Netgear EVA8000 User's Manual

Follow these steps to connect the Digital Entertainer HD:
1.
Connect the Digital Entertainer HD to your TV set and audio equipment. If you use a
digital audio/visual (a/v) receiver, use a S/PDIF coaxial or optical cable to connect it.
Digital Entertainer HD Model EVA8000
2.
Connect the Digital Entertainer HD to the router with an Ethernet cable.
Start Here
3.
Connect the Digital Entertainer HD power cord and plug it into an outlet.
)NSTALLATION'UIDE
The LED on the front of the Digital Entertainer HD lights up to show that it is
powered on.
This guide explains how to install the Digital Entertainer HD with:
• Basic setup
• Wired Ethernet LAN
• Video cable and audio cable included in the package, HDMI, or SCART
For custom set up, S-Video, or component video connections, see the NETGEAR Digital
Entertainer HD Model EVA8000 User Manual.
Install your Digital Entertainer HD in this order:
1.
Connect the Digital Entertainer HD.
2.
Set up the Digital Entertainer HD.
3.
Install software on your computer with the NETGEAR Resource CD.
4.
Configure your media library to work with the Digital Entertainer HD.
Connecting the Digital Entertainer HD
4.
1.
Turn on the TV.
2.
Set the video source selector on your TV to match the connection from your Digital
Entertainer HD. For example, if you used HDMI, set the TV to use “Digital HD” or
“HDMI” input.
3.
Check the TV display. If it is not clear, aim the remote control at the Digital
Entertainer HD, and push TV Mode. You can cycle through the TV modes to get the
best display. It can take 3 or 4 seconds for each TV mode change.
4.
As part of the initial setup, you are prompted to select a language.
5.
When you hear the audio welcome message, press OK.
If you do not hear the audio welcome message, check the connections to the Digital
Entertainer HD.
USB
port
stereo
audio
”¬Ä‰ÍjË7‰aj
.W?ÁÍ
-
Öa‰
ÖÍ
+ÝjÁ
2.
.¬jja
Choose Basic setup, and then set up the TV resolution.
You can use TV Mode to try out different TV resolution settings (see Step 3).
power
7.
.Ê+Ë
?މ?
‰~‰Í?Ë™ÍjÁÍ?‰™jÁËË7oååå
‰™Ê
0
Depending on where you bought your Digital Entertainer HD, you may be prompted
to enter your zip code.
.-
-jÄjÍ
®Ý‰Ája¯
:
.ˆ7‰aj
SCART
S-Video
HDMI
¬M
”¬™j™ÍË7‰aj
¬Á
.Ê+Ë#¬Í‰W?
®Ý‰ÁjjÄį
S/PDIF optical
(audio)
component
video
Ethernet port
with LEDs
If you want to receive news and weather, or to schedule TV recordings with the
electronic program guide, enter your zip code. Press the down arrow when you are
finished, and then press OK.
¤ååˆÔ|å7IyåˆÉåã±Ë¤±Ô˔?Þ±
Ë]ËË+:ÏåyÏåå多
Ë]Ë|åy|åyÏåå多Ë
1.
Power on your computer and log in as needed.
2.
Insert the NETGEAR Resource CD into the
CD drive on the computer.
Install the two AA batteries into the remote control that shipped with the product.
Follow these steps to set up the Digital Entertainer HD:
6.
S/PDIF
coaxial
(audio)
After connecting the Digital Entertainer HD and completing Basic setup, follow these
steps to install the software.
The Welcome page opens. If you do not
see the Welcome page, browse the files on
your CD, and then click Setup.
Setting up the Digital Entertainer HD
The figure below shows the rear view of the Digital Entertainer HD.
composite
video
Installing the NETGEAR Digital Entertainer for
Windows Software
±0±±ËÔ¤ÔÈÈo
8.
When prompted to install software, go to the computer where your media files are
stored.
3.
Select Install the NETGEAR Digital
Entertainer for Windows Software.
The Setup Wizard starts.
4.
Follow the Setup Wizard steps to accept
the licence and install the software.
5.
After the Setup Wizard steps are finished,
click Configure to use the Configuration
Wizard.
Configuring Your Media Library
Safety Information
Technical Support
Use the Configuration Wizard to set up your
media library to work with the Digital Entertainer
HD. Follow these steps:
Please read and follow this important information, especially those instructions related to
the risk of electric shock or injury to persons.
Thank you for selecting NETGEAR products. After completing the installation, register
your product at http://www.NETGEAR.com/register. For product updates and Web support
go to http://kbserver.netgear.com/products.
1.
Warning: To reduce the risk of electric shock, do not remove the cover. There
are no user serviceable parts inside.
Click Next to begin.
The Configuration Wizard prompts you to
select media folders to be shared. This will
allow the Digital Entertainer HD to access
these files.
2.
Warning: This device can display static images, which can cause “burn in” of
certain displays. Avoid leaving static images (such as photos or
paused videos) onscreen for long periods of time.
Browse and select the folders that you want,
and then click Next.
The Configuration Wizard is ready to configure your Digital Entertainer HD and
displays this screen:
Warning: There are no user serviceable fuses. To avoid fire hazard, use only
the specified fuse(s) with the correct type number, voltage, and
current ratings as referenced in the service instructions or on the
equipment. Fuses should be replaced only by qualified service
personnel.
Warning: This device should be used only indoors in well-ventilated areas.
To reduce the risk of fire, electric shock, or interference, do not
expose this appliance to moisture or rain and use only the
recommended accessories.
3.
For some firewalls, specific ports must be opened so that the Digital Entertainer HD
can access media files on your computer. If prompted, select Allow or Unblock to
allow the access.
4.
Click Next, and follow the onscreen instructions to select your media folders.
5.
When you are finished, go to your TV.
Your Digital Entertainer HD is ready to use. The Main Menu is displayed. For
information about using the Digital Entertainer HD, see the NETGEAR Digital
Entertainer HD Model EVA8000 User Manual.
January 26, 2007
This symbol was placed in accordance with the European Union Directive
2002/96 on the Waste Electrical and Electronic Equipment (the WEEE
Directive). If disposed of within the European Union, this product should be
treated and recycled in accordance with the laws of your jurisdiction
implementing the WEEE Directive.
© 2006 by NETGEAR, Inc. All rights reserved. NETGEAR is a registered trademark of NETGEAR, Inc. in the
United States and/or other countries. Other brand and product names are trademarks or registered trademarks of
their respective holders. Information is subject to change without notice.