Omron | M1 Compact | User's Manual | Omron M1 Compact User's Manual

HEM-4022-IM_Main_[D].book
1 ページ
2011年11月2日 水曜日 午後3時24分
Manual Inflation Blood Pressure Monitor
Model M1 Compact
• Instruction Manual
• Mode d’emploi
• Gebrauchsanweisung
• Manuale di istruzioni
• Manual de instrucciones
• Gebruiksaanwijzing
• РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ
• Instrukcja
• Kezelési Útmutató
EN
FR
DE
IT
ES
NL
RU
PL
HU
AR
IM-HEM-4022-E-04-10/2011
1664455-7D
HEM-4022-IM_Main_[D].book
2 ページ
2011年11月2日 水曜日 午後3時24分
Contents
Before using the unit
Introduction .................................................................................. 3
Important Safety Information...................................................... 4
1. Overview .................................................................................. 6
2. Preparation .............................................................................. 9
2.1 Installing/Replacing the Batteries........................................ 9
Operating instructions
3. Using the Unit........................................................................ 11
3.1 How to Sit Correctly When Taking a Measurement .......... 11
3.2 Applying the Arm Cuff ....................................................... 13
3.3 Taking a Reading .............................................................. 15
3.4 Using the Memory Function .............................................. 20
4. Quick Reference Guide ........................................................ 23
Care and maintenance
5. Handling Errors and Problems ............................................ 24
5.1 Error Messages................................................................. 24
5.2 Troubleshooting ................................................................ 26
6. Maintenance and Storage .................................................... 28
7. Optional Parts ....................................................................... 30
8. Technical Data....................................................................... 31
9. Some Useful Information about Blood Pressure ............... 33
2
HEM-4022-IM_Main_[D].book
3 ページ
2011年11月2日 水曜日 午後3時24分
Before using the unit
Introduction
Thank you for purchasing the OMRON M1 Compact Upper Arm Blood
Pressure Monitor.
The OMRON M1 Compact is a manual inflation blood pressure monitor,
operating on the oscillometric principle. It measures your blood
pressure and pulse rate simply and quickly.
The unit also stores up to 14 measurements in memory.
Please read this instruction manual thoroughly before using
the unit. For specific information about your own blood
pressure, CONSULT YOUR DOCTOR.
EN
3
HEM-4022-IM_Main_[D].book
4 ページ
2011年11月2日 水曜日 午後3時24分
Important Safety Information
Consult your doctor during pregnancy, arrhythmia and arteriosclerosis.
You should never change the dosage of medication prescribed by your
doctor.
Please read this section carefully before using the unit.
Warning:
• Indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury.
(General Usage)
• Always consult your doctor. Self-diagnosis of measurement results
and self-treatment are dangerous.
• People with severe blood flow problems, or blood disorders, should
consult a doctor before using the unit. Cuff inflation can cause internal
bleeding.
(Battery Usage)
• If battery fluid should get in your eyes, immediately rinse with plenty of
clean water. Consult a doctor immediately.
Caution:
• Indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injury to the user or patient or damage to
the equipment or other property.
(General Usage)
• Do not leave the unit unattended with infants or persons who cannot
express their consent.
• Do not use the unit for any purpose other than measuring blood
pressure.
• Do not disassemble the unit, arm cuff or inflation bulb.
• Use only the approved arm cuff for this unit. Use of other arm cuffs
may result in incorrect measurement results.
• Make sure that the air tube is not wrapped around other parts of your
body when taking measurements at night. This could result in injury
when the air pressure in the air tube is increased.
• Do not wrap the arm cuff tightly when taking measurements at night.
This could result in injury.
4
HEM-4022-IM_Main_[D].book
5 ページ
2011年11月2日 水曜日 午後3時24分
Important Safety Information
• Do not inflate the arm cuff over 299 mmHg. If the cuff is over inflated,
it can cause internal bleeding.
• Do not use a mobile phone near the unit. This could cause a
malfunction.
(Battery Usage)
• If battery fluid should get on your skin or clothing, immediately rinse
with plenty of clean water.
• Use only four “AAA” alkaline batteries with this unit. Do not use other
types of batteries.
• Do not insert the batteries with their polarities incorrectly aligned.
• Replace old batteries with new ones immediately. Replace all four
batteries at the same time.
• Remove the batteries if the unit will not be used for three months or
more.
• Do not use new and used batteries together.
General Precautions
• Do not operate unit in a moving vehicle (car, airplane).
• Do not apply strong shocks and vibrations to or drop the unit and arm
cuff.
• Do not take measurements after bathing, drinking alcohol, smoking,
exercising or eating.
EN
• Do not forcibly bend the arm cuff or bend the air tube excessively.
• When removing the air tube, pull on the edge of the tube at the
connection with the main unit not the middle of the tube.
• Do not inflate the arm cuff when it is not wrapped around your arm.
• Do not wash the arm cuff or immerse it in water.
• Read and follow the “Important information regarding Electro
Magnetic Compatibility (EMC)” in the Technical Data Section.
• Read and follow the “Correct Disposal of This Product” in the
Technical Data Section when disposing of the device and any used
accessories or optional parts.
5
HEM-4022-IM_Main_[D].book
6 ページ
2011年11月2日 水曜日 午後3時24分
1.Overview
1. Overview
Main unit
A
E
D
B
C
A. Display
B. I/O button (Power switch)
C. Air connector for cuff and
inflation bulb
D. M (Memory) button
E. Battery compartment
Arm Cuff
F
F.
G
Arm cuff
(Medium cuff: arm circumference 22-32 cm)
G. Air Tube
6
HEM-4022-IM_Main_[D].book
7 ページ
2011年11月2日 水曜日 午後3時24分
1.Overview
Inflation Bulb
I
H
J
H. Air Release Button
I. Air Tube
J. Air Inflation Bulb
Display
K
L
O
M
N
Q
P
R
S
K. Systolic blood pressure
L. Diastolic blood pressure
M. Memory symbol
EN
O. Heartbeat symbol
1. Flashes during measurement
2. If flashing after measurement
completed or when viewing
results stored in the memory,
indicates blood pressure out of
recommended range*
Displayed when viewing values
stored in memory
N. Battery low symbol
P.
Q.
R.
S.
Pulse display
Deflation symbol
Reinflation symbol
Irregular heartbeat symbol
* Note: If your systolic or diastolic
pressure is outside the
standard range (above
135/85 mmHg) the Heartbeat
symbol (
) will blink.
Please refer to Chapter 3.3.7.
7
HEM-4022-IM_Main_[D].book
8 ページ
2011年11月2日 水曜日 午後3時24分
1.Overview
Package contents (others)
T
T. Storage case
U. Four “AAA” alkaline (LR03)
batteries
8
U
• Instruction manual
• Guarantee card
• Blood pressure pass
HEM-4022-IM_Main_[D].book
9 ページ
2011年11月2日 水曜日 午後3時24分
2.Preparation
2. Preparation
Installing/Replacing the Batteries
2.1
1.
Turn the main unit upside down.
2.
Slide the battery cover in the
direction of the arrow while
pressing the ribbed part of the
cover.
3.
Install or replace four “AAA”
size batteries so that the
+ (positive) and - (negative)
polarities match the polarities
indicated on the battery
compartment.
4.
Put the battery cover back in place.
Slide the battery cover as indicated, until it clicks into place.
EN
Note: The measurement values continue to be stored in
memory even after the batteries are replaced.
9
HEM-4022-IM_Main_[D].book
10 ページ
2011年11月2日 水曜日 午後3時24分
2.Preparation
Battery Life & Replacement
If the battery low symbol (
) appears on the display, replace all four
batteries at the same time.
- When the battery low symbol (
) starts to blink, you will still be
able to use the unit for a short while. You should replace the
batteries with new ones ahead of time.
- When the symbol (
) remains lit, the batteries are exhausted. You
should replace the batteries with new ones at once.
• Remove the batteries if the unit will not be used for three months or
more.
• Dispose of batteries according to applicable local regulations.
Four new “AAA” alkaline batteries will last for approximately 1500
measurements, when used to take two measurements a day.
Since the supplied batteries are for monitoring use only, they may have
a shorter life and not last for 1500 measurements.
10
HEM-4022-IM_Main_[D].book
11 ページ
2011年11月2日 水曜日 午後3時24分
Operating instructions
3.Using the Unit
3. Using the Unit
3.1
How to Sit Correctly When Taking a Measurement
Correct posture during measurement is necessary to get accurate
results.
Notes:
• Measurements should be taken in a quiet place and you should be in
a relaxed, seated position. Make sure that the room is not too hot or
too cold.
• Avoid eating, drinking alcohol, smoking, or exercising for at least 30
minutes before taking a measurement.
• Do not move or talk during measurement.
Correct
Posture
Sit upright
with your
back straight.
Remove tight fitting clothing from
your upper arm, and any thick
clothing such as a sweater.
Do not place the cuff over thick
clothes and do not roll up your
sleeve if it is too tight.
Place your arm on a table so
that the cuff will be at the same
level as your heart.
EN
The gap between the
chair and the top of the
table should be between
25cm to 30cm.
11
HEM-4022-IM_Main_[D].book
12 ページ
2011年11月2日 水曜日 午後3時24分
3.Using the Unit
Note: You can take a measurement on either your left or right
arm. The blood pressure can differ between the right
arm and the left arm and therefore also the measured
blood pressure values can be different. Omron
recommends to always use the same arm for
measurement. If the values between the two arms differ
substantially, please check with your physician which
arm to use for your measurement.
Incorrect Posture
• Arched back (leaning forwards)
• Sitting cross-legged
• Sitting on a sofa or at a low table
so that you tend to lean forward
These situations could lead to higher blood pressure
values due to strain or the arm cuff being lower than the
heart.
If the arm cuff is at a lower position than your heart use
cushions etc., to adjust the height of your arm.
12
HEM-4022-IM_Main_[D].book
13 ページ
2011年11月2日 水曜日 午後3時24分
3.Using the Unit
3.2
Applying the Arm Cuff
Be sure to wrap the arm cuff correctly so that you get accurate results.
Measurements can be taken in light clothing. However, please remove
thick clothes, such as sweaters, before taking a reading.
1.
Connect the air tube of the arm cuff and the inflation bulb to
their respective air connectors.
2.
Put your left arm through the cuff
loop.
Note: If the cuff is not assembled,
pass the end of the cuff
furthest from the tubing
through the metal D-ring to
form a loop. The smooth
cloth should be on the inside
of the cuff loop.
EN
13
HEM-4022-IM_Main_[D].book
14 ページ
2011年11月2日 水曜日 午後3時24分
3.Using the Unit
3.
Position the arm correctly.
1) The air tube should run
down the inside of your
forearm and be in line with
your middle finger.
2) The bottom of the cuff
should be approximately 1
to 2 cm above your elbow.
3) Apply the cuff to your
upper arm so that the
coloured marker (blue
arrow under tube) is
centered on the middle of
your inner arm and points
down the inside of the
arm.
Taking measurements on the right arm
Apply the cuff so that the
air tube is at the side of
your elbow.
• Be careful not to rest
your arm on the air
tube, or otherwise
restrict the flow of air to
the cuff.
• The cuff should be 1 to
2 cm above the elbow.
4.
14
1 to 2 cm
When the cuff is positioned correctly, close the fabric fastener
FIRMLY.
HEM-4022-IM_Main_[D].book
15 ページ
2011年11月2日 水曜日 午後3時24分
3.Using the Unit
3.3
Taking a Reading
1.
Preparation
1) Press the air release button to release any air in the arm
cuff.
2) Press the I/O button to turn the unit on.
3) All items in the display will be displayed briefly.
4) The deflation symbol will flash.
5) Finally, the heartbeat symbol will appear and 0 is
displayed.
Note: If the deflation symbol does not disappear soon, press
the air release button to release any air in the arm cuff.
2.
Pump the inflation bulb to inflate the arm cuff.
EN
1) Inflate the cuff until it is 30 to
40 mmHg above your expected
systolic blood pressure value.
ex) If your expected blood
pressure is around 140mmHg,
inflate the arm cuff to between
170 and 180 mmHg. Inflate the
cuff rapidly so that the pressure
is reached in about five seconds.
2) When the desired pressure has been achieved, release
the inflation bulb. Remain still and do not talk.
15
HEM-4022-IM_Main_[D].book
16 ページ
2011年11月2日 水曜日 午後3時24分
3.Using the Unit
Notes:
• If the reinflation symbol (
) appears, squeeze the inflation
bulb to re-inflate the arm cuff.
• Do not inflate the arm cuff more than necessary.
3.
Measurement starts.
Measurement starts
automatically after you stop
inflating the arm cuff. Decreasing
numbers appear on the display
and the heartbeat symbol
flashes.
Remain still and do not talk
during measurement.
Note: To cancel a measurement, press the I/O button to turn
off the unit and press the air release button to release
the air in the arm cuff.
4.
Measurement ends.
When the measurement is finished,
the deflation symbol flashes on the
display. Blood pressure and pulse
rate values are displayed.
Press the air release button to
release the air in the arm cuff until
the deflation symbol is no longer
displayed.
16
HEM-4022-IM_Main_[D].book
17 ページ
2011年11月2日 水曜日 午後3時24分
3.Using the Unit
5.
Check the measurement
results.
The unit automatically stores
blood pressure and pulse rate
into its memory, Refer to “3.4
Using the Memory Function”.
Systolic blood
pressure
Diastolic blood
pressure
Pulse display
Note: Wait 2-3 minutes before taking another blood pressure
measurement. Waiting between readings allows the
arteries to return to the condition prior to taking the
blood pressure measurement.
Warning:
Self-diagnosis of measured results and treatment are
dangerous. Please follow the instructions of your doctor.
Common Causes of Inaccurate Results
Arm cuff is too loose. Movement or talking
during measurement.
Leaning forwards.
EN
Note:
If the arm cuff is at a lower position
than your heart use cushions etc., to
adjust the height of your arm.
6.
Undo the fastener and remove the arm cuff.
7.
Press the I/O button to turn the unit off.
Note: If you forget to turn the unit off, it will automatically shut
itself off after five minutes.
17
HEM-4022-IM_Main_[D].book
18 ページ
2011年11月2日 水曜日 午後3時24分
3.Using the Unit
Important:
• If your systolic or diastolic pressure is
outside the standard range, the heartbeat
symbol will blink when the measurement
result is displayed.
Recent research suggests that the
following values can be used as a guide to
high blood pressure for measurements
taken at home.
Systolic Blood Pressure
Above 135 mmHg
Diastolic Blood Pressure
Above 85 mmHg
This criteria is for home blood pressure measurement.
For professional office blood pressure measurement criteria,
please refer to Chapter 9 “Some Useful Information about
Blood Pressure”
• Your blood pressure monitor includes an
irregular heartbeat feature. Irregular
heartbeats can influence the results of the
measurement. The irregular heartbeat
algorithm automatically determines if the
measurement is usable or needs to be
repeated. If the measurement results are
affected by irregular heartbeats but the
result is valid, the result is shown together with the irregular
heartbeat symbol (
). If the irregular heartbeats cause
the measurement to be invalid, no result is shown. If the
irregular heartbeat symbol (
) is shown after you have
taken a measurement, repeat the measurement. If the
irregular heartbeat symbol (
) is shown frequently,
please make your doctor aware of it.
18
HEM-4022-IM_Main_[D].book
19 ページ
2011年11月2日 水曜日 午後3時24分
3.Using the Unit
What is Irregular Heartbeat?
An irregular
Normal Heartbeat
heartbeat is a
Pulse
heartbeat rhythm
that varies by more
Blood pressure
than 25% from the
Irregular Heartbeat
average heartbeat
Short Long
rhythm detected
Pulse
while the unit is
measuring the
Blood pressure
systolic and diastolic
blood pressure.
If such an irregular rhythm is detected more than twice during
measurement, the irregular heartbeat symbol (
) appears
on the symbol when the measurement results are displayed.
What is Arrhythmia?
A heartbeat is stimulated by electrical signals that cause the
heart to contract.
Arrhythmia is a condition where the heartbeat rhythm is
abnormal due to flaws in the bio-electrical system that drives
the heartbeat. Typical symptoms are skipped heartbeats,
premature contraction, an abnormally rapid (tachycardia) or
slow (bradycardia) pulse. This can be caused by heart
disease, aging, physical predisposition, stress, lack of sleep,
fatigue etc. Arrhythmia can only be diagnosed by a doctor
through a special examination.
Whether the appearance of the irregular heartbeat symbol
(
) in the results indicates arrhythmia or not can only be
determined by an examination and diagnosis by your doctor.
Warning:
If the irregular heartbeat symbol (
) is shown
frequently, please make your doctor aware of it.
Conducting self-diagnosis and treatment based on
measurement results is dangerous. Be sure to follow the
instructions of your doctor.
19
EN
HEM-4022-IM_Main_[D].book
20 ページ
2011年11月2日 水曜日 午後3時24分
3.Using the Unit
3.4
Using the Memory Function
The unit automatically stores up to 14 sets of measurement values
(blood pressure and pulse rate). When 14 sets of measurement values
are stored, the oldest record is deleted to save the most recent values.
1.
Press the I/O button to turn the
power on.
2.
When the heartbeat symbol
appears on the display, press the
M button.
The result from the most recent
measurement is displayed.
Note: If there are no measurements results stored
in memory, the screen to the right is
displayed.
Important: If your systolic or
diastolic pressure is
outside the standard
range, the heartbeat
symbol will blink when
the measurement
result is displayed.
Refer to 3.3, number 7.
20
HEM-4022-IM_Main_[D].book
21 ページ
2011年11月2日 水曜日 午後3時24分
3.Using the Unit
3.
Press the M button
repeatedly to cycle through
the previous measurement
results.
Keep the button pressed
down to cycle rapidly
through the previous results.
If the irregular heartbeat symbol was displayed after a
measurement, it will also be stored in the memory with the
result of that measurement.
4.
Press the I/O button to turn the unit off.
Note: If you forget to turn the unit off, it will automatically shut
itself off after five minutes.
EN
21
HEM-4022-IM_Main_[D].book
22 ページ
2011年11月2日 水曜日 午後3時24分
3.Using the Unit
To Delete All the Values Stored in Memory
You cannot delete individual stored readings, all the readings in the unit
will be deleted.
1.
Press the l/O button to turn the unit on.
2.
When the heartbeat symbol (
)
appears on the display, first press
the M button. Then while holding it
down, press the I/O button
simultaneously for about 2-3
seconds. All readings will then be
deleted.
1
2
Important: Be careful not to press
the I/O button first. If
the I/O button is
pressed first, the
monitor is shut off.
3.
Press the I/O button to turn the unit off.
Note: If you forget to turn the unit off, it will automatically shut
itself off after five minutes.
22
HEM-4022-IM_Main_[D].book
23 ページ
2011年11月2日 水曜日 午後3時24分
4.Quick Reference Guide
4. Quick Reference Guide
Use this as a quick reference guide only. If you are using this
device for the first time, please read carefully Chapter 3 of this
Instruction Manual.
To help ensure a reliable reading, avoid eating, drinking alcohol,
smoking, or exercising for at least 30 minutes before taking a
measurement.
Note: Remove any tight-fitting clothing from your upper arm.
1.
Sit on a chair with your
feet flat on the floor and
place your arm on a
table so that the arm cuff
will be at the same level
as your heart.
2.
Apply the arm cuff to your upper arm. The coloured marker
should be centred on the inside of your arm and point down
the inside of the arm, so that the air tube runs down the inside
of your forearm and is in line with your middle finger.
3.
Secure the cuff around your arm using the fabric fastener
strip.
4.
Press the I/O button to turn the unit
on, then pump the inflation bulb to
inflate the cuff.
EN
After measurement is complete and
the measurement results are
displayed, press the air release button
to release any air in the cuff.
5.
Press the I/O button to turn the unit off.
Note: Always wait at least 2-3 minutes before taking another
blood pressure measurement.
23
HEM-4022-IM_Main_[D].book
24 ページ
2011年11月2日 水曜日 午後3時24分
Care5.Handling
and maintenance
Errors and Problems
5. Handling Errors and Problems
5.1
Error Messages
Error Display
Blinks or
appears
continuously
24
Cause
Remedy
Cuff is under inflated.
Press air release button and
restart the measurement with a
higher inflation level. Carefully
read steps under section 3.3.
Movement during
measurement
Repeat measurement. Remain
still and do not talk during
measurement.
Refer to section 3.3.
Air tube disconnected.
Insert the air tube securely.
Refer to section 3.2.
Arm cuff not applied
correctly.
Apply the arm cuff correctly.
Refer to section 3.2.
Clothing is interfering
with the arm cuff.
Remove any clothing
interfering with the arm cuff.
Refer to section 3.2.
Air is leaking from the
arm cuff.
Replace cuff with new one.
Refer to Chapter 7.
The arm cuff was
inflated above
299 mmHg.
Release your hand from the air
inflation bulb before the
pressure reaches 299 mmHg.
Refer to section 3.3.
Battery power is low.
Replace all four “AAA”
batteries with new ones.
Refer to section 2.1.
HEM-4022-IM_Main_[D].book
25 ページ
2011年11月2日 水曜日 午後3時24分
5.Handling Errors and Problems
Error Display
Cause
Remedy
Device error.
Contact your OMRON retail
outlet or distributor.
Refer to Chapter 8.
Pressure is too low.
Press the inflation bulb to
inflate the arm cuff until the
reinflation symbol goes out. Or,
deflate the arm cuff and repeat
measurement after checking
that the heartbeat symbol (
)
has been displayed.
Refer to section 3.3.
Note: The irregular heartbeat symbol (
displayed with error messages.
) may also be
EN
25
HEM-4022-IM_Main_[D].book
26 ページ
2011年11月2日 水曜日 午後3時24分
5.Handling Errors and Problems
5.2
Troubleshooting
Problem
The reading is
extremely low (or
high).
Arm cuff pressure
does not rise.
Arm cuff deflates too
soon.
Cannot measure or
readings are too low
or too high.
26
Cause
Remedy
Arm cuff not applied
correctly.
Apply the arm cuff
correctly.
Refer to section 3.2.
Movement or talking
during measurement.
Remain still and do not
talk during
measurement.
Refer to section 3.3.
Clothing is interfering
with the arm cuff.
Remove any clothing
interfering with the arm
cuff.
Refer to section 3.1.
Is the air tube
securely connected
into the main unit?
Make sure that the air
tube is connected
securely.
Refer to section 3.2.
Air is leaking from the
arm cuff.
Replace the arm cuff
with a new one.
Refer to Chapter 7.
The arm cuff is loose.
Apply the cuff correctly
so that it is firmly
wrapped around the
arm.
Refer to section 3.2.
Has the arm cuff
been inflated
sufficiently?
Inflate the cuff so that it
is 30 to 40 mmHg
above your previous
measurement result.
Refer to section 3.3.
Is the air release
button being pressed
during inflation?
Be careful not to press
the air release button
during measurement.
HEM-4022-IM_Main_[D].book
27 ページ
2011年11月2日 水曜日 午後3時24分
5.Handling Errors and Problems
Problem
The unit loses power
during measurement.
Nothing happens
when you press the
buttons.
Other problems.
Cause
Remedy
The batteries are
empty.
Replace the batteries
with new ones.
Refer to section 2.1.
The batteries are
empty.
Replace the batteries
with new ones.
Refer to section 2.1.
The batteries have
been inserted
incorrectly.
Insert the batteries with
the correct (+/ -)
polarity.
Refer to section 2.1.
Press the I/O button and repeat measurement.
If the problem continues, try replacing the
batteries with new ones.
If this still does not solve the problem, contact
your OMRON retail outlet or distributor.
EN
27
HEM-4022-IM_Main_[D].book
28 ページ
2011年11月2日 水曜日 午後3時24分
6.Maintenance and Storage
6. Maintenance and Storage
Maintenance
To protect your unit from damage, please observe the following:
• Do not subject the main unit, cuff and inflation bulb to extreme
temperatures, humidity, moisture or direct sunlight.
• Do not fold the cuff or tubing tightly.
• Do not inflate the arm cuff over 299 mmHg.
• Do not disassemble the unit.
• Do not subject the unit to strong shocks or vibrations (for example,
dropping the unit on the floor).
• Do not use volatile liquids to clean the main unit. The unit should be
cleaned with a soft, dry cloth.
• Use a soft, moistened cloth and soap to clean the arm cuff.
• Do not wash the arm cuff or immerse it in water.
• Do not use petrol, thinners or similar solvents to clean the arm cuff.
• Do not carry out repairs of any kind yourself. If a defect occurs,
consult your OMRON retail outlet or distributor as mentioned on the
packaging.
Calibration and Service
• The accuracy of this blood pressure monitor has been carefully tested
and is designed for a long service life.
• It is generally recommended to have the unit inspected every two
years to ensure correct functioning and accuracy. Please consult your
authorised OMRON dealer or the OMRON Customer Service at the
address given on the packaging or attached literature.
28
HEM-4022-IM_Main_[D].book
29 ページ
2011年11月2日 水曜日 午後3時24分
6.Maintenance and Storage
Storage
Keep the unit in its storage case when not in use.
1.
Unplug the air tube from the air connector.
2.
Gently fold the air tube into the
arm cuff.
Note: Do not bend the air tube
excessively.
3.
Place the arm cuff, inflation bulb
and main unit in the storage case.
Do not store the unit in the following situations:
EN
• If the unit is wet.
• Locations exposed to extreme temperatures, humidity, direct sunlight,
dust or corrosive vapours.
• Locations exposed to vibrations, shocks or where it will be at an
angle.
• Locations exposed to chemicals or corrosive vapours.
29
HEM-4022-IM_Main_[D].book
30 ページ
2011年11月2日 水曜日 午後3時24分
7.Optional Parts
7. Optional Parts
Medium Arm Cuff
Arm circumference
22 - 32 cm
CM-4997086-7
Large Arm Cuff
Arm circumference
32 - 42 cm
CL-4997065-4
Small cuff and bulb combination
Arm circumference 17 - 22 cm
4997099-9
Small Arm Cuff
Arm circumference
17 - 22 cm
CS-4997076-0
Regular bulb
4997965-1
Note: You need a special bulb for a small cuff.
When you use a small cuff, please replace a cuff and a bulb
together.
30
HEM-4022-IM_Main_[D].book
31 ページ
2011年11月2日 水曜日 午後3時24分
8.Technical Data
8. Technical Data
Product Description
Model
Display
Measurement Method
Measurement Range
Memory
Accuracy
Inflation
Deflation
Pressure Detection
Power Source
Battery life
Operating temperature/
Humidity
Storage temperature/
Humidity/ Air Pressure
Console Weight
Cuff Weight
Outer Dimensions
Cuff Dimensions
Package Content
Manual Inflation Blood Pressure Monitor
OMRON M1 Compact (HEM-4022-E)
LCD Digital Display
Oscillometric method
Pressure: 0 mmHg to 299 mmHg
Pulse: 40 to 180/min.
14 Measurements
Pressure: 3 mmHg
Pulse:  5% of display reading
Manual by inflation bulb
Automatic pressure release valve
Capacitive pressure sensor
4 “AAA” batteries 1.5V
Capacity of new alkaline batteries is approx. 1500
measurements
10°C to 40°C/ 30 to 85% RH
-20°C to 60°C/ 10 to 95% RH/ 700-1060 hPa
Approximately 126g without batteries
Approximately 130g
Approximately 86 (w) mm  75 (h) mm  109 (l) mm
Approximately 146 mm  446 mm
(Medium cuff: arm circumference 22 to 32 cm)
Main unit, medium cuff, instruction manual, storage
case, battery set, guarantee card, blood pressure pass,
regular bulb.
Note: Subject to technical modification without prior notice
• This OMRON product is produced under the strict quality system of OMRON
Healthcare Co. Ltd., Japan. The Core component for OMRON blood pressure
monitors, which is the Pressure Sensor, is produced in Japan for assembly.
• Disposal of this product and used batteries should be carried out in
accordance with the national regulations for the disposal of electronic
products.
= Type
TypeBB
This device fulfils the previsions of EC directive 93/42/EEC (Medical
Device Directive). This blood pressure monitor is designed according to the
European Standard EN1060, Non-invasive sphygmomanometers Part 1: General
Requirements and Part 3: Supplementary requirements for electromechanical blood
pressure measuring systems.
Caution: Please read the instruction manual carefully before
using the device.
31
EN
HEM-4022-IM_Main_[D].book
32 ページ
2011年11月2日 水曜日 午後3時24分
8.Technical Data
Important information regarding Electro
Magnetic Compatibility (EMC)
With the increased number of electronic devices such as PC’s and mobile
(cellular) telephones, medical devices in use may be susceptible to
electromagnetic interference from other devices. Electromagnetic interference
may result in incorrect operation of the medical device and create a potentially
unsafe situation.
Medical devices should also not interfere with other devices.
In order to regulate the requirements for EMC (Electro Magnetic Compatibility)
with the aim to prevent unsafe product situations, the EN60601-1-2 standard
has been implemented. This standard defines the levels of immunity to
electromagnetic interferences as well as maximum levels of electromagnetic
emissions for medical devices.
This medical device manufactured by OMRON Healthcare conforms to this
EN60601-1-2:2001 standard for both immunity and emissions.
Nevertheless, special precautions need to be observed:
• Do not use mobile (cellular) telephones and other devices, which generate
strong electrical or electromagnetic fields, near the medical device. This may
result in incorrect operation of the unit and create a potentially unsafe
situation. Recommendation is to keep a minimum distance of 7 m. Verify
correct operation of the device in case the distance is shorter.
Further documentation in accordance with EN60601-1-2:2001 is available at
OMRON Healthcare Europe at the address mentioned in this instruction
manual.
Documentation is also available at www.omron-healthcare.com.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
This marking shown on the product or its literature, indicates that it
should not be disposed of, with other household wastes at the end of
its working life. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, please separate this from
other types of wastes and recycle it responsibly to promote the sustainable
reuse of material resources.
Household users should contact either the retailer where they purchased this
product, or their local government office, for details of where and how they can
take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract. This product should not be mixed with
other commercial wastes for disposal.
This product does not contain any hazardous substances.
32
HEM-4022-IM_Main_[D].book
33 ページ
2011年11月2日 水曜日 午後3時24分
9.Some Useful Information about Blood Pressure
9. Some Useful Information about Blood Pressure
What is Blood Pressure?
Blood pressure is a measure of the force of blood flowing against the
walls of the arteries. Arterial blood pressure is constantly changing
during the course of the heart’s cycle.
The highest pressure in the cycle is called the Systolic Blood Pressure;
the lowest is the Diastolic Blood Pressure.
Both pressure readings, the Systolic and Diastolic, are necessary to
enable a doctor to evaluate the status of a patient’s blood pressure.
Why is it a Good Thing to measure Blood Pressure at Home?
Having your blood pressure measured by a doctor can cause anxiety
which is itself a cause of high blood pressure. As a variety of conditions
affect blood pressure, a single measurement may not be sufficient for
an accurate diagnosis.
Many factors such as physical activity, anxiety, or the time of day, can
influence your blood pressure. Thus it is best to try and measure your
blood pressure at the same time each day, to get an accurate indication
of any changes in blood pressure. Blood pressure is typically low in the
morning and increases from afternoon to evening. It is lower in the
summer and higher in the winter.
EN
Blood pressure is measured in millimetres of mercury (mmHg) and
measurements are written with the systolic pressure before the diastolic
e.g. A blood pressure written as 135/85, is referred to as 135 over
85 mmHg.
Upper curve: systolic blood pressure
Lower curve: diastolic blood pressure
200
mmHg
150
100
50
6
12
18
24
Time of day
Example: fluctuation within a day (male, 35 years old)
33
HEM-4022-IM_Main_[D].book
34 ページ
2011年11月2日 水曜日 午後3時24分
9.Some Useful Information about Blood Pressure
Classification of Blood Pressure by the World Heath Organization
The World Health Organization (WHO) and the International Society of
Hypertension (ISH) developed the Blood Pressure Classification shown
in this figure.
Systolic blood pressure
(mmHg)
Severe hypertension
180
Moderate hypertension
160
Mild hypertension
140
Normal systolic value
130
120
Normal blood
pressure
Optimal blood
pressure
(target value)
80
85
90
100 110
Diastolic
blood
pressure
(mmHg)
This classification is based on the blood pressure values measured on
people in a sitting position in outpatient departments of hospitals.
Note: There is no universally accepted definition of hypotension.
However, those having the systolic pressure below 100 mmHg
are assumed as hypotensive.
34
HEM-4022-IM_Main_[D].book
35 ページ
2011年11月2日 水曜日 午後3時24分
9.Some Useful Information about Blood Pressure
Manufacturer
OMRON HEALTHCARE Co., Ltd.
53, Kunotsubo, Terado-cho, Muko, Kyoto,
617-0002 JAPAN
EU-representative
OMRON HEALTHCARE EUROPE B.V.
Scorpius 33, 2132 LR Hoofddorp, THE NETHERLANDS
www.omron-healthcare.com
Production facility
OMRON (DALIAN) CO., LTD.
Dalian, CHINA
OMRON HEALTHCARE UK LTD.
Opal Drive, Fox Milne, Milton Keynes, MK15 0DG, U.K.
Subsidiary
OMRON MEDIZINTECHNIK
HANDELSGESELLSCHAFT mbH
John-Deere-Str. 81a, 68163 Mannheim, GERMANY
www.omron-medizintechnik.de
OMRON SANTÉ FRANCE SAS
14, rue de Lisbonne, 93561 Rosny-sous-Bois Cedex
FRANCE
Made in China
35
EN
Download PDF