wiring instructions: ac-dc linear power modules
WIRING INSTRUCTIONS: AC-DC LINEAR POWER MODULES
Chassis Mounted Units
+5V
S1
F1
S2
TOP VIEW
2.5”
F2
12/15
5
CMN +12/+15 CMN -12/-15
DUAL SWITCHABLE AC INPUT VOLTAGE
TRIPLE OUTPUT CHASSIS MOUNT
115/220VAC INPUT
4.75”
•
Case Height dimensions can be: 1.56” or 2.0”
depending on model
•
Wire primaries in parallel for 115Vin Series
for 220Vin
•
S = Start of Primary Winding
•
F = Finish of Primary Winding
•
For lower voltage operation wire AC input in
parallel and connect S1 and S2 and F1 and F2
together and excite across
•
For higher voltage operation put winding in
series and wire F1 to S2 and excite S1 and F2
P.O. Box 398, Paterson, New Jersey 07544 U.S.A. • Tel: (973) 345-5885 • Fax: (973) 345-1264 • [email protected] • www.polytrondevices.com
© Polytron Devices, Inc., 3-15-2016
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement