Data sheets TELETASK domotic system

Data sheets TELETASK domotic system
TELETASK
Domotics Systems
Data Sheets
Version: May 14th 2013
TELETASK Data Sheets EN V2013.0188.docx
Content
TDS10012
TDS10200
TDS10202
TDS12001xx
TDS12003
TDS12015xx
TDS12020xx
TDS12021xx
TDS12022xx
TDS12064xx
TDS12051
TDS12052
TDS12053
TDS12142
TDS12116
TDS12124
TDS12125
TDS12129
TDS12309
TDS12310
TDS12250xx
TDS12260xx
TDS12270xx
TDS12280
TDS12285
TDS14000
TDS15101
TDS15105
TDS15100
TDS1511x
TDS13500
TDS13502
TDS13524
TDS13525
TDS13608
TDS13610
TDS13620
TDS20620
TDS13226
TDS10130
TDS12501
TDS12502
TDS10119
TDS20101
TDS20110
TDS12510
TDS12202
TDS12203
TDS14042
TDS14043
TDS90160
TDS14104
TDS14108
TDS14061
TDS20061xx
TDS20062xx
TDS20063xx
TDS15200
TDS14021
MICROS+ central unit ............................................................................................... 11
NANOS central unit ................................................................................................... 16
AUTOBUS Extension Interface ................................................................................. 20
LATUS Touch Window .............................................................................................. 22
LATUS Touch Window with Monitor .......................................................................... 24
LATUS Touch Window with LCD display .................................................................. 26
AURUS-2 Touch panel .............................................................................................. 28
AURUS-4 Touch panel .............................................................................................. 31
AURUS-OLED Glass touch panel – 4x8 buttons (4 pages) ...................................... 34
AURUS-TFT 4.3” ....................................................................................................... 37
MAIOR 10” Color touch screen ................................................................................. 40
MAIOR 15” Color touch screen ................................................................................. 42
MAIOR 19” Color touch screen ................................................................................. 44
Proximity reader ........................................................................................................ 46
Digital input interface with 16 input ............................................................................ 49
COOKIE Digital Input Interface.................................................................................. 51
COOKIE Digital input interface with LED-feedback .................................................. 53
Infrared receiver ........................................................................................................ 55
Analogue input interface with 8 TELETASK inputs (0 – 10V) ................................... 56
Universal analog input interface ................................................................................ 58
Temperature sensor .................................................................................................. 61
Humidity sensor ......................................................................................................... 63
Light sensor ............................................................................................................... 65
Water (leak) sensor ................................................................................................... 67
Rain detector-meter ................................................................................................... 68
TELETOUCH telephone interface ............................................................................. 72
iSGUI for Smartphones, Tablets and PC .................................................................. 74
GUI+ (Software License) ........................................................................................... 77
GUI (Software License) ............................................................................................. 79
CONTROL TOWER Master or Client licenses .......................................................... 81
Relay interface 8x16A (with manual control) ............................................................. 83
Relay interface 8x10A (with plug-in relays) ............................................................... 85
Motor interface AC (4x350VA) .................................................................................. 87
Motor interface DC (4x2A) ......................................................................................... 89
Dimmer interface 8 x 0-10V output ............................................................................ 91
Fluorescent Dimmer interface 8 x 1-10V (+ 8x10A contact) ..................................... 93
DALI - DSI - DMX interface ....................................................................................... 95
DALI-address programming tool ............................................................................... 99
POWER DIMMER 4 x 1000VA (total max. 3000VA) - Wall mounting .................... 101
AUTOBUS power supply - DIN rail mounting .......................................................... 103
Mini Remote Control ................................................................................................ 105
Remote Control ....................................................................................................... 106
Audio phone to IP interface ..................................................................................... 107
Phone for AURUS-TFT............................................................................................ 109
DECT phone for AURUS-TFT (Wireless) ................................................................ 110
Infrared transmitter .................................................................................................. 111
Proximity card .......................................................................................................... 113
TAG key holder unit ................................................................................................. 114
Universal RS232 (A-V and other) interface ............................................................. 115
IR-flasher ................................................................................................................. 117
Audio splitter cable .................................................................................................. 119
Multiroom-Multisource Audio Amplifier 4 zones (MMA4) ........................................ 120
Multiroom-Multisource Audio Amplifier 8 zones (MMA8) ........................................ 122
HVAC Modbus Master interface .............................................................................. 124
HVAC Modbus Slave interface ................................................................................ 130
HVAC Modbus Slave interface ................................................................................ 134
HVAC Modbus Slave interface ................................................................................ 137
Airco interface licence ............................................................................................. 139
Galaxy interface 32 zones ....................................................................................... 141
TELETASK Data Sheet EN
3
Update May 2013
Content
TDS56421B
TDS90002PB
TDS90030
TDS90032
TDS90035
TDS90165
TDS90006
TDS90006HF
TDS90007
Demo case NANOS ................................................................................................. 144
LATUS family Wallbox for PLASTER BOARD ........................................................ 146
Flush mounting for AURUS-4, AURUS-OLED, AURUS-TFT.................................. 148
Flush mounting for AURUS-2 .................................................................................. 150
On-wall box for AURUS family ................................................................................ 151
AUTOBUS to 5 x RJ45 Splitter Box ........................................................................ 153
AUTOBUS network cable 2+4 ................................................................................. 155
AUTOBUS halogen free network cable 2+4 ............................................................ 156
AUTOBUS network cable 2+4 in flexible tube ......................................................... 158
TELETASK Data Sheet EN
4
Update May 2013
Introduction
Introduction
AUTOBUS
There is no doubt that the
TELETASK domotics system is
worldwide the most complete
one available today.
The TELETASK AUTOBUS is a
bi- directional high speed bus.
When you press a button
(closing
a
contact),
the
corresponding
interface
immediately
transmits
the
command
(including
error
detection
and
correction
information) via the AUTOBUS
cable to the central unit. The
central unit answers to this
command with a confirmation to
the transmitting interface. If this
is not the case, the interface will
retransmit his command.
It offers full control on:
•
•
•
•
•
•
•
•
lighting
heating
air conditioning
curtains
shutters
drapes
audio
video
Qualification
Control via:
•
•
•
•
•
•
•
•
push buttons
contacts (window contact...)
multi functional buttons
polyvalent touch panels
IR remote control
motion detectors
computer
telephone...
Different sensors:
•
•
•
temperature
light
humidity
Interfaces to:
•
•
•
alarm systems (Galaxy)
audio:
RC-5/ESI
Bang&Olufson
Bose
AudioAccess
...
telephone
TELETASK Data Sheet EN
Only
qualified
electrical
contractors, who have the
necessary
training
and
knowledge of the electrical and
electromagnetic
regulations
concerning the safety of the
end-user, are allowed to install
the TELETASK products.
Installation
The AUTOBUS cable has
always to be carefully installed
and is to be connected to every
AUTOBUS interface.
The AUTOBUS connection is
fourfold, plus one extra wire and
a shielding:
• the +12V connection (thick
red wire)
• the 0V connection (ground) (thick black wire)
5
• communication wire ‘A’ (thin
blue wire)
• communication wire ‘B’ (thin
white wire)
• The fifth wire, ‘IR-link’
connection is the thin green
wire. This wire is the connection
between the IR-receivers (of the
touch panels) and an IRtransmitter. This wire is not to
be connected to the central unit.
Remark: The AUTOBUS cable
is to be wired in bus
configuration. This means
that the cable starts at the
central unit and runs through
the house, connecting all the
installed interfaces on after
another. If necessary, a
limited
number
of
‘T’connections can be made at
the level of the central unit.
Terminating the
AUTOBUS.
In order to eliminate reflections
on the bus cable, it is necessary
to terminate by means of a
terminating resistor.
By default, there are no
terminating resistors connected.
The resistor is to be connected
at the far end of the AUTOBUS
cable at the last interface. This
is done by setting a jumper,
which is present on every
AUTOBUS interface.
When
the
communication
seems not to be working
perfectly, it is recommended to
set the terminating jumper in the
Update May 2013
Introduction
central
unit
(besides
AUTOBUS connector).
the
Inputs
Digital inputs (open/close)
Only voltage free contacts may
be connected to the digital
inputs (for example standard
wall mounted push buttons).
Normally, they are of the
‘normal open’ type.
It is not allowed to use contacts
which are switched more than
once per second.
Feed-back
The LED indicators in the touch
panel buttons, and the LED
indicators connected to the
interfaces
with
feed-back
output, do reflect the status of
the underlying function.
This may be the status of a light
or a mood. Also in this last
case, the LED is activated as
long as the mood is active.
Even if the function is controlled
from another area (in another
room), the status of the LED is
always upgraded to the real
time status of his function.
Analog inputs
Three types of sensors are
available to be connected to
these inputs.
They are:
• the temperature sensor
• the humidity sensor
• the light sensor
The connection between the
sensor and an analog input is to
be made by an individually
shielded cable.
Outputs
Relay outputs
The MICROS+ central unit is
equipped with 24 relaysoutputs, each capable of
switching 10A nominal.
This can be extended with
several power relays interfaces
(10/16A) onto the AUTOBUS.
All the relay interfaces have
voltage free contacts.
Remark: Inrush Currents.
Only a fraction before a relay is
closed, an arc is created
between both relay contacts.
This arc is already created with
a current from only 100mA. With
high currents the arc can be so
intense that the relay contacts
melt due to the released heat
and stick together. Generally
spoken the rule: “the higher the
inrush current, the higher the
risk that the relay contacts
sticks” counts.
In most cases the stuck
contacts breaks when the relay
opens due to the elasticity of the
Table: Inrush Currents
Some test results of typical AC voltage switch loads:
Type of the Load
Nominal Power
(VA)
Nominal Current
(IN)
Max. Inrush
Current (IHI)
IN / IHI
Duration 50% IHI
Ohms (resistant)
100
0,43
0,61
1,41
6,5 ms
Light Bulb (also halogen)
100
0,43
8,5
20
600 µs
TL-lamp (incl. fitting)
58
0,25
20
80
180 µs
Low-energy Light Bulb
17
0,074
13,5
180
70 µs
Transformer
85
0,37
13,4
36
4,5 ms
Contactor
115
0,50
15
30
5 ms
Shutters
110
0,48
1,1
2,3
5 ms *
Compressor Motor
200
0,87
17
20
5 ms *
Ventilator
1200
5,3
44
8,3
5 ms *
0,72
110
150
40 µs
Capacitor 10 µF
PC monitor with tube
60
0,26
76
290
1 ms
LCD screen for PC
10
0,044
70
1600
250 µs
* Augmented current during the complete inrush phase of the motor (100 500 ms)
These values are indicative and depend on the local situation. Errors or defects caused at the TELETASK products due to these values have no
claim to the TELETASK guarantee.
TELETASK Data Sheet EN
6
Update May 2013
Introduction
relays contacts. With a highinrush current, the contacts can
stick permanently. In that case
the relay is broken. To solve this
problem,
TELETASK
uses
special high inrush current
relays. These relays can bear
high inrush currents (IHI) which
are a multiple of the nominal
current (IN). Both values are
available in the data sheet of
the corresponding TELETASK
product.
The biggest disadvantage of an
inrush current is that you can’t
calculate is using the formula
I=P/U. For that reason the
inrush current of several loads
is measured in lab tests.
TELETASK put these values
indicative at your disposal in the
“Table Inrush Currents”.
Depending on the type of the
load the inrush values can be
different. Always you’re your
supplier the right nominal
current (IN) and inrush current
(IHI). That the inrush current can
be a multiple (up to a
hundredfold) of the nominal
current is often forgotten.
However this inrush current is
important to determine the
maximum load that can be
switched using one TELETASK
relay. Using the TELETASK
relay current values and the
current values of the load, you
are able to define the number of
lamps, equipment etc. that can
be
switched
with
the
TELETASK relay.
Example: How many TL lights
58W can be coupled to a relay
output of the MICROS central
unit? From the data sheet of the
MICROS+ (TDS10012) you
have Imax= 80A. Out the table
you have Imax= 20A. This means
that one MICROS relays is able
to switch up to 4 TL lights 58 W
(of the type used in the lab test).
The nominal current is in this
case no problem at all.
valve or a ventilation servo
motor.
Attention:
the
connection
between the analog output and
the unit which is to be controlled
has to be made by a shielded
cable. The shielding has to be
connected to earth at the central
unit.
Input - output
relations
Actions
The actions which are executed
by the TELETASK system are
directed by the software tables.
These tables are memorised in
the central unit. They contain
the relationship between the
input- and outputs.
Example: a standard push
button controls a light in the
kitchen. This means that there
is a relation between the button
and the kitchen light.
The
button is the INPUT and the
light is the OUTPUT.
PROSOFT
The relations are defined by the
PROSOFT software package.
Normally the installer first
defines the list of the connected
outputs, followed by the list of
inputs. Finally the relations
between the inputs and outputs
are defined.
There are different types of
relations. They are listed in the
‘list of functions’. Examples of
functions are: switch, dim,
sensor function, audio function,
etc...
No function
When you push on a button with
no dedicated function, no action
will occur. When starting a new
file in PROSOFT, all defined
inputs and outputs are at this
level. Only in the case of the
touch panels with LCD and VFD
display with 5 buttons, the upper
three buttons (n° 4, 5 and 6) are
pre-installed with ‘up’, ‘down’
and ‘menu’ functions (specially
for
heating
and
cooling
purposes).
The ‘switch’ (ON/OFF)
function
When pushing a button, when
using the ‘switch’ function, the
corresponding
relay
output
changes position.
Parameters:
1. Select a relay output.
The ‘dim’ (dimmer)
function
When pushing short on a button
with the ‘dim’ function, the
evolved dimmer output will
toggle between 0V (OFF° and
the mast memorised status of
the dimmer output. The speed
for lowering and increasing the
output level is defined in the
‘ramp speed’ parameter which
is available in the ‘outputs’
screen.
Parameters:
1.Select the desired analog
output
The ‘timed’ function
After pushing a button, the
evolved output is switched ON
(or OFF) for a preset time. After
this time is elapsed, the output
is set back to its former status
(for example to be used in
staircase lighting).
Parameters
1. Select an output
2. choose the temporarily status
3. Set the desired delay time
Analog outputs
Depending on the type of
central unit, there are 16, 40 or
120 analog outputs available.
They provide 0-10V control is
meant to be used to control light
dimmers or a heating/ cooling
TELETASK Data Sheet EN
Types of functions
The ‘motor’ function
(curtains, shutters...)
7
Update May 2013
Introduction
This type of function is
especially used to control
up/down left/right controllable
motors. This function controls
two relays by default. The first
relay controls the ON/OFF
working of the motor. The
second relay controls the
running direction of the motor.
The software controls these two
relays in a specific way, so the
user is able to control such
motor with only one button:
When you push the button:
• the
direction
relay
is
inversed
• the on/off relay (which is
called the ‘power’ relay) is
activated (the output contact
closes)
• the shutter lowers
• after some time the shutter
reaches the end.
• after a preset time, the
power relay is deactivated to
secure the motor against
overheating caused by blocking.
When the button is pushed a
second time before the preset
time is elapsed:
• the
power
relay
is
deactivated immediately to stop
the motor at its current location.
When pushed again.
• the software deactivates the
power relay, inverses the
direction relay and activates the
power relay again (and the
shutter goes up again).
Parameters:
1. Select the output ‘power’
relay.
2. Select the output ‘direction’
relay
3. Define the preset run-time
(set it at some five seconds
more than the normal full
up/down
runtime
The ‘fan’ function
This function makes it very easy
to control an exhaust fan
together with a light point. After
the light is switched OFF, the
fan stays active for a preset
time.
Parameters:
1. Select the output relay on
which the light is connected to.
TELETASK Data Sheet EN
2. Select the output relay which
controls the fan.
3. Set the delay time.
Transparent
This type of function reflects the
position of the input to the
status of the connected output
(relay, flag...)
Parameters:
1. Select an output (or flag or
local mood).
Remark: even a local mood can
work the same way of a local
mood.
Motion detector
To be combined with a motion
detector.
When motion is detected
(contact
s
closed)
the
connected output will be
‘high’(ON). When no motion is
detected, the output will be ‘low’
(OFF) after the delay time is
elapsed.
Parameters:
1. Select an output or a local
mood
2. Select the ‘ON’ level
3. Define the delay time
Local mood
It is sufficient to press a button,
to activate the underlying local
mood, or to deactivate it when
the mood was already active.
Not only functions like switch
and dim, but also other type of
functions can be activated in a
local mood. For example
changing temperature set points
to a pre defined level. It is also
possible to activate other local
moods from within a local mood.
Parameters:
1. Select the desired output
2. Add him to the local mood
list
3. Select the ON/OFF level
4. Do the same with the other
items you want to be changed
by the local mood
5. ‘Toggle’: when this item is
marked, all the circuits in the
local mood will be deactivated
when the button is pushed.
8
Timed local mood
Push the corresponding button
to activate or deactivate the
timed local mood.
Every action which is contained
in the TLM is processed one
after another, with a time in
between two actions as it is
defined (x seconds) .This interdelay time is noted in the most
right column of the TLM. The
mood execution is stopped and
all the concerned relays and
dimmers are inversed, when the
button of the mood is pushed
during the execution period.
Parameters:
1. Select the desired output
2. Add other actions
3. Define the level of each
action (on/off/x%)
4. Enter the inter-delay time
5. ‘Repeat’: if marked, the
timed local mood will start back
the first action after executing
the last one, until it is stopped
by pushing the evolved button.
General mood
The only difference between a
local mood and a general mood
is the number of actions
evolved.
With the General
Mood, all the connected outputs
can be influenced. So you can
change an unlimited number of
outputs by pushing the evolved
General Mood button.
A General Mood can only be
activated. It is not possible to
deactivate the evolved output.
Parameters:
1. Select an output
2. Define its level and do the
same for all the other outputs
you want to be influenced by the
General Mood.
3. Select, if desired, the tab
‘extra functions’ and add a
maximum of 5 commands which
are to be executed.
Temperature
When you have entered a
sensor- temperature function,
you have the choice between
the following actions:
• Temperature UP (steps of
0.5 °C)
Update May 2013
Introduction
• Temperature DOWN (steps
of 0.5 °C)
• Temperature TOGGLE:
Switch between DAY and
NIGHT.
Switch between DAY and
STANBY.
Switch between NIGHT and
STANDBY.
• set to DAY preset.
• set to STANDBY preset.
• set to NIGHT preset.
• Frost protection temperature
(is a preset value)
• Mode selection: only HEAT,
only COOL, AUTO cool/heat.
• Switch Temperature zone
ON or OFF.
• Window OPEN, activate
frost protection.
Using the different thermostat
functions, you are able to create
an advanced integration of your
heating/cooling system.
More information on this item is
available in the TELETASK
technical handbook or in the
manual of the corresponding
user interfaces.
supported audio actions are
these you need to basically
control a tuner, cd or a tape...
This
means
ON/OFF/FM/CD/TAPE/NEXT
TRACK/NEXT PRESET. This
list of actions may slightly differ
from audio system to system.
(based
on
the
type
of
TELETASK interface which is
used).
The following audio interfaces
are available at TELETASK:
1. RC5 interface (infra red
transmitter which support all
RC5
compatible
(mainly
European) systems. On request
TELETASK can deliver this
interface
containing
other
protocols (JVC, SONY,...)
2. Audio
interface
for
Bang&Olufson
(multi-room
system).
3. Audio interface for Audio
Access (multi-room / multisource system).
4. Audio interface for Bose
lifestyle X8 systems (multi-room
/ multi source system).
5. IR Based systems: every IR
controllable system can be
integrated
using
the
IR
learnable interface.
Regime
For a detailed description of the
‘regime’ and ‘clock’ system,
refer to the TELETASK manual.
The
TELETASK
system
possesses a clock system,
wherein a regime can be active
or not active. The following
actions are possible:
• Regime ‘DAY’ is active
(activate the DAY regime, and
deactivate
all
the
other
regimes).
• Regime ‘week-end’.
• Regime
‘automatic’
(automatically switch between
DAY and NIGHT regimes,
based on the clock; at 00am).
• Presence simulation regime
• No regimes are active
Audio
This functions gives you the
possibility to activate a certain
function on a connected audio
system, just by pushing a button
or a similar event. The
TELETASK Data Sheet EN
Flags
To be able to use logic functions
and conditions, TELETASK also
supports the use of ‘flags’. A
flag can be ‘true’ or ‘false’ (1 or
0), reflecting the status of an
input or an event.
Example: when you need to
know whether a light sensor
detects a ‘light’ or ‘dark’
situation (above or below a
certain lux-level) you can use a
flag to define this status. This
flag can then be used in a
condition to control an outdoor
light or for example to control a
local mood ‘evening’...
Condition
A logical function is realized
with the ‘condition’ function. The
condition is ‘true’ or ‘false’,
based on the rules in the
condition.
5
conditions
can
be
implemented in the condition
function.
Each
individual
9
condition is compared with the
actual status of the concerned
parameter
(on/off/%).
The
comparison is based on the
parameters = / < / =< / > / =>.
The final result of the condition
function is based on a number
of logical functions AND and
OR.
More information is available in
the
TELETASK
technical
handbook.
Process function
The PROCESS function, once
she is started, runs continuously
and is checking continuously
her evolved status or process.
This function generates an
action based on the status
change of a relay/dimmer/ local
mood/ flag or condition which is
monitored. The action to take is
dependent of the monitored
function.
Some parameters can be set,
which define how the activation
function will react on the
changes in the monitored
function.
Important remark: The process
function has to be activated
(=started) by an input or at the
power-up of the central unit.
A typical example of the use of
a process function is the
activation of the circulation
pump of the heating system.
When a zone valve is opened,
the circulation pump is activated
to run the hot (or cold) water
through the system.
More information is available in
the
TELETASK
technical
handbook.
The ‘if-then-else’ function
With the if-ten-else function, you
can define a condition on which
an action has to be undertaken,
but if the condition is different
(else) another action has to be
undertaken.
The condition is verified only on
the moment that the ‘if-ten-else’
function is called (for example
on the moment that the button
which holds this function is
pushed).
Parameters:
Select the function:
Update May 2013
Introduction
1. Select the condition in the
‘name function’ and ‘if condition
true’
field.
Remark:
relay
‘on’
is
comparable with ‘true’
2. Select the ‘then’ function
and evolved status to which the
action has to be influenced.
4. Select the ‘else’ function and
the status.
Example for the application of
the if-ten-else function. Night
hall
In the case that the lights in the
night hall are controlled by a
dimmer,
the
following
functionality is a good often
used example for the control of
these lights.
If during the day (the general
mood
‘night’ is ‘false’), the
button or motion sensor in the
hall is activated, the lights in the
night hall are switched on to
100%. If the same button or
motion detector is activated
during the night (the ‘night’ local
mood is ‘true’), then, the lights
in the hall are switched to for
example only 30%. In short, you
use the function in the way: if
day, go to 100%, else go to
30%.
TELETASK Data Sheet EN
10
Update May 2013
Central Units
TDS10012
MICROS+ central unit
Central unit equipped with 2 AUTOBUS connections. Configuration via USB and
Ethernet connection. The Ethernet connection can be connected to a LAN
network. 8 dimmer outputs 0-10V are default available in the unit.
A maximum number of 2 x 31 interfaces can be connected on the two default
AUTOBUS connections. Via the AUTOBUS extension interface the MICROS+ can
be extended to 4 AUTOBUS connections, supporting up to 4 x 31 = 124
connected AUTOBUS interfaces in total.
Up to 10 MICROS+ central units on LAN can behave as one large integrated
system with up to 1240 interfaces. See technical handbook for remarks.
Download the latest version of PROSOFT Suite on www.teletask.eu
Application:
Characteristics:
* The system and timer limits
and the number of
controllable in- and outputs
are in relation with the
current PROSOFT version.
Home Automation solutions with a maximum capacity of 1500
sensors and actors (inputs and outputs).
Outputs*
Equipped with 24 internal plug-in relays:
IN = 10A/250VAC cos ϕ 0,7
IHI = 80Amp (20ms) (see Remark: Inrush Currents)
Equipped with 8 internal dimmer control outputs 0-10V
Maximum capacity: 500 outputs (the total number of relays
outputs + dimmer outputs + motor outputs together is 500)
Output impedance (0-10V): 500Ω
Inputs*
Equipped with:
- 32 inputs for voltage free contacts
- 2 analog TDS sensor inputs (temperature, light and humidity)
- 2 AUTOBUS connections (extendable to 4 using the optional
TDS10202 AUTOBUS extension interface)
- USB connection
- Ethernet connection
Each AUTOBUS has a capacity of up to 31 AUTOBUS
interfaces (one physical interface may occupy more than one
address)
AUTOBUS length: max.1000m (about 150m without optional
power supply, depending on the used interfaces)
System Limits*
500 Local Moods
50 General Moods
500 Rooms
50 Timed Local Moods
500 Sensor Zones
50 Audio Zones.
250 Transparent Functions
250 Timed or Motion Detector Functions
250 Fan Functions
250 Process Functions
500 Clock Actions
500 Flags
500 If-Then-Else Functions
500 Messages and/or Alarms
500 Conditions
500 Chip Cards and/or Proximity Tags
Timer Limits*
Fan Function: max. 7200 sec.
Timed Function: max. 7200 sec.
For existing systems it is
possible to order an upgrade
(TDS1501x) of the central to
reach the latest and in this
document mentioned
characteristics.
TELETASK Data Sheet EN
11
Update May 2013
Central Units
Motor Function: max. 7200 sec.
Timed Local Mood:
max. 7200 sec. per step
Motion Detector: max. 7200 sec.
Settings:
Power Supply
Voltage: 100-250 VAC
Frequency: 50Hz/60Hz
45W full load (consumption max. 65W)
Own consumption: 0,2A-1,35A
Programming
With PROSOFT Suite 3.1 or higher.
AUTOBUS
terminating resistor
Integrated on the MICROS+ pcb
Restart
‘Restart’ Switch: restart the central unit
Reset to factory
settings
‘SW1’+‘SW2’ long (10s): restart the central unit to factory
settings
IP address
‘SW2’: Sends the IP address of the central unit to your PC (only
in case of communication over Ethernet)
Installation:
Connections:
To be mounted on a flat surface. Eye level is recommended
Separated cable trunks for the inputs and the outputs:
• Inputs (very low voltage): through the rectangular opening in
the lower-left corner.
• Outputs (low voltage): through the round break-out holes in
the bottom and back plate.
Direct Contact
Inputs:
Plug-in screw terminal
Wires max. 1,5mm² (advised wires 0,5- 0,8mm²)
Direct Analogue
Inputs
Plug-in screw terminal
AUTOBUS
Plug-in screw terminal
Relays Outputs
Plug-in screw terminal
AUTOBUS extension Using the special connection to an external TDS10202
interface
AUTOBUS extension interface (optional).
USB
USB B connection for direct communication with the PC
Ethernet
Connection to the LAN network using a RJ45/CAT5 patch cable
Power Supply
By power cord (supplied with the central unit)
Earth connection
Always connect the main earth connection to the earth
connection of your electrical installation. Use the internal screw
in the MICROS+ housing at the lower-right corner.
Power
Consumption:
0.3 A max.
Dimensions:
450 W x 365 H x 80 D (mm)
Net | Gross Weight:
4,9 kg | 6,0 kg
TELETASK Data Sheet EN
12
Update May 2013
Central Units
Schematic Drawings:
TELETASK Data Sheet EN
13
Update May 2013
Central Units
TELETASK Data Sheet EN
14
Update May 2013
Central Units
TELETASK Data Sheet EN
15
Update May 2013
Central Units
TDS10200
NANOS central unit
DIN-rail compatible central unit equipped with 2 AUTOBUS connections.
Configuration and communication via USB and Ethernet (LAN/WAN) connection
with PROSOFT Suite.
2 x 31 (=62) AUTOBUS interfaces can be connected or 4 x 31 (=124) in
combination with the TDS10202 AUTOBUS extention interface.
Up to 10 NANOS central units on LAN can behave as one large integrated
system with up to 1240 interfaces. See technical handbook for remarks.
Download the latest version of PROSOFT Suite on www.teletask.eu
Application:
Characteristics:
* The system limits and the
Home and building automation solutions with a
maximum capacity of 1500 inputs and outputs (x10 over
LAN).
Outputs*
Maximum capacity: 500 outputs (the total number of
relays outputs + dimmer outputs + motor outputs
together is 500).
Inputs*
Equipped with:
Two AUTOBUS connections (extendable to 4 using the
optional TDS10202 AUTOBUS extension interface).
Each AUTOBUS has a capacity of up to 31 AUTOBUS
interfaces (one physical interface may occupy more than
one address).
AUTOBUS length: max.1000m (about 150m without
optional power supply, depending on the number and
type of connected interfaces).
System Limits*
500 Local Moods
50 General Moods
500 Rooms
50 Timed Local Moods
500 Sensor Zones
50 Audio Zones
250 Transparent Functions
250 Timed or Motion Detector Functions
250 Fan Functions
250 Process Functions
500 Clock Actions
500 Flags
500 If-Then-Else Functions
500 Messages and/or Alarms
500 Conditions
500 Chip Cards and/or Proximity Tags
Timer Limits*
Fan Function: max. 7200 sec.
Timed Function: max. 7200 sec.
Motor Function: max. 7200 sec.
Timed Local Mood: max. 7200 sec. per step
Motion Detector: max. 7200 sec.
Power Supply
2 x 12VDC input (one for each AUTOBUS)
number of controllable inand outputs are in relation
with the current PROSOFT
version.
For existing systems it is
possible to order an
upgrade of the central unit
to reach the latest
characteristics.
TELETASK Data Sheet EN
16
Update May 2013
Central Units
AUTOBUS 1 and 2 are galvanically isolated if every
AUTOBUS has its own isolated power supply.
Settings:
Programming
With PROSOFT Suite 3.1 or higher.
The latest version of PROSOFT Suite can be
downloaded on www.teletask.eu – downloads, using a
“end-user” or “professional” log-in (register on
www.teletask.eu – login – register).
AUTOBUS
terminating resistor
Integrated on the unit
Restart
Restarts the central unit
SW1
No functionality
SW2
Sends the IP address of the central unit to your PC (only
in case of communication over Ethernet)
Reset to factory
settings
‘SW1’+‘SW2’ long (10s): restart the central unit to factory
settings
Installation:
Connections:
Standard DIN-rail mounted. Eye level is recommended
AUTOBUS 1
Plug-in screw terminal (including shielding)
AUTOBUS 2
Plug-in screw terminal (including shielding)
AUTOBUS extension Special connection to an optional TDS10202 AUTOBUS
interface
extension interface (becomes 4 x AUTOBUS).
USB
USB B connection for direct communication with the PC
Ethernet
Connection to the LAN network using a RJ45/CAT5
patch cable
Power Supply
Plug-in screw terminal
Earth connection
Always connect this central earth connection to the earth
connection of your electrical installation.
Power Consumption:
Consumption is depending of the interfaces connected to
the busses (consumption without interfaces: 0,5A bus on
the first; 0,1A on the second bus)
Dimensions:
78,5 H x 160 W x 60D mm
Net | Gross weight:
0,240 kg | 0,370 kg
IP protection rate:
IP20
TELETASK Data Sheet EN
17
Update May 2013
Central Units
Schematic Drawings:
TELETASK Data Sheet EN
18
Update May 2013
Central Units
System Limits
PROSOFT Suite
These limits count for 1 central unit. When multiple central units are
connected to each other (DoIP concept) you can multiply the limits below by
the used number of central units. For example, 10 central units linked
together can support up to 10 x 500 = 5000 outputs!
Central Unit
MICROS+
NANOS
Reference
TDS10012
TDS10200
PROSOFT Suite
V3.0
V3.0
Max. number of “I”+”O”
Interfaces
124 (4x31)
124 (4x31)
Max. number of outputs
(relays + dimmer +
motor)
! Limited by the max.
number of ”I”+”O”
interfaces
500
500
Timer
250
250
Transparent
250
250
Fan
250
250
Process
250
250
Step
50
50
Local Moods
500
500
Timed Local Moods
50
50
General Moods
50
50
Flags
500
500
If-Then-Else
500
500
Conditions
500
500
Messages and Alarms
500
500
Sensor Zones
500
500
Audio Zones
50
50
Clock Actions
500
500
Chip Cards and Tags
500
500
Rooms
500
500
TELETASK Data Sheet EN
19
Update May 2013
General Interface
TDS10202
AUTOBUS Extension Interface
The AUTOBUS Extension interface is to be used with the MICROS+ and
NANOS central unit to extend the number of AUTOBUS connections from two
to four (AUTOBUS 3 and 4).
Application:
Characteristics:
Extension of the number of AUTOBUS connections
for the MICROS+ and NANOS central unit.
AUTOBUS
Double AUTOBUS. Both busses are galvanic
sealed from each other if powered by two separated
power supplies 12V DC (available as option ref.
TDS10130)
Power Supply
12V DC (we recommend TDS10130 40W)
Settings:
Via PROSOFT Suite 3.0 or higher
Installation:
DIN rail mounting
Connections:
AUTOBUS
5 Screw terminals per connection (+,-,A,B and
shielding)
Power Supply
Screw terminals
MICROS+
Via shielded RJ45/CAT5 cable. Supplied with the
unit (2 meter).
Max. allowed cable length: 2m
Power Consumption:
Not applicable
Dimensions:
81 W x 90 H x 60 D (mm)
Gross weight:
0,200 kg
IP protection rate:
TELETASK Data Sheet EN
IP20
20
Update May 2013
General Interface
Schematic Drawing:
TELETASK Data Sheet EN
21
Update May 2013
Input Interface
TDS12001xx
LATUS Touch Window
The LATUS touch window has a touch sensitive area, which contains 16
buttons. These buttons can be used to control all kind of domotics functions.
Each of the 16 buttons is provided with a user adapted text (f.e. ‘central light’)
and pictogram (f.e. the symbol of a lamp). Each pictogram has a feed-back
LED to reflect the status of the button.
Due to this new feature, LATUS can offer the highest flexibility, combined
with a beautiful design.
LATUS has a night lighting, IR receiver for remote control, built-in buzzer and
a cleaning button.
Several types of front plate can be ordered separately: TDS90301
Application:
Characteristics:
Settings:
AUTOBUS compatible interface
General
16 buttons + 1 cleaning button and printable label, slided at
the back of the touch sensitive area
Infrared receiver for the control of the buttons using the
TELETASK remote control.
IR buttons 1 to 8 control LATUS button 1 to 8
IR buttons S2 + 1 to 8 control LATUS button 9 to 16
Buzzer.
Labelling
To be printed on the enclosed printable labels using a
standard inkjet printer. Label templates can be downloaded
from www.teletask.be
Cleaning
Use only dry microfiber cloth. Never use liquids or solvents!
Order numbers
TDS12001YL
TDS12001WL
TDS12001YB
TDS12001WB
Buttons functions
With PROSOFT Suite (from version V2.75)
Buzzer and IR functionalities are settable in the PROSOFT
software from version V2.75 and up.
AUTOBUS address
Through rotary switches ROT1 + ROT2
The interface takes two addresses of the AUTOBUS (the
one set with ROT1/ROT2 and the one following this address
(set +1))
Installation:
Connections:
Yellow feedback LED’s
White feedback LED’s
Yellow feedback LED’s, B&O compatible.
White feedback LED’s, B&O compatible.
Mounting in a BTicino wall box 506L (brick wall: = ref.
TDS90002) or PS567N (plaster board: = TDS90002PB).
AUTOBUS
With dedicated connection set (included with the package)
IR-link
on the AUTOBUS connection (green wire)
Power Consumption:
max. 57 mA
Dimensions:
Front plate: 95 H x 195 W x 7 thick-on wall (mm)
Gross Weight:
0,300 kg
TELETASK Data Sheet EN
22
Update May 2013
Input Interface
Schematic Drawing:
TELETASK Data Sheet EN
23
Update May 2013
Input Interface
TDS12003
LATUS Touch Window with Monitor
The LATUS Monitor touch window works as a discrete quality colour monitor
to be connected with up to two video cameras.
For such controls there are 3 touch sensitive buttons on the touch screen to
control a door, gate, light Button 1 has a change-over contact output (f.i.
camera selection). Button 2 and 3 have both normal-open voltage free output
contact. Typical applications for these contacts are the control of lights,
gates, doors If you press the video screen, it is switched on/off. When
combined with a wireless indoor phone you get a complete video-doorphone
system.
LATUS Monitor is a stand alone unit which only needs 12-24V DC power
supply. If you want to integrate this LATUS Monitor with your home
automation system, you can mount a COOKIE interface (TDS12124) in the
wall box.
Front panel to be ordered separately (f.i.TDS90103WH)
Application:
Characteristics:
Colour monitor for composite video camera’s
(monochrome and colour).
General
2.5” colour TFT screen with touch screen.
3 controllable output contacts for multi purpose
application.
R1 is controlled by push button 1 and is settable as
pulse or toggle (change-over) contact.
R2 and R3 are controlled by push buttons 2 and 3 and
have both pulse contacts (normal open contact)
Labelling
To be printed on the enclosed printable labels using a
standard inkjet printer. Label templates can be
downloaded from www.teletask.be
Cleaning
Use only dry microfiber cloth. Never use liquids or
solvents!
Settings:
Jumper setting for a relay 1 (output change-over
contact pulse or toggle setting).
This contact can f.i. be used to switch between two
connected camera’s.
Installation:
Mounting in a BTicino wall box 506L (brick wall=ref
TDS90002) or PS567N (plaster board walls = ref
TDS90002PB).
Front panel to be ordered separately (f.i.
TDS90301WH).
Connections:
12-24V DC power supply input **** mA
Video input: composite video 1V p/p.
Relay 1: change-over contact max 24 V/1A.
Relay 2: normal open contact max 24V/1A.
Relay 3: normal open contact max 24V/1A.
Power Consumption:
Maximum 120mA @ 12VDC / 65mA @ 24VDC
(with display off and relays off: 20mA @12VDC / 6mA
@ 24VDC)
Dimensions:
Front plate: 95H x 195W x 7 on-wall thickness (mm)
Net | Gross Weight:
0,140 kg | 0,150 kg
TELETASK Data Sheet EN
24
Update May 2013
Input Interface
Schematic Drawing:
TELETASK Data Sheet EN
25
Update May 2013
Input Interface
TDS12015xx
LATUS Touch Window with LCD display
The LATUS touch window with LCD display is an AUTOBUS interface for the
user friendly control of heating/cooling and the control of several domotics
functions. The first 8 of 16 buttons are preset with thermostat functionalities,
but they can freely set, like the 8 other buttons to any domotics functionality.
The LCD with white dimmable backlight displays the settings of the
temperature, humidity and light sensors or messages and alarms in very
readable gray characters.
Every button can have a personal adapted inscription and/or an icon. The
buttons 9-16 are equipped with an integrated feedback LED.
The LATUS with LCD display also has a night lighting, IR receiver for remote
control, built-in buzzer and a cleaning button,
Application:
Characteristics:
Settings:
AUTOBUS compatible interface with LCD display.
General
White LCD Display with 2x16 grey characters.
16 buttons + 1 cleaning button and printable label, slided at
the back of the touch sensitive area
Infrared receiver for the control of the buttons using the
TELETASK remote control.
IR buttons 1 to 8 control LATUS button 1 to 8
IR buttons S2 + 1 to 8 control LATUS button 9 to 16
Buzzer.
Labelling
To be printed on the enclosed printable labels using a
standard inkjet printer. Label templates can be downloaded
from www.teletask.be
Cleaning
Use only dry microfiber cloth. Never use liquids or solvents!
Order numbers
TDS12015YL
TDS12015WL
TDS12015YB
TDS12001WB
Buttons functions:
With PROSOFT Suite (EEprom V2.75)
Buzzer and IR functionalities are settable in the PROSOFT
software from version V2.80
AUTOBUS address
Through rotary switches ROT1 + ROT2
The interface takes two addresses of the AUTOBUS (the
one set with ROT1/ROT2 and the one following this address
(set +1)
Installation:
Connections:
Yellow feedback LED’s
White feedback LED’s
Yellow feedback LED’s, B&O compatible.
White feedback LED’s, B&O compatible.
Mounting in a BTicino wall box 506L (brick wall: = ref.
TDS90002) or PS567N (plaster board: = TDS90002PB).
AUTOBUS
With dedicated connection set (included with the package)
IR-link
on the AUTOBUS connection (green wire)
Power Consumption
50 mA
Dimensions:
Front plate: 95 H x 195 W x 7 thick-on wall (mm)
Gross Weight:
0,34 kg
TELETASK Data Sheet EN
26
Update May 2013
Input Interface
Schematic Drawing:
TELETASK Data Sheet EN
27
Update May 2013
Input Interface
TDS12020xx
AURUS-2 Touch panel
The AURUS features a hardened glass touch panel with 2 buttons. It
comes in 4 different colors: WHITE, BLACK, ALUMINUM GREY PEARL
and GOLD PEARL.
The buttons have white LED lights and a click sound for clear and instant
feedback.
Soft night light and a build-in IR make sure you command your AURUS in
any circumstances.
The AURUS is mounted in a single wall-box TDS900000 (brick walls) or
TDS90000PB (Plaster board walls) with screws or claws (claws included
in package). Can be easily rotated.
Application:
Characteristics:
Settings:
Installation:
AUTOBUS compatible interface
General
Natural glass front plate, ceramic background
printed and thermal hardened
2 capacitive sensitive buttons
Infrared receiver
Temperature sensor
Buzzer
Order numbers
TDS12020WH white
TDS12020BL black
TDS12020AU gold
TDS12020LG aluminium-grey
Cleaning
Use only dry microfiber cloth. Never use liquids or
solvents!
Button functions
Via PROSOFT Suit V3.3 or higher.
AUTOBUS address
Via rotary switches ROT1 + ROT2 (“Tens” &
“Unit”)
AURUS uses only 1 AUTOBUS address.
Jumpers
AUTOBUS terminating resistor (only to be set
when last interface on the bus cable)
Standard mounting
To be mounted with included wall bracket in about
any standard single wall box.
Or order the TELETASK standard single wall box
for brick walls ref. TDS90000. For plaster board or
other hollow walls order ref. TDS90000PB.
To be placed in horizontal position but can also be
placed in vertical position.
To change the orientation after installation, place a
flat screw driver in the provided slot at the back of
the housing.
Flush mounting
Use Flush mounting box TDS90032 for flat
mounting. For hollow walls this has to be
combined with TDS90031.
Rem.: Normal operation of the temperature sensor
TELETASK Data Sheet EN
28
Update May 2013
Input Interface
will be disturbed with flush mounting.
Connections:
On-wall mounting
Use the TDS90035 on-wall box in case of
concrete, marble,
walls, if the standard in-wall
solution is not possible.
AUTOBUS
With dedicated connection set (included with the
package).
IR-link
On the AUTOBUS (green wire).
Power Consumption:
Dimensions:
Max. 18 mA
Front plate
90W x 90H x 13T thickness on wall (mm)
Net | Gross Weight:
TELETASK Data Sheet EN
0,160 kg | 0,260 kg
29
Update May 2013
Input Interface
Schematic Drawing:
TELETASK Data Sheet EN
30
Update May 2013
Input Interface
TDS12021xx
AURUS-4 Touch panel
The AURUS features a hardened glass touch panel with 4 buttons. It
comes in 4 different colors: WHITE, BLACK, ALUMINUM GREY PEARL
and GOLD PEARL.
The buttons have white LED lights and a click sound for clear and instant
feedback.
Soft night light and a build-in IR make sure you command your AURUS in
any circumstances.
The AURUS is mounted in a single wall-box TDS900000 (brick walls) or
TDS90000PB (Plaster board walls) with screws or claws (claws included
in package). To be placed in vertical position but can also be placed in
horizontal position.
Application:
Characteristics:
Settings:
Installation:
TELETASK Data Sheet EN
AUTOBUS compatible interface
General
Natural glass front plate, ceramic background
printed and thermal hardened
4 capacitive sensitive buttons
Infrared receiver
Temperature sensor
Buzzer
Order numbers
TDS12021WH white
TDS12021BL black
TDS12021AU gold
TDS12021LG aluminium-grey
Cleaning
Use only dry microfiber cloth. Never use liquids or
solvents!
Button functions
Via PROSOFT Suite
T° sensor functions supported starting with
PROSOFT Suit V3.2 or higher.
AUTOBUS address
Via rotary switches ROT1 + ROT2 (“Tens” &
“Unit”)
AURUS uses only 1 AUTOBUS address.
Jumpers
AUTOBUS terminating resistor (only to be set
when last interface on the bus cable)
Standard mounting
To be mounted with included wall bracket in about
any standard single wall box.
Or order the TELETASK standard single wall box
for brick walls ref. TDS90000. For plaster board or
other hollow walls order ref. TDS90000PB.
To be placed in vertical position but can also be
placed in horizontal position.
To change the orientation after installation, place a
flat screw driver in the provided slot at the back of
the housing.
Flush mounting
Use Flush mounting box TDS90030 for flat
mounting. For hollow walls this has to be
combined with TDS90031.
31
Update May 2013
Input Interface
Rem.: Normal operation of the temperature sensor
will be disturbed with flush mounting.
Connections:
On-wall mounting
Use the TDS90035 on-wall box in case of
concrete, marble,
walls, if the standard in-wall
solution is not possible.
AUTOBUS
With dedicated connection set (included with the
package).
IR-link
On the AUTOBUS (green wire).
Power Consumption:
Dimensions:
Max. 18 mA
Front plate
90W x 140H x 11 thickness on wall (mm)
Net | Gross Weight:
TELETASK Data Sheet EN
0,300 kg | 0,350 kg
32
Update May 2013
Input Interface
Schematic Drawing:
TELETASK Data Sheet EN
33
Update May 2013
Input Interface
TDS12022xx
AURUS-OLED Glass touch panel – 4x8 buttons (4 pages)
AURUS-OLED is a glass touch panel with eight capacitive approach
sensitive buttons. It features a hidden menu structure with four fully
customizable pages (two pages are pre-programmed as a audio and a
temperature control page).
There are eight (night illuminated) feedback LED’s, a built-in infrared
receiver for remote control, a buzzer and a built-in temperature sensor for
room temperature control.
AURUS is available in black, white, gold and aluminium grey versions.
The unit can be mounted in a single wall box, in vertical or horizontal
position, the choice is up to you. Even after installation the positioning can
be changed in seconds, any time you like.
Application:
Characteristics:
AUTOBUS compatible interface
General
Natural glass front plate, ceramic background
printed and thermal hardened
8 capacitive sensitive buttons
Hidden menu structure (3 extra pages of which 2
pre-programmed as audio and temperature page –
every page is customizable from out of PROSOFT
)
Hidden button for cleaning function (press long on
middle hidden menu button)
Build-in infrared receiver for remote control
(TDS12051, TDS12502)
Build-in temperature sensor for room temperature
control (floor heating, ventilation heating and airconditioning).
Buzzer
Order numbers
Settings:
Installation:
TELETASK Data Sheet EN
TDS12022WH white
TDS12022BL black
TDS12022AU gold
TDS12022LG aluminium-grey
Cleaning
Use only dry microfiber cloth. Never use liquids or
solvents!
Configuration
Via PROSOFT Suite
T° sensor functions supported starting with
PROSOFT Suit V3.2 or higher.
AUTOBUS address
Via rotary switches ROT1 + ROT2 (“Tens” &
“Unit”)
AURUS uses only 1 AUTOBUS address.
Jumpers
Terminating resistor. To be used when the
interface is last interface on the AUTOBUS cable.
Standard mounting
To be mounted with included wall bracket in about
any standard single wall box.
Or order the TELETASK standard single wall box
for brick walls ref. TDS90000. For plaster board or
other hollow walls order ref. TDS90000PB.
To be placed in vertical position but can also be
placed in horizontal position.
34
Update May 2013
Input Interface
To change the orientation after installation, place a
flat screw driver in the provided slot at the back of
the housing.
Flush mounting
Use Flush mounting box TDS90030 for flat
mounting. For hollow walls this has to be
combined with TDS90031.
Rem.: Normal operation of the temperature sensor
will be disturbed with flush mounting.
Connections:
On-wall mounting
Use the TDS90035 on-wall box in case of
concrete, marble,
walls, if the standard in-wall
solution is not possible.
AUTOBUS
AUTOBUS connector set supplied with this unit.
IR-link
On the AUTOBUS connection (green wire).
Power Consumption:
Max. 105 mA
Dimensions:
90W x 140H x 11 thickness on wall (mm)
Net | Gross Weight:
0,320 kg |0,400 kg
TELETASK Data Sheet EN
35
Update May 2013
Input Interface
Schematic Drawings:
TELETASK Data Sheet EN
36
Update May 2013
Input Interface
TDS12064xx
AURUS-TFT 4.3”
The TELETASK AURUS-TFT features a 4.3” color wide screen touch panel
with LED backlighting. Connection to AUTOBUS makes it a full featured
central control panel, including IP camera view due to the Ethernet
connection. In combination with the TELETASK DECT wireless phone
(TDS20110), this touch screen also becomes an indoor unit of your analogor IP- door video phone system.
AURUS-TFT 4.3” is a capacitive touch screen on 100% glass front plate,
available in a variety of colors. The printing is ceramic hardened at 800°C
and full sun- resistant for decades.
Full control of all Home Automation functions on a small but very powerful
touch screen.
The slick design allows the AURUS-TFT 4.3” to be built into a single wall
box and can be exchanged with the other AURUS- family members at any
time the customer want. Flush mounting also possible (TDS90030).
Application:
Characteristics:
Settings:
Installation:
TELETASK Data Sheet EN
Build-in touch screen used to control all home
automation function, including camera & video
solutions.
Front panel
Full glass front. Hardened glass in different
available colors.
Display
4,3” Wide screen (QWVGA 480x272, 16K colors),
full colour TFT LCD with LED backlighting.
Touch
Full touch screen. Unlimited buttons &
configurations.
IR
Build-in IR receiver.
Order ref.
TDS12064BL
TDS12064WH
TDS12064LG
TDS12064AU
Power
No external power supply needed.
Cleaning
Use only dry microfiber cloth. Never use liquids or
solvents!
Configuration
Via PROSOFT Suite 3.3 or higher.
AUTOBUS address
Via AURUS-TFT graphical user interface
(“configuration” menu). The AURUS-TFT uses only
1 AUTOBUS adress.
Technical code = 09876
Jumpers
Terminating resistor. To be used when the interface
is last interface on the AUTOBUS cable.
Standard mounting
To be mounted horizontal with included wall bracket
in about any standard single wall box.
Or order the TELETASK standard single wall box
for brick walls ref. TDS90000. For plaster board or
other hollow walls order ref. TDS90000PB.
Flush mounting
Use Flush mounting box TDS90030 for flat
mounting. For hollow walls this has to be combined
with TDS90031.
37
Black
White
Aluminium grey
Gold
Update May 2013
Input Interface
Connections:
On-wall mounting
Use the TDS90035 on-wall box in case of
concrete, marble,
walls, if the standard in-wall
solution is not possible.
Height
Centre of the AURUS-TFT = length user - 25cm.
AUTOBUS
By enclosed AUTOBUS connector set.
IR-link
On the AUTOBUS connection (green wire).
Ethernet
By means of a RJ45 connector (only needed to
display camera’s) .
Power Consumption:
150mA max.
Dimensions:
140 W x 90 H x 18 D (mm)
Net | Gross Weight:
0,250 kg | 0,350 kg
Operation range:
Temperature
0°C to 30°C max.
Relative humidity
5% to 80% at 25°C (no humidity/condense)
IP protection rate:
TELETASK Data Sheet EN
IP20
38
Update May 2013
Input Interface
Schematic Drawings:
TELETASK Data Sheet EN
39
Update May 2013
Input Interface
TDS12051
MAIOR 10” Color touch screen
The TELETASK MAIOR touch screen is both large and compact. It is the
perfect mix to have a compact touch screen with features usually only
available on large touch screens. The unit is a full featured X86 Windows
OS solid state computer with Intel Atom processor and solid state flash
memory.
It is made to run TELETASK GUI+ graphical user interface, which contains
all necessary software functions. Due to GUI+ all Home Automation
features are available, including VoIP door phone interface (optional
hardware components apply).
Application:
Characteristics:
Settings:
It is made to run TELETASK GUI+ graphical
user interface, which contains all necessary
software functions.
General
X86 Windows solid state computer.
Processor
Intel Atom N450 1,66 GHz with integrated
GMA3150 Graphics controller.
Memory
4GB SSD (Solid State flash disk).
1GB DDR2 SDRAM.
Display
10,1” widescreen LED backlight TFT.
WSVGA 1024x600.
Multimedia
Speaker and microphone included with echo
cancellation.
User Interface
TDS15105 GUI+ (included)
Configuration
Via PROSOFT Suite 3.2 or higher.
DoIP
IP connection to DoIP Central Unit
Installation:
Connections:
Wall box TDS ref TDS90055
IP
RJ-45 Connection to LAN network.
USB
3x USB 2.0 (2x front accessible, 1x rear)
Power
220V
Power Consumption:
Dimensions:
Net | Gross Weight:
Max. 15 Watt (100 to 240VAC, 50Hz to 60Hz)
Unit + Front plate
333 B x 200 H x 80 D (mm)
Wall box (TDS90055)
315 B x 182 H x 80 D (mm)
Unit + front plate
5 kg | 6,5 kg
Wall box (TDS90055)
2,5 kg | 3 kg
Packaging content:
TELETASK Data Sheet EN
TDS12051 MAIOR 10” + front panel
40
Update May 2013
Input Interface
TDS15105 GUI+ licence included (preinstalled)
IP protection rate:
Operation range:
IP20
Temperature
0°C to +30°C max.
Relative humidity
5% to 80% at 25°C (no humidity/condense)
Limited warranty:
2 years
Schematic Drawings:
TELETASK Data Sheet EN
41
Update May 2013
Input Interface
TDS12052
MAIOR 15” Color touch screen
The TELETASK MAIOR touch screen is both large and compact. It is the
perfect mix to have a compact touch screen with features usually only
available on large touch screens. The unit is a full featured X86 Windows
OS solid state computer with Intel Atom processor and solid state flash
memory.
It is made to run TELETASK GUI+ graphical user interface, which contains
all necessary software functions. Due to GUI+ all Home Automation
features are available, including VoIP door phone interface (optional
hardware components apply).
Application:
Characteristics:
Settings:
It is made to run TELETASK GUI+ graphical
user interface, which contains all necessary
software functions.
General
X86 Windows solid state computer.
Processor
Intel Atom N450 1,66 GHz with integrated
GMA3150 Graphics controller.
Memory
4GB SSD (Solid State flash disk).
1GB DDR2 SDRAM.
Display
15,6” widescreen LED backlight TFT.
WXGA (1366x768).
Multimedia
Speaker and microphone included with echo
cancellation.
User Interface
TDS15105 GUI+ (included)
Configuration
Via PROSOFT Suite 3.2 or higher.
DoIP
IP connection to DoIP Central Unit
Installation:
Connections:
Wall box TDS ref TDS90056
IP
RJ-45 Connection to LAN network.
USB
4x USB 2.0 (2x front accessible, 2x rear)
Power
220V
Power Consumption:
Dimensions:
Net | Gross Weight:
Max. 25 Watt (100 to 240VAC, 50Hz to 60Hz)
Unit + Front plate
510 B x 306 H x 80 D (mm)
Wall box (TDS90056)
492 B x 288 H x 80 D (mm)
Unit + front plate
6,2 kg | 7,9 kg
Wall box (TDS90056)
3 kg | 3,5 kg
Packaging content:
TELETASK Data Sheet EN
TDS12052 MAIOR 15” + front panel
42
Update May 2013
Input Interface
TDS15105 GUI+ licence included (preinstalled)
IP protection rate:
Operation range:
IP20
Temperature
0°C to +30°C max.
Relative humidity
5% to 80% at 25°C (no humidity/condense)
Limited warranty:
2 years
Schematic Drawings:
TELETASK Data Sheet EN
43
Update May 2013
Input Interface
TDS12053
MAIOR 19” Color touch screen
The TELETASK MAIOR touch screen is both large and compact. It is the
perfect mix to have a compact touch screen with features usually only
available on large touch screens. The unit is a full featured X86 Windows
OS solid state computer with Intel Atom processor and solid state flash
memory.
It is made to run TELETASK GUI+ graphical user interface, which contains
all necessary software functions. Due to GUI+ all Home Automation
features are available, including VoIP door phone interface (optional
hardware components apply).
Application:
Characteristics:
Settings:
It is made to run TELETASK GUI+ graphical
user interface, which contains all necessary
software functions.
General
X86 Windows solid state computer.
Processor
Intel Atom N450 1,66 GHz with integrated
GMA3150 Graphics controller.
Memory
4GB SSD (Solid State flash disk).
1GB DDR2 SDRAM.
Display
18,5”widescreen LED backlight TFT.
WXGA (1366x768).
Multimedia
Speaker and microphone included with echo
cancellation.
User Interface
TDS15105 GUI+ (included).
Configuration
Via PROSOFT Suite 3.2 or higher.
DoIP
IP connection to DoIP Central Unit
Installation:
Connections:
Wall box TDS ref TDS90057
IP
RJ-45 Connection to LAN network.
USB
4x USB 2.0 (2x front accessible, 2x rear)
Power
220V
Power Consumption:
Dimensions:
Net | Gross Weight:
Max. 35 Watt (100 to 240VAC, 50Hz to 60Hz)
Unit + Front plate
600 W x 345 H x 80 D (mm)
Wall box (TDS90057)
582 W x 327 H x 80 D (mm)
Unit + front plate
7,1 kg | 8,8 kg
Wall box (TDS90057)
3,8 kg | 4,4 kg
Packaging content:
TELETASK Data Sheet EN
TDS12053 MAIOR 19” + front panel
44
Update May 2013
Input Interface
TDS15105 GUI+ licence included (preinstalled)
IP protection rate:
Operation range:
IP20
Temperature
0°C to +30°C max.
Relative humidity
5% to 80% at 25°C (no humidity/condense)
Limited warranty:
2 years
Schematic Drawings:
TELETASK Data Sheet EN
45
Update May 2013
Input Interface
TDS12142
Proximity reader
The TELETASK proximity reader is an AUTOBUS interface for secured
wireless access control. This means a higher user friendliness thanks to
the fact that there is no precise handling needed to put the card in the
reader to make a necessary hardware contact. Hold the proximity card or
key holder TAG in front of the proximity reader to get access and/or
generate any other domotic function.
Thanks to the integration with the domotics system, the function is not
limited to the opening of a door, but can be combined with any other
domotics function (when entering the house, the door opens, the lights are
activated, the temperature settings can be changed, music starts playing,
etc...
Application:
For a safe contactless access control in combination with
any other control of a domotic function. Cards and key
holder TAGs can have limited access: between certain
hours of the days, only on certain days or any other
condition that you want.
Characteristics:
The proximity reader fits the needs and protection for
indoor installation. In outdoor application it is necessary
to seal the back with silicone (between back and wall)
against water infiltration at the AUTOBUS connector.
Adding, deleting and changing the access parameters of
each proximity card/TAG is possible using PROSOFT
V2.74 or higher (with the integrated CARDSOFT
software).
Settings:
Cleaning
Use only dry microfiber cloth. Never use liquids or
solvents!
AUTOBUS address
Through rotary switches Tens + Units
Programming
Proximity reader With PROSOFT V2.74 or higher
Proximity card
With the reader
LED
TDS12142 Connected: LED blinks slowly
Connection error: LED blinks fast
Card or TAG detected: LED will be ON for 2 sec.
Installation:
Connections:
On-wall mounting in front of any wall box or hole, to
contain the AUTOBUS cable and connector.
When the proximity reader is placed in unsheltered
outside locations it is necessary to add silicone between
the wall and the housing as shown in the mounting
drawing.
AUTOBUS
Power Consumption:
Through enclosed AUTOBUS connector
Max. 75 mA
Dimensions:
TDS12142
TDS12142GL
115 H x 115 W x 15 D (mm) (on top of the wall)
115 H x 115 W x 18 D (mm) (on top of the wall)
Net | Gross Weight :
TDS12142
TDS12142GL
0,137 | 0,247 kg
0,147 | 0,257 kg
TELETASK Data Sheet EN
46
Update May 2013
Input Interface
Schematic Drawings:
TELETASK Data Sheet EN
47
Update May 2013
Input Interface
INSTALLATION
DISASSEMBLY
TELETASK Data Sheet EN
48
Update May 2013
Input Interface
TDS12116
Digital input interface with 16 input
Interface to be connected on the AUTOBUS. On the interface up to 16
voltage free input contacts can be connected.
Examples: push buttons, window contacts, motion- and presence sensors
(with voltage free contact), output contacts of a security system, etc...
The TDS12116 is also an ideal interface for energy metering in combination
with meters with a pulse output.
For example: electricity-, water-, gas meters with an impulse output.
Application:
Characteristics:
Interface for the connection of 16 digital inputs on
the AUTOBUS.
Inputs
For 16 voltage free input contacts.
The output impedance of the connected device
must be ≤ 5kΩ when closed.
Max. 5 pulses/sec.
Remark: Use PROSOFT V3.2.0.76 and TDS12116
firmware 112 or higher for the pulse counter
function.
Settings:
Heart beat LED
This LED reflects the working of the processor, the
change of an input status and the communication
with AUTOBUS and the central unit.
Functions
With PROSOFT Suite
AUTOBUS address
Trough rotary switches Tens + Units This interface
uses 2 addresses (the hardware set address and
the following address)
Installation:
Connections:
DIN-rail mounting
AUTOBUS
AUTOBUS connector set + patch cable supplied
with this unit
Earth
Through fast-on; very important
Power Consumption:
Dimensions:
Max. 28 mA
Dimensions
72 W x 90 H x 60 D (mm)
4 units
Net | Gross weight:
0,220 | 0,236 kg
IP protection rate:
IP20
Operation range:
TELETASK Data Sheet EN
Temperature
0°C to +50°C max.
Relative humidity
5% to 80% at 25°C (no humidity/condense)
49
Update May 2013
Input Interface
Schematic Drawing:
TELETASK Data Sheet EN
50
Update May 2013
Input Interface
TDS12124
COOKIE Digital Input Interface
Miniature input interface with four voltage free contact inputs. These can be
used to connect push buttons, window contact etc. (any brand). The
interface is small enough to be built in any type of wall box and is to be
connected on the TELETASK AUTOBUS.
Application:
Built in input interface to connect up to four voltage
free contacts
Characteristics:
Inputs
4 x voltage free contacts (low frequency; max. 1Hz)
Settings:
Functions
With PROSOFT Suite
AUTOBUS address
Trough rotary switches “Tens” + “Units”
Jumper
Terminating resistor (standard OPEN)
Installation:
Connections:
Built-in in walls behind standard push buttons
AUTOBUS
By enclosed AUTOBUS connector set
Inputs
Through colored wires (length=15cm, length
max=20cm, colour codes: Black (Common), Brown
(input 1), Orange (input 2), Yellow (input 3), Purple
(input 4)
Power Consumption:
Max. 0,025 A
Dimensions:
42 W x 42 H x 16 D (mm) + cabling
Net | Gross weight:
0.018 kg | 0.040 kg
TELETASK Data Sheet EN
51
Update May 2013
Input Interface
Schematic Drawing:
TELETASK Data Sheet EN
52
Update May 2013
Input Interface
TDS12125
COOKIE Digital input interface with LED-feedback
Miniature input interface with four voltage free contact inputs. These can be
used to connect push buttons, window contacts etc. (any brand). The
interface is small enough to be built in any type of wall box and is to be
connected on the AUTOBUS. This COOKIE has the option to connect
feedback LED’s and an IR receiver.
Application:
Characteristics:
Settings:
Built in input interface with feedback to connect up to
four voltage free contacts and up to 4 feedback
LED’s.
Inputs
Four voltage free contacts (low frequency; max 1Hz).
IR
Possibility to connect an IR receiver (optional
TDS12129 or TDS12131).
LED-outputs
Possibility to connect four low current LED’s. (Current
through LED’s is limited to 5mA.: no series resistor is
needed).
Functions
With PROSOFT Suite
AUTOBUS address Trough rotary switches “Tens” + “Units”
Jumpers
Terminating resistor (default OPEN)
Installation:
Connections:
Built-in in walls behind standard push buttons
AUTOBUS
By enclosed AUTOBUS connector set
Inputs
Through colored wires (length=15cm, length
max=20cm, colour codes: Black (Common), Brown
(input 1), Orange (input 2), Yellow (input 3), Purple
(input 4)
LED-outputs
Wire, min. 0,2 en max. 0,5 mm², length max=20cm.
12V LED’s can be powered by AUTOBUS (red wire).
24V should be powered by extra power supply, use
yellow wire from AUTOBUS, length max=50m. See
schematic drawing in this datasheet.
IR-link
By green wire on the AUTOBUS. (wire, min. 0,2 and
max. 0,5 mm²)
Power Consumption:
Max. 0.05 A
Dimensions:
42 W x 42 H x 22 D (mm) + cabling
Net | Gross weight:
0.022 kg | 0.042 kg
TELETASK Data Sheet EN
53
Update May 2013
Input Interface
Schematic Drawing:
TELETASK Data Sheet EN
54
Update May 2013
Input Interface
TDS12129
Infrared receiver
Optional IR-receiver to be used with the built in versions of the digital
interface TDS12125.
Application:
Characteristics:
To provide the digital interfaces TDS12125 with IR
Remote control functions.
IR receiver
36 kHz
Settings:
None
Installation:
To be placed behind an IR transparent window.
Cable connection 3m (may not be extended).
Connections:
On the digital input interface (+5V, IR in and OV)
(see drawing).
Power Consumption:
Not applicable
Dimensions:
20 W x 25 H x 14 D (mm)
Net | Gross weight:
0,040 kg | 0,050 kg
Schematic Drawing:
TELETASK Data Sheet EN
55
Update May 2013
Input Interface
TDS12309
Analogue input interface with 8 TELETASK inputs (0 – 10V)
Analog input interface to be connected to AUTOBUS, with eight analog
sensor inputs for temperature, humidity and light sensing.
Application:
Interface between AUTOBUS and TELETASK
sensors.
Characteristics:
Up to 8 TELETASK sensors can be connected.
Settings:
Functions
With PROSOFT Suite
AUTOBUS address
Trough rotary switches Tens + Units
Jumper
Terminating Resistor (stand. Off)
Installation:
Connections:
DIN-rail mounting
AUTOBUS
AUTOBUS connector set + patch cable supplied
with this unit
Shielding
Connect the shielding of the sensor cable to the
AUTOBUS shielding.
Inputs
by screw terminals, max 1mm²; always connect
each sensor with a separately shielded cable (three
wires). Connect the shielding with the AUTOBUS
shielding at the interface.
Maximum cable length between sensors and
interface is 50 meters.
Power Consumption:
52 mA
Dimensions:
72 B x 90 H x 60 D (mm)
4 units
Gross weight:
0,180 kg
IP protection rate:
IP20
TELETASK Data Sheet EN
56
Update May 2013
Input Interface
Schematic Drawing:
TELETASK Data Sheet EN
57
Update May 2013
Input Interface
TDS12310
Universal analog input interface
AUTOBUS Interface with 8 inputs for universal analog sensors. Using this
interface you are able to integrate any industrial sensor like temperature
measuring for the sauna, water level measuring of the swimming pool, wind
metering with the TELETASK domotic system.
Signals 0-5V, 0-10V, 0-20mA, 4-20mA and TELETASK analog sensors are
applicable.
Application:
Used for domestic and office purposes. Measuring
analog parameters. This interface is not suited for
measurement or control of such processes, which
could lead to danger when controlling fails. Neither
is this interface suited for controlling industrial
processes.
Application example:
(1) A wind sensor measuring from 0V tot 10V.
Output, 0,7m/sec (2,52km/h) for 0V up to 40m/sec
(144km/h) for 10V .
(2) A rain water tank (content 10.000L) with an
ultrasonic sensor (4-20mA output), ex. Type
Sontay LS-UL3)
The total range of 10.000L divided with a resolution
of 720 steps, gives 10.000/720 = 13,9L (see table
below).
On the display of the LATUS-LCD there is a limit of
characters (6) which lead to the following result as
a maximum: 99999L.
Remark: This is only true when the signal has a
linear resolution with the tank content. This is
correct in case of a rectangle tank. When used with
a circular tank, the signal won’t be linear. In this
case it is advised to represent the value in percent
or meter.
IMPORTANT: Failure of the measurement (ex.
Wind sensor is broken or cables are cut) could
cause dangerous situations. For example, in case
of a wind speed sensor, if broken, your sunshades
won’t be withdrawn automatically by high wind
speeds. To prevent damage you will have to
withdraw the shades manually. TELETASK is in no
way responsible for damage caused by bad
working or broken components of the system.
Display possibilities:
On the LATUS-LCD (TDS12015xx) there is a
maximum of digits available for text to be
displayed: 6 digits including the optional “-“, “.” Or
unit symbol.
Ex. “999999”, “-16.4C”, “-16.66”, “105kmh”
Characteristics:
Up to 8 universal analog sensors can be
connected:
TELETASK Data Sheet EN
58
Update May 2013
Input Interface
TELETASK analog sensors (TDS12250xx/
12260xx/ 12270xx) and sensors with 0-5V, 0-10V,
0-20mA, 4-20mA output signals.
Input impedance 0-5V: 15kOhm
Input impedance 0-10V: 25kOhm
Settings:
Functions
Via PROSOFT (starting from 3.0.0.70)
AUTOBUS address
Via rotary switches ‘Tens’ + ‘Units’:
Jumper
Terminating Resistor (default OPEN)
Input
For every input you have to set two dip switches to
define the type of sensor which is connected with
that particular analog TDS input.
Consult the schematic drawing for the correct dip
switch settings.
!!! Be very careful and secure with the dip switch
setting because a wrong sensor type setting
causes improper functioning or even can it damage
the input.
Installation:
Connections:
DIN-rail mounting
AUTOBUS
AUTOBUS connector set + patch cable supplied
with this unit
Inputs
Screw terminals for wires max 1mm²; always
connect each sensor with an individual shielded
cable (three wires) only. Connect shielding with the
AUTOBUS shielding at the interface.
Maximum cable length between sensors and
interface is 50 meters, except for 0-20A and 420mA where it is 100 meter.
Power Consumption:
Max. 52 mA
Dimensions:
72 B x 90 H x 60 D (mm)
4 units wide
Gross Weight:
0,180 kg
IP protection rate:
IP20
Possible error messages on
displays (ex. LATUS-LCD
Touch panel):
TELETASK Data Sheet EN
“data?”
No information from interface (check AUTOBUS
connection)
“sens?”
Sensor not connected (TDS temperature & TDS
humidity only)
“wait.”
Interface is calculating first measurement
“loop?”
Broken cable (4-20mA only)
“pow?”
Sort circuit in the power of the sensors
“error”
Wrong signal (ex. Wrong sensor)
59
Update May 2013
Input Interface
TABLE OF MEASUREMENT RESOLUTION AND PRECISION
Signal:
0 – 5V
0 – 10V
0 – 20mA
4 – 20mA
TDS Temp sensor
TDS Light sensor
TDS Humidity sensor
Resolution:
1024
1024
900
720
1200 (0,1°C)
200
100 (1%RH)
Precision(@25°C):
± 3%
± 3%
± 3%
± 3%
± 1%
± 10%
± 5%
Non Linearity:
< ±1%
< ±1%
< ±1%
< ±1%
< ±1%
< ±1%
< ±2%
Schematic Drawing:
TELETASK Data Sheet EN
60
Update May 2013
Input Interface
TDS12250xx
Temperature sensor
This temperature sensor is to be used to control heating and cooling. It can also
be used only to indicate the environment temperature on a display.
Application:
Measuring room temperatures.
One sensor is to be used per temperature zone.
One sensor can be used for both cooling and heating in
the same temperature zone.
To be connected to a TELETASK “analog” input.
Characteristics:
Temperature measure range: -40°C > +80°C
Sensor to be connected with 3 wires
TDS12250WH – white front
TDS12250PN - pearl-nickel silver gray front
Order numbers
Settings:
None
Installation:
Horizontal mounting on a flat surface, about 1.5 meter
height.
Sensor can be placed in front of the wall or inside the
wall using 45x45mm or 55x55mm frames.
Ideal build-in height: 1,5m – 10 to 15 cm away from any
door.
Remark: Make sure that eventual draught in the wall
box does not influence the temperature measurement.
To avoid draught in the wall box, close the flexible tube
of the wire with silicone and isolate the wall box.
Remark: When the sensor is built in the wall the
measurement can be influenced by the temperature of
the concrete wall.
Do not mount to close to a door opening, (minimum
15cm), to a window, on an outdoor wall or to a
heating/cooling source.
Min. wire section: 0.25mm²
Connections:
By shielded cable, containing three wires
(+12V/0V/signal). When more than one sensor is
connected with the same cable, the signals should be
shielded separately.
Maximum cable length is 50m.
Connect the sensor cable shielding to the AUTOBUS
shielding.
By means of three screw terminals.
Power Consumption:
Max. 4 mA
Dimensions:
55 W x 55 H x 21 D (mm)
Gross weight:
0,040 kg
TELETASK Data Sheet EN
61
Update May 2013
Input Interface
Schematic Drawing:
TELETASK Data Sheet EN
62
Update May 2013
Input Interface
TDS12260xx
Humidity sensor
This humidity sensor is to be used to indicate and/or to control humidity levels.
Application:
Measuring humidity levels between 20%RH and
95%RH
RH: relative humidity
To be connected to a TELETASK “analog” input.
Characteristics:
Sensor to be connected by 3 wires.
TDS12260WH – white front
TDS12260PN - pearl-nickel silver gray front
Order numbers:
Settings:
None
Installation:
Horizontal mounting on a flat surface, about 1.5 meter
height.
Sensor can be placed in front of the wall or inside the
wall using 45x45mm or 55x55mm frames.
Ideal build-in height: 1,5m – 10 to 15 cm away from any
door.
Remark: When the sensor is built in the wall the
measurement can be influenced by the humidity level of
the concrete wall.
Do not mount to close to a door opening, (minimum
15cm), to a window or to a heating/cooling source.
Min. wire section: 0.25mm²
Connections:
By shielded cable, containing three wires
(+12V/0V/signal). When more than one sensor is
connected with the same cable, the signals should be
shielded separately.
Maximum cable length is 50m.
Connect the sensor cable shielding to the AUTOBUS
shielding.
By means of three screw terminals.
Power Consumption:
Max. 4 mA
Dimensions:
55 W x 55 H x 21 D (mm)
Gross Weight:
0,040 kg
Operation range:
TELETASK Data Sheet EN
Temperature
0°C to +80°C max.
63
Update May 2013
Input Interface
Schematic Drawing:
TELETASK Data Sheet EN
64
Update May 2013
Input Interface
TDS12270xx
Light sensor
This light sensor is to be used to sense for light levels. Depending of the
placement the sensor can be used to control indoor or outdoor functions (lights).
The sensor can be used to control curtains, shutters, lights, etc... Or to sense if a
‘dark’ or ‘light’ or ... Situation is true.
Application:
For indoor and outdoor applications
To be used to sense the environmental light level.
To be connected to a TELETASK “analog” input.
Characteristics:
Sensor with three wire connection
Mounted in a IP44 housing (for indoor and outdoor use)
Temperature range: -20°C to +50°C
Twilight
0,1 > 1584 lux
General purpose
1 > 15848 lux
Sun
10 > 99999 lux
Range
Settings:
Order numbers
TDS12270WH – white front
TDS12270PN - pearl-nickel silver gray front
Jumpers
JP1 + JP2: to define the sensor as a sun-, regulate- or dusk
sensor
Installation:
To be mounted on a flat surface, protected for outdoor influences
as rain and snow or built in the wall using 45x45mm or 55x55mm
frames.
Ideal build-in height: 1,5m – 10 to 15 cm away from any door.
Anyway, depending the application you should consider the
placement to be protected against direct sun light or not (ex:
when the light sensor is active in the sun sensor mode, it is not
placed in the shelter of the gutter).
Be aware that there are differences between summer and winter
periods; the sun stand high and low.
If the sensor controls a light source, the placement should be
done in a way that the controlled light is not influencing the
sensor in no way.
Min. wire section: 0.25mm²
Connections:
By shielded cable, containing three wires (+12V/0V/signal). When
more than one sensor is connected with the same cable, the
signals should be shielded separately.
Maximum cable length is 50m.
Connect the sensor cable shielding to the AUTOBUS shielding.
By means of three screw terminals
Power Consumption:
Max. 4 mA
Dimensions:
55 W x 55 H x 21 D (mm)
Gross Weight:
0,050 kg
TELETASK Data Sheet EN
65
Update May 2013
Input Interface
Schematic Drawing:
TELETASK Data Sheet EN
66
Update May 2013
Input Interface
TDS12280
Water (leak) sensor
This water sensor is to be used to detect water caused by an accidental leak.
Example: In the storage the sensor detects unwanted water near the washing
machine.
The sensor is mounted close to the floor.
The sensor is connected to the TELETASK system using a digital input on the
MICROS central unit or the digital input interfaces (TDS10012, TDS12116,
TDS12124 of TDS12125).
The sensor consists of a normal closed contact. At detection of water the
contact opens.
Application:
To be used to detect water caused by a leak.
Only to be used in indoor application >0°C.
Characteristics:
Sensor with four wire connection.
Sensor is cast in a waterproof IP65 plastic housing.
Settings:
None
Installation:
To be mounted with 2 screws on the wall at the height
were the water level should be measured.
Connections:
Power Supply
+12V
Red Wire
-0VBlack Wire
External Power supply 12V Dc is needed.
TELETASK input
Connect the white and green wire with a digital input
on the central unit TDS10012 or the digital input
interfaces TDS12116, TDS12124 of TDS12125.
Power Consumption:
Max. 10 mA
Dimensions:
64 W x 16 H x 14 D (mm)
Gross Weight:
0,045 kg
Limited warranty:
2 years
Schematic Drawing:
TELETASK Data Sheet EN
67
Update May 2013
Input Interface
TDS12285
Rain detector-meter
The TDS12285 rain detector-meter can be used for rain detection for the control of
blinds, windows, etc. to protect them from the rain. It can also be used for
indication of rain fall on a graphical display or PC. Graphs can be generated for
real time indication, per hour, per day, per week and per month.
9-24V (AC or DC) power is needed and the output is defined by an internal change
over (CO) contact. The contact switches immediately when rain is detected
(standard setting = ‘very sensitive’). The contact can be connected to any control
system. In case of integration with TDS, the contact can be connected to a digital
input of the TDS system (MICROS+,TDS12116,..).
The TDS12285 also contains an internal light sensor for full automated outdoor
shade control: when set in this mode, the outdoor (sun)shade will be controlled
when rain is detected or the sensed light is below 2000 Lux. In this case a motor
output (TDS13524 or TDS13525) is needed to control the shade motor. The use of
an additional wind sensor can be advised in such cases.
Application:
Characteristics:
Rain detection - metering (in combination with internal light sensor).
General
Modes:
1a) Rain detection (default)
1b) Rain detection + light sensor (2000 Lux fixed)
2) Rain metering (=Tipping Bucket)
Maintenance TELETASK recommend annual treatment of the rain detector lens with a
rain repellant. This prevents a condition where the TDS12285 reads high
values because water droplets stuck on the detector get blown by the wind,
causing high readings. With a rain repellant, larger droplets run off.
Settings:
DIP
switches
Default factory setting dip switch 1 -> 8 = 00101000 (rain detection – very
sensitive). See tables below for an overview of the modes and settings.
MODE 1
Rain detection
Application: It’s raining.
Rain detection mode turns on the relay to indicate that it is raining. Use this
mode to control equipment that should be controlled, enabled, open, closed,
and so forth depending on whether or not it is raining. The output turns on
when a given rate of rainfall is detected, and turns off after it has dropped
below a threshold.
Behaviour
Very sensitive – first detected raindrop
Sensitive – turn on with very light
rainfall (0.25mm per hour)
Medium Sensitivity – turn on with
medium rain (0.6mm per hour)
Low Sensitivity– turn on in heavy
rainfall (2.5mm per hour)
Output off when rain stops
Output Monostable Extended by 15
minutes
No Dark-Detect – Normal operation
Dark Detect
1
2
0
0
1
0
0
1
1
1
X
X
X
X
Switch
3 4 5 6
X
7
8
0
0
X
1
0
0
1
X
X
0
1
Each of the sensitivity levels (set by switches 1 and 2) provides different trip
and release points. There is much hysteresis built in, but real rain fall rates
TELETASK Data Sheet EN
68
Update May 2013
Input Interface
typically fluctuate, even in what you may perceive as a “steady rain”, so
expect the output to turn on and off. The output will remain on for between
about 30 seconds and 5 minutes after the last detected rain drop,
depending on sensitivity setting and actual conditions.
To prevent some piece of equipment from turning constantly on and off (or
opening / closing, etc.) you can enable the Monostable extend (Switch 3).
That will hold the output on for 15 minutes after the rain has ceased.
Dark Detect-- if enabled, the output will also turn on when the ambient light
drops below about 2000 lux. This feature may be used to retract a sunshade when it is dark.
MODE 2
Rain metering (Tipping Bucket)
Application: e.g.: bar graph display on AURUS-TFT.
In tipping bucket mode, the TDS12285 effectively emulates a tipping bucket
of the specified size. For example, if the DIP switches are set to a tipping
bucket mode with a bucket size of 0.01mm, then the output will pulse ON
for 50mS each time 0.01mm of water accumulates, just as a tipping bucket
would. This can be externally totalized, and used to measure rainfall rates.
For you information:
Soft rain
Day of light rain
Gust of rain
Heavy thunderstorm
= 2mm/h
= 4mm/day (=0,16mm/h)
= 5mm/min (=300mm/h)
= 50mm/h
1mm rainfall
= 1litre per m²
Imperial bucket sizes are available as well.
inch
mm
Behaviour
Bucket Size = 0.2mm (small
rainfall will not be detected)
Bucket Size = 0.01mm
(recommended)
Bucket Size = 0.001mm (heavy
rainfall we be less accurate)
Bucket Size = 0.01inch (small
rainfall will not be detected)
Bucket Size = 0.001inch
(recommended)
Bucket Size = 0.0001inch (heavy
rainfall we be less accurate)
1
2
Switch
3 4 5 6
0
0
1
1
0
1
0
1
1
0
0
0
1
0
0
0
1
0
0
0
0
7
8
0
0
Configure in PROSOFT in combination with TDS12116 to show graphs.
See setting below as example (Bucket Size = 0.01mm).
First enable button: ‘Use as pulse counter sensor’
TELETASK Data Sheet EN
69
Update May 2013
Input Interface
Installation:
Mounting
Mount the rain detector where it gets a clear measurement of precipitation–
away from overhangs, etc.
The mounting arm is designed to fit over a 19mm wide bracket. Two 6mm
holes are placed 19mm apart.
The rain detector can also be mounted on top of a tube (cut off the
mounting arm and glue on the tube with water-resistant silicon or similar).
Connections:
Inputs
9 – 24 VDC/AC (DC reverse polarity allowed).
Outputs
1 Change-Over contact (Normal Open and Normal Closed contact).
Max. load 1A, 24 VDC.
Remark:
If you use ‘rain detection mode’, TELETASK strongly recommends
Normal Closed contact for safety reasons. This has the advantage in
case of cable rupture, the protection function will be activated.
Important remark:
TELETASK does not claim this rain detector is perfect. Optical
raindrop sensing has lots of advantages but also its limits.
Remark:
Use cable rated for outdoor (high-UV) use.
Power Consumption:
20 mA nominal (no outputs on, not raining).
55 mA with output on (with heater on at 24VDC).
Dimensions:
70 W x 75 H x 120 D (mm)
Net | Gross Weight:
0,125 kg |0,200 kg
Packaging content:
1x TDS12285 detector
1x Installation manual
IP protection rate:
Operation range:
Limited warranty:
TELETASK Data Sheet EN
IP65
Temperature -40°C to +60°C max. (rain detection 0°C to + 60°C)
2 years
70
Update May 2013
Input Interface
Schematic Drawing:
TELETASK Data Sheet EN
71
Update May 2013
General Interfaces
TDS14000
TELETOUCH telephone interface
Two wire AUTOBUS telephone interface.
Every (DTMF) telephone can be used as an 8 button touch panel (button 1
to 8). In case the TELETOUCH is connected to an external phone line, the
user need to enter a password to get access to the system. This only
occurs when the number of rings is higher than 0.
The functions and the entrance message are in a user friendly and easy
way changeable. This makes the TELETOUCH adaptable to the user
needs and wishes.
Application:
Interface to be connected on the AUTOBUS
To be used in combination with internal and
external telephones.
Characteristics:
Remote control and activation of 8 domotics
functions.
Functions are easy adaptable
Access with password (if number of rings is higher
than 0)
Feedback through speech.
Settings:
Functions:
With PROSOFT Suite
AUTOBUS address:
through rotary switches Tens + Units
Installation:
Connections:
DIN rail mounting.
To be installed in the direct neighbourhood of the
telephone line connection.
AUTOBUS:
AUTOBUS connector set + patch cable supplied
with this unit
Analogue line:
through RJ11 connector
Power Consumption:
Max. 45 mA
Dimensions:
80 W x 90 H x 60 D (mm) 4.5 units wide
Gross Weight:
0,320 kg
IP protection rate:
IP20
TELETASK Data Sheet EN
72
Update May 2013
General Interfaces
Schematic Drawing:
TELETASK Data Sheet EN
73
Update May 2013
Graphical User Interfaces
TDS15101
iSGUI for Smartphones, Tablets and PC
This software license provides the possibility to access all of your domotics
functions from a Smartphone (Android, iOS, Windows Mobile 6.X), Tablet
(Android, iOS) or PC (Windows, Mac): lights, heating/cooling, doors, gates,
curtains, shutters,
moods, motors, sensors, audio, and IP camera’s.
The configuration of the GUI screens is very easy. The software will copy all the
rooms & all functionalities directly and automatically from your nbt file. No extra
configuration is needed.
Application:
Characteristics:
Settings:
TELETASK Data Sheet EN
Remote control of all functions using a dedicated device.
System requirements
Windows mobile 6.X (iSGUI V1):
• Compact.NET framework v2.0
iOS (iSGUI V1):
• iPhone with iOS 3.0 or higher
• iPod-touch with iOS 3.0 or higher
• iPad with iOS 3.0 or higher
iOS (iSGUI V2):
• iPhone 3GS or higher
• iPod 3th generation or higher
• iPad 1 or higher
Android Smartphone or tablet (iSGUI V2):
• Adobe AIR compatible
• ARMv7 processor with vector FPU, minimum
550MHz, OpenGL ES 2.0, H.264 and AAC HW
decoders
Android™
2.2 or higher
•
• 256MB RAM
BlackBerry (iSGUI V2):
• BlackBerry OS 10
Windows PC (iSGUI V2):
• 2.33GHz or faster x86-compatible processor or Intel®
Atom™ 1.6GHz or faster processor for netbooks
• Microsoft® Windows® XP Home, Professional, or
Tablet PC Edition with Service Pack 3; Windows
Server® 2003; Windows Server® 2008; Windows
Vista® Home Premium, Business, Ultimate, or
Enterprise (including 64-bit editions) with Service
Pack 2; or Windows 7
• 512MB of RAM (1GB recommended)
MAC OS (iSGUI V2):
• Intel Core™ Duo or faster processor
• Mac OS X v10.6 or v10.7
• 512MB of RAM (1GB recommended)
Camera
For the camera function on the iSGUI, use IP Camera’s
that support ‘Motion JPEG’ (M-JPEG) video.
Configuration
Automatic configuration based on rooms and icons in the
.nbt file.
Manual configuration and manual fine-tuning of the
screen menu’s is also possible.
74
Update May 2013
Graphical User Interfaces
Installation:
Connections:
Use GUISOFT (PROSOFT Suite 3.1 software or higher)
For detailed information on how to make and install the
GUI for Smartphones files, see the installation manual
for TDS15101.
Activation
Online - www.teletask.eu. An activation file can be
downloaded if the following data is provided: the
License code, the type and serial number of the
Central Unit.
Test mode
Test mode available (without license) during maximum 3
days.
LAN
Through a Wi-Fi Access point or router with WIFI.
WAN
Through Wi-Fi hotspot or mobile data connection
(GPRS, EDGE, 3G, HSDPA ), secured with VPN
connection.
A mobile data subscription and router with VPN
technology are required. See for more detailed
information in the installation manual.
Package Dimensions:
175 W x 250 H x 3 D (mm)
Package Weight:
0,1 kg
Package content:
License code for iSGUI for Smartphone, tablet and PC.
Quick installation manual.
TELETASK Data Sheet EN
75
Update May 2013
Graphical User Interfaces
Schematic Drawing:
TELETASK Data Sheet EN
76
Update May 2013
Graphical User Interfaces
TDS15105
GUI+ (Software License)
This software license allows central access to all of your home automation
functions from any Windows XP/Vista/7 desktop, touch screen PC, laptop, tablet
or ultra mobile PC.
The GUI+ controls all domotic functions, in an intuitive manner, using floor
plans, photographs or schemes of your house/project. By “drag and drop” from a
library containing hundreds of icons, it is possible to create a beautiful graphical
user interface.
The application which can be installed on the target device (touch screen PC,
laptop, ) is free for download at www.teletask.eu and can be used in demomode for 3 days.
Application:
Local and remote control of all domotics functions using a desktop, a touch
screen PC, a notebook, a tablet or ultra mobile PC.
Characteristics:
For Windows XP / Windows Vista/7/8 (not RT).
Works in “full screen” or “window” mode.
License
The license provides one connection between a DOIP Central Unit and a
connected GUI+. This is independent from the device on which the GUI+
is running. The GUI can be installed on multiple devices but to use multiple
GUI’s at the same time, they will all need an individual license.
Data
Automatically loaded from Central Unit.
Camera
For the camera function on the GUI+, use IP Camera’s that support
‘Motion JPEG’ (M-JPEG) video. For any other types of camera, use the
browser function.
Browser
Dynamic HTML pages, e.g. camera's, weather forecast, traffic information,
e-mail, news channels, social network websites,
Charts
History of any relay, dimmer, motor, sensor or flag.
Settings:
Easy “drag and drop” configuration in PROSOFT Suite.
Installation:
By GUISOFT in PROSOFT Suite (starting from PROSOFT Suite 3.2 or
higher). For detailed information see the "technical handbook", section
"GUISOFT".
Connections:
Activation
Online - www.teletask.eu. An activation file can be downloaded if the
following data is provided: the License code, the type and serial number
of the Central Unit.
Test mode
Available (without activation) for a maximum of 3 days.
LAN
Through Ethernet or via a Wi-Fi Access point/router.
WAN
Through Ethernet, Wi-Fi hot spot or mobile data connection (GPRS,
EDGE, 3G, HSDPA, ), secured with a VPN connection. A mobile data
subscription and router with VPN technology are required. See technical
handbook, for more detailed information.
Package Dimensions:
175 W x 250 H x 3 D (mm)
Package Weight:
0,1 kg
Package content:
License code for GUI+.
TELETASK Data Sheet EN
77
Update May 2013
Graphical User Interfaces
Schematic Drawing:
TELETASK Data Sheet EN
78
Update May 2013
Graphical User Interfaces
TDS15100
GUI (Software License)
This software tool provides the possibility to have central access to all of your
domotic functions from any Windows XP/Vista desktop, laptop or ultra mobile
PC.
The GUI allows you to control all domotics functions, in an intuitive manner,
using floor plans, pictures or schematics of your house/project.
By “drag an drop” from a library with about 1000 icons it is possible to create a
beautiful graphical user interface.
This application is free for download at www.teletask.eu and can be used in
demo-mode for 3 days.
Permanent licence is provided when purchased.
Application:
Local and remote control of all domotics functions using a desktop,
laptop or ultra mobile PC.
Characteristics:
For Windows XP / Windows Vista.
Works in “full screen” or “window” mode.
The licence provides one connection between a DOIP Central Unit
(MICROS+ or NANOS) and the connected GUI. This is independent
from the device on which the GUI runs.
The GUI can easily be installed on multiple devices but in order to use
multiple GUI’s at the same time, they will all need an individual licence.
!!! IMPORTANT REMARK: for older systems with MICROS, COMPACT,
or PROJECT Central Units the licence depends on the device on which
the GUI was installed (PC)!
Camera
For the camera function on the GUI, use IP Camera’s that support
‘Motion JPEG’ (M-JPEG) video.
Settings:
Easy “drag and drop” configuration in PROSOFT Suite
Installation:
Via GUISOFT (starting from PROSOFT Suite 2.80.1
software version, or higher). For detailed information on how to generate
and install the necessary GUI files, see the installation manual.
Connections:
Activation
Online - www.teletask.eu. An activation file can be downloaded if the
following data is provided: the License code, the type and serial
number of the Central Unit.
Test mode
Available (without activation) for a maximum of 3 days.
LAN
Through Ethernet or via a Wi-Fi Access point/router..
WAN
Through Ethernet, Wi-Fi hot spot or mobile data connection (GPRS,
EDGE, 3G, HSDPA, ), secured with a VPN connection.
A mobile data subscription and router with VPN
technology are required. See for more detailed
information in the installation manual.
Package dimensions:
175 B x 250 H x 3 D (mm)
Package weight:
0,1 kg
Package content:
Licence code for GUI. Installation manual.
TELETASK Data Sheet EN
79
Update May 2013
Graphical User Interfaces
Schematical drawing:
TELETASK Data Sheet EN
80
Update May 2013
Graphical User Interfaces
TDS1511x
CONTROL TOWER Master or Client licenses
“CONTROL TOWER” is the perfect solution for managing and
safeguarding multiple buildings like houses, flats, offices, shops,
showrooms, service flats, hotel rooms, etc . This contains safeguarding
of technical alarms and the control of all available integrated home- and
building automation features. In other words, Control Tower enables you to
offer technical alarm management and additional services to the people
living or working in the connected buildings.
A project may contain up to 250 Clients (houses/buildings) and up to 6
online Master PC’s.
Application:
Local and remote control of houses/buildings using a Microsoft
PC.
Characteristics:
For Windows XP / Vista / 7 / 8 / 8 Pro (not Windows 8 RT). Works
in “full screen” mode.
License system
For every project, only one TDS15110 Master license is needed.
For every Client building (= nbt file) a TDS15111 Client license is
needed. Every Client can be real-time connected with up to 3
Master PC’s. If more than 3 real-time Masters are needed, a
second Client license is needed in every Client building.
Cameras
For the camera function on the CONTROL TOWER, use IP
Camera’s that support ‘Motion JPEG’ (M-JPEG) video. For any
other types of camera, use the browser function.
Browser
Dynamic HTML pages, e.g. camera's, weather forecast, traffic
information, e-mail, news channels, social network websites,
Settings:
Easy “drag and drop” configuration in PROSOFT Suite and the
CONTROL TOWER configurator.
Installation:
Connections:
TELETASK Data Sheet EN
By GUISOFT in PROSOFT Suite (starting from PROSOFT Suite
3.3.0.60 or higher) and the CONTROL TOWER configurator. For
detailed information see the "technical handbook", section
"CONTROL TOWER".
Activation
Online - www.teletask.eu. An activation file can be downloaded if
the following data is provided: the License code, the type and
serial number of the Central Unit.
Test mode
Available (without activation) for a maximum of 30 days for the
TDS15110 Master license (3 days for the TDS15111 Client
license).
LAN
Through Ethernet or via a Wi-Fi Access point/router.
WAN
Through Ethernet, Wi-Fi hot spot or mobile data connection
(GPRS, EDGE, 3G, 4G, HSDPA, ), secured with a VPN
connection. A mobile data subscription and router with VPN
technology are required. See technical handbook, for more
detailed information.
Secured
connection
TELETASK recommends the use of a VPN connection to the
individual buildings. A single VPN router is sufficient for a full
protected high speed communication. At CONTROL TOWER site,
81
Update May 2013
Graphical User Interfaces
a multi-VPN router is to be used. Such devices are available on
the ICT market as standard devices from different brands.
Package Dimensions:
175 W x 250 H x 3 D (mm)
Package Weight:
0,1 kg
Package content:
TDS15110
License code for CONTROL TOWER Master license.
TDS15111
License code for CONTROL TOWER Client license.
Schematic Drawing:
TELETASK Data Sheet EN
82
Update May 2013
Output Interfaces
TDS13500
Relay interface 8x16A (with manual control)
The TDS13500 is a ‘zero power consumption’ high contact rating output
interface to be connected on AUTOBUS. Each output contact has a
16A/230V rating and is during communication disruption on AUTOBUS to
be set manually.
Application:
Characteristics:
Settings:
To be used when AUTOBUS connection or high
power contacts are needed. The manual control of
the output contacts makes this interface attractive
to be used to control critical circuits (for example to
control some basic light circuits in the house).
General
8 single pole, normal open relays.
Switching power per relay output:
IN = 16A/230V (minimum load 5W)
IHI = 100A (see Remark: Inrush Currents)
Full manual control available.
The contacts remain in their position when power
(on AUTOBUS) fails.
Relay
Contact material AgCdO-AgNi
Max. switching power
4000 VA
Max. switching current 16 A
Mechanical life 10 000 000
Test voltage
4000 V eff. (coil-contact)
Test voltage
1000 V eff. (open contact)
Configuration
With PROSOFT, from version 2.50
AUTOBUS address
Through rotary switches ROT1 + ROT2
Jumpers
JP1:
Installation:
Connections:
terminating resistor (stand. Off)
DIN-rail mounting | 9 units
Central unit:
AUTOBUS connector set + patch cable supplied
with this unit
Contacts
Screw terminals; max. 4mm² (solid) or 2,5mm²
(stranded)
Power Consumption:
Max. 150 mA
Dimensions:
162 W x 90 H x 60 D (mm)
Gross weight:
0,560 kg
IP protection rate:
TELETASK Data Sheet EN
IP20
83
Update May 2013
Output Interfaces
Schematic Drawing:
TELETASK Data Sheet EN
84
Update May 2013
Output Interfaces
TDS13502
Relay interface 8x10A (with plug-in relays)
The TDS13502 relay interface to be connected to the AUTOBUS with 8
output contacts 10A/230V for general purpose ON/OFF or pulse control.
The internal relays are plug-in type, for easy replacement.
There is one common connection for every 4 contact outputs.
Application:
Relay interface 8x10A for ON/OFF/pulse control of
the connected device.
Characteristics:
General
8 single pole, normal open relays + common for
every contact outputs.
Switching power per relay output:
IN = 10A/250V
IHI = 65A (see Remark: Inrush Currents)
mono stable relays.
Contact is always open when not powered via
AUTOBUS
Settings:
Programming
As of PROSOFT 3.2.0.60 (earlier versions, program
as TDS13500)
AUTOBUS address
With rotary switches “Tens” + “Units”
Installation:
Connections:
DIN-rail mounting | 9 units
AUTOBUS
AUTOBUS connector set + patch cable supplied
with this unit
Contacts
Screw terminals; max. 4mm² (solid) or 2,5mm²
(stranded)
Power Consumption:
Max. 350 mA (all relays ON)
Dimensions:
162 W x 90H x 60 D (mm)
Net | Gross weight:
0,450 kg | 0,600 kg
IP protection rate:
IP20
TELETASK Data Sheet EN
85
Update May 2013
Output Interfaces
Schematic Drawing:
TELETASK Data Sheet EN
86
Update May 2013
Output Interfaces
TDS13524
Motor interface AC (4x350VA)
Motor interface to control up to 4 AC motors as there are for curtains,
shutters, sun blinds The interface is developed to be connected on the
AUTOBUS.
Max. 350VA motor (6A/240V AC in total)
Application:
Output interface for controlling low power 230V
motors for curtains, sun blinds The interface is
defined by a decentralized connection on the
AUTOBUS network
Characteristics:
4 motor controllers for 230V AC motors
maximum load: 4 x 350W
Settings:
Programming
With PROSOFT, from version 2.50
AUTOBUS address
With rotary switches Tens + Units
Installation:
Connections:
DIN rail mounting.
Note: AC motors should never be connected in
parallel.
AUTOBUS
AUTOBUS connector set + patch cable supplied
with this unit
Motor power supply
Input: 2 x 230V AC / 6A (max. 6A fuses)
Motor connections
Output: com. + left + right (4 x) 230V AC)
Power Consumption:
Max. 105 mA
Dimensions:
162 W x 90 H x 60 D (mm)
9 units
Gross Weight:
0,500 kg
IP protection rate:
IP20
TELETASK Data Sheet EN
87
Update May 2013
Output Interfaces
Schematic Drawing:
TELETASK Data Sheet EN
88
Update May 2013
Output Interfaces
TDS13525
Motor interface DC (4x2A)
The DC motor interface is designed to control DC motors, often found in
curtains, roof mounted sun blinds, small Venetian blinds, etc The
interface can control up to four DC motors with supply voltages from 12 and
24VDC. The interface is provided with short-circuit and overload protection.
The interface has a double AUTOBUS connection for easy and fast
cascading of AUTOBUS rail mount interfaces.
Nominal motor current can be up to 2A per motor (8A/12-24V DC in total)
Application:
Output interface to control low voltage DC motors
with a supply voltage of 12 to 24VDC as used in
electrical curtain systems, sun blinds, etc
Characteristics:
4 motor outputs with a nominal load of up to 2A per
motor.
Settings:
Programming:
Via PROSOFT, starting with version 2.75 (use as a
‘TDS13524’ with version 2.63 up to 2.73)
AUTOBUS address:
With rotary switches Tens + Units
Installation:
Connections:
DIN rail mounting
AUTOBUS:
AUTOBUS connector set + patch cable supplied
with this unit
Motor power supply:
Depending on the motor voltage: 12-24V (30VDC
max.) / 8Amp
Motor connections:
+/- motor connection
Power Consumption:
Max. 252 mA; standby 20 mA
Dimensions:
162 W x 90 H x 60 D (mm)
9 units
Gross Weight:
0,450 kg
IP protection rate:
IP20
TELETASK Data Sheet EN
89
Update May 2013
Output Interfaces
Schematic Drawing:
TELETASK Data Sheet EN
90
Update May 2013
Output Interfaces
TDS13608
Dimmer interface 8 x 0-10V output
Dimmer output interface with 8 analog outputs 0-10V to be connected on
the AUTOBUS to control maximum 8 power dimmers with galvanic isolated
0-10V inputs.
Application:
Output unit to be connected on the decentralised
AUTOBUS network to control power dimmers for
lighting control.
Characteristics:
8 analog outputs 0-10V (power control) with earth
connector for the connection of the shielding to the
dimmer units cable.
Earth connector to connect the shielding of the
obliged shielded cable.
Max. cable length between dimmer 0-10V control
output and the dimmer is 25m
Load min. 50Kohm.
Output impedance (0-10V): 500Ω
Settings:
Dimmer Settings
With PROSOFT starting with version V2.75
AUTOBUS address
Through rotary switches ‘Tens’ + ‘Units’
Jumpers
JP1: AUTOBUS terminating resistor (standard
open)
Installation:
Connections:
DIN rail mounting
AUTOBUS
AUTOBUS connector set + patch cable supplied
with this unit
Outputs
With the screw connectors 1,5 mm² (solid or
stranded)
One common 0V output is provided per 4 outputs
Power Consumption:
Max. 70 mA
Dimensions:
63 W x 90 H x 60 D (mm)
Net | Gross weight:
0,132 kg | 0,220 kg
IP protection rate:
IP20
TELETASK Data Sheet EN
91
Update May 2013
Output Interfaces
Schematic Drawing:
TELETASK Data Sheet EN
92
Update May 2013
Output Interfaces
TDS13610
Fluorescent Dimmer interface 8 x 1-10V (+ 8x10A contact)
The TDS13610 fluorescent dimmer interface has 8 analog 1-10V outputs to
control dimmable fluorescent lights. The interface also provides the
necessary 8 output contacts to switch the main power supply to the 8
dimmed light units.
Otherwise, using PROSOFT Suite V3.0 or higher, you can set the analog
outputs as 0-10V outputs. In addition, the contact outputs can be used as
standard output contacts, totally independent of the 0-10V outputs. (this
can be combined for every 4 channels)
To supply the galvanic isolated output electronics, use a separated/
isolated 12V power supply (optional available ref. TDS10130).
Application:
Characteristics:
Settings:
Analog output interface to control dimmable
fluorescent lights (or alternative use as described
above).
Relays
The 8 relays are plug-in type and can be replaced
individually if necessary. (Cover need to be
released with one screw.)
IN = 10A/250VAC cos ϕ 0,7
IHI = 80Amp (20ms) (see Remark: Inrush Currents)
There is one common by 4 relays
Analog
The analog outputs are galvanic isolated from the
AUTOBUS
1-10V
Max. 5mA (= aprox. 25 HF-DIM)
0-10V
Load min. 50Kohm
Output impedance (0-10V/1-10V): 33Ω
AUTOBUS address
Via rotary switches ‘Tens’ + ‘Units’
PROSOFT Suite
Via PROSOFT Suite 3.0 or higher as:
8 x 1-10V
or 4 x 1-10V + 4 x 0-10V + 4 x indep. Relays
or 8 x 0-10V + 8 x independent relays
Via PROSOFT 2.80 to be programmed as
TDS13608 (only for 8 x 1-10V output)
Installation:
Connection:
Power Consumption:
TELETASK Data Sheet EN
DIN rail mounting (9 units wide).
AUTOBUS
AUTOBUS connector set + patch cable supplied
with this unit.
External Power
Supply (12 VDC/
200mA)
Screw terminals; max. 4mm² (solid) or 2,5mm²
(stranded)
0-10V | 1-10V output
Screw terminals; max. 1,5mm² (solid or stranded)
Relay output
Screw terminals; max. 4mm² (solid) or 2,5mm²
(stranded)
AUTOBUS
350 mA maximum (all relays on)
93
Update May 2013
Output Interfaces
Power Supply Input
200 mA maximum
Dimensions:
162 W x 90 H x 60 D (mm)
Net | Packed Weight:
0,450 kg | 0,600 kg
IP protection rate:
IP20
Schematic Drawing:
TELETASK Data Sheet EN
94
Update May 2013
Output Interfaces
TDS13620
DALI - DSI - DMX interface
TDS13620 is a TELETASK- AUTOBUS interface for DALI / DSI / DMX. It can
be configured to integrate up to 64 DALI ballasts or 1 DSI output or 64 DMX
compliant channels in combination with the TELETASK domotics system.
The interface is suited for controlling monochrome and multicolour ballasts
and lighting units with DALI, DSI or DMX control input. The interface supports
ramp speeds up to 1 hour, also for DALI/DSI.
The TDS13620 interface has a manual override button and an external
override input which can be used in case of emergency/evacuation.
Advantage of DSI over DALI: In case of failure or replacement of DSI
electronic ballast, the unit replaced does not need to be readdressed/configured.
Advantage of DALI/DSI over 1-10V: It dims to off, so no mains switching
equipment is required to turn them off.
Advantage of DALI: individual (addressable) and grouped control, including
feed-back to the TDS system when ballast or lamp is defect.
Application:
Characteristics:
Output interface to control 64 DALI or 1 DSI or 64
DMX compliant channels
Outputs
DALI output: up to 64 DALI ballasts/addresses.
DSI output: 1 DSI output / up to 100 ballasts.
DMX output: up to 64 DMX addresses.
The DALI / DSI / DMX bus is 1500V galvanic
isolated from the AUTOBUS (higher available on
request).
Build-in DALI/DSI power supply (power is taken
from the AUTOBUS for both galvanic sides). No
external power supply is needed.
Override
Manual override button: When clicked on the
manual override the output alters to 40% (LED
blinking) to 100% (LED ON) to normal/OFF (LED
OFF). As soon as an AUTOBUS command is
received, the manual override will get ignored until
pushed again.
External override contact: Must be a voltage free
contact within 100m away from the interface. When
the external contact is closed, all connected
DALI/DSI/DMX devices will go to 100% (LED ON).
If this contact is used, it may be necessary to
implement this feature into the emergency
evacuation procedures of the concerned
area/building.
DALI feedback features Touch panel LED will blink on lamp/ballast defect.
Full status information of every individual
lamp/ballast address is available in
PROSOFT-Diagnostics.
Settings:
TELETASK Data Sheet EN
AUTOBUS address
Via two rotary switches ‘Tens’ and ‘Units’.
Configuration
Via PROSOFT Suite 3.3 or higher (to be set as
DALI- or DSI- or DMX-mode).
Jumper
Terminator: terminating resistor (standard Off)
DALI address
The ballast must be configured before connecting.
Groups are simply configured within PROSOFT.
95
Update May 2013
Output Interfaces
Three methods (A, B or C) for ballast address
configuration are possible:
A: By dedicated tool of ballast supplier:
1) Close external override input.
2) Connect tool to DALI bus. Make sure that the
dedicated tool doesn’t deliver power to the DALI
bus. Otherwise, the interface has to be
disconnected.
3) Follow the instructions of the dedicated tool.
4) Finish configuration by opening external
override.
B: Physical address allocation mode:
1) Close external override input.
2) Press manual override button for 10sec.
3) Indication led will start blinking 3 times in repeat.
All ballasts go to 100%. Configuration mode will be
terminated after 15min.
4) Decouple lamp at first ballast to assign address
1.
5) Reinsert lamp. Ballast will go to 50%. If not
repeat step 4.
6) Repeat step 4 to 5 to assign the rest of the
addresses for the remaining ballasts.
7) Press manual override button to terminate
configuration. Indication LED will blink fast and all
the ballasts will go to 100% > 0% > 100% > 0% >
100%.
8) Open the external override input.
C: The TDS20620 DALI-address programming tool
See datasheet TDS20620
DSI address
Not applicable
DMX address
0 to 255 (max. 64 addresses can be defined).
Follow the supplier instructions of the used DMX
devices for address configuration.
Installation:
Connection:
Power Consumption:
TELETASK Data Sheet EN
DIN rail mounting | 3.5 units
AUTOBUS
AUTOBUS connector set + patch cable supplied
with this unit
DALI / DSI / DMX
Screw terminals for wires max. 1.5mm² (solid or
stranded).
DMX: Always use shielded cable with twisted pair
wires (1 pair for DMX data and 1 wire for 0V signal)
DALI/DSI wire sections:
0.5mm² for total cable length 0-100m
0.75mm² for total cable length 100m-150m
1.5mm² for total cable length 150m-300m
External override
Override input: voltage free contact
0.34mm² for total cable length 0-100m
AUTOBUS
Min. 140mA (DMX or 1 DSI / DALI ballast
connected)
+ 2.5mA for every DSI / DALI ballast connected
DALI = Max. 300mA
DSI = Max. 390mA
DMX = Max. 140mA
96
Update May 2013
Output Interfaces
Dimensions Net | Packed:
63W x 90H x 60D | 180W x 84H x 107D (mm)
Weight Net | Packed:
0.139kg | 0.227kg
IP protection rate:
IP20
Error preview:
TELETASK Data Sheet EN
In Diagnostics
-
Lamp defect
Ballast defect
Power failure (230V missing)
Ballast not found
DALI bus error message (not a single ballast
found)
On the interface
-
AUTOBUS voltage
Interface malfunction (+additional information)
Interface error message (eg. to hot)
External contact (only with DALI)
Interface warning (eg. voltage to low)
97
Update May 2013
Output Interfaces
Schematic Drawings:
TELETASK Data Sheet EN
98
Update May 2013
General Interfaces
TDS20620
DALI-address programming tool
DALI-address programming tool for System Integrators.
With this tool you can address any of the individual connected DALI
ballasts (address 0 to 63).
To be used together with TDS13620 TELETASK DALI Interface.
Application:
Addressing tool for DALI ballasts.
Characteristics:
General
Software addressing of DALI compatible ballasts.
Settings:
Configuration
Use configuration software of the included
mini CD-rom.
Installation:
Mounting
Wall mount
Unit power supply
USB (from PC)
DALI power supply
TDS13620 interface
PC
USB interface
DALI
DALI bus
Connection:
Power Consumption:
<0,1W (TDS20620)
Dimensions:
132 W x 71 H x 25 D (mm)
Net | Packed Weight:
0,135 kg |0,280 kg
Packaging content:
1x TDS20620 tool
1x USB cable
1x mini CD-rom
1x Installation manual
IP protection rate:
IP30
Operation range:
TELETASK Data Sheet EN
Temperature
From 0°C to +60°C
Relative humidity
5% to 80% at 25°C (no humidity/condense)
99
Update May 2013
General Interfaces
Schematic Drawing:
TELETASK Data Sheet EN
100
Update May 2013
Output Interfaces
TDS13226
POWER DIMMER 4 x 1000VA (total max. 3000VA) - Wall mounting
4 channels, 0-10V input power dimmer 4 x 1000VA output to dim resistive
and inductive loads and dimmable electronic transformers (LED, ...).
Wall mounting. For use with 230V/50Hz supply.
Each channel is short circuit protected by a fuse and thermal overload
protected by a thermal protection switch.
Application:
Characteristics:
Installation:
Connections:
Dimmer with 0-10V control inputs.
E.g.: Analog outputs: MICROS+ / TDS13608
/ TDS13610 (0-10V mode).
General
4 x 0-10V inputs; 4 x 1000VA output. Total power
max. 3000VA. See derating curve for more details.
Leading edge control suited for dimming resistive
and inductive power loads (lights), including
electronic transformers and LED power supplies,
which are leading edge dimmable.
Build-in 4 x ceramic fuse 20mm – 5Amp F/250V.
The 0-10V inputs are isolated from the mains.
Input impedance (0-10V): 48kΩ
Mains connection 230V/50Hz
Remark: If one channel is loaded with 1000VA the
channel next to it is max. 500VA at 25°C
environmental temperature due to heat distribution.
External override contact
When the external contact is closed, all connected
loads will be 100% ON. If this contact is used, it
may be necessary to implement this feature into
the emergency evacuation procedures of the
concerned area/building.
Best practice
Always make sure that the power dimmer is
mounted at the upright position for proper heat
transfer. See arrows on the PCB ‘This side UP’.
Preheat
Change the preheat potentiometer setting if your
load is still (a little bit) ON when dimmed to OFF.
Signal input 0-10V
Screw terminals 1mm² (18AWG) with common 0V
connection.
Power supply
230V/50Hz: Screw terminals 2.5mm² (14AWG).
Add an external general protection MCB of 16Amp
maximum.
Output
Screw terminals 2.5mm² (14AWG)
External override
Override input: voltage free contact
1mm² (18AWG)for total cable length 0-100m
Power Consumption:
TELETASK Data Sheet EN
Depends on the connected loads.
101
Update May 2013
Output Interfaces
Dimensions:
Housing
310W x 185H x 47D (mm)
Net | Gross weight:
2,180kg | 2,310kg
IP protection rate:
IP20
Schematic Drawings:
TELETASK Data Sheet EN
102
Update May 2013
General Interface
TDS10130
AUTOBUS power supply - DIN rail mounting
Rail mountable and adjustable 12V DC-40VA power supply. This unit can be
used to power the TDS10200 NANOS Central Unit, the TDS13610, TDS12280
and as extra power supply for the AUTOBUS.
Application:
Characteristics:
Used as power supply for MICROS+ or NANOS central
unit as (additional) power supply on AUTOBUS
(SERVUS and other cases).
Input
100-230VAC
Output
12VDC/3,5A
Power supply
Mains connections: 100- tot 230VAC
Settings:
None
Installation:
Mounting on DIN rail
Connections:
100 – 230VAC on mains connectors
12VDC outputs: Connect the 0V with the 0V of the
complete AUTOBUS; connect the 12 V with the
extension side of the AUTOBUS.
Power Consumption
Not applicable
Dimensions:
75W x 65H x 90D (mm)
4,2 units
Gross Weight:
0,360 kg
IP protection rate:
IP20
Limited warranty:
2 years
TELETASK Data Sheet EN
103
Update May 2013
General Interface
Schematic Drawing:
TELETASK Data Sheet EN
104
Update May 2013
Accessories
TDS12501
Mini Remote Control
The TDS12501 is a small and user friendly infra-red remote control for home
automation control. The controlled functions adapt automatically according the
touch panel or interface to which the infrared remote control is communicating.
(button 1 controls function 1 of the TELETASK interface which receives the IR
code)
Application:
To be used where remote control of the functions on a
touch panel or other TELETASK interface with infrared
receiver is desired.
Characteristics:
The remote control is equipped with 8 buttons for the
control of 8 functions; the controlled function depends
on the TELETASK interface that receives the IR
command.
Shift button ‘arrow’: pressed in combination with the 8
numeric buttons it controls 8 extra functions (right
group of 8 buttons on LATUS)
Shift button ‘house’: pressed in combination with the 8
numeric buttons it controls the 8 “MASTER” functions.
Battery
CR2025 (3V Lithium) – supplied with the unit.
Compatible with CR2032
Settings:
IR functions via PROSOFT
Installation:
None
Connections:
None
Power Consumption:
Estimated battery lifetime: 1 year (no warranty on the
battery)
Dimensions:
33 W x 86 H x 7 D (mm)
Net | Gross Weight:
0,015 kg | 0,050 kg
TELETASK Data Sheet EN
105
Update May 2013
Accessories
TDS12502
Remote Control
The TDS12502 is an all-in-one, user friendly infra-red remote control for
home automation control. User friendly interface, because the remote
control automatically adapts its functions to the place where you are.
Application example: When the central lights for every room are
programmed on button 1 of the according input interfaces, clicking button 1
on your remote control will change the central light. If you go to another
room with a TELETASK wall panel, and you click the same button number
1, the central light in the new room will be changed instead of the former
one.
Application:
To be used where remote control of the functions on
a touch panel or other TELETASK interface with
infrared receiver is desired.
There are more functions to be controllable on the
remote control than on a touch panel or digital input
interface.
To be used in combination with an IR receiver (in
touch panel or external with TDS12125 or
TDS12127)
Characteristics:
The remote control is equipped with 8 buttons for
the control of 8 functions. The controlled function
depends on the TELETASK interface that receives
the IR command.
8 numeric buttons for the control of direct functions.
Shift button: ‘ ‘: in combination with the 8 numeric
buttons, the extra functions are controlled (button 916 on a LATUS).
Shift button ‘house’: in combination with the 8
numeric buttons, the ‘MASTER’ functions are
controlled.
Audio – video buttons.
Battery
CR2025 (3V Lithium) – supplied with the unit.
Compatible with CR2032
Settings:
IR functions via PROSOFT
©+↑
©+↓
B&O (455kHz)
Standaard (36kHz)
Installation:
None
Connections:
None
Power Consumption:
Estimated battery lifetime: 1 year (no warranty on
the battery)
Dimensions:
46 W x 175 H x 8 D (mm)
Net | Gross Weight:
0,040 kg | 0,150 kg
TELETASK Data Sheet EN
106
Update May 2013
Accessories
TDS10119
Audio phone to IP interface
The Audio to IP interface has to be used to convert an analog telephone
signal to IP. Especially useful to connect a door phone. If the door phone is
connected to the same network as the DoIP Central unit and a touch
screen, integrating the door phone in the TELETASK system is most easy.
Application:
Characteristics:
Settings:
Convert analog telephone signal to IP.
Voice gateway
Session Initiation Protocol (SIP) v2 (RFC 3261, 3262, 3263,
3264)
SIP proxy redundancy - dynamic via DNS SRV, A
records
Reregistration with primary SIP proxy server
SIP support in Network Address Translation (NAT) networks
(including Serial Tunnel [STUN])
Voice algorithms
G.711 (A-law and μ-law)
G.726 (16/24/32/40 kbps)
G.729 A
G.723.1 (6.3 kbps, 5.3 kbps)
Configuration
Web browser administration and configuration via integrated
web server. See technical manual.
Connections:
WAN RJ-45 Ethernet port (IEEE 802.3)
LAN RJ-45 Ethernet port (IEEE 802.3)
RJ-11 FXS phone port - for analog circuit telephone device
(tip/ring)
RJ-11 FXO line port - for Telco or PBX connection
DC input: +5V DC at 2.0A max
Power Consumption:
5W
100-240V, 50-60 Hz
Dimensions:
101 W x 28 H x 101 D (mm)
Net | Gross Weight:
0,145 kg | 0,245 kg
Packaging content:
SPA3102 Phone adapter with router
Power adapter
1 RJ-45 Ethernet cable
1 RJ-11 telephone cable
Quick installation guide
IP protection rate:
IP20
Operation range:
Limited warranty:
TELETASK Data Sheet EN
Temperature
0°C to +45°C max.
Relative humidity
10% to 90% at 25°C (no humidity/condense)
2 years
107
Update May 2013
Accessories
Schematic Drawing:
TELETASK Data Sheet EN
108
Update May 2013
Accessories
TDS20101
Phone for AURUS-TFT
This phone is the ideal partner to be used in combination with the AURUSTFT which results in a complete indoor unit for video-door-phone
application. Therefore the door-phone system needs to be provided with a
standard analogue ‘a-b’ phone connection (for this phone).
The TDS20101 telephone is one of the smallest analogue design phones
on the market and gives ease of use with the keyboard positioned under
the handset. The head is elegantly lifted into your hand by lightly pushing
on the upper part. It is equipped with 2 direct memory keys, 10 secondary
memory keys, a last number redial and a mute function. The ring tone can
be switched from high to low. The phone is meant to be wall mounted next
to the AURUS-TFT touch screen.
Color: Anthracite / Silver
Application:
Telephone for use in combination with
AURUS-TFT as indoor video-door phone set.
Characteristics:
Wired analogue phone
Installation:
Wall mounting
Connections:
PABX
a-b connection (analogue telephone)
Dimensions:
Unit
Packing
200H x 44W x 50D
257H x 130W x 60D
Net | Gross Weight:
0,140 kg (base) + 0,150 kg (hook) | 0,720 kg
Packaging content:
TDS20101
Operation range:
Temperature
0°C to +30°C max.
Relative humidity
5% to 80% at 25°C (no humidity/condense)
Limited warranty:
2 years
Schematic Drawing:
TELETASK Data Sheet EN
109
Update May 2013
Accessories
TDS20110
DECT phone for AURUS-TFT (Wireless)
The TDS20110 DECT phone is the ideal partner to be used in
combination with the AURUS-TFT which results in a complete indoor unit
for video-door-phone application. Therefore the door-phone system
needs to be provided with a standard analog ‘a-b’ phone connection (for
this DECT-phone).
The TDS20110 telephone is one of the smallest analogue design
phones on the market and gives ease of use with the keyboard
positioned under the handset. The head is elegantly lifted into your hand
by lightly pushing on the upper part. It is equipped with 2 direct memory
keys, 10 secondary memory keys, a last number redial and a mute
function. The ring tone can be switched from high to low. The phone is
meant to be wall mounted next to the AURUS-TFT touch screen.
Color: Anthracite / Silver
Application:
DECT telephone for use in combination with AURUSTFT as indoor video-door phone set.
Characteristics:
12 hours talk time, 7 days standby time, GAP
compatible. Indoor range: max. 20 m
Pan-European approved EN55022 and EN55024
Installation:
Wall mounting
Connections:
PABX
Mains
a-b connection (analog telephone)
230VAC
Dimensions:
Unit
Packing
200H x 44W x 50D
257H x 130W x 75D
Net | Gross Weight:
0,310kg (base) + 0,140kg (hook) + 0,140kg (mains
adaptor) | 0,990kg
Packaging content:
Telephone handset + Base station + Table stand
RJ-11 cable 3m
Li-ion 3,7V 650mAh rechargeable battery
Mains adaptor 230VAC
Operation range:
Temperature
Relative humidity
0°C to +30°C max.
5% to 80% at 25°C (no humidity/condense)
Limited warranty:
2 years
Schematic Drawing:
TELETASK Data Sheet EN
110
Update May 2013
Accessories
TDS12510
Infrared transmitter
This module re-transmits all the infrared signals which were received on the
infrared receiver on the connected AUTOBUS.
If necessary the transmitter led can be fit removed from the housing to be
connected on a cable.
Application:
This transmitter is used to transmit the IR-signals
which are on the AUTOBUS, coming from the IRreceivers in the connected touch panels and IRreceivers connected to the digital input interfaces
with IR-input. Typical applications are the control of
audio/video equipment in the living room, out of the
kitchen, bath room, etc when extra loudspeaker
sets are installed in these rooms.
Characteristics:
Re-transmits the signals on the green IR-link wire of
the AUTOBUS.
Settings:
Normal or reduced transmission power / 38KHz or
36KHz modulation frequency.
Installation:
Mainly to be installed at the back of the audio rack,
with the IR-transmitter led to be reflecting to the IRreceiver of the audio equipment
The transmitter may absolutely not transmit his
signals to receivers of the TELETASK systems. If so
a closed loop is generated, resulting in a disfunction.
Maximum 10 IR-receivers may be connected per IRlink transmitter.
Connections:
By enclosed AUTOBUS connector set
Power Consumption:
Max. 44 mA
Dimensions:
50 W x 90 H x 15 D (mm)
Gross Weight:
0,106 kg
TELETASK Data Sheet EN
111
Update May 2013
Accessories
Schematic Drawing:
TELETASK Data Sheet EN
112
Update May 2013
Accessories
TDS12202
Proximity card
The TELETASK proximity card is a contactless access card to be used in
combination with the TELETASK proximity reader TDS12142. The proximity
card is equipped with internal electronics and antenna for wireless
communication, to get access control. The card can be configured to combine
the access with any other domotics function (lighting, heating, cooling, audio,
etc ).
Application:
Proximity card to be held in front of a TDS12142
proximity reader unit.
Characteristics:
ISO wireless proximity card.
Settings:
Programming
The proximity card can be configured in two ways:
• by CARDSOFT (PC): refer to the CARDSOFT user
manual for more information (starting with PROSOFT
V2.74).
• on the keyboard of the central unit:
- go to ‘user mode’
- go to ‘card program mode’
- choose ‘program’ to program one or more cards.
- choose if the card gat to get access on one or on all
available readers of the house.
- choose the desired domotics function ‘1’ to ‘8’
(defined in PROSOFT).
- hold the proximity card in front of the desired reader
unit.
Erasing
Erasing the card from the system memory can be done
in two ways:
• by CARDSOFT; refer to the CARDSOFT user manual
for more information (starting with PROSOFT V2.74).
• on the keyboard of the central unit:
- go to ‘user mode’
- go to ‘card program mode’
- choose ‘erase’ to clear the card from the system
memory.
- choose the option to erase one card.
- hold the card in front of the proximity reader unit.
Dimensions:
TELETASK Data Sheet EN
85 W x 54 H x 1mm thick (ISO standard dimensions).
113
Update May 2013
Accessories
TDS12203
TAG key holder unit
The TELETASK TAG key holder unit is a contactless access unit to be
used in combination with the TELETASK proximity reader TDS12142. The
TAG key holder unit is equipped with internal electronics and antenna for
wireless communication, to get access control. The unit can be configured
to combine the access with any other domotics function (lighting, heating,
cooling, audio, etc ).
Application:
TAG key holder unit to be held in front of a TDS12142
proximity reader unit.
Characteristics:
ISO wireless proximity TAG.
Settings:
Programming:
The proximity TAG can be configured in two ways:
• by CARDSOFT (PC): refer to the CARDSOFT user
manual for more information (starting with PROSOFT
V2.74).
• on the keyboard of the central unit:
- go to ‘user mode’
- go to ‘card program mode’
- choose ‘program’ to program one or more cards.
- choose if the TAG gat to get access on one or on all
available readers of the house.
- choose the desired domotics function ‘1’ to ‘8’
(defined in PROSOFT).
- hold the proximity TAG in front of the desired reader
unit.
Erasing:
Erasing the TAG from the system memory can be
done in two ways:
• by CARDSOFT; refer to the CARDSOFT user
manual for more information (starting with PROSOFT
V2.74).
• on the keyboard of the central unit:
- go to ‘user mode’
- go to ‘card program mode’
- choose ‘erase’ to clear the TAG from the system
memory.
- choose the option to erase one card.
- hold the TAG unit in front of the proximity reader
unit.
Dimensions:
TELETASK Data Sheet EN
39 W x 34 H x 6.5mm Thick + stainless steel key ring.
114
Update May 2013
General Interfaces
TDS14042
Universal RS232 (A-V and other) interface
Residential multi-room/multi-source (MR) audio/video systems are often
still provided with an RS232 control interface. Besides the existing wide
range of audio/video integration solutions, TELETASK therefore introduces
a configurable and learnable RS232 audio/video interface.
By using this interface an in deep Home Automation integration is realized.
Audio/video control is possible from every TELETASK user interface
(buttons, panels, touch screens, remote control, PC, mobile devices, ).
The interface has also 8 IR-flasher outputs to directly control (extra)
audio/video sources.
Application:
Interface used to integrate the TELETASK system
with RS232 provided audio/video systems.
Characteristics:
AUTOBUS
The interface is connected to AUTOBUS at one
side and at the other via RS232 with concerned
audio/video system. There are also 8 IR-flasher
outputs (mini-jack) for IR flashers order ref.
TDS14043 (not included).
900 codes, 16 sources and 24 zones are
supported.
Settings:
Configuration
Via PROSOFT Suite 3.2 or higher. IR-code learning
via IRSOFT (included with PROSOFT Suite).
AUTOBUS address
Via two rotary switches (ROT1 and ROT2). Factory
preset at AUTOBUS address 24. Open the housing
to change the address setting. Occupies only one
address.
Jumpers
Terminating resistor (inside). To be used when the
interface is last interface on the AUTOBUS cable.
Installation:
Connections:
In the immediate neighborhood of the connected
audio system (RS232 cable limited to 50 meter).
IR flashers (optional) are sticked in front of the IR
receiver of the audio system (IR cable limited to 75
meter)
AUTOBUS
Through RJ45 cable to standard RJ45 wall
connector
(wall connector is not included)
Power Supply
Schuko Mains adapter included (230V/50Hz). Can
be exchanged by other adapter with same output
voltage and current (12V/200mA).
RS232
Via 9-pins SUB-D connector (cable is male
connector). Used or learning IR-codes and for
operation with the RS232 audio/video device.
Power Consumption:
Max. 25 mA
Dimensions:
140 W x 35 H x 110 D (mm)
Content:
TDS14042, NULL modem cable (Male-Male),
TELETASK Data Sheet EN
115
Update May 2013
General Interfaces
BOSE data cable, RS232 SUB-D (Male-Female),
patch cable (AUTOBUS), power supply cable.
Net | Gross Weight:
0.8 kg |0,9 kg
Schematic Drawings:
TELETASK Data Sheet EN
116
Update May 2013
General Interfaces
TDS14043
IR-flasher
Optional IR-Flasher to be used in combination with TDS14041/TDS14042
learnable IR audio interface.
Application:
The IR-Flasher is used to send the regenerated IR codes
coming from the learnable IR audio interface
(TDS14041/TDS14042) to the receiver of the controlled
audio component.
Characteristics:
IR-flasher to send IR signals of 36-38 kHz and 450kHz.
Settings:
None
Installation:
The IR-flasher is sticked in front of the IR receiver of the
controlled audio component by means of a pre mounted self
adhesive tape.
(The IR-flasher cable is extendable up to max. 75m using a
shielded cable)
Connections:
TDS14041/TDS14042 Through mini jack 3,5mm
Power Consumption:
Dimensions:
Gross weight:
TELETASK Data Sheet EN
Not applicable
IR-flasher
14 W x 8 H x 6.5 D (mm)
Cable
Standard cable length 3m, extendable up to max 75m using
a shielded cable (0.34mm² when longer than 10m).
0,050 kg
117
Update May 2013
General Interfaces
Schematic Drawing:
TELETASK Data Sheet EN
118
Update May 2013
General Interfaces
TDS90160
Audio splitter cable
Optional available audio splitter cable to make easy connection between the
several audio components integrated and controlled by the TELETASK
learnable IR audio generator TDS14041.
Application:
The audio splitter cable is used to make the connection
between the different audio components in combination
with the TDS14041 learnable IR audio generator.
Characteristics:
1Male to 2Male RCA connector cable.
Settings:
None
Installation:
The audio splitter cable is connected between the
different audio components used in the audio
integration (audio source and audio amplifier)
Connections:
Audio components
RCA connectors
Power Consumption:
Dimensions:
Not applicable
cable
50 cm long
Gross weight:
TELETASK Data Sheet EN
0,200 kg
119
Update May 2013
General Interfaces
TDS14104
Multiroom-Multisource Audio Amplifier 4 zones (MMA4)
This is a high-quality audio distribution system allowing you to distribute up
to 5 different sound sources to 4 audio zones.
The integration between TDS and MMA4 is obtained by using LAN
connection (A/V software license) or RS232 (TDS14042) to the DoIP
system.
Each zone is equipped with a 2 x 25 watt RMS Class D amplifier. This unit
has two build-in FM tuners, a digital audio stream and the possibility to
connect two external audio sources.
The unit comes standard with a remote control, which can show info from a
mp3 track or the tuner RDS information + charging station.
Application:
Characteristics:
Multi-room Multi-source audio amplifier/Server.
General
4 zones, 5 sources.
Amplifier
Class D amplifier - 2 x 25 W RMS per zone.
(Only 0.1% distortion with 16W)
Sources
2 x Build-in FM Tuner with RDS info.
1 x Digital audio player (USB slot, SD Card). Supported
audio formats: .mp3, .wav, .m4a, .wma.
2 x external audio source with IR control (e.g.
blu-ray player, TV, ).
Updates
Software updates via LAN.
Settings:
Configuration
Via PROSOFT Suite 3.2 or higher and the MMA Remote
Control.
Connections:
Ethernet
1 x RJ-45 Ethernet connector (future use).
RS232
2 x serial RS232 ports. Only use “COM2” on the MMA4
for connecting with the TDS14042 A/V Interface.
Speakers
4 x stereo connections for 4/8 ohm speakers.
Line-out
RCA connectors to external power amplifiers (for
example BASS reflex unit).
Power supply
110 V - 230 V (50/60Hz).
Remote control
Antenna connection for included antenna.
FM tuner (2x)
FM Antenna connector (1x).
Power Consumption:
Max. 200W
Dimensions:
436 W x 415 H x 115 D (mm)
500 W x 300 H x 500 D (package)
Net | Gross Weight:
6 kg | 8,8 kg
Content:
MMA4, power cord, remote control + remote control
antenna + charging station, FM antenna.
Limited warranty:
2 years
TELETASK Data Sheet EN
120
Update May 2013
General Interfaces
Schematic Drawings:
TELETASK Data Sheet EN
121
Update May 2013
General Interfaces
TDS14108
Multiroom-Multisource Audio Amplifier 8 zones (MMA8)
This is a high-quality audio distribution system allowing you to distribute up
to 8 different sound sources to 8 audio zones.
The integration between TDS and MMA8 is obtained by using LAN
connection (A/V software license) or RS232 (TDS14042) to the DoIP
system.
Each zone is equipped with a 2 x 25 watt RMS Class D amplifier. This unit
has two build-in FM tuners, a digital audio stream and the possibility to
connect two external audio sources.
The unit comes standard with a remote control, which can show info from a
mp3 track or the tuner RDS information + charging station.
Application:
Characteristics:
Multi-room Multi-source audio amplifier/Server.
General
8 zones, 8 sources.
Amplifier
Class D amplifier - 2 x 25 W RMS per zone.
(Only 0.1% distortion with 16W)
Sources
2 x Build-in FM Tuner with RDS info.
3 x Digital audio player (USB slot, SD Card). Supported
audio formats: .mp3, .wav, .m4a, .wma.
3 x external audio source with IR control (e.g.
blu-ray player, TV, ).
Updates
Software updates via LAN.
Settings:
Configuration
Via PROSOFT Suite 3.2 or higher and the system Remote
Control.
Connections:
Ethernet
1 x RJ-45 Ethernet connector (future use).
RS232
2 x serial RS232 ports. Only use “COM2” on the MMA4
for connecting with the TDS14042 A/V Interface.
Speakers
8 x stereo connections for 4/8 ohm speakers.
Line-out
RCA connectors to external power amplifiers (for example
BASS reflex unit).
Power supply
110 V - 230 V (50/60Hz).
Remote control
Antenna connection for included antenna.
FM tuner (2x)
FM Antenna connector (1x).
Power Consumption:
Max. 200W
Dimensions:
436 W x 415 H x 115 D (mm)
500 W x 300 H x 500 D (package)
Net | Gross Weight:
6,5 kg | 9,5 kg
Content:
MMA8, power cord, remote control + remote control
antenna + charging station, FM antenna.
Limited warranty:
2 years
TELETASK Data Sheet EN
122
Update May 2013
General Interfaces
Schematic Drawings:
TELETASK Data Sheet EN
123
Update May 2013
General Interfaces
TDS14061
HVAC Modbus Master interface
TDS14061 is an AUTOBUS interface for controlling HVAC systems.
Depending on the brand and the specific unit(s), the interface can be
configured to integrate up to 64 indoor units.
The TDS14061 requires communication over Modbus to a Modbus Slave
interface: TDS20061xx, TDS20062xx or TDS20063xx in order to control the
HVAC system. The interface is suited for controlling specific VRV/VRF and
residential split units.
See the list of the supported HVAC models in this datasheet.
The TDS14061 interface is equipped with a manual override button and an
external override input which can be used in case of an
emergency/evacuation.
Application:
Characteristics:
AUTOBUS interface to integrate up to 64 HVAC
indoor units depending on the HVAC type. This
master interface has to be combined with one of
the following slave units: TDS20061xx,
TDS20062xx or TDS20063xx.
Functionalities
Supported functionalities(Depends on the
connected HVAC system):
- Temperature
- Fan speed control
- 5 Operation modes:Cool,Heat,Auto,Dry,Vent
- Error codes feedback in PROSOFT Diagnostics
Outputs
Modbus output: Supply and data connection to the
slave unit: TDS20061xx, TDS20062xx or
TDS20063xx.
Remark: only one slave can be applied per
master unit
Override
Manual override button:
This button switches between three HVAC
operations (for testing purposes only).
- LED BLINK: All zones off
- LED ON: All zones on
- LED OFF: Back to normal operation (original
state)
Remark: As soon as an AUTOBUS command is
received the manual override will be
cancelled(LED OFF: normal operation).
The external override input switches all HVAC units
‘OFF’ regardless of any AUTOBUS commands and
the manual override for as long as the external
override input contact is closed.
HVAC system error codes are shown in PROSOFT
diagnostics.
Settings:
TELETASK Data Sheet EN
Configuration
Via PROSOFT Suite 3.3.0.38 or higher.
AUTOBUS address
Via two rotary switches "Tens" & "units" (ROT1 and
ROT2). Occupies only one address.
124
Update May 2013
General Interfaces
Installation:
Connections:
Power Consumption:
Jumpers
Terminating resistor. To be used when the
interface is last interface on the AUTOBUS cable.
MODBUS address
The TDS14061 addresses the Modbus slaves
(TDS20061xx, TDS20062xx and TDS20063xx) at
address (hex) 0x50. It cannot be changed.
DIN-rail mounting
3.5 units
HVAC brand specific
Remote Controller (the
wall control panel).
For service reasons it is recommended to provide
the brand specific remote controller panel(s). This
allows the HVAC technician to service his system
in the usual way without the need of TELETASK
system knowhow (see also the remark below).
REMARK FOR
TDS20061HI HITACHI
It is necessary to install the HITACHI local
wired remote controllers of the HITACHI HVAC
system to guarantee optimal compatibility and
functionality!!!
AUTOBUS
AUTOBUS connector set + patch cable supplied
with this unit
To the MODBUS slave
TDS20061xx,
TDS20062xx or
TDS20063xx
4 x 0,25mm², unshielded cable (Modbus power &
data cable) is supplied with the slave unit
TDS20061xx, TDS20062xx or TDS20063xx.
External override
Override input: voltage free contact
0.34mm² for max cable length 100m.
AUTOBUS
Max. 230mA including the slave unit.
Dimensions:
63W x 90H x 60D (mm)
Net | Gross weight:
0,139 kg |0,220 kg
Packaging content:
TDS140061 master interface
AUTOBUS connector set
AUTOBUS patch cable
IP protection rate:
IP20
Operation range
Possible TELETASK error
messages coming from the
TDS14061 master interface
displayed on touch-panels
(e.g. AURUS-OLED) and
Diagnostics.
TELETASK Data Sheet EN
Temperature
0°C to +50°C max.
Relative humidity
5% to 80% at 25°C (no humidity/condense)
“data?”
No information from master interface (check
AUTOBUS connection).
“sens?”
Indoor unit not found.
“version?”
Wrong software version in interface, upgrade
interface.
“slave?”
No TDS2006xxx slave interface found by the
Master interface. (Check connection between
Master and Slave).
“error”
Unspecified ‘other’ error.
125
Update May 2013
General Interfaces
Possible error messages
coming from HVAC system
displayed in PROSOFT
Diagnostics only.
“HVAC error: xxx”
Brand specific HVAC error codes (e.g. Daikin
error code A7 = Indoor Malfunction of swing
motor flap).
Outdoor unit types
Indoor unit types
Device compatibility list:
DAIKIN
TDS20061DA
Remark: Alternatively
Daikin VRV units can also
be integrated with your
TELETASK DoIP system
by means of the IP
Software license
TDS15200 in combination
with the Daikin iTouch
Ethernet interface.
For more details see
datasheet TDS15200.
MITSUBISHI ELECTRIC
TDS20061ME
Remark: Alternatively
Mitsubishi Electric VRF
units can also be
integrated with your
TELETASK DoIP system
by means of the IP
Software license
TDS15200 in combination
with the Mitsubishi
Electric GB50 or AG150
Ethernet gateway.
RXYQ-M/P (VRV II,VRV III)
RXYK (VRV)
RXYSQ-M/P (VRV Small)
RXY-M
RWEYQ
REYQ
FXCQ
FXNQ
FXLQ
FXFQ
FXKQ
FXZQ
FXDQ
FXSQ
FXAQ
Multi, Split and Sky Air
FXUQ
systems will also be
FXMQ
compatible when using D3 FXHQ
Net interfaces (KRP928 or VKM
DTA112)
VAM
Outdoor unit types
Indoor unit types
PUHY
PURY
PQHY
PQRY
PUMY
PUHYP250YJM-A
PKFY
PFFY-PVKM
PLFY-P-VCM
PEFY-P-VMS1
PFFY-P-VLRM
PCFY-P-VGM
PLFY-P-VLMD
PEFY-P-VMM
PFFY-P-VLEM
PLFY-P-VBM
PMFY-P-VBM
PEFY-P-VMH
PEFYP50VMA-E
PEFYP100VMA-E
PEFYP32VMA-E
PEFY-P63VMA(L)-E
For more details see
datasheet TDS15200.
Any non VRF unit (indoor units for
residential use) that can be extended with
the M-net will be compatible with
TDS20061ME.
TOSHIBA
TDS20061TO
TELETASK Data Sheet EN
Outdoor unit types
Indoor unit types
MCY-MAP.HT
MMY-MAP.T8
MMY-MAP.HT8
MMY-MAP.FT8
MMU-AP.H
MMU-AP.YH
MMD-AP.SPH
MML-AP.H
MMD-AP.HFE
MMU-AP.MH
MMD-AP.BH
MMC-AP.H
MML-AP.BH
MMU-AP.WH
MMD-AP.H
MMK-AP.H
MMF-AP.H
126
Update May 2013
General Interfaces
SANYO
TDS20061SY
Outdoor unit types
Indoor unit types
MFL
EFL
SPW_CO
SPW-C
SPW-CR
SGP-EZ
SGP-EW
NWFL
NDHP
NPFL
NPFL
NDSLP
NKFL
NFFL
NDLP
NK2FL
NFMFL
SPW-X
SPW-XM
SPW-ADR
SPW-SR
SPW-LDR
SPW-FUR
SPW-K
SPW-FMR
SPW-FTR
SPW-FR
SPW-KR
SPW-UMR
SPW-U
HITACHI
TDS20061HI
Outdoor unit types
Indoor unit types
RAS-FSN
RAS-FXNE
RCI
RPC
RPFI
RCD
RPK
RPI
RPF
PANASONIC
TDS20061PA
Outdoor unit types
Indoor unit types
Not yet available
Not yet available
LG
TDS20062LG
Outdoor unit types
Indoor unit types
ARUB-LT2
ARUN-LT2
ARUN-GS2
ARUN-LR2
LG HVAC systems using
the LG PI485 interface
(model: PHNFP14A0)
will also be compatible.
ARNU-GB1G2
ARNU-GCEA2
ARNU-GSEL2
ARNU-GSER2
ARNU-GSF12
ARNU-GTEC2
ARNU-GTJC2
ARNU-GB1G2
ARNU-GBHA2
ARNU-GCFA2
ARNU-GCFU2
ARNU-GBGA2
ARNU-GTMC2
ARNU-GBRA2
Outdoor unit types
Indoor unit types
MITSUBISHI HEAVY
TDS20062MH
TELETASK Data Sheet EN
FDTA
FDUA
FDT
FDTCA
FDQSA
FDCT
FDQS
FDTQA
FDCA
FDC
127
Update May 2013
General Interfaces
FDKA
FDTW
FDK
FDTSA
FDEA
FDTS
FDE
FDTWA
FDFLA
FDTQ
FDFL
FDUMA
FDFUA
FDU
FDFU
GREE
TDS20062GR
Outdoor unit types
Indoor unit types
GMVL-R_W/Na-K/M
GMVL-R_W/H-K/M
GMVL-R_W/B-K/M
GMVL-R_W/A-D
GMVL-R_W/AS-F
GMVL-R_W/AS-H
GMV/L-R_P
GMV/L-R_T
GMV/L-R_G
GMV/L-R_Zd
GMV/L-R_Td
FUJITSU
DS20063FU
Outdoor unit types
Indoor unit types
AJ
AUXB
AUXD
ARXA
ARXB
AB*A
AS*A
AS*E
SAMSUNG
Outdoor unit types
Indoor unit types
Not supported by this
hardware interface. Please
use TDS15200. (Estimated
release 2013).
Not supported by this hardware interface.
Please use TDS15200. (Estimated release
2013).
Not supported by this
hardware interface.
IP Ethernet integration
solution (TDS15200)
under development.
Estimated release 2013.
TELETASK Data Sheet EN
128
Update May 2013
General Interfaces
Schematic Drawing:
TELETASK Data Sheet EN
129
Update May 2013
General Interfaces
TDS20061xx
HVAC Modbus Slave interface
The TDS20061xx is the HVAC Modbus Slave which must be used in
combination with the TDS14061 to realize HVAC integration.
The TDS20061xx can be one of the following brands:
TDS20061DA = Daikin
TDS20061ME = Mitsubishi Electric (max. 50 indoor units)
TDS20061TO = Toshiba
TDS20061SY = Sanyo
TDS20061HI = Hitachi
TDS20061PA = Panasonic
Application:
Characteristics:
Settings:
Installation:
TELETASK Data Sheet EN
Interface for control of HVAC systems. Can
support up to 10 outdoor units. To be
combined with TDS14061.
Functionality’s
Supported functionalities (Depends on HVAC
system):
- 5 Modes: Auto,Heat,Cool,Dry,Vent
- Adjustable speed (airflow)
- Set temperature
- Measured room temperature
- HVAC error codes
LCD display
16x2 characters.
Configuration
Automatically with TDS14061.
DIP switches inside
TDS20061DA
Any non-VRV unit (indoor units for residential
use) that can be extended with Daikin D3-net
will be compatible with TDS20061DA.
In accordance, 4 DIP switches inside the
TDS20061DA need to be switched ON
(default OFF) ONLY if no centralized VRV
controller is installed.
If non-VRV units are used, each
Multi/Split/SkyAir indoor unit has to be
provided with a communications interface from
Daikin.
Contact Daikin for more info on these
interfaces and possibilities.
DIP switches inside
TDS20061ME
Any non-VRF unit (indoor units for residential
use) that can be extended with the M-net will
be compatible with TDS20061ME.
In accordance, 4 DIP switches inside the
TDS20061ME need to be switched ON
(default OFF) ONLY if no centralized VRF
controller is installed.
DIN-rail mounting
5.5 units
HVAC brand specific
Remote Controller (the wall
control panel).
For service reasons it is recommended to provide
the brand specific remote controller panel(s). This
allows the HVAC technician to service his system
in the usual way without the need of TELETASK
130
Update May 2013
General Interfaces
system knowhow (see also the remark below).
Connections:
REMARK FOR
TDS20061HI HITACHI
It is necessary to install the HITACHI local
wired remote controllers of the HITACHI
HVAC system to guarantee optimal
compatibility and functionality!!!
HVAC SYSTEM BUS
For TDS20061DA (DAIKIN):
Connect the F1/F2 terminals from
TDS20061DA with F1/F2 Out/Out terminal
from D3-net which is located on an outdoor or
indoor unit of the HVAC system. Do not
connect the TDS20061DA HVAC system bus
to the terminals on one of the indoor units
(F1/F2 In/Out).
For TDS20061ME (MITSUBISHI ELECTRIC):
Connect the M1/M2 terminals from
TDS20061ME with the M1/M2 terminal from
M-net which is located on an outdoor or indoor
unit of the HVAC system.
For TDS20061TO (TOSHIBA):
Connect the U1/U2 terminals from
TDS20061TO with the U1/U2 terminal from
TCC-link net which is located on an outdoor or
indoor unit of the HVAC system.
For TDS20061SY (SANYO):
Connect the U1/U2 terminals from
TDS20061SY with the U1/U2 terminal from
S3-net which is located on an outdoor or
indoor unit of the HVAC system.
For TDS20061HI (HITACHI):
Connect the 1/2 terminals from TDS20061HI
with the 1/2 terminal from H Link-net which is
located on an outdoor or indoor unit of the
HVAC system.
MODBUS data + power
2 x 2 x 0,5mm², unshielded.
This connection should be connected to the
TDS14061 HVAC Modbus Master interface
with the supplied cable.
Power Consumption:
Max. 80mA
Dimensions:
115 W x 63 H x 32 D (mm)
Net | Gross weight:
0,230 kg | 0,350 kg
Packaging content:
TDS20061xx module
Cable for connecting with TDS14061
IP protection rate:
IP30
Operation range
TELETASK Data Sheet EN
Temperature
0°C to +45°C max.
Relative humidity
5% to 80% at 25°C (no humidity/condense)
131
Update May 2013
General Interfaces
Limited warranty:
2 years
Device compatibility list:
DAIKIN
TDS20061DA
Remark: Alternatively
Daikin VRV units can also
be integrated with your
TELETASK DoIP system
by means of the IP
Software license
TDS15200 in combination
with the Daikin iTouch
Ethernet interface.
For more details see
datasheet TDS15200.
MITSUBISHI ELECTRIC
TDS20061ME
Remark: Alternatively
Mitsubishi Electric VRF
units can also be
integrated with your
TELETASK DoIP system
by means of the IP
Software license
TDS15200 in combination
with the Mitsubishi
Electric GB50 or AG150
Ethernet gateway.
Outdoor unit types
Indoor unit types
RXYQ-M/P (VRV II,VRV III)
RXYK (VRV)
RXYSQ-M/P (VRV Small)
RXY-M
RWEYQ
REYQ
FXCQ
FXNQ
FXLQ
FXFQ
FXKQ
FXZQ
FXDQ
FXSQ
Multi, Split and Sky Air
FXAQ
systems will also be
FXUQ
compatible when using D3 FXMQ
Net interfaces (KRP928 or FXHQ
DTA112)
VKM
VAM
Outdoor unit types
Indoor unit types
PUHY
PURY
PQHY
PQRY
PUMY
PUHYP250YJM-A
PKFY
PFFY-PVKM
PLFY-P-VCM
PEFY-P-VMS1
PFFY-P-VLRM
PCFY-P-VGM
PLFY-P-VLMD
PEFY-P-VMM
PFFY-P-VLEM
PLFY-P-VBM
PMFY-P-VBM
PEFY-P-VMH
PEFYP50VMA-E
PEFYP100VMA-E
PEFYP32VMA-E
PEFY-P63VMA(L)-E
For more details see
datasheet TDS15200.
Any non VRF unit (indoor units for
residential use) that can be extended with
the M-net will be compatible with
TDS20061ME.
TOSHIBA
TDS20061TO
Outdoor unit types
Indoor unit types
MCY-MAP.HT
MMY-MAP.T8
MMY-MAP.HT8
MMY-MAP.FT8
MMU-AP.H
MMU-AP.YH
MMD-AP.SPH
MML-AP.H
MMD-AP.HFE
MMU-AP.MH
MMD-AP.BH
MMC-AP.H
MML-AP.BH
MMU-AP.WH
MMD-AP.H
MMK-AP.H
MMF-AP.H
SANYO
TDS20061SY
Outdoor unit types
Indoor unit types
MFL
EFL
SPW_CO
NWFL
NDHP
NPFL
TELETASK Data Sheet EN
132
Update May 2013
General Interfaces
HITACHI
TDS20061HI
PANASONIC
TDS20061PA
SPW-C
SPW-CR
SGP-EZ
SGP-EW
NPFL
NDSLP
NKFL
NFFL
NDLP
NK2FL
NFMFL
SPW-X
SPW-XM
SPW-ADR
SPW-SR
SPW-LDR
SPW-FUR
SPW-K
SPW-FMR
SPW-FTR
SPW-FR
SPW-KR
SPW-UMR
SPW-U
Outdoor unit types
Indoor unit types
RAS-FSN
RAS-FXNE
RCI
RPC
RPFI
RCD
RPK
RPI
RPF
Outdoor unit types
Indoor unit types
Not yet available
Not yet available
Schematic Drawing:
TELETASK Data Sheet EN
133
Update May 2013
General Interfaces
TDS20062xx
HVAC Modbus Slave interface
The TDS20062xx is the HVAC Modbus Slave which must be used in
combination with the TDS14061 to realize HVAC integration.
The TDS20062xx can be one of the following brands:
TDS20062LG = LG
TDS20062MH = Mitsubishi Heavy
TDS20062GR = Gree
Application:
Characteristics:
Interface for control of HVAC systems. Can
support up to 10 outdoor units. To be
combined with TDS14061.
Functionality’s
Supported functionalities (Depends on HVAC
system):
- 5 Modes: Auto,Heat,Cool,Dry,Vent
- Adjustable speed (airflow)
- Set temperature
- Measured room temperature
- HVAC error codes
LCD display
16x2 characters.
Settings:
Configuration
Automatically with TDS14061.
Installation:
DIN-rail mounting
5.5 units
HVAC brand specific
Remote Controller (the wall
control panel).
For service reasons it is recommended to
provide the brand specific remote controller
panel(s). This allows the HVAC technician to
service his system in the usual way without the
need of TELETASK system knowhow.
HVAC SYSTEM BUS
For TDS20062LG (LG):
Connect the Internet A / Internet B terminals
from TDS20062LG with the Internet A /
Internet B terminals which are located on an
outdoor unit of the HVAC system.
Connections:
For TDS20062MH Mitsubishi Heavy:
Connect the A/B terminals from TDS20062MH
with the A/B terminal which is located on an
outdoor or indoor unit of the HVAC system.
MODBUS data + power
2 x 2 x 0,5mm², unshielded.
This connection should be connected to the
TDS14061 HVAC Modbus Master interface
with the supplied cable.
Power Consumption:
Max. 80mA
Dimensions:
115 W x 63 H x 32 D (mm)
TELETASK Data Sheet EN
134
Update May 2013
General Interfaces
Net | Gross weight:
0,230 kg | 0,350 kg
Packaging content:
TDS20062xx module
Cable for connecting with TDS14061
IP protection rate:
IP30
Operation range
Temperature
0°C to +45°C max.
Relative humidity
5% to 80% at 25°C (no humidity/condense)
Limited warranty:
2 years
Device compatibility list:
LG
TDS20062LG
Outdoor unit types
Indoor unit types
ARUB-LT2
ARUN-LT2
ARUN-GS2
ARUN-LR2
LG HVAC systems using
the LG PI485 interface
(model: PHNFP14A0)
will also be compatible.
ARNU-GB1G2
ARNU-GCEA2
ARNU-GSEL2
ARNU-GSER2
ARNU-GSF12
ARNU-GTEC2
ARNU-GTJC2
ARNU-GB1G2
ARNU-GBHA2
ARNU-GCFA2
ARNU-GCFU2
ARNU-GBGA2
ARNU-GTMC2
ARNU-GBRA2
MITSUBISHI HEAVY
TDS20062MH
Outdoor unit types
Indoor unit types
FDCA
FDC
FDTA
FDUA
FDT
FDTCA
FDQSA
FDCT
FDQS
FDTQA
FDKA
FDTW
FDK
FDTSA
FDEA
FDTS
FDE
FDTWA
FDFLA
FDTQ
FDFL
FDUMA
FDFUA
FDU
FDFU
GREE
TDS20062GR
Outdoor unit types
Indoor unit types
GMVL-R_W/Na-K/M
GMVL-R_W/H-K/M
GMVL-R_W/B-K/M
GMVL-R_W/A-D
GMV/L-R_P
GMV/L-R_T
GMV/L-R_G
GMV/L-R_Zd
TELETASK Data Sheet EN
135
Update May 2013
General Interfaces
GMVL-R_W/AS-F
GMVL-R_W/AS-H
GMV/L-R_Td
Schematic Drawing:
TELETASK Data Sheet EN
136
Update May 2013
General Interfaces
TDS20063xx
HVAC Modbus Slave interface
The TDS20063xx is the HVAC Modbus Slave which must be used in
combination with the TDS14061 to realize HVAC integration.
The TDS20063xx can be one of the following brands:
TDS20063FU = Fujitsu
Application:
Characteristics:
Interface for control of HVAC systems. Can
support up to 10 outdoor units. To be
combined with TDS14061.
Functionality’s
Supported functionalities (Depends on HVAC
system):
- 5 Modes: Auto,Heat,Cool,Dry,Vent
- Adjustable speed (airflow)
- Set temperature
- Measured room temperature
- HVAC error codes
LCD display
16x2 characters.
Settings:
Configuration
Automatically with TDS14061.
Installation:
DIN-rail mounting
5.5 units
HVAC brand specific
Remote Controller (the wall
control panel).
For service reasons it is recommended to
provide the brand specific remote controller
panel(s). This allows the HVAC technician to
service his system in the usual way without the
need of TELETASK system knowhow.
HVAC SYSTEM BUS
For TDS20063FU (Fujitsu):
Connect X1/X2 terminals from TDS20063FU
with the X1/X2 terminal which is located on an
outdoor or indoor unit of the HVAC system.
MODBUS data + power
2 x 2 x 0,5mm², unshielded.
This connection should be connected to the
TDS14061 HVAC Modbus Master interface
with the supplied cable.
Connections:
Power Consumption:
Max. 80mA
Dimensions:
115 W x 63 H x 32 D (mm)
Net | Gross weight:
0,230 kg | 0,350 kg
Packaging content:
TDS20063xx module
Cable for connecting with TDS14061
TELETASK Data Sheet EN
137
Update May 2013
General Interfaces
IP protection rate:
Operation range
IP30
Temperature
0°C to +45°C max.
Relative humidity
5% to 80% at 25°C (no humidity/condense)
Limited warranty:
2 years
Device compatibility list:
FUJITSU
DS20063FU
Outdoor unit types
Indoor unit types
AJ
AUXB
AUXD
ARXA
ARXB
AB*A
AS*A
AS*E
Schematic Drawing:
TELETASK Data Sheet EN
138
Update May 2013
General Interfaces
TDS15200
Airco interface licence
By means of this powerful software interface it is possible to integrate (bidirectional) an air conditioning system with the TELETASK Home
automation system.
This license supports ‘cool’, ‘heat’, ‘auto cool/heat’, ‘fan’, ‘fan speed
control’, ‘direction’,
Current system included into the licence:
DAIKIN systems (through iTouch).
Mitsubishi Electric: VRV system (through GB50 or AG150 gateway).
Application:
To control the an IP controllable airco system.
Example: you can control the airco temperature
settings on a TELETASK touch panel/touch screen.
At the other hand you can also control the airco
indoor unit with the airco remote control, and verify
the new settings on the displays of the TELETASK
system,
and much more.
Characteristics:
The system works with the information from the airco
temperature sensors (no TDS12250xx temperature
sensors are needed for this application).
DAIKIN: A DAIKIN "iTouch" unit and software
licences DCS004A51 or DCS007A51 are required.
You can control up to 128 units.
MITSUBISHI El.: A MITSUBISHI Electric GA150 or
GB50 Gateway is required. Up to 50 units can be
controlled.
On top you can still control up to 50 zones using
TELETASK sensors.
Settings:
Set up the IP address on the airco interface.
Configuration:
TELETASK configuration via PROSOFT Suite (V3.2
and higher).
Connections:
The TELETASK DOIP central unit and the airco IP
unit are to be connected on a Local Area Network
(Ethernet/LAN). De TELETASK DOIP Central Unit is
equipped with default LAN connections. Only this
TDS15200 licence is needed.
Power Consumption:
Not applicable.
Dimensions:
Software license packed in envelop.
175 L x 25 W x 5 T (mm).
Net | Gross weight:
0,090 kg | 0,130 kg
TELETASK Data Sheet EN
139
Update May 2013
General Interfaces
Schematic Drawing:
TELETASK Data Sheet EN
140
Update May 2013
General Interfaces
TDS14021
Galaxy interface 32 zones
TELETASK Interface to connect a Honeywell GALAXY (type 8, 18, 60 or 500)
or a GALAXY G3 or a GALAXY DIMENSION security system to the TELETASK
system.
This interface makes it possible to use the motion detectors of the Security
system to control domotics functions, such as lighting or heating/Cooling.
When the security system sets an alarm, the TELETASK system will be
immediately triggered. Depending on the configuration this could call a
TELETASK function. For example, a general mood called ‘ALARM’.
Application:
This interface makes it possible to use up to 32 motion
detectors of the Security system to control a domotic
function. The detector status is automatically
transmitted to the TELETASK system via the interface.
Characteristics:
The TELETASK Galaxy interface is to be connected to
the Galaxy RS232 interface or the build-in RS232 port
(GALAXY G3 or DIMENSION series).
Settings:
Functions
With PROSOFT Suite.
Add up to four TDS14021 interfaces in PROSOFT
(consecutive addresses) whereas the RS232 module is
addressed with the first (lowest) address.
One added interface equals 8 detectors/events.
ATTENTION: a GALAXY event (alarm, armed,
disarmed, part-armed, part-disarmed) can not be
used within a TELETASK motion detection or
transparent function!
AUTOBUS address
Through rotary switches Tens + Units.
GALAXY zones
GALAXY zones that can be detected start from 1001 to
2048 and from 3001 tot 4148.
(GALAXY G3/DIMENSION: on board zones are 1001
to 1016)
GALAXY events
GALAXY events that can be used, are: ALARM /
ARMED / PART-ARMED / DISARMED / PARTDISARMED.
GALAXY
Communication
In the menu 56 ‘communication’ select ‘RS232
module’, mode=direct, format=SIA (level 1, triggers
ON: 02 Intrude, 10 setting, 11 reset cancel),
account=123456, baud rate=19200 (1 stop, 8 data, no
parity).
Installation:
Connections:
DIN rail mounting
AUTOBUS
By the enclosed AUTOBUS connector.
Galaxy serial interface Screw terminals (4 wires, max. 10m).
Power Consumption:
Max. 90 mA
Dimensions:
152 W x 78 H x 48 D (mm) (8,5 modules)
TELETASK Data Sheet EN
141
Update May 2013
General Interfaces
Gross weight:
0,270 Kg
IP protection rate:
IP20
Schematic Drawing:
JUMPER 2
JUMPER 3
CLOSED
CLOSED
JUMPER 2
JUMPER 3
CLOSED
CLOSED
JUMPER 4
OPEN
OPEN
CLOSED
CLOSED
JUMPER 5
OPEN
CLOSED
OPEN
CLOSED
# addresses
4 (standard)
3
2
1
JUMPER 4
OPEN
OPEN
CLOSED
CLOSED
JUMPER 5
OPEN
CLOSED
OPEN
CLOSED
# addresses
4 (standard)
3
2
1
ATTENTION: At the GALAXY G3 or DIMENSION unit it is necessary to switch Dipswitch 8 OFF.
TELETASK Data Sheet EN
142
Update May 2013
General Interfaces
Replaceable relay for MICROS
Application:
TDS90122
Replaceable relay for an internal relay of the MICROS
central unit. Suitable for high inrush current.
MICROS Spare RAM kit
TDS90122
Application:
REPLACING THE RAM chips (set of two) in the
MICROS central unit.
Set of 10 LED’s
TDS902xx
Application:
Characteristics:
LED’s for INP08D-IN feedback input interface
TDS12127
LED
Pre wired LED diameter 3mm
Order numbers
TDS90250
TDS90251
TDS90252
Red
Green
Yellow
Installation:
To be placed in drill opening of 3mm
Connections:
On INP08D-IN feedback between the screw connectors
OUT en +12V BUS
Related products:
TDS12127
Set van 3x10 LED’s
TDS90253
Application:
Characteristics:
LED’s for INP08D-IN feedback input interface
TDS12127
LED
10 x LED diameter 3mm red
10 x LED diameter 3mm green
10 x LED diameter 3mm yellow
Installation:
To be placed in drill opening of 3mm
Connections:
On INP08D-IN feedback between the screw connectors
OUT en +12V BUS
Related products:
TDS12127
TELETASK Data Sheet EN
143
Update May 2013
General Interfaces
TDS56421B
Demo case NANOS
This democase is intended to be used for:
Practicing the configuration of a TELETASK System
Basic training about cabling and connecting
Commercial demo, including wireless GUI’s (Graphical User
interfaces) on PC, Smartphone, iPhone and iPod Touch.
Exercises and demo of the integration of IP camera’s on the GUI’s
(built-in Wi-Fi router + IP-camera)
The case contains an illustrated presentation panel, technical interfaces,
AURUS-4, AURUS-OLED, light sensor
The mains cord is the only connection you have to make for a complete
PROSOFT and GUI demo.
Application:
Characteristics:
Settings:
Training, demo, programming practice.
Mechanical
Ruggedized case with technical interfaces,
presentation panel and large top compartment for
documents, samples etc.
Electrical
Plug-in connector for 100-240VAC power cord.
The mains adapter of the Wi-Fi router only suited for
230V application (internally connected; can be
exchanged by customer).
Content
TDS10200 NANOS Central Unit
TDS10130 Power Supply
TDS12021 AURUS-4
TDS12022 AURUS-OLED
TDS12116 Digital input interface
TDS12270 Light sensor
TDS12309 Analog input interface
TDS12502 Remote control
TDS13500 Relais interface
TDS13525 DC Motor interface
TDS13608 Dimmer interface
TDS15101 Licence for iSGUI (mobile phone)
TDS15105 Licence for GUI+ (PC)
Wi-Fi access point
IP- colour camera
Installation:
Connections:
Carry case – Ready to use.
Electrical
Plug-in connector for 110/230V power supply cord.
LAN
WIFI access point on board.
Power Consumption:
Not applicable
Dimensions:
600 x 450 x 220 mm
Net | Gross weight:
12.7 | 13 kg
TELETASK Data Sheet EN
144
Update May 2013
General Interfaces
Schematic drawing:
TELETASK Data Sheet EN
145
Update May 2013
General Interfaces
TDS90002PB
LATUS family Wallbox for PLASTER BOARD
This wallbox should be used when installing a LATUS in a
‘hollow’ wall, such as plaster board or wood board walls.
The wallbox is specially processed for a LATUS touch window.
Application:
Installing a LATUS touch window in a hollow wall
Installation:
See schematic drawings. To be placed in a slotted
hole 68x182mm with extra removed border (!). Use
Bticino PBD68 tool.
Connections:
Not applicable
Power Consumption:
Not applicable
Dimensions:
183 W x 69 H x 51 D (mm)
Net | Gross Weight:
0,050 kg |0,50 kg
TELETASK Data Sheet EN
146
Update May 2013
General Interfaces
Schematic Drawings:
TELETASK Data Sheet EN
147
Update May 2013
General Interfaces
TDS90030
Flush mounting for AURUS-4, AURUS-OLED, AURUS-TFT
Mount the AURUS-4, AURUS-OLED or AURUS-TFT flat into your walls.
This Flush Plaster Box can be used to give a beautiful finish to the AURUS
family. It is aesthetic (the touch panel is nicely integrated in the wall) and it
gives an extra protection against theft in public areas. For plaster board
(hollow wall) mounting an extra TDS90031 Alu-frame is needed (plaster
box + alu Frame).
An instruction Video is available on YouTube (“TDS90030 flush mounting
video”) showing the installation of the Flush Plaster Box (all phases
included). Thanks to the supplied suction pad, the touch panels/screens
are removable. Of course, NEVER use a screw driver to remove a touch
panel!
Application:
Installation:
Flush mounting for AURUS-4, AURUS-OLED or
AURUS-TFT.
Theft protection.
Rem.: Normal operation of the temperature sensor
will be disturbed with flush mounting.
AURUS-4,
AURUS-OLED,
AURUS-TFT
Use Flush mounting box TDS90030 for flat
mounting. For hollow walls this has to be combined
with TDS90031.
Dimensions to be foreseen in the wall (W x H x D):
Solid wall: 194 x 244 x 40(*)mm
Hollow wall: 160 x 210 x 42(*)mm
* Foresee enough depth to allow the AUTOBUS
cables coming from the back.
Dimensions:
150 W x 200 H x 40 D (mm)
Net | Gross Weight:
0,850 kg |1,000 kg
Packaging content:
TDS90030 Plaster block
Suction cup for AURUS removal
Aluminium adaptor plate (for AURUS-4, AURUSOLED)
TELETASK Data Sheet EN
148
Update May 2013
General Interfaces
Schematic Drawing:
TELETASK Data Sheet EN
149
Update May 2013
General Interfaces
TDS90032
Flush mounting for AURUS-2
Mount the AURUS-2 flat into your walls. This Flush Plaster Box can be
used to give a beautiful finish to the AURUS-2. It is aesthetic (the touch
panel is nicely integrated in the wall) and it gives an extra protection
against theft in public areas. For plaster board (hollow wall) mounting an
extra TDS90031 Alu-frame is needed (plaster box + alu Frame).
An instruction Video is available on YouTube (“TDS90030 flush mounting
video”) showing the installation of the Flush Plaster Box (all phases
included). Thanks to the supplied suction pad, the touch panels/screens
are removable. Of course, NEVER use a screw driver to remove a touch
panel!
Application:
Installation:
Flush mounting for AURUS-2.
Theft protection.
Rem.: Normal operation of the temperature sensor
will be disturbed with flush mounting.
AURUS-2
Use Flush mounting box TDS90032 for flat
mounting. For hollow walls this has to be combined
with TDS90031.
Dimensions to be foreseen in the wall (W x H x D):
Solid wall: 194 x 244 x 40(*)mm
Hollow wall: 160 x 210 x 42(*)mm
* Foresee enough depth to allow the AUTOBUS
cables coming from the back.
Dimensions:
150 W x 200 H x 40 D (mm)
Net | Gross Weight:
0,800 kg |0,950 kg
Packaging content:
TDS90030 Plaster block
Suction cup for AURUS removal
Schematic Drawing:
TELETASK Data Sheet EN
150
Update May 2013
General Interfaces
TDS90035
On-wall box for AURUS family
The AURUS on-wall box TDS90035 is to be used for on-wall mounting of
the AURUS-family interfaces. In case you have a concrete, marble, etc
wall where you can’t (or you are not allowed) to put a standard in-wall box
or a flush- wall box, the TDS90035 will offer you the proper design solution.
This plastic wall box has an anthracite (dark- grey) color, similar to the back
of the AURUS.
Application:
Installation:
Box for on-wall mounting of AURUS family
AURUS family
On-wall mounting of AURUS family members.
The TELETASK wall bracket (supplied with the
AURUS unit) is to be mounted inside the
TDS90035. Follow the instructions.
You can connect your AURUS unit with the
AUTOBUS (and optional Ethernet cable for
AURUS-TFT) in different ways. Cable(s) can enter
from the back (if behind the wall). But if the cable(s)
are fed through on-wall conduit(s), break-out holes
are provided for up to two cable glands (included
with the package).
Dimensions:
86 W x 86 H x 36 D (mm)
Net | Gross Weight:
0,055 kg |0,200 kg
Packaging content:
TDS90035 On-wall box
2x cable glands
2x self-tapping screws
TELETASK Data Sheet EN
151
Update May 2013
General Interfaces
Schematic Drawing:
TELETASK Data Sheet EN
152
Update May 2013
General Interfaces
TDS90165
AUTOBUS to 5 x RJ45 Splitter Box
This AUTOBUS splitter box is to be used when you have multiple
universal RS232 interfaces installed together. All can be connected to the
AUTOBUS in a fast, reliable and pluggable way by using this splitter box.
This way you only need to make one AUTOBUS-cable connection. The
other ones are simply plugged in the splitter box. Up to five universal
RS232 interfaces can be patched to the splitter box. The AUTOBUS patch
cable is supplied with the universal RS232 interface.
Application:
Connections:
Connecting multiple RS232 interfaces
(TDS14042) on AUTOBUS in fast, reliable
and pluggable way.
AUTOBUS
AUTOBUS connector set (supplied with
the interface)
Outputs
5 x RJ45 AUTOBUS configured
Screw terminals; max. 4mm² (solid) or
2,5mm² (stranded)
Power Consumption:
0 mA
Dimensions:
110 W x 30 H x 40 D (mm)
Net | Gross Weight:
0,100 kg |0,140 kg
Packaging content:
Splitter box
IP protection rate:
IP20
TELETASK Data Sheet EN
153
Update May 2013
General Interfaces
Schematic Drawing:
TELETASK Data Sheet EN
154
Update May 2013
General Interfaces
TDS90006
AUTOBUS network cable 2+4
The TELETASK AUTOBUS cable is used to connect all the TELETASK
interfaces with each other. The interfaces are connected according a bus
topology: one interface is connected after the other.
Application:
Characteristics:
The TELETASK AUTOBUS cable is used to connect all the
TELETASK interfaces and the central unit with each other.
Mechanical
Bright blue colour. Max. cable length: 1km.
The AUTOBUS cable contains six copper conductors: 4 x 0.22 mm²
(data transmission) + 2 x 1.00 mm² (power supply) and electromagnetic shielding.
The insulations are made from low smoke polyvinyl-chloride (PVC).
PVC is conforming to the UL94-V0 standard.
The 2 insulations from the 1,00mm² wires are treated with a non
migrating Pet-sp tape.
The electromagnetic shielding is made from a 100% covering
aluminium + polyester tape (LAP).
Electrical
High speed bus cable with velocities up to 1Megabit.
Insulation voltage:
Of the covering blue sheath: 3500V (test)
Of the red and black sheath: 2000V (test).
Of the blue, white, green and yellow sheath: 2000V (test).
Operating voltage:
Of the red and black wire (1mm²): 13,5V
Of the blue, white, green and yellow wire (0.22mm²): 5V.
Operating Temp.
-10 °C / +80 °C
Installation:
Connections:
Dimensions:
Net | Gross Weight:
TELETASK Data Sheet EN
Built-in electrical tubes.
Central Unit
Use the plug-in connector in the TELETASK central unit.
!!! Always connect the shielding of the AUTOBUS on through the
AUTOBUS connector (5th pin).
Interfaces
Use the special AUTOBUS connector set, delivered with every
TELETASK interface. The colours correspond with the wires of the
AUTOBUS connector set.
!!! Link every cable from the AUTOBUS including the shielding
according the bus system using the AUTOBUS connector set.
!!! Star topology cabling is NOT allowed.
Diameter:
Length:
Packaging:
6. 5 mm +/- 0.2 mm
Reels of 100 m
39 x 39 x 9 cm
6,14 kg | 6,14 kg
155
Update May 2013
General Interfaces
TDS90006HF
AUTOBUS halogen free network cable 2+4
The TELETASK halogen free AUTOBUS cable is used to connect all the
TELETASK interfaces with each other. The interfaces are connected according
a bus topology: one interface is connected after the other.
This halogen free version has not only fire retarding and low toxic emission
features, but is also ‘low smoke’ (little smoke generation). Both the inside and
the outside polymer jackets of the TDS90006HF are halogen free.
The specifications of the used compound comply to:
CEI 20-11 M1
VDE 0207 Part t24, type HM2
VDE 0250 Part 215, type HM5
HD 21-14 S1, type TI6.
The emission of halogen acids is restricted to <0,1%
(measurement method CEI 20-37).
Application:
Characteristics:
The TELETASK halogen free AUTOBUS cable is used to connect
all the TELETASK interfaces and the central unit with each other.
Mechanical
Light blue color.
Max. cable length: 1km.
The AUTOBUS cable contains six copper conductors: 4 x 0.22
mm² (data transmission) + 2 x 1.00 mm² (power supply) and
electro-magnetic shielding.
The insulations are made from non-corrosive thermoplastic free
of halogens and are low smoke zero halogen (LSOH). Conforming to
the UL94-V0 standard.
The wires are treated with a non migrating Pet-sp tape.
The electromagnetic shielding is made from a 100% covering
aluminium + polyester tape (LAP).
Electrical
High speed bus cable with velocities up to 1Megabit.
Insulation voltage:
Of the covering blue sheath: 3500V (test)
Of the red and black sheath: 2000V (test).
Of the blue, white, green and yellow sheath: 2000V (test).
Operating voltage:
Of the red and black wire (1mm²): 13,5V
Of the blue, white, green and yellow wire (0.22mm²): 5V.
Operating Temp.
-10 °C / +80 °C
Settings:
None
Installation:
Built-in electrical tubes.
Connections:
TELETASK Data Sheet EN
Central Unit
Use the plug-in connector in the TELETASK central unit.
!!! Always connect the shielding of the AUTOBUS on through the
AUTOBUS connector (5th pin).
Interfaces
Use the special AUTOBUS connector set, delivered with every
TELETASK interface. The colours correspond with the wires of
the AUTOBUS connector set.
!!! Link every cable from the AUTOBUS including the shielding
according the bus system using the AUTOBUS connector set.
!!! Star topology cabling is NOT allowed.
156
Update May 2013
General Interfaces
Dimensions:
Net | Gross Weight:
TELETASK Data Sheet EN
Diameter:
Length:
Packaging:
6. 5 mm +/- 0.2 mm
Reels of 100 m
39 x 39 x 9 cm
6,14 kg | 6,14 kg
157
Update May 2013
General Interfaces
TDS90007
AUTOBUS network cable 2+4 in flexible tube
The TELETASK AUTOBUS cable in a flexible tube of 20 mm is used to connect
all TELETASK interfaces with each other. The interfaces are connected
according a bus topology: one interface is connected after the other.
Application:
Characteristics:
The TELETASK AUTOBUS cable is used to connect all
TELETASK interfaces and the central unit with each
other.
Mechanical
Bright blue colour.
Max. cable length: 1km.
The AUTOBUS cable contains six copper conductors: 4
x 0.22 mm² (data transmission) + 2 x 1.00 mm² (power
supply) and electro-magnetic shielding.
The insulations are made from low smoke polyvinylchloride (PVC). PVC is conforming to the UL94-V0 standard.
The 2 insulations from the 1,00mm² wires are treated
with a non migrating Pet-sp tape.
The electromagnetic shielding is made from a 100%
covering aluminium + polyester tape (LAP).
The flexible tube is conform the standard EN 50 086-2-2
Electrical
High speed bus cable with velocities up to 1Megabit.
Insulation voltage:
Of the covering blue sheath: 3500V (test)
Of the red and black sheath: 2000V (test).
Of the blue, white, green and yellow sheath: 2000V
(test).
Operating voltage:
Of the red and black wire (1mm²): 13,5V
Of the blue, white, green and yellow wire (0.22mm²): 5V.
Operating Temp.
-10 °C / +80 °C
Settings:
None
Installation:
In wall mounting
Connections:
TELETASK Data Sheet EN
Central Unit
Use the plug-in connector in the TELETASK central unit.
!!! Always connect the shielding of the AUTOBUS on the
special lip in the central unit.
Interfaces
Use the special AUTOBUS connector set, delivered with
every TELETASK interface. The colours correspond with
the wires of the AUTOBUS connector set.
!!! Link every cable from the AUTOBUS including the
shielding according the bus system using the AUTOBUS
connector set.
!!! Star topology cabling is NOT allowed.
158
Update May 2013
General Interfaces
Power Consumption:
Dimensions:
Gross weight:
TELETASK Data Sheet EN
Not applicable
Cable diameter:
Tube diameter:
Cable Weight:
Length:
6.5 mm +/- 0.2 mm
20 mm
55,1 kg/km
Reels of 100 m
12,240 kg
159
Update May 2013
Version changes
VERSION
V145
V146
V147
V148
V149
DATE
V150
V151
V152/153
V154
V155
V156
V157
V158
V159
V160
V163
V167
V168
V169
V170
V171
V172
V173
V174
V175
V176
V177
V178
V179
V180
TELETASK Data Sheet EN
MODIFICATION
NEW TDS15200 DAIKIN Interface
TDS10200 updated inrush current
TDS12310 added application examples
TDS12124/TDS12125 changed text and drawing
TDS10012 changed drawings
TDS14021 changed drawing
TDS12125/TDS12125
TDS13610 changed text
Added AUTOBUS connector set / patch cable supplied
TDS12310 changed text
TDS12129 changed text
TDS10200 changed picture
System limits changed
TDS10202 added text
TDS12502 changed text
TDS10200 changed text + technical drawing added
Changed TDS12270B to TDS12270xx
Raised version number
TDS13610 Changed image
TDS14021 changed text and schematic drawings
TDS13603 Changed text
TDS14021 Minor corrections
TDS15101 added
TDS15101 Drawing added
TDS12129 changed text and drawing
TDS12131 added
TDS14050 changed text
TDS15100 added
TDS56421 added
TDS14042 added
TDS12003 added
TDS56421 changed text and drawing
TDS12021 added
TDS13224 added
TDS12001 & TD12015 order codes changes
TDS12310 changed drawing
TDS15502 added info
TDS15100 & TDS15101 Camera remark added
TDS12017 changed text
TDS90002PB added
TDS12003 changed drawing
TDS13500 changed drawing
TDS12021 changed drawing
TDS12022 added
TDS12110 added a remark
TDS90410 added
Added dimensions for SERVUS wallbox
Change eexplanation about Local Mood
TDS13221 added
TDS14104 & TDS14108 added
Category asseccoires changed to miscellaneous
Minor changes TDS12510, TDS14030
TDS13502 added
TDS15200 Changed
TDS13221 Changed
TDS13224 Changed
TDS14104 Changed
160
Update May 2013
Version changes
V181
V182
V183
V184
2011-08-24
V185
2011-10-24
V186
2012-03-12
TELETASK Data Sheet EN
TDS14108 Changed
TDS14042 Changed cable limits
TDS13608 Added Ω value
TDS10012 Added Ω value
TDS13610 Added Ω value
TDS13226 Added
TDS13620 Added
Added chapter Qualification
TDS13226 Update
TDS13620 Update
TDS13621 Update
TDS14043 Update
TDS14042 Changed number of sources from 8 to 16
TDS12250 Changed Ideal build-in height to 1,5m
TDS12260 Changed Ideal build-in height to 1,5m
TDS12270 Changed Ideal build-in height to 1,5m
TDS13221 Changed
TDS13224 Changed
TDS14104 Changed
TDS14108 Changed
TDS14042 Changed cable limits
TDS13608 Added Ω value
TDS10012 Added Ω value
TDS13610 Added Ω value
TDS13226 Added
TDS13620 Added
Added chapter Qualification
TDS13621 Update
TDS14043 Update
TDS12250 Changed Ideal build-in height to 1,5m
TDS12260 Changed Ideal build-in height to 1,5m
TDS12270 Changed Ideal build-in height to 1,5m
TDS13620 Update
TDS13500 Update
Added modules IP rate
TDS10012 Update settings
TDS10200 Update settings
TDS12020 Added
TDS12021 Update picture
TDS12022 Update characteristics + picture
TDS12064 Added
TDS12051 Added
TDS12052 Added
TDS12053 Added
TDS12129 Update all
TDS14050 Update schematic drawing
TDS15105 Added
TDS13620 Update characteristics + error display
TDS14036 Update characteristics + schematic drawing
TDS14041 Update schematic drawing
TDS14042 Update schematic drawing
TDS14045 Update schematic drawing
TDS56421 Update all
TDS90165 Added
TDS10012 Added power consumption
TDS10200 SW1+SW2 correction
TDS12020 update
TDS12064 update
TDS12051 update
161
Update May 2013
Version changes
V187
2012-09-07
V188
2013-04-2
TELETASK Data Sheet EN
TDS12052 update
TDS12053 update
TDS12129 update
TDS13608 added min. load
TDS14036 added BOSE lifestyle specification
TDS90006HF added
TDS20101 added
TDS20110 added
TDS90030 added
TDS90032 added
TDS13608 added min. supply voltage
TDS12125 update
TDS12051 added Hz range
TDS12052 added Hz range
TDS12053 added Hz range
TDS14104 added supported audio formats
TDS14108 added supported audio formats
TDS13204 update MICROS+ ref.
TDS13212 update MICROS+ ref.
TDS14042 update cable set
TDS15101 update content
TDS13226 new specifications
TDS10119 added
TDS10012 multiple centrals described + increased # sensor zones
TDS10200 increased # sensor zones
TDS15101 update specs + content + update activation
TDS15105 update content
TDS15100 update content + update activation
TDS15200 update content
TDS12250 update dimensions
TDS12260 update dimensions
TDS12270 update dimensions
TDS12020 removed B&O references
TDS12021 removed B&O references
TDS12022 removed B&O references
TDS12051 update specs
TDS12052 update specs
TDS12053 update specs
TDS14021 update compatibility
TDS10012 increased # of rooms to 500
TDS10200 increased # of rooms to 500
TDS10119 update schematic drawing
TDS12001 added cleaning instructions
TDS12003 added cleaning instructions
TDS12015 added cleaning instructions
TDS12020 added cleaning instructions + on-wall mounting
TDS12021 added cleaning instructions + on-wall mounting
TDS12022 added cleaning instructions + on-wall mounting
TDS12064 added cleaning instructions + on-wall mounting + passcode
TDS12116 updated with pulse counter possibilities
TDS12260 added temperature range
TDS12285 new
TDS12310 added input impedance
TDS14061 new
TDS20061 new
TDS20062 new
TDS20063 new
TDS15101 added BlackBerry 10 compatibility
TDS15105 added Windows 8 compatibility
162
Update May 2013
Version changes
TDS1511x new
TDS20110 update indoor range
TDS20620 new
TDS13620 add addressing tool TDS20620
TDS90035 new
TDS12140xx deleted
TDS12201 deleted
TDS12016 deleted
TDS12127 deleted
TDS12005 deleted
TDS12008 deleted
TDS12017 deleted
TDS12061 deleted
TDS12110 deleted
TDS12131 deleted
TDS13204 deleted
TDS13212 deleted
TDS13224 deleted
TDS13603 deleted
TDS14030 deleted
TDS14036 deleted
TDS14041 deleted
TDS14045 deleted
TDS14050 deleted
TDS14060 deleted
TELETASK Data Sheet EN
163
Update May 2013
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement