NextBase TV700 User's Manual

NextBase TV700 User's Manual
MODEL NO.
HI-SPEED TV700
OPERATING INSTRUCTIONS
D ig ital V ideo
B roadcasting
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
Re ceive r
IMPORTANT SAFETY INSTRUCTIONS
ENG 01
Thank you for purchasing this HI-SPEED TV700 tablet digital / analog TV.
Please read this manual carefully before operating your unit and keep it
handy for future reference. It will be helpful to you if you encounter any
operational problem .
IMPORTANT SAFETY INSTRUCTIONS
1.
2.
3.
4.
5.
6.
7.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this unit near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the
,
manufacture s instructions.
8. Do not install the unit near any heat sources such as radiators, heat registers,
stoves, or other apparatus including amplifiers that produce heat.
9. Position the cables well so that they cannot be walked on or pinched by items
placed on or against them.
10.Do not dispose of the unit into fire, to prevent the danger of explosion.
11.Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way.
12 .Only the original AC-DC adapter can be used.
13.Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third
prong are provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
14.Unplug this apparatus during lightning storms or when unused for long periods
of time.
15.Do not expose this appliance to rain or moisture, dripping or splashing and that
no objects filled with liquids, such as vases, or naked flame sources, such as
candles, shall be placed on the unit.
WARN ING :
*Please note that this unit may not receive analog TV signal well if using in a moving
vehicle.
*Do not touch the antenna with your hands while scanning the TV channel. Doing
so would lower down the receiving quality.
CA UTIO N:
Do not take the unit apart. No user serviceable parts inside. Do not perform any
servicing other than contained in this operating instructions unless you are qualified
to do so. These servicing instructions are for use by qualified service personnel only.
MOBILE ENTERTAINMENT
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
02 ENG
IMPORTANT SAFETY INSTRUCTIONS
N OT ICE S:
1. Fully charge the Ni-MH battery before using it for the first time or reusing it after
being stored for a long period. It would need 3 to 5 circles of charging and
discharging operations to get the optimum performance of the battery.
2. The surrounding temperature has much to do with the charging efficiency and
should be between 0 C and 40 C. The charging performance will be in the most
efficient state from 10 C to 30 C.
O
O
O
O
3. It is suggested to carry out the actions of charging and discharging the battery
at least every one or two months if the battery is stored for a long time. Fully
recharge it again to be stored. This action can avoid the leakage or the bad
performance of the battery for its self-discharging action.
MOBILE ENTERTAINMENT
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
CONTENTS
ENG 03
IMPORTANT SAFETY
INSTRUCTIONS
USING THE USB PORT.........................17
IMPORTANT SAFETY
INSTRUCTIONS.......................................1
DTV MENU
GENERAL STEPS OF SETUP...............19
PACKAGE CONTENTS
DTV CHANNEL
PACKAGE CONTENTS ......................... 4
PARTS IDENTIFICATION
MAIN UNIT............................................... 5
MAIN UNIT CONTROL SECTION........... 5
MAIN UNIT LEFT SIDE............................6
MAIN UNIT RIGHT PANEL.......................7
MAIN UNIT REAR SIDE...........................8
HOW TO STAND......................................8
REMOTE CONTROL............................... 9
KEY DESCRIPTION
OF REMOTE CONTROL........................10
NOTES ON USING THE
REMOTE CONTROL UNIT......................11
REPLACING THE BATTERY...................11
ATV CHANNEL
ATV OPERATIONS.................................13
NOTICES................................................13
DTV PARTS IDENTIFICATION
SPECIAL KEYS......................................14
USB PLAYBACK
OPERATIONS
TV CHANNELS
AND RADIO CHANNELS .......... ............ 20
FAVORITE..............................................20
DELETE..................................................21
MOVE.....................................................22
LOCK.................... ..................................22
DTV CONFIGURATION
SYSTEM SETTING................................24
AUTO SCAN...........................................29
MANUAL SCAN.....................................29
GAME
BOXMAN................................................30
BURNING TETRIS.................................30
HIT RAT..................................................31
OTHERS
DIMENSION AND PARAMETER............32
TECHNICAL INFORMATION
TROUBLE SHOOTING..........................33
MOBILE ENTERTAINMENT
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
04 ENG
PACKAGE CONTENTS
P A CKAG E C ONT EN T S
After unpacking, first check that all the accessories listed below are included:
A C / D C ad apt e r
Au d io a n d vi d eo ca b les
S OURCE
MENU
FAV-
AUTO
SCAN
CH
OK
MAN UA L
S CA N
INFO
FAV+
DT V/
RADIO
TTX
GAME
CH
EXIT
EPG
AUDIO
1
2
3
L/R
4
5
6
MUTE
7
8
9
ZOOM
Pre-CH
0
F1
F2
P/N
F3
F4
SR1O
CAT V ca ble
Remo te control
M OD E L N O.
HI-SPEED TV700
OP ERATING INSTRUCTIONS
Di g i tal V i d eo
B ro a dc as ti ng
Rec eiver
Operati ng manual
Exte ndib le Antenna
Mini-ma gnetic Antenn a
Car p ower cabl e
Car ba g
NOTES:Actual products' appearance might vary slightly from the pictures shown.
MOBILE ENTERTAINMENT
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
PARTS IDENTIFICATION
ENG 05
M AI N U NIT
1
2
3
4
1.Liquid crystal display
2.Speakers
3.Control section
Control buttons.
4.Remote control sensor
The remote control signals are received from here.
M AI N U NIT CO NT R OL SEC TIO N
SCAN
MOBILE ENTERTAINMENT
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
06 ENG
PARTS IDENTIFICATION
1.POWER ON/OFF butto n
Hold it for about 3 seconds to power on or turn off the unit (Standby status).
2.MODE button
Use the +/- key to adjust the display mode.
CONTRAST: Level 0 to 8.
BRIGHTNESS: Level 0 to 8.
SATURATION: Level 0 to 8.
SCREEN SIZE: Switch screen
between 16:9 and 4:3.
Obverse
DISPLAY MODE: Switch screen between
reverse and observe.
OSD languages: English, French, German, Spanish and Italian.
OSD Timeout : Level 10 to 60.
Transparency: Level 0 to 7.
Reverse
3.- / + bu tton
Press them to adjust the display MODE.
4.TV /AV IN butto n
Press it to choose TV /AV IN .
Note: Please choose DVB-T or ATV by using the DVB-T/ATV switch on the
left side.
5.CH- / C H+ button
Press these two buttons respectively to channel down/up.
Press them simultaneously to go to the AUTO SCAN.
M AI N U NIT LE F T S IDE
USB
Di gita l V ideo
Br oadca sting
1
2
R ecei ver
3
1. DVB-T/ATV switch: Choose DVB-T or ATV.
2. CATV Jack: Cable TV type aerial input.
3. USB Port: Support USB 1.1.
MOBILE ENTERTAINMENT
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
PARTS IDENTIFICATION
ENG 07
M AI N U NIT RIG HT PA NEL
1
2
3
4
5
6
7
8
1.DC IN
Connect the included AC adapter here.
2.PO WER ON LE D INDIC ATOR
The LED will be green when the unit is on.
3.RE CHARG E LED INDICATOR
The LED will be red when the battery is recharging and will be off in
non-recharging state.
4.AU DIO IN/OUT JACK
Input or output audio signals to the connected device by setting the AV IN/OUT
mode value.
The included AV cable is connected here.
5.VIDEO IN/OUT JACK
Input or output video signals to the connected device by setting AV IN/OUT mode
value.
The included AV cable is connected here.
6.EA RPHON E JACK
For connecting a stereo earphone or an amplifier.
7.DC OU T
DC OUTPUT.
8.VO LUME CONTRO L
Use it to adjust the volume of the speakers or the earphone.
MOBILE ENTERTAINMENT
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
08 ENG
PARTS IDENTIFICATION
MAI N U NIT RE AR SIDE
2
1
1. Sup port
The unit can stand with this device.
2. Ant enna
jack
Connect to the antenna.
