Star Codes *41 Read out the Local IP address of the device *43

Star Codes *41 Read out the Local IP address of the device *43
Star Codes
*41
*43
*44
*46
*61
*65
*66
*67
*68
*77
*98
Read out the Local IP address of the device
Mute Call
Unmute Call
Merge both parties calls, creating a 3 way conference call
Reset the device
Do Not Disturb ON
Do Not Disturb OFF
Disable Outgoing Calls
Enable Outgoing Calls
Block Outgoing Caller ID
Voicemail Access
Services

Call waiting
o By Default this is always enabled

Caller ID
o Will show the City, Province, and the Phone number of the device when
calling out.

Voice Mail
o By default, Voice mail is turned OFF. To enable it, please proceed to the
customer account on http://myaccount.getdialtone.com.

Call Forwarding
o To add a forwarding number, please proceed in the customer account
manager. “Phone number”  “Auto Forward”
o Priority must be set to at least 2 and UP
o Please enter the number in the following format 15141234567

Speed Dialing
o Located in the customer account manager
o Choose the speed dial tab on the left hand side,
o Choose the number you wish to set the speed dial to (ranging from 0-9)
then enter the destination/phone number you wish to call Ex. 051234567,
o Finally, fill in the name for your contact and assign the speed dial.
o To make the call using speed dial, pick up your phone, dial the speed dial
number followed by the pound key.

3 way calling
o When calling out

Place the first call on hold with Flash

Dial the second number

Once it’s connected, press *46#
o When receiving a call

Place the first call on hold with Flash

Answer the second line

Once it’s connected, press *46#
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising