LEAPPAD™ Ultimate Quick Start Guide
Get started in 5 easy steps
Power Up and turn on your LEAPPAD™
Ultimate tablet with the included AC adapter.*
Set Up your device by following the on-screen
prompts to connect to Wi-Fi.**
• App Center/Centre — Parents can purchase digital content directly from
the device with a Parent Account password. Control your child’s access to
the App Center/Centre, where they can watch trailers and create a wish list.
Parents can choose whether children may view pricing and buy buttons.
Download your included apps.
(Only available via Wi-Fi set-up)
• Time Management — Control the amount of time your child spends on the device.
Play & Learn! Your LEAPPAD™ Ultimate tablet is
now ready for play.†
Headphone Jack Speaker Camera/Video USB
Cartridge Slot Charging Light Camera/Video
Recorder Connector/
This guide contains important information. Please keep it for
future reference. Ce guide contient des informations importantes.
Veuillez le conserver pour toute référence future.
Need help? Visit:
Home Button
Peer-to-peer gameplay uses limited communication features to permit direct
connections between two wireless LEAPPAD™ tablets that are in close proximity
to one another, using a local Wi-Fi ad hoc network. Your child is not playing on
the Internet. Instead, peer-to-peer enabled LEAPPAD tablets use local Wi-Fi
connections like an antenna – allowing play between LEAPPAD tablets that are
near each other (for example, within 100 feet/approx. 30 metres unobstructed
or less, depending on the strength of the local network – obstructions such as
walls can significantly reduce the operating range). Both users must own copies
of the same game in order to play together. Some peer-to-peer games allow
users to share information with and receive information from the other player.
The peer-to-peer feature can be activated or disabled using the Parent Settings
screen on the tablet.
• Peer-to-peer settings — Control how your child plays with other children
when two wireless LEAPPAD™ tablets are in close proximity to one another via local ad hoc Wi-Fi network. (See Local Communications below for more information.)
LEAPPAD™ Ultimate Features
Parent Guide
Control your child’s play with these interactive LEAPPAD™
Ultimate tablet features:
• Child profile — Easily manage permissions and profile information or add a
new profile.
Register your device by creating a LeapFrog
Parent Account.
Local Communications
• Wireless settings — Control connection setup and access to LeapFrogdefined online experiences.
Parent Settings
Tether Point
• Device Settings — Manage settings like language, time, date and more.
Access to Parent Settings is protected by a 4-digit parent lock code that must
be established during initial setup. Parent Settings can be accessed from the
Sign-In screen by pressing the Parent Settings icon to log in with your parent
lock. Alternatively, you can log in via the Settings icon on the Home Bar of the
child’s Home Screen.
Forgetting or resetting your Parent Lock
If you have forgotten your 4-digit parent lock code you can look it up in the Parent Account you created during device setup and registration. If
you need to reset your parent lock, you can do it from the device or reference the
FAQ section at for more information.
• The power adapter enclosure has become damaged.
• You suspect the power adapter needs service or repair.
For service information, go to:
• The external flexible cord of this transformer cannot be replaced; if the cord is
damaged, the transformer should be scrapped.
AC Adapter Safety
• The toy is only to be connected to Class II equipment bearing the following
symbol ).
CAUTION: Use only the AC adapter provided with the product.
WARNING: Not suitable for children under 3 years. Misuse of transformer
(AC Adapter) can cause electric shock. (Note: The word “transformer” is sometimes substituted for the word “adapter.”)
• Connection of the transformer to the wall outlet should be performed only by
an adult or child 8+ years of age.
• The transformer is not intended to be used as a toy, and the use of the
transformer shall be under the full supervision of parents.
• As with all electrical products, precautions should be observed during
handling and use to prevent electrical shock.
To clean AC Adapter, disconnect it from the wall and clean with a cloth
dampened with water. Do not immerse in water or use soap or other chemicals.
Allow to dry before reusing. Do not connect to the AC outlet if wet or damaged.
• This AC adapter can be used to recharge the single cell Li-Poly battery of the
LEAPFROG® LEAPPADTM Ultimate device (3.7Vdc, 3500mAh).
WARNING: DO NOT recharge non-rechargeable batteries.
For Europe - The toy must be used with a transformer for toys.
AC Adapter Electrical Ratings: Input: ~ 120VAC, 60Hz (for US); ~ 230VAC,
50Hz (for UK or EU); ~ 240VAC, 50Hz (for AS/NZL) Output:
DC5V, 1.5A,
• The power adapter may become warm during normal use. Always allow
adequate ventilation and use care when handling the power adapter.
Informations importantes de sécurité :
• Do not connect or disconnect with wet hands.
• The transformer should be periodically examined for conditions that
may result in the risk of fire, electrical shock or injury to persons, such as
damage to the cord, plug, blades, housing or other parts, and in the event
of such conditions, the transformer must not be used until the damage
is repaired. The cord of this transformer cannot be replaced; if the cord
is damaged, dispose of the transformer in accordance with your local
electrical product recycling regulations.
Veuillez lire toutes les informations importantes de sécurité avant
d’utiliser le LEAPPADTM Ultimate. Ne pas appliquer ces consignes peut
engendrer des risques d’incendie, d’électrocutions, autres blessures ou
dommages au LeapPad Ultimate ou autres.
ACCESSOIRES : Lisez les instructions pour les accessoires ou tout autre
produit avant de les utiliser avec le LeapPad Ultimate. LeapFrog n’est pas
responsable pour les accessoires vendus par d’autres fabricants et leurs
standards de sécurité.
• Instructions to parents: “Transformers and power supplies for toys are not
intended to be used as toys, and the use of these products by children shall
be under the full supervision of parents.”
ne présente pas de danger. Dans le cas contraire (par exemple, s’il est cassé à
certains endroits), tenez ce jouet hors de portée des enfants.
Unplug the AC Adapter (transformer) if any of the
following conditions exist:
• The power cord or plug, or the USB cord has become frayed or damaged.
• The power adapter is exposed to rain, liquid, or excessive moisture.
ATTENTION : Vérifiez régulièrement que ce jouet est en bon état et qu’il
ATTENTION : L’adaptateur ou le câble USB peuvent provoquer un risque
d’étranglement. Ne convient pas aux enfants de moins de 3 ans.
Wi-Fi connection support. If you experience any difficulty with Wi-Fi
connectivity, troubleshooting suggestions are available at
For indoor, dry-location use only. Do not use the product near a sink
or other wet locations. Take care not to spill food or any kind of liquid on this
product as it may render it inoperable and not serviceable. In case the unit
does get wet, unplug all cables and turn it OFF. Allow to dry thoroughly before
reusing. Do not attempt to dry with a hair dryer or other heat source. Do not
re-connect to the AC outlet if wet or damaged.
Avoid prolonged exposure to extreme temperatures and
direct sunlight. Operate in places with temperatures ranging from
5°C (40°F) and 38°C (100°F). Do not leave the product in your car as the
temperatures in parked cars can exceed the acceptable storage temperature.
Exposure to extreme temperatures can result in shortened battery life or cause
the product to temporarily stop working.
Handle with care. To avoid injury, damage to this product or other property,
avoid dropping and never disassemble, crush, puncture, microwave, incinerate,
insert foreign objects or paint the product. Clean your hands before handling
the product if they have been exposed to suntan lotions or other chemicals.
Cleaning. Disconnect all cords before cleaning. Clean the product with a
slightly damp cloth (cold water). Do not use soap, detergent or other chemicals.
Never submerge the unit in water. Allow to dry thoroughly before re-use.
*Registration and setup can continue while charging—charging may take up to 5 hours. **For non-WiFi USB setup, see end of Guide. †Full setup may take 20 minutes or longer depending on Wi-Fi speed.
If the product has been in contact with liquids, punctured, or subjected to a
severe impact or fall, immediately remove this product from use and contact
LeapFrog Consumer Services.
Operating Instructions
Do not connect to the AC wall outlet if wet or damaged.
ATTENTION : Si pour quelque raison que ce soit, l’écran (d’affichage) est
brisé ou fendu, mettez immédiatement ce produit hors de portée des enfants.
Une exposition durable à des sonorités trop fortes
peut entraîner une perte définitive de l’ouïe. Lorsque vous utilisez le casque ou
les écouteurs bouton, il est conseillé de baisser le volume et réduire le temps
d’écoute. Réglez le son lorsque vous êtes dans un endroit calme et baissez-le si
vous n’entendez pas les personnes qui parlent autour de vous. Limitez le temps
d’écoute à 90 minutes, puis accordez-vous un moment de tranquillité. Plus le
volume est élevé, plus il y a de chances que votre ouïe soit rapidement touchée.
En cas de bourdonnement dans les oreilles ou si vous entendez des voix sourdes,
arrêtez immédiatement d’écouter ce produit et faites contrôler votre ouïe dans
les plus brefs délais.
Lorsque vous utilisez une tablette, il est possible que la répétition de certains
gestes ou le fait de maintenir une certaine position pendant une longue période
de temps peut entraîner une sensation d’inconfort dans les mains, le cou, les
épaules ou d’autres parties du corps. Vous pouvez réduire cette sensation
d’inconfort et les lésions causées par les gestes répétitifs en utilisant la tablette
dans une position confortable et en faisant des pauses de 10 à 15 minutes
toutes les heures. Si vous éprouvez une sensation d’inconfort prolongée, cessez
l’utilisation et consultez un médecin.
ATTENTION : La pile rechargeable lithium ne peut être retirée de ce
produit. Pour votre sécurité, n’essayez jamais de retirer la pile. Si vous avez
des problèmes concernant la pile ou la batterie de votre produit, veuillez
contacter le service client LeapFrog. Les coordonnées sont disponibles à
Recharger les piles
LEAPPADTM Ultimate est équipé d’une pile lithium-polymère. Branchez-le
avec l’adaptateur pendant 4 heures avant de l’utiliser. Le recharger avec un
ordinateur prendra plus de temps.
L’adaptateur et le cordon USB peuvent constituer un risque
d’étranglement. Ils ne doivent pas être utilisé par les enfants de moins de 3 ans
Ne convient pas aux enfants de moins de 36 mois. L’utilisation
inadaptée de l’adaptateur peut causer une électrocution.
La pile ne doit être chargée que par un adulte ou enfants
de plus de 8 ans sous la supervision d’un parent exclusivement. Vous
pouvez recharger la pile en utilisant l’adaptateur ou en connectant le
produit à votre ordinateur avec le câble USB fournis. Nous recommandons
l’utilisation de ceux inclus.
Instructions opérationnelles
ATTENTION : N’utilisez jamais la tablette en faisant du vélo ou en étant sur
A utiliser uniquement en intérieur, dans un endroit sec. Ne pas
utiliser le produit près d’un lavabo ou autres sources d’eau. Faites attention à
ne pas renverser de nourriture ou tout autre sorte de liquide sur ce produit car
cela pourrait le rendre inopérationnel et inutilisable. Si vous renversez du liquide
sur le produit, débranchez tous les câbles et éteignez-le. Laissez le produit
sécher complètement avant de le réutiliser. N’essayez pas de le sécher avec un
sèche-cheveux ou tout autre source de chaleur. Ne pas rebrancher le produit à
l’adaptateur si celui-ci est humide ou abimé.
Maintenez l’appareil à une distance d’au moins 15 cm d’un
stimulateur cardiaque et autres appareils médicaux similaires qui peuvent être
sensibles aux consoles qui contiennent des aimants et émettent des champs
une machine ou un jeu mécanique.
ATTENTION : Il est rare mais possible que les lumières clignotantes ou les
formes provoquent des crises d’épilepsies. Jouez/regardez dans une pièce bien
éclairée et prenez des poses de 10 à 15 minutes toutes les heures.
Remplacement des piles
Connexion Wi-Fi. Si vous avez des difficultés à vous connecter à votre
connexion Wi-Fi, des aides sont disponibles en ligne à
Important Safety Instructions:
Please read all the Important Safety Instructions prior to using LEAPPAD™
Ultimate. Failure to follow these safety instructions could result in fire, electric
shock, or other injury or damage to LeapPad Ultimate tablet or other property.
Never use the tablet while riding a bicycle or operating
mechanical games or machinery.
When using a tablet device, it is possible that repetition of certain motions
or remaining in certain positions over for long periods of time may cause
discomfort in the hands, neck, shoulders, or other parts of the body. Reduce risk
of discomfort and repetitive motion injuries by using the tablet in a comfortable
position and taking a 10 to 15 minute break every hour. If you experience any
injury or ongoing discomfort, stop use and see a physician.
CAUTION: Keep the device at least 6” (15cm) away from pacemakers and
other similar medical devices that may be sensitive to devices that contain
magnets and emit electromagnetic fields.
ACCESSORIES: Please read all safety instructions for any accessories or
other products before using with the LEAPPAD™ Ultimate tablet. LeapFrog is
not responsible for the operation of third-party accessories or their compliance
with safety and regulatory standards.
Routinely check this toy for proper and safe condition. If there is
any damage or broken parts, remove toy from use.
WARNING: The AC Adapter or USB cords could be a strangulation hazard.
Not for children under 3 years.
If for any reason the screen (display) is fractured or cracked,
immediately remove this product from use.
Long-term exposure to loud sounds, at high
volume, may result in permanent hearing loss. When using headphones or ear
buds, it is recommended that the product is listened to at lower volumes for
shorter periods of time. Set the volume while in a quiet environment; turn the
volume down if you cannot hear people speaking near you. Limit the listening
time to 90 minutes, followed by a quiet period. The louder the volume, the less
Évitez d’exposer le produit à des températures extrêmes ou aux
rayons du soleil. Utilisez le produit quand la temp rature se trouve entre
5ºC (40ºF) et 38ºC (100ºF). Ne pas laisser le produit dans votre voiture car
les voitures garées peuvent excéder les températures pour assurer le bon
fonctionnement de votre produit. Exposer ce produit à des températures
extrêmes peut diminuer la durée de vie des piles ou peut entrainer l’arrêt de
votre produit.
A utiliser soigneusement. Pour éviter toutes blessures, dommages ou
autres, évitez de le faire tomber et ne jamais le démonter, casser, trouer, mettre
aux micro-ondes, bruler, incérer un objet ou peindre le produit. Lavez vos mains
avant de manipuler le produit si celles-ci ont été en contact avec de la crème
solaire ou autres produits chimiques.
Pour nettoyer. Débranchez le produit de tous ces câbles. Nettoyez le produit
avec un chiffon légèrement humide (eau froide). N’utilisez pas de savon, de
lessive ou autres produits chimiques. Ne jamais immerger le produit dans l’eau.
Ne pas brancher à une prise si le produit est humide ou endommagé.
time required before your hearing may be affected. If you experience ringing in
your ears or hear muffled speech, stop listening and have your hearing checked.
Note : Maximum output voltage ≤ 150mV
It is rare but possible for seizures to be triggered by light flashes
or patterns. Play/watch in a well-lit room and take 10- to 15-minute breaks every
Battery Replacement
The lithium rechargeable battery cannot be removed from the
product. For your safety, never try to remove the battery. For power or battery
issues, please contact LeapFrog customer support. Contact information for your
local support is available at
Battery Charging
The LeapPad Ultimate tablet is equipped with a rechargeable lithium-polymer
battery. It will require about 5 hours of charging using the included AC power
adapter prior to first use. Attempting to charge via connection to the computer
will take much longer. CAUTION:
The battery is only to be charged by adults or children 8+ years
of age under the full supervision of parents. You can charge the battery by using
either the included AC power adapter or connecting the provided USB cord to
your computer. We recommend using the provided AC power adapter.
Battery Charging in Progress Indication
When the battery is charging, the charge indicator LED will be yellow. When
fully charged, it will turn green. It will be OFF if not connected via USB or if not
Charge the device in a well-ventilated area only. While charging the device do
not cover it with anything such as a blanket, pillow or your child’s body. Never allow your child to sleep with or on the device while it is charging.
Repairing or Modifying LEAPPAD™ Ultimate
Never attempt to repair or modify the LEAPPADTM Ultimate tablet. Contains no user-serviceable parts. Service should only be provided by LeapFrog Enterprises, Inc.
Informations de sécurité pour l’adaptateur
Utilisez uniquement l’adaptateur recommandé
(transformateur) pour recharger la pile. (Note : le mot transformateur est, des
fois, remplacé par le mot adaptateur.) Utilisez uniquement l’adaptateur fourni.
Ne convient pas aux enfants de moins de 3 ans. Une
utilisation inappropriée du transformateur (adaptateur) peut causer un risque
• L’adaptateur doit être branché à la prise murale par un adulte ou un enfant de
plus de 8 ans uniquement.
• Ce transformateur n’est pas un jouet, et son utilisation doit être faite
uniquement sous la présence d’un adulte.
• Comme avec tous produits électriques, des précautions doivent être utilisées
pour éviter des électrocutions.
• Le transformateur peut chauffer pendant son utilisation normale. Vérifiez que
la ventilation est adaptée et faites attention quand vous utilisez ce produit.
Indication de chargement de la pile
Quand la pile se recharge, l’indicateur LED est jaune. Quand la pile est
totalement chargée, l’indicateur devient vert. L’indicateur ne fonctionnera pas si
le produit n’est pas connecté au câble USB ou s’il ne charge pas.
Chargez l’appareil dans un endroit bien aéré seulement. Pendant le chargement
de l’appareil ne le couvrez pas avec quelque chose comme une couverture,
un oreiller ou même le corps de votre enfant). Ne laissez jamais votre enfant
dormir avec l’appareil en cours de chargement.
Réparer ou modifier LEAPPAD™ Ultimate
N’essayez jamais de réparer ou modifier le LeapPad Ultimate – car celui-ci ne
contient aucune pièce qui peut être réparée individuellement. Toute aide doit
être faite par LeapFrog Enterprises, Inc.
Si le produit a été en contact avec du liquide, troué, ou victime d’un impact fort ou est
tombé, arrêter son utilisation immédiatement et contactez le service client LeapFrog.
• Ne branchez ou débranchez pas le produit avec des mains mouillées.
• Le transformateur doit être vérifié régulièrement (les lames, la prise, la prise
murale et tout autre pièce) car si celui-ci est endommagé, il peut être un risque
d’incendie, d’électrocution ou autres blessures. Si celui-ci est abimé, arrêtez
de l’utiliser immédiatement et attendez que celui-ci soit réparé avant de le
réutiliser. Le câble de cet adaptateur ne peut pas être remplacé, si le câble est
abimé, jetez le transformateur en suivant les règles de recyclage de votre région.
Débranchez l’adaptateur (transformateur) si l’une de ces
conditions existe :
• Le câble, la prise ou le câble USB est abimé ou cassé.
• Le câble, la prise ou le câble USB sont exposés à la pluie, à du liquide ou une
humidité excessive.
• La boite de protection de l’adaptateur est abimée.
• Si vous pensez que l’adaptateur a besoin d’être réparé.
Débranchez le LEAPPAD™ Ultimate de l’adaptateur avant de le nettoyer.
• Pour nettoyer l’adaptateur, débranchez–le de la prise murale et nettoyez-le
avec un chiffon légèrement humide. Ne l’immergez pas dans l’eau, n’utilisez
pas de savon ou autres produits chimiques. Laissez le produit sécher avant de
le réutiliser. Ne pas brancher l’adaptateur si celui-ci est mouillé ou abimé.
• Ce jouet doit être utilisé avec un adaptateur pour jouets. Cet adaptateur doit
exclusivement être utilisé pour recharger la pile Li-Poly de la tablette LeapPad
Ultimate LeapFrog (3.7Vdc, 4000mAh).
ATTENTION : NE PAS RECHARGER des piles non rechargeables.
Pour l’Europe, ce jouet doit être utilisé avec un adaptateur pour jouets.
Caractéristiques électriques de l’adaptateur secteur : Voltage d’entrée 120 VAC,
60 Hz (pour les États-Unis et Canada); 230 VAC, 50 Hz (Pour le Royaume-Uni
et l’Europe); 240 VAC, 50Hz (pour l’Australie et la Nouvelle Zélande). Voltage de
sortie : DC5V, 1.5A, 7.5VA.
Exposure to Radio Frequency Energy
LeapPad Ultimate contains a radio transmitter and receiver. When powered
ON, the LeapPad Ultimate tablet sends and receives radio frequency (RF)
energy through its internal antenna. The exposure requirements use units of
measurement termed SAR (specific absorption rate). The LEAPPAD™ Ultimate
tablet has been tested and found to meet the SAR exposure requirements for
Wi-Fi operation as established by FCC, IC, and European Union guidelines. The
LeapPad Ultimate tablet has been tested when positioned at 0 mm from the
body, without any metal parts in the vicinity of the LeapPad Ultimate tablet and
when properly used with an appropriate LEAPFROG™ Accessory.
FCC Compliance Statement
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Note: Changes or modifications to this unit not expressly approved by
LeapFrog could void the EMC and wireless compliance and void the user’s
authority to operate the equipment. This product demonstrated EMC
compliance using compliant peripheral devices and shielded cables between
system components. It is important that you use compliant peripheral devices
and shielded cables to reduce the possibility of causing interference to radios,
televisions, and other electronic devices.
Responsible party for FCC Part 15 Declaration of Conformity : VTech Electronics
North America, LLC. 1156 W Shure Drive, Suite 200, Arlighton Heights, IL
60004. Phone: (847) 4003600.
USB Cable
The USB cable provided with this product complies with FCC and other
regulatory Emission limits. If using other than the provided USB cable, please note that
in order not to exceed FCC and other regulatory emissions limits, a shielded cable
must be used.
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
2. this device must accept any interference, including interference that may
cause undesired operation of the device.
entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to
work written entirely by you; rather, the intent is to exercise the right to control
the distribution of derivative or collective works based on the Program.
In addition, mere aggregation of another work not based on the Program with
the Program (or with a work based on the Program) on a volume of a storage
or distribution medium does not bring the other work under the scope of this
3. You may copy and distribute the Program (or a work based on it, under Section
2) in object code or executable form under the terms of Sections 1 and 2 above
provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable source
code, which must be distributed under the terms of Sections 1 and 2 above on a
medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three years, to give any
third party, for a charge no more than your cost of physically performing source
distribution, a complete machine-readable copy of the corresponding source
code, to be distributed under the terms of Sections 1 and 2 above on a medium
customarily used for software interchange; or,
c) Accompany it with the information you received as to the offer to distribute
corresponding source code. (This alternative is allowed only for noncommercial
distribution and only if you received the program in object code or executable
form with such an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for making
modifications to it. For an executable work, complete source code means
all the source code for all modules it contains, plus any associated interface
definition files, plus the scripts used to control compilation and installation of the
executable. However, as a special exception, the source code distributed need
not include anything that is normally distributed (in either source or binary form)
with the major components (compiler, kernel, and so on) of the operating system
on which the executable runs, unless that component itself accompanies the
If distribution of executable or object code is made by offering access to copy
from a designated place, then offering equivalent access to copy the source code
from the same place counts as distribution of the source code, even though third
parties are not compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense, or distribute the Program except as
expressly provided under this License. Any attempt otherwise to copy, modify,
sublicense or distribute the Program is void, and will automatically terminate
your rights under this License. However, parties who have received copies, or
rights, from you under this License will not have their licenses terminated so long
1. this device may not cause interference, and
Le présent appareil est conforme aux CNR d’Industrie Canada applicables
aux appareils radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes :
as such parties remain in full compliance.
5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program
or its derivative works. These actions are prohibited by law if you do not accept
this License. Therefore, by modifying or distributing the Program (or any work
based on the Program), you indicate your acceptance of this License to do
so, and all its terms and conditions for copying, distributing or modifying the
Program or works based on it.
6. Each time you redistribute the Program (or any work based on the Program),
the recipient automatically receives a license from the original licensor to copy,
distribute or modify the Program subject to these terms and conditions. You
may not impose any further restrictions on the recipients’ exercise of the rights
granted herein. You are not responsible for enforcing compliance by third parties
to this License.
7. If, as a consequence of a court judgment or allegation of patent infringement
or for any other reason (not limited to patent issues), conditions are imposed
on you (whether by court order, agreement or otherwise) that contradict the
conditions of this License, they do not excuse you from the conditions of this
License. If you cannot distribute so as to satisfy simultaneously your obligations
under this License and any other pertinent obligations, then as a consequence
you may not distribute the Program at all. For example, if a patent license would
not permit royalty-free redistribution of the Program by all those who receive
copies directly or indirectly through you, then the only way you could satisfy both
it and this License would be to refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under any particular
circumstance, the balance of the section is intended to apply and the section as a
whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any patents or other
property right claims or to contest validity of any such claims; this section has
the sole purpose of protecting the integrity of the free software distribution
system, which is implemented by public license practices. Many people have
made generous contributions to the wide range of software distributed through
that system in reliance on consistent application of that system; it is up to the
author/donor to decide if he or she is willing to distribute software through any
other system and a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a
consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in certain countries
either by patents or by copyrighted interfaces, the original copyright holder
who places the Program under this License may add an explicit geographical
distribution limitation excluding those countries, so that distribution is permitted
1. l’appareil ne doit pas produire de brouillage, et
2. l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le fonctionnement.
In the unlikely event of an electrostatic discharge, the unit may malfunction and
lose memory, requiring the user to reset the device by turning the power OFF by
holding the Power Button for 10 seconds until the unit turns off, then press and
hold the Power Button for 3 seconds to turn on the unit again.
Canadian Compliance
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes : (1) l’appareil ne doit pas produire de brouillage,
et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
For information on how this product might be recycled, visit
recycle or call (800) 701-5327. UK Consumer Support: +44 (0)1702 200244. Certification and Compliance
U.S. Model: 6020 FCC ID: G2R-6020
Canada Model: 6020 IC: 1135D-6020
EU Declaration of Conformity
Hereby, LeapFrog Enterprises, Inc. declares that the radio equipment type 6020
is in compliance with Directive 2014/53/EU. The full text of the EU declaration
of conformity is available at the following internet address :
Environmental Phenomena
The unit may malfunction if subjected to radio-frequency interference. It should
revert to normal operation when the interference stops. If not, it may become
necessary to turn the power OFF and then back ON.
only in or among countries not thus excluded. In such case, this License
incorporates the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions of the
General Public License from time to time. Such new versions will be similar in
spirit to the present version, but may differ in detail to address new problems or
Each version is given a distinguishing version number. If the Program specifies
a version number of this License which applies to it and “any later version”, you
have the option of following the terms and conditions either of that version or of
any later version published by the Free Software Foundation. If the Program does
not specify a version number of this License, you may choose any version ever
published by the Free Software Foundation.
10. If you wish to incorporate parts of the Program into other free programs
whose distribution conditions are different, write to the author to ask for
permission. For software which is copyrighted by the Free Software Foundation,
write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of
all derivatives of our free software and of promoting the sharing and reuse of
software generally.
Copyrighted Software
Certain software included in this product contains copyrighted software that is licensed under the General Public License (GPL). A copy of that license is included at
Anyone may obtain from us the complete corresponding source code for the
software covered by the GPL for a period of three years after our last shipment
of this product by contacting LeapFrog customer service at support@leapfrog.
Please write “GPL source code for LeapPad Ultimate” in the subject line of your
email. We reserve the right to charge a reasonable fee to cover the costs of
shipping and the physical media on which the source code is loaded.
**For non-Wi-Fi setup, use the included USB cable and install the LeapFrog
Connect Application onto your computer. Go to to download.
To prevent possible hearing damage, do not listen at high volume levels for long periods.
Pour éviter des problèmes d’ouïe possible, n’utilisez pas les niveaux sonores
élevés pendant une période prolongée.
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth
Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute
verbatim copies of this license document, but changing it is not allowed.
The licenses for most software are designed to take away your freedom to
share and change it. By contrast, the GNU General Public License is intended
to guarantee your freedom to share and change free software--to make sure
the software is free for all its users. This General Public License applies to most
of the Free Software Foundation’s software and to any other program whose
authors commit to using it. (Some other Free Software Foundation software is
covered by the GNU Lesser General Public License instead.) You can apply it to
your programs, too.
When we speak of free software, we are referring to freedom, not price. Our
General Public Licenses are designed to make sure that you have the freedom
to distribute copies of free software (and charge for this service if you wish),
that you receive source code or can get it if you want it, that you can change the
software or use pieces of it in new free programs; and that you know you can do
these things.
To protect your rights, we need to make restrictions that forbid anyone to deny
you these rights or to ask you to surrender the rights. These restrictions translate
to certain responsibilities for you if you distribute copies of the software, or if you
modify it.
For example, if you distribute copies of such a program, whether gratis or for a
fee, you must give the recipients all the rights that you have. You must make
sure that they, too, receive or can get the source code. And you must show them
these terms so they know their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer
you this license which gives you legal permission to copy, distribute and/or
modify the software.
Also, for each author’s protection and ours, we want to make certain that
everyone understands that there is no warranty for this free software. If the
software is modified by someone else and passed on, we want its recipients to
know that what they have is not the original, so that any problems introduced by
others will not reflect on the original authors’ reputations.
Finally, any free program is threatened constantly by software patents. We wish
to avoid the danger that redistributors of a free program will individually obtain
patent licenses, in effect making the program proprietary. To prevent this, we
have made it clear that any patent must be licensed for everyone’s free use or not
licensed at all.
The precise terms and conditions for copying, distribution and modification
0. This License applies to any program or other work which contains a notice
placed by the copyright holder saying it may be distributed under the terms of
this General Public License. The “Program”, below, refers to any such program
or work, and a “work based on the Program” means either the Program or
any derivative work under copyright law: that is to say, a work containing
the Program or a portion of it, either verbatim or with modifications and/or
translated into another language. (Hereinafter, translation is included without
limitation in the term “modification”.) Each licensee is addressed as “you”.
Activities other than copying, distribution and modification are not covered
by this License; they are outside its scope. The act of running the Program is
not restricted, and the output from the Program is covered only if its contents
constitute a work based on the Program (independent of having been made by
running the Program). Whether that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of the Program’s source code as
you receive it, in any medium, provided that you conspicuously and appropriately
publish on each copy an appropriate copyright notice and disclaimer of warranty;
keep intact all the notices that refer to this License and to the absence of any
warranty; and give any other recipients of the Program a copy of this License
along with the Program.
You may charge a fee for the physical act of transferring a copy, and you may at
your option offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion of it,
thus forming a work based on the Program, and copy and distribute such
modifications or work under the terms of Section 1 above, provided that you also
meet all of these conditions:
a) You must cause the modified files to carry prominent notices stating that you
changed the files and the date of any change.
b) You must cause any work that you distribute or publish, that in whole or in
part contains or is derived from the Program or any part thereof, to be licensed as
a whole at no charge to all third parties under the terms of this License.
c) If the modified program normally reads commands interactively when run, you
must cause it, when started running for such interactive use in the most ordinary
way, to print or display an announcement including an appropriate copyright
notice and a notice that there is no warranty (or else, saying that you provide a
warranty) and that users may redistribute the program under these conditions,
and telling the user how to view a copy of this License. (Exception: if the Program
itself is interactive but does not normally print such an announcement, your work
based on the Program is not required to print an announcement.)
These requirements apply to the modified work as a whole. If identifiable
sections of that work are not derived from the Program, and can be reasonably
considered independent and separate works in themselves, then this License,
and its terms, do not apply to those sections when you distribute them as
separate works. But when you distribute the same sections as part of a whole
which is a work based on the Program, the distribution of the whole must be on
the terms of this License, whose permissions for other licensees extend to the
TM & © 2017 LeapFrog Enterprises, Inc. All rights reserved.
Recommended for children ages 3-9 years.
Convient aux enfants de 3 à 9 ans.
Model: 6020
LeapFrog Enterprises, Inc.
6401 Hollis Street, Suite 100
Emeryville, CA 94608
(800) 701-LEAP (5327)
TM & © 2017 VTech Holdings Limited.
All rights reserved.
Printed in China.
US 91-003340-002
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF