Omron Healthcare GOSMART HJ-112 User's Manual

Omron Healthcare GOSMART HJ-112 User's Manual
INSTRUCTION MANUAL
Pedometer
Model
HJ-112
CONTENTS
Before Using the Unit
Thank you for purchasing
the OMRON Pedometer.
Please read this Instruction
Manual before using this unit
to ensure safe and correct use.
Please keep this Instruction
Manual for your
future reference.
Safety Information .................................2
Features of the Product ..........................3
Components of the Product....................4
Names and Functions of the Parts ........5-6
About the Pedometer .............................7
How to Attach the Pedometer.............8-9
How to Insert the Battery................10-11
How to Replace the Battery .................12
How to Reset the System .....................13
How to Set Time, Weight,
and Stride Distance.........................14-18
How to Use the Unit
Procedure in Actual Use .................19-20
Memory Function ...........................21-22
Troubleshooting
How to Care and Store the Unit...........23
Troubleshooting ...................................24
Specifications .......................................25
Caution.................................................26
Limited One Year Warranty .................27
1
Before Using the Unit
Safety Information
Please read this section carefully before using this unit.
Warning
Keep the unit out of reach of young children.
• If a young child swallows battery, battery cover,
or screw, immediately consult with a doctor.
Caution
Do not swing the unit by holding the strap.
• You may injure yourself.
Do not throw the battery into fire.
• The battery may explode.
General Advice
• Do not disassemble or modify the unit.
• Do not subject the unit to severe shock, drop or step on unit.
• The main unit is not waterproof. Do not wash it or touch
it with wet hands.
• Do not wipe the unit with thinner, or abrasive cleaners.
• Avoid the unit being exposed to direct sunshine, high temperature,
high humidity, rain, and/or dust when using or storing the unit.
2
Before Using the Unit
Features of the Product
•
“Aerobic step” function helpful for
building your health
The unit can measure the number of “aerobic steps”
(continuous steps taken for more than 10 minutes), which
can be considered an effective exercise to burn body fat.
•
Number of steps can be measured
even during jogging.
By attaching the unit to your belt or the top of your pants
with the supplied holder, the number of steps during
jogging can also be measured.
•
Convenient memory function that
can show the data of seven days
The memory function supports the management
of daily walking.
•
Dual display function that can show both the
time and the number of steps simultaneously.
Before Using the Unit
3
Components of the Product
The following items are included in the box.
If any item is missing, please contact the nearest OMRON dealer.
1. Main unit
5. Clip for strap
6. Holder
2. Battery (CR2032)
3. Screwdriver
7. Instruction Manual
8. Warranty Card
4. Strap
4
Before Using the Unit
Names and Functions of the Parts
MEMORY/▲
Main Unit
Use this Button to
call up the data of
seven days.
Use this Button to
change time, weight,
and stride distance
when setting the unit.
Display
Displays the number
of steps, number of aerobic
steps, calorie, and distance.
Displays the time and the
duration of aerobic walk.
RESET Button
Press this Button for more
than 1.5 seconds to reset
the data of today to 0.
Use this Button to reset
time, weight, and stride
distance to the initial
values when setting
the unit.
SET Button
Press this Button for
more than 1.5 seconds
Holder so that the screen will
change to the setting
display. Use this Button
Strap to set time, weight, and
stride distance.
MODE Button
Clip
Use this Button to repeat
the display in the order of
number of steps, number
of aerobic steps, calorie,
and distance.
Back of the main unit
Battery cover
Screw of battery cover
SYSTEM RESET Button
Press the System Reset button
to delete past memory data,
and set data and reset to zero.
Before Using the Unit
5
Names and Functions of the Parts
Holder
Use this holder when attaching the unit
to your belt or the top of your pants.
1) Attach the main unit
to the holder.
2) Fasten the holder clip
to your pants.
Clip
How to attach
the strap to
the main unit
How to connect the
strap and the clip
3
Hole
to attach
the strap
How to release
from a clip and
fasten with a clip
To fasten
2
1
To release
6
Before Using the Unit
Bbb the Pedometer
About
Number of aerobic steps
The unit displays the total number of aerobic steps in a day that
satisfies the following two conditions: (The total duration you walked
as the number of aerobic steps is also displayed.)
• Walk more than 60 steps per minute
• Walk for more than 10 minutes continuously
Example: If you walk for 20 minutes at the speed of 120
steps per minute, the number of steady steps is 2400.
Note: Taking a rest for less than 1 minute during continuous
walking for more than 10 minutes is considered
as continuous walking.
Correction coefficient
for calorie display
Calorie display
The calorie display indicates
a calorie consumed by walking
and calculated from the weight,
stride distance, number of steps,
and walking speed.
The calorie display increment
is one minute. If you want to
know the target calorie value,
multiply the displayed calorie
by the coefficient in the table
shown below.
Example of correction:
Man
Woman
20’s
1.10
1.07
30’s
1.05
1.01
40’s
1.02
.97
50’s
1.01
.95
60’s
1.00
.95
70’s
.98
.96
80’s
.95
1.10
For the woman in her 50's with the calorie display of 300,
the consumed calorie is calculated as follows.
300 x 0.95 = 285 kcal
Before Using the Unit
7
How to Attach the Pedometer
We recommend that you place the unit in the upper front pocket
of your jacket, in a bag you hold tightly, or attach unit
to your pants or belt.
Place the unit in your pocket.
• Do not place the unit in the back pocket of your pants.
• We recommend that you attach the clip
on the edge of your pocket to prevent
the unit from dropping.
Place the unit in your bag.
Place the unit in your pocket or the
partition of your bag.
Attach the unit to your belt or the top
of your pants.
Use the supplied holder.
8
Aaa
Before
Using the Unit
How to Attach the Pedometer
The unit may not be able to count the steps correctly
in the following cases.
When the memory is being displayed or the unit is being set
• When the front of the main unit is placed in
the angle of less than 60° (shown to the right)
or horizontal to the ground.
60°
• The unit can count steps even
if it is slanted or placed upside-down, or if
the main unit is perpendicular to the ground.
30°
30°
60°
When the main unit moves irregularly
• When the main unit is placed in the bag that moves
irregularly because it hits your foot, your belt or the
top of your pants.
• When the unit hangs from your belt, the top
of your pants or a bag
When you walk at an inconsistent pace
• When you shuffle or wear sandals
• When you fail to walk consistently in a crowded place
When you use the unit in the place where lots of up
and down movements or vibrations take place
•
•
•
•
Standing up and/or sitting down movement
Playing sports other than walking
Ascending or descending movement at stairs or in a steep slope
Vertical or horizontal vibration in the moving vehicle such
as on the bicycle, in the automobile, trains or a bus
When you jog or walk extremely slowly
• The unit will count steps during jogging if it is attached
to your belt or the top of your pants with a holder.
Before Using the Aaa
Unit
9
How to Insert the Battery
1.
Remove the screw on the battery cover
located at the back of the main unit.
Use a supplied screwdriver or a commercially
available small screwdriver to remove the screw
on the battery cover.
2.
3.
Open the battery cover.
Insert a battery in the direction shown
in the figure.
Place the positive (+) side of a supplied battery
(CR2032) upward and insert the battery in the
direction of an arrow.
10 Before
Aaa
Using the Unit
How to Insert the Battery
4.
Close the battery cover.
Insert the projected portion of the
battery cover first.
5.
Tighten the screw on the battery cover.
The time setting display will appear in the
screen for approximately 5 minutes after the
battery is inserted. Set time, weight, and stride
distance according to the section on “How to
Set Time, Weight, and Stride Distance.”
General Advice on Battery Handling
• The supplied battery is for the monitor use only. The life of the battery
•
•
•
•
is approximately 6 months.
Replace the worn battery with a new one immediately.
Align the battery polarities (+ and -) correctly.
When handling the battery, carefully read the notes indicated on the battery.
Discard the worn battery according to the disposal regulations
of your local community.
Before Using the Aaa
Unit 11
How to Replace the Battery
When to replace the battery
Replace the battery with a new one (CR2032) when a
mark blinks.
• When the battery is removed, all the memory data and the set data
(time, weight, and stride distance) are deleted. Set time, weight,
and stride distance again.
• Be sure to write the important memory data on your notepad or notebook.
Refer to “How to Insert the Battery” for how to open the battery cover.
Take out the battery with a thin stick that is not easily breakable.
• Do not use a pair of metal
tweezers or a screwdriver.
• When a
mark starts to blink, the unit stops counting, the value
of the latest number of steps is turned on, and the time is displayed
as “
”.
• If you press the MODE Button when the
mark is blinking, you
can confirm the data of that day (number of steps, number of steady
steps, duration of steady walk, calorie, and distance). If you press
the MEMORY/▲ Button, you can see the memory data.
12 Before
Aaa
Using the Unit
How to Reset the System
In the following cases, press the SYSTEM RESET Button.
• When the battery is replaced
• When you want to delete the memory
• When the display becomes unrecognizable
1.
Press the SYSTEM RESET Button on the
back of the main unit with a thin stick that
is not easily breakable.
All the memory data and the set data (time,
weight, and stride distance) are deleted.
2.
Set time, weight, and stride distance again.
After all characters on the display are turned
on, a time setting display appears. Set time,
weight, and stride distance.
(Refer to”How to Set Time, Weight,
and stride Distance”.)
Before Using the Aaa
Unit 13
How to Set Time, Weight, and Stride Distance
Set the time, weight, and stride distance before using this unit
Measuring your stride length.
1) As illustrated, walk 10 steps with your normal stride.
2) Measure the distance from Start to End in inches.
3) Calculate your stride by dividing the total distance by 10.
Example:
Total distance = 320''
320'' ÷ 10 = 32'' inches (2' feet 8'' inches)
Conversion Chart
12'' inches = 1' foot
24'' inches = 2' feet
36'' inches = 3' feet
48'' inches = 4' feet
END
10
5
7
9
8
6
320"
14
Before Using the Unit
START
1
3
4
2
How to Set Time, Weight, and Stride Distance
1.
How to set the time.
Setting range: AM 12:00 - PM 11:59
•
Press the SET Button for more
than 1.5 seconds.
The time setting display will appear.
Time Setting Display
• A display of “Time” will blink.
•
Press the MEMORY/▲ Button
to set the time.
Initial setting of
“AM12” will blink.
Each time you press the Button, the time
will advance by 1 hour.
If you press the RESET Button, the display
of time will be reset to AM 12:00.
• If you leave the unit without setting the
time for more than 5 minutes, the screen
will show the number of steps.
•
During the time setting,
the displayed figures
will blink.
Press the SET Button to advance the
setting to minute.
A display of “minute” will blink.
During the time setting,
the displayed figures
will blink.
Before Using the Unit
15
How to Set Time, Weight, and Stride Distance
•
2.
Press the MEMOR /▲ Button to adjust
the minute.
Each time you press the MEMORY/▲
Button, the display of time will advance
by 1 minute.
Keep pressing the Button to fast forward
the display of time by 10 minutes.
If the display of minute reaches 59,
it will return to 00.
If you press the RESET Button, the display
During the minute
of minute will be reset to 00.
setting, the displayed
figures will blink.
• If you leave the unit without setting the
minute for more than 5 minutes, the
display will show the number of steps.
How to set the weight
Setting range: 70 to 300 lbs.
•
Press the SET Button to proceed to the
setting of weight.
A display of “weight” will blink.
The initial weight is set
to 88 lbs. During the
weight setting, the
displayed figures
will blink.
16
Before Using the Unit
How to Set Time, Weight, and Stride Distance
•
Press the MEMORY/▲ Button
to set the weight.
Example: To set
the weight to 145 lbs
Each time you press the Button, the display
of weight will advance by 1 lb.
Keep pressing the Button to fast forward
the display of weight by 10 lbs.
When the display of weight reaches 300,
it will return to 70.
During the weight
If you press the RESET Button, the display setting, the displayed
figures will blink.
of weight will be reset to 88.
• If you leave the unit for more than 5
minutes without setting the weight, the
screen will show the number of steps
while the display of weight
remains unchanged.
3.
How to set the Stride Distance
Setting range: 1'00'' to 4'00'' feet
•
Press the SET Button to change
to the setting of stride length.
The display of “stride” will blink.
The initial stride
length is set to 1'08''.
During the stride
length setting,
the displayed
figures will blink.
Before Using the Unit
17
How to Set Time, Weight, and Stride Distance
•
Press the MEMORY/▲ Button
to set the stride length.
Each time you press the Button, the display
of stride length will advance by 1''.
Keep pressing the Button to fast forward the
display of stride length by 1'.
If the display of stride length reaches 4'00'',
it will return to 1'00'.
If you press the RESET Button, the display
of stride length will be reset to 1'08''.
• If you leave the unit for more than 5
minutes without setting the stride
length, the screen will show the number
of steps while the display of stride
length remains unchanged.
•
Example: To set the
stride length
to 1'10''
During the stride
length setting, the
displayed figures
will blink.
Press the SET Button to change to the
display of number of steps.
Display of the number of steps and display
of time will be turned on.
Now all the settings are finished.
How to change time, weight, or stride distance after the
setting is completed:
1. Press the MODE Button to display the number of steps.
2. Press the SET Button for more than 1.5 seconds.
3. Change the setting.
• If an item that does not need to be changed is displayed, press the
SET Button, then the display will change to the next item to be set.
18
Before Using the Unit
How to Use the Unit
Procedures in Actual Use
1.
2.
3.
Press the RESET Button for more than 1.5
seconds to set the display of the number of
steps, number of aerobic steps, duration of
aerobic walk, calorie, and distance to 0.
Attach main unit properly.
(Refer to How to Attach the Pedometer)
Start walking.
The unit will count the number of aerobic
steps, calorie, and distance.
• To measure the number of steps during
jogging, attach a holder to the main unit
and securely attach the unit to your belt
or the top of your pants.
The unit’s display will not change or display steps until after you
have walked for more than 4 seconds.
How to Use the Unit
19
Procedures in Actual Use
Press the MODE Button
to change the display
Each time you press the MODE Button,
the display will change.
Number of steps
Number of
aerobic steps
Caloric
Press the RESET Button for
more than 1.5 seconds.
All the data (number of steps, number
of aerobic steps, duration of steady walk,
calorie, and distance) of today will be reset to 0.
• The memory data accumulated up to the previous
day will not be deleted.
20
How to Use the Unit
Distance
Memory Function
The unit can store the data of seven days starting with the oldest
day to the previous day on number of steps, number of aerobic
steps, calorie, and distance.
The data (number of steps, number of aerobic steps, calorie, and
distance) of today are automatically stored in the memory when
the time reaches 0:00, and the display will return to 0.
• You do not need to press the RESET Button everyday.
• Be sure to set the time in advance.
1.
2.
Press the MODE Button to select the
display contents you want to see.
Example: To see the
data on the
number of steps
Press the MEMORY/▲ Button.
Each time you press the MEMORY/▲
Button, you can see the data of
seven days from the oldest day to
the previous day.
• The memory only stores the
aerobic steps.
• The time is not displayed during
the memory display.
• During the memory display, the
number of steps are not counted.
• If no operation of the Button
is conducted for more than
1 minute, the display will
return to the normal display.
How to Use the Unit
21
Memory Function
If you want to return to the screen before
the memory display
Press the MODE Button.
If you want to delete the memory
Press the SYSTEM RESET Button on the back
of the main unit with a firm stick that is
not easily breakable.
If you press the SYSTEM RESET Button,
all the past memory data and the set data (time,
weight, and stride distance) will be deleted.
Set time, weight, and stride distance again.
When the unit is affected by static electricity or electric noise,
the memory data or the set data may be changed or deleted.
We recommend that you write down the important memory
data on your notepad or notebook.
22
How to Use the Unit
Troubleshooting
How to Care and Store the Unit
How to Care for the Unit
Always keep the unit clean for use.
If the unit is heavily stained, use a cloth
moistened with water or detergent and squeeze
it well before wiping the stain, then wipe the
unit dry with another soft cloth.
• Be careful so that water should not get
into the main unit.
• Do not use benzine, thinner, or gasoline
to clean on the unit. Wipe any stains off
with a soft dry cloth.
Thinner
Benzin
Gasoline
How to Store the Unit
Do not place the unit for storage in the
following conditions:
• Do not store the unit in a location where
it is exposed to direct sunlight, high
temperatures, high humidity, dust, water,
heavy vibrations, or where chemicals or
corrosive gas is generated.
Keep the unit out of reach of young children.
• OMRON cannot take responsibility if you fail to observe the
above-mentioned notes and other correct method of using the unit.
Troubleshooting
23
Troubleshooting
Trouble
Probable cause
A
mark
blinks.
The battery is worn.
Nothing is
displayed.
The displayed
values are wrong.
The polarities of
battery (+ and -)
are aligned in the
wrong directions.
How to correct
Replace the battery with
a new one (CR2032).
Insert the battery in
correct alignment.
The battery is worn.
Replace the battery with
a new one (CR2032).
The unit is
attached incorrectly.
Refer to the section
on “How to Attach
the Pedometer.”
You are
walking at an
inconsistent pace.
Try to walk regularly
in a consistent rhythm
all the time.
The set values
are wrong.
Change the setting.
The displayed
Press the SYSTEM RESET Button.
contents are wrong.
24
Troubleshooting
Specifications
Model
OMRON Pedometer
Type
HJ-112
Power Supply
3 VDC (1 lithium battery CR2032)
Measurement Range
Number of steps:
Number of steady steps:
Duration of steady walk:
Distance:
Calorie:
Time:
Memory
Number of steps:
Number of steady steps:
Calorie:
Distance:
Setting Range
Time:
Weight:
Stride distance:
0 to 99,999 steps
0 to 99,999 steps
0 to 1,440 minutes
0.00 to 999.99 miles
0 to 99,999 kcal
AM 12:00 to PM 11:59
from seven days ago to the previous day
from seven days ago to the previous day
from seven days ago to the previous day
from seven days ago to the previous day
AM 12:00 to PM 11:59 (12-hour display)
70 to 300 lbs (in the unit of 1 lb)
1'00'' to 4'00'' (in the unit of 1'')
Operating Temperature
14°F to 104°F (-10°C to +40°C)
Precision of Step Counting
Within +/- 5% (by vibration testing machine)
Time Precision
Within +/- 30 seconds of the average monthly
deviation (under normal temperature)
Battery Life
Approx. 6 months (when used for walking
10,000 steps a day)
External Dimensions
Approx. 2 7/8'' x 2 1/8'' x 5/8''
Weight
Approx. 1.13 oz (battery not included)
Supplied accessories:
1 battery (CR2032), 1 screwdriver, 1 strap, 1 clip for strap, 1 holder,
1 Instruction Manual, 1 Warranty Card.
• In the interest of product improvement, specifications are subject to
change without notice.
Troubleshooting
25
Caution
Changes or modifications not expressly approved by OMRON
Healthcare, Inc. could void the user’s warranty.
NOTE:
POTENTIAL FOR RADIO/TELEVISION INTERFERENCE (for U.S.A. only)
This product has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. The product generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If the product does cause harmful interference to radio or
television reception, which can be determined by turning the product on and
off, the user is encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the product and receiver.
• Connect the product into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
POTENTIAL FOR RADIO/TELEVISION INTERFERENCE (for Canada only)
This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus as set out in the interference-causing
equipment standard entitled “Digital Apparatus”, ICES-003 of the Canadian
Department of Communications.
26
Troubleshooting
Limited One Year Warranty
Your HJ-112 Omron Pedometer is warranted to be free from
manufacturing defects for a period of one year under normal use.
This warranty extends only to the original retail purchaser.
The one year warranty excludes the battery.
Should repair be needed within the warranty period, ship the unit
prepaid with the proof of purchase date and $5.00 for return shipping
and insurance to:
OMRON Healthcare, Inc.
Attn: Repair Department
300 Lakeview Parkway
Vernon Hills, IL 60061
Be sure to include the model number and your phone number
on any correspondence.
We will either repair or replace (at our option) free of charge any parts
necessary to correct defects in the materials or workmanship.
The above warranty is complete and exclusive. The warrantor expressly
disclaims liability for incidental, special, or consequential damages
of any nature. (Some states do not allow the exclusion or limitation
of incidental or consequential damages, so the above warranty may
not apply to you.)
Any implied warranties arising by the operation of law shall be limited
in duration to the term of this warranty. (Some states do not allow
limitations on how long an implied warranty lasts, so the above
limitation may not apply to you.)
This warranty gives you specific legal rights, and you may have other
rights which vary from state to state. As a condition to operation of your
warranty, the enclosed registration card must be completed and sent to us
within 10 days from the date of purchase.
For Customer Service
By phone toll free:
By using the Feedback Form at:
1-800-634-4350
www.omornhealthcare.com
Troubleshooting
27
Manufactured by OMRON
Distributed by:
OMRON HEALTHCARE, INC.
300 Lakeview Parkway
Vernon Hills, Illinois 60061
www.omronhealthcare.com
Copyright © 2003 OMRON HEALTHCARE, INC.
112INST Rev A
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement