A-504D 2way Dual Channel In-ceiling Speaker Redefining the way you experience sound.™ Applications: This speaker combines two separate voice coils and a dual cone design, allowing both right and left channels of a stereo signal to be attached to a single speaker. Where fidelity, stereo sound and affordability are needed from a single point source, this speaker is the answer. Technical Information: Model Name/Number: Primary Use: Series: System Type: Frequency Response: Sensitivity: Recommended Power: Drive Units: Tweeter Protection: Crossover Frequency: Crossover Slope: Impedance: Color: Grille: Installation Bracket: Blank Plate: New Construction Bracket: Rear Enclosure: Video Shielding: Finished Dimensions: Cutout Dimensions: Weight: Warranty: A-504D In-ceiling Architectural Series Dual Channel 60Hz — 14kHz ± 3dB 88dB (2.83 Volts @ 1 Meter) 10-75 Watts (1) 5¼” PolyGraphite Woofer (1) 1” Mylar Cone Tweeter N/A N/A N/A 8 Ohms x2 White Frame (paintable) White (paintable) Included BP-5R* NCB-5R* BC-5R* Yes 8¼” Dia. x 2½” D 6¾” Dia. 2 Lbs. 25 Years** *Sold Separately **Warranted for 25 (twenty-five) years from date of purchase to be free from defects and workmanship. For more information see your RBH dealer. RBH Sound Layton, Utah • USA (800) 5432205 • www.rbhsound.com It is the policy of RBH to constantly incorporate improvements into products; all specifications are subject to change without notice. Copyright © 2007, RBH Sound. All rights reserved.