NEC | Express5800/R120d-2M | Configuration Guide | NEC Express5800/R120d-2M Configuration Guide

NEC Express5800/R120d-2M Configuration Guide
NEC Express5800/R120d-2M
Configuration Guide
Introduction
This document contains product and configuration information that will enable you to configure your system. The
guide will ensure fast and proper configuration of your NEC EXPRESS5800 server.
March 2012
Revision 1.0
NEC Corporation
CONFIGURATION GUIDE – NEC Express5800/R120d-2M
Contents
TECHNICAL SPECIFICATION ........................................................................................ 3
Key Features .......................................................................................................................................... 3
Specification .......................................................................................................................................... 3
EXTERNAL VIEWS ......................................................................................................... 8
Front and Rear Views ........................................................................................................................... 8
Dimensions (mm) ................................................................................................................................ 10
CONFIGURATION DIAGRAM ....................................................................................... 11
SERVER CONFIGURATION ......................................................................................... 12
1
2
3
4
5
6
7
8
9
Base Models ................................................................................................................................. 12
Processors and Heat Sink .......................................................................................................... 12
Memory ......................................................................................................................................... 13
3.1
Memory Configuration........................................................................................................ 13
Internal Hard Disk Drives ............................................................................................................ 17
4.1
RAID Configuration ............................................................................................................ 17
4.2
Internal Drive Configuration ............................................................................................... 18
Optical Drive ................................................................................................................................. 25
Internal Tape / RDX Drives .......................................................................................................... 25
6.1
Tape / RDX Drive Selection ............................................................................................... 25
6.2
Tape / RDX Configuration .................................................................................................. 25
PCI Riser Card / PCI Card ........................................................................................................... 26
7.1
PCI Riser Card ................................................................................................................... 26
7.2
Full Length PCI Card installation Kit .................................................................................. 26
7.3
Graphics Card Installation Kit ............................................................................................ 26
7.4
LAN Controller ................................................................................................................... 27
7.5
External Storage Controller ............................................................................................... 29
7.6
Serial Port Adapter ............................................................................................................. 29
Other Add-in Components .......................................................................................................... 30
8.1
Power Supply Module ........................................................................................................ 30
8.2
Redundant Fan Kit ............................................................................................................. 30
8.3
Trusted Platform Module Kit .............................................................................................. 30
8.4
Internal Flash Memory ....................................................................................................... 30
8.5
Flash FDD .......................................................................................................................... 31
8.6
Front Bezel ......................................................................................................................... 31
Add-on Components ................................................................................................................... 31
9.1
17-inch LCD Console Drawer ............................................................................................ 31
9.2
KVM Switch ........................................................................................................................ 31
9.1
Cable Management Arm .................................................................................................... 31
9.2
Server Management License ............................................................................................. 32
9.3
Medium and Cartridge ....................................................................................................... 32
REFERENCES............................................................................................................... 33
Server Management ............................................................................................................................ 33
OS Support Matrix for PCI Cards ...................................................................................................... 34
Supporting PCI Cards and Installable Slots ..................................................................................... 35
Copyright Notice and Liability Disclaimer ........................................................................................ 39
REVISION HISTORY ..................................................................................................... 40
NEC Corporation
Revision 1.0, March 2012
2
CONFIGURATION GUIDE – NEC Express5800/R120d-2M
Technical Specification
Key Features




High performance with the latest Intel® Xeon® processor E5-2600 product family
Up to 768 GB of high speed DDR3-1333 memory
High energy efficiency with power capping feature and 80 PLUS® Platinum power supply
Full manageability by integrated EXPRESSSCOPE Engine 3
Specification
(1 / 2)
Model
Part Number
Processor
R120d-2M
Type
Clock speed
Number of Processors
Cache
Cores and Threads
Chipset
Memory
Type
Standard Capacity
Maximum Capacity
Memory protection
Internal Storage
Standard Capacity
Maximum Capacity
Disk Controller
RAID
Expansion Slots
[free]
NEC Corporation
Hot Plug
Optical Disk Drive
Optical Drive Bays
[free]
3.5-inch Media Bays
[free]
Disk Drive Bays [free]
Standard
N8100-1793F
Intel® Xeon®
Intel® Xeon®
Intel® Xeon®
Intel® Xeon®
processor
processor
processor
processor
E5-2609
E5-2630L
E5-2640
E5-2643
2.40 GHz
2 GHz
2.50 GHz
3.30 GHz
1 to 2
10 MB
15 MB
15 MB
10 MB
4C-4T
6C-12T
6C-12T
8C-16T
Intel® C602-J Chipset
DDR3-1333 ECC Unbuffered Low Power DIMM,
DDR3-1600 ECC Registered Low Power DIMM,
DDR3-1333 ECC Load Reduced DIMM
0 GB
768 GB (24 x 32 GB)
ECC, x4 SDDC, Memory Mirroring, Memory Lockstep, Memory
Sparing
0 GB
SAS HDD : 14.4 TB (16 x 900 GB)
SATA HDD : 16 TB (16 x 1 TB)
SAS SSD : 6.4 TB ( 16 x 400 GB)
SATA SSD : 1.6 TB (16 x 100 GB)
SATA : 6 Gb/s (Integrated)
SAS: 6 Gb/s (Optional)
SATA : RAID 0/1/5/6/10/50/60 (Optional)
SAS : RAID 0/1/5/6/10/50/60 (Optional)
Supported
Optional
1 [1]
1 [1]
1
16 [16]
Total: 7 slots available
2[2] x PCIe 3.0 x8 (x16 connector)
2[2] x PCIe 3.0 x4 (x8 connector)
2
1[1] x PCIe 3.0 x8 (x16 connector)
1[1] x PCIe 3.0 x8 (x8 connector) dedicated LAN slot
1[1] x PCIe 3.0 x8 (x8 connector) dedicated RAID slot
Revision 1.0, March 2012
3
CONFIGURATION GUIDE – NEC Express5800/R120d-2M
Model
Expansion Slots
[free]
(Cont.)
R120d-2M
Optional Riser Card
(N8115-25)
Optional Riser Card
(N8116-26)
Optional Riser Card
(PCI)
Video
Controller (VRAM)
Resolution / Color
Interfaces
Server Management
Redundant Fan
Redundant Power Supply
Power Supply
Power
Consumption
(Max. Config, Idling)
(Max. Config,
Operating)
Acoustical Noise
Max. Config, Idling
(Sound Pressure
Max. Config, Operating
4
Level)
Dimensions (W x D x H )
Weight (Minimum / Maximum)
Temperature, Relative Humidity
(non-condensing)
Regulatory and Safety
Operating Systems
NEC Corporation
Total: 6 slots available
1[1] x PCIe 3.0 x16 (x16 connector)
2[2] x PCIe 3.0 x4 (x8 connector)
2
1[1] x PCIe 3.0 x8 (x16 connector)
1[1] x PCIe 3.0 x8 (x8 connector) dedicated LAN slot
1[1] x PCIe 3.0 x8 (x8 connector) dedicated RAID slot
Total: 7 slots available
1[1] x PCIe 3.0 x8 (x16 connector)
2[2] x PCIe 3.0 x4 (x8 connector)
2
1[1] x PCIe 3.0 x8 (x16 connector)
1[1] x 64-bit/ 133 MHz PCI-X
1[1] x PCIe 3.0 x8 (x8 connector) dedicated LAN slot
1[1] x PCIe 3.0 x8 (x8 connector) dedicated RAID slot
Total: 7 slots available
1[1] x PCIe 3.0 x8 (x16 connector)
2
2[2] x PCIe 3.0 x4 (x8 connector)
2[2] x 64-bit / 33 MHz 5V PCI
1[1] x PCIe 3.0 x8 (x8 connector) dedicated LAN slot
1[1] x PCIe 3.0 x8 (x8 connector) dedicated RAID slot
Integrated in Server Management Controller (32MB)
3
1280 x 1024 / 16.7M
2 x VGA (15-pin mini D-sub, 1 x front, 1 x rear)
1 x Serial (9-pin mini D-sub, RS232-C, Serial B, 1 x rear)
9 x USB2.0 (2 x front, 4 x rear, 3 x internal)
2 x 1000BASE-T LAN connector (RJ-45, 2 x rear)
1 x Management LAN connector (RJ-45, 1 x rear)
EXPRESSSCOPE Engine 3
Optional, hot plug
Optional, hot plug
1 to 2 x 400 Watt or 750 Watt or 1000 Watt 80 PLUS® Platinum
certified hot plug PSU
100-240 VAC ± 10% 50 / 60 Hz ± 3 Hz
353 VA /
359 VA /
363 VA /
354 VA /
348 Watt
354 Watt
357 Watt
349 Watt
850 VA /
810 VA /
880 VA /
950 VA /
840 Watt
800 Watt
870 Watt
940 Watt
49.3dB
49.4dB
49.3dB
49.3dB
56.4dB
53.6dB
56.4dB
57.6dB
5
5
448.0 x 735.8 x 87.2 mm / 17.6 x 28.9 x 3.4 in (2U)
20.5 kg / 33 kg, 45.19 lbs. / 72.75 lbs.
6
6
Operating: 10° to 40° C / 50° to 104° F, 20 to 80%
Non-Operating: -10° to 55° C / 14° to 131° F, 20 to 80%
FCC, CE, BSMI, CCC, UL, CB, RoHS, WEEE
Microsoft® Windows Server® 2003 R2, Standard Edition
Microsoft® Windows Server® 2003 R2, Enterprise Edition
Microsoft® Windows Server® 2003 R2, Standard x64 Edition
Microsoft® Windows Server® 2003 R2, Enterprise x64 Edition
Microsoft® Windows Server® 2008 Standard
Microsoft® Windows Server® 2008 Enterprise
Microsoft® Windows Server® 2008 Standard (x64)
Microsoft® Windows Server® 2008 Enterprise (x64)
Microsoft® Windows Server® 2008 R2 Standard
Microsoft® Windows Server® 2008 R2 Enterprise
7
Red Hat Enterprise Linux 5.7 or later (x86)
Red Hat Enterprise Linux 5.7 or later (EM64T) 7
7
Red Hat Enterprise Linux 6.1 or later (x86)
7
Red Hat Enterprise Linux 6.1 or later (x86_64)
VMware ESXi 5.0 Update 1
Revision 1.0, March 2012
4
CONFIGURATION GUIDE – NEC Express5800/R120d-2M
1
2
3
4
5
6
7
An optional drive cage is required to install more than 8 hard drives.
Available only when the second processor is configured.
Maximum resolution available via EXPRESSSCOPE Engine 3 remote console is 1280 x 1024 / 65K colors.
Noise emission was measured in accordance with ISO 7779. The actual value may vary by the operating
environment.
When mounting 1000 Watt power supply, the depth is 770 mm (30.31 in).
Operable up to 35°C (95°F) when Xeon processor E5-2643 is configured with an added optional drive cage.
For Linux support, contact our sales representative or go to the NEC website at:
http://www.nec.com/global/prod/express/linux/index.html
(2 / 2)
Model
Part Number
Processor
R120d-2M
Type
Clock speed
Number of Processors
Cache
Cores and Threads
Chipset
Memory
Type
Standard Capacity
Maximum Capacity
Memory protection
Internal Storage
Standard Capacity
Maximum Capacity
Disk Controller
RAID
Expansion Slots
[free]
Hot Plug
Optical Disk Drive
Optical Drive Bays
[free]
3.5-inch Media Bays
[free]
Disk Drive Bays [free]
Standard
Optional Riser Card
(N8115-25)
NEC Corporation
N8100-1793F
Intel® Xeon®
Intel® Xeon®
Intel® Xeon®
Intel® Xeon®
processor
processor
processor
processor
E5-2650
E5-2650L
E5-2670
E5-2690
2 GHz
1.80 GHz
2.60 GHz
2.90 GHz
1 to 2
20 MB
20 MB
20 MB
20 MB
8C-16T
8C-16T
8C-16T
8C-16T
Intel® C602-J Chipset
DDR3-1333 ECC Unbuffered Low Power DIMM,
DDR3-1600 ECC Registered Low Power DIMM,
DDR3-1333 ECC Load Reduced DIMM
0 GB
768 GB (24 x 32 GB)
ECC, x4 SDDC, Memory Mirroring, Memory Lockstep, Memory
Sparing
0 GB
SAS HDD : 14.4 TB (16 x 900 GB)
SATA HDD : 16 TB (16 x 1 TB)
SAS SSD : 6.4 TB ( 16 x 400 GB)
SATA SSD : 1.6 TB (16 x 100 GB)
SATA : 6 Gb/s (Integrated)
SAS: 6 Gb/s (Optional)
SATA : RAID 0/1/5/6/10/50/60 (Optional)
SAS : RAID 0/1/5/6/10/50/60 (Optional)
Supported
Optional
1 [1]
1 [1]
1
16 [16]
Total: 7 slots available
2[2] x PCIe 3.0 x8 (x16 connector)
2[2] x PCIe 3.0 x4 (x8 connector)
2
1[1] x PCIe 3.0 x8 (x16 connector)
1[1] x PCIe 3.0 x8 (x8 connector) dedicated LAN slot
1[1] x PCIe 3.0 x8 (x8 connector) dedicated RAID slot
Total: 6 slots available
1[1] x PCIe 3.0 x16 (x16 connector)
2[2] x PCIe 3.0 x4 (x8 connector)
2
1[1] x PCIe 3.0 x8 (x16 connector)
1[1] x PCIe 3.0 x8 (x8 connector) dedicated LAN slot
1[1] x PCIe 3.0 x8 (x8 connector) dedicated RAID slot
Revision 1.0, March 2012
5
CONFIGURATION GUIDE – NEC Express5800/R120d-2M
Model
Expansion Slots
[free]
(Cont.)
R120d-2M
Optional Riser Card
(N8116-26)
Optional Riser Card
(PCI)
Video
Controller (VRAM)
Resolution / Color
Interfaces
Server Management
Redundant Fan
Redundant Power Supply
Power Supply
Power
Consumption
(Max. Config, Idling)
(Max. Config,
Operating)
Acoustical Noise
Max. Config, Idling
(Sound Pressure
Max. Config, Operating
4
Level)
Dimensions (W x D x H )
Weight (Minimum / Maximum)
Temperature, Relative Humidity
(non-condensing)
Regulatory and Safety
Operating Systems
1
2
3
4
5
Total: 7 slots available
1[1] x PCIe 3.0 x8 (x16 connector)
2[2] x PCIe 3.0 x4 (x8 connector)
2
1[1] x PCIe 3.0 x8 (x16 connector)
1[1] x 64-bit/ 133 MHz PCI-X
1[1] x PCIe 3.0 x8 (x8 connector) dedicated LAN slot
1[1] x PCIe 3.0 x8 (x8 connector) dedicated RAID slot
Total: 7 slots available
1[1] x PCIe 3.0 x8 (x16 connector)
2
2[2] x PCIe 3.0 x4 (x8 connector)
2[2] x 64-bit / 33 MHz 5V PCI
1[1] x PCIe 3.0 x8 (x8 connector) dedicated LAN slot
1[1] x PCIe 3.0 x8 (x8 connector) dedicated RAID slot
Integrated in Server Management Controller (32MB)
3
1280 x 1024 / 16.7M
2 x VGA (15-pin mini D-sub, 1 x front, 1 x rear)
1 x Serial (9-pin mini D-sub, RS232-C, Serial B, 1 x rear)
9 x USB2.0 (2 x front, 4 x rear, 3 x internal)
2 x 1000BASE-T LAN connector (RJ-45, 2 x rear)
1 x Management LAN connector (RJ-45, 1 x rear)
EXPRESSSCOPE Engine 3
Optional, hot plug
Optional, hot plug
1 to 2 x 400 Watt or 750 Watt or 1000 Watt 80 PLUS® Platinum
certified hot plug PSU
100-240 VAC ± 10% 50 / 60 Hz ± 3 Hz
361 VA /
356 VA /
359 VA /
360 VA /
356 Watt
351 Watt
354 Watt
355 Watt
880 VA /
830 VA /
920 VA /
960 VA /
870 Watt
820 Watt
910 Watt
950 Watt
49.3dB
49.4dB
49.3dB
49.3dB
56.4dB
53.6dB
56.4dB
57.6dB
5
5
448.0 x 735.8 x 87.2 mm / 17.6 x 28.9 x 3.4 in (2U)
20.5 kg / 33 kg, 45.19 lbs. / 72.75 lbs.
6
6
Operating: 10° to 40° C / 50° to 104° F, 20 to 80%
Non-Operating: -10° to 55° C / 14° to 131° F, 20 to 80%
FCC, CE, BSMI, CCC, UL, CB, RoHS, WEEE
Microsoft® Windows Server® 2003 R2, Standard Edition
Microsoft® Windows Server® 2003 R2, Enterprise Edition
Microsoft® Windows Server® 2003 R2, Standard x64 Edition
Microsoft® Windows Server® 2003 R2, Enterprise x64 Edition
Microsoft® Windows Server® 2008 Standard
Microsoft® Windows Server® 2008 Enterprise
Microsoft® Windows Server® 2008 Standard (x64)
Microsoft® Windows Server® 2008 Enterprise (x64)
Microsoft® Windows Server® 2008 R2 Standard
Microsoft® Windows Server® 2008 R2 Enterprise
7
Red Hat Enterprise Linux 5.7 or later (x86)
Red Hat Enterprise Linux 5.7 or later (EM64T) 7
7
Red Hat Enterprise Linux 6.1 or later (x86)
7
Red Hat Enterprise Linux 6.1 or later (x86_64)
VMware ESXi 5.0 Update 1
An optional drive cage is required to install more than 8 hard drives.
Available only when the second processor is configured
Maximum resolution available via EXPRESSSCOPE Engine 3 remote console is 1280 x 1024 / 65K colors.
Noise emission was measured in accordance with ISO 7779. The actual value may vary by the operating
environment.
When mounting 1000 Watt power supply, the depth is 770 mm (30.31 in).
NEC Corporation
Revision 1.0, March 2012
6
CONFIGURATION GUIDE – NEC Express5800/R120d-2M
6
7
Operable up to 35°C (95°F) when Xeon processor E5-2690 is configured with an added optional drive cage.
For Linux support, contact our sales representative or go to the NEC website at:
http://www.nec.com/global/prod/express/linux/index.html
NEC Corporation
Revision 1.0, March 2012
7
CONFIGURATION GUIDE – NEC Express5800/R120d-2M
External Views
Front and Rear Views
Front View
C
A
D F H JK L M N
O
B
EG I
P
Q
R
Legend
A.
B.
C.
D.
E.
F.
G.
H.
I.
2.5-inch Drive Bays
2.5-inch Drive Cage Bay
USB Connectors
Data LAN 1 Activity LED
Data LAN 2 Activity LED
Data LAN 3 Activity LED
Data LAN 4 Activity LED
Hard Drive Activity LED
System Status LED
NEC Corporation
J.
K.
L.
M.
N.
O.
P.
Q.
R.
BMC Reset Button
Dump (NMI) Button
System Reset Button
UID LED Button
Power Button / Power LED
VGA Connector
Media Bay
Optical Drive Bay
Pull-out Tab
Revision 1.0, March 2012
8
CONFIGURATION GUIDE – NEC Express5800/R120d-2M
Rear View
A
C
D E
F
G
H
I
B
J
K LM
N
O
Legend
A.
B.
C.
D.
E.
F.
G.
H.
PCI Slots (Full-Height)
PCI Slots (Low-Profile)
Power Supply
AC Inlet
AC Power LED
USB Connectors
Data LAN Connectors
Management LAN Connector
NEC Corporation
I.
J.
K.
L.
M.
N.
O.
Serial Port Connector
VGA Connector
Dump (NMI) Switch
UID Button/LED
DC Power LED
PCI Slot (LAN Riser)
Additional Power Supply Slot
Revision 1.0, March 2012
9
CONFIGURATION GUIDE – NEC Express5800/R120d-2M
Dimensions (mm)
450 Watt or 800 Watt Power Supply Configuration
869.9
735.8
87.2
482.0
448.0
35.0
88.0
482.0
87.4
831.9 *
1000 Watt Power Supply Configuration
869.9
735.8
87.2
NEC Corporation
Revision 1.0, March 2012
482.0
88.0
482.0
87.4
831.9 *
770.0
448.0
35.0
10
CONFIGURATION GUIDE – NEC Express5800/R120d-2M
Configuration Diagram
CHASSIS
REAR
Processor #2
6 DIMM
Slots
Minimum required components
Revision 1.0, March 2012
4 RAID BBU Slots
NEC Corporation
2 DIMM Slots
6 DIMM Slots
6 DIMM
Slots
Cooling
Fan
Legend:
Cooling Fan
Optical Drive Bay
Media Bay
Optical
Drive Bay /
Media
Bay
Redundant Cooling Fan
8 2.5-inch
Drives
2.5-inch
Drive Cage
LAN Slot
LAN
Processor #1
PCIe 3.0
PCI Riser
PCIe 3.0
RAID Slot
Hot plug
Power Supply
Hot plug
Power
Supply #1
2.5-inch
Drive Cage
Hot plug
Power Supply
#3C
#2C
#1C
8 2.5-inch
Drives
6 DIMM
Slots
Hot plug
Power
Supply #2
CHASSIS
TOP
#2B
#1B
CHASSIS
FRONT
Standard components
11
CONFIGURATION GUIDE – NEC Express5800/R120d-2M
Server Configuration
1 Base Models
Product Name / Description
Part Number
NEC Express5800/R120d-2M Server
no processor, no RAM, no HDD, no ODD, no PSU, no front bezel
Including:
2.5-inch HDD Cage, EXPRESSBUILDER DVD
N8100-1793F
NOTE:

The base model must be ordered with a processor kit.
2 Processors and Heat Sink
Available sockets: 2
Category
Product Name / Description
Part Number
Processors
1 Processor
Required
Xeon E5-2609 Processor Kit
Intel® Xeon ® Processor E5-2609 (2.40 GHz, 4C/4T, 10 MB)
Xeon E5-2630L Processor Kit
Intel® Xeon ® Processor E5-2630L (2 GHz, 6C/12T, 15 MB)
Xeon E5-2640 Processor Kit
Intel® Xeon ® Processor E5-2640 (2.40 GHz, 6C/12T, 15 MB)
Xeon E5-2643 Processor Kit
Intel® Xeon ® Processor E5-2643 (3.30 GHz, 4C/8T, 10 MB)
Xeon E5-2650 Processor Kit
Intel® Xeon ® Processor E5-2650 (2 GHz, 8C/16T, 20 MB)
Xeon E5-2650L Processor Kit
Intel® Xeon ® Processor E5-2650L (1.80 GHz, 8C/16T, 20 MB)
Xeon E5-2670 Processor Kit
Intel® Xeon ® Processor E5-2670 (2.60 GHz, 8C/16T, 20 MB)
Xeon E5-2690 Processor Kit
Intel® Xeon ® Processor E5-2690 (2.90 GHz, 8C/16T, 20 MB)
Processor Heat Sink
st
For 1 Processor
N8101-545F
Processor Heat Sink
nd
For 2 Processor, including cooling fan kit
N8101-553F
Heat Sink
1st
2nd
N8101-546F
N8101-547F
N8101-548F
N8101-549F
N8101-550F
N8101-551F
N8101-552F
(Standard)
NOTE:

Minimum one processor kit from above must be installed.

The processors must be the same to configure dual processor system.
NEC Corporation
Revision 1.0, March 2012
12
CONFIGURATION GUIDE – NEC Express5800/R120d-2M
3 Memory
3.1
Memory Configuration
Refer to the section in accordance with your memory configuration:



Independent Channel: Refer to 3.1.1
Memory Sparing Configuration: Refer to 3.1.2
Memory Mirroring / Memory Lockstep Configuration: Refer to 3.1.3
3.1.1
Independent Channel Configuration
Available slots: 12 per processor
Category
Product Name / Description
Part Number
Unbuffered DIMM
(UDIMM)
8GB DDR3-1333 UNB Memory Kit
2x 4GB Unbuffered ECC DIMM, DDR3L-1333(PC3L-10600)
NOTE:
- Up to four sets (eight slots) per processor can be installed
- This DIMM doesn’t support x4 SDDC.
N8102-435F
Registered DIMM
(RDIMM)
4GB DDR3-1600 REG Memory Kit
2x 2GB Registered ECC DIMM, DDR3L-1600(PC3L-12800)
NOTE:
- This DIMM doesn’t support x4 SDDC.
N8102-468F
8GB DDR3-1600 REG Memory Kit
2x 4GB Registered ECC DIMM, DDR3L-1600(PC3L-12800)
16GB DDR3-1600 REG Memory Kit
2x 8GB Registered ECC DIMM, DDR3L-1600(PC3L-12800)
32GB DDR3-1600 REG Memory Kit
2x 16GB Registered ECC DIMM, DDR3L-1600(PC3L-12800)
64GB DDR3-1333 LR Memory Kit
2x 32GB Load Reduced ECC DIMM, DDR3L-1333(PC3L-10600)
N8102-469F
Load Reduced
DIMM (LRDIMM)
N8102-470F
N8102-471F
N8102-440F
NOTE:

Minimum one memory kit per processor must be installed.

The configured memories must be identical.

It is recommended to install memory kits in multiples of two (four identical DIMMs) for quad-channel
symmetric memory configurations to increase memory transfer speed.

When two processors are installed, balance the DIMMs across the two processors.

Mix configurations of UDIMM/RDIMM/LRDIMM are not supported
NEC Corporation
Revision 1.0, March 2012
13
CONFIGURATION GUIDE – NEC Express5800/R120d-2M
3.1.2
Memory Sparing Configuration
Available slots: 12 per processor
Product Name / Description
Part Number
6GB DDR3-1600 REG Memory Kit
3x 2GB Registered ECC DIMM, DDR3L-1600(PC3L-12800)
12GB DDR3-1600 REG Memory Kit
3x 4GB Registered ECC DIMM, DDR3L-1600(PC3L-12800)
24GB DDR3-1600 REG Memory Kit
3x 8GB Registered ECC DIMM, DDR3L-1600(PC3L-12800)
48GB DDR3-1600 REG Memory Kit
3x 16GB Registered ECC DIMM, DDR3L-1600(PC3L-12800)
N8102-476
N8102-477
N8102-499
N8102-500
NOTE:





Minimum one memory kit per processor must be installed.
The configured memories must be identical.
When two processors are installed, balance the DIMMs across the two processors.
The logical memory capacity at the time of memory sparing becomes two-thirds of physical capacity
with configurations less than 4GB DIMM and five-sixth physical capacity with configurations more
than 8GB DIMM.
The maximum memory transfer rate is 1066 MHz.
3.1.3
Memory Mirroring / Memory Lockstep Configuration
Available slots: 12 per processor
Product Name / Description
Part Number
4GB DDR3-1600 REG Memory Kit
2x 2GB Registered ECC DIMM, DDR3L-1600(PC3L-12800)
8GB DDR3-1600 REG Memory Kit
2x 4GB Registered ECC DIMM, DDR3L-1600(PC3L-12800)
16GB DDR3-1600 REG Memory Kit
2x 8GB Registered ECC DIMM, DDR3L-1600(PC3L-12800)
32GB DDR3-1600 REG Memory Kit
2x 16GB Registered ECC DIMM, DDR3L-1600(PC3L-12800)
N8102-472
N8102-473
N8102-474
N8102-475
NOTE:

Minimum one memory kit per processor must be installed.
NEC Corporation
Revision 1.0, March 2012
14
CONFIGURATION GUIDE – NEC Express5800/R120d-2M
Memory Configuration Feature Comparison
See the table below for feature comparisons of memory configurations supported.
Independent
Channel
Memory
Sparing
Memory
Lockstep
Memory
Mirroring
Performance
Data Protection
Best
No
Better
Multiple single bit
error protection
Better
No
Redundancy
Data Correction
Available Memory
No
ECC, x4 SDDC
Full physical
memory
No
ECC, x8 SDDC
Full physical
memory
Available Memory
Channels
Notes
4
Partly
ECC, x4 SDDC
2/3 physical memory
(2, 4GB DIMM)
5/6 physical memory
(8, 16GB DIMM)
4
Good
Multiple single bit
and multi bit error
protection
Fully
ECC, x4 SDDC
Half physical
memory
4
4
All DIMMs in the
system must be
identical.
Paired DIMMs must
be identical.
Paired DIMMs must
be identical.
-
Maximum Memory Speed
See the table below for the actual maximum memory transfer speed in Independent Channel / Memory
Sparing Configuration.
DDR3 memory speed depends on the type of DIMMs, the native memory bus speed of the memory
controller and memory configuration. All memory buses operate at the clock frequency of the DIMM with
the lowest frequency.
The maximum memory transfer rate is 1066 MHz with Memory Mirroring / Memory Lockstep Configuration.
Processor Type
E5-2609
E5-2630L
E5-2640
NEC Corporation
DIMM Speed
Low (1.35V)
Normal (1.5V)
UDIMM: 4GB
-
1066 MHz
1066 MHz
-
1066 MHz
1333 MHz
RDIMM: 2, 4, 8, 16 GB
Up to 8 DIMMs
1333 MHz
1333 MHz
10 or more DIMMs
-
1066 MHz
Up to 8 DIMMs
1066 MHz
1333 MHz
10 or more DIMMs
1066 MHz
1066 MHz
-
1066 MHz
1333 MHz
Up to 8 DIMMs
1333 MHz
1600 MHz
10 or more DIMMs
-
1066 MHz
Up to 8 DIMMs
1066 MHz
1333 MHz
10 or more DIMMs
1066 MHz
1066 MHz
LRDIMM: 32GB
E5-2650
E5-2650L
E5-2643
E5-2670
E5-2690
Memory Power
Setting
Populated DIMMs
UDIMM: 4GB
RDIMM: 2, 4, 8, 16 GB
LRDIMM: 32GB
Revision 1.0, March 2012
15
CONFIGURATION GUIDE – NEC Express5800/R120d-2M
Maximum Available Memory
See the table below for the maximum memory size that you can actually use on your system.
The maximum available memory is less than the maximum physical memory supported by your system
because some chipsets require PCI resource space of about 750MB. PCI resource requirements vary
depending on the type and the number of PCI cards you are using.
Maximum Memory Size Supported by OS
Microsoft Windows Server 2003 R2, Standard Edition
Microsoft Windows Server 2008 Standard
Microsoft Windows Server 2003 R2, Standard x64 Edition
Microsoft Windows Server 2008 Standard (x64)
Microsoft Windows Server 2008 R2 Standard (x64)
Microsoft Windows Server 2003 R2, Enterprise Edition
Microsoft Windows Server 2008 Enterprise
Microsoft Windows Server 2003 R2, Enterprise x64 Edition
Microsoft Windows Server 2008 Enterprise (x64)
Microsoft Windows Server 2008 R2 Enterprise (x64)
Red Hat Enterprise Linux 5
Red Hat Enterprise Linux 6
Red Hat Enterprise Linux 5 (EM64T)
Red Hat Enterprise Linux 6 (x86_64)
1
VMware ESXi 5.0
1
Maximum Available Memory
4 GB
32 GB
4 GB (HW-DEP enabled)
App. 2 GB(HW-DEP disabled)
32 GB
64 GB
64 GB
1 TB
2 TB
768 GB
768 GB
16 GB
16 GB
256 GB
2 TB
2TB
256 GB
768 GB
768 GB
Up to 1TB of main memory is available to each virtual machine.
NEC Corporation
Revision 1.0, March 2012
16
CONFIGURATION GUIDE – NEC Express5800/R120d-2M
4 Internal Hard Disk Drives
4.1
RAID Configuration
Refer to the section in accordance with your disk form factor and RAID configuration.
Up to eight 2.5-inch Drives
Available Interface
Non-RAID
Refer to 4.2.1
SATA
RAID 0/1/10
512MB Cache
Refer to 4.2.2
SAS, SATA
RAID 5/6/50/60
512MB Cache
Refer to 4.2.3
SAS, SATA
1GB Cache
Refer to 4.2.4
SAS, SATA
Up to sixteen 2.5-inch Drives
Available Interface
RAID 0/1/10
512MB Cache
Refer to 4.2.5
SATA
RAID 5/6
512MB Cache
Refer to 4.2.6
SAS, SATA
1GB Cache
Refer to 4.2.7
SAS, SATA
NOTE:

Up to four hard drives can be installed in the Embedded SATA configuration.

Hot plug insertion/removal are not supported in the Embedded SATA configuration.

An optional RAID controller occupies one PCI slot.

All hard drives within a RAID array should be of the same capacity and rotation speed.

Use the same rotational speed of the SAS Hard drives in one system.

Up to two kinds of drives can be mixed in one system

To configure a large-capacity RAID array, it is recommended to configure in RAID 6 or RAID 60 in
order to minimize the risk of becoming multiple hard drives failure during the RAID rebuilding process.

It is recommended to set RAID array configuration drives less than eight in order to minimize the risk
of becoming multiple hard drives failure.

SAS and SATA hard drives must be installed in separate drive groups.
Group #1 Group #2
NEC Corporation
Group #3 Group #4
Revision 1.0, March 2012
17
CONFIGURATION GUIDE – NEC Express5800/R120d-2M
4.2
Internal Drive Configuration
4.2.1
Up to four Drives with Embedded SATA Controller
Category
Product Name / Description
Part Number
Storage Controller
Embedded SATA Controller
4 x SATA ports
Internal SATA Cable
1 x mini-SAS to 1 x mini-SAS
2.5-inch HDD Cage
8 x 2.5-inch Hot-plug hard drive bays
250GB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 250 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
500GB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 500 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
1TB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 1 TB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
100GB Hot Plug 2.5-inch SSD
1 x 100 GB SATA SSD, 2.5-inch, 3Gb/s
(Standard)
Cable
HDD Cage
Drive
4 slots
available
SATA
HDD
SATA
SSD
(Standard)
(Standard)
N8150-356
N8150-357
N8150-358
N8150-707
NOTE:

Hot plug insertion/removal are not supported in the configuration.

The maximum transfer speed for Slot 2 and Slot 3 is 3 Gb/s.
NEC Corporation
Revision 1.0, March 2012
18
CONFIGURATION GUIDE – NEC Express5800/R120d-2M
4.2.2
Up to eight Drives with RAID 0/1 Controller with 512 MB Cache
Category
Product Name / Description
Part Number
Storage Controller
Required
RAID Controller (512MB, RAID 0/1)
LSI MegaRAID SAS 9267-8i
RAID 0/1/10, 512 MB, Int. 8, PCIe 2.0 x8, SAS 6Gb/s,
SATA 6Gb/s
RAID Battery Backup Unit
for LSI MegaRAID SAS 9267-8i
Internal SAS/SATA Cable
1 x mini-SAS to 1 x mini-SAS, 2 sets
2.5-inch HDD Cage
8 x 2.5-inch hot plug drive bays
300GB 10K Hot Plug 2.5-inch SAS HDD
1 x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
450GB 10K Hot Plug 2.5-inch SAS HDD
1 x 450 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
600GB 10K Hot Plug 2.5-inch SAS HDD
1 x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
900GB 10K Hot Plug 2.5-inch SAS HDD
1x 900 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
73.2GB 15K Hot Plug 2.5-inch SAS HDD
1x 73.2 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
146.5GB 15K Hot Plug 2.5-inch SAS HDD
1x 146.5 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
300GB 15K Hot Plug 2.5-inch SAS HDD
1x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
250GB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 250 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
500GB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 500 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
1TB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 1 TB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
100GB Hot Plug 2.5-inch SAS SSD
1 x 100 GB SAS SSD, 2.-inch, 6Gb/s
400GB Hot Plug 2.5-inch SAS SSD
1 x 400 GB SAS SSD, 2.5-inch, 6Gb/s
100GB Hot Plug 2.5-inch SSD
1 x 100 GB SATA SSD, 2.5-inch, 3Gb/s
N8103-149
RAID BBU
Recommended
Cable
Drive Cage
Drive
8 slots
available
SAS
HDD
SATA
HDD
SAS
SSD
SATA
SSD
N8103-153
(Standard)
(Standard)
N8150-301
N8150-322
N8150-304
N8150-332
N8150-302
N8150-303
N8150-331
N8150-356
N8150-357
N8150-358
N8150-709
N8150-710
N8150-707
NOTE:

All hard drives within a RAID array should be of the same capacity and rotation speed.

SAS and SATA hard drives must be installed in separate drive groups.

Up to two kinds of drives can be mixed in one system.

Please download RAID controller driver from the web to install Windows Server 2003 R2 in the
configuration. http://www.nec.com/en/global/prod/express/download/index.html
NEC Corporation
Revision 1.0, March 2012
19
CONFIGURATION GUIDE – NEC Express5800/R120d-2M
4.2.3
Up to eight Drives with RAID 5/6 Controller with 512 MB Cache
Category
Product Name / Description
Part Number
Storage Controller
Required
RAID Controller (512MB, RAID 0/1)
LSI MegaRAID SAS 9267-8i
RAID0/1/5/6/10/50/60, 512 MB, Int. 8, PCIe 2.0 x8, SAS 6Gb/s,
SATA 6Gb/s
RAID Battery Backup Unit
for LSI MegaRAID SAS 9267-8i
Internal SAS/SATA Cable
1 x mini-SAS to 1 x mini-SAS, 2 sets
2.5-inch HDD Cage
8 x 2.5-inch hot plug drive bays
300GB 10K Hot Plug 2.5-inch SAS HDD
1 x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
450GB 10K Hot Plug 2.5-inch SAS HDD
1 x 450 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
600GB 10K Hot Plug 2.5-inch SAS HDD
1 x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
900GB 10K Hot Plug 2.5-inch SAS HDD
1x 900 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
73.2GB 15K Hot Plug 2.5-inch SAS HDD
1x 73.2 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
146.5GB 15K Hot Plug 2.5-inch SAS HDD
1x 146.5 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
300GB 15K Hot Plug 2.5-inch SAS HDD
1x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
250GB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 250 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
500GB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 500 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
1TB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 1 TB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
100GB Hot Plug 2.5-inch SAS SSD
1 x 100 GB SAS SSD, 2.-inch, 6Gb/s
400GB Hot Plug 2.5-inch SAS SSD
1 x 400 GB SAS SSD, 2.5-inch, 6Gb/s
100GB Hot Plug 2.5-inch SSD
1 x 100 GB SATA SSD, 2.5-inch, 3Gb/s
N8103-150
RAID BBU
Recommended
Cable
Drive Cage
Drive
8 slots
available
SAS
HDD
SATA
HDD
SAS
SSD
SATA
SSD
N8103-153
(Standard)
(Standard)
N8150-301
N8150-322
N8150-304
N8150-332
N8150-302
N8150-303
N8150-331
N8150-356
N8150-357
N8150-358
N8150-709
N8150-710
N8150-707
NOTE:

All hard drives within a RAID array should be of the same capacity and rotation speed.

Use the same rotational speed of the SAS Hard drives in one system.

SAS and SATA hard drives must be installed in separate drive groups.

Up to two kinds of drives can be mixed in one system.

To configure a large-capacity RAID array, it is recommended to configure in RAID 6 or RAID 60 in
order to minimize the risk of becoming multiple hard drives failure during the RAID rebuilding process.

Please download RAID controller driver from the web to install Windows Server 2003 R2 in the
configuration. http://www.nec.com/en/global/prod/express/download/index.html
NEC Corporation
Revision 1.0, March 2012
20
CONFIGURATION GUIDE – NEC Express5800/R120d-2M
4.2.4
Up to eight Drives with RAID 5/6 Controller with 1 GB Cache
Category
Product Name / Description
Part Number
Storage Controller
Required
RAID Controller (1GB, RAID 0/1/5/6)
LSI MegaRAID SAS 9267-8i
RAID0/1/5/6/10/50/60, 1 GB, Int. 8, PCIe 2.0 x8, SAS 6Gb/s,
SATA 6Gb/s
RAID Battery Backup Unit
for LSI MegaRAID SAS 9267-8i
MegaRAID CacheCade
for LSI MegaRAID SAS 9267-8i
NOTE:
- SSD used for cache is required
- The SSD capacity which can be used as read cache is up to 512
GB.
N8103-151
Internal SAS/SATA Cable
1 x mini-SAS to 1 x mini-SAS, 2 sets
2.5-inch HDD Cage
8 x 2.5-inch hot plug drive bays
300GB 10K Hot Plug 2.5-inch SAS HDD
1 x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
450GB 10K Hot Plug 2.5-inch SAS HDD
1 x 450 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
600GB 10K Hot Plug 2.5-inch SAS HDD
1 x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
900GB 10K Hot Plug 2.5-inch SAS HDD
1x 900 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
73.2GB 15K Hot Plug 2.5-inch SAS HDD
1x 73.2 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
146.5GB 15K Hot Plug 2.5-inch SAS HDD
1x 146.5 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
300GB 15K Hot Plug 2.5-inch SAS HDD
1x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
250GB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 250 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
500GB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 500 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
1TB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 1 TB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
100GB Hot Plug 2.5-inch SAS SSD
1 x 100 GB SAS SSD, 2.-inch, 6Gb/s
400GB Hot Plug 2.5-inch SAS SSD
1 x 400 GB SAS SSD, 2.5-inch, 6Gb/s
100GB Hot Plug 2.5-inch SSD
1 x 100 GB SATA SSD, 2.5-inch, 3Gb/s
(Standard)
RAID BBU
Recommended
SSD Caching
Recommended
Cable
Drive Cage
Drive
8 slots
available
SAS
HDD
SATA
HDD
SAS
SSD
SATA
SSD
N8103-153
N8103-156
(Standard)
N8150-301
N8150-322
N8150-304
N8150-332
N8150-302
N8150-303
N8150-331
N8150-356
N8150-357
N8150-358
N8150-709
N8150-710
N8150-707
NOTE:

All hard drives within a RAID array should be of the same capacity and rotation speed.

Use the same rotational speed of the SAS Hard drives in one system.

SAS and SATA hard drives must be installed in separate drive groups.

Up to two kinds of drives can be mixed in one system.

To configure a large-capacity RAID array, it is recommended to configure in RAID 6 or RAID 60 in
order to minimize the risk of becoming multiple hard drives failure during the RAID rebuilding process.

Please download RAID controller driver from the web to install Windows Server 2003 R2 in the
configuration. http://www.nec.com/en/global/prod/express/download/index.html
NEC Corporation
Revision 1.0, March 2012
21
CONFIGURATION GUIDE – NEC Express5800/R120d-2M
4.2.5
Up to sixteen Drives with RAID 0/1 Controller with 512 MB Cache
Category
Product Name / Description
Part Number
Storage Controller
Required
RAID Controller (512MB, RAID 0/1)
LSI MegaRAID SAS 9267-8i
RAID 0/1/10, 512MB, Int. 8, PCIe 2.0 x8, SAS 6Gb/s, SATA 6Gb/s
RAID Battery Backup Unit
for LSI MegaRAID SAS 9267-8i
Internal SAS/SATA Cable
1 x mini-SAS to 1 x mini-SAS, 6 sets
2.5-inch HDD Cage
8 x 2.5-inch hot plug drive bays
2.5-Inch HDD Cage
8 x 2.5-inch hot plug drive bays
Including 6sets of 1 x mini-SAS to 1 x mini-SAS cable, SAS
expander card
300GB 10K Hot Plug 2.5-inch SAS HDD
1 x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
450GB 10K Hot Plug 2.5-inch SAS HDD
1 x 450 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
600GB 10K Hot Plug 2.5-inch SAS HDD
1 x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
900GB 10K Hot Plug 2.5-inch SAS HDD
1x 900 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
73.2GB 15K Hot Plug 2.5-inch SAS HDD
1x 73.2 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
146.5GB 15K Hot Plug 2.5-inch SAS HDD
1x 146.5 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
300GB 15K Hot Plug 2.5-inch SAS HDD
1x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
250GB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 250 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
500GB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 500 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
1TB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 1 TB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
100GB Hot Plug 2.5-inch SAS SSD
1 x 100 GB SAS SSD, 2.-inch, 6Gb/s
400GB Hot Plug 2.5-inch SAS SSD
1 x 400 GB SAS SSD, 2.5-inch, 6Gb/s
100GB Hot Plug 2.5-inch SSD
1 x 100 GB SATA SSD, 2.5-inch, 3Gb/s
N8103-149
RAID BBU
Recommended
Cable
Drive Cage
Optional Drive
Cage
Required
Drive
8 slots
available
SAS
HDD
SATA
HDD
SAS
SSD
SATA
SSD
N8103-153
(Standard)
(Standard)
N8154-39
N8150-301
N8150-322
N8150-304
N8150-332
N8150-302
N8150-303
N8150-331
N8150-356
N8150-357
N8150-358
N8150-709
N8150-710
N8150-707
NOTE:

All hard drives within a RAID array should be of the same capacity and rotation speed.

Use the same rotational speed of the SAS Hard drives in one system.

SAS and SATA hard drives must be installed in separate drive groups.

Up to two kinds of drives can be mixed in one system.

To configure a large-capacity RAID array, it is recommended to configure in RAID 6 or RAID 60 in
order to minimize the risk of becoming multiple hard drives failure during the RAID rebuilding process.

Please download RAID controller driver from the web to install Windows Server 2003 R2 in the
configuration. http://www.nec.com/en/global/prod/express/download/index.html
NEC Corporation
Revision 1.0, March 2012
22
CONFIGURATION GUIDE – NEC Express5800/R120d-2M
4.2.6
Up to sixteen Drives with RAID 5/6 Controller with 512 MB Cache
Category
Product Name / Description
Part Number
Storage Controller
Required
RAID Controller (512MB, RAID 0/1/5/6)
LSI MegaRAID SAS 9267-8i
RAID0/1/5/6/10/50/60, 512MB, Int. 8, PCIe 2.0 x8, SAS 6Gb/s,
SATA 6Gb/s
RAID Battery Backup Unit
for LSI MegaRAID SAS 9267-8i
Internal SAS/SATA Cable
1 x mini-SAS to 1 x mini-SAS, 6 sets
2.5-inch HDD Cage
8 x 2.5-inch hot plug drive bays
2.5-Inch HDD Cage
8 x 2.5-inch hot plug drive bays
Including six sets of 1 x mini-SAS to 1 x mini-SAS cable, SAS
expander card
300GB 10K Hot Plug 2.5-inch SAS HDD
1 x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
450GB 10K Hot Plug 2.5-inch SAS HDD
1 x 450 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
600GB 10K Hot Plug 2.5-inch SAS HDD
1 x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
900GB 10K Hot Plug 2.5-inch SAS HDD
1x 900 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
73.2GB 15K Hot Plug 2.5-inch SAS HDD
1x 73.2 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
146.5GB 15K Hot Plug 2.5-inch SAS HDD
1x 146.5 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
300GB 15K Hot Plug 2.5-inch SAS HDD
1x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
250GB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 250 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
500GB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 500 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
1TB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 1 TB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
100GB Hot Plug 2.5-inch SAS SSD
1 x 100 GB SAS SSD, 2.-inch, 6Gb/s
400GB Hot Plug 2.5-inch SAS SSD
1 x 400 GB SAS SSD, 2.5-inch, 6Gb/s
100GB Hot Plug 2.5-inch SSD
1 x 100 GB SATA SSD, 2.5-inch, 3Gb/s
N8103-150
RAID BBU
Recommended
Cable
Drive Cage
Optional Drive
Cage
Required
Drive
16 slots
available
SAS
HDD
SATA
HDD
SAS
SSD
SATA
SSD
N8103-153
(Standard)
(Standard)
N8154-39
N8150-301
N8150-322
N8150-304
N8150-332
N8150-302
N8150-303
N8150-331
N8150-356
N8150-357
N8150-358
N8150-709
N8150-710
N8150-707
NOTE:

All hard drives within a RAID array should be of the same capacity and rotation speed.

Use the same rotational speed of the SAS Hard drives in one system.

SAS and SATA hard drives must be installed in separate drive groups.

Up to two kinds of drives can be mixed in one system.

To configure a large-capacity RAID array, it is recommended to configure in RAID 6 or RAID 60 in
order to minimize the risk of becoming multiple hard drives failure during the RAID rebuilding process.

It is recommended to set RAID array configuration drives less than eight in order to minimize the risk
of becoming multiple hard drives failure.

Please download RAID controller driver from the web to install Windows Server 2003 R2 in the
configuration. http://www.nec.com/en/global/prod/express/download/index.html
NEC Corporation
Revision 1.0, March 2012
23
CONFIGURATION GUIDE – NEC Express5800/R120d-2M
4.2.7
Up to sixteen Drives with RAID 5/6 Controller with 1 GB Cache
Category
Product Name / Description
Part Number
Storage Controller
Required
RAID Controller (512MB, RAID0/1/5/6)
LSI MegaRAID SAS 9267-8i
RAID 0/1/5/6/10/50/60, 1 GB, Int. 8, PCIe 2.0 x8, SAS 6Gb/s,
SATA 6Gb/s
RAID Battery Backup Unit
for LSI MegaRAID SAS 9267-8i
MegaRAID CacheCade
for LSI MegaRAID SAS 9267-8i
NOTE:
- SSD used for cache is required
- The SSD capacity which can be used as read cache is up to 512
GB.
N8103-151
Internal SAS/SATA Cable
1 x mini-SAS to 1 x mini-SAS,6 sets
2.5-inch HDD Cage
8 x 2.5-inch hot plug drive bays
2.5-Inch HDD Cage
8 x 2.5-inch hot plug drive bays
Including six sets of 1 x mini-SAS to 1 x mini-SAS cable, SAS
expander card
300GB 10K Hot Plug 2.5-inch SAS HDD
1 x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
450GB 10K Hot Plug 2.5-inch SAS HDD
1 x 450 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
600GB 10K Hot Plug 2.5-inch SAS HDD
1 x 600 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
900GB 10K Hot Plug 2.5-inch SAS HDD
1x 900 GB SAS HDD, 2.5-inch, 6Gb/s, 10,000 rpm
73.2GB 15K Hot Plug 2.5-inch SAS HDD
1x 73.2 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
146.5GB 15K Hot Plug 2.5-inch SAS HDD
1x 146.5 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
300GB 15K Hot Plug 2.5-inch SAS HDD
1x 300 GB SAS HDD, 2.5-inch, 6Gb/s, 15,000 rpm
250GB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 250 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
500GB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 500 GB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
1TB 7.2K Hot Plug 2.5-inch SATA HDD
1 x 1 TB SATA HDD, 2.5-inch, 6Gb/s, 7,200 rpm
100GB Hot Plug 2.5-inch SAS SSD
1 x 100 GB SAS SSD, 2.-inch, 6Gb/s
400GB Hot Plug 2.5-inch SAS SSD
1 x 400 GB SAS SSD, 2.5-inch, 6Gb/s
100GB Hot Plug 2.5-inch SSD
1 x 100 GB SATA SSD, 2.5-inch, 3Gb/s
(Standard)
RAID BBU
Recommended
SSD Caching
Recommended
Cable
Drive Cage
Optional Drive
Cage
Required
Drive
16 slots
available
SAS
HDD
SATA
HDD
SAS
SSD
SATA
SSD
N8103-153
N8103-156
(Standard)
N8154-39
N8150-301
N8150-322
N8150-304
N8150-332
N8150-302
N8150-303
N8150-331
N8150-356
N8150-357
N8150-358
N8150-709
N8150-710
N8150-707
NOTE:

All hard drives within a RAID array should be of the same capacity and rotation speed.

Use the same rotational speed of the SAS Hard drives in one system.

SAS and SATA hard drives must be installed in separate drive groups.

Up to two kinds of drives can be mixed in one system.

To configure a large-capacity RAID array, it is recommended to configure in RAID 6 or RAID 60 in
order to minimize the risk of becoming multiple hard drives failure during the RAID rebuilding process.
NEC Corporation
Revision 1.0, March 2012
24
CONFIGURATION GUIDE – NEC Express5800/R120d-2M


It is recommended to set RAID array configuration drives less than eight in order to minimize the risk
of becoming multiple hard drives failure.
Please download RAID controller driver from the web to install Windows Server 2003 R2 in the
configuration. http://www.nec.com/en/global/prod/express/download/index.html
5 Optical Drive
Category
Product Name / Description
Part Number
Internal
1 slot available
Internal Slim DVD-ROM drive
Slim DVD-ROM drive
Internal DVD Super Multi Drive
Slim DVD Super Multi drive, not including writing software
External DVD-ROM drive
Slim DVD-ROM drive, Bus powered, 0.8 A required
N8151-100
External
N8151-104F
N8160-85
NOTE:

Up to 1 optical drive can be connected.
6 Internal Tape / RDX Drives
6.1
Tape / RDX Drive Selection
Refer to the section in accordance with your type of tape drives:

DAT: Refer to 6.2.1
RDX: Refer to 6.2.2
NOTE:

Tape devices cannot be directly connected to VMware systems. For VMware systems, it is
recommended to connect and configure an additional backup server via network.

6.2
Tape / RDX Configuration
6.2.1
DAT
Category
Product Name / Description
Part Number
Controller
Internal USB Controller
1 x USB port
Internal USB cable
1 x Internal USB to 1 x USB device
(Standard)
Internal DAT (USB)
DDS3 / DDS4 / DAT72, Native capacity 36 GB
NOTE: DDS1 / DDS2 format are not supported
N8151-69
Internal DAT (USB)
DDS4 / DAT72 / DAT160, Native capacity 80 GB
NOTE: DDS1 / DDS2 / DDS3 format are not supported
N8151-78
Category
Product Name / Description
Part Number
Controller
Internal USB Controller
1 x USB port
Internal USB cable
1 x Internal USB to 1 x USB device
(Standard)
Internal RDX (USB)
N8151-86
Cable
Drive
1 bay available
6.2.2
RDX
Cable
Drive
1 bay available
NEC Corporation
(Standard)
Revision 1.0, March 2012
(Standard)
25
CONFIGURATION GUIDE – NEC Express5800/R120d-2M
7 PCI Riser Card / PCI Card
Please refer to Supporting PCI Cards and Installable Slots with regard to the position of PCI slot which can
mount PCI card supported.
7.1
PCI Riser Card
Product Name / Description
Part Number
PCIe Riser Card Kit
2 x PCIe 3.0 x8
PCIe x16 Riser Card Kit
1 x PCIe 3.0 x16
PCI-X Riser Card Kit
1 x 64-bit/133 MHz PCI-X, 1x PCIe 3.0 x8
PCI Riser Card Kit
2x 64-bit/33 MHz PCI (5V)
NOTE:
The riser card is make-to-order product. Please consult our sales representative in regard
to production lead time.
The card is not supported on VMware ESXi systems.
(Standard)
7.2
N8116-25
N8116-26
N8116-27
Full Length PCI Card installation Kit
For a full-length PCI card (D=312mm/12.28 in) installation in PCI Slot #1B
Product Name / Description
Part Number
Full Length PCI Card installation Kit
For a full-length installation, contains special heat sinks
N8116-28
Note:
 Obtain the graphics board installation kit in addition to this product when to install graphics board.
 Since this product is make-to-order manufacturing, the support is provided individually. Contact our
sales representative for details.
 Starts shipping on May 25, 2012.
7.3
Graphics Card Installation Kit
For an installation of the Video card which is used for Micorosoft RemoteFX
Product Name / Description
Part Number
Graphics Card Installation Kit
Power cables for Video card (six-pin), a retainer to secure the graphics board
N8116-29
NOTE:

Since this product is make-to-order manufacturing, the support is provided individually. Contact our
sales representative for details.

This product doesn't support/guarantee installation of the video card.

Starts shipping on May 25, 2012.
NEC Corporation
Revision 1.0, March 2012
26
CONFIGURATION GUIDE – NEC Express5800/R120d-2M
7.4
LAN Controller
Category
Riser
GbE
10GbE
Adapter
GbE
10GbE
SPF+
Module
NEC Corporation
Product Name / Description
Part Number
Dual Port 1000BASE-T Riser Card
Broadcom® BCM5718 Gigabit Ethernet Controller
PCIe 2.0 x8
Dual Port 10GBASE SFP+ Riser Card
Broadcom® BCM57810 Converged Controller
PCIe 3.0 x8
NOTE:
- N8104-129 SFP+ Module is required to connect with an optical
cable.
- Up to two SFP+ Modules can be installed.
- Supports up to two adapters of 10Gb Converged Network
Adapter and 10Gb Network Adapter.
N8104-135
1000BASE-T Adapter
Broadcom ® BCM5718 Gigabit Ethernet Controller
PCIe 2.0 x1, FP / FH
Dual Port 1000BASE-T Adapter
Broadcom ® BCM5718 Gigabit Ethernet Controller
PCIe 2.0 x1, FP / FH
Quad Port 1000BASE-T Adapter
Broadcom ® BCM5719 Gigabit Ethernet Controller
PCIe 2.0 x4, FP / FH
NOTE:
- Network cables with RJ-45 plug covers cannot be used.
- Jumbo frames are not supported.
N8104-138
10GBASE Adapter (SFP+/2ch)
Broadcom NetXtreme II BCM957711 10G SFP+ Dual Port
Network Interface Card
PCIe 2.0 x8, LP / FH
NOTE:
- N8104-129 SFP+ Module is required to connect with an optical
cable.
- Up to 2 SFP+ Modules can be installed.
- Supports up to 2 adapters covering 10Gb Converged Network
Adapter and 10Gb Network Adapter.
Dual Port 10Gb Converged Network Adapter
BROCADE 1020 Dual Port 10Gbps Converged Network Adapter
PCIe 2.0 x8, LP / FH, 2 x SFP modules, Max. one adapter
NOTE:
- N8104-129 SFP+ Module is required to connect with an optical
cable.
- Up to 2 SFP+ Modules can be installed.
- Supports up to two adapters of10Gb Converged Network
Adapter and 10Gb Network Adapter.
N8104-128
SFP+ Module (10G-SR)
1 x SFP+ Module for N8104-128 and N8104-137
N8104-129
Revision 1.0, March 2012
N8104-137
N8104-132
N8104-133
N8104-131
27
CONFIGURATION GUIDE – NEC Express5800/R120d-2M
Teaming feature - Teaming and bonding features
See the table below for supported network interfaces and OS combinations.
Windows supports BASP (Broadcom Advanced Server Program) teaming while Linux supports teaming
with bonding function supported by OS.
Network Interface
GbE LAN controller
Standard network and
N8104-135/-138/-132/-133
10GbE LAN controller
N8104-128/137
Team
OS
Up to four teams per one system
Up to four ports per one team
Windows Server
Red Hat Linux
Up to two teams per one system
Up to two ports per one team
Windows Server
2008/2008R2
NOTE:

Teaming feature is not supported on iSCSI interfaces.

The network interfaces for teaming must be the same.

10GbE LAN teaming must be processed in a single LAN controller.

When 10GbE and 1GbE LAN teamings are mixed, the teams must be up to four per one system.
NEC Corporation
Revision 1.0, March 2012
28
CONFIGURATION GUIDE – NEC Express5800/R120d-2M
7.5
External Storage Controller
7.5.1
RAID Controller
Category
Product Name / Description
Part Number
Controller
RAID Controller (512MB, RAID0/1/5/6)
LSI MegaRAID SAS 9285-8e
RAID0/1/5/6/10/50/60, 1GB, Ext. 8, PCIe 2.0 x8, SAS 6Gb/s,
SATA 6Gb/s, LP / FH, Max. two adapters
RAID Battery Backup Unit
for LSI MegaRAID SAS 9285-8e
N8103-160
RAID BBU
N8103-162
NOTE:

To configure a large-capacity RAID array, it is recommended to configure in RAID 6 or RAID 60 in
order to minimize the risk of becoming multiple hard drives failure during the RAID rebuilding process.

It is recommended to set RAID array configuration drives less than eight in order to minimize the risk
of becoming multiple hard drives failure.
7.5.2
Fibre Channel / SAS Controller
Category
Product Name / Description
Part Number
Fibre Channel
Fibre Channel Controller (1ch)
Emulex LightPulse LPe1250-F8 Host Bus Adapter
8Gb/s, Optical, PCIe 2.0 x8, LP / FH
Fibre Channel Controller (2ch)
Emulex LightPulse LPe12002-M8 Host Bus Adapter
8Gb/s, Optical, PCIe 2.0 x8, LP / FH
SAS Controller
LSI SAS3442E-R Host Bus Adapter
3Gb/s SAS, Int. 4 / Ext. 4, SFF-8484 / SFF8470, PCIe x8,
LP/FH, Max. three adapters
SAS Controller
LSI SAS9212-4i4 Host Bus Adapter
6Gb/s SAS, Int. 4 / Ext. 4, 7-pin SATA / SFF-8088, PCIe 2.0 x8,
LP/FH, Max. three adapters
N8190-153
SAS
7.6
N8190-154
N8103-104A
N8103-142
Serial Port Adapter
Product Name / Description
Part Number
Serial Port Adapter
Serial port fixed to PCI bracket
N8117-01A
NEC Corporation
Revision 1.0, March 2012
29
CONFIGURATION GUIDE – NEC Express5800/R120d-2M
8 Other Add-in Components
8.1
Power Supply Module
Product Name / Description
Part Number
450W Hot Plug Power Supply
1 x 450 Watt 80 PLUS® Platinum
800W Hot Plug Power Supply
1 x 800 Watt 80 PLUS® Platinum
1000W Hot Plug Power Supply
1 x 800 Watt 80 PLUS® Platinum
N8181-86F
N8181-87F
N8181-88F
NOTE:

The power units must be the same to configure redundancy.

Use the NEC Power Supply Selector to select appropriate size for power units. For details, please
visit the NEC website at:
http://www.nec.com/en/global/prod/express/collateral/tools/PowerSelector_G01.xls
8.2
Redundant Fan Kit
Product Name / Description
Part Number
Redundant Fan Kit
5 hot plug redundant cooling fans for R120d-2M
N8181-89
8.3
Trusted Platform Module Kit
Product Name / Description
Part Number
Trusted Platform Module Kit
TPM 1.2 module
N8115-08
NOTE:

The kit is not available in China.

The kit is not removable after attachment.

"TPM Support" in BIOS setup menu must be activated prior to use of this kit.

To use Windows BitLocker drive encryption, be sure to keep the "recovery password" of BitLocker
function. The recovery password is required to restore data for hardware replacement during a
system error.
8.4
Internal Flash Memory
Available socket: 1
Product Name / Description
Part Number
Internal Flash Memory
Internal flash memory to enable software and tools in the EXPRESSBUILDR DVD without
DVD media
NOTE:
Before use, software and tools must be copied from the EXPRESSBUILDER DVD to the
flash memory.
The following operations can be performed with the flash memory:
- Installation of Windows server with express setup
- Installation of Starter Pack—the package of NEC qualified drivers and system setting
tools
- Installation of NEC ESMPRO Agent and Universal RAID Utility
- Performance of the Test and Diagnosis Tool
N8115-05
NEC Corporation
Revision 1.0, March 2012
30
CONFIGURATION GUIDE – NEC Express5800/R120d-2M
8.5
Flash FDD
Choose the Flash FDD if you need to prepare an alternative device for a floppy drive.
Product Name / Description
Part Number
Flash FDD
USB flash emulating USB floppy disk, Native capacity 1.44 MB
N8160-86
8.6
Front Bezel
Product Name / Description
Part Number
Front Bezel
Front bezel for R120d-2M
N8146-26F
9 Add-on Components
9.1
17-inch LCD Console Drawer
Category
Drawer
Drawer
w/ KVM
Cable
Drawer
Drawer
w/o KVM
9.2
Product Name / Description
Part Number
17inch LCD Console Unit (1U/8port)
17-inch LCD, US 83-keys Keyboard, Optical mouse, 8 port
KVM switch, 1U height
Switch Unit Connection Cable Set (USB, 1.8m)
1.8 m, 1 x 15-pin mini D-sub to 1 x 15-pin mini D-sub / 1 x 4-pin
USB A
Switch Unit Connection Cable Set (USB, 3m)
3 m, 1 x 15-pin mini D-sub to 1 x 15-pin mini D-sub / 1 x 4-pin
USB A
Switch Unit Connection Cable Set (USB, 5m)
5 m, 1 x 15-pin mini D-sub to 1 x 15-pin mini D-sub / 1 x 4-pin
USB A
17inch LCD Console Unit 1U
17-inch LCD, US 83-keys Keyboard, Optical mouse, 1U height,
4-pin USB B to 4-pin USB A cable 2m, PS/2 Y-splitter cable 2m,
15-pin mini D-sub VGA cable 2m
N8143-69F
K410-118(1A)
K410-118(03)
K410-118(05)
N8143-76F
KVM Switch
Category
Product Name / Description
Part Number
KVM Switch
Server Switch Unit (8 server)
1U USB 8 port KVM switch
Switch Unit Connection Cable Set (USB,1.8m)
1.8 m, 1 x 15-pin mini D-sub to 1 x 15-pin mini D-sub / 1 x 4-pin
USB A
Switch Unit Connection Cable Set (USB,3m)
3 m, 1 x 15-pin mini D-sub to 1 x 15-pin mini D-sub / 1 x 4-pin
USB A
Switch Unit Connection Cable Set (USB,3m)
5 m, 1 x 15-pin mini D-sub to 1 x 15-pin mini D-sub / 1 x 4-pin
USB A
N8191-12F
Cable
9.1
K410-118(1A)
K410-118(03)
K410-118(05)
Cable Management Arm
Product Name / Description
Part Number
Cable Management Arm 2U Kit
For R120d-2M
N8143-78
NEC Corporation
Revision 1.0, March 2012
31
CONFIGURATION GUIDE – NEC Express5800/R120d-2M
9.2
Server Management License
The server integrates the EXPRESSSCOPE Engine 3 as standard. Refer to Server Management for the
standard management features. For more extensive remote KVM and remote media features, choose the
following kit.
Product Name / Description
Part Number
Remote KVM and Media License Kit
N8115-04
License for one server.
Remote KVM and remote media are enabled regardless of OS status.
Remote KVM:
Displays a graphics console on the web browser of the remote terminal
(PC/server).
Controls keyboard and mouse via the remote terminals' web browser
Remote media:
Enables the user to use the CD / DVD / FD / Flash memory of the remote terminals
(PC/server) as if accessing the local drives.
NOTE: Remote KVM and remote media features are not available for virtual machines.
9.3
Medium and Cartridge
Category
Product Name
Drive supported
Part Number
DAT
DAT72(36GB) Medium 5 pack
N8151-69
N8151-78
N8152-08
DAT160(80GB) Medium 5 pack
N8151-78
N8152-14
DAT160 WORM (80GB) Medium
N8151-78
N8152-21
RDX Cartridge (320GB)
N8151-86
N8152-26
RDX Cartridge (500GB)
N8151-86
N8152-27
RDX Cartridge (1TB)
N8151-86
N8152-33
RDX
NEC Corporation
Revision 1.0, March 2012
32
CONFIGURATION GUIDE – NEC Express5800/R120d-2M
References
Server Management
The EXPRESSSCOPE Engine 3, integrated into the server, provides superior remote control and system
management features listed in the table below.
Standard
Hardware
monitoring
Boot monitoring
Alerting
Remote KVM
(via LAN)
Remote control
(via LAN)
Others
Remote wakeup
Centralized
management
Industry standard
1
2
With Remote KVM
and Media License
kit
Temperature/voltage/power/
fan /degeneration (memory/hard drive)
Hardware event log collection
Booting, BIOS/POST stall, OS stall,
shutdown
HW error, Boot error and OS panic
(by SNMP, E-Mail)
POST/BIOS setup, DOS utility
Panic screen, Boot screen
Text-based screen (OS console)
GUI-based screen (OS console)
Remote reset/power on-off/ dump
OS shutdown
Remote media (CD/DVD/FD)
Server Management Command Line
Protocol (DMTF compliant)
Remote control via Web browser
(without dedicated app)
Remote batch
Scheduling (without UPS)
Set automatic IP address via DNS/DHCP
Wake On LAN, Wake On Ring
Monitoring and control of multiple servers








IPMI
2

2

2


1







1






1





1




2.0
2.0
The feature is not supported on VMware ESXi systems.
The standard serial port is not available for the feature.
NEC Corporation
Revision 1.0, March 2012
33
CONFIGURATION GUIDE – NEC Express5800/R120d-2M
OS Support Matrix for PCI Cards
ESXi 5.0
RHEL 5 x64
RHEL 5
RHEL 6 x64
RHEL 6
WS 2003R2 x64
WS 2003R2
WS 2008 x64
WS 2008
WS 2008R2
Part number
Product Name
N8103-149
RAID Controller (512 MB, RAID 0/1)
N8103-150
RAID Controller (512 MB, RAID 0/1/5/6)
N8103-151
RAID Controller (1 GB,RAID 0/1/5/6)
N8103-160
RAID Controller (1 GB,RAID 0/1/5/6)
N8103-104A
SAS Controller
N8103-142
SAS Controller
N8190-153
Fibre Channel Controller
N8190-154
Fibre Channel Controller (2ch)
N8104-135
Dual Port 1000BASE-T Riser Card
N8104-138
1000BASE-T adapter
N8104-132
Dual Port 1000BASE-T Adapter
N8104-133
Quad Port 1000BASE-T Adapter
N8104-137
Dual Port 10GBASE SFP+ Riser Card
N8104-128
10GBASE adapter (SFP+/2ch)
N8104-131
Dual Port 10Gb Converged Network Adapter
NEC Corporation











- - - - - - 
- - -
Revision 1.0, March 2012
34
CONFIGURATION GUIDE – NEC Express5800/R120d-2M
Supporting PCI Cards and Installable Slots
Standard Riser Card
Part Number
N8103-149
N8103-150
N8103-151
N8103-160
N8103-104A
N8103-142
N8190-153
N8190-154
N8104-135
N8104-138
N8104-132
N8104-133
N8104-137
N8104-128
N8104-131
N8117-01A
1
2
3
Product Name
Slots
Slot # :
PCI Slot:
Card height:
Slot type:
Installable card length (mm) :
RAID Controller (512 MB, RAID 0/1)
[PCIe 2.0 x8]
RAID Controller (512 MB, RAID 0/1/5/6)
[PCIe 2.0 x8]
RAID Controller (1 GB,RAID 0/1/5/6)
[PCIe 2.0 x8]
RAID Controller (1 GB,RAID 0/1/5/6)
[PCIe 2.0 x8]
SAS Controller
[PCIe x8]
SAS Controller
[PCIe 2.0 x8]
Fibre Channel Controller
[PCIe 2.0 x8]
Fibre Channel Controller (2ch)
[PCIe 2.0 x8]
Dual Port 1000BASE-T Riser Card
[PCIe 2.0 x1]
1000BASE-T adapter
[PCIe 2.0 x1]
Dual Port 1000BASE-T Adapter
[PCIe 2.0 x1]
Quad Port 1000BASE-T Adapter
[PCIe 2.0 x4]
Dual Port 10GBASE SFP+ Riser Card
[PCIe 2.0 x8]
10GBASE adapter (SFP+/2ch)
[PCIe 2.0 x8]
Dual Port 10Gb Converged Network Adapter
[PCIe 2.0 x8]
#1A
X8
x8
-
#1B
x8
FH
x16
312 2
#2B
x8
FH
x16
312
#1C
x4
LP
x8
220
#2C
x4
LP
x8
220
#3C 1
x8
FH
x16
220
#1D
x8
x8
-

-
-
-
-
-
-

-
-
-
-
-
-

-
-
-
-
-
-
-


-


-
-





-
-





-
-


-


-
-


-
-

-
-
-
-
-
-
-

-





-
-



2

-
-





-
-
-
-
-
-
-

-


-
-

-
-


-
-

-
Serial Port Adapter
-
-
-



-
Available in dual-processor configuration
To install a PCI card for more than 220 mm (8.66 in), N8116-28 full-length PCI installation kit is required.
Not available with Windows Server 2003 R2.
NEC Corporation
Revision 1.0, March 2012
35
CONFIGURATION GUIDE – NEC Express5800/R120d-2M
N8116-25 PCIe x16 Riser Card Kit
Part Number
N8103-149
N8103-150
N8103-151
N8103-160
N8103-104A
N8103-142
N8190-153
N8190-154
N8104-135
N8104-138
N8104-132
N8104-133
N8104-137
N8104-128
N8104-131
N8117-01A
1
2
3
Product Name
Slots

#1B
x16
FH
x16
312 2
-
#1C
x4
LP
x8
220
-
#2C
x4
LP
x8
220
-
#3C 1
x8
FH
x16
220
-
#1D
x8
x8
-

-
-
-
-
-

-
-
-
-
-
-

-


-
-
-



-
-
-



-
-
-
-


-
-
-
-
-

-
-
-
-
-
-

-
-



-
-
-

1

-
-
-



-
-
-
-
-
-

-
-
-
-

-
-
-
-
-

-
-
-



-
Slot # :
PCI Slot:
Card height:
Slot type:
Installable card length (mm) :
RAID Controller (512 MB, RAID 0/1)
[PCIe 2.0 x8]
RAID Controller (512 MB, RAID 0/1/5/6)
[PCIe 2.0 x8]
RAID Controller (1 GB,RAID 0/1/5/6)
[PCIe 2.0 x8]
RAID Controller (1 GB,RAID 0/1/5/6)
[PCIe 2.0 x8]
SAS Controller
[PCIe x8]
SAS Controller
[PCIe 2.0 x8]
Fibre Channel Controller
[PCIe 2.0 x8]
Fibre Channel Controller (2ch)
[PCIe 2.0 x8]
Dual Port 1000BASE-T Riser Card
[PCIe 2.0 x1]
1000BASE-T adapter
[PCIe 2.0 x1]
Dual Port 1000BASE-T Adapter
[PCIe 2.0 x1]
Quad Port 1000BASE-T Adapter
[PCIe 2.0 x4]
Dual Port 10GBASE SFP+ Riser Card
[PCIe 2.0 x8]
10GBASE adapter (SFP+/2ch)
[PCIe 2.0 x8]
Dual Port 10Gb Converged Network Adapter
[PCIe 2.0 x8]
#1A
x8
x8
-
Serial Port Adapter
Available in dual-processor configuration
To install a PCI card for more than 220 mm (8.66 in), N8116-28 full-length PCI installation kit is required.
Not available with Windows Server 2003 R2.
NEC Corporation
Revision 1.0, March 2012
36
CONFIGURATION GUIDE – NEC Express5800/R120d-2M
N8116-26 PCI-X Riser Card Kit
Part Number
N8103-149
N8103-150
N8103-151
N8103-160
N8103-104A
N8103-142
N8190-153
N8190-154
N8104-135
N8104-138
N8104-132
N8104-133
N8104-137
N8104-128
N8104-131
N8117-01A
1
2
3
Product Name
Slots

#1B
#2B
x8
64-bit
FH
FH
x16
3.3 V
312 2 312
-
#1C
x8
LP
x8
167
-
#2C
x4
LP
x8
167
-
#3C 1
x4
LP
x8
167
-
#1D
x8
x8
-

-
-
-
-
-
-

-
-
-
-
-
-
-

-
-


-
-

-



-
-

-



-
-

-
-


-
-

-
-
-

-
-
-
-
-
-
-

-

-



-
-

-

 3 
-
-

-



-
-
-
-
-
-
-

-

-
-
-

-
-

-
-
-

-
-
-
-



-
Slot # :
PCI Slot:
Card height:
Slot type:
Installable card length (mm) :
RAID Controller (512 MB, RAID 0/1)
[PCIe 2.0 x8]
RAID Controller (512 MB, RAID 0/1/5/6)
[PCIe 2.0 x8]
RAID Controller (1 GB,RAID 0/1/5/6)
[PCIe 2.0 x8]
RAID Controller (1 GB,RAID 0/1/5/6)
[PCIe 2.0 x8]
SAS Controller
[PCIe x8]
SAS Controller
[PCIe 2.0 x8]
Fibre Channel Controller
[PCIe 2.0 x8]
Fibre Channel Controller (2ch)
[PCIe 2.0 x8]
Dual Port 1000BASE-T Riser Card
[PCIe 2.0 x1]
1000BASE-T adapter
[PCIe 2.0 x1]
Dual Port 1000BASE-T Adapter
[PCIe 2.0 x1]
Quad Port 1000BASE-T Adapter
[PCIe 2.0 x4]
Dual Port 10GBASE SFP+ Riser Card
[PCIe 2.0 x8]
10GBASE adapter (SFP+/2ch)
[PCIe 2.0 x8]
Dual Port 10Gb Converged Network Adapter
[PCIe 2.0 x8]
#1A
x4
x8
-
Serial Port Adapter
Available in dual-processor configuration
To install a PCI card for more than 220 mm (8.66 in), N8116-28 full-length PCI installation kit is required.
Not available with Windows Server 2003 R2.
NEC Corporation
Revision 1.0, March 2012
37
CONFIGURATION GUIDE – NEC Express5800/R120d-2M
N8116-27 64-bit PCI Riser Card Kit
Part Number
N8103-149
N8103-150
N8103-151
N8103-160
N8103-104A
N8103-142
N8190-153
N8190-154
N8104-135
N8104-138
N8104-132
N8104-133
N8104-137
N8104-128
N8104-131
N8117-01A
1
2
3
Product Name
Slots

#1B
#2B
64-bit 64-bit
FH
FH
5V
5V
312 2 312
-
#1C
x8
LP
x8
167
-
#2C
x4
LP
x8
167
-
#3C 1
x4
LP
x8
167
-
#1D
x8
x8
-

-
-
-
-
-
-

-
-
-
-
-
-
-
-
-
-


-
-
-
-



-
-
-
-



-
-
-
-
-


-
-
-
-
-
-

-
-
-
-
-
-
-

-
-
-



-
-
-
-

 3 
-
-
-
-



-
-
-
-
-
-
-

-
-
-
-
-

-
-
-
-
-
-

-
-
-
-



-
Slot # :
PCI Slot:
Card height:
Slot type:
Installable card length (mm) :
RAID Controller (512 MB, RAID 0/1)
[PCIe 2.0 x8]
RAID Controller (512 MB, RAID 0/1/5/6)
[PCIe 2.0 x8]
RAID Controller (1 GB,RAID 0/1/5/6)
[PCIe 2.0 x8]
RAID Controller (1 GB,RAID 0/1/5/6)
[PCIe 2.0 x8]
SAS Controller
[PCIe x8]
SAS Controller
[PCIe 2.0 x8]
Fibre Channel Controller
[PCIe 2.0 x8]
Fibre Channel Controller (2ch)
[PCIe 2.0 x8]
Dual Port 1000BASE-T Riser Card
[PCIe 2.0 x1]
1000BASE-T adapter
[PCIe 2.0 x1]
Dual Port 1000BASE-T Adapter
[PCIe 2.0 x1]
Quad Port 1000BASE-T Adapter
[PCIe 2.0 x4]
Dual Port 10GBASE SFP+ Riser Card
[PCIe 2.0 x8]
10GBASE adapter (SFP+/2ch)
[PCIe 2.0 x8]
Dual Port 10Gb Converged Network Adapter
[PCIe 2.0 x8]
#1A
x4
x8
-
Serial Port Adapter
Available in dual-processor configuration
To install a PCI card for more than 220 mm (8.66 in), N8116-28 full-length PCI installation kit is required.
Not available with Windows Server 2003 R2.
NEC Corporation
Revision 1.0, March 2012
38
CONFIGURATION GUIDE – NEC Express5800/R120d-2M
Copyright Notice and Liability Disclaimer
The information contained herein is subject to change without notice.
Microsoft and Windows Server are either registered trademarks or trademarks of Microsoft Corporation in
the United States and/or other countries
Intel and Xeon are registered trademarks or trademarks of Intel Corporation or its subsidiaries in the United
States and other countries.
Linux is a trademark of Linus Torvalds.
Red Hat is a registered trademark of Red Hat, Inc. in the U.S.
All other products, brands, or trade names used in this document are trademarks or registered trademarks
of their respective holders.
NEC shall not be liable for technical or editorial errors or omissions contained herein.
For hard drive capacity measurements, 1 GB = 1 billion bytes. Actual formatted capacity is less.
NEC Corporation
Revision 1.0, March 2012
39
CONFIGURATION GUIDE – NEC Express5800/R120d-2M
Revision History
Revision
Date
Description
1.0
March 30, 2012
Initial release
NEC Corporation
Revision 1.0, March 2012
40
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising