Product information Turntable

Product information Turntable
Product information
Pro-Ject RPM 9.1X
Manual turntable
A quiet running AC motor with a two-step acryl pulley drives the platter's outside edge via a belt.
The transparent acrylic plinth stands on three height-adjustable Sorbothane®-damped aluminium cones.
A supplied spirit level allows easy adjustment.
The motor is mounted in a separate metal housing to eliminate vibration transmission.
The resonance-optimised platter is a sandwich construction utilising an acrylic platter weighing 3,5Kg
and a brass record puck.
The inverted bearing uses a stainless-steel axle carrying a ceramic ball on which the ceramic bearing plate runs.
Central metal block optimises centre of gravity and damps main bearing.
Connection to the phono input of the amplifier can be made with connecting cables of your taste through
the gold plated phono sockets and earth screw. A standard cable is provided.
External power supply avoids potential electro-mechanical interference.
Tonearm Pro-Ject 9cc
The headshell and armtube are fashioned from a single piece of carbon-fibre.
Conical armtube avoids standing wave reflections.
Inverted tonearm bearing comprises four hardened stainless tips in ABEC7 spec ballraces.
Rings provide very solid arm bearing housings. The outside ring is open to avoid resonances.
Design of counterweight effectively counteracts unwanted resonances.
The counterweight supplied is suitable for cartridges weighing between 6 - 10g. Alternative counterweights for
cartridges weighing between 8 - 11g and 11 - 15g are available as an accessory part.
Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing
warped records.
Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).
Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.
The straight armtube with an effective length of 9" reduces toe-in error.
Silicone-damped armlift can be adjusted to suit working height of the arm.
The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated
phono sockets.
Dimensions W x H x D: Including motor unit 440 x 180 x 325mm.
Dust cover Cover it optional. W x H x D: 525 x 290 x 425mm.
The manufacturer reserves the right to alter the technical specifications without notice.
Pro-Ject Audio Systems ist ein Produkt von Heinz Lichtenegger
1050 Wien · Maragretenstr. 98 · Telefon +43(0)15448580 · Telefax +43(0)15456697 · © Heinz Lichtenegger · Revision 27.3.06
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF