temperature rise at full
rated current after 100 cycles of
overload at 150% of rated current.
Withstands 2,000V minimum.
125V
Certified for current interrupting at
full rated current.
Max 30°C temperature rise at full
rated current after 100 cycles of
overload at 150% of rated current.
Terminals identified in accordance
with UL 498 and CSA (Brass,
White, Green).
Terminal Accommodation #14-10 AWG stranded or solid
copper conductor only.
Product Identification
Ratings are a permanent part
of the device.
Terminals identified in accordance
with UL 498 and CSA (Brass,
White, Green).
#14-10 AWG stranded or solid
copper conductor only.
Ratings are a permanent part
of the device.
Terminals identified in accordance
with UL 498 and CSA (Brass,
White, Green).
#14-10 AWG stranded or solid
copper conductor only.
Ratings are a permanent part
of the device.
Environmental – Material
Flammability
UL 94V-2.
UL 94V-2.
UL 94V-2.
Maximum continuous 75°C;
minimum -40°C (w/o impact).
Maximum continuous 75°C;
minimum -40°C (w/o impact).
Maximum continuous 75°C;
minimum -40°C (w/o impact).
Finish
Mounting Strap
Ground Contact
Line Terminal Screws
Ground Screw
–
Performance
Electrical
Dielectric Voltage
Max. Working Voltage
Current Interrupting
Temperature Rise
Operating Temperature
Note: *Decorator and Commercial Tamper-Resistant devices are not Fed. Spec. Listed.
Dimensions in Inches (mm)
www.hubbell-wiring.com
A-55
Technical Information
Mechanical
Terminal Identification
Straight Blade Devices
Straight Blade Devices
Technical Information
HBL415I
®
4-PLEX Receptacles
Specifications
Receptacle
Typical Specification – Catalog No. HBL415.
Manufacturer’s Identification – Hubbell 4-PLEX HBL415.
Description – Straight Blade, Multiple Outlet Receptacle.
Type – 2 Pole, 3 Wire, Grounding.
Rating 15A, 125V.
Certification – Listed to UL Standard 498 File E2186
Certified to CSA 22.2, No. 42 File 285.
Part
Receptacle
Top
Base
Power Contacts
Ground Contacts
Ground Plate
(Hospital Grade)
Line & Neutral Terminal Plate
Line Terminal Screw
Ground Screw
Description
15 or 20A
Polycarbonate
Polycarbonate
.032 in. (.8) Brass
.031 in. (.8) Brass
.032 in. (.8) Plated Steel
.050 in. (1.3) Plated Steel
.031 in. (.8) Brass
#8-32 Brass
#8-32 Brass (Green)
Performance
Electrical
Dielectric Voltage
Max. Working Voltage
Current Interrupting
Temperature Rise
Mechanical
Terminal Identification
Withstands 2,000V minimum.
125V.
Capable of withstanding a fault level of 1000A, per UL498.
Max 30°C temperature rise at full rated current after 50 cycles of
overload current at 150% of rated current at a power factor of 75%.
Environmental
Flammability
Operating Temperatures
UL 94V-2.
Maximum continuous 75°C; minimum -40°C (w/o impact).
Technical Information
Terminal Accommodation
Product Identification
Terminals identified in accordance with UL498 and CSA (Brass, White,
Green).
#14-12 AWG stranded or solid copper conductor only.
Ratings are a permanent part of the device.
A-56
www.hubbell-wiring.com
Dimensions in Inches (mm)
Technical Information
HBL5266C
HBL5269C
®
Insulgrip Plugs and Connector Bodies
Specifications
Plugs
Typical Specification – Catalog No. HBL5266C.
Manufacturer’s Identification – Hubbell HBL5266C.
Description – Straight Body Plug.
Type – 2 Pole, 3 Wire, Grounding.
Rating – 15A, 125V.
Verified to Federal Spec W-C-596
Certification – UL Listed to UL498 File E1706, CSA
Certified to C22.2 No. 42 File 280.
IP Suitability – IP20.
Part
Plug
Housing
Blade Holder
Retainer
Cord Clamp
Contact Blades
Ground Contact Blade
Line Terminal Screws
Ground Screw
Wire Clamps
Description
15A
Nylon – Black
Nylon – Natural
Polycarbonate – Clear
Nylon – Natural
.060 in. (1.5) Brass
.040 in. (1.0) Copper Alloy
#8-32 Brass, Multiple Drive
#8-32 Brass, Multiple Drive (Green)
.062 in. (1.6) Steel – Nickel Finish
Connector Bodies
Typical Specification – Catalog No. HBL5269C.
Manufacturer’s Identification – Hubbell HBL5269C.
Description – Straight Body Connector.
Type – 2 Pole, 3 Wire, Grounding.
Rating – 15A, 125V.
Verified to Federal Spec W-C-596
Certification – UL Listed to UL498 File E1706, CSA
Certified to C22.2 No. 42 File 280.
IP Suitability – IP20.
Part
Connector Body
Housing
Contact Holder
Retainer
Cord Clamp
Power Contacts
Line Terminal Screws
Ground Screw
Wire Clamps
Description
15A
Nylon – Black
Nylon – Natural
Polycarbonate – Clear
Nylon – Natural
.040 in. (1.0) Copper Alloy
#8-32 Brass, Multiple Drive
#8-32 Brass, Multiple Drive (Green)
.062 in. (1.6) Steel – Nickel Finish
Straight Blade Devices
Straight Blade Devices
Performance
Electrical
Dielectric Voltage
Max. Working Voltage
Current Interrupting
Temperature Rise
Mechanical
Terminal Identification
Withstands 2,000V minimum.
125V or 250V as rated.
Certified for current interrupting at full rated current.
Max 30°C temperature rise at full rated current after 50 cycles of
overload at 150% of rated current at a power factor of 75%.
Terminal Accommodation
Product Identification
Torque Range
Cord Diameter Range
Terminals identified in accordance with UL498 and CSA (Brass, White,
Green).
#18-10 AWG copper conductors only.
Ratings are a permanent part of the device.
12 in./lb. terminal screws, 7 in./lb. assembly screws.
.230–.720 in. (5.8–18.3) integral cord grip.
Environmental – Material
Flammability
Operating Temperatures
UL 94HB or better.
Maximum continuous 75°C; minimum – 40°C (w/o impact).
Technical Information
Dimensions in Inches (mm)
www.hubbell-wiring.com
A-57
Straight Blade Devices
Straight Blade Devices
Technical Information
HBL5965VY
HBL5969VY
Valise® Plugs and Connectors
Specifications
Plugs
Typical Specification – Catalog No. HBL5965VY.
Manufacturer’s Identification – Hubbell HBL5965VY.
Description – Straight Body Plug.
Type – 2 Pole, 3 Wire, Grounding.
Rating – 15A, 125V.
Verified to Federal Spec W-C-596
Certification – UL Listed to UL 498 File E1706, CSA Certified
to C22.2 No. 42 File 280C.
IP Suitability – IP20.
Part
Plug
Housing
Contact Blades
Ground Blade
Line Terminal Screws
Ground Screw
Cable Inserts
Wire Clamps
Body Holding Screws
Description
15A
Nylon
Brass
Brass
Steel-Copper, Multiple Drive
Steel (Green), Multiple Drive
Poly Phenylene Oxide
Steel
Steel, Multiple Drive
Connector Bodies
Typical Specification – Catalog No. HBL5969VY.
Manufacturer’s Identification – Hubbell HBL5969VY.
Description – Straight Body Connector.
Type – 2 Pole, 3 Wire, Grounding.
Rating – 15A, 125V
Verified to Federal Spec W-C-596
Certification – UL Listed to UL 498 File E1706, CSA Certified
to C22.2 No. 42 File 280C.
IP Suitability – IP20.
Part
Connector Body
Housing
Contact and Ground Springs
Line Terminal Screws
Ground Screw
Cable Inserts
Wire Clamps
Body Holding Screws
Connector
15A
Nylon
Brass
Steel-Copper, Multiple Drive
Steel (Green), Multiple Drive
Poly Phenylene Oxide
Steel
Steel, Multiple Drive
Performance
Electrical
Dielectric Voltage
Max. Working Voltage
Current interrupting
Temperature Rise
Mechanical
Terminal Identification
Terminal Accommodation
Technical Information
Product Identification
Torque
Cord Diameter Range
Environmental – Material
Flammability
Operating Temperature
Withstands 2,000V minimum.
125V or 250V as rated.
Certified for current interrupting at full rated current.
Max 30°C temperature rise at full rated current after 50 cycles
of overload at 150% of rated current at a power factor of 75%.
Terminals identified in accordance with UL 498 and CSA (Brass,
White, Green).
Copper conductors only.
2 Wire 15A #18-14 AWG,
2 Wire 20A & 3 Wire 15A #18-12 AWG,
Hospital Grade #16-12 AWG,
I.D. Valise #18-16 AWG.
Molded Rating on Device Face.
12 in./lb. terminal screws, 7 in./lb. assembly screws.
2-Wire 15A Only .218–.385 in. (5.5–9.8),
2-Wire 20A & 3-Wire .220–.660 in. (5.6–16.8),
Hospital Grade .300–.660 in. (7.6–16.8),
I.D. Valise .230–.360 in. (5.8–9.1).
UL 94V-2.
Maximum continuous 75°C; minimum -40°C (w/o impact).
Standards
NEMA® WD1
NEMA Configurations
Listed to UL Standard UL498
Certified to CSA Standard C22.2 No. 42
Verified to Federal Spec W-C-596
NEMA® is a registered trademark of the National Electrical Manufacturers Association.
A-58
www.hubbell-wiring.com
Dimensions in Inches (mm)
Technical Information
H320B
H320C
H320P
H320R
IEC 320 Devices
Straight Blade Devices
Straight Blade Devices
Specifications
Plug
Catalog Numbers
Description
Type
Rating
Certification
Cord Accommodation
IP Suitability
Receptacle
Catalog Numbers
Description
Type
Rating
Certification
Terminal Accommodation
Connector
Catalog Numbers
Description
Type
Rating
Configuration
Certification
Cord Accommodation
IP Suitability
Inlet
Catalog Numbers
Description
Type
Rating
Terminal Accommodation
Dimensions in Inches (mm)
H320R
IEC Configuration compatible straight blade panel mount receptacle.
2-pole + earth.
16A 250V AC for European service;
20A 250V AC for North American service.
UL listed 20A 250V AC – File No. E2186;
CSA certified 20A 250V AC – File No 17337.
North American – #16-12 AWG stranded or solid copper
conductor only.
International – 1.55mm2–2.5mm2.
H320C.
IEC Detachable straight blade connector.
2-pole + earth.
16A 250V AC for European service;
20A 250V AC for North American service.
IEC 60320-1 Style appliance coupler, C19.
UL listed 20A 250V AC – File No. E1706;
CSA Certified 20A 250V AC – File No. 17337;
UL classified to IEC 320, 16A 250V AC – File No. E111246;
North American – 16/3SJ-12/3SJ (.325–.475 in. dia.);
International – (HAR cord) 3x1.5mm2–3x2.5mm2 (8mm–12mm dia.).
IP20.
H320B & H320BL.
IEC Straight blade panel mount power inlet.
2-pole + earth.
16A 250V AC for European service;
20A 250V AC for North American service.
IEC 60320-1 Style appliance coupler, C20.
UL listed 20A 250V AC – File No. E1706;
CSA certified 20A 250V AC – File No. 17337;
UL classified to IEC 320, 16A 250V AC – File No. E111246;
VDE certified at 16A 250V AC – File No. 12469 1550 1002.
North American – #16-12 AWG stranded or solid copper
conductor only.
International – 1.5mm2–2.5mm2.
www.hubbell-wiring.com
Technical Information
Configuration
Certification
H320P
IEC Configuration compatible straight blade Valise® plug.
2-pole + earth.
16A 250V AC for European service;
20A 250V AC for North American service.
UL listed 20A 250V AC – File No. E1706;
CSA Certified 20A 250V AC – File No. 17337.
North American – 16/3 SJ-12/3SJ (.325–.475 in. dia.);
International – (HAR cord) 3x1.5mm2 3x2.5mm2 (8–12mm dia.).
IP20.
A-59
Straight Blade Devices
Straight Blade Devices
Technical Information
HBL9431C
HBL9430A
Heavy Duty Insulgrip® Plugs and Receptacles
Specifications
Plug
Typical Specification - Catalog No. HBL9431C
Manufacturer's identification - Hubbell HBL9431C
Description - Straight Body Plug
Type - 3 Pole, 4 Wire, Grounding
Rating - 30A, 125/250V
Certification - UL Listed File E1706, CSA Certified*
IP Suitability - IP20
Receptacle
Typical Specification - Catalog No. HBL9430A
Manufacturer's Identification - Hubbell HBL9430A
Description - Single Receptacle
Type - 3 Pole, 4 Wire, Grounding
Rating - 30A, 125/250V
Certification - UL Listed File E2186, CSA Certified
Part
Plug
Housing
Blade Holder & Retainer
Blades
Terminal Screws
Box Terminals
Cord Clamps
Mounting and Clamp Screws
Cord Grip Range
Part
Receptacle
Housing Construction
Mounting Plate
Contacts
Ground Shunt
Terminal Screws
Box Terminals
Description
30A
Supertough Nylon
Reinforced Thermoplastic Polyester
Brass
6in. Allen Head, Plated Steel
Copper
Reinforced Thermoplastic Polyester
Stainless Steel
.625–1.310 in. (15.9–33.3)
Description
30A
Reinforced Thermoplastic Polyester
.062 in. (1.5) Pre-Plated Steel
Brass
Brass
6 in. Allen Head, Plated Steel
Copper
Performance
Electrical
Dielectric Voltage
Max. Working Voltage
Current Interruption
Temperature Rise
Mechanical
Terminal Identification
Terminal Accommodation
Production Identification
Environmental
Flammability
Operating Temperatures
Withstands 2,000V minimum.
125V or 250V as rated.
Certified for current interrupting at full rated current.
Max 30°C temperature rise at full rated current after 50 cycles of
overload at 150% of rated current at a power factor of 75%.
Terminals identified in accordance with UL 498 (Brass, White, Green)
#12 AWG through #4 AWG copper wire only.
Ratings are a permanent part of the device.
Receptacle: UL 94 VO.
Plug: UL 94 HB (Housing), UL 94 VO (Blade Holder and Retainer).
Maximum continuous 60°C, minimum -40°C (w/o impact).
Technical Information
Note: *Listed to UL Standard 498 (Attachment Plugs and Receptacles), Certified to CSA Standard 42M
(General Use Receptacles, Attachments, Plugs and Singular Wiring Devices) where applicable.
A-60
www.hubbell-wiring.com
Dimensions in Inches (mm)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement