LC-19A35X-BK LC-19A35X-WH
MODEL
LC-19A35X-BK
LC-19A35X-WH
LCD COLOUR TELEVISION
OPERATION MANUAL
Cover_19A35X.indd 1
2008-2-29 10:05:04
Cover2_19A35X.indd 1
2008-2-29 10:05:40
OPERATION MANUAL
Dear SHARP customer
Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of
trouble-free operation of your product, please read the Important Safety Precautions carefully before
using this product.
Contents
Introduction
Dear SHARP customer ................................................................................................ 1
Contents ....................................................................................................................... 1
Important Safety Precautions ..................................................................................... 3
Supplied accessories .................................................................................................. 4
Trademarks .................................................................................................................. 4
Preparation
Attaching the stand ..................................................................................................... 5
Part names ................................................................................................................... 6
TV (Front/Side) ................................................................................................. 6
TV (Rear) ........................................................................................................... 7
Remote control unit.......................................................................................... 8
Before turning on the power ....................................................................................... 9
Connecting external devices .................................................................................... 10
Connecting a VCR, game console or camcorder .......................................... 10
Connecting a DVD player ............................................................................... 10
Connecting a Digital TV STB (Set Top Box) ................................................... 11
Connecting a PC ............................................................................................ 11
Inserting the batteries ............................................................................................... 12
Using the remote control unit ................................................................................... 12
Cautions regarding the remote control unit ................................................... 12
Turning the TV on/off................................................................................................. 13
Turning on the power ..................................................................................... 13
Turning off the power ..................................................................................... 13
About Menu operations ............................................................................................. 14
What is Menu? ............................................................................................... 14
Basic Menu operations .................................................................................. 14
About Guide Display ...................................................................................... 14
TV/AV input mode menu items ...................................................................... 15
PC input mode menu items ........................................................................... 15
Watching TV
Setting channels automatically ................................................................................ 16
Selecting programmes .............................................................................................. 17
Adjusting the volume ................................................................................................. 17
Menu language settings ............................................................................................ 17
Setting channels to your preference........................................................................ 18
Auto search .................................................................................................... 18
Manual setting for each channel .................................................................... 18
Sorting programmes ...................................................................................... 20
Erasing programmes ...................................................................................... 21
Labelling programmes ................................................................................... 21
Useful viewing functions ........................................................................................... 22
Returning to the previously selected channel ................................................ 22
Freezing the image ......................................................................................... 22
Muting the audio temporarily ......................................................................... 22
Outputting only audio..................................................................................... 22
Switching the analogue audio format ............................................................ 23
Password setting for the child lock (For TV input mode) ............................... 24
1
19A35X_en_a.indd 1
2008-2-29 10:06:22
Contents
Watching TV (Continued)
Energy conservation settings ................................................................................... 25
Auto power-off at a designated time ............................................................. 25
Auto power-off after the end of broadcast .................................................... 25
Auto power-off when there are no operations performed ............................. 25
Power Management ....................................................................................... 26
Picture size settings .................................................................................................. 27
Selecting the Wide Screen Signalling (WSS) picture size automatically ........ 27
Selecting the Wide Screen Signalling (WSS) picture size manually ............... 27
Selecting the picture size manually ................................................................ 28
Selecting a preset AV MODE .................................................................................... 29
Manual picture settings............................................................................................. 30
Picture adjustment ......................................................................................... 30
Advanced picture settings ............................................................................. 31
Other picture settings................................................................................................ 32
DNR (Digital Noise Reduction) ....................................................................... 32
Adjusting the image position.......................................................................... 32
Rotating the image ......................................................................................... 32
Audio adjustment ....................................................................................................... 33
Settings when using external devices
Settings when using HDMI output devices ............................................................. 34
Selecting input source............................................................................................... 35
Labelling input sources ............................................................................................. 35
Colour system settings ............................................................................................. 36
Connecting a PC
Displaying a PC image on the screen ...................................................................... 37
Selecting the picture size ............................................................................... 38
Adjusting the PC image automatically ........................................................... 39
Adjusting the PC image manually .................................................................. 39
Input resolution settings ........................................................................................... 40
Selecting the input resolution......................................................................... 40
PC Control of the TV .................................................................................................. 41
PC compatibility chart ............................................................................................... 42
RS-232C commands list ............................................................................................ 42
Teletext function
About Teletext ............................................................................................................ 43
Displaying Subtitles ................................................................................................... 44
Displaying Subpages ................................................................................................. 44
Teletext language setting.......................................................................................... 45
Appendix
Troubleshooting ......................................................................................................... 46
Reset ........................................................................................................................... 47
Specifications............................................................................................................. 48
Dimensional drawings ............................................................................................... 49
CLEARING THE PASSWORD .................................................................................... 50
2
19A35X_en_a.indd 2
2008-2-29 10:06:23
Important Safety Precautions
• Cleaning — Unplug the AC cord
from the AC outlet before cleaning
the product. Use a damp cloth to
clean the product. Do not use liquid
cleaners or aerosol cleaners.
• Water and moisture — Do not use
the product near water, such as
bathtub, washbasin, kitchen sink,
laundry tub, swimming pool and in
a wet basement.
• Do not place vases or any other
water-filled containers on this product.
The water may spill onto the product
causing fire or electric shock.
• Stand — Do not place the product
on an unstable cart, stand, tripod
or table. Doing so can cause the
product to fall, resulting in serious
personal injuries as well as damage
to the product. Use only a cart,
stand, tripod, bracket or table
recommended by the manufacturer
or sold with the product. When
mounting the product on a wall, be
sure to follow the manufacturer's
instructions. Use only the mounting
hardware recommended by the
manufacturer.
• When relocating the product
placed on a cart, it must be moved
with utmost care. Sudden stops,
excessive force and uneven floor
surface can cause the product to fall
from the cart.
• Ventilation — The vents and other
openings in the cabinet are designed
for ventilation. Do not cover or block
these vents and openings since
insufficient ventilation can cause
overheating and/or shorten the life
of the product. Do not place the
product on a bed, sofa, rug or other
similar surface, since they can block
ventilation openings. This product is
not designed for built-in installation;
do not place the product in an
enclosed place such as a bookcase
or rack, unless proper ventilation
is provided or the manufacturer's
instructions are followed.
• The LCD panel used in this product
is made of glass. Therefore, it can
break when the product is struck
forcefully or with a sharp object. If
the LCD panel is broken, be careful
not to be injured by broken glass.
• Heat sources — Keep the product
away from heat sources such as
radiators, heaters, stoves and other
heat-generating products (including
amplifiers).
• To prevent fire, never place any type
of candle or naked flames on the
top or near the TV set.
• To prevent fire or shock hazard, do
not place the AC power cord under
the TV set or other heavy items.
• Do not place heavy objects on this
product or stand on it. Doing so
could cause injury if the product
overturns. Take special care near
children and pets.
The LCD panel is a very high technology product
with 1,049,088 pixels, giving you fine picture details.
Due to the very large number of pixels, occasionally
a few non-active pixels may appear on the screen
as a fixed point of blue, green or red.
This is within product specifications and does not
constitute a fault.
• Do not display a still picture for a long time, as this could
cause an afterimage to remain.
• Install the product on the place where the AC cord can
be unplugged easily from the AC outlet, or from the AC
INPUT terminal on the rear of the product.
3
19A35X_en_b.indd 3
4/14/2008 5:28:22 PM
Supplied accessories
Make sure the following accessories are provided with the product.
Remote control unit
Used with batteries inserted.
Page 8
“AA” size battery (g2)
AC cord
Page 12
Always use the AC cord supplied with
the TV.
Page 9
Cable clamp
Stand unit
Stand
Screws (g3)
Hex key
For bundling cables.
Page 9
Page 5
Operation manual
Trademarks
• “HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC.”
4
19A35X_en_b.indd 4
2008-2-29 10:07:01
Preparation
Attaching the stand
• Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being
damaged.
CAUTION
• Attach the stand in the correct direction.
• Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
1
Confirm the 3 screws supplied with the TV.
Screws (g3)
(used in step 2)
2
1 Insert the stand into the openings on the bottom of the TV.
2 Insert and tighten the 3 screws into the 3 holes on the rear of the stand.
Soft cushion
Screw
Hex key
NOTE
• To detach the stand, perform the steps in reverse order.
CAUTION
• Adjust the screen with both hands. Put one hand on
the TV and tilt the screen while steadying the stand
with your other hand.
To change the vertical angle of the TV, tilt the screen up to
2.5 degrees forward or 10 degrees backward.
5
19A35X_en_b.indd 5
2008-2-29 10:07:01
Preparation
Part names
TV (Front/Side)
POWER (On/Off) button
MENU button
TV/VIDEO button
Channel up (r)/down (s) buttons
Volume up (e)/down (f) buttons
Remote control sensor
OPC sensor
OPC indicator*
POWER indicator**
*OPC: Optical Picture Control (See page 30)
** See page 13 for the TV status indicator.
• The illustrations in this operation manual are for explanation purposes and may vary slightly from the actual operations.
6
19A35X_en_b.indd 6
4/14/2008 5:11:05 PM
Preparation
TV (Rear)
AC INPUT terminal
INPUT 4 (PC INPUT)
terminals
INPUT 3 (HDMI) terminals
Headphone jack
RS-232C terminal
Antenna input terminal
INPUT 2 terminals
INPUT 1 terminals
Regarding the headphone jack
• Use headphones with a stereo mini plug (Ø 3.5 mm).
• Be sure to unplug headphones from the jack when they are not
in use.
• The speakers do not output volume when headphones are
plugged in.
• The “Audio” menu cannot be operated when headphones are
plugged in.
• You can set the volume to different levels for each input source.
Volume display when headphones are plugged in
20
7
19A35X_en_b.indd 7
2008-2-29 10:07:01
Preparation
Remote control unit
7
10
11
12
13
14
1
2
3
8
9
10
11
5
15
16
17
6
18
4
7
12
13
14
15
16
8
19
9
17
18
20
19
20
1
2
3
4
5
6
POWER (STANDBY/ON)
To switch the power on and off. (See page 13.)
DISPLAY
Display the channel or input information.
0–9
Set the channel. (See page 17.)
TELETEXT mode: Set the page. (See pages 43 and 44.)
A (Flashback)
Press to return to the previous selected channel or
external input mode. (See page 22.)
WIDE
Change the wide image mode. (See pages 28 and 38.)
FREEZE
Freeze a motion picture on the screen. (See page 22.)
a/b/c/d (Cursor)
Select a desired item on the setting screen.
ENTER
Execute a command.
EXIT
Return to the default screen.
Colour (Red/Green/Yellow/Blue)
TELETEXT mode: Select a page. (See page 43.)
AV MODE
Select an audio and video setting: AV MODE (STANDARD,
MOVIE, GAME, USER, DYNAMIC, DYNAMIC (FIXED)), PC
MODE (STANDARD, USER, PC). (See page 29.)
SLEEP
Set the Sleep timer. (See page 25.)
e (Mute)
Mute the sound. (See page 22.)
MPX
Select the sound multiplex mode. (See page 23.)
VOLk/VOLl
Set the volume. (See page 17.)
CHr/CHs
TV input mode: Select the channel. (See page 17.)
TELETEXT mode: Select the page. (See page 43.)
TV/VIDEO (INPUT SOURCE)
Select an input source. (TV, INPUT 1, INPUT 2, INPUT 3,
INPUT 4 (PC)) (See pages 10, 35 and 37.)
PC
Directly select the PC terminal. (See pages 35 and 37.)
MENU
Display the menu screen. (See page 14.)
RETURN
MENU mode: Return to the previous menu screen. (See
page 14.)
m (TELETEXT)
Select the TELETEXT mode. (all TV image, all TEXT image,
TV/TEXT image) (See pages 43 and 44.)
k (Reveal hidden for TELETEXT)
TELETEXT mode: Display hidden characters. (See page
43.)
[ (SUBTITLE for TELETEXT)
To turn the subtitles on and off. (See page 44.)
3 (Hold)
TELETEXT mode: Stop updating Teletext pages
automatically. Press 3 again to release the hold mode.
(See pages 43 and 44.)
1 (Subpage)
Display the Teletext subpage directly. (See page 44.)
v (Top/Bottom/Full)
TELETEXT mode: Set the area of magnification. (See
page 43.)
8
19A35X_en_b.indd 8
2008-2-29 10:07:01
Preparation
Before turning on the power
Notes on installing the TV
• Avoid direct sunlight and place the TV in a well-ventilated location.
• Place the TV in a level location.
• Do not turn on the power of the TV before connecting the AC cord.
1
Connecting the antenna cable
To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of
connections that are used for coaxial cable.
Standard DIN45325 plug (IEC169-2)
75-ohm coaxial cable (round cable)
Antenna cable
(commercially available)
Room antenna terminal
(75-ohm type)
To antenna
terminal
2
Connecting external devices
See pages 10 to 11 for connecting external equipment, such as a VCR and DVD player.
3
Connecting the AC cord
TV (rear view)
AC outlet
AC cord
• Place the TV close to the AC outlet, and keep the power plug within reach.
• Disconnect the AC cord from the AC outlet if the TV will not be used for a long period of time.
4
Bundling the cables
Insert the cable clamp in the hole on the TV as shown.
Cable clamp
CAUTION
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE
AC CORD CONNECTED.
9
19A35X_en_b.indd 9
4/14/2008 5:11:06 PM
Preparation
Connecting external devices
You can connect many types of external equipment to your TV, like a VCR, game console, camcorder, DVD
player, Digital TV STB (Set Top Box) and PC. To view external source images, select the input source from TV/
VIDEO on the remote control unit or TV/VIDEO on the TV.
CAUTION
• To protect all equipment, always turn off the TV before connecting to a VCR, game console, camcorder, DVD player, Digital
TV STB (Set Top Box), PC or other external equipment.
• Refer to the relevant operation manual (VCR, DVD player, etc.) carefully before making connections.
Connecting a VCR, game console or camcorder
A VCR, game console, camcorder and some other audiovisual equipment can be conveniently connected using
the INPUT 1 (component)/INPUT 2 terminals.
When using component cable
(commercially available)
When using composite cable or S-VIDEO
cable (commercially available)
Y
PB
(CB)
PR
(CR)
S-VIDEO
or
VIDEO
L
L
AUDIO
AUDIO
R
R
VCR/
Game console/
Camcorder
VCR/
Game console/
Camcorder
Connecting a DVD player
You can use the INPUT 1 (component) or INPUT 3 (HDMI) terminal when connecting to a DVD player and other
audiovisual equipment.
NOTE
• When using a DVI-HDMI conversion adaptor, input the Audio Signal from the AUDIO terminal of INPUT 3. (See page 34)
When using HDMI cable
(commercially available)
When using component cable
(commercially available)
Y
PB
(CB)
PR
(CR)
DVD player
L
AUDIO
R
DVD player
10
19A35X_en_b.indd 10
2008-2-29 10:07:02
Preparation
Connecting a Digital TV STB (Set Top Box)
You can use the INPUT 1 (component) or INPUT 3 (HDMI) terminal when connecting to a Digital TV STB (Set Top
Box) and other audiovisual equipment.
NOTE
• When using a DVI-HDMI conversion adaptor, input the Audio Signal from the AUDIO terminal of INPUT 3. (See page 34)
When using HDMI cable
(commercially available)
When using component cable
(commercially available)
Y
PB
(CB)
PR
(CR)
L
Digital TV STB
(Set Top Box)
AUDIO
R
Digital TV STB
(Set Top Box)
Connecting a PC
You can use the INPUT 4 (PC) terminal when connecting to a PC.
AUDIO
(L/R)
ANALOG
RGB
PC
11
19A35X_en_b.indd 11
2008-2-29 10:07:02
Preparation
Inserting the batteries
Before using the TV for the first time, insert two “AA” size batteries (supplied). When the batteries become
depleted and the remote control fails to operate, replace the batteries with new “AA” size batteries.
1 Open the battery cover.
2 Insert the two supplied “AA” size
batteries.
3 Close the battery cover.
• Place batteries with their terminals
corresponding to the (e) and (f)
indications in the battery compartment.
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
• Do not mix batteries of different types. Different types of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical
leakage in old batteries.
• Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you find any
chemical leakage, wipe thoroughly with a cloth.
• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
• If you will not be using the remote control unit for an extended period of time, remove the batteries from it.
Using the remote control unit
Use the remote control unit by pointing it towards the
remote sensor window.
Objects between the remote control unit and sensor
window may prevent proper operation.
30º
30º
Remote control
sensor
30º
5m
30º
Cautions regarding the remote control unit
• Do not subject the remote control unit to shock.
In addition, do not soak the remote control unit with liquids or place it in
an area with high humidity.
• Do not install or place the remote control unit under direct sunlight.
The heat may cause deformation of the unit.
• The remote control unit may not work properly if the remote sensor
window of the TV is under direct sunlight or strong lighting. In such
cases, change the angle of the lighting or TV, or operate the remote
control unit closer to the remote sensor window.
12
19A35X_en_b.indd 12
2008-2-29 10:07:02
Preparation
Turning the TV on/off
Turning on the power
Turning off the power
Press POWER on the TV.
• POWER indicator (Green): The TV is on. (After a few
seconds, an image appears with sound.)
• After turning the power “ON” by pressing POWER on the
TV, you can turn the power ON/OFF by pressing POWER
on the remote control.
POWER button
POWER button
Press POWER on the remote control.
• The TV enters standby mode and the image on the screen
disappears.
• The POWER indicator on the TV changes from green to
red.
Press POWER on the TV.
• The POWER indicator on the TV turns off.
• When the TV is turned off by POWER on the TV, you
cannot turn on the power by pressing POWER on the
remote control.
POWER indicator
POWER indicator
Light off
Power off
Lighted (Red)
The TV is in standby mode.
Lighted (Green)
The TV is on.
NOTE
• If you are not going to use this TV for a long period of time,
be sure to remove the AC cord from the AC outlet.
• Minor power is consumed when the unit is in standby mode.
13
19A35X_en_c.indd 13
2008-2-29 10:07:47
Preparation
About Menu operations
w Using the control panel of the TV
What is Menu?
• You need to bring up the On-Screen Display to perform
settings for the TV. The On-Screen Display for the settings
is called “Menu”.
• The Menu enables various settings and adjustments. (See
page 15.)
• The Menu can be operated with the remote control unit.
You can also operate the Menu using the control panel
of the TV.
Button operations on the control panel correspond to
the ones on the remote control as shown below.
Basic Menu operations
1
Press MENU and the MENU screen displays.
MENU
[Picture]
Picture
Audio
Power Control
Setup
STANDARD
OPC
[Off]
Backlight
[+16]
Contrast
[ 30]
+
Brightness [
0]
+
Colour
[
0]
+
Tint
[
0]
Sharpness [
0]
TV control panel buttons
Remote control buttons
TV/VIDEO
ENTER
CH r
a
CH s
b
VOL k
d
VOL l
c
+
Advanced
Reset
2
Press c/d to select the desired menu, and
then press ENTER.
Audio
Power Control
STANDARD
Treble
[ 0]
-
+
Bass
[ 0]
-
+
Balance
[ 0]
L
R
Sound Wide
Reset
3
Press a/b to select the desired menu item.
Press ENTER to proceed if necessary.
Audio
NOTE
• Menu options differ in the selected input modes, but the
operating procedures are the same.
• The screens in the operation manual are for explanation
purposes (some are enlarged, others cropped) and may
vary slightly from the actual screens.
About Guide Display
The Guide Display at the bottom of the screen shows
operations with an On-Screen Display.
Power Control
STANDARD
Treble
[ 0]
-
+
Bass
[ 0]
-
+
Balance
[ 0]
L
R
: Select
ENTER
: Enter
RETURN
: Back
MENU
: End
Sound Wide
Reset
4
Press a/b or c/d to select the desired item
or adjust the item to the desired level. Press
ENTER if necessary.
5
Press EXIT or MENU to exit the MENU.
Press RETURN as necessary to return to the
previous MENUs.
The bar above is an operational guide for
the remote control. The bar will change in
accordance with each menu setting screen.
14
19A35X_en_c.indd 14
2008-2-29 10:07:49
Preparation
TV/AV input mode menu items
List of TV/AV menu items to help you with
operations
Picture
AV Mode ..................................................................... Page 29
OPC ............................................................................. Page 30
Backlight .................................................................... Page 30
Contrast ...................................................................... Page 30
Brightness .................................................................. Page 30
Colour ......................................................................... Page 30
Tint .............................................................................. Page 30
Sharpness .................................................................. Page 30
Advanced
C. M. S. ............................................................ Page 31
Colour Temp. .................................................. Page 31
Film Mode ....................................................... Page 31
3D-Y/C ............................................................ Page 31
Monochrome .................................................. Page 31
I/P Setting ....................................................... Page 31
Reset ........................................................................... Page 30
Audio
AV Mode ..................................................................... Page 29
Treble .......................................................................... Page 33
Bass ............................................................................ Page 33
Balance ....................................................................... Page 33
Sound Wide ................................................................ Page 33
Reset ........................................................................... Page 33
PC input mode menu items
List of PC menu items to help you with operations
Picture
AV Mode ..................................................................... Page 29
OPC ............................................................................. Page 30
Backlight .................................................................... Page 30
Contrast ...................................................................... Page 30
Brightness .................................................................. Page 30
Advanced
C. M. S. ............................................................ Page 31
Colour Temp. .................................................. Page 31
Reset ........................................................................... Page 30
Audio
AV Mode ..................................................................... Page 29
Treble .......................................................................... Page 33
Bass ............................................................................ Page 33
Balance ....................................................................... Page 33
Sound Wide ................................................................ Page 33
Reset ........................................................................... Page 33
Power Control
No Operation Off ....................................................... Page 25
Power Management .................................................. Page 26
Power Control
Setup
No Signal Off .............................................................. Page 25
No Operation Off ....................................................... Page 25
Setup
Auto Installation ......................................................... Page 16
Programme Setup .............................................. Pages 18-21
Child Lock .................................................................. Page 24
Input Label ................................................................. Page 35
Position ....................................................................... Page 32
HDMI Audio Select .................................................... Page 34
HDMI Auto View ......................................................... Page 34
WSS ............................................................................ Page 27
4:3 Mode ..................................................................... Page 27
Rotate ......................................................................... Page 32
Language .................................................................... Page 17
Text Language ........................................................... Page 45
Reset ........................................................................... Page 47
Option
Input Label ................................................................. Page 35
PC Setup
Input Signal ..................................................... Page 40
Auto Sync. ...................................................... Page 39
Fine Sync. ....................................................... Page 39
Rotate ......................................................................... Page 32
Language .................................................................... Page 17
Text Language ........................................................... Page 45
Reset ........................................................................... Page 47
Option
Audio Only .................................................................. Page 22
NOTE
• Some menu items may not be displayed depending on the
selected input source.
• “AV Mode” settings cannot be operated on the “Menu”
screen.
DNR ............................................................................. Page 32
Audio Only .................................................................. Page 22
Colour System ........................................................... Page 36
15
19A35X_en_c.indd 15
2008-2-29 10:07:49
Watching TV
Setting channels automatically
You can run auto installation again, even after setting
up the preset channels.
4
If you have already set the password, enter it
here.
• See page 24 for setting a password.
5
6
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Setup”.
3
Press a/b to select “Auto Installation”, and
then press ENTER.
MENU
Press a/b to select “Yes”, and then press
ENTER.
Press a/b to select the desired language
listed on the screen, and then press ENTER.
Press a/b to select the desired sound
system, and then press ENTER.
You do not need to do anything during the
auto search.
“Search is completed.” is displayed. Press
MENU to exit.
[Setup ... Auto Installation]
Setup
Option
Auto Installation
Programme Setup
Child Lock
Input Label
Position
PC Setup
HDMI Audio Select
HDMI Auto View
WSS
4:3 Mode
Rotate
Language
Text Language
Reset
16
19A35X_en_c.indd 16
2008-2-29 10:07:49
Watching TV
Selecting programmes
Adjusting the volume
You can change channels in several ways.
Using CHr/s on the remote control unit
• Press CHr to increase the channel number.
• Press CHs to decrease the channel number.
NOTE
• CHr/s on the TV operates the same as CHr/s on
the remote control unit.
Changing the volume
You can change the volume on the TV or on the
remote control unit.
• To increase the volume, press VOLk.
• To decrease the volume, press VOLl.
20
Using 0 — 9 on the remote control unit
Select the channels directly by pressing buttons 0 to 9.
NOTE
• “TV”, “INPUT1”, “INPUT2”, “INPUT3” and “INPUT4” (PC)
modes can store volume adjustment values separately.
Menu language settings
You can also select a language from setup menu.
Select from among 3 languages: English, Chinese and
Arabic.
a
To select a 1-digit channel (e.g. channel 2):
• Press 0, followed by 2.
To select a 2-digit channel (e.g. channel 12):
• Press 1, followed by 2.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Setup”.
When viewing Teletext information
View a page directly which is 3-digit page number from
100 to 899 by pressing buttons 0 to 9.
3
Press a/b to select “Language”, and then
press ENTER.
4
Press a/b to select the desired language
listed on the screen, and then press ENTER.
Channel display
(Example)
PAL
SAT.1
12
B/G
MONO
17
19A35X_en_c.indd 17
2008-2-29 10:07:49
Watching TV
Setting channels to your preference
You can run the auto search procedure again at any
time by accessing the Setup menu and Programme
Setup. Channels can be tuned automatically or
manually.
Auto search
Manual setting for each channel
You can also automatically search by performing
the procedure below. This is the same function as
programme auto search in auto installation.
1
2
3
You can set some channel items manually. They are
Search, Fine (TV frequency), Colour System, Sound
System and Skip.
Press MENU and the MENU screen displays.
1
Press c/d to select “Setup”.
2
Press a/b to select “Programme Setup”, and
then press ENTER.
If you have already set the password, enter it
here.
3
[Setup ... Programme Setup]
Setup
Press c/d to select “Setup”.
Press a/b to select “Programme Setup”, and
then press ENTER.
If you have already set the password, enter it
here.
• See page 24 for setting a password.
• See page 24 for setting a password.
MENU
Press MENU and the MENU screen displays.
4
Press a/b to select “Manual Adjust”, and
then press ENTER.
5
Press a/b to select “Yes”, and then press
ENTER.
Option
Auto Installation
Programme Setup
Child Lock
Programme Setup “Manual Adjust” menu
Input Label
Position
PC Setup
01 SAT.1
02 PR07
03 KABEL
HDMI Audio Select
HDMI Auto View
WSS
4:3 Mode
Rotate
Language
You can select one of the following settings.
Text Language
Reset
4
Press a/b to select “Auto Search”, and then
press ENTER.
5
Press a/b to select “Yes”, and then press
ENTER.
Press a/b to select the desired sound
system, and then press ENTER.
“Search is completed.” is displayed. Press
MENU to exit.
1
2
3
4
5
Search (See page 19.)
Fine (See page 19.)
Colour system (See page 19.)
Sound system (See page 19.)
Skip (See page 20.)
18
19A35X_en_c.indd 18
2008-2-29 10:07:49
Watching TV
Manual setting for each channel (continued)
Search tuning
1
Colour system
Press a/b/c/d to select the channel you
want to edit, and then press ENTER.
1
• The selected channel information displays.
2
Press a/b to select “Search”, and then press
ENTER.
MENU
Press a/b/c/d to select the channel you
want to edit, and then press ENTER.
• The selected channel information displays.
2
Press a/b to select “Colour System” and
then press ENTER.
• Receivable colour systems are listed.
[Setup ... Programme Setup]
Colour system menu
Search
Fine
179.25
Search
MHz
AUTO
Fine
Colour System
PAL
NEXT
Sound System
Colour System
Skip
Sound System
SECAM
NTSC 3.58
Skip
NTSC 4.43
PAL-60
3
As ENTER is pressed, the next channels will
be searched in order.
3
Press a/b to select the optimum colour
system, and then press ENTER.
Fine tuning
1
Press a/b/c/d to select the channel you
want to edit, and then press ENTER.
• The selected channel information displays.
2
3
Press a/b to select “Fine”, and then press
ENTER.
Sound system (Broadcasting system)
1
Press a/b/c/d to select the channel you
want to edit, and then press ENTER.
• The selected channel information displays.
2
Press c/d to adjust the frequency, and then
press RETURN or MENU.
Press a/b to select “Sound System”, and
then press ENTER.
• Receivable sound systems (Broadcasting systems)
are listed.
• Adjust while checking the background picture as
a reference.
Sound system menu
Search
Search
Fine
179.25
MHz
Colour System
Fine
B/G
Colour System
D/K
Sound System
Sound System
Skip
I
M
Skip
• Instead of the method above, you can also set
by directly entering the frequency number of the
channel with 0 — 9.
• When setting a frequency on the “Fine” screen,
the last figure of the frequency needs to be “0” or
“5”.
a
• 179.25 MHz: Press 1 s 7 s 9 s 2 s 5.
• 49.25 MHz: Press 0 s 4 s 9 s 2 s 5.
3
Press a/b to select the optimum sound
system, and then press ENTER.
NOTE
• Check the sound system if the sound output were not
correct.
19
19A35X_en_c.indd 19
2008-2-29 10:07:50
Watching TV
Manual setting for each channel (continued)
Skipping channels
Channels with “Skip” set to “On” are passed over
when using CHr/s even if selected while watching
the image from the TV.
1
Press a/b/c/d to select the channel you
want to edit, and then press ENTER.
• The selected channel information will be displayed.
2
Press a/b to select “Skip”, and then press
ENTER.
Sorting programmes
Channel positions can be sorted freely.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Setup”.
3
Press a/b to select “Programme Setup”, and
then press ENTER.
If you already set the password, enter it here.
• See page 24 for setting a password.
• Skip menu displays.
Skip menu
MENU
[Setup ... Programme Setup]
Search
Fine
Off
4
Press a/b to select “Sort”, and then press
ENTER.
5
Press a/b to select “Yes”, and then press
ENTER.
6
Press a/b/c/d to select the channel you
want to move, and then press ENTER.
7
Move it to the desired position by pressing
a/b/c/d, and then press ENTER.
8
Repeat the steps 6 and 7 until all desired
channels are sorted.
Colour System
Sound System
On
Skip
3
Press a/b to set “Skip” to “On”, and then
press ENTER.
Sort menus
01 SAT.1
01 SAT.1
02 KABEL
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
01 SAT.1
02 KABEL
01 SAT.1
02 KABEL
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
01 KABEL
01 KABEL
02 SAT.1
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
20
19A35X_en_c.indd 20
2008-2-29 10:07:50
Watching TV
Erasing programmes
Labelling programmes
The individual programme can be erased.
Channels can be labelled freely.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Setup”.
3
Press a/b to select “Programme Setup”, and
then press ENTER.
If you already set the password, enter it here.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Setup”.
3
Press a/b to select “Programme Setup”, and
then press ENTER.
If you already set the password, enter it here.
• See page 24 for setting a password.
4
Press a/b to select “Erase Programme”, and
then press ENTER.
5
Press a/b to select “Yes”, and then press
ENTER.
• See page 24 for setting a password.
4
Press a/b to select “Label”, and then press
ENTER.
MENU
[Setup ... Programme Setup]
Auto Search
Manual Adjust
6
Press a/b/c/d to select the channel you
want to erase, and then press ENTER.
Yes
Sort
Label
No
Erase Programme
7
Press ENTER again to erase the channel.
All the subsequent programmes move up.
8
Repeat the steps 6 and 7 until all desired
channels are erased.
Erase programme menus
01 SAT.1
02 Pro7
03 KABEL
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
01 SAT.1
02 Pro7
03 KABEL
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
01 SAT.1
02 KABEL
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
5
Press a/b to select “Yes”, and then press
ENTER.
6
Press a/b/c/d to select the channel you
want to label, and then press ENTER.
7
Press a/b to select characters and c/d
to move to the desired digit, and then press
ENTER to complete the label setting.
21
19A35X_en_c.indd 21
2008-2-29 10:07:50
Watching TV
Useful viewing functions
Returning to the previously selected
channel
Muting the audio temporarily
Using Mute (e) on the remote control unit
e mutes the current sound output.
1
Press e.
2
Press e again within 30 minutes to cancel the
mute.
Press A to switch the currently tuned channel to the
previously tuned channel.
Press A again to switch back to the currently tuned
channel.
Press A to toggle between the currently selected
input source and the previously selected one.
• Before 30 minutes, the volume level returns to the
previous setting.
Press A to return to the previous page in TELETEXT
mode.
Freezing the image
Allows you to capture and freeze one frame from a
moving image that you are watching.
• The sound is silenced.
• “M” is displayed while the mute function is on.
Mute
NOTE
• Mute will be cancelled after 30 minutes. However,
the TV will not suddenly output loud sound as the
volume level will be set to 0 automatically. Increase
the volume level by pressing VOLk.
Outputting only audio
When listening to music from a music programme, you
can set the display off and enjoy audio only.
1
Press FREEZE.
2
Press RETURN to cancel the function.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Option”.
3
Press a/b to select “Audio Only”, and then
press ENTER.
4
Press a/b to select “On”, and then press
ENTER.
• Captures one frame from a moving image.
NOTE
• The still image automatically goes out after 30 minutes.
Selected item
Description
On
Audio is output without screen image.
Off
Both screen images and audio are output.
NOTE
• When you make operations that change the picture on the
TV such as by changing the input source, the Audio Only
function is set to “Off”.
22
19A35X_en_d.indd 22
2008-2-29 10:08:18
Watching TV
Switching the analogue audio format
You can switch between multiple audio modes
when watching a multiple audio or stereo broadcast
programme.
In the TV mode of A2 TV broadcasts
When receiving a stereo signal
Each time you press MPX, the mode switches
between STEREO and MONO.
Stereo mode
BBC2
99
PAL
BBC2
99
B/G
STEREO
PAL
B/G
MONO
When receiving a bilingual signal
Each time you press MPX, the mode switches among
CH A, CH B and CH AB.
Bilingual mode
In the NICAM TV broadcasts
When receiving a stereo signal
Each time you press MPX, the mode switches
between NICAM STEREO and MONO.
BBC2
99
PAL
BBC2
99
B/G
CH A
PAL
Stereo mode
BBC2
99
BBC2
99
PAL
NICAM
B/G
STEREO
PAL
B/G
MONO
B/G
CH B
BBC2
99
PAL
B/G
CH AB
When receiving a monaural signal
When you press MPX, “MONO” displays.
When receiving a bilingual signal
Each time you press MPX, the mode switches among
NICAM CH A, NICAM CH B, NICAM CH AB and
MONO.
B/G
CH A
BBC2
99
PAL
NICAM
BBC2
99
PAL
B/G
MONO
BBC2
99
MONO
Bilingual mode
BBC2
99
PAL
NICAM
Monaural mode
B/G
CH B
NOTE
• “BBC2” and “99” are tentative network name and channel.
BBC2
99
PAL
NICAM
B/G
CH AB
When receiving a monaural signal
Each time you press MPX, the mode switches
between NICAM MONO and MONO.
Monaural mode
BBC2
99
PAL
NICAM
B/G
MONO
BBC2
99
PAL
B/G
MONO
23
19A35X_en_d.indd 23
2008-2-29 10:08:19
Watching TV
Password setting for the child lock
(For TV input mode)
Allows you to use a password to protect certain
settings from being accidentally changed.
Setting a channel
1
Repeat steps 1 to 4 in Setting a password.
2
Press a/b to select “Channel Setting”, and
then press ENTER.
3
Press a/b to select “Yes”, and then press
ENTER.
Change Password
Setting a password
Register a 4-digit password number to use the Child
Lock function.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Setup”.
3
Press a/b to select “Child Lock”, and then
press ENTER.
4
If you already set the password, enter it here.
5
Press a/b to select “Change Password”, and
then press ENTER.
Change Password
Channel Setting
No
Press a/b/c/d to select the channel that
you wish to apply the Child Lock, and then
press ENTER.
Resetting the password
Allows you to reset your password.
1
Repeat steps 1 to 4 in Setting a password.
2
Press a/b to select “Reset”, and then press
ENTER.
3
Press a/b to select “Yes”, and then press
ENTER.
Change Password
Reconfirm
Channel Setting
Yes
Reset
No
Enter the 4-digit number as a password using
0 — 9.
Change Password
Channel Setting
New Password
Reset
Reconfirm
7
Yes
Reset
New Password
Reset
6
4
Channel Setting
NOTE
• As a precautionary measure, make a note of your
password on the back of this operation manual, cut
it out and keep it in a safe place that children cannot
reach.
• This function is only available for TV input mode.
• To relock a channel which has been temporarily unlocked
by inputting the correct password, turn power off and then
on again.
Enter the same 4-digit number as in step 6 to
confirm.
NOTE
• To view a locked channel you must enter a password.
When you select a locked channel, a password prompt
message pops up.
24
19A35X_en_d.indd 24
2008-2-29 10:08:19
Watching TV
Energy conservation settings
Auto power-off at a designated time
This function is conveniently used when, for instance,
going to bed while watching TV.
Auto power-off after the end of broadcast
You can set the TV to automatically power off in about
15 minutes after the TV goes into a state of receiving
no programme signals, such as the end of a broadcast
day.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Power Control”, and
then press ENTER.
• Power control menu displays.
1
Press SLEEP.
• Remaining time displays when sleep timer has
been set.
3
Press a/b to select “No Signal Off”, and then
press ENTER.
4
Press a/b to select “Enable”, and then press
ENTER.
Sleep timer: Remain 2 hr. 00 min.
2
Each time you press SLEEP, the remaining
time switches as shown below.
0 hr. 30 min.
Off
1 hr. 00 min.
2 hr. 30 min.
1 hr. 30 min.
2 hr. 00 min.
NOTE
• When the time has been set, countdown automatically
starts.
• Five minutes before the preset of time expires, the
remaining time displays each minute.
• Select “Off” by pressing SLEEP to cancel the sleep timer.
• Five minutes before the power shuts down, the
remaining time displays every minute.
NOTE
• “Disable” is the factory preset value.
• When a TV programme finishes, and the TV receives signal
input, this function may not operate.
Auto power-off when there are no
operations performed
You can set the TV to automatically power off when no
TV operation is performed for more than 30 minutes or
3 hours.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Power Control”, and
then press ENTER.
• Power control menu displays.
3
Press a/b to select “No Operation Off”, and
then press ENTER.
4
Press a/b to select “30 min” or “3 hour”, and
then press ENTER.
• Five minutes before the power shuts down, the
remaining time displays every minute.
NOTE
• “Disable” is the factory preset value.
25
19A35X_en_d.indd 25
4/14/2008 5:11:53 PM
Watching TV
Power Management
You can set the TV to automatically power off when no
image is displayed on PC.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Power Control”, and
then press ENTER.
• Power control menu displays.
3
Press a/b to select “Power Management”,
and then press ENTER.
4
Press a/b to select “Mode1” or “Mode2”,
and then press ENTER.
Off
Mode1
Mode2
Selected item
Description
Off
• No power management
• Factory preset value.
Mode1
• If no signal inputs for approximately 8
minutes, the power shuts down.
• Even if you start using the PC and the
signal inputs again, the TV stays off.
• The TV turns on again by pressing
POWER. (See page 13.)
Mode2
• If no signal inputs for approximately 8
seconds, the power shuts down.
• When you start using the PC and the
signal inputs again, the TV turns on.
• The TV turns on again by pressing
POWER. (See page 13.)
NOTE
• If you turn off the power by disconnecting AC cord when
setting “Mode2” in power management, the TV may not
function properly after turning the power on again. In such
case, press POWER on the remote control unit.
• Pressing POWER on the TV will have the same result.
26
19A35X_en_d.indd 26
2008-2-29 10:08:20
Watching TV
Picture size settings
Selecting the Wide Screen Signalling
(WSS) picture size automatically
WSS allows a television to switch automatically among
the different screen formats.
Selecting the Wide Screen Signalling
(WSS) picture size manually
The WSS signal has 4:3 auto-switching that allows you
to select between Panorama and Normal.
1
Press MENU and the MENU screen displays.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Setup”.
2
Press c/d to select “Setup”.
3
Press a/b to select “WSS”, and then press
ENTER.
3
Press a/b to select “4:3 Mode”, and then
press ENTER.
4
Press a/b to select “On” or “Off”, and then
press ENTER.
4
Press a/b to select “Panorama” or “Normal”,
and then press ENTER.
NOTE
• Try to set WIDE mode if an image does not switch to the
correct screen format. When the broadcast signal contains
no WSS information, the function will not work even if
enabled.
WSS signal 4:3 screen
4:3 mode “Panorama”
Selected item
4:3 mode “Normal”
Description
Panorama
Wide image without side bars
Normal
Normal range keeping 4:3 or 16:9 aspect
ratio
27
19A35X_en_d.indd 27
2008-2-29 10:08:20
Watching TV
Selecting the picture size manually
Manual Selection
You can select different picture sizes that account for
the kind of each picture.
Auto Selection
If you set “WSS” and “4:3 Mode” in the Setup menu
on page 27, the optimum WIDE mode is automatically
chosen for every broadcast containing the WSS
information.
“WSS” menu
To enable Auto Selection, set “WSS” in the Setup
menu to “On”. (See page 27.)
Press WIDE.
1
• The WIDE MODE menu displays.
• The menu lists the wide mode options selectable
for the type of video signal currently received.
“4:3 Mode” menu
To set the type of the wide screen, select “Panorama”
or “Normal” in the 4:3 Mode menu. (See page 27.)
WIDE MODE
Normal
Zoom 14:9
4:3 Mode set to “Panorama”
Panorama
4:3 Mode set to “Normal”
NOTE
• If the broadcast signal contains no WSS information, Auto
Selection will not function even when the WSS option is
enabled.
Full
Cinema 16:9
Cinema 14:9
Press WIDE or a/b while the WIDE MODE
menu displays on the screen.
2
• As you toggle down the options, each mode is
immediately reflected on the TV.
Selected item
Description
Normal
For 4:3 “standard” pictures. A side bar appears on each side.
Zoom 14:9
For 14:9 letterbox pictures. A thin side bar appears on each side, and you may also see bars on the top and
bottom with some programmes.
Panorama
In this mode the picture is progressively stretched toward each side of the screen.
Full
For 16:9 squeeze pictures.
Cinema 16:9
For 16:9 letterbox pictures. Bars may appear on the top and bottom with some programmes.
Cinema 14:9
For 14:9 letterbox pictures. Bars may appear on the top and bottom with some programmes.
Normal
Zoom 14:9
Panorama
Cinema 14:9
Cinema 16:9
Full
NOTE
• Some picture sizes may not be
displayable depending on the
input signal.
28
19A35X_en_d.indd 28
2008-2-29 10:08:20
Watching TV
Selecting a preset AV MODE
The AV MODE function enables you to select
appropriate settings for audio and video to account for
the system environment which can vary due to factors
like room brightness, type of programme watched or
the type of image input from external equipment.
Using AV MODE on the remote control unit
1
Press AV MODE.
2
Press AV MODE again before the mode
displayed on the screen disappears.
• Present AV MODE displays.
• The mode changes as shown below.
AV input mode
AV Mode: STANDARD
AV Mode: MOVIE
AV Mode: DYNAMIC
AV Mode: GAME
AV Mode: DYNAMIC (FIXED)
AV Mode: USER (TV)
Selected item
Description
STANDARD
For a highly defined image in a normally
bright room
MOVIE
For a movie
GAME
Lowers image brightness for easier
viewing.
USER
Allows the user to customise settings as
desired. You can set the mode for each
input source.
PC
For PC. (Available only when inputting an
RGB signal. The HDMI input (INPUT3) is
compatible with VGA.)
DYNAMIC
For a clear-cut image emphasising high
contrast for sports viewing
DYNAMIC
(FIXED)
Changes the image and sound settings to
the factory preset values. No adjustments
are allowed.
NOTE
• You can select a different AV MODE item for each input
mode. (For example, select STANDARD for TV input and
DYNAMIC for VIDEO input.)
• During PC input mode, only “STANDARD”, “USER” and
“PC” can be selected under the AV mode selection.
HDMI input mode
AV Mode: STANDARD
AV Mode: MOVIE
AV Mode: DYNAMIC
AV Mode: GAME
AV Mode: DYNAMIC (FIXED)
AV Mode: PC
AV Mode: USER (
)
PC input mode
AV Mode: PC
AV Mode: STANDARD
AV Mode: USER (
)
29
19A35X_en_e.indd 29
2008-2-29 10:08:56
Watching TV
Manual picture settings
Picture adjustment
You can adjust the picture to your preference.
Follow the steps to adjust the picture.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Picture”.
MENU
[Picture]
Picture
[+16]
Contrast
[ 30]
+
Brightness [
0]
+
Colour
[
0]
+
Tint
[
0]
Sharpness [
0]
dbutton
Sets whether or not the screen brightness
is automatically adjusted according to
the lighting condition in the room. (OPC
setting: See this page.)
Backlight
The screen dims
The screen
brightens
Contrast
For less contrast
For more contrast
Brightness
For less brightness
For more brightness
Colour
For less colour
intensity
For more colour
intensity
Tint
Skin tones become
purplish
Skin tones become
greenish
Sharpness
For less sharpness
For more sharpness
Advanced
For finer picture adjustments. (See page
31).
Reset
Resets all picture adjustment items to the
factory preset values.
[Off]
Backlight
cbutton
OPC
Audio
STANDARD
OPC
Selected item
w OPC (Optical Picture Control) setting
You can set the TV to automatically adjust the screen
to suitable backlight brightness according to the
lighting conditions.
+
Advanced
Reset
3
Press a/b to select the desired menu item.
Press ENTER to proceed if necessary.
4
Press a/b or c/d to select the desired item
or adjust the item to the desired level. Press
ENTER if necessary.
OPC indicator
Selected item
NOTE
• For resetting all adjustment items to factory preset values,
pressa/b to select “Reset”, press ENTER, press a/b to
select “Yes”, and then press ENTER.
• “Backlight” cannot be adjusted when “OPC” is set to “On”
or “On (Display)”.
• Select “Advanced” and then press ENTER to set “C.M.S”,
“Colour Temp.”, “Film Mode”, “3D-Y/C”, “Monochrome” or
“I/P Setting”. See page 31.
Description
On (Display)
Displays the OPC effect on the screen
while adjusting the brightness of the
screen.
On
Automatically adjusts
Off
The brightness is fixed at the value set in
“Backlight” (See this page).
OPC indicator
Light off
“Off” is selected in the OPC setting.
Lighted (Green) “On” or “On (Display)” is selected in the
OPC setting.
NOTE
• Make sure no object obstructs the OPC sensor, which
could affect its ability to sense surrounding light.
30
19A35X_en_e.indd 30
2008-2-29 10:08:57
Watching TV
Advanced picture settings
The advanced settings enable you to set the picture
adjustment in more detail. There are six options you
can choose from.
Press MENU and the MENU screen displays.
1
w 3D-Y/C
Provides high quality images with minimal dot crawl
and cross colour noise.
Selected item
2
Press c/d to select “Picture”.
3
Press a/b to select “Advanced”, and then
press ENTER.
4
Press a/b to select the desired menu, and
then press ENTER.
5
Press a/b or c/d to select the desired level,
and then press ENTER if necessary.
Description
Standard
Normal adjustment
Fast
For movie image
Slow
For still image
Off
3D-Y/C off
NOTE
• 3D-Y/C is not selectable depending on the input signal
type.
• 3D-Y/C may not operate depending on the input signal
type or noisy input signal.
w C.M.S. (Colour Management System)
w Monochrome
Colour tone is managed using the six-colour
adjustment setting.
For viewing images in monochrome.
Selected item
Description
C.M.S-Hue
This is a standard to adjust the colour
either more reddish or more bluish in tone.
C.M.SSaturation
Increases or decreases the saturation of a
selected colour.
C.M.S-Value
A higher value makes the image brighter.
A lower value makes the image darker.
w I/P Setting
Adjusting the image and input signal can give you a
more beautiful picture.
NOTE
• For resetting all adjustment items to factory preset values,
press a/b to select “Reset”, and then press ENTER.
w Colour Temp. (Colour Temperature)
Adjusts the colour temperature to give the best white
image.
Selected item
High
Mid-High
Middle
Mid-Low
Low
Description
White with bluish tone
White with reddish tone
w Film Mode
Automatically detects a film-based source (originally
encoded at 24/25 frames/second, depending on the
vertical frequency), analyses it then recreates each still
film frame for high-definition picture quality.
31
19A35X_en_e.indd 31
2008-2-29 10:08:57
Watching TV
Other picture settings
DNR (Digital Noise Reduction)
Reduces noise on the screen and provides a clearer
video image.
Rotating the image
You can set the orientation of the picture.
Press MENU and the MENU screen displays.
1
Press MENU and the MENU screen displays.
1
2
Press c/d to select “Option”.
2
Press c/d to select “Setup”.
3
Press a/b to select “DNR”, and then press
ENTER.
3
Press a/b to select “Rotate”, and then press
ENTER.
4
Press a/b to select the desired level, and
then press ENTER.
4
Press a/b to select the desired mode, and
then press ENTER.
Off
Normal
High
Mirror
Low
Upside Down
Rotate
Adjusting the image position
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Setup”.
3
Press a/b to select “Position”, and then
press ENTER.
4
Press a/b to select “H-Position” or “V-Position”.
H-Position [ 0]
+
V-Position
+
[ 0]
Reset
Selected item
[Mirror]: mirror image.
ABC
CBA
[Rotate]: rotated image.
[Upside Down]: upside
down image.
ABC
Description
H-Position
Centres the image by moving it to the left
or right.
V-Position
Centres the image by moving it up or
down.
5
[Normal]: normal image.
ABC
For adjusting a picture's horizontal and vertical position.
Press c/d to adjust the item to your desired
position.
NOTE
• For resetting all adjustment items to the factory preset
values, press a/b to select “Reset”, and then press
ENTER.
• Adjustments are stored separately according to input
source.
• Images may not be displayed properly depending on the
settings and/or signals.
32
19A35X_en_f.indd 32
2008-2-29 10:09:31
Watching TV
Audio adjustment
You can adjust the audio of the selected AV mode.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Audio”.
Audio
Power Control
w Sound Wide
This feature can increase the spread of the sound.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Audio”.
3
Press a/b to select “Sound Wide”, and then
press ENTER.
4
Press a/b to select “On”, and then press
ENTER.
STANDARD
-
+
[ 0]
-
+
[ 0]
L
R
Treble
[ 0]
Bass
Balance
Sound Wide
Reset
Selected item
3
Press a/b to select the desired menu item.
Press ENTER to proceed if necessary.
4
Press a/b or c/d to select the desired item
or adjust the item to the desired level. Press
ENTER if necessary.
Selected item
cbutton
Description
On
Increases the spread of the sound.
Off
Outputs the normal sound.
5
Press MENU to exit.
dbutton
Treble
For weaker treble
For stronger treble
Bass
For weaker bass
For stronger bass
Balance
Decrease audio from
the right speaker
Decrease audio
from the left speaker
NOTE
• For resetting all adjustment items to the factory preset
values, press a/b to select “Reset”, press ENTER, press
a/b to select “Yes”, and then press ENTER.
• The “Audio” menu cannot be operated when headphones
are plugged in.
33
19A35X_en_f.indd 33
2008-2-29 10:09:32
Settings when using external devices
Settings when using HDMI output devices
HDMI terminals can carry audio and visual signals to the TV with an HDMI certified cable. When you want to output
the audio and picture from an HDMI output device on the TV, select “INPUT3” by switching the input source.
Connecting an HDMI output device
HDMI cable
(commercially available)
HDMI output
device
w HDMI (High-Definition Multimedia Interface)
terminal selection
HDMI Setup
items
Selectable
items
Description
To watch an HDMI equipment image, select
“INPUT3” using TV/VIDEO on the remote
control unit or on the TV.
Press MENU and the MENU screen displays.
HDMI
Audio
Select
Digital/
Analogue
Select “Digital” for audio
signal via the HDMI terminal.
Select “Analogue” for audio
signal via the AUDIO jack.
3
Press c/d to select “Setup”.
HDMI
Auto View
Enable/
Disable
4
Press a/b to select “HDMI Audio Select” or
“HDMI Auto View”, and then press ENTER.
Set whether or not to use
WIDE MODE based on
signal recognition, including
an HDMI signal.
1
2
• The HDMI Audio Select and HDMI Auto View can
be selected only when “INPUT3” is selected.
MENU
NOTE
• When connecting a DVI-HDMI conversion adaptor/cable to
the HDMI terminal, the image may not come in clearly.
[Setup ... HDMI Auto View]
Setup
Option
Auto Installation
Programme Setup
Child Lock
Input Label
Position
PC Setup
HDMI Audio Select
HDMI Auto View
WSS
4:3 Mode
Rotate
Language
Text Language
Reset
5
Press a/b to select the desired item, and
then press ENTER.
34
19A35X_en_f.indd 34
2008-2-29 10:09:32
Settings when using external devices
Selecting input source
Can use for selecting the input source.
Labelling input sources
You can assign each input source a label as you prefer.
Using TV/VIDEO on the remote control unit or on
the TV
TV/VIDEO allows you to choose from the available
input sources.
1
Press TV/VIDEO to select the desired input
source.
2
Press MENU and the MENU screen displays.
3
Press c/d to select “Setup”.
4
Press a/b to select “Input Label”, and then
press ENTER.
5
Press a/b to select characters and c/d
to move to the desired digit to label the input
source.
• When you want to change the input label that you
have already assigned to the default name, press
c/d to move to “CLEAR” on the “Input Label”
screen, and then press ENTER.
1
Press TV/VIDEO on the remote control unit or
on the TV.
2
Press TV/VIDEO on the remote control unit or
on the TV to select the input source.
• The image and sound from the selected source
are output on the TV.
• You can also select the input source by pressing
a/b.
Using PC on the remote control unit
PC allows you to directly select the PC.
6
Repeat the above until the name is fully spelt
out, and then press MENU.
• The name can be 6 characters or less.
• When you want to set an input source name of
less than 6 characters, press MENU to exit from
the labelling menu.
TV
INPUT1
INPUT2
DVD
(Example)
NOTE
• You cannot change labels if the input source is TV.
Press PC on the remote control.
• The image and sound from the PC are output on the TV.
35
19A35X_en_f.indd 35
2008-2-29 10:09:33
Settings when using external devices
Colour system settings
You can change the colour system to one that is
compatible with the image on the screen.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Option”.
3
Press a/b to select “Colour System”, and
then press ENTER.
4
Press a/b to select a compatible video signal
system of your equipment, and then press
ENTER.
AUTO
PAL
SECAM
NTSC 3.58
NTSC 4.43
PAL-60
NOTE
• Factory preset value is “AUTO”.
• If “AUTO” is selected, colour system for each channel is
automatically set. If an image does not display clearly,
select another colour system (e.g. PAL, NTSC 4.43).
36
19A35X_en_f.indd 36
2008-2-29 10:09:33
Connecting a PC
Use the PC terminals to connect a PC.
NOTE
• The PC INPUT terminals are DDC1/2B-compatible.
• Refer to page 42 for a list of PC signals compatible with the TV.
Ø 3.5 mm stereo
minijack cable
(commercially available)
AUDIO
(L/R)
RGB cable
(commercially available)
ANALOG
RGB
PC
Signal names for 15-pin mini D-sub connector
Pin No.
5
4
10
15
13
1
6
7
8
9
14
2
3
12
11
Signal name
R
G
B
Not connected
CSYNC
Pin No.
Signal name
GND (Ground)
GND (Ground)
GND (Ground)
+5V
GND (Ground)
Pin No.
Signal name
Not connected
SDA
HD
VD
SCL
NOTE
• Macintosh adaptor may be required for use for some Macintosh computers.
• Pin No. 5 is not used for inputting the signal.
Displaying a PC image on the screen
To view an image from a PC, select “INPUT4” using
PC or TV/VIDEO on the remote control unit or TV/
VIDEO on the TV.
TV
INPUT1
INPUT2
INPUT3
INPUT4
When connecting to a PC, the correct input signal type
is automatically detected. (See page 40.)
NOTE
• Each time TV/VIDEO is pressed, the input source toggles.
37
19A35X_en_f.indd 37
2008-2-29 10:09:33
Connecting a PC
Selecting the picture size
You can select the picture size as illustrated below.
NOTE
• Connect the PC before making adjustments.
• Selectable picture size may vary with input signal type.
Connecting a PC
AUDIO
(L/R)
ANALOG
RGB
PC
1
Press WIDE.
• The WIDE MODE menu displays.
WIDE MODE
Normal
Full
WIDE MODE
or
Full
Dot by Dot
(Example)
2
Press WIDE or a/b to select a desired item
on the menu.
a
Picture size images.
Input Signal
Normal
Keeps the original aspect
ratio in a full screen
display.
Full
An image fully fills the
screen.
Dot by Dot
Detects the resolution of
the signal and displays
an image with the same
number of pixels on the
screen.
38
19A35X_en_f.indd 38
2008-2-29 10:09:33
Connecting a PC
Adjusting the PC image automatically
This function enables the screen to be automatically
adjusted to its best possible condition when the
analogue terminals of the TV and PC are connected
with a commercially available RGB cable, etc.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Setup”.
3
Adjusting the PC image manually
Ordinarily you can easily adjust the picture as
necessary to change image position using Auto Sync.
In some cases, however, manual adjustment is needed
to optimise the image.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Setup”.
Press a/b to select “PC Setup”, and then
press ENTER.
3
Press a/b to select “PC Setup”, and then
press ENTER.
4
Press a/b to select “Auto Sync.”, and then
press ENTER.
4
Press a/b to select “Fine Sync.”, and then
press ENTER.
5
Press a/b to select “Yes”, and then press
ENTER.
5
Press a/b to select “Yes”, and then press
ENTER.
6
Press a/b to select a specific adjustment
item among “H-Position”, “V-Position”, “Clock”
and “Phase”.
• Auto Sync. starts.
MENU
[Setup ... PC Setup]
Input Signal
Auto Sync.
Yes
Fine Sync.
No
NOTE
• Auto Sync. is likely to succeed when an input PC image
has wide vertical stripes (e.g. pattern with high contrast
stripes, or cross-hatched).
It may fail when an input PC image is solid (low contrast).
• Be sure to connect the PC to the TV and switch it on
before starting Auto Sync.
H-Position [ 90]
a
b
V-Position [ 60]
a
b
Clock
[ 90]
a
b
Phase
[ 8]
a
b
Reset
Selected item
Description
H-Position
Centres the image by moving it to the left
or right.
V-Position
Centres the image by moving it up or
down.
Clock
Adjusts when the image flickers with
vertical stripes.
Phase
Adjusts when characters have low
contrast or when the image flickers.
7
Press c/d to adjust the item to your desired
position.
NOTE
• For resetting all adjustment items to the factory preset
values, press a/b to select “Reset”, and then press
ENTER.
• Images may not be displayed properly depending on the
settings and/or input signals.
39
19A35X_en_f.indd 39
2008-3-19 10:45:28
Connecting a PC
Input resolution settings
Selecting the input resolution
• Some input signals may have to be registered manually to
display properly.
• The input signals (resolutions) in the list below are not
distinguishable when received. In such case, you have to
set the correct signal manually. After setting once, it will
display when the same signal (resolution) is input again.
640 x 480 / 60 Hz
848 x 480 / 60 Hz
1024 x 768 / 60 Hz
1280 x 768 / 60 Hz
1360 x 768 / 60 Hz
NOTE
• You can only select the “Input Signal” on the Setup menu
when receiving one of the 5 input signals listed above.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Setup”.
3
Press a/b to select “PC Setup”, and then
press ENTER.
4
Press a/b to select “Input Signal”, and then
press ENTER.
5
Press a/b to select the desired input signal
on the display, and then press ENTER.
1024 x 768
1280 x 768
1360 x 768
(Example)
40
19A35X_en_f.indd 40
2008-2-29 10:09:34
Connecting a PC
PC Control of the TV
• When a programme is set, the TV can be controlled from the PC using the RS-232C terminal.
The input signal (PC/video) can be selected, the volume can be adjusted and various other adjustments and
settings can be made, enabling automatic programmed playing.
• Attach an RS-232C cable cross-type (commercially available) to the Din/D-sub RS-232C for the connections.
NOTE
• This operation system should be used by a person who is accustomed to using PCs.
Communication conditions
Set the RS-232C communications settings on the PC to match the communications conditions of the TV.
The communications settings of the TV are as follows:
Baud rate:
9,600 bps
Data length:
8 bits
Parity bit:
None
Stop bit:
1 bit
Flow control:
None
Communication procedure
Send the control commands from the PC via the RS-232C connector.
The TV operates according to the received command and sends a response message to the PC.
Do not send multiple commands at the same time. Wait until the PC receives the OK response before sending the
next command.
Command format
Eight ASCII codes e CR
C1 C2 C3 C4 P1 P2 P3
Command 4-digits
Parameter 4-digits
P4
Command 4-digits: Command. The text of four characters.
Parameter 4-digits: Parameter 0 — 9, space, ?
Return code
Parameter
Input the parameter values, aligning left, and fill with space(s) for the remainder. (Be sure that four values are input for the
parameter.)
When the input parameter is not correct, “ERR” returns. (Refer to “Response code format”.)
0
0
0
0
a
3
0
1
0
0
0
0
5
9
5
When “?” is input for some commands, the present setting value responds.
?
?
?
?
?
Response code format
Normal response
O
K
Problem response (communication error or incorrect command)
E
Return code (0DH)
R
R
Return code (0DH)
41
19A35X_en_g.indd 41
2008-2-29 14:36:30
Connecting a PC
PC compatibility chart
VESA
Horizontal Vertical
Frequency Frequency Standard
Resolution
VGA
WVGA
SVGA
VESA
Horizontal Vertical
Frequency Frequency Standard
Resolution
1024 g 768
48.4 kHz
60 Hz
✓
1024 g 768
56.5 kHz
70 Hz
✓
✓
1024 g 768
60.0 kHz
75 Hz
✓
✓
1280 g 768
47.8 kHz
60 Hz
✓
1360 g 768
47.7 kHz
60 Hz
✓
640 g 480
31.5 kHz
60 Hz
640 g 480
37.9 kHz
72 Hz
✓
640 g 480
37.5 kHz
75 Hz
640 g 480
43.3 kHz
85 Hz
848 g480
31.0 kHz
60 Hz
✓
800 g 600
35.1 kHz
56 Hz
✓
800 g 600
37.9 kHz
60 Hz
✓
800 g 600
48.1 kHz
72 Hz
✓
800 g 600
46.9 kHz
75 Hz
✓
800 g 600
53.7 kHz
85 Hz
✓
XGA
WXGA
RS-232C commands list
Commands
• Commands not indicated here are not guaranteed to operate.
CONTROL ITEM
COMMAND
CONTROL
CONTENTS
PARAMETER
CONTROL ITEM
COMMAND
CONTROL
CONTENTS
PARAMETER
POWER SETTING
P O W R 0
_
_
_
POWER OFF (STANDBY)
VOLUME
V O L M *
INPUT SELECTION A
I
T G D _
_
_
_
INPUT SWITCHING (TOGGLE)
POSITION
H P O S
* * * _ H-POSITION (AV) (f10—e10)
I
T V D _
_
_
_
TV (CHANNEL FIXED)
H P O S
* * * _ H-POSITION (PC) (0—180)
I
A V D *
_
_
_
INPUT1—4 (1—4)
V P O S
* * * _ V-POSITION (AV) (f20—e20)
V P O S
* * * _ V-POSITION (PC) (0—120)
CHANNEL
AV MODE
SELECTION
* _ _ VOLUME (0—60)
D C C H *
* _ _ TV DIRECT CHANNEL (1—99)
C H U P _
_
_
_
CHANNEL UP
C L C K
* * * _ CLOCK (0—180)
C H D W _
_
_
_
CHANNEL DOWN
P H S E
* * _ _ PHASE (0—15)
A V M D 0
_
_
_
TOGGLE
A V M D 1
_
_
_
A V M D 2
_
_
A V M D 3
_
A V M D 4
WIDE MODE
W I
D E 0
_
_
_
TOGGLE (AV)
STANDARD
W I
D E 1
_
_
_
NORMAL (AV/PC)
_
MOVIE
W I
D E 2
_
_
_
ZOOM 14:9 (AV)
_
_
GAME
W I
D E 3
_
_
_
PANORAMA (AV)
_
_
_
USER
W I
D E 4
_
_
_
FULL (AV/PC)
A V M D 5
_
_
_
DYNAMIC (Fixed)
W I
D E 5
_
_
_
CINEMA 16:9 (AV)
A V M D 6
_
_
_
DYNAMIC
W I
D E 6
_
_
_
CINEMA 14:9 (AV)
A V M D 7
_
_
_
PC
W I
D E 8
_
_
_
DOT BY DOT (PC)
M U T E 0
_
_
_
TOGGLE
M U T E 1
_
_
_
MUTE ON
M U T E 2
_
_
_
MUTE OFF
AUDIO CHANGE
A C H A _
_
_
_
TOGGLE
SLEEP TIMER
O F T M 0
_
_
_
OFF
O F T M 1
_
_
_
SLEEP TIMER 30 MIN
O F T M 2
_
_
_
SLEEP TIMER 1 HOUR
O F T M 3
_
_
_
SLEEP TIMER 1 HOUR 30 MIN
O F T M 4
_
_
_
SLEEP TIMER 2 HOUR
O F T M 5
_
_
_
SLEEP TIMER 2 HOUR 30 MIN
MUTE
NOTE
• If an underbar (_) appears in the parameter column, enter a
space.
• If an asterisk (*) appears, enter a value in the range indicated
in brackets under CONTROL CONTENTS.
42
19A35X_en_g.indd 42
2008-2-29 10:10:09
Teletext function
About Teletext
What is Teletext?
Teletext broadcasts pages of information and
entertainment to specially equipped television sets.
Your TV receives Teletext signals broadcast by a TV
network, and decodes them into graphical format for
viewing. News, weather reports, sports information,
stock exchange prices and programme previews are
among the many services available.
TELETEXT
Teletext mode
Teletext is turned on/off with m on the remote control
unit. You can operate your TV in Teletext mode directly
by inputting commands with the remote control unit.
TELETEXT
When viewing the Teletext information
• Press CHr to increase the page number.
• Press CHs to decrease the page number.
NOTE
• When you turn TELETEXT on and change a Teletext page
right after changing channels, the relevant page may not
be displayed until the TV finishes reading all the Teletext
information.
Button functions
Colour (Red/Green/Yellow/Blue):
You can select a group or block of pages displayed
in the coloured brackets at the bottom of the screen
by pressing the corresponding Colour (Red/Green/
Yellow/Blue) on the remote control unit.
TELETEXT
Turning on and off Teletext
1
Select a TV channel or external input source
providing the Teletext programme.
2
Press m to display the Teletext.
3
Press m again to display the Teletext on
the right screen and normal image on the left
screen.
• Each time you press m, the screen switches as
shown upper right.
• If you select a programme with no Teletext signal,
“No Teletext available.” is displayed.
Red
Green
Yellow
Blue
0 — 9:
Directly select any page from 100 to 899 by using 0 — 9.
v (Top/Bottom/Full):
Each time you press v, the TELETEXT image
switches as shown below.
Full (Displays in full screen)
Top (Displays in the upper half of the screen)
Bottom (Displays in the lower half of the screen)
k (Reveal hidden for TELETEXT):
To reveal hidden information such as an answer to a
quiz, press k.
• Press k again to hide the information.
3 (Hold):
To stop updating Teletext pages automatically, press 3.
• Press 3 again to release the hold mode.
43
19A35X_en_g.indd 43
2008-2-29 10:10:09
Teletext function
Displaying Subtitles
You can display subtitles as they are transmitted.
1
Press [ to display the subtitle.
2
Press [ to exit the subtitle screen.
Displaying Subpages
You can display subpages as they are transmitted.
• Subtitle is updated by information sent by the
broadcasting station.
• To stop updating subtitle automatically, press 3.
NOTE
• Subtitle will not be displayed when the service does not
contain subtitle information.
1
Press m to display Teletext.
2
Press 1 to display the subpage as shown
below.
Subpage screen
+
0002
00
01
02
03
3
Select the desired subpage by using c/d.
4
Press 1 to exit the subpage screen.
• 0 — 9 directly selects the desired subpage.
44
19A35X_en_g.indd 44
2008-2-29 10:10:09
Teletext function
Teletext language setting
If Teletext information does not display correctly,
perform the procedure below.
Select from among 4 kinds of language tables: West
Europe, East Europe, Turkish/Greek, Arabic/Hebrew.
Each table is compatible with the Teletext languages
listed below.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Setup”.
3
Press a/b to select “Text Language”, and
then press ENTER.
4
Press a/b to select receivable teletext
broadcasting language in your country, and
then press ENTER.
MENU
[Setup ... Text Language]
Arabic/Hebrew
West Europe
East Europe
Turkish/Greek
NOTE
• Teletext can display only when it is sent by a network. Not
used to convert between languages.
45
19A35X_en_g.indd 45
2008-2-29 10:10:09
Appendix
Troubleshooting
The problems described below are not always caused by malfunctions. Check the TV again before having the TV
serviced.
Problem
Possible Solution
• No power.
• Check if you pressed POWER on the remote control unit. (See page 13.)
If the indicator on the TV lights up red, press POWER.
• Is the AC cord disconnected? (See page 9.)
• Has the power been turned on? (See page 13.)
• Unit cannot be operated.
• External influences such as lightning, static electricity, etc., may cause improper
operation. In this case, operate the unit after first turning the power off the TV or
unplugging the AC cord and re-plugging it in after 1 or 2 minutes.
• Remote control unit does not
operate.
•
•
•
•
• Picture is cut off.
• Is the image position correct? (See page 32.)
• Are screen mode adjustments such as picture size made correctly? (See pages 27,
28 and 38.)
• Strange colour, light colour, or
dark, or colour misalignment.
•
•
•
•
•
• Power is suddenly turned off.
• The unit's internal temperature has increased.
Remove any objects blocking the vent or clean.
• Check the power control setting. (See pages 25 and 26.)
• Is the sleep timer set? (See page 25.)
• No picture.
• Is the connection to external equipment correct? (See pages 10, 11, 34, 37 and 38.)
• Has the input signal setup been performed correctly after connection? (See page
40.)
• Is the correct input selected? (See page 35.)
• Is the picture adjustment correct? (See pages 30 to 32.)
• Is the antenna connected properly? (See page 9.)
• Is “On” selected in “Audio Only”? (See page 22.)
• No sound.
• Is the volume too low? (See page 17.)
• Make sure that headphones are not connected. (See page 7.)
• The TV sometimes makes a
cracking sound.
• This is not a malfunction. This happens when the cabinet slightly expands and
contracts according to changes in temperature. This does not affect the TV's
performance.
Are batteries inserted with polarity (e, f) aligned? (See page 12.)
Are batteries worn out? (Replace with new batteries.)
Are you using it under strong or fluorescent lighting?
Is a fluorescent light shining on the remote control sensor?
Adjust the picture tone. (See pages 30 to 32.)
Is the room too bright? The picture may look dark in a room that is too bright.
Check the colour system setting. (See pages 19 and 36.)
Check the input signal setting. (See page 40.)
Check the HDMI Auto View setting. (See page 34.)
Cautions regarding use in high and low temperature environments
• When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly delayed.
This is not a malfunction, and the unit will recover when the temperature returns to normal.
• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a
heater, as this may cause the cabinet to deform and the LCD panel to malfunction.
Storage temperature: f20°C to e60°C.
46
19A35X_en_h.indd 46
2008-2-29 10:10:50
Appendix
Reset
If complex adjustments are made and the settings
cannot be restored to normal, you can reset the settings
to the factory preset values.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Setup”.
3
Press a/b to select “Reset”, and then press
ENTER.
4
Press a/b to select “Yes”, and then press
ENTER.
• When “Reset” is completed, the backlight will turn
off and then on in a short period of time.
• The screen will be returned to its original state.
• “Execute auto installation” displays on the screen.
5
Press a/b to select “Yes” and then press
ENTER.
• “Auto installation” will be executed.
NOTE
• If you execute “Reset” , all the settings such as Picture,
Audio, Programme and Language will be reset to the
factory preset values.
47
19A35X_en_h.indd 47
2008-2-29 10:10:52
Appendix
Specifications
Model
LC-19A35X
Item
LCD panel
18.5o (470 mm) Advanced Super View & BLACK TFT LCD
Resolutions
1,049,088 pixels (1366 g 768)
Video Colour System
PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60
TV
Function
PAL: B/G, D/K, I SECAM: B/G, D/K, K/K1 NTSC: M
TV-Standard
Receiving
Channel
VHF/UHF
44.25—863.25 MHz
CATV
S1—S41ch (including Hyperband)
TV-Tuning System
Auto Preset 99 ch
STEREO/BILINGUAL
NICAM: B/G, I, D/K A2 stereo: B/G
Brightness
300 cd/m2
Backlight life
60,000 hours (at Backlight Standard position)
Viewing angles
H : 176º V : 176º
Audio amplifier
2W g 2
Speakers
30 g 75 mm 2pcs
Terminals
Rear
Antenna input
UHF/VHF 75 q DIN type
INPUT 1
COMPONENT in ( 480I, 576I, 480P, 576P, 720P/50Hz, 720P/60Hz, 1080I/50Hz,
1080I/60Hz ), AUDIO in
INPUT 2
VIDEO in, S-VIDEO in, AUDIO in
INPUT 3
HDMI (HDMI input) ( VGA, 480P, 576P, 720P/50Hz, 720P/60Hz, 1080I/50Hz,
1080I/60Hz ), AUDIO in
INPUT4
15 pin mini D-sub, AUDIO in (Ø 3.5 mm jack)
RS-232C
9 pin D-sub male connector
Headphones
Ø 3.5 mm jack (Audio output)
OSD language
English/Chinese/Arabic
Power Requirement
AC 110—240 V, 50/60 Hz
Power Consumption
36 W (0.6 W Standby)
Weight
4.4 kg (without stand), 5.2 kg (with stand)
Operating Temperature
0°C — 40°C
• As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for
product improvement without prior notice. The performance specification figures indicated are nominal values of production
units. There may be some deviations from these values in individual units.
48
19A35X_en_h.indd 48
4/15/2008 2:19:54 PM
Appendix
Dimensional drawings
Unit: mm
462
69
75
40
218
232.4
320
360
411.8
240
196
17.5
100
100
49
19A35X_en_h.indd 49
2008-2-29 10:10:52
Appendix
CLEARING THE PASSWORD
If you forget the password, clear the password using the following procedure.
1
Press MENU and the MENU screen displays.
2
Press c/d to select “Setup”.
3
Press a/b to select “Child Lock”, and then press ENTER.
4
The password input screen displays.
5
Enter “3001” using 0 — 9.
The Child Lock setting menu displays.
The password is now reset.
The Password is
.
NOTE
• As a precautionary measure, make a note of your password above, remove it from this manual, and keep it in a familiar place.
50
19A35X_en_h.indd 50
2008-2-29 10:10:52
Memo
19A35X_en_h.indd 51
2008-2-29 10:10:52
Memo
19A35X_en_h.indd 52
2008-2-29 10:10:52
Cover2_19A35X.indd 2
2008-2-29 10:05:40
Printed in Malaysia
TINS-D696WJZZ
08P06-MA-NP
Cover_19A35X.indd 2
4/14/2008 5:16:18 PM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement