Nikon | Wireless Mobile Adapter Utility iOS | User's Manual | Nikon Wireless Mobile Adapter Utility iOS User's Manual

En
Wireless Mobile Adapter Utility (for iOS)
User’s Manual
Install the Wireless Mobile Adapter Utility on your smart device
to download pictures from a camera or control cameras remotely via a wireless mobile adapter.
Features
Use the adapter and Wireless Mobile Adapter Utility to:
Connect to the camera and take pictures
remotely using the smart device (05).
Take pictures and download them to the
smart device (09).
View pictures (012
12).
Download pictures to the smart device (015
15).
Use the smart device to share pictures downloaded from
the camera (018
18).
For information on inserting the adapter, see page 4.
1
Notices
• No part of this manual may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form without Nikon’s prior written permission.
• Nikon reserves the right to change the specifications of the hardware and software described in this manual at any time and without prior notice. Nikon will not be held liable for damages that
may result from any mistakes that this manual may contain.
System Requirements
Before installing the Wireless Mobile Adapter Utility, confirm
that your smart device (smartphone or tablet) meets the following system requirements:
OS
iOS 5.1, iOS 5.1.1
Wireless LAN 11b/g/n
2
D Using This Application for the First Time
Read the terms of use (022
22) before connecting to the wireless
mobile adapter.
D The Wireless Mobile Adapter
While the adapter is inserted, the camera exposure meters will not
turn off ; monitor the camera battery level to ensure that the camera does not power off unexpectedly. In addition, some camera
menu items may be grayed out and unavailable and the camera
can not be used for playback or live view. Movie recording and
bulb photography can not be used.
D Downloading Pictures to the Smart Device
Pictures are automatically resized to the standard size for the smart
device. NEF (RAW) images are converted to JPEG format; if the images were recorded using an NEF (RAW) + JPEG option, only the
JPEG copy will be downloaded. Exif data will be adapted to iOS
specifications.
3
Installing the App
1
Connect to App Store on the smart device and search for
“Wireless Mobile Adapter Utility”.
2
Install the Wireless Mobile Adapter Utility.
Establishing a Wireless Connection
1
Connect the wireless mobile adapter.
Attach the wireless mobile adapter to the camera and turn
the camera on. See the manual supplied with the wireless
mobile adapter for details.
2
Enable Wi-Fi on the smart device.
If Wi-Fi is off, turn it on.
3
Select the mobile adapter SSID.
Select the mobile adapter SSID (the default SSID begins
with “Nikon_WU_”). iOS-compliant devices can not be connected using WPS.
4
Launch the Wireless Mobile Adapter Utility.
After making sure that location services are on, launch the
Wireless Mobile Adapter Utility. When a connection is established, the LED on the wireless mobile adapter will glow
green and the main dialog for the Wireless Mobile Adapter
Utility will be displayed on the smart device. For information on taking pictures see page 5. For information on viewing pictures, see page 12
12.
4
Taking Pictures
Use Take photos to take pictures remotely and download them
to the smart device.
Taking Pictures Remotely
1
Tap Take photos.
The camera viewfinder will go dark and the smart device
will display the view through the camera lens.
Shutter icon
2
Focus.
D600: In normal- and wide-area AF AF-area modes, tap the
subject in the display to focus.
D3200: Proceed to Step 3. The camera focuses when the shutter icon is pressed.
5
3
Tap the shutter icon.
The shutter will be released after you remove your finger
from the icon and the camera focuses (note that no photo
will be taken while you are touching the icon or if the D3200
is unable to focus); the resulting photo is first saved to the
camera memory card and then downloaded to the smart
device. There is no need to point the smart device at the
wireless mobile adapter.
6
A The Remote Photography Display
Top: Return to the top display.
d: Change the following settings.
Option
Description
• WMAU (Wireless Mobile Adapter
Shoot
Utility): Use the smart device
to take pictures.
• Camera: Take pictures with the
camera, and then download
them to the smart device.
Live view Turn live view on or off.
(D600
only)
Download Choose whether pictures are auafter
tomatically downloaded to the
shooting smart device. Available only when
WMAU is selected for Shoot.
Camera settings (shutter speed, aperture, etc.;
not displayed when smart device is in landscape orientation)
Thumbnail area: View downloaded pictures
(not displayed when the smart device is in
landscape orientation).
7
D Remote Photography
Remote photography ends automatically when the battery in the
camera or smart device runs low. Note that using remote photography for an extended period may cause the camera’s internal
temperature to rise; if necessary, remote photography will end automatically to minimize damage to camera circuits.
The smart device can not be used to adjust camera settings; use
camera controls to adjust settings before starting Step 1. Regardless of the release mode selected with the camera, the self-timer
can not be used and only one picture will be taken each time you
tap the shutter icon. If subject-tracking AF is selected, the camera
will focus using wide-area AF; if face-priority AF is selected, the
camera will detect and focus on faces. Note that the display may
not update smoothly depending on the device and network conditions.
A D600
A shutter speed of “Time” is available in mode M. Choose a shutter
speed of A and select Shoot > WMAU (07), then tap the
shutter icon to open the shutter. Shooting ends when the icon is
tapped again.
A D3200
If the camera mode dial is rotated to i or j, pictures will be taken
in mode P. Note that live view is not available when the camera is in
GUIDE mode and Auto or No flash is selected for Easy operation.
Select another option or rotate the mode dial to another setting. In
normal- and wide-area AF modes, autofocus uses the focus point
selected with the camera.
8
Downloading Photos as They Are Taken
1
Tap Take photos.
2
Tap d.
9
3
Tap Camera.
4
Take photos.
Frame photos in the camera viewfinder and shoot. Photos
are downloaded to the smart device after being saved to
the camera memory card.
10
A The Photo Capture Display
Top: Return to the top display.
d: Change the following settings.
Option
Description
Shoot • WMAU (Wireless Mobile Adapter
Utility): Use the smart device to take
pictures.
• Camera: Take pictures with the
camera, and then download them
to the smart device.
Thumbnail area: View downloaded pictures (not
displayed when the smart device is in landscape
orientation).
11
Viewing Photos
Use View Photos to view the pictures on the camera memory
card and download them to the smart device, or to view pictures
after download.
Viewing Pictures
View the pictures in camera memory or on the smart device.
1
Tap View photos.
Tap View Photos to view the pictures on the camera memory card.
12
To view pictures in the camera roll on the smart device, tap
e.
2
View pictures.
Tap a thumbnail to display the picture full frame. You can
then swipe the display to view additional pictures.
Tap a to view information about the current image. To exit
to the thumbnail list, tap the folder name. Tapping Top in
the thumbnail list returns you to the top display.
13
D Movies
The Wireless Mobile Adapter Utility can not be used to view or
download movies.
D Deleting Pictures
Pictures can not be deleted using the Wireless Mobile Adapter Utility, but pictures can be deleted from the camera roll on the smart
device.
A Choosing a Folder
The smart device will either show a folder list or display the pictures
on the camera memory card as small “thumbnail” images. When
thumbnails are displayed, the folders can be viewed by tapping the
f icon, while folders are displayed, you can tap a folder to view its
contents in a thumbnail list.
14
Downloading Existing Pictures
1
Tap View photos.
Tap View photos to view the pictures on the camera memory card.
15
2
Select pictures for download.
Selecting Multiple Pictures
Tap Select and then tap thumbnails to select or deselect.
Selected pictures are indicated by a check mark.
Selecting Pictures One at a Time
Tap a picture in the thumbnail list to display it full screen
and tap the check mark to select or deselect. Swipe the display to view additional pictures.
Tap the folder name to return to the thumbnail list.
16
3
Tap Download.
Tap Download to download the selected pictures. Downloaded pictures are saved to the smart device camera roll.
A Dropped Connections
If the connection between the wireless mobile adapter and the
smart device is lost while a picture is being downloaded, the picture will not be saved to the smart device (connection loss may
occur if, for example, the camera turns off during download). Any
pictures downloaded before the connection was interrupted are
unaffected.
17
Sharing Pictures
Connect the smart device to a network with an Internet connection that will be used to share pictures and follow the steps
below.
1
Tap View photos.
2
Tap e.
Tap e to view the pictures that have been downloaded to
the smart device.
18
3
View pictures.
Tap a thumbnail to view the picture full frame.
4
Tap b.
After displaying a picture you want to
share, tap b and choose from a list
of picture-sharing apps and functions
(the specific contents of the list vary
from device to device).
19
Wireless Mobile Adapter Utility Options
The options listed below can be accessed
by tapping the c icon in the Wireless Mobile Adapter top display.
Connection Status
Option
Description
Camera
The model name and battery level for the camera currently connected.
Wireless Mobile
Adapter
View the wireless mobile adapter firmware version.
20
Settings
Option
Description
Synchronize clock Synchronize the camera clock with the smart device.
WMA settings
Adjust network settings for the wireless mobile adapt(Wireless Mobile
er.
Adapter settings)
SSID
Choose an SSID for the wireless mobile adapter. The
smart device displays the SSID when you connect to
the network manually.
Authentication
Choose the authentication method used for connection
to the network.
Password
Enter a password. The password type is selected using
Advanced settings > Password entry: choose ASCII for an
8- to 63-character alphanumeric password, HEX for a 64digit hexadecimal password.
Channel
Choose the wireless channel used by the network.
Auto power-off Choose the delay before the wireless mobile adapter
delay
enters sleep when there is no wireless connection.
Advanced
settings
• Password entry: Choose the password type.
• Sub-net mask: Enter a subnet mask.
• DHCP server IP address: Enter the wireless mobile adapter IP address.
• DHCP client IP address: Enter the smart device IP address.
Restore factory
Restore default settings.
defaults
21
Battery Warning Level
Remote photography will end automatically when the camera
or smart device battery reaches the selected level.
Help
Option
Description
Instructions
View instructions for using the Wireless Mobile
Adapter Utility.
Support websites
Access the support site for the Wireless Mobile
Adapter Utility.
App
View Wireless Mobile Adapter Utility version information.
Terms of Use
View the Wireless Mobile Adapter Utility terms of use.
A Trademark Information
App Store is a trademark of Apple Inc. iOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used
under license. All other trade names mentioned in this manual are
the trademarks or registered trademarks of their respective holders.
SB2H01(11)
6MWA3311-01
22
Download PDF

advertising