H OW TO ST AND
1. Pull out the support.
2. Draw out the support to a proper position .
3. Push down the button to lock it.
UN LO C K
LO CK
UNLO CK
LO CK
MOBILE ENTERTAINMENT
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
PARTS IDENTIFICATION
ENG 09
R EMOTE CO NT R OL
(1 0)
(11)
(1)
SOURCE
AUTO
SCAN
MANUAL
SCAN
DTV /
RADIO
(1 2)
(1 3)
(2)
MENU
(3)
(4)
FAV-
CH
OK
INFO
FAV+
TTX
(1 4)
GAME
(1 5)
(1 6)
AUDIO
(1 7)
(5)
(6)
CH
EXIT
EPG
(7)
(8)
(9)
(1 8)
1
2
3
L/R
(1 9)
4
5
6
MUTE
(2 0)
7
8
9
ZOOM
(2 1)
Pre-CH
0
P/N
(2 2)
(2 3)
(24)
(2 7)
F1
(25)
F2
F3
F4
SR1O
(2 6)
MOBILE ENTERTAINMENT
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
10 ENG
PARTS IDENTIFICATION
KE Y DE SC RIP TIO N O F R EMOTE CO NT R OL
1. SOURCE
Press it to choose the DVB-T
/ATV /AV IN.
2. MENU
Press it to show the menu.
3. CH+/UP
Press it to change channels up
or move the cursor up.
4. FAVSwitch to previous favorite
program.
5. FAV+
Switch to next favorite
program.
6. EXIT
Exit from the current item.
7. CH-/DOWN
Press it to change channels down
or move the cursor down.
8. DIGITS
Number keys.
9. Pre-CH
Jump back to the previous
channel.
10.AUTO SCAN
Automatic search.
11.MANUAL SCAN
Manual search.
12.DTV/RADIO
Choose TV program or radio
program.
13.INFO
To display program information.
14.TTX
Show the teletext information.
15.OK
Confirm the selection action.
16.GAME
Press it to go to the game interface
in DVB-T state.
17.AUDIO
Multi-track selection.
18.EPG
Electronic Program Guide.
19.L/R
Switch the audio channels.
20.MUTE
Audio mute on/off.
21.ZOOM
Zoom the picture on the screen
with the sequence of ZOOM 2,
3, 4,1/2,1/3,1/4 and OFF.
22.P/N
Output the TV type.
23.-/-Press this button to select channel
numbers of one figure or double digits.
24.F1(Red button)
Delete channels in TV channel state.
(During USB files playback: Play or
pause playback key.)
25.F2(Green button)
Set any channels to be your favorite
in TV channel state.
(During USB files playback: Stop
playback key.)
26.F3(Yellow button)
Move a channel to the appointed
place to rearrange the order of all the
channels in TV channel state.
(During USB files playback: Fast
backward key.)
27.F4(Blue button)
Lock the channel as you wish with a
password in TV channel state.
(During USB files playback: Fast
forward key.)
MOBILE ENTERTAINMENT
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
PARTS IDENTIFICATION
ENG 11
N OT ES O N U SI NG T HE RE MO T E C ON TR OL U NIT
Do not drop or step on the remote control unit or subject it to shocks.
Note that the remote control unit may not work if there are obstacles between
it and the remote sensor.
Do not expose the remote sensor to strong light. Doing so may make operation
impossible.
Use the remote control unit within the specified operating range.
R EP L AC ING TH E B ATT ERY
1.Insert your finger nails into A and
B on the diagram below. Press A
according to the direction, then
pull out the battery holder.
the battery holder back to its
3. Fit
place.
A
B
NOTE:
the old battery, then
2. Remove
insert the new battery into the
battery holder with the + side
facing upwards.
CR2025
Lithium battery (CR2025)
To prevent leakage of fluid from the
lithium battery, remove the battery
when not using the remote control unit
for long periods of time (One month or
more). If the battery leaks fluid,
carefully wipe it out of the battery
case, then change to a new lithium
battery.
Caution: The battery may present a
risk of fire if mistreated. Do not
recharge, disassemble, heat above
100 C. Replace battery with same
type.
Dispose of used battery properly,
keep away from children and do not
dispose of in fire.
MOBILE ENTERTAINMENT
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
12 ENG
ATV CHANNEL
Press the Menu button on the rem ote control to bring up the main m enu. There are
six items in the menu: Program, Auto Scan, Fine, Skip, Color and Sound. Please use the
and OK buttons to operate the desired item.
MAIN MENU
PR OGRAM
AU TO S CAN
PR OGRAM S KIP
FING TUN E
COL OR
SOU ND
0
OFF
0
PAL
B/G
P ROGR AM
Show the current channel number found.
AU TO SCAN
Scan all the ATV channels and store them automatically.
P ROGR A M S KIP
Shield the current channel by choosing ON. There are two options for your choice :
OFF/ON.
The default is OFF.
F INE TU NE
Adjust the program conditions.
C OL OR
There are totally two groups of color systems complied with the local condition for
ATV. The either-or system groups are as follows:
1 ) PAL and NTSC.
2 ) PAL and SECAM.
PAL is the default for both system groups.
S OU ND
According to the color system of ATV, select your preferred sound systems:
1) PAL and NTSC.
PAL: D/K, B/G,M/N and I.
NTSC.
2) PAL and SECAM.
PAL: D/K, B/G and I.
SECAM: D/K, B/G and L.
MOBILE ENTERTAINMENT
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
ATV CHANNEL
ENG 13
AT V O PER AT ION S
1. Turn on the unit and press the TV / AV IN button to choose the TV mode.
2. Push the DVB-T / ATV switch to choose the ATV antenna setting.
3. The CATV signal will be inputted automatically when the CATV cable is plugged in.
4. Press the AUTO SCAN button to automatically scan ATV channels. All the channels
found will be stored.
5. Press the CH+ button or the CH- button to get the channels you want.
NO TIC ES
1. Make sure this device's ATV system is matched with the territory's situation.
2. Please receive ATV signal with the Extendible Antenna, if using the unit out of doors.
3. In order to receive clearer image, please adjust the length, angle and direction
of the extendible antenna properly.
MOBILE ENTERTAINMENT
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
14 ENG
DTV PARTS IDENTIFICATION
S PEC IAL KE YS
EPG (Electronic Program Guide)
A quick program guide that the user can easily move up/down to view the
brief description of the selected program.
Press the EXIT button or the EPG button again to exit from this interface.
Electronic Program Guide
Video
08 /08/2 005
13 :00
14:00
15:00
A
Program List
Program
Description
B
C
If the current channel is scrambled, the prompt message "scrambled
channel." will appear on the screen.
Scrambled channel.
L/R
Press this button to change the audio channels at non-menu status.
Stereo
Left
S tere o
Right
MOBILE ENTERTAINMENT
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
DTV PARTS IDENTIFICATION
ENG 15
MANUAL SCAN
Perform program scanning. (Found programs will be appended to the program list.)
Manual Scan
S can Ty pe
Sc an Type
Singl e Sc an
St art Freq
170000KHz
End Fr eq
890000KHz
Band Widt h
6MHz
St art Scan
Pres s O K
Use FAV+/- t o select or Pr es s OK to view list
Press EXIT t o return
Scan Complet e
Channel
1 CH
F requenc y 170000KHz
Progres s
St rength
0
Quality
0
1/1
T V : 0000
RA DIO : 0000
No TV pro gra m
No radio program
Press OK t o exit
Press EXIT t o return
The re are 4 item s:
Scan Type: Range Scan and Single Scan.
Start Freq: Input the start frequency of your preferred scan range.
End Freq: Input the end frequency of your preferred scan range.
Band Width: 6MHz, 7MHz and 8MHz.
You can use
buttons to select the options with your actual need.
Press OK to start scanning.
NOTE:
If Single Scan is your selection, you cannot edit the End Freq but only the Start
Freq as the appointed scanning frequency.
MOBILE ENTERTAINMENT
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
16 ENG
DTV PARTS IDENTIFICATION
INFO
Press this button to bring forth the primary program information.
TV
0001
Sig nal
14 :29:08
GD 1
St ere o
L ang uag e 1 /1
8 8%
Press this button twice to bring forth the particular program information, and press it
again to exit from this interface .
Program Info
Pro g Na me
Pro g NO .
Lock
Band Width
Hi er arc hy
Tra ns mission
St rengt h
Quality
GD 1
00 1
NO
N/ A
N/ A
N/ A
90 %
88 %
Frequenc y
Modulation
Guard Interva l
HP C od e Rate
LP Cod e Rat e
N/ A
N/ A
N/ A
N/ A
N/ A
AUDIO
Audio channel information displays.
La ng ua ge 1 /1
MOBILE ENTERTAINMENT
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
USB PLAYBACK OPERATIONS
ENG 17
U SIN G T HE U SB PO RT
Only in the DTV status can the USB device be read MP3, JPG, BMP and MPEG
files stored on a USB device can be played via the USB port on the left side of the
unit.
1. If there are both TV and an USB device connected before the unit power on,
there will be a prompt message shown on screen, you can use the remote
control to select media by pressing
and OK keys.
2. If TV is playing prior to the USB device connecting, there will be a prompt
message shown on screen to ask to select media.
D IGI TAL
3. During playback of MP3 and MPEG and stop mode of JPG and BMP files ,the
following screen will appear:
a
b
c
Mp3
a.
MP3 ICON
b.
JPG and BMP ICON
C.
MPEG ICON
MOBILE ENTERTAINMENT
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
18 ENG
USB PLAYBACK OPERATIONS
USE
keys to move the cursor to a folder, a file ,MP3 ICON,
JPEG ICON or MPEG ICON.
Press OK to enter the folder or play the file highlighted.
While viewing JPG and BMP files. Press
picture respectively.
keys will rotate or flip
During USB files playback, you can control the playback by pressing
keys.
4. If there is an USB device connected, you can enter the select media interface
by pressing the EXIT button during playback of USB or TV.
NOTE:
1. The unit may not work properly it using USB connecting cable. Suggested
not to use it.
2. Support USB 1.1 .
3. The USB function cannot be available at ATV or AV IN station.
MOBILE ENTERTAINMENT
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
DTV MENU
ENG 19
GENERAL ST EP S OF SETUP
1.Press the MENU key on the remote control to bring up “main menu”.
There are three classifications: DTV Channel, Configuration and Game .
DTV Ch annel
TV C ha nnel s
Radi o Cha n ne ls
Pro gra m G ui de
USB
2.Press and buttons to highlight the icon of the desired page, then press the
Down or Up button to activate that page.
GAME
Bo xM an
Bu rnin g Tet ris
Hit R at
3.Press
and buttons to highlight the desired option. Press OK to select.
GAME
Bo xM an
Bu rnin g Tet ris
Hit R at
4.You can press SETUP or EXIT again to exit MENU.
MOBILE ENTERTAINMENT
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
20 ENG
DTV CHANNEL
19
TV CH A NNEL S AND RADIO C HA NNELS
There are two different kinds of channels: TV Channels and Radio Channels.
You can manage the current channels by labeling your favorites, deleting the
non-favorites, moving the program 's order and locking the channels. The default
is FAVORITE.If there are no programs saved in the database when entering TV
Channels or Radio Channels, the prompt message “No TV channels." or "No
radio channels.” will pop out and disappear within several seconds.
DTV Chan nel
TV C han n el s
Ra d io C han nel s
Pr og ra m G ui d e
US B
F AV OR ITE
If you often watch some specific programs and wish to get to these programs
quickly, you can label these to be your favorites through the program
management actions. You can enter the FAVORITE interface by pressing the F2
button on the remote control at the program management menu status. Exit after
finishing the favorite programs selection action, you can use the remote control
to select your favorite program conveniently.
TV C HA NN EL S
FAVORITE
001 A
002 B
003 C
Pres s OK t o se lect
D EL
FA V
M OVE
LOC K
MOBILE ENTERTAINMENT
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
DTV CHANNEL
You can use and
status.
ENG 21
buttons to select any programs at FAVORITE management
If the selected program is not labeled with the FAVORITE symbol, you can set it as
your favorite program by pressing the OK button and the FAVORITE symbol will
appear behind the program name.
If the selected program has already been labeled, press the OK button to cancel the
symbol.
You can set multi-program to be your favorites at the same time.
DELETE
If you don't like some specific programs, you can label these to be DEL programs
through the program management actions. You can enter the DELETE interface
by pressing the F1(Red) button on the remote control at program management
menu status.
TV C HA NN EL S
FAV OR IT E
A
002 B
003 C
Pres s OK t o se lect
D EL
You can use and
FA V
M OVE
LOC K
buttons to select any programs at DELETE management status.
If the selected program is not labeled with the DELETE symbol, you can set it as the
DEL program by pressing the OK button and the DELETE symbol will substitute the
original program serial number.
If the selected program has already been labeled, press the OK button to resume the
original program serial number.
You can set multi-program to be DEL programs at the same time.
MOBILE ENTERTAINMENT
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
22 ENG
DTV CHANNEL
MOVE
If you want to rearrange the program's order, you can carry out the actions through
the program management actions. You can enter the MOVE interface by pressing
the F3 button on the remote control at program management menu status.
TV C HA NN EL S
MOV E
A
002 B
003 C
Pres s OK t o se lect
D EL
FA V
M OVE
LOC K
You can use and buttons to select one program when at MOVE management
status and press the OK button to label them. Then the MOVE icon will substitute
the program serial number. You can press the OK button again to cancel the
proceeding.
After choosing the to-be-moved program, you can use the or button to choose the
position where you want to move the selected program to and confirm it by pressing
the OK button. The selected program will be moved and all the serial numbers of the
programs will be renewed accordingly.
When finishing the action, the MOVE symbol will disappear.
You can move the program serial number as much as you wish to get the complete
satisfactory program order.
LOCK
If you don't want your children to get to some specific programs, you can lock
these programs by an appointed password. You can enter the LOCK interface
by pressing the F4(Blue) button on the remote control at program management
menu status.
MOBILE ENTERTAINMENT
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
DTV CHANNEL
ENG 23
TV C HA NN ELS
M OVE
A
002 B
003 C
No or bad signal!
Passw or d
Press OK t o se lect
D EL
FAV
M OVE
LOC K
M OVE
LOC K
TV C HA NN ELS
LOCK
001 A
002 B
003 C
Press OK t o se lect
D EL
FAV
Before entering the program management menu, you have to input the right
password. The default is 0000. If you want to change the password, please refer
to "Password". If you forget the password, always use 0000 to unlock.
You can use and buttons to select any programs at LOCK management status
and press the OK button to label them.
If the selected program is not labeled with the LOCK symbol, you can lock it by
pressing the OK button and the LOCK symbol will appear behind the program name.
If the selected program has already been labeled, press the OK button again to
cancel the symbol.
The locked program can be watched in the LOCK program management menu.
However, you have to enter the password to watch the locked program in any
other states.
MOBILE ENTERTAINMENT
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
24 ENG
DTV CONFIGURATION
Choose “Configuration” item and you will see that there are three options for
selecting:
System Setting, Auto Scan and Manual Scan.
C onf ig uration
S yst em Set t in g
A ut o Sca n
Ma nual Sca n
S YST EM SET TIN G
Use and buttons to select your need. Then press OK key to bring forth all the
options for selecting.
OSD LANGUAGE
Seven available OSD languages:
English
Deutsc h
Espan ol
Francais
Por tug ues
Italian o
Neder lands
C onf ig uration
S yst em Set t in g
A ut o Sca n
Ma nual Sca n
OSD L ang uage
Scree n Fo rm a t
TV T ype
Sta rt Ch anne l
Set ScanA rea
Acti ve An te nna
Passw ord
Def aul t
Eng li sh
Deu ts ch
Espa nol
F r anca is
Port ugu es
^
I t al ia no
Ned er l and s
The default is English.
SCREEN FORMAT
Choose the right screen format depending on your equipment. Three options for
choosing:
MOBILE ENTERTAINMENT
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
DTV CONFIGURATION
ENG 25
4:3 PS (Pan & Scan)
4:3 LB (Lette r Box)
16:9 (Wide Screen)
Configuration
Syst em Se tt i ng
Aut o Sc an
Ma nua l Sca n
OS D Lan guag e
Scree n F orm at
T V Type
Sta rt C hann el
Set Scan Area
Act ive A nt enna
Passw ord
Def aul t
4: 3PS
4: 3LB
16: 9
NOTE:
If the screen format is incorrectly set, the images on the screen might
be distorted or clipped out. Therefore, adjust the screen format wisely
in order to get the perfect video display.
The default is 4:3PS.
TV Type
Select the TV type. (Auto means the output signal format will be changed
automatically according to the received signal.)
NTSC
PAL60
PAL
Configuration
Syst em Se tt i ng
Aut o Sc an
Ma nua l Sca n
AUTO
OS D Lan guag e
Scree n F orm at
T V Type
Sta rt C hann el
Set Scan Area
Act ive A nt enna
Passw ord
Def aul t
NT SC
PAL 60
PAL
AU TO
The default is AUTO.
Start Channel
If you want to watch the same channel each time the unit is turned on, you can
set the First Channel here.
Configuration
Syst em Se tt i ng
Aut o Sc an
Ma nua l Sca n
OS D Lan guag e
Scree n F orm at
T V Type
Sta rt C hann el
Set Scan Area
Act ive A nt enna
Passw ord
Def aul t
MOBILE ENTERTAINMENT
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
26 ENG
DTV CONFIGURATION
After pressing OK in the Start Channel state, the following picture will appear:
M essage Box
Enable/Disable
St art Channel S ett ing
YES
NO
Choose “YES” to show all the channels for selecting or “NO” to exit.
Choos e Program
01 A
02 B
03 C
04 D
You have to select one of them to be the First Channel when the unit is turned
on. The default is NO.
The selection action will be saved and become effective when turning on the
unit next time.
The First Channel will be closed automatically if the selected channel is
deleted after the next scanning.
The First Channel will remain to be the same channel even when the First
Channel is moved.
If there is no selected First Channel, the last-playing channel will become the
First Channel when turning on the unit next time.
MOBILE ENTERTAINMENT
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
DTV CONFIGURATION
ENG 27
SET SCAN AREA
Select the proper region according to the place you are located. After setting,
press the AUTO SCAN key to scan the channels going on this region premise.
Germa ny
Englan d
Italy
France
Spain
Hollan d
Taiwan
China
Norwa y
Swede n
Finlan d
Por tug al
Others
C onf ig uration
S yst em Se tt in g
A ut o Sca n
Ma n ual S ca n
O SD L angu age
Sc re en Form at
TV T ype
St art Cha nne l
Se t S canA rea
Ac ti ve An te nna
Pa ssw or d
D ef aul t
Ge rm an y
Eng lan d
I t al y
F rance
Spa in
Hol la nd
Taiwan
ACTIVE ANTENNA
This funtion will help the unit get a better TV signal with the active antenna turned on.
C onf ig uration
S yst em Se tt in g
A ut o Sca n
Ma n ual S ca n
O SD L angu age
Sc re en Form at
TV T ype
St art Cha nne l
Se t S canA rea
Ac ti ve An te nna
Pa ssw or d
D ef aul t
ON
OF F
The default is ON.
PASSWORD
Renew your password here.
C onf ig uration
S yst em Se tt in g
A ut o Sca n
Ma n ual S ca n
O SD L angu age
Sc re en Form at
TV T ype
St art Cha nne l
Se t S canA rea
Ac ti ve An te nna
Pa ssw or d
D ef aul t
MOBILE ENTERTAINMENT
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
28 ENG
DTV CONFIGURATION
1.Input your old password first.
Old p ass w ord :
2.Enter the new password.
New passw ord :
*
3.Confirm your new password.
Confi rm :
*
NOTE:
1. If the confirmed password differs from the new password, you have to reenter
them until the two are the same.
2. The default password is 0000.
DEFAULT
Resume the factory settings.
Con figuration
Sys te m Se tt i ng
Aut o S can
Ma nua l Sca n
OS D Lan guag e
Scree n F orm at
T V Typ e
St art C hann el
Set Scan Area
Act iv e A nt enn a
Pass word
Def au lt
MOBILE ENTERTAINMENT
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
DTV CONFIGURATION
ENG 29
After pressing OK in the Default state, the following picture will appear:
Me ss age B ox
Reset to defau lt !
OK
Canc el
NOTE:
The default settings action will resume all the factory settings, including the
deletion of all the saved programs.
A UT O S CAN
Auto scanning.
Scann ing .. .
C hannel
58
F requenc y 740000KHz
Progres s
St rength
28
Quality
0
45/ 57
T V : 0000
RADIO : 0000
Pres s
t o stop sc an
Pres s EX IT t o st op and e xit
NOTE:
Press F1(Red) to stop scanning and EXIT button to exit.
M AN UA L S CAN
Please refer to Special Keys.(Page 14)
MOBILE ENTERTAINMENT
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
30 ENG
GAME
Get to the game function from the main menu. You will find three kinds of games
in DTV state.
GAME
Bo xM an
Bu rn in g T et ri s
Hi t R at
B OX MA N
Use ,
,
and
buttons to control the little man to move the boxes to the
appointed place. Only one box can be moved at a time.
S T E P 0 00 L EV E L 1
Press the MENU key to replay the current game and the OK key to play the
higher level.
Press EXIT to quit at any time.
B UR N IN G T ETR IS
1. Use and to move Tetris left and right.
2. Press to shift the direction of the Tetris.
3. Press to accelerate the Tetris downwards.
MOBILE ENTERTAINMENT
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
GAME
ENG 31
LE VE L
1
S COR E 0000
Press the MENU key to replay the current game and the OK key to pause/play
the higher level.
Press EXIT to quit at any time.
HIT RA T
Press 1,2,3,4,5,6,7,8,9 to hit the rat according to its corresponding directions of
where it appears on the screen.
Press EXIT to quit at any time.
S CO RE
00
L E VE L 1
20
MOBILE ENTERTAINMENT
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
32 ENG
OTHERS
31
DIMENSION AND P ARA MET ER
Product name:
Tv700
Po wer supply:
D C 12V
Dimensi on:
2 02 x 1 54 x 28 mm
Net weight:
7 10g
MOBILE ENTERTAINMENT
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
TECHNICAL INFORMATION
ENG 33
T ROU BL E S H OOTING
Ph enome non
No sound
No picture
Sounds only
with no picture
Bad image
Soluti on
1. Check that the unit has been turned on, and that the
volume wheel is turned up.
2. Please scan channels before watching.
3. Check antenna is connected and working OK.
4. Check setup for correct TV regional setting or ATV
system.
1. Check that the unit has been turned on.
2. Please scan channels before watching.
3. Check antenna is connected and working OK.
1. This phenomenon may appear when playing with the
low-capacity battery.
2. Please recharge the battery fully to be played once
again.
1. This phenomenon may appear when using in a moving
vehicle.
2. Please replace the antenna to another place with a
stronger signal.
3. Check that the settings of the TV system are right.
Low volume
1. Position the volume setting of the unit to a suitable
level.
No channel
can be
searched
1. The antenna may not be connected well.
2. Wrong regional setting or ATV system.
3. Channels setting may be encrypted at your location.
DA MAGE REQ UIRING SERVICE
Have the unit serviced by a qualified service technician if:
The unit has been exposed to rain or water.
The unit does not seem to operate normally.
The unit exhibits a marked change in performance.
DO NOT ATTEMPT TO SERVICE THE UNIT BY YOURSELF!
MOBILE ENTERTAINMENT
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
TV 7 0 0-E N G -N B - A2
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement