Olympus | Infinity Stylus Infinity Stylus | User's Manual | Olympus Infinity Stylus Infinity Stylus User's Manual

Olympus Infinity Stylus Infinity Stylus User's Manual
INSTRUCTIONS
Description of controls
LCD panel
Shutter release button
Flash reflector
Autofocus windows
Lens barrier
Rewind button
Light sensor
Self-timer button
Flash mode button
Self-timer signal
Viewfinder
Autofocus indicator
Flash indicator
Viewfinder indicators
Close-up
correction marks
Autofocus frame
Strap Eyelet
Fill-in flash
LCD panel
Battery remaining indicator
Tripod socket
Film window
Back cover release
Battery compartment cover
AUTO/AUTO-S flash
Flash OFF
Exposure counter
2
Table of contents
Description of controls.................................... 1
Before you begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Loading the battery........................................ 5
Simple point & shoot photography .................... 7
Loading the film............................................ 7
Unloading the film........................................ 11
How to take pictures..................................... 13
Auto flash photography
(1) Taking pictures in low light......................... 18
Auto flash photography
(2) Taking backlighted subjects ........................ 20
3
Camera functions and controls........................ 21
Close-up (Macro) photography........................ 21
Focus lock.................................................. 22
Self-timer photography.................................. 24
Flash AUTO-S mode.................................... 25
Flash OFF mode.......................................... 27
FILL-IN flash mode .................................... 28
Attaching the strap /How to use the soft case..... 29
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Care and storage.......................................... 33
Specifications .............................................. 34
Thank you for purchasing the Olympus
Please read this instruction manual carefully before using the camera.
This camera will not operate unless the lens barrier is opened.
We also recommend that you shoot at least one roll of film to familiarize yourself
with the camera's features.
Symbols used in this manual
Correct
Incorrect
Operation
Order of operation
Operating sound
Lamp on
Lamp blinking
Attention
4
Automatic operation
Press lightly
Before you
begin
Open the battery compartment cover.
*Remove the battery if you do not plan to
use the camera for an extended period of
time.
Loading the
battery
5
Insert the new battery correctly as
indicated below and close the battery compartment cover tightly.
*Use a 3V lithium battery
(Duracell DL123A, Panasonic CR123A,
or equivalent.)
*Open the battery compartment cover
and remove the battery, as illustrated
below, when replacing the battery.
*Be sure to close the lens barrier when
replacing the battery.
Open the lens barrier as shown
below until you hear a "Click"
and check the battery power
remaining.
When
is displayed (Approx. 12
sec.), battery is OK.
If
flashes, battery is low, have spare
handy.
If
is displayed continuously, battery
should be replaced immediately.
*When closing the lens barrier, slide
gently to allow the lens to retract as the
barrier is being closed.
6
Simple point
and shoot
photography
Open the back cover by sliding
the back cover release toward the
top of the camera.
Loading
the film
This camera is
designed to use DX
coded 35 mm film to
automatically set film
speed. If DX-coded
film is unavailable,
use ISO 100 film.
7
The camera back will open.
Prepare a "DX" film cartridge.
The camera will set itself automatically for DX-coded film
speeds from ISO 50 to 3200.
Insert the film cartridge into the
camera.
Avoid direct sunlight when loading the film.
*When using non-DX film, the film
speed is automatically set to ISO 100.
8
Be sure the film is lying flat.
Align the film leader with the red film loading indicator.
Close the camera back firmly.
* Adjust the length of the film leader before loading so that it matches
with the red loading indicator.
Make sure the film leader tip is not bent and the film perforations are
(Make sure the back cover lock
properly aligned and engaged as shown.
9
snaps down.)
Open the lens barrier until you hear a "Click". Be sure the exposure
counter on the LCD panel will display a number "1" indicating the
first picture on the roll.
* If the film is improperly loaded, the LCD panel will display a blinking "E" as
shown in the illustration (B). In this case, open the back cover, and realign the
film leader.
10
* Use the window in the camera back
to check type of film loaded.
Unloading
the film
The camera automatically rewinds the film when you reach the end
of the roll. You will hear the motor operating and the exposure
counter will count down as the film is rewinding.
The final reading on the exposure counter before rewinding may be
more than the number of exposures specified for the film.
11
If you want to rewind the film before
the end of a roll, press the rewind button with the tip of a ballpoint pen.
Do not use any device with a sharp tip
and do not press the rewind button too
hard.
Open the back cover after the
motor has stopped.
Once the film has been rewound,
a blinking "E" will be displayed on
the LCD panel. Further operations are
not possible until the rewound film
cartridge is removed.
12
Remove the film cartridge from
the camera in the shade.
Slide the lens barrier as far as it will go until you hear a click.
(The shutter will not release unless the lens barrier is fully open.)
When the camera is not in use, always close this barrier so that the
How to take
pictures
shutter will not release accidentally. When the lens barrier is opened,
normal shooting mode (AUTO or AUTO-S) will be indicated
on the LCD panel. After 4.5 minutes, the LCD will go out.
13
Hold the camera correctly. Keep your fingers and the strap away from the lens, viewfinder
and flash reflector.
14
Position your subject within the
autofocus frame.
Press the shutter release button
lightly and confirm that the autofocus lamp (green) to the right
of the viewfinder is lighted.
15
The subject should be within the
picture frame.
*If the distance between the subject and
the camera is set at 0.35 m (1.1 ft.), the
picture area will be inside the close-up
Shooting range: From 0.35 m
(1.1 ft.) to— (infinity)
correction marks as shown in the
illustration.
*If the distance between the subject and
the camera is less than 0.35 m (1.1 ft.),
the autofocus lamp (green) to the right
of the viewfinder will blink and shutter
will not release.
However, the shutter may sometimes be
released erroneously when the subject
is extremely close to the camera.
16
Press the shutter release button
(Gently to minimize camera
shake.)
As soon as the shutter is
released, the film will automatically advance to the next frame.
You will hear the motor operating. The exposure counter will
advance to the next frame when
film winding is completed.
17
Auto flash
photography
If you are taking pictures in low light, the flash lamp (orange) to
the right of the viewfinder and the red lamp on the front of the camera
will light when the shutter release button is pressed halfway.
•While the flash is still charging and the flash lamp (orange) is blinking,
the shutter will not release.
•It takes about 3 sec. after the film is advanced to recharge the flash
(at normal temperatures).
(1) Taking
pictures in
low light
In low light situations,
the flash will activate
automatically when
the flash mode is
AUTO or AUTO-S.
18
Flash shooting range:
The flash will activate automatically
when the shutter release button is
fully pressed.
(ISO 100) 0.35 m (1.1 ft.)—3.5 m (11.5 ft.)
(ISO 400) 0.35 m (1.1 ft.)—7m (23 ft.)
*The flash range as shown below is optimal
for color negative film. Actual flash
working range for other film types
may vary.
19
Auto flash
photography
If you are taking backlighted
subjects, the flash lamp (orange)
and red lamp on the front of
the camera will light when the
shutter release button is pressed
halfway.
(2) Taking
backlighted
subjects
In backlighted situations,
the flash will activate
automatically when
the flash mode is
AUTO or AUTO-S.
20
This indicates that the flash will
activate automatically.
If the backlighted subject is so small
that it does not fill the autofocus
frame, the flash may not activate
automatically. In this case, use the
FILL-IN flash mode. (Refer to p. 27)
Camera
functions
and controls
*When the distance between the subject
and the camera is 0.35 m (1.1 ft.), compose your shot within the close-up
correction marks as shown in the
illustration.
Close-up correction marks
Close-up
photography
Be careful of the flash's
light when shooting
people's faces in closeup photography.
21
* When shooting within the close-up
range, to prevent blurred pictures
resulting from camera shake, set the
camera firmly in position (on a tripod,
for example).
Position your subject in the autofocus frame and press the shutter
release button halfway. The autofocus indicator (green) will light in
the viewfinder.
Focus lock
*When focus is locked, exposure settings are also locked (AE lock).
Use the locus lock
when you want to
position your subject
outside the autofocus
frame in the center
of the viewfinder.
22
While keeping the shutter release
Press the shutter release button
button pressed halfway, change
fully to take the picture.
the position of your subject in
*If you remove your finger from
the viewfinder to achieve the
the shutter release button while
desired composition.
the autofocus indicator (green) lights,
the focus lock will be canceled.
23
While pressing the self-timer button
press the shutter release
button
fully to activate the self-timer. The shutter will be
released 12 seconds later
Self-timer
photography
*Be sure the subject is in the autofocus frame.
*The red lamp on the front of the camera will light up for the first 10 seconds,
then blink rapidly for 2 seconds until the shutter is released. To cancel the
self-timer, close the lens barrier or press the
button again.
*After the shutter is released, the self-timer mode will be automatically canceled.
24
Press the flash mode button
until " AUTO-S" appears on the
LCD panel.
Auto-S flash
photography
Compose your shot and press
the shutter release button — the
flash will emit a rapid series of
pre flashes, followed directly by
the main flash.
Hold the camera firmly while pressing
the shutter release button.
Auto-S flash significantly
reduces "Red-eye"
phenomenon (when a
subject's eyes appear red)
in flash portraits and
group photos.
25
Flash AUTO-S mode shooting range:
Press the flash mode button
until " OFF" appears on the
LCD panel.
(ISO 100) 0.35 m (1.1 ft.) —3.5 m (11.5 ft.)
(ISO 400) 0.35 m —7 m (23 ft.)
*To cancel Auto-S mode, press the flash
mode button again.
* Auto-S mode will not be canceled, when
the lens barrier is closed.
Flash
OFF mode
This mode is to be used
in situations where a
flash is prohibited
(as in museums) or
when not desired
(for special effects).
26
*In low lighting condition, the shutter
speed may be slow. Use a tripod or
other camera support to prevent the
effects of camera shake.
*With backlighting the subject may be
too dark.
Press the shutter release button
fully to take the picture.
*To cancel flash OFF mode press the
flash mode button again or close the
lens barrier.
FILL-IN
flash mode
The flash always
activates in this mode.
It can be engaged
for daylight synchro
photography or when
shooting backlighted
subjects.
27
*By using the flash FILL-IN mode, the
subject will be properly lit by the flash.
Press the flash mode button until
" FILL-IN" appears on the
LCD panel.
Press the shutter release button
fully to take the picture.
*To cancel Fill-in flash mode, press the
flash mode button again or close the
lens barrier.
28
Attach the strap to the camera
according to the directions illustrated below.
Attaching the
strap
Use of the
optional
Olympus
case
29
Be sure the lens barrier is closed
before the camera is inserted into the case.
30
Troubleshooting
release if the barrier has been left open over 4 hours.
Q: Will the camera operate without film?
A: Even if there is no film in the camera, if the lens
barrier is open, the shutter will release. Under low light
the flash will activate. If the lens barrier is closed, the
camera will not operate; and if the flash is activated in
rapid succession, the camera may get warm. (In the
latter case, pause between shots.)
Close and re-open the barrier once before shooting.
Q: The flash does not activate.
A: Check the flash mode.
Q: How long does the battery last?
A: Since lithium batteries have extra long lives, you can
shoot approximately 20 rolls of 24-exp. film. Using a
flash will shorten the life of a battery by about 50%;
thus if you use the flash less frequently, the battery will
last longer.
Q: The camera does not work in extremely cold weather.
What should I do?
A: In low temperature conditions, batteries temporarily
Q: The camera will not operate. What shall I do?
A: (1) Open the lens barrier fully. (2) Be sure the battery is
placed in the camera correctly and that the battery
power isn't low. (3) The camera will not operate when
the flash is recharging. (4) Be sure the subject is not
closer than the shooting distance. (5) The camera will
not operate until the camera back has been opened af-
lose performance. Try to keep the camera warm.
ter the film has been rewound. (6) The shutter will not
31
Q: The pictures aren't sharp. What's wrong?
A: In the following examples, the camera's autofocus
mechanism may not function properly. Use the focus
lock mechanism when taking pictures of:
a. (1) Objects that reflect too much light (2) Black
objects (3) Objects through glass windows or wire
screens (4) Subjects in which flames or smoke are
included (5) Subjects in which the sun is part of the
picture.
b. Subjects in high - light situations, such as summer sea
shores or snowy mountains.
Q: Where can I buy lithium batteries?
A: At your local camera dealer or nearest Olympus
service center. When purchasing batteries, order
Duracell DL123A or Panasonic CR123A, or equivalent.
32
Care and storage
*Do not expose the camera to extreme heat
(over 40°C or 104°F) or to extreme cold
(below -10°C or 14°F).
*Avoid sudden temperature change.
*Do not expose the camera to strong magnetic
fields.
*Do not apply excess force to the camera or its
controls.
*Do not rotate the camera once it is mounted on a
tripod. Avoid opening the camera when it is
mounted on a tripod.
*Do not touch the contact points inside the
camera.
33
*Do not use organic solvents, thinner or benzine to
clean the camera.
*Avoid high impact from bumping or dropping the
camera.
*Do not expose the camera to rain shower and
water.
*Never disassemble the camera; it contains a highvoltage circuit.
*Do not disassemble or expose batteries to excessive
heat.
*In case of malfunctions, consult your nearest
Olympus dealer, or nearest Olympus service
center.
Specifications
Type: Fully automatic 35 mm autofocus lens-shutter camera
Film format: 35 mm standard DX coded film (24 x 36 mm)
Lens: Olympus lens 35 mm F3.5, 3 elements in 3 groups
Shutter: Programmed electronic shutter
Viewfinder: Active type viewfinder type 0.4X (with autofocus frame, close-up correction marks, flash indicator,
AF indicator).
Focusing: Active type autofocus system, focus lock possible.
Focusing range: 0.35 m (1.1 ft.)— (infinity)
Exposure control: Automatic exposure control with
programmed electronic shutter. Automatic control range
with ISO 100 film: EV 7.5 (F3.5, 1 /15 set) to EV 17
(F16, 1/500 sec)
Exposure counter: Progressive type LCD panel
34
Selftimer: Electronic selftimer with 12-second delay (While
pressing the self-timer button, press the shutter release
button to activate self-timer. Red LED turns ON)
Film speed range: Automatic setting with DX-coded film
(ISO 50—3200). Actual setting at ISO 50, 100, 200,
400, 800, 1600 and 3200.
Film loading: Automatic loading, (automatically advances to
first frame when camera back is closed)
Film advance: Automatic film winding.
Film rewind: Automatic rewinding (automatic rewind activation at the end of film, automatic rewind stop), rewind
possible at any point with rewind button.
Flash: Built-in. Recycling time approx. 3 sec. (at normal
temperature). Flash range with color negative film:
ISO 100 film: 0.35 m (1.1 ft.) —3.5 m (11.5 ft.).
ISO 400 film: 0.35 m (1.1 ft.) —7 m (23 ft.).
Flash modes: AUTO (automatic flash activation in low light
and backlight), AUTO-S (automatic flash activation in
low light and backlight), OFF (no flash), and FILL-IN
(forced activation).
Battery check: Display on LCD
Lens barrier: Sliding type (with release lock)
Power source: 3V lithium battery (DL123A, CR123A or
equivalent)
Dimensions: 117 (W) x 63 (H) x 37 (D) (4.6" x 2.5" x 1.4")
Weight: 170 g (6.0 oz.) (without battery)
*Specifications and design are subject to change without
notice.
**Specifications according to a DL123A/CR123A power
source.
35
OLYMPUS OPTICAL CO., LTD.
San-Ei Building, 22-2, Nishi Shinjuku 1-chome, Shinjuku-ku, Tokyo, Japan. Tel. 03-3340-2211
OLYMPUS AMERICA INC.
Two Corporate Center Drive, Melville, NY 11747-3157, U.S.A. Tel. 516-844-6000
OLYMPUS OPTICAL CO. (EUROPA) GMBH.
(Premises/Goods delivery) Wendenstrasse 14-16, 20097 Hamburg, Germany. Tel. 040-237730
(Letters) Postfach 10 49 08, 20034 Hamburg, Germany.
OLYMPUS OPTICAL CO (UK.) LTD.
2-8 Honduras Street, London EC1Y 0TX, United Kingdom. Tel. 0171-253-2772
Copyright © OLYMPUS OPTICAL CO., LTD. (Tokyo)
PRINTED IN HONGKONG 0592 50MM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising