2100 Series Two Pole Voltage Tester

2100 Series Two Pole Voltage Tester
www.beha-amprobe.com
2100 Series
Two Pole Voltage Tester
2100-Alpha, 2100-Beta
The Beha-Amprobe 2100-Alpha and 2100-Beta are rugged, easy-touse two pole voltage testers for voltage and continuity checks. Built
tough for use in industrial and commercial environments, the 2100
Series measures voltage range up to 690 V AC/DC and is safety rated
to CAT IV 600 V / CAT III 690 V. They are also built according to latest
voltage tester standard EN 61243-3:2010 and are GS approved.
Both offer voltage test by LED, phase rotation test, switchable
load by two push buttons, single pole phase test and continuity.
The 2100 series also offers a torch function for working in dark
environments and has an ingress protection rating of IP 64.
The voltage tester 2100-Beta offers dual display for voltage test with
an LED and LCD display.
• Switchable load of 140 W with two push buttons
• Voltage Test
- Display by LEDs 12…690 V AC/DC
- Display by LCD 12…690 V AC/DC
(2100-Beta only)
2100-Alpha
2100-Beta
• Audible indication when detected voltages above
50 V AC and 120 V DC
• Two pole phase rotation indication
• Test of 30 mA RCD by push buttons
• Continuity test with visual (LED) and radio indication
• GS approved, built according to EN 61234-3:2010
• Robust, double isolated cable with wear indication
• 4 mm probe extensions for easy, ergonomic
measurement in sockets
• Automatic AC/DC voltage detection, indication
of polarity
• Single pole test for phase polarity
• Work light for dark environment
• IP 64 splash and dust proof
• Protective probe caps for reducing the risk of injury
• Quick single hand test on mains socket with 19mm
contact distance
• Safety rated CAT IV 600 V, CAT III 690 V
2100 SERIES Specifications
Feature
2100-Alpha / 2100-Beta
Voltage test (AC/DC)
12, 24, 50, 120, 230, 400, 690 V
Frequency
16 2/3 Hz to 70 Hz
Continuity
0 Ω to 500 kΩ
Phase rotation indication
330 V to 450 V AC (47 Hz to 63 Hz)
Single pole phase test
100 V to 690 V AC (40 Hz to 70 Hz)
Switchable load
140 W at 690 V
Voltage detection
Automatic
Polarity detection
Full range
RDC trip (30 mA)
Yes
Work light
Yes
Accessories
Users manual, GS 38 caps, batteries (installed), carrying case sold separately (CC-VP-7XX 3889931)
For more detailed specifications see users manual.
©2014 Beha-Amprobe. All rights reserved.
For detailed specifications and ordering info go to www.beha-amprobe.com
6002202 A
www.beha-amprobe.com
2100 SERIES Detailed Specifications
Specifications
2100-Alpha
2100-Beta
Display
LED
LED and LCD
LED voltage range
12 V...690 V AC/DC
LED indicator
±12, ±24, 50, 120, 230, 400, 690 V
Tolerances LEDs
As in EN 61243-3:2010
LCD voltage range
N/A
12 V...690V AC/DC
LCD display resolution
N/A
1V
Tolerances of LCD display
N/A
± (3% rdg + 3 LSD)
Frequency range
DC, 16 2/3 Hz to 70 Hz
Acoustic indication
>50 V AC, >120 V DC; 50 Hz sound pattern
Voltage detection
Automatic
Polarity detection
Full range
Range detection
Automatic
Response time
LED < 0.1s
Automatic load (RCD)
Yes
Internal load
Approximately 2.4 W at 690 V (load buttons not pressed)
Current Is
<3.5 mA at 690 V (load buttons not pressed)
Connectable load
Approximately 140 W at 690 V
Test current connectable load
<200 mA
Operation time (DT)
30s
Recovery time
240s
Automatic power on
>12 V (press load buttons)
>24 V (w/o load buttons)
LED < 0.1s, LCD < 1s
LEDs: >12 V (press load buttons)
>24 V (w/o load buttons)
LCD: >12 V
Single Pole Phase Test
Voltage range
100 V to 690 V against Earth
Frequency range
40 Hz to 70 Hz
Continuity Test
Range
0 to 500 kΩ
Tolerance
0% to +50% (as in 61243-3:2010)
Test current
<5μA
Overvoltage protection
690 V AC/DC
Rotary Field Detection
Voltage range
330 to 450 V against Earth
Frequency range
47 HZ to 63 Hz
General Specifications
Operating storage
temperature
-15°C to +55°C, max. 95% RH
Operating altitude
Up to 2000 m
Measurement category
CAT IV 600 V, CAT III 690 V
Pollution degree
2
IP protection
IP 64
Safety regulations
EN 61243-3:2010
Agency approval
GS from TÜV Rheinland, CE
Power supply
2x 1.5V (AAA / IEC LR03)
Battery lifetime
Over 10000 measurements (<5s / per measurement)
Dimensions (HxWxD)
Approximately 280 x 78 x 35 mm (11.0 x 3.1 x 1.4 in)
Weight
Approximately 320 g (0.71 lb)
For complete specifications please download the product datasheet and the users manual on www.beha-amprobe.com.
Beha-Amprobe®
In den Engematten 14,
79286 Glottertal, Germany
Tel.: +49 (0) 7684 8009 - 0
©2014 Beha-Amprobe. All rights reserved.
For detailed specifications and ordering info go to www.beha-amprobe.com
6002202 A
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement