Multiquip Mikasa MVH-306D, MVH-306DS Reversible Plate Compactor Operation and Parts Manual

OPERATION AND PARTS MANUAL

SERIES

MODELS

MVH-306D (RECOIL START)

MVH-306DS (ELECTRIC START)

REVERSIBLE PLATE COMPACTOR

(YANMAR L-70EE DIESEL ENGINE)

Revision #11 (04/04/14)

To find the latest revision of this publication, visit our website at: www.multiquip.com

THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.

PROPOSITION 65 WARNING

Diesel engine exhaust and some of

PAGE 2 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14)

NOTES

MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14) — PAGE 3

TABLE OF CONTENTS

MIKASA MVH-306D/DS-

REVERSIBLE PLATE

COMPACTOR

Proposition 65 Warning ..............................................2

Table Of Contents ......................................................4

Parts Ordering Procedures ........................................5

Safety information ................................................ 8-10

Specifications ...........................................................11

Dimensions ..............................................................12

General Information .................................................13

Components .............................................................14

Basic Engine ............................................................15

Inspection ........................................................... 16-17

Operation ........................................................... 18-21

Maintenance ...................................................... 22-25

Troubleshooting (Engine) .........................................26

Troubleshooting (Compactor) ..................................27

Yanmar L-70EE Diesel Engine

Cylinder Block Assembly .................................... 50-51

Cylinder Head and Cover Assembly .................. 52-53

Muffler Assembly ............................................... 54-55

Air Cleaner Assembly ......................................... 56-57

Crankshaft, Piston and Camshaft Assembly ..... 58-59

Lub. Oil Pump and Governor Assembly ............. 60-61

Cooling and Starting Device Assembly .............. 62-63

Fuel Injection Pump Assembly ........................... 64-65

Fuel Tank and Fuel Line Assembly .................... 66-67

Starting Motor and Dynamo Assembly .............. 68-69

Tool, Label and Gasket Set Assembly ............... 70-71

Terms and Conditions of Sale — Parts ................... 72

NOTICE

Specification and part number are subject to change without notice

.

PARTS ILLUSTRATIONS

Explanation Of Code In Remarks Column ...............28

Suggested Spare Parts ............................................29

Nameplate and Decals....................................... 30-31

Vibrating Plate Assembly ................................... 32-33

Base and Engine Assembly ............................... 34-37

Vibrator Assembly .............................................. 38-39

Control Handle Assembly .................................. 40-43

Hand Pump Assembly........................................ 44-45

Battery Assembly ............................................... 46-47

Electric Device.................................................... 48-49

PAGE 4 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14)

Best Deal!

PARTS ORDERING PROCEDURES

Ordering parts has never been easier!

Choose from three easy options:

Effective:

January 1 st , 2006

Order via Internet (Dealers Only) :

Order parts on-line using Multiquip’s SmartEquip website!

■ View Parts Diagrams

■ Order Parts

■ Print Specification Information

If you have an MQ Account, to obtain a Username and Password, E-mail us at: parts@multiquip. com.

To obtain an MQ Account, contact your

District Sales Manager for more information.

Goto www.multiquip.com and click on

Order Parts to log in and save!

Use the internet and qualify for a 5% Discount on Standard orders for all orders which include complete part numbers.*

Note: Discounts Are Subject To Change

Order via Fax (Dealers Only) :

All customers are welcome to order parts via Fax.

Domestic (US) Customers dial:

1-800-6-PARTS-7 (800-672-7877)

Fax your order in and qualify for a 2% Discount on Standard orders for all orders which include complete part numbers.*

Note: Discounts Are Subject To Change

Order via Phone:

Domestic (US) Dealers Call:

1-800-427-1244

Non-Dealer Customers:

Contact your local Multiquip Dealer for parts or call 800-427-1244 for help in locating a dealer near you.

International Customers should contact their local Multiquip Representatives for

Parts Ordering information.

When ordering parts, please supply:

❒ Dealer Account Number

❒ Dealer Name and Address

❒ Shipping Address (if different than billing address)

❒ Return Fax Number

❒ Applicable Model Number

❒ Quantity, Part Number and Description of Each Part

❒ Specify Preferred Method of Shipment:

✓

■ Ground

■ Priority One

■ Next Day

■ Second/Third Day

✓ DHL

✓ Truck

NOTICE

All orders are treated as Standard Orders and will ship the same day if received prior to 3PM PST.

WE ACCEPT ALL MAJOR CREDIT CARDS!

MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14) — PAGE 5

Do not operate or service the equipment before reading the entire manual. Safety precautions should be followed at all times when operating this equipment.

Failure to read and understand the safety messages and operating instructions could result in injury to yourself and others.

SAFETY MESSAGES

The four safety messages shown below will inform you about potential hazards that could injure you or others. The safety messages specifically address the level of exposure to the operator and are preceded by one of four words:

DANGER, WARNING, CAUTION or NOTICE.

SAFETY SYMBOLS

DANGER

Indicates a hazardous situation which, if not avoided,

WILL result in DEATH or SERIOUS INJURY.

WARNING

Indicates a hazardous situation which, if not avoided,

COULD result in DEATH or SERIOUS INJURY.

CAUTION

Indicates a hazardous situation which, if not avoided,

COULD result in MINOR or MODERATE INJURY.

NOTICE

Addresses practices not related to personal injury.

SAFETY INFORMATION

Potential hazards associated with the operation of this equipment will be referenced with hazard symbols which may appear throughout this manual in conjunction with safety messages.

Lethal Exhaust Gases

PAGE 6 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14)

GENERAL SAFETY

CAUTION

„ NEVER operate this equipment without proper protective clothing, shatterproof glasses, respiratory protection, hearing protection, steel-toed boots and other protective devices required by the job or city and state regulations.

„ NEVER operate this equipment when not feeling well due to fatigue, illness or when under medication.

„ NEVER operate this equipment under the influence of drugs or alcohol.

„ ALWAYS check the equipment for loosened threads or bolts before starting.

„ DO NOT use the equipment for any purpose other than its intended purposes or applications.

„ ALWAYS clear the work area of any debris, tools, etc. that would constitute a hazard while the equipment is in operation.

SAFETY INFORMATION

NOTICE

„ This equipment should only be operated by trained and qualified personnel 18 years of age and older.

„ Whenever necessary, replace nameplate, operation and safety decals when they become difficult read.

„ Manufacturer does not assume responsibility for any accident due to equipment modifications. Unauthorized equipment modification will void all warranties.

„ NEVER use accessories or attachments that are not recommended by Multiquip for this equipment. Damage to the equipment and/or injury to user may result.

„ ALWAYS know the location of the nearest fire extinguisher.

„ ALWAYS know the location of the nearest first aid kit.

„ ALWAYS know the location of the nearest phone or keep

a phone on the job site. Also, know the phone numbers of the nearest ambulance, doctor and fire department.

This information will be invaluable in the case of an emergency.

MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14) — PAGE 7

COMPACTOR SAFETY

DANGER

„ NEVER operate the equipment in an explosive atmosphere or near combustible materials. An explosion or fire could result causing severe bodily harm or even death.

WARNING

„ NEVER disconnect any emergency or safety devices.

These devices are intended for operator safety.

Disconnection of these devices can cause severe injury, bodily harm or even death. Disconnection of any of these devices will void all warranties.

CAUTION

„ NEVER lubricate components or attempt service on a running machine.

NOTICE

„ ALWAYS keep the machine in proper running condition.

„ Fix damage to machine and replace any broken parts immediately.

„ ALWAYS store equipment properly when it is not being used. Equipment should be stored in a clean, dry location out of the reach of children and unauthorized personnel.

ENGINE SAFETY

DANGER

„ The engine fuel exhaust gases contain poisonous carbon monoxide. This gas is colorless and odorless, and can cause death if inhaled.

„ The engine of this equipment requires an adequate free flow of cooling air. NEVER operate this equipment in any enclosed or narrow area where free flow of the air is restricted. If the air flow is restricted it will cause injury to people and property and serious damage to the equipment or engine.

SAFETY INFORMATION

WARNING

„ DO NOT place hands or fingers inside engine compartment when engine is running.

„ NEVER operate the engine with heat shields or guards removed.

„ Keep fingers, hands hair and clothing away from all moving parts to prevent injury.

„ DO NOT remove the radiator cap while the engine is hot. High pressure boiling water will gush out of the radiator and severely scald any persons in the general area of the compactor.

„ DO NOT remove the coolant drain plug while the engine is hot. Hot coolant will gush out of the coolant tank and severely scald any persons in the general area of the compactor.

„ DO NOT remove the engine oil drain plug while the engine is hot. Hot oil will gush out of the oil tank and severely scald any persons in the general area of the compactor.

CAUTION

„ NEVER touch the hot exhaust manifold, muffler or cylinder. Allow these parts to cool before servicing equipment.

NOTICE

„ NEVER run engine without an air filter or with a dirty air filter. Severe engine damage may occur. Service air filter frequently to prevent engine malfunction.

„ NEVER tamper with the factory settings of the engine or engine governor. Damage to the engine or equipment can result if operating in speed ranges above the maximum allowable.

„ NEVER tip the engine to extreme angles during lifting as it may cause oil to gravitate into the cylinder head, making the engine start difficult.

PAGE 8 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14)

FUEL SAFETY

DANGER

„ DO NOT add fuel to equipment if it is placed inside truck bed with plastic liner. Possibility exists of explosion or fire due to static electricity.

FUEL

FUEL

„ DO NOT start the engine near spilled fuel or combustible fluids. Diesel fuel is extremely flammable and its vapors can cause an explosion if ignited.

„ ALWAYS refuel in a well-ventilated area, away from sparks and open flames.

„ ALWAYS use extreme caution when working with

flammable liquids.

„ DO NOT fill the fuel tank while the engine is running or hot.

„ DO NOT overfill tank, since spilled fuel could ignite if it comes into contact with hot engine parts or sparks from the ignition system.

„ Store fuel in appropriate containers, in well-ventilated areas and away from sparks and flames.

„ NEVER use fuel as a cleaning agent.

„ DO NOT smoke around or near the equipment. Fire or explosion could result from fuel vapors or if fuel is spilled on a hot engine.

SAFETY INFORMATION

BATTERY SAFETY (ELECTRIC START ONLY)

DANGER

„ DO NOT drop the battery. There is a possibility that the battery will explode.

„ DO NOT expose the battery to open flames, sparks, cigarettes, etc. The battery contains combustible gases and liquids. If these gases and liquids come into contact with a flame or spark, an explosion could occur.

WARNING

„ ALWAYS wear safety glasses when handling the battery to avoid eye irritation.

The battery contains acids that can cause injury to the eyes and skin.

„ Use well-insulated gloves when picking up the battery.

„ ALWAYS keep the battery charged. If the battery is not charged, combustible gas will build up.

„ DO NOT charge battery if frozen. Battery can explode.

When frozen, warm the battery to at least 61°F (16°C).

„ ALWAYS recharge the battery in a well-ventilated environment to avoid the risk of a dangerous concentration of combustible gases.

„ If the battery liquid (dilute sulfuric acid) comes into contact with clothing or skin, rinse skin or clothing immediately with plenty of water.

„ If the battery liquid (dilute sulfuric acid) comes into contact with eyes, rinse eyes immediately with plenty of water and contact the nearest doctor or hospital to seek medical attention.

CAUTION

„ ALWAYS disconnect the NEGATIVE battery terminal before performing service on the equipment.

„ ALWAYS keep battery cables in good working condition.

Repair or replace all worn cables.

MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14) — PAGE 9

TRANSPORTING SAFETY

CAUTION

„ NEVER allow any person or animal to stand underneath the equipment while lifting.

NOTICE

„ Before lifting, make sure that the equipment parts (hook and vibration insulator) are not damaged and screws are not loose or missing.

„ Always make sure crane or lifitng device has been properly secured to the lifting bail (hook) of the equipment.

„ ALWAYS shutdown engine before transporting.

„ NEVER lift the equipment while the engine is running.

„ Tighten fuel tank cap securely and close fuel cock to prevent fuel from spilling.

„ Use adequate lifting cable (wire or rope) of sufficient strength.

„ Use one point suspension hook and lift straight upwards.

„ DO NOT lift machine to unnecessary heights.

„ ALWAYS tie down equipment during transport by securing the equipment with rope.

ENVIRONMENTAL SAFETY

NOTICE

„ Dispose of hazardous waste properly.

Examples of potentially hazardous waste are used motor oil, fuel and fuel filters.

„ DO NOT use food or plastic containers to dispose of hazardous waste.

„ DO NOT pour waste, oil or fuel directly onto the ground, down a drain or into any water source.

SAFETY INFORMATION

PAGE 10 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14)

SPECIFICATIONS

C e n t r fi u g a l F o r c e

T a b l e 1 .

M V H 3 0 6 D

C o m p a c t o r

/ D S

S

R p e c i f e v e r s i b i c a t i o n s l e P l a t e

1 0 , 1 2 5 l b s .

( 4 , 5 9 3 k g )

V i b r a it o n F r e q u e n c y

T r a v e il n g S p e e d

P l a t e S i z e ( L x W )

E x t e r n a l P l a t e S i z e ( L x W )

M a x .

A r e a o f C o m p a c it o n ( n o e x t e n s i o n s )

O v e r a ll L e n g t h

O v e r a ll W i d t h

O v e r a ll H e i g h t ( w ti h h a n d l e )

O v e r a ll H e i g h t ( w ti h o u t h a n d l e )

O p e r a it n g W e i g h t D / D S

O p e r a it n g W e i g h t ( e x t e n s i o n p l a t e s )

L u b r i c a it n g O li i n V i b r a it o n C a s e

4 , 4 0 0 v p m ( 7 0 H z )

0 t o 7 5 f /t m i n ( 0 t o 2 3 m / m i n )

1 8 x 3 4 i n ( 4 5 .

7 2 x 8 6 .

3 6 c m )

2 4 x 3 4 i n ( 6 0 .

9 6 x 8 6 .

3 6 c m )

6 , 7 5 0 s q .

f .t

( 2 , 0 5 7 s q .

m e t e r s )

6 1 .

8 i n ( 1 5 7 0 m m )

1 8 .

0 i n ( 4 5 7 m m )

4 4 .

1 i n ( 1 1 2 0 m m )

3 1 .

7 i n ( 8 0 5 m m )

6 8 4 l b s .

( 3 1 0 k g ) / 6 9 2 l b s .

( 3 1 3 k g .

)

7 1 7 l b s .

( 3 2 5 k g ) / 7 2 5 l b s .

( 3 2 8 k g .

)

5 0 .

7 f .l

o z .

( 1 5 0 0 c c )

E n g i n e M a k e

E n g i n e M o d e l

E n g i n e T y p e

C y il n d e r B o r e X S t r o k e

D i s p l a c e m e n t

M a x i m u m O u p u t

F u e l T a n k C a p a c ti y

O li C a p a c ti y

S t a r it n g M e t h o d D / D S

D r y N e t W e i g h t R e c o i /l E l e c t r i c

D i m e n s i o n s ( L x W x H )

T a b l e 2 .

E n g i n e S p e c i f i c a t i o n s ( Y A N M A R )

Y A N M A R

L 7 0 E E D V M K ( R e c o li S t a r t ) / L 7 0 E E D E M K ( E l e c t r i c S t a r t )

A ri c o o l e d 4 c y c l e D i e s e l E n g i n e

3 .

0 7 x 2 .

5 1 i n ( 7 8 x 6 4 m m )

1 0 .

3 4 lf o z ( 3 0 6 c m 3 )

6 .

5 H P @ 3 , 6 0 0 R P M

3 .

5 q u a r t s ( 3 .

3 1 l ti e r s )

1 .

1 6 q u a r t s ( 1 .

1 0 l ti e r s )

R e c o i /l E l e c t r i c

7 2 .

7 5 l b s .

( 3 3 k g ) / 8 3 .

7 7 l b s .

( 3 8 k g )

1 5 .

1 1 x 1 6 .

5 7 x 1 7 .

7 1 i n ( 3 8 4 x 4 2 1 x 4 5 0 m m )

MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14) — PAGE 11

DIMENSIONS

Figure 3. MVH-306D/DS Reversible Plate Compactor Dimensions

C

D

E

R E F .

A

B

T A B L E 3 .

D I M E N S I O N S

D I M E N S I O N S

5 3 i n .

( 1 3 4 .

6 c m .

)

1 8 i n .

( 4 6 c m .

)

3 4 i n .

( 8 6 c m .

)

6 3 .

8 i n .

( 1 6 2 c m .

)

3 2 .

5 i n .

( 8 2 .

5 c m .

)

PAGE 12 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14)

GENERAL INFORMATION

Plate Compactor

The Mikasa MVH-306D/DS is a walk behind, reversible plate compactor designed for the compaction of sand, clay and asphalt. This plate compactor is a powerful compacting tool capable of applying a tremendous force in consecutive high frequency vibrations to a soil surface. Its applications include soil compacting for road, embankments and reservoirs as well as backfilling for gas pipelines, water pipelines and cable installation work.

Vibratory Plates

The vibratory plates of the MVH-306D/DS produce low amplitude high frequency vibrations, designed to compact granular soils.

The resulting vibrations cause forward motion. The engine and handle are vibration isolated from the vibrating plate. The heavier the plate, the more compaction force it generates.

Reversible Vibratory Plates

Reversible vibratory plates have two eccentric weights that allow a smooth transition for forward and reverse travel, plus increased compaction force as the result of dual weights.

Due to their weight and force, reversible plates are ideal for semi-cohesive soils.

Frequency/Speed

The compactor's vibrating plate maximum frequency is 4400 vpm (vibrations per minute). The forward and reverse travel speed of the compactor is approximately 75 ft./minute (23 meters/ minute).

Engine

The Mikasa MVH-306D/DS Plate Compactor is equipped with either a Yanmar L-70EE D (recoil start) or L-70EE DS (electric start) diesel engine.

Controls

Before starting the MVH-340DSB Plate Compactor, identify and understand the function of the controls and components as indicated in Figure 3.

MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14) — PAGE 13

COMPONENTS

Figure 4. MVH-306D/DS Reversible Plate

Compactor Components

Figure 4 illustrates the location of the major components for the

MVH-306D/DS Reversible Plate Compactor. The function of each component is described below:

1. Hand Grip – When operating the compactor use this hand grip to manuever the compactor.

2. Forward & Reverse Lever – Push the lever forward, the compactor will move in a forward direction, pull the lever backwards, the compactor will move in backwards direction.

Placing the lever in the middle (midway) will cause the compactor not to move (neutral).

3. Handle Bar – When operating the compactor, this handle is to be in the downward position. When the compactor is to be stored, move the handle bar to the upright position.

4.

Guard Hook - Used to lift the machine with crane or other lifting device.

5.

Stopper - Locks the handle in place in the upward postion for stowing.

6. Engine – This plate compactor uses a YANMAR L-70EE

D/DS diesel engine. Refer to the owner’s manual for engine information and related topics.

7.

Battery (Option) - This unit uses a 12-volt battery. See maintenance of this manual for proper care of battery.

8. Belt Cover – Remove this cover to gain access to the Vbelts. NEVER run the compactor without the V-belt cover. If the V-belt cover is not installed, the possibility exist that your hand may get caught between the V-belt and clutch, thus causing serious injury and bodily harm.

9. Base Plate – Designed to compact sand, clay, and asphalt.

10. Oil Reservoir – Fill with Shell Tellus Oil 46 or equivalent grade hydraulic oil.

11. Vibration Case – Encloses the eccentric, gears and counter weights.

12. Hydraulic Cylinder – Activated by moving the travel lever.

The cylinder controls the direction of movement by the plate compactor.

13. Shock Absorber – Protects plate compactor from damage by absorbing vibration durring operation.

14. Throttle Lever – Controls speed of the plate compactor.

Place straight vertically to start, push fully counter-clockwise for full throttle and fully clockwise to stop plate compactor.

14. Ignition Switch (Option) – Provided for electric start models onlt

PAGE 14 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14)

BASIC ENGINE

1.

2.

Fuel Filler Cap – Remove this cap to add unleaded gasoline to the fuel tank. Make sure cap is tighten securely.

DO NOT over fill.

Fuel Tank – Capacity is 3.5 quarts (3.31 liters) of diesel fuel.

Figure 5. MVH-306D/DS Engine Components

ENGINE COMPONENTS

Figure 5 illustrates the location of the major lever components of the machine. Each component is described below:

6.

Recoil Starter– Manual-starting method. Pull the starter grip until resistance is felt, then pull briskly and smoothly.

7.

Oil Filler Cap / Dipstick – Remove this cap to add oil to the engine crankcase. Read dipstick to determine if oil level is low. DO NOT over fill.

8.

Oil Drain Plug – Unscrew plug to drain oil from engine crankcase. Dispose of oil in a safe manner.

3.

4.

5.

Air Cleaner – Prevents dirt and other debris from entering the fuel system. Remove wing-nut on top of air filter cannister to gain access to filter element.

Muffler – Used to reduce noise and emissions.

Recoil Starting Handle (pull rope) – Type of engine starting method. Alternate type would be electric start

(ignition key).

9.

Decompression Lever– Press down before starting engine. To prevent damage to engine, DO NOT use for any other purpose.

10. Fuel Cock– Controls the flow of diesel fuel to the carburetor.

Must be in the ON position when starting and running the engine.

MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14) — PAGE 15

CAUTION

NEVER operate the compactor in a confined area or enclosed area structure that does not provide ample free flow of

air.

INSPECTION

4. If the oil level is low (Figure 7), fill to the edge of the oil filler hole with the recommended oil type (Table 4). Maximum oil capacity is 1.16 quarts (1.10 liters).

CAUTION

ALWAYS wear approved eye and hearing protection before operating the compactor.

Before Starting

1.

Read safety instructions at the beginning of manual.

2.

Familiarize yourself with the operating and control elements of the machine and the working environment. This includes obstacles in the working area, bearing capacity of the ground and the necessary safety provisions.

3.

Check the air filter for dirt and dust. If air filter is dirty, replace air filter with a new one as required.

4.

Check fastening nuts and bolts for tightness. Loose threads may cause damage to the machine when vibrating.

5. Understand the geographical features and regulations ofthe job site.

6.

Clean the compactor, removing dirt and dust. Particularly, the bottom of the plate, engine cooling air inlet.

Checking Engine Oil Level

1.

To check the engine oil level, place the compactor on secure level ground with the engine stopped.

2.

Remove the dipstick from the engine oil filler hole (Figure 6) and wipe it clean.

3.

Insert and remove the dipstick witout screwing it into the filler neck. Check the oil level shown on the dipstick.

S e a s o n

S u m m e r

S p r i n g / F a ll

W i n t e r

Figure 7. Engine Oil Leve

T a b l e 4 .

O li T y p e

T e m p e r a t u r e

2 5 ° C o r H i g h e r

2 5 ° C ~ 1 0 ° C

0 ° C o r L o w e r

O li T y p e

S A E 1 0 W 3 0

S A E 1 0 W 3 0 / 2 0

S A E 1 0 W 1 0

Checking the Hydraulic Oil Level

1.

To check the engine oil level, place the compactor on secure level ground with the engine stopped.

2.

Remove the hydraulic oil breather cap located at the top of the hydraulic oil tank (Figure 8).

3.

Using a 24 mm wrench, remove the hydraulic oil filler plug.

4.

Visually inspect to determine if hydraulic oil level is low. If oil level is low add Shell Tellus 46 hydraulic oil or equavalent through the hand pump oil filler port.

Figure 6. Engine Oil Dipstick Removal Figure 8. Hydraulic Oil Filler Plug Removal

PAGE 16 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14)

INSPECTION

CAUTION

DO NOT overfill hydraulic oil tank. This could cause oil leaks and sluggish operation. Clean cap and surrounding area before opening to prevent dirt from entering oil tank.

DANGER

EXPLOSIVE FUEL!

Motor fuels are highly flammable and can be dangerous if mishandled. DO NOT smoke while refueling. DO NOT attempt to refuel if the engine is hot or running.

5.

When adding hydraulic oil, only fill to the specified oil level as marked on the front of the hydraulic oil tank (Figure 9). DO

NOT overfill Checking The Fuel

1. Remove the fuel cap located on top of fuel tank.

2. Visually inspect to see if fuel level is low. If fuel is low, replenish with diesel fuel (Figure 12).

3. When refueling, be sure to use a strainer for filtration. DO NOT top-off fuel. Wipe up any spilled fuel.

Figure 9. Oil Tank (Front View)

Checking the Air Cleaner

1.

To check the engine oil level, place the compactor on secure level ground with the engine stopped.

2.

Loosen the wing nut (Figure 10), remove the air cleaner cover.

Figure 12. Refueling

Figure 10. Air Cleaner Element

3.

Remove the air cleaner element (Figure 11) and inspect it for signs of wear or dirt. If air cleaner element is dirty, clean or replace element.

Figure 11. Air Cleaner Element

MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14) — PAGE 17

OPERATION

CAUTION

DO NOT attempt to operate the compactor until the Safety, General

Information and Inspection sections of this manual have been read and

thoroughly understood.

Releasing the Handle

1. Pull the handle release pin, (Figure 13) then push down on the hand grip to release the handle.

Figure 14. Handle Adjustment

STARTING THE ENGINE

Electric Start (Option)

1.

Open the fuel cock (Figure 15).

Figure 15. Open Fuel Cock

2.

Place the throttle lever (Figure 16) in the START position

(center). Place the travel lever in the neutral position

(center)

Figure 13. Handle Release Pin

Adjusting Handle Height

The height of the handle is adjustable for your comfort .

1. Loosen the butterfly screw (Figure 14).

2. Turn the grip clockwise to raise the handle or counterclockwise to lower the handle.

3. When the handle is raised to the desired height, tighten the butterfly screw.

Figure 16. Travel/Throttle Lever (Start Positions)

3.

Insert the ignition key into the ignition switch and turn it to the RUN position (Figure 17). The buzzer should sound at this time.

4.

Turn the ignition key further to the right to the START position to start the engine. Buzzer stops sounding and the engine starts.

PAGE 18 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14)

OPERATION

5.

If the engine fails to start, DO NOT continue to rotate the ignition key for more than 5 seconds. Return the key to the

RUN position and wait 10 seconds before starting again

Figure 18. Engine Start Handle

4.

Push down decompression lever (Figure 19) and release.

Figure 17. Starter Switch (Option)

CAUTION

While the engine is running, never try to turn the ignition key to the START position.

6.

After starting the engine, continue to warm up the engine for about 3 to 10 seconds especially in cold weather.

7.

If the buzzer does not stop sounding after the engine has started, shutdown engine immediately and check engine oil level. The buzzer functions as a engine oil level alam warning device.

5.

Figure 19. Decompression Lever

If the engine does not start, repeat steps 4 and 5.

TRAVELING

NOTICE

When starting a unit with an electric strart capability, a decompressor is not normally required. However, when ambient temperature or battery charger level is low, use of a decompressor will help make the start-up easier.

CAUTION

Make sure to follow all safety rules referenced in the safety section of this manual before operating compactor. Keep work area clear of debris and other objects that could cause damage to the compactor or bodily harm.

1. Grasp the compactor's hand grip (Figure 20), and move the engine throttle lever (Figure 20) quickly to the fast position.

2. With the throttle lever in the fast position, the engine speed should be around 3,600 RPM, therefore engaging the centrifugal clutch

Recoil Start

1.

Open the fuel cock (Figure 15).

2.

Move the throttle lever to the START position (Figure 16).

3.

Grasp the starter grip (Figure 18) and slowly pull it out. The resistance becomes the hardest at a certain position, corresponding to the compression point. Pull the starter grip briskly and smoothly for starting.

Figure 20. Throttle Lever (Fast)

MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14) — PAGE 19

OPERATION

NOTICE

ALWAYS move the throttle lever quickly without hesitation, because increasing the engine speed slowly causes the clutch to slip.

3. To make the compactor move in the forward direction push the travel lever ( Figure 21) forward.

Figure 22. Throttle Lever (Stop)

Figure 21. Travel Lever

4. To make the compactor move in the reverse direction pull the travel lever ( Figure 21) backwards.

5. Firmly gasp the compactor's hand grip, the compactor will begin moving in the desired position when the direction lever has been placed in the desired position.

6. Slowly walk behind the compactor and be on the lookout for any large objects or foreign matter that might cause damage to the compactor or bodily injury.

7. If travel lever is placed in the neutral position, the machine will vibrate in place.

8. To move the compactor laterally, hold the hand grip firmly and swing compactor. DO NOT swing compactor while gripping the travel lever.

Figure 23. Starter Switch (STOP)

Emergency Shutdown

1. For a recoil start type engine, move the throttle lever quickly to the STOP position.

2. For a electric start type engine, place the engine IGNITION switch in the OFF position.

STOWING THE HANDLE

1.

Push up the handle upward (Figure 24) until the handle locks in place.

Normal Shutdown

1.

Return the throttle lever to the START position (Figure 16).

Allow the machine to cool down for 2 to 3minutes.

2.

Place the travel lever in the NEUTRAL position.

3.

Place the throttle lever in the STOP position (Figure 22) to stop the engine. If using an electric start unit, return the key switch to the STOP position (Figure 23) as soon as the engine stops.

4.

Close the fuel cock (Figure 15).

Figure 24. Stowing the Handle

PAGE 20 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14)

CAUTION

Inspection and other services should always be carried out on hard and level ground with the engine shutdown.

MAINTENANCE

NOTICE

Fuel piping and connections should be replaced every 2 years.

Inspection and Maintenance Service Tables.

1. To make sure your plate compactor is always in good working condition before using, carry out the maintenance inspection in accordance with Tables 5 through 7.

T A B L E 6 .

M V H 3 0 6 D / D S E N G I N E C H E C K

I T E M

O li o r F u e l L e a k

T i g h t n e s s

T h r e a d s o f F a s t e n i n g

H O U R S O F O P E R A T I O N

E v e r y 8 h o u r s ( e v e r y d a y )

T A B L E 5 .

M V H 3 0 6 D / D S M A C H I N E I N S P E C T I O N

I

L

S

T

D o c a

E o

M r e m s e w s a g o e r d

M

P i s s a r t i s n g

H O U R S O F

O P E R A T I O N

E v e r y

( e v e r y

8 h o u r d a y ) s

E v e r y

( e v e r y

8 h o u r d a y ) s

F u n c it o n

S y s t e m o f

P a r t

C o n t r o l il n g E v e r y

( e v e r y

8 h o u r d a y ) s

R E M A R K S

H y d r a u il c S y s t e m L e a k E v e r y 1 0 0 h o u r s S e e p a g e 2 1

E n g i n e O li C h e c k

R e p l e n i s h m e n t a n d

E n g i n e O li R e p l a c e m e n t

A ri F i tl e r C l e a n i n g

E v e r y 8 h o u r s ( e v e r y d a y )

E

( R v e r y e p l e

8 n i s h o u r s h t o

( e v e r y d s p e c i if e d a y m

) a x i m u m l e v e )l

A tf e r f ri s t

1 0 0 h o u r s

2 5 h o u r s t h e n e v e r y 5 0 t o

E v e r y 1 0 0 h o u r s

S e e s e p a r a t e e n g i n e m a n u a l f o r d e t a li s o n e n g i n e c h e c k .

V i b r a t o r O li C h e c k

V i b r a t o r O li

R e p l a c e m e n t

E

E v v e e r r y y

1

3

0 0

0 0 h h o u o u r s r s

S

S e e e e p a p a g e g e

2

2

3

3

H y d r a u

H y d r a u il c il c

O

O

R e p l a c e m e n t li li

C h e c k E v e r y 1 0 0 h o u r s S e e p a g e 2 3

F ri s t h o u r s , a tf e r t h e n

2 0 0 e v e r y

1 , 0 0 0 h o u r s

S e e p a g e 2 3

V b e tl ( c l u t c h ) C h e c k E v e r y 2 0 0 h o u r s S e e p a g e 2 2

B a tt e r y C h e c k E v e r y 1 0 0 h o u r s S e e p a g e 2 4

Daily Service

 Check for leakage of fuel or oil.

 Check for loose screws including tightness. See Table 7 below (tightening torque ), for retightening:

T A B L E 7 .

T I G H T E N I N G T O R Q U E ( i n .

k g / c m ) D i a m e t e r

M a t e r i a l 6 m m 8 m m 1 0 m m 1 2 m m

4 T

6 8 T

7

1

0

0 0

1

2

5

5

0

0

3

5

0

0

0

0

5

8

0

0

0

0

1 4 m m

7 5 0

1 , 3 0 0

1 6 m m

1

2

,

,

1

0

0

0

0

0

1 8 m m

1 , 4 0 0

2 , 7 0 0

2 0 m m

2 , 0 0 0

3 , 8 0 0

1

*

1 T 1

1

5

0

0

0

4 0 0 8 0 0

3 0 0 ~

3 5 0

6 5 0

7 0 0

~

1 , 2 0 0 2 , 0 0 0 2 , 9 0 0 4 , 2 0 0

* ( I n c a s e c o u n t e r p a r t i s o f a l u m i n u m )

( T h r e a d s

M a t e r i a l i n a n d u s e q u a l w ti h ti y o t h i f s m a m a c h i n e t e r i a l i s a r e a ll m a r k e d r i g h t o n h a n e a c h d e d ) b o l ,t a n d s c r e w .

5 , 6 0 0

CAUTION

These inspection intervals are for operation under normal conditions. Adjust your inspection intervals based on the number hours plate compactor is in use, and particular working conditions.

 Remove soil and clean the bottom of compaction plate.



Check hand pump, piping and hose for any leakage. A loosened hydraulic hose can be a cause for leakage. Check hydraulic hose connections with wrench applied for tightness.



Check engine oil.

MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14) — PAGE 21

MAINTENANCE

Engine Oil Replacement:

1. Replace engine oil, in first 25 hours of operation and every

50 to 100 hours afterwards.

2. Oil may be drained more easily when it is warm after operation (For more details, see separate engine Owner's

Manual).

Air Filter (Every 6 Months or 400 Hours)

1. The air filter element should be cleaned because a clogged air cleaner can cause poor engine starting, lack of power and shorten engine life substantially.

Figure 25. Engine Air Filter and Element

2. To clean or replace air filter loosen the wing nut on the air filter housing (Figure 25) remove the cover and take out air filter cartridge. If only cleaning of the air filter is desired blow through the air filter cartridge from the inside, moving a jet of dry compressed air up and down until all dust is removed.

CAUTION

NEVER attempt to check the V-belt with the engine running.

Severe injury can occur if your hand gets caught between the

V-belt and the clutch (Figure 26). Always use safety gloves.

CLUTCH

PULLEY

Figure 27. V-Belt Check



Replacing the V-belt

Remove the belt cover. Engage an offset wrench 3/4”(19 mm) or the like to vibrator pulley (lower) fastening bolt. Engage waste cloth or the like at midway of V-belt on the left side and while pulling it back strongly, rotate the offset wrench clockwise so that the V-belt will come off.



Reinstalling the V-belt

Engage V-belt to lower vibrator pulley and push the V-belt to left side of upper clutch and, in the same manner as in removal, rotate offset wrench clockwise so that the V-belt goes back on.



Checking Clutch

Check the clutch simultaneously with V-belt checking. With belt cover removed, check outer drum of the clutch for seizure and

"V" groove for wear or damage with your eyes. Clean the "V" groove as necessary. If the shoe is worn, power transmission becomes deficient and slipping will result.



Replacing Clutch

Remove V-belt. Remove bolt at engine power output by giving a light tap with a hammer to an engaged wrench and rotate bolt counterclockwise. Remove clutch with a pulley extractor. To reinstall, reverse the procedure.

VIBRATOR

PULLEY

Figure 26 V-Belt Hazard

Checking and Replacing the V-Belt and Clutch

1. After 200 hours of operation, remove the belt cover to check the V-belt tension (Figure 27). Tension is proper if the belt bends about 3/8”(10 mm) when depressed strongly with finger between shafts. Loose or worn V-belts reduces power transmission efficiency, causing weak compaction and reduces the life of the belt itself.

CAUTION

Whenever the compactor's vibration becomes weak or lost during normal operation regardless of operation hours, check the V-belt and clutch immediately.

PAGE 22 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14)

Vibrator Oil Level Check

NOTICE

Always clean the area around the vibrator oil level check plug before removing oil check plug. This will prevent dirt and debris from entering the system.

MAINTENANCE

2. Push the travel lever back and forth to drain the hydraulic oil from the hand pump (hydraulic oil reservoir).

1. In every 100 hours of operation, with the machine positioned horizontally, use a 3/4” (19 mm) wrench and remove vibrator oil level check plug (Figure 28). Visually inspect and see if vibrator oil level is up to filler port. Be sure to clean area around check hole to prevent dirt and dust from entering.

Figure 29. Hydraulic Oil Cylinder/Hose

3. After draining hydraulic oil, re-connect hydraulic oil hose to cylinder.

4. Place handle in upright position. Pull travel lever all the way back (reverse), and using a rope, secure travel lever to hand grip.

Adding Hydraulic Oil

1. Remove the breather cap and oil plug (Figure 30) from the hydraulic oil tank using a 24mm hex socket.

Figure 28. Vibrator Oil Drain and Check Plugs

Draining Vibrator Oil

1. Replace vibrator oil after first 200 hours and in every 1,000 hours of operation. Oil capacity is 600 cc,

2. Position handle bar vertically (storage position).

3. Using a 14 mm wrench remove the vibrator oil drain plug

(Figure 28) from the vibrating plate assembly.

NOTICE

For draining oil through level check hole, have the machine inclined with a sleeper or the like placed under the compaction plate on opposite side.

Figure 30. Hydraulic Oil Tank

2. Using a funnel, add Shell Tellus Oil #46 or equavalent to the hydraulic oil tank through the oil filler port (Figure 31).

Oil tank capacity is 50.7 fl. oz (1500 cc)

4. After hydraulic oil has been completely drained from machine, fill with 10W-30 motor oil to the appropriate safe operating level (Figure 28).

5. Re-install drain plug into vibrating plate assembly. Apply seal tape or Loctite #575 to thread portion of drain plug.

Draining Hydraulic Oil

1. Disconnect the hydraulic hose (Figure 29) connected to the hydraulic oil cylinder.

Figure 31. Hydraulic Oil Maintenance

MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14) — PAGE 23

MAINTENANCE

CAUTION

Make sure hydraulic oil is at a normal safe operating level.

DO NOT over fill. Over filling (excessive oil) will cause excess oil to blow out of breather plug.

3. Loosen bleeder plug located at top of hydraulic cylinder on side of vibrator (Figure 32). Air remaining in the circuit will be forced out of the bleeder plug. Once all air has been purged from the hydraulic system, tighten bleeder plug securely

4. Re-insert oil plug into hydraulic oil tank and tighten securely.

Re-install breather cap.

NOTICE

The bleeder plug should only be loosened, but not removed.

 Always wear eye protection and rubber gloves, since the battery contains sulfuric acid which burns skin and eats through clothing. In case of contact, flush thoroughly with water and contact a doctor immediately.

 Use wire brush or sand paper to clean the battery terminals.

 Always check battery for cracks or any other damage. If white pattern appears inside the battery or paste has accumulated at the bottom, replace the battery.

 If the compactor will not be in operation for a long period of time, store in cool dry place and check the battery charge level every month to maintain the performance of the battery.

 Check the battery regularly and make sure that each electrolyte level is to the bottom of the vent well

(Figure 33). If necessary add only distilled water in a wellventilated area.

CAUTION

Wear safety glasses or face mask, protective clothes, and rubber gloves when working with battery.

Figure 33. Battery Electrolyte Levels

BATTERY MAINTENANCE (Option)

Mishandling of the battery shortens the service life of the battery and adds to maintenance cost. When handling the battery do the following:

Figure 32. Bleeder Plug

 The battery electrolyte contains sulphuric acid, be careful not to let the battery electrolyte come in contact with your body or clothing.

 Always check the battery terminals periodically to ensure that they are in good condition.

BATTERY CHARGING

 DO NOT charge battery with the battery cables connected to the compactor. The diodes will be damage by the high voltage.

 Batteries generate hydrogen gas which can be highly explosive. DO NOT smoke or allow flames or sparks near the battery, especially during charging of the battery.

 Charge the battery in a open air environment (plenty of ventilation).

 Before charging , remove the cap from each cell of the battery.

 Connect the positive (+) lead of the charger to the positive

(+) terminal of the battery and the negative (-) lead of the charger to the negative (-) terminal of the battery. DO NOT reverse the polarity when charging. Reverse polarity will damage the charger rectifer or the battery.

PAGE 24 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14)

MAINTENANCE

 Battery fluid will be lost through continuous charging and discharging.

 Discontinue charging if the electrolyte temperature exceeds

117

°°°°°

F (45

°°°°°

C)

NOTICE

LONG TERM STORAGE

When storing your compactor for long periods do the following:

 Run the engine at idle spped for 3-5 minutes.

 Stop the engine. Drain the engine crankcase oil while the engine is still warm. Fill Engine crankcase with fresh oil.

 Remove the rubber plug (Figure 36) on the rocker arm cover and add about 2 cc of lube oil. Reinstall rubber plug.

During summer much more battery fluid is lost than in winter.

Before starting, check battery electrolyte levels and replenish with distilled water to the upper mark on the battery.

BATTERY CABLE CONNECTION (Option)

1.

Take off the battery cover by removing the M6 nuts (Figure 32).

2.

When removing cable, disconnect the ground side (normally negative) first (Figure 34).

3.

When installing cable connect the ground side (normally negative) last.

Figure 36. Decompression Lever

 For recoil type compactors, push the decompression down

(non-decompression position) and hold it while you pull the recoil starter grip(Figure 37) rope 2 or 3 times. DO NOT start the engine.

Figure 34. Battery Removal

CHECKING FUEL FILTER

1.

Clean the fuel filter (Figure 35) every 3 months or 200 hours.

2.

Replace fuel filter every 6 months or 400 hours.

3.

To clean the fuel filter, loosen the nuts of the fuel cock and pullout the filter from the F.O. tank filler port. Wash the filter throughly with diesel fuel oil.

4.

Re-install fuel filter and connect all associated hardware.

Figure 37. Recoil Starter Grip

 For electric start type compactors, turn the engine for 2 or 3 seconds with the decompression lever set in the nondecompression position, and the starter key at the START position. DO NOT start the engine.

 Pull the decompression lever up. Pull the recoil starter grip slowly. STOP when it feels tight. This closes the intake and exhaust valves (compression position) , and helps prevents ruts from forming.

 Wipe any oil or dirt that may have accumulated on the compactor.

 Store compactor in a cool dry place out of the reach of children or unauthorized personnel.

Figure 35. Fuel Filter

Troubleshooting

See Tables 8 (engine) and 9 (plate compactor) on proceeding pages for engine and plate compactor troubleshooting guide.

MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14) — PAGE 25

TROUBLESHOOTING

Practically all breakdowns can be prevented by proper handling and maintenance inspections, but in the event of a breakdown, please take a remedial action following the diagnosis based on the Engine Troubleshooting (Table 8) information shown below. If the problem cannot be remedied, please leave the unit just as it is and consult our company's business office or service plant.

l

E n g i n e d e l a y e d ,

S Y M w i a ll n tl h o t o u s g t a h r t e n o r g i n s e t a r t i s c a n b e t u r n e d o v e .r

P T O N

A t n o t l o w s t a r t e

.t

m p e r a t u r e s e n g i n e w i ll l

T A B L E 8 .

E N G I N E T R O U B L E S H O O T I N G

P O S S I B L E P R O B L E M

S p e e d c o n t r o l l e v e r i s i n " S T O P "

N o f u e l r e a c h i n g i n j e c it o n p u m p ?

D e f e c it v e f u e l p u m p ?

p o s i it o n ?

S O L U T I O N

S e t s p e e d c o n t r o l l e v e r t o " S T A R T " p o s i it o n .

A d d f u e .l

C h e c k e n t ri e f u e l s y s t e m .

R e p l a c e f u e l p u m p .

F u e l if tl e r c l o g g e d ?

F a u tl y f u e l s u p p l y il n e ?

C

F

O

L

F o o u o u li m e l w e l w i n e s s i j e c t p r e s t p r s t a r o n o s u r e it n s e p a r e m p e g r t t n t o o e m a t e s r a t u o o t o h l w o r l o p e r a a s r e s ?

o w k i n g w ?

i n

?

t u r e c o a d e q il r r e c m ti u a t e e x lt y ?

c e r e e d s i s t e d a n c e t o

R e p l a c e f u e l if tl e r a n d c l e a n t a n k .

R e p l a c e o r r e p a ri f u e l il n e .

r

C h e c k e p a ri p i s t o n , p e r e n c y g i n e il n d e r r e p a ri a n d v a l v e s .

A d j u s t m a n u a .l

o r

R e p a ri e n g i n e o r r e p l a c e i n j e c t o r r e p a ri m a n u a .l

i n a c c o r d a n c e w ti h

C h e c k e n g i n e o li p r e s s u r e .

C o m p l y w ti h c o l d s t a r it n g i n s t r u c it o n s a n d p r o p e r o li v i s c o s ti y .

C h e c k w h e t h e r c l e a r ( n o t t u r b i d ) f u e l e m e r g e s f r o p u m m p t h e

) .

fI f u e l t h e il n e f u e l i

( d e s t a c h t u r b i d f r o m o r s e i n j e c p a r a it o n t e d , w a r m u p t h e s u p p l y e n g i n e s y s t e m .

o r

R d r a i n e f u e l t h e w ti h c o m p l e t e w i n t e r f u e l g r a d e d i e s e l f u e .l

E n s t a

E n n o

L o w s p

L o e e d .

o w w s m g i n e r t e r g i n e r m a l e n g i n e s e n g i n e p e e d , p o w e r b l a c k o u t p u e x h a u s t t o k e .

f i s s t ri e s s o w p s b u b t y s ti c h e d o p e r a it o n .

p o w e t o o p s f ti s e fl

,r o u

.f

s o o n d u r i t p u t n g a a n n a s d d

E

T

F

F

F

F

F

F

F n g i n h r o t u u u u u e l e l u e l e l e l e l u e l t s if lt e t a if if a t a e o tl e r u tl e r n k l e p p n k tl e r n k li v t o e r o b l o c l y e e m m b b l o c c l o g v e n l p i t n h g e d ?

it n g i c k ?

S T k e d ?

o p t t c y k y ?

?

e k e d ?

d i s

O P

?

p o s i it o n ?

i n a d e q u a t e ?

S p e e d c s e l e c t e d o n p o t r o l s i it l e v e r o n ?

d o e s n o t r e m a i n i n

E n g i n e o li l e v e l t o o f u ll ?

A ri if tl e r b l o c k e d ?

I n c o r r e c t v a l v e c l e a r a n c e s ?

M a fl u n c it o n a t i n j e c t o r ?

f

R e if ll o r w i e n g i n e c r a n k c a s e n t e r e n v ri o n m e n .t

w ti h c o r r e c t t y p e o f o li

R e p o s i it o n t h r o t lt e l e v e r t o R U N p o s i it o n .

R e p l a c e f u e l if tl e .r

C h e c k t h e e n t ri e f u e l s y s t e m .

A d d f u e .l

R e p l a c e f u e l if tl e .r

F i ll w ti h N o .

2 d i e s e l f u e .l

R e p l a c e f u e l if tl e .r

E n s u r e t h a t t a n k i s a d e q u a t e l y v e n t e d .

S e e e n g i n e m a n u a l f o r c o r r e c it v e a c it o n .

C

C

A

S o l e d r r a n j u e e e s t c e n t o r e v a n g i r e p n e l v e s g i n e l a c e m o p e r a n li a l e ri v if e l tl

?

e e n g i n e u a .l

.r

s p e c i if c a it o n .

PAGE 26 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14)

TROUBLESHOOTING

Practically all breakdowns can be prevented by proper handling and maintenance inspections, but in the event of a breakdown, please take a remedial action following the diagnosis based on the Compactor Troubleshooting (Table 9) information shown below. If the problem cannot be remedied, please leave the unit just as it is and consult our company's business office or service plant.

S Y M P T O M

T A B L E 9 .

T R O U B L E S H O O T I N G C O M P A C T O R

P O S S I B L E C A U S E S O L U T I O N

A d j u s t o r r e p l a c e c l u t c h .

C l u t c h s il p s ?

V b e tl s il p s ?

A d j u s t o r r e p l a c e V b e l .t

T r a v e l s p e e d l o w a n d v i b r a it o n w e a k .

E x c e s s i v e O li i n v i b r a t o r ?

T r o u b l e i n v i b r a t o r i n t e r n a l s ?

F i ll t o c o r r e c t l e v e l ..

C h e c k d e f e c it v v i e b r a t o r p a r t s , a s s e m b l y r e p l a c e a f o r n y a n y d e f e c w o r n it v e p a r t s .

o r

A e r a it o n r e v e r s i n g i n h y d r s y s t e .

?

a u il c o li f o r f o r t r a v e l

E n g i n e s p e e d i n c o r r e c t ?

T r a v e l r e v e r s i n g s y s t e m i n o p e r a it v e .

?

R e v e r s i n g l e v e r i n s t a ll a it o n c o r r e c t ?

B r o k e n o r d e f e c it v e o li h o s e ?

t

T o r a v e s w l ti s c f o r w a r d h d ri e c o r it o n .

b a c k w a r d b u t u n a b l e

A e r a it o n r e v e r s i n g i n h y d r s y s t e .

?

a u il c o li f o r f o r t r a v e l

E x c e s s i v e o li i n r e v e r s i n g s y s t e m ?

S e l e c t o r v a l v e c l o g g e d w ti h t r a s h ?

D o e s n o t t r a v e l i n f o r w a r d o r r e v e r s e .

C y il n d e r p i s t o n b e a r i n g f a li u r e ?

V b e tl d i s e n g a g e d o r s il p s ?

C l u t c h s il p s ?

P u m p i n p u t d a m a g e d ?

s h a t k e y o r a d a p t e r k e y w a y

P u r g e a ri i n h y d r a u il c o i .l

( B l e e d p l u g )

S e t e n g i n e s p e e d t o c o r r e c t R P M .

C h e c k e n t ri e t r a v e l s y s t e m .

C l e a n i n s t a ll a it o n o f r e v e r s i n g l e v e .r

R e p l a c e o li h o s e .

P u r g e a ri i n h y d r a u il c o i .l

( B l e e d p l u g )

F i ll t o c o r r e c t l e v e l ..

C l e a n s e l e c t o r v a l v e .

C h e c k l e a k a g e p i s t a t o n b e a r i n g

U S H p a c k i n i n g .

c y il n d e r f o r

E n g a g e V b e l ,t a d j u s t o r r e p l a c e .

A d j u s t c l u t c h , r e p l a c e fi n e c e s s a r y .

R e p l a c e i n p u t s h a t k e y o r a d a p t e r k e y w a y

C y il n d e r p i s t o n b e a r i n g f a li u r e ?

C h e c k l e a k a g e p i s t a t o n b e a r i n g

U S H p a c k i n i n g .

c y il n d e r f o r

R e v e r s i n g g r e a .t

l e v e r o p e r a it n g r e s i s t a n c e

E x c e s s i v e h y d r a u il c o li ?

F i ll t o c o r r e c t l e v e .l

MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14) — PAGE 27

EXPLANATION OF CODE IN REMARKS COLUMN

The following section explains the different symbols and remarks used in the Parts section of this manual. Use the help numbers found on the back page of the manual if there are any questions.

NOTICE

The contents and part numbers listed in the parts section are subject to change without notice. Multiquip does not guarantee the availability of the parts listed.

SAMPLE PARTS LIST

NO. PART NO. PART NAME QTY. REMARKS

2% WASHER, 1/4 IN. ...........NOT SOLD SEPARATELY

2% 12347 WASHER, 3/8 IN. ...1 .....MQ-45T ONLY

4 12349 BEARING ..............1 .....S/N 2345B AND ABOVE

NO. Column

Unique Symbols — All items with same unique symbol

(@, #, +, %, or >) in the number column belong to the same assembly or kit, which is indicated by a note in the

“Remarks” column.

Duplicate Item Numbers — Duplicate numbers indicate multiple part numbers, which are in effect for the same general item, such as different size saw blade guards in use or a part that has been updated on newer versions of the same machine.

NOTICE

When ordering a part that has more than one item number listed, check the remarks column for help in determining the proper part to order.

PART NO. Column

Numbers Used — Part numbers can be indicated by a number, a blank entry, or TBD.

TBD (To Be Determined) is generally used to show a part that has not been assigned a formal part number

QTY. Column

Numbers Used — Item quantity can be indicated by a number, a blank entry, or A/R.

A/R (As Required) is generally used for hoses or other parts that are sold in bulk and cut to length.

A blank entry generally indicates that the item is not sold separately. Other entries will be clarified in the “Remarks”

Column.

REMARKS Column

Some of the most common notes found in the “Remarks”

Column are listed below. Other additional notes needed to describe the item can also be shown.

Assembly/Kit — All items on the parts list with the same unique symbol will be included when this item is purchased.

Indicated by:

“INCLUDES ITEMS W/(unique symbol)”

Serial Number Break — Used to list an effective serial number range where a particular part is used.

Indicated by:

“S/N XXXXX AND BELOW”

“S/N XXXX AND ABOVE”

“S/N XXXX TO S/N XXX”

Specific Model Number Use — Indicates that the part is used only with the specific model number or model number variant listed. It can also be used to show a part is NOT used on a specific model or model number variant.

Indicated by:

“XXXXX ONLY”

“NOT USED ON XXXX”

“Make/Obtain Locally” — Indicates that the part can be purchased at any hardware shop or made out of available items. Examples include battery cables, shims, and certain washers and nuts.

PAGE 28 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14)

MVH-306 W/YANMAR L-70EE DIESEL ENGINE

1 to 3 Units

Qty. ..... P/N ......................... Description

1 ......... 956100054 .............. THROTTLE WIRE

2 ......... 070200373 .............. V-BELT

3 ......... 11425012580 .......... ELEMENT W/ PRE-FILTER

1 ......... 16081076630 .......... STARTER ROPE

2 ......... 11425055121 .......... FUEL FILTER W/GASKET

1 ......... 11428855010 .......... CAP, FUEL TANK W/GASKET

1 ......... 11425035110 .......... LUBE OIL STRAINER

1 ......... 11425055100 .......... FUEL STRAINER

SUGGESTED SPARE PARTS

MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14) — PAGE 29

NAMEPLATE AND DECALS

12

OPERATIONAL CAUTION

Do not move travel lever if engine stops

STOP

RUN

START

13

8

10

11

NPA-1106

V BELT HDPF-5370

NPA-537 J

NAMEPLATE AND DECALS

5

NPA-748

J

6

3

MVH-306

0PERATIONAL CAUTION

Prior to OPERATION, check the engine oil and fuel levels. If not enough, add to proper levels.

Warm up engine at low speed for 3-5 minutes.

Operate machine at full throttle speed. (incorrect clutch engagement causes clutch to burn.)

Use travel lever for forward & reverse motion. Do not push or pull travel lever strongly.

NPA-962 J

4

DCL333 J

7

9

2

Serial No.

Model No.

SAE 10W-30

MOTOR OIL

NPA-195 J

1

PAGE 30 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14)

NAMEPLATE AND DECALS

NAMEPLATE AND DECALS

10

11

12

13

8

9

6

7

4

5

2

3

NO.

PART NO.

1 920201950

920105070

920110370

920209620

920207480

920204580

920203330

920211060

920206960

920201580

920211010

920106760

0732004460

PART NAME

DECAL: OIL SAE 10W-30

QTY.

REMARKS

1

DECAL: MIKASA LOGO ............................ 1......... ELECTRIC START MODEL ONLY

DECAL: MODEL LOGO MVH-306 1

DECAL: CAUTION

DECAL: SHELL TELLUS OIL 46

1

1

DECAL: FULL THROTTLE

DECAL: EAR PROTECTION

1

1

DECAL: CAUTION (TRAVEL LEVER) 1

DECAL: SERIAL NO. .................................. 1......... CONTACT MQ PARTS DEPT.

DECAL: MQ LOGO

DECAL: V-BELT HDPF-5370

DECAL: STOP-RUN-START

DECAL: STARTER SWITCH

1

1

1

1

MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14) — PAGE 31

VIBRATING PLATE ASSY.

VIBRATING PLATE ASSY.

PAGE 32 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14)

VIBRATING PLATE ASSY.

19

20

21

31

15

16

17

18

32

33

9

10

11

12

7

8

5

6

NO.

PART NO.

3

4

1

2

464117840

953405840

953402930

953400270

953405260

939010260

020316130

030216400

001221635

001221830

58407

030216400

939010010

020310080

031110160

030210250

464343730

011008015

030208200

52993

012218050

58407

PART NAME

VIBRATING PLATE

DRAIN PLUG MI8 (H)

COPPER PACKING 19X30X1

PLUG 1/4X14 10L

PACKING 1/4 (CU)

SHOCK ABSORBER 110X60H

NUT M16

WASHER, LOCK M16

BOLT 16X35 T

BOLT 18X30 T

WASHER, LOCK M18

WASHER, LOCK M16

SHOCK ABSORBER, STOPPER 45

NUT M10

WASHER, FLAT M10

WASHER, LOCK M10

COVER, VIBRATING PLATE

BOLT 8X15 T

WASHER, LOCK M8

EXTENSION PLATE

BOLT 18X50 T

WASHER, LOCK M18

VIBRATING PLATE ASSY.

8

4

4

8

4

4

1

4

QTY.

1

1

1

1

8

2

2

8

8

8

4

4

4

4

REMARKS

MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14) — PAGE 33

BASE AND ENGINE ASSY.

BASE AND ENGINE ASSY.

PAGE 34 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14)

BASE & ENGINE ASSY.

10

11

12

13

8

9

6

7

4

5

2

3

NO.

PART NO.

1 464117850

914410022

0105051045

030210250

031110160

464216560

011208025

030208200

031108160

464343670

464457360

456343340

951400110

38

39

40

21

35

36

37

17

18

19

20

13-1 951406790

14 952400690

15

16

001220830

030208200

464216640

092006010

464343660

464216590

001521050

464117920

456449950

011208030

030208200

031108160

022710809

PART NAME

BASE

ENGINE ASSY. L70EE (YANMAR)

BOLT 10X45 T

WASHER, LOCK M10

WASHER, FLAT M10

BELT COVER (IN)

BOLT 8X25 T

WASHER, LOCK M8

WASHER, FLAT M8

DUST-PROOF SPONGE (IN)

SPACER/MVH-306

CLUTCH ASSY./CHM03/W.FAN

KEY 7X7X35

KEY 7X7X36 RR

WASHER 9X35X4.5

BOLT 8X30 T

WASHER, LOCK M8

DUST-PROOF COVER

FLAT HEAD SCREW 6X10

DUST-PROOF SPONGE (OUT)

BELT COVER (OUT)

SOCKET HEAD BOLT 10X50 T

RUBBER COVER (GUARD FRAME)

PLATE, COVER

BOLT 8X30 T

WASHER, LOCK M8

WASHER, FLAT M8

NYLON NUT M8

BASE AND ENGINE ASSY.

3

3

3

1

1

4

1

1

1

1

3

1

1

1

1

1

1

1

1

4

4

1

4

QTY.

1

4

4

1

4

REMARKS

MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14) — PAGE 35

BASE AND ENGINE ASSY. (CONTINUED)

BASE AND ENGINE ASSY.

PAGE 36 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14)

BASE AND ENGINE ASSY. (CONTINUED)

51

52

53

59

45

46

47

48

NO.

PART NO.

41

42

43

44

459010060

459010070

459010090

459010080

0401140030

464457380

014208020

030208200

464117910

012214030

030214350

459455560

64

65

66

70

60

61

62

63

22190160002

070200373

2344600213

151010680

58151

020406040

959406800

959407260

71

72

001221015

030210250

103 464457600

104 2283720111

105 001220620

106 030206150

107 031106100

PART NAME

UNION TIP, DRAIN

DRAIN HOSE

HOSE BAND

GASKET(OIL DRAIN)

PLUG

DRAIN JOINT

BOLT 8X20 T

WASHER, LOCK M8

GUARD HOOK

BOLT 14X30 T

WASHER, LOCK M14

UNION, OIL DRAIN

SEAL WASHER 16S

V-BELT

RETURN SPRING

CLAMP CP.

WASHER, FLAT M5

NUT M6, H=4.2

NUT M6 (SPECIAL-L10)

CLIP D6 (FOR M10)

BOLT 10X15 T

WASHER, LOCK M10

EXHAUST DEFLECTOR

BAND CP

BOLT 6X20 T`

WASHER, LOCK M6

WASHER, FLAT M6

BASE AND ENGINE ASSY.

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

4

1

1

4

1

1

1

1

QTY.

2

2

1

1

REMARKS

MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14) — PAGE 37

VIBRATOR ASSY.

VIBRATOR ASSY.

PAGE 38 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14)

VIBRATOR ASSY.

NO.

PART NO.

3

4

1#

2

464117880

001221470

001221450

030214350

5#

6#

8#

9#

047920120

457212410

951405370

456327150

10# 080200550

11# 060105030

12# 951404970

13# 464343700

14# 009120301

15# 456337670

16# 009120302

17# 456337380

18# 456010010

19# 464343720

20# 040006911

21# 953010030

25# 042506000

26# 080200100

27# 455435051

28# 455010070

29# 080100260

30# 456327130

31# 456210636

33# 050101050

34# 001221025

35# 030210250

36# 011008015

37# 953404600

38# 455010020

39# 031110160

43# 952405470

46# 464343710

47# 464457370

48# 012212030

49# 030212300

51 464216600

52

53

001520852

464910020

VIBRATOR ASSY.

PART NAME

VIBRATING CASE

BOLT 14X150 T

BOLT 14X50 T

WASHER, LOCK M14

ROLLER BEARING NJ310EMC4

ROTARY SHAFT, DRIVE

KEY 15X10X39 RR

GEAR, DRIVE

STOP RING S-55

OIL SEAL SB-50729

KEY 12X8X30 R

ECCENTRIC ROTATOR

SOCKET HEAD BOLT 16X40 T

ROTARY SHAFT, DRIVEN

SOCKET HEAD BOLT 16X30 T

PISTON ROD

KNOCK PIN 10X70

GEAR (DRIVEN)

BEARING 6911

SEAL CAP/SC72-8N

BEARING 6000ZZSG

STOP RING S-10

PISTON, 22.4D

PACKING USH-22.4X30X5

STOP RING R-26

BEARING COVER

CYLINDER (L)/(AC)

O-RING G-105

QTY.

4

10

1

6

4

1

1

1

2

1

1

4

2

1

2

1

1

1

2

1

2

1

1

1

1

1

1

2

REMARKS

BOLT 10X25 T

WASHER, LOCK M10

BOLT 8X12 T

COPPER PACKING 8X16X2

ELBOW 45 DEG. 15-0404

WASHER, FLAT M10

SHIM 90X110X0.5

PULLEY

2

1

1

4

1

1

8

8

WASHER

BOLT 12X30 T

WASHER, LOCK M12

BELT COVER (LOWER)

1

1

1

1

SOCKET HEAD BOLT 8X60 T 5

VIBRATOR ASSY. ...............................................1 ............. INCLUDES ITEMS W/#

MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14) — PAGE 39

CONTROL HANDLE ASSY.

CONTROL HANDLE ASSY.

PAGE 40 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14)

35

36

37

38

27

28

29

34

22

23

25

26

18

19

20

21

45

46

47

48

39

40

43

44

49

12

13

14

15

8

9

10

11

5

7

3

4

1

2

CONTROL HANDLE ASSY.

NO.

PART NO.

464343680

456336420

012212035

030212300

031112230

456336400

456449940

456449930

001221681

032124400

025306016

0401450160

020316130

020416100

455434950

455010030

939010060

020310080

020412070

022411635

954404230

011206020

030206150

952404470

020106050

501402870

501402880

959403460

020310080

456449980

953405260

031110160

464343690

0105050616

030206150

952404470

464457710

464457720

454010020

PART NAME

HANDLE BRACKET

HANDLE BRACKET (R)

BOLT 12X35 T

WASHER, LOCK M12

WASHER, FLAT M12

RUBBER COUPLING

SHOCK ABSORBER

RUBBER PLATE

BOLT 16X250 T

CONICAL SPRING WASHER M24

SPRING PIN 6X16

WASHER, FLAT M16

NUT M16

NUT M16, H=10

SPINDLE

KNOB

SHOCK ABSORBER

NUT M10, H=6

NUT M12, H=7

WING NUT M16

CLAMP SA120-18

BOLT 6X20 T

WASHER, LOCK M6

WASHER, FLAT M6

NUT M6

HANDLE STOPPER

SPRING/HANDLE (1.4X18X44)

BALL GRIP 32D-M10

NUT M10, H=6

RUBBER PACKING 9D-20D-5T

PACKING 1/4 (CU)

WASHER, FLAT M10

HANDLE COVER

BOLT 6X15 T

WASHER, LOCK M6

WASHER, FLAT M6

PACKING A, HANDLE COVER

PACKING B, HANDLE COVER

CLAMP TC-100

CONTROL HANDLE ASSY.

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

6

6

1

6

1

1

1

1

1

2

2

1

2

2

2

QTY.

1

1

4

2

4

4

REMARKS

MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14) — PAGE 41

CONTROL HANDLE ASSY.

CONTROL HANDLE ASSY.

PAGE 42 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14)

CONTROL HANDLE ASSY.

71

72

73

80

67

68

69

70

NO.

PART NO.

61

64

65

66

464117890

464216630

464457400

012010030

030210250

464216620

030210250

031110160

020310080

011208025

030208200

464457340

94

95

96

99

89

90

91

93

85

86

87

88

81

82

83

84

959403840

464457420

464457350

001520820

031116260

458460660

033910080

464457440

464010010

001220625

020306050

464010020

001520520

031105080

020305040

954002270

101 956100054

103 454010020

104 959021815

104 959021810

PART NAME

COLUMN, HANDLE

TRAVEL LEVER

HANDLE BOSS

BOLT 10X30 T

WASHER, LOCK M10

HANDLE W/RUBBER GRIP

WASHER, LOCK M10

WASHER, FLAT M10

NUT M10

BOLT 8X25 T

WASHER, LOCK

THROTTLE LEVER

BAR GRIP I.D. 12 MM

COVER, THROTTLE

ARM, THROTTLE

SOCKET HEAD BOLT 8X20 T

WASHER, FLAT

WASHER 16.4-35-0.6

CONICAL SW 16.3 X 31.5 X 1.2

STEEL BALL D6 (SUJ)

DRY BUSHING/ LBF-1620

BOLT 6X25 T

NUT M6

ROD END M5

SOCKET HEAD BOLT 5X20 T

WASHER, FLAT M5

NUT M5

OIL HOSE W/SPRING 1/4 X 920

THROTTLE WIRE

CLAMP TC-100

SPRIAL TUBE 6D-330L

SPRIAL TUBE KEP6/ L=500

CONTROL HANDLE ASSY.

1

1

1

1

2

1

1

2

1

1

1

1

3

1

1

2

1

1

1

1

2

1

2

2

2

2

2

1

QTY.

1

2

1

1

REMARKS

MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14) — PAGE 43

HAND PUMP ASSY.

O-RING

SET

C

HAND PUMP ASSY.

84

PAGE 44 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14)

HAND PUMP ASSY.

B *

C *

2 *

3 *

4 *

9 *

10 *

11 *

NO.

PART NO.

4649-10040

464910080

464010040

464010050

22 *

26# *

27# *

28# *

48# *

49# *

81

12 *

13 *

14 *

15 *

16# *

17# *

19# *

22 *

82

464010060

464010070

099205005

464010080

464010090

464010100

458010080

001520620

050200200

050200220

050200180

464010110

464010111

050300400

050200150

050100400

069904010

069901010

984010030

984010040

83

84

984010050

464216721

HAND PUMP ASSY.

PART NAME QTY.

REMARKS

ACCUMLATOR 1

O-RING DUST,SEAL,SET ......................1 ............. INCLUDES ITEMS W/#

CONTROL SHAFT

BUSH

1

2

CAM

STOPPER

SOCKET HEAD SCREW 5X5 T

PLUG

PIN,STOPPER

PLUG

BREATHER

SOCKET HEAD BOLT 6X20 T

1

2

2

1

2

2

1

1

O-RING P-20

O-RING P-22

2

2

O-RING P-18 1

ACCUMULATOR CASE ..........................1 ............. S/N N2418 AND BELOW

ACCUMULATOR CASE ..........................1 ............. S/N N2419 AND ABOVE

O-RING S-40 1

O-RING P-15

O-RING G-40

1

1

DUST SEAL SER-40 ..............................1 ............. S/N N2419 AND ABOVE

DUST SEAL SER-15 ..............................1 ............. S/N N2419 AND ABOVE

SPRG.COMPRESSION TOOL

DISASSEMBLING TOOL A

1

1

DISASSEMBLING TOOL B 1

HAND PUMP ASSY ...............................1 ............. INCLUDES ITEMS W/ *

MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14) — PAGE 45

BATTERY ASSY. (OPTION)

BATTERY ASSY. (OPTION)

PAGE 46 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14)

BATTERY ASSY. (OPTION)

14

15

16

17

10

11

12

13

8

9

6

7

4

5

NO.

PART NO.

3 464216660

456447590

456447600

014210020

030210250

604010240

955300490

955300470

955300480

955300460

464117860

464457410

001220825

030208200

464457390

18

19

20

41

022710809

031108160

464343740

955300680

41A 955000010

41B 953406090

PART NAME

CRADLE, BATTERY

RUBBER PLATE (E) 28X240X5

RUBBER PLATE 50X240X10

SOCKET HEAD BOLT 10X20 T

WASHER, LOCK M10

BATTERY 46B24L

BATTERY TERMINAL (-)

TERMINAL COVER (-)

BATTERY TERMINAL (+)

TERMINAL COVER (+)

COVER, BATTERY

FIXED PLATE, BATTERY COVER

BOLT 8X25 T

WASHER, LOCK M8

BATTERY BOLT

NYLON NUT M8

WASHER, FLAT M8

HOLDER, BATTERY

IGNITION SWITCH ASSY.

IGNITION KEY

GROMMET 26D

BATTERY ASSY. (OPTION)

4

2

2

4

1

1

1

1

1

1

2

2

QTY.

1

1

2

1

1

2

2

1

1

REMARKS

MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14) — PAGE 47

ELECTRIC DEVICE ASSY.

ELECTRIC DEVICE ASSY.

PAGE 48 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14)

ELECTRIC DEVICE ASSY.

42

43

44

45

46

47

24

26

28

30

NO.

PART NO.

1 464457460

2

20

464457470

464343740

456439070

454010020

955300400

506010070

515450380

11468578560

105198-78570

0105050616

030206150

952404470

PART NAME

BATTERY CORD (-) 400L

BATTERY CORD (+) 550L

HOLDER, BATTERY

WIRE CP

CLAMP TC-100

BUZZER (EBL)

CLAMP TC-150

WIRE HARNESS

WIRE HARNESS

HARNESS (C), WIRE

BOLT 6X15 T

WASHER, LOCK M6

WASHER, FLAT M6

ELECTRIC DEVICE ASSY.

1

1

1

1

1

1

1

1

1

3

QTY.

1

1

1

REMARKS

MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14) — PAGE 49

CYLINDER BLOCK ASSY.

YANMAR L-70EE — CYLINDER BLOCK ASSY.

PAGE 50 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14)

YANMAR L-70EE — CYLINDER BLOCK ASSY.

CYLINDER BLOCK ASSY.

1

8 *

9 *

10

NO.

PART NO.

71487101560

11435001700

26106100122

11435001200

53

54

55

56

49

50

51

52

45

46

47

48

41

42

43

44

15

21

22

23

11

12

13

14

11435001210

11435001220

10522501240

11435001250

11487101330

11435001380

11435001412

11436801453

32

38

39

40

26 # 11435002100

28 10542501690

29 11469901760

31 $ 11429901950

11425001800

11425001830

11425001841

11425035150

11427001600

23876010000

26106080352

26226060182

26226060222

26366060002

22190160002

11429902030

11435002113

16011002220

16011002220

24162152112

26106080122

22312040080

11435002200

11435002210

PART NAME QTY.

REMARKS

BLOCK ASSY., CYLINDER .................................1 ............. INCLUDES ITEMS W/ *

COVER, STARTER 1

BOLT M10X 12 PLATED

STUD, CYL. HEAD

2

2

STUD, CYL. HEAD

NUT 9

WASHER

NUT 9

4

2

2

2

GASKET, CYL. HEAD CMP

O-RING

1

1

GASKET, CRANK CASE 1

COVER (D), CRANK CASE .................................1 ............. INCLUDES ITEMS W/ #

BEARING, MAIN

PLUG M16

1

2

CAP, W/LUB. OIL GAUGE ...................................2 ............. INCLUDES ITEMS W/ $

O-RING 2

SHIM SET

COVER, INSPEC. WINDOW

GASKET

PIPE, L.O. INLET

1

1

1

1

PARALLEL PIN 8 X 12

PLUG PT 1/8, SCREW

BOLT M 8X 35 PLATED

STUD M 6X 18 PLATED

STUD M 6X 22 PLATED

NUT M 6

SEAL WASHER 16S

RETAINER

2

1

2

3

15

1

2

1

BALL BEARING

SEAL, OIL

SEAL, OIL

NEEDLE BEARING

1

1

1

1

BOLT M 8X 12 PLATED

PIN 4 X 8, STRAIGHT

1

2

MAIN BEARING US = 0.25 .................................1 ............. UNDER SIZED PART

MAIN BEARING US = 0.50 .................................1 ............. UNDER SIZED PART

MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14) — PAGE 51

YANMAR L-70EE — CYLINDER HEAD AND COVER ASSY.

CYLINDER HEAD AND COVER ASSY.

PAGE 52 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14)

YANMAR L-70EE — CYLINDER HEAD AND COVER ASSY.

8

9

6

7

CYLINDER HEAD & COVER ASSY.

NO.

PART NO.

PART NAME

1 11487111020 CYLINDER HEAD

11487111100

11487111110

11435011120

10115811180

VALVE, SUCTION

VALVE, EXHAUST

SPRING, VALVE

RETAINER, SPRING

10

12

27310060001

11477111250

13 *

14 *

11477111260

11477111650

+ 11425011240 16 *

17 *

18 *

+ 26856060002

11477111660

20 * $

21 * $

22 *

23

11425011240

26856060002

22242000120

11435011340

24 10501011490

29

30

31

32

25

26

27

28

11477111461

11477111470

11425011600

11425011901

22351040008

26106060452

26226060602

26366060002

33

34

11477111310

11477111950

36 # 11425003591

39 # 11425003640

41 # 22312030160

44 26106060552

QTY.

1

2

2

1

1

REMARKS

COTTER ASSY 2

SUPPORT CAM, ARM ........................................1 ............. INCLUDES ITEMS W/ *

SUPPORT, ROCKER ARM 1

ARM ASSY, INTAKE ...........................................1 ............. INCLUDES ITEMS W/ +

SCREW, VALVE ADJUST.

LOCK NUT 6

1

1

ARM ASSY, EXHAUST .......................................1 ............. INCLUDES ITEMS W/ $

SCREW, VALVE ADJUST.

1

LOCK NUT 6

CIRCLIP 12

SEAL, VALVE STEM

CAP, VALVE

1

2

2

2

GASKET, NOZZLE

SPACER, NOZZLE

WASHER

RETAINER

SPRING PIN 4X 8

BOLT M 6X 45 PLATED

STUD

NUT M 6

1

1

2

1

1

2

2

2

GASKET, BONNET 1

BONNET ASSY, HEAD .......................................1 ............. INCLUDES ITEMS W/ #

SHAFT ASSY, DECOMP.

SPRING

1

1

PARALLEL PIN 3X16

BOLT M 6X 55 PLATED

1

3

MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14) — PAGE 53

MUFFLER ASSY.

YANMAR L-70EE — MUFFLER ASSY.

PAGE 54 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14)

MUFFLER ASSY.

8

9

10

11

NO.

PART NO.

1 11425013201

2 11438813600

12

*

13

*

26106060122

26216080182

26366080002

11428813800

26554060182

26367060002

YANMAR L-70EE — MUFFLER ASSY.

PART NAME

GASKET (NON — ASB.)

MUFFLER ASSY

QTY.

1

1

REMARKS

BOLT M 6X 12 PLATED

STUD M 8X 18 PLATED

2

2

NUT M 8 2

DEFLECTOR EXH ...............................................1 ............. INCLUDES ITEMS W/

*

SCREW M 6X 18 1

U — NUT M6 1

MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14) — PAGE 55

AIR CLEANER ASSY.

YANMAR L-70EE — AIR CLEANER ASSY.

PAGE 56 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14)

AIR CLEANER ASSY.

4 *

5 *

6 *

7 *

9

8 *

NO.

PART NO.

1 11425012211

2 71425012560

11425012520

10

11

12

11425012530

11465012591

11425012560

11425012550

11425012300

11439912010

11435012202

26106060252

13

14

26226060142

26226060552

YANMAR L-70EE — AIR CLEANER ASSY.

PART NAME

GASKET, AIR CLEANER

QTY.

1

REMARKS

CLEANER ASSY, AIR .........................................1 ............. INCLUDES ITEMS W/ *

COVER, AIR CLEANER 1

CASE, AIR CLEANER

ELEMENT, WET AIR

WASHER M 6, SEAL

WING — NUT, M 6

U — NUT

PIPE, AIR INTAKE

GASKET, AIR INTAKE

BOLT M 6X 25 PLATED

STUD M 6X 14 PLATED

STUD M6X 55 PLATED

1

2

3

1

1

2

1

1

1

1

MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14) — PAGE 57

YANMAR L-70EE — CRANKSHAFT, PISTON, CAMSHAFT ASSY.

CRANKSHAFT, PISTON AND CAMSHAFT ASSY.

PAGE 58 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14)

YANMAR L-70EE — CRANKSHAFT, PISTON, CAMSHAFT ASSY.

8

12

25

26

6

7

NO.

PART NO.

1 71488014580

11425014200

11477114260

11435014450

71487621730

10385401221

11425021550

29 11488121590

32 # 11436221600

33

34

22512040120

71487222720

36

42

43

44

* 71487022500

11439922300

22252000210

71438023700

55

56

57

58

47 $ 11820023200

48 $ 11438023100

49 $ 71438023600

51 71435028520

59

61

24101062024

16084221150

16084221250

16084221260

71438023610

71438023620

CRANKSHAFT, PISTON & CAMSHAFT ASSY.

PART NAME

CAMSHAFT (D) ASSY

TAPPET

TAPPET, F.O.

ROD, PUSH

CRANKSHAFT ASSY

NUT M16

WASHER, FLYWHEEL

1

1

2

1

QTY.

1

2

1

REMARKS

FLYWHEEL W/RING GEAR ............................ 1 ................. INCLUDES ITEMS W/ #

GEAR, RING 1

KEY 4X 12 1

PISTON W/RINGS .......................................... 1 ................. INCLUDES ITEMS W/ *

RING SET, PISTON 1

PISTON PIN

CIRCLIP 21

1

2

ROD ASSY, CONNECTING ............................ 1 ................. INCLUDES ITEMS W/ $

BOLT, ROD

BUSH, PISTON PIN

BEARING, CRANK PIN

SHAFT ASSY, BALANCER

BALL BEARING

KEY 6.3X50

BOLT 7/16 — 20UNF

WASHER

2

1

1

1

2

1

1

1

BEARING, PIN (U.S = 0.25) ............................ 1 .......... UNDER SIZED(U.S.=0.25)PART

BEARING, PIN (U.S = 0.50) ............................ 1 .......... UNDER SIZED(U.S.=0.50)PART

MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14) — PAGE 59

YANMAR L-70EE — LUB OIL PUMP AND GOVERNOR ASSY.

LUB. OIL PUMP AND GOVERNOR ASSY.

PAGE 60 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14)

YANMAR L-70EE — LUB OIL PUMP AND GOVERNOR ASSY.

55

56

57

58

47

48

49

54

59

60

61

30

31

33

34

21

27

28

29

6

7

NO.

PART NO.

1 11425032010

11425032070

10333832570

8

9

22312030160

26476060142

10

12 *

13

14

11425035110

24341000224

26106060162

71435061500

19 $ 22322030200

20 $ 22322030200

71477061100

11477061520

11477061600

11477061610

11477061190

11425066050

11429966100

11425066440

11487066010

11425066200

11487166550

26696100002

13521061090

22451060000

10210067080

16072578350

26106060142

26117040088

26347060002

LUB. OIL PUMP & GOVERNOR ASSY.

PART NAME

PUMP ASSY, LUB. OIL

COVER, LUB. OIL PUMP

O — RING

QTY.

1

1

1

REMARKS

PARALLEL PIN 3 X 16

BOLT M 6X 14, TAPPING

1

3

STRAINER, LUB. OIL ..................................... 1 ................. INCLUDES ITEMS W/ *

O — RING 1A S — 22.4

1

BOLT M 6X 16 PLATED 1

LEVER ASSY, GOVERNOR ........................... 1 ................. INCLUDES ITEMS W/ $

TAPER PIN 3X20

TAPER PIN 3X20

1

1

GOVERNOR ASSY

BEARING, NEEDLE

SEAL, OIL

WASHER, THRUST

1

2

1

1

WASHER

HANDLE, REGULATOR

STAY, HANDLE

BOLT, ADJUSTING

SPRING, REGULATOR

SPRING, RETURN

TORQUE SPRING ASSY

NUT M10

1

1

1

1

1

1

1

1

LEAD

WIRE 0.6

BOLT, ADJUSTING

KNOB (W/M6X15)

BOLT M 6X 14 PLATED

BOLT 4 * 8

U — NUT 6

1

1

1

1

1

2

2

MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14) — PAGE 61

YANMAR L-70EE — COOLING AND STARTING DEVICE ASSY.

COOLING AND STARTING DEVICE ASSY.

PAGE 62 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14)

YANMAR L-70EE — COOLING AND STARTING DEVICE ASSY.

COOLING & STARTING DEVICE ASSY.

8

9

10

11

6

7

4

5

2

3

NO.

PART NO.

1 11487045201

11435045320

11435045340

18372055210

26106060202

11436045101

11425045301

11425045310

11425045330

11437045351

11488076050

26

27

28

12 *

13 *

14 *

11488076250

+ 11488076510

+ 16081076520

+ 16084076530 15 *

16 * + 16081076540

+ 16084076560 17 *

18 * + 16081076580

+ 16081076620 20 *

21 * + 16081076630

+ 18113076680 22 *

23 *

24

25

*

+ 18113076700

+ 11435076590

26106060082

26106060122

11425076600

11425076610

PART NAME

COVER

RUBBER, SEAL

COLLAR

GROMMET

BOLT M 6X 20 PLATED

CASE, FAN (SILVER) (17)

RUBBER, CUSHION

1

4

1

1

QTY.

1

1

1

REMARKS

COLLAR

SEAL, FAN CASE

BOLT, FAN CASE

4

1

4

STARTER ASSY, RECOIL ............................. 1 ................. INCLUDES ITEMS W/ *

RECOIL ASSY ............................................... 1 ................. INCLUDES ITEMS W/ +

CASE, STARTER

REEL, RECOIL

RATCHET

1

1

1

SPRING, SPIRAL

SPRING, FRICTION

PLATE, FRICTION

KNOB, STARTER

ROPE, STARTER

NUT

WASHER

PULLEY, STARTER

BOLT M 6X 8 PLATED

BOLT M 6X 12 PLATED

PLUNGER

HOLDER, PLUNGER

1

1

1

1

1

1

1

1

1

1

4

3

MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14) — PAGE 63

YANMAR L-70EE — FUEL INJECTION PUMP ASSY.

FUEL INJECTION PUMP ASSY.

PAGE 64 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14)

YANMAR L-70EE — FUEL INJECTION PUMP ASSY.

FUEL INJECTION PUMP ASSY.

NO.

PART NO.

1

17 *

18 *

19 *

20 *

21 *

22

11 *

14 *

15 *

16 *

2 *

3 *

4 *

10 *

71465051100

10554651020

11425051080

11465051100

11425051160

11465051300

10554651330

11425051340

12455051350

11425051600

11425051640

11425051650

22351020006

22351030008

71487153100

23 # 11487153000

24 # 11959353080

25 # 11425053120

26 # 11959353130

27 # 11477553140

28 # 11477553210

29 # 11477553100

32 # + 11477553330

33 # 11425053400

45 11487159802

PART NAME QTY.

REMARKS

PUMP ASSY, F. INJECT. ................................ 1 ................. INCLUDES ITEMS W/ *

GASKET 1

PLATE

BODY, F.I. PUMP

1

1

SPRING

VALVE ASSY, DELIVERY

SPRING, DELIV. VALVE

HOLDER, F.I.P. DELIVE

GASKET, DELIVERY

LEVER ASSY, CONTROL

SEAT (A), SPRING

SEAT (B), SPRING

1

1

2

1

1

1

1

1

SPRING PIN 2X 6

SPRING PIN 3X 8

2

1

VALVE ASSY, F. INJECT ............................... 1 ................. INCLUDES ITEMS W/ #

NOZZLE ASSY 1

NUT, NOZZLE CASE

SPRING, NOZZLE

RETAINER, SPRING

SPACER, VALVE STOP

1

1

1

1

PIN 2

HOLDER ASSY .............................................. 1 ................. INCLUDES ITEMS W/ +

PIN

SHIM PACK

1

1

PIPE, FUEL INJECTION 1

MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14) — PAGE 65

YANMAR L-70EE — FUEL TANK AND FUEL LINE ASSY.

FUEL TANK AND FUEL PIPE ASSY.

PAGE 66 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14)

YANMAR L-70EE — FUEL TANK AND FUEL LINE ASSY.

FUEL TANK & FUEL LINE ASSY.

NO.

PART NO.

1 71435055711

3

5

6 *

7 *

13

*

*

8 *

9 *

10 *

11 *

12

#

11428855040

11428855080

11425055100

11435055150

11425055201

10385455220

23414080000

10530055080

11425055121

11425055130

22

23

24

25

26

18

19

20

21

14

15

11429955210

11439955230

16 11425055300

17 $ 24341000150

11465055810

22117080000

26106080452

26366060002

26476060142

10699044660

12472259050

11425059060

11426859061

PART NAME QTY.

REMARKS

TANK, FUEL (RED) (50) ................................. 1 ............. INCLUDES ITEMS W/ *

CAP ASSY, TANK ........................................... 1 ............. INCLUDES ITEMS W/ #

VALVE 1

STRAINER, FUEL

PIPE, GAUGE

DAMPER. FUEL TANK

CLAMP

GASKET 8, ROUND

PLUG, DRAIN

FILTER, FUEL

GASKET

1

1

1

1

4

2

1

1

STAY

STAY (B)

1

1

COCK ASSY, FUEL ........................................ 1 ............. INCLUDES ITEMS W/ $

O RING 1A S-15.0

1

BOLT, LIFTING

WASHER 8

BOLT M 8X 45 PLATED

NUT M 6

1

1

1

2

BOLT M 6X 14, TAPPING

CLIP, HOSE

CLAMP 9

PIPE, FUEL RETURN

PIPE, FUEL

2

1

2

2

1

MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14) — PAGE 67

YANMAR L-70EE — STARTING MOTOR AND DYNAMO ASSY.

STARTING MOTOR AND DYNAMO ASSY.

PAGE 68 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14)

YANMAR L-70EE — STARTING MOTOR AND DYNAMO ASSY.

STARTING MOTOR & DYNAMO ASSY.

27

28

29

30

23

24

25

26

NO.

PART NO.

1 11436277011

14 *

15 *

16 *

17 *

10 *

11 *

12 *

13 *

18 *

19

6 *

7 *

8 *

9 *

2 *

3 *

4 *

5 *

11438177110

X2114811000

X2114715500

11438177130

11438177140

11437177160

11437179040

11437179050

11437179060

X2114455080

11438177150

11437177170

X2114560130

X2114275010

X2114680050

11437179070

X2114274200

20

26106100302

11435178251

21 $ 11435178751

22 $ 11435178761

16071078710

26106060122

26476060202

26577060142

26716080002

16097077350

26106060122

18335077400

PART NAME QTY.

REMARKS

STARTER (S114 - 414A) ..................................1 ............ INCLUDES ITEMS W/ *

ARMATURE 1

WASHER KIT, THRUST

STOPPER SET, PINION

COIL ASSY, FIELD

COVER, REAR

HOLDER ASSY, BRUSH

BRUSH (-)

BRUSH (+)

SPRING, BRUSH

PINION ASSY.

HOUSING ASSY., GEAR

COVER KIT, DUST

LEVER KIT, SHIFT

SWITCH ASSY, MAGNET

BOLT, THROUGH

BOLT M 6X 37

COVER, TERMINAL

2

1

1

2

1

1

1

1

1

4

1

2

1

1

1

1

BOLT M10X 30 PLATED 2

DYNAMO ASSY. ..............................................1 ............ INCLUDES ITEMS W/ $

STATOR ASSY.

WHEEL, DYNAMO

1

1

CLAMP, CORD

BOLT M 6X 12 PLATED

BOLT M 6X 20, TAPPING

SCREW M 6X 14

1

1

3

3

NUT M 8

RECTIFIER

BOLT M 6X 12 PLATED

WIRE, LEAD

1

1

1

1

MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14) — PAGE 69

YANMAR L-70EE — TOOL, LABEL, AND GASKET ASSY.

TOOL, LABEL AND GASKET SET ASSY.

PAGE 70 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14)

YANMAR L-70EE — TOOL, LABEL, AND GASKET ASSY.

TOOL, LABEL & GASKET SET ASSY.

15

16

17

18

8

12

13

14

6

7

4

5

NO.

PART NO.

3 18325007230

11425007090

11425007111

11426807240

11426107350

11426807350

11425092600

16033092730

28110100120

28110140170

28210000150

71487192600

11487101330

23

24

25

26

19

20

21

22

11435001380

11435001412

11429901950

11425001841

22190160002

11435011340

11477111461

11477111310

27

28

29

30

11435012202

11425012211

11425013201

10333832570

31

32

11425092101

11425092130

34 # 26116060454

35 # 26116080454

36 # 26716060002

37 # 26716080002

38

39

11436892300

11435092311

40 11435092350

PART NAME

LABEL, OPERATION

LABEL, AIR COOLED

LABEL, YANMAR

LABEL, CAUTION

LABEL

LABEL, HOW TO START

BAG, TOOL

SCREWDRIVER

WRENCH 10X12

QTY.

1

1

1

1

1

1

1

1

1

REMARKS

WRENCH 14X17

FEEDER, OIL

1

1

GASKET SET ................................................ 1 ................. INCLUDES ITEMS W/ *

GASKET, CYL. HEAD CMP 1

O — RING

GASKET, CRANK CASE

O — RING

GASKET

SEAL WASHER 16S

SEAL, VALVE STEM

GASKET, NOZZLE

GASKET, BONNET

1

1

2

2

2

1

1

1

GASKET, AIR INTAKE

GASKET, AIR CLEANER

GASKET (NON — ASB.)

O — RING

1

1

1

1

F.W. LOCKING HANDLE 1

REMOVER, FLYWHEEL ................................. 1 .................. INCLUDES ITEMS W/ #

BOLT M 6X 45 PLATED

BOLT M 8X 45 PLATED

4

3

NUT 6

NUT M 8

GUIDE, OIL SEAL

INSTALLING TOOL

INSTALLING TOOL

1

1

8

6

1

MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14) — PAGE 71

TERMS AND CONDITIONS OF SALE — PARTS

PAYMENT TERMS

Terms of payment for parts are net 30 days.

FREIGHT POLICY

All parts orders will be shipped collect or prepaid with the charges added to the invoice.

All shipments are F.O.B. point of origin.

Multiquip’s responsibility ceases when a signed manifest has been obtained from the carrier, and any claim for shortage or damage must be settled between the consignee and the carrier.

MINIMUM ORDER

The minimum charge for orders from Multiquip is $15.00 net. Customers will be asked for instructions regarding handling of orders not meeting this requirement.

RETURNED GOODS POLICY

Return shipments will be accepted and credit will be allowed, subject to the following provisions:

1.

2.

3.

4.

A Returned Material Authorization must be approved by Multiquip prior to shipment.

To obtain a Return Material Authorization, a list must be provided to Multiquip

Parts Sales that defines item numbers, quantities, and descriptions of the items to be returned.

a. The parts numbers and descriptions must match the current parts price list.

b. c.

The list must be typed or computer generated.

The list must state the reason(s) for the return.

d. The list must reference the sales order ( s ) or invoice ( s ) under which the items were originally purchased.

e. The list must include the name and phone number of the person requesting the RMA.

A copy of the Return Material Authorization must accompany the return shipment.

Freight is at the sender’s expense. All parts must be returned freight prepaid to

Multiquip’s designated receiving point.

5.

6.

7.

Parts must be in new and resalable condition, in the original Multiquip package (if any), and with Multiquip part numbers clearly marked.

The following items are not returnable: a. Obsolete parts. (If an item is in the price book and shows as being replaced by another item, it is obsolete.) b. c. d. e.

Any parts with a limited shelf life

(such as gaskets, seals, “O” rings, and other rubber parts) that were purchased more than six months prior to the return date.

Any line item with an extended dealer net price of less than

$5.00.

Special order items.

Electrical components.

f. g.

Paint, chemicals, and lubricants.

Decals and paper products.

h. Items purchased in kits.

The sender will be notified of any material received that is not acceptable.

8.

9.

Such material will be held for five working days from notification, pending instructions. If a reply is not received within five days, the material will be returned to the sender at his expense.

Credit on returned parts will be issued at dealer net price at time of the original purchase, less a 15% restocking charge.

10. In cases where an item is accepted, for which the original purchase document can not be determined, the price will be based on the list price that was effective twelve months prior to the RMA date.

11. Credit issued will be applied to future purchases only.

PRICING AND REBATES

Prices are subject to change without prior notice. Price changes are effective on a specific date and all orders received on or after that date will be billed at the revised price.

Rebates for price declines and added charges for price increases will not be made for stock on hand at the time of any price change.

Multiquip reserves the right to quote and sell direct to Government agencies, and to

Original Equipment Manufacturer accounts who use our products as integral parts of their own products.

SPECIAL EXPEDITING SERVICE

A $35.00 surcharge will be added to the invoice for special handling including bus shipments, insured parcel post or in cases where Multiquip must personally deliver the parts to the carrier.

LIMITATIONS OF SELLER’S LIABILITY

Multiquip shall not be liable hereunder for damages in excess of the purchase price of the item with respect to which damages are claimed, and in no event shall Multiquip be liable for loss of profit or good will or for any other special, consequential or incidental damages.

LIMITATION OF WARRANTIES

No warranties, express or implied, are made in connection with the sale of parts or trade accessories nor as to any engine not manufactured by Multiquip. Such warranties made in connection with the sale of new, complete units are made exclusively by a statement of warranty packaged with such units, and Multiquip neither assumes nor authorizes any person to assume for it any other obligation or liability whatever in connection with the sale of its products. Apart from such written statement of warranty, there are no warranties, express, implied or statutory, which extend beyond the description of the products on the face hereof.

Effective: February 22, 2006

PAGE 72 — MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14)

NOTES

MVH306D/DS PLATE COMPACTOR — OPERATION AND PARTS MANUAL — REV. #11 (02/04/14) — PAGE 73

OPERATION AND PARTS MANUAL

HERE’S HOW TO GET HELP

PLEASE HAVE THE MODEL AND SERIAL

NUMBER ON-HAND WHEN CALLING

UNITED STATES

Multiquip Corporate Office

18910 Wilmington Ave.

Carson, CA 90746

Contact: [email protected]

Service Department

800-421-1244

310-537-3700

Technical Assistance

800-478-1244

Tel. (800) 421-1244

Fax (310) 537-3927

Fax: 310-537-4259

CANADA

Multiquip

4110 Industriel Boul.

Laval, Quebec, Canada H7L 6V3

Contact: [email protected]

Fax: 310-943-2238

Tel: (450) 625-2244

Tel: (877) 963-4411

Fax: (450) 625-8664

MQ Parts Department

800-427-1244

310-537-3700

Warranty Department

800-421-1244

310-537-3700

Fax: 800-672-7877

Fax: 310-637-3284

Fax: 310-943-2249

UNITED KINGDOM

Multiquip (UK) Limited Head Office

Unit 2, Northpoint Industrial Estate,

Globe Lane,

Dukinfield, Cheshire SK16 4UJ

Contact: [email protected]

Tel: 0161 339 2223

Fax: 0161 339 3226

© COPYRIGHT 2014, MULTIQUIP INC.

Multiquip Inc , the MQ logo are registered trademarks of Multiquip Inc. and may not be used, reproduced, or altered without written permission. All other trademarks are the property of their respective owners and used with permission.

This manual MUST accompany the equipment at all times. This manual is considered a permanent part of the equipment and should remain with the unit if resold.

The information and specifi cations included in this publication were in effect at the time of approval for printing. Illustrations, descriptions, references and technical data contained in this manual are for guidance only and may not be considered as binding. Multiquip Inc. reserves the right to discontinue or change specifi cations, design or the information published in this publication at any time without notice and without incurring any obligations.

Your Local Dealer is: